diff --git linux-libre-5.10-gnu1/.gitignore linux-libre-5.10.150-gnu1/.gitignore
index d01cda8e1177..67d2f3503128 100644
--- linux-libre-5.10-gnu1/.gitignore
+++ linux-libre-5.10.150-gnu1/.gitignore
@@ -55,6 +55,7 @@ modules.order
 /tags
 /TAGS
 /linux
+/modules-only.symvers
 /vmlinux
 /vmlinux.32
 /vmlinux.symvers
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/evm linux-libre-5.10.150-gnu1/Documentation/ABI/testing/evm
index 3c477ba48a31..2243b72e4110 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/evm
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/evm
@@ -49,8 +49,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-ata linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..299e0d1dc161 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-ata
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-iio
index df42bed09f25..53f07fc41b96 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-iio
@@ -142,7 +142,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
deleted file mode 100644
index 73498ff666bd..000000000000
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
+++ /dev/null
@@ -1,62 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the current preset value. Writing sets the
-		preset value. Encoder counts continuously from 0 to preset
-		value, depending on direction (up/down).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		- non-quadrature:
-			Encoder IN1 input servers as the count input (up
-			direction).
-
-		- quadrature:
-			Encoder IN1 and IN2 inputs are mixed to get direction
-			and count.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible active edges.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_polarity
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device encoder/counter active edge:
-
-		- rising-edge
-		- falling-edge
-		- both-edges
-
-		In non-quadrature mode, device counts up on active edge.
-
-		In quadrature mode, encoder counting scenarios are as follows:
-
-		+---------+----------+--------------------+--------------------+
-		| Active  | Level on |      IN1 signal    |     IN2 signal     |
-		| edge    | opposite +----------+---------+----------+---------+
-		|         | signal   |  Rising  | Falling |  Rising  | Falling |
-		+---------+----------+----------+---------+----------+---------+
-		| Rising  | High ->  |   Down   |    -    |   Up     |    -    |
-		| edge    | Low  ->  |   Up     |    -    |   Down   |    -    |
-		+---------+----------+----------+---------+----------+---------+
-		| Falling | High ->  |    -     |   Up    |    -     |   Down  |
-		| edge    | Low  ->  |    -     |   Down  |    -     |   Up    |
-		+---------+----------+----------+---------+----------+---------+
-		| Both    | High ->  |   Down   |   Up    |   Up     |   Down  |
-		| edges   | Low  ->  |   Up     |   Down  |   Down   |   Up    |
-		+---------+----------+----------+---------+----------+---------+
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610 linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
index 8316c33862a0..0aa02bf2bde5 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -39,9 +39,11 @@ KernelVersion:	v5.9
 Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
 Description:
 		(RO) Report various performance stats related to papr-scm NVDIMM
-		device.  Each stat is reported on a new line with each line
-		composed of a stat-identifier followed by it value. Below are
-		currently known dimm performance stats which are reported:
+		device. This attribute is only available for NVDIMM devices
+		that support reporting NVDIMM performance stats. Each stat is
+		reported on a new line with each line composed of a
+		stat-identifier followed by it value. Below are currently known
+		dimm performance stats which are reported:
 
 		* "CtlResCt" : Controller Reset Count
 		* "CtlResTm" : Controller Reset Elapsed Time
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devlink linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-class-devlink
index b662f747c83e..8a21ce515f61 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devlink
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-class-devlink
@@ -5,8 +5,8 @@ Description:
 		Provide a place in sysfs for the device link objects in the
 		kernel at any given time.  The name of a device link directory,
 		denoted as ... above, is of the form <supplier>--<consumer>
-		where <supplier> is the supplier device name and <consumer> is
-		the consumer device name.
+		where <supplier> is the supplier bus:device name and <consumer>
+		is the consumer bus:device name.
 
 What:		/sys/class/devlink/.../auto_remove_on
 Date:		May 2020
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-consumer linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
index 1f06d74d1c3c..0809fda092e6 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../consumer:<consumer> are symlinks to device
 		links where this device is the supplier. <consumer> denotes the
-		name of the consumer in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the consumer in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-memory linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-memory
index 2da2b1fba2c1..16a727a611b1 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-memory
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-memory
@@ -26,8 +26,9 @@ Date:		September 2008
 Contact:	Badari Pulavarty <pbadari@us.ibm.com>
 Description:
 		The file /sys/devices/system/memory/memoryX/phys_device
-		is read-only and is designed to show the name of physical
-		memory device.  Implementation is currently incomplete.
+		is read-only;  it is a legacy interface only ever used on s390x
+		to expose the covered storage increment.
+Users:		Legacy s390-tools lsmem/chmem
 
 What:		/sys/devices/system/memory/memoryX/phys_index
 Date:		September 2008
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-supplier linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
index a919e0db5e90..207f5972e98d 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../supplier:<supplier> are symlinks to device
 		links where this device is the consumer. <supplier> denotes the
-		name of the supplier in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the supplier in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
index 1a04ca8162ad..500d5d8937cb 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -510,6 +510,8 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ac2947b98950..3d5de44cbbee 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -42,5 +42,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created backends.
+                that this option only takes effect on newly connected backends.
                 The default is Y (enable).
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index 28008905615f..1f7659aa085c 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ linux-libre-5.10.150-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -15,5 +15,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created frontends.
+                that this option only takes effect on newly connected frontends.
                 The default is Y (enable).
diff --git linux-libre-5.10-gnu1/Documentation/accounting/psi.rst linux-libre-5.10.150-gnu1/Documentation/accounting/psi.rst
index f2b3439edcc2..860fe651d645 100644
--- linux-libre-5.10-gnu1/Documentation/accounting/psi.rst
+++ linux-libre-5.10.150-gnu1/Documentation/accounting/psi.rst
@@ -92,7 +92,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
index 3ab4f7756a6e..bf878c879afb 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -177,14 +177,20 @@ bitmap_flush_interval:number
 	The bitmap flush interval in milliseconds. The metadata buffers
 	are synchronized when this interval expires.
 
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
 fix_padding
 	Use a smaller padding of the tag area that is more
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-allow_discards
-	Allow block discard requests (a.k.a. TRIM) for the integrity device.
-	Discards are only allowed to devices using internal hash.
+legacy_recalculate
+	Allow recalculating of volumes with HMAC keys. This is disabled by
+	default for security reasons - an attacker could modify the volume,
+	set recalc_sector to zero, and the kernel would not detect the
+	modification.
 
 The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
 allow_discards can be changed when reloading the target (load an inactive
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/devices.txt linux-libre-5.10.150-gnu1/Documentation/admin-guide/devices.txt
index 63fd4e6a014b..8b738855e1c5 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/devices.txt
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/devices.txt
@@ -3003,10 +3003,10 @@
 		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
 		  ...
 		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		192 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		193 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
 		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+		223 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
 
  232 char	Biometric Devices
 		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/index.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/hw-vuln/index.rst
index ca4dbdd9016d..2adec1e6520a 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/hw-vuln/index.rst
@@ -15,3 +15,4 @@ are configurable at compile, boot or run time.
    tsx_async_abort
    multihit.rst
    special-register-buffer-data-sampling.rst
+   processor_mmio_stale_data.rst
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..c98fd11907cc
--- /dev/null
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,260 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+	 Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+	 data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+	 Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+	 Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+	 values as part of MD_CLEAR operations. Processors that do not
+	 enumerate MDS_NO (meaning they are affected by MDS) but that do
+	 enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+	 FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+	 IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+	 bit can be set to cause the VERW instruction to not perform the
+	 FB_CLEAR action. Not all processors that support FB_CLEAR will support
+	 FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities  have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel reuses the MDS function to invoke the buffer clearing:
+
+	mds_clear_cpu_buffers()
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+  ==========  =================================================================
+  full        If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and when entering a VM. Idle transitions are
+              protected as well. It does not automatically disable SMT.
+  full,nosmt  Same as full, with SMT disabled on vulnerable CPUs. This is the
+              complete mitigation.
+  off         Disables mitigation completely.
+  ==========  =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable, but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+     * - 'Unknown: No mitigations'
+       - The processor vulnerability status is unknown because it is
+	 out of Servicing period. Mitigation is not attempted.
+
+Definitions:
+------------
+
+Servicing period: The process of providing functional and security updates to
+Intel processors or platforms, utilizing the Intel Platform Update (IPU)
+process or other similar mechanisms.
+
+End of Servicing Updates (ESU): ESU is the date at which Intel will no
+longer provide Servicing, such as through IPU or other similar update
+processes. ESU dates will typically be aligned to end of quarter.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+  ========================  ===========================================
+  'SMT vulnerable'          SMT is enabled
+  'SMT disabled'            SMT is disabled
+  'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+  ========================  ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..7e061ed449aa 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -407,6 +422,14 @@ The possible values in this file are:
   'RSB filling'   Protection of RSB on context switch enabled
   =============   ===========================================
 
+  - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status:
+
+  ===========================  =======================================================
+  'PBRSB-eIBRS: SW sequence'   CPU is affected and protection of RSB on VMEXIT enabled
+  'PBRSB-eIBRS: Vulnerable'    CPU is vulnerable
+  'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
+  ===========================  =======================================================
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -468,7 +491,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -584,12 +607,13 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   enhanced IBRS
+                eibrs,retpoline         enhanced IBRS + Retpolines
+                eibrs,lfence            enhanced IBRS + LFENCE
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -730,7 +754,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.10.150-gnu1/Documentation/admin-guide/kernel-parameters.txt
index 44fde25bb221..f577c29f2093 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/kernel-parameters.txt
@@ -577,6 +577,12 @@
 			loops can be debugged more effectively on production
 			systems.
 
+	clocksource.max_cswd_read_retries= [KNL]
+			Number of clocksource_watchdog() retries due to
+			external delays before the clock will be marked
+			unstable.  Defaults to three retries, that is,
+			four attempts to read the clock under test.
+
 	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
@@ -1611,6 +1617,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -2288,8 +2296,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -2860,6 +2872,8 @@
 					       kvm.nx_huge_pages=off [X86]
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
+					       mmio_stale_data=off [X86]
+					       retbleed=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -2881,6 +2895,8 @@
 				Equivalent to: l1tf=flush,nosmt [X86]
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
+					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -2890,6 +2906,40 @@
 			log everything. Information is printed at KERN_DEBUG
 			so loglevel=8 may also need to be specified.
 
+	mmio_stale_data=
+			[X86,INTEL] Control mitigation for the Processor
+			MMIO Stale Data vulnerabilities.
+
+			Processor MMIO Stale Data is a class of
+			vulnerabilities that may expose data after an MMIO
+			operation. Exposed data could originate or end in
+			the same CPU buffers as affected by MDS and TAA.
+			Therefore, similar to MDS and TAA, the mitigation
+			is to clear the affected CPU buffers.
+
+			This parameter controls the mitigation. The
+			options are:
+
+			full       - Enable mitigation on vulnerable CPUs
+
+			full,nosmt - Enable mitigation and disable SMT on
+				     vulnerable CPUs.
+
+			off        - Unconditionally disable mitigation
+
+			On MDS or TAA affected machines,
+			mmio_stale_data=off can be prevented by an active
+			MDS or TAA mitigation as these vulnerabilities are
+			mitigated with the same mechanism so in order to
+			disable this mitigation, you need to specify
+			mds=off and tsx_async_abort=off too.
+
+			Not specifying this option is equivalent to
+			mmio_stale_data=full.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.
@@ -4023,6 +4073,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	ras=option[,option,...]	[KNL] RAS-specific options
 
 		cec_disable	[X86]
@@ -4602,6 +4658,43 @@
 
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
+	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
+			Speculative Code Execution with Return Instructions)
+			vulnerability.
+
+			AMD-based UNRET and IBPB mitigations alone do not stop
+			sibling threads from influencing the predictions of other
+			sibling threads. For that reason, STIBP is used on pro-
+			cessors that support it, and mitigate SMT on processors
+			that don't.
+
+			off          - no mitigation
+			auto         - automatically select a migitation
+			auto,nosmt   - automatically select a mitigation,
+				       disabling SMT if necessary for
+				       the full mitigation (only on Zen1
+				       and older without STIBP).
+			ibpb         - On AMD, mitigate short speculation
+				       windows on basic block boundaries too.
+				       Safe, highest perf impact. It also
+				       enables STIBP if present. Not suitable
+				       on Intel.
+			ibpb,nosmt   - Like "ibpb" above but will disable SMT
+				       when STIBP is not available. This is
+				       the alternative for systems which do not
+				       have STIBP.
+			unret        - Force enable untrained return thunks,
+				       only effective on AMD f15h-f17h based
+				       systems.
+			unret,nosmt  - Like unret, but will disable SMT when STIBP
+				       is not available. This is the alternative for
+				       systems which do not have STIBP.
+
+			Selecting 'auto' will choose a mitigation method at run
+			time according to the CPU.
+
+			Not specifying this option is equivalent to retbleed=auto.
+
 	rfkill.default_state=
 		0	"airplane mode".  All wifi, bluetooth, wimax, gps, fm,
 			etc. communication is blocked by default.
@@ -4945,8 +5038,13 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - enhanced IBRS
+			eibrs,retpoline   - enhanced IBRS + Retpolines
+			eibrs,lfence      - enhanced IBRS + LFENCE
+			ibrs		  - use IBRS to protect kernel
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -5663,6 +5761,7 @@
 					device);
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
+				k = NO_SAME (do not use WRITE_SAME, uas only)
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
@@ -5964,6 +6063,10 @@
 			This option is obsoleted by the "nopv" option, which
 			has equivalent effect for XEN platform.
 
+	xen_no_vector_callback
+			[KNL,X86,XEN] Disable the vector callback for Xen
+			event channel interrupts.
+
 	xen_scrub_pages=	[XEN]
 			Boolean option to control scrubbing pages before giving them back
 			to Xen, for use by other domains. Can be also changed at runtime
@@ -5977,6 +6080,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
index 5c4432c96c4b..245739f55ac7 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -160,8 +160,8 @@ Under each memory block, you can see 5 files:
 
                     "online_movable", "online", "offline" command
                     which will be performed on all sections in the block.
-``phys_device``     read-only: designed to show the name of physical memory
-                    device.  This is not well implemented now.
+``phys_device``	    read-only: legacy interface only ever used on s390x to
+		    expose the covered storage increment.
 ``removable``       read-only: contains an integer value indicating
                     whether the memory block is removable or not
                     removable.  A value of 1 indicates that the memory
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/perf/arm-cmn.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
index 0e4809346014..796e25b7027b 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
@@ -17,7 +17,7 @@ PMU events
 ----------
 
 The PMU driver registers a single PMU device for the whole interconnect,
-see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link
+see /sys/bus/event_source/devices/arm_cmn_0. Multi-chip systems may link
 more than one CMN together via external CCIX links - in this situation,
 each mesh counts its own events entirely independently, and additional
 PMU devices will be named arm_cmn_{1..n}.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/pm/cpuidle.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/pm/cpuidle.rst
index 10fde58d0869..3596e3714ec1 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/pm/cpuidle.rst
@@ -685,8 +685,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
 by default this way, for example.
 
 The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
 
 The *x86* architecture support code recognizes three kernel command line
 options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
@@ -708,10 +708,13 @@ idle, so it very well may hurt single-thread computations performance as well as
 energy-efficiency.  Thus using it for performance reasons may not be a good idea
 at all.]
 
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
 
 In addition to the architecture-level kernel command line options affecting CPU
 idle time management, there are parameters affecting individual ``CPUIdle``
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/sysctl/kernel.rst
index d4b32cc32bb7..a4b1ebc2e70b 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/sysctl/kernel.rst
@@ -787,6 +787,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1005,28 +1006,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space
@@ -1457,11 +1452,22 @@ unprivileged_bpf_disabled
 =========================
 
 Writing 1 to this entry will disable unprivileged calls to ``bpf()``;
-once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return
-``-EPERM``.
+once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` or ``CAP_BPF``
+will return ``-EPERM``. Once set to 1, this can't be cleared from the
+running kernel anymore.
 
-Once set, this can't be cleared.
+Writing 2 to this entry will also disable unprivileged calls to ``bpf()``,
+however, an admin can still change this setting later on, if needed, by
+writing 0 or 1 to this entry.
 
+If ``BPF_UNPRIV_DEFAULT_OFF`` is enabled in the kernel config, then this
+entry will default to 2 instead of 0.
+
+= =============================================================
+0 Unprivileged calls to ``bpf()`` are enabled
+1 Unprivileged calls to ``bpf()`` are disabled without recovery
+2 Unprivileged calls to ``bpf()`` are disabled
+= =============================================================
 
 watchdog
 ========
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/net.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/sysctl/net.rst
index f2ab8a5b6a4b..7f553859dba8 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/sysctl/net.rst
@@ -271,7 +271,7 @@ poll cycle or the number of packets processed reaches netdev_budget.
 netdev_max_backlog
 ------------------
 
-Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
+Maximum number of packets, queued on the INPUT side, when the interface
 receives packets faster than kernel can process them.
 
 netdev_rss_key
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.10.150-gnu1/Documentation/admin-guide/sysctl/vm.rst
index f455fa00c00f..06027c6a233a 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.10.150-gnu1/Documentation/admin-guide/sysctl/vm.rst
@@ -978,11 +978,11 @@ that benefit from having their data cached, zone_reclaim_mode should be
 left disabled as the caching effect is likely to be more important than
 data locality.
 
-zone_reclaim may be enabled if it's known that the workload is partitioned
-such that each partition fits within a NUMA node and that accessing remote
-memory would cause a measurable performance reduction.  The page allocator
-will then reclaim easily reusable pages (those page cache pages that are
-currently not used) before allocating off node pages.
+Consider enabling one or more zone_reclaim mode bits if it's known that the
+workload is partitioned such that each partition fits within a NUMA node
+and that accessing remote memory would cause a measurable performance
+reduction.  The page allocator will take additional actions before
+allocating off node pages.
 
 Allowing zone reclaim to write out pages stops processes that are
 writing large amounts of data from dirtying pages on other nodes. Zone
diff --git linux-libre-5.10-gnu1/Documentation/arm/memory.rst linux-libre-5.10.150-gnu1/Documentation/arm/memory.rst
index 0521b4ce5c96..34bb23c44a71 100644
--- linux-libre-5.10-gnu1/Documentation/arm/memory.rst
+++ linux-libre-5.10.150-gnu1/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000	fffeffff	DTCM mapping area for platforms with
 fffe0000	fffe7fff	ITCM mapping area for platforms with
 				ITCM mounted inside the CPU.
 
-ffc00000	ffefffff	Fixmap mapping region.  Addresses provided
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
 
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
 fee00000	feffffff	Mapping of PCI I/O space. This is a static
 				mapping within the vmalloc space.
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.10.150-gnu1/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..749ae970c319 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.10.150-gnu1/Documentation/arm64/cpu-feature-registers.rst
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,23 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/elf_hwcaps.rst linux-libre-5.10.150-gnu1/Documentation/arm64/elf_hwcaps.rst
index bbd9cf54db6c..e88d245d426d 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.10.150-gnu1/Documentation/arm64/elf_hwcaps.rst
@@ -245,6 +245,18 @@ HWCAP2_MTE
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/silicon-errata.rst linux-libre-5.10.150-gnu1/Documentation/arm64/silicon-errata.rst
index 719510247292..22a07c208fee 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.10.150-gnu1/Documentation/arm64/silicon-errata.rst
@@ -92,6 +92,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
@@ -160,6 +162,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-5.10-gnu1/Documentation/arm64/tagged-address-abi.rst linux-libre-5.10.150-gnu1/Documentation/arm64/tagged-address-abi.rst
index 4a9d9c794ee5..7d255249094d 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/tagged-address-abi.rst
+++ linux-libre-5.10.150-gnu1/Documentation/arm64/tagged-address-abi.rst
@@ -45,14 +45,24 @@ how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
-
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to
diff --git linux-libre-5.10-gnu1/Documentation/asm-annotations.rst linux-libre-5.10.150-gnu1/Documentation/asm-annotations.rst
index 32ea57483378..76424e0431f4 100644
--- linux-libre-5.10-gnu1/Documentation/asm-annotations.rst
+++ linux-libre-5.10.150-gnu1/Documentation/asm-annotations.rst
@@ -100,6 +100,11 @@ Instruction Macros
 ~~~~~~~~~~~~~~~~~~
 This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
 
+``objtool`` requires that all code must be contained in an ELF symbol. Symbol
+names that have a ``.L`` prefix do not emit symbol table entries. ``.L``
+prefixed symbols can be used within a code region, but should be avoided for
+denoting a range of code via ``SYM_*_START/END`` annotations.
+
 * ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
   most frequent markings**. They are used for functions with standard calling
   conventions -- global and local. Like in C, they both align the functions to
diff --git linux-libre-5.10-gnu1/Documentation/atomic_bitops.txt linux-libre-5.10.150-gnu1/Documentation/atomic_bitops.txt
index 093cdaefdb37..d8b101c97031 100644
--- linux-libre-5.10-gnu1/Documentation/atomic_bitops.txt
+++ linux-libre-5.10.150-gnu1/Documentation/atomic_bitops.txt
@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 
diff --git linux-libre-5.10-gnu1/Documentation/conf.py linux-libre-5.10.150-gnu1/Documentation/conf.py
index ed2b43ec7754..f47c3f1682db 100644
--- linux-libre-5.10-gnu1/Documentation/conf.py
+++ linux-libre-5.10.150-gnu1/Documentation/conf.py
@@ -176,7 +176,7 @@ finally:
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
index c97d4a580f47..42ec1d5fed38 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -123,8 +123,8 @@ properties:
           - const: qcom,msm8974
 
       - items:
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
index 767e86354c8e..2c6911c775c8 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -54,7 +54,7 @@ properties:
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
       - items:
-          - const: toradex,apalis_t30-eval-v1.1
+          - const: toradex,apalis_t30-v1.1-eval
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30-v1.1
           - const: toradex,apalis_t30
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..005e0edd4609 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,16 +22,32 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
   '#clock-cells':
     const: 1
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 0da42ab8fd3a..8a67bb889f18 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index a8d202c9d004..b8cb1b4dae1f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 0d1db3f9da84..02c21b584741 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -8,6 +8,8 @@ Optional properties:
 	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
+	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
+	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
 
 	HDMI audio properties:
 	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
@@ -54,6 +56,8 @@ Example:
 		compatible = "sil,sii9022";
 		reg = <0x39>;
 		reset-gpios = <&pioA 1 0>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
 
 		#sound-dai-cells = <0>;
 		sil,i2s-data-lanes = < 0 1 2 >;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index f8622bd0f61e..f0e0345da498 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..419c3b2ac5a6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -72,6 +72,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index 372679dbd216..7e250ce136ee 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -61,7 +61,7 @@ if:
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 96c914e048f5..2015f50aed0f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -73,7 +73,7 @@ i2c0: i2c@f8034600 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
index ad2fe660364b..c69cf8d0cb15 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -278,23 +278,35 @@ required:
   - interrupts
   - clocks
   - power-domains
-  - resets
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,vin-r8a7778
-          - renesas,vin-r8a7779
-          - renesas,rcar-gen2-vin
-then:
-  required:
-    - port
-else:
-  required:
-    - renesas,id
-    - ports
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,vin-r8a7778
+                - renesas,vin-r8a7779
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,vin-r8a7778
+              - renesas,vin-r8a7779
+              - renesas,rcar-gen2-vin
+    then:
+      required:
+        - port
+    else:
+      required:
+        - renesas,id
+        - ports
 
 additionalProperties: false
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 44919d48d241..c459f169a904 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -122,7 +122,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index b29050fd7470..6fe2a3d8ee6b 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -44,7 +44,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-mode:
         description:
@@ -174,6 +174,6 @@ examples:
         nand-ecc-mode = "soft";
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
     };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/btusb.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/btusb.txt
index b1ad6ee68e90..c51dd99dc0d3 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/btusb.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/btusb.txt
@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index fdf709817218..9e41dad9ef4d 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -49,7 +49,7 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   phy-connection-type:
@@ -206,6 +206,11 @@ properties:
                 Indicates that full-duplex is used. When absent, half
                 duplex is assumed.
 
+            pause:
+              $ref: /schemas/types.yaml#definitions/flag
+              description:
+                Indicates that pause should be enabled.
+
             asym-pause:
               $ref: /schemas/types.yaml#definitions/flag
               description:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 6dd72faebd89..a054accc20bd 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#definitions/flag
     description:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 244befb6402a..de9dd574a2f9 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -163,6 +163,7 @@ allOf:
             enum:
               - renesas,etheravb-r8a774a1
               - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a774e1
               - renesas,etheravb-r8a7795
               - renesas,etheravb-r8a7796
               - renesas,etheravb-r8a77961
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index c78ab7e2eee7..fa83c69820f8 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index 38dc56a57760..ecec514b3155 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index c2b0a8b6da1e..7cebd9ddfffd 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index efc0198eeb74..5444be7667b6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -24,9 +24,9 @@ allOf:
 select:
   properties:
     compatible:
-      items:
-        - enum:
-            - sifive,fu540-c000-ccache
+      contains:
+        enum:
+          - sifive,fu540-c000-ccache
 
   required:
     - compatible
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
index 8acd2de3de3a..d30dc045aac6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -63,6 +63,11 @@ properties:
     description:
       Enables wake up of host system on alarm.
 
+  reset-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RTC is able to reset the machine.
+
 additionalProperties: true
 
 ...
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
index c1d4c196f005..460cb546c54a 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
@@ -93,11 +93,6 @@ properties:
               - mediatek,mt7622-btif
               - mediatek,mt7623-btif
           - const: mediatek,mtk-btif
-      - items:
-          - enum:
-              - mediatek,mt7622-btif
-              - mediatek,mt7623-btif
-          - const: mediatek,mtk-btif
       - items:
           - const: mrvl,mmp-uart
           - const: intel,xscale-uart
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 06d5f251ec88..51f390e5c276 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -77,7 +77,8 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+additionalProperties:
+  type: object
 
 examples:
   - |
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index db61f0731a20..2e35aeaa8781 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -57,7 +57,7 @@ patternProperties:
           rate
 
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandle of the CPU DAI
 
     patternProperties:
@@ -71,7 +71,7 @@ patternProperties:
 
         properties:
           sound-dai:
-            $ref: /schemas/types.yaml#/definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle-array
             description: phandle of the codec DAI
 
         required:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index ef5698f426b2..392204a08e96 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -45,6 +45,7 @@ properties:
     maxItems: 2
 
   interconnect-names:
+    minItems: 1
     items:
       - const: qspi-config
       - const: qspi-memory
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 164f71598c59..1b3954aa71c1 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..93cd77a6e92c 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-5.10.150-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420 and Exynos7).
 
 required:
   - compatible
@@ -58,6 +58,7 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
     then:
       required:
         - samsung,syscon-phandle
diff --git linux-libre-5.10-gnu1/Documentation/dontdiff linux-libre-5.10.150-gnu1/Documentation/dontdiff
index 2554abdc831a..7f99843386ce 100644
--- linux-libre-5.10-gnu1/Documentation/dontdiff
+++ linux-libre-5.10.150-gnu1/Documentation/dontdiff
@@ -178,6 +178,7 @@ mktables
 mktree
 mkutf8data
 modpost
+modules-only.symvers
 modules.builtin
 modules.builtin.modinfo
 modules.nsdeps
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.10.150-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.10.150-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst linux-libre-5.10.150-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
index 8a58c61932ff..61bdeac1bae5 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
+++ linux-libre-5.10.150-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
@@ -69,17 +69,17 @@ early userspace image can be built by an unprivileged user.
 
 As a technical note, when directories and files are specified, the
 entire CONFIG_INITRAMFS_SOURCE is passed to
-usr/gen_initramfs_list.sh.  This means that CONFIG_INITRAMFS_SOURCE
+usr/gen_initramfs.sh.  This means that CONFIG_INITRAMFS_SOURCE
 can really be interpreted as any legal argument to
-gen_initramfs_list.sh.  If a directory is specified as an argument then
+gen_initramfs.sh.  If a directory is specified as an argument then
 the contents are scanned, uid/gid translation is performed, and
 usr/gen_init_cpio file directives are output.  If a directory is
-specified as an argument to usr/gen_initramfs_list.sh then the
+specified as an argument to usr/gen_initramfs.sh then the
 contents of the file are simply copied to the output.  All of the output
 directives from directory scanning and file contents copying are
 processed by usr/gen_init_cpio.
 
-See also 'usr/gen_initramfs_list.sh -h'.
+See also 'usr/gen_initramfs.sh -h'.
 
 Where's this all leading?
 =========================
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/firewire.rst linux-libre-5.10.150-gnu1/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/firewire.rst
+++ linux-libre-5.10.150-gnu1/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/vfio.rst linux-libre-5.10.150-gnu1/Documentation/driver-api/vfio.rst
index f1a4d3c3ba0b..d3a02300913a 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/vfio.rst
+++ linux-libre-5.10.150-gnu1/Documentation/driver-api/vfio.rst
@@ -249,18 +249,23 @@ VFIO bus driver API
 
 VFIO bus drivers, such as vfio-pci make use of only a few interfaces
 into VFIO core.  When devices are bound and unbound to the driver,
-the driver should call vfio_add_group_dev() and vfio_del_group_dev()
-respectively::
-
-	extern int vfio_add_group_dev(struct device *dev,
-				      const struct vfio_device_ops *ops,
-				      void *device_data);
-
-	extern void *vfio_del_group_dev(struct device *dev);
-
-vfio_add_group_dev() indicates to the core to begin tracking the
-iommu_group of the specified dev and register the dev as owned by
-a VFIO bus driver.  The driver provides an ops structure for callbacks
+the driver should call vfio_register_group_dev() and
+vfio_unregister_group_dev() respectively::
+
+	void vfio_init_group_dev(struct vfio_device *device,
+				struct device *dev,
+				const struct vfio_device_ops *ops,
+				void *device_data);
+	int vfio_register_group_dev(struct vfio_device *device);
+	void vfio_unregister_group_dev(struct vfio_device *device);
+
+The driver should embed the vfio_device in its own structure and call
+vfio_init_group_dev() to pre-configure it before going to registration.
+vfio_register_group_dev() indicates to the core to begin tracking the
+iommu_group of the specified dev and register the dev as owned by a VFIO bus
+driver. Once vfio_register_group_dev() returns it is possible for userspace to
+start accessing the driver, thus the driver should ensure it is completely
+ready before calling it. The driver provides an ops structure for callbacks
 similar to a file operations structure::
 
 	struct vfio_device_ops {
@@ -276,7 +281,7 @@ similar to a file operations structure::
 	};
 
 Each function is passed the device_data that was originally registered
-in the vfio_add_group_dev() call above.  This allows the bus driver
+in the vfio_register_group_dev() call above.  This allows the bus driver
 an easy place to store its opaque, private data.  The open/release
 callbacks are issued when a new file descriptor is created for a
 device (via VFIO_GROUP_GET_DEVICE_FD).  The ioctl interface provides
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/xilinx/eemi.rst linux-libre-5.10.150-gnu1/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..c1bc47b9000d 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/xilinx/eemi.rst
+++ linux-libre-5.10.150-gnu1/Documentation/driver-api/xilinx/eemi.rst
@@ -16,35 +16,8 @@ components running across different processing clusters on a chip or
 device to communicate with a power management controller (PMC) on a
 device to issue or respond to power management requests.
 
-EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
-The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
-structure. Any driver who want to communicate with PMC using EEMI APIs
-can call zynqmp_pm_get_eemi_ops().
-
-Example of EEMI ops::
-
-	/* zynqmp-firmware driver maintain all EEMI APIs */
-	struct zynqmp_eemi_ops {
-		int (*get_api_version)(u32 *version);
-		int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
-	};
-
-	static const struct zynqmp_eemi_ops eemi_ops = {
-		.get_api_version = zynqmp_pm_get_api_version,
-		.query_data = zynqmp_pm_query_data,
-	};
-
-Example of EEMI ops usage::
-
-	static const struct zynqmp_eemi_ops *eemi_ops;
-	u32 ret_payload[PAYLOAD_ARG_CNT];
-	int ret;
-
-	eemi_ops = zynqmp_pm_get_eemi_ops();
-	if (IS_ERR(eemi_ops))
-		return PTR_ERR(eemi_ops);
-
-	ret = eemi_ops->query_data(qdata, ret_payload);
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
 
 IOCTL
 ------
diff --git linux-libre-5.10-gnu1/Documentation/fault-injection/provoke-crashes.rst linux-libre-5.10.150-gnu1/Documentation/fault-injection/provoke-crashes.rst
index a20ba5d93932..18de17354206 100644
--- linux-libre-5.10-gnu1/Documentation/fault-injection/provoke-crashes.rst
+++ linux-libre-5.10.150-gnu1/Documentation/fault-injection/provoke-crashes.rst
@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ,
 	IDE_CORE_CP, or DIRECT
 
 cpoint_type
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/ext4/attributes.rst linux-libre-5.10.150-gnu1/Documentation/filesystems/ext4/attributes.rst
index 54386a010a8d..871d2da7a0a9 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/ext4/attributes.rst
+++ linux-libre-5.10.150-gnu1/Documentation/filesystems/ext4/attributes.rst
@@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/f2fs.rst linux-libre-5.10.150-gnu1/Documentation/filesystems/f2fs.rst
index b8ee761c9922..8c0fbdd8ce6f 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/f2fs.rst
+++ linux-libre-5.10.150-gnu1/Documentation/filesystems/f2fs.rst
@@ -688,10 +688,10 @@ users.
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_NOT_SET
-                      HOT_NODE                 "
-                      WARM_NODE                "
-                      COLD_NODE                "
+N/A                   META                     WRITE_LIFE_NOT_SET
+N/A                   HOT_NODE                 "
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                "
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
@@ -717,10 +717,10 @@ WRITE_LIFE_LONG       "                        WRITE_LIFE_LONG
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_MEDIUM;
-                      HOT_NODE                 WRITE_LIFE_NOT_SET
-                      WARM_NODE                "
-                      COLD_NODE                WRITE_LIFE_NONE
+N/A                   META                     WRITE_LIFE_MEDIUM;
+N/A                   HOT_NODE                 WRITE_LIFE_NOT_SET
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                WRITE_LIFE_NONE
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/fscrypt.rst linux-libre-5.10.150-gnu1/Documentation/filesystems/fscrypt.rst
index 44b67ebd6e40..936fae06db77 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/fscrypt.rst
+++ linux-libre-5.10.150-gnu1/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
 
 Each encrypted directory tree is protected by a *master key*.  Master
 keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used.  For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits).  Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used.  For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes.  A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
 
 To "unlock" an encrypted directory tree, userspace must provide the
 appropriate master key.  There can be any number of master keys, each
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/overlayfs.rst linux-libre-5.10.150-gnu1/Documentation/filesystems/overlayfs.rst
index 580ab9a0fe31..137afeb3f581 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/overlayfs.rst
+++ linux-libre-5.10.150-gnu1/Documentation/filesystems/overlayfs.rst
@@ -575,6 +575,14 @@ without significant effort.
 The advantage of mounting with the "volatile" option is that all forms of
 sync calls to the upper filesystem are omitted.
 
+In order to avoid a giving a false sense of safety, the syncfs (and fsync)
+semantics of volatile mounts are slightly different than that of the rest of
+VFS.  If any writeback error occurs on the upperdir's filesystem after a
+volatile mount takes place, all sync functions will return an error.  Once this
+condition is reached, the filesystem will not recover, and every subsequent sync
+call will return an error, even if the upperdir has not experience a new error
+since the last sync call.
+
 When overlay is mounted with "volatile" option, the directory
 "$workdir/work/incompat/volatile" is created.  During next mount, overlay
 checks for this directory and refuses to mount if present. This is a strong
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst linux-libre-5.10.150-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
index 4598b0d90b60..164960631925 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
+++ linux-libre-5.10.150-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
@@ -170,7 +170,7 @@ Documentation/driver-api/early-userspace/early_userspace_support.rst for more de
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
 creates a configuration file from that directory (usr/Makefile calls
-usr/gen_initramfs_list.sh), and proceeds to package up that directory
+usr/gen_initramfs.sh), and proceeds to package up that directory
 using the config file (by feeding it to usr/gen_init_cpio, which is created
 from usr/gen_init_cpio.c).  The kernel's build-time cpio creation code is
 entirely self-contained, and the kernel's boot-time extractor is also
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/seq_file.rst linux-libre-5.10.150-gnu1/Documentation/filesystems/seq_file.rst
index 56856481dc8d..a6726082a7c2 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/seq_file.rst
+++ linux-libre-5.10.150-gnu1/Documentation/filesystems/seq_file.rst
@@ -217,6 +217,12 @@ between the calls to start() and stop(), so holding a lock during that time
 is a reasonable thing to do. The seq_file code will also avoid taking any
 other locks while the iterator is active.
 
+The iterater value returned by start() or next() is guaranteed to be
+passed to a subsequent next() or stop() call.  This allows resources
+such as locks that were taken to be reliably released.  There is *no*
+guarantee that the iterator will be passed to show(), though in practice
+it often will be.
+
 
 Formatted output
 ================
diff --git linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst linux-libre-5.10.150-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
index e588bccf5158..344284236a81 100644
--- linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
+++ linux-libre-5.10.150-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -168,7 +168,7 @@ An error injection example::
   0x00000008	Memory Correctable
   0x00000010	Memory Uncorrectable non-fatal
   # echo 0x12345000 > param1		# Set memory address for injection
-  # echo $((-1 << 12)) > param2		# Mask 0xfffffffffffff000 - anywhere in this page
+  # echo 0xfffffffffffff000 > param2		# Mask - anywhere in this page
   # echo 0x8 > error_type			# Choose correctable memory error
   # echo 1 > error_inject			# Inject now
 
diff --git linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.10.150-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 9b17dc77d18c..da0e46496fc4 100644
--- linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.10.150-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.10-gnu1/Documentation/gpu/todo.rst linux-libre-5.10.150-gnu1/Documentation/gpu/todo.rst
index b0ea17da8ff6..28841609aa4f 100644
--- linux-libre-5.10-gnu1/Documentation/gpu/todo.rst
+++ linux-libre-5.10.150-gnu1/Documentation/gpu/todo.rst
@@ -542,6 +542,27 @@ Some of these date from the very introduction of KMS in 2008 ...
 
 Level: Intermediate
 
+Remove automatic page mapping from dma-buf importing
+----------------------------------------------------
+
+When importing dma-bufs, the dma-buf and PRIME frameworks automatically map
+imported pages into the importer's DMA area. drm_gem_prime_fd_to_handle() and
+drm_gem_prime_handle_to_fd() require that importers call dma_buf_attach()
+even if they never do actual device DMA, but only CPU access through
+dma_buf_vmap(). This is a problem for USB devices, which do not support DMA
+operations.
+
+To fix the issue, automatic page mappings should be removed from the
+buffer-sharing code. Fixing this is a bit more involved, since the import/export
+cache is also tied to &drm_gem_object.import_attach. Meanwhile we paper over
+this problem for USB devices by fishing out the USB host controller device, as
+long as that supports DMA. Otherwise importing can still needlessly fail.
+
+Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter
+
+Level: Advanced
+
+
 Better Testing
 ==============
 
diff --git linux-libre-5.10-gnu1/Documentation/hwmon/lm90.rst linux-libre-5.10.150-gnu1/Documentation/hwmon/lm90.rst
index 3da8c6e06a36..05391fb4042d 100644
--- linux-libre-5.10-gnu1/Documentation/hwmon/lm90.rst
+++ linux-libre-5.10.150-gnu1/Documentation/hwmon/lm90.rst
@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
diff --git linux-libre-5.10-gnu1/Documentation/hwmon/max31790.rst linux-libre-5.10.150-gnu1/Documentation/hwmon/max31790.rst
index f301385d8cef..7b097c3b9b90 100644
--- linux-libre-5.10-gnu1/Documentation/hwmon/max31790.rst
+++ linux-libre-5.10.150-gnu1/Documentation/hwmon/max31790.rst
@@ -38,6 +38,7 @@ Sysfs entries
 fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
-pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
-pwm[1-6]           RW  fan target duty cycle (0-255)
+pwm[1-6]_enable    RW  regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  read: current pwm duty cycle,
+                       write: target pwm duty cycle (0-255)
 ================== === =======================================================
diff --git linux-libre-5.10-gnu1/Documentation/input/joydev/joystick.rst linux-libre-5.10.150-gnu1/Documentation/input/joydev/joystick.rst
index 9746fd76cc58..f38c330c028e 100644
--- linux-libre-5.10-gnu1/Documentation/input/joydev/joystick.rst
+++ linux-libre-5.10.150-gnu1/Documentation/input/joydev/joystick.rst
@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
 * AVB Mag Turbo Force
 * AVB Top Shot Pegasus
 * AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
 * Logitech WingMan Force
 * Logitech WingMan Force Wheel
 * Guillemot Race Leader Force Feedback
diff --git linux-libre-5.10-gnu1/Documentation/kbuild/gcc-plugins.rst linux-libre-5.10.150-gnu1/Documentation/kbuild/gcc-plugins.rst
index 4b1c10f88e30..3349966f213d 100644
--- linux-libre-5.10-gnu1/Documentation/kbuild/gcc-plugins.rst
+++ linux-libre-5.10.150-gnu1/Documentation/kbuild/gcc-plugins.rst
@@ -11,16 +11,13 @@ compiler [1]_. They are useful for runtime instrumentation and static analysis.
 We can analyse, change and add further code during compilation via
 callbacks [2]_, GIMPLE [3]_, IPA [4]_ and RTL passes [5]_.
 
-The GCC plugin infrastructure of the kernel supports all gcc versions from
-4.5 to 6.0, building out-of-tree modules, cross-compilation and building in a
-separate directory.
-Plugin source files have to be compilable by both a C and a C++ compiler as well
-because gcc versions 4.5 and 4.6 are compiled by a C compiler,
-gcc-4.7 can be compiled by a C or a C++ compiler,
-and versions 4.8+ can only be compiled by a C++ compiler.
+The GCC plugin infrastructure of the kernel supports building out-of-tree
+modules, cross-compilation and building in a separate directory.
+Plugin source files have to be compilable by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
-powerpc architectures.
+Currently the GCC plugin infrastructure supports only some architectures.
+Grep "select HAVE_GCC_PLUGINS" to find out which architectures support
+GCC plugins.
 
 This infrastructure was ported from grsecurity [6]_ and PaX [7]_.
 
@@ -47,20 +44,13 @@ Files
 	This is a compatibility header for GCC plugins.
 	It should be always included instead of individual gcc headers.
 
-**$(src)/scripts/gcc-plugin.sh**
-
-	This script checks the availability of the included headers in
-	gcc-common.h and chooses the proper host compiler to build the plugins
-	(gcc-4.7 can be built by either gcc or g++).
-
 **$(src)/scripts/gcc-plugins/gcc-generate-gimple-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-ipa-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-simple_ipa-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-rtl-pass.h**
 
 	These headers automatically generate the registration structures for
-	GIMPLE, SIMPLE_IPA, IPA and RTL passes. They support all gcc versions
-	from 4.5 to 6.0.
+	GIMPLE, SIMPLE_IPA, IPA and RTL passes.
 	They should be preferred to creating the structures by hand.
 
 
@@ -68,21 +58,25 @@ Usage
 =====
 
 You must install the gcc plugin headers for your gcc version,
-e.g., on Ubuntu for gcc-4.9::
+e.g., on Ubuntu for gcc-10::
 
-	apt-get install gcc-4.9-plugin-dev
+	apt-get install gcc-10-plugin-dev
 
 Or on Fedora::
 
 	dnf install gcc-plugin-devel
 
-Enable a GCC plugin based feature in the kernel config::
+Enable the GCC plugin infrastructure and some plugin(s) you want to use
+in the kernel config::
 
-	CONFIG_GCC_PLUGIN_CYC_COMPLEXITY = y
+	CONFIG_GCC_PLUGINS=y
+	CONFIG_GCC_PLUGIN_CYC_COMPLEXITY=y
+	CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
+	...
 
-To compile only the plugin(s)::
+To compile the minimum tool set including the plugin(s)::
 
-	make gcc-plugins
+	make scripts
 
 or just run the kernel make and compile the whole kernel with
 the cyclomatic complexity GCC plugin.
@@ -91,7 +85,8 @@ the cyclomatic complexity GCC plugin.
 4. How to add a new GCC plugin
 ==============================
 
-The GCC plugins are in $(src)/scripts/gcc-plugins/. You can use a file or a directory
-here. It must be added to $(src)/scripts/gcc-plugins/Makefile,
-$(src)/scripts/Makefile.gcc-plugins and $(src)/arch/Kconfig.
+The GCC plugins are in scripts/gcc-plugins/. You need to put plugin source files
+right under scripts/gcc-plugins/. Creating subdirectories is not supported.
+It must be added to scripts/gcc-plugins/Makefile, scripts/Makefile.gcc-plugins
+and a relevant Kconfig file.
 See the cyc_complexity_plugin.c (CONFIG_GCC_PLUGIN_CYC_COMPLEXITY) GCC plugin.
diff --git linux-libre-5.10-gnu1/Documentation/locking/locktypes.rst linux-libre-5.10.150-gnu1/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- linux-libre-5.10-gnu1/Documentation/locking/locktypes.rst
+++ linux-libre-5.10.150-gnu1/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git linux-libre-5.10-gnu1/Documentation/locking/seqlock.rst linux-libre-5.10.150-gnu1/Documentation/locking/seqlock.rst
index a334b584f2b3..64405e5da63e 100644
--- linux-libre-5.10-gnu1/Documentation/locking/seqlock.rst
+++ linux-libre-5.10.150-gnu1/Documentation/locking/seqlock.rst
@@ -89,7 +89,7 @@ Read path::
 
 .. _seqcount_locktype_t:
 
-Sequence counters with associated locks (``seqcount_LOCKTYPE_t``)
+Sequence counters with associated locks (``seqcount_LOCKNAME_t``)
 -----------------------------------------------------------------
 
 As discussed at :ref:`seqcount_t`, sequence count write side critical
@@ -115,27 +115,26 @@ The following sequence counters with associated locks are defined:
   - ``seqcount_mutex_t``
   - ``seqcount_ww_mutex_t``
 
-The plain seqcount read and write APIs branch out to the specific
-seqcount_LOCKTYPE_t implementation at compile-time. This avoids kernel
-API explosion per each new seqcount LOCKTYPE.
+The sequence counter read and write APIs can take either a plain
+seqcount_t or any of the seqcount_LOCKNAME_t variants above.
 
-Initialization (replace "LOCKTYPE" with one of the supported locks)::
+Initialization (replace "LOCKNAME" with one of the supported locks)::
 
 	/* dynamic */
-	seqcount_LOCKTYPE_t foo_seqcount;
-	seqcount_LOCKTYPE_init(&foo_seqcount, &lock);
+	seqcount_LOCKNAME_t foo_seqcount;
+	seqcount_LOCKNAME_init(&foo_seqcount, &lock);
 
 	/* static */
-	static seqcount_LOCKTYPE_t foo_seqcount =
-		SEQCNT_LOCKTYPE_ZERO(foo_seqcount, &lock);
+	static seqcount_LOCKNAME_t foo_seqcount =
+		SEQCNT_LOCKNAME_ZERO(foo_seqcount, &lock);
 
 	/* C99 struct init */
 	struct {
-		.seq   = SEQCNT_LOCKTYPE_ZERO(foo.seq, &lock),
+		.seq   = SEQCNT_LOCKNAME_ZERO(foo.seq, &lock),
 	} foo;
 
 Write path: same as in :ref:`seqcount_t`, while running from a context
-with the associated LOCKTYPE lock acquired.
+with the associated write serialization lock acquired.
 
 Read path: same as in :ref:`seqcount_t`.
 
diff --git linux-libre-5.10-gnu1/Documentation/networking/bonding.rst linux-libre-5.10.150-gnu1/Documentation/networking/bonding.rst
index adc314639085..413dca513e1d 100644
--- linux-libre-5.10-gnu1/Documentation/networking/bonding.rst
+++ linux-libre-5.10.150-gnu1/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-5.10-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst linux-libre-5.10.150-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- linux-libre-5.10-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ linux-libre-5.10.150-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git linux-libre-5.10-gnu1/Documentation/networking/ip-sysctl.rst linux-libre-5.10.150-gnu1/Documentation/networking/ip-sysctl.rst
index 25e6673a085a..0158dff63887 100644
--- linux-libre-5.10-gnu1/Documentation/networking/ip-sysctl.rst
+++ linux-libre-5.10.150-gnu1/Documentation/networking/ip-sysctl.rst
@@ -630,16 +630,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 
 	default: initial size of receive buffer used by TCP sockets.
 	This value overrides net.core.rmem_default used by other protocols.
-	Default: 87380 bytes. This value results in window of 65535 with
-	default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
-	less for default tcp_app_win. See below about these variables.
+	Default: 131072 bytes.
+	This value results in initial window of 65535.
 
 	max: maximal size of receive buffer allowed for automatically
 	selected receiver buffers for TCP socket. This value does not override
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 6MB, depending on RAM size.
+	Default: between 131072 and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
@@ -752,7 +751,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.
 
-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).
 
 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The
@@ -989,7 +988,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -1081,7 +1080,7 @@ ip_autobind_reuse - BOOLEAN
 	option should only be set by experts.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
@@ -2630,7 +2629,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
diff --git linux-libre-5.10-gnu1/Documentation/networking/ipvs-sysctl.rst linux-libre-5.10.150-gnu1/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..1cfbf1add2fc 100644
--- linux-libre-5.10-gnu1/Documentation/networking/ipvs-sysctl.rst
+++ linux-libre-5.10.150-gnu1/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.10-gnu1/Documentation/networking/netdev-FAQ.rst linux-libre-5.10.150-gnu1/Documentation/networking/netdev-FAQ.rst
index 4b9ed5874d5a..be88ab15e53c 100644
--- linux-libre-5.10-gnu1/Documentation/networking/netdev-FAQ.rst
+++ linux-libre-5.10.150-gnu1/Documentation/networking/netdev-FAQ.rst
@@ -144,77 +144,13 @@ Please send incremental versions on top of what has been merged in order to fix
 the patches the way they would look like if your latest patch series was to be
 merged.
 
-Q: How can I tell what patches are queued up for backporting to the various stable releases?
---------------------------------------------------------------------------------------------
-A: Normally Greg Kroah-Hartman collects stable commits himself, but for
-networking, Dave collects up patches he deems critical for the
-networking subsystem, and then hands them off to Greg.
-
-There is a patchworks queue that you can see here:
-
-  https://patchwork.kernel.org/bundle/netdev/stable/?state=*
-
-It contains the patches which Dave has selected, but not yet handed off
-to Greg.  If Greg already has the patch, then it will be here:
-
-  https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
-
-A quick way to find whether the patch is in this stable-queue is to
-simply clone the repo, and then git grep the mainline commit ID, e.g.
-::
-
-  stable-queue$ git grep -l 284041ef21fdf2e
-  releases/3.0.84/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  releases/3.4.51/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  releases/3.9.8/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  stable/stable-queue$
-
-Q: I see a network patch and I think it should be backported to stable.
------------------------------------------------------------------------
-Q: Should I request it via stable@vger.kernel.org like the references in
-the kernel's Documentation/process/stable-kernel-rules.rst file say?
-A: No, not for networking.  Check the stable queues as per above first
-to see if it is already queued.  If not, then send a mail to netdev,
-listing the upstream commit ID and why you think it should be a stable
-candidate.
-
-Before you jump to go do the above, do note that the normal stable rules
-in :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
-still apply.  So you need to explicitly indicate why it is a critical
-fix and exactly what users are impacted.  In addition, you need to
-convince yourself that you *really* think it has been overlooked,
-vs. having been considered and rejected.
-
-Generally speaking, the longer it has had a chance to "soak" in
-mainline, the better the odds that it is an OK candidate for stable.  So
-scrambling to request a commit be added the day after it appears should
-be avoided.
-
-Q: I have created a network patch and I think it should be backported to stable.
---------------------------------------------------------------------------------
-Q: Should I add a Cc: stable@vger.kernel.org like the references in the
-kernel's Documentation/ directory say?
-A: No.  See above answer.  In short, if you think it really belongs in
-stable, then ensure you write a decent commit log that describes who
-gets impacted by the bug fix and how it manifests itself, and when the
-bug was introduced.  If you do that properly, then the commit will get
-handled appropriately and most likely get put in the patchworks stable
-queue if it really warrants it.
-
-If you think there is some valid information relating to it being in
-stable that does *not* belong in the commit log, then use the three dash
-marker line as described in
-:ref:`Documentation/process/submitting-patches.rst <the_canonical_patch_format>`
-to temporarily embed that information into the patch that you send.
-
-Q: Are all networking bug fixes backported to all stable releases?
-------------------------------------------------------------------
-A: Due to capacity, Dave could only take care of the backports for the
-last two stable releases. For earlier stable releases, each stable
-branch maintainer is supposed to take care of them. If you find any
-patch is missing from an earlier stable branch, please notify
-stable@vger.kernel.org with either a commit ID or a formal patch
-backported, and CC Dave and other relevant networking developers.
+Q: Are there special rules regarding stable submissions on netdev?
+---------------------------------------------------------------
+While it used to be the case that netdev submissions were not supposed
+to carry explicit ``CC: stable@vger.kernel.org`` tags that is no longer
+the case today. Please follow the standard stable rules in
+:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`,
+and make sure you include appropriate Fixes tags!
 
 Q: Is the comment style convention different for the networking content?
 ------------------------------------------------------------------------
diff --git linux-libre-5.10-gnu1/Documentation/networking/netdevices.rst linux-libre-5.10.150-gnu1/Documentation/networking/netdevices.rst
index 5a85fcc80c76..557b97483437 100644
--- linux-libre-5.10-gnu1/Documentation/networking/netdevices.rst
+++ linux-libre-5.10.150-gnu1/Documentation/networking/netdevices.rst
@@ -10,18 +10,177 @@ Introduction
 The following is a random collection of documentation regarding
 network devices.
 
-struct net_device allocation rules
-==================================
+struct net_device lifetime rules
+================================
 Network device structures need to persist even after module is unloaded and
 must be allocated with alloc_netdev_mqs() and friends.
 If device has registered successfully, it will be freed on last use
-by free_netdev(). This is required to handle the pathologic case cleanly
-(example: rmmod mydriver </sys/class/net/myeth/mtu )
+by free_netdev(). This is required to handle the pathological case cleanly
+(example: ``rmmod mydriver </sys/class/net/myeth/mtu``)
 
-alloc_netdev_mqs()/alloc_netdev() reserve extra space for driver
+alloc_netdev_mqs() / alloc_netdev() reserve extra space for driver
 private data which gets freed when the network device is freed. If
 separately allocated data is attached to the network device
-(netdev_priv(dev)) then it is up to the module exit handler to free that.
+(netdev_priv()) then it is up to the module exit handler to free that.
+
+There are two groups of APIs for registering struct net_device.
+First group can be used in normal contexts where ``rtnl_lock`` is not already
+held: register_netdev(), unregister_netdev().
+Second group can be used when ``rtnl_lock`` is already held:
+register_netdevice(), unregister_netdevice(), free_netdevice().
+
+Simple drivers
+--------------
+
+Most drivers (especially device drivers) handle lifetime of struct net_device
+in context where ``rtnl_lock`` is not held (e.g. driver probe and remove paths).
+
+In that case the struct net_device registration is done using
+the register_netdev(), and unregister_netdev() functions:
+
+.. code-block:: c
+
+  int probe()
+  {
+    struct my_device_priv *priv;
+    int err;
+
+    dev = alloc_netdev_mqs(...);
+    if (!dev)
+      return -ENOMEM;
+    priv = netdev_priv(dev);
+
+    /* ... do all device setup before calling register_netdev() ...
+     */
+
+    err = register_netdev(dev);
+    if (err)
+      goto err_undo;
+
+    /* net_device is visible to the user! */
+
+  err_undo:
+    /* ... undo the device setup ... */
+    free_netdev(dev);
+    return err;
+  }
+
+  void remove()
+  {
+    unregister_netdev(dev);
+    free_netdev(dev);
+  }
+
+Note that after calling register_netdev() the device is visible in the system.
+Users can open it and start sending / receiving traffic immediately,
+or run any other callback, so all initialization must be done prior to
+registration.
+
+unregister_netdev() closes the device and waits for all users to be done
+with it. The memory of struct net_device itself may still be referenced
+by sysfs but all operations on that device will fail.
+
+free_netdev() can be called after unregister_netdev() returns on when
+register_netdev() failed.
+
+Device management under RTNL
+----------------------------
+
+Registering struct net_device while in context which already holds
+the ``rtnl_lock`` requires extra care. In those scenarios most drivers
+will want to make use of struct net_device's ``needs_free_netdev``
+and ``priv_destructor`` members for freeing of state.
+
+Example flow of netdev handling under ``rtnl_lock``:
+
+.. code-block:: c
+
+  static void my_setup(struct net_device *dev)
+  {
+    dev->needs_free_netdev = true;
+  }
+
+  static void my_destructor(struct net_device *dev)
+  {
+    some_obj_destroy(priv->obj);
+    some_uninit(priv);
+  }
+
+  int create_link()
+  {
+    struct my_device_priv *priv;
+    int err;
+
+    ASSERT_RTNL();
+
+    dev = alloc_netdev(sizeof(*priv), "net%d", NET_NAME_UNKNOWN, my_setup);
+    if (!dev)
+      return -ENOMEM;
+    priv = netdev_priv(dev);
+
+    /* Implicit constructor */
+    err = some_init(priv);
+    if (err)
+      goto err_free_dev;
+
+    priv->obj = some_obj_create();
+    if (!priv->obj) {
+      err = -ENOMEM;
+      goto err_some_uninit;
+    }
+    /* End of constructor, set the destructor: */
+    dev->priv_destructor = my_destructor;
+
+    err = register_netdevice(dev);
+    if (err)
+      /* register_netdevice() calls destructor on failure */
+      goto err_free_dev;
+
+    /* If anything fails now unregister_netdevice() (or unregister_netdev())
+     * will take care of calling my_destructor and free_netdev().
+     */
+
+    return 0;
+
+  err_some_uninit:
+    some_uninit(priv);
+  err_free_dev:
+    free_netdev(dev);
+    return err;
+  }
+
+If struct net_device.priv_destructor is set it will be called by the core
+some time after unregister_netdevice(), it will also be called if
+register_netdevice() fails. The callback may be invoked with or without
+``rtnl_lock`` held.
+
+There is no explicit constructor callback, driver "constructs" the private
+netdev state after allocating it and before registration.
+
+Setting struct net_device.needs_free_netdev makes core call free_netdevice()
+automatically after unregister_netdevice() when all references to the device
+are gone. It only takes effect after a successful call to register_netdevice()
+so if register_netdevice() fails driver is responsible for calling
+free_netdev().
+
+free_netdev() is safe to call on error paths right after unregister_netdevice()
+or when register_netdevice() fails. Parts of netdev (de)registration process
+happen after ``rtnl_lock`` is released, therefore in those cases free_netdev()
+will defer some of the processing until ``rtnl_lock`` is released.
+
+Devices spawned from struct rtnl_link_ops should never free the
+struct net_device directly.
+
+.ndo_init and .ndo_uninit
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``.ndo_init`` and ``.ndo_uninit`` callbacks are called during net_device
+registration and de-registration, under ``rtnl_lock``. Drivers can use
+those e.g. when parts of their init process need to run under ``rtnl_lock``.
+
+``.ndo_init`` runs before device is visible in the system, ``.ndo_uninit``
+runs during de-registering after device is closed but other subsystems
+may still have outstanding references to the netdevice.
 
 MTU
 ===
diff --git linux-libre-5.10-gnu1/Documentation/powerpc/syscall64-abi.rst linux-libre-5.10.150-gnu1/Documentation/powerpc/syscall64-abi.rst
index cf9b2857c72a..d8242049bdcb 100644
--- linux-libre-5.10-gnu1/Documentation/powerpc/syscall64-abi.rst
+++ linux-libre-5.10.150-gnu1/Documentation/powerpc/syscall64-abi.rst
@@ -96,6 +96,16 @@ auxiliary vector.
 
 scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
 
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
 vsyscall
 ========
 
diff --git linux-libre-5.10-gnu1/Documentation/process/code-of-conduct-interpretation.rst linux-libre-5.10.150-gnu1/Documentation/process/code-of-conduct-interpretation.rst
index e899f14a4ba2..4f8a06b00f60 100644
--- linux-libre-5.10-gnu1/Documentation/process/code-of-conduct-interpretation.rst
+++ linux-libre-5.10.150-gnu1/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the
diff --git linux-libre-5.10-gnu1/Documentation/process/stable-kernel-rules.rst linux-libre-5.10.150-gnu1/Documentation/process/stable-kernel-rules.rst
index 3973556250e1..fbcb48bc2a90 100644
--- linux-libre-5.10-gnu1/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.10.150-gnu1/Documentation/process/stable-kernel-rules.rst
@@ -35,12 +35,6 @@ Rules on what kind of patches are accepted, and which ones are not, into the
 Procedure for submitting patches to the -stable tree
 ----------------------------------------------------
 
- - If the patch covers files in net/ or drivers/net please follow netdev stable
-   submission guidelines as described in
-   :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
-   after first checking the stable networking queue at
-   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
-   to ensure the requested patch is not already queued up.
  - Security patches should not be handled (solely) by the -stable review
    process but should follow the procedures in
    :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.
@@ -174,7 +168,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee
diff --git linux-libre-5.10-gnu1/Documentation/process/submitting-patches.rst linux-libre-5.10.150-gnu1/Documentation/process/submitting-patches.rst
index 83d9a82055a7..edd263e0992d 100644
--- linux-libre-5.10-gnu1/Documentation/process/submitting-patches.rst
+++ linux-libre-5.10.150-gnu1/Documentation/process/submitting-patches.rst
@@ -71,7 +71,7 @@ as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
@@ -250,11 +250,6 @@ should also read
 :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
 in addition to this file.
 
-Note, however, that some subsystem maintainers want to come to their own
-conclusions on which patches should go to the stable trees.  The networking
-maintainer, in particular, would rather not see individual developers
-adding lines like the above to their patches.
-
 If changes affect userland-kernel interfaces, please send the MAN-PAGES
 maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
 least a notification of the change, so that some information makes its way
diff --git linux-libre-5.10-gnu1/Documentation/scsi/libsas.rst linux-libre-5.10.150-gnu1/Documentation/scsi/libsas.rst
index 7216b5d25800..ea63ab3a9216 100644
--- linux-libre-5.10-gnu1/Documentation/scsi/libsas.rst
+++ linux-libre-5.10.150-gnu1/Documentation/scsi/libsas.rst
@@ -189,13 +189,10 @@ num_phys
 The event interface::
 
 	/* LLDD calls these to notify the class of an event. */
-	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
-	void (*notify_port_event)(struct sas_phy *, enum port_event);
-	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
-
-When sas_register_ha() returns, those are set and can be
-called by the LLDD to notify the SAS layer of such events
-the SAS layer.
+	void sas_notify_port_event(struct sas_phy *, enum port_event);
+	void sas_notify_phy_event(struct sas_phy *, enum phy_event);
+	void sas_notify_port_event_gfp(struct sas_phy *, enum port_event, gfp_t);
+	void sas_notify_phy_event_gfp(struct sas_phy *, enum phy_event, gfp_t);
 
 The port notification::
 
diff --git linux-libre-5.10-gnu1/Documentation/security/keys/core.rst linux-libre-5.10.150-gnu1/Documentation/security/keys/core.rst
index aa0081685ee1..b3ed5c581034 100644
--- linux-libre-5.10-gnu1/Documentation/security/keys/core.rst
+++ linux-libre-5.10.150-gnu1/Documentation/security/keys/core.rst
@@ -1040,8 +1040,8 @@ The keyctl syscall functions are:
 
      "key" is the ID of the key to be watched.
 
-     "queue_fd" is a file descriptor referring to an open "/dev/watch_queue"
-     which manages the buffer into which notifications will be delivered.
+     "queue_fd" is a file descriptor referring to an open pipe which
+     manages the buffer into which notifications will be delivered.
 
      "filter" is either NULL to remove a watch or a filter specification to
      indicate what events are required from the key.
diff --git linux-libre-5.10-gnu1/Documentation/sound/alsa-configuration.rst linux-libre-5.10.150-gnu1/Documentation/sound/alsa-configuration.rst
index d66da6cb867c..3aa511e42e10 100644
--- linux-libre-5.10-gnu1/Documentation/sound/alsa-configuration.rst
+++ linux-libre-5.10.150-gnu1/Documentation/sound/alsa-configuration.rst
@@ -1501,7 +1501,7 @@ Module for Digigram miXart8 sound cards.
 
 This module supports multiple cards.
 Note: One miXart8 board will be represented as 4 alsa cards.
-See MIXART.txt for details.
+See Documentation/sound/cards/mixart.rst for details.
 
 When the driver is compiled as a module and the hotplug firmware
 is supported, the firmware data is loaded via hotplug automatically.
diff --git linux-libre-5.10-gnu1/Documentation/sound/hd-audio/models.rst linux-libre-5.10.150-gnu1/Documentation/sound/hd-audio/models.rst
index 0ea967d34583..9b52f50a6854 100644
--- linux-libre-5.10-gnu1/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.10.150-gnu1/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
@@ -326,6 +330,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======
diff --git linux-libre-5.10-gnu1/Documentation/sphinx/parse-headers.pl linux-libre-5.10.150-gnu1/Documentation/sphinx/parse-headers.pl
index 1910079f984f..b063f2f1cfb2 100755
--- linux-libre-5.10-gnu1/Documentation/sphinx/parse-headers.pl
+++ linux-libre-5.10.150-gnu1/Documentation/sphinx/parse-headers.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 use strict;
 use Text::Tabs;
 use Getopt::Long;
diff --git linux-libre-5.10-gnu1/Documentation/target/tcm_mod_builder.py linux-libre-5.10.150-gnu1/Documentation/target/tcm_mod_builder.py
index 1548d8420499..54492aa813b9 100755
--- linux-libre-5.10-gnu1/Documentation/target/tcm_mod_builder.py
+++ linux-libre-5.10.150-gnu1/Documentation/target/tcm_mod_builder.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # The TCM v4 multi-protocol fabric module generation script for drivers/target/$NEW_MOD
 #
 # Copyright (c) 2010 Rising Tide Systems
diff --git linux-libre-5.10-gnu1/Documentation/trace/events.rst linux-libre-5.10.150-gnu1/Documentation/trace/events.rst
index 2a5aa48eff6c..9df29a935757 100644
--- linux-libre-5.10-gnu1/Documentation/trace/events.rst
+++ linux-libre-5.10.150-gnu1/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/trace/histogram.rst linux-libre-5.10.150-gnu1/Documentation/trace/histogram.rst
index b71e09f745c3..f99be8062bc8 100644
--- linux-libre-5.10-gnu1/Documentation/trace/histogram.rst
+++ linux-libre-5.10.150-gnu1/Documentation/trace/histogram.rst
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/decode_msr.py linux-libre-5.10.150-gnu1/Documentation/trace/postprocess/decode_msr.py
index 0ab40e0db580..aa9cc7abd5c2 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/decode_msr.py
+++ linux-libre-5.10.150-gnu1/Documentation/trace/postprocess/decode_msr.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # add symbolic names to read_msr / write_msr in trace
 # decode_msr msr-index.h < trace
 import sys
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl linux-libre-5.10.150-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
index 0a120aae33ce..b9b7d80c2f9d 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
+++ linux-libre-5.10.150-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC (proof of concept or piece of crap, take your pick) for reading the
 # text representation of trace output related to page allocation. It makes an attempt
 # to extract some high-level information on what is going on. The accuracy of the parser
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl linux-libre-5.10.150-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index 995da15b16ca..2f4e39875fb3 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ linux-libre-5.10.150-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC for reading the text representation of trace output related to
 # page reclaim. It makes an attempt to extract some high-level information on
 # what is going on. The accuracy of the parser may vary
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst linux-libre-5.10.150-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index ce728c757eaf..b864869b42bc 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ linux-libre-5.10.150-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -4030,7 +4030,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
       - 0x00000001
       -
     * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
@@ -4238,6 +4238,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
       - 0x00000100
       -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000200
+      -
 
 .. c:type:: v4l2_hevc_dpb_entry
 
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst linux-libre-5.10.150-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
index c9b7bb3ca089..eff6727c69d3 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ linux-libre-5.10.150-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -1567,8 +1567,8 @@ The following tables list existing packed RGB formats.
       - MEDIA_BUS_FMT_RGB101010_1X30
       - 0x1018
       -
-      - 0
-      - 0
+      -
+      -
       - r\ :sub:`9`
       - r\ :sub:`8`
       - r\ :sub:`7`
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/seccomp_filter.rst linux-libre-5.10.150-gnu1/Documentation/userspace-api/seccomp_filter.rst
index bd9165241b6c..6efb41cc8072 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/seccomp_filter.rst
+++ linux-libre-5.10.150-gnu1/Documentation/userspace-api/seccomp_filter.rst
@@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)``  (or ``poll()``) on a
 seccomp notification fd to receive a ``struct seccomp_notif``, which contains
 five members: the input length of the structure, a unique-per-filter ``id``,
 the ``pid`` of the task which triggered this request (which may be 0 if the
-task is in a pid ns not visible from the listener's pid namespace), a ``flags``
-member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
-whether or not the notification is a result of a non-fatal signal, and the
-``data`` passed to seccomp. Userspace can then make a decision based on this
-information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
-response, indicating what should be returned to userspace. The ``id`` member of
-``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
-seccomp_notif``.
+task is in a pid ns not visible from the listener's pid namespace). The
+notification also contains the ``data`` passed to seccomp, and a filters flag.
+The structure should be zeroed out prior to calling the ioctl.
+
+Userspace can then make a decision based on this information about what to do,
+and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be
+returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should
+be the same ``id`` as in ``struct seccomp_notif``.
 
 It is worth noting that ``struct seccomp_data`` contains the values of register
 arguments to the syscall, but does not contain pointers to memory. The task's
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/api.rst linux-libre-5.10.150-gnu1/Documentation/virt/kvm/api.rst
index e00a66d72372..cd8a58556804 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/api.rst
+++ linux-libre-5.10.150-gnu1/Documentation/virt/kvm/api.rst
@@ -182,6 +182,9 @@ is dependent on the CPU capability and the kernel configuration. The limit can
 be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION
 ioctl() at run-time.
 
+Creation of the VM will fail if the requested IPA size (whether it is
+implicit or explicit) is unsupported on the host.
+
 Please note that configuring the IPA size does not affect the capability
 exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects
 size of the address translated by the stage2 level (guest physical to
@@ -1264,6 +1267,9 @@ field userspace_addr, which must point at user addressable memory for
 the entire memory slot size.  Any object may back this memory, including
 anonymous memory, ordinary files, and hugetlbfs.
 
+On architectures that support a form of address tagging, userspace_addr must
+be an untagged address.
+
 It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
 be identical.  This allows large pages in the guest to be backed by large
 pages in the host.
@@ -1316,7 +1322,7 @@ documentation when it pops into existence).
 
 :Capability: KVM_CAP_ENABLE_CAP_VM
 :Architectures: all
-:Type: vcpu ioctl
+:Type: vm ioctl
 :Parameters: struct kvm_enable_cap (in)
 :Returns: 0 on success; -1 on error
 
@@ -4804,8 +4810,10 @@ If an MSR access is not permitted through the filtering, it generates a
 allows user space to deflect and potentially handle various MSR accesses
 into user space.
 
-If a vCPU is in running state while this ioctl is invoked, the vCPU may
-experience inconsistent filtering behavior on MSR accesses.
+Note, invoking this ioctl with a vCPU is running is inherently racy.  However,
+KVM does guarantee that vCPUs will see either the previous filter or the new
+filter, e.g. MSRs with identical settings in both the old and new filter will
+have deterministic behavior.
 
 
 5. The kvm_run structure
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/mmu.rst linux-libre-5.10.150-gnu1/Documentation/virt/kvm/mmu.rst
index 5bfe28b0728e..20d85daed395 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/mmu.rst
+++ linux-libre-5.10.150-gnu1/Documentation/virt/kvm/mmu.rst
@@ -171,8 +171,8 @@ Shadow pages contain the following information:
     shadow pages) so role.quadrant takes values in the range 0..3.  Each
     quadrant maps 1GB virtual address space.
   role.access:
-    Inherited guest access permissions in the form uwx.  Note execute
-    permission is positive, not negative.
+    Inherited guest access permissions from the parent ptes in the form uwx.
+    Note execute permission is positive, not negative.
   role.invalid:
     The page is invalid and should not be used.  It is a root page that is
     currently pinned (by a cpu hardware register pointing to it); once it is
diff --git linux-libre-5.10-gnu1/Documentation/vm/arch_pgtable_helpers.rst linux-libre-5.10.150-gnu1/Documentation/vm/arch_pgtable_helpers.rst
index f3591ee3aaa8..552567d863b8 100644
--- linux-libre-5.10-gnu1/Documentation/vm/arch_pgtable_helpers.rst
+++ linux-libre-5.10.150-gnu1/Documentation/vm/arch_pgtable_helpers.rst
@@ -50,7 +50,7 @@ PTE Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pte_mkwrite               | Creates a writable PTE                           |
 +---------------------------+--------------------------------------------------+
-| pte_mkwrprotect           | Creates a write protected PTE                    |
+| pte_wrprotect             | Creates a write protected PTE                    |
 +---------------------------+--------------------------------------------------+
 | pte_mkspecial             | Creates a special PTE                            |
 +---------------------------+--------------------------------------------------+
@@ -120,7 +120,7 @@ PMD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pmd_mkwrite               | Creates a writable PMD                           |
 +---------------------------+--------------------------------------------------+
-| pmd_mkwrprotect           | Creates a write protected PMD                    |
+| pmd_wrprotect             | Creates a write protected PMD                    |
 +---------------------------+--------------------------------------------------+
 | pmd_mkspecial             | Creates a special PMD                            |
 +---------------------------+--------------------------------------------------+
@@ -186,7 +186,7 @@ PUD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pud_mkwrite               | Creates a writable PUD                           |
 +---------------------------+--------------------------------------------------+
-| pud_mkwrprotect           | Creates a write protected PUD                    |
+| pud_wrprotect             | Creates a write protected PUD                    |
 +---------------------------+--------------------------------------------------+
 | pud_mkdevmap              | Creates a ZONE_DEVICE mapped PUD                 |
 +---------------------------+--------------------------------------------------+
@@ -224,7 +224,7 @@ HugeTLB Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | huge_pte_mkwrite          | Creates a writable HugeTLB                       |
 +---------------------------+--------------------------------------------------+
-| huge_pte_mkwrprotect      | Creates a write protected HugeTLB                |
+| huge_pte_wrprotect        | Creates a write protected HugeTLB                |
 +---------------------------+--------------------------------------------------+
 | huge_ptep_get_and_clear   | Clears a HugeTLB                                 |
 +---------------------------+--------------------------------------------------+
diff --git linux-libre-5.10-gnu1/Documentation/vm/memory-model.rst linux-libre-5.10.150-gnu1/Documentation/vm/memory-model.rst
index 9daadf9faba1..ce398a7dc6cd 100644
--- linux-libre-5.10-gnu1/Documentation/vm/memory-model.rst
+++ linux-libre-5.10.150-gnu1/Documentation/vm/memory-model.rst
@@ -51,8 +51,7 @@ call :c:func:`free_area_init` function. Yet, the mappings array is not
 usable until the call to :c:func:`memblock_free_all` that hands all the
 memory to the page allocator.
 
-If an architecture enables `CONFIG_ARCH_HAS_HOLES_MEMORYMODEL` option,
-it may free parts of the `mem_map` array that do not cover the
+An architecture may free parts of the `mem_map` array that do not cover the
 actual physical pages. In such case, the architecture specific
 :c:func:`pfn_valid` implementation should take the holes in the
 `mem_map` into account.
diff --git linux-libre-5.10-gnu1/Documentation/vm/slub.rst linux-libre-5.10.150-gnu1/Documentation/vm/slub.rst
index 03f294a638bd..d3028554b1e9 100644
--- linux-libre-5.10-gnu1/Documentation/vm/slub.rst
+++ linux-libre-5.10.150-gnu1/Documentation/vm/slub.rst
@@ -181,7 +181,7 @@ SLUB Debug output
 Here is a sample of slub debug output::
 
  ====================================================================
- BUG kmalloc-8: Redzone overwritten
+ BUG kmalloc-8: Right Redzone overwritten
  --------------------------------------------------------------------
 
  INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
@@ -189,10 +189,10 @@ Here is a sample of slub debug output::
  INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
  INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
 
- Bytes b4 0xc90f6d10:  00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
-   Object 0xc90f6d20:  31 30 31 39 2e 30 30 35                         1019.005
-  Redzone 0xc90f6d28:  00 cc cc cc                                     .
-  Padding 0xc90f6d50:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
+ Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object   (0xc90f6d20): 31 30 31 39 2e 30 30 35                         1019.005
+ Redzone  (0xc90f6d28): 00 cc cc cc                                     .
+ Padding  (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
 
    [<c010523d>] dump_trace+0x63/0x1eb
    [<c01053df>] show_trace_log_lvl+0x1a/0x2f
diff --git linux-libre-5.10-gnu1/Documentation/x86/topology.rst linux-libre-5.10.150-gnu1/Documentation/x86/topology.rst
index e29739904e37..7f58010ea86a 100644
--- linux-libre-5.10-gnu1/Documentation/x86/topology.rst
+++ linux-libre-5.10.150-gnu1/Documentation/x86/topology.rst
@@ -41,6 +41,8 @@ Package
 Packages contain a number of cores plus shared resources, e.g. DRAM
 controller, shared caches etc.
 
+Modern systems may also use the term 'Die' for package.
+
 AMD nomenclature for package is 'Node'.
 
 Package-related topology information in the kernel:
@@ -53,11 +55,18 @@ Package-related topology information in the kernel:
 
     The number of dies in a package. This information is retrieved via CPUID.
 
+  - cpuinfo_x86.cpu_die_id:
+
+    The physical ID of the die. This information is retrieved via CPUID.
+
   - cpuinfo_x86.phys_proc_id:
 
     The physical ID of the package. This information is retrieved via CPUID
     and deduced from the APIC IDs of the cores in the package.
 
+    Modern systems use this value for the socket. There may be multiple
+    packages within a socket. This value may differ from cpu_die_id.
+
   - cpuinfo_x86.logical_proc_id:
 
     The logical ID of the package. As we do not trust BIOSes to enumerate the
diff --git linux-libre-5.10-gnu1/MAINTAINERS linux-libre-5.10.150-gnu1/MAINTAINERS
index 281de213ef47..4d10e79030a9 100644
--- linux-libre-5.10-gnu1/MAINTAINERS
+++ linux-libre-5.10.150-gnu1/MAINTAINERS
@@ -1155,7 +1155,7 @@ M:	Joel Fernandes <joel@joelfernandes.org>
 M:	Christian Brauner <christian@brauner.io>
 M:	Hridya Valsaraju <hridya@google.com>
 M:	Suren Baghdasaryan <surenb@google.com>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/android/
@@ -6694,6 +6694,7 @@ F:	Documentation/filesystems/f2fs.rst
 F:	fs/f2fs/
 F:	include/linux/f2fs_fs.h
 F:	include/trace/events/f2fs.h
+F:	include/uapi/linux/f2fs.h
 
 F71805F HARDWARE MONITORING DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
@@ -7309,7 +7310,6 @@ L:	linux-hardening@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/gcc-plugins.rst
 F:	scripts/Makefile.gcc-plugins
-F:	scripts/gcc-plugin.sh
 F:	scripts/gcc-plugins/
 
 GCOV BASED KERNEL PROFILING
@@ -8001,7 +8001,6 @@ F:	drivers/crypto/hisilicon/sec2/sec_main.c
 
 HISILICON STAGING DRIVERS FOR HIKEY 960/970
 M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/hikey9xx/
 
@@ -14672,6 +14671,8 @@ F:	arch/mips/generic/board-ranchu.c
 
 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/crng/random.git
 S:	Maintained
 F:	drivers/char/random.c
 
@@ -16665,7 +16666,7 @@ F:	drivers/staging/vt665?/
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	devel@driverdev.osuosl.org
+L:	linux-staging@lists.linux.dev
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/staging/
@@ -18705,7 +18706,7 @@ VME SUBSYSTEM
 M:	Martyn Welch <martyn@welchs.me.uk>
 M:	Manohar Vanga <manohar.vanga@gmail.com>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/driver-api/vme.rst
@@ -19245,7 +19246,8 @@ F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
-M:	Darrick J. Wong <darrick.wong@oracle.com>
+M:	Amir Goldstein <amir73il@gmail.com>
+M:	Darrick J. Wong <djwong@kernel.org>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
 S:	Supported
diff --git linux-libre-5.10-gnu1/Makefile linux-libre-5.10.150-gnu1/Makefile
index 9d5bb08d565e..82be4891e52d 100644
--- linux-libre-5.10-gnu1/Makefile
+++ linux-libre-5.10.150-gnu1/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 0
+SUBLEVEL = 150
 EXTRAVERSION = -gnu1
-NAME = Kleptomaniac Octopus
+NAME = Dare mighty things
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -265,7 +265,8 @@ no-dot-config-targets := $(clean-targets) \
 			 $(version_h) headers headers_% archheaders archscripts \
 			 %asm-generic kernelversion %src-pkg dt_binding_check \
 			 outputmakefile
-no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease
+no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \
+			  image_name
 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
 
 config-build	:=
@@ -450,7 +451,7 @@ LEX		= flex
 YACC		= bison
 AWK		= awk
 INSTALLKERNEL  := installkernel
-DEPMOD		= /sbin/depmod
+DEPMOD		= depmod
 PERL		= perl
 PYTHON		= python
 PYTHON3		= python3
@@ -669,12 +670,21 @@ ifdef CONFIG_FUNCTION_TRACER
   CC_FLAGS_FTRACE := -pg
 endif
 
-RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
-RETPOLINE_VDSO_CFLAGS_GCC := -mindirect-branch=thunk-inline -mindirect-branch-register
-RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
-RETPOLINE_VDSO_CFLAGS_CLANG := -mretpoline
-RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
-RETPOLINE_VDSO_CFLAGS := $(call cc-option,$(RETPOLINE_VDSO_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_VDSO_CFLAGS_CLANG)))
+ifdef CONFIG_CC_IS_GCC
+RETPOLINE_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
+RETPOLINE_CFLAGS	+= $(call cc-option,-mindirect-branch-cs-prefix)
+RETPOLINE_VDSO_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-inline -mindirect-branch-register)
+endif
+ifdef CONFIG_CC_IS_CLANG
+RETPOLINE_CFLAGS	:= -mretpoline-external-thunk
+RETPOLINE_VDSO_CFLAGS	:= -mretpoline
+endif
+
+ifdef CONFIG_RETHUNK
+RETHUNK_CFLAGS         := -mfunction-return=thunk-extern
+RETPOLINE_CFLAGS       += $(RETHUNK_CFLAGS)
+endif
+
 export RETPOLINE_CFLAGS
 export RETPOLINE_VDSO_CFLAGS
 
@@ -703,11 +713,12 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
-quiet_cmd_syncconfig = SYNC    $@
-      cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig
-
+#
+# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
+# so you cannot notice that Kconfig is waiting for the user input.
 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
-	+$(call cmd,syncconfig)
+	$(Q)$(kecho) "  SYNC    $@"
+	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 else # !may-sync-config
 # External modules and some install targets need include/generated/autoconf.h
 # and include/config/auto.conf but do not care if they are up-to-date.
@@ -774,16 +785,16 @@ KBUILD_CFLAGS += -Wno-gnu
 KBUILD_CFLAGS += -mno-global-merge
 else
 
-# These warnings generated too much noise in a regular build.
-# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
-KBUILD_CFLAGS += -Wno-unused-but-set-variable
-
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
 endif
 
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
@@ -805,17 +816,19 @@ endif
 
 # Initialize all stack variables with a zero value.
 ifdef CONFIG_INIT_STACK_ALL_ZERO
-# Future support for zero initialization is still being debated, see
-# https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being
-# renamed or dropped.
 KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
+ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+# https://github.com/llvm/llvm-project/issues/44842
 KBUILD_CFLAGS	+= -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 endif
+endif
+
+DEBUG_CFLAGS	:=
 
 # Workaround for GCC versions < 5.0
 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801
 ifdef CONFIG_CC_IS_GCC
-DEBUG_CFLAGS	:= $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments))
+DEBUG_CFLAGS	+= $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments))
 endif
 
 ifdef CONFIG_DEBUG_INFO
@@ -948,12 +961,6 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=designated-init)
 # change __FILE__ to the relative path from the srctree
 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
-# ensure -fcf-protection is disabled when using retpoline as it is
-# incompatible with -mindirect-branch=thunk-extern
-ifdef CONFIG_RETPOLINE
-KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
-endif
-
 # include additional Makefiles when needed
 include-y			:= scripts/Makefile.extrawarn
 include-$(CONFIG_KASAN)		+= scripts/Makefile.kasan
@@ -976,12 +983,15 @@ KBUILD_CFLAGS   += $(KCFLAGS)
 KBUILD_LDFLAGS_MODULE += --build-id=sha1
 LDFLAGS_vmlinux += --build-id=sha1
 
+KBUILD_LDFLAGS	+= -z noexecstack
+KBUILD_LDFLAGS	+= $(call ld-option,--no-warn-rwx-segments)
+
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
 
 ifeq ($(CONFIG_RELR),y)
-LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr
+LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr --use-android-relr-tags
 endif
 
 # We never want expected sections to be placed heuristically by the
@@ -1075,7 +1085,7 @@ export mod_sign_cmd
 HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
 
 has_libelf = $(call try-run,\
-               echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
+               echo "int main() {}" | $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
 
 ifdef CONFIG_STACK_VALIDATION
   ifeq ($(has_libelf),1)
@@ -1086,6 +1096,17 @@ ifdef CONFIG_STACK_VALIDATION
   endif
 endif
 
+PHONY += resolve_btfids_clean
+
+resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
+
+# tools/bpf/resolve_btfids directory might not exist
+# in output directory, skip its clean in that case
+resolve_btfids_clean:
+ifneq ($(wildcard $(resolve_btfids_O)),)
+	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
+endif
+
 ifdef CONFIG_BPF
 ifdef CONFIG_DEBUG_INFO_BTF
   ifeq ($(has_libelf),1)
@@ -1112,13 +1133,11 @@ vmlinux-alldirs	:= $(sort $(vmlinux-dirs) Documentation \
 		     $(patsubst %/,%,$(filter %/, $(core-) \
 			$(drivers-) $(libs-))))
 
-subdir-modorder := $(addsuffix modules.order,$(filter %/, \
-			$(core-y) $(core-m) $(libs-y) $(libs-m) \
-			$(drivers-y) $(drivers-m)))
-
 build-dirs	:= $(vmlinux-dirs)
 clean-dirs	:= $(vmlinux-alldirs)
 
+subdir-modorder := $(addsuffix /modules.order, $(build-dirs))
+
 # Externally visible symbols (used by link-vmlinux.sh)
 KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y))
 KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y)))
@@ -1147,7 +1166,7 @@ KBUILD_MODULES := 1
 
 autoksyms_recursive: descend modules.order
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) -f $(srctree)/Makefile vmlinux"
+	  "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
 endif
 
 autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
@@ -1251,11 +1270,19 @@ define filechk_utsrelease.h
 endef
 
 define filechk_version.h
-	echo \#define LINUX_VERSION_CODE $(shell                         \
-	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
-	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
+	if [ $(SUBLEVEL) -gt 255 ]; then                                 \
+		echo \#define LINUX_VERSION_CODE $(shell                 \
+		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \
+	else                                                             \
+		echo \#define LINUX_VERSION_CODE $(shell                 \
+		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+	fi;                                                              \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) +  \
+	((c) > 255 ? 255 : (c)))'
 endef
 
+$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0)
+$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0)
 $(version_h): FORCE
 	$(call filechk,version.h)
 	$(Q)rm -f $(old_version_h)
@@ -1467,7 +1494,7 @@ endif # CONFIG_MODULES
 # make distclean Remove editor backup files, patch leftover files and the like
 
 # Directories & files removed with 'make clean'
-CLEAN_FILES += include/ksym vmlinux.symvers \
+CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
 	       compile_commands.json
 
@@ -1495,7 +1522,7 @@ vmlinuxclean:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
 	$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
 
-clean: archclean vmlinuxclean
+clean: archclean vmlinuxclean resolve_btfids_clean
 
 # mrproper - Delete all generated files, including .config
 #
diff --git linux-libre-5.10-gnu1/arch/Kconfig linux-libre-5.10.150-gnu1/arch/Kconfig
index ba4e966484ab..632d60e13494 100644
--- linux-libre-5.10-gnu1/arch/Kconfig
+++ linux-libre-5.10.150-gnu1/arch/Kconfig
@@ -143,6 +143,22 @@ config UPROBES
 	    managed by the kernel and kept transparent to the probed
 	    application. )
 
+config HAVE_64BIT_ALIGNED_ACCESS
+	def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  Some architectures require 64 bit accesses to be 64 bit
+	  aligned, which also requires structs containing 64 bit values
+	  to be 64 bit aligned too. This includes some 32 bit
+	  architectures which can do 64 bit accesses, as well as 64 bit
+	  architectures without unaligned access.
+
+	  This symbol should be selected by an architecture if 64 bit
+	  accesses are required to be 64 bit aligned in this way even
+	  though it is not a 64 bit architecture.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
 	help
@@ -1010,6 +1026,9 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
        bool
        help
@@ -1037,6 +1056,12 @@ config ARCH_WANT_LD_ORPHAN_WARN
 	  by the linker, since the locations of such sections can change between linker
 	  versions.
 
+config ARCH_SPLIT_ARG64
+	bool
+	help
+	   If a 32-bit architecture requires 64-bit arguments to be split into
+	   pairs of 32-bit arguments, select this option.
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
diff --git linux-libre-5.10-gnu1/arch/alpha/include/asm/io.h linux-libre-5.10.150-gnu1/arch/alpha/include/asm/io.h
index 1f6a909d1fa5..7bc2f444a89a 100644
--- linux-libre-5.10-gnu1/arch/alpha/include/asm/io.h
+++ linux-libre-5.10.150-gnu1/arch/alpha/include/asm/io.h
@@ -60,7 +60,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -70,7 +70,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -106,7 +106,7 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
diff --git linux-libre-5.10-gnu1/arch/alpha/include/asm/local64.h linux-libre-5.10.150-gnu1/arch/alpha/include/asm/local64.h
deleted file mode 100644
index 36c93b5cc239..000000000000
--- linux-libre-5.10-gnu1/arch/alpha/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git linux-libre-5.10-gnu1/arch/alpha/include/asm/timex.h linux-libre-5.10.150-gnu1/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- linux-libre-5.10-gnu1/arch/alpha/include/asm/timex.h
+++ linux-libre-5.10.150-gnu1/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git linux-libre-5.10-gnu1/arch/alpha/kernel/setup.c linux-libre-5.10.150-gnu1/arch/alpha/kernel/setup.c
index 916e42d74a86..7eea28d6f6c8 100644
--- linux-libre-5.10-gnu1/arch/alpha/kernel/setup.c
+++ linux-libre-5.10.150-gnu1/arch/alpha/kernel/setup.c
@@ -325,18 +325,19 @@ setup_memory(void *kernel_end)
 		       i, cluster->usage, cluster->start_pfn,
 		       cluster->start_pfn + cluster->numpages);
 
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
 		end = cluster->start_pfn + cluster->numpages;
 		if (end > max_low_pfn)
 			max_low_pfn = end;
 
 		memblock_add(PFN_PHYS(cluster->start_pfn),
 			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
 	}
 
 	/*
diff --git linux-libre-5.10-gnu1/arch/alpha/kernel/smp.c linux-libre-5.10.150-gnu1/arch/alpha/kernel/smp.c
index f4dd9f3f3001..cb64e4797d2a 100644
--- linux-libre-5.10-gnu1/arch/alpha/kernel/smp.c
+++ linux-libre-5.10.150-gnu1/arch/alpha/kernel/smp.c
@@ -166,7 +166,6 @@ smp_callin(void)
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
@@ -583,7 +582,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
diff --git linux-libre-5.10-gnu1/arch/alpha/kernel/srmcons.c linux-libre-5.10.150-gnu1/arch/alpha/kernel/srmcons.c
index 438b10c44d73..2b7a314b8452 100644
--- linux-libre-5.10-gnu1/arch/alpha/kernel/srmcons.c
+++ linux-libre-5.10.150-gnu1/arch/alpha/kernel/srmcons.c
@@ -59,7 +59,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
diff --git linux-libre-5.10-gnu1/arch/arc/Makefile linux-libre-5.10.150-gnu1/arch/arc/Makefile
index 0c6bf0d1df7a..578bdbbb0fa7 100644
--- linux-libre-5.10-gnu1/arch/arc/Makefile
+++ linux-libre-5.10.150-gnu1/arch/arc/Makefile
@@ -102,16 +102,22 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-#default target for make without any arguments.
-KBUILD_IMAGE	:= $(boot)/bootpImage
-
-all:	bootpImage
-bootpImage: vmlinux
-
-boot_targets += uImage uImage.bin uImage.gz
+boot_targets := uImage.bin uImage.gz uImage.lzma
 
+PHONY += $(boot_targets)
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
+uimage-default-y			:= uImage.bin
+uimage-default-$(CONFIG_KERNEL_GZIP)	:= uImage.gz
+uimage-default-$(CONFIG_KERNEL_LZMA)	:= uImage.lzma
+
+PHONY += uImage
+uImage: $(uimage-default-y)
+	@ln -sf $< $(boot)/uImage
+	@$(kecho) '  Image $(boot)/uImage is ready'
+
+CLEAN_FILES += $(boot)/uImage
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
diff --git linux-libre-5.10-gnu1/arch/arc/boot/Makefile linux-libre-5.10.150-gnu1/arch/arc/boot/Makefile
index 538b92f4dd25..3b1f8a69a89e 100644
--- linux-libre-5.10-gnu1/arch/arc/boot/Makefile
+++ linux-libre-5.10.150-gnu1/arch/arc/boot/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-targets := vmlinux.bin vmlinux.bin.gz uImage
+targets := vmlinux.bin vmlinux.bin.gz
 
 # uImage build relies on mkimage being availble on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
@@ -13,11 +13,6 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
 UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
 UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
 
-suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
-targets += uImage
 targets += uImage.bin
 targets += uImage.gz
 targets += uImage.lzma
@@ -42,7 +37,3 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
 
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
 	$(call if_changed,uimage,lzma)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix-y)
-	@ln -sf $(notdir $<) $@
-	@echo '  Image $@ is ready'
diff --git linux-libre-5.10-gnu1/arch/arc/include/asm/Kbuild linux-libre-5.10.150-gnu1/arch/arc/include/asm/Kbuild
index 81f4edec0c2a..3c1afa524b9c 100644
--- linux-libre-5.10-gnu1/arch/arc/include/asm/Kbuild
+++ linux-libre-5.10.150-gnu1/arch/arc/include/asm/Kbuild
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 generic-y += extable.h
 generic-y += kvm_para.h
-generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += parport.h
 generic-y += user.h
diff --git linux-libre-5.10-gnu1/arch/arc/include/asm/page.h linux-libre-5.10.150-gnu1/arch/arc/include/asm/page.h
index b0dfed0f12be..9926cd5a17b0 100644
--- linux-libre-5.10-gnu1/arch/arc/include/asm/page.h
+++ linux-libre-5.10.150-gnu1/arch/arc/include/asm/page.h
@@ -7,9 +7,22 @@
 
 #include <uapi/asm/page.h>
 
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
 #ifndef __ASSEMBLY__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
 struct vm_area_struct;
diff --git linux-libre-5.10-gnu1/arch/arc/include/asm/pgtable.h linux-libre-5.10.150-gnu1/arch/arc/include/asm/pgtable.h
index 163641726a2b..5878846f00cf 100644
--- linux-libre-5.10-gnu1/arch/arc/include/asm/pgtable.h
+++ linux-libre-5.10.150-gnu1/arch/arc/include/asm/pgtable.h
@@ -107,8 +107,8 @@
 #define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
 /* More Abbrevaited helpers */
 #define PAGE_U_NONE     __pgprot(___DEF)
 #define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
@@ -132,13 +132,7 @@
 #define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
 #define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
 
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 40
-#else
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 32
-#endif
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/page.h linux-libre-5.10.150-gnu1/arch/arc/include/uapi/asm/page.h
index 2a97e2718a21..2a4ad619abfb 100644
--- linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/page.h
+++ linux-libre-5.10.150-gnu1/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
 
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/sigcontext.h linux-libre-5.10.150-gnu1/arch/arc/include/uapi/asm/sigcontext.h
index 95f8a4380e11..7a5449dfcb29 100644
--- linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/sigcontext.h
+++ linux-libre-5.10.150-gnu1/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
  */
 struct sigcontext {
 	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
 };
 
 #endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/entry.S linux-libre-5.10.150-gnu1/arch/arc/kernel/entry.S
index ea00c8a17f07..301ade4d0b94 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/entry.S
+++ linux-libre-5.10.150-gnu1/arch/arc/kernel/entry.S
@@ -177,7 +177,7 @@ tracesys:
 
 	; Do the Sys Call as we normally would.
 	; Validate the Sys Call number
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
 
@@ -199,6 +199,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
@@ -255,7 +256,7 @@ ENTRY(EV_Trap)
 	;============ Normal syscall case
 
 	; syscall num shd not exceed the total system calls avail
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/fpu.c linux-libre-5.10.150-gnu1/arch/arc/kernel/fpu.c
index c67c0f0f5f77..ec640219d989 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/fpu.c
+++ linux-libre-5.10.150-gnu1/arch/arc/kernel/fpu.c
@@ -57,23 +57,26 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 
 void fpu_init_task(struct pt_regs *regs)
 {
+	const unsigned int fwe = 0x80000000;
+
 	/* default rounding mode */
 	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
 
-	/* set "Write enable" to allow explicit write to exception flags */
-	write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+	/* Initialize to zero: setting requires FWE be set */
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
 }
 
 void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 {
 	struct arc_fpu *save = &prev->thread.fpu;
 	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
 
 	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
 	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
 
 	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
-	write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
 }
 
 #endif
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/process.c linux-libre-5.10.150-gnu1/arch/arc/kernel/process.c
index 37f724ad5e39..a85e9c625ab5 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/process.c
+++ linux-libre-5.10.150-gnu1/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/signal.c linux-libre-5.10.150-gnu1/arch/arc/kernel/signal.c
index 2be55fb96d87..9d5996e014c0 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/signal.c
+++ linux-libre-5.10.150-gnu1/arch/arc/kernel/signal.c
@@ -61,6 +61,41 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
+static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
 static int
 stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
@@ -94,9 +129,13 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 
 	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
@@ -109,8 +148,12 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/smp.c linux-libre-5.10.150-gnu1/arch/arc/kernel/smp.c
index 52906d314537..db0e104d6835 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/smp.c
+++ linux-libre-5.10.150-gnu1/arch/arc/kernel/smp.c
@@ -189,7 +189,6 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	local_irq_enable();
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/vmlinux.lds.S linux-libre-5.10.150-gnu1/arch/arc/kernel/vmlinux.lds.S
index 33ce59d91461..f67e4ad7b3ce 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/vmlinux.lds.S
+++ linux-libre-5.10.150-gnu1/arch/arc/kernel/vmlinux.lds.S
@@ -88,6 +88,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}
diff --git linux-libre-5.10-gnu1/arch/arc/mm/cache.c linux-libre-5.10.150-gnu1/arch/arc/mm/cache.c
index a2fbea3ee07c..102418ac5ff4 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/cache.c
+++ linux-libre-5.10.150-gnu1/arch/arc/mm/cache.c
@@ -1123,7 +1123,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 	clear_page(to);
 	clear_bit(PG_dc_clean, &page->flags);
 }
-
+EXPORT_SYMBOL(clear_user_page);
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
diff --git linux-libre-5.10-gnu1/arch/arc/mm/init.c linux-libre-5.10.150-gnu1/arch/arc/mm/init.c
index 3a35b82a718e..da543fd422fe 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/init.c
+++ linux-libre-5.10.150-gnu1/arch/arc/mm/init.c
@@ -158,7 +158,16 @@ void __init setup_arch_memory(void)
 	min_high_pfn = PFN_DOWN(high_mem_start);
 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-	max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+	/*
+	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+	 * For HIGHMEM without PAE max_high_pfn should be less than
+	 * min_low_pfn to guarantee that these two regions don't overlap.
+	 * For PAE case highmem is greater than lowmem, so it is natural
+	 * to use max_high_pfn.
+	 *
+	 * In both cases, holes should be handled by pfn_valid().
+	 */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
 	kmap_init();
diff --git linux-libre-5.10-gnu1/arch/arc/mm/ioremap.c linux-libre-5.10.150-gnu1/arch/arc/mm/ioremap.c
index fac4adc90204..95c649fbc95a 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/ioremap.c
+++ linux-libre-5.10.150-gnu1/arch/arc/mm/ioremap.c
@@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
 void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 			   unsigned long flags)
 {
+	unsigned int off;
 	unsigned long vaddr;
 	struct vm_struct *area;
-	phys_addr_t off, end;
+	phys_addr_t end;
 	pgprot_t prot = __pgprot(flags);
 
 	/* Don't allow wraparound, zero size */
@@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 
 	/* Mappings have to be page-aligned */
 	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK;
+	paddr &= PAGE_MASK_PHYS;
 	size = PAGE_ALIGN(end + 1) - paddr;
 
 	/*
diff --git linux-libre-5.10-gnu1/arch/arc/mm/tlb.c linux-libre-5.10.150-gnu1/arch/arc/mm/tlb.c
index 9bb3c24f3677..9c7c68247289 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/tlb.c
+++ linux-libre-5.10.150-gnu1/arch/arc/mm/tlb.c
@@ -576,7 +576,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 		      pte_t *ptep)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
-	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
 	struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 	create_tlb(vma, vaddr, ptep);
diff --git linux-libre-5.10-gnu1/arch/arm/Kconfig linux-libre-5.10.150-gnu1/arch/arm/Kconfig
index 002e0cf025f5..985ab0b091a6 100644
--- linux-libre-5.10-gnu1/arch/arm/Kconfig
+++ linux-libre-5.10.150-gnu1/arch/arm/Kconfig
@@ -25,7 +25,7 @@ config ARM
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAS_GCOV_PROFILE_ALL
-	select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC
+	select ARCH_KEEP_MEMBLOCK
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
@@ -87,6 +87,7 @@ config ARM
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IDE if PCI || ISA || PCMCIA
@@ -520,7 +521,6 @@ config ARCH_S3C24XX
 config ARCH_OMAP1
 	bool "TI OMAP1"
 	depends on MMU
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
@@ -1480,9 +1480,6 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say N.
 
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
 config ARCH_SELECT_MEMORY_MODEL
 	bool
 
@@ -1494,7 +1491,7 @@ config ARCH_SPARSEMEM_ENABLE
 	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+	def_bool y
 
 config HIGHMEM
 	bool "High Memory Support"
@@ -1794,7 +1791,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
diff --git linux-libre-5.10-gnu1/arch/arm/Kconfig.debug linux-libre-5.10.150-gnu1/arch/arm/Kconfig.debug
index 8986a91a6f31..dd1cf7035398 100644
--- linux-libre-5.10-gnu1/arch/arm/Kconfig.debug
+++ linux-libre-5.10.150-gnu1/arch/arm/Kconfig.debug
@@ -400,12 +400,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1523,7 +1523,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1591,12 +1591,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git linux-libre-5.10-gnu1/arch/arm/Makefile linux-libre-5.10.150-gnu1/arch/arm/Makefile
index e15f76ca2887..0e5a8765e60b 100644
--- linux-libre-5.10-gnu1/arch/arm/Makefile
+++ linux-libre-5.10.150-gnu1/arch/arm/Makefile
@@ -60,15 +60,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -90,11 +90,11 @@ tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/Makefile linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/Makefile
index e1567418a2b1..175213d7a1aa 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/Makefile
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/Makefile
@@ -84,6 +84,8 @@ compress-$(CONFIG_KERNEL_LZ4)  = lz4
 libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 
@@ -114,8 +116,8 @@ asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/atags_to_fdt.c linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/atags_to_fdt.c
index 8452753efebe..31927d2fe297 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/atags_to_fdt.c
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/atags_to_fdt.c
@@ -15,7 +15,8 @@ static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
 	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
 	return offset;
 }
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/decompress.c linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/decompress.c
index aa075d8372ea..74255e819831 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/decompress.c
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/decompress.c
@@ -47,7 +47,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/efi-header.S linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..230030c13085 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/head.S linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/head.S
index caa27322a0ab..7a38c63b62bf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/head.S
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/compressed/head.S
@@ -116,7 +116,7 @@
 		/*
 		 * Debug print of the final appended DTB location
 		 */
-		.macro dbgadtb, begin, end
+		.macro dbgadtb, begin, size
 #ifdef DEBUG
 		kputc   #'D'
 		kputc   #'T'
@@ -129,7 +129,7 @@
 		kputc	#'('
 		kputc	#'0'
 		kputc	#'x'
-		kphex	\end, 8		/* End of appended DTB */
+		kphex	\size, 8	/* Size of appended DTB */
 		kputc	#')'
 		kputc	#'\n'
 #endif
@@ -190,7 +190,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
@@ -1175,9 +1176,9 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
@@ -1440,8 +1441,7 @@ ENTRY(efi_enter_kernel)
 		mov	r4, r0			@ preserve image base
 		mov	r8, r1			@ preserve DT pointer
 
- ARM(		adrl	r0, call_cache_fn	)
- THUMB(		adr	r0, call_cache_fn	)
+		adr_l	r0, call_cache_fn
 		adr	r1, 0f			@ clean the region of code we
 		bl	cache_clean_flush	@ may run with the MMU off
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/Makefile linux-libre-5.10.150-gnu1/arch/arm/boot/dts/Makefile
index ce66ffd5a1bb..d93f01dddc3f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/Makefile
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/Makefile
@@ -128,6 +128,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
@@ -731,6 +732,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi
index b7f64c7ba83d..77e23e736854 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
index c6fe9db660e2..08c89f176845 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -496,7 +496,7 @@ status = "okay";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	/* WLS1271 WiFi */
 	wlcore: wlcore@1 {
 		compatible = "ti,wl1271";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-evmsk.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-evmsk.dts
index b43b94122d3c..bf05b68274c2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-evmsk.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-evmsk.dts
@@ -648,7 +648,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..8121a199607c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..39e5d2ce600a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
index ea20e4bdf040..0d36e9dd14a4 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1352,8 +1352,7 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
@@ -1723,7 +1722,7 @@
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am33xx.dtsi
index 061858988e99..e14dcb4bbcb6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am3517-evm.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..c8b80f156ec9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am3517-evm.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am3517-evm.dts
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am3517-som.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am3517-som.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d649e9..033b984ff637 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -813,11 +813,14 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	p8 {
 		/*
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-l4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
index 243e35f7a56c..86bf668f3848 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1576,7 +1576,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -2033,7 +2033,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e843cf..d2aebdbc7e0f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -860,7 +860,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi0_pins_default>;
 	pinctrl-1 = <&spi0_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &spi1 {
@@ -868,7 +868,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi1_pins_default>;
 	pinctrl-1 = <&spi1_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &usb2_phy1 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am5718.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am5718.dtsi
index ebf4d3cc1cfb..6d7530a48c73 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am5718.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am5718.dtsi
@@ -17,17 +17,13 @@
  * VCP1, VCP2
  * MLB
  * ISS
- * USB3, USB4
+ * USB3
  */
 
 &usb3_tm {
 	status = "disabled";
 };
 
-&usb4_tm {
-	status = "disabled";
-};
-
 &atl_tm {
 	status = "disabled";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..aed81568a297 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
@@ -610,12 +610,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 768b6c5d2129..92e08486ec81 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -236,6 +236,7 @@
 		status = "okay";
 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};
@@ -306,7 +307,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -341,7 +342,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-388-helios4.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
index fb49df2a3bce..a7ff774d797c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@
 
 	system-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
 		status-led {
 			label = "helios4:green:status";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@
 
 	io-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
 		sata1-led {
 			label = "helios4:green:ata1";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -121,11 +127,15 @@
 	fan1: j10-pwm {
 		compatible = "pwm-fan";
 		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
 	};
 
 	fan2: j17-pwm {
 		compatible = "pwm-fan";
 		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
 	};
 
 	usb2_phy: usb2-phy {
@@ -286,16 +296,22 @@
 						       "mpp39", "mpp40";
 					marvell,function = "sd0";
 				};
-				helios_led_pins: helios-led-pins {
-					marvell,pins = "mpp24", "mpp25",
-						       "mpp49", "mpp50",
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
 						       "mpp52", "mpp53",
 						       "mpp54";
 					marvell,function = "gpio";
 				};
-				helios_fan_pins: helios-fan-pins {
-					marvell,pins = "mpp41", "mpp43",
-						       "mpp48", "mpp55";
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
 					marvell,function = "gpio";
 				};
 				microsom_spi1_cs_pins: spi1-cs-pins {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-38x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..df3c8d1d8f64 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-38x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 654648b05c7c..aeccedd12574 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -266,11 +266,6 @@
 	reg = <0x11000 0x100>;
 };
 
-&i2c1 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11100 0x100>;
-};
-
 &mpic {
 	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 8bec21ed0de5..7a874debb7d5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 8d0f4656aa05..892814c02aa9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 2d44d9ad4e40..e6ad821a8635 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -82,11 +82,6 @@
 	status = "okay";
 };
 
-&vuart {
-	// VUART Host Console
-	status = "okay";
-};
-
 &uart1 {
 	// Host Console
 	status = "okay";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 21ae880c7530..5a4e137fec21 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -156,10 +156,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 
 	pin_mclr_vpp {
 		gpio-hog;
@@ -707,9 +704,9 @@
 	multi-master;
 	status = "okay";
 
-	si7021-a20@20 {
+	si7021-a20@40 {
 		compatible = "silabs,si7020";
-		reg = <0x20>;
+		reg = <0x40>;
 	};
 
 	tmp275@48 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 1deb30ec912c..6e9baf3bba53 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -22,9 +22,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		vga_memory: framebuffer@7f000000 {
+		vga_memory: framebuffer@9f000000 {
 			no-map;
-			reg = <0x7f000000 0x01000000>;
+			reg = <0x9f000000 0x01000000>; /* 16M */
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 4d070d6ba09f..0e8851cec979 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -26,7 +26,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@ba000000 {
+		flash_memory: region@b8000000 {
 			no-map;
 			reg = <0xb8000000 0x4000000>; /* 64M */
 		};
@@ -127,10 +127,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 };
 
 &fmc {
@@ -180,6 +177,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };
 
 &fsim0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
index 82f0213e3a3c..f81a540a3529 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -370,6 +370,7 @@
 						compatible = "aspeed,ast2400-lpc-snoop";
 						reg = <0x10 0x8>;
 						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
index a93009aa2f04..39e690be1704 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -492,6 +492,7 @@
 						compatible = "aspeed,ast2500-lpc-snoop";
 						reg = <0x10 0x8>;
 						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 7028e21bdd98..1ef89dd55d92 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,11 +117,6 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
-	};
-
 	pinctrl_fwspiwp_default: fwspiwp_default {
 		function = "FWSPIWP";
 		groups = "FWSPIWP";
@@ -208,12 +203,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
@@ -653,12 +648,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi
index b58220a49cbd..1cf71bdb4fab 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -357,7 +357,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				compatible = "aspeed,ast2600-gpio";
-				reg = <0x1e780000 0x800>;
+				reg = <0x1e780000 0x400>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-ranges = <&pinctrl 0 0 208>;
 				ngpios = <208>;
@@ -513,6 +513,7 @@
 						compatible = "aspeed,ast2600-lpc-snoop";
 						reg = <0x0 0x80>;
 						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 7c3076e245ef..dc77d8e80e56 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -336,7 +336,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts
index eae28b82c7fd..fd8dc1183b3e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -84,13 +85,15 @@
 		sw1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code=<KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
 		red {
@@ -230,10 +233,9 @@
 		status = "okay";
 
 		eeprom@53 {
-			compatible = "atmel,24c32";
+			compatible = "atmel,24c02";
 			reg = <0x53>;
 			pagesize = <16>;
-			size = <128>;
 			status = "okay";
 		};
 	};
@@ -334,14 +336,6 @@
 };
 
 &pinctrl {
-	atmel,mux-mask = <
-			 /*	A	B	C	*/
-			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
-			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
-			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
-			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
-			 >;
-
 	adc {
 		pinctrl_adc_default: adc_default {
 			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -544,6 +538,10 @@
 				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
 				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
 		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
 	};
 
 	sdmmc1 {
@@ -569,11 +567,22 @@
 			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 		};
 	};
-}; /* pinctrl */
 
-&pmc {
-	atmel,osc-bypass;
-};
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
 
 &pwm0 {
 	pinctrl-names = "default";
@@ -584,7 +593,7 @@
 &sdmmc0 {
 	bus-width = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
 	status = "okay";
 	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -652,7 +661,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
@@ -684,6 +693,8 @@
 	atmel,vbus-gpio = <0
 			   &pioD 15 GPIO_ACTIVE_HIGH
 			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
 	status = "okay";
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index b1f994c0ae79..e4824abb385a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -84,8 +84,8 @@
 				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 
-				ethernet-phy@0 {
-					reg = <0x0>;
+				ethernet-phy@7 {
+					reg = <0x7>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 0e159f879c15..0a53f21a8903 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -70,7 +71,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {
@@ -137,7 +137,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -467,7 +467,7 @@
 		pb4 {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index a06700e53e4c..9c8b3eb49ea3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -62,8 +62,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -81,8 +81,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -104,8 +104,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -146,8 +146,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -161,9 +161,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 6b38fa3f5568..20bcb7480d2e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@
 		sw4 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -204,7 +205,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 6783cf16ff81..00b9e88ff545 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -51,7 +52,7 @@
 		sw4 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -194,8 +195,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -213,8 +214,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -232,8 +233,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -255,7 +256,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -270,8 +270,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -285,8 +285,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -316,21 +316,21 @@
 	status = "okay";
 
 	eeprom@50 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 		status = "okay";
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
 		status = "disabled";
 	};
 
 	eeprom@53 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		status = "disabled";
@@ -692,7 +692,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index c894c7c788a9..317c6ddb5677 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -202,7 +203,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 
 				input@0 {
 					reg = <0>;
@@ -403,7 +404,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 058fae1b4a76..08c5182ba86b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -346,7 +347,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -713,7 +714,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index cf13632edd44..cc55d1684322 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -56,6 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -168,6 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -242,6 +247,31 @@
 						atmel,pins =
 							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -259,6 +289,8 @@
 					   &pioE 3 GPIO_ACTIVE_LOW
 					   &pioE 4 GPIO_ACTIVE_LOW
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
@@ -331,6 +363,8 @@
 
 	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
@@ -347,13 +381,16 @@
 		bp3 {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
 		d2 {
 			label = "d2";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index e5974a17374c..73cb157c4ef5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -90,6 +90,8 @@
 			};
 
 			spi1: spi@fc018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -134,6 +136,11 @@
 						atmel,pins =
 							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_key_gpio: key_gpio_0 {
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -142,6 +149,19 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -159,6 +179,8 @@
 					   &pioE 11 GPIO_ACTIVE_HIGH
 					   &pioE 14 GPIO_ACTIVE_HIGH
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
@@ -245,6 +267,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
 		d8 {
@@ -271,6 +295,8 @@
 
 	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..7e5c598e7e68 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9260ek.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91sam9260ek.dts
index d3446e42b598..ce96345d28a3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9260ek.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91sam9260ek.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 6e6e672c0b86..ca03685f0f08 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -218,6 +219,12 @@
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};
 
@@ -234,7 +241,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
index 5653e70c84b4..36a42a9fe195 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -282,23 +282,26 @@
 				atmel,adc-use-res = "highres";
 
 				trigger0 {
-					trigger-name = "timer-counter-0";
+					trigger-name = "external-rising";
 					trigger-value = <0x1>;
+					trigger-external;
 				};
+
 				trigger1 {
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
 				};
 
 				trigger2 {
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
 				};
 
 				trigger3 {
-					trigger-name = "external";
-					trigger-value = <0x13>;
-					trigger-external;
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
 				};
 			};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
index dacaef2c14ca..ea3dc128b764 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458aad39..84cda16f68a2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
index e895f7cb8c9f..1dae02bb82c2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -269,7 +269,7 @@
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 09a1182c2936..167538518a1e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -28,11 +28,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
@@ -54,8 +54,8 @@
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};
 
@@ -255,15 +255,16 @@
 };
 
 &pcie0 {
-	pci@1,0 {
+	pci@0,0 {
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
 		reg = <0 0 0 0 0>;
 
-		usb@1,0 {
-			reg = <0x10000 0 0 0 0>;
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
 			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2711.dtsi
index 4847dd305317..b50229c3102f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2711.dtsi
@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -395,7 +396,7 @@
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
@@ -432,12 +433,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -446,6 +461,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -454,6 +476,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -462,6 +491,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -480,11 +531,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -514,8 +571,8 @@
 				compatible = "brcm,genet-mdio-v5";
 				reg = <0xe14 0x8>;
 				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
 			};
 		};
 	};
@@ -549,6 +606,8 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
+	gpio-ranges = <&gpio 0 0 58>;
+
 	gpclk0_gpio49: gpclk0_gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..40b9405f1a8e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..11edb581dbaf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..1b435c64bd9c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..a23c25c00eea 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..25d87212cefd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -53,18 +53,17 @@
 			  "GPIO18",
 			  "NC", /* GPIO19 */
 			  "NC", /* GPIO20 */
-			  "GPIO21",
+			  "CAM_GPIO0",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
 			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
 			  "NC", /* GPIO32 */
 			  "NC", /* GPIO33 */
 			  "NC", /* GPIO34 */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..e4e6b6abbfc1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..00582eb2c12e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -74,16 +74,18 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
 			  "NC", /* GPIO42 */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..6f9b3a908f28 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..87ddcad76083 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..d8af8eeac7b6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..77099a7871b0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..90472e76a313 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
@@ -45,7 +45,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..dd4a48604097 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..3dfce4312dfc 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -63,8 +63,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..828a20561b96 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm283x.dtsi
index b83a864e2e8b..ffdf7c4fba46 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm283x.dtsi
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
@@ -420,7 +422,7 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 6a96655d8626..8ed403767540 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3b0029e61b4c..667b118ba4ee 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 90f57bad6b24..ff31ce45831a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fed75e6ab58c..7900aac4f35a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,10 +20,10 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 79542e18915c..4c60eda296d9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index abd35a518046..7d46561fca3c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index c29950b43a95..0e273c598732 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 4dcec6865469..083ec4036bd7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 0e349e39f608..8b1a05a0f1a1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 8f1e565c3db4..7546c8d07bcd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,10 +19,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index ce888b1835d1..beae9eab9cb8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,10 +19,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index ed8619b54d69..ee94455a7236 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,10 +16,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 1f87993eae1d..56d309dbc6b0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,10 +19,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 6c6199a53d09..184e3039aa86 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,10 +30,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..c2a266a439d0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 911c65fbf251..e635a15041dd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	nand: nand@18028000 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 0faae8950375..36d63beba8cd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 50f7cd08cfbb..a6dc99955e19 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index bcc420f85b56..ff98837bc0db 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 9ae815ddbb4b..3d415d874bd3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,10 +16,10 @@
 		bootargs = "earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index a21b2d185596..9f798025748b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 4d5c5aa7dc42..c8dfa4c58d2f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f42a1703f4ab..42097a4c2659 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index ac3a4483dcb3..a2566ad4619c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -15,8 +15,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm53015-meraki-mr26.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..14f58033efeb
--- /dev/null
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a..577a4dc604d9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -20,7 +20,7 @@
 		bootargs = " console=ttyS0,115200n8 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;
 		device_type = "memory";
 	};
@@ -195,3 +195,25 @@
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
index ac3a99cf2079..9fdad20c40d1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
@@ -242,6 +242,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -408,7 +410,7 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
@@ -515,27 +517,27 @@
 		      <0x1811b408 0x004>,
 		      <0x180293a0 0x01c>;
 		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
 				  "spi_lr_session_aborted",
 				  "spi_lr_impatient",
 				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
+				  "spi_lr_overread";
 		clocks = <&iprocmed>;
 		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		spi_nor: spi-nor@0 {
+		spi_nor: flash@0 {
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm63138.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm63138.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94708.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94708.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94709.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94709.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958300k.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958300k.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958305k.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958305k.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958522er.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958522er.dts
index 7be4c4e628e0..5dd1001255c6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958522er.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958522er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525er.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958525er.dts
index e58ed7e95346..0e624c57b585 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525er.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958525er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525xmc.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
index 21f922dc6019..2ac6d61ad297 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
@@ -90,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958622hr.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958622hr.dts
index a49c2fd21f4a..e072fa83537a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958622hr.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958622hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958623hr.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958623hr.dts
index dd6dff6452b8..835f4765efbc 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958623hr.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958623hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625hr.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958625hr.dts
index a71371b4065e..57974b8fab86 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625hr.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958625hr.dts
@@ -89,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625k.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958625k.dts
index 7782b61c51a1..45a043ea77ce 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625k.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm958625k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm963138dvt.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm988312hr.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..16b212cc8a2a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm988312hr.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dm816x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..1825d912b8ab 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dm816x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dm816x.dtsi
@@ -351,7 +351,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
index 3bf90d9e3335..f8c0eee7a62b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1168,7 +1168,7 @@
 			};
 		};
 
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
@@ -1195,7 +1195,7 @@
 			};
 		};
 
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
@@ -1315,7 +1315,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1348,7 +1348,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
@@ -3448,8 +3448,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3477,7 +3476,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
@@ -4095,28 +4094,6 @@
 			};
 		};
 
-		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x140000 0x4>,
-			      <0x140010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0x20000>;
-		};
-
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x170010 0x4>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra7.dtsi
index 4e1bbc0198eb..998932136656 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1090,3 +1091,22 @@
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer15_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer16_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra71x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra71x.dtsi
index cad0e4a2bd8d..9c270d8f75d5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra71x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra71x.dtsi
@@ -11,7 +11,3 @@
 &rtctarget {
 	status = "disabled";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra72x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra72x.dtsi
index d403acc754b6..90617261373c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra72x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
@@ -108,7 +108,3 @@
 &pcie2_rc {
 	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra74x.dtsi
index e1850d6c841a..cfb39dde4930 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/dra74x.dtsi
@@ -49,49 +49,6 @@
 			reg = <0x41500000 0x100>;
 		};
 
-		target-module@48940000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x48940000 0x4>,
-			      <0x48940010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48940000 0x20000>;
-
-			omap_dwc3_4: omap_dwc3_4@0 {
-				compatible = "ti,dwc3";
-				reg = <0 0x10000>;
-				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges;
-				status = "disabled";
-				usb4: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-				};
-			};
-		};
 
 		target-module@41501000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
@@ -188,12 +145,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -201,12 +158,12 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -224,3 +181,52 @@
 &pcie2_rc {
 	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
 };
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 12887b3924af..ad525f2accbb 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -79,7 +79,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
-		interrupts = <5 IRQ_TYPE_NONE>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps14_irq>;
 		reg = <0x66>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-monk.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
index c1a68e612037..7e99e5812a4d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
@@ -200,7 +200,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		wakeup-source;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
index b55afaaa691e..f9e3b13d3aac 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -270,7 +270,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		wakeup-source;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts
index 5370ee477186..ecc9d4dc707e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -136,7 +136,7 @@
 			compatible = "maxim,max17042";
 
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-0 = <&max17042_fuel_irq>;
 			pinctrl-names = "default";
@@ -765,7 +765,7 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
index 7e7c243ff196..255a13666edc 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -174,7 +174,7 @@
 		max77693@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
@@ -223,7 +223,7 @@
 		max77693-fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
@@ -588,7 +588,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
@@ -668,7 +668,7 @@
 	max77686: max77686_pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2983e91bc7dd..869d80be1b36 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -279,7 +279,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		reg = <0x09>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-origen.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4412-origen.dts
index c2e793b69e7d..e2d76ea4404e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-origen.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos4412-origen.dts
@@ -95,7 +95,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..d7d756614edd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -260,7 +260,7 @@
 	};
 
 	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 186790f39e4d..06c4e0996503 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -126,7 +129,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -134,7 +137,7 @@
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		#clock-cells = <1>;
@@ -286,7 +289,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..737f0e20a452 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
 	max77686: max77686@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-spring.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
index a92ade33779c..5a9c936407ea 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
@@ -109,7 +109,7 @@
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 		wakeup-source;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 75b4150c26d7..bd1d8499a108 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -327,6 +327,8 @@
 				regulator-name = "vddq_lcd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				/* Supplies also GPK and GPJ */
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
@@ -637,11 +639,11 @@
 };
 
 &usbdrd_dwc3_0 {
-	dr_mode = "host";
+	dr_mode = "peripheral";
 };
 
 &usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };
 
 &usbdrd3_0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index e5d0a2a4f648..d0aa18443a69 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -560,6 +560,34 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	usb3_1_oc: usb3-1-oc {
+		samsung,pins = "gpk2-4", "gpk2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_1_vbusctrl: usb3-1-vbusctrl {
+		samsung,pins = "gpk2-6", "gpk2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_oc: usb3-0-oc {
+		samsung,pins = "gpk3-0", "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_vbusctrl: usb3-0-vbusctrl {
+		samsung,pins = "gpk3-2", "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
 };
 
 &pinctrl_2 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5410.dtsi
index 60a87684b1af..584ce62361b1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5410.dtsi
@@ -390,6 +390,8 @@
 &usbdrd3_0 {
 	clocks = <&clock CLK_USBD300>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
 };
 
 &usbdrd_phy0 {
@@ -401,6 +403,8 @@
 &usbdrd3_1 {
 	clocks = <&clock CLK_USBD301>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
 };
 
 &usbdrd_dwc3_1 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dd7f8385d81e..3d9b93d2b242 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -349,7 +349,7 @@
 		reg = <0x66>;
 
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 4e49d8095b29..741294bd564e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index b1cf9414ce17..d51c1d8620a0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -509,7 +509,7 @@
 		samsung,s2mps11-acokb-ground;
 
 		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 812659260278..88f5c150a30a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -22,7 +22,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index ddd55d3bcadd..4ef0dbc84b0c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -24,7 +24,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 56acd832f0b3..16e1087ec717 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -22,7 +22,7 @@
 			 * Green LED is much brighter than the others
 			 * so limit its max brightness
 			 */
-			max_brightness = <127>;
+			max-brightness = <127>;
 			linux,default-trigger = "mmc0";
 		};
 
@@ -30,7 +30,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90e3e90..b8acc6eaaa6d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7e1e0a..6544c730340f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf06792..0ebda4efd9d0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
 			};
 		};
 
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
 		usb@68000000 {
 			status = "okay";
 		};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd111.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd222.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini.dtsi
index 065ed10a79fa..07448c03dac9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx23-evk.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx23-evk.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx28-evk.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx28-evk.dts
index 7e2b0f198dfa..1053b7c584d8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx28-evk.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx28-evk.dts
@@ -129,7 +129,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "sst,sst25vf016b", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx28-m28evk.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx28-m28evk.dts
index f3bddc5ada4b..13acdc7916b9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx28-m28evk.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx28-m28evk.dts
@@ -33,7 +33,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "m25p80", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx28-sps1.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx28-sps1.dts
index 43be7a6a769b..90928db0df70 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx28-sps1.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx28-sps1.dts
@@ -51,7 +51,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "everspin,mr25h256", "mr25h256";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
index f98691ae4415..d5c68d1ea707 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,14 +53,40 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -76,8 +102,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 
@@ -388,13 +413,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-ppd.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx53-ppd.dts
index f7dcdf96e5c0..006fbd7f5432 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -313,16 +319,13 @@
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {
@@ -589,7 +592,7 @@
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 65359aece950..7da74e6f46d9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -143,7 +143,7 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;	/* SODIMM 30 */
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
 		status = "disabled";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..864dc5018451 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -297,7 +297,11 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&rmii_clk>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	status = "okay";
 
 	mdio {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-rex-basic.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 7d2c72562c73..ebc0892e37c7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -105,9 +106,13 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -271,6 +276,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
 		chan@1 {
@@ -278,6 +284,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		chan@2 {
@@ -285,6 +292,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 
 		chan@3 {
@@ -292,6 +300,7 @@
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
 			reg = <3>;
+			color = <LED_COLOR_ID_WHITE>;
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl.dtsi
index fdd81fdc3f35..cd3183c36488 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6dl.dtsi
@@ -84,6 +84,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-apalis-eval.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-apalis-eval.dts
index fab83abb6466..a0683b4aeca1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -140,7 +140,7 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
 		status = "disabled";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index 1614b1ae501d..86e84781cf5d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -145,7 +145,7 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
 		status = "disabled";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index fa9f98dd15ac..62e72773e53b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -144,7 +144,7 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
 		status = "disabled";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-ba16.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..133991ca8c63 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -139,7 +139,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 2a98cc657595..66be04299cbf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-cm-fx6.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bfb530f29d9d..1ad41c944b4b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -260,7 +260,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c389..e3de2b487cf4 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -96,30 +96,40 @@
 			reg = <0>;
 			max-speed = <100>;
 			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <1000>;
-			reset-post-delay-us = <1000>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
 		};
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c3 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	ltc3676: pmic@3c {
@@ -285,6 +295,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c2: i2c2-grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
@@ -292,6 +309,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c3: i2c3-grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
@@ -299,6 +323,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
 	pinctrl_pmic_hw300: pmic-hw300-grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
@@ -406,6 +437,18 @@
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index fa2307d8ce86..4dee1b22d5c1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -102,7 +102,7 @@
 	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dms-ba16.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 48fb47e715f6..137db38f0d27 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-gw5400-a.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 4cde45d5c90c..e894faba571f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-marsboard.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-marsboard.dts
index 05ee28388229..cc1801002394 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-marsboard.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -100,7 +100,7 @@
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-rex-pro.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts
index 861e05d53157..343364d3e4f7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -16,6 +16,13 @@
 		stdout-path = &uart1;
 	};
 
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		/delete-property/ mmc3;
+	};
+
 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q.dtsi
index 5277e3903291..afec1677e6ba 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6q.dtsi
@@ -163,6 +163,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 30fa349f9d05..a696873dc1ab 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -286,6 +286,8 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -516,8 +518,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -810,6 +810,12 @@
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e21f6ac864e5..baa197c90060 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -96,7 +96,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index ead7ba27e105..ff8cb47fb9fd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-colibri.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 4e2a309c93fa..1e86b3814708 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -132,7 +132,7 @@
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-0 = <&pinctrl_i2c2_gpio>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
@@ -488,7 +488,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
 			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 648f5fcb72e6..2c1d6f28e695 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -35,7 +35,7 @@
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25vf040b", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784..c4e146f3341b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 736074f1c3ef..959d8ac2e393 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -418,7 +418,7 @@
 
 			/* VDD_AUD_1P8: Audio codec */
 			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8a";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 24f793ca2886..37d94aa45a8b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";
@@ -137,7 +127,7 @@
 
 	lcd_backlight: lcd-backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		pwm-names = "LCD_BKLT_PWM";
 
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -167,7 +157,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 
 	i2c_cam: i2c-gpio-cam {
@@ -179,7 +169,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 };
 
@@ -258,8 +248,8 @@
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: spi-flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index d526f01a2c52..b7e74d859a96 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -179,7 +179,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index a0917823c244..a88323ac6c69 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -321,7 +321,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..ee7e2371f94b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -252,7 +252,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 1243677b5f97..5adeb7aed220 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -237,7 +237,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e361df26a168..33a70f436aa3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -315,8 +315,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -403,6 +403,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -432,6 +433,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -441,5 +443,6 @@
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi
index 5de4ccb97916..f7a56d6b160c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index afe477f32984..17535bf12516 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -272,7 +272,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index fdc3aa9d544d..0aa1a0a28de0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -313,7 +313,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f824c9abd11a..758c62fb9cac 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -194,7 +194,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index b06577808ff4..c56337b63c3b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,9 +53,14 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -63,10 +68,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: ethernet-phy@0 {
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
 			reg = <0>;
 			qca,clk-out-frequency = <125000000>;
 		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
 	};
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index e6aa0c33754d..966038ecc5bf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -226,7 +226,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..ccfa8e320be6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index c070893c509e..5bad982bc5a0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -289,6 +289,7 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl.dtsi
index 4412d7e856fb..a498f7aace5b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qdl.dtsi
@@ -756,7 +756,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qp.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qp.dtsi
index b310f13a53f2..4d23c92aa8a6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qp.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sl-evk.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sl-evk.dts
index 25f6f2fb1555..f16c830f1e91 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sl-evk.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sl-evk.dts
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sl.dtsi
index 60639b42dee2..1488b6d418ff 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sl.dtsi
@@ -114,6 +114,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sll.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sll.dtsi
index e9b9bed8bbcc..811a6db825d6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sll.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sll.dtsi
@@ -115,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 66af78e83b70..a2c79bcf9a11 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -107,7 +107,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index dce5dcf96c25..7dda42553f4b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -123,7 +123,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: s25fl128s@0 {
+	flash0: flash@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +133,7 @@
 		spi-tx-bus-width = <4>;
 	};
 
-	flash1: s25fl128s@2 {
+	flash1: flash@2 {
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts
index 5a63ca615722..1b808563a536 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -108,7 +108,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -118,7 +118,7 @@
 		reg = <0>;
 	};
 
-	flash1: n25q256a@2 {
+	flash1: flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx.dtsi
index 24651e85fc67..9867bc4f1758 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6sx.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6sx.dtsi
@@ -161,12 +161,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 64c2d1e9f7fc..71d3c7e05e08 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -239,7 +239,7 @@
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
index 47d3ce5d255f..acd936540d89 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -19,7 +19,7 @@
 };
 
 &qspi {
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
index a095a7654ac6..29ed38dce580 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
@@ -18,7 +18,7 @@
 };
 
 &qspi {
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index 2a449a3c1ae2..09a83dbdf651 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -19,7 +19,7 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul.dtsi
index 3a326705b2a8..c1d0ddd19788 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ul.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ul.dtsi
@@ -62,20 +62,18 @@
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
@@ -147,6 +145,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -540,7 +541,7 @@
 			};
 
 			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_KPP>;
@@ -994,7 +995,7 @@
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
@@ -1003,7 +1004,7 @@
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
@@ -1024,7 +1025,7 @@
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index a0545431b3dc..9f1e38282bee 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -43,6 +43,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 4436556624d6..548cfcc7a01d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
index b7e984284e1a..d000606c0704 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
@@ -18,7 +18,7 @@
 };
 
 &qspi {
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
index ecbb2cc5b9ab..79cc45728cd2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -14,5 +14,6 @@
 };
 
 &gpmi {
+	fsl,use-minimum-ecc;
 	status = "okay";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-colibri-aster.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index 9fa701bec2ec..139188eb9f40 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -99,7 +99,7 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
 	};
 
 	/* M41T0M6 real time clock on carrier board */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 97601375f264..3caf450735d7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -124,7 +124,7 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;	/* SODIMM 30 */
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
 		status = "disabled";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -293,7 +293,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi
index 50abf18ad30b..887497e3bb4b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -250,7 +250,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index af39e5370fa1..045e4413d339 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -13,6 +13,10 @@
 	};
 };
 
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
 &gpio6 {
 	gpio-line-names = "",
 			  "",
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0..dd8003bd1fc0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	keep-power-in-suspend;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
 	broken-cd;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..e519897fae08 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -351,7 +351,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	wakeup-source;
 	no-1-8-v;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-sdb.dts
index ac0751bc1177..6d562ebe9029 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-sdb.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7d-sdb.dts
@@ -199,12 +199,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
@@ -378,14 +373,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7s-warp.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7s-warp.dts
index d6b4888fa686..e035dd5bf4f6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7s-warp.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7s.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7s.dtsi
index f050ef238fb4..3fec5991d24d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7s.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7s.dtsi
@@ -102,6 +102,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};
 
@@ -1104,7 +1105,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7ulp.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..bcec98b96411 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/integratorap.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/integratorap.dts
index 67d1f9b24a52..8600c0548525 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/integratorap.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/integratorap.dts
@@ -153,6 +153,7 @@
 
 	pci: pciv3@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 7b151acb9984..88b70ba1c8fe 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index 2a0a98fe67f0..3240c67e0c39 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/lpc32xx.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
index 7b7ec7b1217b..824393e1bcfb 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
@@ -329,9 +329,6 @@
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
-
-					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
-					assigned-clock-rates = <208000000>;
 				};
 			};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..aca78b5eddf2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/ls1021a.dtsi
index 827373ef1a54..37026b2fa649 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/ls1021a.dtsi
@@ -331,39 +331,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -1018,4 +985,37 @@
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson.dtsi
index 7649dd1e0b9e..c928ae312e19 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson.dtsi
@@ -42,14 +42,14 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -87,7 +87,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -203,7 +203,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8.dtsi
index 04688e8abce2..08533116a39c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8.dtsi
@@ -251,8 +251,13 @@
 					  "pp2", "ppmmu2", "pp4", "ppmmu4",
 					  "pp5", "ppmmu5", "pp6", "ppmmu6";
 			resets = <&reset RESET_MALI>;
+
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
 			operating-points-v2 = <&gpu_opp_table>;
 		};
 	};
@@ -593,27 +598,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-ec100.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
index ed06102a4014..c6824d26dbbf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
@@ -153,7 +153,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -237,7 +237,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-mxq.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
index 33037ef62d0a..b2edac1fce6d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
@@ -39,6 +39,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -84,7 +86,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
index 0c26467de4d0..73ce1c13da24 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -136,7 +136,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -168,7 +168,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -224,7 +224,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b.dtsi
index 2401cdf5f751..f6eb7c803174 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8b.dtsi
@@ -586,27 +586,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index cc498191ddd1..8f4eb1ed4581 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -81,7 +81,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/motorola-mapphone-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index d5ded4f794df..5f8f77cfbe59 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -430,7 +430,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&touchscreen_pins>;
 
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
 
 		/* gpio_183 with sys_nirq2 pad as wakeup */
 		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/moxart.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/moxart.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd13451..e7534fe9c53c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-beagle-ab4.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-beagle.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-beagle.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 2c19d6e255bd..6883ccb45600 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
index c8745bc800f7..cc8a378dd076 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
@@ -114,7 +116,7 @@
 		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
 		/* lcd panel */
@@ -124,7 +126,6 @@
 			spi-max-frequency = <100000>;
 			spi-cpol;
 			spi-cpha;
-			spi-cs-high;
 
 			backlight= <&backlight>;
 			label = "lcd";
@@ -516,7 +517,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n900.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478..d40c3d2c4914 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n900.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,7 @@
 
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		led@0 {
+			reg = <0>;
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan1 {
+		led@1 {
+			reg = <1>;
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan2 {
+		led@2 {
+			reg = <2>;
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan3 {
+		led@3 {
+			reg = <3>;
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan4 {
+		led@4 {
+			reg = <4>;
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan5 {
+		led@5 {
+			reg = <5>;
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan6 {
+		led@6 {
+			reg = <6>;
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan7 {
+		led@7 {
+			reg = <7>;
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan8 {
+		led@8 {
+			reg = <8>;
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 11d41e86f814..7dde9fbb06d3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -494,3 +494,11 @@
 		clock-names = "sysclk";
 	};
 };
+
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
+	status = "disabled";
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f105..218a10c0d815 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3.dtsi
index 9dcae1f2bc99..c5b9da0d7e6c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3.dtsi
@@ -24,6 +24,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3430-sdp.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
index c5b903718414..7d530ae3483b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
@@ -101,7 +101,7 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-l4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap4-l4.dtsi
index de742bf84efb..5015df4d876c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-l4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap4-l4.dtsi
@@ -597,11 +597,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-panda-es.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
index cfa85aa3da08..6afa8fd7c412 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
@@ -46,7 +46,7 @@
 
 	button_pins: pinmux_button_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap4.dtsi
index d6475cc6a91a..049174086756 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap443x.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap443x.dtsi
index cb309743de5d..dd8ef58cbaed 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap443x.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap443x.dtsi
@@ -33,10 +33,12 @@
 	};
 
 	ocp {
+		/* 4430 has only gpio_86 tshut and no talert interrupt */
 		bandgap: bandgap@4a002260 {
 			reg = <0x4a002260 0x4
 			       0x4a00232C 0x4>;
 			compatible = "ti,omap4430-bandgap";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
 			#thermal-sensor-cells = <0>;
 		};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
index 532868591107..1f1c04d8f472 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -770,14 +770,6 @@
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f13626cfd1..3a8f10231475 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-l4.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap5-l4.dtsi
index f3d3a16b7c64..c67c8698cc30 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-l4.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap5-l4.dtsi
@@ -613,11 +613,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap5.dtsi
index 2bf2e5839a7f..530210db2719 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ox820.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/ox820.dtsi
index 90846a7655b4..dde4364892bf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ox820.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/ox820.dtsi
@@ -287,7 +287,7 @@
 				clocks = <&armclk>;
 			};
 
-			gic: gic@1000 {
+			gic: interrupt-controller@1000 {
 				compatible = "arm,arm11mp-gic";
 				interrupt-controller;
 				#interrupt-cells = <3>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index c4c6c7e9e37b..5898879a3038 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -45,18 +45,21 @@
 		emac: gem@30000 {
 			compatible = "cadence,gem";
 			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <31>;
 		};
 
 		dmac1: dmac@40000 {
 			compatible = "snps,dw-dmac";
 			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <25>;
 		};
 
 		dmac2: dmac@50000 {
 			compatible = "snps,dw-dmac";
 			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <26>;
 		};
 
@@ -233,6 +236,7 @@
 		axi2pico@c0000000 {
 			compatible = "picochip,axi2pico-pc3x2";
 			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <13 14 15 16 17 18 19 20 21>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
index 2687c4e890ba..72c4a9fc41a2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -198,7 +198,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -1148,7 +1148,7 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -1163,7 +1163,6 @@
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1262,9 +1261,9 @@
 				<&mmcc DSI1_BYTE_CLK>,
 				<&mmcc DSI_PIXEL_CLK>,
 				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
-					"src_clk", "byte_clk", "pixel_clk",
-					"core_clk";
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
 
 			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
 					<&mmcc DSI1_ESC_SRC>,
@@ -1306,7 +1305,7 @@
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
 			clock-names = "iface_clk", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
 		};
 
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 74d8e2c8e4b3..3defd47fd8fa 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 282b89ce3d45..33545cf40f3a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
 	};
 
-	mdio0: mdio@0 {
+	mdio0: mdio-0 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@
 		};
 	};
 
-	mdio1: mdio@1 {
+	mdio1: mdio-1 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi
index dda2ceec6591..ad9b52d53ef9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -324,6 +324,7 @@
 
 				pmicgpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..c197927e7435 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -146,7 +146,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -192,7 +194,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -318,7 +320,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
index 51f5f904f9eb..5f7426fb4e41 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1528,8 +1528,8 @@
 				#phy-cells = <0>;
 				qcom,dsi-phy-index = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
 			};
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi
index 2fd59c440903..c73e5b149ac5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -25,6 +25,7 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
index d2240b89ee52..465845323495 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -145,7 +145,7 @@
 	status = "okay";
 
 	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du", "dclkin.0";
+	clock-names = "du.0", "dclkin.0";
 
 	ports {
 		port@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779.dtsi linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7779.dtsi
index 74d7e9084eab..3c5fcdfe16b8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779.dtsi
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7779.dtsi
@@ -463,6 +463,7 @@
 		reg = <0xfff80000 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		clock-names = "du.0";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7790-lager.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7790-lager.dts
index 09a152b91557..1d6f0c5d02e9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7790-lager.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
 		i2c11 = &i2cexio1;
 		i2c12 = &i2chdmi;
 		i2c13 = &i2cpwr;
+		mmc0 = &mmcif1;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts
index f603cba5441f..6af1727b8269 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
 		i2c12 = &i2cexio1;
 		i2c13 = &i2chdmi;
 		i2c14 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-porter.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7791-porter.dts
index c6d563fb7ec7..bf51e29c793a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-porter.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
 		serial0 = &scif0;
 		i2c9 = &gpioi2c2;
 		i2c10 = &i2chdmi;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7793-gose.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
index abf487e8fe0f..2b59a0491350 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
+++ linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7794-alt.dts linux-libre-5.10.150-gnu1/arch/arm/boot/dts/r8a7794-alt.dts
index 3f1cc5bbf329..32025986b3b9