diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-5.15.126-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 889ed45be4ca..2d5a5913b5f2 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -51,7 +51,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-ata linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..299e0d1dc161 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-ata
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-bus-iio
index 6ad47a67521c..f41e767e702b 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-bus-iio
@@ -188,7 +188,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610 linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..e9ef69aef20b 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index b46ef147616a..eecbd1603349 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -511,15 +511,18 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpu#.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/retbleed
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ac2947b98950..3d5de44cbbee 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -42,5 +42,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created backends.
+                that this option only takes effect on newly connected backends.
                 The default is Y (enable).
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index 28008905615f..1f7659aa085c 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -15,5 +15,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created frontends.
+                that this option only takes effect on newly connected frontends.
                 The default is Y (enable).
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index f627e705e663..48d41b669627 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -425,6 +425,7 @@ Description:	Show status of f2fs superblock in real time.
 		0x800  SBI_QUOTA_SKIP_FLUSH  skip flushing quota in current CP
 		0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
 		0x2000 SBI_IS_RESIZEFS       resizefs is in process
+		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-5.15-gnu/Documentation/accounting/psi.rst linux-libre-5.15.126-gnu/Documentation/accounting/psi.rst
index f2b3439edcc2..5e40b3f437f9 100644
--- linux-libre-5.15-gnu/Documentation/accounting/psi.rst
+++ linux-libre-5.15.126-gnu/Documentation/accounting/psi.rst
@@ -37,11 +37,7 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such::
-
-	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-
-and for memory and IO::
+The format is as such::
 
 	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
@@ -58,6 +54,9 @@ situation from a state where some tasks are stalled but the CPU is
 still doing productive work. As such, time spent in this subset of the
 stall state is tracked separately and exported in the "full" averages.
 
+CPU full is undefined at the system level, but has been reported
+since 5.13, so it is set to zero for backward compatibility.
+
 The ratios (in %) are tracked as recent trends over ten, sixty, and
 three hundred second windows, which gives insight into short term events
 as well as medium and long term trends. The total absolute stall time
@@ -92,7 +91,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
index 41191b5fb69d..dd913eefbf31 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -84,6 +84,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -723,8 +725,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/cifs/usage.rst
index f170d8820258..3766bf8a1c20 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -734,10 +734,9 @@ SecurityFlags		Flags which control security negotiation and
 			using weaker password hashes is 0x37037 (lanman,
 			plaintext, ntlm, ntlmv2, signing allowed).  Some
 			SecurityFlags require the corresponding menuconfig
-			options to be enabled (lanman and plaintext require
-			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
-			plaintext authentication currently requires also
-			enabling lanman authentication in the security flags
+			options to be enabled.  Enabling plaintext
+			authentication currently requires also enabling
+			lanman authentication in the security flags
 			because the cifs module only supports sending
 			laintext passwords using the older lanman dialect
 			form of the session setup SMB.  (e.g. for authentication
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/dm-init.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
index e5242ff17e9b..981d6a907699 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
@@ -123,3 +123,11 @@ Other examples (per target):
     0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
     fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
     51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
+
+For setups using device-mapper on top of asynchronously probed block
+devices (MMC, USB, ..), it may be necessary to tell dm-init to
+explicitly wait for them to become available before setting up the
+device-mapper tables. This can be done with the "dm-mod.waitfor="
+module parameter, which takes a list of devices to wait for::
+
+  dm-mod.waitfor=<device1>[,..,<deviceN>]
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/writecache.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/device-mapper/writecache.rst
index 10429779a91a..724e028d1858 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/writecache.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/device-mapper/writecache.rst
@@ -78,16 +78,16 @@ Status:
 2. the number of blocks
 3. the number of free blocks
 4. the number of blocks under writeback
-5. the number of read requests
-6. the number of read requests that hit the cache
-7. the number of write requests
-8. the number of write requests that hit uncommitted block
-9. the number of write requests that hit committed block
-10. the number of write requests that bypass the cache
-11. the number of write requests that are allocated in the cache
+5. the number of read blocks
+6. the number of read blocks that hit the cache
+7. the number of write blocks
+8. the number of write blocks that hit uncommitted block
+9. the number of write blocks that hit committed block
+10. the number of write blocks that bypass the cache
+11. the number of write blocks that are allocated in the cache
 12. the number of write requests that are blocked on the freelist
 13. the number of flush requests
-14. the number of discard requests
+14. the number of discarded blocks
 
 Messages:
 	flush
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/devices.txt linux-libre-5.15.126-gnu/Documentation/admin-guide/devices.txt
index 922c23bb4372..c07dc0ee860e 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/devices.txt
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/devices.txt
@@ -2339,13 +2339,7 @@
 		disks (see major number 3) except that the limit on
 		partitions is 31.
 
- 162 char	Raw block device interface
-		  0 = /dev/rawctl	Raw I/O control device
-		  1 = /dev/raw/raw1	First raw I/O device
-		  2 = /dev/raw/raw2	Second raw I/O device
-		    ...
-		 max minor number of raw device is set by kernel config
-		 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
+ 162 char	Used for (now removed) raw block device interface
 
  163 char
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
new file mode 100644
index 000000000000..ec6e9f5bcf9e
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
@@ -0,0 +1,92 @@
+
+.. SPDX-License-Identifier: GPL-2.0
+
+Cross-Thread Return Address Predictions
+=======================================
+
+Certain AMD and Hygon processors are subject to a cross-thread return address
+predictions vulnerability. When running in SMT mode and one sibling thread
+transitions out of C0 state, the other sibling thread could use return target
+predictions from the sibling thread that transitioned out of C0.
+
+The Spectre v2 mitigations protect the Linux kernel, as it fills the return
+address prediction entries with safe targets when context switching to the idle
+thread. However, KVM does allow a VMM to prevent exiting guest mode when
+transitioning out of C0. This could result in a guest-controlled return target
+being consumed by the sibling thread.
+
+Affected processors
+-------------------
+
+The following CPUs are vulnerable:
+
+    - AMD Family 17h processors
+    - Hygon Family 18h processors
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =======================================
+   CVE-2022-27672  Cross-Thread Return Address Predictions
+   ==============  =======================================
+
+Problem
+-------
+
+Affected SMT-capable processors support 1T and 2T modes of execution when SMT
+is enabled. In 2T mode, both threads in a core are executing code. For the
+processor core to enter 1T mode, it is required that one of the threads
+requests to transition out of the C0 state. This can be communicated with the
+HLT instruction or with an MWAIT instruction that requests non-C0.
+When the thread re-enters the C0 state, the processor transitions back
+to 2T mode, assuming the other thread is also still in C0 state.
+
+In affected processors, the return address predictor (RAP) is partitioned
+depending on the SMT mode. For instance, in 2T mode each thread uses a private
+16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon
+transition between 1T/2T mode, the RAP contents are not modified but the RAP
+pointers (which control the next return target to use for predictions) may
+change. This behavior may result in return targets from one SMT thread being
+used by RET predictions in the sibling thread following a 1T/2T switch. In
+particular, a RET instruction executed immediately after a transition to 1T may
+use a return target from the thread that just became idle. In theory, this
+could lead to information disclosure if the return targets used do not come
+from trustworthy code.
+
+Attack scenarios
+----------------
+
+An attack can be mounted on affected processors by performing a series of CALL
+instructions with targeted return locations and then transitioning out of C0
+state.
+
+Mitigation mechanism
+--------------------
+
+Before entering idle state, the kernel context switches to the idle thread. The
+context switch fills the RAP entries (referred to as the RSB in Linux) with safe
+targets by performing a sequence of CALL instructions.
+
+Prevent a guest VM from directly putting the processor into an idle state by
+intercepting HLT and MWAIT instructions.
+
+Both mitigations are required to fully address this issue.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Use existing Spectre v2 mitigations that will fill the RSB on context switch.
+
+Mitigation control for KVM - module parameter
+---------------------------------------------
+
+By default, the KVM hypervisor mitigates this issue by intercepting guest
+attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS
+capability to override those interceptions, but since this is not common, the
+mitigation that covers this path is not enabled by default.
+
+The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on
+using the boolean module parameter mitigate_smt_rsb, e.g.:
+        kvm.mitigate_smt_rsb=1
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/index.rst
index 8cbc711cda93..6828102baaa7 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -17,3 +17,7 @@ are configurable at compile, boot or run time.
    special-register-buffer-data-sampling.rst
    core-scheduling.rst
    l1d_flush.rst
+   processor_mmio_stale_data.rst
+   cross-thread-rsb.rst
+   gather_data_sampling.rst
+   srso
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..c98fd11907cc
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,260 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+	 Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+	 data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+	 Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+	 Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+	 values as part of MD_CLEAR operations. Processors that do not
+	 enumerate MDS_NO (meaning they are affected by MDS) but that do
+	 enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+	 FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+	 IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+	 bit can be set to cause the VERW instruction to not perform the
+	 FB_CLEAR action. Not all processors that support FB_CLEAR will support
+	 FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities  have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel reuses the MDS function to invoke the buffer clearing:
+
+	mds_clear_cpu_buffers()
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+  ==========  =================================================================
+  full        If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and when entering a VM. Idle transitions are
+              protected as well. It does not automatically disable SMT.
+  full,nosmt  Same as full, with SMT disabled on vulnerable CPUs. This is the
+              complete mitigation.
+  off         Disables mitigation completely.
+  ==========  =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable, but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+     * - 'Unknown: No mitigations'
+       - The processor vulnerability status is unknown because it is
+	 out of Servicing period. Mitigation is not attempted.
+
+Definitions:
+------------
+
+Servicing period: The process of providing functional and security updates to
+Intel processors or platforms, utilizing the Intel Platform Update (IPU)
+process or other similar mechanisms.
+
+End of Servicing Updates (ESU): ESU is the date at which Intel will no
+longer provide Servicing, such as through IPU or other similar update
+processes. ESU dates will typically be aligned to end of quarter.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+  ========================  ===========================================
+  'SMT vulnerable'          SMT is enabled
+  'SMT disabled'            SMT is disabled
+  'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+  ========================  ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..0fba3758d0da 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -407,6 +422,14 @@ The possible values in this file are:
   'RSB filling'   Protection of RSB on context switch enabled
   =============   ===========================================
 
+  - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status:
+
+  ===========================  =======================================================
+  'PBRSB-eIBRS: SW sequence'   CPU is affected and protection of RSB on VMEXIT enabled
+  'PBRSB-eIBRS: Vulnerable'    CPU is vulnerable
+  'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
+  ===========================  =======================================================
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -456,8 +479,16 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks, including cross-thread branch target injections
+   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+   Legacy IBRS systems clear the IBRS bit on exit to userspace and
+   therefore explicitly enable STIBP for that
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -468,7 +499,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -481,9 +512,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
@@ -584,12 +618,13 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   enhanced IBRS
+                eibrs,retpoline         enhanced IBRS + Retpolines
+                eibrs,lfence            enhanced IBRS + LFENCE
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -730,7 +765,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/srso.rst
new file mode 100644
index 000000000000..2f923c805802
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Speculative Return Stack Overflow (SRSO)
+========================================
+
+This is a mitigation for the speculative return stack overflow (SRSO)
+vulnerability found on AMD processors. The mechanism is by now the well
+known scenario of poisoning CPU functional units - the Branch Target
+Buffer (BTB) and Return Address Predictor (RAP) in this case - and then
+tricking the elevated privilege domain (the kernel) into leaking
+sensitive data.
+
+AMD CPUs predict RET instructions using a Return Address Predictor (aka
+Return Address Stack/Return Stack Buffer). In some cases, a non-architectural
+CALL instruction (i.e., an instruction predicted to be a CALL but is
+not actually a CALL) can create an entry in the RAP which may be used
+to predict the target of a subsequent RET instruction.
+
+The specific circumstances that lead to this varies by microarchitecture
+but the concern is that an attacker can mis-train the CPU BTB to predict
+non-architectural CALL instructions in kernel space and use this to
+control the speculative target of a subsequent kernel RET, potentially
+leading to information disclosure via a speculative side-channel.
+
+The issue is tracked under CVE-2023-20569.
+
+Affected processors
+-------------------
+
+AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older
+processors have not been investigated.
+
+System information and options
+------------------------------
+
+First of all, it is required that the latest microcode be loaded for
+mitigations to be effective.
+
+The sysfs file showing SRSO mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
+
+The possible values in this file are:
+
+ - 'Not affected'               The processor is not vulnerable
+
+ - 'Vulnerable: no microcode'   The processor is vulnerable, no
+                                microcode extending IBPB functionality
+                                to address the vulnerability has been
+                                applied.
+
+ - 'Mitigation: microcode'      Extended IBPB functionality microcode
+                                patch has been applied. It does not
+                                address User->Kernel and Guest->Host
+                                transitions protection but it does
+                                address User->User and VM->VM attack
+                                vectors.
+
+                                (spec_rstack_overflow=microcode)
+
+ - 'Mitigation: safe RET'       Software-only mitigation. It complements
+                                the extended IBPB microcode patch
+                                functionality by addressing User->Kernel
+                                and Guest->Host transitions protection.
+
+                                Selected by default or by
+                                spec_rstack_overflow=safe-ret
+
+ - 'Mitigation: IBPB'           Similar protection as "safe RET" above
+                                but employs an IBPB barrier on privilege
+                                domain crossings (User->Kernel,
+                                Guest->Host).
+
+                                (spec_rstack_overflow=ibpb)
+
+ - 'Mitigation: IBPB on VMEXIT' Mitigation addressing the cloud provider
+                                scenario - the Guest->Host transitions
+                                only.
+
+                                (spec_rstack_overflow=ibpb-vmexit)
+
+In order to exploit vulnerability, an attacker needs to:
+
+ - gain local access on the machine
+
+ - break kASLR
+
+ - find gadgets in the running kernel in order to use them in the exploit
+
+ - potentially create and pin an additional workload on the sibling
+   thread, depending on the microarchitecture (not necessary on fam 0x19)
+
+ - run the exploit
+
+Considering the performance implications of each mitigation type, the
+default one is 'Mitigation: safe RET' which should take care of most
+attack vectors, including the local User->Kernel one.
+
+As always, the user is advised to keep her/his system up-to-date by
+applying software updates regularly.
+
+The default setting will be reevaluated when needed and especially when
+new attack vectors appear.
+
+As one can surmise, 'Mitigation: safe RET' does come at the cost of some
+performance depending on the workload. If one trusts her/his userspace
+and does not want to suffer the performance impact, one can always
+disable the mitigation with spec_rstack_overflow=off.
+
+Similarly, 'Mitigation: IBPB' is another full mitigation type employing
+an indrect branch prediction barrier after having applied the required
+microcode patch for one's system. This mitigation comes also at
+a performance cost.
+
+Mitigation: safe RET
+--------------------
+
+The mitigation works by ensuring all RET instructions speculate to
+a controlled location, similar to how speculation is controlled in the
+retpoline sequence.  To accomplish this, the __x86_return_thunk forces
+the CPU to mispredict every function return using a 'safe return'
+sequence.
+
+To ensure the safety of this mitigation, the kernel must ensure that the
+safe return sequence is itself free from attacker interference.  In Zen3
+and Zen4, this is accomplished by creating a BTB alias between the
+untraining function srso_untrain_ret_alias() and the safe return
+function srso_safe_ret_alias() which results in evicting a potentially
+poisoned BTB entry and using that safe one for all function returns.
+
+In older Zen1 and Zen2, this is accomplished using a reinterpretation
+technique similar to Retbleed one: srso_untrain_ret() and
+srso_safe_ret().
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-5.15.126-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.15.126-gnu/Documentation/admin-guide/kernel-parameters.txt
index 43dc35fe5bc0..bb78526120f3 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -916,10 +916,6 @@
 
 	debugpat	[X86] Enable PAT debugging
 
-	decnet.addr=	[HW,NET]
-			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.rst.
-
 	default_hugepagesz=
 			[HW] The size of the default HugeTLB page. This is
 			the size represented by the legacy /proc/ hugepages
@@ -1505,6 +1501,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:    Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -1690,6 +1706,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -2198,24 +2216,57 @@
 
 	ivrs_ioapic	[HW,X86-64]
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map IOAPIC-ID decimal 10 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
+			* To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_hpet	[HW,X86-64]
 			Provide an override to the HPET-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map HPET-ID decimal 0 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map HPET-ID decimal 0 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
+			* To map HPET-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map UART-HID:UID AMD0020:0 to
-			PCI device 00:14.5 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map UART-HID:UID AMD0020:0 to
+			PCI segment 0x1 and PCI device ID 00:14.5,
+			write the parameter as:
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
+
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
@@ -2403,8 +2454,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -2999,20 +3054,23 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
+				Equivalent to: gather_data_sampling=off [X86]
 					       kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
+					       kvm.nx_huge_pages=off [X86]
+					       l1tf=off [X86]
+					       mds=off [X86]
+					       mmio_stale_data=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
+					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_v2_user=off [X86]
 					       ssbd=force-off [ARM64]
-					       l1tf=off [X86]
-					       mds=off [X86]
 					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
-					       no_entry_flush [PPC]
-					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3034,6 +3092,8 @@
 				Equivalent to: l1tf=flush,nosmt [X86]
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
+					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -3043,6 +3103,40 @@
 			log everything. Information is printed at KERN_DEBUG
 			so loglevel=8 may also need to be specified.
 
+	mmio_stale_data=
+			[X86,INTEL] Control mitigation for the Processor
+			MMIO Stale Data vulnerabilities.
+
+			Processor MMIO Stale Data is a class of
+			vulnerabilities that may expose data after an MMIO
+			operation. Exposed data could originate or end in
+			the same CPU buffers as affected by MDS and TAA.
+			Therefore, similar to MDS and TAA, the mitigation
+			is to clear the affected CPU buffers.
+
+			This parameter controls the mitigation. The
+			options are:
+
+			full       - Enable mitigation on vulnerable CPUs
+
+			full,nosmt - Enable mitigation and disable SMT on
+				     vulnerable CPUs.
+
+			off        - Unconditionally disable mitigation
+
+			On MDS or TAA affected machines,
+			mmio_stale_data=off can be prevented by an active
+			MDS or TAA mitigation as these vulnerabilities are
+			mitigated with the same mechanism so in order to
+			disable this mitigation, you need to specify
+			mds=off and tsx_async_abort=off too.
+
+			Not specifying this option is equivalent to
+			mmio_stale_data=full.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.
@@ -3446,8 +3540,7 @@
 			difficult since unequal pointers can no longer be
 			compared.  However, if this command-line option is
 			specified, then all normal pointers will have their true
-			value printed.  Pointers printed via %pK may still be
-			hashed.  This option should only be specified when
+			value printed. This option should only be specified when
 			debugging the kernel.  Please do not use on production
 			kernels.
 
@@ -4302,6 +4395,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	randomize_kstack_offset=
 			[KNL] Enable or disable kernel stack offset
 			randomization, which provides roughly 5 bits of
@@ -4921,6 +5020,43 @@
 
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
+	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
+			Speculative Code Execution with Return Instructions)
+			vulnerability.
+
+			AMD-based UNRET and IBPB mitigations alone do not stop
+			sibling threads from influencing the predictions of other
+			sibling threads. For that reason, STIBP is used on pro-
+			cessors that support it, and mitigate SMT on processors
+			that don't.
+
+			off          - no mitigation
+			auto         - automatically select a migitation
+			auto,nosmt   - automatically select a mitigation,
+				       disabling SMT if necessary for
+				       the full mitigation (only on Zen1
+				       and older without STIBP).
+			ibpb         - On AMD, mitigate short speculation
+				       windows on basic block boundaries too.
+				       Safe, highest perf impact. It also
+				       enables STIBP if present. Not suitable
+				       on Intel.
+			ibpb,nosmt   - Like "ibpb" above but will disable SMT
+				       when STIBP is not available. This is
+				       the alternative for systems which do not
+				       have STIBP.
+			unret        - Force enable untrained return thunks,
+				       only effective on AMD f15h-f17h based
+				       systems.
+			unret,nosmt  - Like unret, but will disable SMT when STIBP
+				       is not available. This is the alternative for
+				       systems which do not have STIBP.
+
+			Selecting 'auto' will choose a mitigation method at run
+			time according to the CPU.
+
+			Not specifying this option is equivalent to retbleed=auto.
+
 	rfkill.default_state=
 		0	"airplane mode".  All wifi, bluetooth, wimax, gps, fm,
 			etc. communication is blocked by default.
@@ -5261,8 +5397,13 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - enhanced IBRS
+			eibrs,retpoline   - enhanced IBRS + Retpolines
+			eibrs,lfence      - enhanced IBRS + LFENCE
+			ibrs		  - use IBRS to protect kernel
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -5309,6 +5450,17 @@
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
 
+	spec_rstack_overflow=
+			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+
+			off		- Disable mitigation
+			microcode	- Enable microcode mitigation only
+			safe-ret	- Enable sw-only safe RET mitigation (default)
+			ibpb		- Enable mitigation by issuing IBPB on
+					  kernel entry
+			ibpb-vmexit	- Issue IBPB only on VMEXIT
+					  (cloud-specific mitigation)
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@@ -6349,6 +6501,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/mm/pagemap.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/mm/pagemap.rst
index fb578fbbb76c..49857ce1cd03 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/mm/pagemap.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/mm/pagemap.rst
@@ -23,7 +23,7 @@ There are four components to pagemap:
     * Bit  56    page exclusively mapped (since 4.2)
     * Bit  57    pte is uffd-wp write-protected (since 5.13) (see
       :ref:`Documentation/admin-guide/mm/userfaultfd.rst <userfaultfd>`)
-    * Bits 57-60 zero
+    * Bits 58-60 zero
     * Bit  61    page is file-page or shared-anon (since 3.5)
     * Bit  62    page swapped
     * Bit  63    page present
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/pm/cpuidle.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/pm/cpuidle.rst
index aec2cd2aaea7..19754beb5a4e 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/pm/cpuidle.rst
@@ -612,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
 by default this way, for example.
 
 The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
 
 The *x86* architecture support code recognizes three kernel command line
 options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
@@ -635,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as
 energy-efficiency.  Thus using it for performance reasons may not be a good idea
 at all.]
 
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
 
 In addition to the architecture-level kernel command line options affecting CPU
 idle time management, there are parameters affecting individual ``CPUIdle``
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/security-bugs.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/security-bugs.rst
index 82e29837d589..5a6993795bd2 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/security-bugs.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/security-bugs.rst
@@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 426162009ce9..48b91c485c99 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -671,6 +671,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -795,6 +804,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1013,28 +1023,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space
@@ -1099,7 +1103,7 @@ task_delayacct
 ===============
 
 Enables/disables task delay accounting (see
-:doc:`accounting/delay-accounting.rst`). Enabling this feature incurs
+Documentation/accounting/delay-accounting.rst. Enabling this feature incurs
 a small amount of overhead in the scheduler but is useful for debugging
 and performance tuning. It is required by some tools such as iotop.
 
@@ -1490,6 +1494,16 @@ entry will default to 2 instead of 0.
 2 Unprivileged calls to ``bpf()`` are disabled
 = =============================================================
 
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog
 ========
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/sysctl/net.rst
index 4150f74c521a..806ecd5957a4 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -34,13 +34,14 @@ Table : Subdirectories in /proc/sys/net
  ========= =================== = ========== ==================
  Directory Content               Directory  Content
  ========= =================== = ========== ==================
- core      General parameter     appletalk  Appletalk protocol
- unix      Unix domain sockets   netrom     NET/ROM
- 802       E802 protocol         ax25       AX25
- ethernet  Ethernet protocol     rose       X.25 PLP layer
- ipv4      IP version 4          x25        X.25 protocol
- bridge    Bridging              decnet     DEC net
- ipv6      IP version 6          tipc       TIPC
+ 802       E802 protocol         mptcp     Multipath TCP
+ appletalk Appletalk protocol    netfilter Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose      X.25 PLP layer
+ core      General parameter     tipc      TIPC
+ ethernet  Ethernet protocol     unix      Unix domain sockets
+ ipv4      IP version 4          x25       X.25 protocol
+ ipv6      IP version 6
  ========= =================== = ========== ==================
 
 1. /proc/sys/net/core - Network core options
@@ -271,7 +272,7 @@ poll cycle or the number of packets processed reaches netdev_budget.
 netdev_max_backlog
 ------------------
 
-Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
+Maximum number of packets, queued on the INPUT side, when the interface
 receives packets faster than kernel can process them.
 
 netdev_rss_key
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.15.126-gnu/Documentation/admin-guide/sysctl/vm.rst
index 5e795202111f..f4804ce37c58 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.15.126-gnu/Documentation/admin-guide/sysctl/vm.rst
@@ -948,7 +948,7 @@ how much memory needs to be free before kswapd goes back to sleep.
 
 The unit is in fractions of 10,000. The default value of 10 means the
 distances between watermarks are 0.1% of the available memory in the
-node/system. The maximum value is 1000, or 10% of memory.
+node/system. The maximum value is 3000, or 30% of memory.
 
 A high rate of threads entering direct reclaim (allocstall) or kswapd
 going to sleep prematurely (kswapd_low_wmark_hit_quickly) can indicate
diff --git linux-libre-5.15-gnu/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.15.126-gnu/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..749ae970c319 100644
--- linux-libre-5.15-gnu/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.15.126-gnu/Documentation/arm64/cpu-feature-registers.rst
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,23 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/elf_hwcaps.rst linux-libre-5.15.126-gnu/Documentation/arm64/elf_hwcaps.rst
index ec1a5a63c1d0..b72ff17d600a 100644
--- linux-libre-5.15-gnu/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.15.126-gnu/Documentation/arm64/elf_hwcaps.rst
@@ -247,6 +247,18 @@ HWCAP2_MTE
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/silicon-errata.rst linux-libre-5.15.126-gnu/Documentation/arm64/silicon-errata.rst
index d410a47ffa57..83a75e16e54d 100644
--- linux-libre-5.15-gnu/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.15.126-gnu/Documentation/arm64/silicon-errata.rst
@@ -68,6 +68,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #2441007        | ARM64_ERRATUM_2441007       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #852523         | N/A                         |
@@ -76,10 +78,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #1319537        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #1319367        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
@@ -92,14 +98,34 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2441009        | ARM64_ERRATUM_2441009       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-600         | #1076982,1209401| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-700         | #2268618,2812531| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -163,6 +189,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-5.15-gnu/Documentation/atomic_bitops.txt linux-libre-5.15.126-gnu/Documentation/atomic_bitops.txt
index 093cdaefdb37..d8b101c97031 100644
--- linux-libre-5.15-gnu/Documentation/atomic_bitops.txt
+++ linux-libre-5.15.126-gnu/Documentation/atomic_bitops.txt
@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 
diff --git linux-libre-5.15-gnu/Documentation/conf.py linux-libre-5.15.126-gnu/Documentation/conf.py
index 948a97d6387d..76b31798f94f 100644
--- linux-libre-5.15-gnu/Documentation/conf.py
+++ linux-libre-5.15.126-gnu/Documentation/conf.py
@@ -161,7 +161,7 @@ finally:
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
diff --git linux-libre-5.15-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-5.15.126-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17a..895285c037c7 100644
--- linux-libre-5.15-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-5.15.126-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-5.15-gnu/Documentation/dev-tools/kfence.rst linux-libre-5.15.126-gnu/Documentation/dev-tools/kfence.rst
index 0fbe3308bf37..48244d32780f 100644
--- linux-libre-5.15-gnu/Documentation/dev-tools/kfence.rst
+++ linux-libre-5.15.126-gnu/Documentation/dev-tools/kfence.rst
@@ -231,10 +231,14 @@ Guarded allocations are set up based on the sample interval. After expiration
 of the sample interval, the next allocation through the main allocator (SLAB or
 SLUB) returns a guarded allocation from the KFENCE object pool (allocation
 sizes up to PAGE_SIZE are supported). At this point, the timer is reset, and
-the next allocation is set up after the expiration of the interval. To "gate" a
-KFENCE allocation through the main allocator's fast-path without overhead,
-KFENCE relies on static branches via the static keys infrastructure. The static
-branch is toggled to redirect the allocation to KFENCE.
+the next allocation is set up after the expiration of the interval.
+
+When using ``CONFIG_KFENCE_STATIC_KEYS=y``, KFENCE allocations are "gated"
+through the main allocator's fast-path by relying on static branches via the
+static keys infrastructure. The static branch is toggled to redirect the
+allocation to KFENCE. Depending on sample interval, target workloads, and
+system architecture, this may perform better than the simple dynamic branch.
+Careful benchmarking is recommended.
 
 KFENCE objects each reside on a dedicated page, at either the left or right
 page boundaries selected at random. The pages to the left and right of the
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index 880ddafc634e..a702a18d845e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -135,28 +135,34 @@ properties:
           - const: qcom,msm8974
 
       - items:
-          - enum:
-              - alcatel,idol347
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
           - enum:
-              - longcheer,l8150
+              - alcatel,idol347
               - samsung,a3u-eur
               - samsung,a5u-eur
           - const: qcom,msm8916
 
+      - items:
+          - const: longcheer,l8150
+          - const: qcom,msm8916-v1-qrd/9-v1
+          - const: qcom,msm8916
+
       - items:
           - enum:
               - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
               - sony,karin-row
               - sony,satsuki-row
               - sony,sumire-row
               - sony,suzuran-row
-              - qcom,msm8994
-          - const: qcom,apq8094
+          - const: qcom,msm8994
 
       - items:
           - const: qcom,msm8996-mtp
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/ata/ahci-ceva.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-  - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
-  - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
-			CINMP : COMINIT Negate Minimum Period.
-			CIBGN : COMINIT Burst Gap Nominal.
-			CIBGMX: COMINIT Burst Gap Maximum.
-			CIBGMN: COMINIT Burst Gap Minimum.
-  - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
-  - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
-			CWBGMN: COMWAKE Burst Gap Minimum.
-			CWBGMX: COMWAKE Burst Gap Maximum.
-			CWBGN: COMWAKE Burst Gap Nominal.
-			CWNMP: COMWAKE Negate Minimum Period.
-  - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
-  - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
-			BMX: COM Burst Maximum.
-			BNM: COM Burst Nominal.
-			SFD: Signal Failure Detection value.
-			PTST: Partial to Slumber timer value.
-  - ceva,p0-retry-params: Retry interval timing value for port 0.
-  - ceva,p1-retry-params: Retry interval timing value for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
-			RIT:  Retry Interval Timer.
-			RCT:  Rate Change Timer.
-
-Optional properties:
-  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
-  - phys: phandle for the PHY device
-  - resets: phandle to the reset controller for the SATA IP
-
-Examples:
-	ahci@fd0c0000 {
-		compatible = "ceva,ahci-1v84";
-		reg = <0xfd0c0000 0x200>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 133 4>;
-		clocks = <&clkc SATA_CLK_ID>;
-		ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
-		ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-		ceva,broken-gen2;
-		phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
-		resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	};
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 000000000000..71364c6081ff
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk SATA_REF>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..005e0edd4609 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,16 +22,32 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
   '#clock-cells':
     const: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f10..343598c9f473 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 851cb0781217..047fd69e0377 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 35426fde8610..4b2cd556483c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -31,7 +31,7 @@ properties:
       - description: Display byte clock
       - description: Display byte interface clock
       - description: Display pixel clock
-      - description: Display escape clock
+      - description: Display core clock
       - description: Display AHB clock
       - description: Display AXI clock
 
@@ -64,6 +64,18 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     minItems: 2
     maxItems: 2
@@ -135,8 +147,6 @@ required:
   - phy-names
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
 additionalProperties: false
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 4399715953e1..4dd5eed50506 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -39,7 +39,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 064df50e21a5..23355ac67d3d 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -37,7 +37,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..ddb0ac4c29d4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -34,6 +34,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..419c3b2ac5a6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -72,6 +72,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index b6e1ebfaf366..bb3cbc30d912 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -64,7 +64,7 @@ if:
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 378da2649e66..980f92ad9eba 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -11,7 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    const: xlnx,zynq-gpio-1.0
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
 
   reg:
     maxItems: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
new file mode 100644
index 000000000000..ba54d6998f2e
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+description: |
+  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* Example for a I2C device node */
+                accelerometer@1d {
+                        compatible = "adi,adxl355";
+                        reg = <0x1d>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                accelerometer@0 {
+                        compatible = "adi,adxl355";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
index c115e2e99bd9..4a7b1385fdc7 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -86,7 +86,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index d5c54813ce87..a8f7720d1e3e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -54,7 +54,7 @@ examples:
 
           ad5766@0 {
               compatible = "adi,ad5766";
-              output-range-microvolts = <(-5000) 5000>;
+              output-range-microvolts = <(-5000000) 5000000>;
               reg = <0>;
               spi-cpol;
               spi-max-frequency = <1000000>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index b6bbc312a7cf..1414ba9977c1 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -24,8 +24,10 @@ properties:
 
   interrupts:
     minItems: 1
+    maxItems: 2
     description:
       Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
 
 required:
   - compatible
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2..34c43d3bddfd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
 - vdd-supply: phandle of the regulator that provides the supply voltage.
 - post-power-on-delay-ms: time required by the device after enabling its regulators
   or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
 
 Example:
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 877183cf4278..1ef849dc74d7 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2353f6cf3c80..750720e0123a 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -106,7 +106,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
 
     then:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index bd217e6f5018..5cd144a9ec99 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,7 +55,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-engine:
         allOf:
@@ -184,7 +184,7 @@ examples:
         nand-use-soft-ecc-engine;
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
 
       nand@1 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
index fbdc2083bec4..20ee96584aba 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -23,6 +23,7 @@ properties:
       - brcm,bcm4345c5
       - brcm,bcm43540-bt
       - brcm,bcm4335a0
+      - brcm,bcm4349-bt
 
   shutdown-gpios:
     maxItems: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..ee42328a109d 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b8a0b392b24e..c52ec1ee7df6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -106,6 +106,10 @@ properties:
           - const: imem
           - const: config
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
@@ -221,6 +225,8 @@ examples:
                                      "imem",
                                      "config";
 
+                qcom,qmp = <&aoss_qmp>;
+
                 qcom,smem-states = <&ipa_smp2p_out 0>,
                                    <&ipa_smp2p_out 1>;
                 qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index c115c95ee584..5b8db76b6cdd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -53,20 +53,18 @@ properties:
         - allwinner,sun8i-r40-emac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - ingenic,jz4775-mac
         - ingenic,x1000-mac
         - ingenic,x1600-mac
         - ingenic,x1830-mac
         - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444fd..9b0548264a39 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -59,7 +56,7 @@ properties:
       - const: pcie
       - const: pcie_bus
       - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -166,6 +163,47 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_inbound_axi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 30b6396d83c8..aea0e2bcdd77 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
similarity index 85%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
index 399ebde45409..ff86c87309a4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB2 PHY
@@ -13,8 +13,8 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb2-phy
-      - amlogic,meson-a1-usb2-phy
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -68,7 +68,7 @@ additionalProperties: false
 examples:
   - |
     phy@36000 {
-          compatible = "amlogic,meson-g12a-usb2-phy";
+          compatible = "amlogic,g12a-usb2-phy";
           reg = <0x36000 0x2000>;
           clocks = <&xtal>;
           clock-names = "xtal";
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 453c083cf44c..84738644e398 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -49,7 +49,7 @@ additionalProperties: false
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ad2866c99738..fcd82df3aebb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index 4fe35e650909..8dcdd32c2e01 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -138,7 +138,7 @@ examples:
       clocks = <&sys_clk>;
       pinctrl-0 = <&sgpio2_pins>;
       pinctrl-names = "default";
-      reg = <0x1101059c 0x100>;
+      reg = <0x1101059c 0x118>;
       microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
       bus-frequency = <25000000>;
       sgpio_in2: gpio@0 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 61dd5af80db6..37402c370fbb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -31,7 +31,7 @@ properties:
         $ref: "regulator.yaml#"
 
         properties:
-          regulator-name:
+          regulator-compatible:
             pattern: "^vbuck[1-4]$"
 
     additionalProperties: false
@@ -55,7 +55,7 @@ examples:
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
 
         vbuck3 {
@@ -63,7 +63,7 @@ examples:
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
       };
     };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index f70f2e758a00..e66aac0ad735 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index 2b1f91603897..b72ec404adcd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -47,7 +47,7 @@ properties:
     const: 2
 
   cache-sets:
-    const: 1024
+    enum: [1024, 2048]
 
   cache-size:
     const: 2097152
@@ -85,6 +85,8 @@ then:
       description: |
         Must contain entries for DirError, DataError and DataFail signals.
       maxItems: 3
+    cache-sets:
+      const: 1024
 
 else:
   properties:
@@ -92,6 +94,8 @@ else:
       description: |
         Must contain entries for DirError, DataError, DataFail, DirFail signals.
       minItems: 4
+    cache-sets:
+      const: 2048
 
 additionalProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index 6b8731f7f2fb..1a8d9bf89feb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -79,7 +79,7 @@ properties:
           - description: Error interrupt
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
-          - description: Transmit End interrupt
+          - description: Break interrupt
       - items:
           - description: Error interrupt
           - description: Receive buffer full interrupt
@@ -94,7 +94,7 @@ properties:
           - const: eri
           - const: rxi
           - const: txi
-          - const: tei
+          - const: bri
       - items:
           - const: eri
           - const: rxi
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index cc3fe5ed7421..1b0062e3c1a4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -34,6 +34,8 @@ properties:
       - qcom,rpm-ipq6018
       - qcom,rpm-msm8226
       - qcom,rpm-msm8916
+      - qcom,rpm-msm8936
+      - qcom,rpm-msm8953
       - qcom,rpm-msm8974
       - qcom,rpm-msm8976
       - qcom,rpm-msm8996
@@ -57,6 +59,7 @@ if:
           - qcom,rpm-apq8084
           - qcom,rpm-msm8916
           - qcom,rpm-msm8974
+          - qcom,rpm-msm8953
 then:
   required:
     - qcom,smd-channels
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 2e35aeaa8781..89e3819c6127 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -61,7 +61,7 @@ patternProperties:
         description: phandle of the CPU DAI
 
     patternProperties:
-      "^codec-[0-9]+$":
+      "^codec(-[0-9]+)?$":
         type: object
         description: |-
           Codecs:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
index acd4bbe69731..4adaf92233c8 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -52,7 +52,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -69,7 +71,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml
index 5bf8c76ecda1..1ffe1a01668f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml
@@ -46,7 +46,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -63,7 +65,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
index 027bebf4e8cf..aceba9ed813e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -54,7 +54,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -71,7 +73,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 35a8045b2c70..53627c6e2ae3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -106,7 +106,7 @@ examples:
             dma-names = "rx", "tx";
 
             flash@0 {
-                    compatible = "spi-nor";
+                    compatible = "jedec,spi-nor";
                     reg = <0>;
                     spi-max-frequency = <104000000>;
                     spi-tx-bus-width = <2>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index ef5698f426b2..392204a08e96 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -45,6 +45,7 @@ properties:
     maxItems: 2
 
   interconnect-names:
+    minItems: 1
     items:
       - const: qspi-config
       - const: qspi-memory
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index 9787be21318e..82d0ca5c00f3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -49,6 +49,13 @@ properties:
     enum: [ 0, 1 ]
     default: 0
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index ea72c8001256..fafde1c06be6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -30,6 +30,13 @@ properties:
   clocks:
     maxItems: 2
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index a07de5ed0ca6..2d34f3ccb257 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index dc9d6ed0781d..5d0bfea2c087 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -64,7 +64,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 8913497624de..cb5da1df8d40 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -135,7 +135,8 @@ properties:
       Phandle of a companion.
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index acbf94fa5f74..d5fd3aa53ed2 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -102,7 +102,8 @@ properties:
       Overrides the detected port count
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 11f7bacd4e2b..620cbf00bedb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -56,6 +56,7 @@ properties:
       - description: optional, wakeup interrupt used to support runtime PM
 
   interrupt-names:
+    minItems: 1
     items:
       - const: host
       - const: wakeup
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 078fb7889593..5d1e49d823c9 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -240,7 +240,7 @@ properties:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
-    $ref: /schemas/types.yaml#/definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/string
     enum: [utmi, ulpi]
 
   snps,quirk-frame-length-adjustment:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 56853c17af66..1dc3d5d7b44f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -33,7 +33,7 @@ patternProperties:
   "^.*@[0-9a-f]{1,2}$":
     description: The hard wired USB devices
     type: object
-    $ref: /usb/usb-device.yaml
+    $ref: /schemas/usb/usb-device.yaml
 
 additionalProperties: true
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..93cd77a6e92c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420 and Exynos7).
 
 required:
   - compatible
@@ -58,6 +58,7 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
     then:
       required:
         - samsung,syscon-phandle
diff --git linux-libre-5.15-gnu/Documentation/devicetree/overlay-notes.rst linux-libre-5.15.126-gnu/Documentation/devicetree/overlay-notes.rst
index b2b8db765b8c..e139f22b363e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/overlay-notes.rst
+++ linux-libre-5.15.126-gnu/Documentation/devicetree/overlay-notes.rst
@@ -119,10 +119,32 @@ Finally, if you need to remove all overlays in one-go, just call
 of_overlay_remove_all() which will remove every single one in the correct
 order.
 
-In addition, there is the option to register notifiers that get called on
+There is the option to register notifiers that get called on
 overlay operations. See of_overlay_notifier_register/unregister and
 enum of_overlay_notify_action for details.
 
-Note that a notifier callback is not supposed to store pointers to a device
-tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
-respective node it received.
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE.  The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called.  Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay.  These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content.  The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data.  Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.
diff --git linux-libre-5.15-gnu/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.15.126-gnu/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.15.126-gnu/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.15-gnu/Documentation/driver-api/firewire.rst linux-libre-5.15.126-gnu/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/firewire.rst
+++ linux-libre-5.15.126-gnu/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.15-gnu/Documentation/driver-api/firmware/other_interfaces.rst linux-libre-5.15.126-gnu/Documentation/driver-api/firmware/other_interfaces.rst
index b81794e0cfbb..06ac89adaafb 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/firmware/other_interfaces.rst
+++ linux-libre-5.15.126-gnu/Documentation/driver-api/firmware/other_interfaces.rst
@@ -13,6 +13,12 @@ EDD Interfaces
 .. kernel-doc:: drivers/firmware/edd.c
    :internal:
 
+Generic System Framebuffers Interface
+-------------------------------------
+
+.. kernel-doc:: drivers/firmware/sysfb.c
+   :export:
+
 Intel Stratix10 SoC Service Layer
 ---------------------------------
 Some features of the Intel Stratix10 SoC require a level of privilege
diff --git linux-libre-5.15-gnu/Documentation/driver-api/generic-counter.rst linux-libre-5.15.126-gnu/Documentation/driver-api/generic-counter.rst
index 64fe7db080e5..252aeb639bc4 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/generic-counter.rst
+++ linux-libre-5.15.126-gnu/Documentation/driver-api/generic-counter.rst
@@ -247,7 +247,7 @@ for defining a counter device.
 .. kernel-doc:: include/linux/counter.h
    :internal:
 
-.. kernel-doc:: drivers/counter/counter.c
+.. kernel-doc:: drivers/counter/counter-core.c
    :export:
 
 Implementation
diff --git linux-libre-5.15-gnu/Documentation/driver-api/spi.rst linux-libre-5.15.126-gnu/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/spi.rst
+++ linux-libre-5.15.126-gnu/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-5.15-gnu/Documentation/fault-injection/fault-injection.rst linux-libre-5.15.126-gnu/Documentation/fault-injection/fault-injection.rst
index 4a25c5eb6f07..8c47847755a6 100644
--- linux-libre-5.15-gnu/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-5.15.126-gnu/Documentation/fault-injection/fault-injection.rst
@@ -83,9 +83,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most. A value of -1
-	means "no limit". Note, though, that this file only accepts unsigned
-	values. So, if you want to specify -1, you better use 'printf' instead
-	of 'echo', e.g.: $ printf %#x -1 > times
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -277,7 +275,7 @@ Application Examples
     echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -331,7 +329,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -362,7 +360,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
 
diff --git linux-libre-5.15-gnu/Documentation/filesystems/autofs-mount-control.rst linux-libre-5.15.126-gnu/Documentation/filesystems/autofs-mount-control.rst
index bf4b511cdbe8..b5a379d25c40 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/autofs-mount-control.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/autofs-mount-control.rst
@@ -196,7 +196,7 @@ information and return operation results::
 		    struct args_ismountpoint	ismountpoint;
 	    };
 
-	    char path[0];
+	    char path[];
     };
 
 The ioctlfd field is a mount point file descriptor of an autofs mount
diff --git linux-libre-5.15-gnu/Documentation/filesystems/autofs.rst linux-libre-5.15.126-gnu/Documentation/filesystems/autofs.rst
index 681c6a492bc0..1b495768e7aa 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/autofs.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/autofs.rst
@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 			struct args_ismountpoint	ismountpoint;
 		};
 
-                char path[0];
+                char path[];
         };
 
 For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target
diff --git linux-libre-5.15-gnu/Documentation/filesystems/directory-locking.rst linux-libre-5.15.126-gnu/Documentation/filesystems/directory-locking.rst
index 504ba940c36c..dccd61c7c5c3 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/directory-locking.rst
@@ -22,12 +22,11 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
+parent and finds source and target.  We lock both (provided they exist).  If we
+need to lock two inodes of different type (dir vs non-dir), we lock directory
+first.  If we need to lock two inodes of the same type, lock them in inode
+pointer order.  Then call the method.  All locks are exclusive.
 NB: we might get away with locking the source (and target in exchange
 case) shared.
 
@@ -44,15 +43,17 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock them in inode pointer order.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock both the source and the target provided they exist. If we
+	  need to lock two inodes of different type (dir vs non-dir), we lock
+	  the directory first. If we need to lock two inodes of the same type,
+	  lock them in inode pointer order.
 	* call the method.
 
 All ->i_rwsem are taken exclusive.  Again, we might get away with locking
@@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git linux-libre-5.15-gnu/Documentation/filesystems/ext4/attributes.rst linux-libre-5.15.126-gnu/Documentation/filesystems/ext4/attributes.rst
index 54386a010a8d..871d2da7a0a9 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/ext4/attributes.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/ext4/attributes.rst
@@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
diff --git linux-libre-5.15-gnu/Documentation/filesystems/f2fs.rst linux-libre-5.15.126-gnu/Documentation/filesystems/f2fs.rst
index 09de6ebbbdfa..7fe50b0bccde 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/f2fs.rst
@@ -197,6 +197,7 @@ fault_type=%d		 Support configuring fault injection type, should be
 			 FAULT_DISCARD		  0x000002000
 			 FAULT_WRITE_IO		  0x000004000
 			 FAULT_SLAB_ALLOC	  0x000008000
+			 FAULT_DQUOT_INIT	  0x000010000
 			 ===================	  ===========
 mode=%s			 Control block allocation mode which supports "adaptive"
 			 and "lfs". In "lfs" mode, there should be no random
diff --git linux-libre-5.15-gnu/Documentation/filesystems/fscrypt.rst linux-libre-5.15.126-gnu/Documentation/filesystems/fscrypt.rst
index 0eb799d9d05a..7940a45d3952 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
 
 Each encrypted directory tree is protected by a *master key*.  Master
 keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used.  For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits).  Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used.  For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes.  A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
 
 To "unlock" an encrypted directory tree, userspace must provide the
 appropriate master key.  There can be any number of master keys, each
diff --git linux-libre-5.15-gnu/Documentation/filesystems/idmappings.rst linux-libre-5.15.126-gnu/Documentation/filesystems/idmappings.rst
index 1229a75ec75d..7a879ec3b6bf 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/idmappings.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/idmappings.rst
@@ -952,75 +952,3 @@ The raw userspace id that is put on disk is ``u1000`` so when the user takes
 their home directory back to their home computer where they are assigned
 ``u1000`` using the initial idmapping and mount the filesystem with the initial
 idmapping they will see all those files owned by ``u1000``.
-
-Shortcircuting
---------------
-
-Currently, the implementation of idmapped mounts enforces that the filesystem
-is mounted with the initial idmapping. The reason is simply that none of the
-filesystems that we targeted were mountable with a non-initial idmapping. But
-that might change soon enough. As we've seen above, thanks to the properties of
-idmappings the translation works for both filesystems mounted with the initial
-idmapping and filesystem with non-initial idmappings.
-
-Based on this current restriction to filesystem mounted with the initial
-idmapping two noticeable shortcuts have been taken:
-
-1. We always stash a reference to the initial user namespace in ``struct
-   vfsmount``. Idmapped mounts are thus mounts that have a non-initial user
-   namespace attached to them.
-
-   In order to support idmapped mounts this needs to be changed. Instead of
-   stashing the initial user namespace the user namespace the filesystem was
-   mounted with must be stashed. An idmapped mount is then any mount that has
-   a different user namespace attached then the filesystem was mounted with.
-   This has no user-visible consequences.
-
-2. The translation algorithms in ``mapped_fs*id()`` and ``i_*id_into_mnt()``
-   are simplified.
-
-   Let's consider ``mapped_fs*id()`` first. This function translates the
-   caller's kernel id into a kernel id in the filesystem's idmapping via
-   a mount's idmapping. The full algorithm is::
-
-    mapped_fsuid(kid):
-      /* Map the kernel id up into a userspace id in the mount's idmapping. */
-      from_kuid(mount-idmapping, kid) = uid
-
-      /* Map the userspace id down into a kernel id in the filesystem's idmapping. */
-      make_kuid(filesystem-idmapping, uid) = kuid
-
-   We know that the filesystem is always mounted with the initial idmapping as
-   we enforce this in ``mount_setattr()``. So this can be shortened to::
-
-    mapped_fsuid(kid):
-      /* Map the kernel id up into a userspace id in the mount's idmapping. */
-      from_kuid(mount-idmapping, kid) = uid
-
-      /* Map the userspace id down into a kernel id in the filesystem's idmapping. */
-      KUIDT_INIT(uid) = kuid
-
-   Similarly, for ``i_*id_into_mnt()`` which translated the filesystem's kernel
-   id into a mount's kernel id::
-
-    i_uid_into_mnt(kid):
-      /* Map the kernel id up into a userspace id in the filesystem's idmapping. */
-      from_kuid(filesystem-idmapping, kid) = uid
-
-      /* Map the userspace id down into a kernel id in the mounts's idmapping. */
-      make_kuid(mount-idmapping, uid) = kuid
-
-   Again, we know that the filesystem is always mounted with the initial
-   idmapping as we enforce this in ``mount_setattr()``. So this can be
-   shortened to::
-
-    i_uid_into_mnt(kid):
-      /* Map the kernel id up into a userspace id in the filesystem's idmapping. */
-      __kuid_val(kid) = uid
-
-      /* Map the userspace id down into a kernel id in the mounts's idmapping. */
-      make_kuid(mount-idmapping, uid) = kuid
-
-Handling filesystems mounted with non-initial idmappings requires that the
-translation functions be converted to their full form. They can still be
-shortcircuited on non-idmapped mounts. This has no user-visible consequences.
diff --git linux-libre-5.15-gnu/Documentation/filesystems/vfs.rst linux-libre-5.15.126-gnu/Documentation/filesystems/vfs.rst
index bf5c48066fac..a15527940b46 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-5.15.126-gnu/Documentation/filesystems/vfs.rst
@@ -274,6 +274,9 @@ or bottom half).
 	This is specifically for the inode itself being marked dirty,
 	not its data.  If the update needs to be persisted by fdatasync(),
 	then I_DIRTY_DATASYNC will be set in the flags argument.
+	I_DIRTY_TIME will be set in the flags in case lazytime is enabled
+	and struct inode has times updated since the last ->dirty_inode
+	call.
 
 ``write_inode``
 	this method is called when the VFS needs to write an inode to
@@ -1207,7 +1210,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/apei/einj.rst linux-libre-5.15.126-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
index c042176e1707..50ac87fa2295 100644
--- linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
+++ linux-libre-5.15.126-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -168,7 +168,7 @@ An error injection example::
   0x00000008	Memory Correctable
   0x00000010	Memory Uncorrectable non-fatal
   # echo 0x12345000 > param1		# Set memory address for injection
-  # echo $((-1 << 12)) > param2		# Mask 0xfffffffffffff000 - anywhere in this page
+  # echo 0xfffffffffffff000 > param2		# Mask - anywhere in this page
   # echo 0x8 > error_type			# Choose correctable memory error
   # echo 1 > error_inject			# Inject now
 
diff --git linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.15.126-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index b7ad47df49de..8b65b32e6e40 100644
--- linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.15.126-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.15-gnu/Documentation/gpu/i915.rst linux-libre-5.15.126-gnu/Documentation/gpu/i915.rst
index 204ebdaadb45..03021dfa0dd8 100644
--- linux-libre-5.15-gnu/Documentation/gpu/i915.rst
+++ linux-libre-5.15.126-gnu/Documentation/gpu/i915.rst
@@ -183,25 +183,25 @@ Frame Buffer Compression (FBC)
 Display Refresh Rate Switching (DRRS)
 -------------------------------------
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :doc: Display Refresh Rate Switching (DRRS)
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_dp_set_drrs_state
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_enable
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_disable
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_invalidate
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_flush
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_dp_drrs_init
 
 DPIO
diff --git linux-libre-5.15-gnu/Documentation/gpu/todo.rst linux-libre-5.15.126-gnu/Documentation/gpu/todo.rst
index 12e61869939e..67de1e94fdf7 100644
--- linux-libre-5.15-gnu/Documentation/gpu/todo.rst
+++ linux-libre-5.15.126-gnu/Documentation/gpu/todo.rst
@@ -311,27 +311,6 @@ Contact: Daniel Vetter, Noralf Tronnes
 
 Level: Advanced
 
-Garbage collect fbdev scrolling acceleration
---------------------------------------------
-
-Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode =
-SCROLL_REDRAW. There's a ton of code this will allow us to remove:
-
-- lots of code in fbcon.c
-
-- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called
-  directly instead of the function table (with a switch on p->rotate)
-
-- fb_copyarea is unused after this, and can be deleted from all drivers
-
-Note that not all acceleration code can be deleted, since clearing and cursor
-support is still accelerated, which might be good candidates for further
-deletion projects.
-
-Contact: Daniel Vetter
-
-Level: Intermediate
-
 idr_init_base()
 ---------------
 
diff --git linux-libre-5.15-gnu/Documentation/hwmon/ftsteutates.rst linux-libre-5.15.126-gnu/Documentation/hwmon/ftsteutates.rst
index 58a2483d8d0d..198fa8e2819d 100644
--- linux-libre-5.15-gnu/Documentation/hwmon/ftsteutates.rst
+++ linux-libre-5.15.126-gnu/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 8 fans. It also contains an integrated watchdog which is currently
 implemented in this driver.
 
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
 To clear a temperature or fan alarm, execute the following command with the
 correct path to the alarm file::
 
diff --git linux-libre-5.15-gnu/Documentation/hwmon/lm90.rst linux-libre-5.15.126-gnu/Documentation/hwmon/lm90.rst
index 3da8c6e06a36..05391fb4042d 100644
--- linux-libre-5.15-gnu/Documentation/hwmon/lm90.rst
+++ linux-libre-5.15.126-gnu/Documentation/hwmon/lm90.rst
@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
diff --git linux-libre-5.15-gnu/Documentation/input/joydev/joystick.rst linux-libre-5.15.126-gnu/Documentation/input/joydev/joystick.rst
index f615906a0821..6d721396717a 100644
--- linux-libre-5.15-gnu/Documentation/input/joydev/joystick.rst
+++ linux-libre-5.15.126-gnu/Documentation/input/joydev/joystick.rst
@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
 * AVB Mag Turbo Force
 * AVB Top Shot Pegasus
 * AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
 * Logitech WingMan Force
 * Logitech WingMan Force Wheel
 * Guillemot Race Leader Force Feedback
diff --git linux-libre-5.15-gnu/Documentation/kernel-hacking/locking.rst linux-libre-5.15.126-gnu/Documentation/kernel-hacking/locking.rst
index 90bc3f51eda9..d431718921b7 100644
--- linux-libre-5.15-gnu/Documentation/kernel-hacking/locking.rst
+++ linux-libre-5.15.126-gnu/Documentation/kernel-hacking/locking.rst
@@ -1352,7 +1352,7 @@ Mutex API reference
 Futex API reference
 ===================
 
-.. kernel-doc:: kernel/futex.c
+.. kernel-doc:: kernel/futex/core.c
    :internal:
 
 Further reading
diff --git linux-libre-5.15-gnu/Documentation/locking/locktypes.rst linux-libre-5.15.126-gnu/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- linux-libre-5.15-gnu/Documentation/locking/locktypes.rst
+++ linux-libre-5.15.126-gnu/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git linux-libre-5.15-gnu/Documentation/networking/af_xdp.rst linux-libre-5.15.126-gnu/Documentation/networking/af_xdp.rst
index 60b217b436be..5b77b9e5ac7e 100644
--- linux-libre-5.15-gnu/Documentation/networking/af_xdp.rst
+++ linux-libre-5.15.126-gnu/Documentation/networking/af_xdp.rst
@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
 application to use. The final option is the flags field, but it will
 be dealt with in separate sections for each UMEM flag.
 
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
 XDP_STATISTICS getsockopt
 -------------------------
 
diff --git linux-libre-5.15-gnu/Documentation/networking/bonding.rst linux-libre-5.15.126-gnu/Documentation/networking/bonding.rst
index 31cfd7d674a6..ab98373535ea 100644
--- linux-libre-5.15-gnu/Documentation/networking/bonding.rst
+++ linux-libre-5.15.126-gnu/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
@@ -421,6 +422,17 @@ arp_all_targets
 		consider the slave up only when all of the arp_ip_targets
 		are reachable
 
+arp_missed_max
+
+	Specifies the number of arp_interval monitor checks that must
+	fail in order for an interface to be marked down by the ARP monitor.
+
+	In order to provide orderly failover semantics, backup interfaces
+	are permitted an extra monitor check (i.e., they must fail
+	arp_missed_max + 1 times before being marked down).
+
+	The default value is 2, and the allowable range is 1 - 255.
+
 downdelay
 
 	Specifies the time, in milliseconds, to wait before disabling
diff --git linux-libre-5.15-gnu/Documentation/networking/decnet.rst linux-libre-5.15.126-gnu/Documentation/networking/decnet.rst
deleted file mode 100644
index b8bc11ff8370..000000000000
--- linux-libre-5.15-gnu/Documentation/networking/decnet.rst
+++ /dev/null
@@ -1,243 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=========================================
-Linux DECnet Networking Layer Information
-=========================================
-
-1. Other documentation....
-==========================
-
-   - Project Home Pages
-     - http://www.chygwyn.com/				   - Kernel info
-     - http://linux-decnet.sourceforge.net/                - Userland tools
-     - http://www.sourceforge.net/projects/linux-decnet/   - Status page
-
-2. Configuring the kernel
-=========================
-
-Be sure to turn on the following options:
-
-    - CONFIG_DECNET (obviously)
-    - CONFIG_PROC_FS (to see what's going on)
-    - CONFIG_SYSCTL (for easy configuration)
-
-if you want to try out router support (not properly debugged yet)
-you'll need the following options as well...
-
-    - CONFIG_DECNET_ROUTER (to be able to add/delete routes)
-    - CONFIG_NETFILTER (will be required for the DECnet routing daemon)
-
-Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
-that you need it, in general you won't and it can cause ifconfig to
-malfunction.
-
-Run time configuration has changed slightly from the 2.4 system. If you
-want to configure an endnode, then the simplified procedure is as follows:
-
- - Set the MAC address on your ethernet card before starting _any_ other
-   network protocols.
-
-As soon as your network card is brought into the UP state, DECnet should
-start working. If you need something more complicated or are unsure how
-to set the MAC address, see the next section. Also all configurations which
-worked with 2.4 will work under 2.5 with no change.
-
-3. Command line options
-=======================
-
-You can set a DECnet address on the kernel command line for compatibility
-with the 2.4 configuration procedure, but in general it's not needed any more.
-If you do st a DECnet address on the command line, it has only one purpose
-which is that its added to the addresses on the loopback device.
-
-With 2.4 kernels, DECnet would only recognise addresses as local if they
-were added to the loopback device. In 2.5, any local interface address
-can be used to loop back to the local machine. Of course this does not
-prevent you adding further addresses to the loopback device if you
-want to.
-
-N.B. Since the address list of an interface determines the addresses for
-which "hello" messages are sent, if you don't set an address on the loopback
-interface then you won't see any entries in /proc/net/neigh for the local
-host until such time as you start a connection. This doesn't affect the
-operation of the local communications in any other way though.
-
-The kernel command line takes options looking like the following::
-
-    decnet.addr=1,2
-
-the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
-and early 2.3.xx kernels, you must use a comma when specifying the
-DECnet address like this. For more recent 2.3.xx kernels, you may
-use almost any character except space, although a `.` would be the most
-obvious choice :-)
-
-There used to be a third number specifying the node type. This option
-has gone away in favour of a per interface node type. This is now set
-using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
-set with a single digit, 0=EndNode, 1=L1 Router and  2=L2 Router.
-
-There are also equivalent options for modules. The node address can
-also be set through the /proc/sys/net/decnet/ files, as can other system
-parameters.
-
-Currently the only supported devices are ethernet and ip_gre. The
-ethernet address of your ethernet card has to be set according to the DECnet
-address of the node in order for it to be autoconfigured (and then appear in
-/proc/net/decnet_dev). There is a utility available at the above
-FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before or
-at the time the device is brought up. If you are using RedHat you can
-add the line::
-
-    MACADDR=AA:00:04:00:03:04
-
-or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or
-wherever your network card's configuration lives. Setting the MAC address
-of your ethernet card to an address starting with "hi-ord" will cause a
-DECnet address which matches to be added to the interface (which you can
-verify with iproute2).
-
-The default device for routing can be set through the /proc filesystem
-by setting /proc/sys/net/decnet/default_device to the
-device you want DECnet to route packets out of when no specific route
-is available. Usually this will be eth0, for example::
-
-    echo -n "eth0" >/proc/sys/net/decnet/default_device
-
-If you don't set the default device, then it will default to the first
-ethernet card which has been autoconfigured as described above. You can
-confirm that by looking in the default_device file of course.
-
-There is a list of what the other files under /proc/sys/net/decnet/ do
-on the kernel patch web site (shown above).
-
-4. Run time kernel configuration
-================================
-
-
-This is either done through the sysctl/proc interface (see the kernel web
-pages for details on what the various options do) or through the iproute2
-package in the same way as IPv4/6 configuration is performed.
-
-Documentation for iproute2 is included with the package, although there is
-as yet no specific section on DECnet, most of the features apply to both
-IP and DECnet, albeit with DECnet addresses instead of IP addresses and
-a reduced functionality.
-
-If you want to configure a DECnet router you'll need the iproute2 package
-since its the _only_ way to add and delete routes currently. Eventually
-there will be a routing daemon to send and receive routing messages for
-each interface and update the kernel routing tables accordingly. The
-routing daemon will use netfilter to listen to routing packets, and
-rtnetlink to update the kernels routing tables.
-
-The DECnet raw socket layer has been removed since it was there purely
-for use by the routing daemon which will now use netfilter (a much cleaner
-and more generic solution) instead.
-
-5. How can I tell if its working?
-=================================
-
-Here is a quick guide of what to look for in order to know if your DECnet
-kernel subsystem is working.
-
-   - Is the node address set (see /proc/sys/net/decnet/node_address)
-   - Is the node of the correct type
-     (see /proc/sys/net/decnet/conf/<dev>/forwarding)
-   - Is the Ethernet MAC address of each Ethernet card set to match
-     the DECnet address. If in doubt use the dn2ethaddr utility available
-     at the ftp archive.
-   - If the previous two steps are satisfied, and the Ethernet card is up,
-     you should find that it is listed in /proc/net/decnet_dev and also
-     that it appears as a directory in /proc/sys/net/decnet/conf/. The
-     loopback device (lo) should also appear and is required to communicate
-     within a node.
-   - If you have any DECnet routers on your network, they should appear
-     in /proc/net/decnet_neigh, otherwise this file will only contain the
-     entry for the node itself (if it doesn't check to see if lo is up).
-   - If you want to send to any node which is not listed in the
-     /proc/net/decnet_neigh file, you'll need to set the default device
-     to point to an Ethernet card with connection to a router. This is
-     again done with the /proc/sys/net/decnet/default_device file.
-   - Try starting a simple server and client, like the dnping/dnmirror
-     over the loopback interface. With luck they should communicate.
-     For this step and those after, you'll need the DECnet library
-     which can be obtained from the above ftp sites as well as the
-     actual utilities themselves.
-   - If this seems to work, then try talking to a node on your local
-     network, and see if you can obtain the same results.
-   - At this point you are on your own... :-)
-
-6. How to send a bug report
-===========================
-
-If you've found a bug and want to report it, then there are several things
-you can do to help me work out exactly what it is that is wrong. Useful
-information (_most_ of which _is_ _essential_) includes:
-
- - What kernel version are you running ?
- - What version of the patch are you running ?
- - How far though the above set of tests can you get ?
- - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ?
- - Which services are you running ?
- - Which client caused the problem ?
- - How much data was being transferred ?
- - Was the network congested ?
- - How can the problem be reproduced ?
- - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of
-   tcpdump don't understand how to dump DECnet properly, so including
-   the hex listing of the packet contents is _essential_, usually the -x flag.
-   You may also need to increase the length grabbed with the -s flag. The
-   -e flag also provides very useful information (ethernet MAC addresses))
-
-7. MAC FAQ
-==========
-
-A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet
-interact and how to get the best performance from your hardware.
-
-Ethernet cards are designed to normally only pass received network frames
-to a host computer when they are addressed to it, or to the broadcast address.
-
-Linux has an interface which allows the setting of extra addresses for
-an ethernet card to listen to. If the ethernet card supports it, the
-filtering operation will be done in hardware, if not the extra unwanted packets
-received will be discarded by the host computer. In the latter case,
-significant processor time and bus bandwidth can be used up on a busy
-network (see the NAPI documentation for a longer explanation of these
-effects).
-
-DECnet makes use of this interface to allow running DECnet on an ethernet
-card which has already been configured using TCP/IP (presumably using the
-built in MAC address of the card, as usual) and/or to allow multiple DECnet
-addresses on each physical interface. If you do this, be aware that if your
-ethernet card doesn't support perfect hashing in its MAC address filter
-then your computer will be doing more work than required. Some cards
-will simply set themselves into promiscuous mode in order to receive
-packets from the DECnet specified addresses. So if you have one of these
-cards its better to set the MAC address of the card as described above
-to gain the best efficiency. Better still is to use a card which supports
-NAPI as well.
-
-
-8. Mailing list
-===============
-
-If you are keen to get involved in development, or want to ask questions
-about configuration, or even just report bugs, then there is a mailing
-list that you can join, details are at:
-
-http://sourceforge.net/mail/?group_id=4993
-
-9. Legal Info
-=============
-
-The Linux DECnet project team have placed their code under the GPL. The
-software is provided "as is" and without warranty express or implied.
-DECnet is a trademark of Compaq. This software is not a product of
-Compaq. We acknowledge the help of people at Compaq in providing extra
-documentation above and beyond what was previously publicly available.
-
-Steve Whitehouse <SteveW@ACM.org>
-
diff --git linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst linux-libre-5.15.126-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ linux-libre-5.15.126-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git linux-libre-5.15-gnu/Documentation/networking/index.rst linux-libre-5.15.126-gnu/Documentation/networking/index.rst
index 58bc8cd367c6..fdfc73d4c90a 100644
--- linux-libre-5.15-gnu/Documentation/networking/index.rst
+++ linux-libre-5.15.126-gnu/Documentation/networking/index.rst
@@ -46,7 +46,6 @@ Contents:
    cdc_mbim
    dccp
    dctcp
-   decnet
    dns_resolver
    driver
    eql
diff --git linux-libre-5.15-gnu/Documentation/networking/ip-sysctl.rst linux-libre-5.15.126-gnu/Documentation/networking/ip-sysctl.rst
index d91ab28718d4..7890b395e629 100644
--- linux-libre-5.15-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-5.15.126-gnu/Documentation/networking/ip-sysctl.rst
@@ -322,6 +322,8 @@ tcp_app_win - INTEGER
 	Reserve max(window/2^tcp_app_win, mss) of window for application
 	buffer. Value 0 is special, it means that nothing is reserved.
 
+	Possible values are [0, 31], inclusive.
+
 	Default: 31
 
 tcp_autocorking - BOOLEAN
@@ -1063,7 +1065,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -1157,7 +1159,7 @@ ip_autobind_reuse - BOOLEAN
 	option should only be set by experts.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
@@ -2808,7 +2810,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
diff --git linux-libre-5.15-gnu/Documentation/networking/ipvs-sysctl.rst linux-libre-5.15.126-gnu/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..1cfbf1add2fc 100644
--- linux-libre-5.15-gnu/Documentation/networking/ipvs-sysctl.rst
+++ linux-libre-5.15.126-gnu/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.15-gnu/Documentation/process/code-of-conduct-interpretation.rst linux-libre-5.15.126-gnu/Documentation/process/code-of-conduct-interpretation.rst
index e899f14a4ba2..43da2cc2e3b9 100644
--- linux-libre-5.15-gnu/Documentation/process/code-of-conduct-interpretation.rst
+++ linux-libre-5.15.126-gnu/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the
diff --git linux-libre-5.15-gnu/Documentation/process/deprecated.rst linux-libre-5.15.126-gnu/Documentation/process/deprecated.rst
index 8ced754a5a0f..f3484f60eae5 100644
--- linux-libre-5.15-gnu/Documentation/process/deprecated.rst
+++ linux-libre-5.15.126-gnu/Documentation/process/deprecated.rst
@@ -70,6 +70,9 @@ Instead, the 2-factor form of the allocator should be used::
 
 	foo = kmalloc_array(count, size, GFP_KERNEL);
 
+Specifically, kmalloc() can be replaced with kmalloc_array(), and
+kzalloc() can be replaced with kcalloc().
+
 If no 2-factor form is available, the saturate-on-overflow helpers should
 be used::
 
@@ -90,9 +93,20 @@ Instead, use the helper::
         array usage and switch to a `flexible array member
         <#zero-length-and-one-element-arrays>`_ instead.
 
-See array_size(), array3_size(), and struct_size(),
-for more details as well as the related check_add_overflow() and
-check_mul_overflow() family of functions.
+For other calculations, please compose the use of the size_mul(),
+size_add(), and size_sub() helpers. For example, in the case of::
+
+	foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL);
+
+Instead, use the helpers::
+
+	foo = krealloc(size_add(current_size,
+				size_mul(chunk_size,
+					 size_sub(count, 3))), GFP_KERNEL);
+
+For more details, also see array3_size() and flex_array_size(),
+as well as the related check_mul_overflow(), check_add_overflow(),
+check_sub_overflow(), and check_shl_overflow() family of functions.
 
 simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull()
 ----------------------------------------------------------------------
diff --git linux-libre-5.15-gnu/Documentation/process/stable-kernel-rules.rst linux-libre-5.15.126-gnu/Documentation/process/stable-kernel-rules.rst
index 003c865e9c21..fbcb48bc2a90 100644
--- linux-libre-5.15-gnu/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.15.126-gnu/Documentation/process/stable-kernel-rules.rst
@@ -168,7 +168,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee
diff --git linux-libre-5.15-gnu/Documentation/process/submitting-patches.rst linux-libre-5.15.126-gnu/Documentation/process/submitting-patches.rst
index 8ad6b93f91e6..025272139539 100644
--- linux-libre-5.15-gnu/Documentation/process/submitting-patches.rst
+++ linux-libre-5.15.126-gnu/Documentation/process/submitting-patches.rst
@@ -72,7 +72,7 @@ as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
diff --git linux-libre-5.15-gnu/Documentation/riscv/vm-layout.rst linux-libre-5.15.126-gnu/Documentation/riscv/vm-layout.rst
index b7f98930d38d..a2ec11da38b0 100644
--- linux-libre-5.15-gnu/Documentation/riscv/vm-layout.rst
+++ linux-libre-5.15.126-gnu/Documentation/riscv/vm-layout.rst
@@ -48,7 +48,7 @@ RISC-V Linux Kernel SV39
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
    ffffffc000000000 | -256    GB | ffffffc7ffffffff |   32 GB | kasan
-   ffffffcefee00000 | -196    GB | ffffffcefeffffff |    2 MB | fixmap
+   ffffffcefea00000 | -196    GB | ffffffcefeffffff |    6 MB | fixmap
    ffffffceff000000 | -196    GB | ffffffceffffffff |   16 MB | PCI io
    ffffffcf00000000 | -196    GB | ffffffcfffffffff |    4 GB | vmemmap
    ffffffd000000000 | -192    GB | ffffffdfffffffff |   64 GB | vmalloc/ioremap space
diff --git linux-libre-5.15-gnu/Documentation/sound/alsa-configuration.rst linux-libre-5.15.126-gnu/Documentation/sound/alsa-configuration.rst
index bfeb14de6489..9b5351079a23 100644
--- linux-libre-5.15-gnu/Documentation/sound/alsa-configuration.rst
+++ linux-libre-5.15.126-gnu/Documentation/sound/alsa-configuration.rst
@@ -2237,7 +2237,7 @@ implicit_fb
     Apply the generic implicit feedback sync mode.  When this is set
     and the playback stream sync mode is ASYNC, the driver tries to
     tie an adjacent ASYNC capture stream as the implicit feedback
-    source.
+    source.  This is equivalent with quirk_flags bit 17.
 use_vmalloc
     Use vmalloc() for allocations of the PCM buffers (default: yes).
     For architectures with non-coherent memory like ARM or MIPS, the
@@ -2279,6 +2279,8 @@ quirk_flags
         * bit 14: Ignore errors for mixer access
         * bit 15: Support generic DSD raw U32_BE format
         * bit 16: Set up the interface at first like UAC1
+        * bit 17: Apply the generic implicit feedback sync mode
+        * bit 18: Don't apply implicit feedback sync mode
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git linux-libre-5.15-gnu/Documentation/sound/hd-audio/models.rst linux-libre-5.15.126-gnu/Documentation/sound/hd-audio/models.rst
index 0ea967d34583..120430450014 100644
--- linux-libre-5.15-gnu/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.15.126-gnu/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
@@ -326,6 +330,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======
@@ -698,7 +704,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
diff --git linux-libre-5.15-gnu/Documentation/sphinx/load_config.py linux-libre-5.15.126-gnu/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-5.15-gnu/Documentation/sphinx/load_config.py
+++ linux-libre-5.15.126-gnu/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-5.15-gnu/Documentation/sphinx/requirements.txt linux-libre-5.15.126-gnu/Documentation/sphinx/requirements.txt
index 9a35f50798a6..2c573541ab71 100644
--- linux-libre-5.15-gnu/Documentation/sphinx/requirements.txt
+++ linux-libre-5.15.126-gnu/Documentation/sphinx/requirements.txt
@@ -1,2 +1,4 @@
+# jinja2>=3.1 is not compatible with Sphinx<4.0
+jinja2<3.1
 sphinx_rtd_theme
 Sphinx==2.4.4
diff --git linux-libre-5.15-gnu/Documentation/trace/coresight/coresight-config.rst linux-libre-5.15.126-gnu/Documentation/trace/coresight/coresight-config.rst
index a4e3ef295240..6ed13398ca2c 100644
--- linux-libre-5.15-gnu/Documentation/trace/coresight/coresight-config.rst
+++ linux-libre-5.15.126-gnu/Documentation/trace/coresight/coresight-config.rst
@@ -211,19 +211,13 @@ also declared in the perf 'cs_etm' event infrastructure so that they can
 be selected when running trace under perf::
 
     $ ls /sys/devices/cs_etm
-    configurations  format  perf_event_mux_interval_ms  sinks  type
-    events  nr_addr_filters  power
+    cpu0  cpu2  events  nr_addr_filters		power  subsystem  uevent
+    cpu1  cpu3  format  perf_event_mux_interval_ms	sinks  type
 
-Key directories here are 'configurations' - which lists the loaded
-configurations, and 'events' - a generic perf directory which allows
-selection on the perf command line.::
+The key directory here is 'events' - a generic perf directory which allows
+selection on the perf command line. As with the sinks entries, this provides
+a hash of the configuration name.
 
-    $ ls configurations/
-    autofdo
-    $ cat configurations/autofdo
-    0xa7c3dddd
-
-As with the sinks entries, this provides a hash of the configuration name.
 The entry in the 'events' directory uses perfs built in syntax generator
 to substitute the syntax for the name when evaluating the command::
 
diff --git linux-libre-5.15-gnu/Documentation/trace/events.rst linux-libre-5.15.126-gnu/Documentation/trace/events.rst
index 8ddb9b09451c..c47f381d0c00 100644
--- linux-libre-5.15-gnu/Documentation/trace/events.rst
+++ linux-libre-5.15.126-gnu/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 
diff --git linux-libre-5.15-gnu/Documentation/trace/ftrace.rst linux-libre-5.15.126-gnu/Documentation/trace/ftrace.rst
index 4e5b26f03d5b..d036946bce7a 100644
--- linux-libre-5.15-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-5.15.126-gnu/Documentation/trace/ftrace.rst
@@ -2929,7 +2929,7 @@ Produces::
               bash-1994  [000] ....  4342.324898: ima_get_action <-process_measurement
               bash-1994  [000] ....  4342.324898: ima_match_policy <-ima_get_action
               bash-1994  [000] ....  4342.324899: do_truncate <-do_last
-              bash-1994  [000] ....  4342.324899: should_remove_suid <-do_truncate
+              bash-1994  [000] ....  4342.324899: setattr_should_drop_suidgid <-do_truncate
               bash-1994  [000] ....  4342.324899: notify_change <-do_truncate
               bash-1994  [000] ....  4342.324900: current_fs_time <-notify_change
               bash-1994  [000] ....  4342.324900: current_kernel_time <-current_fs_time
diff --git linux-libre-5.15-gnu/Documentation/trace/histogram.rst linux-libre-5.15.126-gnu/Documentation/trace/histogram.rst
index 533415644c54..a78350a8fed4 100644
--- linux-libre-5.15-gnu/Documentation/trace/histogram.rst
+++ linux-libre-5.15.126-gnu/Documentation/trace/histogram.rst
@@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
   will use the event's kernel stacktrace as the key.  The keywords
   'keys' or 'key' can be used to specify keys, and the keywords
   'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
   keyword.  Hashing a compound key produces a unique entry in the
   table for each unique combination of component keys, and can be
   useful for providing more fine-grained summaries of event data.
diff --git linux-libre-5.15-gnu/Documentation/trace/kprobetrace.rst linux-libre-5.15.126-gnu/Documentation/trace/kprobetrace.rst
index b175d88f31eb..15e4bfa2bd83 100644
--- linux-libre-5.15-gnu/Documentation/trace/kprobetrace.rst
+++ linux-libre-5.15.126-gnu/Documentation/trace/kprobetrace.rst
@@ -58,8 +58,8 @@ Synopsis of kprobe_events
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
 		  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
-		  (x8/x16/x32/x64), "string", "ustring" and bitfield
-		  are supported.
+		  (x8/x16/x32/x64), "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
 
   (\*1) only for the probe on function entry (offs == 0).
   (\*2) only for return probe.
@@ -96,6 +96,10 @@ offset, and container-size (usually 32). The syntax is::
 
 Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
 which shows given pointer in "symbol+offset" style.
+On the other hand, symbol-string type ('symstr') converts the given address to
+"symbol+offset/symbolsize" style and stores it as a null-terminated string.
+With 'symstr' type, you can filter the event with wildcard pattern of the
+symbols, and you don't need to solve symbol name by yourself.
 For $comm, the default type is "string"; any other type is invalid.
 
 .. _user_mem_access:
diff --git linux-libre-5.15-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst linux-libre-5.15.126-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst
index 1efb8293bf1f..9d6387e7b083 100644
--- linux-libre-5.15-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ linux-libre-5.15.126-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -1396,7 +1396,7 @@ Riferimento per l'API dei Mutex
 Riferimento per l'API dei Futex
 ===============================
 
-.. kernel-doc:: kernel/futex.c
+.. kernel-doc:: kernel/futex/core.c
    :internal:
 
 Approfondimenti
diff --git linux-libre-5.15-gnu/Documentation/tty/device_drivers/oxsemi-tornado.rst linux-libre-5.15.126-gnu/Documentation/tty/device_drivers/oxsemi-tornado.rst
new file mode 100644
index 000000000000..0180d8bb0881
--- /dev/null
+++ linux-libre-5.15.126-gnu/Documentation/tty/device_drivers/oxsemi-tornado.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================================================
+Notes on Oxford Semiconductor PCIe (Tornado) 950 serial port devices
+====================================================================
+
+Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven
+by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.
+
+The baud rate produced by the baud generator is obtained from this input
+frequency by dividing it by the clock prescaler, which can be set to any
+value from 1 to 63.875 in increments of 0.125, and then the usual 16-bit
+divisor is used as with the original 8250, to divide the frequency by a
+value from 1 to 65535.  Finally a programmable oversampling rate is used
+that can take any value from 4 to 16 to divide the frequency further and
+determine the actual baud rate used.  Baud rates from 15625000bps down
+to 0.933bps can be obtained this way.
+
+By default the oversampling rate is set to 16 and the clock prescaler is
+set to 33.875, meaning that the frequency to be used as the reference
+for the usual 16-bit divisor is 115313.653, which is close enough to the
+frequency of 115200 used by the original 8250 for the same values to be
+used for the divisor to obtain the requested baud rates by software that
+is unaware of the extra clock controls available.
+
+The oversampling rate is programmed with the TCR register and the clock
+prescaler is programmed with the CPR/CPR2 register pair[1][2][3][4].
+To switch away from the default value of 33.875 for the prescaler the
+the enhanced mode has to be explicitly enabled though, by setting bit 4
+of the EFR.  In that mode setting bit 7 in the MCR enables the prescaler
+or otherwise it is bypassed as if the value of 1 was used.  Additionally
+writing any value to CPR clears CPR2 for compatibility with old software
+written for older conventional PCI Oxford Semiconductor devices that do
+not have the extra prescaler's 9th bit in CPR2, so the CPR/CPR2 register
+pair has to be programmed in the right order.
+
+By using these parameters rates from 15625000bps down to 1bps can be
+obtained, with either exact or highly-accurate actual bit rates for
+standard and many non-standard rates.
+
+Here are the figures for the standard and some non-standard baud rates
+(including those quoted in Oxford Semiconductor documentation), giving
+the requested rate (r), the actual rate yielded (a) and its deviation
+from the requested rate (d), and the values of the oversampling rate
+(tcr), the clock prescaler (cpr) and the divisor (div) produced by the
+new `get_divisor' handler:
+
+r: 15625000, a: 15625000.00, d:  0.0000%, tcr:  4, cpr:  1.000, div:     1
+r: 12500000, a: 12500000.00, d:  0.0000%, tcr:  5, cpr:  1.000, div:     1
+r: 10416666, a: 10416666.67, d:  0.0000%, tcr:  6, cpr:  1.000, div:     1
+r:  8928571, a:  8928571.43, d:  0.0000%, tcr:  7, cpr:  1.000, div:     1
+r:  7812500, a:  7812500.00, d:  0.0000%, tcr:  8, cpr:  1.000, div:     1
+r:  4000000, a:  4000000.00, d:  0.0000%, tcr:  5, cpr:  3.125, div:     1
+r:  3686400, a:  3676470.59, d: -0.2694%, tcr:  8, cpr:  2.125, div:     1
+r:  3500000, a:  3496503.50, d: -0.0999%, tcr: 13, cpr:  1.375, div:     1
+r:  3000000, a:  2976190.48, d: -0.7937%, tcr: 14, cpr:  1.500, div:     1
+r:  2500000, a:  2500000.00, d:  0.0000%, tcr: 10, cpr:  2.500, div:     1
+r:  2000000, a:  2000000.00, d:  0.0000%, tcr: 10, cpr:  3.125, div:     1
+r:  1843200, a:  1838235.29, d: -0.2694%, tcr: 16, cpr:  2.125, div:     1
+r:  1500000, a:  1492537.31, d: -0.4975%, tcr:  5, cpr:  8.375, div:     1
+r:  1152000, a:  1152073.73, d:  0.0064%, tcr: 14, cpr:  3.875, div:     1
+r:   921600, a:   919117.65, d: -0.2694%, tcr: 16, cpr:  2.125, div:     2
+r:   576000, a:   576036.87, d:  0.0064%, tcr: 14, cpr:  3.875, div:     2
+r:   460800, a:   460829.49, d:  0.0064%, tcr:  7, cpr:  3.875, div:     5
+r:   230400, a:   230414.75, d:  0.0064%, tcr: 14, cpr:  3.875, div:     5
+r:   115200, a:   115207.37, d:  0.0064%, tcr: 14, cpr:  1.250, div:    31
+r:    57600, a:    57603.69, d:  0.0064%, tcr:  8, cpr:  3.875, div:    35
+r:    38400, a:    38402.46, d:  0.0064%, tcr: 14, cpr:  3.875, div:    30
+r:    19200, a:    19201.23, d:  0.0064%, tcr:  8, cpr:  3.875, div:   105
+r:     9600, a:     9600.06, d:  0.0006%, tcr:  9, cpr:  1.125, div:   643
+r:     4800, a:     4799.98, d: -0.0004%, tcr:  7, cpr:  2.875, div:   647
+r:     2400, a:     2400.02, d:  0.0008%, tcr:  9, cpr:  2.250, div:  1286
+r:     1200, a:     1200.00, d:  0.0000%, tcr: 14, cpr:  2.875, div:  1294
+r:      300, a:      300.00, d:  0.0000%, tcr: 11, cpr:  2.625, div:  7215
+r:      200, a:      200.00, d:  0.0000%, tcr: 16, cpr:  1.250, div: 15625
+r:      150, a:      150.00, d:  0.0000%, tcr: 13, cpr:  2.250, div: 14245
+r:      134, a:      134.00, d:  0.0000%, tcr: 11, cpr:  2.625, div: 16153
+r:      110, a:      110.00, d:  0.0000%, tcr: 12, cpr:  1.000, div: 47348
+r:       75, a:       75.00, d:  0.0000%, tcr:  4, cpr:  5.875, div: 35461
+r:       50, a:       50.00, d:  0.0000%, tcr: 16, cpr:  1.250, div: 62500
+r:       25, a:       25.00, d:  0.0000%, tcr: 16, cpr:  2.500, div: 62500
+r:        4, a:        4.00, d:  0.0000%, tcr: 16, cpr: 20.000, div: 48828
+r:        2, a:        2.00, d:  0.0000%, tcr: 16, cpr: 40.000, div: 48828
+r:        1, a:        1.00, d:  0.0000%, tcr: 16, cpr: 63.875, div: 61154
+
+With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX
+limitation imposed by `serial8250_get_baud_rate' standard baud rates
+below 300bps become unavailable in the regular way, e.g. the rate of
+200bps requires the baud base to be divided by 78125 and that is beyond
+the unsigned 16-bit range.  The historic spd_cust feature can still be
+used by encoding the values for, the prescaler, the oversampling rate
+and the clock divisor (DLM/DLL) as follows to obtain such rates if so
+required:
+
+ 31 29 28             20 19   16 15                            0
++-----+-----------------+-------+-------------------------------+
+|0 0 0|    CPR2:CPR     |  TCR  |            DLM:DLL            |
++-----+-----------------+-------+-------------------------------+
+
+Use a value such encoded for the `custom_divisor' field along with the
+ASYNC_SPD_CUST flag set in the `flags' field in `struct serial_struct'
+passed with the TIOCSSERIAL ioctl(2), such as with the setserial(8)
+utility and its `divisor' and `spd_cust' parameters, and the select
+the baud rate of 38400bps.  Note that the value of 0 in TCR sets the
+oversampling rate to 16 and prescaler values below 1 in CPR2/CPR are
+clamped by the driver to 1.
+
+For example the value of 0x1f4004e2 will set CPR2/CPR, TCR and DLM/DLL
+respectively to 0x1f4, 0x0 and 0x04e2, choosing the prescaler value,
+the oversampling rate and the clock divisor of 62.500, 16 and 1250
+respectively.  These parameters will set the baud rate for the serial
+port to 62500000 / 62.500 / 1250 / 16 = 50bps.
+
+References:
+
+[1] "OXPCIe200 PCI Express Multi-Port Bridge", Oxford Semiconductor,
+    Inc., DS-0045, 10 Nov 2008, Section "950 Mode", pp. 64-65
+
+[2] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port",
+    Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Section "950 Mode",
+    p. 20
+
+[3] "OXPCIe954 PCI Express Bridge to Quad Serial Port", Oxford
+    Semiconductor, Inc., DS-0047, Feb 08, Section "950 Mode", p. 20
+
+[4] "OXPCIe958 PCI Express Bridge to Octal Serial Port", Oxford
+    Semiconductor, Inc., DS-0048, Feb 08, Section "950 Mode", p. 20
+
+Maciej W. Rozycki  <macro@orcam.me.uk>
diff --git linux-libre-5.15-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-5.15.126-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 6655d929a351..404ecb6d0f87 100644
--- linux-libre-5.15-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-5.15.126-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -304,7 +304,6 @@ Code  Seq#    Include File                                           Comments
 0x89  00-06  arch/x86/include/asm/sockios.h
 0x89  0B-DF  linux/sockios.h
 0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
-0x89  E0-EF  linux/dn.h                                              PROTOPRIVATE range
 0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
 0x8B  all    linux/wireless.h
 0x8C  00-3F                                                          WiNRADiO driver
diff --git linux-libre-5.15-gnu/Documentation/userspace-api/landlock.rst linux-libre-5.15.126-gnu/Documentation/userspace-api/landlock.rst
index f35552ff19ba..b68e7a51009f 100644
--- linux-libre-5.15-gnu/Documentation/userspace-api/landlock.rst
+++ linux-libre-5.15.126-gnu/Documentation/userspace-api/landlock.rst
@@ -267,8 +267,8 @@ restrict such paths with dedicated ruleset flags.
 Ruleset layers
 --------------
 
-There is a limit of 64 layers of stacked rulesets.  This can be an issue for a
-task willing to enforce a new ruleset in complement to its 64 inherited
+There is a limit of 16 layers of stacked rulesets.  This can be an issue for a
+task willing to enforce a new ruleset in complement to its 16 inherited
 rulesets.  Once this limit is reached, sys_landlock_restrict_self() returns
 E2BIG.  It is then strongly suggested to carefully build rulesets once in the
 life of a thread, especially for applications able to launch other applications
diff --git linux-libre-5.15-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst linux-libre-5.15.126-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 976d34445a24..f1421cf1a1b3 100644
--- linux-libre-5.15-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ linux-libre-5.15.126-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3326,15 +3326,15 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - __u8
       - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference
-        picture set.
+        picture set": provides the index of the short term before references in DPB array.
     * - __u8
       - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference
-        picture set.
+        picture set": provides the index of the short term after references in DPB array.
     * - __u8
       - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocLtCurr as described in section 8.3.2 "Decoding process for reference
-        picture set.
+        picture set": provides the index of the long term references in DPB array.
     * - __u64
       - ``flags``
       - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
diff --git linux-libre-5.15-gnu/Documentation/virt/kvm/api.rst linux-libre-5.15.126-gnu/Documentation/virt/kvm/api.rst
index a6729c8cf063..ec38299f9428 100644
--- linux-libre-5.15-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-5.15.126-gnu/Documentation/virt/kvm/api.rst
@@ -4117,6 +4117,18 @@ not holding a previously reported uncorrected error).
 :Parameters: struct kvm_s390_cmma_log (in, out)
 :Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 
@@ -4197,12 +4209,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 ----------------------------
 
@@ -7265,3 +7271,63 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset
 of the result of KVM_CHECK_EXTENSION.  KVM will forward to userspace
 the hypercalls whose corresponding bit is in the argument, and return
 ENOSYS for the others.
+
+9. Known KVM API problems
+=========================
+
+In some cases, KVM's API has some inconsistencies or common pitfalls
+that userspace need to be aware of.  This section details some of
+these issues.
+
+Most of them are architecture specific, so the section is split by
+architecture.
+
+9.1. x86
+--------
+
+``KVM_GET_SUPPORTED_CPUID`` issues
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible
+to take its result and pass it directly to ``KVM_SET_CPUID2``.  This section
+documents some cases in which that requires some care.
+
+Local APIC features
+~~~~~~~~~~~~~~~~~~~
+
+CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``,
+but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or
+``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of
+the local APIC.
+
+The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature.
+
+CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``.
+It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
+has enabled in-kernel emulation of the local APIC.
+
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems.  Different
+versions of KVM return different values for this information and userspace
+should not rely on it.  Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU.  In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
+Obsolete ioctls and capabilities
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually
+available.  Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if
+available.
+
+Ordering of KVM_GET_*/KVM_SET_* ioctls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TBD
diff --git linux-libre-5.15-gnu/Documentation/virt/kvm/devices/vm.rst linux-libre-5.15.126-gnu/Documentation/virt/kvm/devices/vm.rst
index 0aa5b1cfd700..147efec626e5 100644
--- linux-libre-5.15-gnu/Documentation/virt/kvm/devices/vm.rst
+++ linux-libre-5.15.126-gnu/Documentation/virt/kvm/devices/vm.rst
@@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT).
 :Parameters: address of a buffer in user space to store the data (u8) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
 -----------------------------------
@@ -224,6 +225,7 @@ the POP (u64).
 
 :Parameters: address of a buffer in user space to store the data (u64) to
 :Returns:    -EFAULT if the given address is not accessible from kernel space
+	     -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT
 -----------------------------------
@@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0.
 	     (kvm_s390_vm_tod_clock) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 4. GROUP: KVM_S390_VM_CRYPTO
 ============================
@@ -299,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 :Parameters: none
 :Returns:   -ENOMEM if there is not enough free memory to start migration mode;
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined);
diff --git linux-libre-5.15-gnu/MAINTAINERS linux-libre-5.15.126-gnu/MAINTAINERS
index 3b79fd441dde..e6b53e76651b 100644
--- linux-libre-5.15-gnu/MAINTAINERS
+++ linux-libre-5.15.126-gnu/MAINTAINERS
@@ -434,6 +434,7 @@ ACPI VIOT DRIVER
 M:	Jean-Philippe Brucker <jean-philippe@linaro.org>
 L:	linux-acpi@vger.kernel.org
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 F:	drivers/acpi/viot.c
 F:	include/linux/acpi_viot.h
@@ -941,6 +942,7 @@ AMD IOMMU (AMD-VI)
 M:	Joerg Roedel <joro@8bytes.org>
 R:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	drivers/iommu/amd/
@@ -3112,7 +3114,7 @@ F:	drivers/net/ieee802154/atusb.h
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
-L:	linux-audit@redhat.com (moderated for non-subscribers)
+L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
@@ -3405,6 +3407,7 @@ F:	net/sched/act_bpf.c
 F:	net/sched/cls_bpf.c
 F:	samples/bpf/
 F:	scripts/bpf_doc.py
+F:	scripts/pahole-version.sh
 F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/
@@ -4663,6 +4666,7 @@ T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
 F:	fs/cifs/
 F:	fs/smbfs_common/
+F:	include/uapi/linux/cifs
 
 COMPACTPCI HOTPLUG CORE
 M:	Scott Murray <scott@spiteful.org>
@@ -4810,7 +4814,6 @@ F:	Documentation/ABI/testing/sysfs-bus-counter
 F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
-F:	include/linux/counter_enum.h
 
 CP2615 I2C DRIVER
 M:	Bence Csókás <bence98@sch.bme.hu>
@@ -5203,13 +5206,6 @@ F:	include/linux/tfrc.h
 F:	include/uapi/linux/dccp.h
 F:	net/dccp/
 
-DECnet NETWORK LAYER
-L:	linux-decnet-user@lists.sourceforge.net
-S:	Orphan
-W:	http://linux-decnet.sourceforge.net
-F:	Documentation/networking/decnet.rst
-F:	net/decnet/
-
 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@orcam.me.uk>
 L:	linux-mips@vger.kernel.org
@@ -5602,6 +5598,7 @@ M:	Christoph Hellwig <hch@lst.de>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
 R:	Robin Murphy <robin.murphy@arm.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 W:	http://git.infradead.org/users/hch/dma-mapping.git
 T:	git git://git.infradead.org/users/hch/dma-mapping.git
@@ -5614,6 +5611,7 @@ F:	kernel/dma/
 DMA MAPPING BENCHMARK
 M:	Barry Song <song.bao.hua@hisilicon.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 F:	kernel/dma/map_benchmark.c
 F:	tools/testing/selftests/dma/
 
@@ -7024,7 +7022,6 @@ F:	drivers/net/mdio/fwnode_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
 F:	drivers/net/phy/
-F:	drivers/of/of_net.c
 F:	include/dt-bindings/net/qca-ar803x.h
 F:	include/linux/*mdio*.h
 F:	include/linux/mdio/*.h
@@ -7036,6 +7033,7 @@ F:	include/linux/platform_data/mdio-gpio.h
 F:	include/trace/events/mdio.h
 F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
+F:	net/core/of_net.c
 
 EXFAT FILE SYSTEM
 M:	Namjae Jeon <linkinjeon@kernel.org>
@@ -7115,6 +7113,7 @@ F:	drivers/gpu/drm/exynos/exynos_dp*
 EXYNOS SYSMMU (IOMMU) driver
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 F:	drivers/iommu/exynos-iommu.c
 
@@ -7239,9 +7238,6 @@ F:	include/linux/fs.h
 F:	include/linux/fs_types.h
 F:	include/uapi/linux/fs.h
 F:	include/uapi/linux/openat2.h
-X:	fs/io-wq.c
-X:	fs/io-wq.h
-X:	fs/io_uring.c
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
@@ -7744,7 +7740,7 @@ F:	Documentation/locking/*futex*
 F:	include/asm-generic/futex.h
 F:	include/linux/futex.h
 F:	include/uapi/linux/futex.h
-F:	kernel/futex.c
+F:	kernel/futex/*
 F:	tools/perf/bench/futex*
 F:	tools/testing/selftests/futex/
 
@@ -7947,9 +7943,10 @@ F:	drivers/media/usb/go7007/
 
 GOODIX TOUCHSCREEN
 M:	Bastien Nocera <hadess@hadess.net>
+M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
-F:	drivers/input/touchscreen/goodix.c
+F:	drivers/input/touchscreen/goodix*
 
 GOOGLE ETHERNET DRIVERS
 M:	Jeroen de Borst <jeroendb@google.com>
@@ -8565,7 +8562,7 @@ F:	drivers/net/wireless/intersil/hostap/
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
 L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
-F:	drivers/platform/x86/tc1100-wmi.c
+F:	drivers/platform/x86/hp/tc1100-wmi.c
 
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -9457,6 +9454,7 @@ INTEL IOMMU (VT-d)
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Lu Baolu <baolu.lu@linux.intel.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	drivers/iommu/intel/
@@ -9793,6 +9791,7 @@ IOMMU DRIVERS
 M:	Joerg Roedel <joro@8bytes.org>
 M:	Will Deacon <will@kernel.org>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	Documentation/devicetree/bindings/iommu/
@@ -9810,9 +9809,7 @@ L:	io-uring@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.dk/linux-block
 T:	git git://git.kernel.dk/liburing
-F:	fs/io-wq.c
-F:	fs/io-wq.h
-F:	fs/io_uring.c
+F:	io_uring/
 F:	include/linux/io_uring.h
 F:	include/uapi/linux/io_uring.h
 F:	tools/io_uring/
@@ -10835,7 +10832,7 @@ M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/misc-devices/lis3lv02d.rst
 F:	drivers/misc/lis3lv02d/
-F:	drivers/platform/x86/hp_accel.c
+F:	drivers/platform/x86/hp/hp_accel.c
 
 LIST KUNIT TEST
 M:	David Gow <davidgow@google.com>
@@ -11795,6 +11792,7 @@ F:	drivers/i2c/busses/i2c-mt65xx.c
 MEDIATEK IOMMU DRIVER
 M:	Yong Wu <yong.wu@mediatek.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/iommu/mediatek*
@@ -15554,6 +15552,7 @@ F:	drivers/i2c/busses/i2c-qcom-cci.c
 QUALCOMM IOMMU
 M:	Rob Clark <robdclark@gmail.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -15720,6 +15719,8 @@ F:	arch/mips/generic/board-ranchu.c
 
 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/crng/random.git
 S:	Maintained
 F:	drivers/char/random.c
 
@@ -17980,6 +17981,7 @@ F:	arch/x86/boot/video*
 SWIOTLB SUBSYSTEM
 M:	Christoph Hellwig <hch@infradead.org>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 W:	http://git.infradead.org/users/hch/dma-mapping.git
 T:	git git://git.infradead.org/users/hch/dma-mapping.git
@@ -20560,12 +20562,14 @@ M:	Juergen Gross <jgross@suse.com>
 M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 C:	irc://irc.oftc.net/xfs
+M:	Leah Rumancik <leah.rumancik@gmail.com>
 M:	Darrick J. Wong <djwong@kernel.org>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
diff --git linux-libre-5.15-gnu/Makefile linux-libre-5.15.126-gnu/Makefile
index c0031dc001a7..5cde03c38aa2 100644
--- linux-libre-5.15-gnu/Makefile
+++ linux-libre-5.15.126-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 0
+SUBLEVEL = 126
 EXTRAVERSION = -gnu
 NAME = Trick or Treat
 
@@ -93,10 +93,17 @@ endif
 
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
 
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
-  quiet=silent_
-  KBUILD_VERBOSE = 0
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
+else
+silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
+endif
+
+ifeq ($(silence),s)
+quiet=silent_
+KBUILD_VERBOSE = 0
 endif
 
 export quiet Q KBUILD_VERBOSE
@@ -430,6 +437,7 @@ else
 HOSTCC	= gcc
 HOSTCXX	= g++
 endif
+HOSTPKG_CONFIG	= pkg-config
 
 export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
 			      -O2 -fomit-frame-pointer -std=gnu89
@@ -480,6 +488,8 @@ LZ4		= lz4c
 XZ		= xz
 ZSTD		= zstd
 
+PAHOLE_FLAGS	= $(shell PAHOLE=$(PAHOLE) $(srctree)/scripts/pahole-flags.sh)
+
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 NOSTDINC_FLAGS :=
@@ -523,7 +533,7 @@ KBUILD_LDFLAGS_MODULE :=
 KBUILD_LDFLAGS :=
 CLANG_FLAGS :=
 
-export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
+export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
@@ -534,6 +544,7 @@ export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export PAHOLE_FLAGS
 
 # Files to ignore in find ... statements
 
@@ -687,12 +698,19 @@ endif
 
 ifdef CONFIG_CC_IS_GCC
 RETPOLINE_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
+RETPOLINE_CFLAGS	+= $(call cc-option,-mindirect-branch-cs-prefix)
 RETPOLINE_VDSO_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-inline -mindirect-branch-register)
 endif
 ifdef CONFIG_CC_IS_CLANG
 RETPOLINE_CFLAGS	:= -mretpoline-external-thunk
 RETPOLINE_VDSO_CFLAGS	:= -mretpoline
 endif
+
+ifdef CONFIG_RETHUNK
+RETHUNK_CFLAGS         := -mfunction-return=thunk-extern
+RETPOLINE_CFLAGS       += $(RETHUNK_CFLAGS)
+endif
+
 export RETPOLINE_CFLAGS
 export RETPOLINE_VDSO_CFLAGS
 
@@ -811,6 +829,9 @@ endif
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 
+# These result in bogus false positives
+KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer)
+
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
@@ -831,12 +852,12 @@ endif
 
 # Initialize all stack variables with a zero value.
 ifdef CONFIG_INIT_STACK_ALL_ZERO
-# Future support for zero initialization is still being debated, see
-# https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being
-# renamed or dropped.
 KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
+ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+# https://github.com/llvm/llvm-project/issues/44842
 KBUILD_CFLAGS	+= -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 endif
+endif
 
 # While VLAs have been removed, GCC produces unreachable stack probes
 # for the randomize_kstack_offset feature. Disable it for all compilers.
@@ -857,7 +878,9 @@ else
 DEBUG_CFLAGS	+= -g
 endif
 
-ifndef CONFIG_AS_IS_LLVM
+ifdef CONFIG_AS_IS_LLVM
+KBUILD_AFLAGS	+= -g
+else
 KBUILD_AFLAGS	+= -Wa,-gdwarf-2
 endif
 
@@ -865,6 +888,7 @@ ifndef CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
 dwarf-version-$(CONFIG_DEBUG_INFO_DWARF4) := 4
 dwarf-version-$(CONFIG_DEBUG_INFO_DWARF5) := 5
 DEBUG_CFLAGS	+= -gdwarf-$(dwarf-version-y)
+KBUILD_AFLAGS	+= -gdwarf-$(dwarf-version-y)
 endif
 
 ifdef CONFIG_DEBUG_INFO_REDUCED
@@ -1008,6 +1032,21 @@ ifdef CONFIG_CC_IS_GCC
 KBUILD_CFLAGS += -Wno-maybe-uninitialized
 endif
 
+ifdef CONFIG_CC_IS_GCC
+# The allocators already balk at large sizes, so silence the compiler
+# warnings for bounds checks involving those possible values. While
+# -Wno-alloc-size-larger-than would normally be used here, earlier versions
+# of gcc (<9.1) weirdly don't handle the option correctly when _other_
+# warnings are produced (?!). Using -Walloc-size-larger-than=SIZE_MAX
+# doesn't work (as it is documented to), silently resolving to "0" prior to
+# version 9.1 (and producing an error more recently). Numeric values larger
+# than PTRDIFF_MAX also don't work prior to version 9.1, which are silently
+# ignored, continuing to default to PTRDIFF_MAX. So, left with no other
+# choice, we must perform a versioned check to disable this warning.
+# https://lore.kernel.org/lkml/20210824115859.187f272f@canb.auug.org.au
+KBUILD_CFLAGS += $(call cc-ifversion, -ge, 0901, -Wno-alloc-size-larger-than)
+endif
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow
 
@@ -1053,6 +1092,11 @@ KBUILD_CFLAGS   += $(KCFLAGS)
 KBUILD_LDFLAGS_MODULE += --build-id=sha1
 LDFLAGS_vmlinux += --build-id=sha1
 
+KBUILD_LDFLAGS	+= -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+KBUILD_LDFLAGS	+= $(call ld-option,--no-warn-rwx-segments)
+endif
+
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
@@ -1115,7 +1159,9 @@ export MODORDER := $(extmod_prefix)modules.order
 export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps
 
 ifeq ($(KBUILD_EXTMOD),)
-core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
+core-y			+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/
+core-$(CONFIG_BLOCK)	+= block/
+core-$(CONFIG_IO_URING)	+= io_uring/
 
 vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, \
 		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
@@ -1125,13 +1171,11 @@ vmlinux-alldirs	:= $(sort $(vmlinux-dirs) Documentation \
 		     $(patsubst %/,%,$(filter %/, $(core-) \
 			$(drivers-) $(libs-))))
 
-subdir-modorder := $(addsuffix modules.order,$(filter %/, \
-			$(core-y) $(core-m) $(libs-y) $(libs-m) \
-			$(drivers-y) $(drivers-m)))
-
 build-dirs	:= $(vmlinux-dirs)
 clean-dirs	:= $(vmlinux-alldirs)
 
+subdir-modorder := $(addsuffix /modules.order, $(build-dirs))
+
 # Externally visible symbols (used by link-vmlinux.sh)
 KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y))
 KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y)))
@@ -1160,7 +1204,7 @@ KBUILD_MODULES := 1
 
 autoksyms_recursive: descend modules.order
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) -f $(srctree)/Makefile vmlinux"
+	  "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
 endif
 
 autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
@@ -1301,8 +1345,7 @@ hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
 
 PHONY += headers
 headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
-	$(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
-	  $(error Headers not exportable for the $(SRCARCH) architecture))
+	$(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML))
 	$(Q)$(MAKE) $(hdr-inst)=include/uapi
 	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
 
@@ -1807,6 +1850,8 @@ modules modules_install:
 	@echo >&2 '***'
 	@exit 1
 
+KBUILD_MODULES :=
+
 endif # CONFIG_MODULES
 
 # Single targets
@@ -1832,18 +1877,12 @@ $(single-ko): single_modpost
 $(single-no-ko): descend
 	@:
 
-ifeq ($(KBUILD_EXTMOD),)
-# For the single build of in-tree modules, use a temporary file to avoid
-# the situation of modules_install installing an invalid modules.order.
-MODORDER := .modules.tmp
-endif
-
+# Remove MODORDER when done because it is not the real one.
 PHONY += single_modpost
 single_modpost: $(single-no-ko) modules_prepare
 	$(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$m;) } > $(MODORDER)
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
-KBUILD_MODULES := 1
+	$(Q)rm -f $(MODORDER)
 
 export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod_prefix), $(single-no-ko))
 
@@ -1851,10 +1890,8 @@ export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod_prefix), $(single-no-ko))
 build-dirs := $(foreach d, $(build-dirs), \
 			$(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
 
-endif
+KBUILD_MODULES := 1
 
-ifndef CONFIG_MODULES
-KBUILD_MODULES :=
 endif
 
 # Handle descending into subdirectories listed in $(build-dirs)
diff --git linux-libre-5.15-gnu/arch/Kconfig linux-libre-5.15.126-gnu/arch/Kconfig
index 8df1c7102643..b45c699c2bac 100644
--- linux-libre-5.15-gnu/arch/Kconfig
+++ linux-libre-5.15.126-gnu/arch/Kconfig
@@ -200,6 +200,9 @@ config HAVE_NMI
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -261,6 +264,9 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
+
 # Select if arch init_task must go in the __init_task_data section
 config ARCH_TASK_STRUCT_ON_STACK
 	bool
@@ -1141,6 +1147,7 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 config RANDOMIZE_KSTACK_OFFSET_DEFAULT
 	bool "Randomize kernel stack offset on syscall entry"
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
@@ -1234,6 +1241,9 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
        bool
        help
diff --git linux-libre-5.15-gnu/arch/alpha/boot/tools/objstrip.c linux-libre-5.15.126-gnu/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- linux-libre-5.15-gnu/arch/alpha/boot/tools/objstrip.c
+++ linux-libre-5.15.126-gnu/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/bugs.h linux-libre-5.15.126-gnu/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- linux-libre-5.15-gnu/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/page.h linux-libre-5.15.126-gnu/arch/alpha/include/asm/page.h
index 18f48a6f2ff6..8f3f5eecba28 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/page.h
+++ linux-libre-5.15.126-gnu/arch/alpha/include/asm/page.h
@@ -18,7 +18,7 @@ extern void clear_page(void *page);
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 
 #define alloc_zeroed_user_highpage_movable(vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, vma, vmaddr)
+	alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, vma, vaddr)
 #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE_MOVABLE
 
 extern void copy_page(void * _to, void * _from);
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/thread_info.h linux-libre-5.15.126-gnu/arch/alpha/include/asm/thread_info.h
index 2592356e3215..0ce1eee0924b 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/thread_info.h
+++ linux-libre-5.15.126-gnu/arch/alpha/include/asm/thread_info.h
@@ -77,7 +77,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/timex.h linux-libre-5.15.126-gnu/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/timex.h
+++ linux-libre-5.15.126-gnu/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/entry.S linux-libre-5.15.126-gnu/arch/alpha/kernel/entry.S
index e227f3a29a43..c41a5a9c3b9f 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-5.15.126-gnu/arch/alpha/kernel/entry.S
@@ -469,8 +469,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/irq.c linux-libre-5.15.126-gnu/arch/alpha/kernel/irq.c
index f6d2946edbd2..15f2effd6baf 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/irq.c
+++ linux-libre-5.15.126-gnu/arch/alpha/kernel/irq.c
@@ -60,7 +60,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+	irq_data_update_affinity(data, cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/module.c linux-libre-5.15.126-gnu/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/module.c
+++ linux-libre-5.15.126-gnu/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/rtc.c linux-libre-5.15.126-gnu/arch/alpha/kernel/rtc.c
index ce3077946e1d..fb3025396ac9 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/rtc.c
+++ linux-libre-5.15.126-gnu/arch/alpha/kernel/rtc.c
@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/srmcons.c linux-libre-5.15.126-gnu/arch/alpha/kernel/srmcons.c
index 90635ef5dafa..6dc952b0df4a 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/srmcons.c
+++ linux-libre-5.15.126-gnu/arch/alpha/kernel/srmcons.c
@@ -59,7 +59,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/traps.c linux-libre-5.15.126-gnu/arch/alpha/kernel/traps.c
index e805106409f7..afaf4f6ad0f4 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-5.15.126-gnu/arch/alpha/kernel/traps.c
@@ -192,7 +192,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 #ifndef CONFIG_MATHEMU
@@ -235,7 +235,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -368,20 +382,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
@@ -577,7 +577,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 
 got_exception:
 	/* Ok, we caught the exception, but we don't want it.  Is there
@@ -632,7 +632,7 @@ got_exception:
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 /*
diff --git linux-libre-5.15-gnu/arch/alpha/mm/fault.c linux-libre-5.15.126-gnu/arch/alpha/mm/fault.c
index eee5102c3d88..e9193d52222e 100644
--- linux-libre-5.15-gnu/arch/alpha/mm/fault.c
+++ linux-libre-5.15.126-gnu/arch/alpha/mm/fault.c
@@ -204,7 +204,7 @@ retry:
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/io.h linux-libre-5.15.126-gnu/arch/arc/include/asm/io.h
index 8f777d6441a5..80347382a380 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/io.h
+++ linux-libre-5.15.126-gnu/arch/arc/include/asm/io.h
@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 /*
  * io{read,write}{16,32}be() macros
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/linkage.h linux-libre-5.15.126-gnu/arch/arc/include/asm/linkage.h
index c9434ff3aa4c..8a3fb71e9cfa 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/linkage.h
+++ linux-libre-5.15.126-gnu/arch/arc/include/asm/linkage.h
@@ -8,6 +8,10 @@
 
 #include <asm/dwarf.h>
 
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
 #ifdef __ASSEMBLY__
 
 .macro ST2 e, o, off
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/pgtable-levels.h linux-libre-5.15.126-gnu/arch/arc/include/asm/pgtable-levels.h
index 8084ef2f6491..4e7a19cb8e52 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/pgtable-levels.h
+++ linux-libre-5.15.126-gnu/arch/arc/include/asm/pgtable-levels.h
@@ -163,7 +163,7 @@
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
 /*
  * 4th level paging: pte
diff --git linux-libre-5.15-gnu/arch/arc/kernel/entry.S linux-libre-5.15.126-gnu/arch/arc/kernel/entry.S
index dd77a0c8f740..66ba549b520f 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/entry.S
+++ linux-libre-5.15.126-gnu/arch/arc/kernel/entry.S
@@ -196,6 +196,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
diff --git linux-libre-5.15-gnu/arch/arc/kernel/process.c linux-libre-5.15.126-gnu/arch/arc/kernel/process.c
index 3793876f42d9..5f7f5aab361f 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/process.c
+++ linux-libre-5.15.126-gnu/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
@@ -294,7 +294,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	eflags = x->e_flags;
 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
-		force_sigsegv(SIGSEGV);
+		force_fatal_sig(SIGSEGV);
 		return 0;
 	}
 
diff --git linux-libre-5.15-gnu/arch/arc/mm/ioremap.c linux-libre-5.15.126-gnu/arch/arc/mm/ioremap.c
index 0ee75aca6e10..712c2311daef 100644
--- linux-libre-5.15-gnu/arch/arc/mm/ioremap.c
+++ linux-libre-5.15.126-gnu/arch/arc/mm/ioremap.c
@@ -94,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
diff --git linux-libre-5.15-gnu/arch/arm/Kconfig linux-libre-5.15.126-gnu/arch/arm/Kconfig
index dcf2df6da98f..f2fbb170d813 100644
--- linux-libre-5.15-gnu/arch/arm/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/Kconfig
@@ -4,6 +4,7 @@ config ARM
 	default y
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
@@ -1455,6 +1456,7 @@ config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1740,7 +1742,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
diff --git linux-libre-5.15-gnu/arch/arm/Kconfig.debug linux-libre-5.15.126-gnu/arch/arm/Kconfig.debug
index 98436702e0c7..644875d73ba1 100644
--- linux-libre-5.15-gnu/arch/arm/Kconfig.debug
+++ linux-libre-5.15.126-gnu/arch/arm/Kconfig.debug
@@ -410,12 +410,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git linux-libre-5.15-gnu/arch/arm/Makefile linux-libre-5.15.126-gnu/arch/arm/Makefile
index 847c31e7c368..fa45837b8065 100644
--- linux-libre-5.15-gnu/arch/arm/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm/Makefile
@@ -60,15 +60,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -90,11 +90,11 @@ tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/efi-header.S linux-libre-5.15.126-gnu/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..230030c13085 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-5.15.126-gnu/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/head.S linux-libre-5.15.126-gnu/arch/arm/boot/compressed/head.S
index b1cb1972361b..bf79f2f78d23 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/head.S
+++ linux-libre-5.15.126-gnu/arch/arm/boot/compressed/head.S
@@ -203,7 +203,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/vmlinux.lds.S linux-libre-5.15.126-gnu/arch/arm/boot/compressed/vmlinux.lds.S
index 1bcb68ac4b01..3fcb3e62dc56 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/vmlinux.lds.S
+++ linux-libre-5.15.126-gnu/arch/arm/boot/compressed/vmlinux.lds.S
@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/Makefile linux-libre-5.15.126-gnu/arch/arm/boot/dts/Makefile
index 7e0934180724..7a72fc636a7a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/Makefile
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
@@ -779,6 +780,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 124026fa0d09..f207499461b3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -12,22 +12,20 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am33xx-l4.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
index 356446131e63..7e376dfcc859 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1500,8 +1500,7 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-evm.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..c8b80f156ec9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-evm.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/am3517-evm.dts
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-som.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am5748.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/am5748.dtsi
index c260aa1a85bd..a1f029e9d1f3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am5748.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/am5748.dtsi
@@ -25,6 +25,10 @@
 	status = "disabled";
 };
 
+&usb4_tm {
+	status = "disabled";
+};
+
 &atl_tm {
 	status = "disabled";
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2e94f32d9dfc..5de82729eb7e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-370.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-370.dtsi
index 46e6d3ed8f35..c042c416a94a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-370.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-370.dtsi
@@ -74,7 +74,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-375.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-375.dtsi
index 7f2f24a29e6c..352a2f7ba311 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-375.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-375.dtsi
@@ -582,7 +582,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-380.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..7146cc8f082a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-380.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-380.dtsi
@@ -79,7 +79,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -98,7 +98,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 5bd6a66d2c2b..e7649c795699 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -450,7 +456,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
@@ -471,7 +487,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -506,7 +522,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..f081f7cb66e5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-385.dtsi
@@ -84,7 +84,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -103,7 +103,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -125,7 +125,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-38x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..df3c8d1d8f64 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-38x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-39x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-39x.dtsi
index e0b7c2099831..9525e7b7f436 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-39x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-39x.dtsi
@@ -453,7 +453,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -472,7 +472,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -494,7 +494,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 8558bf6bb54c..d55fe162fc7f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -97,7 +97,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -115,7 +115,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -133,7 +133,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -151,7 +151,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..fdcc81819940 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -112,7 +112,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -130,7 +130,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -148,7 +148,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -166,7 +166,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -184,7 +184,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -202,7 +202,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -220,7 +220,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -238,7 +238,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 1d24b394ea4c..a497dd135491 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
index dd7148060c4a..d0a5c2ff0fec 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
@@ -5,6 +5,7 @@
 
 / {
 	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
 
 	/delete-node/regulator-vcc-sdhci0;
 	/delete-node/regulator-vcc-sdhci1;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..b8e55bf167aa 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
@@ -103,7 +103,7 @@
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -114,7 +114,7 @@
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 2efd70666738..af7ea7cab8cf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -231,6 +231,21 @@
 			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &gpio0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6419c9762c0b..6c9f34396a3a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -246,6 +246,21 @@
 			linux,code = <11>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &ehci1 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 6dde51c2aed3..ac07c240419a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,11 +117,6 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
-	};
-
 	pinctrl_fwspiwp_default: fwspiwp_default {
 		function = "FWSPIWP";
 		groups = "FWSPIWP";
@@ -653,12 +648,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e5724b1a2e20 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -364,6 +364,41 @@
 				status = "disabled";
 			};
 
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
index b1068cca4228..fd8dc1183b3e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -233,10 +233,9 @@
 		status = "okay";
 
 		eeprom@53 {
-			compatible = "atmel,24c32";
+			compatible = "atmel,24c02";
 			reg = <0x53>;
 			pagesize = <16>;
-			size = <128>;
 			status = "okay";
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 025a78310e3a..a818e8ebd638 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -68,8 +68,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -87,8 +87,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -110,8 +110,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -152,8 +152,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -167,9 +167,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
index e06b58724ca8..4ebbbe65c0ce 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -197,8 +197,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -216,8 +216,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -235,8 +235,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -258,7 +258,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -273,8 +272,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -288,8 +287,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -323,21 +322,21 @@
 	status = "okay";
 
 	eeprom@50 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 		status = "okay";
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
 		status = "disabled";
 	};
 
 	eeprom@53 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d72c042f2850..a49c2966b41e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -57,8 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -171,8 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index d241c24f0d83..e519d2747936 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -81,8 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -140,7 +140,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
index f3d6aaa3a78d..0ba856066ffb 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -169,8 +169,8 @@
 			regulators {
 				vdd_3v3: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -188,8 +188,8 @@
 
 				vddioddr: VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1450000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -209,8 +209,8 @@
 
 				vddcore: VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -228,8 +228,8 @@
 
 				vddcpu: VDD_OTHER {
 					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <1125000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-ramp-delay = <3125>;
@@ -248,8 +248,8 @@
 
 				vldo1: LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -403,7 +403,7 @@
 	pinctrl_flx3_default: flx3_default {
 		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
+		bias-pull-up;
 	};
 
 	pinctrl_flx4_default: flx4_default {
@@ -659,7 +659,7 @@
 };
 
 &shdwc {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..7e5c598e7e68 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-tse850-3.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91rm9200.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91rm9200.dtsi
index d1181ead18e5..21344fbc89e5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91rm9200.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91rm9200.dtsi
@@ -660,7 +660,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9261ek.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8..8f3b483bb64d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9261ek.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 87bb39060e8b..4783e657b4cb 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -84,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -219,6 +228,12 @@
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
index 748df7955ae6..e96ddb2e26e2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts
index f4d2fc20397c..c53d9eb0b802 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -28,12 +28,12 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };
 
 &genet_mdio {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2711.dtsi
index 3b60297af7f6..89af57482bc8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2711.dtsi
@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -458,12 +459,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -472,6 +487,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -480,6 +502,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -488,6 +517,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -506,11 +557,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -576,6 +633,8 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
+	gpio-ranges = <&gpio 0 0 58>;
+
 	gpclk0_gpio49: gpclk0_gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 1b63d6b19750..25d87212cefd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -53,18 +53,17 @@
 			  "GPIO18",
 			  "NC", /* GPIO19 */
 			  "NC", /* GPIO20 */
-			  "GPIO21",
+			  "CAM_GPIO0",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
 			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
 			  "NC", /* GPIO32 */
 			  "NC", /* GPIO33 */
 			  "NC", /* GPIO34 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 33b2b77aa47d..00582eb2c12e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -74,16 +74,18 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
 			  "NC", /* GPIO42 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 61010266ca9a..90472e76a313 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -45,7 +45,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..3dfce4312dfc 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -63,8 +63,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm283x.dtsi
index a3e06b680947..c113661a6668 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm283x.dtsi
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 61c7b137607e..7900aac4f35a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,7 +20,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 6c6bb7b17d27..7546c8d07bcd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index d29e7f80ea6a..beae9eab9cb8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index 9b6887d477d8..7879f7d7d9c3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 7989a53597d4..56d309dbc6b0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 87b655be674c..184e3039aa86 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,7 +30,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..c2a266a439d0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 05d4f2931772..9bef6b9bfa8d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -129,7 +129,7 @@
 		};
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
 		mdio@200 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 452b8d0ab180..b0d8a688141d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,7 +16,7 @@
 		bootargs = "earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..ca2266b936ee
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a..edf9910100b0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -20,7 +20,7 @@
 		bootargs = " console=ttyS0,115200n8 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;
 		device_type = "memory";
 	};
@@ -195,3 +195,25 @@
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm5301x.dtsi
index f92089290ccd..b4b73ab99626 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	chipcommonA@18000000 {
+	chipcommon-a-bus@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
 		#address-cells = <1>;
@@ -44,7 +44,7 @@
 		};
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -242,6 +242,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -369,8 +371,8 @@
 		#address-cells = <1>;
 	};
 
-	mdio-bus-mux@18003000 {
-		compatible = "mdio-mux-mmioreg";
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -408,27 +410,27 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
 
-	dmu@1800c000 {
+	dmu-bus@1800c000 {
 		compatible = "simple-bus";
 		ranges = <0 0x1800c000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		cru@100 {
-			compatible = "simple-bus";
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
 			reg = <0x100 0x1a4>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			lcpll0: lcpll0@100 {
+			lcpll0: clock-controller@100 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-lcpll0";
 				reg = <0x100 0x14>;
@@ -437,7 +439,7 @@
 						     "sdio", "ddr_phy";
 			};
 
-			genpll: genpll@140 {
+			genpll: clock-controller@140 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-genpll";
 				reg = <0x140 0x24>;
@@ -448,7 +450,12 @@
 						     "sata1", "sata2";
 			};
 
-			pinctrl: pin-controller@1c0 {
+			syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
@@ -535,7 +542,6 @@
 				  "spi_lr_session_done",
 				  "spi_lr_overread";
 		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94708.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94708.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94709.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94709.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dove.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/dove.dtsi
index 89e0bdaf3a85..726d353eda68 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dove.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/dove.dtsi
@@ -129,7 +129,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..5733e3a4ea8e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3482,8 +3482,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3511,7 +3510,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
@@ -4189,11 +4188,11 @@
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/dra7.dtsi
index dfc1ef8ef6ae..61a3fb3e2a2f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/dra7.dtsi
@@ -1320,20 +1320,20 @@
 };
 
 /* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
 
-&timer4_target {
+&timer16_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/e60k02.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/e60k02.dtsi
index cfb239d5186a..54b4de6a5925 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/e60k02.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/e60k02.dtsi
@@ -302,6 +302,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
index f6ba5e426040..7562497c45dd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -249,7 +249,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4.dtsi
index eab77a66ae8f..201e2fe7ed0c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
index 55922176807e..5f5d9b135736 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -827,7 +827,7 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4210.dtsi
index 7e7d65ce6585..ac62d8dc70b1 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4210.dtsi
@@ -393,7 +393,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..fbfc04f9a04c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -179,7 +179,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
index 968c7943653e..49843e016828 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -585,7 +585,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-origen.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4412-origen.dts
index 5479ef09f9f3..0acb05f0a2b7 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-origen.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos4412-origen.dts
@@ -95,7 +95,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..d7d756614edd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -260,7 +260,7 @@
 	};
 
 	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..e4861415a0fe 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -126,7 +129,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -286,7 +289,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5250.dtsi
index 4ffa9253b566..de0275df807f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5250.dtsi
@@ -1119,7 +1119,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..3765f5ba03f2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -120,7 +120,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..07f65213aae6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5420.dtsi
index e23e8ffb093f..4fb4804830af 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5420.dtsi
@@ -602,7 +602,7 @@
 		};
 
 		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
+			compatible = "samsung,exynos5420-mipi-video-phy";
 			syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d91f7fa2cf80..e57d3e464434 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -29,7 +29,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -84,7 +84,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -128,7 +128,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -172,7 +172,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -216,7 +216,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..0b27e968c6fd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +139,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +212,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +285,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +358,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
index 13112a8a5dd8..6544c730340f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-evk.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-evk.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx28-evk.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx28-evk.dts
index 7e2b0f198dfa..1053b7c584d8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx28-evk.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx28-evk.dts
@@ -129,7 +129,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "sst,sst25vf016b", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx28-m28evk.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx28-m28evk.dts
index f3bddc5ada4b..13acdc7916b9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx28-m28evk.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx28-m28evk.dts
@@ -33,7 +33,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "m25p80", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx28-sps1.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx28-sps1.dts
index 43be7a6a769b..90928db0df70 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx28-sps1.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx28-sps1.dts
@@ -51,7 +51,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "everspin,mr25h256", "mr25h256";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx53-m53menlo.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx53-ppd.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx53-ppd.dts
index 37d0cffea99c..70c4a4852256 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx53-ppd.dts
@@ -488,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..864dc5018451 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -297,7 +297,11 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&rmii_clk>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	status = "okay";
 
 	mdio {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6dl-rex-basic.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6dl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6dl.dtsi
index fdd81fdc3f35..cd3183c36488 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6dl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6dl.dtsi
@@ -84,6 +84,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-ba16.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-ba16.dtsi
index 6330d75f8f39..f266f1b7e0cf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -142,7 +142,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-bx50v3.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 10922375c51e..ead83091e193 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-cm-fx6.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bfb530f29d9d..1ad41c944b4b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -260,7 +260,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index c713ac03b3b9..9591848cbd37 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -102,7 +102,7 @@
 	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-dms-ba16.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 48fb47e715f6..137db38f0d27 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 4cde45d5c90c..e894faba571f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-marsboard.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-marsboard.dts
index 05ee28388229..cc1801002394 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-marsboard.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -100,7 +100,7 @@
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-prti6q.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-prti6q.dts
index b4605edfd2ab..d8fa83effd63 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-prti6q.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -364,8 +364,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi>;
 		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
 	};
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-rex-pro.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q.dtsi
index 9caba4529c71..a8069e0a8fe8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6q.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6q.dtsi
@@ -163,6 +163,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 30fa349f9d05..a696873dc1ab 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -286,6 +286,8 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -516,8 +518,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -810,6 +810,12 @@
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e21f6ac864e5..baa197c90060 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -96,7 +96,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 563bf9d44fe0..2ba577e602e7 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-colibri.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 4e2a309c93fa..1e86b3814708 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -132,7 +132,7 @@
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-0 = <&pinctrl_i2c2_gpio>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
@@ -488,7 +488,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
 			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 648f5fcb72e6..2c1d6f28e695 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -35,7 +35,7 @@
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25vf040b", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..4b81a975c979 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -632,7 +632,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 68e5ab2e27e2..6bb4855d13ce 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -29,7 +29,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 8e23cec7149e..696427b487f0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -26,7 +26,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index b167b33bd108..683f6e58ab23 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";
@@ -258,8 +248,8 @@
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: spi-flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
@@ -273,6 +263,10 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+};
+
 &i2c_intern {
 	pmic@8 {
 		compatible = "fsl,pfuze100";
@@ -397,7 +391,7 @@
 
 /* HDMI_CTRL */
 &i2c2 {
-	clock-frequency = <375000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index ac34709e9741..0ad4cb4f1e82 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -179,7 +179,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index c96f4d7e1e0d..beaa2dcd436c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -321,7 +321,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..ee7e2371f94b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -252,7 +252,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 49da30d7510c..904d5d051d63 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -237,7 +237,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 5e58740d40c5..1368a4762037 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -272,7 +272,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index eb9a0b104f1c..901b9a761b66 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -313,7 +313,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0c0105468a2f..37482a9023fc 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -197,7 +197,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index fded07f370b3..d6ba4b2a60f6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -226,7 +226,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..ccfa8e320be6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index b62a0dbb033f..ec6fba5ee8fd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -309,6 +309,7 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl.dtsi
index 038b28a50a96..9038c84caa0a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qdl.dtsi
@@ -763,7 +763,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qp.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qp.dtsi
index b310f13a53f2..4d23c92aa8a6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sl-evk.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sl-evk.dts
index 25f6f2fb1555..f16c830f1e91 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sl-evk.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sl-evk.dts
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index a17b8bbbdb95..f2231cb1e32d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -597,6 +597,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sl.dtsi
index b3324ccc5a94..8d59377f5654 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sl.dtsi
@@ -117,6 +117,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sll.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sll.dtsi
index 4ce2a5439964..34a03e7db0a8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sll.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sll.dtsi
@@ -117,6 +117,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 66af78e83b70..a2c79bcf9a11 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -107,7 +107,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx-sdb-reva.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index dce5dcf96c25..7dda42553f4b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -123,7 +123,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: s25fl128s@0 {
+	flash0: flash@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +133,7 @@
 		spi-tx-bus-width = <4>;
 	};
 
-	flash1: s25fl128s@2 {
+	flash1: flash@2 {
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx-sdb.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx-sdb.dts
index 99f4cf777a38..969cfe920d25 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx-sdb.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -108,7 +108,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -118,7 +118,7 @@
 		reg = <0>;
 	};
 
-	flash1: n25q256a@2 {
+	flash1: flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx.dtsi
index 6822d3445b1d..1cb5cdd505da 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6sx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6sx.dtsi
@@ -164,12 +164,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index a3fde3316c73..1a18c41ce385 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -286,7 +286,7 @@
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
index 47d3ce5d255f..acd936540d89 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -19,7 +19,7 @@
 };
 
 &qspi {
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
index a095a7654ac6..29ed38dce580 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
@@ -18,7 +18,7 @@
 };
 
 &qspi {
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index 2a449a3c1ae2..09a83dbdf651 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -19,7 +19,7 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
index 162dc259edc8..5a74c7f68eb6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul.dtsi
index 85f9b396ac14..ab4a6e317b39 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ul.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ul.dtsi
@@ -64,20 +64,18 @@
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
@@ -149,6 +147,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -543,7 +544,7 @@
 			};
 
 			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_KPP>;
@@ -998,7 +999,7 @@
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
@@ -1007,7 +1008,7 @@
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
@@ -1028,7 +1029,7 @@
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 0cdbf7b6e728..b6fc879e9dbe 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
index b7e984284e1a..d000606c0704 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
@@ -18,7 +18,7 @@
 };
 
 &qspi {
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-colibri.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-colibri.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -293,7 +293,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-mba7.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7-mba7.dtsi
index 5e6bef230dc7..b55a7792a839 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-mba7.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -264,7 +264,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index af39e5370fa1..045e4413d339 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -13,6 +13,10 @@
 	};
 };
 
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
 &gpio6 {
 	gpio-line-names = "",
 			  "",
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
index 5162fe227d1e..fdc10563f147 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -52,7 +52,7 @@
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..6ad39dca7009 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
index 104a85254adb..5afb1674e012 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -64,7 +64,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-sdb.dts
index 4a0d83784d7d..4e62ed2df11d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-sdb.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7d-sdb.dts
@@ -205,13 +205,8 @@
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
@@ -385,14 +380,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7s-warp.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7s-warp.dts
index 569bbd84e371..558b064da743 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7s-warp.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7s.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7s.dtsi
index 46f01021ff6f..5cac4928c381 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7s.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7s.dtsi
@@ -104,6 +104,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};
 
@@ -496,7 +497,7 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
 
@@ -1135,7 +1136,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7ulp.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..bcec98b96411 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7ulp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/integratorap.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/integratorap.dts
index 67d1f9b24a52..8600c0548525 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/integratorap.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/integratorap.dts
@@ -153,6 +153,7 @@
 
 	pci: pciv3@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index bc857676d191..c13d2f6e1a38 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
 
-		pwms = <&pwm3 0 5000000 0>;
+		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 7b151acb9984..88b70ba1c8fe 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index 2a0a98fe67f0..3240c67e0c39 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a-tsn.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..aca78b5eddf2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a-tsn.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/ls1021a.dtsi
index 4fce81422943..f3b8540750b6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/ls1021a.dtsi
@@ -329,39 +329,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -1016,4 +983,37 @@
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/meson.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/meson.dtsi
index 3be7cba603d5..26eaba3fa96f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/meson.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -228,7 +228,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/meson8.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/meson8.dtsi
index f80ddc98d3a2..72828b9d4281 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/meson8.dtsi
@@ -736,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/meson8b.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/meson8b.dtsi
index b49b7cbaed4e..cfd4a909a7a7 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/meson8b.dtsi
@@ -724,27 +724,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/moxart.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/moxart.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index eb6eb21cb2a4..33c8d5b3d679 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index d4ff49939a3d..bbe18618f5c5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index 82a104b2a65f..8e3425cb8e8b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 0334641f8829..cf274c926711 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 767e0ac0df7c..7fe7efee28ac 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd13451..e7534fe9c53c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-beagle-ab4.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-beagle.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-beagle.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7d..51baedf1603b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 2c19d6e255bd..6883ccb45600 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6c..a7f99ae0c1fe 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
index 938cc691bb2f..bb5e00b36d8d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
@@ -515,7 +517,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
@@ -607,6 +609,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
index 9db9fe67cd63..95df45cc70c0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -5,9 +5,11 @@
 
 #include "omap3-gta04a5.dts"
 
-&omap3_pmx_core {
+/ {
 	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
 
+&omap3_pmx_core {
 	gpmc_pins: pinmux_gpmc_pins {
 		pinctrl-single,pins = <
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 73d477898ec2..06e7cf96c663 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-n900.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478..d40c3d2c4914 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-n900.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,7 @@
 
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		led@0 {
+			reg = <0>;
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan1 {
+		led@1 {
+			reg = <1>;
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan2 {
+		led@2 {
+			reg = <2>;
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan3 {
+		led@3 {
+			reg = <3>;
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan4 {
+		led@4 {
+			reg = <4>;
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan5 {
+		led@5 {
+			reg = <5>;
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan6 {
+		led@6 {
+			reg = <6>;
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan7 {
+		led@7 {
+			reg = <7>;
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan8 {
+		led@8 {
+			reg = <8>;
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb3..c3570acc35fa 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790..d95a0e130058 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f105..218a10c0d815 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 37608af6c07f..ca6d777ebf84 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap5-cm-t54.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a58..e62ea8b6d53f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
 		label = "rofs";
 	};
 
-	rwfs@6000000 {
+	rwfs@2a00000 {
 		reg = <0x2a00000 0x1600000>; // 22MB
 		label = "rwfs";
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ox820.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/ox820.dtsi
index 90846a7655b4..dde4364892bf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ox820.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/ox820.dtsi
@@ -287,7 +287,7 @@
 				clocks = <&armclk>;
 			};
 
-			gic: gic@1000 {
+			gic: interrupt-controller@1000 {
 				compatible = "arm,arm11mp-gic";
 				interrupt-controller;
 				#interrupt-cells = <3>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
index d1c1c6aab2b8..0e830476fefd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1571,7 +1571,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index b0f476ff017f..aadca9bf416c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -11,9 +11,9 @@
 		dma@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7a337dc08741..726aa30eeef5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -102,10 +102,10 @@
 			status = "okay";
 			perst-gpio = <&tlmm 38 0x1>;
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 94872518b5a2..9988b9eab803 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -65,11 +65,11 @@
 		dma@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
index ff1bdb10ad19..9dcf308b3ad4 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -423,8 +424,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index f7ea2e5dd191..971d2e229260 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
 	};
 
-	mdio0: mdio@0 {
+	mdio0: mdio-0 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@
 		};
 	};
 
-	mdio1: mdio@1 {
+	mdio1: mdio-1 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4139d3817bd6..f4139411c41e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -808,8 +808,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -859,8 +859,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -910,8 +910,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-mdm9615.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-mdm9615.dtsi
index dda2ceec6591..ad9b52d53ef9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -324,6 +324,7 @@
 
 				pmicgpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..c197927e7435 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -146,7 +146,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -192,7 +194,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -318,7 +320,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
index 78ec496d5bc3..05d51839d40a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -718,7 +718,7 @@
 		blsp2_uart7: serial@f995d000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995d000 0x1000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -1589,8 +1589,8 @@
 				#phy-cells = <0>;
 				qcom,dsi-phy-index = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
 			};
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-pm8841.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-pm8841.dtsi
index 2fd59c440903..c73e5b149ac5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -25,6 +25,7 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a..9d62487f6c8f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -205,7 +205,7 @@
 		blsp1_uart3: serial@831000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x00831000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc 30>,
 				 <&gcc 9>;
 			clock-names = "core", "iface";
@@ -334,12 +334,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
-					<&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
 					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
 					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
-			interconnect-names = "memory-a",
-					     "memory-b",
+			interconnect-names = "memory",
 					     "imem",
 					     "config";
 
@@ -504,7 +502,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3036-evb.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..94216f870b57 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3036-evb.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3036-evb.dts
@@ -31,11 +31,10 @@
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3188-radxarock.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f43b2..3718fac62841 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3188-radxarock.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -71,7 +71,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3188.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3188.dtsi
index 2c606494b78c..e07b1d79c470 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3188.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3188.dtsi
@@ -378,7 +378,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -606,7 +606,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk322x.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk322x.dtsi
index 75af99c76d7e..f31cf1df892b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk322x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk322x.dtsi
@@ -718,8 +718,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-evb-act8846.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-firefly.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-firefly.dtsi
index 7fb582302b32..74ba7e21850a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -233,11 +233,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-miqi.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..db1eb648e0e1 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-miqi.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,11 +162,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-rock2-square.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-rock2-square.dts
index c4d1d142d8c6..bc44606ca05d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -165,11 +165,10 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-vmarc-som.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288.dtsi
index 4dcdcf17c977..2e6138eeacd1 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3288.dtsi
@@ -940,7 +940,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -971,7 +971,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -1180,6 +1180,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3xxx.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0c6e..17e89d30de78 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3xxx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..b6d55a782c20 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -564,7 +564,6 @@
 			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			spi-cs-high;
 			spi-max-frequency = <1200000>;
 
 			pinctrl-names = "default";
@@ -636,7 +635,7 @@
 };
 
 &i2s0 {
-	dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+	dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
 	status = "okay";
 };
 
@@ -895,7 +894,7 @@
 		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gph2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
+		interrupt-names = "host-wakeup";
 	};
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/s5pv210.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/s5pv210.dtsi
index 353ba7b09a0c..415d0f555858 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/s5pv210.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/s5pv210.dtsi
@@ -239,8 +239,8 @@
 			reg = <0xeee30000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <16>;
-			dma-names = "rx", "tx", "tx-sec";
-			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			dma-names = "tx", "rx", "tx-sec";
+			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
 			clock-names = "iis",
 				      "i2s_opclk0",
 				      "i2s_opclk1";
@@ -259,8 +259,8 @@
 			reg = <0xe2100000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <17>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 12>, <&pdma1 13>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 13>, <&pdma1 12>;
 			clock-names = "iis", "i2s_opclk0";
 			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
 			pinctrl-names = "default";
@@ -274,8 +274,8 @@
 			reg = <0xe2a00000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <18>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 14>, <&pdma1 15>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 15>, <&pdma1 14>;
 			clock-names = "iis", "i2s_opclk0";
 			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
 			pinctrl-names = "default";
@@ -582,7 +582,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sam9x60.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sam9x60.dtsi
index ec45ced3cde6..e1e0dec8cc1f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sam9x60.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sam9x60.dtsi
@@ -567,7 +567,7 @@
 			mpddrc: mpddrc@ffffe800 {
 				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sama5d2.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sama5d2.dtsi
index 801969c113d6..4c87c2aa8fc8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sama5d2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sama5d2.dtsi
@@ -413,7 +413,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
@@ -1125,7 +1125,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h linux-libre-5.15.126-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h
index 22fe9e522a97..6e87f0d4b8fc 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
@@ -765,7 +765,7 @@
 #define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
 #define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
 #define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
-#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
 #define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
 #define PIN_PD21			117
 #define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sama7g5.dtsi
index 6c58c151c6d9..a63a8e768654 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sama7g5.dtsi
@@ -319,8 +319,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
 					<&dma0 AT91_XDMAC_DT_PERID(8)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -485,8 +483,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
 					<&dma0 AT91_XDMAC_DT_PERID(22)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -511,8 +507,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
 					<&dma0 AT91_XDMAC_DT_PERID(24)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -559,7 +553,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xe8c11000 0x1000>,
 				<0xe8c12000 0x2000>;
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga.dtsi
index 0b021eef0b53..b8c5dd7860cb 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga.dtsi
@@ -46,7 +46,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@fffed000 {
+	intc: interrupt-controller@fffed000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -782,7 +782,7 @@
 		};
 
 		qspi: spi@ff705000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi
index a574ea91d9d3..f1e50d2e623a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -38,7 +38,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@ffffd000 {
+	intc: interrupt-controller@ffffd000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -756,7 +756,7 @@
 		};
 
 		qspi: spi@ff809000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff809000 0x100>,
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index 2b645642b935..2a745522404d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -12,7 +12,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 90e676e7019f..1b02d46496a8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -119,7 +119,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 6f138b2b2616..51bb436784e2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -124,7 +124,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index c155ff02eb6e..cae9ddd5ed38 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -169,7 +169,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f2..ca18b959e655 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 99a71757cdf4..3f7aa7bf0863 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -116,7 +116,7 @@
 	flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a060718758b6..25874e1b9c82 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -224,7 +224,7 @@
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -241,7 +241,7 @@
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/spear1340.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear1340.dtsi
index 1a8f5e8b10e3..66cd473ecb61 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/spear1340.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear1340.dtsi
@@ -136,9 +136,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 12 0 1>,
-					<&dwdma0 13 1 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
 			};
 
 			thermal@e07008c4 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/spear13xx.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear13xx.dtsi
index c87b881b2c8b..913553367687 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/spear13xx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 4 0 0>,
-					<&dwdma0 5 0 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 5 0 0>,
+					<&dwdma0 4 0 0>;
+				dma-names = "rx", "tx";
 			};
 
 			rtc@e0580000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/spear320-hmi.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48aac3e..5c562fb4886f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/spear320-hmi.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear320-hmi.dts
@@ -242,7 +242,7 @@
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/spear600.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..9d5a04a46b14 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/spear600.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-codina.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 952606e607ed..ce62ba877da1 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -544,8 +544,8 @@
 				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 				vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
-				mount-matrix = "0", "-1", "0",
-					       "1", "0", "0",
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
 					       "0", "0", "1";
 			};
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index fabc390ccb0c..6c9e812ef03f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -502,8 +502,8 @@
 					accelerometer@18 {
 						compatible = "bosch,bma222e";
 						reg = <0x18>;
-						mount-matrix = "0", "1", "0",
-							       "-1", "0", "0",
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
 							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 264f3e9b5fce..7fab746e0570 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -181,10 +181,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -292,10 +288,10 @@
 					};
 
 					ab8500_ldo_aux2 {
-						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						/* Supplies the Cypress TMA140 touchscreen only with 3.0V */
 						regulator-name = "AUX2";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
 					};
 
 					ab8500_ldo_aux3 {
@@ -314,9 +310,9 @@
 
 					ab8500_ldo_aux5 {
 						regulator-name = "AUX5";
+						/* Intended for 1V8 for touchscreen but actually left unused */
 						regulator-min-microvolt = <1050000>;
 						regulator-max-microvolt = <2790000>;
-						regulator-always-on;
 					};
 
 					ab8500_ldo_aux6 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32f429-disco.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32f429-disco.dts
index 075ac57d0bf4..6435e099c632 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32f429-disco.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32f429-disco.dts
@@ -192,7 +192,7 @@
 
 	display: display@1{
 		/* Connect panel-ilitek-9341 to ltdc */
-		compatible = "st,sf-tc240t-9370-t";
+		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
 		reg = <1>;
 		spi-3wire;
 		spi-max-frequency = <10000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 1cf8a23c2644..7f40b34401a9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -284,6 +284,88 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 5b60ecbd718f..d3553e0f0187 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1179,7 +1179,7 @@
 		};
 	};
 
-	sai2a_pins_c: sai2a-4 {
+	sai2a_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1190,7 +1190,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-5 {
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1235,14 +1235,14 @@
 		};
 	};
 
-	sai2b_pins_c: sai2a-4 {
+	sai2b_pins_c: sai2b-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
 			bias-disable;
 		};
 	};
 
-	sai2b_sleep_pins_c: sai2a-sleep-5 {
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp151.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp151.dtsi
index bd289bf5d269..e0d483318798 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp151.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp151.dtsi
@@ -553,7 +553,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
@@ -824,7 +824,7 @@
 				#sound-dai-cells = <0>;
 
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 87 0x400 0x01>;
@@ -834,7 +834,7 @@
 			sai1b: audio-controller@4400a024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 88 0x400 0x01>;
@@ -855,7 +855,7 @@
 			sai2a: audio-controller@4400b004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 89 0x400 0x01>;
@@ -865,7 +865,7 @@
 			sai2b: audio-controller@4400b024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 90 0x400 0x01>;
@@ -886,7 +886,7 @@
 			sai3a: audio-controller@4400c004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 113 0x400 0x01>;
@@ -896,7 +896,7 @@
 			sai3b: audio-controller@4400c024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 114 0x400 0x01>;
@@ -1271,7 +1271,7 @@
 			sai4a: audio-controller@50027004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 99 0x400 0x01>;
@@ -1281,7 +1281,7 @@
 			sai4b: audio-controller@50027024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 100 0x400 0x01>;
@@ -1452,7 +1452,7 @@
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
-			clocks = <&rcc USBH>;
+			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -1461,7 +1461,7 @@
 		usbh_ehci: usb@5800d000 {
 			compatible = "generic-ehci";
 			reg = <0x5800d000 0x1000>;
-			clocks = <&rcc USBH>;
+			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index fbf3826933e4..7c0aa59accc5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -137,10 +137,13 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		routing =
-			"MIC_IN", "Capture",
-			"Capture", "Mic Bias",
-			"Playback", "HP_OUT";
+		widgets = "Headphone", "Headphone Jack",
+			  "Line", "Line In Jack",
+			  "Microphone", "Microphone Jack";
+		routing = "Headphone Jack", "HP_OUT",
+			  "LINE_IN", "Line In Jack",
+			  "MIC_IN", "Microphone Jack",
+			  "Microphone Jack", "Mic Bias";
 		dais = <&sai2a_port &sai2b_port>;
 		status = "okay";
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 6885948f3024..5f65d96435f6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -88,7 +88,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "STM32MP1-AV96-HDMI";
+		label = "STM32-AV96-HDMI";
 		dais = <&sai2a_port>;
 		status = "okay";
 	};
@@ -100,7 +100,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -141,6 +141,7 @@
 		compatible = "snps,dwmac-mdio";
 		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
 		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
 
 		phy0: ethernet-phy@7 {
 			reg = <7>;
@@ -266,6 +267,12 @@
 			};
 		};
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &ltdc {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 2b0ac605549d..108d934a186b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -171,12 +171,6 @@
 			status = "disabled";
 		};
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
 };
 
 &iwdg2 {
@@ -202,7 +196,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
+		spi-max-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 899bfe04aeb9..a76173e8a2a1 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -249,7 +249,7 @@
 	stusb1600@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpioi>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&stusb1600_pins_a>;
@@ -438,7 +438,7 @@
 	i2s2_port: port {
 		i2s2_endpoint: endpoint {
 			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
+			dai-format = "i2s";
 			mclk-fs = <256>;
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a33.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-a33.dtsi
index 2beddbb3c518..b3d1bdfb5118 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a33.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -164,7 +164,7 @@
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi
index ac97eac91349..82fdb04122ca 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -200,7 +200,7 @@
 		status = "disabled";
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cluster0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -253,7 +253,7 @@
 		};
 	};
 
-	cpu1_opp_table: opp_table1 {
+	cpu1_opp_table: opp-table-cluster1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..3706216ffb40 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -169,7 +169,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 8e7dfcffe1fb..355f7844fd55 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h3.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-h3.dtsi
index 4e89701df91f..ae4f933abb89 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h3.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -44,7 +44,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -112,7 +112,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-120000000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi
index b30bc1a25ebb..084323d5c61c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -593,6 +593,17 @@
 			#size-cells = <0>;
 		};
 
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		csi1: camera@1cb4000 {
 			compatible = "allwinner,sun8i-v3s-csi";
 			reg = <0x01cb4000 0x3000>;
@@ -604,16 +615,5 @@
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 		};
-
-		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x2000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/suniv-f1c100s.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..def830101448 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -104,8 +104,10 @@
 
 		wdt: watchdog@1c20ca0 {
 			compatible = "allwinner,suniv-f1c100s-wdt",
-				     "allwinner,sun4i-a10-wdt";
+				     "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
 		};
 
 		uart0: serial@1c25000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..fdc1d64dfff9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,12 +13,15 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..abdf4456826f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,12 +15,15 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-venice2.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra124-venice2.dts
index e6b54ac1ebd1..84e2d24065e9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-venice2.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,6 +48,13 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1079,13 +1086,6 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
index dd4d506683de..7f14f0d005c3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi linux-libre-5.15.126-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
index e81e5937a60a..03301ddb3403 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -597,8 +597,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -693,8 +693,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 3b88209bacea..ff1f9a1bcfcf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -132,6 +132,7 @@
 		reg = <0x2c0f0000 0x1000>;
 		interrupts = <0 84 4>;
 		cache-level = <2>;
+		cache-unified;
 	};
 
 	pmu {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 043ddd70372f..36d5299b2baa 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -343,7 +343,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts linux-libre-5.15.126-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..ba2001f37315 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ linux-libre-5.15.126-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -340,7 +340,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/configs/bcm2835_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/bcm2835_defconfig
index 383c632eba7b..1e244a928790 100644
--- linux-libre-5.15-gnu/arch/arm/configs/bcm2835_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/bcm2835_defconfig
@@ -108,6 +108,7 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_VC4=y
+CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/cm_x300_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/cm_x300_defconfig
index 502a9d870ca4..45769d0ddd4e 100644
--- linux-libre-5.15-gnu/arch/arm/configs/cm_x300_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/cm_x300_defconfig
@@ -146,7 +146,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/ezx_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/ezx_defconfig
index a49e699e52de..ec84d80096b1 100644
--- linux-libre-5.15-gnu/arch/arm/configs/ezx_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/ezx_defconfig
@@ -314,7 +314,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_CODEPAGE_437=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/imote2_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/imote2_defconfig
index 118c4c927f26..6db871d4e077 100644
--- linux-libre-5.15-gnu/arch/arm/configs/imote2_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/imote2_defconfig
@@ -288,7 +288,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_CODEPAGE_437=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/multi_v5_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/multi_v5_defconfig
index 80a3ae02d759..e883cb6dc645 100644
--- linux-libre-5.15-gnu/arch/arm/configs/multi_v5_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/multi_v5_defconfig
@@ -188,6 +188,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_ATMEL_ISI=m
@@ -195,6 +196,7 @@ CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/multi_v7_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/multi_v7_defconfig
index 33572998dbbe..2eafcf1c5d89 100644
--- linux-libre-5.15-gnu/arch/arm/configs/multi_v7_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/multi_v7_defconfig
@@ -696,7 +696,6 @@ CONFIG_DRM_IMX_LDB=m
 CONFIG_DRM_IMX_HDMI=m
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_MSM=m
 CONFIG_DRM_FSL_DCU=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/mxs_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/mxs_defconfig
index ca32446b187f..f53086ddc48b 100644
--- linux-libre-5.15-gnu/arch/arm/configs/mxs_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/mxs_defconfig
@@ -93,6 +93,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/nhk8815_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/nhk8815_defconfig
index 23595fc5a29a..907d6512821a 100644
--- linux-libre-5.15-gnu/arch/arm/configs/nhk8815_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/nhk8815_defconfig
@@ -127,7 +127,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/pxa_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/pxa_defconfig
index 58f4834289e6..dedaaae3d0d8 100644
--- linux-libre-5.15-gnu/arch/arm/configs/pxa_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/pxa_defconfig
@@ -699,7 +699,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_DEFAULT="utf8"
diff --git linux-libre-5.15-gnu/arch/arm/configs/spear13xx_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/spear13xx_defconfig
index 3b206a31902f..065553326b39 100644
--- linux-libre-5.15-gnu/arch/arm/configs/spear13xx_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/spear13xx_defconfig
@@ -61,7 +61,6 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/spear3xx_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/spear3xx_defconfig
index fc5f71c765ed..afca722d6605 100644
--- linux-libre-5.15-gnu/arch/arm/configs/spear3xx_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/spear3xx_defconfig
@@ -41,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/spear6xx_defconfig linux-libre-5.15.126-gnu/arch/arm/configs/spear6xx_defconfig
index 52a56b8ce6a7..bc32c02cb86b 100644
--- linux-libre-5.15-gnu/arch/arm/configs/spear6xx_defconfig
+++ linux-libre-5.15.126-gnu/arch/arm/configs/spear6xx_defconfig
@@ -36,7 +36,6 @@ CONFIG_INPUT_FF_MEMLESS=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
diff --git linux-libre-5.15-gnu/arch/arm/crypto/Kconfig linux-libre-5.15.126-gnu/arch/arm/crypto/Kconfig
index 2b575792363e..149a5bd6b88c 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/crypto/Kconfig
@@ -63,7 +63,7 @@ config CRYPTO_SHA512_ARM
 	  using optimized ARM assembler and NEON, when available.
 
 config CRYPTO_BLAKE2S_ARM
-	tristate "BLAKE2s digest algorithm (ARM)"
+	bool "BLAKE2s digest algorithm (ARM)"
 	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
 	help
 	  BLAKE2s digest algorithm optimized with ARM scalar instructions.  This
@@ -102,6 +102,8 @@ config CRYPTO_AES_ARM_BS
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
+	select CRYPTO_AES
+	select CRYPTO_CBC
 	select CRYPTO_SIMD
 	help
 	  Use a faster and more secure NEON based implementation of AES in CBC,
diff --git linux-libre-5.15-gnu/arch/arm/crypto/Makefile linux-libre-5.15.126-gnu/arch/arm/crypto/Makefile
index eafa898ba6a7..971e74546fb1 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm/crypto/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
 obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
 obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o
+obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
@@ -31,7 +31,7 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
 sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
 sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
 sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-blake2s-arm-y   := blake2s-core.o blake2s-glue.o
+libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
 blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
 sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
 sha2-arm-ce-y	:= sha2-ce-core.o sha2-ce-glue.o
diff --git linux-libre-5.15-gnu/arch/arm/crypto/blake2s-core.S linux-libre-5.15.126-gnu/arch/arm/crypto/blake2s-core.S
index 86345751bbf3..df40e46601f1 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/blake2s-core.S
+++ linux-libre-5.15.126-gnu/arch/arm/crypto/blake2s-core.S
@@ -167,8 +167,8 @@
 .endm
 
 //
-// void blake2s_compress_arch(struct blake2s_state *state,
-//			      const u8 *block, size_t nblocks, u32 inc);
+// void blake2s_compress(struct blake2s_state *state,
+//			 const u8 *block, size_t nblocks, u32 inc);
 //
 // Only the first three fields of struct blake2s_state are used:
 //	u32 h[8];	(inout)
@@ -176,7 +176,7 @@
 //	u32 f[2];	(in)
 //
 	.align		5
-ENTRY(blake2s_compress_arch)
+ENTRY(blake2s_compress)
 	push		{r0-r2,r4-r11,lr}	// keep this an even number
 
 .Lnext_block:
@@ -303,4 +303,4 @@ ENTRY(blake2s_compress_arch)
 	str		r3, [r12], #4
 	bne		1b
 	b		.Lcopy_block_done
-ENDPROC(blake2s_compress_arch)
+ENDPROC(blake2s_compress)
diff --git linux-libre-5.15-gnu/arch/arm/crypto/blake2s-glue.c linux-libre-5.15.126-gnu/arch/arm/crypto/blake2s-glue.c
index f2cc1e5fc9ec..0238a70d9581 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/blake2s-glue.c
+++ linux-libre-5.15.126-gnu/arch/arm/crypto/blake2s-glue.c
@@ -1,78 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * BLAKE2s digest algorithm, ARM scalar implementation
- *
- * Copyright 2020 Google LLC
- */
 
 #include <crypto/internal/blake2s.h>
-#include <crypto/internal/hash.h>
-
 #include <linux/module.h>
 
 /* defined in blake2s-core.S */
-EXPORT_SYMBOL(blake2s_compress_arch);
-
-static int crypto_blake2s_update_arm(struct shash_desc *desc,
-				     const u8 *in, unsigned int inlen)
-{
-	return crypto_blake2s_update(desc, in, inlen, blake2s_compress_arch);
-}
-
-static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
-{
-	return crypto_blake2s_final(desc, out, blake2s_compress_arch);
-}
-
-#define BLAKE2S_ALG(name, driver_name, digest_size)			\
-	{								\
-		.base.cra_name		= name,				\
-		.base.cra_driver_name	= driver_name,			\
-		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
-		.base.cra_blocksize	= BLAKE2S_BLOCK_SIZE,		\
-		.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx), \
-		.base.cra_module	= THIS_MODULE,			\
-		.digestsize		= digest_size,			\
-		.setkey			= crypto_blake2s_setkey,	\
-		.init			= crypto_blake2s_init,		\
-		.update			= crypto_blake2s_update_arm,	\
-		.final			= crypto_blake2s_final_arm,	\
-		.descsize		= sizeof(struct blake2s_state),	\
-	}
-
-static struct shash_alg blake2s_arm_algs[] = {
-	BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
-};
-
-static int __init blake2s_arm_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(blake2s_arm_algs,
-					ARRAY_SIZE(blake2s_arm_algs)) : 0;
-}
-
-static void __exit blake2s_arm_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		crypto_unregister_shashes(blake2s_arm_algs,
-					  ARRAY_SIZE(blake2s_arm_algs));
-}
-
-module_init(blake2s_arm_mod_init);
-module_exit(blake2s_arm_mod_exit);
-
-MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("blake2s-128");
-MODULE_ALIAS_CRYPTO("blake2s-128-arm");
-MODULE_ALIAS_CRYPTO("blake2s-160");
-MODULE_ALIAS_CRYPTO("blake2s-160-arm");
-MODULE_ALIAS_CRYPTO("blake2s-224");
-MODULE_ALIAS_CRYPTO("blake2s-224-arm");
-MODULE_ALIAS_CRYPTO("blake2s-256");
-MODULE_ALIAS_CRYPTO("blake2s-256-arm");
+EXPORT_SYMBOL(blake2s_compress);
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/arch_gicv3.h linux-libre-5.15.126-gnu/arch/arm/include/asm/arch_gicv3.h
index 413abfb42989..f82a819eb0db 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/arch_gicv3.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/arch_gicv3.h
@@ -48,6 +48,7 @@ static inline u32 read_ ## a64(void)		\
 	return read_sysreg(a32); 		\
 }						\
 
+CPUIF_MAP(ICC_EOIR1, ICC_EOIR1_EL1)
 CPUIF_MAP(ICC_PMR, ICC_PMR_EL1)
 CPUIF_MAP(ICC_AP0R0, ICC_AP0R0_EL1)
 CPUIF_MAP(ICC_AP0R1, ICC_AP0R1_EL1)
@@ -63,12 +64,6 @@ CPUIF_MAP(ICC_AP1R3, ICC_AP1R3_EL1)
 
 /* Low-level accessors */
 
-static inline void gic_write_eoir(u32 irq)
-{
-	write_sysreg(irq, ICC_EOIR1);
-	isb();
-}
-
 static inline void gic_write_dir(u32 val)
 {
 	write_sysreg(val, ICC_DIR);
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/assembler.h linux-libre-5.15.126-gnu/arch/arm/include/asm/assembler.h
index e2b1fd558bf3..5d52da168ab3 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/assembler.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/assembler.h
@@ -107,6 +107,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -259,6 +269,7 @@
  */
 #define ALT_UP(instr...)					\
 	.pushsection ".alt.smp.init", "a"			;\
+	.align	2						;\
 	.long	9998b - .					;\
 9997:	instr							;\
 	.if . - 9997b == 2					;\
@@ -270,6 +281,7 @@
 	.popsection
 #define ALT_UP_B(label)					\
 	.pushsection ".alt.smp.init", "a"			;\
+	.align	2						;\
 	.long	9998b - .					;\
 	W(b)	. + (label - 9998b)					;\
 	.popsection
@@ -314,6 +326,23 @@
 #endif
 	.endm
 
+/*
+ * Raw SMP data memory barrier
+ */
+	.macro	__smp_dmb mode
+#if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
+	dmb	ish
+	.else
+	W(dmb)	ish
+	.endif
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#else
+	.error "Incompatible SMP platform"
+#endif
+	.endm
+
 #if defined(CONFIG_CPU_V7M)
 	/*
 	 * setmode is used to assert to be in svc mode during boot. For v7-M
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/bugs.h linux-libre-5.15.126-gnu/arch/arm/include/asm/bugs.h
index 97a312ba0840..fe385551edec 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/bugs.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/bugs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/include/asm/bugs.h
- *
  *  Copyright (C) 1995-2003 Russell King
  */
 #ifndef __ASM_BUGS_H
@@ -10,10 +8,8 @@
 extern void check_writebuffer_bugs(void);
 
 #ifdef CONFIG_MMU
-extern void check_bugs(void);
 extern void check_other_bugs(void);
 #else
-#define check_bugs() do { } while (0)
 #define check_other_bugs() do { } while (0)
 #endif
 
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/dma.h linux-libre-5.15.126-gnu/arch/arm/include/asm/dma.h
index a81dda65c576..45180a2cc47c 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/dma.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/dma.h
@@ -10,7 +10,7 @@
 #else
 #define MAX_DMA_ADDRESS	({ \
 	extern phys_addr_t arm_dma_zone_size; \
-	arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \
+	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
 #endif
 
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/efi.h linux-libre-5.15.126-gnu/arch/arm/include/asm/efi.h
index a6f3b179e8a9..27218eabbf9a 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/efi.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/efi.h
@@ -17,7 +17,6 @@
 
 #ifdef CONFIG_EFI
 void efi_init(void);
-extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
 int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/entry-macro-multi.S linux-libre-5.15.126-gnu/arch/arm/include/asm/entry-macro-multi.S
index dfc6bfa43012..24486dad9e19 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/entry-macro-multi.S
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/entry-macro-multi.S
@@ -13,28 +13,4 @@
 	@
 	badrne	lr, 1b
 	bne	asm_do_IRQ
-
-#ifdef CONFIG_SMP
-	/*
-	 * XXX
-	 *
-	 * this macro assumes that irqstat (r2) and base (r6) are
-	 * preserved from get_irqnr_and_base above
-	 */
-	ALT_SMP(test_for_ipi r0, r2, r6, lr)
-	ALT_UP_B(9997f)
-	movne	r1, sp
-	badrne	lr, 1b
-	bne	do_IPI
-#endif
-9997:
-	.endm
-
-	.macro	arch_irq_handler, symbol_name
-	.align	5
-	.global \symbol_name
-\symbol_name:
-	mov	r8, lr
-	arch_irq_handler_default
-	ret	r8
 	.endm
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/io.h linux-libre-5.15.126-gnu/arch/arm/include/asm/io.h
index f74944c6fe8d..79d246ac93ab 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/io.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/io.h
@@ -436,6 +436,9 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
 #endif
 
 /*
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/mach/map.h linux-libre-5.15.126-gnu/arch/arm/include/asm/mach/map.h
index 92282558caf7..2b8970d8e5a2 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/mach/map.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/perf_event.h linux-libre-5.15.126-gnu/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/perf_event.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/pgtable-nommu.h linux-libre-5.15.126-gnu/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..090011394477 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/pgtable-nommu.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/pgtable-nommu.h
@@ -44,12 +44,6 @@
 
 typedef pte_t *pte_addr_t;
 
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/pgtable.h linux-libre-5.15.126-gnu/arch/arm/include/asm/pgtable.h
index cd1f84bb40ae..a25c4303fc0e 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/pgtable.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -156,13 +165,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 #define __S111  __PAGE_SHARED_EXEC
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/processor.h linux-libre-5.15.126-gnu/arch/arm/include/asm/processor.h
index 9e6b97286307..8aeff55aebfa 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/processor.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/processor.h
@@ -96,6 +96,7 @@ unsigned long get_wchan(struct task_struct *p);
 #define __ALT_SMP_ASM(smp, up)						\
 	"9998:	" smp "\n"						\
 	"	.pushsection \".alt.smp.init\", \"a\"\n"		\
+	"	.align	2\n"						\
 	"	.long	9998b - .\n"					\
 	"	" up "\n"						\
 	"	.popsection\n"
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/ptrace.h linux-libre-5.15.126-gnu/arch/arm/include/asm/ptrace.h
index 93051e2f402c..1408a6a15d0e 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/ptrace.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/ptrace.h
@@ -163,5 +163,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/smp.h linux-libre-5.15.126-gnu/arch/arm/include/asm/smp.h
index 5d508f5d56c4..fc11ddf13b8f 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/smp.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/smp.h
@@ -24,11 +24,6 @@ struct seq_file;
  */
 extern void show_ipi_list(struct seq_file *, int);
 
-/*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
-
 /*
  * Called from C code, this handles an IPI.
  */
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/spectre.h linux-libre-5.15.126-gnu/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/sync_bitops.h linux-libre-5.15.126-gnu/arch/arm/include/asm/sync_bitops.h
index 6f5d627c44a3..f46b3c570f92 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/sync_bitops.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/sync_bitops.h
@@ -14,14 +14,35 @@
  * ops which are SMP safe even on a UP kernel.
  */
 
+/*
+ * Unordered
+ */
+
 #define sync_set_bit(nr, p)		_set_bit(nr, p)
 #define sync_clear_bit(nr, p)		_clear_bit(nr, p)
 #define sync_change_bit(nr, p)		_change_bit(nr, p)
-#define sync_test_and_set_bit(nr, p)	_test_and_set_bit(nr, p)
-#define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
-#define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
 #define sync_test_bit(nr, addr)		test_bit(nr, addr)
-#define arch_sync_cmpxchg		arch_cmpxchg
 
+/*
+ * Fully ordered
+ */
+
+int _sync_test_and_set_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_set_bit(nr, p)	_sync_test_and_set_bit(nr, p)
+
+int _sync_test_and_clear_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_clear_bit(nr, p)	_sync_test_and_clear_bit(nr, p)
+
+int _sync_test_and_change_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_change_bit(nr, p)	_sync_test_and_change_bit(nr, p)
+
+#define arch_sync_cmpxchg(ptr, old, new)				\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__smp_mb__before_atomic();					\
+	__ret = arch_cmpxchg_relaxed((ptr), (old), (new));		\
+	__smp_mb__after_atomic();					\
+	__ret;								\
+})
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/thread_info.h linux-libre-5.15.126-gnu/arch/arm/include/asm/thread_info.h
index 9a18da3e10cc..b682189a2b5d 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/thread_info.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/thread_info.h
@@ -129,15 +129,16 @@ extern int vfp_restore_user_hwstate(struct user_vfp *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
-#define TIF_NOTIFY_SIGNAL	8	/* signal notifications exist */
+#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
 
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
+#define TIF_RESTORE_SIGMASK	19
+#define TIF_SYSCALL_TRACE	20	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	21	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	22	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		23	/* seccomp syscall filtering active */
+
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/timex.h linux-libre-5.15.126-gnu/arch/arm/include/asm/timex.h
index 7c3b3671d6c2..6d1337c169cd 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/timex.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/timex.h
@@ -11,5 +11,6 @@
 
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/uaccess.h linux-libre-5.15.126-gnu/arch/arm/include/asm/uaccess.h
index 36fbc3329252..32dbfd81f42a 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/uaccess.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 #include <linux/string.h>
 #include <asm/memory.h>
 #include <asm/domain.h>
+#include <asm/unaligned.h>
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
@@ -497,7 +498,10 @@ do {									\
 	}								\
 	default: __err = __get_user_bad(); break;			\
 	}								\
-	*(type *)(dst) = __val;						\
+	if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))		\
+		put_unaligned(__val, (type *)(dst));			\
+	else								\
+		*(type *)(dst) = __val; /* aligned by caller */		\
 	if (__err)							\
 		goto err_label;						\
 } while (0)
@@ -507,7 +511,9 @@ do {									\
 	const type *__pk_ptr = (dst);					\
 	unsigned long __dst = (unsigned long)__pk_ptr;			\
 	int __err = 0;							\
-	type __val = *(type *)src;					\
+	type __val = IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)	\
+		     ? get_unaligned((type *)(src))			\
+		     : *(type *)(src);	/* aligned by caller */		\
 	switch (sizeof(type)) {						\
 	case 1: __put_user_asm_byte(__val, __dst, __err, ""); break;	\
 	case 2:	__put_user_asm_half(__val, __dst, __err, ""); break;	\
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/vmlinux.lds.h linux-libre-5.15.126-gnu/arch/arm/include/asm/vmlinux.lds.h
index 4a91428c324d..fad45c884e98 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/vmlinux.lds.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/asm/vmlinux.lds.h
@@ -26,6 +26,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -110,19 +123,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git linux-libre-5.15-gnu/arch/arm/include/debug/imx-uart.h linux-libre-5.15.126-gnu/arch/arm/include/debug/imx-uart.h
index c8eb83d4b896..3edbb3c5b42b 100644
--- linux-libre-5.15-gnu/arch/arm/include/debug/imx-uart.h
+++ linux-libre-5.15.126-gnu/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
diff --git linux-libre-5.15-gnu/arch/arm/kernel/Makefile linux-libre-5.15.126-gnu/arch/arm/kernel/Makefile
index ae295a3bcfef..6ef3b535b7bf 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/Makefile
@@ -106,4 +106,6 @@ endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git linux-libre-5.15-gnu/arch/arm/kernel/bugs.c linux-libre-5.15.126-gnu/arch/arm/kernel/bugs.c
index 14c8dbbb7d2d..087bce6ec8e9 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/bugs.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/bugs.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/init.h>
+#include <linux/cpu.h>
 #include <asm/bugs.h>
 #include <asm/proc-fns.h>
 
@@ -11,7 +12,7 @@ void check_other_bugs(void)
 #endif
 }
 
-void __init check_bugs(void)
+void __init arch_cpu_finalize_init(void)
 {
 	check_writebuffer_bugs();
 	check_other_bugs();
diff --git linux-libre-5.15-gnu/arch/arm/kernel/entry-armv.S linux-libre-5.15.126-gnu/arch/arm/kernel/entry-armv.S
index 241b73d64df7..68261a83b7ad 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/entry-armv.S
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/entry-armv.S
@@ -597,11 +597,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -610,7 +608,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 
@@ -1002,12 +1000,11 @@ vector_\name:
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
-	mrs	lr, spsr
+
+	@ Save spsr_<exception> (parent CPSR)
+2:	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
 	@
@@ -1028,6 +1025,44 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	W(b)	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb
+	isb
+	b	2b
+ENDPROC(vector_bhb_loop8_\name)
+
+vector_bhb_bpiall_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	2b
+ENDPROC(vector_bhb_bpiall_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
@@ -1036,6 +1071,10 @@ ENDPROC(vector_\name)
 	.section .stubs, "ax", %progbits
 	@ This must be the first word
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.word	vector_bhb_loop8_swi
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1150,8 +1189,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1184,6 +1225,30 @@ vector_addrexcptn:
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+.L__vectors_bhb_loop8_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+.L__vectors_bhb_bpiall_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git linux-libre-5.15-gnu/arch/arm/kernel/entry-common.S linux-libre-5.15.126-gnu/arch/arm/kernel/entry-common.S
index d9c99db50243..fde7ac271b14 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/entry-common.S
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/entry-common.S
@@ -153,6 +153,29 @@ ENDPROC(ret_from_fork)
  *-----------------------------------------------------------------------------
  */
 
+	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
 	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
@@ -160,6 +183,7 @@ ENTRY(vector_swi)
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
diff --git linux-libre-5.15-gnu/arch/arm/kernel/entry-ftrace.S linux-libre-5.15.126-gnu/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..5f1b1ce10473 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/entry-ftrace.S
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/entry-ftrace.S
@@ -22,10 +22,7 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
  *
  * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
@@ -70,26 +67,25 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
-				@ before the push {lr} of the mcount mechanism
+	ldr	lr, [sp, #8]    @ get previous LR
 
-	str     lr, [sp, #0]    @ store LR instead of PC
+	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	ldr     lr, [sp, #8]    @ get previous LR
+	str	lr, [sp, #-4]!	@ store previous LR as LR
 
-	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
 
-	stmdb   sp!, {ip, lr}
-	stmdb   sp!, {r0-r11, lr}
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
 	ldr r2, =function_trace_op
 	ldr r2, [r2]				@ pointer to the current
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 
 .endm
 #endif
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	ret	ip
+	ldmia	sp!, {r0-r3}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	ret	ip
+	push	{lr}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/kernel/head-nommu.S linux-libre-5.15.126-gnu/arch/arm/kernel/head-nommu.S
index 0fc814bbc34b..8796a69c78e0 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/head-nommu.S
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/head-nommu.S
@@ -114,6 +114,7 @@ ENTRY(secondary_startup)
 	add	r12, r12, r10
 	ret	r12
 1:	bl	__after_proc_init
+	ldr	r7, __secondary_data		@ reload r7
 	ldr	sp, [r7, #12]			@ set up the stack pointer
 	mov	fp, #0
 	b	secondary_start_kernel
diff --git linux-libre-5.15-gnu/arch/arm/kernel/kgdb.c linux-libre-5.15.126-gnu/arch/arm/kernel/kgdb.c
index 7bd30c0a4280..22f937e6f3ff 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/kgdb.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git linux-libre-5.15-gnu/arch/arm/kernel/perf_callchain.c linux-libre-5.15.126-gnu/arch/arm/kernel/perf_callchain.c
index 3b69a76d341e..1626dfc6f6ce 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/perf_callchain.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/perf_callchain.c
@@ -62,9 +62,10 @@ user_backtrace(struct frame_tail __user *tail,
 void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct frame_tail __user *tail;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -98,9 +99,10 @@ callchain_trace(struct stackframe *fr,
 void
 perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct stackframe fr;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -111,18 +113,21 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		return perf_guest_cbs->get_guest_ip();
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
+
+	if (guest_cbs && guest_cbs->is_in_guest())
+		return guest_cbs->get_guest_ip();
 
 	return instruction_pointer(regs);
 }
 
 unsigned long perf_misc_flags(struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	int misc = 0;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		if (perf_guest_cbs->is_user_mode())
+	if (guest_cbs && guest_cbs->is_in_guest()) {
+		if (guest_cbs->is_user_mode())
 			misc |= PERF_RECORD_MISC_GUEST_USER;
 		else
 			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
diff --git linux-libre-5.15-gnu/arch/arm/kernel/signal.c linux-libre-5.15.126-gnu/arch/arm/kernel/signal.c
index a41e27ace391..539897ac2828 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/signal.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/signal.c
@@ -708,6 +708,7 @@ static_assert(offsetof(siginfo_t, si_upper)	== 0x18);
 static_assert(offsetof(siginfo_t, si_pkey)	== 0x14);
 static_assert(offsetof(siginfo_t, si_perf_data)	== 0x10);
 static_assert(offsetof(siginfo_t, si_perf_type)	== 0x14);
+static_assert(offsetof(siginfo_t, si_perf_flags) == 0x18);
 static_assert(offsetof(siginfo_t, si_band)	== 0x0c);
 static_assert(offsetof(siginfo_t, si_fd)	== 0x10);
 static_assert(offsetof(siginfo_t, si_call_addr)	== 0x0c);
diff --git linux-libre-5.15-gnu/arch/arm/kernel/smp.c linux-libre-5.15.126-gnu/arch/arm/kernel/smp.c
index 842427ff2b3c..23d369ab7e03 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/smp.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/smp.c
@@ -622,11 +622,6 @@ static void ipi_complete(unsigned int cpu)
 /*
  * Main handler for inter-processor interrupts
  */
-asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
-{
-	handle_IPI(ipinr, regs);
-}
-
 static void do_handle_IPI(int ipinr)
 {
 	unsigned int cpu = smp_processor_id();
diff --git linux-libre-5.15-gnu/arch/arm/kernel/spectre.c linux-libre-5.15.126-gnu/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git linux-libre-5.15-gnu/arch/arm/kernel/stacktrace.c linux-libre-5.15.126-gnu/arch/arm/kernel/stacktrace.c
index 76ea4178a55c..824774999825 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/stacktrace.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/stacktrace.c
@@ -53,18 +53,17 @@ int notrace unwind_frame(struct stackframe *frame)
 		return -EINVAL;
 
 	frame->sp = frame->fp;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = frame->lr;
-	frame->lr = *(unsigned long *)(fp + 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
 #else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
+	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
 #endif
 
 	return 0;
diff --git linux-libre-5.15-gnu/arch/arm/kernel/swp_emulate.c linux-libre-5.15.126-gnu/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..b74bfcf94fb1 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/swp_emulate.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/swp_emulate.c
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok((address & ~3), 4)) {
+	if (!access_ok((void __user *)(address & ~3), 4)) {
 		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
 			 (void *)address);
 		res = -EFAULT;
diff --git linux-libre-5.15-gnu/arch/arm/kernel/traps.c linux-libre-5.15.126-gnu/arch/arm/kernel/traps.c
index 195dff58bafc..91e757bb054e 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/traps.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
@@ -333,7 +334,7 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
 	if (panic_on_oops)
 		panic("Fatal exception");
 	if (signr)
-		do_exit(signr);
+		make_task_dead(signr);
 }
 
 /*
@@ -574,7 +575,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(start, end - start))
+	if (!access_ok((void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_cache_op(start, end);
@@ -787,10 +788,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state > SYSTEM_SCHEDULING) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -811,17 +861,20 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
-#endif
 }
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/kernel/unwind.c linux-libre-5.15.126-gnu/arch/arm/kernel/unwind.c
index 59fdf257bf8b..d91ed8e4310c 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/unwind.c
+++ linux-libre-5.15.126-gnu/arch/arm/kernel/unwind.c
@@ -301,6 +301,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -354,7 +377,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
diff --git linux-libre-5.15-gnu/arch/arm/lib/bitops.h linux-libre-5.15.126-gnu/arch/arm/lib/bitops.h
index 95bd35991288..f069d1b2318e 100644
--- linux-libre-5.15-gnu/arch/arm/lib/bitops.h
+++ linux-libre-5.15.126-gnu/arch/arm/lib/bitops.h
@@ -28,7 +28,7 @@ UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
 
-	.macro	testop, name, instr, store
+	.macro	__testop, name, instr, store, barrier
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
@@ -38,7 +38,7 @@ UNWIND(	.fnstart	)
 	mov	r0, r0, lsr #5
 	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
-	smp_dmb
+	\barrier
 #if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
 	.arch_extension	mp
 	ALT_SMP(W(pldw)	[r1])
@@ -50,13 +50,21 @@ UNWIND(	.fnstart	)
 	strex	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
-	smp_dmb
+	\barrier
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
+
+	.macro	testop, name, instr, store
+	__testop \name, \instr, \store, smp_dmb
+	.endm
+
+	.macro	sync_testop, name, instr, store
+	__testop \name, \instr, \store, __smp_dmb
+	.endm
 #else
 	.macro	bitop, name, instr
 ENTRY(	\name		)
diff --git linux-libre-5.15-gnu/arch/arm/lib/findbit.S linux-libre-5.15.126-gnu/arch/arm/lib/findbit.S
index b5e8b9ae4c7d..7fd3600db8ef 100644
--- linux-libre-5.15-gnu/arch/arm/lib/findbit.S
+++ linux-libre-5.15.126-gnu/arch/arm/lib/findbit.S
@@ -40,8 +40,8 @@ ENDPROC(_find_first_zero_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_zero_bit_le)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -81,8 +81,8 @@ ENDPROC(_find_first_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_bit_le)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -115,8 +115,8 @@ ENTRY(_find_first_zero_bit_be)
 ENDPROC(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
@@ -149,8 +149,8 @@ ENTRY(_find_first_bit_be)
 ENDPROC(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
diff --git linux-libre-5.15-gnu/arch/arm/lib/testchangebit.S linux-libre-5.15.126-gnu/arch/arm/lib/testchangebit.S
index 4ebecc67e6e0..f13fe9bc2399 100644
--- linux-libre-5.15-gnu/arch/arm/lib/testchangebit.S
+++ linux-libre-5.15.126-gnu/arch/arm/lib/testchangebit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_change_bit, eor, str
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_change_bit, eor, str
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/lib/testclearbit.S linux-libre-5.15.126-gnu/arch/arm/lib/testclearbit.S
index 009afa0f5b4a..4d2c5ca620eb 100644
--- linux-libre-5.15-gnu/arch/arm/lib/testclearbit.S
+++ linux-libre-5.15.126-gnu/arch/arm/lib/testclearbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_clear_bit, bicne, strne
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_clear_bit, bicne, strne
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/lib/testsetbit.S linux-libre-5.15.126-gnu/arch/arm/lib/testsetbit.S
index f3192e55acc8..649dbab65d8d 100644
--- linux-libre-5.15-gnu/arch/arm/lib/testsetbit.S
+++ linux-libre-5.15.126-gnu/arch/arm/lib/testsetbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_set_bit, orreq, streq
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_set_bit, orreq, streq
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/lib/uaccess_with_memcpy.c linux-libre-5.15.126-gnu/arch/arm/lib/uaccess_with_memcpy.c
index 106f83a5ea6d..35e03f6a6212 100644
--- linux-libre-5.15-gnu/arch/arm/lib/uaccess_with_memcpy.c
+++ linux-libre-5.15.126-gnu/arch/arm/lib/uaccess_with_memcpy.c
@@ -121,7 +121,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memcpy((void *)to, from, tocopy);
+		__memcpy((void *)to, from, tocopy);
 		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
@@ -188,7 +188,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memset((void *)addr, 0, tocopy);
+		__memset((void *)addr, 0, tocopy);
 		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
diff --git linux-libre-5.15-gnu/arch/arm/lib/xor-neon.c linux-libre-5.15.126-gnu/arch/arm/lib/xor-neon.c
index b99dd8e1c93f..7ba6cf826162 100644
--- linux-libre-5.15-gnu/arch/arm/lib/xor-neon.c
+++ linux-libre-5.15.126-gnu/arch/arm/lib/xor-neon.c
@@ -26,8 +26,9 @@ MODULE_LICENSE("GPL");
  * While older versions of GCC do not generate incorrect code, they fail to
  * recognize the parallel nature of these functions, and emit plain ARM code,
  * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
+ *
+ * #warning This code requires at least version 4.6 of GCC
  */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"
diff --git linux-libre-5.15-gnu/arch/arm/mach-at91/pm.c linux-libre-5.15.126-gnu/arch/arm/mach-at91/pm.c
index 8711d6824c1f..c8cc993ca8ca 100644
--- linux-libre-5.15-gnu/arch/arm/mach-at91/pm.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-at91/pm.c
@@ -146,7 +146,7 @@ static const struct wakeup_source_info ws_info[] = {
 
 static const struct of_device_id sama5d2_ws_ids[] = {
 	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
-	{ .compatible = "atmel,at91rm9200-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,sama5d2-rtc",		.data = &ws_info[1] },
 	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
@@ -157,24 +157,24 @@ static const struct of_device_id sama5d2_ws_ids[] = {
 };
 
 static const struct of_device_id sam9x60_ws_ids[] = {
-	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sam9x60-rtc",	.data = &ws_info[1] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
-	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "microchip,sam9x60-rtt",	.data = &ws_info[4] },
 	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
 	{ /* sentinel */ }
 };
 
 static const struct of_device_id sama7g5_ws_ids[] = {
-	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
 	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
 	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
-	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
 	{ /* sentinel */ }
 };
 
@@ -350,9 +350,41 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
+	unsigned char modified_gray_code[] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
+		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
+		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
+		0x10, 0x11,
+	};
+	unsigned int tmp, index;
 	int i;
 
 	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
+		/*
+		 * Bootloader will perform DDR recalibration and will try to
+		 * restore the ZQ0SR0 with the value saved here. But the
+		 * calibration is buggy and restoring some values from ZQ0SR0
+		 * is forbidden and risky thus we need to provide processed
+		 * values for these (modified gray code values).
+		 */
+		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+		/* Store pull-down output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+
+		/* Store pull-up output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-down on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-up on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
 		/*
 		 * The 1st 8 words of memory might get corrupted in the process
 		 * of DDR PHY recalibration; it is saved here in securam and it
@@ -841,10 +873,6 @@ static int __init at91_pm_backup_init(void)
 		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
 		if (!located)
 			goto securam_fail;
-
-		/* DDR3PHY_ZQ0SR0 */
-		soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
-							  0x188);
 	}
 
 	return 0;
diff --git linux-libre-5.15-gnu/arch/arm/mach-at91/pm_suspend.S linux-libre-5.15.126-gnu/arch/arm/mach-at91/pm_suspend.S
index fdb4f63ecde4..2f0a370a1309 100644
--- linux-libre-5.15-gnu/arch/arm/mach-at91/pm_suspend.S
+++ linux-libre-5.15.126-gnu/arch/arm/mach-at91/pm_suspend.S
@@ -169,12 +169,23 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
+	/* Disable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 sr_ena_3:
 	/* Power down DDR PHY data receivers. */
@@ -221,10 +232,14 @@ sr_ena_3:
 	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
 	str	tmp1, [r3, #DDR3PHY_DSGCR]
 
-	/* Take DDR PHY's DLL out of bypass mode. */
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+	/* Enable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 	/* Enable quasi-dynamic programming. */
 	mov	tmp1, #0
diff --git linux-libre-5.15-gnu/arch/arm/mach-axxia/platsmp.c linux-libre-5.15.126-gnu/arch/arm/mach-axxia/platsmp.c
index 512943eae30a..2e203626eda5 100644
--- linux-libre-5.15-gnu/arch/arm/mach-axxia/platsmp.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-axxia/platsmp.c
@@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -ENOENT;
 
 	syscon = of_iomap(syscon_np, 0);
+	of_node_put(syscon_np);
 	if (!syscon)
 		return -ENOMEM;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-bcm/bcm_kona_smc.c linux-libre-5.15.126-gnu/arch/arm/mach-bcm/bcm_kona_smc.c
index 43829e49ad93..347bfb7f03e2 100644
--- linux-libre-5.15-gnu/arch/arm/mach-bcm/bcm_kona_smc.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -52,6 +52,7 @@ int __init bcm_kona_smc_init(void)
 		return -ENODEV;
 
 	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	of_node_put(node);
 	if (!prop_val)
 		return -EINVAL;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-cns3xxx/core.c linux-libre-5.15.126-gnu/arch/arm/mach-cns3xxx/core.c
index e4f4b20b83a2..3fc4ec830e3a 100644
--- linux-libre-5.15-gnu/arch/arm/mach-cns3xxx/core.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-cns3xxx/core.c
@@ -372,6 +372,7 @@ static void __init cns3xxx_init(void)
 		/* De-Asscer SATA Reset */
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
 	}
+	of_node_put(dn);
 
 	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
 	if (of_device_is_available(dn)) {
@@ -385,6 +386,7 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
+	of_node_put(dn);
 
 	pm_power_off = cns3xxx_power_off;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-davinci/board-da850-evm.c linux-libre-5.15.126-gnu/arch/arm/mach-davinci/board-da850-evm.c
index 428012687a80..7f7f6bae21c2 100644
--- linux-libre-5.15-gnu/arch/arm/mach-davinci/board-da850-evm.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-davinci/board-da850-evm.c
@@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void)
 	int ret;
 	u32 val;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+	u8 rmii_en;
 
 	if (!machine_is_davinci_da850_evm())
 		return 0;
 
+	rmii_en = soc_info->emac_pdata->rmii_en;
+
 	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
 
 	val = __raw_readl(cfg_chip3_base);
diff --git linux-libre-5.15-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c linux-libre-5.15.126-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
index dd4b164d1831..a9efa7bc2fa1 100644
--- linux-libre-5.15-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <asm/mach/time.h>
 #include "soc.h"
+#include "platform.h"
 
 /*************************************************************************
  * Timer handling for EP93xx
@@ -60,7 +61,7 @@ static u64 notrace ep93xx_read_sched_clock(void)
 	return ret;
 }
 
-u64 ep93xx_clocksource_read(struct clocksource *c)
+static u64 ep93xx_clocksource_read(struct clocksource *c)
 {
 	u64 ret;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-exynos/Kconfig linux-libre-5.15.126-gnu/arch/arm/mach-exynos/Kconfig
index 5a48abac6af4..4b554cc8fa58 100644
--- linux-libre-5.15-gnu/arch/arm/mach-exynos/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/mach-exynos/Kconfig
@@ -18,7 +18,6 @@ menuconfig ARCH_EXYNOS
 	select EXYNOS_PMU
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
-	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
diff --git linux-libre-5.15-gnu/arch/arm/mach-exynos/exynos.c linux-libre-5.15.126-gnu/arch/arm/mach-exynos/exynos.c
index 8b48326be9fd..51a247ca4da8 100644
--- linux-libre-5.15-gnu/arch/arm/mach-exynos/exynos.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-exynos/exynos.c
@@ -149,6 +149,7 @@ static void exynos_map_pmu(void)
 	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
 	if (np)
 		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 }
 
 static void __init exynos_init_irq(void)
diff --git linux-libre-5.15-gnu/arch/arm/mach-hisi/platsmp.c linux-libre-5.15.126-gnu/arch/arm/mach-hisi/platsmp.c
index a56cc64deeb8..9ce93e0b6cdc 100644
--- linux-libre-5.15-gnu/arch/arm/mach-hisi/platsmp.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-hisi/platsmp.c
@@ -67,14 +67,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
 		}
 		ctrl_base = of_iomap(np, 0);
 		if (!ctrl_base) {
+			of_node_put(np);
 			pr_err("failed to map address\n");
 			return;
 		}
 		if (of_property_read_u32(np, "smp-offset", &offset) < 0) {
+			of_node_put(np);
 			pr_err("failed to find smp-offset property\n");
 			return;
 		}
 		ctrl_base += offset;
+		of_node_put(np);
 	}
 }
 
@@ -160,6 +163,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (WARN_ON(!node))
 		return -1;
 	ctrl_base = of_iomap(node, 0);
+	of_node_put(node);
 
 	/* set the secondary core boot from DDR */
 	remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);
diff --git linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx25.c linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx25.c
index b2e1963f473d..2ee2d2813d57 100644
--- linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx25.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
diff --git linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx27.c linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx27.c
index bf70e13bbe9e..1d2893908368 100644
--- linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx27.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx27.c
@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
diff --git linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx31.c linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx31.c
index b9c24b851d1a..35c544924e50 100644
--- linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx31.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx31.c
@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */
diff --git linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx35.c linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx35.c
index 80e7d8ab9f1b..1fe75b39c2d9 100644
--- linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx35.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx35.c
@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);
diff --git linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx5.c linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- linux-libre-5.15-gnu/arch/arm/mach-imx/cpu-imx5.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git linux-libre-5.15-gnu/arch/arm/mach-imx/mmdc.c linux-libre-5.15.126-gnu/arch/arm/mach-imx/mmdc.c
index af12668d0bf5..b9efe9da06e0 100644
--- linux-libre-5.15-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-imx/mmdc.c
@@ -99,6 +99,7 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
@@ -433,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
 			.task_ctx_nr    = perf_invalid_context,
@@ -452,15 +451,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
 static int imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
 	iounmap(pmu_mmdc->mmdc_base);
@@ -474,7 +474,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
 	const struct of_device_id *of_id =
 		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -497,14 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
 
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
+
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -525,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
 pmu_free:
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S
index 8e6766d4621e..341e5d9a6616 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
 	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
 	cmp     \irqstat, #0
 	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
+	rsbne   \irqnr, \irqnr, #32
 	.endm
 
 	.macro arch_ret_to_user, tmp1, tmp2
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/irqs.h linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/include/mach/irqs.h
index c4e78df428e8..e09ae5f48aec 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/irqs.h
+++ linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -9,6 +9,6 @@
 #ifndef __IRQS_H
 #define __IRQS_H
 
-#define NR_IRQS			32
+#define NR_IRQS			33
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/irq.c linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/irq.c
index 2d48bf1398c1..d1e8824cbd82 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/irq.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/irq.c
@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
-	iop32x_mask &= ~(1 << d->irq);
+	iop32x_mask &= ~(1 << (d->irq - 1));
 	intctl_write(iop32x_mask);
 }
 
 static void
 iop32x_irq_unmask(struct irq_data *d)
 {
-	iop32x_mask |= 1 << d->irq;
+	iop32x_mask |= 1 << (d->irq - 1);
 	intctl_write(iop32x_mask);
 }
 
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
 	    machine_is_em7210())
 		*IOP3XX_PCIIRSR = 0x0f;
 
-	for (i = 0; i < NR_IRQS; i++) {
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
 		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/irqs.h linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/irqs.h
index 69858e4e905d..e1dfc8b4e7d7 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/irqs.h
+++ linux-libre-5.15.126-gnu/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,40 @@
 #ifndef __IOP32X_IRQS_H
 #define __IOP32X_IRQS_H
 
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
 /*
  * IOP80321 chipset interrupts
  */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
+#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
+#define IRQ_IOP32X_SSP		IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
+#define IRQ_IOP32X_HPI		IOP_IRQ(31)
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/mach-mediatek/Kconfig linux-libre-5.15.126-gnu/arch/arm/mach-mediatek/Kconfig
index 9e0f592d87d8..35a3430c7942 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mediatek/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/mach-mediatek/Kconfig
@@ -30,6 +30,7 @@ config MACH_MT7623
 config MACH_MT7629
 	bool "MediaTek MT7629 SoCs support"
 	default ARCH_MEDIATEK
+	select HAVE_ARM_ARCH_TIMER
 
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
diff --git linux-libre-5.15-gnu/arch/arm/mach-meson/platsmp.c linux-libre-5.15.126-gnu/arch/arm/mach-meson/platsmp.c
index 4b8ad728bb42..32ac60b89fdc 100644
--- linux-libre-5.15-gnu/arch/arm/mach-meson/platsmp.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-meson/platsmp.c
@@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	sram_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!sram_base) {
 		pr_err("Couldn't map SRAM registers\n");
 		return;
@@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	scu_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!scu_base) {
 		pr_err("Couldn't map SCU registers\n");
 		return;
diff --git linux-libre-5.15-gnu/arch/arm/mach-mmp/sram.c linux-libre-5.15.126-gnu/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mmp/sram.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
+	if (info->sram_size) {
+		mutex_lock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-mmp/time.c linux-libre-5.15.126-gnu/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..708816caf859 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mmp/time.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-mmp/time.c
@@ -43,18 +43,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
diff --git linux-libre-5.15-gnu/arch/arm/mach-mstar/Kconfig linux-libre-5.15.126-gnu/arch/arm/mach-mstar/Kconfig
index cd300eeedc20..0bf4d312bcfd 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mstar/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/mach-mstar/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
 	select MSTAR_MSC313_MPLL
 	help
diff --git linux-libre-5.15-gnu/arch/arm/mach-mxs/mach-mxs.c linux-libre-5.15.126-gnu/arch/arm/mach-mxs/mach-mxs.c
index 25c9d184fa4c..1c57ac401649 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mxs/mach-mxs.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-mxs/mach-mxs.c
@@ -393,8 +393,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap1/clock.c linux-libre-5.15.126-gnu/arch/arm/mach-omap1/clock.c
index 9d4a0ab50a46..d63d5eb8d8fd 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap1/clock.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap1/clock.c
@@ -41,7 +41,7 @@ static DEFINE_SPINLOCK(clockfw_lock);
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
-	return val & clk->enable_bit ? 48000000 : 12000000;
+	return val & 1 << clk->enable_bit ? 48000000 : 12000000;
 }
 
 unsigned long omap1_sossi_recalc(struct clk *clk)
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap1/timer.c linux-libre-5.15.126-gnu/arch/arm/mach-omap1/timer.c
index 0411d5508d63..7046d7fa7a0a 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap1/timer.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap1/timer.c
@@ -165,7 +165,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/board-generic.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/board-generic.c
index 1610c567a6a3..10d2f078e4a8 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/board-generic.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/board-generic.c
@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/display.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/display.c
index 6daaa645ae5d..8d829f3dafe7 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/display.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/display.c
@@ -211,6 +211,7 @@ static int __init omapdss_init_fbdev(void)
 	node = of_find_node_by_name(NULL, "omap4_padconf_global");
 	if (node)
 		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+	of_node_put(node);
 
 	return 0;
 }
@@ -259,13 +260,15 @@ static int __init omapdss_init_of(void)
 
 	if (!pdev) {
 		pr_err("Unable to find DSS platform device\n");
+		of_node_put(node);
 		return -ENODEV;
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
+	of_node_put(node);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/omap4-common.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..0b80f8bcd304 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/omap4-common.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/omap_hwmod.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/omap_hwmod.c
index 0c2936c7a379..a5e9cffcac10 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/omap_hwmod.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/pdata-quirks.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/pdata-quirks.c
index 765809b214e7..bf50acd6b8a3 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/pdata-quirks.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/pdata-quirks.c
@@ -587,6 +587,8 @@ pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
 
 		of_platform_populate(np, omap_dt_match_table,
 				     omap_auxdata_lookup, NULL);
+
+		of_node_put(np);
 	}
 }
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/prm3xxx.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/prm3xxx.c
index 1b442b128569..63e73e9b82bc 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/prm3xxx.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/prm3xxx.c
@@ -708,6 +708,7 @@ static int omap3xxx_prm_late_init(void)
 	}
 
 	irq_num = of_irq_get(np, 0);
+	of_node_put(np);
 	if (irq_num == -EPROBE_DEFER)
 		return irq_num;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/timer.c linux-libre-5.15.126-gnu/arch/arm/mach-omap2/timer.c
index 620ba69c8f11..5677c4a08f37 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/timer.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git linux-libre-5.15-gnu/arch/arm/mach-orion5x/board-dt.c linux-libre-5.15.126-gnu/arch/arm/mach-orion5x/board-dt.c
index 3d36f1d95196..3f651df3a71c 100644
--- linux-libre-5.15-gnu/arch/arm/mach-orion5x/board-dt.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-orion5x/board-dt.c
@@ -63,6 +63,9 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
+	if (of_machine_is_compatible("lacie,d2-network"))
+		d2net_init();
+
 	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-orion5x/common.h linux-libre-5.15.126-gnu/arch/arm/mach-orion5x/common.h
index eb96009e21c4..b9cfdb456456 100644
--- linux-libre-5.15-gnu/arch/arm/mach-orion5x/common.h
+++ linux-libre-5.15.126-gnu/arch/arm/mach-orion5x/common.h
@@ -75,6 +75,12 @@ extern void mss2_init(void);
 static inline void mss2_init(void) {}
 #endif
 
+#ifdef CONFIG_MACH_D2NET_DT
+void d2net_init(void);
+#else
+static inline void d2net_init(void) {}
+#endif
+
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
diff --git linux-libre-5.15-gnu/arch/arm/mach-pxa/cm-x300.c linux-libre-5.15.126-gnu/arch/arm/mach-pxa/cm-x300.c
index 2e35354b61f5..167e871f059e 100644
--- linux-libre-5.15-gnu/arch/arm/mach-pxa/cm-x300.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-pxa/cm-x300.c
@@ -354,13 +354,13 @@ static struct platform_device cm_x300_spi_gpio = {
 static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
 	.dev_id         = "spi_gpio",
 	.table          = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE,
 			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE,
 			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE,
 			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE,
 			    "cs", GPIO_ACTIVE_HIGH),
 		{ },
 	},
diff --git linux-libre-5.15-gnu/arch/arm/mach-pxa/magician.c linux-libre-5.15.126-gnu/arch/arm/mach-pxa/magician.c
index cd9fa465b9b2..9aee8e0f2bb1 100644
--- linux-libre-5.15-gnu/arch/arm/mach-pxa/magician.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-pxa/magician.c
@@ -681,7 +681,7 @@ static struct platform_device bq24022 = {
 static struct gpiod_lookup_table bq24022_gpiod_table = {
 	.dev_id = "gpio-regulator",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
+		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE,
 			    NULL, GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
 			    "enable", GPIO_ACTIVE_LOW),
diff --git linux-libre-5.15-gnu/arch/arm/mach-pxa/tosa.c linux-libre-5.15.126-gnu/arch/arm/mach-pxa/tosa.c
index 431709725d02..ded5e343e198 100644
--- linux-libre-5.15-gnu/arch/arm/mach-pxa/tosa.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-pxa/tosa.c
@@ -296,9 +296,9 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = {
 	.table = {
 		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
 			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP,
+		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE,
 			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON,
+		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE,
 			    "power", GPIO_ACTIVE_HIGH),
 		{ },
 	},
diff --git linux-libre-5.15-gnu/arch/arm/mach-s3c/irq-s3c24xx.c linux-libre-5.15.126-gnu/arch/arm/mach-s3c/irq-s3c24xx.c
index 3edc5f614eef..c1c2f041ad3b 100644
--- linux-libre-5.15-gnu/arch/arm/mach-s3c/irq-s3c24xx.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -361,11 +361,25 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
 static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
 {
 	do {
-		if (likely(s3c_intc[0]))
-			if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
-				continue;
+		/*
+		 * For platform based machines, neither ERR nor NULL can happen here.
+		 * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
+		 *
+		 *    s3c_intc[0] = s3c24xx_init_intc()
+		 *
+		 * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
+		 *
+		 * For DT machine, s3c_init_intc_of() could set the IRQ handler without
+		 * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
+		 * such code path, so again the s3c_intc[0] will have a valid pointer if
+		 * set_handle_irq() is called.
+		 *
+		 * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
+		 */
+		if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+			continue;
 
-		if (s3c_intc[2])
+		if (!IS_ERR_OR_NULL(s3c_intc[2]))
 			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
 				continue;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-s3c/mach-jive.c linux-libre-5.15.126-gnu/arch/arm/mach-s3c/mach-jive.c
index 0785638a9069..7d15b84ae217 100644
--- linux-libre-5.15-gnu/arch/arm/mach-s3c/mach-jive.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-s3c/mach-jive.c
@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *options)
 	unsigned long set;
 
 	if (options == NULL || options[0] == '\0')
-		return 0;
+		return 1;
 
 	if (kstrtoul(options, 10, &set)) {
 		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 0;
+		return 1;
 	}
 
 	switch (set) {
@@ -255,7 +255,7 @@ static int __init jive_mtdset(char *options)
 		       "using default.", set);
 	}
 
-	return 0;
+	return 1;
 }
 
 /* parse the mtdset= option given to the kernel command line */
diff --git linux-libre-5.15-gnu/arch/arm/mach-s3c/s3c64xx.c linux-libre-5.15.126-gnu/arch/arm/mach-s3c/s3c64xx.c
index 4dfb648142f2..17f006503149 100644
--- linux-libre-5.15-gnu/arch/arm/mach-s3c/s3c64xx.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-s3c/s3c64xx.c
@@ -173,7 +173,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
-void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
 {
 	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
diff --git linux-libre-5.15-gnu/arch/arm/mach-sa1100/jornada720_ssp.c linux-libre-5.15.126-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..9627c4cf3e41 100644
--- linux-libre-5.15-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
  *  arch/arm/mac-sa1100/jornada720_ssp.c
  *
  *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
@@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags;
 
 /**
  * jornada_ssp_reverse - reverses input byte
+ * @byte: input byte to reverse
  *
  * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
@@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
 
 /**
  * jornada_ssp_byte - waits for ready ssp bus and sends byte
+ * @byte: input byte to transmit
  *
  * waits for fifo buffer to clear and then transmits, if it doesn't then we will
  * timeout after <timeout> rounds. Needs mcu running before its called.
@@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
 
 /**
  * jornada_ssp_inout - decide if input is command or trading byte
+ * @byte: input byte to send (may be %TXDUMMY)
  *
  * returns : (jornada_ssp_byte(byte)) on success
  *         : %-ETIMEDOUT on timeout failure
diff --git linux-libre-5.15-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c linux-libre-5.15.126-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3..ba44cec5e59a 100644
--- linux-libre-5.15-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -125,6 +125,7 @@ remove:
 
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
@@ -154,8 +155,10 @@ static int __init rcar_gen2_regulator_quirk(void)
 		return -ENODEV;
 
 	for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
-		if (!of_device_is_available(np))
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
 			break;
+		}
 
 		ret = of_property_read_u32(np, "reg", &addr);
 		if (ret)	/* Skip invalid entry and continue */
@@ -164,6 +167,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
 		if (!quirk) {
 			ret = -ENOMEM;
+			of_node_put(np);
 			goto err_mem;
 		}
 
@@ -171,11 +175,12 @@ static int __init rcar_gen2_regulator_quirk(void)
 		memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
 
 		quirk->id = id;
-		quirk->np = np;
+		quirk->np = of_node_get(np);
 		quirk->i2c_msg.addr = addr;
 
 		ret = of_irq_parse_one(np, 0, argsa);
 		if (ret) {	/* Skip invalid entry and continue */
+			of_node_put(np);
 			kfree(quirk);
 			continue;
 		}
@@ -222,6 +227,7 @@ err_free:
 err_mem:
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-socfpga/Kconfig linux-libre-5.15.126-gnu/arch/arm/mach-socfpga/Kconfig
index 43ddec677c0b..594edf9bbea4 100644
--- linux-libre-5.15-gnu/arch/arm/mach-socfpga/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_INTEL_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git linux-libre-5.15-gnu/arch/arm/mach-socfpga/core.h linux-libre-5.15.126-gnu/arch/arm/mach-socfpga/core.h
index fc2608b18a0d..18f01190dcfd 100644
--- linux-libre-5.15-gnu/arch/arm/mach-socfpga/core.h
+++ linux-libre-5.15.126-gnu/arch/arm/mach-socfpga/core.h
@@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;
 
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
 
 extern unsigned long socfpga_cpu1start_addr;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-socfpga/platsmp.c linux-libre-5.15.126-gnu/arch/arm/mach-socfpga/platsmp.c
index fbb80b883e5d..201191cf68f3 100644
--- linux-libre-5.15-gnu/arch/arm/mach-socfpga/platsmp.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-socfpga/platsmp.c
@@ -20,14 +20,14 @@
 
 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
diff --git linux-libre-5.15-gnu/arch/arm/mach-vexpress/dcscb.c linux-libre-5.15.126-gnu/arch/arm/mach-vexpress/dcscb.c
index a0554d7d04f7..e1adc098f89a 100644
--- linux-libre-5.15-gnu/arch/arm/mach-vexpress/dcscb.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-vexpress/dcscb.c
@@ -144,6 +144,7 @@ static int __init dcscb_init(void)
 	if (!node)
 		return -ENODEV;
 	dcscb_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!dcscb_base)
 		return -EADDRNOTAVAIL;
 	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
diff --git linux-libre-5.15-gnu/arch/arm/mach-vexpress/spc.c linux-libre-5.15.126-gnu/arch/arm/mach-vexpress/spc.c
index 1da11bdb1dfb..1c6500c4e6a1 100644
--- linux-libre-5.15-gnu/arch/arm/mach-vexpress/spc.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-vexpress/spc.c
@@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void)
 		}
 
 		cluster = topology_physical_package_id(cpu_dev->id);
-		if (init_opp_table[cluster])
+		if (cluster < 0 || init_opp_table[cluster])
 			continue;
 
 		if (ve_init_opp_table(cpu_dev))
diff --git linux-libre-5.15-gnu/arch/arm/mach-zynq/common.c linux-libre-5.15.126-gnu/arch/arm/mach-zynq/common.c
index e1ca6a5732d2..15e8a321a713 100644
--- linux-libre-5.15-gnu/arch/arm/mach-zynq/common.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-zynq/common.c
@@ -77,6 +77,7 @@ static int __init zynq_get_revision(void)
 	}
 
 	zynq_devcfg_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!zynq_devcfg_base) {
 		pr_err("%s: Unable to map I/O memory\n", __func__);
 		return -1;
diff --git linux-libre-5.15-gnu/arch/arm/mach-zynq/slcr.c linux-libre-5.15.126-gnu/arch/arm/mach-zynq/slcr.c
index 37707614885a..9765b3f4c2fc 100644
--- linux-libre-5.15-gnu/arch/arm/mach-zynq/slcr.c
+++ linux-libre-5.15.126-gnu/arch/arm/mach-zynq/slcr.c
@@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
 	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
 	if (IS_ERR(zynq_slcr_regmap)) {
 		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git linux-libre-5.15-gnu/arch/arm/mm/Kconfig linux-libre-5.15.126-gnu/arch/arm/mm/Kconfig
index 8355c3895894..f43cdc1cfbae 100644
--- linux-libre-5.15-gnu/arch/arm/mm/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm/mm/Kconfig
@@ -750,7 +750,7 @@ config CPU_BIG_ENDIAN
 config CPU_ENDIAN_BE8
 	bool
 	depends on CPU_BIG_ENDIAN
-	default CPU_V6 || CPU_V6K || CPU_V7
+	default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
 	help
 	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
 
@@ -830,6 +830,7 @@ config CPU_BPREDICT_DISABLE
 
 config CPU_SPECTRE
 	bool
+	select GENERIC_CPU_VULNERABILITIES
 
 config HARDEN_BRANCH_PREDICTOR
 	bool "Harden the branch predictor against aliasing attacks" if EXPERT
@@ -850,6 +851,16 @@ config HARDEN_BRANCH_PREDICTOR
 
 	   If unsure, say Y.
 
+config HARDEN_BRANCH_HISTORY
+	bool "Harden Spectre style attacks against branch history" if EXPERT
+	depends on CPU_SPECTRE
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation. When
+	  taking an exception, a sequence of branches overwrites the branch
+	  history, or branch history is invalidated.
+
 config TLS_REG_EMUL
 	bool
 	select NEED_KUSER_HELPERS
diff --git linux-libre-5.15-gnu/arch/arm/mm/alignment.c linux-libre-5.15.126-gnu/arch/arm/mm/alignment.c
index ea81e89e7740..bcefe3f51744 100644
--- linux-libre-5.15-gnu/arch/arm/mm/alignment.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/alignment.c
@@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:
diff --git linux-libre-5.15-gnu/arch/arm/mm/dump.c linux-libre-5.15.126-gnu/arch/arm/mm/dump.c
index fb688003d156..712da6a81b23 100644
--- linux-libre-5.15-gnu/arch/arm/mm/dump.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/dump.c
@@ -346,7 +346,7 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 		addr = start + i * PMD_SIZE;
 		domain = get_domain_name(pmd);
 		if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd))
-			note_page(st, addr, 3, pmd_val(*pmd), domain);
+			note_page(st, addr, 4, pmd_val(*pmd), domain);
 		else
 			walk_pte(st, pmd, addr, domain);
 
diff --git linux-libre-5.15-gnu/arch/arm/mm/fault.c linux-libre-5.15.126-gnu/arch/arm/mm/fault.c
index efa402025031..af5177801fb1 100644
--- linux-libre-5.15-gnu/arch/arm/mm/fault.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/fault.c
@@ -125,7 +125,7 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	show_pte(KERN_ALERT, mm, addr);
 	die("Oops", regs, fsr);
 	bust_spinlocks(0);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 }
 
 /*
diff --git linux-libre-5.15-gnu/arch/arm/mm/ioremap.c linux-libre-5.15.126-gnu/arch/arm/mm/ioremap.c
index 80fb5a4a5c05..2660bdfcad4d 100644
--- linux-libre-5.15-gnu/arch/arm/mm/ioremap.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/ioremap.c
@@ -479,3 +479,11 @@ void __init early_ioremap_init(void)
 {
 	early_ioremap_setup();
 }
+
+bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+				 unsigned long flags)
+{
+	unsigned long pfn = PHYS_PFN(offset);
+
+	return memblock_is_map_memory(pfn);
+}
diff --git linux-libre-5.15-gnu/arch/arm/mm/kasan_init.c linux-libre-5.15.126-gnu/arch/arm/mm/kasan_init.c
index 9c348042a724..948ada4a2938 100644
--- linux-libre-5.15-gnu/arch/arm/mm/kasan_init.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/kasan_init.c
@@ -226,7 +226,7 @@ void __init kasan_init(void)
 	BUILD_BUG_ON(pgd_index(KASAN_SHADOW_START) !=
 		     pgd_index(KASAN_SHADOW_END));
 	memcpy(tmp_pmd_table,
-	       pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
+	       (void*)pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
 	       sizeof(tmp_pmd_table));
 	set_pgd(&tmp_pgd_table[pgd_index(KASAN_SHADOW_START)],
 		__pgd(__pa(tmp_pmd_table) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
@@ -264,12 +264,17 @@ void __init kasan_init(void)
 
 	/*
 	 * 1. The module global variables are in MODULES_VADDR ~ MODULES_END,
-	 *    so we need to map this area.
+	 *    so we need to map this area if CONFIG_KASAN_VMALLOC=n. With
+	 *    VMALLOC support KASAN will manage this region dynamically,
+	 *    refer to kasan_populate_vmalloc() and ARM's implementation of
+	 *    module_alloc().
 	 * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
 	 *    ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't
 	 *    use kasan_populate_zero_shadow.
 	 */
-	create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE));
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES))
+		create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END));
+	create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE));
 
 	/*
 	 * KAsan may reuse the contents of kasan_early_shadow_pte directly, so
diff --git linux-libre-5.15-gnu/arch/arm/mm/mmu.c linux-libre-5.15.126-gnu/arch/arm/mm/mmu.c
index a4e006005107..83a91e0ab848 100644
--- linux-libre-5.15-gnu/arch/arm/mm/mmu.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/mmu.c
@@ -212,12 +212,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 
@@ -294,6 +296,17 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RO] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN | L_PTE_RDONLY,
+		.prot_l1   = PMD_TYPE_TABLE,
+#ifdef CONFIG_ARM_LPAE
+		.prot_sect = PMD_TYPE_SECT | L_PMD_SECT_RDONLY | PMD_SECT_AP2,
+#else
+		.prot_sect = PMD_TYPE_SECT,
+#endif
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
@@ -390,9 +403,9 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) < FIXADDR_START);
 	BUG_ON(idx >= __end_of_fixed_addresses);
 
-	/* we only support device mappings until pgprot_kernel has been set */
+	/* We support only device mappings before pgprot_kernel is set. */
 	if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
-		    pgprot_val(pgprot_kernel) == 0))
+		    pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
 		return;
 
 	if (pgprot_val(prot))
@@ -487,6 +500,7 @@ static void __init build_mem_type_table(void)
 
 			/* Also setup NX memory mapping */
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -566,6 +580,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
 		/*
@@ -585,6 +600,8 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -645,6 +662,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -1358,7 +1377,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
 		map.virtual = FDT_FIXED_BASE;
 		map.length = FDT_FIXED_SIZE;
-		map.type = MT_ROM;
+		map.type = MT_MEMORY_RO;
 		create_mapping(&map);
 	}
 
diff --git linux-libre-5.15-gnu/arch/arm/mm/nommu.c linux-libre-5.15.126-gnu/arch/arm/mm/nommu.c
index 2658f52903da..80613674deb5 100644
--- linux-libre-5.15-gnu/arch/arm/mm/nommu.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/nommu.c
@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
diff --git linux-libre-5.15-gnu/arch/arm/mm/proc-v7-bugs.c linux-libre-5.15.126-gnu/arch/arm/mm/proc-v7-bugs.c
index 114c05ab4dd9..8bc7a2d6d6c7 100644
--- linux-libre-5.15-gnu/arch/arm/mm/proc-v7-bugs.c
+++ linux-libre-5.15.126-gnu/arch/arm/mm/proc-v7-bugs.c
@@ -6,8 +6,35 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/proc-fns.h>
+#include <asm/spectre.h>
 #include <asm/system_misc.h>
 
+#ifdef CONFIG_ARM_PSCI
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
+
+	switch ((int)res.a0) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+}
+#else
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn);
 
@@ -36,13 +63,60 @@ static void __maybe_unused call_hvc_arch_workaround_1(void)
 	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void cpu_v7_spectre_init(void)
+static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
 	const char *spectre_v2_method = NULL;
 	int cpu = smp_processor_id();
 
 	if (per_cpu(harden_branch_predictor_fn, cpu))
-		return;
+		return SPECTRE_MITIGATED;
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_bpiall;
+		spectre_v2_method = "BPIALL";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_iciallu;
+		spectre_v2_method = "ICIALLU";
+		break;
+
+	case SPECTRE_V2_METHOD_HVC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_hvc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
+		spectre_v2_method = "hypervisor";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_smc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_smc_switch_mm;
+		spectre_v2_method = "firmware";
+		break;
+	}
+
+	if (spectre_v2_method)
+		pr_info("CPU%u: Spectre v2: using %s workaround\n",
+			smp_processor_id(), spectre_v2_method);
+
+	return SPECTRE_MITIGATED;
+}
+#else
+static unsigned int spectre_v2_install_workaround(unsigned int method)
+{
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
+
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
+static void cpu_v7_spectre_v2_init(void)
+{
+	unsigned int state, method = 0;
 
 	switch (read_cpuid_part()) {
 	case ARM_CPU_PART_CORTEX_A8:
@@ -51,69 +125,133 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_bpiall;
-		spectre_v2_method = "BPIALL";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
 		break;
 
 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_iciallu;
-		spectre_v2_method = "ICIALLU";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_ICIALLU;
 		break;
 
-#ifdef CONFIG_ARM_PSCI
 	case ARM_CPU_PART_BRAHMA_B53:
 		/* Requires no workaround */
+		state = SPECTRE_UNAFFECTED;
 		break;
+
 	default:
 		/* Other ARM CPUs require no workaround */
-		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
+		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) {
+			state = SPECTRE_UNAFFECTED;
 			break;
+		}
+
 		fallthrough;
-		/* Cortex A57/A72 require firmware workaround */
-	case ARM_CPU_PART_CORTEX_A57:
-	case ARM_CPU_PART_CORTEX_A72: {
-		struct arm_smccc_res res;
 
-		arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
-				     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
-		if ((int)res.a0 != 0)
-			return;
+	/* Cortex A57/A72 require firmware workaround */
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = spectre_v2_get_cpu_fw_mitigation_state();
+		if (state != SPECTRE_MITIGATED)
+			break;
 
 		switch (arm_smccc_1_1_get_conduit()) {
 		case SMCCC_CONDUIT_HVC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_hvc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
-			spectre_v2_method = "hypervisor";
+			method = SPECTRE_V2_METHOD_HVC;
 			break;
 
 		case SMCCC_CONDUIT_SMC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_smc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
-			spectre_v2_method = "firmware";
+			method = SPECTRE_V2_METHOD_SMC;
 			break;
 
 		default:
+			state = SPECTRE_VULNERABLE;
 			break;
 		}
 	}
-#endif
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_v2_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+static int spectre_bhb_method;
+
+static const char *spectre_bhb_method_name(int method)
+{
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		return "loop";
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		return "BPIALL";
+
+	default:
+		return "unknown";
 	}
+}
 
-	if (spectre_v2_method)
-		pr_info("CPU%u: Spectre v2: using %s workaround\n",
-			smp_processor_id(), spectre_v2_method);
+static int spectre_bhb_install_workaround(int method)
+{
+	if (spectre_bhb_method != method) {
+		if (spectre_bhb_method) {
+			pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n",
+			       smp_processor_id());
+
+			return SPECTRE_VULNERABLE;
+		}
+
+		if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE)
+			return SPECTRE_VULNERABLE;
+
+		spectre_bhb_method = method;
+
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
+
+	return SPECTRE_MITIGATED;
 }
 #else
-static void cpu_v7_spectre_init(void)
+static int spectre_bhb_install_workaround(int method)
 {
+	return SPECTRE_VULNERABLE;
 }
 #endif
 
+static void cpu_v7_spectre_bhb_init(void)
+{
+	unsigned int state, method = 0;
+
+	switch (read_cpuid_part()) {
+	case ARM_CPU_PART_CORTEX_A15:
+	case ARM_CPU_PART_BRAHMA_B15:
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_LOOP8;
+		break;
+
+	case ARM_CPU_PART_CORTEX_A73:
+	case ARM_CPU_PART_CORTEX_A75:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
+		break;
+
+	default:
+		state = SPECTRE_UNAFFECTED;
+		break;
+	}
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_bhb_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
 static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned,
 						  u32 mask, const char *msg)
 {
@@ -142,16 +280,18 @@ static bool check_spectre_auxcr(bool *warned, u32 bit)
 void cpu_v7_ca8_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
 }
 
 void cpu_v7_ca15_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
 
 void cpu_v7_bugs_init(void)
 {
-	cpu_v7_spectre_init();
+	cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
diff --git linux-libre-5.15-gnu/arch/arm/nwfpe/Makefile linux-libre-5.15.126-gnu/arch/arm/nwfpe/Makefile
index 303400fa2cdf..2aec85ab1e8b 100644
--- linux-libre-5.15-gnu/arch/arm/nwfpe/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm/nwfpe/Makefile
@@ -11,3 +11,9 @@ nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
+
+# Try really hard to avoid generating calls to __aeabi_uldivmod() from
+# float64_rem() due to loop elision.
+ifdef CONFIG_CC_IS_CLANG
+CFLAGS_softfloat.o	+= -mllvm -replexitval=never
+endif
diff --git linux-libre-5.15-gnu/arch/arm/probes/decode.h linux-libre-5.15.126-gnu/arch/arm/probes/decode.h
index 973173598992..facc889d05ee 100644
--- linux-libre-5.15-gnu/arch/arm/probes/decode.h
+++ linux-libre-5.15.126-gnu/arch/arm/probes/decode.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/Makefile linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/Makefile
index 14db56f49f0a..6159010dac4a 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/Makefile
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
+KASAN_SANITIZE_actions-common.o := n
+KASAN_SANITIZE_actions-arm.o := n
+KASAN_SANITIZE_actions-thumb.o := n
 obj-$(CONFIG_KPROBES)		+= core.o actions-common.o checkers-common.o
 obj-$(CONFIG_ARM_KPROBES_TEST)	+= test-kprobes.o
 test-kprobes-objs		:= test-core.o
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/checkers-common.c linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/checkers-common.c
index 4d720990cf2a..eba7ac4725c0 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/checkers-common.c
+++ linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/checkers-common.c
@@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn,
  * Different from other insn uses imm8, the real addressing offset of
  * STRD in T32 encoding should be imm8 * 4. See ARMARM description.
  */
-enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
+static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
 		struct arch_probes_insn *asi,
 		const struct decode_header *h)
 {
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/core.c linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/core.c
index 9d8634e2f12f..3bd017f6e256 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/core.c
+++ linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/core.c
@@ -11,6 +11,8 @@
  * Copyright (C) 2007 Marvell Ltd.
  */
 
+#define pr_fmt(fmt) "kprobes: " fmt
+
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
@@ -231,7 +233,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
  * kprobe, and that level is reserved for user kprobe handlers, so we can't
  * risk encountering a new kprobe in an interrupt handler.
  */
-void __kprobes kprobe_handler(struct pt_regs *regs)
+static void __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p, *cur;
 	struct kprobe_ctlblk *kcb;
@@ -278,7 +280,7 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 				break;
 			case KPROBE_REENTER:
 				/* A nested probe was hit in FIQ, it is a BUG */
-				pr_warn("Unrecoverable kprobe detected.\n");
+				pr_warn("Failed to recover from reentered kprobes.\n");
 				dump_kprobe(p);
 				fallthrough;
 			default:
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/opt-arm.c linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/opt-arm.c
index c78180172120..e20304f1d8bc 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/opt-arm.c
+++ linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/opt-arm.c
@@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
 	}
 }
 
-extern void kprobe_handler(struct pt_regs *regs);
-
 static void
 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/test-core.c linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/test-core.c
index c562832b8627..171c7076b89f 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/test-core.c
+++ linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/test-core.c
@@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = {
 	[REG_TYPE_NOSPPCX]	= COVERAGE_ANY_REG | COVERAGE_SP,
 };
 
-unsigned coverage_start_registers(const struct decode_header *h)
+static unsigned coverage_start_registers(const struct decode_header *h)
 {
 	unsigned regs = 0;
 	int i;
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/test-core.h linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/test-core.h
index f1d5583e7bbb..7054d9fae2ea 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/test-core.h
+++ linux-libre-5.15.126-gnu/arch/arm/probes/kprobes/test-core.h
@@ -454,3 +454,7 @@ void kprobe_thumb32_test_cases(void);
 #else
 void kprobe_arm_test_cases(void);
 #endif
+
+void __kprobes_test_case_start(void);
+void __kprobes_test_case_end_16(void);
+void __kprobes_test_case_end_32(void);
diff --git linux-libre-5.15-gnu/arch/arm/xen/p2m.c linux-libre-5.15.126-gnu/arch/arm/xen/p2m.c
index 84a1cea1f43b..309648c17f48 100644
--- linux-libre-5.15-gnu/arch/arm/xen/p2m.c
+++ linux-libre-5.15.126-gnu/arch/arm/xen/p2m.c
@@ -63,11 +63,12 @@ out:
 
 unsigned long __pfn_to_mfn(unsigned long pfn)
 {
-	struct rb_node *n = phys_to_mach.rb_node;
+	struct rb_node *n;
 	struct xen_p2m_entry *entry;
 	unsigned long irqflags;
 
 	read_lock_irqsave(&p2m_lock, irqflags);
+	n = phys_to_mach.rb_node;
 	while (n) {
 		entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 		if (entry->pfn <= pfn &&
@@ -152,10 +153,11 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
 	int rc;
 	unsigned long irqflags;
 	struct xen_p2m_entry *p2m_entry;
-	struct rb_node *n = phys_to_mach.rb_node;
+	struct rb_node *n;
 
 	if (mfn == INVALID_P2M_ENTRY) {
 		write_lock_irqsave(&p2m_lock, irqflags);
+		n = phys_to_mach.rb_node;
 		while (n) {
 			p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 			if (p2m_entry->pfn <= pfn &&
diff --git linux-libre-5.15-gnu/arch/arm64/Kconfig linux-libre-5.15.126-gnu/arch/arm64/Kconfig
index fee914c716aa..5ab4b0520eab 100644
--- linux-libre-5.15-gnu/arch/arm64/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm64/Kconfig
@@ -154,7 +154,6 @@ config ARM64
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
-	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
@@ -221,6 +220,7 @@ config ARM64
 	select THREAD_INFO_IN_TASK
 	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
 	select TRACE_IRQFLAGS_SUPPORT
+	select TRACE_IRQFLAGS_NMI_SUPPORT
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
@@ -487,6 +487,22 @@ config ARM64_ERRATUM_834220
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1742098
+	bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
+	depends on COMPAT
+	default y
+	help
+	  This option removes the AES hwcap for aarch32 user-space to
+	  workaround erratum 1742098 on Cortex-A57 and Cortex-A72.
+
+	  Affected parts may corrupt the AES state if an interrupt is
+	  taken between a pair of AES instructions. These instructions
+	  are only present if the cryptography extensions are present.
+	  All software should have a fallback implementation for CPUs
+	  that don't implement the cryptography extensions.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_845719
 	bool "Cortex-A53: 845719: a load might read incorrect data"
 	depends on COMPAT
@@ -596,6 +612,23 @@ config ARM64_ERRATUM_1530923
 config ARM64_WORKAROUND_REPEAT_TLBI
 	bool
 
+config ARM64_ERRATUM_2441007
+	bool "Cortex-A55: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A55 erratum #2441007.
+
+	  Under very rare circumstances, affected Cortex-A55 CPUs
+	  may not handle a race between a break-before-make sequence on one
+	  CPU, and another CPU accessing the same page. This could allow a
+	  store to a page that has been unmapped.
+
+	  Work around this by adding the affected CPUs to the list that needs
+	  TLB sequences to be done twice.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_1286807
 	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
 	default y
@@ -666,6 +699,155 @@ config ARM64_ERRATUM_1508412
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2441009
+	bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A510 erratum #2441009.
+
+	  Under very rare circumstances, affected Cortex-A510 CPUs
+	  may not handle a race between a break-before-make sequence on one
+	  CPU, and another CPU accessing the same page. This could allow a
+	  store to a page that has been unmapped.
+
+	  Work around this by adding the affected CPUs to the list that needs
+	  TLB sequences to be done twice.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2457168
+	bool "Cortex-A510: 2457168: workaround for AMEVCNTR01 incrementing incorrectly"
+	depends on ARM64_AMU_EXTN
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2457168.
+
+	  The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate
+	  as the system counter. On affected Cortex-A510 cores AMEVCNTR01 increments
+	  incorrectly giving a significantly higher output value.
+
+	  Work around this problem by returning 0 when reading the affected counter in
+	  key locations that results in disabling all users of this counter. This effect
+	  is the same to firmware disabling affected counters.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	bool
+
+config ARM64_ERRATUM_2119858
+	bool "Cortex-A710: 2119858: workaround TRBE overwriting trace data in FILL mode"
+	default y
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	depends on CORESIGHT_TRBE
+	select ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	help
+	  This option adds the workaround for ARM Cortex-A710 erratum 2119858.
+
+	  Affected Cortex-A710 cores could overwrite up to 3 cache lines of trace
+	  data at the base of the buffer (pointed to by TRBASER_EL1) in FILL mode in
+	  the event of a WRAP event.
+
+	  Work around the issue by always making sure we move the TRBPTR_EL1 by
+	  256 bytes before enabling the buffer and filling the first 256 bytes of
+	  the buffer with ETM ignore packets upon disabling.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2139208
+	bool "Neoverse-N2: 2139208: workaround TRBE overwriting trace data in FILL mode"
+	default y
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	depends on CORESIGHT_TRBE
+	select ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	help
+	  This option adds the workaround for ARM Neoverse-N2 erratum 2139208.
+
+	  Affected Neoverse-N2 cores could overwrite up to 3 cache lines of trace
+	  data at the base of the buffer (pointed to by TRBASER_EL1) in FILL mode in
+	  the event of a WRAP event.
+
+	  Work around the issue by always making sure we move the TRBPTR_EL1 by
+	  256 bytes before enabling the buffer and filling the first 256 bytes of
+	  the buffer with ETM ignore packets upon disabling.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	bool
+
+config ARM64_ERRATUM_2054223
+	bool "Cortex-A710: 2054223: workaround TSB instruction failing to flush trace"
+	default y
+	select ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	help
+	  Enable workaround for ARM Cortex-A710 erratum 2054223
+
+	  Affected cores may fail to flush the trace data on a TSB instruction, when
+	  the PE is in trace prohibited state. This will cause losing a few bytes
+	  of the trace cached.
+
+	  Workaround is to issue two TSB consecutively on affected cores.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2067961
+	bool "Neoverse-N2: 2067961: workaround TSB instruction failing to flush trace"
+	default y
+	select ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	help
+	  Enable workaround for ARM Neoverse-N2 erratum 2067961
+
+	  Affected cores may fail to flush the trace data on a TSB instruction, when
+	  the PE is in trace prohibited state. This will cause losing a few bytes
+	  of the trace cached.
+
+	  Workaround is to issue two TSB consecutively on affected cores.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	bool
+
+config ARM64_ERRATUM_2253138
+	bool "Neoverse-N2: 2253138: workaround TRBE writing to address out-of-range"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	depends on CORESIGHT_TRBE
+	default y
+	select ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	help
+	  This option adds the workaround for ARM Neoverse-N2 erratum 2253138.
+
+	  Affected Neoverse-N2 cores might write to an out-of-range address, not reserved
+	  for TRBE. Under some conditions, the TRBE might generate a write to the next
+	  virtually addressed page following the last page of the TRBE address space
+	  (i.e., the TRBLIMITR_EL1.LIMIT), instead of wrapping around to the base.
+
+	  Work around this in the driver by always making sure that there is a
+	  page beyond the TRBLIMITR_EL1.LIMIT, within the space allowed for the TRBE.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2224489
+	bool "Cortex-A710: 2224489: workaround TRBE writing to address out-of-range"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	depends on CORESIGHT_TRBE
+	default y
+	select ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	help
+	  This option adds the workaround for ARM Cortex-A710 erratum 2224489.
+
+	  Affected Cortex-A710 cores might write to an out-of-range address, not reserved
+	  for TRBE. Under some conditions, the TRBE might generate a write to the next
+	  virtually addressed page following the last page of the TRBE address space
+	  (i.e., the TRBLIMITR_EL1.LIMIT), instead of wrapping around to the base.
+
+	  Work around this in the driver by always making sure that there is a
+	  page beyond the TRBLIMITR_EL1.LIMIT, within the space allowed for the TRBE.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1053,9 +1235,6 @@ config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
 
-config ARCH_HAS_FILTER_PGPROT
-	def_bool y
-
 # Supported by clang >= 7.0
 config CC_HAVE_SHADOW_CALL_STACK
 	def_bool $(cc-option, -fsanitize=shadow-call-stack -ffixed-x18)
@@ -1184,6 +1363,15 @@ config UNMAP_KERNEL_AT_EL0
 
 	  If unsure, say Y.
 
+config MITIGATE_SPECTRE_BRANCH_HISTORY
+	bool "Mitigate Spectre style attacks against branch history" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation.
+	  When taking an exception from user-space, a sequence of branches
+	  or a firmware call overwrites the branch history.
+
 config RODATA_FULL_DEFAULT_ENABLED
 	bool "Apply r/o permissions of VM areas also to their linear aliases"
 	default y
@@ -1264,7 +1452,8 @@ config KUSER_HELPERS
 
 config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
-	depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
+	depends on !CPU_BIG_ENDIAN
+	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
 	select GENERIC_COMPAT_VDSO
 	default y
 	help
@@ -1602,6 +1791,8 @@ config ARM64_BTI_KERNEL
 	depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697
 	depends on !CC_IS_GCC || GCC_VERSION >= 100100
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671
+	depends on !CC_IS_GCC
 	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
 	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
 	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
diff --git linux-libre-5.15-gnu/arch/arm64/Kconfig.platforms linux-libre-5.15.126-gnu/arch/arm64/Kconfig.platforms
index b0ce18d4cc98..d7772a4c34fe 100644
--- linux-libre-5.15-gnu/arch/arm64/Kconfig.platforms
+++ linux-libre-5.15.126-gnu/arch/arm64/Kconfig.platforms
@@ -259,6 +259,7 @@ config ARCH_INTEL_SOCFPGA
 
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"
+	select IRQ_FASTEOI_HIERARCHY_HANDLERS
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index cc321c04f121..f6d7d7f7fdab 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -343,19 +343,19 @@
 	};
 
 	thermal-zones {
-		cpu-thermal-zone {
+		cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
 		};
 
-		ddr-thermal-zone {
+		ddr-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
 		};
 
-		gpu-thermal-zone {
+		gpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
index 578c37490d90..e39db51eb448 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -4,7 +4,7 @@
  */
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 097a5511523a..09eee653d5ca 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -40,7 +40,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "orangepi:green:status";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
 		};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
index b2657201957e..1afad8b437d7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
@@ -2,7 +2,7 @@
 // Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
 
 / {
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index d13980ed7a79..7ec5ac850a0d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -69,7 +69,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 578a63dedf46..9988e87ea7b3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -217,7 +217,7 @@
 			};
 		};
 
-		gpu_thermal {
+		gpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
index 8c6e8536b69f..0baf0f8e4d27 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
@@ -3,7 +3,7 @@
 // Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
 
 / {
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "allwinner,sun50i-h6-operating-points";
 		nvmem-cells = <&cpu_speed_grade>;
 		opp-shared;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index d301ac0d406b..3ec301bd08a9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -594,7 +594,7 @@
 		};
 
 		qspi: spi@ff8d2000 {
-			compatible = "cdns,qspi-nor";
+			compatible =  "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff8d2000 0x100>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 46e558ab7729..f0e8af12442a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -129,7 +129,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index f9b4a39683cf..92ac3c86ebd5 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -162,7 +162,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 3f5254eeb47b..db5a1f465313 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -152,7 +152,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: clock-controller {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -161,7 +161,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1885,7 +1885,7 @@
 			sd_emmc_b: sd@5000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,
 					<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -1897,7 +1897,7 @@
 			sd_emmc_c: mmc@7000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
 					<&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 00c6f53290d4..369334076467 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -58,7 +58,7 @@
 		secure-monitor = <&sm>;
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-124999998 {
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
@@ -1604,10 +1610,9 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x400>;
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
 
 				canvas: video-lut@48 {
 					compatible = "amlogic,canvas";
@@ -1727,7 +1732,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					internal_ephy: ethernet_phy@8 {
+					internal_ephy: ethernet-phy@8 {
 						compatible = "ethernet-phy-id0180.3301",
 							     "ethernet-phy-ieee802.3-c22";
 						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -2324,7 +2329,7 @@
 		sd_emmc_a: sd@ffe03000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe03000 0x0 0x800>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_A>,
 				 <&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2336,7 +2341,7 @@
 		sd_emmc_b: sd@ffe05000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe05000 0x0 0x800>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_B>,
 				 <&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2348,7 +2353,7 @@
 		sd_emmc_c: mmc@ffe07000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe07000 0x0 0x800>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_C>,
 				 <&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 81269ccc2496..4fb31c2ba31c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index a26bfe72550f..4b5d11e56364 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 579f3d02d613..b4e86196e346 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..6eaceb717d61 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -57,26 +57,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index d61f43052a34..8e9ad1e51d66 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
@@ -71,26 +51,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index f42cf4b8af2d..16dd409051b4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -18,7 +18,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -37,7 +37,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&vsys_3v3>;
+		pwm-supply = <&vsys_3v3>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 344573e157a7..d33e54b5e196 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -130,7 +130,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -149,7 +149,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -217,7 +217,7 @@
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
@@ -607,7 +607,7 @@
 	pinctrl-0 = <&nor_pins>;
 	pinctrl-names = "default";
 
-	mx25u64: spi-flash@0 {
+	mx25u64: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 1e5d0ee5d541..44c23c984034 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
@@ -76,26 +56,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <751000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index feb088504740..b40d2c1002c9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -96,7 +96,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -115,7 +115,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 2d7032f41e4b..772c220c8f49 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -17,7 +17,7 @@
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		update-button {
+		button-update {
 			label = "update";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <1300000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6b457b2c30a4..32cc9fab4490 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
@@ -226,7 +232,7 @@
 			reg = <0x14 0x10>;
 		};
 
-		eth_mac: eth_mac@34 {
+		eth_mac: eth-mac@34 {
 			reg = <0x34 0x10>;
 		};
 
@@ -243,7 +249,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi_clocks@0 {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -525,7 +531,7 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 
-			hwrng: rng {
+			hwrng: rng@0 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x0 0x0 0x4>;
 			};
@@ -596,21 +602,21 @@
 			sd_emmc_a: mmc@70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc@72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc@74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index e8394a8269ee..802faf7e4e3c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -16,7 +16,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d..a4d34398da35 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -64,6 +65,7 @@
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 
 	vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +163,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&vddio_ao18>;
 };
 
 &hdmi_tx_tmds_port {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9ef210f17b4a..393d3cb33b9e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -18,7 +18,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led {
 			label = "n1:white:status";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
index b331a013572f..c490dbbf063b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -79,6 +79,5 @@
 		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-		clock-names = "lpo";
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c3ac531c4f84..350022935052 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -759,7 +759,7 @@
 		};
 	};
 
-	eth-phy-mux {
+	eth-phy-mux@55c {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index effaa138b5f9..38ebe98ba9c6 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -17,13 +17,13 @@
 	compatible = "bananapi,bpi-m5", "amlogic,sm1";
 	model = "Banana Pi BPI-M5";
 
-	adc_keys {
+	adc-keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 2>;
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		key {
+		button-sw3 {
 			label = "SW3";
 			linux,code = <BTN_3>;
 			press-threshold-microvolt = <1700000>;
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
@@ -173,7 +173,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -437,6 +437,7 @@
 		"",
 		"eMMC_RST#", /* BOOT_12 */
 		"eMMC_DS", /* BOOT_13 */
+		"", "",
 		/* GPIOC */
 		"SD_D0_B", /* GPIOC_0 */
 		"SD_D1_B", /* GPIOC_1 */
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index f2c098143594..9c0b544e2209 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -24,7 +24,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&vsys_3v3>;
+		pwm-supply = <&vsys_3v3>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index f3f953225bf5..15fece2e6320 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -76,9 +76,17 @@
 };
 
 &cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
 	cooling-maps {
 		map {
-			trip = <&cpu_passive>;
+			trip = <&cpu_active>;
 			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index fd0ad85c165b..76ad052fbf0c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
@@ -116,7 +116,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -263,6 +263,10 @@
 		reg = <0>;
 		max-speed = <1000>;
 
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
 		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 2194a778973f..a5d79f2f7c19 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -185,7 +185,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1500 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 3d8b1f4f2001..78bdbd2ccc9d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -95,26 +95,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <750000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
index 6288e104a089..a00b0f14c222 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -26,7 +26,8 @@
 		compatible = "arm,mhu", "arm,primecell";
 		reg = <0x0 0x2b1f0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <1>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
@@ -543,8 +544,7 @@
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		/* Standard AXI Translation entries as programmed by EDK2 */
-		dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
-			     <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+		dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
 			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
@@ -597,12 +597,26 @@
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		soc {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		big_cluster_thermal_zone: big-cluster {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/Makefile linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/Makefile
index 11eae3e3a944..bce0a1255453 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/Makefile
@@ -6,6 +6,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb
 
-subdir-y	+= bcm4908
+subdir-y	+= bcmbca
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/Makefile linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
deleted file mode 100644
index cc75854519ac..000000000000
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
deleted file mode 100644
index 66023d553524..000000000000
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "bcm4908.dtsi"
-
-/ {
-	cpus {
-		/delete-node/ cpu@2;
-
-		/delete-node/ cpu@3;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/Makefile linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
new file mode 100644
index 000000000000..dc68357849a9
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4906-netgear-r8000p.dtb \
+				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4908-asus-gt-ac5300.dtb \
+				bcm4908-netgear-raxe500.dtb \
+				bcm4912-asus-gt-ax6000.dtb \
+				bcm94912.dtb \
+				bcm963158.dtb \
+				bcm96858.dtb
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
new file mode 100644
index 000000000000..d084c33d5ca8
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	cpus {
+		/delete-node/ cpu@2;
+
+		/delete-node/ cpu@3;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
new file mode 100644
index 000000000000..3c2cf2d238b6
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "netgear,raxe500", "brcm,bcm4908";
+	model = "Netgear RAXE500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
similarity index 94%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index a5a64d17d9ea..b7db95ce0bbf 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -29,6 +29,8 @@
 			device_type = "cpu";
 			compatible = "brcm,brahma-b53";
 			reg = <0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -251,7 +253,7 @@
 			};
 		};
 
-		procmon: syscon@280000 {
+		procmon: bus@280000 {
 			compatible = "simple-bus";
 			reg = <0x280000 0x1000>;
 			ranges;
@@ -273,9 +275,9 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0xff800000 0x3000>;
 
-		timer: timer@400 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x400 0x3c>;
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
 		};
 
 		gpio0: gpio-controller@500 {
@@ -292,7 +294,7 @@
 			reg = <0x640 0x18>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
-			clock-names = "periph";
+			clock-names = "refclk";
 			status = "okay";
 		};
 
@@ -303,7 +305,7 @@
 			reg = <0x1800 0x600>, <0x2000 0x10>;
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
+			interrupt-names = "nand_ctlrdy";
 			status = "okay";
 
 			nandcs: nand@0 {
@@ -326,12 +328,12 @@
 				#reset-cells = <1>;
 			};
 		};
+	};
 
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&twd>;
+		offset = <0x34>;
+		mask = <1>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
new file mode 100644
index 000000000000..ed554666e95e
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
+	model = "Asus GT-AX6000";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
new file mode 100644
index 000000000000..3d016c2ce675
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm4912", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
new file mode 100644
index 000000000000..13629702f70b
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63158", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
new file mode 100644
index 000000000000..29a880c6c858
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6858", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x62000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
new file mode 100644
index 000000000000..a3623e6f6919
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	model = "Broadcom BCM94912 Reference Board";
+	compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
new file mode 100644
index 000000000000..eba07e0b1ca6
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+	model = "Broadcom BCM963158 Reference Board";
+	compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
new file mode 100644
index 000000000000..0cbf582f5d54
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+	model = "Broadcom BCM96858 Reference Board";
+	compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..12a4b1c03390 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,8 +111,8 @@
 		compatible = "silabs,si3226x";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
 		at25,byte-len = <0x8000>;
 		at25,addr-mode = <2>;
 		at25,page-size = <64>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 2cfeaf3b0a87..8c218689fef7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -687,7 +687,7 @@
 			};
 		};
 
-		sata: ahci@663f2000 {
+		sata: sata@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
 			dma-coherent;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index e22c5e77fecd..9615f3b9ee60 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 79f155dedb2d..e662677a6e28 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -15,6 +15,7 @@
 	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
 
 	aliases {
+		serial0 = &duart0;
 		mmc0 = &esdhc0;
 		mmc1 = &esdhc1;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index bfd14b64567e..2f92e62ecafe 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -272,11 +272,6 @@
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -318,6 +313,15 @@
 
 };
 
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..14856bc79b22 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -70,7 +70,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 01b01e320411..35d1939e690b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -536,9 +536,9 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
-			dmas = <&edma0 1 39>,
-			       <&edma0 1 38>;
-			dma-names = "tx", "rx";
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index eec62c63dafe..9ee9928f71b4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -76,7 +76,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 687fea6d8afa..4e7bd04d9798 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -499,9 +499,9 @@
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
-			dmas = <&edma0 1 39>,
-			       <&edma0 1 38>;
-			dma-names = "tx", "rx";
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index 3063851c2fb9..a9c6682a3955 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -38,7 +38,6 @@
 		powerdn {
 			label = "External Power Down";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
 			linux,code = <KEY_POWER>;
 		};
 
@@ -46,7 +45,6 @@
 		admin {
 			label = "ADMIN button";
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};
@@ -247,7 +245,7 @@
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index f85e437f80b7..63441028622a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -758,6 +758,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -767,6 +770,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -847,7 +853,7 @@
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -857,7 +863,7 @@
 		};
 
 		cluster1_core1_watchdog: wdt@c010000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -867,7 +873,7 @@
 		};
 
 		cluster1_core2_watchdog: wdt@c020000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -877,7 +883,7 @@
 		};
 
 		cluster1_core3_watchdog: wdt@c030000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -887,7 +893,7 @@
 		};
 
 		cluster2_core0_watchdog: wdt@c100000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -897,7 +903,7 @@
 		};
 
 		cluster2_core1_watchdog: wdt@c110000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -907,7 +913,7 @@
 		};
 
 		cluster2_core2_watchdog: wdt@c120000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
@@ -917,7 +923,7 @@
 		};
 
 		cluster2_core3_watchdog: wdt@c130000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe091965..8d96d18c3697 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -44,7 +44,7 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4fcb35f..787e408da002 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 801ba9612d36..12e59777363f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -387,7 +387,7 @@
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -397,7 +397,7 @@
 		};
 
 		cluster1_core1_watchdog: wdt@c010000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -407,7 +407,7 @@
 		};
 
 		cluster2_core0_watchdog: wdt@c100000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -417,7 +417,7 @@
 		};
 
 		cluster2_core1_watchdog: wdt@c110000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -427,7 +427,7 @@
 		};
 
 		cluster3_core0_watchdog: wdt@c200000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -437,7 +437,7 @@
 		};
 
 		cluster3_core1_watchdog: wdt@c210000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -447,7 +447,7 @@
 		};
 
 		cluster4_core0_watchdog: wdt@c300000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -457,7 +457,7 @@
 		};
 
 		cluster4_core1_watchdog: wdt@c310000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
@@ -525,6 +525,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -534,6 +537,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index c4b1a59ba424..1bc7f538f690 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -719,7 +719,7 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 			status = "disabled";
 		};
 
@@ -768,7 +768,7 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
 			status = "disabled";
 		};
 
@@ -1369,6 +1369,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1379,6 +1382,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index a79f42a9618e..639220dbff00 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -38,9 +38,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@@ -49,9 +49,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step= <2>;
@@ -62,9 +62,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 960a802b8b6e..c33892711138 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -26,6 +26,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
 		status = "disabled";
 	};
@@ -36,6 +38,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
 		status = "disabled";
 	};
@@ -46,6 +50,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
 		status = "disabled";
 	};
@@ -56,6 +62,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
 		status = "disabled";
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 6f5e63696ec0..bb18354c10f0 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -70,7 +70,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -166,6 +166,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -185,7 +186,7 @@
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
 		>;
 	};
 
@@ -236,6 +237,8 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
 			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
 		>;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index e033d0257b5a..ff5324e94ee8 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -136,7 +136,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index e99e7644ff39..49d7470812ee 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -123,8 +123,8 @@
 
 		ethphy: ethernet-phy@0 {
 			reg = <0>;
-			reset-assert-us = <100>;
-			reset-deassert-us = <100>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
 			reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..0e8f0d7161ad 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index a003e6af3353..56271abfb7e0 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -601,7 +601,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 1dc9d187601c..a0bd540f27d3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -89,12 +89,12 @@
 		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <125>;
-		touchscreen-size-x = /bits/ 16 <4008>;
+		touchscreen-size-x = <4008>;
 		ti,y-min = /bits/ 16 <282>;
-		touchscreen-size-y = /bits/ 16 <3864>;
+		touchscreen-size-y = <3864>;
 		ti,x-plate-ohms = /bits/ 16 <180>;
-		touchscreen-max-pressure = /bits/ 16 <255>;
-		touchscreen-average-samples = /bits/ 16 <10>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
 		ti,debounce-tol = /bits/ 16 <3>;
 		ti,debounce-rep = /bits/ 16 <1>;
 		ti,settle-delay-usec = /bits/ 16 <150>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 8e4a0ce99790..7ea909a4c1d5 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -103,12 +103,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -166,7 +168,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
 		>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index b7c91bdc21dd..806ee21651d1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -139,12 +139,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };
@@ -231,7 +233,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
 		>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d2ffd62a3bd4..942fed2eed64 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -166,12 +166,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };
@@ -280,7 +282,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
 		>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index bafd5c8ea4e2..f7e41e5c2c7b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -675,6 +675,7 @@
 &usbotg2 {
 	dr_mode = "host";
 	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 02b3e2e9a081..cce0e50cdf51 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -530,7 +530,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mm_uid: unique-id@410 {
+				imx8mm_uid: unique-id@4 {
 					reg = <0x4 0x8>;
 				};
 
@@ -1014,10 +1014,10 @@
 			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 376ca8ff7213..4fc22448e411 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -81,7 +81,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -176,6 +176,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
 	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -202,7 +203,7 @@
 			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
 		>;
 	};
 
@@ -259,6 +260,8 @@
 		fsl,pins = <
 			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
 			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
 		>;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 7dfee715a2c4..d8ce217c6016 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -59,6 +59,10 @@
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "buck1";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b16c7caf34c1..faafefe562e4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -70,12 +70,12 @@
 		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <125>;
-		touchscreen-size-x = /bits/ 16 <4008>;
+		touchscreen-size-x = <4008>;
 		ti,y-min = /bits/ 16 <282>;
-		touchscreen-size-y = /bits/ 16 <3864>;
+		touchscreen-size-y = <3864>;
 		ti,x-plate-ohms = /bits/ 16 <180>;
-		touchscreen-max-pressure = /bits/ 16 <255>;
-		touchscreen-average-samples = /bits/ 16 <10>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
 		ti,debounce-tol = /bits/ 16 <3>;
 		ti,debounce-rep = /bits/ 16 <1>;
 		ti,settle-delay-usec = /bits/ 16 <150>;
@@ -98,11 +98,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy@4 {
+		ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <4>;
 			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
+			/*
+			 * Deassert delay:
+			 * ADIN1300 requires 5ms.
+			 * AR8033   requires 1ms.
+			 */
+			reset-deassert-us = <20000>;
 		};
 	};
 };
@@ -345,7 +351,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
 		>;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 534d9d85fe2b..cbc4b9517c2d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -263,8 +263,9 @@
 				ranges;
 
 				sai2: sai@30020000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -277,8 +278,9 @@
 				};
 
 				sai3: sai@30030000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -291,8 +293,9 @@
 				};
 
 				sai5: sai@30050000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -307,8 +310,9 @@
 				};
 
 				sai6: sai@30060000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -364,8 +368,9 @@
 				};
 
 				sai7: sai@300b0000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -533,7 +538,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mn_uid: unique-id@410 {
+				imx8mn_uid: unique-id@4 {
 					reg = <0x4 0x8>;
 				};
 
@@ -998,7 +1003,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7b99fad6e4d6..5c9fb39dd99e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -285,21 +285,21 @@
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
-			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
-			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
-			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
-			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
-			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
-			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
-			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
-			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x19
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x10
 		>;
 	};
 
@@ -351,21 +351,21 @@
 
 	pinctrl_gpio_led: gpioledgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
 		>;
 	};
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
-			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
 		>;
 	};
 
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
-			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
 		>;
 	};
 
@@ -377,20 +377,20 @@
 
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
-			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
 		>;
 	};
 
 	pinctrl_usb1_vbus: usb1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x19
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x10
 		>;
 	};
 
@@ -402,7 +402,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
 		>;
 	};
 
@@ -414,7 +414,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
 		>;
 	};
 
@@ -426,7 +426,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
 		>;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 984a6b9ded8d..6aa720bafe28 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -116,48 +116,48 @@
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x3
-			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x3
-			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x91
-			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x91
-			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x91
-			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x91
-			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
-			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x1f
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x1f
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x1f
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x1f
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
 			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
 		>;
 	};
 
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
-			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
 		>;
 	};
 
 	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e3
-			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e3
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
 		>;
 	};
 
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x49
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x49
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
 		>;
 	};
 
@@ -175,7 +175,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
 		>;
 	};
 
@@ -187,7 +187,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
 		>;
 	};
 
@@ -199,7 +199,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
 		>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index fc178eebf8aa..8e189d899794 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -98,7 +98,6 @@
 
 		regulators {
 			buck1: BUCK1 {
-				regulator-compatible = "BUCK1";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -107,7 +106,6 @@
 			};
 
 			buck2: BUCK2 {
-				regulator-compatible = "BUCK2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -116,7 +114,6 @@
 			};
 
 			buck4: BUCK4 {
-				regulator-compatible = "BUCK4";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -124,7 +121,6 @@
 			};
 
 			buck5: BUCK5 {
-				regulator-compatible = "BUCK5";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -132,7 +128,6 @@
 			};
 
 			buck6: BUCK6 {
-				regulator-compatible = "BUCK6";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -140,7 +135,6 @@
 			};
 
 			ldo1: LDO1 {
-				regulator-compatible = "LDO1";
 				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -148,7 +142,6 @@
 			};
 
 			ldo2: LDO2 {
-				regulator-compatible = "LDO2";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
@@ -156,7 +149,6 @@
 			};
 
 			ldo3: LDO3 {
-				regulator-compatible = "LDO3";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -164,7 +156,6 @@
 			};
 
 			ldo4: LDO4 {
-				regulator-compatible = "LDO4";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -172,7 +163,6 @@
 			};
 
 			ldo5: LDO5 {
-				regulator-compatible = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 71a7e2c25863..6bd7746ddbdd 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -358,7 +358,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mp_uid: unique-id@420 {
+				imx8mp_uid: unique-id@8 {
 					reg = <0x8 0x8>;
 				};
 
@@ -912,7 +912,7 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
 			};
 
 		};
@@ -953,7 +953,7 @@
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
 			};
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 460ef0d86540..c86cd20d4e70 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -967,6 +967,7 @@
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
 		maxim,over-heat-temp = <700>;
 		maxim,over-volt = <4500>;
 		maxim,rsns-microohm = <5000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index f70fb32b96b0..cf14ab5f7404 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..6e6182709d22 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -339,7 +339,7 @@
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7675524e9ccf..bcf8d7f7fa64 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -524,11 +524,9 @@
 						  <&clk IMX8MQ_VIDEO_PLL1>,
 						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
-				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
-				interconnect-names = "dram";
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};
@@ -559,7 +557,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mq_uid: soc-uid@410 {
+				imx8mq_uid: soc-uid@4 {
 					reg = <0x4 0x8>;
 				};
 
@@ -1125,8 +1123,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1177,8 +1175,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index ce9d3f0b98fc..607cd6b4e972 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -82,8 +82,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
-	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8qm.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index aebbe2b84aa1..a143f38bc78b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -155,7 +155,7 @@
 		};
 
 		clk: clock-controller {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+			compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
 			#clock-cells = <2>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 863232a47004..4497763d57cc 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/hisilicon/hi3660.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 2d5c1a348716..6eabec2602e2 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1087,7 +1087,7 @@
 		};
 
 		watchdog0: watchdog@e8a06000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xe8a06000 0x0 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_OSC32K>,
@@ -1096,7 +1096,7 @@
 		};
 
 		watchdog1: watchdog@e8a07000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xe8a07000 0x0 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_OSC32K>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/hisilicon/hi6220.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index dde9371dc545..e4860b8a638e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -840,7 +840,7 @@
 		};
 
 		watchdog0: watchdog@f8005000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xf8005000 0x0 0x1000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ao_ctrl HI6220_WDT0_PCLK>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 163f33b46e4f..f4270cf18996 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -502,7 +502,7 @@
 		};
 
 		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb00000 0x40000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0>;
@@ -515,7 +515,7 @@
 		};
 
 		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb40000 0x40000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0>;
@@ -628,7 +628,7 @@
 		};
 
 		qspi: spi@ff8d2000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff8d2000 0x100>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index c5eb3604dd5b..119db6b541b7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -71,10 +71,6 @@
 
 &spi0 {
 	flash@0 {
-		spi-max-frequency = <108000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-
 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
@@ -112,7 +108,6 @@
 
 &usb3 {
 	usb-phy = <&usb3_phy>;
-	status = "disabled";
 };
 
 &mdio {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 04da07ae4420..b276dd77df83 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -18,6 +18,7 @@
 
 	aliases {
 		spi0 = &spi0;
+		ethernet0 = &eth0;
 		ethernet1 = &eth1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
@@ -124,9 +125,12 @@
 	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 0>; /* GPIO2_5 */
 	};
 };
 
@@ -138,7 +142,9 @@
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
-	 * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
 	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
 	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
 	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
@@ -147,6 +153,9 @@
 	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
 	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
 	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
 	 */
 	#address-cells = <3>;
 	#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9acc5d2b5a00..0adc194e46d1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -497,7 +497,7 @@
 			 * (totaling 127 MiB) for MEM.
 			 */
 			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
-				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/cn9130.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/cn9130.dtsi
index a2b7e5ec979d..327b04134134 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/marvell/cn9130.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -11,6 +11,13 @@
 	model = "Marvell Armada CN9130 SoC";
 	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
 		     "marvell,armada-ap807";
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
 };
 
 /*
@@ -35,3 +42,11 @@
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE
 #undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 7d369fdd3117..9d20cabf4f69 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -50,7 +50,7 @@
 		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index a9cca9c146fd..993a03d7fff1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -266,7 +266,7 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..dde9ce137b4f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -117,7 +117,7 @@
 		compatible = "simple-bus";
 		ranges;
 
-		gic: interrupt-controller@0c000000 {
+		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
 			interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@0c53a650 {
+		sysirq: intpol-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..c3677d77e0a4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 2f77dc40b9b8..6b99d903b479 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -49,7 +49,7 @@
 		wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 890a942ec608..a4c48b2abd20 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -428,6 +428,7 @@
 	pwm: pwm@11006000 {
 		compatible = "mediatek,mt7622-pwm";
 		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_PWM_SEL>,
 			 <&pericfg CLK_PERI_PWM_PD>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 5ba51b23f68d..ee06c636add9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -281,6 +281,10 @@
 	};
 };
 
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
 	sram-supply = <&mt6358_vsram_gpu_reg>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 409cf827970c..81fde34ffd52 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -299,6 +299,15 @@
 		method          = "smc";
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -610,8 +619,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_CLK13M>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		iommu: iommu@10205000 {
@@ -1212,7 +1220,7 @@
 				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-names = "job", "mmu", "gpu";
 
-			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
 
 			power-domains =
 				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 9757138a8bbd..72f444405ebf 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -39,9 +39,10 @@
 			reg = <0x000>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu1: cpu@100 {
@@ -50,9 +51,10 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu2: cpu@200 {
@@ -61,9 +63,10 @@
 			reg = <0x200>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu3: cpu@300 {
@@ -72,9 +75,10 @@
 			reg = <0x300>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpuoff_l &clusteroff_l>;
+			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu4: cpu@400 {
@@ -83,8 +87,9 @@
 			reg = <0x400>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -94,8 +99,9 @@
 			reg = <0x500>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -105,8 +111,9 @@
 			reg = <0x600>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -116,8 +123,9 @@
 			reg = <0x700>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpuoff_b &clusteroff_b>;
+			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -135,19 +143,16 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
-
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -168,8 +173,8 @@
 		};
 
 		idle-states {
-			entry-method = "arm,psci";
-			cpuoff_l: cpuoff_l {
+			entry-method = "psci";
+			cpu_sleep_l: cpu-sleep-l {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x00010001>;
 				local-timer-stop;
@@ -177,7 +182,7 @@
 				exit-latency-us = <140>;
 				min-residency-us = <780>;
 			};
-			cpuoff_b: cpuoff_b {
+			cpu_sleep_b: cpu-sleep-b {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x00010001>;
 				local-timer-stop;
@@ -185,7 +190,7 @@
 				exit-latency-us = <145>;
 				min-residency-us = <720>;
 			};
-			clusteroff_l: clusteroff_l {
+			cluster_sleep_l: cluster-sleep-l {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x01010002>;
 				local-timer-stop;
@@ -193,7 +198,7 @@
 				exit-latency-us = <155>;
 				min-residency-us = <860>;
 			};
-			clusteroff_b: clusteroff_b {
+			cluster_sleep_b: cluster-sleep-b {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x01010002>;
 				local-timer-stop;
@@ -237,6 +242,12 @@
 		compatible = "simple-bus";
 		ranges;
 
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
@@ -433,7 +444,7 @@
 			clock-names = "spi", "sf", "axi";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		i2c3: i2c3@11cb0000 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index fcddec14738d..54514d62398f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@
 	};
 
 	firmware {
-		optee: optee@4fd00000 {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
@@ -210,7 +210,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0@0 {
+	i2c0_pins_a: i2c0 {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -218,7 +218,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2@0 {
+	i2c2_pins_a: i2c2 {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 787ebcec121d..a6405059636c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -61,7 +61,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	psci {
+	psci: psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 9d1a082de3e2..32bb76b3202a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -6,6 +6,18 @@
 /dts-v1/;
 #include "sparx5.dtsi"
 
+&psci {
+	status = "disabled";
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index e94f8add1a40..5b0bc9aa1a42 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1079,7 +1079,7 @@
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
@@ -1583,6 +1583,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x30000000 0x50000>;
+		no-memory-wc;
 
 		cpu_bpmp_tx: sram@4e000 {
 			reg = <0x4e000 0x1000>;
@@ -1635,7 +1636,7 @@
 		iommus = <&smmu TEGRA186_SID_BPMP>;
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
-		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index c4058ee36fec..1a444705517f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -75,7 +75,7 @@
 
 		/* SDMMC1 (SD/MMC) */
 		mmc@3400000 {
-			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
 		};
 
 		/* SDMMC4 (eMMC) */
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index c8250a3f7891..ca71b71d801a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -818,9 +818,8 @@
 				 <&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
 			clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 			resets = <&bpmp TEGRA194_RESET_HDA>,
-				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>,
-				 <&bpmp TEGRA194_RESET_HDA2CODEC_2X>;
-			reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+			reset-names = "hda", "hda2hdmi";
 			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
 			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
 					<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
@@ -2250,6 +2249,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40000000 0x50000>;
+		no-memory-wc;
 
 		cpu_bpmp_tx: sram@4e000 {
 			reg = <0x4e000 0x1000>;
@@ -2268,7 +2268,7 @@
 		compatible = "nvidia,tegra186-bpmp";
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
-		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 26b3f98a211c..f88dc820389b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1355,8 +1355,9 @@
 			 <&tegra_car TEGRA210_CLK_DFLL_REF>,
 			 <&tegra_car TEGRA210_CLK_I2C5>;
 		clock-names = "soc", "ref", "i2c";
-		resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>;
-		reset-names = "dvco";
+		resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>,
+			 <&tegra_car 155>;
+		reset-names = "dvco", "dfll";
 		#clock-cells = <0>;
 		clock-output-names = "dfllCPU_out";
 		status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index f0efb3a62804..2b4784572220 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -122,21 +122,22 @@
 		};
 	};
 
-	sysram@40000000 {
+	sram@40000000 {
 		compatible = "nvidia,tegra234-sysram", "mmio-sram";
-		reg = <0x0 0x40000000 0x0 0x50000>;
+		reg = <0x0 0x40000000 0x0 0x80000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0x40000000 0x50000>;
+		ranges = <0x0 0x0 0x40000000 0x80000>;
+		no-memory-wc;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			reg = <0x4e000 0x1000>;
+		cpu_bpmp_tx: sram@70000 {
+			reg = <0x70000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			reg = <0x4f000 0x1000>;
+		cpu_bpmp_rx: sram@71000 {
+			reg = <0x71000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
 		};
@@ -146,7 +147,7 @@
 		compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp";
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
-		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index f3c0dbfd0a23..1e9a3f379af1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -5,9 +5,847 @@
 
 /dts-v1/;
 
-#include "apq8016-sbc.dtsi"
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
 	compatible = "qcom,apq8016-sbc", "qcom,apq8016";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart1;
+		usid0 = &pm8916_0;
+		i2c0	= &blsp_i2c2;
+		i2c1	= &blsp_i2c6;
+		i2c3	= &blsp_i2c4;
+		spi0	= &blsp_spi5;
+		spi1	= &blsp_spi3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	camera_vdddo_1v8: camera-vdddo-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	camera_vdda_2v8: camera-vdda-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	camera_vddd_1v5: camera-vddd-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		ramoops@bff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
+
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&msmgpio_leds>,
+			    <&pm8916_gpios_leds>,
+			    <&pm8916_mpps_leds>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "apq8016-sbc:green:user1";
+			gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "apq8016-sbc:green:user2";
+			gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "apq8016-sbc:green:user3";
+			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "apq8016-sbc:green:user4";
+			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "apq8016-sbc:yellow:wlan";
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "apq8016-sbc:blue:bt";
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp_i2c2 {
+	/* On Low speed expansion */
+	status = "okay";
+	label = "LS-I2C0";
+};
+
+&blsp_i2c4 {
+	/* On High speed expansion */
+	status = "okay";
+	label = "HS-I2C2";
+
+	adv_bridge: bridge@39 {
+		status = "okay";
+
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+
+		pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+		avdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
+
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c6 {
+	/* On Low speed expansion */
+	status = "okay";
+	label = "LS-I2C1";
+};
+
+&blsp_spi3 {
+	/* On High speed expansion */
+	status = "okay";
+	label = "HS-SPI1";
+};
+
+&blsp_spi5 {
+	/* On Low speed expansion */
+	status = "okay";
+	label = "LS-SPI0";
+};
+
+&blsp1_uart1 {
+	status = "okay";
+	label = "LS-UART0";
+};
+
+&blsp1_uart2 {
+	status = "okay";
+	label = "LS-UART1";
+};
+
+&camss {
+	status = "okay";
+	ports {
+		port@0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <0 2>;
+				remote-endpoint = <&ov5640_ep>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera_rear@3b {
+		compatible = "ovti,ov5640";
+		reg = <0x3b>;
+
+		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_rear_default>;
+
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <23880000>;
+
+		vdddo-supply = <&camera_vdddo_1v8>;
+		vdda-supply = <&camera_vdda_2v8>;
+		vddd-supply = <&camera_vddd_1v5>;
+
+		/* No camera mezzanine by default */
+		status = "disabled";
+
+		port {
+			ov5640_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <0 2>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&lpass {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+
+	firmware-name = "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+	status = "okay";
+
+	firmware-name = "/*(DEBLOBBED)*/";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+	pinctrl-names = "default", "sleep";
+	qcom,model = "DB410c";
+	qcom,audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	external-dai-link@0 {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	internal-codec-playback-dai-link@0 {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+		};
+	};
+
+	internal-codec-capture-dai-link@0 {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+
+	pinctrl-names = "default", "device";
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcd_codec {
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
+&wcnss_ctrl {
+	firmware-name = "/*(DEBLOBBED)*/";
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s3 {
+		regulator-min-microvolt = <1250000>;
+		regulator-max-microvolt = <1350000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <2150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	l1 {
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+		regulator-allow-set-load;
+		regulator-system-load = <200000>;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * The 96Boards specification expects a 1.8V power rail on the low-speed
+	 * expansion connector that is able to provide at least 0.18W / 100 mA.
+	 * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
+	 * must be specified to ensure the regulators are not put in LPM where they
+	 * would only provide 5 mA.
+	 */
+	l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+
+	l17 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+	};
+};
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&i2c2_default {
+	drive-strength = <16>;
+};
+
+&i2c4_default {
+	drive-strength = <16>;
+};
+
+&i2c6_default {
+	drive-strength = <16>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+&msmgpio {
+	gpio-line-names =
+		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+		"[I2C3_SDA]", /* HSEC pin 38 */
+		"[I2C3_SCL]", /* HSEC pin 36 */
+		"[SPI0_MOSI]", /* LSEC pin 14 */
+		"[SPI0_MISO]", /* LSEC pin 10 */
+		"[SPI0_CS_N]", /* LSEC pin 12 */
+		"[SPI0_CLK]", /* LSEC pin 8 */
+		"HDMI_HPD_N", /* GPIO 20 */
+		"USR_LED_1_CTRL",
+		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+		"[CSI0_MCLK]", /* HSEC pin 15 */
+		"[CSI1_MCLK]", /* HSEC pin 17 */
+		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+		"[I2C2_SDA]", /* HSEC pin 34 */
+		"[I2C2_SCL]", /* HSEC pin 32 */
+		"DSI2HDMI_INT_N",
+		"DSI_SW_SEL_APQ",
+		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+		"FORCED_USB_BOOT",
+		"SD_CARD_DET_N",
+		"[WCSS_BT_SSBI]",
+		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+		"[WCSS_WLAN_DATA_1]",
+		"[WCSS_WLAN_DATA_0]",
+		"[WCSS_WLAN_SET]",
+		"[WCSS_WLAN_CLK]",
+		"[WCSS_FM_SSBI]",
+		"[WCSS_FM_SDI]",
+		"[WCSS_BT_DAT_CTL]",
+		"[WCSS_BT_DAT_STB]",
+		"NC",
+		"NC", /* GPIO 50 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 60 */
+		"NC",
+		"NC",
+		"[CDC_PDM0_CLK]",
+		"[CDC_PDM0_SYNC]",
+		"[CDC_PDM0_TX0]",
+		"[CDC_PDM0_RX0]",
+		"[CDC_PDM0_RX1]",
+		"[CDC_PDM0_RX2]",
+		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+		"NC", /* GPIO 70 */
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 74 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_0", /* GPIO 80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_5",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 90 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 100 */
+		"NC",
+		"NC",
+		"NC",
+		"SSBI_GPS",
+		"NC",
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_SCK]",
+		"[LS_EXP_MI2S_DATA0]",
+		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+		"NC",
+		"[DSI2HDMI_MI2S_WS]",
+		"[DSI2HDMI_MI2S_SCK]",
+		"[DSI2HDMI_MI2S_DATA0]",
+		"USR_LED_2_CTRL", /* GPIO 120 */
+		"SB_HS_ID";
+
+	msmgpio_leds: msmgpio-leds {
+		pins = "gpio21", "gpio120";
+		function = "gpio";
+
+		output-low;
+	};
+
+	usb_id_default: usb-id-default {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <8>;
+		input-enable;
+		bias-pull-up;
+	};
+
+	adv7533_int_active: adv533-int-active {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	adv7533_switch_active: adv7533-switch-active {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <8>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"USR_LED_3_CTRL",
+		"USR_LED_4_CTRL",
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM";
+
+	usb_hub_reset_pm: usb-hub-reset-pm {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		input-disable;
+		output-high;
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
+	};
+
+	pm8916_gpios_leds: pm8916-gpios-leds {
+		pins = "gpio1", "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+};
+
+&pm8916_mpps {
+	gpio-line-names =
+		"VDD_PX_BIAS",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916-mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+
+		output-low;
+		power-source = <PM8916_MPP_L5>;	// 1.8V
+	};
+
+	pm8916_mpps_leds: pm8916-mpps-state {
+		pins = "mpp2", "mpp3";
+		function = "digital";
+
+		output-low;
+	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
deleted file mode 100644
index f8d8f3e3664e..000000000000
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ /dev/null
@@ -1,826 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-#include "msm8916-pm8916.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include <dt-bindings/sound/apq8016-lpass.h>
-
-/ {
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp1_uart1;
-		usid0 = &pm8916_0;
-		i2c0	= &blsp_i2c2;
-		i2c1	= &blsp_i2c6;
-		i2c3	= &blsp_i2c4;
-		spi0	= &blsp_spi5;
-		spi1	= &blsp_spi3;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	camera_vdddo_1v8: camera-vdddo-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "camera_vdddo";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	camera_vdda_2v8: camera-vdda-2v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "camera_vdda";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	camera_vddd_1v5: camera-vddd-1v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "camera_vddd";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	reserved-memory {
-		ramoops@bff00000 {
-			compatible = "ramoops";
-			reg = <0x0 0xbff00000 0x0 0x100000>;
-
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			ftrace-size = <0x20000>;
-		};
-	};
-
-	usb2513 {
-		compatible = "smsc,usb3503";
-		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
-		initial-mode = <1>;
-	};
-
-	usb_id: usb-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_id_default>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7533_out>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&msm_key_volp_n_default>;
-
-		button@0 {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&msmgpio_leds>,
-			    <&pm8916_gpios_leds>,
-			    <&pm8916_mpps_leds>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "apq8016-sbc:green:user1";
-			gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "apq8016-sbc:green:user2";
-			gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "apq8016-sbc:green:user3";
-			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "apq8016-sbc:green:user4";
-			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			panic-indicator;
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "apq8016-sbc:yellow:wlan";
-			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		led@6 {
-			label = "apq8016-sbc:blue:bt";
-			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "bluetooth-power";
-			default-state = "off";
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp_i2c2 {
-	/* On Low speed expansion */
-	status = "okay";
-	label = "LS-I2C0";
-};
-
-&blsp_i2c4 {
-	/* On High speed expansion */
-	status = "okay";
-	label = "HS-I2C2";
-
-	adv_bridge: bridge@39 {
-		status = "okay";
-
-		compatible = "adi,adv7533";
-		reg = <0x39>;
-
-		interrupt-parent = <&msmgpio>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-
-		adi,dsi-lanes = <4>;
-		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
-		clock-names = "cec";
-
-		pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
-
-		avdd-supply = <&pm8916_l6>;
-		v1p2-supply = <&pm8916_l6>;
-		v3p3-supply = <&pm8916_l17>;
-
-		pinctrl-names = "default","sleep";
-		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
-		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
-		#sound-dai-cells = <1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7533_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7533_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&blsp_i2c6 {
-	/* On Low speed expansion */
-	status = "okay";
-	label = "LS-I2C1";
-};
-
-&blsp_spi3 {
-	/* On High speed expansion */
-	status = "okay";
-	label = "HS-SPI1";
-};
-
-&blsp_spi5 {
-	/* On Low speed expansion */
-	status = "okay";
-	label = "LS-SPI0";
-};
-
-&blsp1_uart1 {
-	status = "okay";
-	label = "LS-UART0";
-};
-
-&blsp1_uart2 {
-	status = "okay";
-	label = "LS-UART1";
-};
-
-&camss {
-	status = "okay";
-	ports {
-		port@0 {
-			reg = <0>;
-			csiphy0_ep: endpoint {
-				clock-lanes = <1>;
-				data-lanes = <0 2>;
-				remote-endpoint = <&ov5640_ep>;
-				status = "okay";
-			};
-		};
-	};
-};
-
-&cci {
-	status = "okay";
-};
-
-&cci_i2c0 {
-	camera_rear@3b {
-		compatible = "ovti,ov5640";
-		reg = <0x3b>;
-
-		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&camera_rear_default>;
-
-		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <23880000>;
-
-		vdddo-supply = <&camera_vdddo_1v8>;
-		vdda-supply = <&camera_vdda_2v8>;
-		vddd-supply = <&camera_vddd_1v5>;
-
-		/* No camera mezzanine by default */
-		status = "disabled";
-
-		port {
-			ov5640_ep: endpoint {
-				clock-lanes = <1>;
-				data-lanes = <0 2>;
-				remote-endpoint = <&csiphy0_ep>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	data-lanes = <0 1 2 3>;
-	remote-endpoint = <&adv7533_in>;
-};
-
-&lpass {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&pm8916_resin {
-	status = "okay";
-	linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&pronto {
-	status = "okay";
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
-	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-
-	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
-};
-
-&sound {
-	status = "okay";
-
-	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
-	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
-	pinctrl-names = "default", "sleep";
-	qcom,model = "DB410c";
-	qcom,audio-routing =
-		"AMIC2", "MIC BIAS Internal2",
-		"AMIC3", "MIC BIAS External1";
-
-	external-dai-link@0 {
-		link-name = "ADV7533";
-		cpu {
-			sound-dai = <&lpass MI2S_QUATERNARY>;
-		};
-		codec {
-			sound-dai = <&adv_bridge 0>;
-		};
-	};
-
-	internal-codec-playback-dai-link@0 {
-		link-name = "WCD";
-		cpu {
-			sound-dai = <&lpass MI2S_PRIMARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-		};
-	};
-
-	internal-codec-capture-dai-link@0 {
-		link-name = "WCD-Capture";
-		cpu {
-			sound-dai = <&lpass MI2S_TERTIARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
-		};
-	};
-};
-
-&usb {
-	status = "okay";
-	extcon = <&usb_id>, <&usb_id>;
-
-	pinctrl-names = "default", "device";
-	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
-	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
-};
-
-&usb_hs_phy {
-	extcon = <&usb_id>;
-};
-
-&wcd_codec {
-	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-	clock-names = "mclk";
-	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
-	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-};
-
-/* Enable CoreSight */
-&cti0 { status = "okay"; };
-&cti1 { status = "okay"; };
-&cti12 { status = "okay"; };
-&cti13 { status = "okay"; };
-&cti14 { status = "okay"; };
-&cti15 { status = "okay"; };
-&debug0 { status = "okay"; };
-&debug1 { status = "okay"; };
-&debug2 { status = "okay"; };
-&debug3 { status = "okay"; };
-&etf { status = "okay"; };
-&etm0 { status = "okay"; };
-&etm1 { status = "okay"; };
-&etm2 { status = "okay"; };
-&etm3 { status = "okay"; };
-&etr { status = "okay"; };
-&funnel0 { status = "okay"; };
-&funnel1 { status = "okay"; };
-&replicator { status = "okay"; };
-&stm { status = "okay"; };
-&tpiu { status = "okay"; };
-
-&smd_rpm_regulators {
-	vdd_l1_l2_l3-supply = <&pm8916_s3>;
-	vdd_l4_l5_l6-supply = <&pm8916_s4>;
-	vdd_l7-supply = <&pm8916_s4>;
-
-	s3 {
-		regulator-min-microvolt = <375000>;
-		regulator-max-microvolt = <1562000>;
-	};
-
-	s4 {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	l1 {
-		regulator-min-microvolt = <375000>;
-		regulator-max-microvolt = <1525000>;
-	};
-
-	l2 {
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-	};
-
-	l4 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l5 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l6 {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	l7 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l8 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l9 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l10 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l11 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-		regulator-allow-set-load;
-		regulator-system-load = <200000>;
-	};
-
-	l12 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l13 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l14 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	/**
-	 * 1.8v required on LS expansion
-	 * for mezzanine boards
-	 */
-	l15 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-		regulator-always-on;
-	};
-
-	l16 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-
-	l17 {
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	l18 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
-	};
-};
-
-/*
- * 2mA drive strength is not enough when connecting multiple
- * I2C devices with different pull up resistors.
- */
-&i2c2_default {
-	drive-strength = <16>;
-};
-
-&i2c4_default {
-	drive-strength = <16>;
-};
-
-&i2c6_default {
-	drive-strength = <16>;
-};
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- *         NC = not connected (pin out but not routed from the chip to
- *              anything the board)
- *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
- *         LSEC = Low Speed External Connector
- *         HSEC = High Speed External Connector
- *
- * Line names are taken from the schematic "DragonBoard410c"
- * dated monday, august 31, 2015. Page 5 in particular.
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-&msmgpio {
-	gpio-line-names =
-		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
-		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
-		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
-		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
-		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
-		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
-		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
-		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
-		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
-		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
-		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
-		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
-		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
-		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
-		"[I2C3_SDA]", /* HSEC pin 38 */
-		"[I2C3_SCL]", /* HSEC pin 36 */
-		"[SPI0_MOSI]", /* LSEC pin 14 */
-		"[SPI0_MISO]", /* LSEC pin 10 */
-		"[SPI0_CS_N]", /* LSEC pin 12 */
-		"[SPI0_CLK]", /* LSEC pin 8 */
-		"HDMI_HPD_N", /* GPIO 20 */
-		"USR_LED_1_CTRL",
-		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
-		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
-		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
-		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
-		"[CSI0_MCLK]", /* HSEC pin 15 */
-		"[CSI1_MCLK]", /* HSEC pin 17 */
-		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
-		"[I2C2_SDA]", /* HSEC pin 34 */
-		"[I2C2_SCL]", /* HSEC pin 32 */
-		"DSI2HDMI_INT_N",
-		"DSI_SW_SEL_APQ",
-		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
-		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
-		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
-		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
-		"FORCED_USB_BOOT",
-		"SD_CARD_DET_N",
-		"[WCSS_BT_SSBI]",
-		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
-		"[WCSS_WLAN_DATA_1]",
-		"[WCSS_WLAN_DATA_0]",
-		"[WCSS_WLAN_SET]",
-		"[WCSS_WLAN_CLK]",
-		"[WCSS_FM_SSBI]",
-		"[WCSS_FM_SDI]",
-		"[WCSS_BT_DAT_CTL]",
-		"[WCSS_BT_DAT_STB]",
-		"NC",
-		"NC", /* GPIO 50 */
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 60 */
-		"NC",
-		"NC",
-		"[CDC_PDM0_CLK]",
-		"[CDC_PDM0_SYNC]",
-		"[CDC_PDM0_TX0]",
-		"[CDC_PDM0_RX0]",
-		"[CDC_PDM0_RX1]",
-		"[CDC_PDM0_RX2]",
-		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
-		"NC", /* GPIO 70 */
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 74 */
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"BOOT_CONFIG_0", /* GPIO 80 */
-		"BOOT_CONFIG_1",
-		"BOOT_CONFIG_2",
-		"BOOT_CONFIG_3",
-		"NC",
-		"NC",
-		"BOOT_CONFIG_5",
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 90 */
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 100 */
-		"NC",
-		"NC",
-		"NC",
-		"SSBI_GPS",
-		"NC",
-		"NC",
-		"KEY_VOLP_N",
-		"NC",
-		"NC",
-		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
-		"NC",
-		"NC",
-		"[LS_EXP_MI2S_SCK]",
-		"[LS_EXP_MI2S_DATA0]",
-		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
-		"NC",
-		"[DSI2HDMI_MI2S_WS]",
-		"[DSI2HDMI_MI2S_SCK]",
-		"[DSI2HDMI_MI2S_DATA0]",
-		"USR_LED_2_CTRL", /* GPIO 120 */
-		"SB_HS_ID";
-
-	msmgpio_leds: msmgpio-leds {
-		pins = "gpio21", "gpio120";
-		function = "gpio";
-
-		output-low;
-	};
-
-	usb_id_default: usb-id-default {
-		pins = "gpio121";
-		function = "gpio";
-
-		drive-strength = <8>;
-		input-enable;
-		bias-pull-up;
-	};
-
-	adv7533_int_active: adv533-int-active {
-		pins = "gpio31";
-		function = "gpio";
-
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	adv7533_int_suspend: adv7533-int-suspend {
-		pins = "gpio31";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	adv7533_switch_active: adv7533-switch-active {
-		pins = "gpio32";
-		function = "gpio";
-
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	adv7533_switch_suspend: adv7533-switch-suspend {
-		pins = "gpio32";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	msm_key_volp_n_default: msm-key-volp-n-default {
-		pins = "gpio107";
-		function = "gpio";
-
-		drive-strength = <8>;
-		input-enable;
-		bias-pull-up;
-	};
-};
-
-&pm8916_gpios {
-	gpio-line-names =
-		"USR_LED_3_CTRL",
-		"USR_LED_4_CTRL",
-		"USB_HUB_RESET_N_PM",
-		"USB_SW_SEL_PM";
-
-	usb_hub_reset_pm: usb-hub-reset-pm {
-		pins = "gpio3";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		input-disable;
-		output-high;
-	};
-
-	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
-		pins = "gpio3";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		output-low;
-	};
-
-	usb_sw_sel_pm: usb-sw-sel-pm {
-		pins = "gpio4";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		power-source = <PM8916_GPIO_VPH>;
-		input-disable;
-		output-high;
-	};
-
-	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
-		pins = "gpio4";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		power-source = <PM8916_GPIO_VPH>;
-		input-disable;
-		output-low;
-	};
-
-	pm8916_gpios_leds: pm8916-gpios-leds {
-		pins = "gpio1", "gpio2";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		output-low;
-	};
-};
-
-&pm8916_mpps {
-	gpio-line-names =
-		"VDD_PX_BIAS",
-		"WLAN_LED_CTRL",
-		"BT_LED_CTRL",
-		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f>;
-
-	ls_exp_gpio_f: pm8916-mpp4 {
-		pins = "mpp4";
-		function = "digital";
-
-		output-low;
-		power-source = <PM8916_MPP_L5>;	// 1.8V
-	};
-
-	pm8916_mpps_leds: pm8916-mpps-leds {
-		pins = "mpp2", "mpp3";
-		function = "digital";
-
-		output-low;
-	};
-};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 757afa27424d..d01a512634cf 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -5,9 +5,1077 @@
 
 /dts-v1/;
 
-#include "apq8096-db820c.dtsi"
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
 
 / {
 	model = "Qualcomm Technologies, Inc. DB820c";
 	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		serial1 = &blsp2_uart3;
+		serial2 = &blsp1_uart2;
+		i2c0	= &blsp1_i2c3;
+		i2c1	= &blsp2_i2c1;
+		i2c2	= &blsp2_i2c1;
+		spi0	= &blsp1_spi1;
+		spi1	= &blsp2_spi6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		divclk4: divclk4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+		};
+
+		div1_mclk: divclk1 {
+			compatible = "gpio-gate-clock";
+			pinctrl-0 = <&audio_mclk>;
+			pinctrl-names = "default";
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			#clock-cells = <0>;
+			enable-gpios = <&pm8994_gpios 15 0>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&blsp2_spi6 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&blsp2_uart3 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart3_4pins_default>;
+	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&pm8994_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+		"TP93", /* GPIO_9 */
+		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+		"NC", /* GPIO_12 */
+		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+		"TP99", /* GPIO_16 */
+		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+		"GPIO-D", /* GPIO_24, LSEC pin 26 */
+		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+		"BLSP6_I2C_SDA", /* GPIO_27 */
+		"BLSP6_I2C_SCL", /* GPIO_28 */
+		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+		"GPIO30", /* GPIO_30, S HSEC pin 4 */
+		"HDMI_CEC", /* GPIO_31 */
+		"HDMI_DDC_CLOCK", /* GPIO_32 */
+		"HDMI_DDC_DATA", /* GPIO_33 */
+		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+		"PCIE0_RST_N", /* GPIO_35 */
+		"PCIE0_CLKREQ_N", /* GPIO_36 */
+		"PCIE0_WAKE", /* GPIO_37 */
+		"SD_CARD_DET_N", /* GPIO_38 */
+		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+		"W_DISABLE_N", /* GPIO_40 */
+		"[BLSP9_UART_TX]", /* GPIO_41 */
+		"[BLSP9_UART_RX]", /* GPIO_42 */
+		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+		"[BLSP3_UART_TX]", /* GPIO_45 */
+		"[BLSP3_UART_RX]", /* GPIO_46 */
+		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+		"[CODEC_INT1_N]", /* GPIO_53 */
+		"[CODEC_INT2_N]", /* GPIO_54 */
+		"[BLSP7_I2C_SDA]", /* GPIO_55 */
+		"[BLSP7_I2C_SCL]", /* GPIO_56 */
+		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+		"GPIO-E", /* GPIO_62, LSEC pin 27 */
+		"TP87", /* GPIO_63 */
+		"[CODEC_RST_N]", /* GPIO_64 */
+		"[PCM1_CLK]", /* GPIO_65 */
+		"[PCM1_SYNC]", /* GPIO_66 */
+		"[PCM1_DIN]", /* GPIO_67 */
+		"[PCM1_DOUT]", /* GPIO_68 */
+		"AUDIO_REF_CLK", /* GPIO_69 */
+		"SLIMBUS_CLK", /* GPIO_70 */
+		"SLIMBUS_DATA0", /* GPIO_71 */
+		"SLIMBUS_DATA1", /* GPIO_72 */
+		"NC", /* GPIO_73 */
+		"NC", /* GPIO_74 */
+		"NC", /* GPIO_75 */
+		"NC", /* GPIO_76 */
+		"TP94", /* GPIO_77 */
+		"NC", /* GPIO_78 */
+		"TP95", /* GPIO_79 */
+		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+		"TP88", /* GPIO_81 */
+		"TP89", /* GPIO_82 */
+		"TP90", /* GPIO_83 */
+		"TP91", /* GPIO_84 */
+		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+		"NC", /* GPIO_92 */
+		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+		"NC", /* GPIO_97 */
+		"CAM1_STANDBY_N", /* GPIO_98 */
+		"NC", /* GPIO_99 */
+		"NC", /* GPIO_100 */
+		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+		"BOOT_CONFIG1", /* GPIO_102 */
+		"USB_HUB_RESET", /* GPIO_103 */
+		"CAM1_RST_N", /* GPIO_104 */
+		"NC", /* GPIO_105 */
+		"NC", /* GPIO_106 */
+		"NC", /* GPIO_107 */
+		"NC", /* GPIO_108 */
+		"NC", /* GPIO_109 */
+		"NC", /* GPIO_110 */
+		"NC", /* GPIO_111 */
+		"NC", /* GPIO_112 */
+		"PMI8994_BUA", /* GPIO_113 */
+		"PCIE2_RST_N", /* GPIO_114 */
+		"PCIE2_CLKREQ_N", /* GPIO_115 */
+		"PCIE2_WAKE", /* GPIO_116 */
+		"SSC_IRQ_0", /* GPIO_117 */
+		"SSC_IRQ_1", /* GPIO_118 */
+		"SSC_IRQ_2", /* GPIO_119 */
+		"NC", /* GPIO_120 */
+		"GPIO121", /* GPIO_121, S HSEC pin 2 */
+		"NC", /* GPIO_122 */
+		"SSC_IRQ_6", /* GPIO_123 */
+		"SSC_IRQ_7", /* GPIO_124 */
+		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+		"BOOT_CONFIG5", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"NC", /* GPIO_128 */
+		"BOOT_CONFIG7", /* GPIO_129 */
+		"PCIE1_RST_N", /* GPIO_130 */
+		"PCIE1_CLKREQ_N", /* GPIO_131 */
+		"PCIE1_WAKE", /* GPIO_132 */
+		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+		"NC", /* GPIO_134 */
+		"NC", /* GPIO_135 */
+		"BOOT_CONFIG8", /* GPIO_136 */
+		"NC", /* GPIO_137 */
+		"NC", /* GPIO_138 */
+		"GPS_SSBI2", /* GPIO_139 */
+		"GPS_SSBI1", /* GPIO_140 */
+		"NC", /* GPIO_141 */
+		"NC", /* GPIO_142 */
+		"NC", /* GPIO_143 */
+		"BOOT_CONFIG6", /* GPIO_144 */
+		"NC", /* GPIO_145 */
+		"NC", /* GPIO_146 */
+		"NC", /* GPIO_147 */
+		"NC", /* GPIO_148 */
+		"NC"; /* GPIO_149 */
+
+	sdc2_cd_on: sdc2_cd_on {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+	};
+
+	sdc2_cd_off: sdc2_cd_off {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	hdmi_hpd_active: hdmi_hpd_active {
+		mux {
+			pins = "gpio34";
+			function = "hdmi_hot";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
+
+	hdmi_hpd_suspend: hdmi_hpd_suspend {
+		mux {
+			pins = "gpio34";
+			function = "hdmi_hot";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down;
+			drive-strength = <2>;
+		};
+	};
+
+	hdmi_ddc_active: hdmi_ddc_active {
+		mux {
+			pins = "gpio32", "gpio33";
+			function = "hdmi_ddc";
+		};
+
+		config {
+			pins = "gpio32", "gpio33";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	hdmi_ddc_suspend: hdmi_ddc_suspend {
+		mux {
+			pins = "gpio32", "gpio33";
+			function = "hdmi_ddc";
+		};
+
+		config {
+			pins = "gpio32", "gpio33";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie2 {
+	status = "okay";
+	perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"BL1_PWM",
+		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+		"BL1_EN",
+		"NC",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"DIVCLK1",
+		"DIVCLK2",
+		"DIVCLK3",
+		"DIVCLK4",
+		"BT_EN",
+		"PMIC_SLB",
+		"PMIC_BUA",
+		"USB_VBUS_DET";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+	ls_exp_gpio_f: pm8994_gpio5 {
+		pinconf {
+			pins = "gpio5";
+			output-low;
+			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+		};
+	};
+
+	bt_en_gpios: bt_en_gpios {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	wlan_en_gpios: wlan_en_gpios {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	audio_mclk: clk_div1 {
+		pinconf {
+			pins = "gpio15";
+			function = "func1";
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
+
+	volume_up_gpio: pm8996_gpio2 {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
+
+	divclk4_pin_a: divclk4 {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+
+	usb3_vbus_det_gpio: pm8996_gpio22 {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"VDDPX_BIAS",
+		"WIFI_LED",
+		"NC",
+		"BT_LED",
+		"PM_MPP05",
+		"PM_MPP06",
+		"PM_MPP07",
+		"NC";
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	s11 {
+		qcom,saw-leader;
+		regulator-always-on;
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",
+		"SPKR_AMP_EN1",
+		"SPKR_AMP_EN2",
+		"TP61",
+		"NC",
+		"USB2_VBUS_DET",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+
+	usb2_vbus_det_gpio: pmi8996_gpio6 {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2@1700 {
+		reg = <0x1700 0x100>;
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p025>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/**
+		 * 1.8v required on LS expansion
+		 * for mezzanine boards
+		 */
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+
+	pmi8994-regulators {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-name = "vph_pwr_bbyp";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_s1b_1p025: s1 {
+			regulator-name = "vreg_s1b_1p025";
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+	};
+};
+
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "DB820c";
+	audio-routing =	"RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI";
+		cpu {
+			sound-dai = <&q6afedai HDMI_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&hdmi 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+	};
+
+		codec {
+			sound-dai = <&wcd9335 6>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 1>;
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+
+	dwc3@7600000 {
+		extcon = <&usb2_id>;
+		dr_mode = "otg";
+		maximum-speed = "high-speed";
+	};
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+
+	dwc3@6a00000 {
+		extcon = <&usb3_id>;
+		dr_mode = "otg";
+	};
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+};
+
+&venus {
+	status = "okay";
+};
+
+&wcd9335 {
+	clock-names = "mclk", "slimbus";
+	clocks = <&div1_mclk>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
deleted file mode 100644
index 51e17094d7b1..000000000000
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ /dev/null
@@ -1,1105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
- */
-
-#include "msm8996.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- *         NC      = not connected (pin out but not routed from the chip to
- *                   anything the board)
- *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
- *         LSEC    = Low Speed External Connector
- *         P HSEC  = Primary High Speed External Connector
- *         S HSEC  = Secondary High Speed External Connector
- *         J14     = Camera Connector
- *         TP      = Test Points
- *
- * Line names are taken from the schematic "DragonBoard 820c",
- * drawing no: LM25-P2751-1
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-/ {
-	aliases {
-		serial0 = &blsp2_uart2;
-		serial1 = &blsp2_uart3;
-		serial2 = &blsp1_uart2;
-		i2c0	= &blsp1_i2c3;
-		i2c1	= &blsp2_i2c1;
-		i2c2	= &blsp2_i2c1;
-		spi0	= &blsp1_spi1;
-		spi1	= &blsp2_spi6;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		divclk4: divclk4 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "divclk4";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&divclk4_pin_a>;
-		};
-
-		div1_mclk: divclk1 {
-			compatible = "gpio-gate-clock";
-			pinctrl-0 = <&audio_mclk>;
-			pinctrl-names = "default";
-			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
-			#clock-cells = <0>;
-			enable-gpios = <&pm8994_gpios 15 0>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&volume_up_gpio>;
-
-		button@0 {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	usb2_id: usb2-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_det_gpio>;
-	};
-
-	usb3_id: usb3-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_det_gpio>;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-always-on;
-		regulator-boot-on;
-
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	wlan_en: wlan-en-1-8v {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_en_gpios>;
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm8994_gpios 8 0>;
-
-		/* WLAN card specific delay */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&blsp1_i2c3 {
-	/* On Low speed expansion */
-	label = "LS-I2C0";
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	/* On Low speed expansion */
-	label = "LS-SPI0";
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	label = "BT-UART";
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart2_default>;
-	pinctrl-1 = <&blsp1_uart2_sleep>;
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		/* bt_disable_n gpio */
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-
-		clocks = <&divclk4>;
-	};
-};
-
-&adsp_pil {
-	status = "okay";
-};
-
-&blsp2_i2c1 {
-	/* On High speed expansion */
-	label = "HS-I2C2";
-	status = "okay";
-};
-
-&blsp2_i2c1 {
-	/* On Low speed expansion */
-	label = "LS-I2C1";
-	status = "okay";
-};
-
-&blsp2_spi6 {
-	/* On High speed expansion */
-	label = "HS-SPI1";
-	status = "okay";
-};
-
-&blsp2_uart2 {
-	label = "LS-UART1";
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_2pins_default>;
-	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
-};
-
-&blsp2_uart3 {
-	label = "LS-UART0";
-	status = "disabled";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart3_4pins_default>;
-	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
-};
-
-&camss {
-	vdda-supply = <&vreg_l2a_1p25>;
-};
-
-&gpu {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
-	core-vdda-supply = <&vreg_l12a_1p8>;
-	core-vcc-supply = <&vreg_s4a_1p8>;
-};
-
-&hdmi_phy {
-	status = "okay";
-
-	vddio-supply = <&vreg_l12a_1p8>;
-	vcca-supply = <&vreg_l28a_0p925>;
-	#phy-cells = <0>;
-};
-
-&hsusb_phy1 {
-	status = "okay";
-
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&hsusb_phy2 {
-	status = "okay";
-
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&mdp {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mmcc {
-	vdd-gfx-supply = <&vdd_gfx>;
-};
-
-&pm8994_resin {
-	status = "okay";
-	linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&tlmm {
-	gpio-line-names =
-		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
-		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
-		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
-		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
-		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
-		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
-		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
-		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
-		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
-		"TP93", /* GPIO_9 */
-		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
-		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
-		"NC", /* GPIO_12 */
-		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
-		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
-		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
-		"TP99", /* GPIO_16 */
-		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
-		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
-		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
-		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
-		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
-		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
-		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
-		"GPIO-D", /* GPIO_24, LSEC pin 26 */
-		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
-		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
-		"BLSP6_I2C_SDA", /* GPIO_27 */
-		"BLSP6_I2C_SCL", /* GPIO_28 */
-		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
-		"GPIO30", /* GPIO_30, S HSEC pin 4 */
-		"HDMI_CEC", /* GPIO_31 */
-		"HDMI_DDC_CLOCK", /* GPIO_32 */
-		"HDMI_DDC_DATA", /* GPIO_33 */
-		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
-		"PCIE0_RST_N", /* GPIO_35 */
-		"PCIE0_CLKREQ_N", /* GPIO_36 */
-		"PCIE0_WAKE", /* GPIO_37 */
-		"SD_CARD_DET_N", /* GPIO_38 */
-		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
-		"W_DISABLE_N", /* GPIO_40 */
-		"[BLSP9_UART_TX]", /* GPIO_41 */
-		"[BLSP9_UART_RX]", /* GPIO_42 */
-		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
-		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
-		"[BLSP3_UART_TX]", /* GPIO_45 */
-		"[BLSP3_UART_RX]", /* GPIO_46 */
-		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
-		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
-		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
-		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
-		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
-		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
-		"[CODEC_INT1_N]", /* GPIO_53 */
-		"[CODEC_INT2_N]", /* GPIO_54 */
-		"[BLSP7_I2C_SDA]", /* GPIO_55 */
-		"[BLSP7_I2C_SCL]", /* GPIO_56 */
-		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
-		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
-		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
-		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
-		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
-		"GPIO-E", /* GPIO_62, LSEC pin 27 */
-		"TP87", /* GPIO_63 */
-		"[CODEC_RST_N]", /* GPIO_64 */
-		"[PCM1_CLK]", /* GPIO_65 */
-		"[PCM1_SYNC]", /* GPIO_66 */
-		"[PCM1_DIN]", /* GPIO_67 */
-		"[PCM1_DOUT]", /* GPIO_68 */
-		"AUDIO_REF_CLK", /* GPIO_69 */
-		"SLIMBUS_CLK", /* GPIO_70 */
-		"SLIMBUS_DATA0", /* GPIO_71 */
-		"SLIMBUS_DATA1", /* GPIO_72 */
-		"NC", /* GPIO_73 */
-		"NC", /* GPIO_74 */
-		"NC", /* GPIO_75 */
-		"NC", /* GPIO_76 */
-		"TP94", /* GPIO_77 */
-		"NC", /* GPIO_78 */
-		"TP95", /* GPIO_79 */
-		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
-		"TP88", /* GPIO_81 */
-		"TP89", /* GPIO_82 */
-		"TP90", /* GPIO_83 */
-		"TP91", /* GPIO_84 */
-		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
-		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
-		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
-		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
-		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
-		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
-		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
-		"NC", /* GPIO_92 */
-		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
-		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
-		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
-		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
-		"NC", /* GPIO_97 */
-		"CAM1_STANDBY_N", /* GPIO_98 */
-		"NC", /* GPIO_99 */
-		"NC", /* GPIO_100 */
-		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
-		"BOOT_CONFIG1", /* GPIO_102 */
-		"USB_HUB_RESET", /* GPIO_103 */
-		"CAM1_RST_N", /* GPIO_104 */
-		"NC", /* GPIO_105 */
-		"NC", /* GPIO_106 */
-		"NC", /* GPIO_107 */
-		"NC", /* GPIO_108 */
-		"NC", /* GPIO_109 */
-		"NC", /* GPIO_110 */
-		"NC", /* GPIO_111 */
-		"NC", /* GPIO_112 */
-		"PMI8994_BUA", /* GPIO_113 */
-		"PCIE2_RST_N", /* GPIO_114 */
-		"PCIE2_CLKREQ_N", /* GPIO_115 */
-		"PCIE2_WAKE", /* GPIO_116 */
-		"SSC_IRQ_0", /* GPIO_117 */
-		"SSC_IRQ_1", /* GPIO_118 */
-		"SSC_IRQ_2", /* GPIO_119 */
-		"NC", /* GPIO_120 */
-		"GPIO121", /* GPIO_121, S HSEC pin 2 */
-		"NC", /* GPIO_122 */
-		"SSC_IRQ_6", /* GPIO_123 */
-		"SSC_IRQ_7", /* GPIO_124 */
-		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
-		"BOOT_CONFIG5", /* GPIO_126 */
-		"NC", /* GPIO_127 */
-		"NC", /* GPIO_128 */
-		"BOOT_CONFIG7", /* GPIO_129 */
-		"PCIE1_RST_N", /* GPIO_130 */
-		"PCIE1_CLKREQ_N", /* GPIO_131 */
-		"PCIE1_WAKE", /* GPIO_132 */
-		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
-		"NC", /* GPIO_134 */
-		"NC", /* GPIO_135 */
-		"BOOT_CONFIG8", /* GPIO_136 */
-		"NC", /* GPIO_137 */
-		"NC", /* GPIO_138 */
-		"GPS_SSBI2", /* GPIO_139 */
-		"GPS_SSBI1", /* GPIO_140 */
-		"NC", /* GPIO_141 */
-		"NC", /* GPIO_142 */
-		"NC", /* GPIO_143 */
-		"BOOT_CONFIG6", /* GPIO_144 */
-		"NC", /* GPIO_145 */
-		"NC", /* GPIO_146 */
-		"NC", /* GPIO_147 */
-		"NC", /* GPIO_148 */
-		"NC"; /* GPIO_149 */
-
-	sdc2_cd_on: sdc2_cd_on {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <16>;	/* 16 MA */
-		};
-	};
-
-	sdc2_cd_off: sdc2_cd_off {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
-	};
-
-	blsp1_uart2_default: blsp1_uart2_default {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "blsp_uart2";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	hdmi_hpd_active: hdmi_hpd_active {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-
-	hdmi_hpd_suspend: hdmi_hpd_suspend {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <2>;
-		};
-	};
-
-	hdmi_ddc_active: hdmi_ddc_active {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	hdmi_ddc_suspend: hdmi_ddc_suspend {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	vddpe-3v3-supply = <&wlan_en>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie1 {
-	status = "okay";
-	perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie2 {
-	status = "okay";
-	perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&pm8994_gpios {
-	gpio-line-names =
-		"NC",
-		"KEY_VOLP_N",
-		"NC",
-		"BL1_PWM",
-		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
-		"BL1_EN",
-		"NC",
-		"WLAN_EN",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"DIVCLK1",
-		"DIVCLK2",
-		"DIVCLK3",
-		"DIVCLK4",
-		"BT_EN",
-		"PMIC_SLB",
-		"PMIC_BUA",
-		"USB_VBUS_DET";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
-	ls_exp_gpio_f: pm8994_gpio5 {
-		pinconf {
-			pins = "gpio5";
-			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
-		};
-	};
-
-	bt_en_gpios: bt_en_gpios {
-		pinconf {
-			pins = "gpio19";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	wlan_en_gpios: wlan_en_gpios {
-		pinconf {
-			pins = "gpio8";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	audio_mclk: clk_div1 {
-		pinconf {
-			pins = "gpio15";
-			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	volume_up_gpio: pm8996_gpio2 {
-		pinconf {
-			pins = "gpio2";
-			function = "normal";
-			input-enable;
-			drive-push-pull;
-			bias-pull-up;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	divclk4_pin_a: divclk4 {
-		pinconf {
-			pins = "gpio18";
-			function = PMIC_GPIO_FUNC_FUNC2;
-
-			bias-disable;
-			power-source = <PM8994_GPIO_S4>;
-		};
-	};
-
-	usb3_vbus_det_gpio: pm8996_gpio22 {
-		pinconf {
-			pins = "gpio22";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
-
-&pm8994_mpps {
-	gpio-line-names =
-		"VDDPX_BIAS",
-		"WIFI_LED",
-		"NC",
-		"BT_LED",
-		"PM_MPP05",
-		"PM_MPP06",
-		"PM_MPP07",
-		"NC";
-};
-
-&pm8994_spmi_regulators {
-	qcom,saw-reg = <&saw3>;
-	s9 {
-		qcom,saw-slave;
-	};
-	s10 {
-		qcom,saw-slave;
-	};
-	s11 {
-		qcom,saw-leader;
-		regulator-always-on;
-		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <980000>;
-	};
-};
-
-&pmi8994_gpios {
-	gpio-line-names =
-		"NC",
-		"SPKR_AMP_EN1",
-		"SPKR_AMP_EN2",
-		"TP61",
-		"NC",
-		"USB2_VBUS_DET",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-
-	usb2_vbus_det_gpio: pmi8996_gpio6 {
-		pinconf {
-			pins = "gpio6";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
-
-&pmi8994_spmi_regulators {
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
-		regulator-name = "VDD_GFX";
-		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <980000>;
-	};
-};
-
-&rpm_requests {
-	pm8994-regulators {
-		compatible = "qcom,rpm-pm8994-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_s4-supply = <&vph_pwr>;
-		vdd_s5-supply = <&vph_pwr>;
-		vdd_s6-supply = <&vph_pwr>;
-		vdd_s7-supply = <&vph_pwr>;
-		vdd_s8-supply = <&vph_pwr>;
-		vdd_s9-supply = <&vph_pwr>;
-		vdd_s10-supply = <&vph_pwr>;
-		vdd_s11-supply = <&vph_pwr>;
-		vdd_s12-supply = <&vph_pwr>;
-		vdd_l1-supply = <&vreg_s1b_1p025>;
-		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
-		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
-		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
-		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
-		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
-		vdd_l8_l16_l30-supply = <&vph_pwr>;
-		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
-		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
-		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
-		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
-		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
-		vdd_l25-supply = <&vreg_s3a_1p3>;
-		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
-
-		vreg_s3a_1p3: s3 {
-			regulator-name = "vreg_s3a_1p3";
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		/**
-		 * 1.8v required on LS expansion
-		 * for mezzanine boards
-		 */
-		vreg_s4a_1p8: s4 {
-			regulator-name = "vreg_s4a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-		vreg_s5a_2p15: s5 {
-			regulator-name = "vreg_s5a_2p15";
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-		vreg_s7a_1p0: s7 {
-			regulator-name = "vreg_s7a_1p0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-		};
-
-		vreg_l1a_1p0: l1 {
-			regulator-name = "vreg_l1a_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-		vreg_l2a_1p25: l2 {
-			regulator-name = "vreg_l2a_1p25";
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1250000>;
-		};
-		vreg_l3a_0p875: l3 {
-			regulator-name = "vreg_l3a_0p875";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <850000>;
-		};
-		vreg_l4a_1p225: l4 {
-			regulator-name = "vreg_l4a_1p225";
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		vreg_l6a_1p2: l6 {
-			regulator-name = "vreg_l6a_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		vreg_l8a_1p8: l8 {
-			regulator-name = "vreg_l8a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l9a_1p8: l9 {
-			regulator-name = "vreg_l9a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l10a_1p8: l10 {
-			regulator-name = "vreg_l10a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l11a_1p15: l11 {
-			regulator-name = "vreg_l11a_1p15";
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-		vreg_l12a_1p8: l12 {
-			regulator-name = "vreg_l12a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l13a_2p95: l13 {
-			regulator-name = "vreg_l13a_2p95";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		vreg_l14a_1p8: l14 {
-			regulator-name = "vreg_l14a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l15a_1p8: l15 {
-			regulator-name = "vreg_l15a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l16a_2p7: l16 {
-			regulator-name = "vreg_l16a_2p7";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		vreg_l17a_2p8: l17 {
-			regulator-name = "vreg_l17a_2p8";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-		vreg_l18a_2p85: l18 {
-			regulator-name = "vreg_l18a_2p85";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2900000>;
-		};
-		vreg_l19a_2p8: l19 {
-			regulator-name = "vreg_l19a_2p8";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-		vreg_l20a_2p95: l20 {
-			regulator-name = "vreg_l20a_2p95";
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-		};
-		vreg_l21a_2p95: l21 {
-			regulator-name = "vreg_l21a_2p95";
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-			regulator-system-load = <200000>;
-		};
-		vreg_l22a_3p0: l22 {
-			regulator-name = "vreg_l22a_3p0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		vreg_l23a_2p8: l23 {
-			regulator-name = "vreg_l23a_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-		vreg_l24a_3p075: l24 {
-			regulator-name = "vreg_l24a_3p075";
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-		vreg_l25a_1p2: l25 {
-			regulator-name = "vreg_l25a_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-allow-set-load;
-		};
-		vreg_l26a_0p8: l27 {
-			regulator-name = "vreg_l26a_0p8";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-		vreg_l28a_0p925: l28 {
-			regulator-name = "vreg_l28a_0p925";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <925000>;
-			regulator-allow-set-load;
-		};
-		vreg_l29a_2p8: l29 {
-			regulator-name = "vreg_l29a_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-		vreg_l30a_1p8: l30 {
-			regulator-name = "vreg_l30a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l32a_1p8: l32 {
-			regulator-name = "vreg_l32a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vreg_lvs1a_1p8: lvs1 {
-			regulator-name = "vreg_lvs1a_1p8";
-		};
-
-		vreg_lvs2a_1p8: lvs2 {
-			regulator-name = "vreg_lvs2a_1p8";
-		};
-	};
-
-	pmi8994-regulators {
-		compatible = "qcom,rpm-pmi8994-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_bst_byp-supply = <&vph_pwr>;
-
-		vph_pwr_bbyp: boost-bypass {
-			regulator-name = "vph_pwr_bbyp";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		vreg_s1b_1p025: s1 {
-			regulator-name = "vreg_s1b_1p025";
-			regulator-min-microvolt = <1025000>;
-			regulator-max-microvolt = <1025000>;
-		};
-	};
-};
-
-&sdhc2 {
-	/* External SD card */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
-	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vreg_l21a_2p95>;
-	vqmmc-supply = <&vreg_l13a_2p95>;
-	status = "okay";
-};
-
-&q6asmdai {
-	dai@0 {
-		reg = <0>;
-	};
-
-	dai@1 {
-		reg = <1>;
-	};
-
-	dai@2 {
-		reg = <2>;
-	};
-};
-
-&sound {
-	compatible = "qcom,apq8096-sndcard";
-	model = "DB820c";
-	audio-routing =	"RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	mm2-dai-link {
-		link-name = "MultiMedia2";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
-		};
-	};
-
-	mm3-dai-link {
-		link-name = "MultiMedia3";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
-		};
-	};
-
-	hdmi-dai-link {
-		link-name = "HDMI";
-		cpu {
-			sound-dai = <&q6afedai HDMI_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&hdmi 0>;
-		};
-	};
-
-	slim-dai-link {
-		link-name = "SLIM Playback";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_6_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-	};
-
-		codec {
-			sound-dai = <&wcd9335 6>;
-		};
-	};
-
-	slimcap-dai-link {
-		link-name = "SLIM Capture";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_TX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9335 1>;
-		};
-	};
-};
-
-&ufsphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
-};
-
-&ufshc {
-	status = "okay";
-
-	vcc-supply = <&vreg_l20a_2p95>;
-	vccq-supply = <&vreg_l25a_1p2>;
-	vccq2-supply = <&vreg_s4a_1p8>;
-
-	vcc-max-microamp = <600000>;
-	vccq-max-microamp = <450000>;
-	vccq2-max-microamp = <450000>;
-};
-
-&usb2 {
-	status = "okay";
-	extcon = <&usb2_id>;
-
-	dwc3@7600000 {
-		extcon = <&usb2_id>;
-		dr_mode = "otg";
-		maximum-speed = "high-speed";
-	};
-};
-
-&usb3 {
-	status = "okay";
-	extcon = <&usb3_id>;
-
-	dwc3@6a00000 {
-		extcon = <&usb3_id>;
-		dr_mode = "otg";
-	};
-};
-
-&usb3phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-
-};
-
-&venus {
-	status = "okay";
-};
-
-&wcd9335 {
-	clock-names = "mclk", "slimbus";
-	clocks = <&div1_mclk>,
-		 <&rpmcc RPM_SMD_BB_CLK1>;
-
-	vdd-buck-supply = <&vreg_s4a_1p8>;
-	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-	vdd-tx-supply = <&vreg_s4a_1p8>;
-	vdd-rx-supply = <&vreg_s4a_1p8>;
-	vdd-io-supply = <&vreg_s4a_1p8>;
-};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index a57c60070cdc..f0a98ab1616a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -26,7 +26,7 @@
 
 	v1p05: v1p05-regulator {
 		compatible = "regulator-fixed";
-		reglator-name = "v1p05";
+		regulator-name = "v1p05";
 		regulator-always-on;
 		regulator-boot-on;
 
@@ -38,7 +38,7 @@
 
 	v12_poe: v12-poe-regulator {
 		compatible = "regulator-fixed";
-		reglator-name = "v12_poe";
+		regulator-name = "v12_poe";
 		regulator-always-on;
 		regulator-boot-on;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 5aec18308712..5310259d03dc 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -37,6 +37,8 @@
 
 &spi_0 {
 	cs-select = <0>;
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	m25p80@0 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d2fe58e0eb7a..3ca198f866c3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -200,7 +200,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 			qcom,config-pipe-trust-reg = <0>;
 		};
 
@@ -221,7 +221,7 @@
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 80>;
+			gpio-ranges = <&tlmm 0 0 80>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
@@ -401,7 +401,7 @@
 			reset-names = "phy",
 				      "common";
 
-			pcie_phy0: lane@84200 {
+			pcie_phy0: phy@84200 {
 				reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
 				      <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
 				      <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
@@ -433,10 +433,8 @@
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0 0x20200000
-				  0 0x10000>, /* downstream I/O */
-				 <0x82000000 0 0x20220000 0 0x20220000
-				  0 0xfde0000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index cc08dc4eb56a..68698cdf56c4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -60,11 +60,11 @@
 	perst-gpio = <&tlmm 58 0x1>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index db333001df4d..17eeff106bab 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -13,7 +13,7 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
 
@@ -106,7 +106,7 @@
 			reset-names = "phy","common";
 			status = "disabled";
 
-			usb1_ssphy: lane@58200 {
+			usb1_ssphy: phy@58200 {
 				reg = <0x00058200 0x130>,       /* Tx */
 				      <0x00058400 0x200>,     /* Rx */
 				      <0x00058800 0x1f8>,     /* PCS  */
@@ -114,7 +114,7 @@
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB1_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb1_pipe_clk_src";
+				clock-output-names = "usb3phy_1_cc_pipe_clk";
 			};
 		};
 
@@ -149,7 +149,7 @@
 			reset-names = "phy","common";
 			status = "disabled";
 
-			usb0_ssphy: lane@78200 {
+			usb0_ssphy: phy@78200 {
 				reg = <0x00078200 0x130>,       /* Tx */
 				      <0x00078400 0x200>,     /* Rx */
 				      <0x00078800 0x1f8>,     /* PCS  */
@@ -157,7 +157,7 @@
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
+				clock-output-names = "usb3phy_0_cc_pipe_clk";
 			};
 		};
 
@@ -174,34 +174,61 @@
 			status = "disabled";
 		};
 
-		pcie_phy0: phy@86000 {
-			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x00086000 0x1000>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-			clock-names = "pipe_clk";
-			clock-output-names = "pcie20_phy0_pipe_clk";
+		pcie_qmp0: phy@84000 {
+			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+			reg = <0x00084000 0x1bc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				<&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
 				<&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 			status = "disabled";
+
+			pcie_phy0: phy@84200 {
+				reg = <0x84200 0x16c>,
+				      <0x84400 0x200>,
+				      <0x84800 0x1f0>,
+				      <0x84c00 0xf4>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie20_phy0_pipe_clk";
+			};
 		};
 
-		pcie_phy1: phy@8e000 {
+		pcie_qmp1: phy@8e000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x0008e000 0x1000>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
-			clock-names = "pipe_clk";
-			clock-output-names = "pcie20_phy1_pipe_clk";
+			reg = <0x0008e000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				<&gcc GCC_PCIE1_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
 			resets = <&gcc GCC_PCIE1_PHY_BCR>,
 				<&gcc GCC_PCIE1PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 			status = "disabled";
+
+			pcie_phy1: phy@8e200 {
+				reg = <0x8e200 0x130>,
+				      <0x8e400 0x200>,
+				      <0x8e800 0x1f8>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie20_phy1_pipe_clk";
+			};
 		};
 
 		prng: rng@e3000 {
@@ -220,7 +247,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 			status = "disabled";
 		};
 
@@ -437,7 +464,7 @@
 			status = "disabled";
 		};
 
-		qpic_nand: nand@79b0000 {
+		qpic_nand: nand-controller@79b0000 {
 			compatible = "qcom,ipq8074-nand";
 			reg = <0x079b0000 0x10000>;
 			#address-cells = <1>;
@@ -634,10 +661,8 @@
 			phys = <&pcie_phy1>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x10200000 0x10200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x10300000 0x10300000
-				  0 0xd00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
 
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -680,26 +705,26 @@
 		};
 
 		pcie0: pci@20000000 {
-			compatible = "qcom,pcie-ipq8074";
+			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
-			      <0x00080000 0x2000>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x4000>,
 			      <0x20100000 0x1000>;
-			reg-names = "dbi", "elbi", "parf", "config";
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
+			max-link-speed = <3>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0x20200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x20300000 0x20300000
-				  0 0xd00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -717,28 +742,30 @@
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
-				 <&gcc GCC_PCIE0_AHB_CLK>,
-				 <&gcc GCC_PCIE0_AUX_CLK>;
-
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>;
 			clock-names = "iface",
 				      "axi_m",
 				      "axi_s",
-				      "ahb",
-				      "aux";
+				      "axi_bridge",
+				      "rchng";
+
 			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
 				 <&gcc GCC_PCIE0_SLEEP_ARES>,
 				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
 				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
 				 <&gcc GCC_PCIE0_AHB_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
 			reset-names = "pipe",
 				      "sleep",
 				      "sticky",
 				      "axi_m",
 				      "axi_s",
 				      "ahb",
-				      "axi_m_sticky";
+				      "axi_m_sticky",
+				      "axi_s_sticky";
 			status = "disabled";
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
index d66c15538785..7c0ceb3cff45 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -5,9 +5,22 @@
 
 /dts-v1/;
 
-#include "msm8916-mtp.dtsi"
+#include "msm8916-pm8916.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
 	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		usid0 = &pm8916_0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
deleted file mode 100644
index 1bd05046cdeb..000000000000
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- */
-
-#include "msm8916-pm8916.dtsi"
-
-/ {
-	aliases {
-		serial0 = &blsp1_uart2;
-		usid0 = &pm8916_0;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 3f85e34a8ce6..fcc9f757c9e1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -19,8 +19,8 @@
 	#size-cells = <2>;
 
 	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 	};
 
 	chosen { };
@@ -445,7 +445,7 @@
 			};
 		};
 
-		rpm_msg_ram: memory@60000 {
+		rpm_msg_ram: sram@60000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x00060000 0x8000>;
 		};
@@ -1064,7 +1064,7 @@
 			};
 		};
 
-		camss: camss@1b00000 {
+		camss: camss@1b0ac00 {
 			compatible = "qcom,msm8916-camss";
 			reg = <0x01b0ac00 0x200>,
 				<0x01b00030 0x4>,
@@ -1307,7 +1307,7 @@
 		};
 
 		mpss: remoteproc@4080000 {
-			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
 
@@ -1384,11 +1384,17 @@
 		lpass: audio-controller@7708000 {
 			status = "disabled";
 			compatible = "qcom,lpass-cpu-apq8016";
+
+			/*
+			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
+			 * is actually only used by Tertiary MI2S while
+			 * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+			 */
 			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
 				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
 				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
 				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
 				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
 				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
 
@@ -1741,8 +1747,8 @@
 					<&rpmpd MSM8916_VDDMX>;
 			power-domain-names = "cx", "mx";
 
-			qcom,state = <&wcnss_smp2p_out 0>;
-			qcom,state-names = "stop";
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&wcnss_pin_a>;
@@ -1765,7 +1771,7 @@
 
 				label = "pronto";
 
-				wcnss {
+				wcnss_ctrl: wcnss {
 					compatible = "qcom,wcnss";
 					qcom,smd-channels = "WCNSS_CTRL";
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 1ccca83292ac..60fcb024c887 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
  */
 
 /dts-v1/;
@@ -13,6 +14,9 @@
 /* cont_splash_mem has different memory mapping */
 /delete-node/ &cont_splash_mem;
 
+/* disabled on downstream, conflicts with cont_splash_mem */
+/delete-node/ &dfps_data_mem;
+
 / {
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
@@ -47,7 +51,17 @@
 		};
 
 		cont_splash_mem: memory@3400000 {
-			reg = <0 0x03400000 0 0x1200000>;
+			reg = <0 0x03400000 0 0xc00000>;
+			no-map;
+		};
+
+		reserved@5000000 {
+			reg = <0x0 0x05000000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		reserved@6c00000 {
+			reg = <0x0 0x06c00000 0x0 0x400000>;
 			no-map;
 		};
 	};
@@ -74,7 +88,7 @@
 		vdd_l17_29-supply = <&vph_pwr>;
 		vdd_l20_21-supply = <&vph_pwr>;
 		vdd_l25-supply = <&pm8994_s5>;
-		vdd_lvs1_2 = <&pm8994_s4>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
 
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index 357d55496e75..d08659c606b9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -11,6 +11,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+
 / {
 	model = "Xiaomi Mi 4C";
 	compatible = "xiaomi,libra", "qcom,msm8992";
@@ -60,24 +66,66 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* This is for getting crash logs using Android downstream kernels */
-		ramoops@dfc00000 {
-			compatible = "ramoops";
-			reg = <0x0 0xdfc00000 0x0 0x40000>;
-			console-size = <0x10000>;
-			record-size = <0x10000>;
-			ftrace-size = <0x10000>;
-			pmsg-size = <0x20000>;
+		memory_hole: hole@6400000 {
+			reg = <0 0x06400000 0 0x600000>;
+			no-map;
+		};
+
+		memory_hole2: hole2@6c00000 {
+			reg = <0 0x06c00000 0 0x2400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@9000000 {
+			reg = <0 0x09000000 0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: tzapp@ea00000 {
+			reg = <0 0x0ea00000 0 0x1900000>;
+			no-map;
 		};
 
-		modem_region: modem_region@9000000 {
-			reg = <0x0 0x9000000 0x0 0x5a00000>;
+		mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+			reg = <0 0xca0b0000 0 0x10000>;
 			no-map;
 		};
 
-		tzapp: modem_region@ea00000 {
-			reg = <0x0 0xea00000 0x0 0x1900000>;
+		rmtfs_mem: rmtfs@ca100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xca100000 0 0x180000>;
 			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		audio_mem: audio@cb400000 {
+			reg = <0 0xcb000000 0 0x400000>;
+			no-mem;
+		};
+
+		qseecom_mem: qseecom@cb400000 {
+			reg = <0 0xcb400000 0 0x1c00000>;
+			no-mem;
+		};
+
+		adsp_rfsa_mem: adsp-rfsa@cd000000 {
+			reg = <0 0xcd000000 0 0x10000>;
+			no-map;
+		};
+
+		sensor_rfsa_mem: sensor-rfsa@cd010000 {
+			reg = <0 0xcd010000 0 0x10000>;
+			no-map;
+		};
+
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0 0xdfc00000 0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
 		};
 	};
 };
@@ -120,9 +168,21 @@
 	status = "okay";
 };
 
-&peripheral_region {
-	reg = <0x0 0x7400000 0x0 0x1c00000>;
-	no-map;
+&pm8994_spmi_regulators {
+	VDD_APC0: s8 {
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1180000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */
+	VDD_APC1: s11 {
+		regulator-min-microvolt = <700000>;
+		regulator-max-microvolt = <1225000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &rpm_requests {
@@ -142,7 +202,7 @@
 		vdd_l17_29-supply = <&vph_pwr>;
 		vdd_l20_21-supply = <&vph_pwr>;
 		vdd_l25-supply = <&pm8994_s5>;
-		vdd_lvs1_2 = <&pm8994_s4>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
 
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 58fe58cc7703..765e1f1989b5 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -14,10 +14,6 @@
 	compatible = "qcom,rpmcc-msm8992";
 };
 
-&tcsr_mutex {
-	compatible = "qcom,sfpb-mutex";
-};
-
 &timer {
 	interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 3a3790a52a2c..e2d08915ec42 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -540,8 +540,7 @@
 };
 
 &pmi8994_spmi_regulators {
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 48de66bf19c4..55198190bbea 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -183,8 +183,7 @@
 	 * power domain.. which still isn't enough and forces us to bind
 	 * OXILI_CX and OXILI_GX together!
 	 */
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-name = "VDD_GFX";
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 986fe60dec5f..4447ed146b3a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -93,7 +93,7 @@
 		CPU6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
+			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
 		};
@@ -101,7 +101,7 @@
 		CPU7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
+			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
 		};
@@ -183,8 +183,8 @@
 			no-map;
 		};
 
-		cont_splash_mem: memory@3800000 {
-			reg = <0 0x03800000 0 0x2400000>;
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x2200000>;
 			no-map;
 		};
 
@@ -498,7 +498,7 @@
 			#dma-cells = <1>;
 			qcom,ee = <0>;
 			qcom,controlled-remotely;
-			num-channels = <18>;
+			num-channels = <24>;
 			qcom,num-ees = <4>;
 		};
 
@@ -634,7 +634,7 @@
 			#dma-cells = <1>;
 			qcom,ee = <0>;
 			qcom,controlled-remotely;
-			num-channels = <18>;
+			num-channels = <24>;
 			qcom,num-ees = <4>;
 		};
 
@@ -715,7 +715,7 @@
 			reg = <0xfc400000 0x2000>;
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
@@ -725,7 +725,7 @@
 			reg = <0xfc4ab000 0x4>;
 		};
 
-		spmi_bus: spmi@fc4c0000 {
+		spmi_bus: spmi@fc4cf000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xfc4cf000 0x1000>,
 			      <0xfc4cb000 0x1000>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
index 45ed594c1b9c..7d9fc35bc7a0 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
@@ -5,9 +5,31 @@
 
 /dts-v1/;
 
-#include "msm8996-mtp.dtsi"
+#include "msm8996.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
 	compatible = "qcom,msm8996-mtp";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		serial@75b0000 {
+			status = "okay";
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
deleted file mode 100644
index ac43a91f1104..000000000000
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- */
-
-#include "msm8996.dtsi"
-
-/ {
-	aliases {
-		serial0 = &blsp2_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		serial@75b0000 {
-			status = "okay";
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_phy {
-	status = "okay";
-};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 507396c4d23b..7802abac39fa 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -938,10 +938,6 @@
 	};
 };
 
-/*
- * For reasons that are currently unknown (but probably related to fusb301), USB takes about
- * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
- */
 &usb3 {
 	status = "okay";
 	qcom,select-utmi-as-pipe-clk;
@@ -950,6 +946,7 @@
 &usb3_dwc3 {
 	extcon = <&usb3_id>;
 	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
 	phys = <&hsusb_phy1>;
 	phy-names = "usb2-phy";
 	snps,hird-threshold = /bits/ 8 <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 52df22ab3f6a..ec3ef14048cc 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -142,82 +142,92 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -230,127 +240,137 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0x6>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -598,7 +618,7 @@
 			reset-names = "phy", "common", "cfg";
 			status = "disabled";
 
-			pciephy_0: lane@35000 {
+			pciephy_0: phy@35000 {
 				reg = <0x00035000 0x130>,
 				      <0x00035200 0x200>,
 				      <0x00035400 0x1dc>;
@@ -611,7 +631,7 @@
 				reset-names = "lane0";
 			};
 
-			pciephy_1: lane@36000 {
+			pciephy_1: phy@36000 {
 				reg = <0x00036000 0x130>,
 				      <0x00036200 0x200>,
 				      <0x00036400 0x1dc>;
@@ -624,7 +644,7 @@
 				reset-names = "lane1";
 			};
 
-			pciephy_2: lane@37000 {
+			pciephy_2: phy@37000 {
 				reg = <0x00037000 0x130>,
 				      <0x00037200 0x200>,
 				      <0x00037400 0x1dc>;
@@ -638,7 +658,7 @@
 			};
 		};
 
-		rpm_msg_ram: memory@68000 {
+		rpm_msg_ram: sram@68000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x00068000 0x6000>;
 		};
@@ -965,9 +985,6 @@
 			nvmem-cells = <&speedbin_efuse>;
 			nvmem-cell-names = "speed_bin";
 
-			qcom,gpu-quirk-two-pass-use-wfi;
-			qcom,gpu-quirk-fault-detect-mask;
-
 			operating-points-v2 = <&gpu_opp_table>;
 
 			status = "disabled";
@@ -978,17 +995,17 @@
 				compatible  ="operating-points-v2";
 
 				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
 				 */
 				opp-624000000 {
 					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x09>;
 				};
 				opp-560000000 {
 					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x0d>;
 				};
 				opp-510000000 {
 					opp-hz = /bits/ 64 <510000000>;
@@ -1211,6 +1228,20 @@
 				};
 			};
 
+			blsp1_uart2_default: blsp1-uart2-default {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			blsp1_i2c3_default: blsp1-i2c2-default {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
@@ -1538,8 +1569,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
 
 				device_type = "pci";
 
@@ -1592,8 +1623,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
 
 				device_type = "pci";
 
@@ -1643,8 +1674,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
 
 				device_type = "pci";
 
@@ -1746,7 +1777,7 @@
 			reset-names = "ufsphy";
 			status = "disabled";
 
-			ufsphy_lane: lanes@627400 {
+			ufsphy_lane: phy@627400 {
 				reg = <0x627400 0x12c>,
 				      <0x627600 0x200>,
 				      <0x627c00 0x1b4>;
@@ -1754,7 +1785,7 @@
 			};
 		};
 
-		camss: camss@a00000 {
+		camss: camss@a34000 {
 			compatible = "qcom,msm8996-camss";
 			reg = <0x00a34000 0x1000>,
 			      <0x00a00030 0x4>,
@@ -2578,8 +2609,11 @@
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,is-utmi-l1-suspend;
+				tx-fifo-resize;
 			};
 		};
 
@@ -2601,7 +2635,7 @@
 			reset-names = "phy", "common";
 			status = "disabled";
 
-			ssusb_phy_0: lane@7410200 {
+			ssusb_phy_0: phy@7410200 {
 				reg = <0x07410200 0x200>,
 				      <0x07410400 0x130>,
 				      <0x07410600 0x1a8>;
@@ -2704,6 +2738,9 @@
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
 			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
 			dma-names = "tx", "rx";
 			status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 000000000000..63e1b4ec7a36
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 34039b5c8017..b7d72b0d579e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -308,38 +308,42 @@
 			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-retention";
+				/* CPU Retention (C2D), L2 Active */
 				arm,psci-suspend-param = <0x00000002>;
 				entry-latency-us = <81>;
 				exit-latency-us = <86>;
-				min-residency-us = <200>;
+				min-residency-us = <504>;
 			};
 
 			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
 				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <273>;
-				exit-latency-us = <612>;
-				min-residency-us = <1000>;
+				entry-latency-us = <814>;
+				exit-latency-us = <4562>;
+				min-residency-us = <9183>;
 				local-timer-stop;
 			};
 
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-retention";
+				/* CPU Retention (C2D), L2 Active */
 				arm,psci-suspend-param = <0x00000002>;
 				entry-latency-us = <79>;
 				exit-latency-us = <82>;
-				min-residency-us = <200>;
+				min-residency-us = <1302>;
 			};
 
 			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
 				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <336>;
-				exit-latency-us = <525>;
-				min-residency-us = <1000>;
+				entry-latency-us = <724>;
+				exit-latency-us = <2027>;
+				min-residency-us = <9419>;
 				local-timer-stop;
 			};
 		};
@@ -857,7 +861,7 @@
 			reg = <0x00100000 0xb0000>;
 		};
 
-		rpm_msg_ram: memory@778000 {
+		rpm_msg_ram: sram@778000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x00778000 0x7000>;
 		};
@@ -947,7 +951,7 @@
 			phy-names = "pciephy";
 			status = "disabled";
 
-			ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
 
 			#interrupt-cells = <1>;
@@ -990,7 +994,7 @@
 			vdda-phy-supply = <&vreg_l1a_0p875>;
 			vdda-pll-supply = <&vreg_l2a_1p2>;
 
-			pciephy: lane@1c06800 {
+			pciephy: phy@1c06800 {
 				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
 				#phy-cells = <0>;
 
@@ -1062,7 +1066,7 @@
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: lanes@1da7400 {
+			ufsphy_lanes: phy@1da7400 {
 				reg = <0x01da7400 0x128>,
 				      <0x01da7600 0x1fc>,
 				      <0x01da7c00 0x1dc>,
@@ -1469,7 +1473,7 @@
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
 			      <0x16280000 0x180000>;
-			reg-names = "stm-base", "stm-data-base";
+			reg-names = "stm-base", "stm-stimulus-base";
 			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
@@ -1995,7 +1999,7 @@
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
 			reset-names = "phy", "common";
 
-			usb1_ssphy: lane@c010200 {
+			usb1_ssphy: phy@c010200 {
 				reg = <0xc010200 0x128>,
 				      <0xc010400 0x200>,
 				      <0xc010c00 0x20c>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
index e847d7209afc..affc736d154a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -152,7 +152,7 @@
 				qcom,pre-scaling = <1 3>;
 			};
 
-			vcoin: vcoin@83 {
+			vcoin: vcoin@85 {
 				reg = <ADC5_VCOIN>;
 				qcom,decimation = <1024>;
 				qcom,pre-scaling = <1 3>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi
index f931cb0de231..42180f1b5dbb 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -86,7 +86,6 @@
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>;
-			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index b4ac900ab115..a06ea9adae81 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -42,7 +42,7 @@
 			/* Yes, all four strings *have to* be defined or things won't work. */
 			qcom,enabled-strings = <0 1 2 3>;
 			qcom,cabc;
-			qcom,eternal-pfet;
+			qcom,external-pfet;
 			status = "disabled";
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 04fc2632a0b2..fc38f77d12a3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -16,8 +16,9 @@
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 339790ba585d..fd0d634a373f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -318,7 +318,7 @@
 			status = "disabled";
 		};
 
-		rpm_msg_ram: memory@60000 {
+		rpm_msg_ram: sram@60000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x00060000 0x6000>;
 		};
@@ -548,7 +548,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x07580000 0xcd00>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy_sec>, <&usb3_phy>;
+				phys = <&usb2_phy_prim>, <&usb3_phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -577,7 +577,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x078c0000 0xcc00>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy_prim>;
+				phys = <&usb2_phy_sec>;
 				phy-names = "usb2-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -775,7 +775,7 @@
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
-				 <&gcc 21>;
+				 <&gcc GCC_PCIE_0_PIPE_ARES>;
 			reset-names = "phy", "pipe";
 
 			clock-output-names = "pcie_0_pipe_clk";
@@ -1305,12 +1305,12 @@
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
 			clock-names = "iface", "aux", "master_bus", "slave_bus";
 
-			resets = <&gcc 18>,
-				 <&gcc 17>,
-				 <&gcc 15>,
-				 <&gcc 19>,
+			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE_0_BCR>,
-				 <&gcc 16>;
+				 <&gcc GCC_PCIE_0_AHB_ARES>;
 			reset-names = "axi_m",
 				      "axi_s",
 				      "axi_m_sticky",
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 69460571d6e0..f69ff7911635 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -27,7 +27,7 @@
 	};
 
 	/* Fixed crystal oscillator dedicated to MCP2518FD */
-	clk40M: can_clock {
+	clk40M: can-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <40000000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 5ae2ddc65f7e..56a789a5789e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -43,7 +43,6 @@
 
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-allow-set-load;
 
 		vin-supply = <&vreg_3p3>;
 	};
@@ -114,6 +113,9 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a_1p8: ldo7 {
@@ -129,6 +131,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a_0p8: ldo11 {
@@ -235,6 +240,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_1p8: ldo7 {
@@ -250,6 +258,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
index d8ed1d7b4ec7..4b306a59d9be 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
@@ -16,3 +16,11 @@
 &cpu6_opp12 {
 	opp-peak-kBps = <8532000 23347200>;
 };
+
+&cpu6_opp13 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp14 {
+	opp-peak-kBps = <8532000 23347200>;
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index a758e4d22612..81098aa9687b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -33,7 +33,7 @@ ap_h1_spi: &spi0 {};
 			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
-			sustainable-power = <814>;
+			sustainable-power = <965>;
 
 			trips {
 				skin_temp_alert0: trip-point0 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
index 6ebde0828550..8a98a6f849c4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -26,7 +26,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
 
-		vcc-supply = <&pp3300_fp_tp>;
+		vdd-supply = <&pp3300_fp_tp>;
 		hid-descr-addr = <0x20>;
 
 		wakeup-source;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index a246dbd74cc1..b7b5264888b7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -44,7 +44,7 @@ ap_h1_spi: &spi0 {};
 };
 
 &cpu6_thermal {
-	sustainable-power = <948>;
+	sustainable-power = <1124>;
 };
 
 &cpu7_alert0 {
@@ -56,7 +56,7 @@ ap_h1_spi: &spi0 {};
 };
 
 &cpu7_thermal {
-	sustainable-power = <948>;
+	sustainable-power = <1124>;
 };
 
 &cpu8_alert0 {
@@ -68,7 +68,7 @@ ap_h1_spi: &spi0 {};
 };
 
 &cpu8_thermal {
-	sustainable-power = <948>;
+	sustainable-power = <1124>;
 };
 
 &cpu9_alert0 {
@@ -80,7 +80,7 @@ ap_h1_spi: &spi0 {};
 };
 
 &cpu9_thermal {
-	sustainable-power = <948>;
+	sustainable-power = <1124>;
 };
 
 &gpio_keys {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index c50a74872c0b..5b40503af01e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -42,6 +42,7 @@
  */
 
 /delete-node/ &hyp_mem;
+/delete-node/ &ipa_fw_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &aop_mem;
 /delete-node/ &sec_apps_mem;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index c8921e2d6480..12816d60e249 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -137,8 +137,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
@@ -162,8 +162,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
 			next-level-cache = <&L2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -184,8 +184,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
 			next-level-cache = <&L2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -206,8 +206,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
 			next-level-cache = <&L2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -228,8 +228,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
 			next-level-cache = <&L2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -250,8 +250,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
 			next-level-cache = <&L2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -272,8 +272,8 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1740>;
-			dynamic-power-coefficient = <405>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <480>;
 			next-level-cache = <&L2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -294,8 +294,8 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <1740>;
-			dynamic-power-coefficient = <405>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <480>;
 			next-level-cache = <&L2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -1460,6 +1460,8 @@
 					     "imem",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
@@ -3239,8 +3241,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 			cell-index = <0>;
@@ -3616,7 +3618,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
-			sustainable-power = <768>;
+			sustainable-power = <1052>;
 
 			trips {
 				cpu0_alert0: trip-point0 {
@@ -3665,7 +3667,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
-			sustainable-power = <768>;
+			sustainable-power = <1052>;
 
 			trips {
 				cpu1_alert0: trip-point0 {
@@ -3714,7 +3716,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
-			sustainable-power = <768>;
+			sustainable-power = <1052>;
 
 			trips {
 				cpu2_alert0: trip-point0 {
@@ -3763,7 +3765,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
-			sustainable-power = <768>;
+			sustainable-power = <1052>;
 
 			trips {
 				cpu3_alert0: trip-point0 {
@@ -3812,7 +3814,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
-			sustainable-power = <768>;
+			sustainable-power = <1052>;
 
 			trips {
 				cpu4_alert0: trip-point0 {
@@ -3861,7 +3863,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
-			sustainable-power = <768>;
+			sustainable-power = <1052>;
 
 			trips {
 				cpu5_alert0: trip-point0 {
@@ -3910,7 +3912,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
-			sustainable-power = <1202>;
+			sustainable-power = <1425>;
 
 			trips {
 				cpu6_alert0: trip-point0 {
@@ -3951,7 +3953,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
-			sustainable-power = <1202>;
+			sustainable-power = <1425>;
 
 			trips {
 				cpu7_alert0: trip-point0 {
@@ -3992,7 +3994,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
-			sustainable-power = <1202>;
+			sustainable-power = <1425>;
 
 			trips {
 				cpu8_alert0: trip-point0 {
@@ -4033,7 +4035,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
-			sustainable-power = <1202>;
+			sustainable-power = <1425>;
 
 			trips {
 				cpu9_alert0: trip-point0 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index fd78f16181dd..fb6473a0aa4b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -429,7 +429,7 @@
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <0>, <0>, <0>, <0>, <0>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
-				      "pcie_0_pipe_clk", "pcie_1_pipe-clk",
+				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
 				      "ufs_phy_tx_symbol_0_clk",
 				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
@@ -615,6 +615,8 @@
 			interconnect-names = "memory",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
@@ -1258,15 +1260,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
@@ -1496,8 +1494,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 9c7f87e42fcc..e00c0577cef7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
 #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -541,7 +542,7 @@
 					<&sleep_clk>;
 		};
 
-		rpm_msg_ram: memory@778000 {
+		rpm_msg_ram: sram@778000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x00778000 0x7000>;
 		};
@@ -767,7 +768,7 @@
 					pins = "gpio17", "gpio18", "gpio19";
 					function = "gpio";
 					drive-strength = <2>;
-					bias-no-pull;
+					bias-disable;
 				};
 			};
 
@@ -1041,11 +1042,13 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
-			interconnects = <&gnoc 1 &bimc 5>;
+			interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
 			interconnect-names = "gfx-mem";
 
 			operating-points-v2 = <&gpu_sdm630_opp_table>;
 
+			status = "disabled";
+
 			gpu_sdm630_opp_table: opp-table {
 				compatible  = "operating-points-v2";
 				opp-775000000 {
@@ -1251,7 +1254,7 @@
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
+				 <&gcc GCC_RX0_USB2_CLKREF_CLK>;
 			clock-names = "cfg_ahb", "ref";
 
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
@@ -1831,7 +1834,7 @@
 			};
 		};
 
-		camss: camss@ca00000 {
+		camss: camss@ca00020 {
 			compatible = "qcom,sdm660-camss";
 			reg = <0x0c824000 0x1000>,
 			      <0x0ca00120 0x4>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
index bba1c2bce213..0afe9eee025e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -18,7 +18,7 @@
 };
 
 &sdc2_state_on {
-	pinconf-clk {
+	clk {
 		drive-strength = <14>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index dfd1b42c07fd..3566db1d7357 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1299,7 +1299,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-low;
 		};
@@ -1309,7 +1309,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-high;
 		};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c1fdfaf98096..93a1363e886d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -896,7 +896,7 @@
 	};
 
 	wcd_intr_default: wcd_intr_default {
-		pins = <54>;
+		pins = "gpio54";
 		function = "gpio";
 
 		input-enable;
@@ -1045,7 +1045,10 @@
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi2_default {
-	drive-strength = <16>;
+	pinconf {
+		pins = "gpio27", "gpio28", "gpio29", "gpio30";
+		drive-strength = <16>;
+	};
 };
 
 &qup_uart3_default{
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 7f04b0168a5c..41f58e3ba0cf 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -221,7 +221,7 @@
 	panel@0 {
 		compatible = "tianma,fhd-video";
 		reg = <0>;
-		vddi0-supply = <&vreg_l14a_1p8>;
+		vddio-supply = <&vreg_l14a_1p8>;
 		vddpos-supply = <&lab>;
 		vddneg-supply = <&ibb>;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b3b911926184..a0489a45aafb 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -196,8 +196,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <607>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -221,8 +221,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <607>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -243,8 +243,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <607>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -265,8 +265,8 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			capacity-dmips-mhz = <607>;
-			dynamic-power-coefficient = <100>;
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -288,7 +288,7 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			dynamic-power-coefficient = <396>;
+			dynamic-power-coefficient = <442>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -310,7 +310,7 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			dynamic-power-coefficient = <396>;
+			dynamic-power-coefficient = <442>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -332,7 +332,7 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			dynamic-power-coefficient = <396>;
+			dynamic-power-coefficient = <442>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -354,7 +354,7 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
-			dynamic-power-coefficient = <396>;
+			dynamic-power-coefficient = <442>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -1988,8 +1988,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -2064,7 +2064,7 @@
 
 			status = "disabled";
 
-			pcie0_lane: lanes@1c06200 {
+			pcie0_lane: phy@1c06200 {
 				reg = <0 0x01c06200 0 0x128>,
 				      <0 0x01c06400 0 0x1fc>,
 				      <0 0x01c06800 0 0x218>,
@@ -2093,7 +2093,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
@@ -2174,7 +2174,7 @@
 
 			status = "disabled";
 
-			pcie1_lane: lanes@1c06200 {
+			pcie1_lane: phy@1c06200 {
 				reg = <0 0x01c0a800 0 0x800>,
 				      <0 0x01c0a800 0 0x800>,
 				      <0 0x01c0b800 0 0x400>;
@@ -2302,7 +2302,7 @@
 			reset-names = "ufsphy";
 			status = "disabled";
 
-			ufs_mem_phy_lanes: lanes@1d87400 {
+			ufs_mem_phy_lanes: phy@1d87400 {
 				reg = <0 0x01d87400 0 0x108>,
 				      <0 0x01d87600 0 0x1e0>,
 				      <0 0x01d87c00 0 0x1dc>,
@@ -2316,11 +2316,11 @@
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rpmhcc 15>;
+			clocks = <&rpmhcc RPMH_CE_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x704 0x1>,
 				 <&apps_smmu 0x706 0x1>,
 				 <&apps_smmu 0x714 0x1>,
@@ -2331,8 +2331,8 @@
 			compatible = "qcom,crypto-v5.4";
 			reg = <0 0x01dfa000 0 0x6000>;
 			clocks = <&gcc GCC_CE1_AHB_CLK>,
-				 <&gcc GCC_CE1_AHB_CLK>,
-				 <&rpmhcc 15>;
+				 <&gcc GCC_CE1_AXI_CLK>,
+				 <&rpmhcc RPMH_CE_CLK>;
 			clock-names = "iface", "bus", "core";
 			dmas = <&cryptobam 6>, <&cryptobam 7>;
 			dma-names = "rx", "tx";
@@ -3608,10 +3608,10 @@
 					#clock-cells = <0>;
 					clock-frequency = <9600000>;
 					clock-output-names = "mclk";
-					qcom,micbias1-millivolt = <1800>;
-					qcom,micbias2-millivolt = <1800>;
-					qcom,micbias3-millivolt = <1800>;
-					qcom,micbias4-millivolt = <1800>;
+					qcom,micbias1-microvolt = <1800000>;
+					qcom,micbias2-microvolt = <1800000>;
+					qcom,micbias3-microvolt = <1800000>;
+					qcom,micbias4-microvolt = <1800000>;
 
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -3699,7 +3699,7 @@
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: lanes@88e9200 {
+			usb_1_ssphy: phy@88e9200 {
 				reg = <0 0x088e9200 0 0x128>,
 				      <0 0x088e9400 0 0x200>,
 				      <0 0x088e9c00 0 0x218>,
@@ -3732,7 +3732,7 @@
 				 <&gcc GCC_USB3_PHY_SEC_BCR>;
 			reset-names = "phy", "common";
 
-			usb_2_ssphy: lane@88eb200 {
+			usb_2_ssphy: phy@88eb200 {
 				reg = <0 0x088eb200 0 0x128>,
 				      <0 0x088eb400 0 0x1fc>,
 				      <0 0x088eb800 0 0x218>,
@@ -3921,7 +3921,7 @@
 			#reset-cells = <1>;
 		};
 
-		camss: camss@a00000 {
+		camss: camss@acb3000 {
 			compatible = "qcom,sdm845-camss";
 
 			reg = <0 0xacb3000 0 0x1000>,
@@ -4147,7 +4147,7 @@
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			clocks = <&gcc GCC_DISP_AHB_CLK>,
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 47452ab0d514..a51060e8c43b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -475,8 +475,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
@@ -518,6 +520,10 @@
 	dai@1 {
 		reg = <1>;
 	};
+
+	dai@2 {
+		reg = <2>;
+	};
 };
 
 &sound {
@@ -530,6 +536,7 @@
 		"SpkrLeft IN", "SPK1 OUT",
 		"SpkrRight IN", "SPK2 OUT",
 		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
 		"MultiMedia2 Capture", "MM_UL2";
 
 	mm1-dai-link {
@@ -546,6 +553,13 @@
 		};
 	};
 
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
 	slim-dai-link {
 		link-name = "SLIM Playback";
 		cpu {
@@ -575,6 +589,21 @@
 			sound-dai = <&wcd9340 1>;
 		};
 	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&wcd9340 2>;
+		};
+	};
 };
 
 &tlmm {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 58b6b2742d3f..47f8e5397ebb 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -88,11 +88,19 @@
 	status = "okay";
 };
 
-&sdc2_state_off {
+&sdc2_off_state {
 	sd-cd {
 		pins = "gpio98";
+		drive-strength = <2>;
 		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd {
+		pins = "gpio98";
 		drive-strength = <2>;
+		bias-pull-up;
 	};
 };
 
@@ -102,32 +110,6 @@
 
 &tlmm {
 	gpio-reserved-ranges = <22 2>, <28 6>;
-
-	sdc2_state_on: sdc2-on {
-		clk {
-			pins = "sdc2_clk";
-			bias-disable;
-			drive-strength = <16>;
-		};
-
-		cmd {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		sd-cd {
-			pins = "gpio98";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-	};
 };
 
 &usb3 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 2b37ce6a9f9c..2e4fe2bc1e0a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -336,23 +336,43 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			sdc2_state_off: sdc2-off {
+			sdc2_off_state: sdc2-off-state {
 				clk {
 					pins = "sdc2_clk";
-					bias-disable;
 					drive-strength = <2>;
+					bias-disable;
 				};
 
 				cmd {
 					pins = "sdc2_cmd";
+					drive-strength = <2>;
 					bias-pull-up;
+				};
+
+				data {
+					pins = "sdc2_data";
 					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
 				};
 
 				data {
 					pins = "sdc2_data";
+					drive-strength = <10>;
 					bias-pull-up;
-					drive-strength = <2>;
 				};
 			};
 		};
@@ -372,15 +392,15 @@
 			reg = <0x01613000 0x180>;
 			#phy-cells = <0>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&gcc GCC_AHB2PHY_USB_CLK>;
-			clock-names = "ref", "cfg_ahb";
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
 
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 			status = "disabled";
 		};
 
-		rpm_msg_ram: memory@45f0000 {
+		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x045f0000 0x7000>;
 		};
@@ -388,7 +408,7 @@
 		sdhc_1: sdhci@4744000 {
 			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
-			reg-names = "hc", "core";
+			reg-names = "hc", "cqhci";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,8 +437,8 @@
 				<&xo_board>;
 			clock-names = "iface", "core", "xo";
 
-			pinctrl-0 = <&sdc2_state_on>;
-			pinctrl-1 = <&sdc2_state_off>;
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
 			pinctrl-names = "default", "sleep";
 
 			bus-width = <4>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index 014fe3a31548..04c71f74ab72 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -33,9 +33,10 @@
 		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x9c000000 0 0x2300000>;
-			width = <1644>;
-			height = <3840>;
-			stride = <(1644 * 4)>;
+			/* Griffin BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
 			format = "a8r8g8b8";
 			/*
 			 * That's (going to be) a lot of clocks, but it's necessary due
@@ -348,6 +349,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
@@ -367,6 +371,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ef0232c2cf45..292e40d6162d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1692,12 +1692,12 @@
 			reset-names = "ufsphy";
 			status = "disabled";
 
-			ufs_mem_phy_lanes: lanes@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -3010,7 +3010,7 @@
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: lanes@88e9200 {
+			usb_1_ssphy: phy@88e9200 {
 				reg = <0 0x088e9200 0 0x200>,
 				      <0 0x088e9400 0 0x200>,
 				      <0 0x088e9c00 0 0x218>,
@@ -3043,7 +3043,7 @@
 				 <&gcc GCC_USB3_PHY_SEC_BCR>;
 			reset-names = "phy", "common";
 
-			usb_2_ssphy: lane@88eb200 {
+			usb_2_ssphy: phy@88eb200 {
 				reg = <0 0x088eb200 0 0x200>,
 				      <0 0x088eb400 0 0x200>,
 				      <0 0x088eb800 0 0x800>,
@@ -3434,9 +3434,9 @@
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>,
-					  <SLEEP_TCS   1>,
-					  <WAKE_TCS    1>,
-					  <CONTROL_TCS 0>;
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index d63f7a9bc4e9..b093f2a02a9c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -26,9 +26,10 @@
 		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x9c000000 0 0x2300000>;
-			width = <1644>;
-			height = <3840>;
-			stride = <(1644 * 4)>;
+			/* pdx203 BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
 			format = "a8r8g8b8";
 			/*
 			 * That's a lot of clocks, but it's necessary due
@@ -317,6 +318,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_2p85: ldo7 {
@@ -339,6 +343,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {
@@ -585,7 +592,7 @@
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
-		bias-disabled;
+		bias-disable;
 		input-enable;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d12e4cbfc852..181e32b8a272 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1393,8 +1393,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1434,8 +1434,8 @@
 			phys = <&pcie0_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
@@ -1463,7 +1463,7 @@
 
 			status = "disabled";
 
-			pcie0_lane: lanes@1c06200 {
+			pcie0_lane: phy@1c06200 {
 				reg = <0 0x1c06200 0 0x170>, /* tx */
 				      <0 0x1c06400 0 0x200>, /* rx */
 				      <0 0x1c06800 0 0x1f0>, /* pcs */
@@ -1472,6 +1472,8 @@
 				clock-names = "pipe0";
 
 				#phy-cells = <0>;
+
+				#clock-cells = <0>;
 				clock-output-names = "pcie_0_pipe_clk";
 			};
 		};
@@ -1492,10 +1494,10 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
@@ -1538,8 +1540,8 @@
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
@@ -1567,7 +1569,7 @@
 
 			status = "disabled";
 
-			pcie1_lane: lanes@1c0e200 {
+			pcie1_lane: phy@1c0e200 {
 				reg = <0 0x1c0e200 0 0x170>, /* tx0 */
 				      <0 0x1c0e400 0 0x200>, /* rx0 */
 				      <0 0x1c0ea00 0 0x1f0>, /* pcs */
@@ -1578,6 +1580,8 @@
 				clock-names = "pipe0";
 
 				#phy-cells = <0>;
+
+				#clock-cells = <0>;
 				clock-output-names = "pcie_1_pipe_clk";
 			};
 		};
@@ -1598,10 +1602,10 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
@@ -1644,8 +1648,8 @@
 			phys = <&pcie2_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie2_default_state>;
@@ -1673,7 +1677,7 @@
 
 			status = "disabled";
 
-			pcie2_lane: lanes@1c16200 {
+			pcie2_lane: phy@1c16200 {
 				reg = <0 0x1c16200 0 0x170>, /* tx0 */
 				      <0 0x1c16400 0 0x200>, /* rx0 */
 				      <0 0x1c16a00 0 0x1f0>, /* pcs */
@@ -1684,6 +1688,8 @@
 				clock-names = "pipe0";
 
 				#phy-cells = <0>;
+
+				#clock-cells = <0>;
 				clock-output-names = "pcie_2_pipe_clk";
 			};
 		};
@@ -1750,12 +1756,12 @@
 			reset-names = "ufsphy";
 			status = "disabled";
 
-			ufs_mem_phy_lanes: lanes@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -1927,7 +1933,7 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <2>;
-					pull-down;
+					bias-pull-down;
 					input-enable;
 				};
 			};
@@ -2300,15 +2306,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
@@ -2330,7 +2332,7 @@
 				 <&gcc GCC_USB3_PHY_SEC_BCR>;
 			reset-names = "phy", "common";
 
-			usb_2_ssphy: lanes@88eb200 {
+			usb_2_ssphy: phy@88eb200 {
 				reg = <0 0x088eb200 0 0x200>,
 				      <0 0x088eb400 0 0x200>,
 				      <0 0x088eb800 0 0x800>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8350-hdk.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 4667f25477d2..79741a207841 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -108,6 +108,9 @@
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
@@ -116,6 +119,9 @@
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p96: ldo7 {
@@ -124,6 +130,9 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
@@ -132,6 +141,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e91cd8a5e535..1ef16975d13a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -35,6 +35,24 @@
 			clock-frequency = <32000>;
 			#clock-cells = <0>;
 		};
+
+		ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
+
+		ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
+
+		ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -443,8 +461,30 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "ufs_card_rx_symbol_0_clk",
+				      "ufs_card_rx_symbol_1_clk",
+				      "ufs_card_tx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk",
+				      "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&ufs_phy_rx_symbol_0_clk>,
+				 <&ufs_phy_rx_symbol_1_clk>,
+				 <&ufs_phy_tx_symbol_0_clk>,
+				 <0>,
+				 <0>;
 		};
 
 		ipcc: mailbox@408000 {
@@ -696,6 +736,8 @@
 			interconnect-names = "memory",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
@@ -939,7 +981,7 @@
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8350-rpmh-clk";
@@ -1060,14 +1102,14 @@
 				<75000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<75000000 300000000>,
-				<75000000 300000000>;
+				<0 0>,
+				<0 0>;
 			status = "disabled";
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0xe10>;
+			reg = <0 0x01d87000 0 0x1c4>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			#clock-cells = <1>;
@@ -1081,12 +1123,12 @@
 			reset-names = "ufsphy";
 			status = "disabled";
 
-			ufs_mem_phy_lanes: lanes@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 			};
@@ -2185,7 +2227,7 @@
 			};
 		};
 
-		camera-thermal-bottom {
+		cam-thermal-bottom {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 2692cc64bff6..f1ab4943c295 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -146,7 +146,7 @@
 		};
 	};
 
-	reg_audio: regulator_audio {
+	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "audio-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -174,7 +174,7 @@
 		vin-supply = <&reg_lcd>;
 	};
 
-	reg_cam0: regulator_camera {
+	reg_cam0: regulator-cam0 {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_cam0";
 		regulator-min-microvolt = <1800000>;
@@ -183,7 +183,7 @@
 		enable-active-high;
 	};
 
-	reg_cam1: regulator_camera {
+	reg_cam1: regulator-cam1 {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_cam1";
 		regulator-min-microvolt = <1800000>;
@@ -432,20 +432,6 @@
 		};
 	};
 
-	/* 0 - lcd_reset */
-	/* 1 - lcd_pwr */
-	/* 2 - lcd_select */
-	/* 3 - backlight-enable */
-	/* 4 - Touch_shdwn */
-	/* 5 - LCD_H_pol */
-	/* 6 - lcd_V_pol */
-	gpio_exp1: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	touchscreen@26 {
 		compatible = "ilitek,ili2117";
 		reg = <0x26>;
@@ -477,6 +463,16 @@
 			};
 		};
 	};
+
+	gpio_exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+				  "backlight-enable", "Touch_shdwn",
+				  "LCD_H_pol", "lcd_V_pol";
+	};
 };
 
 &lvds0 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 090dc9c4f57b..937d17a426b6 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -50,6 +50,7 @@
 &avb {
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&phy0>;
 	rx-internal-delay-ps = <1800>;
 	tx-internal-delay-ps = <2000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c..20f8adc635e7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -18,6 +18,7 @@
 	pinctrl-names = "default";
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774a1.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 6f4fffacfca2..e70aa5a08740 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2784,7 +2784,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774b1.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 0f7bdfc90a0d..6c5694fa6690 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2629,7 +2629,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2644,7 +2644,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2659,7 +2659,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index d597772c4c37..50189209b660 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -49,17 +49,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
@@ -1953,7 +1950,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
-			thermal-sensors = <&thermal 0>;
+			thermal-sensors = <&thermal>;
 			sustainable-power = <717>;
 
 			cooling-maps {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774e1.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 379a1300272b..62209ab6deb9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -2904,7 +2904,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2919,7 +2919,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2934,7 +2934,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77951.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 1768a3e6bb8d..193d81be40fc 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3375,7 +3375,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -3390,7 +3390,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -3405,7 +3405,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77960.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 2bd8169735d3..b526e4f0ee6a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -2972,7 +2972,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2987,7 +2987,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -3002,7 +3002,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77961.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 041473aa5cd0..21fc95397c3c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -2719,7 +2719,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2734,7 +2734,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2749,7 +2749,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77965.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 08df75606430..f9679a4dd85f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2784,7 +2784,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2799,7 +2799,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2814,7 +2814,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 6347d15e66b6..21fe602bd25a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1580,7 +1580,7 @@
 	};
 
 	thermal-zones {
-		thermal-sensor-1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -1599,7 +1599,7 @@
 			};
 		};
 
-		thermal-sensor-2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 0ea300a8147d..adcb03fa2314 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -60,17 +60,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
@@ -2102,7 +2099,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
-			thermal-sensors = <&thermal 0>;
+			thermal-sensors = <&thermal>;
 			sustainable-power = <717>;
 
 			cooling-maps {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 631d520cebee..26899fb768a7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -1149,7 +1149,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -1163,7 +1163,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -1177,7 +1177,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
@@ -1191,7 +1191,7 @@
 			};
 		};
 
-		sensor_thermal4: sensor-thermal4 {
+		sensor4_thermal: sensor4-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 3>;
@@ -1205,7 +1205,7 @@
 			};
 		};
 
-		sensor_thermal5: sensor-thermal5 {
+		sensor5_thermal: sensor5-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 4>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 61bd4df09df0..26cb5f14f9c7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -270,7 +270,7 @@
 	};
 
 	scif1_pins: scif1 {
-		groups = "scif1_data_b", "scif1_ctrl";
+		groups = "scif1_data_b";
 		function = "scif1";
 	};
 
@@ -330,7 +330,6 @@
 &scif1 {
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";
-	uart-has-rtscts;
 
 	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
index 7249871530ab..5eecbefa8a33 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -2,8 +2,8 @@
 /*
  * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
index 248ebb61aa79..5200d0bbd9e9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -711,7 +711,7 @@
 		clock-names = "pclk", "timer";
 	};
 
-	dmac: dmac@ff240000 {
+	dmac: dma-controller@ff240000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xff240000 0x0 0x4000>;
 		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 665b2e69455d..7ea48167747c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -19,7 +19,7 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	ir_rx {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
@@ -97,7 +97,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
-		vim-supply = <&vcc_io>;
+		vin-supply = <&vcc_io>;
 	};
 
 	vdd_core: vdd-core {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index aa22a0c22265..5d5d9574088c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -96,7 +96,6 @@
 			linux,default-trigger = "heartbeat";
 			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
 			default-state = "on";
-			mode = <0x23>;
 		};
 
 		user_led: led-1 {
@@ -104,7 +103,6 @@
 			linux,default-trigger = "mmc1";
 			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
-			mode = <0x05>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 8c821acb21ff..3cbe83e6fb9a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -489,7 +489,7 @@
 		status = "disabled";
 	};
 
-	dmac: dmac@ff1f0000 {
+	dmac: dma-controller@ff1f0000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xff1f0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -599,7 +599,7 @@
 
 	gpu: gpu@ff300000 {
 		compatible = "rockchip,rk3328-mali", "arm,mali-450";
-		reg = <0x0 0xff300000 0x0 0x40000>;
+		reg = <0x0 0xff300000 0x0 0x30000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c4dd2a6b4836..f81ce3240342 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -770,8 +770,8 @@
 	sd-uhs-sdr104;
 
 	/* Power supply */
-	vqmmc-supply = &vcc1v8_s3;	/* IO line */
-	vmmc-supply = &vcc_sdio;	/* card's power */
+	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
+	vmmc-supply = <&vcc_sdio>;	/* card's power */
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index e6c1c94c8d69..07737b65d7a3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -87,3 +87,8 @@
 		};
 	};
 };
+
+&wlan_host_wake_l {
+	/* Kevin has an external pull up, but Bob does not. */
+	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 1384dabbdf40..739937f70f8d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -237,6 +237,14 @@
 &edp {
 	status = "okay";
 
+	/*
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
+	 */
+	assigned-clocks = <&cru PCLK_EDP>;
+	assigned-clock-rates = <24000000>;
+
 	ports {
 		edp_out: port@1 {
 			reg = <1>;
@@ -395,6 +403,7 @@ ap_i2c_tp: &i2c5 {
 	};
 
 	wlan_host_wake_l: wlan-host-wake-l {
+		/* Kevin has an external pull up, but Bob does not */
 		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index c1bcc8ca3769..2f8e11710969 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -286,7 +286,7 @@
 
 	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
-		rockchip,cpu = <&i2s0 &i2s2>;
+		rockchip,cpu = <&i2s0 &spdif>;
 	};
 };
 
@@ -437,10 +437,6 @@ ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
-&i2s2 {
-	status = "okay";
-};
-
 &io_domains {
 	status = "okay";
 
@@ -537,6 +533,17 @@ ap_i2c_audio: &i2c8 {
 	vqmmc-supply = <&ppvar_sd_card_io>;
 };
 
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
 &spi1 {
 	status = "okay";
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index d5c7648c841d..f1fcc6b5b402 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -705,7 +705,6 @@
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 738cfd21df3e..354f54767bad 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -269,6 +269,7 @@
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 7c93f840bc64..e890166e7fd4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -55,7 +55,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vim-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc3v3_sys>;
 	};
 
 	vcc3v3_sys: vcc3v3-sys {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 2b5f001ff4a6..9e5d07f5712e 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -385,10 +385,6 @@
 	};
 };
 
-&cdn_dp {
-	status = "okay";
-};
-
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_b>;
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 292bb7e80cf3..f07f4b8231f9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -207,7 +207,7 @@
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
-	max-frequency = <150000000>;
+	max-frequency = <40000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc3v3_baseboard>;
@@ -232,6 +232,7 @@
 
 &usbdrd_dwc3_0 {
 	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index fb67db4619ea..7b27079fd611 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -25,6 +25,13 @@
 		};
 	};
 
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -55,7 +62,6 @@
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
@@ -422,9 +428,22 @@
 			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index b28888ea9262..a7ec81657503 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -446,7 +446,6 @@
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {
@@ -457,7 +456,7 @@
 	status = "okay";
 
 	bt656-supply = <&vcc_3v0>;
-	audio-supply = <&vcc_3v0>;
+	audio-supply = <&vcc1v8_codec>;
 	sdmmc-supply = <&vcc_sdio>;
 	gpio1830-supply = <&vcc_3v0>;
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 3871c7fd83b0..4255e2d7a72f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1477,6 +1477,7 @@
 			reg = <0xf780 0x24>;
 			clocks = <&sdhci>;
 			clock-names = "emmcclk";
+			drive-impedance-ohm = <50>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
@@ -1487,7 +1488,6 @@
 			clock-names = "refclk";
 			#phy-cells = <1>;
 			resets = <&cru SRST_PCIEPHY>;
-			drive-impedance-ohm = <50>;
 			reset-names = "phy";
 			status = "disabled";
 		};
@@ -1802,10 +1802,10 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index be97da132258..ba75adedbf79 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -599,8 +599,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -701,8 +701,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 42d1d219a3fd..d195b97ab2ee 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -59,7 +59,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01840000 0x00 0xC0000>;	/* GICR */
+		      <0x00 0x01840000 0x00 0xC0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,	/* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,	/* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;	/* GICV */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
@@ -453,13 +456,11 @@
 		clock-names = "clk_ahb", "clk_xin";
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
-		ti,otap-del-sel-hs400 = <0x4>;
 	};
 
 	sdhci1: mmc@fa00000 {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 59cc58f7d0c8..93e684bbd66c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -10,7 +10,6 @@
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x04a00000 0x00 0x100>;
 		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <48000000>;
 		current-speed = <115200>;
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
@@ -21,7 +20,6 @@
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x04a10000 0x00 0x100>;
 		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <48000000>;
 		current-speed = <115200>;
 		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 160 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am64.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am64.dtsi
index de6805b0c72c..e589c58f6088 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -85,6 +85,7 @@
 			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
 			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
 			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am642.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am642.dtsi
index e2b397c88401..8a76f4821b11 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am642.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am642.dtsi
@@ -60,6 +60,6 @@
 		cache-level = <2>;
 		cache-size = <0x40000>;
 		cache-line-size = <64>;
-		cache-sets = <512>;
+		cache-sets = <256>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index ba4e5d3e1ed7..4f232f575ab2 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -35,7 +35,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
+		      <0x00 0x01880000 0x00 0x90000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
@@ -117,7 +120,6 @@
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am65.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am65.dtsi
index a9fc1af03f27..1607db9b32dd 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -84,6 +84,7 @@
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
 			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
 			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index d14f3c18b65f..ee244df75eae 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -77,28 +77,28 @@
 	};
 };
 
-&wkup_pmx0 {
+&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
-			J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
-			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
-			J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
-			J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
-			J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
-			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
-			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
-			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
-			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
-			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio1-pins-default {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
-			J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+			J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 		>;
 	};
 };
@@ -131,15 +131,17 @@
 		>;
 	};
 
-	main_usbss0_pins_default: main-usbss0-pins-default {
+	vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
 		>;
 	};
+};
 
-	vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
+&main_pmx1 {
+	main_usbss0_pins_default: main-usbss0-pins-default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+			J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
 		>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index e8a41d09b45f..b1df17525dea 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,7 +32,7 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
@@ -54,7 +54,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -292,7 +295,16 @@
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x11c000 0x00 0x2b4>;
+		reg = <0x00 0x11c000 0x00 0x10c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c11c {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c11c 0x00 0xc>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -606,10 +618,10 @@
 		clock-names = "fck";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x0 0xff>;
 		cdns,no-bar-match-nbits = <64>;
-		vendor-id = /bits/ 16 <0x104c>;
-		device-id = /bits/ 16 <0xb00f>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00f>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
 		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 1044ec6c4b0d..8185c1627c6f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -56,7 +56,34 @@
 	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x4301c000 0x00 0x178>;
+		reg = <0x00 0x4301c000 0x00 0x34>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@0x4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@0x4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0xec>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@0x4301c174 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c174 0x00 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index b7005b803149..afe99f3920cc 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -60,7 +60,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -74,7 +74,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -84,7 +84,7 @@
 		cache-level = <2>;
 		cache-size = <0x100000>;
 		cache-line-size = <64>;
-		cache-sets = <2048>;
+		cache-sets = <1024>;
 		next-level-cache = <&msmc_l3>;
 	};
 
@@ -127,6 +127,7 @@
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
 			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index cf3482376c1e..d662eeb7d80a 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -42,7 +42,7 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: mux@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			reg = <0x00004080 0x50>;
 			#mux-control-cells = <1>;
@@ -76,7 +76,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -333,7 +336,6 @@
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
@@ -610,7 +612,7 @@
 		clock-names = "fck";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x0 0xff>;
 		vendor-id = <0x104c>;
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
@@ -636,7 +638,7 @@
 		clocks = <&k3_clks 239 1>;
 		clock-names = "fck";
 		max-functions = /bits/ 8 <6>;
-		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
 		dma-coherent;
 	};
 
@@ -658,7 +660,7 @@
 		clock-names = "fck";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x0 0xff>;
 		vendor-id = <0x104c>;
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
@@ -684,7 +686,7 @@
 		clocks = <&k3_clks 240 1>;
 		clock-names = "fck";
 		max-functions = /bits/ 8 <6>;
-		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
 		dma-coherent;
 	};
 
@@ -706,7 +708,7 @@
 		clock-names = "fck";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x0 0xff>;
 		vendor-id = <0x104c>;
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x20000 0x10000>;
@@ -732,7 +734,7 @@
 		clocks = <&k3_clks 241 1>;
 		clock-names = "fck";
 		max-functions = /bits/ 8 <6>;
-		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
 		dma-coherent;
 	};
 
@@ -754,7 +756,7 @@
 		clock-names = "fck";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x0 0xff>;
 		vendor-id = <0x104c>;
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x30000 0x10000>;
@@ -780,7 +782,7 @@
 		clocks = <&k3_clks 242 1>;
 		clock-names = "fck";
 		max-functions = /bits/ 8 <6>;
-		max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
 		dma-coherent;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -1049,7 +1051,6 @@
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
-		ti,strobe-sel = <0x77>;
 		dma-coherent;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index f0587fde147e..2cd8883de5b5 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -61,7 +61,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -75,7 +75,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -85,7 +85,7 @@
 		cache-level = <2>;
 		cache-size = <0x100000>;
 		cache-line-size = <64>;
-		cache-sets = <2048>;
+		cache-sets = <1024>;
 		next-level-cache = <&msmc_l3>;
 	};
 
@@ -136,6 +136,7 @@
 			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
 			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
 			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts linux-libre-5.15.126-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 4a86efa32d68..f7124e15f0ff 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -131,7 +131,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi0-data";
 			reg = <0x0 0x100000>;
 		};
 	};
@@ -149,7 +149,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi1-data";
 			reg = <0x0 0x84000>;
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi linux-libre-5.15.126-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 28dccb891a53..8278876ad33f 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ linux-libre-5.15.126-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -792,7 +792,7 @@
 		};
 
 		uart0: serial@ff000000 {
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
@@ -802,7 +802,7 @@
 		};
 
 		uart1: serial@ff010000 {
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
diff --git linux-libre-5.15-gnu/arch/arm64/configs/defconfig linux-libre-5.15.126-gnu/arch/arm64/configs/defconfig
index 545197bc0501..4972a81d40d6 100644
--- linux-libre-5.15-gnu/arch/arm64/configs/defconfig
+++ linux-libre-5.15.126-gnu/arch/arm64/configs/defconfig
@@ -921,7 +921,7 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_SUN6I=m
 CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR=y
 CONFIG_MV_XOR_V2=y
diff --git linux-libre-5.15-gnu/arch/arm64/crypto/Kconfig linux-libre-5.15.126-gnu/arch/arm64/crypto/Kconfig
index 55f19450091b..1a5406e599ba 100644
--- linux-libre-5.15-gnu/arch/arm64/crypto/Kconfig
+++ linux-libre-5.15.126-gnu/arch/arm64/crypto/Kconfig
@@ -59,6 +59,7 @@ config CRYPTO_GHASH_ARM64_CE
 	select CRYPTO_HASH
 	select CRYPTO_GF128MUL
 	select CRYPTO_LIB_AES
+	select CRYPTO_AEAD
 
 config CRYPTO_CRCT10DIF_ARM64_CE
 	tristate "CRCT10DIF digest algorithm using PMULL instructions"
diff --git linux-libre-5.15-gnu/arch/arm64/crypto/poly1305-glue.c linux-libre-5.15.126-gnu/arch/arm64/crypto/poly1305-glue.c
index 9c3d86e397bf..1fae18ba11ed 100644
--- linux-libre-5.15-gnu/arch/arm64/crypto/poly1305-glue.c
+++ linux-libre-5.15.126-gnu/arch/arm64/crypto/poly1305-glue.c
@@ -52,7 +52,7 @@ static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
 {
 	if (unlikely(!dctx->sset)) {
 		if (!dctx->rset) {
-			poly1305_init_arch(dctx, src);
+			poly1305_init_arm64(&dctx->h, src);
 			src += POLY1305_BLOCK_SIZE;
 			len -= POLY1305_BLOCK_SIZE;
 			dctx->rset = 1;
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/arch_gicv3.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/arch_gicv3.h
index 4ad22c3135db..5a0f792492af 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/arch_gicv3.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/arch_gicv3.h
@@ -26,12 +26,6 @@
  * sets the GP register's most significant bits to 0 with an explicit cast.
  */
 
-static inline void gic_write_eoir(u32 irq)
-{
-	write_sysreg_s(irq, SYS_ICC_EOIR1_EL1);
-	isb();
-}
-
 static __always_inline void gic_write_dir(u32 irq)
 {
 	write_sysreg_s(irq, SYS_ICC_DIR_EL1);
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/assembler.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/assembler.h
index bfa58409a4d4..448a575db8e8 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/assembler.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/assembler.h
@@ -107,6 +107,13 @@
 	hint	#20
 	.endm
 
+/*
+ * Clear Branch History instruction
+ */
+	.macro clearbhb
+	hint	#22
+	.endm
+
 /*
  * Speculation barrier
  */
@@ -830,4 +837,50 @@ alternative_endif
 
 #endif /* GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT */
 
+	.macro __mitigate_spectre_bhb_loop      tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb  spectre_bhb_patch_loop_iter
+	mov	\tmp, #32		// Patched to correct the immediate
+alternative_cb_end
+.Lspectre_bhb_loop\@:
+	b	. + 4
+	subs	\tmp, \tmp, #1
+	b.ne	.Lspectre_bhb_loop\@
+	sb
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	.macro mitigate_spectre_bhb_loop	tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb	spectre_bhb_patch_loop_mitigation_enable
+	b	.L_spectre_bhb_loop_done\@	// Patched to NOP
+alternative_cb_end
+	__mitigate_spectre_bhb_loop	\tmp
+.L_spectre_bhb_loop_done\@:
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	/* Save/restores x0-x3 to the stack */
+	.macro __mitigate_spectre_bhb_fw
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	stp	x0, x1, [sp, #-16]!
+	stp	x2, x3, [sp, #-16]!
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_3
+alternative_cb	smccc_patch_fw_mitigation_conduit
+	nop					// Patched to SMC/HVC #0
+alternative_cb_end
+	ldp	x2, x3, [sp], #16
+	ldp	x0, x1, [sp], #16
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	.macro mitigate_spectre_bhb_clear_insn
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb	spectre_bhb_patch_clearbhb
+	/* Patched to NOP when not supported */
+	clearbhb
+	isb
+alternative_cb_end
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
 #endif	/* __ASM_ASSEMBLER_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/atomic_ll_sc.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/atomic_ll_sc.h
index 13869b76b58c..abd302e521c0 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/atomic_ll_sc.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/atomic_ll_sc.h
@@ -12,19 +12,6 @@
 
 #include <linux/stringify.h>
 
-#ifdef CONFIG_ARM64_LSE_ATOMICS
-#define __LL_SC_FALLBACK(asm_ops)					\
-"	b	3f\n"							\
-"	.subsection	1\n"						\
-"3:\n"									\
-asm_ops "\n"								\
-"	b	4f\n"							\
-"	.previous\n"							\
-"4:\n"
-#else
-#define __LL_SC_FALLBACK(asm_ops) asm_ops
-#endif
-
 #ifndef CONFIG_CC_HAS_K_CONSTRAINT
 #define K
 #endif
@@ -43,12 +30,11 @@ __ll_sc_atomic_##op(int i, atomic_t *v)					\
 	int result;							\
 									\
 	asm volatile("// atomic_" #op "\n"				\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ldxr	%w0, %2\n"						\
-"	" #asm_op "	%w0, %w0, %w3\n"				\
-"	stxr	%w1, %w0, %2\n"						\
-"	cbnz	%w1, 1b\n")						\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ldxr	%w0, %2\n"					\
+	"	" #asm_op "	%w0, %w0, %w3\n"			\
+	"	stxr	%w1, %w0, %2\n"					\
+	"	cbnz	%w1, 1b\n"					\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i));				\
 }
@@ -61,13 +47,12 @@ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v)			\
 	int result;							\
 									\
 	asm volatile("// atomic_" #op "_return" #name "\n"		\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ld" #acq "xr	%w0, %2\n"					\
-"	" #asm_op "	%w0, %w0, %w3\n"				\
-"	st" #rel "xr	%w1, %w0, %2\n"					\
-"	cbnz	%w1, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ld" #acq "xr	%w0, %2\n"				\
+	"	" #asm_op "	%w0, %w0, %w3\n"			\
+	"	st" #rel "xr	%w1, %w0, %2\n"				\
+	"	cbnz	%w1, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -83,13 +68,12 @@ __ll_sc_atomic_fetch_##op##name(int i, atomic_t *v)			\
 	int val, result;						\
 									\
 	asm volatile("// atomic_fetch_" #op #name "\n"			\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %3\n"					\
-"1:	ld" #acq "xr	%w0, %3\n"					\
-"	" #asm_op "	%w1, %w0, %w4\n"				\
-"	st" #rel "xr	%w2, %w1, %3\n"					\
-"	cbnz	%w2, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %3\n"				\
+	"1:	ld" #acq "xr	%w0, %3\n"				\
+	"	" #asm_op "	%w1, %w0, %w4\n"			\
+	"	st" #rel "xr	%w2, %w1, %3\n"				\
+	"	cbnz	%w2, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -142,12 +126,11 @@ __ll_sc_atomic64_##op(s64 i, atomic64_t *v)				\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_" #op "\n"				\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ldxr	%0, %2\n"						\
-"	" #asm_op "	%0, %0, %3\n"					\
-"	stxr	%w1, %0, %2\n"						\
-"	cbnz	%w1, 1b")						\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ldxr	%0, %2\n"					\
+	"	" #asm_op "	%0, %0, %3\n"				\
+	"	stxr	%w1, %0, %2\n"					\
+	"	cbnz	%w1, 1b"					\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i));				\
 }
@@ -160,13 +143,12 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v)		\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_" #op "_return" #name "\n"		\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ld" #acq "xr	%0, %2\n"					\
-"	" #asm_op "	%0, %0, %3\n"					\
-"	st" #rel "xr	%w1, %0, %2\n"					\
-"	cbnz	%w1, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ld" #acq "xr	%0, %2\n"				\
+	"	" #asm_op "	%0, %0, %3\n"				\
+	"	st" #rel "xr	%w1, %0, %2\n"				\
+	"	cbnz	%w1, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -176,19 +158,18 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v)		\
 
 #define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\
 static inline long							\
-__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v)		\
+__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v)			\
 {									\
 	s64 result, val;						\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_fetch_" #op #name "\n"		\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %3\n"					\
-"1:	ld" #acq "xr	%0, %3\n"					\
-"	" #asm_op "	%1, %0, %4\n"					\
-"	st" #rel "xr	%w2, %1, %3\n"					\
-"	cbnz	%w2, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %3\n"				\
+	"1:	ld" #acq "xr	%0, %3\n"				\
+	"	" #asm_op "	%1, %0, %4\n"				\
+	"	st" #rel "xr	%w2, %1, %3\n"				\
+	"	cbnz	%w2, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -240,15 +221,14 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile("// atomic64_dec_if_positive\n"
-	__LL_SC_FALLBACK(
-"	prfm	pstl1strm, %2\n"
-"1:	ldxr	%0, %2\n"
-"	subs	%0, %0, #1\n"
-"	b.lt	2f\n"
-"	stlxr	%w1, %0, %2\n"
-"	cbnz	%w1, 1b\n"
-"	dmb	ish\n"
-"2:")
+	"	prfm	pstl1strm, %2\n"
+	"1:	ldxr	%0, %2\n"
+	"	subs	%0, %0, #1\n"
+	"	b.lt	2f\n"
+	"	stlxr	%w1, %0, %2\n"
+	"	cbnz	%w1, 1b\n"
+	"	dmb	ish\n"
+	"2:"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	:
 	: "cc", "memory");
@@ -274,7 +254,6 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
 		old = (u##sz)old;					\
 									\
 	asm volatile(							\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %[v]\n"				\
 	"1:	ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n"		\
 	"	eor	%" #w "[tmp], %" #w "[oldval], %" #w "[old]\n"	\
@@ -282,7 +261,7 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
 	"	st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n"	\
 	"	cbnz	%w[tmp], 1b\n"					\
 	"	" #mb "\n"						\
-	"2:")								\
+	"2:"								\
 	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
 	  [v] "+Q" (*(u##sz *)ptr)					\
 	: [old] __stringify(constraint) "r" (old), [new] "r" (new)	\
@@ -326,7 +305,6 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	unsigned long tmp, ret;						\
 									\
 	asm volatile("// __cmpxchg_double" #name "\n"			\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ldxp	%0, %1, %2\n"					\
 	"	eor	%0, %0, %3\n"					\
@@ -336,8 +314,8 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	"	st" #rel "xp	%w0, %5, %6, %2\n"			\
 	"	cbnz	%w0, 1b\n"					\
 	"	" #mb "\n"						\
-	"2:")								\
-	: "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr)	\
+	"2:"								\
+	: "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr)		\
 	: "r" (old1), "r" (old2), "r" (new1), "r" (new2)		\
 	: cl);								\
 									\
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/atomic_lse.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/atomic_lse.h
index da3280f639cd..28e96118c1e5 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/atomic_lse.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/atomic_lse.h
@@ -11,11 +11,11 @@
 #define __ASM_ATOMIC_LSE_H
 
 #define ATOMIC_OP(op, asm_op)						\
-static inline void __lse_atomic_##op(int i, atomic_t *v)			\
+static inline void __lse_atomic_##op(int i, atomic_t *v)		\
 {									\
 	asm volatile(							\
 	__LSE_PREAMBLE							\
-"	" #asm_op "	%w[i], %[v]\n"					\
+	"	" #asm_op "	%w[i], %[v]\n"				\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v));							\
 }
@@ -32,7 +32,7 @@ static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v)	\
 {									\
 	asm volatile(							\
 	__LSE_PREAMBLE							\
-"	" #asm_op #mb "	%w[i], %w[i], %[v]"				\
+	"	" #asm_op #mb "	%w[i], %w[i], %[v]"			\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v)							\
 	: cl);								\
@@ -130,7 +130,7 @@ static inline int __lse_atomic_sub_return##name(int i, atomic_t *v)	\
 	"	add	%w[i], %w[i], %w[tmp]"				\
 	: [i] "+&r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp)	\
 	: "r" (v)							\
-	: cl);							\
+	: cl);								\
 									\
 	return i;							\
 }
@@ -168,7 +168,7 @@ static inline void __lse_atomic64_##op(s64 i, atomic64_t *v)		\
 {									\
 	asm volatile(							\
 	__LSE_PREAMBLE							\
-"	" #asm_op "	%[i], %[v]\n"					\
+	"	" #asm_op "	%[i], %[v]\n"				\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v));							\
 }
@@ -185,7 +185,7 @@ static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\
 {									\
 	asm volatile(							\
 	__LSE_PREAMBLE							\
-"	" #asm_op #mb "	%[i], %[i], %[v]"				\
+	"	" #asm_op #mb "	%[i], %[i], %[v]"			\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v)							\
 	: cl);								\
@@ -272,7 +272,7 @@ static inline void __lse_atomic64_sub(s64 i, atomic64_t *v)
 }
 
 #define ATOMIC64_OP_SUB_RETURN(name, mb, cl...)				\
-static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)	\
+static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)\
 {									\
 	unsigned long tmp;						\
 									\
@@ -403,7 +403,7 @@ __lse__cmpxchg_double##name(unsigned long old1,				\
 	"	eor	%[old2], %[old2], %[oldval2]\n"			\
 	"	orr	%[old1], %[old1], %[old2]"			\
 	: [old1] "+&r" (x0), [old2] "+&r" (x1),				\
-	  [v] "+Q" (*(unsigned long *)ptr)				\
+	  [v] "+Q" (*(__uint128_t *)ptr)				\
 	: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4),		\
 	  [oldval1] "r" (oldval1), [oldval2] "r" (oldval2)		\
 	: cl);								\
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/barrier.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/barrier.h
index 451e11e5fd23..1c5a00598458 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/barrier.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/barrier.h
@@ -23,7 +23,7 @@
 #define dsb(opt)	asm volatile("dsb " #opt : : : "memory")
 
 #define psb_csync()	asm volatile("hint #17" : : : "memory")
-#define tsb_csync()	asm volatile("hint #18" : : : "memory")
+#define __tsb_csync()	asm volatile("hint #18" : : : "memory")
 #define csdb()		asm volatile("hint #20" : : : "memory")
 
 #ifdef CONFIG_ARM64_PSEUDO_NMI
@@ -46,6 +46,20 @@
 #define dma_rmb()	dmb(oshld)
 #define dma_wmb()	dmb(oshst)
 
+
+#define tsb_csync()								\
+	do {									\
+		/*								\
+		 * CPUs affected by Arm Erratum 2054223 or 2067961 needs	\
+		 * another TSB to ensure the trace is flushed. The barriers	\
+		 * don't have to be strictly back to back, as long as the	\
+		 * CPU is in trace prohibited state.				\
+		 */								\
+		if (cpus_have_final_cap(ARM64_WORKAROUND_TSB_FLUSH_FAILURE))	\
+			__tsb_csync();						\
+		__tsb_csync();							\
+	} while (0)
+
 /*
  * Generate a mask for array_index__nospec() that is ~0UL when 0 <= idx < sz
  * and 0 otherwise.
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/cpu.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/cpu.h
index 0f6d16faa540..a58e366f0b07 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/cpu.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/cpu.h
@@ -51,6 +51,7 @@ struct cpuinfo_arm64 {
 	u64		reg_id_aa64dfr1;
 	u64		reg_id_aa64isar0;
 	u64		reg_id_aa64isar1;
+	u64		reg_id_aa64isar2;
 	u64		reg_id_aa64mmfr0;
 	u64		reg_id_aa64mmfr1;
 	u64		reg_id_aa64mmfr2;
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/cpufeature.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/cpufeature.h
index ef6be92b1921..a77b5f49b3a6 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/cpufeature.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/cpufeature.h
@@ -637,6 +637,35 @@ static inline bool cpu_supports_mixed_endian_el0(void)
 	return id_aa64mmfr0_mixed_endian_el0(read_cpuid(ID_AA64MMFR0_EL1));
 }
 
+
+static inline bool supports_csv2p3(int scope)
+{
+	u64 pfr0;
+	u8 csv2_val;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+	else
+		pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	csv2_val = cpuid_feature_extract_unsigned_field(pfr0,
+							ID_AA64PFR0_CSV2_SHIFT);
+	return csv2_val == 3;
+}
+
+static inline bool supports_clearbhb(int scope)
+{
+	u64 isar2;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		isar2 = read_sysreg_s(SYS_ID_AA64ISAR2_EL1);
+	else
+		isar2 = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
+
+	return cpuid_feature_extract_unsigned_field(isar2,
+						    ID_AA64ISAR2_CLEARBHB_SHIFT);
+}
+
 const struct cpumask *system_32bit_el0_cpumask(void);
 DECLARE_STATIC_KEY_FALSE(arm64_mismatched_32bit_el0);
 
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/cputype.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/cputype.h
index 6231e1f0abe7..9cf5d9551e99 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/cputype.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/cputype.h
@@ -41,7 +41,7 @@
 	(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
 
 #define MIDR_CPU_MODEL(imp, partnum) \
-	(((imp)			<< MIDR_IMPLEMENTOR_SHIFT) | \
+	((_AT(u32, imp)		<< MIDR_IMPLEMENTOR_SHIFT) | \
 	(0xf			<< MIDR_ARCHITECTURE_SHIFT) | \
 	((partnum)		<< MIDR_PARTNUM_SHIFT))
 
@@ -60,6 +60,7 @@
 #define ARM_CPU_IMP_FUJITSU		0x46
 #define ARM_CPU_IMP_HISI		0x48
 #define ARM_CPU_IMP_APPLE		0x61
+#define ARM_CPU_IMP_AMPERE		0xC0
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -73,6 +74,15 @@
 #define ARM_CPU_PART_CORTEX_A76		0xD0B
 #define ARM_CPU_PART_NEOVERSE_N1	0xD0C
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_NEOVERSE_V1	0xD40
+#define ARM_CPU_PART_CORTEX_A78		0xD41
+#define ARM_CPU_PART_CORTEX_A78AE	0xD42
+#define ARM_CPU_PART_CORTEX_X1		0xD44
+#define ARM_CPU_PART_CORTEX_A510	0xD46
+#define ARM_CPU_PART_CORTEX_A710	0xD47
+#define ARM_CPU_PART_CORTEX_X2		0xD48
+#define ARM_CPU_PART_NEOVERSE_N2	0xD49
+#define ARM_CPU_PART_CORTEX_A78C	0xD4B
 
 #define APM_CPU_PART_POTENZA		0x000
 
@@ -103,6 +113,8 @@
 #define APPLE_CPU_PART_M1_ICESTORM	0x022
 #define APPLE_CPU_PART_M1_FIRESTORM	0x023
 
+#define AMPERE_CPU_PART_AMPERE1		0xAC3
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -113,6 +125,15 @@
 #define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_NEOVERSE_V1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V1)
+#define MIDR_CORTEX_A78	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78)
+#define MIDR_CORTEX_A78AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78AE)
+#define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
+#define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
+#define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
+#define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
+#define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
+#define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
@@ -133,6 +154,7 @@
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
 #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
 #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
+#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/debug-monitors.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/debug-monitors.h
index 657c921fd784..8de1a840ad97 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/debug-monitors.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/debug-monitors.h
@@ -76,7 +76,7 @@ struct task_struct;
 
 struct step_hook {
 	struct list_head node;
-	int (*fn)(struct pt_regs *regs, unsigned int esr);
+	int (*fn)(struct pt_regs *regs, unsigned long esr);
 };
 
 void register_user_step_hook(struct step_hook *hook);
@@ -87,7 +87,7 @@ void unregister_kernel_step_hook(struct step_hook *hook);
 
 struct break_hook {
 	struct list_head node;
-	int (*fn)(struct pt_regs *regs, unsigned int esr);
+	int (*fn)(struct pt_regs *regs, unsigned long esr);
 	u16 imm;
 	u16 mask; /* These bits are ignored when comparing with imm */
 };
@@ -116,6 +116,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs,
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);
 int kernel_active_single_step(void);
+void kernel_rewind_single_step(struct pt_regs *regs);
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 int reinstall_suspended_bps(struct pt_regs *regs);
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/efi.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/efi.h
index d3e1825337be..53cbbb96f7eb 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/efi.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/efi.h
@@ -14,7 +14,6 @@
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
-extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
 #else
 #define efi_init()
 #endif
@@ -26,6 +25,7 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 ({									\
 	efi_virtmap_load();						\
 	__efi_fpsimd_begin();						\
+	raw_spin_lock(&efi_rt_lock);					\
 })
 
 #define arch_efi_call_virt(p, f, args...)				\
@@ -37,10 +37,12 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 
 #define arch_efi_call_virt_teardown()					\
 ({									\
+	raw_spin_unlock(&efi_rt_lock);					\
 	__efi_fpsimd_end();						\
 	efi_virtmap_unload();						\
 })
 
+extern raw_spinlock_t efi_rt_lock;
 efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...);
 
 #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/el2_setup.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/el2_setup.h
index 3198acb2aad8..7f3c87f7a0ce 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/el2_setup.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/el2_setup.h
@@ -106,7 +106,7 @@
 	msr_s	SYS_ICC_SRE_EL2, x0
 	isb					// Make sure SRE is now set
 	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
-	tbz	x0, #0, 1f			// and check that it sticks
+	tbz	x0, #0, .Lskip_gicv3_\@		// and check that it sticks
 	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
 .Lskip_gicv3_\@:
 .endm
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/esr.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/esr.h
index 29f97eb3dad4..9f91c8906edd 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/esr.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/esr.h
@@ -68,6 +68,7 @@
 #define ESR_ELx_EC_MAX		(0x3F)
 
 #define ESR_ELx_EC_SHIFT	(26)
+#define ESR_ELx_EC_WIDTH	(6)
 #define ESR_ELx_EC_MASK		(UL(0x3F) << ESR_ELx_EC_SHIFT)
 #define ESR_ELx_EC(esr)		(((esr) & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT)
 
@@ -323,14 +324,14 @@
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 
-static inline bool esr_is_data_abort(u32 esr)
+static inline bool esr_is_data_abort(unsigned long esr)
 {
-	const u32 ec = ESR_ELx_EC(esr);
+	const unsigned long ec = ESR_ELx_EC(esr);
 
 	return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR;
 }
 
-const char *esr_get_class_string(u32 esr);
+const char *esr_get_class_string(unsigned long esr);
 #endif /* __ASSEMBLY */
 
 #endif /* __ASM_ESR_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/exception.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/exception.h
index 339477dca551..0e6535aa78c2 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/exception.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/exception.h
@@ -19,9 +19,9 @@
 #define __exception_irq_entry	__kprobes
 #endif
 
-static inline u32 disr_to_esr(u64 disr)
+static inline unsigned long disr_to_esr(u64 disr)
 {
-	unsigned int esr = ESR_ELx_EC_SERROR << ESR_ELx_EC_SHIFT;
+	unsigned long esr = ESR_ELx_EC_SERROR << ESR_ELx_EC_SHIFT;
 
 	if ((disr & DISR_EL1_IDS) == 0)
 		esr |= (disr & DISR_EL1_ESR_MASK);
@@ -57,23 +57,23 @@ asmlinkage void call_on_irq_stack(struct pt_regs *regs,
 				  void (*func)(struct pt_regs *));
 asmlinkage void asm_exit_to_user_mode(struct pt_regs *regs);
 
-void do_mem_abort(unsigned long far, unsigned int esr, struct pt_regs *regs);
+void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs);
 void do_undefinstr(struct pt_regs *regs);
 void do_bti(struct pt_regs *regs);
-void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr,
+void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
 			struct pt_regs *regs);
-void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs);
-void do_sve_acc(unsigned int esr, struct pt_regs *regs);
-void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs);
-void do_sysinstr(unsigned int esr, struct pt_regs *regs);
-void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs);
-void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr);
-void do_cp15instr(unsigned int esr, struct pt_regs *regs);
+void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs);
+void do_sve_acc(unsigned long esr, struct pt_regs *regs);
+void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs);
+void do_sysinstr(unsigned long esr, struct pt_regs *regs);
+void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs);
+void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr);
+void do_cp15instr(unsigned long esr, struct pt_regs *regs);
 void do_el0_svc(struct pt_regs *regs);
 void do_el0_svc_compat(struct pt_regs *regs);
-void do_ptrauth_fault(struct pt_regs *regs, unsigned int esr);
-void do_serror(struct pt_regs *regs, unsigned int esr);
+void do_ptrauth_fault(struct pt_regs *regs, unsigned long esr);
+void do_serror(struct pt_regs *regs, unsigned long esr);
 void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags);
 
-void panic_bad_stack(struct pt_regs *regs, unsigned int esr, unsigned long far);
+void panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
 #endif	/* __ASM_EXCEPTION_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/extable.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/extable.h
index b15eb4a3e6b2..840a35ed92ec 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/extable.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/extable.h
@@ -22,15 +22,6 @@ struct exception_table_entry
 
 #define ARCH_HAS_RELATIVE_EXTABLE
 
-static inline bool in_bpf_jit(struct pt_regs *regs)
-{
-	if (!IS_ENABLED(CONFIG_BPF_JIT))
-		return false;
-
-	return regs->pc >= BPF_JIT_REGION_START &&
-	       regs->pc < BPF_JIT_REGION_END;
-}
-
 #ifdef CONFIG_BPF_JIT
 int arm64_bpf_fixup_exception(const struct exception_table_entry *ex,
 			      struct pt_regs *regs);
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/fixmap.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/fixmap.h
index 4335800201c9..daff882883f9 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/fixmap.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/fixmap.h
@@ -62,9 +62,11 @@ enum fixed_addresses {
 #endif /* CONFIG_ACPI_APEI_GHES */
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	FIX_ENTRY_TRAMP_TEXT3,
+	FIX_ENTRY_TRAMP_TEXT2,
+	FIX_ENTRY_TRAMP_TEXT1,
 	FIX_ENTRY_TRAMP_DATA,
-	FIX_ENTRY_TRAMP_TEXT,
-#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT))
+#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT1))
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 	__end_of_permanent_fixed_addresses,
 
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/hwcap.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/hwcap.h
index 8c129db8232a..f68fbb207473 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/hwcap.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/hwcap.h
@@ -105,6 +105,9 @@
 #define KERNEL_HWCAP_RNG		__khwcap2_feature(RNG)
 #define KERNEL_HWCAP_BTI		__khwcap2_feature(BTI)
 #define KERNEL_HWCAP_MTE		__khwcap2_feature(MTE)
+#define KERNEL_HWCAP_ECV		__khwcap2_feature(ECV)
+#define KERNEL_HWCAP_AFP		__khwcap2_feature(AFP)
+#define KERNEL_HWCAP_RPRES		__khwcap2_feature(RPRES)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/insn.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/insn.h
index 6b776c8667b2..b02f0c328c8e 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/insn.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/insn.h
@@ -65,6 +65,7 @@ enum aarch64_insn_hint_cr_op {
 	AARCH64_INSN_HINT_PSB  = 0x11 << 5,
 	AARCH64_INSN_HINT_TSB  = 0x12 << 5,
 	AARCH64_INSN_HINT_CSDB = 0x14 << 5,
+	AARCH64_INSN_HINT_CLEARBHB = 0x16 << 5,
 
 	AARCH64_INSN_HINT_BTI   = 0x20 << 5,
 	AARCH64_INSN_HINT_BTIC  = 0x22 << 5,
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/io.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/io.h
index 7fd836bea7eb..3995652daf81 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/io.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/io.h
@@ -192,4 +192,8 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
 
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
+
 #endif	/* __ASM_IO_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/kernel-pgtable.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/kernel-pgtable.h
index 96dc0f7da258..a971d462f531 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/kernel-pgtable.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/kernel-pgtable.h
@@ -103,8 +103,8 @@
 /*
  * Initial memory map attributes.
  */
-#define SWAPPER_PTE_FLAGS	(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
-#define SWAPPER_PMD_FLAGS	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
+#define SWAPPER_PTE_FLAGS	(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED | PTE_UXN)
+#define SWAPPER_PMD_FLAGS	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S | PMD_SECT_UXN)
 
 #if ARM64_KERNEL_USES_PMD_MAPS
 #define SWAPPER_MM_MMUFLAGS	(PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS)
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/kvm_arm.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/kvm_arm.h
index 327120c0089f..f67a561e0935 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/kvm_arm.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/kvm_arm.h
@@ -91,7 +91,7 @@
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
 
 /* TCR_EL2 Registers bits */
-#define TCR_EL2_RES1		((1 << 31) | (1 << 23))
+#define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
 #define TCR_EL2_PS_MASK		(7 << TCR_EL2_PS_SHIFT)
@@ -276,7 +276,7 @@
 #define CPTR_EL2_TFP_SHIFT 10
 
 /* Hyp Coprocessor Trap Register */
-#define CPTR_EL2_TCPAC	(1 << 31)
+#define CPTR_EL2_TCPAC	(1U << 31)
 #define CPTR_EL2_TAM	(1 << 30)
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/kvm_emulate.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/kvm_emulate.h
index fd418955e31e..64f8a90d3327 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/kvm_emulate.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/kvm_emulate.h
@@ -366,8 +366,26 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
 
 static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 {
-	if (kvm_vcpu_abt_iss1tw(vcpu))
-		return true;
+	if (kvm_vcpu_abt_iss1tw(vcpu)) {
+		/*
+		 * Only a permission fault on a S1PTW should be
+		 * considered as a write. Otherwise, page tables baked
+		 * in a read-only memslot will result in an exception
+		 * being delivered in the guest.
+		 *
+		 * The drawback is that we end-up faulting twice if the
+		 * guest is using any of HW AF/DB: a translation fault
+		 * to map the page containing the PT (read only at
+		 * first), then a permission fault to allow the flags
+		 * to be set.
+		 */
+		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
+		case ESR_ELx_FSC_PERM:
+			return true;
+		default:
+			return false;
+		}
+	}
 
 	if (kvm_vcpu_trap_is_iabt(vcpu))
 		return false;
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/kvm_host.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/kvm_host.h
index f8be56d5342b..1713630bf8f5 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/kvm_host.h
@@ -711,6 +711,11 @@ static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt)
 	ctxt_sys_reg(cpu_ctxt, MPIDR_EL1) = read_cpuid_mpidr();
 }
 
+static inline bool kvm_system_needs_idmapped_vectors(void)
+{
+	return cpus_have_const_cap(ARM64_SPECTRE_V3A);
+}
+
 void kvm_arm_vcpu_ptrauth_trap(struct kvm_vcpu *vcpu);
 
 static inline void kvm_arch_hardware_unsetup(void) {}
@@ -790,6 +795,10 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 #define kvm_vcpu_has_pmu(vcpu)					\
 	(test_bit(KVM_ARM_VCPU_PMU_V3, (vcpu)->arch.features))
 
+#define kvm_supports_32bit_el0()				\
+	(system_supports_32bit_el0() &&				\
+	 !static_branch_unlikely(&arm64_mismatched_32bit_el0))
+
 int kvm_trng_call(struct kvm_vcpu *vcpu);
 #ifdef CONFIG_KVM
 extern phys_addr_t hyp_mem_base;
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/memory.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/memory.h
index f1745a843414..05886322c300 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/memory.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/memory.h
@@ -44,11 +44,8 @@
 #define _PAGE_OFFSET(va)	(-(UL(1) << (va)))
 #define PAGE_OFFSET		(_PAGE_OFFSET(VA_BITS))
 #define KIMAGE_VADDR		(MODULES_END)
-#define BPF_JIT_REGION_START	(_PAGE_END(VA_BITS_MIN))
-#define BPF_JIT_REGION_SIZE	(SZ_128M)
-#define BPF_JIT_REGION_END	(BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE)
 #define MODULES_END		(MODULES_VADDR + MODULES_VSIZE)
-#define MODULES_VADDR		(BPF_JIT_REGION_END)
+#define MODULES_VADDR		(_PAGE_END(VA_BITS_MIN))
 #define MODULES_VSIZE		(SZ_128M)
 #define VMEMMAP_START		(-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
 #define VMEMMAP_END		(VMEMMAP_START + VMEMMAP_SIZE)
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/module.lds.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/module.lds.h
index a11ccadd47d2..094701ec5500 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/module.lds.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/module.lds.h
@@ -1,8 +1,8 @@
 SECTIONS {
 #ifdef CONFIG_ARM64_MODULE_PLTS
-	.plt 0 (NOLOAD) : { BYTE(0) }
-	.init.plt 0 (NOLOAD) : { BYTE(0) }
-	.text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) }
+	.plt 0 : { BYTE(0) }
+	.init.plt 0 : { BYTE(0) }
+	.text.ftrace_trampoline 0 : { BYTE(0) }
 #endif
 
 #ifdef CONFIG_KASAN_SW_TAGS
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/mte-kasan.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/mte-kasan.h
index 22420e1f8c03..592aabb25b0e 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/mte-kasan.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/mte-kasan.h
@@ -5,6 +5,7 @@
 #ifndef __ASM_MTE_KASAN_H
 #define __ASM_MTE_KASAN_H
 
+#include <asm/compiler.h>
 #include <asm/mte-def.h>
 
 #ifndef __ASSEMBLY__
@@ -84,10 +85,12 @@ static inline void __dc_gzva(u64 p)
 static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag,
 					 bool init)
 {
-	u64 curr, mask, dczid_bs, end1, end2, end3;
+	u64 curr, mask, dczid, dczid_bs, dczid_dzp, end1, end2, end3;
 
 	/* Read DC G(Z)VA block size from the system register. */
-	dczid_bs = 4ul << (read_cpuid(DCZID_EL0) & 0xf);
+	dczid = read_cpuid(DCZID_EL0);
+	dczid_bs = 4ul << (dczid & 0xf);
+	dczid_dzp = (dczid >> 4) & 1;
 
 	curr = (u64)__tag_set(addr, tag);
 	mask = dczid_bs - 1;
@@ -106,7 +109,7 @@ static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag,
 	 */
 #define SET_MEMTAG_RANGE(stg_post, dc_gva)		\
 	do {						\
-		if (size >= 2 * dczid_bs) {		\
+		if (!dczid_dzp && size >= 2 * dczid_bs) {\
 			do {				\
 				curr = stg_post(curr);	\
 			} while (curr < end1);		\
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/mte.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/mte.h
index 02511650cffe..3e368ca66623 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/mte.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/mte.h
@@ -40,7 +40,9 @@ void mte_sync_tags(pte_t old_pte, pte_t pte);
 void mte_copy_page_tags(void *kto, const void *kfrom);
 void mte_thread_init_user(void);
 void mte_thread_switch(struct task_struct *next);
+void mte_cpu_setup(void);
 void mte_suspend_enter(void);
+void mte_suspend_exit(void);
 long set_mte_ctrl(struct task_struct *task, unsigned long arg);
 long get_mte_ctrl(struct task_struct *task);
 int mte_ptrace_copy_tags(struct task_struct *child, long request,
@@ -69,6 +71,9 @@ static inline void mte_thread_switch(struct task_struct *next)
 static inline void mte_suspend_enter(void)
 {
 }
+static inline void mte_suspend_exit(void)
+{
+}
 static inline long set_mte_ctrl(struct task_struct *task, unsigned long arg)
 {
 	return 0;
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/page.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/page.h
index f98c91bbd7c1..993a27ea6f54 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/page.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/page.h
@@ -41,7 +41,6 @@ void tag_clear_highpage(struct page *to);
 
 typedef struct page *pgtable_t;
 
-int pfn_valid(unsigned long pfn);
 int pfn_is_map_memory(unsigned long pfn);
 
 #include <asm/memory.h>
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/pgalloc.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgalloc.h
index 8433a2058eb1..237224484d0f 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/pgalloc.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgalloc.h
@@ -76,7 +76,7 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t ptep,
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
 {
-	VM_BUG_ON(mm != &init_mm);
+	VM_BUG_ON(mm && mm != &init_mm);
 	__pmd_populate(pmdp, __pa(ptep), PMD_TYPE_TABLE | PMD_TABLE_UXN);
 }
 
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/pgtable-hwdef.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgtable-hwdef.h
index 40085e53f573..66671ff05183 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/pgtable-hwdef.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgtable-hwdef.h
@@ -273,6 +273,8 @@
 #define TCR_NFD1		(UL(1) << 54)
 #define TCR_E0PD0		(UL(1) << 55)
 #define TCR_E0PD1		(UL(1) << 56)
+#define TCR_TCMA0		(UL(1) << 57)
+#define TCR_TCMA1		(UL(1) << 58)
 
 /*
  * TTBR.
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/pgtable-prot.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgtable-prot.h
index 7032f04c8ac6..b1e1b74d993c 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/pgtable-prot.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgtable-prot.h
@@ -92,7 +92,7 @@ extern bool arm64_use_ng_mappings;
 #define __P001  PAGE_READONLY
 #define __P010  PAGE_READONLY
 #define __P011  PAGE_READONLY
-#define __P100  PAGE_EXECONLY
+#define __P100  PAGE_READONLY_EXEC	/* PAGE_EXECONLY if Enhanced PAN */
 #define __P101  PAGE_READONLY_EXEC
 #define __P110  PAGE_READONLY_EXEC
 #define __P111  PAGE_READONLY_EXEC
@@ -101,7 +101,7 @@ extern bool arm64_use_ng_mappings;
 #define __S001  PAGE_READONLY
 #define __S010  PAGE_SHARED
 #define __S011  PAGE_SHARED
-#define __S100  PAGE_EXECONLY
+#define __S100  PAGE_READONLY_EXEC	/* PAGE_EXECONLY if Enhanced PAN */
 #define __S101  PAGE_READONLY_EXEC
 #define __S110  PAGE_SHARED_EXEC
 #define __S111  PAGE_SHARED_EXEC
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/pgtable.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgtable.h
index dfa76afa0ccf..ed57717cd004 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/pgtable.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/pgtable.h
@@ -67,9 +67,15 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  * page table entry, taking care of 52-bit addresses.
  */
 #ifdef CONFIG_ARM64_PA_BITS_52
-#define __pte_to_phys(pte)	\
-	((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36))
-#define __phys_to_pte_val(phys)	(((phys) | ((phys) >> 36)) & PTE_ADDR_MASK)
+static inline phys_addr_t __pte_to_phys(pte_t pte)
+{
+	return (pte_val(pte) & PTE_ADDR_LOW) |
+		((pte_val(pte) & PTE_ADDR_HIGH) << 36);
+}
+static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
+{
+	return (phys | (phys >> 36)) & PTE_ADDR_MASK;
+}
 #else
 #define __pte_to_phys(pte)	(pte_val(pte) & PTE_ADDR_MASK)
 #define __phys_to_pte_val(phys)	(phys)
@@ -529,7 +535,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				 PMD_TYPE_TABLE)
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 				 PMD_TYPE_SECT)
-#define pmd_leaf(pmd)		pmd_sect(pmd)
+#define pmd_leaf(pmd)		(pmd_present(pmd) && !pmd_table(pmd))
 #define pmd_bad(pmd)		(!pmd_table(pmd))
 
 #define pmd_leaf_size(pmd)	(pmd_cont(pmd) ? CONT_PMD_SIZE : PMD_SIZE)
@@ -619,7 +625,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 #define pud_none(pud)		(!pud_val(pud))
 #define pud_bad(pud)		(!pud_table(pud))
 #define pud_present(pud)	pte_present(pud_pte(pud))
-#define pud_leaf(pud)		pud_sect(pud)
+#define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
 #define pud_valid(pud)		pte_valid(pud_pte(pud))
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
@@ -1011,18 +1017,6 @@ static inline bool arch_wants_old_prefaulted_pte(void)
 }
 #define arch_wants_old_prefaulted_pte	arch_wants_old_prefaulted_pte
 
-static inline pgprot_t arch_filter_pgprot(pgprot_t prot)
-{
-	if (cpus_have_const_cap(ARM64_HAS_EPAN))
-		return prot;
-
-	if (pgprot_val(prot) != pgprot_val(PAGE_EXECONLY))
-		return prot;
-
-	return PAGE_READONLY_EXEC;
-}
-
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_PGTABLE_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/processor.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/processor.h
index ee2bdc1b9f5b..7364530de0a7 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/processor.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/processor.h
@@ -204,8 +204,9 @@ void tls_preserve_current_state(void);
 
 static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
 {
+	s32 previous_syscall = regs->syscallno;
 	memset(regs, 0, sizeof(*regs));
-	forget_syscall(regs);
+	regs->syscallno = previous_syscall;
 	regs->pc = pc;
 
 	if (system_uses_irq_prio_masking())
@@ -239,13 +240,13 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
 }
 #endif
 
-static inline bool is_ttbr0_addr(unsigned long addr)
+static __always_inline bool is_ttbr0_addr(unsigned long addr)
 {
 	/* entry assembly clears tags for TTBR0 addrs */
 	return addr < TASK_SIZE;
 }
 
-static inline bool is_ttbr1_addr(unsigned long addr)
+static __always_inline bool is_ttbr1_addr(unsigned long addr)
 {
 	/* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */
 	return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
@@ -335,12 +336,10 @@ long get_tagged_addr_ctrl(struct task_struct *task);
  * of header definitions for the use of task_stack_page.
  */
 
-#define current_top_of_stack()								\
-({											\
-	struct stack_info _info;							\
-	BUG_ON(!on_accessible_stack(current, current_stack_pointer, 1, &_info));	\
-	_info.high;									\
-})
+/*
+ * The top of the current task's task stack
+ */
+#define current_top_of_stack()	((unsigned long)current->stack + THREAD_SIZE)
 #define on_thread_stack()	(on_task_stack(current, current_stack_pointer, 1, NULL))
 
 #endif /* __ASSEMBLY__ */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/rwonce.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/rwonce.h
index 1bce62fa908a..56f7b1d4d54b 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/rwonce.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/rwonce.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_RWONCE_H
 #define __ASM_RWONCE_H
 
-#ifdef CONFIG_LTO
+#if defined(CONFIG_LTO) && !defined(__ASSEMBLY__)
 
 #include <linux/compiler_types.h>
 #include <asm/alternative-macros.h>
@@ -66,7 +66,7 @@
 })
 
 #endif	/* !BUILD_VDSO */
-#endif	/* CONFIG_LTO */
+#endif	/* CONFIG_LTO && !__ASSEMBLY__ */
 
 #include <asm-generic/rwonce.h>
 
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/scs.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/scs.h
index 8297bccf0784..5cd4d09bc69d 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/scs.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/scs.h
@@ -9,15 +9,16 @@
 #ifdef CONFIG_SHADOW_CALL_STACK
 	scs_sp	.req	x18
 
-	.macro scs_load tsk
-	ldr	scs_sp, [\tsk, #TSK_TI_SCS_SP]
+	.macro scs_load_current
+	get_current_task scs_sp
+	ldr	scs_sp, [scs_sp, #TSK_TI_SCS_SP]
 	.endm
 
 	.macro scs_save tsk
 	str	scs_sp, [\tsk, #TSK_TI_SCS_SP]
 	.endm
 #else
-	.macro scs_load tsk
+	.macro scs_load_current
 	.endm
 
 	.macro scs_save tsk
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/sections.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/sections.h
index e4ad9db53af1..552891e626e5 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/sections.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/sections.h
@@ -22,4 +22,9 @@ extern char __irqentry_text_start[], __irqentry_text_end[];
 extern char __mmuoff_data_start[], __mmuoff_data_end[];
 extern char __entry_tramp_text_start[], __entry_tramp_text_end[];
 
+static inline size_t entry_tramp_text_size(void)
+{
+	return __entry_tramp_text_end - __entry_tramp_text_start;
+}
+
 #endif /* __ASM_SECTIONS_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/spectre.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/spectre.h
index f62ca39da6c5..aa3d3607d5c8 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/spectre.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/spectre.h
@@ -67,7 +67,8 @@ struct bp_hardening_data {
 
 DECLARE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
 
-static inline void arm64_apply_bp_hardening(void)
+/* Called during entry so must be __always_inline */
+static __always_inline void arm64_apply_bp_hardening(void)
 {
 	struct bp_hardening_data *d;
 
@@ -93,5 +94,9 @@ void spectre_v4_enable_task_mitigation(struct task_struct *tsk);
 
 enum mitigation_state arm64_get_meltdown_state(void);
 
+enum mitigation_state arm64_get_spectre_bhb_state(void);
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
+u8 spectre_bhb_loop_affected(int scope);
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
 #endif	/* __ASSEMBLY__ */
 #endif	/* __ASM_SPECTRE_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/syscall_wrapper.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/syscall_wrapper.h
index b383b4802a7b..d30217c21eff 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/syscall_wrapper.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/syscall_wrapper.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_SYSCALL_WRAPPER_H
 #define __ASM_SYSCALL_WRAPPER_H
 
-struct pt_regs;
+#include <asm/ptrace.h>
 
 #define SC_ARM64_REGS_TO_ARGS(x, ...)				\
 	__MAP(x,__SC_ARGS					\
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/sysreg.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/sysreg.h
index b268082d67ed..543eb08fa8e5 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/sysreg.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/sysreg.h
@@ -109,8 +109,14 @@
 #define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
 
 #define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
+#define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
 #define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CGSW			sys_insn(1, 0, 7, 10, 4)
+#define SYS_DC_CGDSW			sys_insn(1, 0, 7, 10, 6)
 #define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+#define SYS_DC_CIGSW			sys_insn(1, 0, 7, 14, 4)
+#define SYS_DC_CIGDSW			sys_insn(1, 0, 7, 14, 6)
 
 /*
  * System registers, organised loosely by encoding but grouped together
@@ -180,6 +186,7 @@
 
 #define SYS_ID_AA64ISAR0_EL1		sys_reg(3, 0, 0, 6, 0)
 #define SYS_ID_AA64ISAR1_EL1		sys_reg(3, 0, 0, 6, 1)
+#define SYS_ID_AA64ISAR2_EL1		sys_reg(3, 0, 0, 6, 2)
 
 #define SYS_ID_AA64MMFR0_EL1		sys_reg(3, 0, 0, 7, 0)
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
@@ -764,6 +771,21 @@
 #define ID_AA64ISAR1_GPI_NI			0x0
 #define ID_AA64ISAR1_GPI_IMP_DEF		0x1
 
+/* id_aa64isar2 */
+#define ID_AA64ISAR2_CLEARBHB_SHIFT	28
+#define ID_AA64ISAR2_RPRES_SHIFT	4
+#define ID_AA64ISAR2_WFXT_SHIFT		0
+
+#define ID_AA64ISAR2_RPRES_8BIT		0x0
+#define ID_AA64ISAR2_RPRES_12BIT	0x1
+/*
+ * Value 0x1 has been removed from the architecture, and is
+ * reserved, but has not yet been removed from the ARM ARM
+ * as of ARM DDI 0487G.b.
+ */
+#define ID_AA64ISAR2_WFXT_NI		0x0
+#define ID_AA64ISAR2_WFXT_SUPPORTED	0x2
+
 /* id_aa64pfr0 */
 #define ID_AA64PFR0_CSV3_SHIFT		60
 #define ID_AA64PFR0_CSV2_SHIFT		56
@@ -881,6 +903,8 @@
 #endif
 
 /* id_aa64mmfr1 */
+#define ID_AA64MMFR1_ECBHB_SHIFT	60
+#define ID_AA64MMFR1_AFP_SHIFT		44
 #define ID_AA64MMFR1_ETS_SHIFT		36
 #define ID_AA64MMFR1_TWED_SHIFT		32
 #define ID_AA64MMFR1_XNX_SHIFT		28
@@ -1076,10 +1100,6 @@
 #define CPACR_EL1_ZEN_EL0EN	(BIT(17)) /* enable EL0 access, if EL1EN set */
 #define CPACR_EL1_ZEN		(CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN)
 
-/* TCR EL1 Bit Definitions */
-#define SYS_TCR_EL1_TCMA1	(BIT(58))
-#define SYS_TCR_EL1_TCMA0	(BIT(57))
-
 /* GCR_EL1 Definitions */
 #define SYS_GCR_EL1_RRND	(BIT(16))
 #define SYS_GCR_EL1_EXCL_MASK	0xffffUL
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/system_misc.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/system_misc.h
index 305a7157c6a6..0eb7709422e2 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/system_misc.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/system_misc.h
@@ -23,9 +23,9 @@ void die(const char *msg, struct pt_regs *regs, int err);
 struct siginfo;
 void arm64_notify_die(const char *str, struct pt_regs *regs,
 		      int signo, int sicode, unsigned long far,
-		      int err);
+		      unsigned long err);
 
-void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned long,
 					     struct pt_regs *),
 			   int sig, int code, const char *name);
 
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/traps.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/traps.h
index 54f32a0675df..6e5826470bea 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/traps.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/traps.h
@@ -24,7 +24,7 @@ struct undef_hook {
 
 void register_undef_hook(struct undef_hook *hook);
 void unregister_undef_hook(struct undef_hook *hook);
-void force_signal_inject(int signal, int code, unsigned long address, unsigned int err);
+void force_signal_inject(int signal, int code, unsigned long address, unsigned long err);
 void arm64_notify_segfault(unsigned long addr);
 void arm64_force_sig_fault(int signo, int code, unsigned long far, const char *str);
 void arm64_force_sig_mceerr(int code, unsigned long far, short lsb, const char *str);
@@ -57,7 +57,7 @@ static inline int in_entry_text(unsigned long ptr)
  * errors share the same encoding as an all-zeros encoding from a CPU that
  * doesn't support RAS.
  */
-static inline bool arm64_is_ras_serror(u32 esr)
+static inline bool arm64_is_ras_serror(unsigned long esr)
 {
 	WARN_ON(preemptible());
 
@@ -77,9 +77,9 @@ static inline bool arm64_is_ras_serror(u32 esr)
  * We treat them as Uncontainable.
  * Non-RAS SError's are reported as Uncontained/Uncategorized.
  */
-static inline u32 arm64_ras_serror_get_severity(u32 esr)
+static inline unsigned long arm64_ras_serror_get_severity(unsigned long esr)
 {
-	u32 aet = esr & ESR_ELx_AET;
+	unsigned long aet = esr & ESR_ELx_AET;
 
 	if (!arm64_is_ras_serror(esr)) {
 		/* Not a RAS error, we can't interpret the ESR. */
@@ -98,6 +98,6 @@ static inline u32 arm64_ras_serror_get_severity(u32 esr)
 	return aet;
 }
 
-bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr);
-void __noreturn arm64_serror_panic(struct pt_regs *regs, u32 esr);
+bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr);
+void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr);
 #endif
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/uaccess.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/uaccess.h
index 190b494e22ab..0fd6056ba412 100644
--- linux-libre-5.15-gnu/arch/arm64/include/asm/uaccess.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/uaccess.h
@@ -292,12 +292,22 @@ do {									\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 } while (0)
 
+/*
+ * We must not call into the scheduler between uaccess_ttbr0_enable() and
+ * uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
+ * we must evaluate these outside of the critical section.
+ */
 #define __raw_get_user(x, ptr, err)					\
 do {									\
+	__typeof__(*(ptr)) __user *__rgu_ptr = (ptr);			\
+	__typeof__(x) __rgu_val;					\
 	__chk_user_ptr(ptr);						\
+									\
 	uaccess_ttbr0_enable();						\
-	__raw_get_mem("ldtr", x, ptr, err);				\
+	__raw_get_mem("ldtr", __rgu_val, __rgu_ptr, err);		\
 	uaccess_ttbr0_disable();					\
+									\
+	(x) = __rgu_val;						\
 } while (0)
 
 #define __get_user_error(x, ptr, err)					\
@@ -321,14 +331,22 @@ do {									\
 
 #define get_user	__get_user
 
+/*
+ * We must not call into the scheduler between __uaccess_enable_tco_async() and
+ * __uaccess_disable_tco_async(). As `dst` and `src` may contain blocking
+ * functions, we must evaluate these outside of the critical section.
+ */
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
+	__typeof__(dst) __gkn_dst = (dst);				\
+	__typeof__(src) __gkn_src = (src);				\
 	int __gkn_err = 0;						\
 									\
 	__uaccess_enable_tco_async();					\
-	__raw_get_mem("ldr", *((type *)(dst)),				\
-		      (__force type *)(src), __gkn_err);		\
+	__raw_get_mem("ldr", *((type *)(__gkn_dst)),			\
+		      (__force type *)(__gkn_src), __gkn_err);		\
 	__uaccess_disable_tco_async();					\
+									\
 	if (unlikely(__gkn_err))					\
 		goto err_label;						\
 } while (0)
@@ -367,11 +385,19 @@ do {									\
 	}								\
 } while (0)
 
+/*
+ * We must not call into the scheduler between uaccess_ttbr0_enable() and
+ * uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
+ * we must evaluate these outside of the critical section.
+ */
 #define __raw_put_user(x, ptr, err)					\
 do {									\
-	__chk_user_ptr(ptr);						\
+	__typeof__(*(ptr)) __user *__rpu_ptr = (ptr);			\
+	__typeof__(*(ptr)) __rpu_val = (x);				\
+	__chk_user_ptr(__rpu_ptr);					\
+									\
 	uaccess_ttbr0_enable();						\
-	__raw_put_mem("sttr", x, ptr, err);				\
+	__raw_put_mem("sttr", __rpu_val, __rpu_ptr, err);		\
 	uaccess_ttbr0_disable();					\
 } while (0)
 
@@ -396,14 +422,22 @@ do {									\
 
 #define put_user	__put_user
 
+/*
+ * We must not call into the scheduler between __uaccess_enable_tco_async() and
+ * __uaccess_disable_tco_async(). As `dst` and `src` may contain blocking
+ * functions, we must evaluate these outside of the critical section.
+ */
 #define __put_kernel_nofault(dst, src, type, err_label)			\
 do {									\
+	__typeof__(dst) __pkn_dst = (dst);				\
+	__typeof__(src) __pkn_src = (src);				\
 	int __pkn_err = 0;						\
 									\
 	__uaccess_enable_tco_async();					\
-	__raw_put_mem("str", *((type *)(src)),				\
-		      (__force type *)(dst), __pkn_err);		\
+	__raw_put_mem("str", *((type *)(__pkn_src)),			\
+		      (__force type *)(__pkn_dst), __pkn_err);		\
 	__uaccess_disable_tco_async();					\
+									\
 	if (unlikely(__pkn_err))					\
 		goto err_label;						\
 } while(0)
diff --git linux-libre-5.15-gnu/arch/arm64/include/asm/vectors.h linux-libre-5.15.126-gnu/arch/arm64/include/asm/vectors.h
new file mode 100644
index 000000000000..bc9a2145f419
--- /dev/null
+++ linux-libre-5.15.126-gnu/arch/arm64/include/asm/vectors.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 ARM Ltd.
+ */
+#ifndef __ASM_VECTORS_H
+#define __ASM_VECTORS_H
+
+#include <linux/bug.h>
+#include <linux/percpu.h>
+
+#include <asm/fixmap.h>
+
+extern char vectors[];
+extern char tramp_vectors[];
+extern char __bp_harden_el1_vectors[];
+
+/*
+ * Note: the order of this enum corresponds to two arrays in entry.S:
+ * tramp_vecs and __bp_harden_el1_vectors. By default the canonical
+ * 'full fat' vectors are used directly.
+ */
+enum arm64_bp_harden_el1_vectors {
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	/*
+	 * Perform the BHB loop mitigation, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_LOOP,
+
+	/*
+	 * Make the SMC call for firmware mitigation, before branching to the
+	 * canonical vectors.
+	 */
+	EL1_VECTOR_BHB_FW,
+
+	/*
+	 * Use the ClearBHB instruction, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_CLEAR_INSN,
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+	/*
+	 * Remap the kernel before branching to the canonical vectors.
+	 */
+	EL1_VECTOR_KPTI,
+};
+
+#ifndef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+#define EL1_VECTOR_BHB_LOOP		-1
+#define EL1_VECTOR_BHB_FW		-1
+#define EL1_VECTOR_BHB_CLEAR_INSN	-1
+#endif /* !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+/* The vectors to use on return from EL0. e.g. to remap the kernel */
+DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
+
+#ifndef CONFIG_UNMAP_KERNEL_AT_EL0
+#define TRAMP_VALIAS	0ul
+#endif
+
+static inline const char *
+arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
+{
+	if (arm64_kernel_unmapped_at_el0())
+		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
+
+	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
+
+	return __bp_harden_el1_vectors + SZ_2K * slot;
+}
+
+#endif /* __ASM_VECTORS_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/uapi/asm/hwcap.h linux-libre-5.15.126-gnu/arch/arm64/include/uapi/asm/hwcap.h
index b8f41aa234ee..f03731847d9d 100644
--- linux-libre-5.15-gnu/arch/arm64/include/uapi/asm/hwcap.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/uapi/asm/hwcap.h
@@ -75,5 +75,8 @@
 #define HWCAP2_RNG		(1 << 16)
 #define HWCAP2_BTI		(1 << 17)
 #define HWCAP2_MTE		(1 << 18)
+#define HWCAP2_ECV		(1 << 19)
+#define HWCAP2_AFP		(1 << 20)
+#define HWCAP2_RPRES		(1 << 21)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git linux-libre-5.15-gnu/arch/arm64/include/uapi/asm/kvm.h linux-libre-5.15.126-gnu/arch/arm64/include/uapi/asm/kvm.h
index b3edde68bc3e..323e251ed37b 100644
--- linux-libre-5.15-gnu/arch/arm64/include/uapi/asm/kvm.h
+++ linux-libre-5.15.126-gnu/arch/arm64/include/uapi/asm/kvm.h
@@ -281,6 +281,11 @@ struct kvm_arm_copy_mte_tags {
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED     	(1U << 4)
 
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3	KVM_REG_ARM_FW_REG(3)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED	2
+
 /* SVE registers */
 #define KVM_REG_ARM64_SVE		(0x15 << KVM_REG_ARM_COPROC_SHIFT)
 
diff --git linux-libre-5.15-gnu/arch/arm64/kernel/Makefile linux-libre-5.15.126-gnu/arch/arm64/kernel/Makefile
index 3f1490bfb938..749e31475e41 100644
--- linux-libre-5.15-gnu/arch/arm64/kernel/Makefile
+++ linux-libre-5.15.126-gnu/arch/arm64/kernel/Makefile
@@ -74,6 +74,10 @@ obj-$(CONFIG_ARM64_MTE)			+= mte.o
 obj-y					+= vdso-wrap.o
 obj-$(CONFIG_COMPAT_VDSO)		+= vdso32-wrap.o
 
+# Force dependency (vdso*-wrap.S includes vdso.so through incbin)
+$(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
+$(obj)/vdso32-wrap.o: $(obj)/vdso32/vdso.so
+
 obj-y					+= probes/
 head-y					:= head.o
 extra-y					+= $(head-y) vmlinux.lds
diff --git linux-libre-5.15-gnu/arch/arm64/kernel/alternative.c linux-libre-5.15.126-gnu/arch/arm64/kernel/alternative.c
index 3fb79b76e9d9..7bbf5104b7b7 100644
--- linux-libre-5.15-gnu/arch/arm64/kernel/alternative.c
+++ linux-libre-5.15.126-gnu/arch/arm64/kernel/alternative.c
@@ -42,7 +42,7 @@ bool alternative_is_applied(u16 cpufeature)
 /*
  * Check if the target PC is within an alternative block.
  */
-static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
+static __always_inline bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 {
 	unsigned long replptr = (unsigned long)ALT_REPL_PTR(alt);
 	return !(pc >= replptr && pc <= (replptr + alt->alt_len));
@@ -50,7 +50,7 @@ static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 
 #define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))
 
-static u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
+static __always_inline u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
 {
 	u32 insn;
 
@@ -95,7 +95,7 @@ static u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnp
 	return insn;
 }
 
-static void patch_alternative(struct alt_instr *alt,
+static noinstr void patch_alternative(struct alt_instr *alt,
 			      __le32 *origptr, __le32 *updptr, int nr_inst)
 {
 	__le32 *replptr;
diff --git linux-libre-5.15-gnu/arch/arm64/kernel/armv8_deprecated.c linux-libre-5.15.126-gnu/arch/arm64/kernel/armv8_deprecated.c
index 0e86e8b9cedd..c5da9d1e954a 100644
--- linux-libre-5.15-gnu/arch/arm64/kernel/armv8_deprecated.c
+++ linux-libre-5.15.126-gnu/arch/arm64/kernel/armv8_deprecated.c
@@ -59,6 +59,7 @@ struct insn_emulation {
 static LIST_HEAD(insn_emulation);
 static int nr_insn_emulated __initdata;
 static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
+static DEFINE_MUTEX(insn_emulation_mutex);
 
 static void register_emulation_hooks(struct insn_emulation_ops *ops)
 {
@@ -207,10 +208,10 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
 				  loff_t *ppos)
 {
 	int ret = 0;
-	struct insn_emulation *insn = (struct insn_emulation *) table->data;
+	struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode);
 	enum insn_emulation_mode prev_mode = insn->current_mode;
 
-	table->data = &insn->current_mode;
+	mutex_lock(&insn_emulation_mutex);
 	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 
 	if (ret || !write || prev_mode == insn->current_mode)
@@ -223,7 +224,7 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
 		update_insn_emulation_mode(insn, INSN_UNDEF);
 	}
 ret:
-	table->data = insn;
+	mutex_unlock(&insn_emulation_mutex);
 	return ret;
 }
 
@@ -247,7 +248,7 @@ static void __init register_insn_emulation_sysctl(void)
 		sysctl->maxlen = sizeof(int);
 
 		sysctl->procname = insn->ops->name;
-		sysctl->data = insn;
+		sysctl->data = &insn->current_mode;
 		sysctl->extra1 = &insn->min;
 		sysctl->extra2 = &insn->max;
 		sysctl->proc_handler = emulation_proc_handler;
diff --git linux-libre-5.15-gnu/arch/arm64/kernel/cacheinfo.c linux-libre-5.15.126-gnu/arch/arm64/kernel/cacheinfo.c
index 587543c6c51c..97c42be71338 100644
--- linux-libre-5.15-gnu/arch/arm64/kernel/cacheinfo.c
+++ linux-libre-5.15.126-gnu/arch/arm64/kernel/cacheinfo.c
@@ -45,7 +45,8 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 
 int init_cache_level(unsigned int cpu)
 {
-	unsigned int ctype, level, leaves, fw_level;
+	unsigned int ctype, level, leaves;
+	int fw_level;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 
 	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
@@ -63,6 +64,9 @@ int init_cache_level(unsigned int cpu)
 	else
 		fw_level = acpi_find_last_cache_level(cpu);
 
+	if (fw_level < 0)
+		return fw_level;
+
 	if (level < fw_level) {
 		/*
 		 * some external caches not specified in CLIDR_EL1
diff --git linux-libre-5.15-gnu/arch/arm64/kernel/cpu_errata.c linux-libre-5.15.126-gnu/arch/arm64/kernel/cpu_errata.c
index e2c20c036442..bf69a20bc27f 100644
--- linux-libre-5.15-gnu/arch/arm64/kernel/cpu_errata.c
+++ linux-libre-5.15.126-gnu/arch/arm64/kernel/cpu_errata.c
@@ -209,6 +209,21 @@ static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
 	{
 		ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
 	},
+	{
+		/* Kryo4xx Gold (rcpe to rfpe) => (r0p0 to r3p0) */
+		ERRATA_MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xe),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2441007
+	{
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2441009
+	{
+		/* Cortex-A510 r0p0 -> r1p1. Fixed in r1p2 */
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1),
+	},
 #endif
 	{},
 };
@@ -340,6 +355,50 @@ static const struct midr_range erratum_1463225[] = {
 };
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+static struct midr_range broken_aarch32_aes[] = {
+	MIDR_RANGE(MIDR_CORTEX_A57, 0, 1, 0xf, 0xf),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_2139208
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2119858
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+#endif
+	{},
+};
+#endif	/* CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE */
+
+#ifdef CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+static const struct midr_range tsb_flush_fail_cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_2067961
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2054223
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+#endif
+	{},
+};
+#endif	/* CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE */
+
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+static struct midr_range trbe_write_out_of_range_cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_2253138
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2224489
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+#endif
+	{},
+};
+#endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -425,7 +484,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 #endif
 #ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
 	{
-		.desc = "Qualcomm erratum 1009, or ARM erratum 1286807",
+		.desc = "Qualcomm erratum 1009, or ARM erratum 1286807, 2441009",
 		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = cpucap_multi_entry_cap_matches,
@@ -464,6 +523,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.matches = has_spectre_v4,
 		.cpu_enable = spectre_v4_enable_mitigation,
 	},
+	{
+		.desc = "Spectre-BHB",
+		.capability = ARM64_SPECTRE_BHB,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = is_spectre_bhb_affected,
+		.cpu_enable = spectre_bhb_enable_mitigation,
+	},
 #ifdef CONFIG_ARM64_ERRATUM_1418040
 	{
 		.desc = "ARM erratum 1418040",
@@ -534,6 +600,52 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		ERRATA_MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL),
 	},
 #endif
+
+#ifdef CONFIG_ARM64_ERRATUM_2457168
+	{
+		.desc = "ARM erratum 2457168",
+		.capability = ARM64_WORKAROUND_2457168,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		/* Cortex-A510 r0p0-r1p1 */
+		CAP_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1)
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+	{
+		.desc = "ARM erratum 1742098",
+		.capability = ARM64_WORKAROUND_1742098,
+		CAP_MIDR_RANGE_LIST(broken_aarch32_aes),
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	{
+		/*
+		 * The erratum work around is handled within the TRBE
+		 * driver and can be applied per-cpu. So, we can allow
+		 * a late CPU to come online with this erratum.
+		 */
+		.desc = "ARM erratum 2119858 or 2139208",
+		.capability = ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		CAP_MIDR_RANGE_LIST(trbe_overwrite_fill_mode_cpus),
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	{
+		.desc = "ARM erratum 2067961 or 2054223",
+		.capability = ARM64_WORKAROUND_TSB_FLUSH_FAILURE,
+		ERRATA_MIDR_RANGE_LIST(tsb_flush_fail_cpus),
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	{
+		.desc = "ARM erratum 2253138 or 2224489",
+		.capability = ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus),
+	},
+#endif
 	{
 	}
 };
diff --git linux-libre-5.15-gnu/arch/arm64/kernel/cpufeature.c linux-libre-5.15.126-gnu/arch/arm64/kernel/cpufeature.c
index 6ec7036ef7e1..d4ee345ff429 100644
--- linux-libre-5.15-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-5.15.126-gnu/arch/arm64/kernel/cpufeature.c
@@ -73,10 +73,13 @@
 #include <linux/mm.h>
 #include <linux/cpu.h>
 #include <linux/kasan.h>
+#include <linux/percpu.h>
+
 #include <asm/cpu.h>
 #include <asm/cpufeature.h>
 #include <asm/cpu_ops.h>
 #include <asm/fpsimd.h>
+#include <asm/hwcap.h>
 #include <asm/insn.h>
 #include <asm/kvm_host.h>
 #include <asm/mmu_context.h>
@@ -85,6 +88,7 @@
 #include <asm/smp.h>
 #include <asm/sysreg.h>
 #include <asm/traps.h>
+#include <asm/vectors.h>
 #include <asm/virt.h>
 
 /* Kernel representation of AT_HWCAP and AT_HWCAP2 */
@@ -110,6 +114,8 @@ DECLARE_BITMAP(boot_capabilities, ARM64_NPATCHABLE);
 bool arm64_use_ng_mappings = false;
 EXPORT_SYMBOL(arm64_use_ng_mappings);
 
+DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors;
+
 /*
  * Permit PER_LINUX32 and execve() of 32-bit binaries even if not all CPUs
  * support it?
@@ -225,6 +231,12 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
 	ARM64_FTR_END,
 };
 
+static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64ISAR2_CLEARBHB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_RPRES_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV3_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV2_SHIFT, 4, 0),
@@ -279,7 +291,7 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_ECV_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_ECV_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_FGT_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EXS_SHIFT, 4, 0),
 	/*
@@ -325,6 +337,7 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_AFP_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_ETS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_TWED_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_XNX_SHIFT, 4, 0),
@@ -524,7 +537,7 @@ static const struct arm64_ftr_bits ftr_id_pfr2[] = {
 
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
 	/* [31:28] TraceFilt */
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_PERFMON_SHIFT, 4, 0xf),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_DFR0_PERFMON_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MPROFDBG_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPTRC_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPTRC_SHIFT, 4, 0),
@@ -573,15 +586,19 @@ static const struct arm64_ftr_bits ftr_raz[] = {
 	ARM64_FTR_END,
 };
 
-#define ARM64_FTR_REG_OVERRIDE(id, table, ovr) {		\
+#define __ARM64_FTR_REG_OVERRIDE(id_str, id, table, ovr) {	\
 		.sys_id = id,					\
 		.reg = 	&(struct arm64_ftr_reg){		\
-			.name = #id,				\
+			.name = id_str,				\
 			.override = (ovr),			\
 			.ftr_bits = &((table)[0]),		\
 	}}
 
-#define ARM64_FTR_REG(id, table) ARM64_FTR_REG_OVERRIDE(id, table, &no_override)
+#define ARM64_FTR_REG_OVERRIDE(id, table, ovr)	\
+	__ARM64_FTR_REG_OVERRIDE(#id, id, table, ovr)
+
+#define ARM64_FTR_REG(id, table)		\
+	__ARM64_FTR_REG_OVERRIDE(#id, id, table, &no_override)
 
 struct arm64_ftr_override __ro_after_init id_aa64mmfr1_override;
 struct arm64_ftr_override __ro_after_init id_aa64pfr1_override;
@@ -633,6 +650,7 @@ static const struct __ftr_reg_entry {
 	ARM64_FTR_REG(SYS_ID_AA64ISAR0_EL1, ftr_id_aa64isar0),
 	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ISAR1_EL1, ftr_id_aa64isar1,
 			       &id_aa64isar1_override),
+	ARM64_FTR_REG(SYS_ID_AA64ISAR2_EL1, ftr_id_aa64isar2),
 
 	/* Op1 = 0, CRn = 0, CRm = 7 */
 	ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0),
@@ -929,6 +947,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 	init_cpu_ftr_reg(SYS_ID_AA64DFR1_EL1, info->reg_id_aa64dfr1);
 	init_cpu_ftr_reg(SYS_ID_AA64ISAR0_EL1, info->reg_id_aa64isar0);
 	init_cpu_ftr_reg(SYS_ID_AA64ISAR1_EL1, info->reg_id_aa64isar1);
+	init_cpu_ftr_reg(SYS_ID_AA64ISAR2_EL1, info->reg_id_aa64isar2);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR0_EL1, info->reg_id_aa64mmfr0);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR1_EL1, info->reg_id_aa64mmfr1);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
@@ -1147,6 +1166,8 @@ void update_cpu_features(int cpu,
 				      info->reg_id_aa64isar0, boot->reg_id_aa64isar0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR1_EL1, cpu,
 				      info->reg_id_aa64isar1, boot->reg_id_aa64isar1);
+	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR2_EL1, cpu,
+				      info->reg_id_aa64isar2, boot->reg_id_aa64isar2);
 
 	/*
 	 * Differing PARange support is fine as long as all peripherals and
@@ -1268,6 +1289,7 @@ u64 __read_sysreg_by_encoding(u32 sys_id)
 	read_sysreg_case(SYS_ID_AA64MMFR2_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR0_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR1_EL1);
+	read_sysreg_case(SYS_ID_AA64ISAR2_EL1);
 
 	read_sysreg_case(SYS_CNTFRQ_EL0);
 	read_sysreg_case(SYS_CTR_EL0);
@@ -1575,6 +15