diff --git linux-libre-6.1-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-6.1.22-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 8e2c2c405db2..3becc9a82bdf 100644
--- linux-libre-6.1-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-6.1.22-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -22,6 +22,7 @@ Date:           Oct 25, 2019
 KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The largest number of work descriptors in a batch.
+                It's not visible when the device does not support batch.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
 Date:           Oct 25, 2019
@@ -49,6 +50,8 @@ Description:    The total number of read buffers supported by this device.
 		The read buffers represent resources within the DSA
 		implementation, and these resources are allocated by engines to
 		support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
 Date:           Oct 25, 2019
@@ -122,6 +125,8 @@ Contact:        dmaengine@vger.kernel.org
 Description:    The maximum number of read buffers that may be in use at
 		one time by operations that access low bandwidth memory in the
 		device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
 Date:		Aug 28, 2020
@@ -205,6 +210,7 @@ KernelVersion:	5.10.0
 Contact:	dmaengine@vger.kernel.org
 Description:	The max batch size for this workqueue. Cannot exceed device
 		max batch size. Configurable parameter.
+		It's not visible when the device does not support batch.
 
 What:		/sys/bus/dsa/devices/wq<m>.<n>/ats_disable
 Date:		Nov 13, 2020
@@ -250,6 +256,8 @@ KernelVersion:	5.17.0
 Contact:	dmaengine@vger.kernel.org
 Description:	Enable the use of global read buffer limit for the group. See DSA
 		spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
 Date:		Dec 10, 2021
@@ -258,6 +266,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates max number of read buffers that may be in use at one time
 		by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
 		Buffers Allowed.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
 Date:		Dec 10, 2021
@@ -266,6 +276,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates the number of Read Buffers reserved for the use of
 		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
 		Reserved.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
 Date:		Sept 14, 2022
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-6.1.22-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 611b23e6488d..feb3f2cc0c16 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-6.1.22-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -52,7 +52,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor linux-libre-6.1.22-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..e9ef69aef20b 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ linux-libre-6.1.22-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-6.1.22-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-6.1.22-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-6.1.22-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-6.1.22-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-6.1.22-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
index 5b86245450bd..2524061836ac 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -86,6 +86,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -716,8 +718,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst linux-libre-6.1.22-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
new file mode 100644
index 000000000000..ec6e9f5bcf9e
--- /dev/null
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
@@ -0,0 +1,92 @@
+
+.. SPDX-License-Identifier: GPL-2.0
+
+Cross-Thread Return Address Predictions
+=======================================
+
+Certain AMD and Hygon processors are subject to a cross-thread return address
+predictions vulnerability. When running in SMT mode and one sibling thread
+transitions out of C0 state, the other sibling thread could use return target
+predictions from the sibling thread that transitioned out of C0.
+
+The Spectre v2 mitigations protect the Linux kernel, as it fills the return
+address prediction entries with safe targets when context switching to the idle
+thread. However, KVM does allow a VMM to prevent exiting guest mode when
+transitioning out of C0. This could result in a guest-controlled return target
+being consumed by the sibling thread.
+
+Affected processors
+-------------------
+
+The following CPUs are vulnerable:
+
+    - AMD Family 17h processors
+    - Hygon Family 18h processors
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =======================================
+   CVE-2022-27672  Cross-Thread Return Address Predictions
+   ==============  =======================================
+
+Problem
+-------
+
+Affected SMT-capable processors support 1T and 2T modes of execution when SMT
+is enabled. In 2T mode, both threads in a core are executing code. For the
+processor core to enter 1T mode, it is required that one of the threads
+requests to transition out of the C0 state. This can be communicated with the
+HLT instruction or with an MWAIT instruction that requests non-C0.
+When the thread re-enters the C0 state, the processor transitions back
+to 2T mode, assuming the other thread is also still in C0 state.
+
+In affected processors, the return address predictor (RAP) is partitioned
+depending on the SMT mode. For instance, in 2T mode each thread uses a private
+16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon
+transition between 1T/2T mode, the RAP contents are not modified but the RAP
+pointers (which control the next return target to use for predictions) may
+change. This behavior may result in return targets from one SMT thread being
+used by RET predictions in the sibling thread following a 1T/2T switch. In
+particular, a RET instruction executed immediately after a transition to 1T may
+use a return target from the thread that just became idle. In theory, this
+could lead to information disclosure if the return targets used do not come
+from trustworthy code.
+
+Attack scenarios
+----------------
+
+An attack can be mounted on affected processors by performing a series of CALL
+instructions with targeted return locations and then transitioning out of C0
+state.
+
+Mitigation mechanism
+--------------------
+
+Before entering idle state, the kernel context switches to the idle thread. The
+context switch fills the RAP entries (referred to as the RSB in Linux) with safe
+targets by performing a sequence of CALL instructions.
+
+Prevent a guest VM from directly putting the processor into an idle state by
+intercepting HLT and MWAIT instructions.
+
+Both mitigations are required to fully address this issue.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Use existing Spectre v2 mitigations that will fill the RSB on context switch.
+
+Mitigation control for KVM - module parameter
+---------------------------------------------
+
+By default, the KVM hypervisor mitigates this issue by intercepting guest
+attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS
+capability to override those interceptions, but since this is not common, the
+mitigation that covers this path is not enabled by default.
+
+The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on
+using the boolean module parameter mitigate_smt_rsb, e.g.:
+        kvm.mitigate_smt_rsb=1
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.1.22-gnu/Documentation/admin-guide/hw-vuln/index.rst
index 4df436e7c417..e0614760a99e 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -18,3 +18,4 @@ are configurable at compile, boot or run time.
    core-scheduling.rst
    l1d_flush.rst
    processor_mmio_stale_data.rst
+   cross-thread-rsb.rst
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.1.22-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index c4dcdb3d0d45..a39bbfe9526b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -479,8 +479,16 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks, including cross-thread branch target injections
+   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+   Legacy IBRS systems clear the IBRS bit on exit to userspace and
+   therefore explicitly enable STIBP for that
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -504,9 +512,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-6.1.22-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.1.22-gnu/Documentation/admin-guide/kernel-parameters.txt
index 42af9ca0127e..6b838869554b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -2300,7 +2300,13 @@
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
@@ -2312,7 +2318,13 @@
 			Provide an override to the HPET-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map HPET-ID decimal 0 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
@@ -2323,15 +2335,20 @@
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
 
 			For example, to map UART-HID:UID AMD0020:0 to
 			PCI segment 0x1 and PCI device ID 00:14.5,
 			write the parameter as:
-				ivrs_acpihid[0001:00:14.5]=AMD0020:0
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
 
-			By default, PCI segment is 0, and can be omitted.
-			For example, PCI device 00:14.5 write the parameter as:
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst linux-libre-6.1.22-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
index 294ebbdb22af..bbe66480ff85 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -15,10 +15,10 @@ HiSilicon PCIe PMU driver
 The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe
 Core id.::
 
-  /sys/bus/event_source/hisi_pcie<sicl>_<core>
+  /sys/bus/event_source/hisi_pcie<sicl>_core<core>
 
 PMU driver provides description of available events and filter options in sysfs,
-see /sys/bus/event_source/devices/hisi_pcie<sicl>_<core>.
+see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>.
 
 The "format" directory describes all formats of the config (events) and config1
 (filter options) fields of the perf_event_attr structure. The "events" directory
@@ -33,13 +33,13 @@ monitored by PMU.
 Example usage of perf::
 
   $# perf list
-  hisi_pcie0_0/rx_mwr_latency/ [kernel PMU event]
-  hisi_pcie0_0/rx_mwr_cnt/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
   ------------------------------------------
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency/
-  $# perf stat -e hisi_pcie0_0/rx_mwr_cnt/
-  $# perf stat -g -e hisi_pcie0_0/rx_mwr_latency/ -e hisi_pcie0_0/rx_mwr_cnt/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported for PCIe PMU.
@@ -64,7 +64,7 @@ bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency,port=0x1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
 
 -bdf
 
@@ -76,7 +76,7 @@ For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,bdf=0x3900/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
 
 2. Trigger filter
 Event statistics start when the first time TLP length is greater/smaller
@@ -90,7 +90,7 @@ means start when TLP length < condition.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
 
 3. Threshold filter
 Counter counts when TLP length within the specified range. You can set the
@@ -103,4 +103,4 @@ when TLP length < threshold.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.1.22-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 98d1b198b2b4..b3588fff1ec0 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.1.22-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -667,6 +667,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -1314,6 +1323,29 @@ watchdog work to be queued by the watchdog timer function, otherwise the NMI
 watchdog — if enabled — can detect a hard lockup condition.
 
 
+split_lock_mitigate (x86 only)
+==============================
+
+On x86, each "split lock" imposes a system-wide performance penalty. On larger
+systems, large numbers of split locks from unprivileged users can result in
+denials of service to well-behaved and potentially more important users.
+
+The kernel mitigates these bad users by detecting split locks and imposing
+penalties: forcing them to wait and only allowing one core to execute split
+locks at a time.
+
+These mitigations can make those bad applications unbearably slow. Setting
+split_lock_mitigate=0 may restore some application performance, but will also
+increase system exposure to denial of service attacks from split lock users.
+
+= ===================================================================
+0 Disable the mitigation mode - just warns the split lock on kernel log
+  and exposes the system to denials of service from the split lockers.
+1 Enable the mitigation mode (this is the default) - penalizes the split
+  lockers with intentional performance degradation.
+= ===================================================================
+
+
 stack_erasing
 =============
 
@@ -1500,6 +1532,16 @@ entry will default to 2 instead of 0.
 2 Unprivileged calls to ``bpf()`` are disabled
 = =============================================================
 
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog
 ========
 
diff --git linux-libre-6.1-gnu/Documentation/bpf/instruction-set.rst linux-libre-6.1.22-gnu/Documentation/bpf/instruction-set.rst
index 5d798437dad4..3ba6475cfbfc 100644
--- linux-libre-6.1-gnu/Documentation/bpf/instruction-set.rst
+++ linux-libre-6.1.22-gnu/Documentation/bpf/instruction-set.rst
@@ -99,19 +99,26 @@ code      value  description
 BPF_ADD   0x00   dst += src
 BPF_SUB   0x10   dst -= src
 BPF_MUL   0x20   dst \*= src
-BPF_DIV   0x30   dst /= src
+BPF_DIV   0x30   dst = (src != 0) ? (dst / src) : 0
 BPF_OR    0x40   dst \|= src
 BPF_AND   0x50   dst &= src
 BPF_LSH   0x60   dst <<= src
 BPF_RSH   0x70   dst >>= src
 BPF_NEG   0x80   dst = ~src
-BPF_MOD   0x90   dst %= src
+BPF_MOD   0x90   dst = (src != 0) ? (dst % src) : dst
 BPF_XOR   0xa0   dst ^= src
 BPF_MOV   0xb0   dst = src
 BPF_ARSH  0xc0   sign extending shift right
 BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 ========  =====  ==========================================================
 
+Underflow and overflow are allowed during arithmetic operations, meaning
+the 64-bit or 32-bit value will wrap. If eBPF program execution would
+result in division by zero, the destination register is instead set to zero.
+If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
+the destination register is unchanged whereas for ``BPF_ALU`` the upper
+32 bits of the destination register are zeroed.
+
 ``BPF_ADD | BPF_X | BPF_ALU`` means::
 
   dst_reg = (u32) dst_reg + (u32) src_reg;
@@ -128,6 +135,11 @@ BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 
   src_reg = src_reg ^ imm32
 
+Also note that the division and modulo operations are unsigned. Thus, for
+``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
+for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
+interpreted as an unsigned 64-bit value. There are no instructions for
+signed division or modulo.
 
 Byte swap instructions
 ~~~~~~~~~~~~~~~~~~~~~~
diff --git linux-libre-6.1-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-6.1.22-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17a..895285c037c7 100644
--- linux-libre-6.1-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-6.1.22-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 63fb02014a56..117e3db43f84 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -32,7 +32,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8186-disp-ccorr
-          - const: mediatek,mt8183-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
 
   reg:
     maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 3b609c19e0bc..6c5b4783812a 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -32,7 +32,7 @@ properties:
       - description: Display byte clock
       - description: Display byte interface clock
       - description: Display pixel clock
-      - description: Display escape clock
+      - description: Display core clock
       - description: Display AHB clock
       - description: Display AXI clock
 
@@ -134,8 +134,6 @@ required:
   - phy-names
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
 additionalProperties: false
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index d9ad8b659f58..3ec466c3ab38 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -69,7 +69,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 1342d74ecfe0..0a7b5f110d88 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -38,7 +38,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 3d8540a06fe2..2f1fd140c87d 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -34,6 +34,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
index c46378efc123..92e899905ef8 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,i2c-r9a09g011  # RZ/V2M
+          - renesas,r9a09g011-i2c  # RZ/V2M
       - const: renesas,rzv2m-i2c
 
   reg:
@@ -66,7 +66,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@a4030000 {
-        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
         reg = <0xa4030000 0x80>;
         interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
                      <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 02e605fac408..9ddba7f2e7aa 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -473,9 +473,6 @@ patternProperties:
               Specifies whether the event is to be interpreted as a key (1)
               or a switch (5).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     dependencies:
@@ -501,7 +498,7 @@ patternProperties:
 
       azoteq,slider-size:
         $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
+        minimum: 1
         maximum: 65535
         description:
           Specifies the slider's one-dimensional resolution, equal to the
@@ -575,9 +572,9 @@ patternProperties:
           linux,code: true
 
           azoteq,gesture-max-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 1020
+            maximum: 4080
             description:
               Specifies the length of time (in ms) within which a tap, swipe
               or flick gesture must be completed in order to be acknowledged
@@ -585,9 +582,9 @@ patternProperties:
               gesture applies to all remaining swipe or flick gestures.
 
           azoteq,gesture-min-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 124
+            maximum: 496
             description:
               Specifies the length of time (in ms) for which a tap gesture must
               be held in order to be acknowledged by the device.
@@ -620,9 +617,6 @@ patternProperties:
               GPIO, they must all be of the same type (proximity, touch or
               slider gesture).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     required:
@@ -693,6 +687,7 @@ allOf:
           properties:
             azoteq,slider-size:
               multipleOf: 16
+              minimum: 16
               maximum: 4080
 
             azoteq,top-speed:
@@ -935,14 +930,14 @@ examples:
 
                             event-tap {
                                     linux,code = <KEY_PLAYPAUSE>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-min-ms = <24>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
                             };
 
                             event-flick-pos {
                                     linux,code = <KEY_NEXTSONG>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-dist = <816>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
                             };
 
                             event-flick-neg {
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 6a3e3ede1ede..777f2da52f1e 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -98,6 +98,10 @@ properties:
     type: object
     $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
 
+  pwm:
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
 patternProperties:
   "^adc@[0-9a-f]+$":
     type: object
@@ -123,10 +127,6 @@ patternProperties:
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
 
-  "pwm@[0-9a-f]+$":
-    type: object
-    $ref: /schemas/leds/leds-qcom-lpg.yaml#
-
   "^rtc@[0-9a-f]+$":
     type: object
     $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 376e739bcad4..49b4f7a32e71 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -61,7 +58,7 @@ properties:
       - const: pcie
       - const: pcie_bus
       - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -175,6 +172,47 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_inbound_axi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 48ed227fc5b9..53da2edd7c9a 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
similarity index 85%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
index f3a5fbabbbb5..bb01c6b34dab 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB2 PHY
@@ -13,8 +13,8 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb2-phy
-      - amlogic,meson-a1-usb2-phy
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -68,7 +68,7 @@ additionalProperties: false
 examples:
   - |
     phy@36000 {
-          compatible = "amlogic,meson-g12a-usb2-phy";
+          compatible = "amlogic,g12a-usb2-phy";
           reg = <0x36000 0x2000>;
           clocks = <&xtal>;
           clock-names = "xtal";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 868b4e6fde71..129d26e99776 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -49,7 +49,7 @@ additionalProperties: false
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 89b8f3dd67a1..3342847dcb19 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -87,6 +87,8 @@ patternProperties:
           "wifi_led"        "led"       1, 2
           "i2c"             "i2c"       3, 4
           "uart1_0"         "uart"      7, 8, 9, 10
+          "uart1_rx_tx"     "uart"      42, 43
+          "uart1_cts_rts"   "uart"      44, 45
           "pcie_clk"        "pcie"      9
           "pcie_wake"       "pcie"      10
           "spi1_0"          "spi"       11, 12, 13, 14
@@ -98,9 +100,11 @@ patternProperties:
           "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
                                         31, 32
           "spi1_1"          "spi"       23, 24, 25, 26
-          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_2_rx_tx"   "uart"      29, 30
+          "uart1_2_cts_rts" "uart"      31, 32
           "uart1_1"         "uart"      23, 24, 25, 26
-          "uart2_0"         "uart"      29, 30, 31, 32
+          "uart2_0_rx_tx"   "uart"      29, 30
+          "uart2_0_cts_rts" "uart"      31, 32
           "spi0"            "spi"       33, 34, 35, 36
           "spi0_wp_hold"    "spi"       37, 38
           "uart1_3_rx_tx"   "uart"      35, 36
@@ -157,7 +161,7 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  enum: [emmc_45, emmc_51]
           - if:
               properties:
                 function:
@@ -221,8 +225,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
-                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+                  items:
+                    enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1,
+                           uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx,
+                           uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts,
+                           uart2_1, uart0, uart1, uart2]
+                  maxItems: 2
           - if:
               properties:
                 function:
@@ -356,6 +364,27 @@ examples:
         interrupt-parent = <&gic>;
         #interrupt-cells = <2>;
 
+        pcie_pins: pcie-pins {
+          mux {
+            function = "pcie";
+            groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+          };
+        };
+
+        pwm_pins: pwm-pins {
+          mux {
+            function = "pwm";
+            groups = "pwm0", "pwm1_0";
+          };
+        };
+
+        spi0_pins: spi0-pins {
+          mux {
+            function = "spi";
+            groups = "spi0", "spi0_wp_hold";
+          };
+        };
+
         uart1_pins: uart1-pins {
           mux {
             function = "uart";
@@ -363,6 +392,13 @@ examples:
           };
         };
 
+        uart1_3_pins: uart1-3-pins {
+          mux {
+            function = "uart";
+            groups = "uart1_3_rx_tx", "uart1_3_cts_rts";
+          };
+        };
+
         uart2_pins: uart2-pins {
           mux {
             function = "uart";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
index a7fae1772a81..cd8e9a8907f8 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
@@ -30,7 +30,9 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    enum: [2, 3]
+    description:
+      The only flag supported by the controller is PWM_POLARITY_INVERTED.
 
   microchip,sync-update-mask:
     description: |
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
index 01f9d4e236e9..a7feb497eb89 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -19,8 +19,8 @@ description: |
   additional information and example.
 
 patternProperties:
-  # 25 LDOs
-  "^LDO([1-9]|[1][0-9]|2[0-5])$":
+  # 25 LDOs, without LDO10-12
+  "^LDO([1-9]|1[3-9]|2[0-5])$":
     type: object
     $ref: regulator.yaml#
     unevaluatedProperties: false
@@ -30,6 +30,23 @@ patternProperties:
     required:
       - regulator-name
 
+  "^LDO(1[0-2])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      samsung,ext-control-gpios:
+        maxItems: 1
+        description:
+          LDO10, LDO11 and LDO12 can be configured to external control over
+          GPIO.
+
+    required:
+      - regulator-name
+
   # 5 bucks
   "^BUCK[1-5]$":
     type: object
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
index 90a7cabf58fe..d4148418350c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -80,7 +80,7 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
     $ref: "/schemas/types.yaml#/definitions/string"
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 5b8d59245f82..b358fd601ed3 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -62,7 +62,7 @@ patternProperties:
         description: phandle of the CPU DAI
 
     patternProperties:
-      "^codec-[0-9]+$":
+      "^codec(-[0-9]+)?$":
         type: object
         additionalProperties: false
         description: |-
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml
old mode 100755
new mode 100644
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/rt5682.txt linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
index c5f2b8febcee..6b87db68337c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
+++ linux-libre-6.1.22-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -46,7 +46,7 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
-- #sound-dai-cells: Should be set to '<0>'.
+- #sound-dai-cells: Should be set to '<1>'.
 
 Pins on the device (for linking into audio routes) for RT5682:
 
diff --git linux-libre-6.1-gnu/Documentation/driver-api/spi.rst linux-libre-6.1.22-gnu/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-6.1-gnu/Documentation/driver-api/spi.rst
+++ linux-libre-6.1.22-gnu/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-6.1-gnu/Documentation/fault-injection/fault-injection.rst linux-libre-6.1.22-gnu/Documentation/fault-injection/fault-injection.rst
index 17779a2772e5..5f6454b9dbd4 100644
--- linux-libre-6.1-gnu/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-6.1.22-gnu/Documentation/fault-injection/fault-injection.rst
@@ -83,9 +83,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most. A value of -1
-	means "no limit". Note, though, that this file only accepts unsigned
-	values. So, if you want to specify -1, you better use 'printf' instead
-	of 'echo', e.g.: $ printf %#x -1 > times
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -284,7 +282,7 @@ Application Examples
     echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -338,7 +336,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -369,7 +367,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
 
diff --git linux-libre-6.1-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.1.22-gnu/Documentation/filesystems/mount_api.rst
index eb358a00be27..1d16787a00e9 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.1.22-gnu/Documentation/filesystems/mount_api.rst
@@ -814,6 +814,7 @@ process the parameters it is given.
        int fs_lookup_param(struct fs_context *fc,
 			   struct fs_parameter *value,
 			   bool want_bdev,
+			   unsigned int flags,
 			   struct path *_path);
 
      This takes a parameter that carries a string or filename type and attempts
diff --git linux-libre-6.1-gnu/Documentation/filesystems/vfs.rst linux-libre-6.1.22-gnu/Documentation/filesystems/vfs.rst
index 2b55f71e2ae1..b5e8b8af8afb 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-6.1.22-gnu/Documentation/filesystems/vfs.rst
@@ -1221,7 +1221,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-6.1-gnu/Documentation/gpu/todo.rst linux-libre-6.1.22-gnu/Documentation/gpu/todo.rst
index 393d218e4a0c..b2c6aaf1edf2 100644
--- linux-libre-6.1-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.1.22-gnu/Documentation/gpu/todo.rst
@@ -651,17 +651,6 @@ See drivers/gpu/drm/amd/display/TODO for tasks.
 
 Contact: Harry Wentland, Alex Deucher
 
-vmwgfx: Replace hashtable with Linux' implementation
-----------------------------------------------------
-
-The vmwgfx driver uses its own hashtable implementation. Replace the
-code with Linux' implementation and update the callers. It's mostly a
-refactoring task, but the interfaces are different.
-
-Contact: Zack Rusin, Thomas Zimmermann <tzimmermann@suse.de>
-
-Level: Intermediate
-
 Bootsplash
 ==========
 
diff --git linux-libre-6.1-gnu/Documentation/hwmon/ftsteutates.rst linux-libre-6.1.22-gnu/Documentation/hwmon/ftsteutates.rst
index 58a2483d8d0d..198fa8e2819d 100644
--- linux-libre-6.1-gnu/Documentation/hwmon/ftsteutates.rst
+++ linux-libre-6.1.22-gnu/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 8 fans. It also contains an integrated watchdog which is currently
 implemented in this driver.
 
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
 To clear a temperature or fan alarm, execute the following command with the
 correct path to the alarm file::
 
diff --git linux-libre-6.1-gnu/Documentation/security/keys/trusted-encrypted.rst linux-libre-6.1.22-gnu/Documentation/security/keys/trusted-encrypted.rst
index 0bfb4c339748..9bc9db8ec651 100644
--- linux-libre-6.1-gnu/Documentation/security/keys/trusted-encrypted.rst
+++ linux-libre-6.1.22-gnu/Documentation/security/keys/trusted-encrypted.rst
@@ -350,7 +350,8 @@ Load an encrypted key "evm" from saved blob::
 
 Instantiate an encrypted key "evm" using user-provided decrypted data::
 
-    $ keyctl add encrypted evm "new default user:kmk 32 `cat evm_decrypted_data.blob`" @u
+    $ evmkey=$(dd if=/dev/urandom bs=1 count=32 | xxd -c32 -p)
+    $ keyctl add encrypted evm "new default user:kmk 32 $evmkey" @u
     794890253
 
     $ keyctl print 794890253
diff --git linux-libre-6.1-gnu/Documentation/sphinx/load_config.py linux-libre-6.1.22-gnu/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-6.1-gnu/Documentation/sphinx/load_config.py
+++ linux-libre-6.1.22-gnu/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-6.1-gnu/Documentation/trace/ftrace.rst linux-libre-6.1.22-gnu/Documentation/trace/ftrace.rst
index 60bceb018d6a..21f01d32c959 100644
--- linux-libre-6.1-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-6.1.22-gnu/Documentation/trace/ftrace.rst
@@ -2940,7 +2940,7 @@ Produces::
               bash-1994  [000] ....  4342.324898: ima_get_action <-process_measurement
               bash-1994  [000] ....  4342.324898: ima_match_policy <-ima_get_action
               bash-1994  [000] ....  4342.324899: do_truncate <-do_last
-              bash-1994  [000] ....  4342.324899: should_remove_suid <-do_truncate
+              bash-1994  [000] ....  4342.324899: setattr_should_drop_suidgid <-do_truncate
               bash-1994  [000] ....  4342.324899: notify_change <-do_truncate
               bash-1994  [000] ....  4342.324900: current_fs_time <-notify_change
               bash-1994  [000] ....  4342.324900: current_kernel_time <-current_fs_time
diff --git linux-libre-6.1-gnu/Documentation/trace/kprobes.rst linux-libre-6.1.22-gnu/Documentation/trace/kprobes.rst
index 48cf778a2468..fc7ce76eab65 100644
--- linux-libre-6.1-gnu/Documentation/trace/kprobes.rst
+++ linux-libre-6.1.22-gnu/Documentation/trace/kprobes.rst
@@ -131,8 +131,7 @@ For example, if the function is non-recursive and is called with a
 spinlock held, maxactive = 1 should be enough.  If the function is
 non-recursive and can never relinquish the CPU (e.g., via a semaphore
 or preemption), NR_CPUS should be enough.  If maxactive <= 0, it is
-set to a default value.  If CONFIG_PREEMPT is enabled, the default
-is max(10, 2*NR_CPUS).  Otherwise, the default is NR_CPUS.
+set to a default value: max(10, 2*NR_CPUS).
 
 It's not a disaster if you set maxactive too low; you'll just miss
 some probes.  In the kretprobe struct, the nmissed field is set to
diff --git linux-libre-6.1-gnu/Documentation/virt/kvm/api.rst linux-libre-6.1.22-gnu/Documentation/virt/kvm/api.rst
index 896914e3a847..1bc61bf804f1 100644
--- linux-libre-6.1-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.1.22-gnu/Documentation/virt/kvm/api.rst
@@ -4483,6 +4483,18 @@ not holding a previously reported uncorrected error).
 :Parameters: struct kvm_s390_cmma_log (in, out)
 :Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 
@@ -4563,12 +4575,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 ----------------------------
 
@@ -8248,6 +8254,20 @@ CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``
 It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
 has enabled in-kernel emulation of the local APIC.
 
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems.  Different
+versions of KVM return different values for this information and userspace
+should not rely on it.  Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU.  In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
 Obsolete ioctls and capabilities
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git linux-libre-6.1-gnu/Documentation/virt/kvm/devices/vm.rst linux-libre-6.1.22-gnu/Documentation/virt/kvm/devices/vm.rst
index 60acc39e0e93..147efec626e5 100644
--- linux-libre-6.1-gnu/Documentation/virt/kvm/devices/vm.rst
+++ linux-libre-6.1.22-gnu/Documentation/virt/kvm/devices/vm.rst
@@ -302,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 :Parameters: none
 :Returns:   -ENOMEM if there is not enough free memory to start migration mode;
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined);
diff --git linux-libre-6.1-gnu/Documentation/x86/amd-memory-encryption.rst linux-libre-6.1.22-gnu/Documentation/x86/amd-memory-encryption.rst
index a1940ebe7be5..934310ce7258 100644
--- linux-libre-6.1-gnu/Documentation/x86/amd-memory-encryption.rst
+++ linux-libre-6.1.22-gnu/Documentation/x86/amd-memory-encryption.rst
@@ -95,3 +95,39 @@ by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
 not enable SME, then Linux will not be able to activate memory encryption, even
 if configured to do so by default or the mem_encrypt=on command line parameter
 is specified.
+
+Secure Nested Paging (SNP)
+==========================
+
+SEV-SNP introduces new features (SEV_FEATURES[1:63]) which can be enabled
+by the hypervisor for security enhancements. Some of these features need
+guest side implementation to function correctly. The below table lists the
+expected guest behavior with various possible scenarios of guest/hypervisor
+SNP feature support.
+
++-----------------+---------------+---------------+------------------+
+| Feature Enabled | Guest needs   | Guest has     | Guest boot       |
+| by the HV       | implementation| implementation| behaviour        |
++=================+===============+===============+==================+
+|      No         |      No       |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      Yes      |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      No       |      No       | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      No       | Graceful boot    |
+|                 |               |               | failure          |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      Yes      | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+
+More details in AMD64 APM[1] Vol 2: 15.34.10 SEV_STATUS MSR
+
+[1] https://www.amd.com/system/files/TechDocs/40332.pdf
diff --git linux-libre-6.1-gnu/MAINTAINERS linux-libre-6.1.22-gnu/MAINTAINERS
index 886d3f69ee64..350d7e3ba94f 100644
--- linux-libre-6.1-gnu/MAINTAINERS
+++ linux-libre-6.1.22-gnu/MAINTAINERS
@@ -3444,7 +3444,7 @@ F:	drivers/net/ieee802154/atusb.h
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
-L:	linux-audit@redhat.com (moderated for non-subscribers)
+L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
@@ -11112,6 +11112,8 @@ M:	Kees Cook <keescook@chromium.org>
 L:	linux-hardening@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
+F:	Documentation/ABI/testing/sysfs-kernel-oops_count
+F:	Documentation/ABI/testing/sysfs-kernel-warn_count
 F:	include/linux/overflow.h
 F:	include/linux/randomize_kstack.h
 F:	mm/usercopy.c
diff --git linux-libre-6.1-gnu/Makefile linux-libre-6.1.22-gnu/Makefile
index fddcc9a95e63..1bfb20159436 100644
--- linux-libre-6.1-gnu/Makefile
+++ linux-libre-6.1.22-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 0
+SUBLEVEL = 22
 EXTRAVERSION = -gnu
 NAME = Hurr durr I'ma ninja sloth
 
@@ -93,10 +93,17 @@ endif
 
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
 
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
-  quiet=silent_
-  KBUILD_VERBOSE = 0
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
+else
+silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
+endif
+
+ifeq ($(silence),s)
+quiet=silent_
+KBUILD_VERBOSE = 0
 endif
 
 export quiet Q KBUILD_VERBOSE
@@ -538,7 +545,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 RUSTFLAGS_KERNEL =
 AFLAGS_KERNEL	=
-export LDFLAGS_vmlinux =
+LDFLAGS_vmlinux =
 
 # Use USERINCLUDE when you must reference the UAPI directories only.
 USERINCLUDE    := \
@@ -1232,6 +1239,18 @@ vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
 	@:
 
 PHONY += vmlinux
+# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
+# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
+# unrelated; the decompressors just happen to have the same base name,
+# arch/*/boot/compressed/vmlinux.
+# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
+#
+# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
+#   https://savannah.gnu.org/bugs/?61463
+# For Make > 4.4, the following simple code will work:
+#  vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
 vmlinux: vmlinux.o $(KBUILD_LDS) modpost
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
 
@@ -1517,6 +1536,7 @@ endif
 # *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFOBTF_MODULES
 # is an exception.
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
+KBUILD_BUILTIN := 1
 modules: vmlinux
 endif
 
diff --git linux-libre-6.1-gnu/arch/Kconfig linux-libre-6.1.22-gnu/arch/Kconfig
index 8f138e580d1a..81599f5c17b0 100644
--- linux-libre-6.1-gnu/arch/Kconfig
+++ linux-libre-6.1.22-gnu/arch/Kconfig
@@ -635,7 +635,7 @@ config ARCH_SUPPORTS_SHADOW_CALL_STACK
 config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
-	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
diff --git linux-libre-6.1-gnu/arch/alpha/boot/tools/objstrip.c linux-libre-6.1.22-gnu/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- linux-libre-6.1-gnu/arch/alpha/boot/tools/objstrip.c
+++ linux-libre-6.1.22-gnu/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git linux-libre-6.1-gnu/arch/alpha/include/asm/thread_info.h linux-libre-6.1.22-gnu/arch/alpha/include/asm/thread_info.h
index fdc485d7787a..084c27cb0c70 100644
--- linux-libre-6.1-gnu/arch/alpha/include/asm/thread_info.h
+++ linux-libre-6.1.22-gnu/arch/alpha/include/asm/thread_info.h
@@ -75,7 +75,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/entry.S linux-libre-6.1.22-gnu/arch/alpha/kernel/entry.S
index e227f3a29a43..c41a5a9c3b9f 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-6.1.22-gnu/arch/alpha/kernel/entry.S
@@ -469,8 +469,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/module.c linux-libre-6.1.22-gnu/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/module.c
+++ linux-libre-6.1.22-gnu/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/traps.c linux-libre-6.1.22-gnu/arch/alpha/kernel/traps.c
index 8a66fe544c69..d9a67b370e04 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-6.1.22-gnu/arch/alpha/kernel/traps.c
@@ -233,7 +233,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -366,20 +380,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-370.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-370.dtsi
index 9dc928859ad3..2013a5ccecd3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-370.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-370.dtsi
@@ -84,7 +84,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-375.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-375.dtsi
index 929deaf312a5..c310ef26d1cc 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-375.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-375.dtsi
@@ -592,7 +592,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-380.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-380.dtsi
index ce1dddb2269b..e94f22b0e9b5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-380.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-380.dtsi
@@ -89,7 +89,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -118,7 +118,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 72ac807cae25..0c1f238e4c30 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -483,7 +489,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-385.dtsi
index 83392b92dae2..be8d607c59b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-385.dtsi
@@ -93,7 +93,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -121,7 +121,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-39x.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-39x.dtsi
index 923b035a3ab3..9d1cac49c022 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-39x.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-39x.dtsi
@@ -463,7 +463,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -492,7 +492,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -524,7 +524,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index bf9360f41e0a..5ea9d509cd30 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -107,7 +107,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -135,7 +135,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -163,7 +163,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -191,7 +191,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 0714af52e607..6c6fbb9faf5a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -122,7 +122,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -150,7 +150,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -178,7 +178,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -206,7 +206,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -234,7 +234,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -262,7 +262,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -290,7 +290,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -318,7 +318,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index a6a2bc3b855c..fcc890e3ad73 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -162,16 +162,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -179,6 +172,12 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
 		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index bf59a9962379..4879da4cdbd2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -95,14 +95,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -110,6 +105,13 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
 			compatible = "shared-dma-pool";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/dove.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/dove.dtsi
index 00a36fba2fd2..9aee3cfd3e98 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/dove.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/dove.dtsi
@@ -139,7 +139,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/e60k02.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/e60k02.dtsi
index 935e2359f8df..07ae96486385 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/e60k02.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/e60k02.dtsi
@@ -302,6 +302,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/e70k02.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/e70k02.dtsi
index 27ef9a62b23c..a1f9fbd6004a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/e70k02.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/e70k02.dtsi
@@ -312,6 +312,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
index 6d2c7bb19184..2eb682009815 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -250,7 +250,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos4.dtsi
index 5c4ecda27a47..7ba7a18c2500 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos4210.dtsi
index 2c25cc37934e..f8c6c5d1906a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos4210.dtsi
@@ -393,7 +393,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5250.dtsi
index 4708dcd575a7..01751706ff96 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5250.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5250.dtsi
@@ -1107,7 +1107,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d1cbc6b8a570..e18110b93875 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -120,7 +120,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5420.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5420.dtsi
index 9f2523a873d9..62263eb91b3c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5420.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5420.dtsi
@@ -592,7 +592,7 @@
 		};
 
 		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
+			compatible = "samsung,exynos5420-mipi-video-phy";
 			syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 3de7019572a2..5e4280393706 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -31,7 +31,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -86,7 +86,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -130,7 +130,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -174,7 +174,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -218,7 +218,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index a6961ff24030..e6e7e2ff2a26 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +139,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +212,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +285,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +358,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-ppd.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx53-ppd.dts
index 37d0cffea99c..70c4a4852256 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx53-ppd.dts
@@ -488,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..4b81a975c979 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -632,7 +632,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index 663ee9df79e6..d6eee157c63b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -597,6 +597,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
index 162dc259edc8..5a74c7f68eb6 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
index 5162fe227d1e..fdc10563f147 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -52,7 +52,7 @@
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
index 104a85254adb..5afb1674e012 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -64,7 +64,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-smegw01.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
index 546268b8d0b1..c0f00f5db11e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -198,6 +198,7 @@
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
 	dr_mode = "host";
 	status = "okay";
 };
@@ -374,7 +375,7 @@
 
 	pinctrl_usbotg2: usbotg2grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x04
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7s.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7s.dtsi
index 0ebf39915c91..19c5ad0ca91e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7s.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/imx7s.dtsi
@@ -513,7 +513,7 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index d10669fcd527..9e9eba8bad5e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index 491606c4f044..2a394cc15284 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index a0c2d7652625..f7b38bee039b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 3dad32834e5e..f53d45fa1de8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 132e702281fc..87359ab05db3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
index 942aa2278355..a39b940d5853 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1615,7 +1615,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index 44cd72f1b1be..116e59a3b76d 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -19,16 +19,16 @@
 		serial@f995e000 {
 			status = "okay";
 		};
+	};
+};
 
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-		};
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
 
-		sdhci@f98a4900 {
-			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-			bus-width = <4>;
-		};
-	};
+&sdhc_2 {
+	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
index f2fb7c975af8..69da87577ad0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -419,7 +419,7 @@
 			status = "disabled";
 		};
 
-		mmc@f9824900 {
+		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc", "core";
@@ -432,7 +432,7 @@
 			status = "disabled";
 		};
 
-		mmc@f98a4900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc", "core";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
index c72540223fa9..29fdf29fdb8c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -577,7 +577,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
index 4cd405db5500..ecb9171e4da5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -455,7 +455,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/rk3288.dtsi
index 487b0e03d4b4..2ca76b69add7 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/rk3288.dtsi
@@ -1181,6 +1181,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/sam9x60.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/sam9x60.dtsi
index 8f5477e307dd..37a5d96aaf64 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/sam9x60.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/sam9x60.dtsi
@@ -564,7 +564,7 @@
 			mpddrc: mpddrc@ffffe800 {
 				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/spear320-hmi.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/spear320-hmi.dts
index 34503ac9c51c..721e5ee7b680 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/spear320-hmi.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/spear320-hmi.dts
@@ -241,7 +241,7 @@
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/spear600.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..9d5a04a46b14 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/spear600.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..d52a7aaa1074 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -178,7 +178,7 @@
 				tsin-num = <0>;
 				serial-not-parallel;
 				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
 				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp131.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp131.dtsi
index dd35a607073d..723787f72cfd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp131.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp131.dtsi
@@ -405,6 +405,7 @@
 
 			part_number_otp: part_number_otp@4 {
 				reg = <0x4 0x2>;
+				bits = <0 12>;
 			};
 			ts_cal1: calib@5c {
 				reg = <0x5c 0x2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
index d865ab5d866b..dd23de85100c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -101,8 +101,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
index 30156b7546ed..d540550f7da2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -391,8 +391,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 238a611192e7..d3b85a8764d7 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -428,8 +428,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 90933077d66d..b6957cbdeff5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -100,7 +100,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 134a798ad3f2..bb40fb46da81 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -247,8 +247,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 43641cb82398..343b02b97155 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 42ed4a04a12e..6280c5e86a12 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -345,7 +345,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts linux-libre-6.1.22-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..ba2001f37315 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ linux-libre-6.1.22-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -340,7 +340,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-6.1-gnu/arch/arm/configs/bcm2835_defconfig linux-libre-6.1.22-gnu/arch/arm/configs/bcm2835_defconfig
index a51babd178c2..be0c984a6694 100644
--- linux-libre-6.1-gnu/arch/arm/configs/bcm2835_defconfig
+++ linux-libre-6.1.22-gnu/arch/arm/configs/bcm2835_defconfig
@@ -107,6 +107,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
+CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/thread_info.h linux-libre-6.1.22-gnu/arch/arm/include/asm/thread_info.h
index aecc403b2880..7f092cb55a41 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/thread_info.h
+++ linux-libre-6.1.22-gnu/arch/arm/include/asm/thread_info.h
@@ -128,15 +128,16 @@ extern int vfp_restore_user_hwstate(struct user_vfp *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
-#define TIF_NOTIFY_SIGNAL	8	/* signal notifications exist */
+#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
 
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
+#define TIF_RESTORE_SIGMASK	19
+#define TIF_SYSCALL_TRACE	20	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	21	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	22	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		23	/* seccomp syscall filtering active */
+
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx25.c linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx25.c
index 3e63445cde06..cc86977d0a34 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx25.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx27.c linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx27.c
index bf70e13bbe9e..1d2893908368 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx27.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx27.c
@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx31.c linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx31.c
index b9c24b851d1a..35c544924e50 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx31.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx31.c
@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx35.c linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx35.c
index 80e7d8ab9f1b..1fe75b39c2d9 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx35.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx35.c
@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx5.c linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx5.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/mmdc.c linux-libre-6.1.22-gnu/arch/arm/mach-imx/mmdc.c
index af12668d0bf5..b9efe9da06e0 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-imx/mmdc.c
@@ -99,6 +99,7 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
@@ -433,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
 			.task_ctx_nr    = perf_invalid_context,
@@ -452,15 +451,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
 static int imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
 	iounmap(pmu_mmdc->mmdc_base);
@@ -474,7 +474,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
 	const struct of_device_id *of_id =
 		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -497,14 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
 
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
+
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -525,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
 pmu_free:
diff --git linux-libre-6.1-gnu/arch/arm/mach-mmp/time.c linux-libre-6.1.22-gnu/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..708816caf859 100644
--- linux-libre-6.1-gnu/arch/arm/mach-mmp/time.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-mmp/time.c
@@ -43,18 +43,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/Kconfig linux-libre-6.1.22-gnu/arch/arm/mach-omap1/Kconfig
index 538a960257cc..7ec7ada287e0 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/Kconfig
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/Kconfig
@@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
 	depends on ATAGS
+	select ARCH_OMAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select CLKSRC_MMIO
@@ -45,10 +46,6 @@ config ARCH_OMAP16XX
 	select CPU_ARM926T
 	select OMAP_DM_TIMER
 
-config ARCH_OMAP1_ANY
-	select ARCH_OMAP
-	def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX
-
 config ARCH_OMAP
 	bool
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/Makefile linux-libre-6.1.22-gnu/arch/arm/mach-omap1/Makefile
index 506074b86333..0615cb0ba580 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/Makefile
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/Makefile
@@ -3,8 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-ifdef CONFIG_ARCH_OMAP1_ANY
-
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
 	 serial.o devices.o dma.o omap-dma.o fb.o
@@ -59,5 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
-
-endif
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/gpio15xx.c linux-libre-6.1.22-gnu/arch/arm/mach-omap1/gpio15xx.c
index c675f11de99d..61fa26efd865 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/gpio15xx.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/gpio15xx.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-soc.h>
+#include <asm/irq.h>
 
 #include "irqs.h"
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/io.c linux-libre-6.1.22-gnu/arch/arm/mach-omap1/io.c
index d2db9b8aed3f..0074b011a05a 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/io.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/io.c
@@ -22,17 +22,14 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap_io_desc[] __initdata = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1_IO_VIRT,
 		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
 		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
-	}
-};
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
+	},
 	{
 		.virtual	= OMAP7XX_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
@@ -49,6 +46,12 @@ static struct map_desc omap7xx_io_desc[] __initdata = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	},
 	{
 		.virtual	= OMAP1510_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
@@ -65,6 +68,12 @@ static struct map_desc omap1510_io_desc[] __initdata = {
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 static struct map_desc omap16xx_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	},
 	{
 		.virtual	= OMAP16XX_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
@@ -79,18 +88,9 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 };
 #endif
 
-/*
- * Maps common IO regions for omap1
- */
-static void __init omap1_map_common_io(void)
-{
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-}
-
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
 void __init omap7xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
 }
 #endif
@@ -98,7 +98,6 @@ void __init omap7xx_map_io(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 void __init omap15xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
 }
 #endif
@@ -106,7 +105,6 @@ void __init omap15xx_map_io(void)
 #if defined(CONFIG_ARCH_OMAP16XX)
 void __init omap16xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
 }
 #endif
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/mcbsp.c linux-libre-6.1.22-gnu/arch/arm/mach-omap1/mcbsp.c
index 05c25c432449..b1632cbe37e6 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/mcbsp.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/mcbsp.c
@@ -89,7 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 struct resource omap7xx_mcbsp_res[][6] = {
 	{
 		{
@@ -159,14 +158,7 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 };
 #define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
 #define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-#else
-#define omap7xx_mcbsp_res_0		NULL
-#define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_RES_SZ		0
-#define OMAP7XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP15XX
 struct resource omap15xx_mcbsp_res[][6] = {
 	{
 		{
@@ -266,14 +258,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 };
 #define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
 #define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
-#else
-#define omap15xx_mcbsp_res_0		NULL
-#define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_RES_SZ		0
-#define OMAP15XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP16XX
 struct resource omap16xx_mcbsp_res[][6] = {
 	{
 		{
@@ -373,12 +358,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 };
 #define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
 #define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
-#else
-#define omap16xx_mcbsp_res_0		NULL
-#define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_RES_SZ		0
-#define OMAP16XX_MCBSP_COUNT		0
-#endif
 
 static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 			struct omap_mcbsp_platform_data *config, int size)
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/pm.h linux-libre-6.1.22-gnu/arch/arm/mach-omap1/pm.h
index d9165709c532..0d1f092821ff 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/pm.h
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/pm.h
@@ -106,13 +106,6 @@
 #define OMAP7XX_IDLECT3		0xfffece24
 #define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
 
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP850) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
-#warning "Power management for this processor not implemented yet"
-#endif
-
 #ifndef __ASSEMBLER__
 
 #include <linux/clk.h>
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/timer.c linux-libre-6.1.22-gnu/arch/arm/mach-omap1/timer.c
index f5cd4bbf7566..81a912c1145a 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/timer.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap1/timer.c
@@ -158,7 +158,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/omap4-common.c linux-libre-6.1.22-gnu/arch/arm/mach-omap2/omap4-common.c
index 6d1eb4eefefe..d9ed2a5dcd5e 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/omap4-common.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap2/omap4-common.c
@@ -140,6 +140,7 @@ static int __init omap4_sram_init(void)
 			__func__);
 	else
 		sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+	of_node_put(np);
 
 	return 0;
 }
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/timer.c linux-libre-6.1.22-gnu/arch/arm/mach-omap2/timer.c
index 620ba69c8f11..5677c4a08f37 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/timer.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git linux-libre-6.1-gnu/arch/arm/mach-s3c/s3c64xx.c linux-libre-6.1.22-gnu/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe..dce2b0e95308 100644
--- linux-libre-6.1-gnu/arch/arm/mach-s3c/s3c64xx.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-s3c/s3c64xx.c
@@ -173,7 +173,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
-void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
 {
 	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
diff --git linux-libre-6.1-gnu/arch/arm/mach-zynq/slcr.c linux-libre-6.1.22-gnu/arch/arm/mach-zynq/slcr.c
index 37707614885a..9765b3f4c2fc 100644
--- linux-libre-6.1-gnu/arch/arm/mach-zynq/slcr.c
+++ linux-libre-6.1.22-gnu/arch/arm/mach-zynq/slcr.c
@@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
 	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
 	if (IS_ERR(zynq_slcr_regmap)) {
 		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm/mm/nommu.c linux-libre-6.1.22-gnu/arch/arm/mm/nommu.c
index c1494a4dee25..53f2d8774fdb 100644
--- linux-libre-6.1-gnu/arch/arm/mm/nommu.c
+++ linux-libre-6.1.22-gnu/arch/arm/mm/nommu.c
@@ -161,7 +161,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	mpu_setup();
 
 	/* allocate the zero page. */
-	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 	if (!zero_page)
 		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
 		      __func__, PAGE_SIZE, PAGE_SIZE);
diff --git linux-libre-6.1-gnu/arch/arm/nwfpe/Makefile linux-libre-6.1.22-gnu/arch/arm/nwfpe/Makefile
index 303400fa2cdf..2aec85ab1e8b 100644
--- linux-libre-6.1-gnu/arch/arm/nwfpe/Makefile
+++ linux-libre-6.1.22-gnu/arch/arm/nwfpe/Makefile
@@ -11,3 +11,9 @@ nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
+
+# Try really hard to avoid generating calls to __aeabi_uldivmod() from
+# float64_rem() due to loop elision.
+ifdef CONFIG_CC_IS_CLANG
+CFLAGS_softfloat.o	+= -mllvm -replexitval=never
+endif
diff --git linux-libre-6.1-gnu/arch/arm64/Kconfig linux-libre-6.1.22-gnu/arch/arm64/Kconfig
index 505c8a1ccbe0..43ff7c7a3ac9 100644
--- linux-libre-6.1-gnu/arch/arm64/Kconfig
+++ linux-libre-6.1.22-gnu/arch/arm64/Kconfig
@@ -98,7 +98,6 @@ config ARM64
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index 5836b0030931..e1605a9b0a13 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -168,15 +168,15 @@
 		reg = <0x32 0x20>;
 	};
 
-	eth_mac: eth_mac@0 {
+	eth_mac: eth-mac@0 {
 		reg = <0x0 0x6>;
 	};
 
-	bt_mac: bt_mac@6 {
+	bt_mac: bt-mac@6 {
 		reg = <0x6 0x6>;
 	};
 
-	wifi_mac: wifi_mac@c {
+	wifi_mac: wifi-mac@c {
 		reg = <0xc 0x6>;
 	};
 
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 
 	/* RTC */
-	pcf8563: pcf8563@51 {
+	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		status = "okay";
@@ -303,7 +303,7 @@
 
 &usb {
 	status = "okay";
-	phy-supply = <&usb_pwr>;
+	vbus-supply = <&usb_pwr>;
 };
 
 &spicc1 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04f797b5a012..6cc685f91fc9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -152,7 +152,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: clock-controller {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -161,7 +161,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1885,7 +1885,7 @@
 			sd_emmc_b: sd@5000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,
 					<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -1897,7 +1897,7 @@
 			sd_emmc_c: mmc@7000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
 					<&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..131a8a5a9f5a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1694,7 +1694,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					internal_ephy: ethernet_phy@8 {
+					internal_ephy: ethernet-phy@8 {
 						compatible = "ethernet-phy-id0180.3301",
 							     "ethernet-phy-ieee802.3-c22";
 						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -2318,7 +2318,7 @@
 		sd_emmc_a: sd@ffe03000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe03000 0x0 0x800>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_A>,
 				 <&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2330,7 +2330,7 @@
 		sd_emmc_b: sd@ffe05000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe05000 0x0 0x800>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_B>,
 				 <&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2342,7 +2342,7 @@
 		sd_emmc_c: mmc@ffe07000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe07000 0x0 0x800>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_C>,
 				 <&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index e3bb6df42ff3..cf0a9be83fc4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -401,5 +401,4 @@
 
 &usb {
 	status = "okay";
-	dr_mode = "host";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..6eaceb717d61 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -57,26 +57,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index bcdf55f48a83..4e84ab87cc7d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -17,7 +17,7 @@
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		update-button {
+		button-update {
 			label = "update";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <1300000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 023a52005494..80d86780cb6b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -232,7 +232,7 @@
 			reg = <0x14 0x10>;
 		};
 
-		eth_mac: eth_mac@34 {
+		eth_mac: eth-mac@34 {
 			reg = <0x34 0x10>;
 		};
 
@@ -249,7 +249,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi_clocks@0 {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -531,7 +531,7 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 
-			hwrng: rng {
+			hwrng: rng@0 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x0 0x0 0x4>;
 			};
@@ -602,21 +602,21 @@
 			sd_emmc_a: mmc@70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc@72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc@74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6d8cc00fedc7..5f2d4317ecfb 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -16,7 +16,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9ef210f17b4a..393d3cb33b9e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -18,7 +18,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led {
 			label = "n1:white:status";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
index b331a013572f..c490dbbf063b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -79,6 +79,5 @@
 		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-		clock-names = "lpo";
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6831137c5c10..a18d6d241a5a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -86,11 +86,11 @@
 };
 
 &efuse {
-	bt_mac: bt_mac@6 {
+	bt_mac: bt-mac@6 {
 		reg = <0x6 0x6>;
 	};
 
-	wifi_mac: wifi_mac@C {
+	wifi_mac: wifi-mac@c {
 		reg = <0xc 0x6>;
 	};
 };
@@ -239,7 +239,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c_b_pins>;
 
-	pcf8563: pcf8563@51 {
+	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c3ac531c4f84..350022935052 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -759,7 +759,7 @@
 		};
 	};
 
-	eth-phy-mux {
+	eth-phy-mux@55c {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index cadba194b149..38ebe98ba9c6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -17,13 +17,13 @@
 	compatible = "bananapi,bpi-m5", "amlogic,sm1";
 	model = "Banana Pi BPI-M5";
 
-	adc_keys {
+	adc-keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 2>;
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		key {
+		button-sw3 {
 			label = "SW3";
 			linux,code = <BTN_3>;
 			press-threshold-microvolt = <1700000>;
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index e3486f60645a..3d642d739c35 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -76,9 +76,17 @@
 };
 
 &cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
 	cooling-maps {
 		map {
-			trip = <&cpu_passive>;
+			trip = <&cpu_active>;
 			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
index 51a63b29d404..a4d195e9eb8c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -412,7 +412,7 @@
 			resets = <&ps_ans2>;
 		};
 
-		pcie0_dart_0: dart@681008000 {
+		pcie0_dart_0: iommu@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -421,7 +421,7 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_1: dart@682008000 {
+		pcie0_dart_1: iommu@682008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x82008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -430,7 +430,7 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_2: dart@683008000 {
+		pcie0_dart_2: iommu@683008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x83008000 0x0 0x4000>;
 			#iommu-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 5a8d85a7d161..bbdf989058ff 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9b726c2a4842..dda27ed7aaf2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -89,7 +89,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index b2fcbba60d3a..3b0ed9305f2b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -88,7 +88,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..d4867d6cf47c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index f598669e742f..52c5a43b30a0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -103,7 +103,7 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3d9647b3da14..537cecb13dd0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index ca2a43e0cbf6..3af4c7636974 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -99,8 +99,6 @@
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -113,6 +111,10 @@
 			reg = <0>;
 			eee-broken-1000t;
 			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index 5ddbda0b4def..f2c4d13b2f3c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -157,7 +157,7 @@
 
 		sc_pwrkey: keys {
 			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycode = <KEY_POWER>;
+			linux,keycodes = <KEY_POWER>;
 			wakeup-source;
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 03266bd90a06..169f047fbca5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -120,7 +120,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -316,7 +316,7 @@
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..0e8f0d7161ad 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index 83c8f715cd90..b1f11098d248 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -602,7 +602,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
index 3ea73a6886ff..f6ad1a4b8b66 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
@@ -33,7 +33,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
index 2fa635e1c1a8..1f8ea20dfafc 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
@@ -33,7 +33,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 244ef8d6cc68..7761d5671cb1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -222,7 +222,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
 	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index d3ee6fc4baab..5a770c8b777e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -721,7 +721,6 @@
 	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -737,7 +736,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -746,7 +744,6 @@
 	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
 	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -759,6 +756,7 @@
 &usbotg2 {
 	dr_mode = "host";
 	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 31f4c735fe4f..ba0b3f507855 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -651,7 +651,6 @@
 	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
 	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -668,7 +667,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -686,7 +684,6 @@
 	dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 19f6d2943d26..8e861b920d09 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -572,7 +572,6 @@
 	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index c2a5c2f7b204..7c3f5c54f040 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -9,6 +9,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
index 73cc3fafa018..b2bcd2282170 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -11,6 +11,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index bcab830c6e95..59445f916d7f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -98,6 +98,7 @@
 		off-on-delay = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 83f9a1329b1b..d98910e95137 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -562,7 +562,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mm_uid: unique-id@410 {
+				imx8mm_uid: unique-id@4 {
 					reg = <0x4 0x8>;
 				};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index dd4302ac1de4..e7362d7615bd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -631,7 +631,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 015ab5078b65..a81fbe52e3c3 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -295,6 +295,7 @@
 				sai2: sai@30020000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -309,6 +310,7 @@
 				sai3: sai@30030000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -323,6 +325,7 @@
 				sai5: sai@30050000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -339,6 +342,7 @@
 				sai6: sai@30060000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -396,6 +400,7 @@
 				sai7: sai@300b0000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -563,7 +568,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mn_uid: unique-id@410 {
+				imx8mn_uid: unique-id@4 {
 					reg = <0x4 0x8>;
 				};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index b4c1ef2559f2..126c839b45f2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -36,8 +36,8 @@
 
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
 	};
 
 	reg_can1_stby: regulator-can1-stby {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index 79b290a002c1..ecc4bce6db97 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -99,7 +99,6 @@
 
 		regulators {
 			buck1: BUCK1 {
-				regulator-compatible = "BUCK1";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -108,7 +107,6 @@
 			};
 
 			buck2: BUCK2 {
-				regulator-compatible = "BUCK2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -119,7 +117,6 @@
 			};
 
 			buck4: BUCK4 {
-				regulator-compatible = "BUCK4";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -127,7 +124,6 @@
 			};
 
 			buck5: BUCK5 {
-				regulator-compatible = "BUCK5";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -135,7 +131,6 @@
 			};
 
 			buck6: BUCK6 {
-				regulator-compatible = "BUCK6";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -143,7 +138,6 @@
 			};
 
 			ldo1: LDO1 {
-				regulator-compatible = "LDO1";
 				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -151,7 +145,6 @@
 			};
 
 			ldo2: LDO2 {
-				regulator-compatible = "LDO2";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
@@ -159,7 +152,6 @@
 			};
 
 			ldo3: LDO3 {
-				regulator-compatible = "LDO3";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -167,13 +159,11 @@
 			};
 
 			ldo4: LDO4 {
-				regulator-compatible = "LDO4";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5: LDO5 {
-				regulator-compatible = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 06b4c93c5876..d68ef4f0726f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -611,7 +611,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index a2f7969bec9d..2f5a8c0af4ff 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -424,7 +424,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mp_uid: unique-id@420 {
+				imx8mp_uid: unique-id@8 {
 					reg = <0x8 0x8>;
 				};
 
@@ -523,6 +523,7 @@
 				compatible = "fsl,imx8mp-gpc";
 				reg = <0x303a0000 0x1000>;
 				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
 
@@ -589,7 +590,7 @@
 						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_hsiomix: power-domains@17 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
 						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -1279,7 +1280,7 @@
 			reg = <0x32f10100 0x8>,
 			      <0x381f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1292,9 +1293,9 @@
 			usb_dwc3_0: usb@38100000 {
 				compatible = "snps,dwc3";
 				reg = <0x38100000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
@@ -1321,7 +1322,7 @@
 			reg = <0x32f10108 0x8>,
 			      <0x382f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1334,9 +1335,9 @@
 			usb_dwc3_1: usb@38200000 {
 				compatible = "snps,dwc3";
 				reg = <0x38200000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 9dda2a1554c3..8614c18b5998 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..6e6182709d22 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -339,7 +339,7 @@
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 674187e7252f..39a109b5a87c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -592,7 +592,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mq_uid: soc-uid@410 {
+				imx8mq_uid: soc-uid@4 {
 					reg = <0x4 0x8>;
 				};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 07d8dd8160f6..afa883389456 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 69786c326db0..27f9a9f33134 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -74,7 +74,7 @@
 
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17fe
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
 			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
 			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
 			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
@@ -84,7 +84,7 @@
 			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
 			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
 			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
-			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
 
@@ -102,7 +102,7 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
 			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
 			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
 			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index 0247866fc86b..8ab9f8194702 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -150,6 +150,8 @@
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -160,6 +162,8 @@
 			lpi2c2: i2c@44350000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -277,6 +281,8 @@
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -287,6 +293,8 @@
 			lpi2c4: i2c@42540000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -351,6 +359,8 @@
 			lpi2c5: i2c@426b0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -361,6 +371,8 @@
 			lpi2c6: i2c@426c0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -371,6 +383,8 @@
 			lpi2c7: i2c@426d0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -381,6 +395,8 @@
 			lpi2c8: i2c@426e0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 44ed6f963b75..8e2ac687a410 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -97,7 +97,7 @@
 
 			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0x11000 0x100>;
+				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index ada164d423f3..200f97e1c4c9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -125,9 +125,12 @@
 	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 0>; /* GPIO2_5 */
 	};
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 9b1af9c80130..d31a194124c9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -50,7 +50,7 @@
 		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index e6d7453e56e0..1ac0b2cf3d40 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -266,7 +266,7 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..dde9ce137b4f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -117,7 +117,7 @@
 		compatible = "simple-bus";
 		ranges;
 
-		gic: interrupt-controller@0c000000 {
+		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
 			interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@0c53a650 {
+		sysirq: intpol-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..c3677d77e0a4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 146e18b5b1f4..7bb316922a3a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -435,6 +435,7 @@
 	pwm: pwm@11006000 {
 		compatible = "mediatek,mt7622-pwm";
 		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_PWM_SEL>,
 			 <&pericfg CLK_PERI_PWM_PD>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 72e0d9722e07..fc338bd497f5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -14,7 +14,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator@0 {
+	clk40m: oscillator-40m {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
 		#clock-cells = <0>;
@@ -112,6 +112,12 @@
 			#clock-cells = <1>;
 		};
 
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
 		topckgen: topckgen@1001b000 {
 			compatible = "mediatek,mt7986-topckgen", "syscon";
 			reg = <0 0x1001B000 0 0x1000>;
@@ -119,8 +125,7 @@
 		};
 
 		watchdog: watchdog@1001c000 {
-			compatible = "mediatek,mt7986-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt7986-wdt";
 			reg = <0 0x1001c000 0 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#reset-cells = <1>;
@@ -168,7 +173,7 @@
 			#clock-cells = <1>;
 		};
 
-		trng: trng@1020f000 {
+		trng: rng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
@@ -228,12 +233,6 @@
 			 #reset-cells = <1>;
 		};
 
-		wed_pcie: wed-pcie@10003000 {
-			compatible = "mediatek,mt7986-wed-pcie",
-				     "syscon";
-			reg = <0 0x10003000 0 0x10>;
-		};
-
 		wed0: wed@15010000 {
 			compatible = "mediatek,mt7986-wed",
 				     "syscon";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index a70b669c49ba..268a1f28af8c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -585,6 +585,15 @@
 		method = "smc";
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -968,8 +977,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_CLK13M>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		iommu: iommu@10205000 {
@@ -1678,7 +1686,7 @@
 				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-names = "job", "mmu", "gpu";
 
-			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
 
 			power-domains =
 				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 64693c17af9e..f88d660e4154 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -47,14 +47,12 @@
 				core5 {
 					cpu = <&cpu5>;
 				};
-			};
 
-			cluster1 {
-				core0 {
+				core6 {
 					cpu = <&cpu6>;
 				};
 
-				core1 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -211,10 +209,12 @@
 		};
 	};
 
-	clk13m: oscillator-13m {
-		compatible = "fixed-clock";
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
-		clock-frequency = <13000000>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
 		clock-output-names = "clk13m";
 	};
 
@@ -330,8 +330,7 @@
 		};
 
 		watchdog: watchdog@10007000 {
-			compatible = "mediatek,mt8186-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt8186-wdt";
 			mediatek,disable-extrst;
 			reg = <0 0x10007000 0 0x1000>;
 			#reset-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 6b20376191a7..ef1294d96014 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -29,6 +29,15 @@
 		rdma4 = &rdma4;
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -149,19 +158,16 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
-
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -531,8 +537,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		pwrap: pwrap@10026000 {
@@ -575,6 +580,8 @@
 			compatible = "mediatek,mt8192-scp_adsp";
 			reg = <0 0x10720000 0 0x1000>;
 			#clock-cells = <1>;
+			/* power domain dependency not upstreamed */
+			status = "fail";
 		};
 
 		uart0: serial@11002000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 4fbd99eb496a..dec85d254838 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -56,10 +56,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@54600000 {
 			no-map;
-			reg = <0 0x54600000 0x0 0x30000>;
+			reg = <0 0x54600000 0x0 0x200000>;
 		};
 
 		/* 12 MiB reserved for OP-TEE (BL32)
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 905d1a90b406..2c2b946b614b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -36,7 +36,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -49,7 +49,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -62,7 +62,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -75,7 +75,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -150,22 +150,20 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
 
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
 
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
 
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
 
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -244,6 +242,15 @@
 		status = "disabled";
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -683,8 +690,7 @@
 		};
 
 		watchdog: watchdog@10007000 {
-			compatible = "mediatek,mt8195-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt8195-wdt";
 			mediatek,disable-extrst;
 			reg = <0 0x10007000 0 0x100>;
 			#reset-cells = <1>;
@@ -701,7 +707,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&topckgen CLK_TOP_CLK26M_D2>;
+			clocks = <&clk13m>;
 		};
 
 		pwrap: pwrap@10024000 {
@@ -1410,6 +1416,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0 0x11e30000 0xe00>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
 			status = "disabled";
 
 			u2port1: usb-phy@0 {
@@ -1966,7 +1973,7 @@
 		};
 
 		vdosys0: syscon@1c01a000 {
-			compatible = "mediatek,mt8195-mmsys", "syscon";
+			compatible = "mediatek,mt8195-vdosys0", "mediatek,mt8195-mmsys", "syscon";
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
@@ -2101,7 +2108,7 @@
 		};
 
 		vdosys1: syscon@1c100000 {
-			compatible = "mediatek,mt8195-mmsys", "syscon";
+			compatible = "mediatek,mt8195-vdosys1", "syscon";
 			reg = <0 0x1c100000 0 0x1000>;
 			#clock-cells = <1>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 8ee1529683a3..ec8dfb3d1c6d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@
 	};
 
 	firmware {
-		optee: optee@4fd00000 {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
@@ -209,7 +209,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0@0 {
+	i2c0_pins_a: i2c0 {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2@0 {
+	i2c2_pins_a: i2c2 {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a44c56c1e56e..634373a423ef 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1666,7 +1666,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_cam_1v2: regulator-vdd-cam-1v8 {
+	vdd_cam_1v2: regulator-vdd-cam-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cam-1v2";
 		regulator-min-microvolt = <1200000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 0170bfa8a467..dfe2cf2f4b21 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -1965,7 +1965,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */
 			 <0x02000000 0x0  0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2178,7 +2178,7 @@
 		bus-range = <0x0 0xff>;
 
 		ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
-			 <0x02000000 0x0  0x40000000 0x21 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+			 <0x02000000 0x0  0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
 		interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>,
@@ -2336,7 +2336,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */
 			 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2442,7 +2442,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x2e 0x40000000 0x2e 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */
 			 <0x02000000 0x0  0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 1ba2eca33c7b..6a716c83e5f1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -37,6 +37,8 @@
 
 &blsp1_spi1 {
 	cs-select = <0>;
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	flash@0 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a721cdd80489..05b97b05d446 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -137,7 +137,7 @@
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB1_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb1_pipe_clk_src";
+				clock-output-names = "usb3phy_1_cc_pipe_clk";
 			};
 		};
 
@@ -180,7 +180,7 @@
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
+				clock-output-names = "usb3phy_0_cc_pipe_clk";
 			};
 		};
 
@@ -197,9 +197,9 @@
 			status = "disabled";
 		};
 
-		pcie_qmp0: phy@86000 {
-			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x00086000 0x1c4>;
+		pcie_qmp0: phy@84000 {
+			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+			reg = <0x00084000 0x1bc>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -213,15 +213,16 @@
 				      "common";
 			status = "disabled";
 
-			pcie_phy0: phy@86200 {
-				reg = <0x86200 0x16c>,
-				      <0x86400 0x200>,
-				      <0x86800 0x4f4>;
+			pcie_phy0: phy@84200 {
+				reg = <0x84200 0x16c>,
+				      <0x84400 0x200>,
+				      <0x84800 0x1f0>,
+				      <0x84c00 0xf4>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "pcie_0_pipe_clk";
+				clock-output-names = "pcie20_phy0_pipe_clk";
 			};
 		};
 
@@ -242,14 +243,14 @@
 			status = "disabled";
 
 			pcie_phy1: phy@8e200 {
-				reg = <0x8e200 0x16c>,
+				reg = <0x8e200 0x130>,
 				      <0x8e400 0x200>,
-				      <0x8e800 0x4f4>;
+				      <0x8e800 0x1f8>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "pcie_1_pipe_clk";
+				clock-output-names = "pcie20_phy1_pipe_clk";
 			};
 		};
 
@@ -750,9 +751,9 @@
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0 0x10200000 0x10200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x10300000 0x10300000
-				  0 0xd00000>; /* non-prefetchable memory */
+				  0 0x10000>,   /* downstream I/O */
+				 <0x82000000 0 0x10220000 0x10220000
+				  0 0xfde0000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -795,16 +796,18 @@
 		};
 
 		pcie0: pci@20000000 {
-			compatible = "qcom,pcie-ipq8074";
+			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
-			      <0x00080000 0x2000>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x4000>,
 			      <0x20100000 0x1000>;
-			reg-names = "dbi", "elbi", "parf", "config";
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
+			max-link-speed = <3>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 
@@ -812,9 +815,9 @@
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0 0x20200000 0x20200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x20300000 0x20300000
-				  0 0xd00000>; /* non-prefetchable memory */
+				  0 0x10000>, /* downstream I/O */
+				 <0x82000000 0 0x20220000 0x20220000
+				  0 0xfde0000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -832,28 +835,30 @@
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
-				 <&gcc GCC_PCIE0_AHB_CLK>,
-				 <&gcc GCC_PCIE0_AUX_CLK>;
-
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>;
 			clock-names = "iface",
 				      "axi_m",
 				      "axi_s",
-				      "ahb",
-				      "aux";
+				      "axi_bridge",
+				      "rchng";
+
 			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
 				 <&gcc GCC_PCIE0_SLEEP_ARES>,
 				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
 				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
 				 <&gcc GCC_PCIE0_AHB_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
 			reset-names = "pipe",
 				      "sleep",
 				      "sticky",
 				      "axi_m",
 				      "axi_s",
 				      "ahb",
-				      "axi_m_sticky";
+				      "axi_m_sticky",
+				      "axi_s_sticky";
 			status = "disabled";
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index a831064700ee..9743cb270639 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1345,7 +1345,7 @@
 		};
 
 		mpss: remoteproc@4080000 {
-			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c1..85a87d058f8a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -455,7 +455,7 @@
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 155>;
+			gpio-ranges = <&tlmm 0 0 142>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
index 7e6bce4af441..4159fc35571a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
index e6a5ebd30e2f..ad9702dd171b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 71e373b11de9..465b2828acbd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -1,7 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
  */
 
 /dts-v1/;
@@ -13,6 +15,9 @@
 /* cont_splash_mem has different memory mapping */
 /delete-node/ &cont_splash_mem;
 
+/* disabled on downstream, conflicts with cont_splash_mem */
+/delete-node/ &dfps_data_mem;
+
 / {
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
@@ -47,7 +52,17 @@
 		};
 
 		cont_splash_mem: memory@3400000 {
-			reg = <0 0x03400000 0 0x1200000>;
+			reg = <0 0x03400000 0 0xc00000>;
+			no-map;
+		};
+
+		reserved@5000000 {
+			reg = <0x0 0x05000000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		reserved@6c00000 {
+			reg = <0x0 0x06c00000 0x0 0x400000>;
 			no-map;
 		};
 	};
@@ -79,8 +94,8 @@
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 
 		pm8994_s1: s1 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
 		};
 
 		pm8994_s2: s2 {
@@ -236,9 +251,8 @@
 		};
 
 		pm8994_l26: l26 {
-			/* TODO: value from downstream
 			regulator-min-microvolt = <987500>;
-			fails to apply */
+			regulator-max-microvolt = <987500>;
 		};
 
 		pm8994_l27: l27 {
@@ -252,19 +266,13 @@
 		};
 
 		pm8994_l29: l29 {
-			/* TODO: Unsupported voltage range.
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			qcom,init-voltage = <2800000>;
-			*/
 		};
 
 		pm8994_l30: l30 {
-			/* TODO: get this verified
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
 		};
 
 		pm8994_l31: l31 {
@@ -273,11 +281,8 @@
 		};
 
 		pm8994_l32: l32 {
-			/* TODO: get this verified
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
 		};
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index c4e87d0aec42..3ab0ad14e870 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -11,6 +11,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+
 / {
 	model = "Xiaomi Mi 4C";
 	compatible = "xiaomi,libra", "qcom,msm8992";
@@ -70,25 +76,67 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* This is for getting crash logs using Android downstream kernels */
-		ramoops@dfc00000 {
-			compatible = "ramoops";
-			reg = <0x0 0xdfc00000 0x0 0x40000>;
-			console-size = <0x10000>;
-			record-size = <0x10000>;
-			ftrace-size = <0x10000>;
-			pmsg-size = <0x20000>;
+		memory_hole: hole@6400000 {
+			reg = <0 0x06400000 0 0x600000>;
+			no-map;
+		};
+
+		memory_hole2: hole2@6c00000 {
+			reg = <0 0x06c00000 0 0x2400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@9000000 {
+			reg = <0 0x09000000 0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: tzapp@ea00000 {
+			reg = <0 0x0ea00000 0 0x1900000>;
+			no-map;
+		};
+
+		mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+			reg = <0 0xca0b0000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@ca100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xca100000 0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
 		};
 
-		modem_region: modem_region@9000000 {
-			reg = <0x0 0x9000000 0x0 0x5a00000>;
+		audio_mem: audio@cb400000 {
+			reg = <0 0xcb000000 0 0x400000>;
+			no-mem;
+		};
+
+		qseecom_mem: qseecom@cb400000 {
+			reg = <0 0xcb400000 0 0x1c00000>;
+			no-mem;
+		};
+
+		adsp_rfsa_mem: adsp-rfsa@cd000000 {
+			reg = <0 0xcd000000 0 0x10000>;
 			no-map;
 		};
 
-		tzapp: modem_region@ea00000 {
-			reg = <0x0 0xea00000 0x0 0x1900000>;
+		sensor_rfsa_mem: sensor-rfsa@cd010000 {
+			reg = <0 0xcd010000 0 0x10000>;
 			no-map;
 		};
+
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0 0xdfc00000 0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
 	};
 };
 
@@ -130,11 +178,6 @@
 	status = "okay";
 };
 
-&peripheral_region {
-	reg = <0x0 0x7400000 0x0 0x1c00000>;
-	no-map;
-};
-
 &pm8994_spmi_regulators {
 	VDD_APC0: s8 {
 		regulator-min-microvolt = <680000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 750643763a76..02fc3795dbfd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
  */
 
 #include "msm8994.dtsi"
@@ -36,10 +37,6 @@
 	compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
 };
 
-&tcsr_mutex {
-	compatible = "qcom,sfpb-mutex";
-};
-
 &timer {
 	interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index dbfbb77e9ff5..7e2c0dcc11ab 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -8,9 +8,6 @@
 
 #include "msm8994.dtsi"
 
-/* Angler's firmware does not report where the memory is allocated */
-/delete-node/ &cont_splash_mem;
-
 / {
 	model = "Huawei Nexus 6P";
 	compatible = "huawei,angler", "qcom,msm8994";
@@ -27,6 +24,22 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tzapp_mem: tzapp@4800000 {
+			reg = <0 0x04800000 0 0x1900000>;
+			no-map;
+		};
+
+		removed_region: reserved@6300000 {
+			reg = <0 0x06300000 0 0xD00000>;
+			no-map;
+		};
+	};
 };
 
 &blsp1_uart2 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index ca7c8d2e1d3d..a60decd89429 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -944,10 +944,6 @@
 	};
 };
 
-/*
- * For reasons that are currently unknown (but probably related to fusb301), USB takes about
- * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
- */
 &usb3 {
 	status = "okay";
 	qcom,select-utmi-as-pipe-clk;
@@ -956,6 +952,7 @@
 &usb3_dwc3 {
 	extcon = <&usb3_id>;
 	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
 	phys = <&hsusb_phy1>;
 	phy-names = "usb2-phy";
 	snps,hird-threshold = /bits/ 8 <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index aba717644391..c103034372fd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -144,82 +144,92 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -232,127 +242,137 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0x6>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -692,7 +712,7 @@
 			#power-domain-cells = <1>;
 			reg = <0x00300000 0x90000>;
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_LN_BB_CLK>,
 				 <&sleep_clk>,
 				 <&pciephy_0>,
@@ -809,9 +829,11 @@
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
+			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
 			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
 		mnoc: interconnect@5a4000 {
@@ -1030,7 +1052,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1098,7 +1120,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1213,17 +1235,17 @@
 				compatible = "operating-points-v2";
 
 				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
 				 */
 				opp-624000000 {
 					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x09>;
 				};
 				opp-560000000 {
 					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x0d>;
 				};
 				opp-510000000 {
 					opp-hz = /bits/ 64 <510000000>;
@@ -2912,8 +2934,8 @@
 			compatible = "qcom,msm8996-apcc";
 			reg = <0x06400000 0x90000>;
 
-			clock-names = "xo";
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+			clock-names = "xo", "sys_apcs_aux";
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
 
 			#clock-cells = <1>;
 		};
@@ -3032,7 +3054,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3056,7 +3078,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC2_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3342,7 +3364,7 @@
 					interrupt-names = "intr1", "intr2";
 					interrupt-controller;
 					#interrupt-cells = <1>;
-					reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
 
 					slim-ifc-dev = <&tasha_ifd>;
 
@@ -3363,7 +3385,7 @@
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_mem>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 000000000000..63e1b4ec7a36
--- /dev/null
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi
index ecf9b9919182..68245d78d2b9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
index e1622b16c08b..02a69ac0149b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -163,7 +163,7 @@
 				qcom,pre-scaling = <1 3>;
 			};
 
-			vcoin: vcoin@83 {
+			vcoin: vcoin@85 {
 				reg = <ADC5_VCOIN>;
 				qcom,decimation = <1024>;
 				qcom,pre-scaling = <1 3>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index a7ec9d11946d..f0d256d99e62 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -16,8 +16,9 @@
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 80f2d05595fa..bec1b6e5a67a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -792,7 +792,7 @@
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
-				 <&gcc 21>;
+				 <&gcc GCC_PCIE_0_PIPE_ARES>;
 			reset-names = "phy", "pipe";
 
 			clock-output-names = "pcie_0_pipe_clk";
@@ -1322,12 +1322,12 @@
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
 			clock-names = "iface", "aux", "master_bus", "slave_bus";
 
-			resets = <&gcc 18>,
-				 <&gcc 17>,
-				 <&gcc 15>,
-				 <&gcc 19>,
+			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE_0_BCR>,
-				 <&gcc 16>;
+				 <&gcc GCC_PCIE_0_AHB_ARES>;
 			reset-names = "axi_m",
 				      "axi_s",
 				      "axi_m_sticky",
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 1bd6c7dcd9e9..bfab67f4a7c9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -194,6 +194,12 @@ ap_ts_pen_1v8: &i2c4 {
 		pins = "gpio49", "gpio50", "gpio51", "gpio52";
 		function = "mi2s_1";
 	};
+
+	pinconf {
+		pins = "gpio49", "gpio50", "gpio51", "gpio52";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
 };
 
 &ts_reset_l {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 58976a1ba06b..b16886f71517 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3238,8 +3238,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 			cell-index = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 7559164cdda0..e2e37a0292ad 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -10,7 +10,6 @@
 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include "sc7280-idp.dtsi"
 #include "pmr735a.dtsi"
-#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index cd432a2856a7..ca50f0ba9b81 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -13,6 +13,7 @@
 #include "pmk8350.dtsi"
 
 #include "sc7280-chrome-common.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	aliases {
@@ -34,7 +35,7 @@
 		pinctrl-0 = <&wcd_reset_n>;
 		pinctrl-1 = <&wcd_reset_n_sleep>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 
 		qcom,rx-device = <&wcd_rx>;
 		qcom,tx-device = <&wcd_tx>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4b8c676b0bb1..f7665b379923 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -37,7 +37,7 @@
 		pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
 		pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 		us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		qcom,rx-device = <&wcd_rx>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 4cdc88d33944..346da6af51ac 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2077,6 +2077,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
+			dma-coherent;
+
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
@@ -4242,8 +4244,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 212d63d5cbf2..ba684d980cf2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -855,12 +855,13 @@
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_UFS_PHY_AHB_CLK>,
 				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
@@ -891,7 +892,7 @@
 			ranges;
 			clock-names = "ref",
 				      "ref_aux";
-			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
+			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
 			resets = <&ufs_mem_hc 0>;
@@ -923,12 +924,13 @@
 			power-domains = <&gcc UFS_CARD_GDSC>;
 
 			iommus = <&apps_smmu 0x4a0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_UFS_CARD_AHB_CLK>,
 				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
@@ -959,7 +961,7 @@
 			ranges;
 			clock-names = "ref",
 				      "ref_aux";
-			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
+			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
 
 			resets = <&ufs_card_hc 0>;
@@ -1171,7 +1173,7 @@
 			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+				 <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -1285,6 +1287,7 @@
 					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -1339,6 +1342,7 @@
 					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -1468,8 +1472,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index b51b85f583e5..e119060ac56c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -779,7 +779,7 @@
 					pins = "gpio17", "gpio18", "gpio19";
 					function = "gpio";
 					drive-strength = <2>;
-					bias-no-pull;
+					bias-disable;
 				};
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index b5eb8f7eca1d..b5f11fbcc300 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1436,7 +1436,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-low;
 		};
@@ -1446,7 +1446,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-high;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 359e2b21346c..64f50431ba5a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -969,7 +969,7 @@
 	};
 
 	wcd_intr_default: wcd_intr_default {
-		pins = <54>;
+		pins = "gpio54";
 		function = "gpio";
 
 		input-enable;
@@ -1123,7 +1123,10 @@
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi2_default {
-	drive-strength = <16>;
+	pinconf {
+		pins = "gpio27", "gpio28", "gpio29", "gpio30";
+		drive-strength = <16>;
+	};
 };
 
 &qup_uart3_default{
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index edbae6d0eedb..b77f8129de34 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -628,7 +628,7 @@
 	};
 
 	wcd_intr_default: wcd-intr-default {
-		pins = "goui54";
+		pins = "gpio54";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 71fbf33fc815..37ede5b9202b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -487,8 +487,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 118196216564..feeeeb5862aa 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -415,8 +415,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 6a8b88cc4385..e1ab5b518994 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -40,17 +40,18 @@
 	};
 
 	gpio-keys {
-		status = "okay";
 		compatible = "gpio-keys";
-		autorepeat;
 
-		key-vol-dn {
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
-			gpio-key,wakeup;
 			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
 		};
 	};
 
@@ -108,6 +109,14 @@
 
 &tlmm {
 	gpio-reserved-ranges = <22 2>, <28 6>;
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
 };
 
 &usb3 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 1fe3fa3ad877..271247b37175 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -442,9 +442,9 @@
 			reg = <0x01613000 0x180>;
 			#phy-cells = <0>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&gcc GCC_AHB2PHY_USB_CLK>;
-			clock-names = "ref", "cfg_ahb";
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
 
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 			status = "disabled";
@@ -458,7 +458,7 @@
 		sdhc_1: mmc@4744000 {
 			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
-			reg-names = "hc", "core";
+			reg-names = "hc", "cqhci";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index c39de7d3ace0..35f621ef9da5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -342,13 +342,12 @@
 		};
 
 		ramoops: ramoops@ffc00000 {
-			compatible = "removed-dma-pool", "ramoops";
-			reg = <0 0xffc00000 0 0x00100000>;
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
-			ftrace-size = <0x0>;
 			msg-size = <0x20000 0x20000>;
-			cc-size = <0x0>;
+			ecc-size = <16>;
 			no-map;
 		};
 
@@ -485,6 +484,7 @@
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x60 0x0>;
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
@@ -1063,6 +1063,7 @@
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x560 0x0>;
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
@@ -1148,15 +1149,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a140c9f..04c71f74ab72 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -33,9 +33,10 @@
 		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x9c000000 0 0x2300000>;
-			width = <1644>;
-			height = <3840>;
-			stride = <(1644 * 4)>;
+			/* Griffin BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
 			format = "a8r8g8b8";
 			/*
 			 * That's (going to be) a lot of clocks, but it's necessary due
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index cef8c4f4f0ff..47e09d96f609 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1810,7 +1810,7 @@
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommus = <&apps_smmu 0x1d80 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1909,7 +1909,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommus = <&apps_smmu 0x1e00 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -2032,11 +2032,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 9865cd0fb7d7..a51d8f7d1487 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -635,7 +635,7 @@
 	wcd938x: codec {
 		compatible = "qcom,wcd9380-codec";
 		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 		vdd-buck-supply = <&vreg_s4a_1p8>;
 		vdd-rxtx-supply = <&vreg_s4a_1p8>;
 		vdd-io-supply = <&vreg_s4a_1p8>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 5428aab3058d..e4769dcfaad7 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -619,7 +619,7 @@
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
-		bias-disabled;
+		bias-disable;
 		input-enable;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e276eed1f8e2..29e352a57731 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2180,11 +2180,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2455,7 +2455,7 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <2>;
-					pull-down;
+					bias-pull-down;
 					input-enable;
 				};
 			};
@@ -2892,15 +2892,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a86d9ea93b9d..ca7c428a741d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1043,8 +1043,6 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8350_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -2142,11 +2140,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index c1542e5cd06e..dd9a75e4fc11 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -556,8 +556,6 @@
 	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
 	vmmc-supply = <&pm8350c_l9>;
 	vqmmc-supply = <&pm8350c_l6>;
-	/* Forbid SDR104/SDR50 - broken hw! */
-	sdhci-caps-mask = <0x3 0x0>;
 	no-sdio;
 	no-mmc;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d32f08df743d..4714d7bf03b9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -991,8 +991,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -1387,8 +1385,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
@@ -3108,6 +3104,7 @@
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -3161,11 +3158,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -3192,6 +3189,9 @@
 			bus-width = <4>;
 			dma-coherent;
 
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0x0>;
+
 			status = "disabled";
 
 			sdhc2_opp_table: opp-table {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 8166e3c1ff4e..cafde91b4721 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -437,20 +437,6 @@
 		};
 	};
 
-	/* 0 - lcd_reset */
-	/* 1 - lcd_pwr */
-	/* 2 - lcd_select */
-	/* 3 - backlight-enable */
-	/* 4 - Touch_shdwn */
-	/* 5 - LCD_H_pol */
-	/* 6 - lcd_V_pol */
-	gpio_exp1: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	touchscreen@26 {
 		compatible = "ilitek,ili2117";
 		reg = <0x26>;
@@ -482,6 +468,16 @@
 			};
 		};
 	};
+
+	gpio_exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+				  "backlight-enable", "Touch_shdwn",
+				  "LCD_H_pol", "lcd_V_pol";
+	};
 };
 
 &lvds0 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index c2f152bcf10e..4092c0016035 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -577,7 +577,7 @@
 			reg = <0 0xe6540000 0 0x60>;
 			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
@@ -594,7 +594,7 @@
 			reg = <0 0xe6550000 0 0x60>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 515>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
@@ -611,7 +611,7 @@
 			reg = <0 0xe6560000 0 0x60>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
@@ -628,7 +628,7 @@
 			reg = <0 0xe66a0000 0 0x60>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 517>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
@@ -657,7 +657,7 @@
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
@@ -674,7 +674,7 @@
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
@@ -691,7 +691,7 @@
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 704>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
@@ -708,7 +708,7 @@
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index d70f0600ae5a..d58b18802cb0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -326,7 +326,7 @@
 			reg = <0 0xe6540000 0 96>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index fb1a97202c38..ebaa8cdd747d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -48,7 +48,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@82000000 {
+		gic: interrupt-controller@82010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
@@ -126,7 +126,7 @@
 		i2c0: i2c@a4030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030000 0 0x80>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
@@ -140,7 +140,7 @@
 		i2c2: i2c@a4030100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030100 0 0x80>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index aa22a0c22265..5d5d9574088c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -96,7 +96,6 @@
 			linux,default-trigger = "heartbeat";
 			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
 			default-state = "on";
-			mode = <0x23>;
 		};
 
 		user_led: led-1 {
@@ -104,7 +103,6 @@
 			linux,default-trigger = "mmc1";
 			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
-			mode = <0x05>;
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index 6e29e74f6fc6..783120e9cebe 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -111,7 +111,7 @@
 		};
 	};
 
-	dmc_opp_table: dmc_opp_table {
+	dmc_opp_table: opp-table-3 {
 		compatible = "operating-points-v2";
 
 		opp00 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 2e058c315025..fccc2b2f327d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -83,6 +83,13 @@
 	};
 };
 
+&cpu_alert0 {
+	temperature = <65000>;
+};
+&cpu_alert1 {
+	temperature = <68000>;
+};
+
 &cpu_l0 {
 	cpu-supply = <&vdd_cpu_l>;
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 92c2207e686c..59858f2dc8b9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2221,13 +2221,11 @@
 		pcfg_input_pull_up: pcfg-input-pull-up {
 			input-enable;
 			bias-pull-up;
-			drive-strength = <2>;
 		};
 
 		pcfg_input_pull_down: pcfg-input-pull-down {
 			input-enable;
 			bias-pull-down;
-			drive-strength = <2>;
 		};
 
 		clock {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 539ef8cc7792..bab46db2b18c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -521,6 +521,8 @@
 };
 
 &i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
 	rockchip,trcm-sync-tx-only;
 	status = "okay";
 };
@@ -642,7 +644,7 @@
 	disable-wp;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 164708f1eb67..1d423daae971 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -966,6 +966,7 @@
 		clock-names = "aclk_mst", "aclk_slv",
 			      "aclk_dbi", "pclk", "aux";
 		device_type = "pci";
+		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &pcie_intc 0>,
 				<0 0 0 2 &pcie_intc 1>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
index 7069f51bc120..99136adb1857 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
@@ -24,7 +24,7 @@
 	snps,dis_enblslpm_quirk;
 	snps,dis_u2_susphy_quirk;
 	snps,dis_u3_susphy_quirk;
-	snps,usb2_gadget_lpm_disable;
+	snps,usb2-gadget-lpm-disable;
 	phy-names = "usb2-phy", "usb3-phy";
 	phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
index a3cfa8113ffb..4c960f455461 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
@@ -24,7 +24,7 @@
 	snps,dis_enblslpm_quirk;
 	snps,dis_u2_susphy_quirk;
 	snps,dis_u3_susphy_quirk;
-	snps,usb2_gadget_lpm_disable;
+	snps,usb2-gadget-lpm-disable;
 	phy-names = "usb2-phy", "usb3-phy";
 	phys = <&usb1_hsphy0>, <&usb1_ssphy0>;
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index d0abb9aa0e9e..e3852c946352 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -55,14 +55,14 @@
 		samsung,pins = "gpf5-0";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	ufs_refclk_out: ufs-refclk-out-pins {
 		samsung,pins = "gpf5-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
@@ -239,105 +239,105 @@
 		samsung,pins = "gpb6-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb6-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c0_bus: hs-i2c0-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c1_bus: hs-i2c1-bus-pins {
 		samsung,pins = "gpb0-2", "gpb0-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c2_bus: hs-i2c2-bus-pins {
 		samsung,pins = "gpb0-4", "gpb0-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c3_bus: hs-i2c3-bus-pins {
 		samsung,pins = "gpb0-6", "gpb0-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c4_bus: hs-i2c4-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c5_bus: hs-i2c5-bus-pins {
 		samsung,pins = "gpb1-2", "gpb1-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c6_bus: hs-i2c6-bus-pins {
 		samsung,pins = "gpb1-4", "gpb1-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c7_bus: hs-i2c7-bus-pins {
 		samsung,pins = "gpb1-6", "gpb1-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart0_data: uart0-data-pins {
 		samsung,pins = "gpb7-0", "gpb7-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data-pins {
 		samsung,pins = "gpb7-4", "gpb7-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h linux-libre-6.1.22-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
index 6ffbda362493..c397d02208a0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
@@ -16,9 +16,9 @@
 #define FSD_PIN_PULL_UP			3
 
 #define FSD_PIN_DRV_LV1			0
-#define FSD_PIN_DRV_LV2			2
-#define FSD_PIN_DRV_LV3			1
-#define FSD_PIN_DRV_LV4			3
+#define FSD_PIN_DRV_LV2			1
+#define FSD_PIN_DRV_LV4			2
+#define FSD_PIN_DRV_LV6			3
 
 #define FSD_PIN_FUNC_INPUT		0
 #define FSD_PIN_FUNC_OUTPUT		1
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 03660476364f..edcf6b271881 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -306,7 +306,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 172 0>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -316,7 +317,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 173 0>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -326,7 +328,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 174 0>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index f56c803560f2..df2d8f36a31b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -42,6 +42,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 147 0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@4b10000 {
@@ -52,6 +53,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 148 0>;
+		status = "disabled";
 	};
 
 	mcu_gpio_intr: interrupt-controller@4210000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 4005a73cfea9..ebb1c5ce7aec 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -120,7 +120,6 @@
 		dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
 				<&main_udmap 0x4003>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 7e8552fd2b6a..50009f963a32 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -80,7 +80,7 @@
 	};
 };
 
-&wkup_pmx0 {
+&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index e5be78a58682..f04c6c890c33 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -56,7 +56,34 @@
 	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x4301c000 0x00 0x178>;
+		reg = <0x00 0x4301c000 0x00 0x34>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@0x4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@0x4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0xec>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@0x4301c174 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c174 0x00 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -386,7 +413,6 @@
 		dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
 		       <&mcu_udmap 0x7503>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@40910000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 917c9dc99efa..603ddda5127f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -337,7 +337,6 @@
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 34e7d577ae13..c89f28235812 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -60,7 +60,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <148>;
-		ti,interrupt-ranges = <8 360 56>;
+		ti,interrupt-ranges = <8 392 56>;
 	};
 
 	main_pmx0: pinctrl@11c000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..f0644851602c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -65,7 +65,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <125>;
-		ti,interrupt-ranges = <16 928 16>;
+		ti,interrupt-ranges = <16 960 16>;
 	};
 
 	mcu_conf: syscon@40f00000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi linux-libre-6.1.22-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index a549265e55f6..7c1af75f33a0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ linux-libre-6.1.22-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -825,6 +825,7 @@
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x860>;
 				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
 				/* dma-coherent; */
 			};
 		};
@@ -851,6 +852,7 @@
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x861>;
 				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
 				/* dma-coherent; */
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/Kconfig linux-libre-6.1.22-gnu/arch/arm64/crypto/Kconfig
index 8bd80508a710..4b121dc0cfba 100644
--- linux-libre-6.1-gnu/arch/arm64/crypto/Kconfig
+++ linux-libre-6.1.22-gnu/arch/arm64/crypto/Kconfig
@@ -96,6 +96,17 @@ config CRYPTO_SHA3_ARM64
 	  Architecture: arm64 using:
 	  - ARMv8.2 Crypto Extensions
 
+config CRYPTO_SM3_NEON
+	tristate "Hash functions: SM3 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SM3
+	help
+	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
 config CRYPTO_SM3_ARM64_CE
 	tristate "Hash functions: SM3 (ARMv8.2 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/Makefile linux-libre-6.1.22-gnu/arch/arm64/crypto/Makefile
index 24bb0c4610de..087f1625e775 100644
--- linux-libre-6.1-gnu/arch/arm64/crypto/Makefile
+++ linux-libre-6.1.22-gnu/arch/arm64/crypto/Makefile
@@ -17,6 +17,9 @@ sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o
 obj-$(CONFIG_CRYPTO_SHA3_ARM64) += sha3-ce.o
 sha3-ce-y := sha3-ce-glue.o sha3-ce-core.o
 
+obj-$(CONFIG_CRYPTO_SM3_NEON) += sm3-neon.o
+sm3-neon-y := sm3-neon-glue.o sm3-neon-core.o
+
 obj-$(CONFIG_CRYPTO_SM3_ARM64_CE) += sm3-ce.o
 sm3-ce-y := sm3-ce-glue.o sm3-ce-core.o
 
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/sm3-neon-core.S linux-libre-6.1.22-gnu/arch/arm64/crypto/sm3-neon-core.S
new file mode 100644
index 000000000000..4357e0e51be3
--- /dev/null
+++ linux-libre-6.1.22-gnu/arch/arm64/crypto/sm3-neon-core.S
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sm3-neon-core.S - SM3 secure hash using NEON instructions
+ *
+ * Linux/arm64 port of the libgcrypt SM3 implementation for AArch64
+ *
+ * Copyright (C) 2021 Jussi Kivilinna <jussi.kivilinna@iki.fi>
+ * Copyright (c) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+
+/* Context structure */
+
+#define state_h0 0
+#define state_h1 4
+#define state_h2 8
+#define state_h3 12
+#define state_h4 16
+#define state_h5 20
+#define state_h6 24
+#define state_h7 28
+
+/* Stack structure */
+
+#define STACK_W_SIZE        (32 * 2 * 3)
+
+#define STACK_W             (0)
+#define STACK_SIZE          (STACK_W + STACK_W_SIZE)
+
+/* Register macros */
+
+#define RSTATE x0
+#define RDATA  x1
+#define RNBLKS x2
+#define RKPTR  x28
+#define RFRAME x29
+
+#define ra w3
+#define rb w4
+#define rc w5
+#define rd w6
+#define re w7
+#define rf w8
+#define rg w9
+#define rh w10
+
+#define t0 w11
+#define t1 w12
+#define t2 w13
+#define t3 w14
+#define t4 w15
+#define t5 w16
+#define t6 w17
+
+#define k_even w19
+#define k_odd w20
+
+#define addr0 x21
+#define addr1 x22
+
+#define s0 w23
+#define s1 w24
+#define s2 w25
+#define s3 w26
+
+#define W0 v0
+#define W1 v1
+#define W2 v2
+#define W3 v3
+#define W4 v4
+#define W5 v5
+
+#define XTMP0 v6
+#define XTMP1 v7
+#define XTMP2 v16
+#define XTMP3 v17
+#define XTMP4 v18
+#define XTMP5 v19
+#define XTMP6 v20
+
+/* Helper macros. */
+
+#define _(...) /*_*/
+
+#define clear_vec(x) \
+	movi	x.8h, #0;
+
+#define rolw(o, a, n) \
+	ror	o, a, #(32 - n);
+
+/* Round function macros. */
+
+#define GG1_1(x, y, z, o, t) \
+	eor	o, x, y;
+#define GG1_2(x, y, z, o, t) \
+	eor	o, o, z;
+#define GG1_3(x, y, z, o, t)
+
+#define FF1_1(x, y, z, o, t) GG1_1(x, y, z, o, t)
+#define FF1_2(x, y, z, o, t)
+#define FF1_3(x, y, z, o, t) GG1_2(x, y, z, o, t)
+
+#define GG2_1(x, y, z, o, t) \
+	bic	o, z, x;
+#define GG2_2(x, y, z, o, t) \
+	and	t, y, x;
+#define GG2_3(x, y, z, o, t) \
+	eor	o, o, t;
+
+#define FF2_1(x, y, z, o, t) \
+	eor	o, x, y;
+#define FF2_2(x, y, z, o, t) \
+	and	t, x, y; \
+	and	o, o, z;
+#define FF2_3(x, y, z, o, t) \
+	eor	o, o, t;
+
+#define R(i, a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	K_LOAD(round);                                                        \
+	ldr	t5, [sp, #(wtype##_W1_ADDR(round, widx))];                    \
+	rolw(t0, a, 12);                              /* rol(a, 12) => t0 */  \
+      IOP(1, iop_param);                                                      \
+	FF##i##_1(a, b, c, t1, t2);                                           \
+	ldr	t6, [sp, #(wtype##_W1W2_ADDR(round, widx))];                  \
+	add	k, k, e;                                                      \
+      IOP(2, iop_param);                                                      \
+	GG##i##_1(e, f, g, t3, t4);                                           \
+	FF##i##_2(a, b, c, t1, t2);                                           \
+      IOP(3, iop_param);                                                      \
+	add	k, k, t0;                                                     \
+	add	h, h, t5;                                                     \
+	add	d, d, t6;                     /* w1w2 + d => d */             \
+      IOP(4, iop_param);                                                      \
+	rolw(k, k, 7);                        /* rol (t0 + e + t), 7) => k */ \
+	GG##i##_2(e, f, g, t3, t4);                                           \
+	add	h, h, k;                      /* h + w1 + k => h */           \
+      IOP(5, iop_param);                                                      \
+	FF##i##_3(a, b, c, t1, t2);                                           \
+	eor	t0, t0, k;                    /* k ^ t0 => t0 */              \
+	GG##i##_3(e, f, g, t3, t4);                                           \
+	add	d, d, t1;                     /* FF(a,b,c) + d => d */        \
+      IOP(6, iop_param);                                                      \
+	add	t3, t3, h;                    /* GG(e,f,g) + h => t3 */       \
+	rolw(b, b, 9);                        /* rol(b, 9) => b */            \
+	eor	h, t3, t3, ror #(32-9);                                       \
+      IOP(7, iop_param);                                                      \
+	add	d, d, t0;                     /* t0 + d => d */               \
+	rolw(f, f, 19);                       /* rol(f, 19) => f */           \
+      IOP(8, iop_param);                                                      \
+	eor	h, h, t3, ror #(32-17);       /* P0(t3) => h */
+
+#define R1(a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	R(1, ##a, ##b, ##c, ##d, ##e, ##f, ##g, ##h, ##k, K_LOAD, round, widx, wtype, IOP, iop_param)
+
+#define R2(a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	R(2, ##a, ##b, ##c, ##d, ##e, ##f, ##g, ##h, ##k, K_LOAD, round, widx, wtype, IOP, iop_param)
+
+#define KL(round) \
+	ldp	k_even, k_odd, [RKPTR, #(4*(round))];
+
+/* Input expansion macros. */
+
+/* Byte-swapped input address. */
+#define IW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((round) / 4) * 64 + (offs) + ((widx) * 4))
+
+/* Expanded input address. */
+#define XW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((((round) / 3) - 4) % 2) * 64 + (offs) + ((widx) * 4))
+
+/* Rounds 1-12, byte-swapped input block addresses. */
+#define IW_W1_ADDR(round, widx)   IW_W_ADDR(round, widx, 32)
+#define IW_W1W2_ADDR(round, widx) IW_W_ADDR(round, widx, 48)
+
+/* Rounds 1-12, expanded input block addresses. */
+#define XW_W1_ADDR(round, widx)   XW_W_ADDR(round, widx, 0)
+#define XW_W1W2_ADDR(round, widx) XW_W_ADDR(round, widx, 16)
+
+/* Input block loading.
+ * Interleaving within round function needed for in-order CPUs. */
+#define LOAD_W_VEC_1_1() \
+	add	addr0, sp, #IW_W1_ADDR(0, 0);
+#define LOAD_W_VEC_1_2() \
+	add	addr1, sp, #IW_W1_ADDR(4, 0);
+#define LOAD_W_VEC_1_3() \
+	ld1	{W0.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_4() \
+	ld1	{W1.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_5() \
+	ld1	{W2.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_6() \
+	ld1	{W3.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_7() \
+	rev32	XTMP0.16b, W0.16b;
+#define LOAD_W_VEC_1_8() \
+	rev32	XTMP1.16b, W1.16b;
+#define LOAD_W_VEC_2_1() \
+	rev32	XTMP2.16b, W2.16b;
+#define LOAD_W_VEC_2_2() \
+	rev32	XTMP3.16b, W3.16b;
+#define LOAD_W_VEC_2_3() \
+	eor	XTMP4.16b, XTMP1.16b, XTMP0.16b;
+#define LOAD_W_VEC_2_4() \
+	eor	XTMP5.16b, XTMP2.16b, XTMP1.16b;
+#define LOAD_W_VEC_2_5() \
+	st1	{XTMP0.16b}, [addr0], #16;
+#define LOAD_W_VEC_2_6() \
+	st1	{XTMP4.16b}, [addr0]; \
+	add	addr0, sp, #IW_W1_ADDR(8, 0);
+#define LOAD_W_VEC_2_7() \
+	eor	XTMP6.16b, XTMP3.16b, XTMP2.16b;
+#define LOAD_W_VEC_2_8() \
+	ext	W0.16b, XTMP0.16b, XTMP0.16b, #8;  /* W0: xx, w0, xx, xx */
+#define LOAD_W_VEC_3_1() \
+	mov	W2.16b, XTMP1.16b;                 /* W2: xx, w6, w5, w4 */
+#define LOAD_W_VEC_3_2() \
+	st1	{XTMP1.16b}, [addr1], #16;
+#define LOAD_W_VEC_3_3() \
+	st1	{XTMP5.16b}, [addr1]; \
+	ext	W1.16b, XTMP0.16b, XTMP0.16b, #4;  /* W1: xx, w3, w2, w1 */
+#define LOAD_W_VEC_3_4() \
+	ext	W3.16b, XTMP1.16b, XTMP2.16b, #12; /* W3: xx, w9, w8, w7 */
+#define LOAD_W_VEC_3_5() \
+	ext	W4.16b, XTMP2.16b, XTMP3.16b, #8;  /* W4: xx, w12, w11, w10 */
+#define LOAD_W_VEC_3_6() \
+	st1	{XTMP2.16b}, [addr0], #16;
+#define LOAD_W_VEC_3_7() \
+	st1	{XTMP6.16b}, [addr0];
+#define LOAD_W_VEC_3_8() \
+	ext	W5.16b, XTMP3.16b, XTMP3.16b, #4;  /* W5: xx, w15, w14, w13 */
+
+#define LOAD_W_VEC_1(iop_num, ...) \
+	LOAD_W_VEC_1_##iop_num()
+#define LOAD_W_VEC_2(iop_num, ...) \
+	LOAD_W_VEC_2_##iop_num()
+#define LOAD_W_VEC_3(iop_num, ...) \
+	LOAD_W_VEC_3_##iop_num()
+
+/* Message scheduling. Note: 3 words per vector register.
+ * Interleaving within round function needed for in-order CPUs. */
+#define SCHED_W_1_1(round, w0, w1, w2, w3, w4, w5) \
+	/* Load (w[i - 16]) => XTMP0 */            \
+	/* Load (w[i - 13]) => XTMP5 */            \
+	ext	XTMP0.16b, w0.16b, w0.16b, #12;    /* XTMP0: w0, xx, xx, xx */
+#define SCHED_W_1_2(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP5.16b, w1.16b, w1.16b, #12;
+#define SCHED_W_1_3(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP0.16b, XTMP0.16b, w1.16b, #12; /* XTMP0: xx, w2, w1, w0 */
+#define SCHED_W_1_4(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP5.16b, XTMP5.16b, w2.16b, #12;
+#define SCHED_W_1_5(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 9] == w3 */                       \
+	/* W3 ^ XTMP0 => XTMP0 */                  \
+	eor	XTMP0.16b, XTMP0.16b, w3.16b;
+#define SCHED_W_1_6(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 3] == w5 */                       \
+	/* rol(XMM5, 15) ^ XTMP0 => XTMP0 */       \
+	/* rol(XTMP5, 7) => XTMP1 */               \
+	add	addr0, sp, #XW_W1_ADDR((round), 0); \
+	shl	XTMP2.4s, w5.4s, #15;
+#define SCHED_W_1_7(round, w0, w1, w2, w3, w4, w5) \
+	shl	XTMP1.4s, XTMP5.4s, #7;
+#define SCHED_W_1_8(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP2.4s, w5.4s, #(32-15);
+#define SCHED_W_2_1(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP1.4s, XTMP5.4s, #(32-7);
+#define SCHED_W_2_2(round, w0, w1, w2, w3, w4, w5) \
+	eor	XTMP0.16b, XTMP0.16b, XTMP2.16b;
+#define SCHED_W_2_3(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 6] == W4 */                       \
+	/* W4 ^ XTMP1 => XTMP1 */                  \
+	eor	XTMP1.16b, XTMP1.16b, w4.16b;
+#define SCHED_W_2_4(round, w0, w1, w2, w3, w4, w5) \
+	/* P1(XTMP0) ^ XTMP1 => W0 */              \
+	shl	XTMP3.4s, XTMP0.4s, #15;
+#define SCHED_W_2_5(round, w0, w1, w2, w3, w4, w5) \
+	shl	XTMP4.4s, XTMP0.4s, #23;
+#define SCHED_W_2_6(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, XTMP1.16b, XTMP0.16b;
+#define SCHED_W_2_7(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP3.4s, XTMP0.4s, #(32-15);
+#define SCHED_W_2_8(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP4.4s, XTMP0.4s, #(32-23);
+#define SCHED_W_3_1(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, w0.16b, XTMP3.16b;
+#define SCHED_W_3_2(round, w0, w1, w2, w3, w4, w5) \
+	/* Load (w[i - 3]) => XTMP2 */             \
+	ext	XTMP2.16b, w4.16b, w4.16b, #12;
+#define SCHED_W_3_3(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, w0.16b, XTMP4.16b;
+#define SCHED_W_3_4(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP2.16b, XTMP2.16b, w5.16b, #12;
+#define SCHED_W_3_5(round, w0, w1, w2, w3, w4, w5) \
+	/* W1 ^ W2 => XTMP3 */                     \
+	eor	XTMP3.16b, XTMP2.16b, w0.16b;
+#define SCHED_W_3_6(round, w0, w1, w2, w3, w4, w5)
+#define SCHED_W_3_7(round, w0, w1, w2, w3, w4, w5) \
+	st1	{XTMP2.16b-XTMP3.16b}, [addr0];
+#define SCHED_W_3_8(round, w0, w1, w2, w3, w4, w5)
+
+#define SCHED_W_W0W1W2W3W4W5_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W0, W1, W2, W3, W4, W5)
+#define SCHED_W_W0W1W2W3W4W5_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W0, W1, W2, W3, W4, W5)
+#define SCHED_W_W0W1W2W3W4W5_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W0, W1, W2, W3, W4, W5)
+
+#define SCHED_W_W1W2W3W4W5W0_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W1, W2, W3, W4, W5, W0)
+#define SCHED_W_W1W2W3W4W5W0_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W1, W2, W3, W4, W5, W0)
+#define SCHED_W_W1W2W3W4W5W0_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W1, W2, W3, W4, W5, W0)
+
+#define SCHED_W_W2W3W4W5W0W1_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W2, W3, W4, W5, W0, W1)
+#define SCHED_W_W2W3W4W5W0W1_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W2, W3, W4, W5, W0, W1)
+#define SCHED_W_W2W3W4W5W0W1_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W2, W3, W4, W5, W0, W1)
+
+#define SCHED_W_W3W4W5W0W1W2_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W3, W4, W5, W0, W1, W2)
+#define SCHED_W_W3W4W5W0W1W2_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W3, W4, W5, W0, W1, W2)
+#define SCHED_W_W3W4W5W0W1W2_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W3, W4, W5, W0, W1, W2)
+
+#define SCHED_W_W4W5W0W1W2W3_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W4, W5, W0, W1, W2, W3)
+#define SCHED_W_W4W5W0W1W2W3_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W4, W5, W0, W1, W2, W3)
+#define SCHED_W_W4W5W0W1W2W3_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W4, W5, W0, W1, W2, W3)
+
+#define SCHED_W_W5W0W1W2W3W4_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W5, W0, W1, W2, W3, W4)
+#define SCHED_W_W5W0W1W2W3W4_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W5, W0, W1, W2, W3, W4)
+#define SCHED_W_W5W0W1W2W3W4_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W5, W0, W1, W2, W3, W4)
+
+
+	/*
+	 * Transform blocks*64 bytes (blocks*16 32-bit words) at 'src'.
+	 *
+	 * void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
+	 *                         int blocks)
+	 */
+	.text
+.align 3
+SYM_TYPED_FUNC_START(sm3_neon_transform)
+	ldp		ra, rb, [RSTATE, #0]
+	ldp		rc, rd, [RSTATE, #8]
+	ldp		re, rf, [RSTATE, #16]
+	ldp		rg, rh, [RSTATE, #24]
+
+	stp		x28, x29, [sp, #-16]!
+	stp		x19, x20, [sp, #-16]!
+	stp		x21, x22, [sp, #-16]!
+	stp		x23, x24, [sp, #-16]!
+	stp		x25, x26, [sp, #-16]!
+	mov		RFRAME, sp
+
+	sub		addr0, sp, #STACK_SIZE
+	adr_l		RKPTR, .LKtable
+	and		sp, addr0, #(~63)
+
+	/* Preload first block. */
+	LOAD_W_VEC_1(1, 0)
+	LOAD_W_VEC_1(2, 0)
+	LOAD_W_VEC_1(3, 0)
+	LOAD_W_VEC_1(4, 0)
+	LOAD_W_VEC_1(5, 0)
+	LOAD_W_VEC_1(6, 0)
+	LOAD_W_VEC_1(7, 0)
+	LOAD_W_VEC_1(8, 0)
+	LOAD_W_VEC_2(1, 0)
+	LOAD_W_VEC_2(2, 0)
+	LOAD_W_VEC_2(3, 0)
+	LOAD_W_VEC_2(4, 0)
+	LOAD_W_VEC_2(5, 0)
+	LOAD_W_VEC_2(6, 0)
+	LOAD_W_VEC_2(7, 0)
+	LOAD_W_VEC_2(8, 0)
+	LOAD_W_VEC_3(1, 0)
+	LOAD_W_VEC_3(2, 0)
+	LOAD_W_VEC_3(3, 0)
+	LOAD_W_VEC_3(4, 0)
+	LOAD_W_VEC_3(5, 0)
+	LOAD_W_VEC_3(6, 0)
+	LOAD_W_VEC_3(7, 0)
+	LOAD_W_VEC_3(8, 0)
+
+.balign 16
+.Loop:
+	/* Transform 0-3 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 0, 0, IW, _, 0)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  1, 1, IW, _, 0)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 2, 2, IW, _, 0)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  3, 3, IW, _, 0)
+
+	/* Transform 4-7 + Precalc 12-14 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 4, 0, IW, _, 0)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  5, 1, IW, _, 0)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 6, 2, IW, SCHED_W_W0W1W2W3W4W5_1, 12)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  7, 3, IW, SCHED_W_W0W1W2W3W4W5_2, 12)
+
+	/* Transform 8-11 + Precalc 12-17 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 8, 0, IW, SCHED_W_W0W1W2W3W4W5_3, 12)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  9, 1, IW, SCHED_W_W1W2W3W4W5W0_1, 15)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 10, 2, IW, SCHED_W_W1W2W3W4W5W0_2, 15)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  11, 3, IW, SCHED_W_W1W2W3W4W5W0_3, 15)
+
+	/* Transform 12-14 + Precalc 18-20 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 12, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 18)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  13, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 18)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 14, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 18)
+
+	/* Transform 15-17 + Precalc 21-23 */
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  15, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 21)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 16, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 21)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  17, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 21)
+
+	/* Transform 18-20 + Precalc 24-26 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 18, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 24)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  19, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 24)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 20, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 24)
+
+	/* Transform 21-23 + Precalc 27-29 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  21, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 27)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 22, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 27)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  23, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 27)
+
+	/* Transform 24-26 + Precalc 30-32 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 24, 0, XW, SCHED_W_W0W1W2W3W4W5_1, 30)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  25, 1, XW, SCHED_W_W0W1W2W3W4W5_2, 30)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 26, 2, XW, SCHED_W_W0W1W2W3W4W5_3, 30)
+
+	/* Transform 27-29 + Precalc 33-35 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  27, 0, XW, SCHED_W_W1W2W3W4W5W0_1, 33)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 28, 1, XW, SCHED_W_W1W2W3W4W5W0_2, 33)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  29, 2, XW, SCHED_W_W1W2W3W4W5W0_3, 33)
+
+	/* Transform 30-32 + Precalc 36-38 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 30, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 36)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  31, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 36)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 32, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 36)
+
+	/* Transform 33-35 + Precalc 39-41 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  33, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 39)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 34, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 39)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  35, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 39)
+
+	/* Transform 36-38 + Precalc 42-44 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 36, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 42)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  37, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 42)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 38, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 42)
+
+	/* Transform 39-41 + Precalc 45-47 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  39, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 45)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 40, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 45)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  41, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 45)
+
+	/* Transform 42-44 + Precalc 48-50 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 42, 0, XW, SCHED_W_W0W1W2W3W4W5_1, 48)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  43, 1, XW, SCHED_W_W0W1W2W3W4W5_2, 48)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 44, 2, XW, SCHED_W_W0W1W2W3W4W5_3, 48)
+
+	/* Transform 45-47 + Precalc 51-53 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  45, 0, XW, SCHED_W_W1W2W3W4W5W0_1, 51)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 46, 1, XW, SCHED_W_W1W2W3W4W5W0_2, 51)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  47, 2, XW, SCHED_W_W1W2W3W4W5W0_3, 51)
+
+	/* Transform 48-50 + Precalc 54-56 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 48, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 54)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  49, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 54)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 50, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 54)
+
+	/* Transform 51-53 + Precalc 57-59 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  51, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 57)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 52, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 57)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  53, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 57)
+
+	/* Transform 54-56 + Precalc 60-62 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 54, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 60)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  55, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 60)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 56, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 60)
+
+	/* Transform 57-59 + Precalc 63 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  57, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 63)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 58, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 63)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  59, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 63)
+
+	/* Transform 60 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 60, 0, XW, _, _)
+	subs		RNBLKS, RNBLKS, #1
+	b.eq		.Lend
+
+	/* Transform 61-63 + Preload next block */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  61, 1, XW, LOAD_W_VEC_1, _)
+	ldp		s0, s1, [RSTATE, #0]
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 62, 2, XW, LOAD_W_VEC_2, _)
+	ldp		s2, s3, [RSTATE, #8]
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  63, 0, XW, LOAD_W_VEC_3, _)
+
+	/* Update the chaining variables. */
+	eor		ra, ra, s0
+	eor		rb, rb, s1
+	ldp		s0, s1, [RSTATE, #16]
+	eor		rc, rc, s2
+	ldp		k_even, k_odd, [RSTATE, #24]
+	eor		rd, rd, s3
+	eor		re, re, s0
+	stp		ra, rb, [RSTATE, #0]
+	eor		rf, rf, s1
+	stp		rc, rd, [RSTATE, #8]
+	eor		rg, rg, k_even
+	stp		re, rf, [RSTATE, #16]
+	eor		rh, rh, k_odd
+	stp		rg, rh, [RSTATE, #24]
+	b		.Loop
+
+.Lend:
+	/* Transform 61-63 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  61, 1, XW, _, _)
+	ldp		s0, s1, [RSTATE, #0]
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 62, 2, XW, _, _)
+	ldp		s2, s3, [RSTATE, #8]
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  63, 0, XW, _, _)
+
+	/* Update the chaining variables. */
+	eor		ra, ra, s0
+	clear_vec(W0)
+	eor		rb, rb, s1
+	clear_vec(W1)
+	ldp		s0, s1, [RSTATE, #16]
+	clear_vec(W2)
+	eor		rc, rc, s2
+	clear_vec(W3)
+	ldp		k_even, k_odd, [RSTATE, #24]
+	clear_vec(W4)
+	eor		rd, rd, s3
+	clear_vec(W5)
+	eor		re, re, s0
+	clear_vec(XTMP0)
+	stp		ra, rb, [RSTATE, #0]
+	clear_vec(XTMP1)
+	eor		rf, rf, s1
+	clear_vec(XTMP2)
+	stp		rc, rd, [RSTATE, #8]
+	clear_vec(XTMP3)
+	eor		rg, rg, k_even
+	clear_vec(XTMP4)
+	stp		re, rf, [RSTATE, #16]
+	clear_vec(XTMP5)
+	eor		rh, rh, k_odd
+	clear_vec(XTMP6)
+	stp		rg, rh, [RSTATE, #24]
+
+	/* Clear message expansion area */
+	add		addr0, sp, #STACK_W
+	st1		{W0.16b-W3.16b}, [addr0], #64
+	st1		{W0.16b-W3.16b}, [addr0], #64
+	st1		{W0.16b-W3.16b}, [addr0]
+
+	mov		sp, RFRAME
+
+	ldp		x25, x26, [sp], #16
+	ldp		x23, x24, [sp], #16
+	ldp		x21, x22, [sp], #16
+	ldp		x19, x20, [sp], #16
+	ldp		x28, x29, [sp], #16
+
+	ret
+SYM_FUNC_END(sm3_neon_transform)
+
+
+	.section	".rodata", "a"
+
+	.align 4
+.LKtable:
+	.long 0x79cc4519, 0xf3988a32, 0xe7311465, 0xce6228cb
+	.long 0x9cc45197, 0x3988a32f, 0x7311465e, 0xe6228cbc
+	.long 0xcc451979, 0x988a32f3, 0x311465e7, 0x6228cbce
+	.long 0xc451979c, 0x88a32f39, 0x11465e73, 0x228cbce6
+	.long 0x9d8a7a87, 0x3b14f50f, 0x7629ea1e, 0xec53d43c
+	.long 0xd8a7a879, 0xb14f50f3, 0x629ea1e7, 0xc53d43ce
+	.long 0x8a7a879d, 0x14f50f3b, 0x29ea1e76, 0x53d43cec
+	.long 0xa7a879d8, 0x4f50f3b1, 0x9ea1e762, 0x3d43cec5
+	.long 0x7a879d8a, 0xf50f3b14, 0xea1e7629, 0xd43cec53
+	.long 0xa879d8a7, 0x50f3b14f, 0xa1e7629e, 0x43cec53d
+	.long 0x879d8a7a, 0x0f3b14f5, 0x1e7629ea, 0x3cec53d4
+	.long 0x79d8a7a8, 0xf3b14f50, 0xe7629ea1, 0xcec53d43
+	.long 0x9d8a7a87, 0x3b14f50f, 0x7629ea1e, 0xec53d43c
+	.long 0xd8a7a879, 0xb14f50f3, 0x629ea1e7, 0xc53d43ce
+	.long 0x8a7a879d, 0x14f50f3b, 0x29ea1e76, 0x53d43cec
+	.long 0xa7a879d8, 0x4f50f3b1, 0x9ea1e762, 0x3d43cec5
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/sm3-neon-glue.c linux-libre-6.1.22-gnu/arch/arm64/crypto/sm3-neon-glue.c
new file mode 100644
index 000000000000..7182ee683f14
--- /dev/null
+++ linux-libre-6.1.22-gnu/arch/arm64/crypto/sm3-neon-glue.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sm3-neon-glue.c - SM3 secure hash using NEON instructions
+ *
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sm3.h>
+#include <crypto/sm3_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+
+asmlinkage void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
+				   int blocks);
+
+static int sm3_neon_update(struct shash_desc *desc, const u8 *data,
+			   unsigned int len)
+{
+	if (!crypto_simd_usable()) {
+		sm3_update(shash_desc_ctx(desc), data, len);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm3_neon_final(struct shash_desc *desc, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		sm3_final(shash_desc_ctx(desc), out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_finalize(desc, sm3_neon_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static int sm3_neon_finup(struct shash_desc *desc, const u8 *data,
+			  unsigned int len, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		struct sm3_state *sctx = shash_desc_ctx(desc);
+
+		if (len)
+			sm3_update(sctx, data, len);
+		sm3_final(sctx, out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	if (len)
+		sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	sm3_base_do_finalize(desc, sm3_neon_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static struct shash_alg sm3_alg = {
+	.digestsize		= SM3_DIGEST_SIZE,
+	.init			= sm3_base_init,
+	.update			= sm3_neon_update,
+	.final			= sm3_neon_final,
+	.finup			= sm3_neon_finup,
+	.descsize		= sizeof(struct sm3_state),
+	.base.cra_name		= "sm3",
+	.base.cra_driver_name	= "sm3-neon",
+	.base.cra_blocksize	= SM3_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+};
+
+static int __init sm3_neon_init(void)
+{
+	return crypto_register_shash(&sm3_alg);
+}
+
+static void __exit sm3_neon_fini(void)
+{
+	crypto_unregister_shash(&sm3_alg);
+}
+
+module_init(sm3_neon_init);
+module_exit(sm3_neon_fini);
+
+MODULE_DESCRIPTION("SM3 secure hash using NEON instructions");
+MODULE_AUTHOR("Jussi Kivilinna <jussi.kivilinna@iki.fi>");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_ll_sc.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/atomic_ll_sc.h
index 0890e4f568fb..cbb3d961123b 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_ll_sc.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/atomic_ll_sc.h
@@ -315,7 +315,7 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	"	cbnz	%w0, 1b\n"					\
 	"	" #mb "\n"						\
 	"2:"								\
-	: "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr)	\
+	: "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr)		\
 	: "r" (old1), "r" (old2), "r" (new1), "r" (new2)		\
 	: cl);								\
 									\
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_lse.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/atomic_lse.h
index 52075e93de6c..a94d6dacc029 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_lse.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/atomic_lse.h
@@ -311,7 +311,7 @@ __lse__cmpxchg_double##name(unsigned long old1,				\
 	"	eor	%[old2], %[old2], %[oldval2]\n"			\
 	"	orr	%[old1], %[old1], %[old2]"			\
 	: [old1] "+&r" (x0), [old2] "+&r" (x1),				\
-	  [v] "+Q" (*(unsigned long *)ptr)				\
+	  [v] "+Q" (*(__uint128_t *)ptr)				\
 	: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4),		\
 	  [oldval1] "r" (oldval1), [oldval2] "r" (oldval2)		\
 	: cl);								\
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/efi.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/efi.h
index 439e2bc5d5d8..62c846be2d76 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/efi.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/efi.h
@@ -14,8 +14,16 @@
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg);
 #else
 #define efi_init()
+
+static inline
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	return false;
+}
 #endif
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
@@ -25,6 +33,7 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 ({									\
 	efi_virtmap_load();						\
 	__efi_fpsimd_begin();						\
+	raw_spin_lock(&efi_rt_lock);					\
 })
 
 #undef arch_efi_call_virt
@@ -33,12 +42,23 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 
 #define arch_efi_call_virt_teardown()					\
 ({									\
+	raw_spin_unlock(&efi_rt_lock);					\
 	__efi_fpsimd_end();						\
 	efi_virtmap_unload();						\
 })
 
+extern raw_spinlock_t efi_rt_lock;
+extern u64 *efi_rt_stack_top;
 efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...);
 
+/*
+ * efi_rt_stack_top[-1] contains the value the stack pointer had before
+ * switching to the EFI runtime stack.
+ */
+#define current_in_efi()						\
+	(!preemptible() && efi_rt_stack_top != NULL &&			\
+	 on_task_stack(current, READ_ONCE(efi_rt_stack_top[-1]), 1))
+
 #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
 
 /*
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/kvm_emulate.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/kvm_emulate.h
index 9bdba47f7e14..0d40c48d8132 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/kvm_emulate.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/kvm_emulate.h
@@ -373,8 +373,26 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
 
 static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 {
-	if (kvm_vcpu_abt_iss1tw(vcpu))
-		return true;
+	if (kvm_vcpu_abt_iss1tw(vcpu)) {
+		/*
+		 * Only a permission fault on a S1PTW should be
+		 * considered as a write. Otherwise, page tables baked
+		 * in a read-only memslot will result in an exception
+		 * being delivered in the guest.
+		 *
+		 * The drawback is that we end-up faulting twice if the
+		 * guest is using any of HW AF/DB: a translation fault
+		 * to map the page containing the PT (read only at
+		 * first), then a permission fault to allow the flags
+		 * to be set.
+		 */
+		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
+		case ESR_ELx_FSC_PERM:
+			return true;
+		default:
+			return false;
+		}
+	}
 
 	if (kvm_vcpu_trap_is_iabt(vcpu))
 		return false;
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/mte.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/mte.h
index 760c62f8e22f..3f8199ba265a 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/mte.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/mte.h
@@ -37,6 +37,29 @@ void mte_free_tag_storage(char *storage);
 /* track which pages have valid allocation tags */
 #define PG_mte_tagged	PG_arch_2
 
+static inline void set_page_mte_tagged(struct page *page)
+{
+	/*
+	 * Ensure that the tags written prior to this function are visible
+	 * before the page flags update.
+	 */
+	smp_wmb();
+	set_bit(PG_mte_tagged, &page->flags);
+}
+
+static inline bool page_mte_tagged(struct page *page)
+{
+	bool ret = test_bit(PG_mte_tagged, &page->flags);
+
+	/*
+	 * If the page is tagged, ensure ordering with a likely subsequent
+	 * read of the tags.
+	 */
+	if (ret)
+		smp_rmb();
+	return ret;
+}
+
 void mte_zero_clear_page_tags(void *addr);
 void mte_sync_tags(pte_t old_pte, pte_t pte);
 void mte_copy_page_tags(void *kto, const void *kfrom);
@@ -56,6 +79,13 @@ size_t mte_probe_user_range(const char __user *uaddr, size_t size);
 /* unused if !CONFIG_ARM64_MTE, silence the compiler */
 #define PG_mte_tagged	0
 
+static inline void set_page_mte_tagged(struct page *page)
+{
+}
+static inline bool page_mte_tagged(struct page *page)
+{
+	return false;
+}
 static inline void mte_zero_clear_page_tags(void *addr)
 {
 }
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/pgtable.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/pgtable.h
index edf6625ce965..5d0f1f7b7600 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/pgtable.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/pgtable.h
@@ -682,7 +682,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 #define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
 #define pud_valid(pud)		pte_valid(pud_pte(pud))
 #define pud_user(pud)		pte_user(pud_pte(pud))
-
+#define pud_user_exec(pud)	pte_user_exec(pud_pte(pud))
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
 {
@@ -863,12 +863,12 @@ static inline bool pte_user_accessible_page(pte_t pte)
 
 static inline bool pmd_user_accessible_page(pmd_t pmd)
 {
-	return pmd_leaf(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
+	return pmd_leaf(pmd) && !pmd_present_invalid(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
 }
 
 static inline bool pud_user_accessible_page(pud_t pud)
 {
-	return pud_leaf(pud) && pud_user(pud);
+	return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
 }
 #endif
 
@@ -1050,7 +1050,7 @@ static inline void arch_swap_invalidate_area(int type)
 static inline void arch_swap_restore(swp_entry_t entry, struct folio *folio)
 {
 	if (system_supports_mte() && mte_restore_tags(entry, &folio->page))
-		set_bit(PG_mte_tagged, &folio->flags);
+		set_page_mte_tagged(&folio->page);
 }
 
 #endif /* CONFIG_ARM64_MTE */
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/processor.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/processor.h
index 445aa3af3b76..400f8956328b 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/processor.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/processor.h
@@ -308,13 +308,13 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
 }
 #endif
 
-static inline bool is_ttbr0_addr(unsigned long addr)
+static __always_inline bool is_ttbr0_addr(unsigned long addr)
 {
 	/* entry assembly clears tags for TTBR0 addrs */
 	return addr < TASK_SIZE;
 }
 
-static inline bool is_ttbr1_addr(unsigned long addr)
+static __always_inline bool is_ttbr1_addr(unsigned long addr)
 {
 	/* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */
 	return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/stacktrace.h linux-libre-6.1.22-gnu/arch/arm64/include/asm/stacktrace.h
index 5a0edb064ea4..327cdcfcb1db 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/stacktrace.h
+++ linux-libre-6.1.22-gnu/arch/arm64/include/asm/stacktrace.h
@@ -104,4 +104,19 @@ static inline struct stack_info stackinfo_get_sdei_critical(void)
 #define stackinfo_get_sdei_critical()	stackinfo_get_unknown()
 #endif
 
+#ifdef CONFIG_EFI
+extern u64 *efi_rt_stack_top;
+
+static inline struct stack_info stackinfo_get_efi(void)
+{
+	unsigned long high = (u64)efi_rt_stack_top;
+	unsigned long low = high - THREAD_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+#endif
+
 #endif	/* __ASM_STACKTRACE_H */
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/cpufeature.c linux-libre-6.1.22-gnu/arch/arm64/kernel/cpufeature.c
index b3f37e2209ad..b3eb53847c96 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/cpufeature.c
@@ -2074,8 +2074,10 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 	 * Clear the tags in the zero page. This needs to be done via the
 	 * linear map which has the Tagged attribute.
 	 */
-	if (!test_and_set_bit(PG_mte_tagged, &ZERO_PAGE(0)->flags))
+	if (!page_mte_tagged(ZERO_PAGE(0))) {
 		mte_clear_page_tags(lm_alias(empty_zero_page));
+		set_page_mte_tagged(ZERO_PAGE(0));
+	}
 
 	kasan_init_hw_tags_cpu();
 }
@@ -2756,7 +2758,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP),
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
 	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
 	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
 	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/efi-rt-wrapper.S linux-libre-6.1.22-gnu/arch/arm64/kernel/efi-rt-wrapper.S
index 75691a2641c1..e8ae803662cf 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/efi-rt-wrapper.S
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/efi-rt-wrapper.S
@@ -4,9 +4,10 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 SYM_FUNC_START(__efi_rt_asm_wrapper)
-	stp	x29, x30, [sp, #-32]!
+	stp	x29, x30, [sp, #-112]!
 	mov	x29, sp
 
 	/*
@@ -16,6 +17,22 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	 */
 	stp	x1, x18, [sp, #16]
 
+	/*
+	 * Preserve all callee saved registers and preserve the stack pointer
+	 * value at the base of the EFI runtime stack so we can recover from
+	 * synchronous exceptions occurring while executing the firmware
+	 * routines.
+	 */
+	stp	x19, x20, [sp, #32]
+	stp	x21, x22, [sp, #48]
+	stp	x23, x24, [sp, #64]
+	stp	x25, x26, [sp, #80]
+	stp	x27, x28, [sp, #96]
+
+	ldr_l	x16, efi_rt_stack_top
+	mov	sp, x16
+	stp	x18, x29, [sp, #-16]!
+
 	/*
 	 * We are lucky enough that no EFI runtime services take more than
 	 * 5 arguments, so all are passed in registers rather than via the
@@ -29,9 +46,13 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	mov	x4, x6
 	blr	x8
 
+	mov	x16, sp
+	mov	sp, x29
+	str	xzr, [x16, #8]			// clear recorded task SP value
+
 	ldp	x1, x2, [sp, #16]
 	cmp	x2, x18
-	ldp	x29, x30, [sp], #32
+	ldp	x29, x30, [sp], #112
 	b.ne	0f
 	ret
 0:
@@ -42,6 +63,25 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	 * called with preemption disabled and a separate shadow stack is used
 	 * for interrupts.
 	 */
-	mov	x18, x2
+#ifdef CONFIG_SHADOW_CALL_STACK
+	ldr_l	x18, efi_rt_stack_top
+	ldr	x18, [x18, #-16]
+#endif
+
 	b	efi_handle_corrupted_x18	// tail call
 SYM_FUNC_END(__efi_rt_asm_wrapper)
+
+SYM_CODE_START(__efi_rt_asm_recover)
+	mov	sp, x30
+
+	ldr_l	x16, efi_rt_stack_top		// clear recorded task SP value
+	str	xzr, [x16, #-8]
+
+	ldp	x19, x20, [sp, #32]
+	ldp	x21, x22, [sp, #48]
+	ldp	x23, x24, [sp, #64]
+	ldp	x25, x26, [sp, #80]
+	ldp	x27, x28, [sp, #96]
+	ldp	x29, x30, [sp], #112
+	ret
+SYM_CODE_END(__efi_rt_asm_recover)
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/efi.c linux-libre-6.1.22-gnu/arch/arm64/kernel/efi.c
index a908a37f0367..a30dbe4b95cd 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/efi.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/efi.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 
 #include <asm/efi.h>
+#include <asm/stacktrace.h>
 
 static bool region_is_misaligned(const efi_memory_desc_t *md)
 {
@@ -144,3 +145,52 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
 	pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
 	return s;
 }
+
+DEFINE_RAW_SPINLOCK(efi_rt_lock);
+
+asmlinkage u64 *efi_rt_stack_top __ro_after_init;
+
+asmlinkage efi_status_t __efi_rt_asm_recover(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	 /* Check whether the exception occurred while running the firmware */
+	if (!current_in_efi() || regs->pc >= TASK_SIZE_64)
+		return false;
+
+	pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
+	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+
+	regs->regs[0]	= EFI_ABORTED;
+	regs->regs[30]	= efi_rt_stack_top[-1];
+	regs->pc	= (u64)__efi_rt_asm_recover;
+
+	if (IS_ENABLED(CONFIG_SHADOW_CALL_STACK))
+		regs->regs[18] = efi_rt_stack_top[-2];
+
+	return true;
+}
+
+/* EFI requires 8 KiB of stack space for runtime services */
+static_assert(THREAD_SIZE >= SZ_8K);
+
+static int __init arm64_efi_rt_init(void)
+{
+	void *p;
+
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
+	p = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, GFP_KERNEL,
+			   NUMA_NO_NODE, &&l);
+l:	if (!p) {
+		pr_warn("Failed to allocate EFI runtime stack\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return -ENOMEM;
+	}
+
+	efi_rt_stack_top = p + THREAD_SIZE;
+	return 0;
+}
+core_initcall(arm64_efi_rt_init);
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/elfcore.c linux-libre-6.1.22-gnu/arch/arm64/kernel/elfcore.c
index 27ef7ad3ffd2..2e94d20c4ac7 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/elfcore.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/elfcore.c
@@ -8,28 +8,27 @@
 #include <asm/cpufeature.h>
 #include <asm/mte.h>
 
-#define for_each_mte_vma(vmi, vma)					\
+#define for_each_mte_vma(cprm, i, m)					\
 	if (system_supports_mte())					\
-		for_each_vma(vmi, vma)					\
-			if (vma->vm_flags & VM_MTE)
+		for (i = 0, m = cprm->vma_meta;				\
+		     i < cprm->vma_count;				\
+		     i++, m = cprm->vma_meta + i)			\
+			if (m->flags & VM_MTE)
 
-static unsigned long mte_vma_tag_dump_size(struct vm_area_struct *vma)
+static unsigned long mte_vma_tag_dump_size(struct core_vma_metadata *m)
 {
-	if (vma->vm_flags & VM_DONTDUMP)
-		return 0;
-
-	return vma_pages(vma) * MTE_PAGE_TAG_STORAGE;
+	return (m->dump_size >> PAGE_SHIFT) * MTE_PAGE_TAG_STORAGE;
 }
 
 /* Derived from dump_user_range(); start/end must be page-aligned */
 static int mte_dump_tag_range(struct coredump_params *cprm,
-			      unsigned long start, unsigned long end)
+			      unsigned long start, unsigned long len)
 {
 	int ret = 1;
 	unsigned long addr;
 	void *tags = NULL;
 
-	for (addr = start; addr < end; addr += PAGE_SIZE) {
+	for (addr = start; addr < start + len; addr += PAGE_SIZE) {
 		struct page *page = get_dump_page(addr);
 
 		/*
@@ -47,7 +46,7 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 		 * Pages mapped in user space as !pte_access_permitted() (e.g.
 		 * PROT_EXEC only) may not have the PG_mte_tagged flag set.
 		 */
-		if (!test_bit(PG_mte_tagged, &page->flags)) {
+		if (!page_mte_tagged(page)) {
 			put_page(page);
 			dump_skip(cprm, MTE_PAGE_TAG_STORAGE);
 			continue;
@@ -65,7 +64,6 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 		mte_save_page_tags(page_address(page), tags);
 		put_page(page);
 		if (!dump_emit(cprm, tags, MTE_PAGE_TAG_STORAGE)) {
-			mte_free_tag_storage(tags);
 			ret = 0;
 			break;
 		}
@@ -77,13 +75,13 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 	return ret;
 }
 
-Elf_Half elf_core_extra_phdrs(void)
+Elf_Half elf_core_extra_phdrs(struct coredump_params *cprm)
 {
-	struct vm_area_struct *vma;
+	int i;
+	struct core_vma_metadata *m;
 	int vma_count = 0;
-	VMA_ITERATOR(vmi, current->mm, 0);
 
-	for_each_mte_vma(vmi, vma)
+	for_each_mte_vma(cprm, i, m)
 		vma_count++;
 
 	return vma_count;
@@ -91,18 +89,18 @@ Elf_Half elf_core_extra_phdrs(void)
 
 int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
 {
-	struct vm_area_struct *vma;
-	VMA_ITERATOR(vmi, current->mm, 0);
+	int i;
+	struct core_vma_metadata *m;
 
-	for_each_mte_vma(vmi, vma) {
+	for_each_mte_vma(cprm, i, m) {
 		struct elf_phdr phdr;
 
 		phdr.p_type = PT_AARCH64_MEMTAG_MTE;
 		phdr.p_offset = offset;
-		phdr.p_vaddr = vma->vm_start;
+		phdr.p_vaddr = m->start;
 		phdr.p_paddr = 0;
-		phdr.p_filesz = mte_vma_tag_dump_size(vma);
-		phdr.p_memsz = vma->vm_end - vma->vm_start;
+		phdr.p_filesz = mte_vma_tag_dump_size(m);
+		phdr.p_memsz = m->end - m->start;
 		offset += phdr.p_filesz;
 		phdr.p_flags = 0;
 		phdr.p_align = 0;
@@ -114,28 +112,25 @@ int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
 	return 1;
 }
 
-size_t elf_core_extra_data_size(void)
+size_t elf_core_extra_data_size(struct coredump_params *cprm)
 {
-	struct vm_area_struct *vma;
+	int i;
+	struct core_vma_metadata *m;
 	size_t data_size = 0;
-	VMA_ITERATOR(vmi, current->mm, 0);
 
-	for_each_mte_vma(vmi, vma)
-		data_size += mte_vma_tag_dump_size(vma);
+	for_each_mte_vma(cprm, i, m)
+		data_size += mte_vma_tag_dump_size(m);
 
 	return data_size;
 }
 
 int elf_core_write_extra_data(struct coredump_params *cprm)
 {
-	struct vm_area_struct *vma;
-	VMA_ITERATOR(vmi, current->mm, 0);
-
-	for_each_mte_vma(vmi, vma) {
-		if (vma->vm_flags & VM_DONTDUMP)
-			continue;
+	int i;
+	struct core_vma_metadata *m;
 
-		if (!mte_dump_tag_range(cprm, vma->vm_start, vma->vm_end))
+	for_each_mte_vma(cprm, i, m) {
+		if (!mte_dump_tag_range(cprm, m->start, m->dump_size))
 			return 0;
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/hibernate.c linux-libre-6.1.22-gnu/arch/arm64/kernel/hibernate.c
index af5df48ba915..788597a6b6a2 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/hibernate.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/hibernate.c
@@ -271,7 +271,7 @@ static int swsusp_mte_save_tags(void)
 			if (!page)
 				continue;
 
-			if (!test_bit(PG_mte_tagged, &page->flags))
+			if (!page_mte_tagged(page))
 				continue;
 
 			ret = save_tags(page, pfn);
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/mte.c linux-libre-6.1.22-gnu/arch/arm64/kernel/mte.c
index 7467217c1eaf..84a085d536f8 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/mte.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/mte.c
@@ -41,8 +41,10 @@ static void mte_sync_page_tags(struct page *page, pte_t old_pte,
 	if (check_swap && is_swap_pte(old_pte)) {
 		swp_entry_t entry = pte_to_swp_entry(old_pte);
 
-		if (!non_swap_entry(entry) && mte_restore_tags(entry, page))
+		if (!non_swap_entry(entry) && mte_restore_tags(entry, page)) {
+			set_page_mte_tagged(page);
 			return;
+		}
 	}
 
 	if (!pte_is_tagged)
@@ -52,8 +54,10 @@ static void mte_sync_page_tags(struct page *page, pte_t old_pte,
 	 * Test PG_mte_tagged again in case it was racing with another
 	 * set_pte_at().
 	 */
-	if (!test_and_set_bit(PG_mte_tagged, &page->flags))
+	if (!page_mte_tagged(page)) {
 		mte_clear_page_tags(page_address(page));
+		set_page_mte_tagged(page);
+	}
 }
 
 void mte_sync_tags(pte_t old_pte, pte_t pte)
@@ -69,9 +73,11 @@ void mte_sync_tags(pte_t old_pte, pte_t pte)
 
 	/* if PG_mte_tagged is set, tags have already been initialised */
 	for (i = 0; i < nr_pages; i++, page++) {
-		if (!test_bit(PG_mte_tagged, &page->flags))
+		if (!page_mte_tagged(page)) {
 			mte_sync_page_tags(page, old_pte, check_swap,
 					   pte_is_tagged);
+			set_page_mte_tagged(page);
+		}
 	}
 
 	/* ensure the tags are visible before the PTE is set */
@@ -96,8 +102,7 @@ int memcmp_pages(struct page *page1, struct page *page2)
 	 * pages is tagged, set_pte_at() may zero or change the tags of the
 	 * other page via mte_sync_tags().
 	 */
-	if (test_bit(PG_mte_tagged, &page1->flags) ||
-	    test_bit(PG_mte_tagged, &page2->flags))
+	if (page_mte_tagged(page1) || page_mte_tagged(page2))
 		return addr1 != addr2;
 
 	return ret;
@@ -454,7 +459,7 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
 			put_page(page);
 			break;
 		}
-		WARN_ON_ONCE(!test_bit(PG_mte_tagged, &page->flags));
+		WARN_ON_ONCE(!page_mte_tagged(page));
 
 		/* limit access to the end of the page */
 		offset = offset_in_page(addr);
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/ptrace.c linux-libre-6.1.22-gnu/arch/arm64/kernel/ptrace.c
index c2fb5755bbec..92bc9a2d702c 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/ptrace.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/ptrace.c
@@ -1364,7 +1364,7 @@ enum aarch64_regset {
 #ifdef CONFIG_ARM64_SVE
 	REGSET_SVE,
 #endif
-#ifdef CONFIG_ARM64_SVE
+#ifdef CONFIG_ARM64_SME
 	REGSET_SSVE,
 	REGSET_ZA,
 #endif
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/signal.c linux-libre-6.1.22-gnu/arch/arm64/kernel/signal.c
index 9ad911f1647c..43adbfa5ead7 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/signal.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/signal.c
@@ -280,7 +280,12 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 
 		vl = task_get_sme_vl(current);
 	} else {
-		if (!system_supports_sve())
+		/*
+		 * A SME only system use SVE for streaming mode so can
+		 * have a SVE formatted context with a zero VL and no
+		 * payload data.
+		 */
+		if (!system_supports_sve() && !system_supports_sme())
 			return -EINVAL;
 
 		vl = task_get_sve_vl(current);
@@ -729,7 +734,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 			return err;
 	}
 
-	if (system_supports_sve()) {
+	if (system_supports_sve() || system_supports_sme()) {
 		unsigned int vq = 0;
 
 		if (add_all || test_thread_flag(TIF_SVE) ||
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/stacktrace.c linux-libre-6.1.22-gnu/arch/arm64/kernel/stacktrace.c
index 634279b3b03d..83154303e682 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/stacktrace.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kernel/stacktrace.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 ARM Ltd.
  */
 #include <linux/kernel.h>
+#include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/ftrace.h>
 #include <linux/sched.h>
@@ -12,6 +13,7 @@
 #include <linux/sched/task_stack.h>
 #include <linux/stacktrace.h>
 
+#include <asm/efi.h>
 #include <asm/irq.h>
 #include <asm/stack_pointer.h>
 #include <asm/stacktrace.h>
@@ -23,8 +25,8 @@
  *
  * The regs must be on a stack currently owned by the calling task.
  */
-static inline void unwind_init_from_regs(struct unwind_state *state,
-					 struct pt_regs *regs)
+static __always_inline void unwind_init_from_regs(struct unwind_state *state,
+						  struct pt_regs *regs)
 {
 	unwind_init_common(state, current);
 
@@ -58,8 +60,8 @@ static __always_inline void unwind_init_from_caller(struct unwind_state *state)
  * duration of the unwind, or the unwind will be bogus. It is never valid to
  * call this for the current task.
  */
-static inline void unwind_init_from_task(struct unwind_state *state,
-					 struct task_struct *task)
+static __always_inline void unwind_init_from_task(struct unwind_state *state,
+						  struct task_struct *task)
 {
 	unwind_init_common(state, task);
 
@@ -186,7 +188,14 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 			: stackinfo_get_unknown();		\
 	})
 
-noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry,
+#define STACKINFO_EFI						\
+	({							\
+		((task == current) && current_in_efi())		\
+			? stackinfo_get_efi()			\
+			: stackinfo_get_unknown();		\
+	})
+
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 			      void *cookie, struct task_struct *task,
 			      struct pt_regs *regs)
 {
@@ -199,6 +208,9 @@ noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry,
 #if defined(CONFIG_VMAP_STACK) && defined(CONFIG_ARM_SDE_INTERFACE)
 		STACKINFO_SDEI(normal),
 		STACKINFO_SDEI(critical),
+#endif
+#ifdef CONFIG_EFI
+		STACKINFO_EFI,
 #endif
 	};
 	struct unwind_state state = {
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/guest.c linux-libre-6.1.22-gnu/arch/arm64/kvm/guest.c
index 2ff13a3f8479..817fdd1ab778 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/guest.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kvm/guest.c
@@ -1059,7 +1059,7 @@ long kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
 		maddr = page_address(page);
 
 		if (!write) {
-			if (test_bit(PG_mte_tagged, &page->flags))
+			if (page_mte_tagged(page))
 				num_tags = mte_copy_tags_to_user(tags, maddr,
 							MTE_GRANULES_PER_PAGE);
 			else
@@ -1076,7 +1076,7 @@ long kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
 			 * completed fully
 			 */
 			if (num_tags == MTE_GRANULES_PER_PAGE)
-				set_bit(PG_mte_tagged, &page->flags);
+				set_page_mte_tagged(page);
 
 			kvm_release_pfn_dirty(pfn);
 		}
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/mmu.c linux-libre-6.1.22-gnu/arch/arm64/kvm/mmu.c
index 60ee3d9f01f8..2c3759f1f2c5 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/mmu.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kvm/mmu.c
@@ -1110,9 +1110,9 @@ static int sanitise_mte_tags(struct kvm *kvm, kvm_pfn_t pfn,
 		return -EFAULT;
 
 	for (i = 0; i < nr_pages; i++, page++) {
-		if (!test_bit(PG_mte_tagged, &page->flags)) {
+		if (!page_mte_tagged(page)) {
 			mte_clear_page_tags(page_address(page));
-			set_bit(PG_mte_tagged, &page->flags);
+			set_page_mte_tagged(page);
 		}
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v3.c linux-libre-6.1.22-gnu/arch/arm64/kvm/vgic/vgic-v3.c
index 826ff6f2a4e7..5bdada313728 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v3.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kvm/vgic/vgic-v3.c
@@ -350,26 +350,23 @@ retry:
  * The deactivation of the doorbell interrupt will trigger the
  * unmapping of the associated vPE.
  */
-static void unmap_all_vpes(struct vgic_dist *dist)
+static void unmap_all_vpes(struct kvm *kvm)
 {
-	struct irq_desc *desc;
+	struct vgic_dist *dist = &kvm->arch.vgic;
 	int i;
 
-	for (i = 0; i < dist->its_vm.nr_vpes; i++) {
-		desc = irq_to_desc(dist->its_vm.vpes[i]->irq);
-		irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
-	}
+	for (i = 0; i < dist->its_vm.nr_vpes; i++)
+		free_irq(dist->its_vm.vpes[i]->irq, kvm_get_vcpu(kvm, i));
 }
 
-static void map_all_vpes(struct vgic_dist *dist)
+static void map_all_vpes(struct kvm *kvm)
 {
-	struct irq_desc *desc;
+	struct vgic_dist *dist = &kvm->arch.vgic;
 	int i;
 
-	for (i = 0; i < dist->its_vm.nr_vpes; i++) {
-		desc = irq_to_desc(dist->its_vm.vpes[i]->irq);
-		irq_domain_activate_irq(irq_desc_get_irq_data(desc), false);
-	}
+	for (i = 0; i < dist->its_vm.nr_vpes; i++)
+		WARN_ON(vgic_v4_request_vpe_irq(kvm_get_vcpu(kvm, i),
+						dist->its_vm.vpes[i]->irq));
 }
 
 /**
@@ -394,7 +391,7 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
 	 * and enabling of the doorbells have already been done.
 	 */
 	if (kvm_vgic_global_state.has_gicv4_1) {
-		unmap_all_vpes(dist);
+		unmap_all_vpes(kvm);
 		vlpi_avail = true;
 	}
 
@@ -444,7 +441,7 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
 
 out:
 	if (vlpi_avail)
-		map_all_vpes(dist);
+		map_all_vpes(kvm);
 
 	return ret;
 }
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v4.c linux-libre-6.1.22-gnu/arch/arm64/kvm/vgic/vgic-v4.c
index ad06ba6c9b00..a413718be92b 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v4.c
+++ linux-libre-6.1.22-gnu/arch/arm64/kvm/vgic/vgic-v4.c
@@ -222,6 +222,11 @@ void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val)
 	*val = !!(*ptr & mask);
 }
 
+int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq)
+{
+	return request_irq(irq, vgic_v4_doorbell_handler, 0, "vcpu", vcpu);
+}
+
 /**
  * vgic_v4_init - Initialize the GICv4 data structures
  * @kvm:	Pointer to the VM being initialized
@@ -283,8 +288,7 @@ int vgic_v4_init(struct kvm *kvm)
 			irq_flags &= ~IRQ_NOAUTOEN;
 		irq_set_status_flags(irq, irq_flags);
 
-		ret = request_irq(irq, vgic_v4_doorbell_handler,
-				  0, "vcpu", vcpu);
+		ret = vgic_v4_request_vpe_irq(vcpu, irq);
 		if (ret) {
 			kvm_err("failed to allocate vcpu IRQ%d\n", irq);
 			/*
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic.h linux-libre-6.1.22-gnu/arch/arm64/kvm/vgic/vgic.h
index 0c8da72953f0..23e280fa0a16 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic.h
+++ linux-libre-6.1.22-gnu/arch/arm64/kvm/vgic/vgic.h
@@ -331,5 +331,6 @@ int vgic_v4_init(struct kvm *kvm);
 void vgic_v4_teardown(struct kvm *kvm);
 void vgic_v4_configure_vsgis(struct kvm *kvm);
 void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val);
+int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq);
 
 #endif
diff --git linux-libre-6.1-gnu/arch/arm64/mm/copypage.c linux-libre-6.1.22-gnu/arch/arm64/mm/copypage.c
index 24913271e898..6dbc822332f2 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/copypage.c
+++ linux-libre-6.1.22-gnu/arch/arm64/mm/copypage.c
@@ -21,9 +21,11 @@ void copy_highpage(struct page *to, struct page *from)
 
 	copy_page(kto, kfrom);
 
-	if (system_supports_mte() && test_bit(PG_mte_tagged, &from->flags)) {
-		set_bit(PG_mte_tagged, &to->flags);
+	if (system_supports_mte() && page_mte_tagged(from)) {
+		if (kasan_hw_tags_enabled())
+			page_kasan_tag_reset(to);
 		mte_copy_page_tags(kto, kfrom);
+		set_page_mte_tagged(to);
 	}
 }
 EXPORT_SYMBOL(copy_highpage);
diff --git linux-libre-6.1-gnu/arch/arm64/mm/fault.c linux-libre-6.1.22-gnu/arch/arm64/mm/fault.c
index 5b391490e045..4ee20280133e 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/fault.c
+++ linux-libre-6.1.22-gnu/arch/arm64/mm/fault.c
@@ -30,6 +30,7 @@
 #include <asm/bug.h>
 #include <asm/cmpxchg.h>
 #include <asm/cpufeature.h>
+#include <asm/efi.h>
 #include <asm/exception.h>
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
@@ -353,6 +354,11 @@ static bool is_el1_mte_sync_tag_check_fault(unsigned long esr)
 	return false;
 }
 
+static bool is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
 static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 			      struct pt_regs *regs)
 {
@@ -385,12 +391,16 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 	} else if (addr < PAGE_SIZE) {
 		msg = "NULL pointer dereference";
 	} else {
-		if (kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
+		if (is_translation_fault(esr) &&
+		    kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
 			return;
 
 		msg = "paging request";
 	}
 
+	if (efi_runtime_fixup_exception(regs, msg))
+		return;
+
 	die_kernel_fault(msg, addr, esr, regs);
 }
 
@@ -934,5 +944,5 @@ struct page *alloc_zeroed_user_highpage_movable(struct vm_area_struct *vma,
 void tag_clear_highpage(struct page *page)
 {
 	mte_zero_clear_page_tags(page_address(page));
-	set_bit(PG_mte_tagged, &page->flags);
+	set_page_mte_tagged(page);
 }
diff --git linux-libre-6.1-gnu/arch/arm64/mm/mteswap.c linux-libre-6.1.22-gnu/arch/arm64/mm/mteswap.c
index bed803d8e158..70f913205db9 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/mteswap.c
+++ linux-libre-6.1.22-gnu/arch/arm64/mm/mteswap.c
@@ -24,7 +24,7 @@ int mte_save_tags(struct page *page)
 {
 	void *tag_storage, *ret;
 
-	if (!test_bit(PG_mte_tagged, &page->flags))
+	if (!page_mte_tagged(page))
 		return 0;
 
 	tag_storage = mte_allocate_tag_storage();
diff --git linux-libre-6.1-gnu/arch/ia64/kernel/elfcore.c linux-libre-6.1.22-gnu/arch/ia64/kernel/elfcore.c
index 94680521fbf9..8895df121540 100644
--- linux-libre-6.1-gnu/arch/ia64/kernel/elfcore.c
+++ linux-libre-6.1.22-gnu/arch/ia64/kernel/elfcore.c
@@ -7,7 +7,7 @@
 #include <asm/elf.h>
 
 
-Elf64_Half elf_core_extra_phdrs(void)
+Elf64_Half elf_core_extra_phdrs(struct coredump_params *cprm)
 {
 	return GATE_EHDR->e_phnum;
 }
@@ -60,7 +60,7 @@ int elf_core_write_extra_data(struct coredump_params *cprm)
 	return 1;
 }
 
-size_t elf_core_extra_data_size(void)
+size_t elf_core_extra_data_size(struct coredump_params *cprm)
 {
 	const struct elf_phdr *const gate_phdrs =
 		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);
diff --git linux-libre-6.1-gnu/arch/ia64/kernel/sys_ia64.c linux-libre-6.1.22-gnu/arch/ia64/kernel/sys_ia64.c
index 215bf3f8cb20..4f24910cfe73 100644
--- linux-libre-6.1-gnu/arch/ia64/kernel/sys_ia64.c
+++ linux-libre-6.1.22-gnu/arch/ia64/kernel/sys_ia64.c
@@ -170,6 +170,9 @@ ia64_mremap (unsigned long addr, unsigned long old_len, unsigned long new_len, u
 asmlinkage long
 ia64_clock_getres(const clockid_t which_clock, struct __kernel_timespec __user *tp)
 {
+	struct timespec64 rtn_tp;
+	s64 tick_ns;
+
 	/*
 	 * ia64's clock_gettime() syscall is implemented as a vdso call
 	 * fsys_clock_gettime(). Currently it handles only
@@ -185,8 +188,8 @@ ia64_clock_getres(const clockid_t which_clock, struct __kernel_timespec __user *
 	switch (which_clock) {
 	case CLOCK_REALTIME:
 	case CLOCK_MONOTONIC:
-		s64 tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);
-		struct timespec64 rtn_tp = ns_to_timespec64(tick_ns);
+		tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);
+		rtn_tp = ns_to_timespec64(tick_ns);
 		return put_timespec64(&rtn_tp, tp);
 	}
 
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/cpu-probe.c linux-libre-6.1.22-gnu/arch/loongarch/kernel/cpu-probe.c
index 255a09876ef2..3a3fce2d7846 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/cpu-probe.c
+++ linux-libre-6.1.22-gnu/arch/loongarch/kernel/cpu-probe.c
@@ -94,7 +94,7 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c)
 	c->options = LOONGARCH_CPU_CPUCFG | LOONGARCH_CPU_CSR |
 		     LOONGARCH_CPU_TLB | LOONGARCH_CPU_VINT | LOONGARCH_CPU_WATCH;
 
-	elf_hwcap |= HWCAP_LOONGARCH_CRC32;
+	elf_hwcap = HWCAP_LOONGARCH_CPUCFG | HWCAP_LOONGARCH_CRC32;
 
 	config = read_cpucfg(LOONGARCH_CPUCFG1);
 	if (config & CPUCFG1_UAL) {
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/process.c linux-libre-6.1.22-gnu/arch/loongarch/kernel/process.c
index ddb8ba4eb399..90a5de746332 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/process.c
+++ linux-libre-6.1.22-gnu/arch/loongarch/kernel/process.c
@@ -185,20 +185,14 @@ out:
 
 unsigned long __get_wchan(struct task_struct *task)
 {
-	unsigned long pc;
+	unsigned long pc = 0;
 	struct unwind_state state;
 
 	if (!try_get_task_stack(task))
 		return 0;
 
-	unwind_start(&state, task, NULL);
-	state.sp = thread_saved_fp(task);
-	get_stack_info(state.sp, state.task, &state.stack_info);
-	state.pc = thread_saved_ra(task);
-#ifdef CONFIG_UNWINDER_PROLOGUE
-	state.type = UNWINDER_PROLOGUE;
-#endif
-	for (; !unwind_done(&state); unwind_next_frame(&state)) {
+	for (unwind_start(&state, task, NULL);
+	     !unwind_done(&state); unwind_next_frame(&state)) {
 		pc = unwind_get_return_address(&state);
 		if (!pc)
 			break;
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/time.c linux-libre-6.1.22-gnu/arch/loongarch/kernel/time.c
index 786735dcc8d6..d2b7d5df132a 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/time.c
+++ linux-libre-6.1.22-gnu/arch/loongarch/kernel/time.c
@@ -135,16 +135,17 @@ static int get_timer_irq(void)
 
 int constant_clockevent_init(void)
 {
-	int irq;
 	unsigned int cpu = smp_processor_id();
 	unsigned long min_delta = 0x600;
 	unsigned long max_delta = (1UL << 48) - 1;
 	struct clock_event_device *cd;
-	static int timer_irq_installed = 0;
+	static int irq = 0, timer_irq_installed = 0;
 
-	irq = get_timer_irq();
-	if (irq < 0)
-		pr_err("Failed to map irq %d (timer)\n", irq);
+	if (!timer_irq_installed) {
+		irq = get_timer_irq();
+		if (irq < 0)
+			pr_err("Failed to map irq %d (timer)\n", irq);
+	}
 
 	cd = &per_cpu(constant_clockevent_device, cpu);
 
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_guess.c linux-libre-6.1.22-gnu/arch/loongarch/kernel/unwind_guess.c
index 5afa6064d73e..0c20e5184de6 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_guess.c
+++ linux-libre-6.1.22-gnu/arch/loongarch/kernel/unwind_guess.c
@@ -25,6 +25,12 @@ void unwind_start(struct unwind_state *state, struct task_struct *task,
 	if (regs) {
 		state->sp = regs->regs[3];
 		state->pc = regs->csr_era;
+	} else if (task && task != current) {
+		state->sp = thread_saved_fp(task);
+		state->pc = thread_saved_ra(task);
+	} else {
+		state->sp = (unsigned long)__builtin_frame_address(0);
+		state->pc = (unsigned long)__builtin_return_address(0);
 	}
 
 	state->task = task;
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_prologue.c linux-libre-6.1.22-gnu/arch/loongarch/kernel/unwind_prologue.c
index 4571c3c87cd4..1c5b65756144 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_prologue.c
+++ linux-libre-6.1.22-gnu/arch/loongarch/kernel/unwind_prologue.c
@@ -111,12 +111,22 @@ void unwind_start(struct unwind_state *state, struct task_struct *task,
 		    struct pt_regs *regs)
 {
 	memset(state, 0, sizeof(*state));
+	state->type = UNWINDER_PROLOGUE;
 
-	if (regs &&  __kernel_text_address(regs->csr_era)) {
-		state->pc = regs->csr_era;
+	if (regs) {
 		state->sp = regs->regs[3];
+		state->pc = regs->csr_era;
 		state->ra = regs->regs[1];
-		state->type = UNWINDER_PROLOGUE;
+		if (!__kernel_text_address(state->pc))
+			state->type = UNWINDER_GUESS;
+	} else if (task && task != current) {
+		state->sp = thread_saved_fp(task);
+		state->pc = thread_saved_ra(task);
+		state->ra = 0;
+	} else {
+		state->sp = (unsigned long)__builtin_frame_address(0);
+		state->pc = (unsigned long)__builtin_return_address(0);
+		state->ra = 0;
 	}
 
 	state->task = task;
diff --git linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.c linux-libre-6.1.22-gnu/arch/loongarch/net/bpf_jit.c
index bdcd0c7719a9..2467bfb8889a 100644
--- linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.c
+++ linux-libre-6.1.22-gnu/arch/loongarch/net/bpf_jit.c
@@ -782,7 +782,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 		if (ret < 0)
 			return ret;
 
-		move_imm(ctx, t1, func_addr, is32);
+		move_addr(ctx, t1, func_addr);
 		emit_insn(ctx, jirl, t1, LOONGARCH_GPR_RA, 0);
 		move_reg(ctx, regmap[BPF_REG_0], LOONGARCH_GPR_A0);
 		break;
diff --git linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.h linux-libre-6.1.22-gnu/arch/loongarch/net/bpf_jit.h
index e665ddb0aeb8..093885539e70 100644
--- linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.h
+++ linux-libre-6.1.22-gnu/arch/loongarch/net/bpf_jit.h
@@ -80,6 +80,27 @@ static inline void emit_sext_32(struct jit_ctx *ctx, enum loongarch_gpr reg, boo
 	emit_insn(ctx, addiw, reg, reg, 0);
 }
 
+static inline void move_addr(struct jit_ctx *ctx, enum loongarch_gpr rd, u64 addr)
+{
+	u64 imm_11_0, imm_31_12, imm_51_32, imm_63_52;
+
+	/* lu12iw rd, imm_31_12 */
+	imm_31_12 = (addr >> 12) & 0xfffff;
+	emit_insn(ctx, lu12iw, rd, imm_31_12);
+
+	/* ori rd, rd, imm_11_0 */
+	imm_11_0 = addr & 0xfff;
+	emit_insn(ctx, ori, rd, rd, imm_11_0);
+
+	/* lu32id rd, imm_51_32 */
+	imm_51_32 = (addr >> 32) & 0xfffff;
+	emit_insn(ctx, lu32id, rd, imm_51_32);
+
+	/* lu52id rd, rd, imm_63_52 */
+	imm_63_52 = (addr >> 52) & 0xfff;
+	emit_insn(ctx, lu52id, rd, rd, imm_63_52);
+}
+
 static inline void move_imm(struct jit_ctx *ctx, enum loongarch_gpr rd, long imm, bool is32)
 {
 	long imm_11_0, imm_31_12, imm_51_32, imm_63_52, imm_51_0, imm_51_31;
diff --git linux-libre-6.1-gnu/arch/m68k/68000/entry.S linux-libre-6.1.22-gnu/arch/m68k/68000/entry.S
index 997b54933015..7d63e2f1555a 100644
--- linux-libre-6.1-gnu/arch/m68k/68000/entry.S
+++ linux-libre-6.1.22-gnu/arch/m68k/68000/entry.S
@@ -45,6 +45,8 @@ do_trace:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%sp@(PT_OFF_ORIG_D0),%d1
 	movel	#-ENOSYS,%d0
 	cmpl	#NR_syscalls,%d1
diff --git linux-libre-6.1-gnu/arch/m68k/Kconfig.devices linux-libre-6.1.22-gnu/arch/m68k/Kconfig.devices
index 6a87b4a5fcac..e6e3efac1840 100644
--- linux-libre-6.1-gnu/arch/m68k/Kconfig.devices
+++ linux-libre-6.1.22-gnu/arch/m68k/Kconfig.devices
@@ -19,6 +19,7 @@ config HEARTBEAT
 # We have a dedicated heartbeat LED. :-)
 config PROC_HARDWARE
 	bool "/proc/hardware support"
+	depends on PROC_FS
 	help
 	  Say Y here to support the /proc/hardware file, which gives you
 	  access to information about the machine you're running on,
diff --git linux-libre-6.1-gnu/arch/m68k/coldfire/entry.S linux-libre-6.1.22-gnu/arch/m68k/coldfire/entry.S
index 9f337c70243a..35104c5417ff 100644
--- linux-libre-6.1-gnu/arch/m68k/coldfire/entry.S
+++ linux-libre-6.1.22-gnu/arch/m68k/coldfire/entry.S
@@ -90,6 +90,8 @@ ENTRY(system_call)
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%d3,%a0
 	jbsr	%a0@
 	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/entry.S linux-libre-6.1.22-gnu/arch/m68k/kernel/entry.S
index 18f278bdbd21..42879e6eb651 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/entry.S
+++ linux-libre-6.1.22-gnu/arch/m68k/kernel/entry.S
@@ -184,9 +184,12 @@ do_trace_entry:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0			| optimization for cmpil #-1,%d0
+	jeq	ret_from_syscall
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
 	cmpl	#NR_syscalls,%d0
 	jcs	syscall
+	jra	ret_from_syscall
 badsys:
 	movel	#-ENOSYS,%sp@(PT_OFF_D0)
 	jra	ret_from_syscall
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/setup_mm.c linux-libre-6.1.22-gnu/arch/m68k/kernel/setup_mm.c
index 3a2bb2e8fdad..fbff1cea62ca 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/setup_mm.c
+++ linux-libre-6.1.22-gnu/arch/m68k/kernel/setup_mm.c
@@ -326,16 +326,16 @@ void __init setup_arch(char **cmdline_p)
 		panic("No configuration setup");
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (m68k_ramdisk.size) {
+	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && m68k_ramdisk.size)
 		memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
+
+	paging_init();
+
+	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && m68k_ramdisk.size) {
 		initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
 		initrd_end = initrd_start + m68k_ramdisk.size;
 		pr_info("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
 	}
-#endif
-
-	paging_init();
 
 #ifdef CONFIG_NATFEAT
 	nf_init();
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/traps.c linux-libre-6.1.22-gnu/arch/m68k/kernel/traps.c
index 5c8cba0efc63..a700807c9b6d 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/traps.c
+++ linux-libre-6.1.22-gnu/arch/m68k/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/kallsyms.h>
+#include <linux/extable.h>
 
 #include <asm/setup.h>
 #include <asm/fpu.h>
@@ -545,7 +546,8 @@ static inline void bus_error030 (struct frame *fp)
 			errorcode |= 2;
 
 		if (mmusr & (MMU_I | MMU_WP)) {
-			if (ssw & 4) {
+			/* We might have an exception table for this PC */
+			if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) {
 				pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",
 				       ssw & RW ? "read" : "write",
 				       fp->un.fmtb.daddr,
diff --git linux-libre-6.1-gnu/arch/m68k/mm/motorola.c linux-libre-6.1.22-gnu/arch/m68k/mm/motorola.c
index 2a375637e007..911301224078 100644
--- linux-libre-6.1-gnu/arch/m68k/mm/motorola.c
+++ linux-libre-6.1.22-gnu/arch/m68k/mm/motorola.c
@@ -437,7 +437,7 @@ void __init paging_init(void)
 	}
 
 	min_addr = m68k_memory[0].addr;
-	max_addr = min_addr + m68k_memory[0].size;
+	max_addr = min_addr + m68k_memory[0].size - 1;
 	memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0,
 			  MEMBLOCK_NONE);
 	for (i = 1; i < m68k_num_memory;) {
@@ -452,21 +452,21 @@ void __init paging_init(void)
 		}
 		memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i,
 				  MEMBLOCK_NONE);
-		addr = m68k_memory[i].addr + m68k_memory[i].size;
+		addr = m68k_memory[i].addr + m68k_memory[i].size - 1;
 		if (addr > max_addr)
 			max_addr = addr;
 		i++;
 	}
 	m68k_memoffset = min_addr - PAGE_OFFSET;
-	m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6;
+	m68k_virt_to_node_shift = fls(max_addr - min_addr) - 6;
 
 	module_fixup(NULL, __start_fixup, __stop_fixup);
 	flush_icache();
 
-	high_memory = phys_to_virt(max_addr);
+	high_memory = phys_to_virt(max_addr) + 1;
 
 	min_low_pfn = availmem >> PAGE_SHIFT;
-	max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
+	max_pfn = max_low_pfn = (max_addr >> PAGE_SHIFT) + 1;
 
 	/* Reserve kernel text/data/bss and the memory allocated in head.S */
 	memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
diff --git linux-libre-6.1-gnu/arch/mips/bcm63xx/clk.c linux-libre-6.1.22-gnu/arch/mips/bcm63xx/clk.c
index 6e6756e8fa0a..86a6e2590866 100644
--- linux-libre-6.1-gnu/arch/mips/bcm63xx/clk.c
+++ linux-libre-6.1.22-gnu/arch/mips/bcm63xx/clk.c
@@ -361,6 +361,8 @@ static struct clk clk_periph = {
  */
 int clk_enable(struct clk *clk)
 {
+	if (!clk)
+		return 0;
 	mutex_lock(&clocks_mutex);
 	clk_enable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
diff --git linux-libre-6.1-gnu/arch/mips/boot/dts/ingenic/ci20.dts linux-libre-6.1.22-gnu/arch/mips/boot/dts/ingenic/ci20.dts
index 37c46720c719..8f21d2304737 100644
--- linux-libre-6.1-gnu/arch/mips/boot/dts/ingenic/ci20.dts
+++ linux-libre-6.1.22-gnu/arch/mips/boot/dts/ingenic/ci20.dts
@@ -113,7 +113,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
-		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
+		gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
 };
@@ -438,7 +438,7 @@
 		ingenic,nemc-tAW = <50>;
 		ingenic,nemc-tSTRV = <100>;
 
-		reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&eth0_power>;
 
 		interrupt-parent = <&gpe>;
diff --git linux-libre-6.1-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-board.c linux-libre-6.1.22-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index d09d0769f549..0fd9ac76eb74 100644
--- linux-libre-6.1-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ linux-libre-6.1.22-gnu/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -211,7 +211,7 @@ union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port)
 {
 	union cvmx_helper_link_info result;
 
-	WARN(!octeon_is_simulation(),
+	WARN_ONCE(!octeon_is_simulation(),
 	     "Using deprecated link status - please update your DT");
 
 	/* Unless we fix it later, all links are defaulted to down */
diff --git linux-libre-6.1-gnu/arch/mips/cavium-octeon/executive/cvmx-helper.c linux-libre-6.1.22-gnu/arch/mips/cavium-octeon/executive/cvmx-helper.c
index 6f49fd9be1f3..9abfc4bf9bd8 100644
--- linux-libre-6.1-gnu/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ linux-libre-6.1.22-gnu/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -1096,7 +1096,7 @@ union cvmx_helper_link_info cvmx_helper_link_get(int ipd_port)
 		if (index == 0)
 			result = __cvmx_helper_rgmii_link_get(ipd_port);
 		else {
-			WARN(1, "Using deprecated link status - please update your DT");
+			WARN_ONCE(1, "Using deprecated link status - please update your DT");
 			result.s.full_duplex = 1;
 			result.s.link_up = 1;
 			result.s.speed = 1000;
diff --git linux-libre-6.1-gnu/arch/mips/include/asm/mach-ralink/mt7621.h linux-libre-6.1.22-gnu/arch/mips/include/asm/mach-ralink/mt7621.h
index 6bbf082dd149..79d5bb0e06d6 100644
--- linux-libre-6.1-gnu/arch/mips/include/asm/mach-ralink/mt7621.h
+++ linux-libre-6.1.22-gnu/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -7,10 +7,12 @@
 #ifndef _MT7621_REGS_H_
 #define _MT7621_REGS_H_
 
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+
 #define MT7621_PALMBUS_BASE		0x1C000000
 #define MT7621_PALMBUS_SIZE		0x03FFFFFF
 
-#define MT7621_SYSC_BASE		0x1E000000
+#define MT7621_SYSC_BASE		IOMEM(0x1E000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
diff --git linux-libre-6.1-gnu/arch/mips/include/asm/mach-rc32434/pci.h linux-libre-6.1.22-gnu/arch/mips/include/asm/mach-rc32434/pci.h
index 9a6eefd12757..3eb767c8a4ee 100644
--- linux-libre-6.1-gnu/arch/mips/include/asm/mach-rc32434/pci.h
+++ linux-libre-6.1.22-gnu/arch/mips/include/asm/mach-rc32434/pci.h
@@ -374,7 +374,7 @@ struct pci_msu {
 				 PCI_CFG04_STAT_SSE | \
 				 PCI_CFG04_STAT_PE)
 
-#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+#define KORINA_CNFG1		(KORINA_STAT | KORINA_CMD)
 
 #define KORINA_REVID		0
 #define KORINA_CLASS_CODE	0
diff --git linux-libre-6.1-gnu/arch/mips/include/asm/syscall.h linux-libre-6.1.22-gnu/arch/mips/include/asm/syscall.h
index 25fa651c937d..ebdf4d910af2 100644
--- linux-libre-6.1-gnu/arch/mips/include/asm/syscall.h
+++ linux-libre-6.1.22-gnu/arch/mips/include/asm/syscall.h
@@ -38,7 +38,7 @@ static inline bool mips_syscall_is_indirect(struct task_struct *task,
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {
-	return current_thread_info()->syscall;
+	return task_thread_info(task)->syscall;
 }
 
 static inline void mips_syscall_update_nr(struct task_struct *task,
diff --git linux-libre-6.1-gnu/arch/mips/kernel/vpe-cmp.c linux-libre-6.1.22-gnu/arch/mips/kernel/vpe-cmp.c
index e673603e11e5..92140edb3ce3 100644
--- linux-libre-6.1-gnu/arch/mips/kernel/vpe-cmp.c
+++ linux-libre-6.1.22-gnu/arch/mips/kernel/vpe-cmp.c
@@ -75,7 +75,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -157,6 +156,7 @@ out_dev:
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -169,7 +169,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 
diff --git linux-libre-6.1-gnu/arch/mips/kernel/vpe-mt.c linux-libre-6.1.22-gnu/arch/mips/kernel/vpe-mt.c
index bad6b0891b2b..84a82b551ec3 100644
--- linux-libre-6.1-gnu/arch/mips/kernel/vpe-mt.c
+++ linux-libre-6.1.22-gnu/arch/mips/kernel/vpe-mt.c
@@ -313,7 +313,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -497,6 +496,7 @@ out_dev:
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -509,7 +509,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 
diff --git linux-libre-6.1-gnu/arch/mips/ralink/mt7621.c linux-libre-6.1.22-gnu/arch/mips/ralink/mt7621.c
index fb0565bc34fd..bbf5811afbf2 100644
--- linux-libre-6.1-gnu/arch/mips/ralink/mt7621.c
+++ linux-libre-6.1.22-gnu/arch/mips/ralink/mt7621.c
@@ -25,6 +25,7 @@
 #define MT7621_MEM_TEST_PATTERN         0xaa5555aa
 
 static u32 detect_magic __initdata;
+static struct ralink_soc_info *soc_info_ptr;
 
 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
@@ -97,41 +98,83 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
+static unsigned int __init mt7621_get_soc_name0(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7621_get_soc_name1(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7621_soc_valid(void)
+{
+	if (mt7621_get_soc_name0() == MT7621_CHIP_NAME0 &&
+			mt7621_get_soc_name1() == MT7621_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *mt7621_get_soc_id(void)
+{
+	if (mt7621_soc_valid())
+		return "MT7621";
+	else
+		return "invalid";
+}
+
+static unsigned int __init mt7621_get_soc_rev(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7621_get_soc_ver(void)
+{
+	return (mt7621_get_soc_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
+
+static unsigned int __init mt7621_get_soc_eco(void)
+{
+	return (mt7621_get_soc_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7621_get_soc_revision(void)
+{
+	if (mt7621_get_soc_rev() == 1 && mt7621_get_soc_eco() == 1)
+		return "E2";
+	else
+		return "E1";
+}
+
+static int __init mt7621_soc_dev_init(void)
 {
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
 	if (!soc_dev_attr)
-		return;
+		return -ENOMEM;
 
 	soc_dev_attr->soc_id = "mt7621";
 	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->revision = mt7621_get_soc_revision();
 
-	if (((rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK) == 1 &&
-	    (rev & CHIP_REV_ECO_MASK) == 1)
-		soc_dev_attr->revision = "E2";
-	else
-		soc_dev_attr->revision = "E1";
-
-	soc_dev_attr->data = soc_info;
+	soc_dev_attr->data = soc_info_ptr;
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr);
-		return;
+		return PTR_ERR(soc_dev);
 	}
+
+	return 0;
 }
+device_initcall(mt7621_soc_dev_init);
 
 void __init prom_soc_init(struct ralink_soc_info *soc_info)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
-	unsigned char *name = NULL;
-	u32 n0;
-	u32 n1;
-	u32 rev;
-
 	/* Early detection of CMP support */
 	mips_cm_probe();
 	mips_cpc_probe();
@@ -154,27 +197,23 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		__sync();
 	}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-
-	if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
-		name = "MT7621";
+	if (mt7621_soc_valid())
 		soc_info->compatible = "mediatek,mt7621-soc";
-	} else {
-		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-	}
+	else
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n",
+				mt7621_get_soc_name0(),
+				mt7621_get_soc_name1());
 	ralink_soc = MT762X_SOC_MT7621AT;
-	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"MediaTek %s ver:%u eco:%u",
-		name,
-		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-		(rev & CHIP_REV_ECO_MASK));
+		mt7621_get_soc_id(),
+		mt7621_get_soc_ver(),
+		mt7621_get_soc_eco());
 
 	soc_info->mem_detect = mt7621_memory_detect;
 
-	soc_dev_init(soc_info, rev);
+	soc_info_ptr = soc_info;
 
 	if (!register_cps_smp_ops())
 		return;
diff --git linux-libre-6.1-gnu/arch/mips/ralink/of.c linux-libre-6.1.22-gnu/arch/mips/ralink/of.c
index ea8072acf8d9..4d06de77d92a 100644
--- linux-libre-6.1-gnu/arch/mips/ralink/of.c
+++ linux-libre-6.1.22-gnu/arch/mips/ralink/of.c
@@ -21,6 +21,7 @@
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include <asm/prom.h>
+#include <asm/mach-ralink/ralink_regs.h>
 
 #include "common.h"
 
@@ -63,7 +64,7 @@ void __init plat_mem_setup(void)
 	dtb = get_fdt();
 	__dt_setup_arch(dtb);
 
-	if (!early_init_dt_scan_memory())
+	if (early_init_dt_scan_memory())
 		return;
 
 	if (soc_info.mem_detect)
@@ -81,7 +82,8 @@ static int __init plat_of_setup(void)
 	__dt_register_buses(soc_info.compatible, "palmbus");
 
 	/* make sure that the reset controller is setup early */
-	ralink_rst_init();
+	if (ralink_soc != MT762X_SOC_MT7621AT)
+		ralink_rst_init();
 
 	return 0;
 }
diff --git linux-libre-6.1-gnu/arch/parisc/include/asm/pgtable.h linux-libre-6.1.22-gnu/arch/parisc/include/asm/pgtable.h
index ecd028854469..68ae77069d23 100644
--- linux-libre-6.1-gnu/arch/parisc/include/asm/pgtable.h
+++ linux-libre-6.1.22-gnu/arch/parisc/include/asm/pgtable.h
@@ -166,8 +166,8 @@ extern void __update_cache(pte_t pte);
 
 /* This calculates the number of initial pages we need for the initial
  * page tables */
-#if (KERNEL_INITIAL_ORDER) >= (PMD_SHIFT)
-# define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT))
+#if (KERNEL_INITIAL_ORDER) >= (PLD_SHIFT + BITS_PER_PTE)
+# define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PLD_SHIFT - BITS_PER_PTE))
 #else
 # define PT_INITIAL	(1)  /* all initial PTEs fit into one page */
 #endif
diff --git linux-libre-6.1-gnu/arch/parisc/include/uapi/asm/mman.h linux-libre-6.1.22-gnu/arch/parisc/include/uapi/asm/mman.h
index 22133a6a506e..68c44f99bc93 100644
--- linux-libre-6.1-gnu/arch/parisc/include/uapi/asm/mman.h
+++ linux-libre-6.1.22-gnu/arch/parisc/include/uapi/asm/mman.h
@@ -49,6 +49,19 @@
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE 15		/* Not worth backing with hugepages */
+
+#define MADV_DONTDUMP   16		/* Explicity exclude from the core dump,
+					   overrides the coredump filter bits */
+#define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
+
+#define MADV_WIPEONFORK 18		/* Zero memory on fork, child only */
+#define MADV_KEEPONFORK 19		/* Undo MADV_WIPEONFORK */
+
 #define MADV_COLD	20		/* deactivate these pages */
 #define MADV_PAGEOUT	21		/* reclaim these pages */
 
@@ -57,27 +70,13 @@
 
 #define MADV_DONTNEED_LOCKED	24	/* like DONTNEED, but drop locked pages too */
 
-#define MADV_MERGEABLE   65		/* KSM may merge identical pages */
-#define MADV_UNMERGEABLE 66		/* KSM may not merge identical pages */
-
-#define MADV_HUGEPAGE	67		/* Worth backing with hugepages */
-#define MADV_NOHUGEPAGE	68		/* Not worth backing with hugepages */
-
-#define MADV_DONTDUMP   69		/* Explicity exclude from the core dump,
-					   overrides the coredump filter bits */
-#define MADV_DODUMP	70		/* Clear the MADV_NODUMP flag */
-
-#define MADV_WIPEONFORK 71		/* Zero memory on fork, child only */
-#define MADV_KEEPONFORK 72		/* Undo MADV_WIPEONFORK */
-
-#define MADV_COLLAPSE	73		/* Synchronous hugepage collapse */
+#define MADV_COLLAPSE	25		/* Synchronous hugepage collapse */
 
 #define MADV_HWPOISON     100		/* poison a page for testing */
 #define MADV_SOFT_OFFLINE 101		/* soft offline page for testing */
 
 /* compatibility flags */
 #define MAP_FILE	0
-#define MAP_VARIABLE	0
 
 #define PKEY_DISABLE_ACCESS	0x1
 #define PKEY_DISABLE_WRITE	0x2
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/firmware.c linux-libre-6.1.22-gnu/arch/parisc/kernel/firmware.c
index 6a7e315bcc2e..bd325f2b5349 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/firmware.c
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/firmware.c
@@ -1288,9 +1288,8 @@ void pdc_io_reset_devices(void)
 
 #endif /* defined(BOOTLOADER) */
 
-/* locked by pdc_console_lock */
-static int __attribute__((aligned(8)))   iodc_retbuf[32];
-static char __attribute__((aligned(64))) iodc_dbuf[4096];
+/* locked by pdc_lock */
+static char iodc_dbuf[4096] __page_aligned_bss;
 
 /**
  * pdc_iodc_print - Console print using IODC.
@@ -1304,15 +1303,19 @@ static char __attribute__((aligned(64))) iodc_dbuf[4096];
  */
 int pdc_iodc_print(const unsigned char *str, unsigned count)
 {
-	unsigned int i;
+	unsigned int i, found = 0;
 	unsigned long flags;
 
+	count = min_t(unsigned int, count, sizeof(iodc_dbuf));
+
+	spin_lock_irqsave(&pdc_lock, flags);
 	for (i = 0; i < count;) {
 		switch(str[i]) {
 		case '\n':
 			iodc_dbuf[i+0] = '\r';
 			iodc_dbuf[i+1] = '\n';
 			i += 2;
+			found = 1;
 			goto print;
 		default:
 			iodc_dbuf[i] = str[i];
@@ -1322,14 +1325,13 @@ int pdc_iodc_print(const unsigned char *str, unsigned count)
 	}
 
 print:
-        spin_lock_irqsave(&pdc_lock, flags);
-        real32_call(PAGE0->mem_cons.iodc_io,
-                    (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
-                    PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
-                    __pa(iodc_retbuf), 0, __pa(iodc_dbuf), i, 0);
-        spin_unlock_irqrestore(&pdc_lock, flags);
+	real32_call(PAGE0->mem_cons.iodc_io,
+		(unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
+		PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
+		__pa(pdc_result), 0, __pa(iodc_dbuf), i, 0);
+	spin_unlock_irqrestore(&pdc_lock, flags);
 
-	return i;
+	return i - found;
 }
 
 #if !defined(BOOTLOADER)
@@ -1354,10 +1356,11 @@ int pdc_iodc_getc(void)
 	real32_call(PAGE0->mem_kbd.iodc_io,
 		    (unsigned long)PAGE0->mem_kbd.hpa, ENTRY_IO_CIN,
 		    PAGE0->mem_kbd.spa, __pa(PAGE0->mem_kbd.dp.layers), 
-		    __pa(iodc_retbuf), 0, __pa(iodc_dbuf), 1, 0);
+		    __pa(pdc_result), 0, __pa(iodc_dbuf), 1, 0);
 
 	ch = *iodc_dbuf;
-	status = *iodc_retbuf;
+	/* like convert_to_wide() but for first return value only: */
+	status = *(int *)&pdc_result;
 	spin_unlock_irqrestore(&pdc_lock, flags);
 
 	if (status == 0)
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/kgdb.c linux-libre-6.1.22-gnu/arch/parisc/kernel/kgdb.c
index ab7620f695be..b16fa9bac5f4 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/kgdb.c
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/kgdb.c
@@ -208,23 +208,3 @@ int kgdb_arch_handle_exception(int trap, int signo,
 	}
 	return -1;
 }
-
-/* KGDB console driver which uses PDC to read chars from keyboard */
-
-static void kgdb_pdc_write_char(u8 chr)
-{
-	/* no need to print char. kgdb will do it. */
-}
-
-static struct kgdb_io kgdb_pdc_io_ops = {
-	.name		= "kgdb_pdc",
-	.read_char	= pdc_iodc_getc,
-	.write_char	= kgdb_pdc_write_char,
-};
-
-static int __init kgdb_pdc_init(void)
-{
-	kgdb_register_io_module(&kgdb_pdc_io_ops);
-	return 0;
-}
-early_initcall(kgdb_pdc_init);
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/pdc_cons.c linux-libre-6.1.22-gnu/arch/parisc/kernel/pdc_cons.c
index 7d0989f523d0..cf3bf8232374 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/pdc_cons.c
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/pdc_cons.c
@@ -12,37 +12,27 @@
 #include <asm/page.h>		/* for PAGE0 */
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
-static DEFINE_SPINLOCK(pdc_console_lock);
-
 static void pdc_console_write(struct console *co, const char *s, unsigned count)
 {
 	int i = 0;
-	unsigned long flags;
 
-	spin_lock_irqsave(&pdc_console_lock, flags);
 	do {
 		i += pdc_iodc_print(s + i, count - i);
 	} while (i < count);
-	spin_unlock_irqrestore(&pdc_console_lock, flags);
 }
 
 #ifdef CONFIG_KGDB
 static int kgdb_pdc_read_char(void)
 {
-	int c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pdc_console_lock, flags);
-	c = pdc_iodc_getc();
-	spin_unlock_irqrestore(&pdc_console_lock, flags);
+	int c = pdc_iodc_getc();
 
 	return (c <= 0) ? NO_POLL_CHAR : c;
 }
 
 static void kgdb_pdc_write_char(u8 chr)
 {
-	if (PAGE0->mem_cons.cl_class != CL_DUPLEX)
-		pdc_console_write(NULL, &chr, 1);
+	/* no need to print char as it's shown on standard console */
+	/* pdc_iodc_print(&chr, 1); */
 }
 
 static struct kgdb_io kgdb_pdc_io_ops = {
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/ptrace.c linux-libre-6.1.22-gnu/arch/parisc/kernel/ptrace.c
index 96ef6a6b66e5..9af11abeee4f 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/ptrace.c
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/ptrace.c
@@ -126,6 +126,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	unsigned long tmp;
 	long ret = -EIO;
 
+	unsigned long user_regs_struct_size = sizeof(struct user_regs_struct);
+#ifdef CONFIG_64BIT
+	if (is_compat_task())
+		user_regs_struct_size /= 2;
+#endif
+
 	switch (request) {
 
 	/* Read the word at location addr in the USER area.  For ptraced
@@ -166,7 +172,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		     addr >= sizeof(struct pt_regs))
 			break;
 		if (addr == PT_IAOQ0 || addr == PT_IAOQ1) {
-			data |= 3; /* ensure userspace privilege */
+			data |= PRIV_USER; /* ensure userspace privilege */
 		}
 		if ((addr >= PT_GR1 && addr <= PT_GR31) ||
 				addr == PT_IAOQ0 || addr == PT_IAOQ1 ||
@@ -181,14 +187,14 @@ long arch_ptrace(struct task_struct *child, long request,
 		return copy_regset_to_user(child,
 					   task_user_regset_view(current),
 					   REGSET_GENERAL,
-					   0, sizeof(struct user_regs_struct),
+					   0, user_regs_struct_size,
 					   datap);
 
 	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
 		return copy_regset_from_user(child,
 					     task_user_regset_view(current),
 					     REGSET_GENERAL,
-					     0, sizeof(struct user_regs_struct),
+					     0, user_regs_struct_size,
 					     datap);
 
 	case PTRACE_GETFPREGS:	/* Get the child FPU state. */
@@ -285,7 +291,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			if (addr >= sizeof(struct pt_regs))
 				break;
 			if (addr == PT_IAOQ0+4 || addr == PT_IAOQ1+4) {
-				data |= 3; /* ensure userspace privilege */
+				data |= PRIV_USER; /* ensure userspace privilege */
 			}
 			if (addr >= PT_FR0 && addr <= PT_FR31 + 4) {
 				/* Special case, fp regs are 64 bits anyway */
@@ -302,6 +308,11 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			}
 		}
 		break;
+	case PTRACE_GETREGS:
+	case PTRACE_SETREGS:
+	case PTRACE_GETFPREGS:
+	case PTRACE_SETFPREGS:
+		return arch_ptrace(child, request, addr, data);
 
 	default:
 		ret = compat_ptrace_request(child, request, addr, data);
@@ -483,7 +494,7 @@ static void set_reg(struct pt_regs *regs, int num, unsigned long val)
 	case RI(iaoq[0]):
 	case RI(iaoq[1]):
 			/* set 2 lowest bits to ensure userspace privilege: */
-			regs->iaoq[num - RI(iaoq[0])] = val | 3;
+			regs->iaoq[num - RI(iaoq[0])] = val | PRIV_USER;
 			return;
 	case RI(sar):	regs->sar = val;
 			return;
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/sys_parisc.c linux-libre-6.1.22-gnu/arch/parisc/kernel/sys_parisc.c
index 848b0702005d..09a34b07f02e 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/sys_parisc.c
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/sys_parisc.c
@@ -465,3 +465,31 @@ asmlinkage long parisc_inotify_init1(int flags)
 	flags = FIX_O_NONBLOCK(flags);
 	return sys_inotify_init1(flags);
 }
+
+/*
+ * madvise() wrapper
+ *
+ * Up to kernel v6.1 parisc has different values than all other
+ * platforms for the MADV_xxx flags listed below.
+ * To keep binary compatibility with existing userspace programs
+ * translate the former values to the new values.
+ *
+ * XXX: Remove this wrapper in year 2025 (or later)
+ */
+
+asmlinkage notrace long parisc_madvise(unsigned long start, size_t len_in, int behavior)
+{
+	switch (behavior) {
+	case 65: behavior = MADV_MERGEABLE;	break;
+	case 66: behavior = MADV_UNMERGEABLE;	break;
+	case 67: behavior = MADV_HUGEPAGE;	break;
+	case 68: behavior = MADV_NOHUGEPAGE;	break;
+	case 69: behavior = MADV_DONTDUMP;	break;
+	case 70: behavior = MADV_DODUMP;	break;
+	case 71: behavior = MADV_WIPEONFORK;	break;
+	case 72: behavior = MADV_KEEPONFORK;	break;
+	case 73: behavior = MADV_COLLAPSE;	break;
+	}
+
+	return sys_madvise(start, len_in, behavior);
+}
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/syscalls/syscall.tbl linux-libre-6.1.22-gnu/arch/parisc/kernel/syscalls/syscall.tbl
index 8a99c998da9b..0e42fceb2d5e 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/syscalls/syscall.tbl
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/syscalls/syscall.tbl
@@ -131,7 +131,7 @@
 116	common	sysinfo			sys_sysinfo			compat_sys_sysinfo
 117	common	shutdown		sys_shutdown
 118	common	fsync			sys_fsync
-119	common	madvise			sys_madvise
+119	common	madvise			parisc_madvise
 120	common	clone			sys_clone_wrapper
 121	common	setdomainname		sys_setdomainname
 122	common	sendfile		sys_sendfile			compat_sys_sendfile
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/vdso32/Makefile linux-libre-6.1.22-gnu/arch/parisc/kernel/vdso32/Makefile
index 85b1c6d261d1..4459a48d2303 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/vdso32/Makefile
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/vdso32/Makefile
@@ -26,7 +26,7 @@ $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so FORCE
 
 # Force dependency (incbin is bad)
 # link rule for the .so file, .lds has to be first
-$(obj)/vdso32.so: $(src)/vdso32.lds $(obj-vdso32) $(obj-cvdso32) $(VDSO_LIBGCC)
+$(obj)/vdso32.so: $(src)/vdso32.lds $(obj-vdso32) $(obj-cvdso32) $(VDSO_LIBGCC) FORCE
 	$(call if_changed,vdso32ld)
 
 # assembly rules for the .S files
@@ -38,7 +38,7 @@ $(obj-cvdso32): %.o: %.c FORCE
 
 # actual build commands
 quiet_cmd_vdso32ld = VDSO32L $@
-      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $^ -o $@
+      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $(filter-out FORCE, $^) -o $@
 quiet_cmd_vdso32as = VDSO32A $@
       cmd_vdso32as = $(CROSS32CC) $(a_flags) -c -o $@ $<
 quiet_cmd_vdso32cc = VDSO32C $@
diff --git linux-libre-6.1-gnu/arch/parisc/kernel/vdso64/Makefile linux-libre-6.1.22-gnu/arch/parisc/kernel/vdso64/Makefile
index a30f5ec5eb4b..f3d6045793f4 100644
--- linux-libre-6.1-gnu/arch/parisc/kernel/vdso64/Makefile
+++ linux-libre-6.1.22-gnu/arch/parisc/kernel/vdso64/Makefile
@@ -26,7 +26,7 @@ $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so FORCE
 
 # Force dependency (incbin is bad)
 # link rule for the .so file, .lds has to be first
-$(obj)/vdso64.so: $(src)/vdso64.lds $(obj-vdso64) $(VDSO_LIBGCC)
+$(obj)/vdso64.so: $(src)/vdso64.lds $(obj-vdso64) $(VDSO_LIBGCC) FORCE
 	$(call if_changed,vdso64ld)
 
 # assembly rules for the .S files
@@ -35,7 +35,7 @@ $(obj-vdso64): %.o: %.S FORCE
 
 # actual build commands
 quiet_cmd_vdso64ld = VDSO64L $@
-      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $(filter-out FORCE, $^) -o $@
 quiet_cmd_vdso64as = VDSO64A $@
       cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
 
diff --git linux-libre-6.1-gnu/arch/powerpc/Kconfig linux-libre-6.1.22-gnu/arch/powerpc/Kconfig
index 2ca5418457ed..2b1141645d9e 100644
--- linux-libre-6.1-gnu/arch/powerpc/Kconfig
+++ linux-libre-6.1.22-gnu/arch/powerpc/Kconfig
@@ -161,7 +161,6 @@ config PPC
 	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select ARCH_WANTS_MODULES_DATA_IN_VMALLOC	if PPC_BOOK3S_32 || PPC_8xx
-	select ARCH_WANTS_NO_INSTR
 	select ARCH_WEAK_RELEASE_ACQUIRE
 	select BINFMT_ELF
 	select BUILDTIME_TABLE_SORT
diff --git linux-libre-6.1-gnu/arch/powerpc/Makefile linux-libre-6.1.22-gnu/arch/powerpc/Makefile
index dc4cbf0a5ca9..894d48cd0492 100644
--- linux-libre-6.1-gnu/arch/powerpc/Makefile
+++ linux-libre-6.1.22-gnu/arch/powerpc/Makefile
@@ -90,7 +90,7 @@ aflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian
 
 ifeq ($(HAS_BIARCH),y)
 KBUILD_CFLAGS	+= -m$(BITS)
-KBUILD_AFLAGS	+= -m$(BITS) -Wl,-a$(BITS)
+KBUILD_AFLAGS	+= -m$(BITS)
 KBUILD_LDFLAGS	+= -m elf$(BITS)$(LDEMULATION)
 endif
 
@@ -146,19 +146,6 @@ CFLAGS-$(CONFIG_PPC32)	+= $(call cc-option, $(MULTIPLEWORD))
 
 CFLAGS-$(CONFIG_PPC32)	+= $(call cc-option,-mno-readonly-in-sdata)
 
-ifdef CONFIG_PPC_BOOK3S_64
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power8
-else
-CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power