diff --git linux-libre-5.15-gnu/.gitignore linux-libre-5.15.187-gnu/.gitignore
index 7afd412dadd2..0e5f33db0216 100644
--- linux-libre-5.15-gnu/.gitignore
+++ linux-libre-5.15.187-gnu/.gitignore
@@ -129,7 +129,6 @@ GTAGS
 # id-utils files
 ID
 
-*.orig
 *~
 \#*#
 
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-5.15.187-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 889ed45be4ca..2d5a5913b5f2 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -51,7 +51,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-ata linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..299e0d1dc161 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-ata
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-iio
index 6ad47a67521c..f41e767e702b 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-iio
@@ -188,7 +188,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610 linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b6..af31e5a22d89 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-pci
index d4ae03296861..41a60df789e3 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -148,6 +148,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..e9ef69aef20b 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f30406..1e7e0bb4c14e 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 978b76358661..40d5aab8452d 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible vaules depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index b46ef147616a..0301ac606cdd 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -511,15 +511,21 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpu#.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/retbleed
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index ec3a7149ced5..2e2e0b992233 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -655,7 +655,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ac2947b98950..3d5de44cbbee 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -42,5 +42,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created backends.
+                that this option only takes effect on newly connected backends.
                 The default is Y (enable).
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index 28008905615f..1f7659aa085c 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -15,5 +15,5 @@ KernelVersion:  5.10
 Contact:        SeongJae Park <sjpark@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created frontends.
+                that this option only takes effect on newly connected frontends.
                 The default is Y (enable).
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index f627e705e663..89dec1f3ea6d 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -55,8 +55,9 @@ Description:	Controls the in-place-update policy.
 		0x04  F2FS_IPU_UTIL
 		0x08  F2FS_IPU_SSR_UTIL
 		0x10  F2FS_IPU_FSYNC
-		0x20  F2FS_IPU_ASYNC,
+		0x20  F2FS_IPU_ASYNC
 		0x40  F2FS_IPU_NOCACHE
+		0x80  F2FS_IPU_HONOR_OPU_WRITE
 		====  =================
 
 		Refer segment.h for details.
@@ -425,6 +426,7 @@ Description:	Show status of f2fs superblock in real time.
 		0x800  SBI_QUOTA_SKIP_FLUSH  skip flushing quota in current CP
 		0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
 		0x2000 SBI_IS_RESIZEFS       resizefs is in process
+		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 04885738cf15..0f8f0772d6f3 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ linux-libre-5.15.187-gnu/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -57,3 +57,12 @@ Description:
 			* 0 - default,
 			* 1 - overboost,
 			* 2 - silent
+
+What:		/sys/devices/platform/<platform>/dgpu_disable
+Date:		Aug 2022
+KernelVersion:	5.17
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Disable discrete GPU:
+			* 0 - Enable dGPU,
+			* 1 - Disable dGPU
diff --git linux-libre-5.15-gnu/Documentation/accounting/psi.rst linux-libre-5.15.187-gnu/Documentation/accounting/psi.rst
index f2b3439edcc2..5e40b3f437f9 100644
--- linux-libre-5.15-gnu/Documentation/accounting/psi.rst
+++ linux-libre-5.15.187-gnu/Documentation/accounting/psi.rst
@@ -37,11 +37,7 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such::
-
-	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-
-and for memory and IO::
+The format is as such::
 
 	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
@@ -58,6 +54,9 @@ situation from a state where some tasks are stalled but the CPU is
 still doing productive work. As such, time spent in this subset of the
 stall state is tracked separately and exported in the "full" averages.
 
+CPU full is undefined at the system level, but has been reported
+since 5.13, so it is set to zero for backward compatibility.
+
 The ratios (in %) are tracked as recent trends over ten, sixty, and
 three hundred second windows, which gives insight into short term events
 as well as medium and long term trends. The total absolute stall time
@@ -92,7 +91,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
index 41191b5fb69d..dd913eefbf31 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -84,6 +84,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -723,8 +725,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/cifs/usage.rst
index f170d8820258..3766bf8a1c20 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -734,10 +734,9 @@ SecurityFlags		Flags which control security negotiation and
 			using weaker password hashes is 0x37037 (lanman,
 			plaintext, ntlm, ntlmv2, signing allowed).  Some
 			SecurityFlags require the corresponding menuconfig
-			options to be enabled (lanman and plaintext require
-			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
-			plaintext authentication currently requires also
-			enabling lanman authentication in the security flags
+			options to be enabled.  Enabling plaintext
+			authentication currently requires also enabling
+			lanman authentication in the security flags
 			because the cifs module only supports sending
 			laintext passwords using the older lanman dialect
 			form of the session setup SMB.  (e.g. for authentication
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/dm-init.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
index e5242ff17e9b..981d6a907699 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
@@ -123,3 +123,11 @@ Other examples (per target):
     0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
     fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
     51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
+
+For setups using device-mapper on top of asynchronously probed block
+devices (MMC, USB, ..), it may be necessary to tell dm-init to
+explicitly wait for them to become available before setting up the
+device-mapper tables. This can be done with the "dm-mod.waitfor="
+module parameter, which takes a list of devices to wait for::
+
+  dm-mod.waitfor=<device1>[,..,<deviceN>]
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/writecache.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/device-mapper/writecache.rst
index 10429779a91a..724e028d1858 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/device-mapper/writecache.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/device-mapper/writecache.rst
@@ -78,16 +78,16 @@ Status:
 2. the number of blocks
 3. the number of free blocks
 4. the number of blocks under writeback
-5. the number of read requests
-6. the number of read requests that hit the cache
-7. the number of write requests
-8. the number of write requests that hit uncommitted block
-9. the number of write requests that hit committed block
-10. the number of write requests that bypass the cache
-11. the number of write requests that are allocated in the cache
+5. the number of read blocks
+6. the number of read blocks that hit the cache
+7. the number of write blocks
+8. the number of write blocks that hit uncommitted block
+9. the number of write blocks that hit committed block
+10. the number of write blocks that bypass the cache
+11. the number of write blocks that are allocated in the cache
 12. the number of write requests that are blocked on the freelist
 13. the number of flush requests
-14. the number of discard requests
+14. the number of discarded blocks
 
 Messages:
 	flush
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/devices.txt linux-libre-5.15.187-gnu/Documentation/admin-guide/devices.txt
index 922c23bb4372..c07dc0ee860e 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/devices.txt
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/devices.txt
@@ -2339,13 +2339,7 @@
 		disks (see major number 3) except that the limit on
 		partitions is 31.
 
- 162 char	Raw block device interface
-		  0 = /dev/rawctl	Raw I/O control device
-		  1 = /dev/raw/raw1	First raw I/O device
-		  2 = /dev/raw/raw2	Second raw I/O device
-		    ...
-		 max minor number of raw device is set by kernel config
-		 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
+ 162 char	Used for (now removed) raw block device interface
 
  163 char
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/filesystem-monitoring.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/filesystem-monitoring.rst
new file mode 100644
index 000000000000..ab8dba76283c
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/filesystem-monitoring.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================
+File system Monitoring with fanotify
+====================================
+
+File system Error Reporting
+===========================
+
+Fanotify supports the FAN_FS_ERROR event type for file system-wide error
+reporting.  It is meant to be used by file system health monitoring
+daemons, which listen for these events and take actions (notify
+sysadmin, start recovery) when a file system problem is detected.
+
+By design, a FAN_FS_ERROR notification exposes sufficient information
+for a monitoring tool to know a problem in the file system has happened.
+It doesn't necessarily provide a user space application with semantics
+to verify an IO operation was successfully executed.  That is out of
+scope for this feature.  Instead, it is only meant as a framework for
+early file system problem detection and reporting recovery tools.
+
+When a file system operation fails, it is common for dozens of kernel
+errors to cascade after the initial failure, hiding the original failure
+log, which is usually the most useful debug data to troubleshoot the
+problem.  For this reason, FAN_FS_ERROR tries to report only the first
+error that occurred for a file system since the last notification, and
+it simply counts additional errors.  This ensures that the most
+important pieces of information are never lost.
+
+FAN_FS_ERROR requires the fanotify group to be setup with the
+FAN_REPORT_FID flag.
+
+At the time of this writing, the only file system that emits FAN_FS_ERROR
+notifications is Ext4.
+
+A FAN_FS_ERROR Notification has the following format::
+
+  ::
+
+     [ Notification Metadata (Mandatory) ]
+     [ Generic Error Record  (Mandatory) ]
+     [ FID record            (Mandatory) ]
+
+The order of records is not guaranteed, and new records might be added
+in the future.  Therefore, applications must not rely on the order and
+must be prepared to skip over unknown records. Please refer to
+``samples/fanotify/fs-monitor.c`` for an example parser.
+
+Generic error record
+--------------------
+
+The generic error record provides enough information for a file system
+agnostic tool to learn about a problem in the file system, without
+providing any additional details about the problem.  This record is
+identified by ``struct fanotify_event_info_header.info_type`` being set
+to FAN_EVENT_INFO_TYPE_ERROR.
+
+  ::
+
+     struct fanotify_event_info_error {
+          struct fanotify_event_info_header hdr;
+         __s32 error;
+         __u32 error_count;
+     };
+
+The `error` field identifies the type of error using errno values.
+`error_count` tracks the number of errors that occurred and were
+suppressed to preserve the original error information, since the last
+notification.
+
+FID record
+----------
+
+The FID record can be used to uniquely identify the inode that triggered
+the error through the combination of fsid and file handle.  A file system
+specific application can use that information to attempt a recovery
+procedure.  Errors that are not related to an inode are reported with an
+empty file handle of type FILEID_INVALID.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index 0febe458597c..b9ab02325e8b 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -66,8 +66,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
new file mode 100644
index 000000000000..ec6e9f5bcf9e
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
@@ -0,0 +1,92 @@
+
+.. SPDX-License-Identifier: GPL-2.0
+
+Cross-Thread Return Address Predictions
+=======================================
+
+Certain AMD and Hygon processors are subject to a cross-thread return address
+predictions vulnerability. When running in SMT mode and one sibling thread
+transitions out of C0 state, the other sibling thread could use return target
+predictions from the sibling thread that transitioned out of C0.
+
+The Spectre v2 mitigations protect the Linux kernel, as it fills the return
+address prediction entries with safe targets when context switching to the idle
+thread. However, KVM does allow a VMM to prevent exiting guest mode when
+transitioning out of C0. This could result in a guest-controlled return target
+being consumed by the sibling thread.
+
+Affected processors
+-------------------
+
+The following CPUs are vulnerable:
+
+    - AMD Family 17h processors
+    - Hygon Family 18h processors
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =======================================
+   CVE-2022-27672  Cross-Thread Return Address Predictions
+   ==============  =======================================
+
+Problem
+-------
+
+Affected SMT-capable processors support 1T and 2T modes of execution when SMT
+is enabled. In 2T mode, both threads in a core are executing code. For the
+processor core to enter 1T mode, it is required that one of the threads
+requests to transition out of the C0 state. This can be communicated with the
+HLT instruction or with an MWAIT instruction that requests non-C0.
+When the thread re-enters the C0 state, the processor transitions back
+to 2T mode, assuming the other thread is also still in C0 state.
+
+In affected processors, the return address predictor (RAP) is partitioned
+depending on the SMT mode. For instance, in 2T mode each thread uses a private
+16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon
+transition between 1T/2T mode, the RAP contents are not modified but the RAP
+pointers (which control the next return target to use for predictions) may
+change. This behavior may result in return targets from one SMT thread being
+used by RET predictions in the sibling thread following a 1T/2T switch. In
+particular, a RET instruction executed immediately after a transition to 1T may
+use a return target from the thread that just became idle. In theory, this
+could lead to information disclosure if the return targets used do not come
+from trustworthy code.
+
+Attack scenarios
+----------------
+
+An attack can be mounted on affected processors by performing a series of CALL
+instructions with targeted return locations and then transitioning out of C0
+state.
+
+Mitigation mechanism
+--------------------
+
+Before entering idle state, the kernel context switches to the idle thread. The
+context switch fills the RAP entries (referred to as the RSB in Linux) with safe
+targets by performing a sequence of CALL instructions.
+
+Prevent a guest VM from directly putting the processor into an idle state by
+intercepting HLT and MWAIT instructions.
+
+Both mitigations are required to fully address this issue.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Use existing Spectre v2 mitigations that will fill the RSB on context switch.
+
+Mitigation control for KVM - module parameter
+---------------------------------------------
+
+By default, the KVM hypervisor mitigates this issue by intercepting guest
+attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS
+capability to override those interceptions, but since this is not common, the
+mitigation that covers this path is not enabled by default.
+
+The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on
+using the boolean module parameter mitigate_smt_rsb, e.g.:
+        kvm.mitigate_smt_rsb=1
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/index.rst
index 8cbc711cda93..dc69ba0b05e4 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -17,3 +17,9 @@ are configurable at compile, boot or run time.
    special-register-buffer-data-sampling.rst
    core-scheduling.rst
    l1d_flush.rst
+   processor_mmio_stale_data.rst
+   cross-thread-rsb.rst
+   gather_data_sampling.rst
+   srso
+   reg-file-data-sampling
+   indirect-target-selection
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 000000000000..dd9bda1e5db2
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,154 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..e916dc232b0f
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,258 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+	 Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+	 data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+	 Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+	 Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+	 values as part of MD_CLEAR operations. Processors that do not
+	 enumerate MDS_NO (meaning they are affected by MDS) but that do
+	 enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+	 FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+	 IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+	 bit can be set to cause the VERW instruction to not perform the
+	 FB_CLEAR action. Not all processors that support FB_CLEAR will support
+	 FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities  have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+  ==========  =================================================================
+  full        If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and when entering a VM. Idle transitions are
+              protected as well. It does not automatically disable SMT.
+  full,nosmt  Same as full, with SMT disabled on vulnerable CPUs. This is the
+              complete mitigation.
+  off         Disables mitigation completely.
+  ==========  =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable, but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+     * - 'Unknown: No mitigations'
+       - The processor vulnerability status is unknown because it is
+	 out of Servicing period. Mitigation is not attempted.
+
+Definitions:
+------------
+
+Servicing period: The process of providing functional and security updates to
+Intel processors or platforms, utilizing the Intel Platform Update (IPU)
+process or other similar mechanisms.
+
+End of Servicing Updates (ESU): ESU is the date at which Intel will no
+longer provide Servicing, such as through IPU or other similar update
+processes. ESU dates will typically be aligned to end of quarter.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+  ========================  ===========================================
+  'SMT vulnerable'          SMT is enabled
+  'SMT disabled'            SMT is disabled
+  'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+  ========================  ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..810424b4b7f6
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ALDERLAKE_N             06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..b038410eccb6 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,18 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
+
 Attack scenarios
 ----------------
 
@@ -364,13 +376,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -407,6 +421,31 @@ The possible values in this file are:
   'RSB filling'   Protection of RSB on context switch enabled
   =============   ===========================================
 
+  - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status:
+
+  ===========================  =======================================================
+  'PBRSB-eIBRS: SW sequence'   CPU is affected and protection of RSB on VMEXIT enabled
+  'PBRSB-eIBRS: Vulnerable'    CPU is vulnerable
+  'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
+  ===========================  =======================================================
+
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -456,8 +495,23 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
+
+   On Intel's enhanced IBRS systems, this includes cross-thread branch target
+   injections on SMT systems (STIBP). In other words, Intel eIBRS enables
+   STIBP, too.
+
+   AMD Automatic IBRS does not protect userspace, and Legacy IBRS systems clear
+   the IBRS bit on exit to userspace, therefore both explicitly enable STIBP.
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -468,7 +522,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -481,9 +535,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
@@ -584,12 +641,14 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   Enhanced/Auto IBRS
+                eibrs,retpoline         Enhanced/Auto IBRS + Retpolines
+                eibrs,lfence            Enhanced/Auto IBRS + LFENCE
+                ibrs                    use IBRS to protect kernel
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -649,6 +708,20 @@ For user space mitigation:
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
+For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
+
 Mitigation selection guide
 --------------------------
 
@@ -730,7 +803,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/srso.rst
new file mode 100644
index 000000000000..f79cb11b080f
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Speculative Return Stack Overflow (SRSO)
+========================================
+
+This is a mitigation for the speculative return stack overflow (SRSO)
+vulnerability found on AMD processors. The mechanism is by now the well
+known scenario of poisoning CPU functional units - the Branch Target
+Buffer (BTB) and Return Address Predictor (RAP) in this case - and then
+tricking the elevated privilege domain (the kernel) into leaking
+sensitive data.
+
+AMD CPUs predict RET instructions using a Return Address Predictor (aka
+Return Address Stack/Return Stack Buffer). In some cases, a non-architectural
+CALL instruction (i.e., an instruction predicted to be a CALL but is
+not actually a CALL) can create an entry in the RAP which may be used
+to predict the target of a subsequent RET instruction.
+
+The specific circumstances that lead to this varies by microarchitecture
+but the concern is that an attacker can mis-train the CPU BTB to predict
+non-architectural CALL instructions in kernel space and use this to
+control the speculative target of a subsequent kernel RET, potentially
+leading to information disclosure via a speculative side-channel.
+
+The issue is tracked under CVE-2023-20569.
+
+Affected processors
+-------------------
+
+AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older
+processors have not been investigated.
+
+System information and options
+------------------------------
+
+First of all, it is required that the latest microcode be loaded for
+mitigations to be effective.
+
+The sysfs file showing SRSO mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
+
+The possible values in this file are:
+
+ - 'Not affected'               The processor is not vulnerable
+
+ - 'Vulnerable: no microcode'   The processor is vulnerable, no
+                                microcode extending IBPB functionality
+                                to address the vulnerability has been
+                                applied.
+
+ - 'Mitigation: microcode'      Extended IBPB functionality microcode
+                                patch has been applied. It does not
+                                address User->Kernel and Guest->Host
+                                transitions protection but it does
+                                address User->User and VM->VM attack
+                                vectors.
+
+                                (spec_rstack_overflow=microcode)
+
+ - 'Mitigation: safe RET'       Software-only mitigation. It complements
+                                the extended IBPB microcode patch
+                                functionality by addressing User->Kernel
+                                and Guest->Host transitions protection.
+
+                                Selected by default or by
+                                spec_rstack_overflow=safe-ret
+
+ - 'Mitigation: IBPB'           Similar protection as "safe RET" above
+                                but employs an IBPB barrier on privilege
+                                domain crossings (User->Kernel,
+                                Guest->Host).
+
+                                (spec_rstack_overflow=ibpb)
+
+ - 'Mitigation: IBPB on VMEXIT' Mitigation addressing the cloud provider
+                                scenario - the Guest->Host transitions
+                                only.
+
+                                (spec_rstack_overflow=ibpb-vmexit)
+
+In order to exploit vulnerability, an attacker needs to:
+
+ - gain local access on the machine
+
+ - break kASLR
+
+ - find gadgets in the running kernel in order to use them in the exploit
+
+ - potentially create and pin an additional workload on the sibling
+   thread, depending on the microarchitecture (not necessary on fam 0x19)
+
+ - run the exploit
+
+Considering the performance implications of each mitigation type, the
+default one is 'Mitigation: safe RET' which should take care of most
+attack vectors, including the local User->Kernel one.
+
+As always, the user is advised to keep her/his system up-to-date by
+applying software updates regularly.
+
+The default setting will be reevaluated when needed and especially when
+new attack vectors appear.
+
+As one can surmise, 'Mitigation: safe RET' does come at the cost of some
+performance depending on the workload. If one trusts her/his userspace
+and does not want to suffer the performance impact, one can always
+disable the mitigation with spec_rstack_overflow=off.
+
+Similarly, 'Mitigation: IBPB' is another full mitigation type employing
+an indrect branch prediction barrier after having applied the required
+microcode patch for one's system. This mitigation comes also at
+a performance cost.
+
+Mitigation: safe RET
+--------------------
+
+The mitigation works by ensuring all RET instructions speculate to
+a controlled location, similar to how speculation is controlled in the
+retpoline sequence.  To accomplish this, the __x86_return_thunk forces
+the CPU to mispredict every function return using a 'safe return'
+sequence.
+
+To ensure the safety of this mitigation, the kernel must ensure that the
+safe return sequence is itself free from attacker interference.  In Zen3
+and Zen4, this is accomplished by creating a BTB alias between the
+untraining function srso_alias_untrain_ret() and the safe return
+function srso_alias_safe_ret() which results in evicting a potentially
+poisoned BTB entry and using that safe one for all function returns.
+
+In older Zen1 and Zen2, this is accomplished using a reinterpretation
+technique similar to Retbleed one: srso_untrain_ret() and
+srso_safe_ret().
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/index.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/index.rst
index dc00afcabb95..1bedab498104 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/index.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/index.rst
@@ -82,6 +82,7 @@ configure specific aspects of kernel behavior to your liking.
    edid
    efi-stub
    ext4
+   filesystem-monitoring
    nfs/index
    gpio/index
    highuid
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-5.15.187-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.15.187-gnu/Documentation/admin-guide/kernel-parameters.txt
index 43dc35fe5bc0..f12ba5c12b91 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -600,12 +600,6 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to three retries, that is,
-			four attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -916,10 +910,6 @@
 
 	debugpat	[X86] Enable PAT debugging
 
-	decnet.addr=	[HW,NET]
-			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.rst.
-
 	default_hugepagesz=
 			[HW] The size of the default HugeTLB page. This is
 			the size represented by the legacy /proc/ hugepages
@@ -1041,6 +1031,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously.
 			Format: <driver_name1>,<driver_name2>...
@@ -1088,8 +1098,12 @@
 	nopku		[X86] Disable Memory Protection Keys CPU feature found
 			in some Intel CPUs.
 
-	<module>.async_probe [KNL]
-			Enable asynchronous probe on this module.
+	<module>.async_probe[=<bool>] [KNL]
+			If no <bool> value is specified or if the value
+			specified is not a valid <bool>, enable asynchronous
+			probe on this module.  Otherwise, enable/disable
+			asynchronous probe on this module as indicated by the
+			<bool> value. See also: module.async_probe
 
 	early_ioremap_debug [KNL]
 			Enable debug messages in early_ioremap support. This
@@ -1505,6 +1519,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:    Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -1690,6 +1724,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -1890,6 +1926,20 @@
 			different crypto accelerators. This option can be used
 			to achieve best performance for particular HW.
 
+	indirect_target_selection= [X86,Intel] Mitigation control for Indirect
+			Target Selection(ITS) bug in Intel CPUs. Updated
+			microcode is also required for a fix in IBPB.
+
+			on:     Enable mitigation (default).
+			off:    Disable mitigation.
+			force:	Force the ITS bug and deploy default
+				mitigation.
+			vmexit: Only deploy mitigation if CPU is affected by
+				guest/host isolation part of ITS.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -2198,24 +2248,57 @@
 
 	ivrs_ioapic	[HW,X86-64]
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map IOAPIC-ID decimal 10 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
+			* To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_hpet	[HW,X86-64]
 			Provide an override to the HPET-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map HPET-ID decimal 0 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map HPET-ID decimal 0 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
+			* To map HPET-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map UART-HID:UID AMD0020:0 to
-			PCI device 00:14.5 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map UART-HID:UID AMD0020:0 to
+			PCI segment 0x1 and PCI device ID 00:14.5,
+			write the parameter as:
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
+
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
@@ -2403,8 +2486,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -2999,20 +3086,27 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
+				Equivalent to: gather_data_sampling=off [X86]
+					       indirect_target_selection=off [X86]
 					       kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
+					       kvm.nx_huge_pages=off [X86]
+					       l1tf=off [X86]
+					       mds=off [X86]
+					       mmio_stale_data=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
+					       reg_file_data_sampling=off [X86]
+					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
+					       spectre_v2_user=off [X86]
 					       ssbd=force-off [ARM64]
-					       l1tf=off [X86]
-					       mds=off [X86]
+					       nospectre_bhb [ARM64]
 					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
-					       no_entry_flush [PPC]
-					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3034,6 +3128,8 @@
 				Equivalent to: l1tf=flush,nosmt [X86]
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
+					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -3043,6 +3139,49 @@
 			log everything. Information is printed at KERN_DEBUG
 			so loglevel=8 may also need to be specified.
 
+	mmio_stale_data=
+			[X86,INTEL] Control mitigation for the Processor
+			MMIO Stale Data vulnerabilities.
+
+			Processor MMIO Stale Data is a class of
+			vulnerabilities that may expose data after an MMIO
+			operation. Exposed data could originate or end in
+			the same CPU buffers as affected by MDS and TAA.
+			Therefore, similar to MDS and TAA, the mitigation
+			is to clear the affected CPU buffers.
+
+			This parameter controls the mitigation. The
+			options are:
+
+			full       - Enable mitigation on vulnerable CPUs
+
+			full,nosmt - Enable mitigation and disable SMT on
+				     vulnerable CPUs.
+
+			off        - Unconditionally disable mitigation
+
+			On MDS or TAA affected machines,
+			mmio_stale_data=off can be prevented by an active
+			MDS or TAA mitigation as these vulnerabilities are
+			mitigated with the same mechanism so in order to
+			disable this mitigation, you need to specify
+			mds=off and tsx_async_abort=off too.
+
+			Not specifying this option is equivalent to
+			mmio_stale_data=full.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
+	module.async_probe=<bool>
+			[KNL] When set to true, modules will use async probing
+			by default. To enable/disable async probing for a
+			specific module, use the module specific control that
+			is documented under <module>.async_probe. When both
+			module.async_probe and <module>.async_probe are
+			specified, <module>.async_probe takes precedence for
+			the specific module.
+
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.
@@ -3328,9 +3467,6 @@
 
 	noautogroup	Disable scheduler automatic task group creation.
 
-	nobats		[PPC] Do not use BATs for mapping kernel lowmem
-			on "Classic" PPC cores.
-
 	nocache		[ARM]
 
 	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
@@ -3391,6 +3527,10 @@
 			vulnerability. System may allow data leaks with this
 			option.
 
+	nospectre_bhb	[ARM64] Disable all mitigations for Spectre-BHB (branch
+			history injection) vulnerability. System may allow data leaks
+			with this option.
+
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
@@ -3446,8 +3586,7 @@
 			difficult since unequal pointers can no longer be
 			compared.  However, if this command-line option is
 			specified, then all normal pointers will have their true
-			value printed.  Pointers printed via %pK may still be
-			hashed.  This option should only be specified when
+			value printed. This option should only be specified when
 			debugging the kernel.  Please do not use on production
 			kernels.
 
@@ -3507,9 +3646,6 @@
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
 
-	noltlbs		[PPC] Do not use large page/tlb entries for kernel
-			lowmem mapping on PPC40x and PPC8xx
-
 	nomca		[IA-64] Disable machine check abort handling
 
 	nomce		[X86-32] Disable Machine Check Exception
@@ -4217,6 +4353,16 @@
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	proc_mem.force_override= [KNL]
+			Format: {always | ptrace | never}
+			Traditionally /proc/pid/mem allows memory permissions to be
+			overridden without restrictions. This option may be set to
+			restrict that. Can be one of:
+			- 'always': traditional behavior always allows mem overrides.
+			- 'ptrace': only allow mem overrides for active ptracers.
+			- 'never':  never allow mem overrides.
+			If not specified, default is the CONFIG_PROC_MEM_* choice.
+
 	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
@@ -4227,11 +4373,9 @@
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [<profiletype>,]<number>
-			Param: <profiletype>: "schedule", "sleep", or "kvm"
+			Param: <profiletype>: "schedule" or "kvm"
 				[defaults to kernel profiling]
 			Param: "schedule" - profile schedule points.
-			Param: "sleep" - profile D-state sleeping (millisecs).
-				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
@@ -4302,6 +4446,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	randomize_kstack_offset=
 			[KNL] Enable or disable kernel stack offset
 			randomization, which provides roughly 5 bits of
@@ -4921,6 +5071,43 @@
 
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
+	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
+			Speculative Code Execution with Return Instructions)
+			vulnerability.
+
+			AMD-based UNRET and IBPB mitigations alone do not stop
+			sibling threads from influencing the predictions of other
+			sibling threads. For that reason, STIBP is used on pro-
+			cessors that support it, and mitigate SMT on processors
+			that don't.
+
+			off          - no mitigation
+			auto         - automatically select a migitation
+			auto,nosmt   - automatically select a mitigation,
+				       disabling SMT if necessary for
+				       the full mitigation (only on Zen1
+				       and older without STIBP).
+			ibpb         - On AMD, mitigate short speculation
+				       windows on basic block boundaries too.
+				       Safe, highest perf impact. It also
+				       enables STIBP if present. Not suitable
+				       on Intel.
+			ibpb,nosmt   - Like "ibpb" above but will disable SMT
+				       when STIBP is not available. This is
+				       the alternative for systems which do not
+				       have STIBP.
+			unret        - Force enable untrained return thunks,
+				       only effective on AMD f15h-f17h based
+				       systems.
+			unret,nosmt  - Like unret, but will disable SMT when STIBP
+				       is not available. This is the alternative for
+				       systems which do not have STIBP.
+
+			Selecting 'auto' will choose a mitigation method at run
+			time according to the CPU.
+
+			Not specifying this option is equivalent to retbleed=auto.
+
 	rfkill.default_state=
 		0	"airplane mode".  All wifi, bluetooth, wimax, gps, fm,
 			etc. communication is blocked by default.
@@ -5234,6 +5421,15 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/admin-guide/laptops/sonypi.rst
 
+	spectre_bhi=	[X86] Control mitigation of Branch History Injection
+			(BHI) vulnerability.  This setting affects the
+			deployment of the HW BHI control and the SW BHB
+			clearing sequence.
+
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
 			The default operation protects the kernel from
@@ -5261,8 +5457,13 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - Enhanced/Auto IBRS
+			eibrs,retpoline   - Enhanced/Auto IBRS + Retpolines
+			eibrs,lfence      - Enhanced/Auto IBRS + LFENCE
+			ibrs		  - use IBRS to protect kernel
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -5309,6 +5510,17 @@
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
 
+	spec_rstack_overflow=
+			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+
+			off		- Disable mitigation
+			microcode	- Enable microcode mitigation only
+			safe-ret	- Enable sw-only safe RET mitigation (default)
+			ibpb		- Enable mitigation by issuing IBPB on
+					  kernel entry
+			ibpb-vmexit	- Issue IBPB only on VMEXIT
+					  (cloud-specific mitigation)
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@@ -5618,10 +5830,6 @@
 			-1: disable all critical trip points in all thermal zones
 			<degrees C>: override all critical trip points
 
-	thermal.nocrt=	[HW,ACPI]
-			Set to disable actions on ACPI thermal zone
-			critical and hot trip points.
-
 	thermal.off=	[HW,ACPI]
 			1: disable ACPI thermal control
 
@@ -5772,6 +5980,29 @@
 			first trust source as a backend which is initialized
 			successfully during iteration.
 
+	trusted.rng=	[KEYS]
+			Format: <string>
+			The RNG used to generate key material for trusted keys.
+			Can be one of:
+			- "kernel"
+			- the same value as trusted.source: "tpm" or "tee"
+			- "default"
+			If not specified, "default" is used. In this case,
+			the RNG's choice is left to each individual trust source.
+
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -6349,6 +6580,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/mm/pagemap.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/mm/pagemap.rst
index fb578fbbb76c..49857ce1cd03 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/mm/pagemap.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/mm/pagemap.rst
@@ -23,7 +23,7 @@ There are four components to pagemap:
     * Bit  56    page exclusively mapped (since 4.2)
     * Bit  57    pte is uffd-wp write-protected (since 5.13) (see
       :ref:`Documentation/admin-guide/mm/userfaultfd.rst <userfaultfd>`)
-    * Bits 57-60 zero
+    * Bits 58-60 zero
     * Bit  61    page is file-page or shared-anon (since 3.5)
     * Bit  62    page swapped
     * Bit  63    page present
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/pm/cpuidle.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/pm/cpuidle.rst
index aec2cd2aaea7..19754beb5a4e 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/pm/cpuidle.rst
@@ -612,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
 by default this way, for example.
 
 The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
 
 The *x86* architecture support code recognizes three kernel command line
 options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
@@ -635,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as
 energy-efficiency.  Thus using it for performance reasons may not be a good idea
 at all.]
 
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
 
 In addition to the architecture-level kernel command line options affecting CPU
 idle time management, there are parameters affecting individual ``CPUIdle``
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/security-bugs.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/security-bugs.rst
index 82e29837d589..5a6993795bd2 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/security-bugs.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/security-bugs.rst
@@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 426162009ce9..48b91c485c99 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -671,6 +671,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -795,6 +804,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1013,28 +1023,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space
@@ -1099,7 +1103,7 @@ task_delayacct
 ===============
 
 Enables/disables task delay accounting (see
-:doc:`accounting/delay-accounting.rst`). Enabling this feature incurs
+Documentation/accounting/delay-accounting.rst. Enabling this feature incurs
 a small amount of overhead in the scheduler but is useful for debugging
 and performance tuning. It is required by some tools such as iotop.
 
@@ -1490,6 +1494,16 @@ entry will default to 2 instead of 0.
 2 Unprivileged calls to ``bpf()`` are disabled
 = =============================================================
 
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog
 ========
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/sysctl/net.rst
index 4150f74c521a..aad6db9c1c83 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -31,17 +31,18 @@ see only some of them, depending on your kernel's configuration.
 
 Table : Subdirectories in /proc/sys/net
 
- ========= =================== = ========== ==================
+ ========= =================== = ========== ===================
  Directory Content               Directory  Content
- ========= =================== = ========== ==================
- core      General parameter     appletalk  Appletalk protocol
- unix      Unix domain sockets   netrom     NET/ROM
- 802       E802 protocol         ax25       AX25
- ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ========= =================== = ========== ===================
+ 802       E802 protocol         mptcp      Multipath TCP
+ appletalk Appletalk protocol    netfilter  Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose       X.25 PLP layer
+ core      General parameter     tipc       TIPC
+ ethernet  Ethernet protocol     unix       Unix domain sockets
  ipv4      IP version 4          x25        X.25 protocol
- bridge    Bridging              decnet     DEC net
- ipv6      IP version 6          tipc       TIPC
- ========= =================== = ========== ==================
+ ipv6      IP version 6
+ ========= =================== = ========== ===================
 
 1. /proc/sys/net/core - Network core options
 ============================================
@@ -271,7 +272,7 @@ poll cycle or the number of packets processed reaches netdev_budget.
 netdev_max_backlog
 ------------------
 
-Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
+Maximum number of packets, queued on the INPUT side, when the interface
 receives packets faster than kernel can process them.
 
 netdev_rss_key
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.15.187-gnu/Documentation/admin-guide/sysctl/vm.rst
index 5e795202111f..f4804ce37c58 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.15.187-gnu/Documentation/admin-guide/sysctl/vm.rst
@@ -948,7 +948,7 @@ how much memory needs to be free before kswapd goes back to sleep.
 
 The unit is in fractions of 10,000. The default value of 10 means the
 distances between watermarks are 0.1% of the available memory in the
-node/system. The maximum value is 1000, or 10% of memory.
+node/system. The maximum value is 3000, or 30% of memory.
 
 A high rate of threads entering direct reclaim (allocstall) or kswapd
 going to sleep prematurely (kswapd_low_wmark_hit_quickly) can indicate
diff --git linux-libre-5.15-gnu/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.15.187-gnu/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..8aaa5d13d3cc 100644
--- linux-libre-5.15-gnu/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.15.187-gnu/Documentation/arm64/cpu-feature-registers.rst
@@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space.
 
 The infrastructure emulates only the following system register space::
 
-	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
 
 (See Table C5-6 'System instruction encodings for non-Debug System
 register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,59 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/elf_hwcaps.rst linux-libre-5.15.187-gnu/Documentation/arm64/elf_hwcaps.rst
index ec1a5a63c1d0..b72ff17d600a 100644
--- linux-libre-5.15-gnu/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.15.187-gnu/Documentation/arm64/elf_hwcaps.rst
@@ -247,6 +247,18 @@ HWCAP2_MTE
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/silicon-errata.rst linux-libre-5.15.187-gnu/Documentation/arm64/silicon-errata.rst
index d410a47ffa57..a2cd4022415a 100644
--- linux-libre-5.15-gnu/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.15.187-gnu/Documentation/arm64/silicon-errata.rst
@@ -68,6 +68,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #2441007        | ARM64_ERRATUM_2441007       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #852523         | N/A                         |
@@ -76,10 +78,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #1319537        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #1319367        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
@@ -90,16 +96,76 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2441009        | ARM64_ERRATUM_2441009       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #3456084        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N3     | #3456111        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-600         | #1076982,1209401| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-700         | #2268618,2812531| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -146,6 +212,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
+|                | Hip09 SMMU PMCG |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -163,6 +232,16 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-5.15-gnu/Documentation/atomic_bitops.txt linux-libre-5.15.187-gnu/Documentation/atomic_bitops.txt
index 093cdaefdb37..d8b101c97031 100644
--- linux-libre-5.15-gnu/Documentation/atomic_bitops.txt
+++ linux-libre-5.15.187-gnu/Documentation/atomic_bitops.txt
@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 
diff --git linux-libre-5.15-gnu/Documentation/conf.py linux-libre-5.15.187-gnu/Documentation/conf.py
index 948a97d6387d..76b31798f94f 100644
--- linux-libre-5.15-gnu/Documentation/conf.py
+++ linux-libre-5.15.187-gnu/Documentation/conf.py
@@ -161,7 +161,7 @@ finally:
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
diff --git linux-libre-5.15-gnu/Documentation/core-api/dma-api.rst linux-libre-5.15.187-gnu/Documentation/core-api/dma-api.rst
index 6d6d0edd2d27..829f20a193ca 100644
--- linux-libre-5.15-gnu/Documentation/core-api/dma-api.rst
+++ linux-libre-5.15.187-gnu/Documentation/core-api/dma-api.rst
@@ -204,6 +204,20 @@ Returns the maximum size of a mapping for the device. The size parameter
 of the mapping functions like dma_map_single(), dma_map_page() and
 others should not be larger than the returned value.
 
+::
+
+	size_t
+	dma_opt_mapping_size(struct device *dev);
+
+Returns the maximum optimal size of a mapping for the device.
+
+Mapping larger buffers may take much longer in certain scenarios. In
+addition, for high-rate short-lived streaming mappings, the upfront time
+spent on the mapping may account for an appreciable part of the total
+request lifetime. As such, if splitting larger requests incurs no
+significant performance penalty, then device drivers are advised to
+limit total DMA streaming mappings length to the returned value.
+
 ::
 
 	bool
diff --git linux-libre-5.15-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-5.15.187-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17a..895285c037c7 100644
--- linux-libre-5.15-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-5.15.187-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-5.15-gnu/Documentation/dev-tools/kfence.rst linux-libre-5.15.187-gnu/Documentation/dev-tools/kfence.rst
index 0fbe3308bf37..b6671d907836 100644
--- linux-libre-5.15-gnu/Documentation/dev-tools/kfence.rst
+++ linux-libre-5.15.187-gnu/Documentation/dev-tools/kfence.rst
@@ -41,6 +41,18 @@ guarded by KFENCE. The default is configurable via the Kconfig option
 ``CONFIG_KFENCE_SAMPLE_INTERVAL``. Setting ``kfence.sample_interval=0``
 disables KFENCE.
 
+The sample interval controls a timer that sets up KFENCE allocations. By
+default, to keep the real sample interval predictable, the normal timer also
+causes CPU wake-ups when the system is completely idle. This may be undesirable
+on power-constrained systems. The boot parameter ``kfence.deferrable=1``
+instead switches to a "deferrable" timer which does not force CPU wake-ups on
+idle systems, at the risk of unpredictable sample intervals. The default is
+configurable via the Kconfig option ``CONFIG_KFENCE_DEFERRABLE``.
+
+.. warning::
+   The KUnit test suite is very likely to fail when using a deferrable timer
+   since it currently causes very unpredictable sample intervals.
+
 The KFENCE memory pool is of fixed size, and if the pool is exhausted, no
 further KFENCE allocations occur. With ``CONFIG_KFENCE_NUM_OBJECTS`` (default
 255), the number of available guarded objects can be controlled. Each object
@@ -231,10 +243,14 @@ Guarded allocations are set up based on the sample interval. After expiration
 of the sample interval, the next allocation through the main allocator (SLAB or
 SLUB) returns a guarded allocation from the KFENCE object pool (allocation
 sizes up to PAGE_SIZE are supported). At this point, the timer is reset, and
-the next allocation is set up after the expiration of the interval. To "gate" a
-KFENCE allocation through the main allocator's fast-path without overhead,
-KFENCE relies on static branches via the static keys infrastructure. The static
-branch is toggled to redirect the allocation to KFENCE.
+the next allocation is set up after the expiration of the interval.
+
+When using ``CONFIG_KFENCE_STATIC_KEYS=y``, KFENCE allocations are "gated"
+through the main allocator's fast-path by relying on static branches via the
+static keys infrastructure. The static branch is toggled to redirect the
+allocation to KFENCE. Depending on sample interval, target workloads, and
+system architecture, this may perform better than the simple dynamic branch.
+Careful benchmarking is recommended.
 
 KFENCE objects each reside on a dedicated page, at either the left or right
 page boundaries selected at random. The pages to the left and right of the
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index 880ddafc634e..a702a18d845e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -135,28 +135,34 @@ properties:
           - const: qcom,msm8974
 
       - items:
-          - enum:
-              - alcatel,idol347
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
           - enum:
-              - longcheer,l8150
+              - alcatel,idol347
               - samsung,a3u-eur
               - samsung,a5u-eur
           - const: qcom,msm8916
 
+      - items:
+          - const: longcheer,l8150
+          - const: qcom,msm8916-v1-qrd/9-v1
+          - const: qcom,msm8916
+
       - items:
           - enum:
               - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
               - sony,karin-row
               - sony,satsuki-row
               - sony,sumire-row
               - sony,suzuran-row
-              - qcom,msm8994
-          - const: qcom,apq8094
+          - const: qcom,msm8994
 
       - items:
           - const: qcom,msm8996-mtp
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/ata/ahci-ceva.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-  - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
-  - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
-			CINMP : COMINIT Negate Minimum Period.
-			CIBGN : COMINIT Burst Gap Nominal.
-			CIBGMX: COMINIT Burst Gap Maximum.
-			CIBGMN: COMINIT Burst Gap Minimum.
-  - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
-  - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
-			CWBGMN: COMWAKE Burst Gap Minimum.
-			CWBGMX: COMWAKE Burst Gap Maximum.
-			CWBGN: COMWAKE Burst Gap Nominal.
-			CWNMP: COMWAKE Negate Minimum Period.
-  - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
-  - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
-			BMX: COM Burst Maximum.
-			BNM: COM Burst Nominal.
-			SFD: Signal Failure Detection value.
-			PTST: Partial to Slumber timer value.
-  - ceva,p0-retry-params: Retry interval timing value for port 0.
-  - ceva,p1-retry-params: Retry interval timing value for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
-			RIT:  Retry Interval Timer.
-			RCT:  Rate Change Timer.
-
-Optional properties:
-  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
-  - phys: phandle for the PHY device
-  - resets: phandle to the reset controller for the SATA IP
-
-Examples:
-	ahci@fd0c0000 {
-		compatible = "ceva,ahci-1v84";
-		reg = <0xfd0c0000 0x200>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 133 4>;
-		clocks = <&clkc SATA_CLK_ID>;
-		ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
-		ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-		ceva,broken-gen2;
-		phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
-		resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	};
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 000000000000..71364c6081ff
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk SATA_REF>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 983033fe5b17..592285f616f5 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..005e0edd4609 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,16 +22,32 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
   '#clock-cells':
     const: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 229af98b1d30..7cd88bc3a67d 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -16,8 +16,6 @@ description: |
   reads required input clock frequencies from the devicetree and acts as clock
   provider for all clock consumers of PS clocks.
 
-select: false
-
 properties:
   compatible:
     const: xlnx,versal-clk
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659fa610..0420fa563532 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -104,8 +104,7 @@ properties:
       - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
         Type-C Cable and Connector specification, when Power Delivery is not
         supported.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - default
       - 1.5A
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f10..343598c9f473 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 851cb0781217..047fd69e0377 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a32660e0..a9d34dd7bbc5 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -72,8 +72,7 @@ properties:
       - const: hpd-removed
 
   ddc:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: >
       Phandle of the I2C controller used for DDC EDID probing
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a79b909..f08a01dfedf3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@ properties:
 
   adi,input-depth:
     description: Number of bits per color component at the input.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 8, 10, 12 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
 
   adi,input-colorspace:
     description: Input color space.
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index f36209137c8a..6916bc1b7a0f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -87,7 +87,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   ports:
     description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
index 9be44a682e67..b00246faea57 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -26,9 +26,8 @@ properties:
   reg-io-width:
     description:
       Width (in bytes) of the registers specified by the reg property.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4]
     default: 1
 
   clocks:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 35426fde8610..4b2cd556483c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -31,7 +31,7 @@ properties:
       - description: Display byte clock
       - description: Display byte interface clock
       - description: Display pixel clock
-      - description: Display escape clock
+      - description: Display core clock
       - description: Display AHB clock
       - description: Display AXI clock
 
@@ -64,6 +64,18 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     minItems: 2
     maxItems: 2
@@ -135,8 +147,6 @@ required:
   - phy-names
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
 additionalProperties: false
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 4399715953e1..4dd5eed50506 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -39,7 +39,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 064df50e21a5..23355ac67d3d 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -37,7 +37,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..ddb0ac4c29d4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -34,6 +34,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/panel/display-timings.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index 56903ded005e..6d30575819d3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -31,8 +31,7 @@ properties:
 patternProperties:
   "^timing":
     type: object
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#
 
 additionalProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..419c3b2ac5a6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -72,6 +72,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/ste,mcde.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/ste,mcde.yaml
index de0c678b3c29..564ea845c82e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -58,8 +58,8 @@ patternProperties:
   "^dsi@[0-9a-f]+$":
     description: subnodes for the three DSI host adapters
     type: object
-    allOf:
-      - $ref: dsi-controller.yaml#
+    $ref: dsi-controller.yaml#
+
     properties:
       compatible:
         const: ste,mcde-dsi
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index b6e1ebfaf366..bb3cbc30d912 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -64,7 +64,7 @@ if:
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 378da2649e66..980f92ad9eba 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -11,7 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    const: xlnx,zynq-gpio-1.0
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
 
   reg:
     maxItems: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index b386e4128a79..d3e01d8c043c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -22,7 +22,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
new file mode 100644
index 000000000000..ba54d6998f2e
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+description: |
+  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* Example for a I2C device node */
+                accelerometer@1d {
+                        compatible = "adi,adxl355";
+                        reg = <0x1d>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                accelerometer@0 {
+                        compatible = "adi,adxl355";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+                        interrupt-names = "DRDY";
+                };
+        };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
index c115e2e99bd9..4a7b1385fdc7 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -86,7 +86,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index d5c54813ce87..a8f7720d1e3e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -54,7 +54,7 @@ examples:
 
           ad5766@0 {
               compatible = "adi,ad5766";
-              output-range-microvolts = <(-5000) 5000>;
+              output-range-microvolts = <(-5000000) 5000000>;
               reg = <0>;
               spi-cpol;
               spi-max-frequency = <1000000>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index b6bbc312a7cf..1414ba9977c1 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -24,8 +24,10 @@ properties:
 
   interrupts:
     minItems: 1
+    maxItems: 2
     description:
       Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
 
 required:
   - compatible
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
index c13c10c8d65d..eed0df9d3a23 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 721878d5b7af..2ee04e03bc22 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -61,11 +61,10 @@ patternProperties:
         description: EV_ABS specific event code generated by the axis.
 
       abs-range:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              - description: minimum value
-              - description: maximum value
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
         description: >
           Minimum and maximum values produced by the axis.
           For an ABS_X axis this will be the left-most and right-most
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2..34c43d3bddfd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
 - vdd-supply: phandle of the regulator that provides the supply voltage.
 - post-power-on-delay-ms: time required by the device after enabling its regulators
   or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
 
 Example:
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index c7ed2871da06..14bebe1ad8f8 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -32,8 +32,9 @@ properties:
 patternProperties:
   "^multi-led@[0-9a-b]$":
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     description:
       This node represents one of the RGB LED devices on Turris Omnia.
       No subnodes need to be added for subchannels since this controller only
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 37445c68cdef..71fcd10cb9bc 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -19,22 +19,22 @@ description: |
   LED class.  Common LED nodes and properties are inherited from the common.yaml
   within this documentation directory.
 
-patternProperties:
-  "^multi-led@([0-9a-f])$":
-    type: object
-    description: Represents the LEDs that are to be grouped.
-    properties:
-      color:
-        description: |
-          For multicolor LED support this property should be defined as either
-          LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-          include/linux/leds/common.h.
-        enum: [ 8, 9 ]
-
-    $ref: "common.yaml#"
-
-    required:
-      - color
+properties:
+  $nodename:
+    pattern: "^multi-led(@[0-9a-f])?$"
+
+  color:
+    description: |
+      For multicolor LED support this property should be defined as either
+      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+      include/dt-bindings/leds/common.h.
+    enum: [ 8, 9 ]
+
+required:
+  - color
+
+allOf:
+  - $ref: "common.yaml#"
 
 additionalProperties: true
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5feadc7..64d07fd20eab 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -55,8 +55,9 @@ properties:
 patternProperties:
   '^multi-led@[0-9a-f]$':
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     properties:
       reg:
         minItems: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 000000000000..03fc14d1601f
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+          color = <LED_COLOR_ID_RGB>;
+          function = LED_FUNCTION_INDICATOR;
+          max-brightness = <65535>;
+
+          led-red {
+              pwms = <&pwm1 0 1000000>;
+              color = <LED_COLOR_ID_RED>;
+          };
+
+          led-green {
+              pwms = <&pwm2 0 1000000>;
+              color = <LED_COLOR_ID_GREEN>;
+          };
+
+          led-blue {
+              pwms = <&pwm3 0 1000000>;
+              color = <LED_COLOR_ID_BLUE>;
+          };
+        };
+    };
+
+...
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..6df2838d5f5b
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table, the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-lpg
+      - qcom,pm8150l-lpg
+      - qcom,pm8916-pwm
+      - qcom,pm8941-lpg
+      - qcom,pm8994-lpg
+      - qcom,pmc8180c-lpg
+      - qcom,pmi8994-lpg
+      - qcom,pmi8998-lpg
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputed, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg: true
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+...
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddc..c87677f5e2a2 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 877183cf4278..1ef849dc74d7 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2353f6cf3c80..750720e0123a 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -106,7 +106,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
 
     then:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index d793dd0316b7..546746c2e406 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -39,18 +39,14 @@ properties:
     description:
       This property specifies the delay in usecs between the
       assertion of the CS and the first clock pulse.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,cros-ec-spi-msg-delay:
     description:
       This property specifies the delay in usecs between messages.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,has-vbc-nvram:
     description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index fe265bcab50d..91df60d56629 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: ../regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 25ac8e200970..093bdad8daf8 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index bd217e6f5018..5cd144a9ec99 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,7 +55,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-engine:
         allOf:
@@ -184,7 +184,7 @@ examples:
         nand-use-soft-ecc-engine;
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
 
       nand@1 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 0922536b1811..d681a4676f06 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -96,8 +96,7 @@ patternProperties:
 
       rockchip,boot-ecc-strength:
         enum: [16, 24, 40, 60, 70]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         description: |
           If specified it indicates that a different BCH/ECC setting is
           supported by the boot ROM.
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
index fbdc2083bec4..20ee96584aba 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -23,6 +23,7 @@ properties:
       - brcm,bcm4345c5
       - brcm,bcm43540-bt
       - brcm,bcm4335a0
+      - brcm,bcm4349-bt
 
   shutdown-gpios:
     maxItems: 1
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..ee42328a109d 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b8a0b392b24e..c52ec1ee7df6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -106,6 +106,10 @@ properties:
           - const: imem
           - const: config
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
@@ -221,6 +225,8 @@ examples:
                                      "imem",
                                      "config";
 
+                qcom,qmp = <&aoss_qmp>;
+
                 qcom,smem-states = <&ipa_smp2p_out 0>,
                                    <&ipa_smp2p_out 1>;
                 qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index c115c95ee584..5b8db76b6cdd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -53,20 +53,18 @@ properties:
         - allwinner,sun8i-r40-emac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - ingenic,jz4775-mac
         - ingenic,x1000-mac
         - ingenic,x1600-mac
         - ingenic,x1830-mac
         - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 07a00f53adbf..31bf825c6598 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -88,8 +88,7 @@ properties:
         type: object
         description: CPSW external ports
 
-        allOf:
-          - $ref: ethernet-controller.yaml#
+        $ref: ethernet-controller.yaml#
 
         properties:
           reg:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index ff317fd7c15b..2e1fcff3c280 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -14,9 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-ocotp
-      - fsl,imx28-ocotp
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
 
   "#address-cells":
     const: 1
@@ -40,7 +42,7 @@ additionalProperties: false
 examples:
   - |
     ocotp: efuse@8002c000 {
-        compatible = "fsl,imx28-ocotp";
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
         #address-cells = <1>;
         #size-cells = <1>;
         reg = <0x8002c000 0x2000>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444fd..9b0548264a39 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -59,7 +56,7 @@ properties:
       - const: pcie
       - const: pcie_bus
       - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -166,6 +163,47 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_inbound_axi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..835b6db00c27 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,18 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
@@ -121,5 +133,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 30b6396d83c8..aea0e2bcdd77 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
similarity index 85%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
index 399ebde45409..ff86c87309a4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB2 PHY
@@ -13,8 +13,8 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb2-phy
-      - amlogic,meson-a1-usb2-phy
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -68,7 +68,7 @@ additionalProperties: false
 examples:
   - |
     phy@36000 {
-          compatible = "amlogic,meson-g12a-usb2-phy";
+          compatible = "amlogic,g12a-usb2-phy";
           reg = <0x36000 0x2000>;
           clocks = <&xtal>;
           clock-names = "xtal";
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 453c083cf44c..84738644e398 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -49,7 +49,7 @@ additionalProperties: false
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 3329f1d33a4f..3da0c4ee45cf 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -76,8 +76,7 @@ patternProperties:
 
       connector:
         type: object
-        allOf:
-          - $ref: ../connector/usb-connector.yaml
+        $ref: /schemas/connector/usb-connector.yaml
         properties:
           vbus-supply: true
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ad2866c99738..fcd82df3aebb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index 0feecd376c69..9aed3a58f39e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -94,7 +94,8 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
@@ -102,8 +103,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -120,10 +122,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -156,10 +159,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -175,11 +179,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -257,33 +262,34 @@ patternProperties:
           pins:
             description: |
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index 4fe35e650909..8dcdd32c2e01 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -138,7 +138,7 @@ examples:
       clocks = <&sys_clk>;
       pinctrl-0 = <&sgpio2_pins>;
       pinctrl-names = "default";
-      reg = <0x1101059c 0x100>;
+      reg = <0x1101059c 0x118>;
       microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
       bus-frequency = <25000000>;
       sgpio_in2: gpio@0 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
index 72e8f274c791..99f506d6b0a0 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -46,9 +46,7 @@ additionalProperties: false
 patternProperties:
   "^i2c@[1-4]$":
     type: object
-
-    allOf:
-      - $ref: /schemas/i2c/i2c-controller.yaml#
+    $ref: /schemas/i2c/i2c-controller.yaml#
 
 examples:
   - |
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 61dd5af80db6..eed0b3fa2d82 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -30,10 +30,6 @@ properties:
         type: object
         $ref: "regulator.yaml#"
 
-        properties:
-          regulator-name:
-            pattern: "^vbuck[1-4]$"
-
     additionalProperties: false
 
 required:
@@ -51,19 +47,17 @@ examples:
 
       regulators {
         vbuck1 {
-          regulator-compatible = "vbuck1";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
 
         vbuck3 {
-          regulator-compatible = "vbuck3";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
       };
     };
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index f70f2e758a00..e66aac0ad735 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index 130fbaacc4b1..3daa4b37f4f6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -94,8 +94,7 @@ patternProperties:
       addresses. Cache and memory access settings are provided through a
       Memory Protection Unit (MPU), programmable only from the R5Fs.
 
-    allOf:
-      - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+    $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
     properties:
       compatible:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index 2b1f91603897..b72ec404adcd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -47,7 +47,7 @@ properties:
     const: 2
 
   cache-sets:
-    const: 1024
+    enum: [1024, 2048]
 
   cache-size:
     const: 2097152
@@ -85,6 +85,8 @@ then:
       description: |
         Must contain entries for DirError, DataError and DataFail signals.
       maxItems: 3
+    cache-sets:
+      const: 1024
 
 else:
   properties:
@@ -92,6 +94,8 @@ else:
       description: |
         Must contain entries for DirError, DataError, DataFail, DirFail signals.
       minItems: 4
+    cache-sets:
+      const: 2048
 
 additionalProperties: false
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index fa767440f281..ca59e2c1d255 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -44,7 +44,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index 6b8731f7f2fb..1a8d9bf89feb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -79,7 +79,7 @@ properties:
           - description: Error interrupt
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
-          - description: Transmit End interrupt
+          - description: Break interrupt
       - items:
           - description: Error interrupt
           - description: Receive buffer full interrupt
@@ -94,7 +94,7 @@ properties:
           - const: eri
           - const: rxi
           - const: txi
-          - const: tei
+          - const: bri
       - items:
           - const: eri
           - const: rxi
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 0c9fa694f85c..bc43670c69fa 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 1000
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 1000
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index cc3fe5ed7421..1b0062e3c1a4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -34,6 +34,8 @@ properties:
       - qcom,rpm-ipq6018
       - qcom,rpm-msm8226
       - qcom,rpm-msm8916
+      - qcom,rpm-msm8936
+      - qcom,rpm-msm8953
       - qcom,rpm-msm8974
       - qcom,rpm-msm8976
       - qcom,rpm-msm8996
@@ -57,6 +59,7 @@ if:
           - qcom,rpm-apq8084
           - qcom,rpm-msm8916
           - qcom,rpm-msm8974
+          - qcom,rpm-msm8953
 then:
   required:
     - qcom,smd-channels
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index dfebf425ca49..8fe31a7083db 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -141,6 +141,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 9d128b9e7deb..64461d432004 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -281,10 +281,7 @@ patternProperties:
       PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
       that is common to all the PRU cores. This should be represented as an
       interrupt-controller node.
-
-    allOf:
-      - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
-
+    $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
     type: object
 
   mdio@[a-f0-9]+$:
@@ -292,10 +289,7 @@ patternProperties:
       MDIO Node. Each PRUSS has an MDIO module that can be used to control
       external PHYs. The MDIO module used within the PRU-ICSS is an instance of
       the MDIO Controller used in TI Davinci SoCs.
-
-    allOf:
-      - $ref: /schemas/net/ti,davinci-mdio.yaml#
-
+    $ref: /schemas/net/ti,davinci-mdio.yaml#
     type: object
 
   "^(pru|rtu|txpru)@[0-9a-f]+$":
@@ -305,10 +299,7 @@ patternProperties:
       inactive by using the standard DT string property, "status". The ICSSG IP
       present on K3 SoCs have additional auxiliary PRU cores with slightly
       different IP integration.
-
-    allOf:
-      - $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
-
+    $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
     type: object
 
 required:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 2e35aeaa8781..89e3819c6127 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -61,7 +61,7 @@ patternProperties:
         description: phandle of the CPU DAI
 
     patternProperties:
-      "^codec-[0-9]+$":
+      "^codec(-[0-9]+)?$":
         type: object
         description: |-
           Codecs:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
index a54f466f769d..74330f54d6db 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/rt5645.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1f..c1fa379f5f3e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index f97132400bb6..2c5e237db499 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -113,8 +113,7 @@ patternProperties:
           By default, custom protocol is assumed, meaning that protocol is
           configured according to protocol defined in related DAI link node,
           such as i2s, left justified, right justified, dsp and pdm protocols.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/flag
+        $ref: /schemas/types.yaml#/definitions/flag
 
       "#clock-cells":
         description: Configure the SAI device as master clock provider.
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
index acd4bbe69731..4adaf92233c8 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -52,7 +52,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -69,7 +71,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml
index 5bf8c76ecda1..1ffe1a01668f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tas2764.yaml
@@ -46,7 +46,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -63,7 +65,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
index 027bebf4e8cf..aceba9ed813e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -54,7 +54,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -71,7 +73,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index d77c8283526d..2ad17b361db0 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -176,13 +176,12 @@ patternProperties:
        4 - Drive weak low and active high
        5 - Drive Hi-Z and active high
 
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          maximum: 15
-        default: [2, 2]
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 15
+    default: [2, 2]
 
 required:
   - compatible
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 35a8045b2c70..53627c6e2ae3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -106,7 +106,7 @@ examples:
             dma-names = "rx", "tx";
 
             flash@0 {
-                    compatible = "spi-nor";
+                    compatible = "jedec,spi-nor";
                     reg = <0>;
                     spi-max-frequency = <104000000>;
                     spi-tx-bus-width = <2>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index ef5698f426b2..392204a08e96 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -45,6 +45,7 @@ properties:
     maxItems: 2
 
   interconnect-names:
+    minItems: 1
     items:
       - const: qspi-config
       - const: qspi-memory
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index 9787be21318e..82d0ca5c00f3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -49,6 +49,13 @@ properties:
     enum: [ 0, 1 ]
     default: 0
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 8246891602e7..6d0511a8727f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -93,74 +93,7 @@ properties:
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
-
-    properties:
-      compatible:
-        description:
-          Compatible of the SPI device.
-
-      reg:
-        minItems: 1
-        maxItems: 256
-        items:
-          minimum: 0
-          maximum: 256
-        description:
-          Chip select used by the device.
-
-      spi-3wire:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires 3-wire mode.
-
-      spi-cpha:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires shifted clock phase (CPHA) mode.
-
-      spi-cpol:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires inverse clock polarity (CPOL) mode.
-
-      spi-cs-high:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires the chip select active high.
-
-      spi-lsb-first:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires the LSB first mode.
-
-      spi-max-frequency:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          Maximum SPI clocking speed of the device in Hz.
-
-      spi-rx-bus-width:
-        description:
-          Bus width to the SPI bus used for read transfers.
-          If 0 is provided, then no RX will be possible on this device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2, 4, 8]
-        default: 1
-
-      spi-rx-delay-us:
-        description:
-          Delay, in microseconds, after a read transfer.
-
-      spi-tx-bus-width:
-        description:
-          Bus width to the SPI bus used for write transfers.
-          If 0 is provided, then no TX will be possible on this device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2, 4, 8]
-        default: 1
-
-      spi-tx-delay-us:
-        description:
-          Delay, in microseconds, after a write transfer.
+    $ref: spi-peripheral-props.yaml
 
     required:
       - compatible
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
new file mode 100644
index 000000000000..105fa2840e72
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a SPI bus.
+
+description:
+  Many SPI controllers need to add properties to peripheral devices. They could
+  be common properties like spi-max-frequency, spi-cpha, etc. or they could be
+  controller specific like delay in clock or data lines, etc. These properties
+  need to be defined in the peripheral node because they are per-peripheral and
+  there can be multiple peripherals attached to a controller. All those
+  properties are listed here. The controller specific properties should go in
+  their own separate schema that should be referenced from here.
+
+maintainers:
+  - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 256
+    items:
+      minimum: 0
+      maximum: 256
+    description:
+      Chip select used by the device.
+
+  spi-3wire:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires 3-wire mode.
+
+  spi-cpha:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
+  spi-cs-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the chip select active high.
+
+  spi-lsb-first:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the LSB first mode.
+
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum SPI clocking speed of the device in Hz.
+
+  spi-rx-bus-width:
+    description:
+      Bus width to the SPI bus used for read transfers.
+      If 0 is provided, then no RX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-rx-delay-us:
+    description:
+      Delay, in microseconds, after a read transfer.
+
+  spi-tx-bus-width:
+    description:
+      Bus width to the SPI bus used for write transfers.
+      If 0 is provided, then no TX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-tx-delay-us:
+    description:
+      Delay, in microseconds, after a write transfer.
+
+# The controller specific properties go here.
+
+additionalProperties: true
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index ea72c8001256..fafde1c06be6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -30,6 +30,13 @@ properties:
   clocks:
     maxItems: 2
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index a07de5ed0ca6..b5e9f22b28f0 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
@@ -199,12 +202,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index dc9d6ed0781d..5d0bfea2c087 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -64,7 +64,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 8913497624de..cb5da1df8d40 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -135,7 +135,8 @@ properties:
       Phandle of a companion.
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index acbf94fa5f74..d5fd3aa53ed2 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -102,7 +102,8 @@ properties:
       Overrides the detected port count
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 11f7bacd4e2b..620cbf00bedb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -56,6 +56,7 @@ properties:
       - description: optional, wakeup interrupt used to support runtime PM
 
   interrupt-names:
+    minItems: 1
     items:
       - const: host
       - const: wakeup
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 078fb7889593..5d1e49d823c9 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -240,7 +240,7 @@ properties:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
-    $ref: /schemas/types.yaml#/definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/string
     enum: [utmi, ulpi]
 
   snps,quirk-frame-length-adjustment:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/st,stusb160x.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index 9a51efa9d101..35477fc6d9f4 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -32,9 +32,7 @@ properties:
 
   connector:
     type: object
-
-    allOf:
-      - $ref: ../connector/usb-connector.yaml
+    $ref: /schemas/connector/usb-connector.yaml#
 
     properties:
       compatible:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 56853c17af66..1dc3d5d7b44f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -33,7 +33,7 @@ patternProperties:
   "^.*@[0-9a-f]{1,2}$":
     description: The hard wired USB devices
     type: object
-    $ref: /usb/usb-device.yaml
+    $ref: /schemas/usb/usb-device.yaml
 
 additionalProperties: true
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index a867f7102c35..38fc30b90f6c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -782,6 +782,8 @@ patternProperties:
     description: National Semiconductor
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..93cd77a6e92c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420 and Exynos7).
 
 required:
   - compatible
@@ -58,6 +58,7 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
     then:
       required:
         - samsung,syscon-phandle
diff --git linux-libre-5.15-gnu/Documentation/devicetree/overlay-notes.rst linux-libre-5.15.187-gnu/Documentation/devicetree/overlay-notes.rst
index b2b8db765b8c..e139f22b363e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/overlay-notes.rst
+++ linux-libre-5.15.187-gnu/Documentation/devicetree/overlay-notes.rst
@@ -119,10 +119,32 @@ Finally, if you need to remove all overlays in one-go, just call
 of_overlay_remove_all() which will remove every single one in the correct
 order.
 
-In addition, there is the option to register notifiers that get called on
+There is the option to register notifiers that get called on
 overlay operations. See of_overlay_notifier_register/unregister and
 enum of_overlay_notify_action for details.
 
-Note that a notifier callback is not supposed to store pointers to a device
-tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
-respective node it received.
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE.  The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called.  Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay.  These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content.  The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data.  Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.
diff --git linux-libre-5.15-gnu/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.15.187-gnu/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.15-gnu/Documentation/driver-api/firewire.rst linux-libre-5.15.187-gnu/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/firewire.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.15-gnu/Documentation/driver-api/firmware/other_interfaces.rst linux-libre-5.15.187-gnu/Documentation/driver-api/firmware/other_interfaces.rst
index b81794e0cfbb..06ac89adaafb 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/firmware/other_interfaces.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/firmware/other_interfaces.rst
@@ -13,6 +13,12 @@ EDD Interfaces
 .. kernel-doc:: drivers/firmware/edd.c
    :internal:
 
+Generic System Framebuffers Interface
+-------------------------------------
+
+.. kernel-doc:: drivers/firmware/sysfb.c
+   :export:
+
 Intel Stratix10 SoC Service Layer
 ---------------------------------
 Some features of the Intel Stratix10 SoC require a level of privilege
diff --git linux-libre-5.15-gnu/Documentation/driver-api/fpga/fpga-region.rst linux-libre-5.15.187-gnu/Documentation/driver-api/fpga/fpga-region.rst
index 2636a27c11b2..2d03b5fb7657 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/fpga/fpga-region.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/fpga/fpga-region.rst
@@ -46,10 +46,16 @@ API to add a new FPGA region
 ----------------------------
 
 * struct fpga_region - The FPGA region struct
-* devm_fpga_region_create() - Allocate and init a region struct
-* fpga_region_register() -  Register an FPGA region
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
+  fpga_region_info structure to provide the full flexibility of options
+* __fpga_region_register() -  Create and register an FPGA region using standard
+  arguments
 * fpga_region_unregister() -  Unregister an FPGA region
 
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
+
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
@@ -75,11 +81,14 @@ following APIs to handle building or tearing down that list.
 .. kernel-doc:: include/linux/fpga/fpga-region.h
    :functions: fpga_region
 
+.. kernel-doc:: include/linux/fpga/fpga-region.h
+   :functions: fpga_region_info
+
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: devm_fpga_region_create
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister
diff --git linux-libre-5.15-gnu/Documentation/driver-api/generic-counter.rst linux-libre-5.15.187-gnu/Documentation/driver-api/generic-counter.rst
index 64fe7db080e5..252aeb639bc4 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/generic-counter.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/generic-counter.rst
@@ -247,7 +247,7 @@ for defining a counter device.
 .. kernel-doc:: include/linux/counter.h
    :internal:
 
-.. kernel-doc:: drivers/counter/counter.c
+.. kernel-doc:: drivers/counter/counter-core.c
    :export:
 
 Implementation
diff --git linux-libre-5.15-gnu/Documentation/driver-api/ipmi.rst linux-libre-5.15.187-gnu/Documentation/driver-api/ipmi.rst
index bc281f10ce4b..0bfeeeeb17c8 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/ipmi.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/ipmi.rst
@@ -519,7 +519,7 @@ at module load time (for a module) with::
 	alerts_broken
 
 The addresses are normal I2C addresses.  The adapter is the string
-name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
+name of the adapter, as shown in /sys/bus/i2c/devices/i2c-<n>/name.
 It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
 spaces, so if the name is "This is an I2C chip" you can say
 adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
diff --git linux-libre-5.15-gnu/Documentation/driver-api/spi.rst linux-libre-5.15.187-gnu/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/spi.rst
+++ linux-libre-5.15.187-gnu/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-5.15-gnu/Documentation/fault-injection/fault-injection.rst linux-libre-5.15.187-gnu/Documentation/fault-injection/fault-injection.rst
index 4a25c5eb6f07..8c47847755a6 100644
--- linux-libre-5.15-gnu/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-5.15.187-gnu/Documentation/fault-injection/fault-injection.rst
@@ -83,9 +83,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most. A value of -1
-	means "no limit". Note, though, that this file only accepts unsigned
-	values. So, if you want to specify -1, you better use 'printf' instead
-	of 'echo', e.g.: $ printf %#x -1 > times
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -277,7 +275,7 @@ Application Examples
     echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -331,7 +329,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -362,7 +360,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
 
diff --git linux-libre-5.15-gnu/Documentation/filesystems/autofs-mount-control.rst linux-libre-5.15.187-gnu/Documentation/filesystems/autofs-mount-control.rst
index bf4b511cdbe8..b5a379d25c40 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/autofs-mount-control.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/autofs-mount-control.rst
@@ -196,7 +196,7 @@ information and return operation results::
 		    struct args_ismountpoint	ismountpoint;
 	    };
 
-	    char path[0];
+	    char path[];
     };
 
 The ioctlfd field is a mount point file descriptor of an autofs mount
diff --git linux-libre-5.15-gnu/Documentation/filesystems/autofs.rst linux-libre-5.15.187-gnu/Documentation/filesystems/autofs.rst
index 681c6a492bc0..1b495768e7aa 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/autofs.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/autofs.rst
@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 			struct args_ismountpoint	ismountpoint;
 		};
 
-                char path[0];
+                char path[];
         };
 
 For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target
diff --git linux-libre-5.15-gnu/Documentation/filesystems/directory-locking.rst linux-libre-5.15.187-gnu/Documentation/filesystems/directory-locking.rst
index 504ba940c36c..193c22687851 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/directory-locking.rst
@@ -23,13 +23,15 @@ exclusive.
 locks victim and calls the method.  Locks are exclusive.
 
 4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
-NB: we might get away with locking the source (and target in exchange
-case) shared.
+the parent and finds source and target.  Then we decide which of the
+source and target need to be locked.  Source needs to be locked if it's a
+non-directory; target - if it's a non-directory or about to be removed.
+Take the locks that need to be taken, in inode pointer order if need
+to take both (that can happen only when both source and target are
+non-directories - the source because it wouldn't be locked otherwise
+and the target because mixing directory and non-directory is allowed
+only with RENAME_EXCHANGE, and that won't be removing the target).
+After the locks had been taken, call the method.  All locks are exclusive.
 
 5) link creation.  Locking rules:
 
@@ -44,19 +46,18 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock the parent of source first.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock subdirectories involved (source before target).
+	* Lock non-directories involved, in inode pointer order.
 	* call the method.
 
-All ->i_rwsem are taken exclusive.  Again, we might get away with locking
-the source (and target in exchange case) shared.
+All ->i_rwsem are taken exclusive.
 
 The rules above obviously guarantee that all directories that are going to be
 read, modified or removed by method will be locked by caller.
@@ -66,8 +67,10 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+[XXX: will be updated once we are done massaging the lock_rename()]
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git linux-libre-5.15-gnu/Documentation/filesystems/ext4/attributes.rst linux-libre-5.15.187-gnu/Documentation/filesystems/ext4/attributes.rst
index 54386a010a8d..871d2da7a0a9 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/ext4/attributes.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/ext4/attributes.rst
@@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
diff --git linux-libre-5.15-gnu/Documentation/filesystems/f2fs.rst linux-libre-5.15.187-gnu/Documentation/filesystems/f2fs.rst
index 09de6ebbbdfa..7fe50b0bccde 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/f2fs.rst
@@ -197,6 +197,7 @@ fault_type=%d		 Support configuring fault injection type, should be
 			 FAULT_DISCARD		  0x000002000
 			 FAULT_WRITE_IO		  0x000004000
 			 FAULT_SLAB_ALLOC	  0x000008000
+			 FAULT_DQUOT_INIT	  0x000010000
 			 ===================	  ===========
 mode=%s			 Control block allocation mode which supports "adaptive"
 			 and "lfs". In "lfs" mode, there should be no random
diff --git linux-libre-5.15-gnu/Documentation/filesystems/fscrypt.rst linux-libre-5.15.187-gnu/Documentation/filesystems/fscrypt.rst
index 0eb799d9d05a..7940a45d3952 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
 
 Each encrypted directory tree is protected by a *master key*.  Master
 keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used.  For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits).  Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used.  For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes.  A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
 
 To "unlock" an encrypted directory tree, userspace must provide the
 appropriate master key.  There can be any number of master keys, each
diff --git linux-libre-5.15-gnu/Documentation/filesystems/idmappings.rst linux-libre-5.15.187-gnu/Documentation/filesystems/idmappings.rst
index 1229a75ec75d..7a879ec3b6bf 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/idmappings.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/idmappings.rst
@@ -952,75 +952,3 @@ The raw userspace id that is put on disk is ``u1000`` so when the user takes
 their home directory back to their home computer where they are assigned
 ``u1000`` using the initial idmapping and mount the filesystem with the initial
 idmapping they will see all those files owned by ``u1000``.
-
-Shortcircuting
---------------
-
-Currently, the implementation of idmapped mounts enforces that the filesystem
-is mounted with the initial idmapping. The reason is simply that none of the
-filesystems that we targeted were mountable with a non-initial idmapping. But
-that might change soon enough. As we've seen above, thanks to the properties of
-idmappings the translation works for both filesystems mounted with the initial
-idmapping and filesystem with non-initial idmappings.
-
-Based on this current restriction to filesystem mounted with the initial
-idmapping two noticeable shortcuts have been taken:
-
-1. We always stash a reference to the initial user namespace in ``struct
-   vfsmount``. Idmapped mounts are thus mounts that have a non-initial user
-   namespace attached to them.
-
-   In order to support idmapped mounts this needs to be changed. Instead of
-   stashing the initial user namespace the user namespace the filesystem was
-   mounted with must be stashed. An idmapped mount is then any mount that has
-   a different user namespace attached then the filesystem was mounted with.
-   This has no user-visible consequences.
-
-2. The translation algorithms in ``mapped_fs*id()`` and ``i_*id_into_mnt()``
-   are simplified.
-
-   Let's consider ``mapped_fs*id()`` first. This function translates the
-   caller's kernel id into a kernel id in the filesystem's idmapping via
-   a mount's idmapping. The full algorithm is::
-
-    mapped_fsuid(kid):
-      /* Map the kernel id up into a userspace id in the mount's idmapping. */
-      from_kuid(mount-idmapping, kid) = uid
-
-      /* Map the userspace id down into a kernel id in the filesystem's idmapping. */
-      make_kuid(filesystem-idmapping, uid) = kuid
-
-   We know that the filesystem is always mounted with the initial idmapping as
-   we enforce this in ``mount_setattr()``. So this can be shortened to::
-
-    mapped_fsuid(kid):
-      /* Map the kernel id up into a userspace id in the mount's idmapping. */
-      from_kuid(mount-idmapping, kid) = uid
-
-      /* Map the userspace id down into a kernel id in the filesystem's idmapping. */
-      KUIDT_INIT(uid) = kuid
-
-   Similarly, for ``i_*id_into_mnt()`` which translated the filesystem's kernel
-   id into a mount's kernel id::
-
-    i_uid_into_mnt(kid):
-      /* Map the kernel id up into a userspace id in the filesystem's idmapping. */
-      from_kuid(filesystem-idmapping, kid) = uid
-
-      /* Map the userspace id down into a kernel id in the mounts's idmapping. */
-      make_kuid(mount-idmapping, uid) = kuid
-
-   Again, we know that the filesystem is always mounted with the initial
-   idmapping as we enforce this in ``mount_setattr()``. So this can be
-   shortened to::
-
-    i_uid_into_mnt(kid):
-      /* Map the kernel id up into a userspace id in the filesystem's idmapping. */
-      __kuid_val(kid) = uid
-
-      /* Map the userspace id down into a kernel id in the mounts's idmapping. */
-      make_kuid(mount-idmapping, uid) = kuid
-
-Handling filesystems mounted with non-initial idmappings requires that the
-translation functions be converted to their full form. They can still be
-shortcircuited on non-idmapped mounts. This has no user-visible consequences.
diff --git linux-libre-5.15-gnu/Documentation/filesystems/locking.rst linux-libre-5.15.187-gnu/Documentation/filesystems/locking.rst
index d36fe79167b3..dabf4f7c755e 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/locking.rst
@@ -98,7 +98,7 @@ symlink:	exclusive
 mkdir:		exclusive
 unlink:		exclusive (both)
 rmdir:		exclusive (both)(see below)
-rename:		exclusive (all)	(see below)
+rename:		exclusive (both parents, some children)	(see below)
 readlink:	no
 get_link:	no
 setattr:	exclusive
@@ -118,6 +118,9 @@ fileattr_set:	exclusive
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
 	exclusive on victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->unlink() and ->rename() have ->i_rwsem exclusive on all non-directories
+	involved.
+	->rename() has ->i_rwsem exclusive on any subdirectory that changes parent.
 
 See Documentation/filesystems/directory-locking.rst for more detailed discussion
 of the locking scheme for directory operations.
@@ -439,17 +442,21 @@ prototypes::
 	void (*lm_break)(struct file_lock *); /* break_lease callback */
 	int (*lm_change)(struct file_lock **, int);
 	bool (*lm_breaker_owns_lease)(struct file_lock *);
+        bool (*lm_lock_expirable)(struct file_lock *);
+        void (*lm_expire_lock)(void);
 
 locking rules:
 
 ======================	=============	=================	=========
-ops			inode->i_lock	blocked_lock_lock	may block
+ops			   flc_lock  	blocked_lock_lock	may block
 ======================	=============	=================	=========
-lm_notify:		yes		yes			no
+lm_notify:		no      	yes			no
 lm_grant:		no		no			no
 lm_break:		yes		no			no
 lm_change		yes		no			no
-lm_breaker_owns_lease:	no		no			no
+lm_breaker_owns_lease:	yes     	no			no
+lm_lock_expirable	yes		no			no
+lm_expire_lock		no		no			yes
 ======================	=============	=================	=========
 
 buffer_head
diff --git linux-libre-5.15-gnu/Documentation/filesystems/mount_api.rst linux-libre-5.15.187-gnu/Documentation/filesystems/mount_api.rst
index eb358a00be27..12e30da6a511 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/mount_api.rst
@@ -778,7 +778,8 @@ process the parameters it is given.
 
    * ::
 
-       bool fs_validate_description(const struct fs_parameter_description *desc);
+       bool fs_validate_description(const char *name,
+                                    const struct fs_parameter_description *desc);
 
      This performs some validation checks on a parameter description.  It
      returns true if the description is good and false if it is not.  It will
diff --git linux-libre-5.15-gnu/Documentation/filesystems/nfs/exporting.rst linux-libre-5.15.187-gnu/Documentation/filesystems/nfs/exporting.rst
index 0e98edd353b5..6f59a364f84c 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/nfs/exporting.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/nfs/exporting.rst
@@ -215,3 +215,29 @@ following flags are defined:
     This flag causes nfsd to close any open files for this inode _before_
     calling into the vfs to do an unlink or a rename that would replace
     an existing file.
+
+  EXPORT_OP_REMOTE_FS - Backing storage for this filesystem is remote
+    PF_LOCAL_THROTTLE exists for loopback NFSD, where a thread needs to
+    write to one bdi (the final bdi) in order to free up writes queued
+    to another bdi (the client bdi). Such threads get a private balance
+    of dirty pages so that dirty pages for the client bdi do not imact
+    the daemon writing to the final bdi. For filesystems whose durable
+    storage is not local (such as exported NFS filesystems), this
+    constraint has negative consequences. EXPORT_OP_REMOTE_FS enables
+    an export to disable writeback throttling.
+
+  EXPORT_OP_NOATOMIC_ATTR - Filesystem does not update attributes atomically
+    EXPORT_OP_NOATOMIC_ATTR indicates that the exported filesystem
+    cannot provide the semantics required by the "atomic" boolean in
+    NFSv4's change_info4. This boolean indicates to a client whether the
+    returned before and after change attributes were obtained atomically
+    with the respect to the requested metadata operation (UNLINK,
+    OPEN/CREATE, MKDIR, etc).
+
+  EXPORT_OP_FLUSH_ON_CLOSE - Filesystem flushes file data on close(2)
+    On most filesystems, inodes can remain under writeback after the
+    file is closed. NFSD relies on client activity or local flusher
+    threads to handle writeback. Certain filesystems, such as NFS, flush
+    all of an inode's dirty data on last close. Exports that behave this
+    way should set EXPORT_OP_FLUSH_ON_CLOSE so that NFSD knows to skip
+    waiting for writeback when closing such files.
diff --git linux-libre-5.15-gnu/Documentation/filesystems/porting.rst linux-libre-5.15.187-gnu/Documentation/filesystems/porting.rst
index bf19fd6b86e7..569fdb7d7ed5 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/porting.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/porting.rst
@@ -908,3 +908,21 @@ Calling conventions for file_open_root() changed; now it takes struct path *
 instead of passing mount and dentry separately.  For callers that used to
 pass <mnt, mnt->mnt_root> pair (i.e. the root of given mount), a new helper
 is provided - file_open_root_mnt().  In-tree users adjusted.
+
+---
+
+**mandatory**
+
+If ->rename() update of .. on cross-directory move needs an exclusion with
+directory modifications, do *not* lock the subdirectory in question in your
+->rename() - it's done by the caller now [that item should've been added in
+28eceeda130f "fs: Lock moved directories"].
+
+---
+
+**mandatory**
+
+On same-directory ->rename() the (tautological) update of .. is not protected
+by any locks; just don't do it if the old parent is the same as the new one.
+We really can't lock two subdirectories in same-directory rename - not without
+deadlocks.
diff --git linux-libre-5.15-gnu/Documentation/filesystems/vfs.rst linux-libre-5.15.187-gnu/Documentation/filesystems/vfs.rst
index bf5c48066fac..a15527940b46 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-5.15.187-gnu/Documentation/filesystems/vfs.rst
@@ -274,6 +274,9 @@ or bottom half).
 	This is specifically for the inode itself being marked dirty,
 	not its data.  If the update needs to be persisted by fdatasync(),
 	then I_DIRTY_DATASYNC will be set in the flags argument.
+	I_DIRTY_TIME will be set in the flags in case lazytime is enabled
+	and struct inode has times updated since the last ->dirty_inode
+	call.
 
 ``write_inode``
 	this method is called when the VFS needs to write an inode to
@@ -1207,7 +1210,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/apei/einj.rst linux-libre-5.15.187-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
index c042176e1707..50ac87fa2295 100644
--- linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
+++ linux-libre-5.15.187-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -168,7 +168,7 @@ An error injection example::
   0x00000008	Memory Correctable
   0x00000010	Memory Uncorrectable non-fatal
   # echo 0x12345000 > param1		# Set memory address for injection
-  # echo $((-1 << 12)) > param2		# Mask 0xfffffffffffff000 - anywhere in this page
+  # echo 0xfffffffffffff000 > param2		# Mask - anywhere in this page
   # echo 0x8 > error_type			# Choose correctable memory error
   # echo 1 > error_inject			# Inject now
 
diff --git linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.15.187-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index b7ad47df49de..8b65b32e6e40 100644
--- linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.15.187-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.15-gnu/Documentation/gpu/i915.rst linux-libre-5.15.187-gnu/Documentation/gpu/i915.rst
index 204ebdaadb45..03021dfa0dd8 100644
--- linux-libre-5.15-gnu/Documentation/gpu/i915.rst
+++ linux-libre-5.15.187-gnu/Documentation/gpu/i915.rst
@@ -183,25 +183,25 @@ Frame Buffer Compression (FBC)
 Display Refresh Rate Switching (DRRS)
 -------------------------------------
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :doc: Display Refresh Rate Switching (DRRS)
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_dp_set_drrs_state
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_enable
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_disable
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_invalidate
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_flush
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_dp_drrs_init
 
 DPIO
diff --git linux-libre-5.15-gnu/Documentation/gpu/todo.rst linux-libre-5.15.187-gnu/Documentation/gpu/todo.rst
index 12e61869939e..67de1e94fdf7 100644
--- linux-libre-5.15-gnu/Documentation/gpu/todo.rst
+++ linux-libre-5.15.187-gnu/Documentation/gpu/todo.rst
@@ -311,27 +311,6 @@ Contact: Daniel Vetter, Noralf Tronnes
 
 Level: Advanced
 
-Garbage collect fbdev scrolling acceleration
---------------------------------------------
-
-Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode =
-SCROLL_REDRAW. There's a ton of code this will allow us to remove:
-
-- lots of code in fbcon.c
-
-- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called
-  directly instead of the function table (with a switch on p->rotate)
-
-- fb_copyarea is unused after this, and can be deleted from all drivers
-
-Note that not all acceleration code can be deleted, since clearing and cursor
-support is still accelerated, which might be good candidates for further
-deletion projects.
-
-Contact: Daniel Vetter
-
-Level: Intermediate
-
 idr_init_base()
 ---------------
 
diff --git linux-libre-5.15-gnu/Documentation/hwmon/ftsteutates.rst linux-libre-5.15.187-gnu/Documentation/hwmon/ftsteutates.rst
index 58a2483d8d0d..198fa8e2819d 100644
--- linux-libre-5.15-gnu/Documentation/hwmon/ftsteutates.rst
+++ linux-libre-5.15.187-gnu/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 8 fans. It also contains an integrated watchdog which is currently
 implemented in this driver.
 
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
 To clear a temperature or fan alarm, execute the following command with the
 correct path to the alarm file::
 
diff --git linux-libre-5.15-gnu/Documentation/hwmon/lm90.rst linux-libre-5.15.187-gnu/Documentation/hwmon/lm90.rst
index 3da8c6e06a36..05391fb4042d 100644
--- linux-libre-5.15-gnu/Documentation/hwmon/lm90.rst
+++ linux-libre-5.15.187-gnu/Documentation/hwmon/lm90.rst
@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
diff --git linux-libre-5.15-gnu/Documentation/input/joydev/joystick.rst linux-libre-5.15.187-gnu/Documentation/input/joydev/joystick.rst
index f615906a0821..6d721396717a 100644
--- linux-libre-5.15-gnu/Documentation/input/joydev/joystick.rst
+++ linux-libre-5.15.187-gnu/Documentation/input/joydev/joystick.rst
@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
 * AVB Mag Turbo Force
 * AVB Top Shot Pegasus
 * AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
 * Logitech WingMan Force
 * Logitech WingMan Force Wheel
 * Guillemot Race Leader Force Feedback
diff --git linux-libre-5.15-gnu/Documentation/kbuild/kconfig.rst linux-libre-5.15.187-gnu/Documentation/kbuild/kconfig.rst
index 5967c79c3baa..eee0d298774a 100644
--- linux-libre-5.15-gnu/Documentation/kbuild/kconfig.rst
+++ linux-libre-5.15.187-gnu/Documentation/kbuild/kconfig.rst
@@ -54,6 +54,15 @@ KCONFIG_OVERWRITECONFIG
 If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
 break symlinks when .config is a symlink to somewhere else.
 
+KCONFIG_WARN_UNKNOWN_SYMBOLS
+----------------------------
+This environment variable makes Kconfig warn about all unrecognized
+symbols in the config input.
+
+KCONFIG_WERROR
+--------------
+If set, Kconfig treats warnings as errors.
+
 `CONFIG_`
 ---------
 If you set `CONFIG_` in the environment, Kconfig will prefix all symbols
diff --git linux-libre-5.15-gnu/Documentation/kernel-hacking/locking.rst linux-libre-5.15.187-gnu/Documentation/kernel-hacking/locking.rst
index 90bc3f51eda9..d431718921b7 100644
--- linux-libre-5.15-gnu/Documentation/kernel-hacking/locking.rst
+++ linux-libre-5.15.187-gnu/Documentation/kernel-hacking/locking.rst
@@ -1352,7 +1352,7 @@ Mutex API reference
 Futex API reference
 ===================
 
-.. kernel-doc:: kernel/futex.c
+.. kernel-doc:: kernel/futex/core.c
    :internal:
 
 Further reading
diff --git linux-libre-5.15-gnu/Documentation/locking/hwspinlock.rst linux-libre-5.15.187-gnu/Documentation/locking/hwspinlock.rst
index 6f03713b7003..2ffaa3cbd63f 100644
--- linux-libre-5.15-gnu/Documentation/locking/hwspinlock.rst
+++ linux-libre-5.15.187-gnu/Documentation/locking/hwspinlock.rst
@@ -85,6 +85,17 @@ is already free).
 
 Should be called from a process context (might sleep).
 
+::
+
+  int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id);
+
+After verifying the owner of the hwspinlock, release a previously acquired
+hwspinlock; returns 0 on success, or an appropriate error code on failure
+(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific
+hwspinlock).
+
+Should be called from a process context (might sleep).
+
 ::
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
diff --git linux-libre-5.15-gnu/Documentation/locking/locktypes.rst linux-libre-5.15.187-gnu/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- linux-libre-5.15-gnu/Documentation/locking/locktypes.rst
+++ linux-libre-5.15.187-gnu/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git linux-libre-5.15-gnu/Documentation/locking/seqlock.rst linux-libre-5.15.187-gnu/Documentation/locking/seqlock.rst
index 64405e5da63e..60d808d6ed76 100644
--- linux-libre-5.15-gnu/Documentation/locking/seqlock.rst
+++ linux-libre-5.15.187-gnu/Documentation/locking/seqlock.rst
@@ -153,7 +153,7 @@ Use seqcount_latch_t when the write side sections cannot be protected
 from interruption by readers. This is typically the case when the read
 side can be invoked from NMI handlers.
 
-Check `raw_write_seqcount_latch()` for more information.
+Check `write_seqcount_latch()` for more information.
 
 
 .. _seqlock_t:
diff --git linux-libre-5.15-gnu/Documentation/networking/af_xdp.rst linux-libre-5.15.187-gnu/Documentation/networking/af_xdp.rst
index 60b217b436be..5b77b9e5ac7e 100644
--- linux-libre-5.15-gnu/Documentation/networking/af_xdp.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/af_xdp.rst
@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
 application to use. The final option is the flags field, but it will
 be dealt with in separate sections for each UMEM flag.
 
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
 XDP_STATISTICS getsockopt
 -------------------------
 
diff --git linux-libre-5.15-gnu/Documentation/networking/bonding.rst linux-libre-5.15.187-gnu/Documentation/networking/bonding.rst
index 31cfd7d674a6..ab98373535ea 100644
--- linux-libre-5.15-gnu/Documentation/networking/bonding.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
@@ -421,6 +422,17 @@ arp_all_targets
 		consider the slave up only when all of the arp_ip_targets
 		are reachable
 
+arp_missed_max
+
+	Specifies the number of arp_interval monitor checks that must
+	fail in order for an interface to be marked down by the ARP monitor.
+
+	In order to provide orderly failover semantics, backup interfaces
+	are permitted an extra monitor check (i.e., they must fail
+	arp_missed_max + 1 times before being marked down).
+
+	The default value is 2, and the allowable range is 1 - 255.
+
 downdelay
 
 	Specifies the time, in milliseconds, to wait before disabling
diff --git linux-libre-5.15-gnu/Documentation/networking/decnet.rst linux-libre-5.15.187-gnu/Documentation/networking/decnet.rst
deleted file mode 100644
index b8bc11ff8370..000000000000
--- linux-libre-5.15-gnu/Documentation/networking/decnet.rst
+++ /dev/null
@@ -1,243 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=========================================
-Linux DECnet Networking Layer Information
-=========================================
-
-1. Other documentation....
-==========================
-
-   - Project Home Pages
-     - http://www.chygwyn.com/				   - Kernel info
-     - http://linux-decnet.sourceforge.net/                - Userland tools
-     - http://www.sourceforge.net/projects/linux-decnet/   - Status page
-
-2. Configuring the kernel
-=========================
-
-Be sure to turn on the following options:
-
-    - CONFIG_DECNET (obviously)
-    - CONFIG_PROC_FS (to see what's going on)
-    - CONFIG_SYSCTL (for easy configuration)
-
-if you want to try out router support (not properly debugged yet)
-you'll need the following options as well...
-
-    - CONFIG_DECNET_ROUTER (to be able to add/delete routes)
-    - CONFIG_NETFILTER (will be required for the DECnet routing daemon)
-
-Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
-that you need it, in general you won't and it can cause ifconfig to
-malfunction.
-
-Run time configuration has changed slightly from the 2.4 system. If you
-want to configure an endnode, then the simplified procedure is as follows:
-
- - Set the MAC address on your ethernet card before starting _any_ other
-   network protocols.
-
-As soon as your network card is brought into the UP state, DECnet should
-start working. If you need something more complicated or are unsure how
-to set the MAC address, see the next section. Also all configurations which
-worked with 2.4 will work under 2.5 with no change.
-
-3. Command line options
-=======================
-
-You can set a DECnet address on the kernel command line for compatibility
-with the 2.4 configuration procedure, but in general it's not needed any more.
-If you do st a DECnet address on the command line, it has only one purpose
-which is that its added to the addresses on the loopback device.
-
-With 2.4 kernels, DECnet would only recognise addresses as local if they
-were added to the loopback device. In 2.5, any local interface address
-can be used to loop back to the local machine. Of course this does not
-prevent you adding further addresses to the loopback device if you
-want to.
-
-N.B. Since the address list of an interface determines the addresses for
-which "hello" messages are sent, if you don't set an address on the loopback
-interface then you won't see any entries in /proc/net/neigh for the local
-host until such time as you start a connection. This doesn't affect the
-operation of the local communications in any other way though.
-
-The kernel command line takes options looking like the following::
-
-    decnet.addr=1,2
-
-the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
-and early 2.3.xx kernels, you must use a comma when specifying the
-DECnet address like this. For more recent 2.3.xx kernels, you may
-use almost any character except space, although a `.` would be the most
-obvious choice :-)
-
-There used to be a third number specifying the node type. This option
-has gone away in favour of a per interface node type. This is now set
-using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
-set with a single digit, 0=EndNode, 1=L1 Router and  2=L2 Router.
-
-There are also equivalent options for modules. The node address can
-also be set through the /proc/sys/net/decnet/ files, as can other system
-parameters.
-
-Currently the only supported devices are ethernet and ip_gre. The
-ethernet address of your ethernet card has to be set according to the DECnet
-address of the node in order for it to be autoconfigured (and then appear in
-/proc/net/decnet_dev). There is a utility available at the above
-FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before or
-at the time the device is brought up. If you are using RedHat you can
-add the line::
-
-    MACADDR=AA:00:04:00:03:04
-
-or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or
-wherever your network card's configuration lives. Setting the MAC address
-of your ethernet card to an address starting with "hi-ord" will cause a
-DECnet address which matches to be added to the interface (which you can
-verify with iproute2).
-
-The default device for routing can be set through the /proc filesystem
-by setting /proc/sys/net/decnet/default_device to the
-device you want DECnet to route packets out of when no specific route
-is available. Usually this will be eth0, for example::
-
-    echo -n "eth0" >/proc/sys/net/decnet/default_device
-
-If you don't set the default device, then it will default to the first
-ethernet card which has been autoconfigured as described above. You can
-confirm that by looking in the default_device file of course.
-
-There is a list of what the other files under /proc/sys/net/decnet/ do
-on the kernel patch web site (shown above).
-
-4. Run time kernel configuration
-================================
-
-
-This is either done through the sysctl/proc interface (see the kernel web
-pages for details on what the various options do) or through the iproute2
-package in the same way as IPv4/6 configuration is performed.
-
-Documentation for iproute2 is included with the package, although there is
-as yet no specific section on DECnet, most of the features apply to both
-IP and DECnet, albeit with DECnet addresses instead of IP addresses and
-a reduced functionality.
-
-If you want to configure a DECnet router you'll need the iproute2 package
-since its the _only_ way to add and delete routes currently. Eventually
-there will be a routing daemon to send and receive routing messages for
-each interface and update the kernel routing tables accordingly. The
-routing daemon will use netfilter to listen to routing packets, and
-rtnetlink to update the kernels routing tables.
-
-The DECnet raw socket layer has been removed since it was there purely
-for use by the routing daemon which will now use netfilter (a much cleaner
-and more generic solution) instead.
-
-5. How can I tell if its working?
-=================================
-
-Here is a quick guide of what to look for in order to know if your DECnet
-kernel subsystem is working.
-
-   - Is the node address set (see /proc/sys/net/decnet/node_address)
-   - Is the node of the correct type
-     (see /proc/sys/net/decnet/conf/<dev>/forwarding)
-   - Is the Ethernet MAC address of each Ethernet card set to match
-     the DECnet address. If in doubt use the dn2ethaddr utility available
-     at the ftp archive.
-   - If the previous two steps are satisfied, and the Ethernet card is up,
-     you should find that it is listed in /proc/net/decnet_dev and also
-     that it appears as a directory in /proc/sys/net/decnet/conf/. The
-     loopback device (lo) should also appear and is required to communicate
-     within a node.
-   - If you have any DECnet routers on your network, they should appear
-     in /proc/net/decnet_neigh, otherwise this file will only contain the
-     entry for the node itself (if it doesn't check to see if lo is up).
-   - If you want to send to any node which is not listed in the
-     /proc/net/decnet_neigh file, you'll need to set the default device
-     to point to an Ethernet card with connection to a router. This is
-     again done with the /proc/sys/net/decnet/default_device file.
-   - Try starting a simple server and client, like the dnping/dnmirror
-     over the loopback interface. With luck they should communicate.
-     For this step and those after, you'll need the DECnet library
-     which can be obtained from the above ftp sites as well as the
-     actual utilities themselves.
-   - If this seems to work, then try talking to a node on your local
-     network, and see if you can obtain the same results.
-   - At this point you are on your own... :-)
-
-6. How to send a bug report
-===========================
-
-If you've found a bug and want to report it, then there are several things
-you can do to help me work out exactly what it is that is wrong. Useful
-information (_most_ of which _is_ _essential_) includes:
-
- - What kernel version are you running ?
- - What version of the patch are you running ?
- - How far though the above set of tests can you get ?
- - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ?
- - Which services are you running ?
- - Which client caused the problem ?
- - How much data was being transferred ?
- - Was the network congested ?
- - How can the problem be reproduced ?
- - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of
-   tcpdump don't understand how to dump DECnet properly, so including
-   the hex listing of the packet contents is _essential_, usually the -x flag.
-   You may also need to increase the length grabbed with the -s flag. The
-   -e flag also provides very useful information (ethernet MAC addresses))
-
-7. MAC FAQ
-==========
-
-A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet
-interact and how to get the best performance from your hardware.
-
-Ethernet cards are designed to normally only pass received network frames
-to a host computer when they are addressed to it, or to the broadcast address.
-
-Linux has an interface which allows the setting of extra addresses for
-an ethernet card to listen to. If the ethernet card supports it, the
-filtering operation will be done in hardware, if not the extra unwanted packets
-received will be discarded by the host computer. In the latter case,
-significant processor time and bus bandwidth can be used up on a busy
-network (see the NAPI documentation for a longer explanation of these
-effects).
-
-DECnet makes use of this interface to allow running DECnet on an ethernet
-card which has already been configured using TCP/IP (presumably using the
-built in MAC address of the card, as usual) and/or to allow multiple DECnet
-addresses on each physical interface. If you do this, be aware that if your
-ethernet card doesn't support perfect hashing in its MAC address filter
-then your computer will be doing more work than required. Some cards
-will simply set themselves into promiscuous mode in order to receive
-packets from the DECnet specified addresses. So if you have one of these
-cards its better to set the MAC address of the card as described above
-to gain the best efficiency. Better still is to use a card which supports
-NAPI as well.
-
-
-8. Mailing list
-===============
-
-If you are keen to get involved in development, or want to ask questions
-about configuration, or even just report bugs, then there is a mailing
-list that you can join, details are at:
-
-http://sourceforge.net/mail/?group_id=4993
-
-9. Legal Info
-=============
-
-The Linux DECnet project team have placed their code under the GPL. The
-software is provided "as is" and without warranty express or implied.
-DECnet is a trademark of Compaq. This software is not a product of
-Compaq. We acknowledge the help of people at Compaq in providing extra
-documentation above and beyond what was previously publicly available.
-
-Steve Whitehouse <SteveW@ACM.org>
-
diff --git linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst linux-libre-5.15.187-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index 01b2a69b0cb0..a8a2aa2ae897 100644
--- linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -205,6 +205,7 @@ Adaptive coalescing can be switched on/off through `ethtool(8)`'s
 More information about Adaptive Interrupt Moderation (DIM) can be found in
 Documentation/networking/net_dim.rst
 
+.. _`RX copybreak`:
 RX copybreak
 ============
 The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
@@ -315,3 +316,34 @@ Rx
 - The new SKB is updated with the necessary information (protocol,
   checksum hw verify result, etc), and then passed to the network
   stack, using the NAPI interface function :code:`napi_gro_receive()`.
+
+Dynamic RX Buffers (DRB)
+------------------------
+
+Each RX descriptor in the RX ring is a single memory page (which is either 4KB
+or 16KB long depending on system's configurations).
+To reduce the memory allocations required when dealing with a high rate of small
+packets, the driver tries to reuse the remaining RX descriptor's space if more
+than 2KB of this page remain unused.
+
+A simple example of this mechanism is the following sequence of events:
+
+::
+
+        1. Driver allocates page-sized RX buffer and passes it to hardware
+                +----------------------+
+                |4KB RX Buffer         |
+                +----------------------+
+
+        2. A 300Bytes packet is received on this buffer
+
+        3. The driver increases the ref count on this page and returns it back to
+           HW as an RX buffer of size 4KB - 300Bytes = 3796 Bytes
+               +----+--------------------+
+               |****|3796 Bytes RX Buffer|
+               +----+--------------------+
+
+This mechanism isn't used when an XDP program is loaded, or when the
+RX packet is less than rx_copybreak bytes (in which case the packet is
+copied out of the RX buffer into the linear part of a new skb allocated
+for it and the RX buffer remains the same size, see `RX copybreak`_).
diff --git linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst linux-libre-5.15.187-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git linux-libre-5.15-gnu/Documentation/networking/index.rst linux-libre-5.15.187-gnu/Documentation/networking/index.rst
index 58bc8cd367c6..fdfc73d4c90a 100644
--- linux-libre-5.15-gnu/Documentation/networking/index.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/index.rst
@@ -46,7 +46,6 @@ Contents:
    cdc_mbim
    dccp
    dctcp
-   decnet
    dns_resolver
    driver
    eql
diff --git linux-libre-5.15-gnu/Documentation/networking/ip-sysctl.rst linux-libre-5.15.187-gnu/Documentation/networking/ip-sysctl.rst
index d91ab28718d4..7f75767a24f1 100644
--- linux-libre-5.15-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/ip-sysctl.rst
@@ -322,6 +322,8 @@ tcp_app_win - INTEGER
 	Reserve max(window/2^tcp_app_win, mss) of window for application
 	buffer. Value 0 is special, it means that nothing is reserved.
 
+	Possible values are [0, 31], inclusive.
+
 	Default: 31
 
 tcp_autocorking - BOOLEAN
@@ -1063,7 +1065,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -1157,7 +1159,7 @@ ip_autobind_reuse - BOOLEAN
 	option should only be set by experts.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
@@ -2068,6 +2070,14 @@ accept_ra_min_hop_limit - INTEGER
 
 	Default: 1
 
+accept_ra_min_lft - INTEGER
+	Minimum acceptable lifetime value in Router Advertisement.
+
+	RA sections with a lifetime less than this value shall be
+	ignored. Zero lifetimes stay unaffected.
+
+	Default: 0
+
 accept_ra_pinfo - BOOLEAN
 	Learn Prefix Information in Router Advertisement.
 
@@ -2808,7 +2818,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
diff --git linux-libre-5.15-gnu/Documentation/networking/ipvs-sysctl.rst linux-libre-5.15.187-gnu/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..1cfbf1add2fc 100644
--- linux-libre-5.15-gnu/Documentation/networking/ipvs-sysctl.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.15-gnu/Documentation/networking/j1939.rst linux-libre-5.15.187-gnu/Documentation/networking/j1939.rst
index b705d2801e9c..80b1c5e19fd5 100644
--- linux-libre-5.15-gnu/Documentation/networking/j1939.rst
+++ linux-libre-5.15.187-gnu/Documentation/networking/j1939.rst
@@ -121,7 +121,7 @@ format, the Group Extension is set in the PS-field.
 
 On the other hand, when using PDU1 format, the PS-field contains a so-called
 Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU1 format is used, the PS-field
 of the PGN shall be set to zero. The Destination Address shall be set
 elsewhere.
 
diff --git linux-libre-5.15-gnu/Documentation/power/runtime_pm.rst linux-libre-5.15.187-gnu/Documentation/power/runtime_pm.rst
index d6bf84f061f4..921f56dffea7 100644
--- linux-libre-5.15-gnu/Documentation/power/runtime_pm.rst
+++ linux-libre-5.15.187-gnu/Documentation/power/runtime_pm.rst
@@ -341,7 +341,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
   `int pm_runtime_resume_and_get(struct device *dev);`
     - run pm_runtime_resume(dev) and if successful, increment the device's
-      usage counter; return the result of pm_runtime_resume
+      usage counter; returns 0 on success (whether or not the device's
+      runtime PM status was already 'active') or the error code from
+      pm_runtime_resume() on failure.
 
   `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
diff --git linux-libre-5.15-gnu/Documentation/process/code-of-conduct-interpretation.rst linux-libre-5.15.187-gnu/Documentation/process/code-of-conduct-interpretation.rst
index e899f14a4ba2..43da2cc2e3b9 100644
--- linux-libre-5.15-gnu/Documentation/process/code-of-conduct-interpretation.rst
+++ linux-libre-5.15.187-gnu/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the
diff --git linux-libre-5.15-gnu/Documentation/process/deprecated.rst linux-libre-5.15.187-gnu/Documentation/process/deprecated.rst
index 8ced754a5a0f..f3484f60eae5 100644
--- linux-libre-5.15-gnu/Documentation/process/deprecated.rst
+++ linux-libre-5.15.187-gnu/Documentation/process/deprecated.rst
@@ -70,6 +70,9 @@ Instead, the 2-factor form of the allocator should be used::
 
 	foo = kmalloc_array(count, size, GFP_KERNEL);
 
+Specifically, kmalloc() can be replaced with kmalloc_array(), and
+kzalloc() can be replaced with kcalloc().
+
 If no 2-factor form is available, the saturate-on-overflow helpers should
 be used::
 
@@ -90,9 +93,20 @@ Instead, use the helper::
         array usage and switch to a `flexible array member
         <#zero-length-and-one-element-arrays>`_ instead.
 
-See array_size(), array3_size(), and struct_size(),
-for more details as well as the related check_add_overflow() and
-check_mul_overflow() family of functions.
+For other calculations, please compose the use of the size_mul(),
+size_add(), and size_sub() helpers. For example, in the case of::
+
+	foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL);
+
+Instead, use the helpers::
+
+	foo = krealloc(size_add(current_size,
+				size_mul(chunk_size,
+					 size_sub(count, 3))), GFP_KERNEL);
+
+For more details, also see array3_size() and flex_array_size(),
+as well as the related check_mul_overflow(), check_add_overflow(),
+check_sub_overflow(), and check_shl_overflow() family of functions.
 
 simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull()
 ----------------------------------------------------------------------
diff --git linux-libre-5.15-gnu/Documentation/process/howto.rst linux-libre-5.15.187-gnu/Documentation/process/howto.rst
index e4beeca57e5f..12a4e7ebcbab 100644
--- linux-libre-5.15-gnu/Documentation/process/howto.rst
+++ linux-libre-5.15.187-gnu/Documentation/process/howto.rst
@@ -36,7 +36,7 @@ experience, the following books are good for, if anything, reference:
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
 
 The kernel is written using GNU C and the GNU toolchain.  While it
-adheres to the ISO C89 standard, it uses a number of extensions that are
+adheres to the ISO C11 standard, it uses a number of extensions that are
 not featured in the standard.  The kernel is a freestanding C
 environment, with no reliance on the standard C library, so some
 portions of the C standard are not supported.  Arbitrary long long
diff --git linux-libre-5.15-gnu/Documentation/process/stable-kernel-rules.rst linux-libre-5.15.187-gnu/Documentation/process/stable-kernel-rules.rst
index 003c865e9c21..fbcb48bc2a90 100644
--- linux-libre-5.15-gnu/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.15.187-gnu/Documentation/process/stable-kernel-rules.rst
@@ -168,7 +168,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee
diff --git linux-libre-5.15-gnu/Documentation/process/submitting-patches.rst linux-libre-5.15.187-gnu/Documentation/process/submitting-patches.rst
index 8ad6b93f91e6..025272139539 100644
--- linux-libre-5.15-gnu/Documentation/process/submitting-patches.rst
+++ linux-libre-5.15.187-gnu/Documentation/process/submitting-patches.rst
@@ -72,7 +72,7 @@ as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
diff --git linux-libre-5.15-gnu/Documentation/riscv/vm-layout.rst linux-libre-5.15.187-gnu/Documentation/riscv/vm-layout.rst
index b7f98930d38d..a2ec11da38b0 100644
--- linux-libre-5.15-gnu/Documentation/riscv/vm-layout.rst
+++ linux-libre-5.15.187-gnu/Documentation/riscv/vm-layout.rst
@@ -48,7 +48,7 @@ RISC-V Linux Kernel SV39
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
    ffffffc000000000 | -256    GB | ffffffc7ffffffff |   32 GB | kasan
-   ffffffcefee00000 | -196    GB | ffffffcefeffffff |    2 MB | fixmap
+   ffffffcefea00000 | -196    GB | ffffffcefeffffff |    6 MB | fixmap
    ffffffceff000000 | -196    GB | ffffffceffffffff |   16 MB | PCI io
    ffffffcf00000000 | -196    GB | ffffffcfffffffff |    4 GB | vmemmap
    ffffffd000000000 | -192    GB | ffffffdfffffffff |   64 GB | vmalloc/ioremap space
diff --git linux-libre-5.15-gnu/Documentation/scsi/libsas.rst linux-libre-5.15.187-gnu/Documentation/scsi/libsas.rst
index 6589dfefbc02..305a253d5c3b 100644
--- linux-libre-5.15-gnu/Documentation/scsi/libsas.rst
+++ linux-libre-5.15.187-gnu/Documentation/scsi/libsas.rst
@@ -207,7 +207,6 @@ Management Functions (TMFs) described in SAM::
 	/* Task Management Functions. Must be called from process context. */
 	int (*lldd_abort_task)(struct sas_task *);
 	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
-	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
 	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
 	int (*lldd_I_T_nexus_reset)(struct domain_device *);
 	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
@@ -262,7 +261,6 @@ can look like this (called last thing from probe())
 
 	    my_ha->sas_ha.lldd_abort_task     = my_abort_task;
 	    my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
-	    my_ha->sas_ha.lldd_clear_aca      = my_clear_aca;
 	    my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
 	    my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
 	    my_ha->sas_ha.lldd_lu_reset       = my_lu_reset;
diff --git linux-libre-5.15-gnu/Documentation/scsi/scsi_mid_low_api.rst linux-libre-5.15.187-gnu/Documentation/scsi/scsi_mid_low_api.rst
index 63ddea2b9640..7c06e7fb9a31 100644
--- linux-libre-5.15-gnu/Documentation/scsi/scsi_mid_low_api.rst
+++ linux-libre-5.15.187-gnu/Documentation/scsi/scsi_mid_low_api.rst
@@ -1190,11 +1190,11 @@ Members of interest:
 		 - pointer to scsi_device object that this command is
                    associated with.
     resid
-		 - an LLD should set this signed integer to the requested
+		 - an LLD should set this unsigned integer to the requested
                    transfer length (i.e. 'request_bufflen') less the number
                    of bytes that are actually transferred. 'resid' is
                    preset to 0 so an LLD can ignore it if it cannot detect
-                   underruns (overruns should be rare). If possible an LLD
+                   underruns (overruns should not be reported). An LLD
                    should set 'resid' prior to invoking 'done'. The most
                    interesting case is data transfers from a SCSI target
                    device (e.g. READs) that underrun.
diff --git linux-libre-5.15-gnu/Documentation/security/keys/trusted-encrypted.rst linux-libre-5.15.187-gnu/Documentation/security/keys/trusted-encrypted.rst
index 80d5a5af62a1..99cf34d7c025 100644
--- linux-libre-5.15-gnu/Documentation/security/keys/trusted-encrypted.rst
+++ linux-libre-5.15.187-gnu/Documentation/security/keys/trusted-encrypted.rst
@@ -87,22 +87,26 @@ Key Generation
 Trusted Keys
 ------------
 
-New keys are created from random numbers generated in the trust source. They
-are encrypted/decrypted using a child key in the storage key hierarchy.
-Encryption and decryption of the child key must be protected by a strong
-access control policy within the trust source.
+New keys are created from random numbers. They are encrypted/decrypted using
+a child key in the storage key hierarchy. Encryption and decryption of the
+child key must be protected by a strong access control policy within the
+trust source. The random number generator in use differs according to the
+selected trust source:
 
-  *  TPM (hardware device) based RNG
+  *  TPM: hardware device based RNG
 
-     Strength of random numbers may vary from one device manufacturer to
-     another.
+     Keys are generated within the TPM. Strength of random numbers may vary
+     from one device manufacturer to another.
 
-  *  TEE (OP-TEE based on Arm TrustZone) based RNG
+  *  TEE: OP-TEE based on Arm TrustZone based RNG
 
      RNG is customizable as per platform needs. It can either be direct output
      from platform specific hardware RNG or a software based Fortuna CSPRNG
      which can be seeded via multiple entropy sources.
 
+Users may override this by specifying ``trusted.rng=kernel`` on the kernel
+command-line to override the used RNG with the kernel's random number pool.
+
 Encrypted Keys
 --------------
 
diff --git linux-libre-5.15-gnu/Documentation/sound/alsa-configuration.rst linux-libre-5.15.187-gnu/Documentation/sound/alsa-configuration.rst
index bfeb14de6489..9b5351079a23 100644
--- linux-libre-5.15-gnu/Documentation/sound/alsa-configuration.rst
+++ linux-libre-5.15.187-gnu/Documentation/sound/alsa-configuration.rst
@@ -2237,7 +2237,7 @@ implicit_fb
     Apply the generic implicit feedback sync mode.  When this is set
     and the playback stream sync mode is ASYNC, the driver tries to
     tie an adjacent ASYNC capture stream as the implicit feedback
-    source.
+    source.  This is equivalent with quirk_flags bit 17.
 use_vmalloc
     Use vmalloc() for allocations of the PCM buffers (default: yes).
     For architectures with non-coherent memory like ARM or MIPS, the
@@ -2279,6 +2279,8 @@ quirk_flags
         * bit 14: Ignore errors for mixer access
         * bit 15: Support generic DSD raw U32_BE format
         * bit 16: Set up the interface at first like UAC1
+        * bit 17: Apply the generic implicit feedback sync mode
+        * bit 18: Don't apply implicit feedback sync mode
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git linux-libre-5.15-gnu/Documentation/sound/hd-audio/models.rst linux-libre-5.15.187-gnu/Documentation/sound/hd-audio/models.rst
index 0ea967d34583..120430450014 100644
--- linux-libre-5.15-gnu/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.15.187-gnu/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
@@ -326,6 +330,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======
@@ -698,7 +704,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
diff --git linux-libre-5.15-gnu/Documentation/sound/soc/dapm.rst linux-libre-5.15.187-gnu/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- linux-libre-5.15-gnu/Documentation/sound/soc/dapm.rst
+++ linux-libre-5.15.187-gnu/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.
 
diff --git linux-libre-5.15-gnu/Documentation/sphinx/kernel_include.py linux-libre-5.15.187-gnu/Documentation/sphinx/kernel_include.py
index f523aa68a36b..cf601bd058ab 100755
--- linux-libre-5.15-gnu/Documentation/sphinx/kernel_include.py
+++ linux-libre-5.15.187-gnu/Documentation/sphinx/kernel_include.py
@@ -94,7 +94,6 @@ class KernelInclude(Include):
         # HINT: this is the only line I had to change / commented out:
         #path = utils.relative_path(None, path)
 
-        path = nodes.reprunicode(path)
         encoding = self.options.get(
             'encoding', self.state.document.settings.input_encoding)
         e_handler=self.state.document.settings.input_encoding_error_handler
diff --git linux-libre-5.15-gnu/Documentation/sphinx/load_config.py linux-libre-5.15.187-gnu/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-5.15-gnu/Documentation/sphinx/load_config.py
+++ linux-libre-5.15.187-gnu/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-5.15-gnu/Documentation/sphinx/requirements.txt linux-libre-5.15.187-gnu/Documentation/sphinx/requirements.txt
index 9a35f50798a6..2c573541ab71 100644
--- linux-libre-5.15-gnu/Documentation/sphinx/requirements.txt
+++ linux-libre-5.15.187-gnu/Documentation/sphinx/requirements.txt
@@ -1,2 +1,4 @@
+# jinja2>=3.1 is not compatible with Sphinx<4.0
+jinja2<3.1
 sphinx_rtd_theme
 Sphinx==2.4.4
diff --git linux-libre-5.15-gnu/Documentation/timers/no_hz.rst linux-libre-5.15.187-gnu/Documentation/timers/no_hz.rst
index 6cadad7c3aad..3e52928a9dfb 100644
--- linux-libre-5.15-gnu/Documentation/timers/no_hz.rst
+++ linux-libre-5.15.187-gnu/Documentation/timers/no_hz.rst
@@ -129,11 +129,8 @@ adaptive-tick CPUs:  At least one non-adaptive-tick CPU must remain
 online to handle timekeeping tasks in order to ensure that system
 calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
 (This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
-user processes to observe slight drifts in clock rate.)  Therefore, the
-boot CPU is prohibited from entering adaptive-ticks mode.  Specifying a
-"nohz_full=" mask that includes the boot CPU will result in a boot-time
-error message, and the boot CPU will be removed from the mask.  Note that
-this means that your system must have at least two CPUs in order for
+user processes to observe slight drifts in clock rate.) Note that this
+means that your system must have at least two CPUs in order for
 CONFIG_NO_HZ_FULL=y to do anything for you.
 
 Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
diff --git linux-libre-5.15-gnu/Documentation/trace/coresight/coresight-config.rst linux-libre-5.15.187-gnu/Documentation/trace/coresight/coresight-config.rst
index a4e3ef295240..6ed13398ca2c 100644
--- linux-libre-5.15-gnu/Documentation/trace/coresight/coresight-config.rst
+++ linux-libre-5.15.187-gnu/Documentation/trace/coresight/coresight-config.rst
@@ -211,19 +211,13 @@ also declared in the perf 'cs_etm' event infrastructure so that they can
 be selected when running trace under perf::
 
     $ ls /sys/devices/cs_etm
-    configurations  format  perf_event_mux_interval_ms  sinks  type
-    events  nr_addr_filters  power
+    cpu0  cpu2  events  nr_addr_filters		power  subsystem  uevent
+    cpu1  cpu3  format  perf_event_mux_interval_ms	sinks  type
 
-Key directories here are 'configurations' - which lists the loaded
-configurations, and 'events' - a generic perf directory which allows
-selection on the perf command line.::
+The key directory here is 'events' - a generic perf directory which allows
+selection on the perf command line. As with the sinks entries, this provides
+a hash of the configuration name.
 
-    $ ls configurations/
-    autofdo
-    $ cat configurations/autofdo
-    0xa7c3dddd
-
-As with the sinks entries, this provides a hash of the configuration name.
 The entry in the 'events' directory uses perfs built in syntax generator
 to substitute the syntax for the name when evaluating the command::
 
diff --git linux-libre-5.15-gnu/Documentation/trace/events.rst linux-libre-5.15.187-gnu/Documentation/trace/events.rst
index 8ddb9b09451c..c47f381d0c00 100644
--- linux-libre-5.15-gnu/Documentation/trace/events.rst
+++ linux-libre-5.15.187-gnu/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 
diff --git linux-libre-5.15-gnu/Documentation/trace/ftrace.rst linux-libre-5.15.187-gnu/Documentation/trace/ftrace.rst
index 4e5b26f03d5b..d036946bce7a 100644
--- linux-libre-5.15-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-5.15.187-gnu/Documentation/trace/ftrace.rst
@@ -2929,7 +2929,7 @@ Produces::
               bash-1994  [000] ....  4342.324898: ima_get_action <-process_measurement
               bash-1994  [000] ....  4342.324898: ima_match_policy <-ima_get_action
               bash-1994  [000] ....  4342.324899: do_truncate <-do_last
-              bash-1994  [000] ....  4342.324899: should_remove_suid <-do_truncate
+              bash-1994  [000] ....  4342.324899: setattr_should_drop_suidgid <-do_truncate
               bash-1994  [000] ....  4342.324899: notify_change <-do_truncate
               bash-1994  [000] ....  4342.324900: current_fs_time <-notify_change
               bash-1994  [000] ....  4342.324900: current_kernel_time <-current_fs_time
diff --git linux-libre-5.15-gnu/Documentation/trace/histogram.rst linux-libre-5.15.187-gnu/Documentation/trace/histogram.rst
index 533415644c54..a78350a8fed4 100644
--- linux-libre-5.15-gnu/Documentation/trace/histogram.rst
+++ linux-libre-5.15.187-gnu/Documentation/trace/histogram.rst
@@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
   will use the event's kernel stacktrace as the key.  The keywords
   'keys' or 'key' can be used to specify keys, and the keywords
   'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
   keyword.  Hashing a compound key produces a unique entry in the
   table for each unique combination of component keys, and can be
   useful for providing more fine-grained summaries of event data.
diff --git linux-libre-5.15-gnu/Documentation/trace/kprobetrace.rst linux-libre-5.15.187-gnu/Documentation/trace/kprobetrace.rst
index b175d88f31eb..15e4bfa2bd83 100644
--- linux-libre-5.15-gnu/Documentation/trace/kprobetrace.rst
+++ linux-libre-5.15.187-gnu/Documentation/trace/kprobetrace.rst
@@ -58,8 +58,8 @@ Synopsis of kprobe_events
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
 		  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
-		  (x8/x16/x32/x64), "string", "ustring" and bitfield
-		  are supported.
+		  (x8/x16/x32/x64), "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
 
   (\*1) only for the probe on function entry (offs == 0).
   (\*2) only for return probe.
@@ -96,6 +96,10 @@ offset, and container-size (usually 32). The syntax is::
 
 Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
 which shows given pointer in "symbol+offset" style.
+On the other hand, symbol-string type ('symstr') converts the given address to
+"symbol+offset/symbolsize" style and stores it as a null-terminated string.
+With 'symstr' type, you can filter the event with wildcard pattern of the
+symbols, and you don't need to solve symbol name by yourself.
 For $comm, the default type is "string"; any other type is invalid.
 
 .. _user_mem_access:
diff --git linux-libre-5.15-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst linux-libre-5.15.187-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst
index 1efb8293bf1f..9d6387e7b083 100644
--- linux-libre-5.15-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ linux-libre-5.15.187-gnu/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -1396,7 +1396,7 @@ Riferimento per l'API dei Mutex
 Riferimento per l'API dei Futex
 ===============================
 
-.. kernel-doc:: kernel/futex.c
+.. kernel-doc:: kernel/futex/core.c
    :internal:
 
 Approfondimenti
diff --git linux-libre-5.15-gnu/Documentation/translations/it_IT/process/howto.rst linux-libre-5.15.187-gnu/Documentation/translations/it_IT/process/howto.rst
index 9554368a2ae2..d02df35d0f6b 100644
--- linux-libre-5.15-gnu/Documentation/translations/it_IT/process/howto.rst
+++ linux-libre-5.15.187-gnu/Documentation/translations/it_IT/process/howto.rst
@@ -44,7 +44,7 @@ altro, utili riferimenti:
 - "C:  A Reference Manual" di Harbison and Steele [Prentice Hall]
 
 Il kernel è stato scritto usando GNU C e la toolchain GNU.
-Sebbene si attenga allo standard ISO C89, esso utilizza una serie di
+Sebbene si attenga allo standard ISO C11, esso utilizza una serie di
 estensioni che non sono previste in questo standard. Il kernel è un
 ambiente C indipendente, che non ha alcuna dipendenza dalle librerie
 C standard, così alcune parti del C standard non sono supportate.
diff --git linux-libre-5.15-gnu/Documentation/translations/ja_JP/howto.rst linux-libre-5.15.187-gnu/Documentation/translations/ja_JP/howto.rst
index d667f9d8a02a..6a00e43868a2 100644
--- linux-libre-5.15-gnu/Documentation/translations/ja_JP/howto.rst
+++ linux-libre-5.15.187-gnu/Documentation/translations/ja_JP/howto.rst
@@ -65,7 +65,7 @@ Linux カーネル開発のやり方
  - 『新・詳説 C 言語 H&S リファレンス』 (サミュエル P ハービソン/ガイ L スティール共著 斉藤 信男監訳)[ソフトバンク]
 
 カーネルは GNU C と GNU ツールチェインを使って書かれています。カーネル
-は ISO C89 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
+は ISO C11 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
 います。カーネルは標準 C ライブラリに依存しない、C 言語非依存環境です。
 そのため、C の標準の中で使えないものもあります。特に任意の long long
 の除算や浮動小数点は使えません。カーネルがツールチェインや C 言語拡張
diff --git linux-libre-5.15-gnu/Documentation/translations/ko_KR/howto.rst linux-libre-5.15.187-gnu/Documentation/translations/ko_KR/howto.rst
index e3cdf0c84892..a787d31dcdbf 100644
--- linux-libre-5.15-gnu/Documentation/translations/ko_KR/howto.rst
+++ linux-libre-5.15.187-gnu/Documentation/translations/ko_KR/howto.rst
@@ -62,7 +62,7 @@ Documentation/process/howto.rst
  - "Practical C Programming" by Steve Oualline [O'Reilly]
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
 
-커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C89 표준을
+커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C11 표준을
 따르는 반면 표준에 있지 않은 많은 확장기능도 가지고 있다. 커널은 표준 C
 라이브러리와는 관계없이 freestanding C 환경이어서 C 표준의 일부는
 지원되지 않는다. 임의의 long long 나누기나 floating point는 지원되지 않는다.
diff --git linux-libre-5.15-gnu/Documentation/translations/zh_CN/process/howto.rst linux-libre-5.15.187-gnu/Documentation/translations/zh_CN/process/howto.rst
index ee3dee476d57..2a910e3e904e 100644
--- linux-libre-5.15-gnu/Documentation/translations/zh_CN/process/howto.rst
+++ linux-libre-5.15.187-gnu/Documentation/translations/zh_CN/process/howto.rst
@@ -45,7 +45,7 @@ Linux内核大部分是由C语言写成的，一些体系结构相关的代码
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
    《C语言参考手册（原书第5版）》（邱仲潘 等译）[机械工业出版社]
 
-Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C89标准，但也用到了一些
+Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C11标准，但也用到了一些
 标准中没有定义的扩展。内核是自给自足的C环境，不依赖于标准C库的支持，所以
 并不支持C标准中的部分定义。比如long long类型的大数除法和浮点运算就不允许
 使用。有时候确实很难弄清楚内核对工具链的要求和它所使用的扩展，不幸的是目
diff --git linux-libre-5.15-gnu/Documentation/translations/zh_TW/process/howto.rst linux-libre-5.15.187-gnu/Documentation/translations/zh_TW/process/howto.rst
index 2043691b92e3..ce14d4ed5c5b 100644
--- linux-libre-5.15-gnu/Documentation/translations/zh_TW/process/howto.rst
+++ linux-libre-5.15.187-gnu/Documentation/translations/zh_TW/process/howto.rst
@@ -48,7 +48,7 @@ Linux內核大部分是由C語言寫成的，一些體系結構相關的代碼
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
    《C語言參考手冊（原書第5版）》（邱仲潘 等譯）[機械工業出版社]
 
-Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C89標準，但也用到了一些
+Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C11標準，但也用到了一些
 標準中沒有定義的擴展。內核是自給自足的C環境，不依賴於標準C庫的支持，所以
 並不支持C標準中的部分定義。比如long long類型的大數除法和浮點運算就不允許
 使用。有時候確實很難弄清楚內核對工具鏈的要求和它所使用的擴展，不幸的是目
diff --git linux-libre-5.15-gnu/Documentation/tty/device_drivers/oxsemi-tornado.rst linux-libre-5.15.187-gnu/Documentation/tty/device_drivers/oxsemi-tornado.rst
new file mode 100644
index 000000000000..0180d8bb0881
--- /dev/null
+++ linux-libre-5.15.187-gnu/Documentation/tty/device_drivers/oxsemi-tornado.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================================================
+Notes on Oxford Semiconductor PCIe (Tornado) 950 serial port devices
+====================================================================
+
+Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven
+by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.
+
+The baud rate produced by the baud generator is obtained from this input
+frequency by dividing it by the clock prescaler, which can be set to any
+value from 1 to 63.875 in increments of 0.125, and then the usual 16-bit
+divisor is used as with the original 8250, to divide the frequency by a
+value from 1 to 65535.  Finally a programmable oversampling rate is used
+that can take any value from 4 to 16 to divide the frequency further and
+determine the actual baud rate used.  Baud rates from 15625000bps down
+to 0.933bps can be obtained this way.
+
+By default the oversampling rate is set to 16 and the clock prescaler is
+set to 33.875, meaning that the frequency to be used as the reference
+for the usual 16-bit divisor is 115313.653, which is close enough to the
+frequency of 115200 used by the original 8250 for the same values to be
+used for the divisor to obtain the requested baud rates by software that
+is unaware of the extra clock controls available.
+
+The oversampling rate is programmed with the TCR register and the clock
+prescaler is programmed with the CPR/CPR2 register pair[1][2][3][4].
+To switch away from the default value of 33.875 for the prescaler the
+the enhanced mode has to be explicitly enabled though, by setting bit 4
+of the EFR.  In that mode setting bit 7 in the MCR enables the prescaler
+or otherwise it is bypassed as if the value of 1 was used.  Additionally
+writing any value to CPR clears CPR2 for compatibility with old software
+written for older conventional PCI Oxford Semiconductor devices that do
+not have the extra prescaler's 9th bit in CPR2, so the CPR/CPR2 register
+pair has to be programmed in the right order.
+
+By using these parameters rates from 15625000bps down to 1bps can be
+obtained, with either exact or highly-accurate actual bit rates for
+standard and many non-standard rates.
+
+Here are the figures for the standard and some non-standard baud rates
+(including those quoted in Oxford Semiconductor documentation), giving
+the requested rate (r), the actual rate yielded (a) and its deviation
+from the requested rate (d), and the values of the oversampling rate
+(tcr), the clock prescaler (cpr) and the divisor (div) produced by the
+new `get_divisor' handler:
+
+r: 15625000, a: 15625000.00, d:  0.0000%, tcr:  4, cpr:  1.000, div:     1
+r: 12500000, a: 12500000.00, d:  0.0000%, tcr:  5, cpr:  1.000, div:     1
+r: 10416666, a: 10416666.67, d:  0.0000%, tcr:  6, cpr:  1.000, div:     1
+r:  8928571, a:  8928571.43, d:  0.0000%, tcr:  7, cpr:  1.000, div:     1
+r:  7812500, a:  7812500.00, d:  0.0000%, tcr:  8, cpr:  1.000, div:     1
+r:  4000000, a:  4000000.00, d:  0.0000%, tcr:  5, cpr:  3.125, div:     1
+r:  3686400, a:  3676470.59, d: -0.2694%, tcr:  8, cpr:  2.125, div:     1
+r:  3500000, a:  3496503.50, d: -0.0999%, tcr: 13, cpr:  1.375, div:     1
+r:  3000000, a:  2976190.48, d: -0.7937%, tcr: 14, cpr:  1.500, div:     1
+r:  2500000, a:  2500000.00, d:  0.0000%, tcr: 10, cpr:  2.500, div:     1
+r:  2000000, a:  2000000.00, d:  0.0000%, tcr: 10, cpr:  3.125, div:     1
+r:  1843200, a:  1838235.29, d: -0.2694%, tcr: 16, cpr:  2.125, div:     1
+r:  1500000, a:  1492537.31, d: -0.4975%, tcr:  5, cpr:  8.375, div:     1
+r:  1152000, a:  1152073.73, d:  0.0064%, tcr: 14, cpr:  3.875, div:     1
+r:   921600, a:   919117.65, d: -0.2694%, tcr: 16, cpr:  2.125, div:     2
+r:   576000, a:   576036.87, d:  0.0064%, tcr: 14, cpr:  3.875, div:     2
+r:   460800, a:   460829.49, d:  0.0064%, tcr:  7, cpr:  3.875, div:     5
+r:   230400, a:   230414.75, d:  0.0064%, tcr: 14, cpr:  3.875, div:     5
+r:   115200, a:   115207.37, d:  0.0064%, tcr: 14, cpr:  1.250, div:    31
+r:    57600, a:    57603.69, d:  0.0064%, tcr:  8, cpr:  3.875, div:    35
+r:    38400, a:    38402.46, d:  0.0064%, tcr: 14, cpr:  3.875, div:    30
+r:    19200, a:    19201.23, d:  0.0064%, tcr:  8, cpr:  3.875, div:   105
+r:     9600, a:     9600.06, d:  0.0006%, tcr:  9, cpr:  1.125, div:   643
+r:     4800, a:     4799.98, d: -0.0004%, tcr:  7, cpr:  2.875, div:   647
+r:     2400, a:     2400.02, d:  0.0008%, tcr:  9, cpr:  2.250, div:  1286
+r:     1200, a:     1200.00, d:  0.0000%, tcr: 14, cpr:  2.875, div:  1294
+r:      300, a:      300.00, d:  0.0000%, tcr: 11, cpr:  2.625, div:  7215
+r:      200, a:      200.00, d:  0.0000%, tcr: 16, cpr:  1.250, div: 15625
+r:      150, a:      150.00, d:  0.0000%, tcr: 13, cpr:  2.250, div: 14245
+r:      134, a:      134.00, d:  0.0000%, tcr: 11, cpr:  2.625, div: 16153
+r:      110, a:      110.00, d:  0.0000%, tcr: 12, cpr:  1.000, div: 47348
+r:       75, a:       75.00, d:  0.0000%, tcr:  4, cpr:  5.875, div: 35461
+r:       50, a:       50.00, d:  0.0000%, tcr: 16, cpr:  1.250, div: 62500
+r:       25, a:       25.00, d:  0.0000%, tcr: 16, cpr:  2.500, div: 62500
+r:        4, a:        4.00, d:  0.0000%, tcr: 16, cpr: 20.000, div: 48828
+r:        2, a:        2.00, d:  0.0000%, tcr: 16, cpr: 40.000, div: 48828
+r:        1, a:        1.00, d:  0.0000%, tcr: 16, cpr: 63.875, div: 61154
+
+With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX
+limitation imposed by `serial8250_get_baud_rate' standard baud rates
+below 300bps become unavailable in the regular way, e.g. the rate of
+200bps requires the baud base to be divided by 78125 and that is beyond
+the unsigned 16-bit range.  The historic spd_cust feature can still be
+used by encoding the values for, the prescaler, the oversampling rate
+and the clock divisor (DLM/DLL) as follows to obtain such rates if so
+required:
+
+ 31 29 28             20 19   16 15                            0
++-----+-----------------+-------+-------------------------------+
+|0 0 0|    CPR2:CPR     |  TCR  |            DLM:DLL            |
++-----+-----------------+-------+-------------------------------+
+
+Use a value such encoded for the `custom_divisor' field along with the
+ASYNC_SPD_CUST flag set in the `flags' field in `struct serial_struct'
+passed with the TIOCSSERIAL ioctl(2), such as with the setserial(8)
+utility and its `divisor' and `spd_cust' parameters, and the select
+the baud rate of 38400bps.  Note that the value of 0 in TCR sets the
+oversampling rate to 16 and prescaler values below 1 in CPR2/CPR are
+clamped by the driver to 1.
+
+For example the value of 0x1f4004e2 will set CPR2/CPR, TCR and DLM/DLL
+respectively to 0x1f4, 0x0 and 0x04e2, choosing the prescaler value,
+the oversampling rate and the clock divisor of 62.500, 16 and 1250
+respectively.  These parameters will set the baud rate for the serial
+port to 62500000 / 62.500 / 1250 / 16 = 50bps.
+
+References:
+
+[1] "OXPCIe200 PCI Express Multi-Port Bridge", Oxford Semiconductor,
+    Inc., DS-0045, 10 Nov 2008, Section "950 Mode", pp. 64-65
+
+[2] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port",
+    Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Section "950 Mode",
+    p. 20
+
+[3] "OXPCIe954 PCI Express Bridge to Quad Serial Port", Oxford
+    Semiconductor, Inc., DS-0047, Feb 08, Section "950 Mode", p. 20
+
+[4] "OXPCIe958 PCI Express Bridge to Octal Serial Port", Oxford
+    Semiconductor, Inc., DS-0048, Feb 08, Section "950 Mode", p. 20
+
+Maciej W. Rozycki  <macro@orcam.me.uk>
diff --git linux-libre-5.15-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-5.15.187-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 6655d929a351..404ecb6d0f87 100644
--- linux-libre-5.15-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-5.15.187-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -304,7 +304,6 @@ Code  Seq#    Include File                                           Comments
 0x89  00-06  arch/x86/include/asm/sockios.h
 0x89  0B-DF  linux/sockios.h
 0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
-0x89  E0-EF  linux/dn.h                                              PROTOPRIVATE range
 0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
 0x8B  all    linux/wireless.h
 0x8C  00-3F                                                          WiNRADiO driver
diff --git linux-libre-5.15-gnu/Documentation/userspace-api/landlock.rst linux-libre-5.15.187-gnu/Documentation/userspace-api/landlock.rst
index f35552ff19ba..b68e7a51009f 100644
--- linux-libre-5.15-gnu/Documentation/userspace-api/landlock.rst
+++ linux-libre-5.15.187-gnu/Documentation/userspace-api/landlock.rst
@@ -267,8 +267,8 @@ restrict such paths with dedicated ruleset flags.
 Ruleset layers
 --------------
 
-There is a limit of 64 layers of stacked rulesets.  This can be an issue for a
-task willing to enforce a new ruleset in complement to its 64 inherited
+There is a limit of 16 layers of stacked rulesets.  This can be an issue for a
+task willing to enforce a new ruleset in complement to its 16 inherited
 rulesets.  Once this limit is reached, sys_landlock_restrict_self() returns
 E2BIG.  It is then strongly suggested to carefully build rulesets once in the
 life of a thread, especially for applications able to launch other applications
diff --git linux-libre-5.15-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst linux-libre-5.15.187-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 976d34445a24..f1421cf1a1b3 100644
--- linux-libre-5.15-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ linux-libre-5.15.187-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -3326,15 +3326,15 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - __u8
       - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference
-        picture set.
+        picture set": provides the index of the short term before references in DPB array.
     * - __u8
       - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference
-        picture set.
+        picture set": provides the index of the short term after references in DPB array.
     * - __u8
       - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocLtCurr as described in section 8.3.2 "Decoding process for reference
-        picture set.
+        picture set": provides the index of the long term references in DPB array.
     * - __u64
       - ``flags``
       - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>`
diff --git linux-libre-5.15-gnu/Documentation/virt/kvm/api.rst linux-libre-5.15.187-gnu/Documentation/virt/kvm/api.rst
index a6729c8cf063..ec38299f9428 100644
--- linux-libre-5.15-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-5.15.187-gnu/Documentation/virt/kvm/api.rst
@@ -4117,6 +4117,18 @@ not holding a previously reported uncorrected error).
 :Parameters: struct kvm_s390_cmma_log (in, out)
 :Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 
@@ -4197,12 +4209,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 ----------------------------
 
@@ -7265,3 +7271,63 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset
 of the result of KVM_CHECK_EXTENSION.  KVM will forward to userspace
 the hypercalls whose corresponding bit is in the argument, and return
 ENOSYS for the others.
+
+9. Known KVM API problems
+=========================
+
+In some cases, KVM's API has some inconsistencies or common pitfalls
+that userspace need to be aware of.  This section details some of
+these issues.
+
+Most of them are architecture specific, so the section is split by
+architecture.
+
+9.1. x86
+--------
+
+``KVM_GET_SUPPORTED_CPUID`` issues
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible
+to take its result and pass it directly to ``KVM_SET_CPUID2``.  This section
+documents some cases in which that requires some care.
+
+Local APIC features
+~~~~~~~~~~~~~~~~~~~
+
+CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``,
+but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or
+``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of
+the local APIC.
+
+The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature.
+
+CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``.
+It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
+has enabled in-kernel emulation of the local APIC.
+
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems.  Different
+versions of KVM return different values for this information and userspace
+should not rely on it.  Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU.  In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
+Obsolete ioctls and capabilities
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually
+available.  Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if
+available.
+
+Ordering of KVM_GET_*/KVM_SET_* ioctls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TBD
diff --git linux-libre-5.15-gnu/Documentation/virt/kvm/devices/vm.rst linux-libre-5.15.187-gnu/Documentation/virt/kvm/devices/vm.rst
index 0aa5b1cfd700..147efec626e5 100644
--- linux-libre-5.15-gnu/Documentation/virt/kvm/devices/vm.rst
+++ linux-libre-5.15.187-gnu/Documentation/virt/kvm/devices/vm.rst
@@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT).
 :Parameters: address of a buffer in user space to store the data (u8) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
 -----------------------------------
@@ -224,6 +225,7 @@ the POP (u64).
 
 :Parameters: address of a buffer in user space to store the data (u64) to
 :Returns:    -EFAULT if the given address is not accessible from kernel space
+	     -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT
 -----------------------------------
@@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0.
 	     (kvm_s390_vm_tod_clock) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 4. GROUP: KVM_S390_VM_CRYPTO
 ============================
@@ -299,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 :Parameters: none
 :Returns:   -ENOMEM if there is not enough free memory to start migration mode;
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined);
diff --git linux-libre-5.15-gnu/Documentation/x86/mds.rst linux-libre-5.15.187-gnu/Documentation/x86/mds.rst
index 5d4330be200f..e801df0bb3a8 100644
--- linux-libre-5.15-gnu/Documentation/x86/mds.rst
+++ linux-libre-5.15.187-gnu/Documentation/x86/mds.rst
@@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing:
 
     mds_clear_cpu_buffers()
 
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
+
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
 
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
diff --git linux-libre-5.15-gnu/MAINTAINERS linux-libre-5.15.187-gnu/MAINTAINERS
index 3b79fd441dde..6bfc75861c8c 100644
--- linux-libre-5.15-gnu/MAINTAINERS
+++ linux-libre-5.15.187-gnu/MAINTAINERS
@@ -434,6 +434,7 @@ ACPI VIOT DRIVER
 M:	Jean-Philippe Brucker <jean-philippe@linaro.org>
 L:	linux-acpi@vger.kernel.org
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 F:	drivers/acpi/viot.c
 F:	include/linux/acpi_viot.h
@@ -941,6 +942,7 @@ AMD IOMMU (AMD-VI)
 M:	Joerg Roedel <joro@8bytes.org>
 R:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	drivers/iommu/amd/
@@ -1248,7 +1250,7 @@ APEX EMBEDDED SYSTEMS STX104 IIO DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/adc/stx104.c
+F:	drivers/iio/addac/stx104.c
 
 APM DRIVER
 M:	Jiri Kosina <jikos@kernel.org>
@@ -3112,7 +3114,7 @@ F:	drivers/net/ieee802154/atusb.h
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
-L:	linux-audit@redhat.com (moderated for non-subscribers)
+L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
@@ -3405,6 +3407,7 @@ F:	net/sched/act_bpf.c
 F:	net/sched/cls_bpf.c
 F:	samples/bpf/
 F:	scripts/bpf_doc.py
+F:	scripts/pahole-version.sh
 F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/
@@ -4663,6 +4666,7 @@ T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
 F:	fs/cifs/
 F:	fs/smbfs_common/
+F:	include/uapi/linux/cifs
 
 COMPACTPCI HOTPLUG CORE
 M:	Scott Murray <scott@spiteful.org>
@@ -4810,7 +4814,6 @@ F:	Documentation/ABI/testing/sysfs-bus-counter
 F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
-F:	include/linux/counter_enum.h
 
 CP2615 I2C DRIVER
 M:	Bence Csókás <bence98@sch.bme.hu>
@@ -5203,13 +5206,6 @@ F:	include/linux/tfrc.h
 F:	include/uapi/linux/dccp.h
 F:	net/dccp/
 
-DECnet NETWORK LAYER
-L:	linux-decnet-user@lists.sourceforge.net
-S:	Orphan
-W:	http://linux-decnet.sourceforge.net
-F:	Documentation/networking/decnet.rst
-F:	net/decnet/
-
 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@orcam.me.uk>
 L:	linux-mips@vger.kernel.org
@@ -5602,6 +5598,7 @@ M:	Christoph Hellwig <hch@lst.de>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
 R:	Robin Murphy <robin.murphy@arm.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 W:	http://git.infradead.org/users/hch/dma-mapping.git
 T:	git git://git.infradead.org/users/hch/dma-mapping.git
@@ -5614,6 +5611,7 @@ F:	kernel/dma/
 DMA MAPPING BENCHMARK
 M:	Barry Song <song.bao.hua@hisilicon.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 F:	kernel/dma/map_benchmark.c
 F:	tools/testing/selftests/dma/
 
@@ -7024,7 +7022,6 @@ F:	drivers/net/mdio/fwnode_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
 F:	drivers/net/phy/
-F:	drivers/of/of_net.c
 F:	include/dt-bindings/net/qca-ar803x.h
 F:	include/linux/*mdio*.h
 F:	include/linux/mdio/*.h
@@ -7036,6 +7033,7 @@ F:	include/linux/platform_data/mdio-gpio.h
 F:	include/trace/events/mdio.h
 F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
+F:	net/core/of_net.c
 
 EXFAT FILE SYSTEM
 M:	Namjae Jeon <linkinjeon@kernel.org>
@@ -7115,6 +7113,7 @@ F:	drivers/gpu/drm/exynos/exynos_dp*
 EXYNOS SYSMMU (IOMMU) driver
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 F:	drivers/iommu/exynos-iommu.c
 
@@ -7239,9 +7238,6 @@ F:	include/linux/fs.h
 F:	include/linux/fs_types.h
 F:	include/uapi/linux/fs.h
 F:	include/uapi/linux/openat2.h
-X:	fs/io-wq.c
-X:	fs/io-wq.h
-X:	fs/io_uring.c
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
@@ -7744,7 +7740,7 @@ F:	Documentation/locking/*futex*
 F:	include/asm-generic/futex.h
 F:	include/linux/futex.h
 F:	include/uapi/linux/futex.h
-F:	kernel/futex.c
+F:	kernel/futex/*
 F:	tools/perf/bench/futex*
 F:	tools/testing/selftests/futex/
 
@@ -7947,9 +7943,10 @@ F:	drivers/media/usb/go7007/
 
 GOODIX TOUCHSCREEN
 M:	Bastien Nocera <hadess@hadess.net>
+M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
-F:	drivers/input/touchscreen/goodix.c
+F:	drivers/input/touchscreen/goodix*
 
 GOOGLE ETHERNET DRIVERS
 M:	Jeroen de Borst <jeroendb@google.com>
@@ -8565,7 +8562,7 @@ F:	drivers/net/wireless/intersil/hostap/
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
 L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
-F:	drivers/platform/x86/tc1100-wmi.c
+F:	drivers/platform/x86/hp/tc1100-wmi.c
 
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -9203,6 +9200,7 @@ F:	drivers/infiniband/
 F:	include/rdma/
 F:	include/trace/events/ib_mad.h
 F:	include/trace/events/ib_umad.h
+F:	include/trace/misc/rdma.h
 F:	include/uapi/linux/if_infiniband.h
 F:	include/uapi/rdma/
 F:	samples/bpf/ibumad_kern.c
@@ -9457,6 +9455,7 @@ INTEL IOMMU (VT-d)
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Lu Baolu <baolu.lu@linux.intel.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	drivers/iommu/intel/
@@ -9793,6 +9792,7 @@ IOMMU DRIVERS
 M:	Joerg Roedel <joro@8bytes.org>
 M:	Will Deacon <will@kernel.org>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 F:	Documentation/devicetree/bindings/iommu/
@@ -9810,9 +9810,7 @@ L:	io-uring@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.dk/linux-block
 T:	git git://git.kernel.dk/liburing
-F:	fs/io-wq.c
-F:	fs/io-wq.h
-F:	fs/io_uring.c
+F:	io_uring/
 F:	include/linux/io_uring.h
 F:	include/uapi/linux/io_uring.h
 F:	tools/io_uring/
@@ -10184,6 +10182,12 @@ F:	fs/nfs_common/
 F:	fs/nfsd/
 F:	include/linux/lockd/
 F:	include/linux/sunrpc/
+F:	include/trace/events/rpcgss.h
+F:	include/trace/events/rpcrdma.h
+F:	include/trace/events/sunrpc.h
+F:	include/trace/misc/fs.h
+F:	include/trace/misc/nfs.h
+F:	include/trace/misc/sunrpc.h
 F:	include/uapi/linux/nfsd/
 F:	include/uapi/linux/sunrpc/
 F:	net/sunrpc/
@@ -10835,7 +10839,7 @@ M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/misc-devices/lis3lv02d.rst
 F:	drivers/misc/lis3lv02d/
-F:	drivers/platform/x86/hp_accel.c
+F:	drivers/platform/x86/hp/hp_accel.c
 
 LIST KUNIT TEST
 M:	David Gow <davidgow@google.com>
@@ -11795,6 +11799,7 @@ F:	drivers/i2c/busses/i2c-mt65xx.c
 MEDIATEK IOMMU DRIVER
 M:	Yong Wu <yong.wu@mediatek.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/iommu/mediatek*
@@ -15554,6 +15559,7 @@ F:	drivers/i2c/busses/i2c-qcom-cci.c
 QUALCOMM IOMMU
 M:	Rob Clark <robdclark@gmail.com>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -15720,6 +15726,8 @@ F:	arch/mips/generic/board-ranchu.c
 
 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/crng/random.git
 S:	Maintained
 F:	drivers/char/random.c
 
@@ -17980,6 +17988,7 @@ F:	arch/x86/boot/video*
 SWIOTLB SUBSYSTEM
 M:	Christoph Hellwig <hch@infradead.org>
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 W:	http://git.infradead.org/users/hch/dma-mapping.git
 T:	git git://git.infradead.org/users/hch/dma-mapping.git
@@ -20560,12 +20569,14 @@ M:	Juergen Gross <jgross@suse.com>
 M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	iommu@lists.linux-foundation.org
+L:	iommu@lists.linux.dev
 S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 C:	irc://irc.oftc.net/xfs
+M:	Leah Rumancik <leah.rumancik@gmail.com>
 M:	Darrick J. Wong <djwong@kernel.org>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
diff --git linux-libre-5.15-gnu/Makefile linux-libre-5.15.187-gnu/Makefile
index c0031dc001a7..df5ba6761d47 100644
--- linux-libre-5.15-gnu/Makefile
+++ linux-libre-5.15.187-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 0
+SUBLEVEL = 187
 EXTRAVERSION = -gnu
 NAME = Trick or Treat
 
@@ -93,10 +93,17 @@ endif
 
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
 
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
-  quiet=silent_
-  KBUILD_VERBOSE = 0
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
+else
+silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
+endif
+
+ifeq ($(silence),s)
+quiet=silent_
+KBUILD_VERBOSE = 0
 endif
 
 export quiet Q KBUILD_VERBOSE
@@ -430,6 +437,7 @@ else
 HOSTCC	= gcc
 HOSTCXX	= g++
 endif
+HOSTPKG_CONFIG	= pkg-config
 
 export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
 			      -O2 -fomit-frame-pointer -std=gnu89
@@ -480,6 +488,8 @@ LZ4		= lz4c
 XZ		= xz
 ZSTD		= zstd
 
+PAHOLE_FLAGS	= $(shell PAHOLE=$(PAHOLE) $(srctree)/scripts/pahole-flags.sh)
+
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 NOSTDINC_FLAGS :=
@@ -523,7 +533,7 @@ KBUILD_LDFLAGS_MODULE :=
 KBUILD_LDFLAGS :=
 CLANG_FLAGS :=
 
-export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
+export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
@@ -534,6 +544,7 @@ export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export PAHOLE_FLAGS
 
 # Files to ignore in find ... statements
 
@@ -687,12 +698,19 @@ endif
 
 ifdef CONFIG_CC_IS_GCC
 RETPOLINE_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
+RETPOLINE_CFLAGS	+= $(call cc-option,-mindirect-branch-cs-prefix)
 RETPOLINE_VDSO_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-inline -mindirect-branch-register)
 endif
 ifdef CONFIG_CC_IS_CLANG
 RETPOLINE_CFLAGS	:= -mretpoline-external-thunk
 RETPOLINE_VDSO_CFLAGS	:= -mretpoline
 endif
+
+ifdef CONFIG_RETHUNK
+RETHUNK_CFLAGS         := -mfunction-return=thunk-extern
+RETPOLINE_CFLAGS       += $(RETHUNK_CFLAGS)
+endif
+
 export RETPOLINE_CFLAGS
 export RETPOLINE_VDSO_CFLAGS
 
@@ -796,6 +814,18 @@ KBUILD_CFLAGS += -Wno-gnu
 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
 # See modpost pattern 2
 KBUILD_CFLAGS += -mno-global-merge
+
+# Clang may emit a warning when a const variable, such as the dummy variables
+# in typecheck(), or const member of an aggregate type are not initialized,
+# which can result in unexpected behavior. However, in many audited cases of
+# the "field" variant of the warning, this is intentional because the field is
+# never used within a particular call path, the field is within a union with
+# other non-const members, or the containing object is not const so the field
+# can be modified via memcpy() / memset(). While the variable warning also gets
+# disabled with this same switch, there should not be too much coverage lost
+# because -Wuninitialized will still flag when an uninitialized const variable
+# is used.
+KBUILD_CFLAGS += $(call cc-disable-warning, default-const-init-unsafe)
 else
 
 # Warn about unmarked fall-throughs in switch statement.
@@ -811,6 +841,9 @@ endif
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 
+# These result in bogus false positives
+KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer)
+
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
@@ -831,12 +864,12 @@ endif
 
 # Initialize all stack variables with a zero value.
 ifdef CONFIG_INIT_STACK_ALL_ZERO
-# Future support for zero initialization is still being debated, see
-# https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being
-# renamed or dropped.
 KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
+ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
+# https://github.com/llvm/llvm-project/issues/44842
 KBUILD_CFLAGS	+= -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 endif
+endif
 
 # While VLAs have been removed, GCC produces unreachable stack probes
 # for the randomize_kstack_offset feature. Disable it for all compilers.
@@ -857,7 +890,9 @@ else
 DEBUG_CFLAGS	+= -g
 endif
 
-ifndef CONFIG_AS_IS_LLVM
+ifdef CONFIG_AS_IS_LLVM
+KBUILD_AFLAGS	+= -g
+else
 KBUILD_AFLAGS	+= -Wa,-gdwarf-2
 endif
 
@@ -865,6 +900,7 @@ ifndef CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
 dwarf-version-$(CONFIG_DEBUG_INFO_DWARF4) := 4
 dwarf-version-$(CONFIG_DEBUG_INFO_DWARF5) := 5
 DEBUG_CFLAGS	+= -gdwarf-$(dwarf-version-y)
+KBUILD_AFLAGS	+= -gdwarf-$(dwarf-version-y)
 endif
 
 ifdef CONFIG_DEBUG_INFO_REDUCED
@@ -935,7 +971,6 @@ endif
 ifdef CONFIG_LTO_CLANG
 ifdef CONFIG_LTO_CLANG_THIN
 CC_FLAGS_LTO	:= -flto=thin -fsplit-lto-unit
-KBUILD_LDFLAGS	+= --thinlto-cache-dir=$(extmod_prefix).thinlto-cache
 else
 CC_FLAGS_LTO	:= -flto
 endif
@@ -976,8 +1011,8 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_CFI)
 export CC_FLAGS_CFI
 endif
 
-ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B
-KBUILD_CFLAGS += -falign-functions=64
+ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0)
+KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT)
 endif
 
 # arch Makefile may override CC so keep this after arch Makefile is included
@@ -1008,6 +1043,21 @@ ifdef CONFIG_CC_IS_GCC
 KBUILD_CFLAGS += -Wno-maybe-uninitialized
 endif
 
+ifdef CONFIG_CC_IS_GCC
+# The allocators already balk at large sizes, so silence the compiler
+# warnings for bounds checks involving those possible values. While
+# -Wno-alloc-size-larger-than would normally be used here, earlier versions
+# of gcc (<9.1) weirdly don't handle the option correctly when _other_
+# warnings are produced (?!). Using -Walloc-size-larger-than=SIZE_MAX
+# doesn't work (as it is documented to), silently resolving to "0" prior to
+# version 9.1 (and producing an error more recently). Numeric values larger
+# than PTRDIFF_MAX also don't work prior to version 9.1, which are silently
+# ignored, continuing to default to PTRDIFF_MAX. So, left with no other
+# choice, we must perform a versioned check to disable this warning.
+# https://lore.kernel.org/lkml/20210824115859.187f272f@canb.auug.org.au
+KBUILD_CFLAGS += $(call cc-ifversion, -ge, 0901, -Wno-alloc-size-larger-than)
+endif
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow
 
@@ -1028,6 +1078,9 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 # Require designated initializers for all marked structures
 KBUILD_CFLAGS   += $(call cc-option,-Werror=designated-init)
 
+# Ensure compilers do not transform certain loops into calls to wcslen()
+KBUILD_CFLAGS += -fno-builtin-wcslen
+
 # change __FILE__ to the relative path from the srctree
 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
@@ -1053,6 +1106,11 @@ KBUILD_CFLAGS   += $(KCFLAGS)
 KBUILD_LDFLAGS_MODULE += --build-id=sha1
 LDFLAGS_vmlinux += --build-id=sha1
 
+KBUILD_LDFLAGS	+= -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+KBUILD_LDFLAGS	+= $(call ld-option,--no-warn-rwx-segments)
+endif
+
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
@@ -1068,8 +1126,13 @@ LDFLAGS_vmlinux += --orphan-handling=warn
 endif
 
 # Align the bit size of userspace programs with the kernel
-KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
-KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
+KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+
+# userspace programs are linked via the compiler, use the correct linker
+ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy)
+KBUILD_USERLDFLAGS += $(call cc-option, --ld-path=$(LD))
+endif
 
 # make the checker run with the right architecture
 CHECKFLAGS += --arch=$(ARCH)
@@ -1115,7 +1178,9 @@ export MODORDER := $(extmod_prefix)modules.order
 export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps
 
 ifeq ($(KBUILD_EXTMOD),)
-core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
+core-y			+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/
+core-$(CONFIG_BLOCK)	+= block/
+core-$(CONFIG_IO_URING)	+= io_uring/
 
 vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, \
 		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
@@ -1125,13 +1190,11 @@ vmlinux-alldirs	:= $(sort $(vmlinux-dirs) Documentation \
 		     $(patsubst %/,%,$(filter %/, $(core-) \
 			$(drivers-) $(libs-))))
 
-subdir-modorder := $(addsuffix modules.order,$(filter %/, \
-			$(core-y) $(core-m) $(libs-y) $(libs-m) \
-			$(drivers-y) $(drivers-m)))
-
 build-dirs	:= $(vmlinux-dirs)
 clean-dirs	:= $(vmlinux-alldirs)
 
+subdir-modorder := $(addsuffix /modules.order, $(build-dirs))
+
 # Externally visible symbols (used by link-vmlinux.sh)
 KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y))
 KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y)))
@@ -1160,7 +1223,7 @@ KBUILD_MODULES := 1
 
 autoksyms_recursive: descend modules.order
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) -f $(srctree)/Makefile vmlinux"
+	  "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
 endif
 
 autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
@@ -1301,8 +1364,7 @@ hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
 
 PHONY += headers
 headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
-	$(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
-	  $(error Headers not exportable for the $(SRCARCH) architecture))
+	$(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML))
 	$(Q)$(MAKE) $(hdr-inst)=include/uapi
 	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
 
@@ -1517,7 +1579,7 @@ endif # CONFIG_MODULES
 # Directories & files removed with 'make clean'
 CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
-	       compile_commands.json .thinlto-cache
+	       compile_commands.json
 
 # Directories & files removed with 'make mrproper'
 MRPROPER_FILES += include/config include/generated          \
@@ -1745,7 +1807,7 @@ PHONY += compile_commands.json
 
 clean-dirs := $(KBUILD_EXTMOD)
 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \
-	$(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache
+	$(KBUILD_EXTMOD)/compile_commands.json
 
 PHONY += prepare
 # now expand this into a simple variable to reduce the cost of shell evaluations
@@ -1792,7 +1854,9 @@ quiet_cmd_depmod = DEPMOD  $(MODLIB)
 
 modules_install:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+ifndef modules_sign_only
 	$(call cmd,depmod)
+endif
 
 else # CONFIG_MODULES
 
@@ -1807,6 +1871,8 @@ modules modules_install:
 	@echo >&2 '***'
 	@exit 1
 
+KBUILD_MODULES :=
+
 endif # CONFIG_MODULES
 
 # Single targets
@@ -1832,18 +1898,12 @@ $(single-ko): single_modpost
 $(single-no-ko): descend
 	@:
 
-ifeq ($(KBUILD_EXTMOD),)
-# For the single build of in-tree modules, use a temporary file to avoid
-# the situation of modules_install installing an invalid modules.order.
-MODORDER := .modules.tmp
-endif
-
+# Remove MODORDER when done because it is not the real one.
 PHONY += single_modpost
 single_modpost: $(single-no-ko) modules_prepare
 	$(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$m;) } > $(MODORDER)
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
-KBUILD_MODULES := 1
+	$(Q)rm -f $(MODORDER)
 
 export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod_prefix), $(single-no-ko))
 
@@ -1851,10 +1911,8 @@ export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod_prefix), $(single-no-ko))
 build-dirs := $(foreach d, $(build-dirs), \
 			$(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
 
-endif
+KBUILD_MODULES := 1
 
-ifndef CONFIG_MODULES
-KBUILD_MODULES :=
 endif
 
 # Handle descending into subdirectories listed in $(build-dirs)
diff --git linux-libre-5.15-gnu/arch/Kconfig linux-libre-5.15.187-gnu/arch/Kconfig
index 8df1c7102643..69e374320633 100644
--- linux-libre-5.15-gnu/arch/Kconfig
+++ linux-libre-5.15.187-gnu/arch/Kconfig
@@ -9,6 +9,14 @@
 #
 source "arch/$(SRCARCH)/Kconfig"
 
+config ARCH_CONFIGURES_CPU_MITIGATIONS
+	bool
+
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
+
 menu "General architecture-dependent options"
 
 config CRASH_CORE
@@ -200,6 +208,9 @@ config HAVE_NMI
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -261,6 +272,9 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
+
 # Select if arch init_task must go in the __init_task_data section
 config ARCH_TASK_STRUCT_ON_STACK
 	bool
@@ -599,6 +613,7 @@ config SHADOW_CALL_STACK
 	bool "Clang Shadow Call Stack"
 	depends on CC_IS_CLANG && ARCH_SUPPORTS_SHADOW_CALL_STACK
 	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
 	  This option enables Clang's Shadow Call Stack, which uses a
 	  shadow stack to protect function return addresses from being
@@ -1141,6 +1156,7 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 config RANDOMIZE_KSTACK_OFFSET_DEFAULT
 	bool "Randomize kernel stack offset on syscall entry"
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
@@ -1234,6 +1250,9 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
        bool
        help
@@ -1292,4 +1311,28 @@ source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
 
+config FUNCTION_ALIGNMENT_4B
+	bool
+
+config FUNCTION_ALIGNMENT_8B
+	bool
+
+config FUNCTION_ALIGNMENT_16B
+	bool
+
+config FUNCTION_ALIGNMENT_32B
+	bool
+
+config FUNCTION_ALIGNMENT_64B
+	bool
+
+config FUNCTION_ALIGNMENT
+	int
+	default 64 if FUNCTION_ALIGNMENT_64B
+	default 32 if FUNCTION_ALIGNMENT_32B
+	default 16 if FUNCTION_ALIGNMENT_16B
+	default 8 if FUNCTION_ALIGNMENT_8B
+	default 4 if FUNCTION_ALIGNMENT_4B
+	default 0
+
 endmenu
diff --git linux-libre-5.15-gnu/arch/alpha/boot/tools/objstrip.c linux-libre-5.15.187-gnu/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- linux-libre-5.15-gnu/arch/alpha/boot/tools/objstrip.c
+++ linux-libre-5.15.187-gnu/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/bugs.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- linux-libre-5.15-gnu/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/elf.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/elf.h
index 8049997fa372..2039a8c8d547 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/elf.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -145,10 +145,6 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/page.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/page.h
index 18f48a6f2ff6..8f3f5eecba28 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/page.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/asm/page.h
@@ -18,7 +18,7 @@ extern void clear_page(void *page);
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 
 #define alloc_zeroed_user_highpage_movable(vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, vma, vmaddr)
+	alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, vma, vaddr)
 #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE_MOVABLE
 
 extern void copy_page(void * _to, void * _from);
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/pgtable.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/pgtable.h
index 02f0429f1068..8e3cf3c9f913 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/pgtable.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/asm/pgtable.h
@@ -340,7 +340,7 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/processor.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/processor.h
index 6100431da07a..d27db62c3247 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/processor.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/asm/processor.h
@@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 typedef struct {
 	unsigned long seg;
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/thread_info.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/thread_info.h
index 2592356e3215..0ce1eee0924b 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/thread_info.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/asm/thread_info.h
@@ -77,7 +77,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/timex.h linux-libre-5.15.187-gnu/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/timex.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git linux-libre-5.15-gnu/arch/alpha/include/uapi/asm/ptrace.h linux-libre-5.15.187-gnu/arch/alpha/include/uapi/asm/ptrace.h
index c29194181025..22170f7b8be8 100644
--- linux-libre-5.15-gnu/arch/alpha/include/uapi/asm/ptrace.h
+++ linux-libre-5.15.187-gnu/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/asm-offsets.c linux-libre-5.15.187-gnu/arch/alpha/kernel/asm-offsets.c
index 2e125e5c1508..05d9296af5ea 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/asm-offsets.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/asm-offsets.c
@@ -32,7 +32,9 @@ void foo(void)
         DEFINE(CRED_EGID, offsetof(struct cred, egid));
         BLANK();
 
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
 	DEFINE(PT_PTRACED, PT_PTRACED);
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/entry.S linux-libre-5.15.187-gnu/arch/alpha/kernel/entry.S
index e227f3a29a43..ba99cc9d27c7 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	320
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -199,8 +195,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -215,7 +211,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -228,7 +224,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -236,7 +232,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -383,8 +379,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -400,7 +396,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -410,7 +406,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -418,7 +414,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
@@ -469,8 +465,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/irq.c linux-libre-5.15.187-gnu/arch/alpha/kernel/irq.c
index f6d2946edbd2..15f2effd6baf 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/irq.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/irq.c
@@ -60,7 +60,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+	irq_data_update_affinity(data, cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/module.c linux-libre-5.15.187-gnu/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/module.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/osf_sys.c linux-libre-5.15.187-gnu/arch/alpha/kernel/osf_sys.c
index 8bbeebb73cf0..2dfb69a2ae43 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/osf_sys.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/osf_sys.c
@@ -1212,8 +1212,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
@@ -1235,13 +1234,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
 		       unsigned long flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/rtc.c linux-libre-5.15.187-gnu/arch/alpha/kernel/rtc.c
index ce3077946e1d..fb3025396ac9 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/rtc.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/rtc.c
@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/setup.c linux-libre-5.15.187-gnu/arch/alpha/kernel/setup.c
index b4fbbba30aa2..8c4c14a171e2 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/setup.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/setup.c
@@ -385,8 +385,7 @@ setup_memory(void *kernel_end)
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/srmcons.c linux-libre-5.15.187-gnu/arch/alpha/kernel/srmcons.c
index 90635ef5dafa..6dc952b0df4a 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/srmcons.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/srmcons.c
@@ -59,7 +59,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/traps.c linux-libre-5.15.187-gnu/arch/alpha/kernel/traps.c
index e805106409f7..a78e93256ecb 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-5.15.187-gnu/arch/alpha/kernel/traps.c
@@ -192,7 +192,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 #ifndef CONFIG_MATHEMU
@@ -235,7 +235,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -368,20 +382,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
@@ -577,7 +577,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 
 got_exception:
 	/* Ok, we caught the exception, but we don't want it.  Is there
@@ -632,7 +632,7 @@ got_exception:
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 /*
@@ -709,7 +709,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
diff --git linux-libre-5.15-gnu/arch/alpha/mm/fault.c linux-libre-5.15.187-gnu/arch/alpha/mm/fault.c
index eee5102c3d88..56ea2856e488 100644
--- linux-libre-5.15-gnu/arch/alpha/mm/fault.c
+++ linux-libre-5.15.187-gnu/arch/alpha/mm/fault.c
@@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
@@ -204,7 +204,7 @@ retry:
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
diff --git linux-libre-5.15-gnu/arch/arc/Makefile linux-libre-5.15.187-gnu/arch/arc/Makefile
index 8782a03f24a8..60b7a7723b1e 100644
--- linux-libre-5.15-gnu/arch/arc/Makefile
+++ linux-libre-5.15.187-gnu/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
diff --git linux-libre-5.15-gnu/arch/arc/boot/dts/hsdk.dts linux-libre-5.15.187-gnu/arch/arc/boot/dts/hsdk.dts
index dcaa44e408ac..27f4194b376b 100644
--- linux-libre-5.15-gnu/arch/arc/boot/dts/hsdk.dts
+++ linux-libre-5.15.187-gnu/arch/arc/boot/dts/hsdk.dts
@@ -205,7 +205,6 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/atomic-llsc.h linux-libre-5.15.187-gnu/arch/arc/include/asm/atomic-llsc.h
index 088d348781c1..0b7c902c72ba 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/atomic-llsc.h
+++ linux-libre-5.15.187-gnu/arch/arc/include/asm/atomic-llsc.h
@@ -18,7 +18,7 @@ static inline void arch_atomic_##op(int i, atomic_t *v)			\
 	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
 	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
@@ -34,7 +34,7 @@ static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 	: [val]	"=&r"	(val)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -56,7 +56,7 @@ static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/atomic64-arcv2.h linux-libre-5.15.187-gnu/arch/arc/include/asm/atomic64-arcv2.h
index c5a8010fdc97..9089f34baac3 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/atomic64-arcv2.h
+++ linux-libre-5.15.187-gnu/arch/arc/include/asm/atomic64-arcv2.h
@@ -60,7 +60,7 @@ static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
 	"	bnz     1b		\n"				\
 	: "=&r"(val)							\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
@@ -77,7 +77,7 @@ static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: [val] "=&r"(val)						\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -99,7 +99,7 @@ static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: "=&r"(orig), "=&r"(val)					\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/io.h linux-libre-5.15.187-gnu/arch/arc/include/asm/io.h
index 8f777d6441a5..80347382a380 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/io.h
+++ linux-libre-5.15.187-gnu/arch/arc/include/asm/io.h
@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 /*
  * io{read,write}{16,32}be() macros
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/linkage.h linux-libre-5.15.187-gnu/arch/arc/include/asm/linkage.h
index c9434ff3aa4c..8a3fb71e9cfa 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/linkage.h
+++ linux-libre-5.15.187-gnu/arch/arc/include/asm/linkage.h
@@ -8,6 +8,10 @@
 
 #include <asm/dwarf.h>
 
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
 #ifdef __ASSEMBLY__
 
 .macro ST2 e, o, off
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
diff --git linux-libre-5.15-gnu/arch/arc/include/asm/pgtable-levels.h linux-libre-5.15.187-gnu/arch/arc/include/asm/pgtable-levels.h
index 8084ef2f6491..4e7a19cb8e52 100644
--- linux-libre-5.15-gnu/arch/arc/include/asm/pgtable-levels.h
+++ linux-libre-5.15.187-gnu/arch/arc/include/asm/pgtable-levels.h
@@ -163,7 +163,7 @@
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
 /*
  * 4th level paging: pte
diff --git linux-libre-5.15-gnu/arch/arc/kernel/entry.S linux-libre-5.15.187-gnu/arch/arc/kernel/entry.S
index dd77a0c8f740..66ba549b520f 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/entry.S
+++ linux-libre-5.15.187-gnu/arch/arc/kernel/entry.S
@@ -196,6 +196,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
diff --git linux-libre-5.15-gnu/arch/arc/kernel/process.c linux-libre-5.15.187-gnu/arch/arc/kernel/process.c
index 3793876f42d9..5f7f5aab361f 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/process.c
+++ linux-libre-5.15.187-gnu/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
@@ -294,7 +294,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	eflags = x->e_flags;
 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
-		force_sigsegv(SIGSEGV);
+		force_fatal_sig(SIGSEGV);
 		return 0;
 	}
 
diff --git linux-libre-5.15-gnu/arch/arc/kernel/signal.c linux-libre-5.15.187-gnu/arch/arc/kernel/signal.c
index cb2f88502baf..25c16eb1d90b 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/signal.c
+++ linux-libre-5.15.187-gnu/arch/arc/kernel/signal.c
@@ -61,7 +61,7 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -74,12 +74,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
 #else
 	v2abi.r58 = v2abi.r59 = 0;
 #endif
-	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
 #endif
 	return err;
 }
 
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
diff --git linux-libre-5.15-gnu/arch/arc/mm/init.c linux-libre-5.15.187-gnu/arch/arc/mm/init.c
index 699ecf119641..110eb69e9bee 100644
--- linux-libre-5.15-gnu/arch/arc/mm/init.c
+++ linux-libre-5.15.187-gnu/arch/arc/mm/init.c
@@ -59,13 +59,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 		low_mem_sz = size;
 		in_use = 1;
-		memblock_add_node(base, size, 0);
+		memblock_add_node(base, size, 0, MEMBLOCK_NONE);
 	} else {
 #ifdef CONFIG_HIGHMEM
 		high_mem_start = base;
 		high_mem_sz = size;
 		in_use = 1;
-		memblock_add_node(base, size, 1);
+		memblock_add_node(base, size, 1, MEMBLOCK_NONE);
 		memblock_reserve(base, size);
 #endif
 	}
diff --git linux-libre-5.15-gnu/arch/arc/mm/ioremap.c linux-libre-5.15.187-gnu/arch/arc/mm/ioremap.c
index 0ee75aca6e10..712c2311daef 100644
--- linux-libre-5.15-gnu/arch/arc/mm/ioremap.c
+++ linux-libre-5.15.187-gnu/arch/arc/mm/ioremap.c
@@ -94,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
diff --git linux-libre-5.15-gnu/arch/arm/Kconfig linux-libre-5.15.187-gnu/arch/arm/Kconfig
index dcf2df6da98f..f2fbb170d813 100644
--- linux-libre-5.15-gnu/arch/arm/Kconfig
+++ linux-libre-5.15.187-gnu/arch/arm/Kconfig
@@ -4,6 +4,7 @@ config ARM
 	default y
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
@@ -1455,6 +1456,7 @@ config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1740,7 +1742,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
diff --git linux-libre-5.15-gnu/arch/arm/Kconfig.debug linux-libre-5.15.187-gnu/arch/arm/Kconfig.debug
index 98436702e0c7..644875d73ba1 100644
--- linux-libre-5.15-gnu/arch/arm/Kconfig.debug
+++ linux-libre-5.15.187-gnu/arch/arm/Kconfig.debug
@@ -410,12 +410,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git linux-libre-5.15-gnu/arch/arm/Makefile linux-libre-5.15.187-gnu/arch/arm/Makefile
index 847c31e7c368..fa45837b8065 100644
--- linux-libre-5.15-gnu/arch/arm/Makefile
+++ linux-libre-5.15.187-gnu/arch/arm/Makefile
@@ -60,15 +60,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -90,11 +90,11 @@ tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/efi-header.S linux-libre-5.15.187-gnu/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..230030c13085 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-5.15.187-gnu/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/head.S linux-libre-5.15.187-gnu/arch/arm/boot/compressed/head.S
index b1cb1972361b..bf79f2f78d23 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/head.S
+++ linux-libre-5.15.187-gnu/arch/arm/boot/compressed/head.S
@@ -203,7 +203,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/vmlinux.lds.S linux-libre-5.15.187-gnu/arch/arm/boot/compressed/vmlinux.lds.S
index 1bcb68ac4b01..3fcb3e62dc56 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/vmlinux.lds.S
+++ linux-libre-5.15.187-gnu/arch/arm/boot/compressed/vmlinux.lds.S
@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/Makefile linux-libre-5.15.187-gnu/arch/arm/boot/dts/Makefile
index 7e0934180724..7a72fc636a7a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/Makefile
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/Makefile
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
@@ -779,6 +780,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am335x-bone-common.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am335x-bone-common.dtsi
index 0ccdc7cd463b..c455c91fe3b3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -145,6 +145,8 @@
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			/* Added to support GPIO controlled PHY reset */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7)
 		>;
 	};
 
@@ -153,6 +155,8 @@
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* Added to support GPIO controlled PHY reset */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
@@ -377,6 +381,10 @@
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
+		/* Support GPIO reset on revision C3 boards */
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <300>;
+		reset-deassert-us = <50000>;
 	};
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 124026fa0d09..f207499461b3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -12,22 +12,20 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am33xx-l4.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
index 356446131e63..7e376dfcc859 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1500,8 +1500,7 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am33xx.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am33xx.dtsi
index f6ec85d58dd1..7daf6ae2cd9a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am33xx.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am33xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM33XX SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -352,6 +349,7 @@
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
 			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-evm.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..c8b80f156ec9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-evm.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am3517-evm.dts
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-som.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-som.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am3517.dtsi
index de33c4f89f33..cb316135bc7c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am3517.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for am3517 SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap3.dtsi"
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am4372.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am4372.dtsi
index 61a1d88f9df6..8613355bbd5e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am4372.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am4372.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM4372 SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am5748.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/am5748.dtsi
index c260aa1a85bd..a1f029e9d1f3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am5748.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am5748.dtsi
@@ -25,6 +25,10 @@
 	status = "disabled";
 };
 
+&usb4_tm {
+	status = "disabled";
+};
+
 &atl_tm {
 	status = "disabled";
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2e94f32d9dfc..5de82729eb7e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/arm-realview-pb1176.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/arm-realview-pb1176.dts
index 366687fb1ee3..e794a4bb8f1f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -435,7 +435,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-370.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-370.dtsi
index 46e6d3ed8f35..c042c416a94a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-370.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-370.dtsi
@@ -74,7 +74,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-375.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-375.dtsi
index 7f2f24a29e6c..352a2f7ba311 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-375.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-375.dtsi
@@ -582,7 +582,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-380.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..7146cc8f082a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-380.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-380.dtsi
@@ -79,7 +79,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -98,7 +98,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 5bd6a66d2c2b..e7649c795699 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -450,7 +456,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
@@ -471,7 +487,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -506,7 +522,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..f081f7cb66e5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-385.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-385.dtsi
@@ -84,7 +84,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -103,7 +103,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -125,7 +125,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-38x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..df3c8d1d8f64 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-38x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-39x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-39x.dtsi
index e0b7c2099831..9525e7b7f436 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-39x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-39x.dtsi
@@ -453,7 +453,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -472,7 +472,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -494,7 +494,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 8558bf6bb54c..d55fe162fc7f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -97,7 +97,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -115,7 +115,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -133,7 +133,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -151,7 +151,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..fdcc81819940 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -112,7 +112,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -130,7 +130,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -148,7 +148,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -166,7 +166,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -184,7 +184,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -202,7 +202,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -220,7 +220,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -238,7 +238,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/artpec6-devboard.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/artpec6-devboard.dts
index d20d95359b28..042a9cc920c6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/artpec6-devboard.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/artpec6-devboard.dts
@@ -1,10 +1,5 @@
-/*
- * Axis ARTPEC-6 development board.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
 
 /dts-v1/;
 #include "artpec6.dtsi"
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 1d24b394ea4c..a497dd135491 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
index dd7148060c4a..d0a5c2ff0fec 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
@@ -5,6 +5,7 @@
 
 / {
 	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
 
 	/delete-node/regulator-vcc-sdhci0;
 	/delete-node/regulator-vcc-sdhci1;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..b8e55bf167aa 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
@@ -103,7 +103,7 @@
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -114,7 +114,7 @@
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index 9b4cf5ebe6d5..c62aff908ab4 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -63,7 +63,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout.dtsi"
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 2efd70666738..af7ea7cab8cf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -231,6 +231,21 @@
 			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &gpio0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6419c9762c0b..6c9f34396a3a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -246,6 +246,21 @@
 			linux,code = <11>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &ehci1 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 6dde51c2aed3..ac07c240419a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,11 +117,6 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
-	};
-
 	pinctrl_fwspiwp_default: fwspiwp_default {
 		function = "FWSPIWP";
 		groups = "FWSPIWP";
@@ -653,12 +648,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e5724b1a2e20 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -364,6 +364,41 @@
 				status = "disabled";
 			};
 
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
index b1068cca4228..fd8dc1183b3e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -233,10 +233,9 @@
 		status = "okay";
 
 		eeprom@53 {
-			compatible = "atmel,24c32";
+			compatible = "atmel,24c02";
 			reg = <0x53>;
 			pagesize = <16>;
-			size = <128>;
 			status = "okay";
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 025a78310e3a..a818e8ebd638 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -68,8 +68,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -87,8 +87,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -110,8 +110,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -152,8 +152,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -167,9 +167,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
index e06b58724ca8..4ebbbe65c0ce 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -197,8 +197,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -216,8 +216,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -235,8 +235,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -258,7 +258,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -273,8 +272,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -288,8 +287,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -323,21 +322,21 @@
 	status = "okay";
 
 	eeprom@50 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 		status = "okay";
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
 		status = "disabled";
 	};
 
 	eeprom@53 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d72c042f2850..a49c2966b41e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -57,8 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -171,8 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index d241c24f0d83..e519d2747936 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -81,8 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -140,7 +140,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
index f3d6aaa3a78d..0ba856066ffb 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -169,8 +169,8 @@
 			regulators {
 				vdd_3v3: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -188,8 +188,8 @@
 
 				vddioddr: VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1450000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -209,8 +209,8 @@
 
 				vddcore: VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -228,8 +228,8 @@
 
 				vddcpu: VDD_OTHER {
 					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <1125000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-ramp-delay = <3125>;
@@ -248,8 +248,8 @@
 
 				vldo1: LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -403,7 +403,7 @@
 	pinctrl_flx3_default: flx3_default {
 		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
+		bias-pull-up;
 	};
 
 	pinctrl_flx4_default: flx4_default {
@@ -659,7 +659,7 @@
 };
 
 &shdwc {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..7e5c598e7e68 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-tse850-3.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91rm9200.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91rm9200.dtsi
index d1181ead18e5..21344fbc89e5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91rm9200.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91rm9200.dtsi
@@ -660,7 +660,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9261ek.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8..8f3b483bb64d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9261ek.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9263ek.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91sam9263ek.dts
index 71f60576761a..df206bdb6788 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9263ek.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91sam9263ek.dts
@@ -148,7 +148,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 87bb39060e8b..4783e657b4cb 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -84,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -219,6 +228,12 @@
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
index 748df7955ae6..e96ddb2e26e2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts
index f4d2fc20397c..c53d9eb0b802 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -28,12 +28,12 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };
 
 &genet_mdio {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2711.dtsi
index 3b60297af7f6..da0eb8702602 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2711.dtsi
@@ -133,7 +133,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -144,7 +144,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -155,7 +155,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -166,7 +166,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -449,8 +450,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -458,12 +457,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -472,6 +485,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -480,6 +500,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -488,6 +515,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -506,11 +555,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -576,6 +631,8 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
+	gpio-ranges = <&gpio 0 0 58>;
+
 	gpclk0_gpio49: gpclk0_gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
@@ -1083,6 +1140,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 1b63d6b19750..25d87212cefd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -53,18 +53,17 @@
 			  "GPIO18",
 			  "NC", /* GPIO19 */
 			  "NC", /* GPIO20 */
-			  "GPIO21",
+			  "CAM_GPIO0",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
 			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
 			  "NC", /* GPIO32 */
 			  "NC", /* GPIO33 */
 			  "NC", /* GPIO34 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 33b2b77aa47d..00582eb2c12e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -74,16 +74,18 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
 			  "NC", /* GPIO42 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 61010266ca9a..90472e76a313 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -45,7 +45,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..a2ef43c2105a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -63,8 +63,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
@@ -77,7 +77,7 @@
 };
 
 &hdmi {
-	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm283x.dtsi
index a3e06b680947..c113661a6668 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm283x.dtsi
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
index cd797b4202ad..01c48faabfad 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -19,7 +19,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 61c7b137607e..7900aac4f35a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,7 +20,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 6c6bb7b17d27..7546c8d07bcd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index d29e7f80ea6a..beae9eab9cb8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index 9b6887d477d8..7879f7d7d9c3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 7989a53597d4..56d309dbc6b0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 87b655be674c..184e3039aa86 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,7 +30,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..c2a266a439d0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 05d4f2931772..9bef6b9bfa8d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -129,7 +129,7 @@
 		};
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
 		mdio@200 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 452b8d0ab180..b0d8a688141d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,7 +16,7 @@
 		bootargs = "earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index 57ca1cfaecd8..5901160919dc 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -26,7 +26,6 @@
 		wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		system {
@@ -46,3 +45,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 2e1a7e382cb7..8e7483272d47 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -26,7 +26,6 @@
 		5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		system {
@@ -42,7 +41,6 @@
 		2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
@@ -83,3 +81,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..ca2266b936ee
--- /dev/null
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a..edf9910100b0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -20,7 +20,7 @@
 		bootargs = " console=ttyS0,115200n8 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;
 		device_type = "memory";
 	};
@@ -195,3 +195,25 @@
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm5301x.dtsi
index f92089290ccd..b4b73ab99626 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	chipcommonA@18000000 {
+	chipcommon-a-bus@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
 		#address-cells = <1>;
@@ -44,7 +44,7 @@
 		};
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -242,6 +242,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -369,8 +371,8 @@
 		#address-cells = <1>;
 	};
 
-	mdio-bus-mux@18003000 {
-		compatible = "mdio-mux-mmioreg";
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -408,27 +410,27 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
 
-	dmu@1800c000 {
+	dmu-bus@1800c000 {
 		compatible = "simple-bus";
 		ranges = <0 0x1800c000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		cru@100 {
-			compatible = "simple-bus";
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
 			reg = <0x100 0x1a4>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			lcpll0: lcpll0@100 {
+			lcpll0: clock-controller@100 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-lcpll0";
 				reg = <0x100 0x14>;
@@ -437,7 +439,7 @@
 						     "sdio", "ddr_phy";
 			};
 
-			genpll: genpll@140 {
+			genpll: clock-controller@140 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-genpll";
 				reg = <0x140 0x24>;
@@ -448,7 +450,12 @@
 						     "sata1", "sata2";
 			};
 
-			pinctrl: pin-controller@1c0 {
+			syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
@@ -535,7 +542,6 @@
 				  "spi_lr_session_done",
 				  "spi_lr_overread";
 		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53573.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm53573.dtsi
index 51546fccc616..eed1a6147f0b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53573.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm53573.dtsi
@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
@@ -156,8 +159,6 @@
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
@@ -180,6 +181,24 @@
 
 		gmac0: ethernet@5000 {
 			reg = <0x5000 0x1000>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					/* ports are defined in board DTS */
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
 		};
 
 		gmac1: ethernet@b000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94708.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94708.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94709.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94709.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts
index b0b8c774a37f..1f0be30e5443 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dm814x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dm814x.dtsi
index 7702e048e110..379abf90c765 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dm814x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dm814x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/clock/dm814.h>
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dm816x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dm816x.dtsi
index a9e7274806f4..ce62f1fa1faf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dm816x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dm816x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/clock/dm816.h>
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dove.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dove.dtsi
index 89e0bdaf3a85..726d353eda68 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dove.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dove.dtsi
@@ -129,7 +129,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra62x.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra62x.dtsi
index cc4878aaa8ea..cfefa670515c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra62x.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra62x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include "dm814x.dtsi"
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
index e75569383dd8..747ff0db90c7 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7x SoC DSPEVE thermal
  *
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-iva-thermal.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7-iva-thermal.dtsi
index a7077321613f..0a31313065df 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7x SoC IVA thermal
  *
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..3fdb79b0e8bf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7-l4.dtsi
@@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;
 
 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;
 
 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";
@@ -3482,8 +3484,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3511,7 +3512,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
@@ -4189,11 +4190,11 @@
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7.dtsi
index dfc1ef8ef6ae..0cb5ec39e33a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/dra7.dtsi
@@ -144,7 +144,7 @@
 
 		l3-noc@44000000 {
 			compatible = "ti,dra7-l3-noc";
-			reg = <0x44000000 0x1000>,
+			reg = <0x44000000 0x1000000>,
 			      <0x45000000 0x1000>;
 			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -1320,20 +1320,20 @@
 };
 
 /* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
 
-&timer4_target {
+&timer16_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/e60k02.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/e60k02.dtsi
index cfb239d5186a..54b4de6a5925 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/e60k02.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/e60k02.dtsi
@@ -302,6 +302,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
index f6ba5e426040..7562497c45dd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -249,7 +249,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4.dtsi
index eab77a66ae8f..201e2fe7ed0c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
index 55922176807e..8232d843bfe0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -200,8 +200,8 @@
 			power-on-delay = <10>;
 			reset-delay = <10>;
 
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
+			panel-width-mm = <56>;
+			panel-height-mm = <93>;
 
 			display-timings {
 				timing {
@@ -520,6 +520,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
@@ -827,7 +835,7 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts
index d5797a67bf48..4cf6ee4a813f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -84,7 +84,7 @@
 &keypad {
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4210.dtsi
index 7e7d65ce6585..ac62d8dc70b1 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4210.dtsi
@@ -393,7 +393,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..fbfc04f9a04c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -179,7 +179,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
index 968c7943653e..49843e016828 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -585,7 +585,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-origen.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-origen.dts
index 5479ef09f9f3..68ed31821a28 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-origen.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-origen.dts
@@ -95,7 +95,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
@@ -448,7 +448,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-smdk4412.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-smdk4412.dts
index cc99b955af0c..deebed6ea003 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -65,7 +65,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..d7d756614edd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -260,7 +260,7 @@
 	};
 
 	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..e4861415a0fe 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -126,7 +129,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -286,7 +289,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5250.dtsi
index 4ffa9253b566..de0275df807f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5250.dtsi
@@ -1119,7 +1119,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..3765f5ba03f2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -120,7 +120,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..07f65213aae6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5420.dtsi
index e23e8ffb093f..4fb4804830af 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5420.dtsi
@@ -602,7 +602,7 @@
 		};
 
 		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
+			compatible = "samsung,exynos5420-mipi-video-phy";
 			syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d91f7fa2cf80..e57d3e464434 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -29,7 +29,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -84,7 +84,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -128,7 +128,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -172,7 +172,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -216,7 +216,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..0b27e968c6fd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +139,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +212,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +285,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +358,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
index 13112a8a5dd8..6544c730340f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx1-ads.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx1-ads.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx1-apf9328.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx1-apf9328.dts
index 77b21aa7a146..27e72b07b517 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx1-apf9328.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx1.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx1.dtsi
index 9b940987864c..8d6e900a9081 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx1.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx1.dtsi
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-evk.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-evk.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-sansa.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx23-sansa.dts
index 46057d9bf555..c2efcc20ae80 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-sansa.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx23.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx23.dtsi
index 7f4c602454a5..b236d23f8071 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx23.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx23.dtsi
@@ -59,7 +59,7 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <0 14 20 0
@@ -414,7 +414,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7 5 9 26
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index 7d4301b22b90..1ed3fb7b9ce6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-pdk.dts linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-pdk.dts
index fb66884d8a2f..59b40d13a640 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx25-pdk.dts
+++ linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25-pdk.dts
@@ -78,7 +78,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx25.dtsi linux-libre-5.15.187-gnu/arch/arm/boot/dts/imx25.dtsi
index 867c409d6b1a..de166b30f4da 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/