diff --git linux-libre-5.10-gnu1/.gitignore linux-libre-5.10.233-gnu1/.gitignore
index d01cda8e1177..f53e8be649a2 100644
--- linux-libre-5.10-gnu1/.gitignore
+++ linux-libre-5.10.233-gnu1/.gitignore
@@ -55,6 +55,7 @@ modules.order
 /tags
 /TAGS
 /linux
+/modules-only.symvers
 /vmlinux
 /vmlinux.32
 /vmlinux.symvers
@@ -123,7 +124,6 @@ GTAGS
 # id-utils files
 ID
 
-*.orig
 *~
 \#*#
 
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-5.10.233-gnu1/Documentation/ABI/testing/configfs-usb-gadget-uvc
index ac5e11af79a8..4b1813994bd0 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -51,7 +51,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/evm linux-libre-5.10.233-gnu1/Documentation/ABI/testing/evm
index 3c477ba48a31..2243b72e4110 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/evm
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/evm
@@ -49,8 +49,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-ata linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..299e0d1dc161 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-ata
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-iio
index df42bed09f25..53f07fc41b96 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-iio
@@ -142,7 +142,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
deleted file mode 100644
index 73498ff666bd..000000000000
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
+++ /dev/null
@@ -1,62 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the current preset value. Writing sets the
-		preset value. Encoder counts continuously from 0 to preset
-		value, depending on direction (up/down).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		- non-quadrature:
-			Encoder IN1 input servers as the count input (up
-			direction).
-
-		- quadrature:
-			Encoder IN1 and IN2 inputs are mixed to get direction
-			and count.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible active edges.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_polarity
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device encoder/counter active edge:
-
-		- rising-edge
-		- falling-edge
-		- both-edges
-
-		In non-quadrature mode, device counts up on active edge.
-
-		In quadrature mode, encoder counting scenarios are as follows:
-
-		+---------+----------+--------------------+--------------------+
-		| Active  | Level on |      IN1 signal    |     IN2 signal     |
-		| edge    | opposite +----------+---------+----------+---------+
-		|         | signal   |  Rising  | Falling |  Rising  | Falling |
-		+---------+----------+----------+---------+----------+---------+
-		| Rising  | High ->  |   Down   |    -    |   Up     |    -    |
-		| edge    | Low  ->  |   Up     |    -    |   Down   |    -    |
-		+---------+----------+----------+---------+----------+---------+
-		| Falling | High ->  |    -     |   Up    |    -     |   Down  |
-		| edge    | Low  ->  |    -     |   Down  |    -     |   Up    |
-		+---------+----------+----------+---------+----------+---------+
-		| Both    | High ->  |   Down   |   Up    |   Up     |   Down  |
-		| edges   | Low  ->  |   Up     |   Down  |   Down   |   Up    |
-		+---------+----------+----------+---------+----------+---------+
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610 linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b6..af31e5a22d89 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
index 8316c33862a0..0aa02bf2bde5 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -39,9 +39,11 @@ KernelVersion:	v5.9
 Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
 Description:
 		(RO) Report various performance stats related to papr-scm NVDIMM
-		device.  Each stat is reported on a new line with each line
-		composed of a stat-identifier followed by it value. Below are
-		currently known dimm performance stats which are reported:
+		device. This attribute is only available for NVDIMM devices
+		that support reporting NVDIMM performance stats. Each stat is
+		reported on a new line with each line composed of a
+		stat-identifier followed by it value. Below are currently known
+		dimm performance stats which are reported:
 
 		* "CtlResCt" : Controller Reset Count
 		* "CtlResTm" : Controller Reset Elapsed Time
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-pci linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-pci
index 77ad9ec3c801..da33ab66ddfe 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-pci
@@ -131,6 +131,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-usb linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-usb
index bf2c1968525f..73eb23bc1f34 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-usb
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-bus-usb
@@ -154,17 +154,6 @@ Description:
 		files hold a string value (enable or disable) indicating whether
 		or not USB3 hardware LPM U1 or U2 is enabled for the device.
 
-What:		/sys/bus/usb/devices/.../removable
-Date:		February 2012
-Contact:	Matthew Garrett <mjg@redhat.com>
-Description:
-		Some information about whether a given USB device is
-		physically fixed to the platform can be inferred from a
-		combination of hub descriptor bits and platform-specific data
-		such as ACPI. This file will read either "removable" or
-		"fixed" if the information is available, and "unknown"
-		otherwise.
-
 What:		/sys/bus/usb/devices/.../ltm_capable
 Date:		July 2012
 Contact:	Sarah Sharp <sarah.a.sharp@linux.intel.com>
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
index b8ebff4b1c4c..4514cf9fc7a1 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
@@ -66,6 +66,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../userspace/set_freq
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devlink linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-devlink
index b662f747c83e..8a21ce515f61 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devlink
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-devlink
@@ -5,8 +5,8 @@ Description:
 		Provide a place in sysfs for the device link objects in the
 		kernel at any given time.  The name of a device link directory,
 		denoted as ... above, is of the form <supplier>--<consumer>
-		where <supplier> is the supplier device name and <consumer> is
-		the consumer device name.
+		where <supplier> is the supplier bus:device name and <consumer>
+		is the consumer bus:device name.
 
 What:		/sys/class/devlink/.../auto_remove_on
 Date:		May 2020
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-net-queues
index 978b76358661..40d5aab8452d 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible vaules depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-consumer linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
index 1f06d74d1c3c..0809fda092e6 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../consumer:<consumer> are symlinks to device
 		links where this device is the supplier. <consumer> denotes the
-		name of the consumer in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the consumer in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-memory linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-memory
index 2da2b1fba2c1..16a727a611b1 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-memory
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-memory
@@ -26,8 +26,9 @@ Date:		September 2008
 Contact:	Badari Pulavarty <pbadari@us.ibm.com>
 Description:
 		The file /sys/devices/system/memory/memoryX/phys_device
-		is read-only and is designed to show the name of physical
-		memory device.  Implementation is currently incomplete.
+		is read-only;  it is a legacy interface only ever used on s390x
+		to expose the covered storage increment.
+Users:		Legacy s390-tools lsmem/chmem
 
 What:		/sys/devices/system/memory/memoryX/phys_index
 Date:		September 2008
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-removable linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-removable
new file mode 100644
index 000000000000..acf7766e800b
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-removable
@@ -0,0 +1,17 @@
+What:		/sys/devices/.../removable
+Date:		May 2021
+Contact:	Rajat Jain <rajatxjain@gmail.com>
+Description:
+		Information about whether a given device can be removed from the
+		platform by the	user. This is determined by its subsystem in a
+		bus / platform-specific way. This attribute is only present for
+		devices that can support determining such information:
+
+		"removable": device can be removed from the platform by the user
+		"fixed":     device is fixed to the platform / cannot be removed
+			     by the user.
+		"unknown":   The information is unavailable / cannot be deduced.
+
+		Currently this is only supported by USB (which infers the
+		information from a combination of hub descriptor bits and
+		platform-specific data such as ACPI).
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-supplier linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
index a919e0db5e90..207f5972e98d 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../supplier:<supplier> are symlinks to device
 		links where this device is the consumer. <supplier> denotes the
-		name of the supplier in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the supplier in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
index 1a04ca8162ad..2a273bfebed0 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -501,15 +501,19 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpu#.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/retbleed
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ac2947b98950..3d5de44cbbee 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -42,5 +42,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created backends.
+                that this option only takes effect on newly connected backends.
                 The default is Y (enable).
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index 28008905615f..1f7659aa085c 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -15,5 +15,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created frontends.
+                that this option only takes effect on newly connected frontends.
                 The default is Y (enable).
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-platform-asus-wmi linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 04885738cf15..0f8f0772d6f3 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ linux-libre-5.10.233-gnu1/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -57,3 +57,12 @@ Description:
 			* 0 - default,
 			* 1 - overboost,
 			* 2 - silent
+
+What:		/sys/devices/platform/<platform>/dgpu_disable
+Date:		Aug 2022
+KernelVersion:	5.17
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Disable discrete GPU:
+			* 0 - Enable dGPU,
+			* 1 - Disable dGPU
diff --git linux-libre-5.10-gnu1/Documentation/accounting/psi.rst linux-libre-5.10.233-gnu1/Documentation/accounting/psi.rst
index f2b3439edcc2..860fe651d645 100644
--- linux-libre-5.10-gnu1/Documentation/accounting/psi.rst
+++ linux-libre-5.10.233-gnu1/Documentation/accounting/psi.rst
@@ -92,7 +92,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst
index 12757e63b26c..7882037aca67 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -82,6 +82,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -740,8 +742,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
index 3ab4f7756a6e..bf878c879afb 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -177,14 +177,20 @@ bitmap_flush_interval:number
 	The bitmap flush interval in milliseconds. The metadata buffers
 	are synchronized when this interval expires.
 
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
 fix_padding
 	Use a smaller padding of the tag area that is more
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-allow_discards
-	Allow block discard requests (a.k.a. TRIM) for the integrity device.
-	Discards are only allowed to devices using internal hash.
+legacy_recalculate
+	Allow recalculating of volumes with HMAC keys. This is disabled by
+	default for security reasons - an attacker could modify the volume,
+	set recalc_sector to zero, and the kernel would not detect the
+	modification.
 
 The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
 allow_discards can be changed when reloading the target (load an inactive
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/devices.txt linux-libre-5.10.233-gnu1/Documentation/admin-guide/devices.txt
index 63fd4e6a014b..8b738855e1c5 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/devices.txt
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/devices.txt
@@ -3003,10 +3003,10 @@
 		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
 		  ...
 		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		192 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		193 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
 		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+		223 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
 
  232 char	Biometric Devices
 		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/index.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/index.rst
index ca4dbdd9016d..e020d1637e1c 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/index.rst
@@ -15,3 +15,7 @@ are configurable at compile, boot or run time.
    tsx_async_abort
    multihit.rst
    special-register-buffer-data-sampling.rst
+   processor_mmio_stale_data.rst
+   gather_data_sampling.rst
+   srso
+   reg-file-data-sampling
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..c98fd11907cc
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,260 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+	 Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+	 data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+	 Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+	 Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+	 values as part of MD_CLEAR operations. Processors that do not
+	 enumerate MDS_NO (meaning they are affected by MDS) but that do
+	 enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+	 FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+	 IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+	 bit can be set to cause the VERW instruction to not perform the
+	 FB_CLEAR action. Not all processors that support FB_CLEAR will support
+	 FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities  have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel reuses the MDS function to invoke the buffer clearing:
+
+	mds_clear_cpu_buffers()
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+  ==========  =================================================================
+  full        If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and when entering a VM. Idle transitions are
+              protected as well. It does not automatically disable SMT.
+  full,nosmt  Same as full, with SMT disabled on vulnerable CPUs. This is the
+              complete mitigation.
+  off         Disables mitigation completely.
+  ==========  =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable, but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+     * - 'Unknown: No mitigations'
+       - The processor vulnerability status is unknown because it is
+	 out of Servicing period. Mitigation is not attempted.
+
+Definitions:
+------------
+
+Servicing period: The process of providing functional and security updates to
+Intel processors or platforms, utilizing the Intel Platform Update (IPU)
+process or other similar mechanisms.
+
+End of Servicing Updates (ESU): ESU is the date at which Intel will no
+longer provide Servicing, such as through IPU or other similar update
+processes. ESU dates will typically be aligned to end of quarter.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+  ========================  ===========================================
+  'SMT vulnerable'          SMT is enabled
+  'SMT disabled'            SMT is disabled
+  'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+  ========================  ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..810424b4b7f6
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ALDERLAKE_N             06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..305600351209 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -407,6 +422,14 @@ The possible values in this file are:
   'RSB filling'   Protection of RSB on context switch enabled
   =============   ===========================================
 
+  - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status:
+
+  ===========================  =======================================================
+  'PBRSB-eIBRS: SW sequence'   CPU is affected and protection of RSB on VMEXIT enabled
+  'PBRSB-eIBRS: Vulnerable'    CPU is vulnerable
+  'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
+  ===========================  =======================================================
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -456,8 +479,19 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks.
+
+   On Intel's enhanced IBRS systems, this includes cross-thread branch target
+   injections on SMT systems (STIBP). In other words, Intel eIBRS enables
+   STIBP, too.
+
+   AMD Automatic IBRS does not protect userspace, and Legacy IBRS systems clear
+   the IBRS bit on exit to userspace, therefore both explicitly enable STIBP.
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -468,7 +502,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -481,9 +515,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
@@ -584,12 +621,14 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   Enhanced/Auto IBRS
+                eibrs,retpoline         Enhanced/Auto IBRS + Retpolines
+                eibrs,lfence            Enhanced/Auto IBRS + LFENCE
+                ibrs                    use IBRS to protect kernel
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -730,7 +769,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/srso.rst
new file mode 100644
index 000000000000..f79cb11b080f
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/hw-vuln/srso.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Speculative Return Stack Overflow (SRSO)
+========================================
+
+This is a mitigation for the speculative return stack overflow (SRSO)
+vulnerability found on AMD processors. The mechanism is by now the well
+known scenario of poisoning CPU functional units - the Branch Target
+Buffer (BTB) and Return Address Predictor (RAP) in this case - and then
+tricking the elevated privilege domain (the kernel) into leaking
+sensitive data.
+
+AMD CPUs predict RET instructions using a Return Address Predictor (aka
+Return Address Stack/Return Stack Buffer). In some cases, a non-architectural
+CALL instruction (i.e., an instruction predicted to be a CALL but is
+not actually a CALL) can create an entry in the RAP which may be used
+to predict the target of a subsequent RET instruction.
+
+The specific circumstances that lead to this varies by microarchitecture
+but the concern is that an attacker can mis-train the CPU BTB to predict
+non-architectural CALL instructions in kernel space and use this to
+control the speculative target of a subsequent kernel RET, potentially
+leading to information disclosure via a speculative side-channel.
+
+The issue is tracked under CVE-2023-20569.
+
+Affected processors
+-------------------
+
+AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older
+processors have not been investigated.
+
+System information and options
+------------------------------
+
+First of all, it is required that the latest microcode be loaded for
+mitigations to be effective.
+
+The sysfs file showing SRSO mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
+
+The possible values in this file are:
+
+ - 'Not affected'               The processor is not vulnerable
+
+ - 'Vulnerable: no microcode'   The processor is vulnerable, no
+                                microcode extending IBPB functionality
+                                to address the vulnerability has been
+                                applied.
+
+ - 'Mitigation: microcode'      Extended IBPB functionality microcode
+                                patch has been applied. It does not
+                                address User->Kernel and Guest->Host
+                                transitions protection but it does
+                                address User->User and VM->VM attack
+                                vectors.
+
+                                (spec_rstack_overflow=microcode)
+
+ - 'Mitigation: safe RET'       Software-only mitigation. It complements
+                                the extended IBPB microcode patch
+                                functionality by addressing User->Kernel
+                                and Guest->Host transitions protection.
+
+                                Selected by default or by
+                                spec_rstack_overflow=safe-ret
+
+ - 'Mitigation: IBPB'           Similar protection as "safe RET" above
+                                but employs an IBPB barrier on privilege
+                                domain crossings (User->Kernel,
+                                Guest->Host).
+
+                                (spec_rstack_overflow=ibpb)
+
+ - 'Mitigation: IBPB on VMEXIT' Mitigation addressing the cloud provider
+                                scenario - the Guest->Host transitions
+                                only.
+
+                                (spec_rstack_overflow=ibpb-vmexit)
+
+In order to exploit vulnerability, an attacker needs to:
+
+ - gain local access on the machine
+
+ - break kASLR
+
+ - find gadgets in the running kernel in order to use them in the exploit
+
+ - potentially create and pin an additional workload on the sibling
+   thread, depending on the microarchitecture (not necessary on fam 0x19)
+
+ - run the exploit
+
+Considering the performance implications of each mitigation type, the
+default one is 'Mitigation: safe RET' which should take care of most
+attack vectors, including the local User->Kernel one.
+
+As always, the user is advised to keep her/his system up-to-date by
+applying software updates regularly.
+
+The default setting will be reevaluated when needed and especially when
+new attack vectors appear.
+
+As one can surmise, 'Mitigation: safe RET' does come at the cost of some
+performance depending on the workload. If one trusts her/his userspace
+and does not want to suffer the performance impact, one can always
+disable the mitigation with spec_rstack_overflow=off.
+
+Similarly, 'Mitigation: IBPB' is another full mitigation type employing
+an indrect branch prediction barrier after having applied the required
+microcode patch for one's system. This mitigation comes also at
+a performance cost.
+
+Mitigation: safe RET
+--------------------
+
+The mitigation works by ensuring all RET instructions speculate to
+a controlled location, similar to how speculation is controlled in the
+retpoline sequence.  To accomplish this, the __x86_return_thunk forces
+the CPU to mispredict every function return using a 'safe return'
+sequence.
+
+To ensure the safety of this mitigation, the kernel must ensure that the
+safe return sequence is itself free from attacker interference.  In Zen3
+and Zen4, this is accomplished by creating a BTB alias between the
+untraining function srso_alias_untrain_ret() and the safe return
+function srso_alias_safe_ret() which results in evicting a potentially
+poisoned BTB entry and using that safe one for all function returns.
+
+In older Zen1 and Zen2, this is accomplished using a reinterpretation
+technique similar to Retbleed one: srso_untrain_ret() and
+srso_safe_ret().
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-5.10.233-gnu1/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.10.233-gnu1/Documentation/admin-guide/kernel-parameters.txt
index 44fde25bb221..097ef49b3d3a 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/kernel-parameters.txt
@@ -577,6 +577,12 @@
 			loops can be debugged more effectively on production
 			systems.
 
+	clocksource.max_cswd_read_retries= [KNL]
+			Number of clocksource_watchdog() retries due to
+			external delays before the clock will be marked
+			unstable.  Defaults to three retries, that is,
+			four attempts to read the clock under test.
+
 	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
@@ -860,10 +866,6 @@
 
 	debugpat	[X86] Enable PAT debugging
 
-	decnet.addr=	[HW,NET]
-			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.rst.
-
 	default_hugepagesz=
 			[HW] The size of the default HugeTLB page. This is
 			the size represented by the legacy /proc/ hugepages
@@ -991,6 +993,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously.
 			Format: <driver_name1>,<driver_name2>...
@@ -1445,6 +1467,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:    Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -1611,6 +1653,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -2095,24 +2139,57 @@
 
 	ivrs_ioapic	[HW,X86-64]
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map IOAPIC-ID decimal 10 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
+			* To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_hpet	[HW,X86-64]
 			Provide an override to the HPET-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map HPET-ID decimal 0 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map HPET-ID decimal 0 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
+			* To map HPET-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map UART-HID:UID AMD0020:0 to
-			PCI device 00:14.5 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map UART-HID:UID AMD0020:0 to
+			PCI segment 0x1 and PCI device ID 00:14.5,
+			write the parameter as:
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
+
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
@@ -2288,8 +2365,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -2846,20 +2927,24 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
+				Equivalent to: gather_data_sampling=off [X86]
 					       kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
+					       kvm.nx_huge_pages=off [X86]
+					       l1tf=off [X86]
+					       mds=off [X86]
+					       mmio_stale_data=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
+					       reg_file_data_sampling=off [X86]
+					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_v2_user=off [X86]
 					       ssbd=force-off [ARM64]
-					       l1tf=off [X86]
-					       mds=off [X86]
 					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
-					       no_entry_flush [PPC]
-					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -2881,6 +2966,8 @@
 				Equivalent to: l1tf=flush,nosmt [X86]
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
+					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -2890,6 +2977,40 @@
 			log everything. Information is printed at KERN_DEBUG
 			so loglevel=8 may also need to be specified.
 
+	mmio_stale_data=
+			[X86,INTEL] Control mitigation for the Processor
+			MMIO Stale Data vulnerabilities.
+
+			Processor MMIO Stale Data is a class of
+			vulnerabilities that may expose data after an MMIO
+			operation. Exposed data could originate or end in
+			the same CPU buffers as affected by MDS and TAA.
+			Therefore, similar to MDS and TAA, the mitigation
+			is to clear the affected CPU buffers.
+
+			This parameter controls the mitigation. The
+			options are:
+
+			full       - Enable mitigation on vulnerable CPUs
+
+			full,nosmt - Enable mitigation and disable SMT on
+				     vulnerable CPUs.
+
+			off        - Unconditionally disable mitigation
+
+			On MDS or TAA affected machines,
+			mmio_stale_data=off can be prevented by an active
+			MDS or TAA mitigation as these vulnerabilities are
+			mitigated with the same mechanism so in order to
+			disable this mitigation, you need to specify
+			mds=off and tsx_async_abort=off too.
+
+			Not specifying this option is equivalent to
+			mmio_stale_data=full.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.
@@ -3938,6 +4059,16 @@
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	proc_mem.force_override= [KNL]
+			Format: {always | ptrace | never}
+			Traditionally /proc/pid/mem allows memory permissions to be
+			overridden without restrictions. This option may be set to
+			restrict that. Can be one of:
+			- 'always': traditional behavior always allows mem overrides.
+			- 'ptrace': only allow mem overrides for active ptracers.
+			- 'never':  never allow mem overrides.
+			If not specified, default is the CONFIG_PROC_MEM_* choice.
+
 	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
@@ -4023,6 +4154,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	ras=option[,option,...]	[KNL] RAS-specific options
 
 		cec_disable	[X86]
@@ -4602,6 +4739,43 @@
 
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
+	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
+			Speculative Code Execution with Return Instructions)
+			vulnerability.
+
+			AMD-based UNRET and IBPB mitigations alone do not stop
+			sibling threads from influencing the predictions of other
+			sibling threads. For that reason, STIBP is used on pro-
+			cessors that support it, and mitigate SMT on processors
+			that don't.
+
+			off          - no mitigation
+			auto         - automatically select a migitation
+			auto,nosmt   - automatically select a mitigation,
+				       disabling SMT if necessary for
+				       the full mitigation (only on Zen1
+				       and older without STIBP).
+			ibpb         - On AMD, mitigate short speculation
+				       windows on basic block boundaries too.
+				       Safe, highest perf impact. It also
+				       enables STIBP if present. Not suitable
+				       on Intel.
+			ibpb,nosmt   - Like "ibpb" above but will disable SMT
+				       when STIBP is not available. This is
+				       the alternative for systems which do not
+				       have STIBP.
+			unret        - Force enable untrained return thunks,
+				       only effective on AMD f15h-f17h based
+				       systems.
+			unret,nosmt  - Like unret, but will disable SMT when STIBP
+				       is not available. This is the alternative for
+				       systems which do not have STIBP.
+
+			Selecting 'auto' will choose a mitigation method at run
+			time according to the CPU.
+
+			Not specifying this option is equivalent to retbleed=auto.
+
 	rfkill.default_state=
 		0	"airplane mode".  All wifi, bluetooth, wimax, gps, fm,
 			etc. communication is blocked by default.
@@ -4945,8 +5119,13 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - Enhanced/Auto IBRS
+			eibrs,retpoline   - Enhanced/Auto IBRS + Retpolines
+			eibrs,lfence      - Enhanced/Auto IBRS + LFENCE
+			ibrs		  - use IBRS to protect kernel
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -4993,6 +5172,17 @@
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
 
+	spec_rstack_overflow=
+			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+
+			off		- Disable mitigation
+			microcode	- Enable microcode mitigation only
+			safe-ret	- Enable sw-only safe RET mitigation (default)
+			ibpb		- Enable mitigation by issuing IBPB on
+					  kernel entry
+			ibpb-vmexit	- Issue IBPB only on VMEXIT
+					  (cloud-specific mitigation)
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@@ -5663,6 +5853,7 @@
 					device);
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
+				k = NO_SAME (do not use WRITE_SAME, uas only)
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
@@ -5964,6 +6155,10 @@
 			This option is obsoleted by the "nopv" option, which
 			has equivalent effect for XEN platform.
 
+	xen_no_vector_callback
+			[KNL,X86,XEN] Disable the vector callback for Xen
+			event channel interrupts.
+
 	xen_scrub_pages=	[XEN]
 			Boolean option to control scrubbing pages before giving them back
 			to Xen, for use by other domains. Can be also changed at runtime
@@ -5977,6 +6172,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
index 5c4432c96c4b..245739f55ac7 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -160,8 +160,8 @@ Under each memory block, you can see 5 files:
 
                     "online_movable", "online", "offline" command
                     which will be performed on all sections in the block.
-``phys_device``     read-only: designed to show the name of physical memory
-                    device.  This is not well implemented now.
+``phys_device``	    read-only: legacy interface only ever used on s390x to
+		    expose the covered storage increment.
 ``removable``       read-only: contains an integer value indicating
                     whether the memory block is removable or not
                     removable.  A value of 1 indicates that the memory
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/perf/arm-cmn.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
index 0e4809346014..796e25b7027b 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
@@ -17,7 +17,7 @@ PMU events
 ----------
 
 The PMU driver registers a single PMU device for the whole interconnect,
-see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link
+see /sys/bus/event_source/devices/arm_cmn_0. Multi-chip systems may link
 more than one CMN together via external CCIX links - in this situation,
 each mesh counts its own events entirely independently, and additional
 PMU devices will be named arm_cmn_{1..n}.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/pm/cpuidle.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/pm/cpuidle.rst
index 10fde58d0869..3596e3714ec1 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/pm/cpuidle.rst
@@ -685,8 +685,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
 by default this way, for example.
 
 The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
 
 The *x86* architecture support code recognizes three kernel command line
 options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
@@ -708,10 +708,13 @@ idle, so it very well may hurt single-thread computations performance as well as
 energy-efficiency.  Thus using it for performance reasons may not be a good idea
 at all.]
 
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
 
 In addition to the architecture-level kernel command line options affecting CPU
 idle time management, there are parameters affecting individual ``CPUIdle``
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/security-bugs.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/security-bugs.rst
index c32eb786201c..d6d93e96128e 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/security-bugs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/security-bugs.rst
@@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/sysctl/kernel.rst
index d4b32cc32bb7..6b0c7b650dea 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/sysctl/kernel.rst
@@ -663,6 +663,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -787,6 +796,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1005,28 +1015,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space
@@ -1457,10 +1461,31 @@ unprivileged_bpf_disabled
 =========================
 
 Writing 1 to this entry will disable unprivileged calls to ``bpf()``;
-once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return
-``-EPERM``.
+once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` or ``CAP_BPF``
+will return ``-EPERM``. Once set to 1, this can't be cleared from the
+running kernel anymore.
+
+Writing 2 to this entry will also disable unprivileged calls to ``bpf()``,
+however, an admin can still change this setting later on, if needed, by
+writing 0 or 1 to this entry.
+
+If ``BPF_UNPRIV_DEFAULT_OFF`` is enabled in the kernel config, then this
+entry will default to 2 instead of 0.
+
+= =============================================================
+0 Unprivileged calls to ``bpf()`` are enabled
+1 Unprivileged calls to ``bpf()`` are disabled without recovery
+2 Unprivileged calls to ``bpf()`` are disabled
+= =============================================================
+
+
+warn_limit
+==========
 
-Once set, this can't be cleared.
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
 
 
 watchdog
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/net.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/sysctl/net.rst
index f2ab8a5b6a4b..1ba6c0b9c161 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/sysctl/net.rst
@@ -31,17 +31,18 @@ see only some of them, depending on your kernel's configuration.
 
 Table : Subdirectories in /proc/sys/net
 
- ========= =================== = ========== ==================
+ ========= =================== = ========== ===================
  Directory Content               Directory  Content
- ========= =================== = ========== ==================
- core      General parameter     appletalk  Appletalk protocol
- unix      Unix domain sockets   netrom     NET/ROM
- 802       E802 protocol         ax25       AX25
- ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ========= =================== = ========== ===================
+ 802       E802 protocol         mptcp      Multipath TCP
+ appletalk Appletalk protocol    netfilter  Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose       X.25 PLP layer
+ core      General parameter     tipc       TIPC
+ ethernet  Ethernet protocol     unix       Unix domain sockets
  ipv4      IP version 4          x25        X.25 protocol
- bridge    Bridging              decnet     DEC net
- ipv6      IP version 6          tipc       TIPC
- ========= =================== = ========== ==================
+ ipv6      IP version 6
+ ========= =================== = ========== ===================
 
 1. /proc/sys/net/core - Network core options
 ============================================
@@ -271,7 +272,7 @@ poll cycle or the number of packets processed reaches netdev_budget.
 netdev_max_backlog
 ------------------
 
-Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
+Maximum number of packets, queued on the INPUT side, when the interface
 receives packets faster than kernel can process them.
 
 netdev_rss_key
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.10.233-gnu1/Documentation/admin-guide/sysctl/vm.rst
index f455fa00c00f..ac852f93f8da 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.10.233-gnu1/Documentation/admin-guide/sysctl/vm.rst
@@ -948,7 +948,7 @@ how much memory needs to be free before kswapd goes back to sleep.
 
 The unit is in fractions of 10,000. The default value of 10 means the
 distances between watermarks are 0.1% of the available memory in the
-node/system. The maximum value is 1000, or 10% of memory.
+node/system. The maximum value is 3000, or 30% of memory.
 
 A high rate of threads entering direct reclaim (allocstall) or kswapd
 going to sleep prematurely (kswapd_low_wmark_hit_quickly) can indicate
@@ -978,11 +978,11 @@ that benefit from having their data cached, zone_reclaim_mode should be
 left disabled as the caching effect is likely to be more important than
 data locality.
 
-zone_reclaim may be enabled if it's known that the workload is partitioned
-such that each partition fits within a NUMA node and that accessing remote
-memory would cause a measurable performance reduction.  The page allocator
-will then reclaim easily reusable pages (those page cache pages that are
-currently not used) before allocating off node pages.
+Consider enabling one or more zone_reclaim mode bits if it's known that the
+workload is partitioned such that each partition fits within a NUMA node
+and that accessing remote memory would cause a measurable performance
+reduction.  The page allocator will take additional actions before
+allocating off node pages.
 
 Allowing zone reclaim to write out pages stops processes that are
 writing large amounts of data from dirtying pages on other nodes. Zone
diff --git linux-libre-5.10-gnu1/Documentation/arm/memory.rst linux-libre-5.10.233-gnu1/Documentation/arm/memory.rst
index 0521b4ce5c96..34bb23c44a71 100644
--- linux-libre-5.10-gnu1/Documentation/arm/memory.rst
+++ linux-libre-5.10.233-gnu1/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000	fffeffff	DTCM mapping area for platforms with
 fffe0000	fffe7fff	ITCM mapping area for platforms with
 				ITCM mounted inside the CPU.
 
-ffc00000	ffefffff	Fixmap mapping region.  Addresses provided
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
 
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
 fee00000	feffffff	Mapping of PCI I/O space. This is a static
 				mapping within the vmalloc space.
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.10.233-gnu1/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..8aaa5d13d3cc 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.10.233-gnu1/Documentation/arm64/cpu-feature-registers.rst
@@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space.
 
 The infrastructure emulates only the following system register space::
 
-	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
 
 (See Table C5-6 'System instruction encodings for non-Debug System
 register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,59 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/elf_hwcaps.rst linux-libre-5.10.233-gnu1/Documentation/arm64/elf_hwcaps.rst
index bbd9cf54db6c..e88d245d426d 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.10.233-gnu1/Documentation/arm64/elf_hwcaps.rst
@@ -245,6 +245,18 @@ HWCAP2_MTE
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/silicon-errata.rst linux-libre-5.10.233-gnu1/Documentation/arm64/silicon-errata.rst
index 719510247292..9ee134914557 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.10.233-gnu1/Documentation/arm64/silicon-errata.rst
@@ -76,10 +76,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #1319537        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #1319367        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
@@ -90,14 +94,56 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #3456084        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N3     | #3456111        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
@@ -143,6 +189,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
+|                | Hip09 SMMU PMCG |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -160,6 +209,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-5.10-gnu1/Documentation/arm64/tagged-address-abi.rst linux-libre-5.10.233-gnu1/Documentation/arm64/tagged-address-abi.rst
index 4a9d9c794ee5..7d255249094d 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/tagged-address-abi.rst
+++ linux-libre-5.10.233-gnu1/Documentation/arm64/tagged-address-abi.rst
@@ -45,14 +45,24 @@ how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
-
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to
diff --git linux-libre-5.10-gnu1/Documentation/asm-annotations.rst linux-libre-5.10.233-gnu1/Documentation/asm-annotations.rst
index 32ea57483378..76424e0431f4 100644
--- linux-libre-5.10-gnu1/Documentation/asm-annotations.rst
+++ linux-libre-5.10.233-gnu1/Documentation/asm-annotations.rst
@@ -100,6 +100,11 @@ Instruction Macros
 ~~~~~~~~~~~~~~~~~~
 This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
 
+``objtool`` requires that all code must be contained in an ELF symbol. Symbol
+names that have a ``.L`` prefix do not emit symbol table entries. ``.L``
+prefixed symbols can be used within a code region, but should be avoided for
+denoting a range of code via ``SYM_*_START/END`` annotations.
+
 * ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
   most frequent markings**. They are used for functions with standard calling
   conventions -- global and local. Like in C, they both align the functions to
diff --git linux-libre-5.10-gnu1/Documentation/atomic_bitops.txt linux-libre-5.10.233-gnu1/Documentation/atomic_bitops.txt
index 093cdaefdb37..d8b101c97031 100644
--- linux-libre-5.10-gnu1/Documentation/atomic_bitops.txt
+++ linux-libre-5.10.233-gnu1/Documentation/atomic_bitops.txt
@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 
diff --git linux-libre-5.10-gnu1/Documentation/block/queue-sysfs.rst linux-libre-5.10.233-gnu1/Documentation/block/queue-sysfs.rst
index 2638d3446b79..c8bf8bc3c03a 100644
--- linux-libre-5.10-gnu1/Documentation/block/queue-sysfs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/block/queue-sysfs.rst
@@ -273,4 +273,11 @@ devices are described in the ZBC (Zoned Block Commands) and ZAC
 do not support zone commands, they will be treated as regular block devices
 and zoned will report "none".
 
+zone_write_granularity (RO)
+---------------------------
+This indicates the alignment constraint, in bytes, for write operations in
+sequential zones of zoned block devices (devices with a zoned attributed
+that reports "host-managed" or "host-aware"). This value is always 0 for
+regular block devices.
+
 Jens Axboe <jens.axboe@oracle.com>, February 2009
diff --git linux-libre-5.10-gnu1/Documentation/conf.py linux-libre-5.10.233-gnu1/Documentation/conf.py
index ed2b43ec7754..f47c3f1682db 100644
--- linux-libre-5.10-gnu1/Documentation/conf.py
+++ linux-libre-5.10.233-gnu1/Documentation/conf.py
@@ -176,7 +176,7 @@ finally:
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
diff --git linux-libre-5.10-gnu1/Documentation/core-api/kernel-api.rst linux-libre-5.10.233-gnu1/Documentation/core-api/kernel-api.rst
index 741aa37dc181..2a7444e3a4c2 100644
--- linux-libre-5.10-gnu1/Documentation/core-api/kernel-api.rst
+++ linux-libre-5.10.233-gnu1/Documentation/core-api/kernel-api.rst
@@ -24,11 +24,8 @@ String Conversions
 .. kernel-doc:: lib/vsprintf.c
    :export:
 
-.. kernel-doc:: include/linux/kernel.h
-   :functions: kstrtol
-
-.. kernel-doc:: include/linux/kernel.h
-   :functions: kstrtoul
+.. kernel-doc:: include/linux/kstrtox.h
+   :functions: kstrtol kstrtoul
 
 .. kernel-doc:: lib/kstrtox.c
    :export:
diff --git linux-libre-5.10-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-5.10.233-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst
index 4756f6b3a04e..10cdd990b63d 100644
--- linux-libre-5.10-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-5.10.233-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
index c97d4a580f47..42ec1d5fed38 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -123,8 +123,8 @@ properties:
           - const: qcom,msm8974
 
       - items:
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
index 767e86354c8e..2c6911c775c8 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -54,7 +54,7 @@ properties:
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
       - items:
-          - const: toradex,apalis_t30-eval-v1.1
+          - const: toradex,apalis_t30-v1.1-eval
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30-v1.1
           - const: toradex,apalis_t30
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
new file mode 100644
index 000000000000..bb2eec3021a0
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Analog Devices AXI clkgen pcore clock generator
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The axi_clkgen IP core is a software programmable clock generator,
+  that can be synthesized on various FPGA platforms.
+
+  Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-clkgen-2.00.a
+
+  clocks:
+    description:
+      Specifies the reference clock(s) from which the output frequency is
+      derived. This must either reference one clock if only the first clock
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff000000 {
+      compatible = "adi,axi-clkgen-2.00.a";
+      #clock-cells = <0>;
+      reg = <0xff000000 0x1000>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
+    };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/axi-clkgen.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/axi-clkgen.txt
deleted file mode 100644
index aca94fe9416f..000000000000
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/axi-clkgen.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Binding for the axi-clkgen clock generator
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
-- #clock-cells : from common clock binding; Should always be set to 0.
-- reg : Address and length of the axi-clkgen register set.
-- clocks : Phandle and clock specifier for the parent clock(s). This must
-	either reference one clock if only the first clock input is connected or two
-	if both clock inputs are connected. For the later case the clock connected
-	to the first input must be specified first.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-
-Example:
-	clock@ff000000 {
-		compatible = "adi,axi-clkgen";
-		#clock-cells = <0>;
-		reg = <0xff000000 0x1000>;
-		clocks = <&osc 1>;
-	};
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..005e0edd4609 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,16 +22,32 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
   '#clock-cells':
     const: 1
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 229af98b1d30..7cd88bc3a67d 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -16,8 +16,6 @@ description: |
   reads required input clock frequencies from the devicetree and acts as clock
   provider for all clock consumers of PS clocks.
 
-select: false
-
 properties:
   compatible:
     const: xlnx,versal-clk
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 0da42ab8fd3a..8a67bb889f18 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index a8d202c9d004..b8cb1b4dae1f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 0d1db3f9da84..02c21b584741 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -8,6 +8,8 @@ Optional properties:
 	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
+	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
+	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
 
 	HDMI audio properties:
 	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
@@ -54,6 +56,8 @@ Example:
 		compatible = "sil,sii9022";
 		reg = <0x39>;
 		reset-gpios = <&pioA 1 0>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
 
 		#sound-dai-cells = <0>;
 		sil,i2s-data-lanes = < 0 1 2 >;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index f8622bd0f61e..f0e0345da498 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..419c3b2ac5a6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -72,6 +72,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index 372679dbd216..7e250ce136ee 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -61,7 +61,7 @@ if:
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index b386e4128a79..d3e01d8c043c 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -22,7 +22,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 96c914e048f5..2015f50aed0f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -73,7 +73,7 @@ i2c0: i2c@f8034600 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 000000000000..baa65a521bad
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+      status = "okay";
+
+      ad74413r@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
index ad2fe660364b..c69cf8d0cb15 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -278,23 +278,35 @@ required:
   - interrupts
   - clocks
   - power-domains
-  - resets
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,vin-r8a7778
-          - renesas,vin-r8a7779
-          - renesas,rcar-gen2-vin
-then:
-  required:
-    - port
-else:
-  required:
-    - renesas,id
-    - ports
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,vin-r8a7778
+                - renesas,vin-r8a7779
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,vin-r8a7778
+              - renesas,vin-r8a7779
+              - renesas,rcar-gen2-vin
+    then:
+      required:
+        - port
+    else:
+      required:
+        - renesas,id
+        - ports
 
 additionalProperties: false
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 44919d48d241..c459f169a904 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -122,7 +122,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index b29050fd7470..6fe2a3d8ee6b 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -44,7 +44,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-mode:
         description:
@@ -174,6 +174,6 @@ examples:
         nand-ecc-mode = "soft";
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
     };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/btusb.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/btusb.txt
index b1ad6ee68e90..c51dd99dc0d3 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/btusb.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/btusb.txt
@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index fdf709817218..9e41dad9ef4d 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -49,7 +49,7 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   phy-connection-type:
@@ -206,6 +206,11 @@ properties:
                 Indicates that full-duplex is used. When absent, half
                 duplex is assumed.
 
+            pause:
+              $ref: /schemas/types.yaml#definitions/flag
+              description:
+                Indicates that pause should be enabled.
+
             asym-pause:
               $ref: /schemas/types.yaml#definitions/flag
               description:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 6dd72faebd89..a054accc20bd 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#definitions/flag
     description:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 244befb6402a..de9dd574a2f9 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -163,6 +163,7 @@ allOf:
             enum:
               - renesas,etheravb-r8a774a1
               - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a774e1
               - renesas,etheravb-r8a7795
               - renesas,etheravb-r8a7796
               - renesas,etheravb-r8a77961
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index ff317fd7c15b..2e1fcff3c280 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -14,9 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-ocotp
-      - fsl,imx28-ocotp
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
 
   "#address-cells":
     const: 1
@@ -40,7 +42,7 @@ additionalProperties: false
 examples:
   - |
     ocotp: efuse@8002c000 {
-        compatible = "fsl,imx28-ocotp";
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
         #address-cells = <1>;
         #size-cells = <1>;
         reg = <0x8002c000 0x2000>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
similarity index 85%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
index 399ebde45409..ff86c87309a4 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB2 PHY
@@ -13,8 +13,8 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb2-phy
-      - amlogic,meson-a1-usb2-phy
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -68,7 +68,7 @@ additionalProperties: false
 examples:
   - |
     phy@36000 {
-          compatible = "amlogic,meson-g12a-usb2-phy";
+          compatible = "amlogic,g12a-usb2-phy";
           reg = <0x36000 0x2000>;
           clocks = <&xtal>;
           clock-names = "xtal";
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 453c083cf44c..84738644e398 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -49,7 +49,7 @@ additionalProperties: false
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index c78ab7e2eee7..fa83c69820f8 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index 38dc56a57760..ecec514b3155 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index c2b0a8b6da1e..7cebd9ddfffd 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index efc0198eeb74..5444be7667b6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -24,9 +24,9 @@ allOf:
 select:
   properties:
     compatible:
-      items:
-        - enum:
-            - sifive,fu540-c000-ccache
+      contains:
+        enum:
+          - sifive,fu540-c000-ccache
 
   required:
     - compatible
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
index 8acd2de3de3a..d30dc045aac6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -63,6 +63,11 @@ properties:
     description:
       Enables wake up of host system on alarm.
 
+  reset-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RTC is able to reset the machine.
+
 additionalProperties: true
 
 ...
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
index c1d4c196f005..460cb546c54a 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
@@ -93,11 +93,6 @@ properties:
               - mediatek,mt7622-btif
               - mediatek,mt7623-btif
           - const: mediatek,mtk-btif
-      - items:
-          - enum:
-              - mediatek,mt7622-btif
-              - mediatek,mt7623-btif
-          - const: mediatek,mtk-btif
       - items:
           - const: mrvl,mmp-uart
           - const: intel,xscale-uart
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/renesas,scif.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index eda3d2c6bdd3..dbaa04380209 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -74,7 +74,7 @@ properties:
           - description: Error interrupt
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
-          - description: Transmit End interrupt
+          - description: Break interrupt
       - items:
           - description: Error interrupt
           - description: Receive buffer full interrupt
@@ -89,7 +89,7 @@ properties:
           - const: eri
           - const: rxi
           - const: txi
-          - const: tei
+          - const: bri
       - items:
           - const: eri
           - const: rxi
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/rs485.yaml
index 0c9fa694f85c..bc43670c69fa 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 1000
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 1000
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 06d5f251ec88..51f390e5c276 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -77,7 +77,8 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+additionalProperties:
+  type: object
 
 examples:
   - |
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index db61f0731a20..89e3819c6127 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -57,11 +57,11 @@ patternProperties:
           rate
 
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandle of the CPU DAI
 
     patternProperties:
-      "^codec-[0-9]+$":
+      "^codec(-[0-9]+)?$":
         type: object
         description: |-
           Codecs:
@@ -71,7 +71,7 @@ patternProperties:
 
         properties:
           sound-dai:
-            $ref: /schemas/types.yaml#/definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle-array
             description: phandle of the codec DAI
 
         required:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/mt6359.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/mt6359.yaml
index a54f466f769d..74330f54d6db 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/rt5645.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1f..c1fa379f5f3e 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/rt5645.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/tas2562.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/tas2562.yaml
index 27f7132ba2ef..6ccb346d4a4d 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -50,7 +50,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -67,7 +69,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/tas2764.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/tas2764.yaml
index 5bf8c76ecda1..1ffe1a01668f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/tas2764.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/tas2764.yaml
@@ -46,7 +46,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -63,7 +65,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/tas2770.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/tas2770.yaml
index 07e7f9951d2e..f3d0ca067bea 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -52,7 +52,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -69,7 +71,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index ef5698f426b2..392204a08e96 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -45,6 +45,7 @@ properties:
     maxItems: 2
 
   interconnect-names:
+    minItems: 1
     items:
       - const: qspi-config
       - const: qspi-memory
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 164f71598c59..af946e3da82a 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
@@ -199,12 +202,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/usb/cdns,usb3.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index d6af2794d444..703921e6bcaf 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -59,7 +59,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2735be1a8470..e04be09dd029 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -718,6 +718,8 @@ patternProperties:
     description: National Semiconductor
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..93cd77a6e92c 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-5.10.233-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420 and Exynos7).
 
 required:
   - compatible
@@ -58,6 +58,7 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
     then:
       required:
         - samsung,syscon-phandle
diff --git linux-libre-5.10-gnu1/Documentation/dontdiff linux-libre-5.10.233-gnu1/Documentation/dontdiff
index 2554abdc831a..7f99843386ce 100644
--- linux-libre-5.10-gnu1/Documentation/dontdiff
+++ linux-libre-5.10.233-gnu1/Documentation/dontdiff
@@ -178,6 +178,7 @@ mktables
 mktree
 mkutf8data
 modpost
+modules-only.symvers
 modules.builtin
 modules.builtin.modinfo
 modules.nsdeps
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
index 8a58c61932ff..61bdeac1bae5 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
@@ -69,17 +69,17 @@ early userspace image can be built by an unprivileged user.
 
 As a technical note, when directories and files are specified, the
 entire CONFIG_INITRAMFS_SOURCE is passed to
-usr/gen_initramfs_list.sh.  This means that CONFIG_INITRAMFS_SOURCE
+usr/gen_initramfs.sh.  This means that CONFIG_INITRAMFS_SOURCE
 can really be interpreted as any legal argument to
-gen_initramfs_list.sh.  If a directory is specified as an argument then
+gen_initramfs.sh.  If a directory is specified as an argument then
 the contents are scanned, uid/gid translation is performed, and
 usr/gen_init_cpio file directives are output.  If a directory is
-specified as an argument to usr/gen_initramfs_list.sh then the
+specified as an argument to usr/gen_initramfs.sh then the
 contents of the file are simply copied to the output.  All of the output
 directives from directory scanning and file contents copying are
 processed by usr/gen_init_cpio.
 
-See also 'usr/gen_initramfs_list.sh -h'.
+See also 'usr/gen_initramfs.sh -h'.
 
 Where's this all leading?
 =========================
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/firewire.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/firewire.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-bridge.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-bridge.rst
index 198aadafd3e7..8d650b4e2ce6 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-bridge.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -4,11 +4,11 @@ FPGA Bridge
 API to implement a new FPGA bridge
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-* struct fpga_bridge — The FPGA Bridge structure
-* struct fpga_bridge_ops — Low level Bridge driver ops
-* devm_fpga_bridge_create() — Allocate and init a bridge struct
-* fpga_bridge_register() — Register a bridge
-* fpga_bridge_unregister() — Unregister a bridge
+* struct fpga_bridge - The FPGA Bridge structure
+* struct fpga_bridge_ops - Low level Bridge driver ops
+* devm_fpga_bridge_create() - Allocate and init a bridge struct
+* fpga_bridge_register() - Register a bridge
+* fpga_bridge_unregister() - Unregister a bridge
 
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-mgr.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-mgr.rst
index 917ee22db429..4d926b452cb3 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-mgr.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -101,12 +101,12 @@ in state.
 API for implementing a new FPGA Manager driver
 ----------------------------------------------
 
-* ``fpga_mgr_states`` —  Values for :c:expr:`fpga_manager->state`.
-* struct fpga_manager —  the FPGA manager struct
-* struct fpga_manager_ops —  Low level FPGA manager driver ops
-* devm_fpga_mgr_create() —  Allocate and init a manager struct
-* fpga_mgr_register() —  Register an FPGA manager
-* fpga_mgr_unregister() —  Unregister an FPGA manager
+* ``fpga_mgr_states`` -  Values for :c:expr:`fpga_manager->state`.
+* struct fpga_manager -  the FPGA manager struct
+* struct fpga_manager_ops -  Low level FPGA manager driver ops
+* devm_fpga_mgr_create() -  Allocate and init a manager struct
+* fpga_mgr_register() -  Register an FPGA manager
+* fpga_mgr_unregister() -  Unregister an FPGA manager
 
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-programming.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-programming.rst
index 002392dab04f..fb4da4240e96 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-programming.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-programming.rst
@@ -84,10 +84,10 @@ will generate that list.  Here's some sample code of what to do next::
 API for programming an FPGA
 ---------------------------
 
-* fpga_region_program_fpga() —  Program an FPGA
-* fpga_image_info() —  Specifies what FPGA image to program
-* fpga_image_info_alloc() —  Allocate an FPGA image info struct
-* fpga_image_info_free() —  Free an FPGA image info struct
+* fpga_region_program_fpga() -  Program an FPGA
+* fpga_image_info() -  Specifies what FPGA image to program
+* fpga_image_info_alloc() -  Allocate an FPGA image info struct
+* fpga_image_info_free() -  Free an FPGA image info struct
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_program_fpga
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-region.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-region.rst
index 363a8171ab0a..2d03b5fb7657 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/fpga/fpga-region.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/fpga/fpga-region.rst
@@ -45,19 +45,25 @@ An example of usage can be seen in the probe function of [#f2]_.
 API to add a new FPGA region
 ----------------------------
 
-* struct fpga_region — The FPGA region struct
-* devm_fpga_region_create() — Allocate and init a region struct
-* fpga_region_register() —  Register an FPGA region
-* fpga_region_unregister() —  Unregister an FPGA region
+* struct fpga_region - The FPGA region struct
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
+  fpga_region_info structure to provide the full flexibility of options
+* __fpga_region_register() -  Create and register an FPGA region using standard
+  arguments
+* fpga_region_unregister() -  Unregister an FPGA region
+
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
 
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
 
-* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count
-* of_fpga_mgr_get() —  Get a reference to an FPGA manager, raise ref count,
+* fpga_mgr_get() - Get a reference to an FPGA manager, raise ref count
+* of_fpga_mgr_get() -  Get a reference to an FPGA manager, raise ref count,
   given a device node.
-* fpga_mgr_put() — Put an FPGA manager
+* fpga_mgr_put() - Put an FPGA manager
 
 The FPGA region will need to specify which bridges to control while programming
 the FPGA.  The region driver can build a list of bridges during probe time
@@ -66,20 +72,23 @@ the list of bridges to program just before programming
 (:c:expr:`fpga_region->get_bridges`).  The FPGA bridge framework supplies the
 following APIs to handle building or tearing down that list.
 
-* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
+* fpga_bridge_get_to_list() - Get a ref of an FPGA bridge, add it to a
   list
-* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
+* of_fpga_bridge_get_to_list() - Get a ref of an FPGA bridge, add it to a
   list, given a device node
-* fpga_bridges_put() — Given a list of bridges, put them
+* fpga_bridges_put() - Given a list of bridges, put them
 
 .. kernel-doc:: include/linux/fpga/fpga-region.h
    :functions: fpga_region
 
+.. kernel-doc:: include/linux/fpga/fpga-region.h
+   :functions: fpga_region_info
+
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: devm_fpga_region_create
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/ipmi.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/ipmi.rst
index bc281f10ce4b..0bfeeeeb17c8 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/ipmi.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/ipmi.rst
@@ -519,7 +519,7 @@ at module load time (for a module) with::
 	alerts_broken
 
 The addresses are normal I2C addresses.  The adapter is the string
-name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
+name of the adapter, as shown in /sys/bus/i2c/devices/i2c-<n>/name.
 It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
 spaces, so if the name is "This is an I2C chip" you can say
 adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/spi.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/spi.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/vfio.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/vfio.rst
index f1a4d3c3ba0b..d3a02300913a 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/vfio.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/vfio.rst
@@ -249,18 +249,23 @@ VFIO bus driver API
 
 VFIO bus drivers, such as vfio-pci make use of only a few interfaces
 into VFIO core.  When devices are bound and unbound to the driver,
-the driver should call vfio_add_group_dev() and vfio_del_group_dev()
-respectively::
-
-	extern int vfio_add_group_dev(struct device *dev,
-				      const struct vfio_device_ops *ops,
-				      void *device_data);
-
-	extern void *vfio_del_group_dev(struct device *dev);
-
-vfio_add_group_dev() indicates to the core to begin tracking the
-iommu_group of the specified dev and register the dev as owned by
-a VFIO bus driver.  The driver provides an ops structure for callbacks
+the driver should call vfio_register_group_dev() and
+vfio_unregister_group_dev() respectively::
+
+	void vfio_init_group_dev(struct vfio_device *device,
+				struct device *dev,
+				const struct vfio_device_ops *ops,
+				void *device_data);
+	int vfio_register_group_dev(struct vfio_device *device);
+	void vfio_unregister_group_dev(struct vfio_device *device);
+
+The driver should embed the vfio_device in its own structure and call
+vfio_init_group_dev() to pre-configure it before going to registration.
+vfio_register_group_dev() indicates to the core to begin tracking the
+iommu_group of the specified dev and register the dev as owned by a VFIO bus
+driver. Once vfio_register_group_dev() returns it is possible for userspace to
+start accessing the driver, thus the driver should ensure it is completely
+ready before calling it. The driver provides an ops structure for callbacks
 similar to a file operations structure::
 
 	struct vfio_device_ops {
@@ -276,7 +281,7 @@ similar to a file operations structure::
 	};
 
 Each function is passed the device_data that was originally registered
-in the vfio_add_group_dev() call above.  This allows the bus driver
+in the vfio_register_group_dev() call above.  This allows the bus driver
 an easy place to store its opaque, private data.  The open/release
 callbacks are issued when a new file descriptor is created for a
 device (via VFIO_GROUP_GET_DEVICE_FD).  The ioctl interface provides
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/xilinx/eemi.rst linux-libre-5.10.233-gnu1/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..c1bc47b9000d 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/xilinx/eemi.rst
+++ linux-libre-5.10.233-gnu1/Documentation/driver-api/xilinx/eemi.rst
@@ -16,35 +16,8 @@ components running across different processing clusters on a chip or
 device to communicate with a power management controller (PMC) on a
 device to issue or respond to power management requests.
 
-EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
-The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
-structure. Any driver who want to communicate with PMC using EEMI APIs
-can call zynqmp_pm_get_eemi_ops().
-
-Example of EEMI ops::
-
-	/* zynqmp-firmware driver maintain all EEMI APIs */
-	struct zynqmp_eemi_ops {
-		int (*get_api_version)(u32 *version);
-		int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
-	};
-
-	static const struct zynqmp_eemi_ops eemi_ops = {
-		.get_api_version = zynqmp_pm_get_api_version,
-		.query_data = zynqmp_pm_query_data,
-	};
-
-Example of EEMI ops usage::
-
-	static const struct zynqmp_eemi_ops *eemi_ops;
-	u32 ret_payload[PAYLOAD_ARG_CNT];
-	int ret;
-
-	eemi_ops = zynqmp_pm_get_eemi_ops();
-	if (IS_ERR(eemi_ops))
-		return PTR_ERR(eemi_ops);
-
-	ret = eemi_ops->query_data(qdata, ret_payload);
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
 
 IOCTL
 ------
diff --git linux-libre-5.10-gnu1/Documentation/fault-injection/fault-injection.rst linux-libre-5.10.233-gnu1/Documentation/fault-injection/fault-injection.rst
index 31ecfe44e5b4..47de5006f645 100644
--- linux-libre-5.10-gnu1/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-5.10.233-gnu1/Documentation/fault-injection/fault-injection.rst
@@ -78,8 +78,8 @@ configuration of fault-injection capabilities.
 
 - /sys/kernel/debug/fail*/times:
 
-	specifies how many times failures may happen at most.
-	A value of -1 means "no limit".
+	specifies how many times failures may happen at most. A value of -1
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -167,11 +167,13 @@ configuration of fault-injection capabilities.
 	- ERRNO: retval must be -1 to -MAX_ERRNO (-4096).
 	- ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096).
 
-- /sys/kernel/debug/fail_function/<functiuon-name>/retval:
+- /sys/kernel/debug/fail_function/<function-name>/retval:
 
-	specifies the "error" return value to inject to the given
-	function for given function. This will be created when
-	user specifies new injection entry.
+	specifies the "error" return value to inject to the given function.
+	This will be created when the user specifies a new injection entry.
+	Note that this file only accepts unsigned values. So, if you want to
+	use a negative errno, you better use 'printf' instead of 'echo', e.g.:
+	$ printf %#x -12 > retval
 
 Boot option
 ^^^^^^^^^^^
@@ -336,7 +338,7 @@ Application Examples
     FAILTYPE=fail_function
     FAILFUNC=open_ctree
     echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject
-    echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
+    printf %#x -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
diff --git linux-libre-5.10-gnu1/Documentation/fault-injection/provoke-crashes.rst linux-libre-5.10.233-gnu1/Documentation/fault-injection/provoke-crashes.rst
index a20ba5d93932..18de17354206 100644
--- linux-libre-5.10-gnu1/Documentation/fault-injection/provoke-crashes.rst
+++ linux-libre-5.10.233-gnu1/Documentation/fault-injection/provoke-crashes.rst
@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ,
 	IDE_CORE_CP, or DIRECT
 
 cpoint_type
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/autofs-mount-control.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/autofs-mount-control.rst
index bf4b511cdbe8..b5a379d25c40 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/autofs-mount-control.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/autofs-mount-control.rst
@@ -196,7 +196,7 @@ information and return operation results::
 		    struct args_ismountpoint	ismountpoint;
 	    };
 
-	    char path[0];
+	    char path[];
     };
 
 The ioctlfd field is a mount point file descriptor of an autofs mount
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/autofs.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/autofs.rst
index 681c6a492bc0..1b495768e7aa 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/autofs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/autofs.rst
@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 			struct args_ismountpoint	ismountpoint;
 		};
 
-                char path[0];
+                char path[];
         };
 
 For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/directory-locking.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/directory-locking.rst
index 504ba940c36c..193c22687851 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/directory-locking.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/directory-locking.rst
@@ -23,13 +23,15 @@ exclusive.
 locks victim and calls the method.  Locks are exclusive.
 
 4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
-NB: we might get away with locking the source (and target in exchange
-case) shared.
+the parent and finds source and target.  Then we decide which of the
+source and target need to be locked.  Source needs to be locked if it's a
+non-directory; target - if it's a non-directory or about to be removed.
+Take the locks that need to be taken, in inode pointer order if need
+to take both (that can happen only when both source and target are
+non-directories - the source because it wouldn't be locked otherwise
+and the target because mixing directory and non-directory is allowed
+only with RENAME_EXCHANGE, and that won't be removing the target).
+After the locks had been taken, call the method.  All locks are exclusive.
 
 5) link creation.  Locking rules:
 
@@ -44,19 +46,18 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock the parent of source first.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock subdirectories involved (source before target).
+	* Lock non-directories involved, in inode pointer order.
 	* call the method.
 
-All ->i_rwsem are taken exclusive.  Again, we might get away with locking
-the source (and target in exchange case) shared.
+All ->i_rwsem are taken exclusive.
 
 The rules above obviously guarantee that all directories that are going to be
 read, modified or removed by method will be locked by caller.
@@ -66,8 +67,10 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+[XXX: will be updated once we are done massaging the lock_rename()]
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/ext4/attributes.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/ext4/attributes.rst
index 54386a010a8d..871d2da7a0a9 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/ext4/attributes.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/ext4/attributes.rst
@@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/f2fs.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/f2fs.rst
index b8ee761c9922..de2bacc418fe 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/f2fs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/f2fs.rst
@@ -260,6 +260,14 @@ compress_extension=%s	 Support adding specified extension, so that f2fs can enab
 			 For other files, we can still enable compression via ioctl.
 			 Note that, there is one reserved special extension '*', it
 			 can be set to enable compression for all files.
+compress_chksum		 Support verifying chksum of raw data in compressed cluster.
+compress_mode=%s	 Control file compression mode. This supports "fs" and "user"
+			 modes. In "fs" mode (default), f2fs does automatic compression
+			 on the compression enabled files. In "user" mode, f2fs disables
+			 the automaic compression and gives the user discretion of
+			 choosing the target file and the timing. The user can do manual
+			 compression/decompression on the compression enabled files using
+			 ioctls.
 inlinecrypt		 When possible, encrypt/decrypt the contents of encrypted
 			 files using the blk-crypto framework rather than
 			 filesystem-layer encryption. This allows the use of
@@ -688,10 +696,10 @@ users.
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_NOT_SET
-                      HOT_NODE                 "
-                      WARM_NODE                "
-                      COLD_NODE                "
+N/A                   META                     WRITE_LIFE_NOT_SET
+N/A                   HOT_NODE                 "
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                "
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
@@ -717,10 +725,10 @@ WRITE_LIFE_LONG       "                        WRITE_LIFE_LONG
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_MEDIUM;
-                      HOT_NODE                 WRITE_LIFE_NOT_SET
-                      WARM_NODE                "
-                      COLD_NODE                WRITE_LIFE_NONE
+N/A                   META                     WRITE_LIFE_MEDIUM;
+N/A                   HOT_NODE                 WRITE_LIFE_NOT_SET
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                WRITE_LIFE_NONE
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
@@ -810,6 +818,34 @@ Compress metadata layout::
 	| data length | data chksum | reserved |      compressed data       |
 	+-------------+-------------+----------+----------------------------+
 
+Compression mode
+--------------------------
+
+f2fs supports "fs" and "user" compression modes with "compression_mode" mount option.
+With this option, f2fs provides a choice to select the way how to compress the
+compression enabled files (refer to "Compression implementation" section for how to
+enable compression on a regular inode).
+
+1) compress_mode=fs
+This is the default option. f2fs does automatic compression in the writeback of the
+compression enabled files.
+
+2) compress_mode=user
+This disables the automaic compression and gives the user discretion of choosing the
+target file and the timing. The user can do manual compression/decompression on the
+compression enabled files using F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
+ioctls like the below.
+
+To decompress a file,
+
+fd = open(filename, O_WRONLY, 0);
+ret = ioctl(fd, F2FS_IOC_DECOMPRESS_FILE);
+
+To compress a file,
+
+fd = open(filename, O_WRONLY, 0);
+ret = ioctl(fd, F2FS_IOC_COMPRESS_FILE);
+
 NVMe Zoned Namespace devices
 ----------------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/files.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/files.rst
index cbf8e57376bf..bcf84459917f 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/files.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/files.rst
@@ -62,7 +62,7 @@ the fdtable structure -
    be held.
 
 4. To look up the file structure given an fd, a reader
-   must use either fcheck() or fcheck_files() APIs. These
+   must use either lookup_fd_rcu() or files_lookup_fd_rcu() APIs. These
    take care of barrier requirements due to lock-free lookup.
 
    An example::
@@ -70,7 +70,7 @@ the fdtable structure -
 	struct file *file;
 
 	rcu_read_lock();
-	file = fcheck(fd);
+	file = lookup_fd_rcu(fd);
 	if (file) {
 		...
 	}
@@ -84,7 +84,7 @@ the fdtable structure -
    on ->f_count::
 
 	rcu_read_lock();
-	file = fcheck_files(files, fd);
+	file = files_lookup_fd_rcu(files, fd);
 	if (file) {
 		if (atomic_long_inc_not_zero(&file->f_count))
 			*fput_needed = 1;
@@ -104,7 +104,7 @@ the fdtable structure -
    lock-free, they must be installed using rcu_assign_pointer()
    API. If they are looked up lock-free, rcu_dereference()
    must be used. However it is advisable to use files_fdtable()
-   and fcheck()/fcheck_files() which take care of these issues.
+   and lookup_fd_rcu()/files_lookup_fd_rcu() which take care of these issues.
 
 7. While updating, the fdtable pointer must be looked up while
    holding files->file_lock. If ->file_lock is dropped, then
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/fscrypt.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/fscrypt.rst
index 44b67ebd6e40..936fae06db77 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/fscrypt.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
 
 Each encrypted directory tree is protected by a *master key*.  Master
 keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used.  For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits).  Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used.  For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes.  A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
 
 To "unlock" an encrypted directory tree, userspace must provide the
 appropriate master key.  There can be any number of master keys, each
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/locking.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/locking.rst
index c0f2c7586531..23a0d24168bc 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/locking.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/locking.rst
@@ -95,7 +95,7 @@ symlink:	exclusive
 mkdir:		exclusive
 unlink:		exclusive (both)
 rmdir:		exclusive (both)(see below)
-rename:		exclusive (all)	(see below)
+rename:		exclusive (both parents, some children)	(see below)
 readlink:	no
 get_link:	no
 setattr:	exclusive
@@ -113,6 +113,9 @@ tmpfile:	no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
 	exclusive on victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->unlink() and ->rename() have ->i_rwsem exclusive on all non-directories
+	involved.
+	->rename() has ->i_rwsem exclusive on any subdirectory that changes parent.
 
 See Documentation/filesystems/directory-locking.rst for more detailed discussion
 of the locking scheme for directory operations.
@@ -430,17 +433,21 @@ prototypes::
 	void (*lm_break)(struct file_lock *); /* break_lease callback */
 	int (*lm_change)(struct file_lock **, int);
 	bool (*lm_breaker_owns_lease)(struct file_lock *);
+        bool (*lm_lock_expirable)(struct file_lock *);
+        void (*lm_expire_lock)(void);
 
 locking rules:
 
 ======================	=============	=================	=========
-ops			inode->i_lock	blocked_lock_lock	may block
+ops			   flc_lock  	blocked_lock_lock	may block
 ======================	=============	=================	=========
-lm_notify:		yes		yes			no
+lm_notify:		no      	yes			no
 lm_grant:		no		no			no
 lm_break:		yes		no			no
 lm_change		yes		no			no
-lm_breaker_owns_lease:	no		no			no
+lm_breaker_owns_lease:	yes     	no			no
+lm_lock_expirable	yes		no			no
+lm_expire_lock		no		no			yes
 ======================	=============	=================	=========
 
 buffer_head
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/mount_api.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/mount_api.rst
index d7f53d62b5bb..8fb03f57546d 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/mount_api.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/mount_api.rst
@@ -778,7 +778,8 @@ process the parameters it is given.
 
    * ::
 
-       bool fs_validate_description(const struct fs_parameter_description *desc);
+       bool fs_validate_description(const char *name,
+                                    const struct fs_parameter_description *desc);
 
      This performs some validation checks on a parameter description.  It
      returns true if the description is good and false if it is not.  It will
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/nfs/exporting.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/nfs/exporting.rst
index 33d588a01ace..6f59a364f84c 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/nfs/exporting.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/nfs/exporting.rst
@@ -154,6 +154,11 @@ struct which has the following members:
     to find potential names, and matches inode numbers to find the correct
     match.
 
+  flags
+    Some filesystems may need to be handled differently than others. The
+    export_operations struct also includes a flags field that allows the
+    filesystem to communicate such information to nfsd. See the Export
+    Operations Flags section below for more explanation.
 
 A filehandle fragment consists of an array of 1 or more 4byte words,
 together with a one byte "type".
@@ -163,3 +168,76 @@ generated by encode_fh, in which case it will have been padded with
 nuls.  Rather, the encode_fh routine should choose a "type" which
 indicates the decode_fh how much of the filehandle is valid, and how
 it should be interpreted.
+
+Export Operations Flags
+-----------------------
+In addition to the operation vector pointers, struct export_operations also
+contains a "flags" field that allows the filesystem to communicate to nfsd
+that it may want to do things differently when dealing with it. The
+following flags are defined:
+
+  EXPORT_OP_NOWCC - disable NFSv3 WCC attributes on this filesystem
+    RFC 1813 recommends that servers always send weak cache consistency
+    (WCC) data to the client after each operation. The server should
+    atomically collect attributes about the inode, do an operation on it,
+    and then collect the attributes afterward. This allows the client to
+    skip issuing GETATTRs in some situations but means that the server
+    is calling vfs_getattr for almost all RPCs. On some filesystems
+    (particularly those that are clustered or networked) this is expensive
+    and atomicity is difficult to guarantee. This flag indicates to nfsd
+    that it should skip providing WCC attributes to the client in NFSv3
+    replies when doing operations on this filesystem. Consider enabling
+    this on filesystems that have an expensive ->getattr inode operation,
+    or when atomicity between pre and post operation attribute collection
+    is impossible to guarantee.
+
+  EXPORT_OP_NOSUBTREECHK - disallow subtree checking on this fs
+    Many NFS operations deal with filehandles, which the server must then
+    vet to ensure that they live inside of an exported tree. When the
+    export consists of an entire filesystem, this is trivial. nfsd can just
+    ensure that the filehandle live on the filesystem. When only part of a
+    filesystem is exported however, then nfsd must walk the ancestors of the
+    inode to ensure that it's within an exported subtree. This is an
+    expensive operation and not all filesystems can support it properly.
+    This flag exempts the filesystem from subtree checking and causes
+    exportfs to get back an error if it tries to enable subtree checking
+    on it.
+
+  EXPORT_OP_CLOSE_BEFORE_UNLINK - always close cached files before unlinking
+    On some exportable filesystems (such as NFS) unlinking a file that
+    is still open can cause a fair bit of extra work. For instance,
+    the NFS client will do a "sillyrename" to ensure that the file
+    sticks around while it's still open. When reexporting, that open
+    file is held by nfsd so we usually end up doing a sillyrename, and
+    then immediately deleting the sillyrenamed file just afterward when
+    the link count actually goes to zero. Sometimes this delete can race
+    with other operations (for instance an rmdir of the parent directory).
+    This flag causes nfsd to close any open files for this inode _before_
+    calling into the vfs to do an unlink or a rename that would replace
+    an existing file.
+
+  EXPORT_OP_REMOTE_FS - Backing storage for this filesystem is remote
+    PF_LOCAL_THROTTLE exists for loopback NFSD, where a thread needs to
+    write to one bdi (the final bdi) in order to free up writes queued
+    to another bdi (the client bdi). Such threads get a private balance
+    of dirty pages so that dirty pages for the client bdi do not imact
+    the daemon writing to the final bdi. For filesystems whose durable
+    storage is not local (such as exported NFS filesystems), this
+    constraint has negative consequences. EXPORT_OP_REMOTE_FS enables
+    an export to disable writeback throttling.
+
+  EXPORT_OP_NOATOMIC_ATTR - Filesystem does not update attributes atomically
+    EXPORT_OP_NOATOMIC_ATTR indicates that the exported filesystem
+    cannot provide the semantics required by the "atomic" boolean in
+    NFSv4's change_info4. This boolean indicates to a client whether the
+    returned before and after change attributes were obtained atomically
+    with the respect to the requested metadata operation (UNLINK,
+    OPEN/CREATE, MKDIR, etc).
+
+  EXPORT_OP_FLUSH_ON_CLOSE - Filesystem flushes file data on close(2)
+    On most filesystems, inodes can remain under writeback after the
+    file is closed. NFSD relies on client activity or local flusher
+    threads to handle writeback. Certain filesystems, such as NFS, flush
+    all of an inode's dirty data on last close. Exports that behave this
+    way should set EXPORT_OP_FLUSH_ON_CLOSE so that NFSD knows to skip
+    waiting for writeback when closing such files.
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/overlayfs.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/overlayfs.rst
index 580ab9a0fe31..137afeb3f581 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/overlayfs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/overlayfs.rst
@@ -575,6 +575,14 @@ without significant effort.
 The advantage of mounting with the "volatile" option is that all forms of
 sync calls to the upper filesystem are omitted.
 
+In order to avoid a giving a false sense of safety, the syncfs (and fsync)
+semantics of volatile mounts are slightly different than that of the rest of
+VFS.  If any writeback error occurs on the upperdir's filesystem after a
+volatile mount takes place, all sync functions will return an error.  Once this
+condition is reached, the filesystem will not recover, and every subsequent sync
+call will return an error, even if the upperdir has not experience a new error
+since the last sync call.
+
 When overlay is mounted with "volatile" option, the directory
 "$workdir/work/incompat/volatile" is created.  During next mount, overlay
 checks for this directory and refuses to mount if present. This is a strong
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/porting.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/porting.rst
index 867036aa90b8..0a2d29d84419 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/porting.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/porting.rst
@@ -865,3 +865,21 @@ no matter what.  Everything is handled by the caller.
 
 clone_private_mount() returns a longterm mount now, so the proper destructor of
 its result is kern_unmount() or kern_unmount_array().
+
+---
+
+**mandatory**
+
+If ->rename() update of .. on cross-directory move needs an exclusion with
+directory modifications, do *not* lock the subdirectory in question in your
+->rename() - it's done by the caller now [that item should've been added in
+28eceeda130f "fs: Lock moved directories"].
+
+---
+
+**mandatory**
+
+On same-directory ->rename() the (tautological) update of .. is not protected
+by any locks; just don't do it if the old parent is the same as the new one.
+We really can't lock two subdirectories in same-directory rename - not without
+deadlocks.
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
index 4598b0d90b60..164960631925 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
@@ -170,7 +170,7 @@ Documentation/driver-api/early-userspace/early_userspace_support.rst for more de
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
 creates a configuration file from that directory (usr/Makefile calls
-usr/gen_initramfs_list.sh), and proceeds to package up that directory
+usr/gen_initramfs.sh), and proceeds to package up that directory
 using the config file (by feeding it to usr/gen_init_cpio, which is created
 from usr/gen_init_cpio.c).  The kernel's build-time cpio creation code is
 entirely self-contained, and the kernel's boot-time extractor is also
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/seq_file.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/seq_file.rst
index 56856481dc8d..a6726082a7c2 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/seq_file.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/seq_file.rst
@@ -217,6 +217,12 @@ between the calls to start() and stop(), so holding a lock during that time
 is a reasonable thing to do. The seq_file code will also avoid taking any
 other locks while the iterator is active.
 
+The iterater value returned by start() or next() is guaranteed to be
+passed to a subsequent next() or stop() call.  This allows resources
+such as locks that were taken to be reliably released.  There is *no*
+guarantee that the iterator will be passed to show(), though in practice
+it often will be.
+
 
 Formatted output
 ================
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/vfs.rst linux-libre-5.10.233-gnu1/Documentation/filesystems/vfs.rst
index ca52c82e5bb5..f7b69a0e71e1 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/vfs.rst
+++ linux-libre-5.10.233-gnu1/Documentation/filesystems/vfs.rst
@@ -1188,7 +1188,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst linux-libre-5.10.233-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
index e588bccf5158..344284236a81 100644
--- linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
+++ linux-libre-5.10.233-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -168,7 +168,7 @@ An error injection example::
   0x00000008	Memory Correctable
   0x00000010	Memory Uncorrectable non-fatal
   # echo 0x12345000 > param1		# Set memory address for injection
-  # echo $((-1 << 12)) > param2		# Mask 0xfffffffffffff000 - anywhere in this page
+  # echo 0xfffffffffffff000 > param2		# Mask - anywhere in this page
   # echo 0x8 > error_type			# Choose correctable memory error
   # echo 1 > error_inject			# Inject now
 
diff --git linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.10.233-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 9b17dc77d18c..da0e46496fc4 100644
--- linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.10.233-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.10-gnu1/Documentation/gpu/todo.rst linux-libre-5.10.233-gnu1/Documentation/gpu/todo.rst
index b0ea17da8ff6..28841609aa4f 100644
--- linux-libre-5.10-gnu1/Documentation/gpu/todo.rst
+++ linux-libre-5.10.233-gnu1/Documentation/gpu/todo.rst
@@ -542,6 +542,27 @@ Some of these date from the very introduction of KMS in 2008 ...
 
 Level: Intermediate
 
+Remove automatic page mapping from dma-buf importing
+----------------------------------------------------
+
+When importing dma-bufs, the dma-buf and PRIME frameworks automatically map
+imported pages into the importer's DMA area. drm_gem_prime_fd_to_handle() and
+drm_gem_prime_handle_to_fd() require that importers call dma_buf_attach()
+even if they never do actual device DMA, but only CPU access through
+dma_buf_vmap(). This is a problem for USB devices, which do not support DMA
+operations.
+
+To fix the issue, automatic page mappings should be removed from the
+buffer-sharing code. Fixing this is a bit more involved, since the import/export
+cache is also tied to &drm_gem_object.import_attach. Meanwhile we paper over
+this problem for USB devices by fishing out the USB host controller device, as
+long as that supports DMA. Otherwise importing can still needlessly fail.
+
+Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter
+
+Level: Advanced
+
+
 Better Testing
 ==============
 
diff --git linux-libre-5.10-gnu1/Documentation/hwmon/lm90.rst linux-libre-5.10.233-gnu1/Documentation/hwmon/lm90.rst
index 3da8c6e06a36..05391fb4042d 100644
--- linux-libre-5.10-gnu1/Documentation/hwmon/lm90.rst
+++ linux-libre-5.10.233-gnu1/Documentation/hwmon/lm90.rst
@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
diff --git linux-libre-5.10-gnu1/Documentation/hwmon/max31790.rst linux-libre-5.10.233-gnu1/Documentation/hwmon/max31790.rst
index f301385d8cef..7b097c3b9b90 100644
--- linux-libre-5.10-gnu1/Documentation/hwmon/max31790.rst
+++ linux-libre-5.10.233-gnu1/Documentation/hwmon/max31790.rst
@@ -38,6 +38,7 @@ Sysfs entries
 fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
-pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
-pwm[1-6]           RW  fan target duty cycle (0-255)
+pwm[1-6]_enable    RW  regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  read: current pwm duty cycle,
+                       write: target pwm duty cycle (0-255)
 ================== === =======================================================
diff --git linux-libre-5.10-gnu1/Documentation/input/joydev/joystick.rst linux-libre-5.10.233-gnu1/Documentation/input/joydev/joystick.rst
index 9746fd76cc58..f38c330c028e 100644
--- linux-libre-5.10-gnu1/Documentation/input/joydev/joystick.rst
+++ linux-libre-5.10.233-gnu1/Documentation/input/joydev/joystick.rst
@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
 * AVB Mag Turbo Force
 * AVB Top Shot Pegasus
 * AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
 * Logitech WingMan Force
 * Logitech WingMan Force Wheel
 * Guillemot Race Leader Force Feedback
diff --git linux-libre-5.10-gnu1/Documentation/kbuild/gcc-plugins.rst linux-libre-5.10.233-gnu1/Documentation/kbuild/gcc-plugins.rst
index 4b1c10f88e30..3349966f213d 100644
--- linux-libre-5.10-gnu1/Documentation/kbuild/gcc-plugins.rst
+++ linux-libre-5.10.233-gnu1/Documentation/kbuild/gcc-plugins.rst
@@ -11,16 +11,13 @@ compiler [1]_. They are useful for runtime instrumentation and static analysis.
 We can analyse, change and add further code during compilation via
 callbacks [2]_, GIMPLE [3]_, IPA [4]_ and RTL passes [5]_.
 
-The GCC plugin infrastructure of the kernel supports all gcc versions from
-4.5 to 6.0, building out-of-tree modules, cross-compilation and building in a
-separate directory.
-Plugin source files have to be compilable by both a C and a C++ compiler as well
-because gcc versions 4.5 and 4.6 are compiled by a C compiler,
-gcc-4.7 can be compiled by a C or a C++ compiler,
-and versions 4.8+ can only be compiled by a C++ compiler.
+The GCC plugin infrastructure of the kernel supports building out-of-tree
+modules, cross-compilation and building in a separate directory.
+Plugin source files have to be compilable by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
-powerpc architectures.
+Currently the GCC plugin infrastructure supports only some architectures.
+Grep "select HAVE_GCC_PLUGINS" to find out which architectures support
+GCC plugins.
 
 This infrastructure was ported from grsecurity [6]_ and PaX [7]_.
 
@@ -47,20 +44,13 @@ Files
 	This is a compatibility header for GCC plugins.
 	It should be always included instead of individual gcc headers.
 
-**$(src)/scripts/gcc-plugin.sh**
-
-	This script checks the availability of the included headers in
-	gcc-common.h and chooses the proper host compiler to build the plugins
-	(gcc-4.7 can be built by either gcc or g++).
-
 **$(src)/scripts/gcc-plugins/gcc-generate-gimple-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-ipa-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-simple_ipa-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-rtl-pass.h**
 
 	These headers automatically generate the registration structures for
-	GIMPLE, SIMPLE_IPA, IPA and RTL passes. They support all gcc versions
-	from 4.5 to 6.0.
+	GIMPLE, SIMPLE_IPA, IPA and RTL passes.
 	They should be preferred to creating the structures by hand.
 
 
@@ -68,21 +58,25 @@ Usage
 =====
 
 You must install the gcc plugin headers for your gcc version,
-e.g., on Ubuntu for gcc-4.9::
+e.g., on Ubuntu for gcc-10::
 
-	apt-get install gcc-4.9-plugin-dev
+	apt-get install gcc-10-plugin-dev
 
 Or on Fedora::
 
 	dnf install gcc-plugin-devel
 
-Enable a GCC plugin based feature in the kernel config::
+Enable the GCC plugin infrastructure and some plugin(s) you want to use
+in the kernel config::
 
-	CONFIG_GCC_PLUGIN_CYC_COMPLEXITY = y
+	CONFIG_GCC_PLUGINS=y
+	CONFIG_GCC_PLUGIN_CYC_COMPLEXITY=y
+	CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
+	...
 
-To compile only the plugin(s)::
+To compile the minimum tool set including the plugin(s)::
 
-	make gcc-plugins
+	make scripts
 
 or just run the kernel make and compile the whole kernel with
 the cyclomatic complexity GCC plugin.
@@ -91,7 +85,8 @@ the cyclomatic complexity GCC plugin.
 4. How to add a new GCC plugin
 ==============================
 
-The GCC plugins are in $(src)/scripts/gcc-plugins/. You can use a file or a directory
-here. It must be added to $(src)/scripts/gcc-plugins/Makefile,
-$(src)/scripts/Makefile.gcc-plugins and $(src)/arch/Kconfig.
+The GCC plugins are in scripts/gcc-plugins/. You need to put plugin source files
+right under scripts/gcc-plugins/. Creating subdirectories is not supported.
+It must be added to scripts/gcc-plugins/Makefile, scripts/Makefile.gcc-plugins
+and a relevant Kconfig file.
 See the cyc_complexity_plugin.c (CONFIG_GCC_PLUGIN_CYC_COMPLEXITY) GCC plugin.
diff --git linux-libre-5.10-gnu1/Documentation/kernel-hacking/locking.rst linux-libre-5.10.233-gnu1/Documentation/kernel-hacking/locking.rst
index 6ed806e6061b..a6d89efede79 100644
--- linux-libre-5.10-gnu1/Documentation/kernel-hacking/locking.rst
+++ linux-libre-5.10.233-gnu1/Documentation/kernel-hacking/locking.rst
@@ -1358,7 +1358,7 @@ Mutex API reference
 Futex API reference
 ===================
 
-.. kernel-doc:: kernel/futex.c
+.. kernel-doc:: kernel/futex/core.c
    :internal:
 
 Further reading
diff --git linux-libre-5.10-gnu1/Documentation/locking/hwspinlock.rst linux-libre-5.10.233-gnu1/Documentation/locking/hwspinlock.rst
index 6f03713b7003..2ffaa3cbd63f 100644
--- linux-libre-5.10-gnu1/Documentation/locking/hwspinlock.rst
+++ linux-libre-5.10.233-gnu1/Documentation/locking/hwspinlock.rst
@@ -85,6 +85,17 @@ is already free).
 
 Should be called from a process context (might sleep).
 
+::
+
+  int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id);
+
+After verifying the owner of the hwspinlock, release a previously acquired
+hwspinlock; returns 0 on success, or an appropriate error code on failure
+(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific
+hwspinlock).
+
+Should be called from a process context (might sleep).
+
 ::
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
diff --git linux-libre-5.10-gnu1/Documentation/locking/locktypes.rst linux-libre-5.10.233-gnu1/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- linux-libre-5.10-gnu1/Documentation/locking/locktypes.rst
+++ linux-libre-5.10.233-gnu1/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git linux-libre-5.10-gnu1/Documentation/locking/seqlock.rst linux-libre-5.10.233-gnu1/Documentation/locking/seqlock.rst
index a334b584f2b3..64405e5da63e 100644
--- linux-libre-5.10-gnu1/Documentation/locking/seqlock.rst
+++ linux-libre-5.10.233-gnu1/Documentation/locking/seqlock.rst
@@ -89,7 +89,7 @@ Read path::
 
 .. _seqcount_locktype_t:
 
-Sequence counters with associated locks (``seqcount_LOCKTYPE_t``)
+Sequence counters with associated locks (``seqcount_LOCKNAME_t``)
 -----------------------------------------------------------------
 
 As discussed at :ref:`seqcount_t`, sequence count write side critical
@@ -115,27 +115,26 @@ The following sequence counters with associated locks are defined:
   - ``seqcount_mutex_t``
   - ``seqcount_ww_mutex_t``
 
-The plain seqcount read and write APIs branch out to the specific
-seqcount_LOCKTYPE_t implementation at compile-time. This avoids kernel
-API explosion per each new seqcount LOCKTYPE.
+The sequence counter read and write APIs can take either a plain
+seqcount_t or any of the seqcount_LOCKNAME_t variants above.
 
-Initialization (replace "LOCKTYPE" with one of the supported locks)::
+Initialization (replace "LOCKNAME" with one of the supported locks)::
 
 	/* dynamic */
-	seqcount_LOCKTYPE_t foo_seqcount;
-	seqcount_LOCKTYPE_init(&foo_seqcount, &lock);
+	seqcount_LOCKNAME_t foo_seqcount;
+	seqcount_LOCKNAME_init(&foo_seqcount, &lock);
 
 	/* static */
-	static seqcount_LOCKTYPE_t foo_seqcount =
-		SEQCNT_LOCKTYPE_ZERO(foo_seqcount, &lock);
+	static seqcount_LOCKNAME_t foo_seqcount =
+		SEQCNT_LOCKNAME_ZERO(foo_seqcount, &lock);
 
 	/* C99 struct init */
 	struct {
-		.seq   = SEQCNT_LOCKTYPE_ZERO(foo.seq, &lock),
+		.seq   = SEQCNT_LOCKNAME_ZERO(foo.seq, &lock),
 	} foo;
 
 Write path: same as in :ref:`seqcount_t`, while running from a context
-with the associated LOCKTYPE lock acquired.
+with the associated write serialization lock acquired.
 
 Read path: same as in :ref:`seqcount_t`.
 
diff --git linux-libre-5.10-gnu1/Documentation/networking/af_xdp.rst linux-libre-5.10.233-gnu1/Documentation/networking/af_xdp.rst
index 2ccc5644cc98..70623cb135d3 100644
--- linux-libre-5.10-gnu1/Documentation/networking/af_xdp.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/af_xdp.rst
@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
 application to use. The final option is the flags field, but it will
 be dealt with in separate sections for each UMEM flag.
 
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
 XDP_STATISTICS getsockopt
 -------------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/networking/bonding.rst linux-libre-5.10.233-gnu1/Documentation/networking/bonding.rst
index adc314639085..413dca513e1d 100644
--- linux-libre-5.10-gnu1/Documentation/networking/bonding.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-5.10-gnu1/Documentation/networking/decnet.rst linux-libre-5.10.233-gnu1/Documentation/networking/decnet.rst
deleted file mode 100644
index b8bc11ff8370..000000000000
--- linux-libre-5.10-gnu1/Documentation/networking/decnet.rst
+++ /dev/null
@@ -1,243 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=========================================
-Linux DECnet Networking Layer Information
-=========================================
-
-1. Other documentation....
-==========================
-
-   - Project Home Pages
-     - http://www.chygwyn.com/				   - Kernel info
-     - http://linux-decnet.sourceforge.net/                - Userland tools
-     - http://www.sourceforge.net/projects/linux-decnet/   - Status page
-
-2. Configuring the kernel
-=========================
-
-Be sure to turn on the following options:
-
-    - CONFIG_DECNET (obviously)
-    - CONFIG_PROC_FS (to see what's going on)
-    - CONFIG_SYSCTL (for easy configuration)
-
-if you want to try out router support (not properly debugged yet)
-you'll need the following options as well...
-
-    - CONFIG_DECNET_ROUTER (to be able to add/delete routes)
-    - CONFIG_NETFILTER (will be required for the DECnet routing daemon)
-
-Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
-that you need it, in general you won't and it can cause ifconfig to
-malfunction.
-
-Run time configuration has changed slightly from the 2.4 system. If you
-want to configure an endnode, then the simplified procedure is as follows:
-
- - Set the MAC address on your ethernet card before starting _any_ other
-   network protocols.
-
-As soon as your network card is brought into the UP state, DECnet should
-start working. If you need something more complicated or are unsure how
-to set the MAC address, see the next section. Also all configurations which
-worked with 2.4 will work under 2.5 with no change.
-
-3. Command line options
-=======================
-
-You can set a DECnet address on the kernel command line for compatibility
-with the 2.4 configuration procedure, but in general it's not needed any more.
-If you do st a DECnet address on the command line, it has only one purpose
-which is that its added to the addresses on the loopback device.
-
-With 2.4 kernels, DECnet would only recognise addresses as local if they
-were added to the loopback device. In 2.5, any local interface address
-can be used to loop back to the local machine. Of course this does not
-prevent you adding further addresses to the loopback device if you
-want to.
-
-N.B. Since the address list of an interface determines the addresses for
-which "hello" messages are sent, if you don't set an address on the loopback
-interface then you won't see any entries in /proc/net/neigh for the local
-host until such time as you start a connection. This doesn't affect the
-operation of the local communications in any other way though.
-
-The kernel command line takes options looking like the following::
-
-    decnet.addr=1,2
-
-the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
-and early 2.3.xx kernels, you must use a comma when specifying the
-DECnet address like this. For more recent 2.3.xx kernels, you may
-use almost any character except space, although a `.` would be the most
-obvious choice :-)
-
-There used to be a third number specifying the node type. This option
-has gone away in favour of a per interface node type. This is now set
-using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
-set with a single digit, 0=EndNode, 1=L1 Router and  2=L2 Router.
-
-There are also equivalent options for modules. The node address can
-also be set through the /proc/sys/net/decnet/ files, as can other system
-parameters.
-
-Currently the only supported devices are ethernet and ip_gre. The
-ethernet address of your ethernet card has to be set according to the DECnet
-address of the node in order for it to be autoconfigured (and then appear in
-/proc/net/decnet_dev). There is a utility available at the above
-FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before or
-at the time the device is brought up. If you are using RedHat you can
-add the line::
-
-    MACADDR=AA:00:04:00:03:04
-
-or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or
-wherever your network card's configuration lives. Setting the MAC address
-of your ethernet card to an address starting with "hi-ord" will cause a
-DECnet address which matches to be added to the interface (which you can
-verify with iproute2).
-
-The default device for routing can be set through the /proc filesystem
-by setting /proc/sys/net/decnet/default_device to the
-device you want DECnet to route packets out of when no specific route
-is available. Usually this will be eth0, for example::
-
-    echo -n "eth0" >/proc/sys/net/decnet/default_device
-
-If you don't set the default device, then it will default to the first
-ethernet card which has been autoconfigured as described above. You can
-confirm that by looking in the default_device file of course.
-
-There is a list of what the other files under /proc/sys/net/decnet/ do
-on the kernel patch web site (shown above).
-
-4. Run time kernel configuration
-================================
-
-
-This is either done through the sysctl/proc interface (see the kernel web
-pages for details on what the various options do) or through the iproute2
-package in the same way as IPv4/6 configuration is performed.
-
-Documentation for iproute2 is included with the package, although there is
-as yet no specific section on DECnet, most of the features apply to both
-IP and DECnet, albeit with DECnet addresses instead of IP addresses and
-a reduced functionality.
-
-If you want to configure a DECnet router you'll need the iproute2 package
-since its the _only_ way to add and delete routes currently. Eventually
-there will be a routing daemon to send and receive routing messages for
-each interface and update the kernel routing tables accordingly. The
-routing daemon will use netfilter to listen to routing packets, and
-rtnetlink to update the kernels routing tables.
-
-The DECnet raw socket layer has been removed since it was there purely
-for use by the routing daemon which will now use netfilter (a much cleaner
-and more generic solution) instead.
-
-5. How can I tell if its working?
-=================================
-
-Here is a quick guide of what to look for in order to know if your DECnet
-kernel subsystem is working.
-
-   - Is the node address set (see /proc/sys/net/decnet/node_address)
-   - Is the node of the correct type
-     (see /proc/sys/net/decnet/conf/<dev>/forwarding)
-   - Is the Ethernet MAC address of each Ethernet card set to match
-     the DECnet address. If in doubt use the dn2ethaddr utility available
-     at the ftp archive.
-   - If the previous two steps are satisfied, and the Ethernet card is up,
-     you should find that it is listed in /proc/net/decnet_dev and also
-     that it appears as a directory in /proc/sys/net/decnet/conf/. The
-     loopback device (lo) should also appear and is required to communicate
-     within a node.
-   - If you have any DECnet routers on your network, they should appear
-     in /proc/net/decnet_neigh, otherwise this file will only contain the
-     entry for the node itself (if it doesn't check to see if lo is up).
-   - If you want to send to any node which is not listed in the
-     /proc/net/decnet_neigh file, you'll need to set the default device
-     to point to an Ethernet card with connection to a router. This is
-     again done with the /proc/sys/net/decnet/default_device file.
-   - Try starting a simple server and client, like the dnping/dnmirror
-     over the loopback interface. With luck they should communicate.
-     For this step and those after, you'll need the DECnet library
-     which can be obtained from the above ftp sites as well as the
-     actual utilities themselves.
-   - If this seems to work, then try talking to a node on your local
-     network, and see if you can obtain the same results.
-   - At this point you are on your own... :-)
-
-6. How to send a bug report
-===========================
-
-If you've found a bug and want to report it, then there are several things
-you can do to help me work out exactly what it is that is wrong. Useful
-information (_most_ of which _is_ _essential_) includes:
-
- - What kernel version are you running ?
- - What version of the patch are you running ?
- - How far though the above set of tests can you get ?
- - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ?
- - Which services are you running ?
- - Which client caused the problem ?
- - How much data was being transferred ?
- - Was the network congested ?
- - How can the problem be reproduced ?
- - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of
-   tcpdump don't understand how to dump DECnet properly, so including
-   the hex listing of the packet contents is _essential_, usually the -x flag.
-   You may also need to increase the length grabbed with the -s flag. The
-   -e flag also provides very useful information (ethernet MAC addresses))
-
-7. MAC FAQ
-==========
-
-A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet
-interact and how to get the best performance from your hardware.
-
-Ethernet cards are designed to normally only pass received network frames
-to a host computer when they are addressed to it, or to the broadcast address.
-
-Linux has an interface which allows the setting of extra addresses for
-an ethernet card to listen to. If the ethernet card supports it, the
-filtering operation will be done in hardware, if not the extra unwanted packets
-received will be discarded by the host computer. In the latter case,
-significant processor time and bus bandwidth can be used up on a busy
-network (see the NAPI documentation for a longer explanation of these
-effects).
-
-DECnet makes use of this interface to allow running DECnet on an ethernet
-card which has already been configured using TCP/IP (presumably using the
-built in MAC address of the card, as usual) and/or to allow multiple DECnet
-addresses on each physical interface. If you do this, be aware that if your
-ethernet card doesn't support perfect hashing in its MAC address filter
-then your computer will be doing more work than required. Some cards
-will simply set themselves into promiscuous mode in order to receive
-packets from the DECnet specified addresses. So if you have one of these
-cards its better to set the MAC address of the card as described above
-to gain the best efficiency. Better still is to use a card which supports
-NAPI as well.
-
-
-8. Mailing list
-===============
-
-If you are keen to get involved in development, or want to ask questions
-about configuration, or even just report bugs, then there is a mailing
-list that you can join, details are at:
-
-http://sourceforge.net/mail/?group_id=4993
-
-9. Legal Info
-=============
-
-The Linux DECnet project team have placed their code under the GPL. The
-software is provided "as is" and without warranty express or implied.
-DECnet is a trademark of Compaq. This software is not a product of
-Compaq. We acknowledge the help of people at Compaq in providing extra
-documentation above and beyond what was previously publicly available.
-
-Steve Whitehouse <SteveW@ACM.org>
-
diff --git linux-libre-5.10-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst linux-libre-5.10.233-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- linux-libre-5.10-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git linux-libre-5.10-gnu1/Documentation/networking/index.rst linux-libre-5.10.233-gnu1/Documentation/networking/index.rst
index 63ef386afd0a..9fab919ed530 100644
--- linux-libre-5.10-gnu1/Documentation/networking/index.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/index.rst
@@ -46,7 +46,6 @@ Contents:
    cdc_mbim
    dccp
    dctcp
-   decnet
    dns_resolver
    driver
    eql
diff --git linux-libre-5.10-gnu1/Documentation/networking/ip-sysctl.rst linux-libre-5.10.233-gnu1/Documentation/networking/ip-sysctl.rst
index 25e6673a085a..e912a47765f3 100644
--- linux-libre-5.10-gnu1/Documentation/networking/ip-sysctl.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/ip-sysctl.rst
@@ -272,6 +272,8 @@ tcp_app_win - INTEGER
 	Reserve max(window/2^tcp_app_win, mss) of window for application
 	buffer. Value 0 is special, it means that nothing is reserved.
 
+	Possible values are [0, 31], inclusive.
+
 	Default: 31
 
 tcp_autocorking - BOOLEAN
@@ -630,16 +632,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 
 	default: initial size of receive buffer used by TCP sockets.
 	This value overrides net.core.rmem_default used by other protocols.
-	Default: 87380 bytes. This value results in window of 65535 with
-	default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
-	less for default tcp_app_win. See below about these variables.
+	Default: 131072 bytes.
+	This value results in initial window of 65535.
 
 	max: maximal size of receive buffer allowed for automatically
 	selected receiver buffers for TCP socket. This value does not override
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 6MB, depending on RAM size.
+	Default: between 131072 and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
@@ -712,6 +713,31 @@ tcp_syncookies - INTEGER
 	network connections you can set this knob to 2 to enable
 	unconditionally generation of syncookies.
 
+tcp_migrate_req - BOOLEAN
+	The incoming connection is tied to a specific listening socket when
+	the initial SYN packet is received during the three-way handshake.
+	When a listener is closed, in-flight request sockets during the
+	handshake and established sockets in the accept queue are aborted.
+
+	If the listener has SO_REUSEPORT enabled, other listeners on the
+	same port should have been able to accept such connections. This
+	option makes it possible to migrate such child sockets to another
+	listener after close() or shutdown().
+
+	The BPF_SK_REUSEPORT_SELECT_OR_MIGRATE type of eBPF program should
+	usually be used to define the policy to pick an alive listener.
+	Otherwise, the kernel will randomly pick an alive listener only if
+	this option is enabled.
+
+	Note that migration between listeners with different settings may
+	crash applications. Let's say migration happens from listener A to
+	B, and only B has TCP_SAVE_SYN enabled. B cannot read SYN data from
+	the requests migrated from A. To avoid such a situation, cancel
+	migration by returning SK_DROP in the type of eBPF program, or
+	disable this option.
+
+	Default: 0
+
 tcp_fastopen - INTEGER
 	Enable TCP Fast Open (RFC7413) to send and accept data in the opening
 	SYN packet.
@@ -752,7 +778,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.
 
-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).
 
 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The
@@ -989,7 +1015,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -1081,7 +1107,7 @@ ip_autobind_reuse - BOOLEAN
 	option should only be set by experts.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
@@ -1890,6 +1916,14 @@ accept_ra_min_hop_limit - INTEGER
 
 	Default: 1
 
+accept_ra_min_lft - INTEGER
+	Minimum acceptable lifetime value in Router Advertisement.
+
+	RA sections with a lifetime less than this value shall be
+	ignored. Zero lifetimes stay unaffected.
+
+	Default: 0
+
 accept_ra_pinfo - BOOLEAN
 	Learn Prefix Information in Router Advertisement.
 
@@ -2630,7 +2664,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
diff --git linux-libre-5.10-gnu1/Documentation/networking/ipvs-sysctl.rst linux-libre-5.10.233-gnu1/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..1cfbf1add2fc 100644
--- linux-libre-5.10-gnu1/Documentation/networking/ipvs-sysctl.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.10-gnu1/Documentation/networking/j1939.rst linux-libre-5.10.233-gnu1/Documentation/networking/j1939.rst
index 0a4b73b03b99..59f81ba41160 100644
--- linux-libre-5.10-gnu1/Documentation/networking/j1939.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/j1939.rst
@@ -83,7 +83,7 @@ format, the Group Extension is set in the PS-field.
 
 On the other hand, when using PDU1 format, the PS-field contains a so-called
 Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU1 format is used, the PS-field
 of the PGN shall be set to zero. The Destination Address shall be set
 elsewhere.
 
diff --git linux-libre-5.10-gnu1/Documentation/networking/netdev-FAQ.rst linux-libre-5.10.233-gnu1/Documentation/networking/netdev-FAQ.rst
index 4b9ed5874d5a..be88ab15e53c 100644
--- linux-libre-5.10-gnu1/Documentation/networking/netdev-FAQ.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/netdev-FAQ.rst
@@ -144,77 +144,13 @@ Please send incremental versions on top of what has been merged in order to fix
 the patches the way they would look like if your latest patch series was to be
 merged.
 
-Q: How can I tell what patches are queued up for backporting to the various stable releases?
---------------------------------------------------------------------------------------------
-A: Normally Greg Kroah-Hartman collects stable commits himself, but for
-networking, Dave collects up patches he deems critical for the
-networking subsystem, and then hands them off to Greg.
-
-There is a patchworks queue that you can see here:
-
-  https://patchwork.kernel.org/bundle/netdev/stable/?state=*
-
-It contains the patches which Dave has selected, but not yet handed off
-to Greg.  If Greg already has the patch, then it will be here:
-
-  https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
-
-A quick way to find whether the patch is in this stable-queue is to
-simply clone the repo, and then git grep the mainline commit ID, e.g.
-::
-
-  stable-queue$ git grep -l 284041ef21fdf2e
-  releases/3.0.84/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  releases/3.4.51/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  releases/3.9.8/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  stable/stable-queue$
-
-Q: I see a network patch and I think it should be backported to stable.
------------------------------------------------------------------------
-Q: Should I request it via stable@vger.kernel.org like the references in
-the kernel's Documentation/process/stable-kernel-rules.rst file say?
-A: No, not for networking.  Check the stable queues as per above first
-to see if it is already queued.  If not, then send a mail to netdev,
-listing the upstream commit ID and why you think it should be a stable
-candidate.
-
-Before you jump to go do the above, do note that the normal stable rules
-in :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
-still apply.  So you need to explicitly indicate why it is a critical
-fix and exactly what users are impacted.  In addition, you need to
-convince yourself that you *really* think it has been overlooked,
-vs. having been considered and rejected.
-
-Generally speaking, the longer it has had a chance to "soak" in
-mainline, the better the odds that it is an OK candidate for stable.  So
-scrambling to request a commit be added the day after it appears should
-be avoided.
-
-Q: I have created a network patch and I think it should be backported to stable.
---------------------------------------------------------------------------------
-Q: Should I add a Cc: stable@vger.kernel.org like the references in the
-kernel's Documentation/ directory say?
-A: No.  See above answer.  In short, if you think it really belongs in
-stable, then ensure you write a decent commit log that describes who
-gets impacted by the bug fix and how it manifests itself, and when the
-bug was introduced.  If you do that properly, then the commit will get
-handled appropriately and most likely get put in the patchworks stable
-queue if it really warrants it.
-
-If you think there is some valid information relating to it being in
-stable that does *not* belong in the commit log, then use the three dash
-marker line as described in
-:ref:`Documentation/process/submitting-patches.rst <the_canonical_patch_format>`
-to temporarily embed that information into the patch that you send.
-
-Q: Are all networking bug fixes backported to all stable releases?
-------------------------------------------------------------------
-A: Due to capacity, Dave could only take care of the backports for the
-last two stable releases. For earlier stable releases, each stable
-branch maintainer is supposed to take care of them. If you find any
-patch is missing from an earlier stable branch, please notify
-stable@vger.kernel.org with either a commit ID or a formal patch
-backported, and CC Dave and other relevant networking developers.
+Q: Are there special rules regarding stable submissions on netdev?
+---------------------------------------------------------------
+While it used to be the case that netdev submissions were not supposed
+to carry explicit ``CC: stable@vger.kernel.org`` tags that is no longer
+the case today. Please follow the standard stable rules in
+:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`,
+and make sure you include appropriate Fixes tags!
 
 Q: Is the comment style convention different for the networking content?
 ------------------------------------------------------------------------
diff --git linux-libre-5.10-gnu1/Documentation/networking/netdevices.rst linux-libre-5.10.233-gnu1/Documentation/networking/netdevices.rst
index 5a85fcc80c76..557b97483437 100644
--- linux-libre-5.10-gnu1/Documentation/networking/netdevices.rst
+++ linux-libre-5.10.233-gnu1/Documentation/networking/netdevices.rst
@@ -10,18 +10,177 @@ Introduction
 The following is a random collection of documentation regarding
 network devices.
 
-struct net_device allocation rules
-==================================
+struct net_device lifetime rules
+================================
 Network device structures need to persist even after module is unloaded and
 must be allocated with alloc_netdev_mqs() and friends.
 If device has registered successfully, it will be freed on last use
-by free_netdev(). This is required to handle the pathologic case cleanly
-(example: rmmod mydriver </sys/class/net/myeth/mtu )
+by free_netdev(). This is required to handle the pathological case cleanly
+(example: ``rmmod mydriver </sys/class/net/myeth/mtu``)
 
-alloc_netdev_mqs()/alloc_netdev() reserve extra space for driver
+alloc_netdev_mqs() / alloc_netdev() reserve extra space for driver
 private data which gets freed when the network device is freed. If
 separately allocated data is attached to the network device
-(netdev_priv(dev)) then it is up to the module exit handler to free that.
+(netdev_priv()) then it is up to the module exit handler to free that.
+
+There are two groups of APIs for registering struct net_device.
+First group can be used in normal contexts where ``rtnl_lock`` is not already
+held: register_netdev(), unregister_netdev().
+Second group can be used when ``rtnl_lock`` is already held:
+register_netdevice(), unregister_netdevice(), free_netdevice().
+
+Simple drivers
+--------------
+
+Most drivers (especially device drivers) handle lifetime of struct net_device
+in context where ``rtnl_lock`` is not held (e.g. driver probe and remove paths).
+
+In that case the struct net_device registration is done using
+the register_netdev(), and unregister_netdev() functions:
+
+.. code-block:: c
+
+  int probe()
+  {
+    struct my_device_priv *priv;
+    int err;
+
+    dev = alloc_netdev_mqs(...);
+    if (!dev)
+      return -ENOMEM;
+    priv = netdev_priv(dev);
+
+    /* ... do all device setup before calling register_netdev() ...
+     */
+
+    err = register_netdev(dev);
+    if (err)
+      goto err_undo;
+
+    /* net_device is visible to the user! */
+
+  err_undo:
+    /* ... undo the device setup ... */
+    free_netdev(dev);
+    return err;
+  }
+
+  void remove()
+  {
+    unregister_netdev(dev);
+    free_netdev(dev);
+  }
+
+Note that after calling register_netdev() the device is visible in the system.
+Users can open it and start sending / receiving traffic immediately,
+or run any other callback, so all initialization must be done prior to
+registration.
+
+unregister_netdev() closes the device and waits for all users to be done
+with it. The memory of struct net_device itself may still be referenced
+by sysfs but all operations on that device will fail.
+
+free_netdev() can be called after unregister_netdev() returns on when
+register_netdev() failed.
+
+Device management under RTNL
+----------------------------
+
+Registering struct net_device while in context which already holds
+the ``rtnl_lock`` requires extra care. In those scenarios most drivers
+will want to make use of struct net_device's ``needs_free_netdev``
+and ``priv_destructor`` members for freeing of state.
+
+Example flow of netdev handling under ``rtnl_lock``:
+
+.. code-block:: c
+
+  static void my_setup(struct net_device *dev)
+  {
+    dev->needs_free_netdev = true;
+  }
+
+  static void my_destructor(struct net_device *dev)
+  {
+    some_obj_destroy(priv->obj);
+    some_uninit(priv);
+  }
+
+  int create_link()
+  {
+    struct my_device_priv *priv;
+    int err;
+
+    ASSERT_RTNL();
+
+    dev = alloc_netdev(sizeof(*priv), "net%d", NET_NAME_UNKNOWN, my_setup);
+    if (!dev)
+      return -ENOMEM;
+    priv = netdev_priv(dev);
+
+    /* Implicit constructor */
+    err = some_init(priv);
+    if (err)
+      goto err_free_dev;
+
+    priv->obj = some_obj_create();
+    if (!priv->obj) {
+      err = -ENOMEM;
+      goto err_some_uninit;
+    }
+    /* End of constructor, set the destructor: */
+    dev->priv_destructor = my_destructor;
+
+    err = register_netdevice(dev);
+    if (err)
+      /* register_netdevice() calls destructor on failure */
+      goto err_free_dev;
+
+    /* If anything fails now unregister_netdevice() (or unregister_netdev())
+     * will take care of calling my_destructor and free_netdev().
+     */
+
+    return 0;
+
+  err_some_uninit:
+    some_uninit(priv);
+  err_free_dev:
+    free_netdev(dev);
+    return err;
+  }
+
+If struct net_device.priv_destructor is set it will be called by the core
+some time after unregister_netdevice(), it will also be called if
+register_netdevice() fails. The callback may be invoked with or without
+``rtnl_lock`` held.
+
+There is no explicit constructor callback, driver "constructs" the private
+netdev state after allocating it and before registration.
+
+Setting struct net_device.needs_free_netdev makes core call free_netdevice()
+automatically after unregister_netdevice() when all references to the device
+are gone. It only takes effect after a successful call to register_netdevice()
+so if register_netdevice() fails driver is responsible for calling
+free_netdev().
+
+free_netdev() is safe to call on error paths right after unregister_netdevice()
+or when register_netdevice() fails. Parts of netdev (de)registration process
+happen after ``rtnl_lock`` is released, therefore in those cases free_netdev()
+will defer some of the processing until ``rtnl_lock`` is released.
+
+Devices spawned from struct rtnl_link_ops should never free the
+struct net_device directly.
+
+.ndo_init and .ndo_uninit
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``.ndo_init`` and ``.ndo_uninit`` callbacks are called during net_device
+registration and de-registration, under ``rtnl_lock``. Drivers can use
+those e.g. when parts of their init process need to run under ``rtnl_lock``.
+
+``.ndo_init`` runs before device is visible in the system, ``.ndo_uninit``
+runs during de-registering after device is closed but other subsystems
+may still have outstanding references to the netdevice.
 
 MTU
 ===
diff --git linux-libre-5.10-gnu1/Documentation/powerpc/associativity.rst linux-libre-5.10.233-gnu1/Documentation/powerpc/associativity.rst
new file mode 100644
index 000000000000..4d01c7368561
--- /dev/null
+++ linux-libre-5.10.233-gnu1/Documentation/powerpc/associativity.rst
@@ -0,0 +1,105 @@
+============================
+NUMA resource associativity
+============================
+
+Associativity represents the groupings of the various platform resources into
+domains of substantially similar mean performance relative to resources outside
+of that domain. Resources subsets of a given domain that exhibit better
+performance relative to each other than relative to other resources subsets
+are represented as being members of a sub-grouping domain. This performance
+characteristic is presented in terms of NUMA node distance within the Linux kernel.
+From the platform view, these groups are also referred to as domains.
+
+PAPR interface currently supports different ways of communicating these resource
+grouping details to the OS. These are referred to as Form 0, Form 1 and Form2
+associativity grouping. Form 0 is the oldest format and is now considered deprecated.
+
+Hypervisor indicates the type/form of associativity used via "ibm,architecture-vec-5 property".
+Bit 0 of byte 5 in the "ibm,architecture-vec-5" property indicates usage of Form 0 or Form 1.
+A value of 1 indicates the usage of Form 1 associativity. For Form 2 associativity
+bit 2 of byte 5 in the "ibm,architecture-vec-5" property is used.
+
+Form 0
+------
+Form 0 associativity supports only two NUMA distances (LOCAL and REMOTE).
+
+Form 1
+------
+With Form 1 a combination of ibm,associativity-reference-points, and ibm,associativity
+device tree properties are used to determine the NUMA distance between resource groups/domains.
+
+The “ibm,associativity” property contains a list of one or more numbers (domainID)
+representing the resource’s platform grouping domains.
+
+The “ibm,associativity-reference-points” property contains a list of one or more numbers
+(domainID index) that represents the 1 based ordinal in the associativity lists.
+The list of domainID indexes represents an increasing hierarchy of resource grouping.
+
+ex:
+{ primary domainID index, secondary domainID index, tertiary domainID index.. }
+
+Linux kernel uses the domainID at the primary domainID index as the NUMA node id.
+Linux kernel computes NUMA distance between two domains by recursively comparing
+if they belong to the same higher-level domains. For mismatch at every higher
+level of the resource group, the kernel doubles the NUMA distance between the
+comparing domains.
+
+Form 2
+-------
+Form 2 associativity format adds separate device tree properties representing NUMA node distance
+thereby making the node distance computation flexible. Form 2 also allows flexible primary
+domain numbering. With numa distance computation now detached from the index value in
+"ibm,associativity-reference-points" property, Form 2 allows a large number of primary domain
+ids at the same domainID index representing resource groups of different performance/latency
+characteristics.
+
+Hypervisor indicates the usage of FORM2 associativity using bit 2 of byte 5 in the
+"ibm,architecture-vec-5" property.
+
+"ibm,numa-lookup-index-table" property contains a list of one or more numbers representing
+the domainIDs present in the system. The offset of the domainID in this property is
+used as an index while computing numa distance information via "ibm,numa-distance-table".
+
+prop-encoded-array: The number N of the domainIDs encoded as with encode-int, followed by
+N domainID encoded as with encode-int
+
+For ex:
+"ibm,numa-lookup-index-table" =  {4, 0, 8, 250, 252}. The offset of domainID 8 (2) is used when
+computing the distance of domain 8 from other domains present in the system. For the rest of
+this document, this offset will be referred to as domain distance offset.
+
+"ibm,numa-distance-table" property contains a list of one or more numbers representing the NUMA
+distance between resource groups/domains present in the system.
+
+prop-encoded-array: The number N of the distance values encoded as with encode-int, followed by
+N distance values encoded as with encode-bytes. The max distance value we could encode is 255.
+The number N must be equal to the square of m where m is the number of domainIDs in the
+numa-lookup-index-table.
+
+For ex:
+ibm,numa-lookup-index-table = <3 0 8 40>;
+ibm,numa-distace-table = <9>, /bits/ 8 < 10  20  80 20  10 160 80 160  10>;
+
+::
+
+	  | 0    8   40
+	--|------------
+	  |
+	0 | 10   20  80
+	  |
+	8 | 20   10  160
+	  |
+	40| 80   160  10
+
+A possible "ibm,associativity" property for resources in node 0, 8 and 40
+
+{ 3, 6, 7, 0 }
+{ 3, 6, 9, 8 }
+{ 3, 6, 7, 40}
+
+With "ibm,associativity-reference-points"  { 0x3 }
+
+"ibm,lookup-index-table" helps in having a compact representation of distance matrix.
+Since domainID can be sparse, the matrix of distances can also be effectively sparse.
+With "ibm,lookup-index-table" we can achieve a compact representation of
+distance information.
diff --git linux-libre-5.10-gnu1/Documentation/powerpc/index.rst linux-libre-5.10.233-gnu1/Documentation/powerpc/index.rst
index 6ec64b0d5257..4663b72caab8 100644
--- linux-libre-5.10-gnu1/Documentation/powerpc/index.rst
+++ linux-libre-5.10.233-gnu1/Documentation/powerpc/index.rst
@@ -7,6 +7,7 @@ powerpc
 .. toctree::
     :maxdepth: 1
 
+    associativity
     booting
     bootwrapper
     cpu_families
diff --git linux-libre-5.10-gnu1/Documentation/powerpc/syscall64-abi.rst linux-libre-5.10.233-gnu1/Documentation/powerpc/syscall64-abi.rst
index cf9b2857c72a..d8242049bdcb 100644
--- linux-libre-5.10-gnu1/Documentation/powerpc/syscall64-abi.rst
+++ linux-libre-5.10.233-gnu1/Documentation/powerpc/syscall64-abi.rst
@@ -96,6 +96,16 @@ auxiliary vector.
 
 scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
 
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
 vsyscall
 ========
 
diff --git linux-libre-5.10-gnu1/Documentation/process/code-of-conduct-interpretation.rst linux-libre-5.10.233-gnu1/Documentation/process/code-of-conduct-interpretation.rst
index e899f14a4ba2..43da2cc2e3b9 100644
--- linux-libre-5.10-gnu1/Documentation/process/code-of-conduct-interpretation.rst
+++ linux-libre-5.10.233-gnu1/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the
diff --git linux-libre-5.10-gnu1/Documentation/process/deprecated.rst linux-libre-5.10.233-gnu1/Documentation/process/deprecated.rst
index 9d83b8db8874..86ea327b7e3a 100644
--- linux-libre-5.10-gnu1/Documentation/process/deprecated.rst
+++ linux-libre-5.10.233-gnu1/Documentation/process/deprecated.rst
@@ -70,6 +70,9 @@ Instead, the 2-factor form of the allocator should be used::
 
 	foo = kmalloc_array(count, size, GFP_KERNEL);
 
+Specifically, kmalloc() can be replaced with kmalloc_array(), and
+kzalloc() can be replaced with kcalloc().
+
 If no 2-factor form is available, the saturate-on-overflow helpers should
 be used::
 
@@ -90,9 +93,20 @@ Instead, use the helper::
         array usage and switch to a `flexible array member
         <#zero-length-and-one-element-arrays>`_ instead.
 
-See array_size(), array3_size(), and struct_size(),
-for more details as well as the related check_add_overflow() and
-check_mul_overflow() family of functions.
+For other calculations, please compose the use of the size_mul(),
+size_add(), and size_sub() helpers. For example, in the case of::
+
+	foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL);
+
+Instead, use the helpers::
+
+	foo = krealloc(size_add(current_size,
+				size_mul(chunk_size,
+					 size_sub(count, 3))), GFP_KERNEL);
+
+For more details, also see array3_size() and flex_array_size(),
+as well as the related check_mul_overflow(), check_add_overflow(),
+check_sub_overflow(), and check_shl_overflow() family of functions.
 
 simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull()
 ----------------------------------------------------------------------
diff --git linux-libre-5.10-gnu1/Documentation/process/stable-kernel-rules.rst linux-libre-5.10.233-gnu1/Documentation/process/stable-kernel-rules.rst
index 3973556250e1..fbcb48bc2a90 100644
--- linux-libre-5.10-gnu1/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.10.233-gnu1/Documentation/process/stable-kernel-rules.rst
@@ -35,12 +35,6 @@ Rules on what kind of patches are accepted, and which ones are not, into the
 Procedure for submitting patches to the -stable tree
 ----------------------------------------------------
 
- - If the patch covers files in net/ or drivers/net please follow netdev stable
-   submission guidelines as described in
-   :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
-   after first checking the stable networking queue at
-   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
-   to ensure the requested patch is not already queued up.
  - Security patches should not be handled (solely) by the -stable review
    process but should follow the procedures in
    :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.
@@ -174,7 +168,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee
diff --git linux-libre-5.10-gnu1/Documentation/process/submitting-patches.rst linux-libre-5.10.233-gnu1/Documentation/process/submitting-patches.rst
index 83d9a82055a7..edd263e0992d 100644
--- linux-libre-5.10-gnu1/Documentation/process/submitting-patches.rst
+++ linux-libre-5.10.233-gnu1/Documentation/process/submitting-patches.rst
@@ -71,7 +71,7 @@ as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
@@ -250,11 +250,6 @@ should also read
 :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
 in addition to this file.
 
-Note, however, that some subsystem maintainers want to come to their own
-conclusions on which patches should go to the stable trees.  The networking
-maintainer, in particular, would rather not see individual developers
-adding lines like the above to their patches.
-
 If changes affect userland-kernel interfaces, please send the MAN-PAGES
 maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
 least a notification of the change, so that some information makes its way
diff --git linux-libre-5.10-gnu1/Documentation/scsi/libsas.rst linux-libre-5.10.233-gnu1/Documentation/scsi/libsas.rst
index 7216b5d25800..ea63ab3a9216 100644
--- linux-libre-5.10-gnu1/Documentation/scsi/libsas.rst
+++ linux-libre-5.10.233-gnu1/Documentation/scsi/libsas.rst
@@ -189,13 +189,10 @@ num_phys
 The event interface::
 
 	/* LLDD calls these to notify the class of an event. */
-	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
-	void (*notify_port_event)(struct sas_phy *, enum port_event);
-	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
-
-When sas_register_ha() returns, those are set and can be
-called by the LLDD to notify the SAS layer of such events
-the SAS layer.
+	void sas_notify_port_event(struct sas_phy *, enum port_event);
+	void sas_notify_phy_event(struct sas_phy *, enum phy_event);
+	void sas_notify_port_event_gfp(struct sas_phy *, enum port_event, gfp_t);
+	void sas_notify_phy_event_gfp(struct sas_phy *, enum phy_event, gfp_t);
 
 The port notification::
 
diff --git linux-libre-5.10-gnu1/Documentation/scsi/scsi_mid_low_api.rst linux-libre-5.10.233-gnu1/Documentation/scsi/scsi_mid_low_api.rst
index 5bc17d012b25..d65c902b69ea 100644
--- linux-libre-5.10-gnu1/Documentation/scsi/scsi_mid_low_api.rst
+++ linux-libre-5.10.233-gnu1/Documentation/scsi/scsi_mid_low_api.rst
@@ -1195,11 +1195,11 @@ Members of interest:
 		 - pointer to scsi_device object that this command is
                    associated with.
     resid
-		 - an LLD should set this signed integer to the requested
+		 - an LLD should set this unsigned integer to the requested
                    transfer length (i.e. 'request_bufflen') less the number
                    of bytes that are actually transferred. 'resid' is
                    preset to 0 so an LLD can ignore it if it cannot detect
-                   underruns (overruns should be rare). If possible an LLD
+                   underruns (overruns should not be reported). An LLD
                    should set 'resid' prior to invoking 'done'. The most
                    interesting case is data transfers from a SCSI target
                    device (e.g. READs) that underrun.
diff --git linux-libre-5.10-gnu1/Documentation/security/keys/core.rst linux-libre-5.10.233-gnu1/Documentation/security/keys/core.rst
index aa0081685ee1..b3ed5c581034 100644
--- linux-libre-5.10-gnu1/Documentation/security/keys/core.rst
+++ linux-libre-5.10.233-gnu1/Documentation/security/keys/core.rst
@@ -1040,8 +1040,8 @@ The keyctl syscall functions are:
 
      "key" is the ID of the key to be watched.
 
-     "queue_fd" is a file descriptor referring to an open "/dev/watch_queue"
-     which manages the buffer into which notifications will be delivered.
+     "queue_fd" is a file descriptor referring to an open pipe which
+     manages the buffer into which notifications will be delivered.
 
      "filter" is either NULL to remove a watch or a filter specification to
      indicate what events are required from the key.
diff --git linux-libre-5.10-gnu1/Documentation/sound/alsa-configuration.rst linux-libre-5.10.233-gnu1/Documentation/sound/alsa-configuration.rst
index d66da6cb867c..3aa511e42e10 100644
--- linux-libre-5.10-gnu1/Documentation/sound/alsa-configuration.rst
+++ linux-libre-5.10.233-gnu1/Documentation/sound/alsa-configuration.rst
@@ -1501,7 +1501,7 @@ Module for Digigram miXart8 sound cards.
 
 This module supports multiple cards.
 Note: One miXart8 board will be represented as 4 alsa cards.
-See MIXART.txt for details.
+See Documentation/sound/cards/mixart.rst for details.
 
 When the driver is compiled as a module and the hotplug firmware
 is supported, the firmware data is loaded via hotplug automatically.
diff --git linux-libre-5.10-gnu1/Documentation/sound/hd-audio/models.rst linux-libre-5.10.233-gnu1/Documentation/sound/hd-audio/models.rst
index 0ea967d34583..120430450014 100644
--- linux-libre-5.10-gnu1/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.10.233-gnu1/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
@@ -326,6 +330,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======
@@ -698,7 +704,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
diff --git linux-libre-5.10-gnu1/Documentation/sound/soc/dapm.rst linux-libre-5.10.233-gnu1/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- linux-libre-5.10-gnu1/Documentation/sound/soc/dapm.rst
+++ linux-libre-5.10.233-gnu1/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.
 
diff --git linux-libre-5.10-gnu1/Documentation/sphinx/kernel_include.py linux-libre-5.10.233-gnu1/Documentation/sphinx/kernel_include.py
index f523aa68a36b..cf601bd058ab 100755
--- linux-libre-5.10-gnu1/Documentation/sphinx/kernel_include.py
+++ linux-libre-5.10.233-gnu1/Documentation/sphinx/kernel_include.py
@@ -94,7 +94,6 @@ class KernelInclude(Include):
         # HINT: this is the only line I had to change / commented out:
         #path = utils.relative_path(None, path)
 
-        path = nodes.reprunicode(path)
         encoding = self.options.get(
             'encoding', self.state.document.settings.input_encoding)
         e_handler=self.state.document.settings.input_encoding_error_handler
diff --git linux-libre-5.10-gnu1/Documentation/sphinx/load_config.py linux-libre-5.10.233-gnu1/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-5.10-gnu1/Documentation/sphinx/load_config.py
+++ linux-libre-5.10.233-gnu1/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-5.10-gnu1/Documentation/sphinx/parse-headers.pl linux-libre-5.10.233-gnu1/Documentation/sphinx/parse-headers.pl
index 1910079f984f..b063f2f1cfb2 100755
--- linux-libre-5.10-gnu1/Documentation/sphinx/parse-headers.pl
+++ linux-libre-5.10.233-gnu1/Documentation/sphinx/parse-headers.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 use strict;
 use Text::Tabs;
 use Getopt::Long;
diff --git linux-libre-5.10-gnu1/Documentation/target/tcm_mod_builder.py linux-libre-5.10.233-gnu1/Documentation/target/tcm_mod_builder.py
index 1548d8420499..54492aa813b9 100755
--- linux-libre-5.10-gnu1/Documentation/target/tcm_mod_builder.py
+++ linux-libre-5.10.233-gnu1/Documentation/target/tcm_mod_builder.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # The TCM v4 multi-protocol fabric module generation script for drivers/target/$NEW_MOD
 #
 # Copyright (c) 2010 Rising Tide Systems
diff --git linux-libre-5.10-gnu1/Documentation/trace/events.rst linux-libre-5.10.233-gnu1/Documentation/trace/events.rst
index 2a5aa48eff6c..9df29a935757 100644
--- linux-libre-5.10-gnu1/Documentation/trace/events.rst
+++ linux-libre-5.10.233-gnu1/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/trace/ftrace.rst linux-libre-5.10.233-gnu1/Documentation/trace/ftrace.rst
index 87cf5c010d5d..ed2e45f9b762 100644
--- linux-libre-5.10-gnu1/Documentation/trace/ftrace.rst
+++ linux-libre-5.10.233-gnu1/Documentation/trace/ftrace.rst
@@ -2923,7 +2923,7 @@ Produces::
               bash-1994  [000] ....  4342.324898: ima_get_action <-process_measurement
               bash-1994  [000] ....  4342.324898: ima_match_policy <-ima_get_action
               bash-1994  [000] ....  4342.324899: do_truncate <-do_last
-              bash-1994  [000] ....  4342.324899: should_remove_suid <-do_truncate
+              bash-1994  [000] ....  4342.324899: setattr_should_drop_suidgid <-do_truncate
               bash-1994  [000] ....  4342.324899: notify_change <-do_truncate
               bash-1994  [000] ....  4342.324900: current_fs_time <-notify_change
               bash-1994  [000] ....  4342.324900: current_kernel_time <-current_fs_time
diff --git linux-libre-5.10-gnu1/Documentation/trace/histogram.rst linux-libre-5.10.233-gnu1/Documentation/trace/histogram.rst
index b71e09f745c3..a9ffc4f3ee69 100644
--- linux-libre-5.10-gnu1/Documentation/trace/histogram.rst
+++ linux-libre-5.10.233-gnu1/Documentation/trace/histogram.rst
@@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
   will use the event's kernel stacktrace as the key.  The keywords
   'keys' or 'key' can be used to specify keys, and the keywords
   'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
   keyword.  Hashing a compound key produces a unique entry in the
   table for each unique combination of component keys, and can be
   useful for providing more fine-grained summaries of event data.
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/decode_msr.py linux-libre-5.10.233-gnu1/Documentation/trace/postprocess/decode_msr.py
index 0ab40e0db580..aa9cc7abd5c2 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/decode_msr.py
+++ linux-libre-5.10.233-gnu1/Documentation/trace/postprocess/decode_msr.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # add symbolic names to read_msr / write_msr in trace
 # decode_msr msr-index.h < trace
 import sys
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl linux-libre-5.10.233-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
index 0a120aae33ce..b9b7d80c2f9d 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
+++ linux-libre-5.10.233-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC (proof of concept or piece of crap, take your pick) for reading the
 # text representation of trace output related to page allocation. It makes an attempt
 # to extract some high-level information on what is going on. The accuracy of the parser
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl linux-libre-5.10.233-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index 995da15b16ca..2f4e39875fb3 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ linux-libre-5.10.233-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC for reading the text representation of trace output related to
 # page reclaim. It makes an attempt to extract some high-level information on
 # what is going on. The accuracy of the parser may vary
diff --git linux-libre-5.10-gnu1/Documentation/translations/it_IT/kernel-hacking/locking.rst linux-libre-5.10.233-gnu1/Documentation/translations/it_IT/kernel-hacking/locking.rst
index bf1acd6204ef..192ab8e28125 100644
--- linux-libre-5.10-gnu1/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ linux-libre-5.10.233-gnu1/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -1400,7 +1400,7 @@ Riferimento per l'API dei Mutex
 Riferimento per l'API dei Futex
 ===============================
 
-.. kernel-doc:: kernel/futex.c
+.. kernel-doc:: kernel/futex/core.c
    :internal:
 
 Approfondimenti
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-5.10.233-gnu1/Documentation/userspace-api/ioctl/ioctl-number.rst
index 55a2d9b2ce33..a7373d4e3984 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-5.10.233-gnu1/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -303,7 +303,6 @@ Code  Seq#    Include File                                           Comments
 0x89  00-06  arch/x86/include/asm/sockios.h
 0x89  0B-DF  linux/sockios.h
 0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
-0x89  E0-EF  linux/dn.h                                              PROTOPRIVATE range
 0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
 0x8B  all    linux/wireless.h
 0x8C  00-3F                                                          WiNRADiO driver
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst linux-libre-5.10.233-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index ce728c757eaf..b864869b42bc 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ linux-libre-5.10.233-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -4030,7 +4030,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
       - 0x00000001
       -
     * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
@@ -4238,6 +4238,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
       - 0x00000100
       -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000200
+      -
 
 .. c:type:: v4l2_hevc_dpb_entry
 
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst linux-libre-5.10.233-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
index c9b7bb3ca089..eff6727c69d3 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ linux-libre-5.10.233-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -1567,8 +1567,8 @@ The following tables list existing packed RGB formats.
       - MEDIA_BUS_FMT_RGB101010_1X30
       - 0x1018
       -
-      - 0
-      - 0
+      -
+      -
       - r\ :sub:`9`
       - r\ :sub:`8`
       - r\ :sub:`7`
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/seccomp_filter.rst linux-libre-5.10.233-gnu1/Documentation/userspace-api/seccomp_filter.rst
index bd9165241b6c..6efb41cc8072 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/seccomp_filter.rst
+++ linux-libre-5.10.233-gnu1/Documentation/userspace-api/seccomp_filter.rst
@@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)``  (or ``poll()``) on a
 seccomp notification fd to receive a ``struct seccomp_notif``, which contains
 five members: the input length of the structure, a unique-per-filter ``id``,
 the ``pid`` of the task which triggered this request (which may be 0 if the
-task is in a pid ns not visible from the listener's pid namespace), a ``flags``
-member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
-whether or not the notification is a result of a non-fatal signal, and the
-``data`` passed to seccomp. Userspace can then make a decision based on this
-information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
-response, indicating what should be returned to userspace. The ``id`` member of
-``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
-seccomp_notif``.
+task is in a pid ns not visible from the listener's pid namespace). The
+notification also contains the ``data`` passed to seccomp, and a filters flag.
+The structure should be zeroed out prior to calling the ioctl.
+
+Userspace can then make a decision based on this information about what to do,
+and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be
+returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should
+be the same ``id`` as in ``struct seccomp_notif``.
 
 It is worth noting that ``struct seccomp_data`` contains the values of register
 arguments to the syscall, but does not contain pointers to memory. The task's
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/api.rst linux-libre-5.10.233-gnu1/Documentation/virt/kvm/api.rst
index e00a66d72372..08295f488d05 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/api.rst
+++ linux-libre-5.10.233-gnu1/Documentation/virt/kvm/api.rst
@@ -182,6 +182,9 @@ is dependent on the CPU capability and the kernel configuration. The limit can
 be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION
 ioctl() at run-time.
 
+Creation of the VM will fail if the requested IPA size (whether it is
+implicit or explicit) is unsupported on the host.
+
 Please note that configuring the IPA size does not affect the capability
 exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects
 size of the address translated by the stage2 level (guest physical to
@@ -1264,6 +1267,9 @@ field userspace_addr, which must point at user addressable memory for
 the entire memory slot size.  Any object may back this memory, including
 anonymous memory, ordinary files, and hugetlbfs.
 
+On architectures that support a form of address tagging, userspace_addr must
+be an untagged address.
+
 It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
 be identical.  This allows large pages in the guest to be backed by large
 pages in the host.
@@ -1316,7 +1322,7 @@ documentation when it pops into existence).
 
 :Capability: KVM_CAP_ENABLE_CAP_VM
 :Architectures: all
-:Type: vcpu ioctl
+:Type: vm ioctl
 :Parameters: struct kvm_enable_cap (in)
 :Returns: 0 on success; -1 on error
 
@@ -4025,6 +4031,18 @@ not holding a previously reported uncorrected error).
 :Parameters: struct kvm_s390_cmma_log (in, out)
 :Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 
@@ -4105,12 +4123,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 ----------------------------
 
@@ -4804,8 +4816,10 @@ If an MSR access is not permitted through the filtering, it generates a
 allows user space to deflect and potentially handle various MSR accesses
 into user space.
 
-If a vCPU is in running state while this ioctl is invoked, the vCPU may
-experience inconsistent filtering behavior on MSR accesses.
+Note, invoking this ioctl with a vCPU is running is inherently racy.  However,
+KVM does guarantee that vCPUs will see either the previous filter or the new
+filter, e.g. MSRs with identical settings in both the old and new filter will
+have deterministic behavior.
 
 
 5. The kvm_run structure
@@ -6390,3 +6404,63 @@ When enabled, KVM will disable paravirtual features provided to the
 guest according to the bits in the KVM_CPUID_FEATURES CPUID leaf
 (0x40000001). Otherwise, a guest may use the paravirtual features
 regardless of what has actually been exposed through the CPUID leaf.
+
+9. Known KVM API problems
+=========================
+
+In some cases, KVM's API has some inconsistencies or common pitfalls
+that userspace need to be aware of.  This section details some of
+these issues.
+
+Most of them are architecture specific, so the section is split by
+architecture.
+
+9.1. x86
+--------
+
+``KVM_GET_SUPPORTED_CPUID`` issues
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible
+to take its result and pass it directly to ``KVM_SET_CPUID2``.  This section
+documents some cases in which that requires some care.
+
+Local APIC features
+~~~~~~~~~~~~~~~~~~~
+
+CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``,
+but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or
+``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of
+the local APIC.
+
+The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature.
+
+CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``.
+It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
+has enabled in-kernel emulation of the local APIC.
+
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems.  Different
+versions of KVM return different values for this information and userspace
+should not rely on it.  Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU.  In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
+Obsolete ioctls and capabilities
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually
+available.  Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if
+available.
+
+Ordering of KVM_GET_*/KVM_SET_* ioctls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TBD
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/devices/vm.rst linux-libre-5.10.233-gnu1/Documentation/virt/kvm/devices/vm.rst
index 0aa5b1cfd700..147efec626e5 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/devices/vm.rst
+++ linux-libre-5.10.233-gnu1/Documentation/virt/kvm/devices/vm.rst
@@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT).
 :Parameters: address of a buffer in user space to store the data (u8) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
 -----------------------------------
@@ -224,6 +225,7 @@ the POP (u64).
 
 :Parameters: address of a buffer in user space to store the data (u64) to
 :Returns:    -EFAULT if the given address is not accessible from kernel space
+	     -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT
 -----------------------------------
@@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0.
 	     (kvm_s390_vm_tod_clock) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 4. GROUP: KVM_S390_VM_CRYPTO
 ============================
@@ -299,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 :Parameters: none
 :Returns:   -ENOMEM if there is not enough free memory to start migration mode;
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined);
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/mmu.rst linux-libre-5.10.233-gnu1/Documentation/virt/kvm/mmu.rst
index 5bfe28b0728e..20d85daed395 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/mmu.rst
+++ linux-libre-5.10.233-gnu1/Documentation/virt/kvm/mmu.rst
@@ -171,8 +171,8 @@ Shadow pages contain the following information:
     shadow pages) so role.quadrant takes values in the range 0..3.  Each
     quadrant maps 1GB virtual address space.
   role.access:
-    Inherited guest access permissions in the form uwx.  Note execute
-    permission is positive, not negative.
+    Inherited guest access permissions from the parent ptes in the form uwx.
+    Note execute permission is positive, not negative.
   role.invalid:
     The page is invalid and should not be used.  It is a root page that is
     currently pinned (by a cpu hardware register pointing to it); once it is
diff --git linux-libre-5.10-gnu1/Documentation/vm/arch_pgtable_helpers.rst linux-libre-5.10.233-gnu1/Documentation/vm/arch_pgtable_helpers.rst
index f3591ee3aaa8..552567d863b8 100644
--- linux-libre-5.10-gnu1/Documentation/vm/arch_pgtable_helpers.rst
+++ linux-libre-5.10.233-gnu1/Documentation/vm/arch_pgtable_helpers.rst
@@ -50,7 +50,7 @@ PTE Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pte_mkwrite               | Creates a writable PTE                           |
 +---------------------------+--------------------------------------------------+
-| pte_mkwrprotect           | Creates a write protected PTE                    |
+| pte_wrprotect             | Creates a write protected PTE                    |
 +---------------------------+--------------------------------------------------+
 | pte_mkspecial             | Creates a special PTE                            |
 +---------------------------+--------------------------------------------------+
@@ -120,7 +120,7 @@ PMD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pmd_mkwrite               | Creates a writable PMD                           |
 +---------------------------+--------------------------------------------------+
-| pmd_mkwrprotect           | Creates a write protected PMD                    |
+| pmd_wrprotect             | Creates a write protected PMD                    |
 +---------------------------+--------------------------------------------------+
 | pmd_mkspecial             | Creates a special PMD                            |
 +---------------------------+--------------------------------------------------+
@@ -186,7 +186,7 @@ PUD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pud_mkwrite               | Creates a writable PUD                           |
 +---------------------------+--------------------------------------------------+
-| pud_mkwrprotect           | Creates a write protected PUD                    |
+| pud_wrprotect             | Creates a write protected PUD                    |
 +---------------------------+--------------------------------------------------+
 | pud_mkdevmap              | Creates a ZONE_DEVICE mapped PUD                 |
 +---------------------------+--------------------------------------------------+
@@ -224,7 +224,7 @@ HugeTLB Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | huge_pte_mkwrite          | Creates a writable HugeTLB                       |
 +---------------------------+--------------------------------------------------+
-| huge_pte_mkwrprotect      | Creates a write protected HugeTLB                |
+| huge_pte_wrprotect        | Creates a write protected HugeTLB                |
 +---------------------------+--------------------------------------------------+
 | huge_ptep_get_and_clear   | Clears a HugeTLB                                 |
 +---------------------------+--------------------------------------------------+
diff --git linux-libre-5.10-gnu1/Documentation/vm/memory-model.rst linux-libre-5.10.233-gnu1/Documentation/vm/memory-model.rst
index 9daadf9faba1..ce398a7dc6cd 100644
--- linux-libre-5.10-gnu1/Documentation/vm/memory-model.rst
+++ linux-libre-5.10.233-gnu1/Documentation/vm/memory-model.rst
@@ -51,8 +51,7 @@ call :c:func:`free_area_init` function. Yet, the mappings array is not
 usable until the call to :c:func:`memblock_free_all` that hands all the
 memory to the page allocator.
 
-If an architecture enables `CONFIG_ARCH_HAS_HOLES_MEMORYMODEL` option,
-it may free parts of the `mem_map` array that do not cover the
+An architecture may free parts of the `mem_map` array that do not cover the
 actual physical pages. In such case, the architecture specific
 :c:func:`pfn_valid` implementation should take the holes in the
 `mem_map` into account.
diff --git linux-libre-5.10-gnu1/Documentation/vm/slub.rst linux-libre-5.10.233-gnu1/Documentation/vm/slub.rst
index 03f294a638bd..d3028554b1e9 100644
--- linux-libre-5.10-gnu1/Documentation/vm/slub.rst
+++ linux-libre-5.10.233-gnu1/Documentation/vm/slub.rst
@@ -181,7 +181,7 @@ SLUB Debug output
 Here is a sample of slub debug output::
 
  ====================================================================
- BUG kmalloc-8: Redzone overwritten
+ BUG kmalloc-8: Right Redzone overwritten
  --------------------------------------------------------------------
 
  INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
@@ -189,10 +189,10 @@ Here is a sample of slub debug output::
  INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
  INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
 
- Bytes b4 0xc90f6d10:  00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
-   Object 0xc90f6d20:  31 30 31 39 2e 30 30 35                         1019.005
-  Redzone 0xc90f6d28:  00 cc cc cc                                     .
-  Padding 0xc90f6d50:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
+ Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object   (0xc90f6d20): 31 30 31 39 2e 30 30 35                         1019.005
+ Redzone  (0xc90f6d28): 00 cc cc cc                                     .
+ Padding  (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
 
    [<c010523d>] dump_trace+0x63/0x1eb
    [<c01053df>] show_trace_log_lvl+0x1a/0x2f
diff --git linux-libre-5.10-gnu1/Documentation/x86/mds.rst linux-libre-5.10.233-gnu1/Documentation/x86/mds.rst
index 5d4330be200f..e801df0bb3a8 100644
--- linux-libre-5.10-gnu1/Documentation/x86/mds.rst
+++ linux-libre-5.10.233-gnu1/Documentation/x86/mds.rst
@@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing:
 
     mds_clear_cpu_buffers()
 
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
+
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
 
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
diff --git linux-libre-5.10-gnu1/Documentation/x86/topology.rst linux-libre-5.10.233-gnu1/Documentation/x86/topology.rst
index e29739904e37..7f58010ea86a 100644
--- linux-libre-5.10-gnu1/Documentation/x86/topology.rst
+++ linux-libre-5.10.233-gnu1/Documentation/x86/topology.rst
@@ -41,6 +41,8 @@ Package
 Packages contain a number of cores plus shared resources, e.g. DRAM
 controller, shared caches etc.
 
+Modern systems may also use the term 'Die' for package.
+
 AMD nomenclature for package is 'Node'.
 
 Package-related topology information in the kernel:
@@ -53,11 +55,18 @@ Package-related topology information in the kernel:
 
     The number of dies in a package. This information is retrieved via CPUID.
 
+  - cpuinfo_x86.cpu_die_id:
+
+    The physical ID of the die. This information is retrieved via CPUID.
+
   - cpuinfo_x86.phys_proc_id:
 
     The physical ID of the package. This information is retrieved via CPUID
     and deduced from the APIC IDs of the cores in the package.
 
+    Modern systems use this value for the socket. There may be multiple
+    packages within a socket. This value may differ from cpu_die_id.
+
   - cpuinfo_x86.logical_proc_id:
 
     The logical ID of the package. As we do not trust BIOSes to enumerate the
diff --git linux-libre-5.10-gnu1/MAINTAINERS linux-libre-5.10.233-gnu1/MAINTAINERS
index 281de213ef47..cdb5f1f22f4c 100644
--- linux-libre-5.10-gnu1/MAINTAINERS
+++ linux-libre-5.10.233-gnu1/MAINTAINERS
@@ -1155,7 +1155,7 @@ M:	Joel Fernandes <joel@joelfernandes.org>
 M:	Christian Brauner <christian@brauner.io>
 M:	Hridya Valsaraju <hridya@google.com>
 M:	Suren Baghdasaryan <surenb@google.com>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/android/
@@ -3001,7 +3001,7 @@ F:	drivers/net/ieee802154/atusb.h
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
-L:	linux-audit@redhat.com (moderated for non-subscribers)
+L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
@@ -4905,13 +4905,6 @@ F:	include/linux/tfrc