diff --git linux-libre-6.1-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-6.1.56-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 8e2c2c405db2..3becc9a82bdf 100644
--- linux-libre-6.1-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-6.1.56-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -22,6 +22,7 @@ Date:           Oct 25, 2019
 KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The largest number of work descriptors in a batch.
+                It's not visible when the device does not support batch.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
 Date:           Oct 25, 2019
@@ -49,6 +50,8 @@ Description:    The total number of read buffers supported by this device.
 		The read buffers represent resources within the DSA
 		implementation, and these resources are allocated by engines to
 		support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
 Date:           Oct 25, 2019
@@ -122,6 +125,8 @@ Contact:        dmaengine@vger.kernel.org
 Description:    The maximum number of read buffers that may be in use at
 		one time by operations that access low bandwidth memory in the
 		device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
 Date:		Aug 28, 2020
@@ -205,6 +210,7 @@ KernelVersion:	5.10.0
 Contact:	dmaengine@vger.kernel.org
 Description:	The max batch size for this workqueue. Cannot exceed device
 		max batch size. Configurable parameter.
+		It's not visible when the device does not support batch.
 
 What:		/sys/bus/dsa/devices/wq<m>.<n>/ats_disable
 Date:		Nov 13, 2020
@@ -250,6 +256,8 @@ KernelVersion:	5.17.0
 Contact:	dmaengine@vger.kernel.org
 Description:	Enable the use of global read buffer limit for the group. See DSA
 		spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
 Date:		Dec 10, 2021
@@ -258,6 +266,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates max number of read buffers that may be in use at one time
 		by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
 		Buffers Allowed.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
 Date:		Dec 10, 2021
@@ -266,6 +276,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates the number of Read Buffers reserved for the use of
 		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
 		Reserved.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
 Date:		Sept 14, 2022
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc linux-libre-6.1.56-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 611b23e6488d..feb3f2cc0c16 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -52,7 +52,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo
index 531fe9d6b40a..c7393b4dd2d8 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo
@@ -5,6 +5,6 @@ Description:
 		Indicates whether or not this SBE device has experienced a
 		timeout; i.e. the SBE did not respond within the time allotted
 		by the driver. A value of 1 indicates that a timeout has
-		ocurred and no transfers have completed since the timeout. A
-		value of 0 indicates that no timeout has ocurred, or if one
-		has, more recent transfers have completed successful.
+		occurred and no transfers have completed since the timeout. A
+		value of 0 indicates that no timeout has occurred, or if one
+		has, more recent transfers have completed successfully.
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..e9ef69aef20b 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index f54867cadb0f..13c01b641dc7 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -513,17 +513,18 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpuX.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/retbleed
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
-		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
-		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-driver-chromeos-acpi linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
index c308926e1568..7c8e129fc100 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
@@ -134,4 +134,4 @@ KernelVersion:	5.19
 Description:
 		Returns the verified boot data block shared between the
 		firmware verification step and the kernel verification step
-		(binary).
+		(hex dump).
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-driver-eud linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-driver-eud
index 83f3872182a4..2bab0db2d2f0 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-driver-eud
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-driver-eud
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/eud/.../enable
+What:		/sys/bus/platform/drivers/qcom_eud/.../enable
 Date:           February 2022
 Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
 Description:
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-module linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-module
index 08886367d047..62addab47d0c 100644
--- linux-libre-6.1-gnu/Documentation/ABI/testing/sysfs-module
+++ linux-libre-6.1.56-gnu/Documentation/ABI/testing/sysfs-module
@@ -60,3 +60,14 @@ Description:	Module taint flags:
 			C   staging driver module
 			E   unsigned module
 			==  =====================
+
+What:		/sys/module/grant_table/parameters/free_per_iteration
+Date:		July 2023
+KernelVersion:	6.5 but backported to all supported stable branches
+Contact:	Xen developer discussion <xen-devel@lists.xenproject.org>
+Description:	Read and write number of grant entries to attempt to free per iteration.
+
+		Note: Future versions of Xen and Linux may provide a better
+		interface for controlling the rate of deferred grant reclaim
+		or may not need it at all.
+Users:		Qubes OS (https://www.qubes-os.org)
diff --git linux-libre-6.1-gnu/Documentation/accounting/psi.rst linux-libre-6.1.56-gnu/Documentation/accounting/psi.rst
index 5e40b3f437f9..df6062eb3abb 100644
--- linux-libre-6.1-gnu/Documentation/accounting/psi.rst
+++ linux-libre-6.1.56-gnu/Documentation/accounting/psi.rst
@@ -105,6 +105,10 @@ prevent overly frequent polling. Max limit is chosen as a high enough number
 after which monitors are most likely not needed and psi averages can be used
 instead.
 
+Unprivileged users can also create monitors, with the only limitation that the
+window size must be a multiple of 2s, in order to prevent excessive resource
+usage.
+
 When activated, psi monitor stays active for at least the duration of one
 tracking window to avoid repeated activations/deactivations when system is
 bouncing in and out of the stall state.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
index 5b86245450bd..40164f2881e1 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -86,11 +86,18 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
- memory.kmem.limit_in_bytes          This knob is deprecated and writing to
-                                     it will return -ENOTSUPP.
+ memory.kmem.limit_in_bytes          Deprecated knob to set and read the kernel
+                                     memory hard limit. Kernel hard limit is not
+                                     supported since 5.16. Writing any value to
+                                     do file will not have any effect same as if
+                                     nokmem kernel parameter was specified.
+                                     Kernel memory is still charged and reported
+                                     by memory.kmem.usage_in_bytes.
  memory.kmem.usage_in_bytes          show current kernel memory allocation
  memory.kmem.failcnt                 show the number of kernel memory usage
 				     hits limits
@@ -716,8 +723,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/device-mapper/dm-init.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
index e5242ff17e9b..981d6a907699 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/device-mapper/dm-init.rst
@@ -123,3 +123,11 @@ Other examples (per target):
     0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
     fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
     51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
+
+For setups using device-mapper on top of asynchronously probed block
+devices (MMC, USB, ..), it may be necessary to tell dm-init to
+explicitly wait for them to become available before setting up the
+device-mapper tables. This can be done with the "dm-mod.waitfor="
+module parameter, which takes a list of devices to wait for::
+
+  dm-mod.waitfor=<device1>[,..,<deviceN>]
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
new file mode 100644
index 000000000000..ec6e9f5bcf9e
--- /dev/null
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
@@ -0,0 +1,92 @@
+
+.. SPDX-License-Identifier: GPL-2.0
+
+Cross-Thread Return Address Predictions
+=======================================
+
+Certain AMD and Hygon processors are subject to a cross-thread return address
+predictions vulnerability. When running in SMT mode and one sibling thread
+transitions out of C0 state, the other sibling thread could use return target
+predictions from the sibling thread that transitioned out of C0.
+
+The Spectre v2 mitigations protect the Linux kernel, as it fills the return
+address prediction entries with safe targets when context switching to the idle
+thread. However, KVM does allow a VMM to prevent exiting guest mode when
+transitioning out of C0. This could result in a guest-controlled return target
+being consumed by the sibling thread.
+
+Affected processors
+-------------------
+
+The following CPUs are vulnerable:
+
+    - AMD Family 17h processors
+    - Hygon Family 18h processors
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =======================================
+   CVE-2022-27672  Cross-Thread Return Address Predictions
+   ==============  =======================================
+
+Problem
+-------
+
+Affected SMT-capable processors support 1T and 2T modes of execution when SMT
+is enabled. In 2T mode, both threads in a core are executing code. For the
+processor core to enter 1T mode, it is required that one of the threads
+requests to transition out of the C0 state. This can be communicated with the
+HLT instruction or with an MWAIT instruction that requests non-C0.
+When the thread re-enters the C0 state, the processor transitions back
+to 2T mode, assuming the other thread is also still in C0 state.
+
+In affected processors, the return address predictor (RAP) is partitioned
+depending on the SMT mode. For instance, in 2T mode each thread uses a private
+16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon
+transition between 1T/2T mode, the RAP contents are not modified but the RAP
+pointers (which control the next return target to use for predictions) may
+change. This behavior may result in return targets from one SMT thread being
+used by RET predictions in the sibling thread following a 1T/2T switch. In
+particular, a RET instruction executed immediately after a transition to 1T may
+use a return target from the thread that just became idle. In theory, this
+could lead to information disclosure if the return targets used do not come
+from trustworthy code.
+
+Attack scenarios
+----------------
+
+An attack can be mounted on affected processors by performing a series of CALL
+instructions with targeted return locations and then transitioning out of C0
+state.
+
+Mitigation mechanism
+--------------------
+
+Before entering idle state, the kernel context switches to the idle thread. The
+context switch fills the RAP entries (referred to as the RSB in Linux) with safe
+targets by performing a sequence of CALL instructions.
+
+Prevent a guest VM from directly putting the processor into an idle state by
+intercepting HLT and MWAIT instructions.
+
+Both mitigations are required to fully address this issue.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Use existing Spectre v2 mitigations that will fill the RSB on context switch.
+
+Mitigation control for KVM - module parameter
+---------------------------------------------
+
+By default, the KVM hypervisor mitigates this issue by intercepting guest
+attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS
+capability to override those interceptions, but since this is not common, the
+mitigation that covers this path is not enabled by default.
+
+The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on
+using the boolean module parameter mitigate_smt_rsb, e.g.:
+        kvm.mitigate_smt_rsb=1
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/index.rst
index 4df436e7c417..6828102baaa7 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -18,3 +18,6 @@ are configurable at compile, boot or run time.
    core-scheduling.rst
    l1d_flush.rst
    processor_mmio_stale_data.rst
+   cross-thread-rsb.rst
+   gather_data_sampling.rst
+   srso
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index c4dcdb3d0d45..a39bbfe9526b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -479,8 +479,16 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks, including cross-thread branch target injections
+   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+   Legacy IBRS systems clear the IBRS bit on exit to userspace and
+   therefore explicitly enable STIBP for that
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -504,9 +512,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/srso.rst
new file mode 100644
index 000000000000..f79cb11b080f
--- /dev/null
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Speculative Return Stack Overflow (SRSO)
+========================================
+
+This is a mitigation for the speculative return stack overflow (SRSO)
+vulnerability found on AMD processors. The mechanism is by now the well
+known scenario of poisoning CPU functional units - the Branch Target
+Buffer (BTB) and Return Address Predictor (RAP) in this case - and then
+tricking the elevated privilege domain (the kernel) into leaking
+sensitive data.
+
+AMD CPUs predict RET instructions using a Return Address Predictor (aka
+Return Address Stack/Return Stack Buffer). In some cases, a non-architectural
+CALL instruction (i.e., an instruction predicted to be a CALL but is
+not actually a CALL) can create an entry in the RAP which may be used
+to predict the target of a subsequent RET instruction.
+
+The specific circumstances that lead to this varies by microarchitecture
+but the concern is that an attacker can mis-train the CPU BTB to predict
+non-architectural CALL instructions in kernel space and use this to
+control the speculative target of a subsequent kernel RET, potentially
+leading to information disclosure via a speculative side-channel.
+
+The issue is tracked under CVE-2023-20569.
+
+Affected processors
+-------------------
+
+AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older
+processors have not been investigated.
+
+System information and options
+------------------------------
+
+First of all, it is required that the latest microcode be loaded for
+mitigations to be effective.
+
+The sysfs file showing SRSO mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
+
+The possible values in this file are:
+
+ - 'Not affected'               The processor is not vulnerable
+
+ - 'Vulnerable: no microcode'   The processor is vulnerable, no
+                                microcode extending IBPB functionality
+                                to address the vulnerability has been
+                                applied.
+
+ - 'Mitigation: microcode'      Extended IBPB functionality microcode
+                                patch has been applied. It does not
+                                address User->Kernel and Guest->Host
+                                transitions protection but it does
+                                address User->User and VM->VM attack
+                                vectors.
+
+                                (spec_rstack_overflow=microcode)
+
+ - 'Mitigation: safe RET'       Software-only mitigation. It complements
+                                the extended IBPB microcode patch
+                                functionality by addressing User->Kernel
+                                and Guest->Host transitions protection.
+
+                                Selected by default or by
+                                spec_rstack_overflow=safe-ret
+
+ - 'Mitigation: IBPB'           Similar protection as "safe RET" above
+                                but employs an IBPB barrier on privilege
+                                domain crossings (User->Kernel,
+                                Guest->Host).
+
+                                (spec_rstack_overflow=ibpb)
+
+ - 'Mitigation: IBPB on VMEXIT' Mitigation addressing the cloud provider
+                                scenario - the Guest->Host transitions
+                                only.
+
+                                (spec_rstack_overflow=ibpb-vmexit)
+
+In order to exploit vulnerability, an attacker needs to:
+
+ - gain local access on the machine
+
+ - break kASLR
+
+ - find gadgets in the running kernel in order to use them in the exploit
+
+ - potentially create and pin an additional workload on the sibling
+   thread, depending on the microarchitecture (not necessary on fam 0x19)
+
+ - run the exploit
+
+Considering the performance implications of each mitigation type, the
+default one is 'Mitigation: safe RET' which should take care of most
+attack vectors, including the local User->Kernel one.
+
+As always, the user is advised to keep her/his system up-to-date by
+applying software updates regularly.
+
+The default setting will be reevaluated when needed and especially when
+new attack vectors appear.
+
+As one can surmise, 'Mitigation: safe RET' does come at the cost of some
+performance depending on the workload. If one trusts her/his userspace
+and does not want to suffer the performance impact, one can always
+disable the mitigation with spec_rstack_overflow=off.
+
+Similarly, 'Mitigation: IBPB' is another full mitigation type employing
+an indrect branch prediction barrier after having applied the required
+microcode patch for one's system. This mitigation comes also at
+a performance cost.
+
+Mitigation: safe RET
+--------------------
+
+The mitigation works by ensuring all RET instructions speculate to
+a controlled location, similar to how speculation is controlled in the
+retpoline sequence.  To accomplish this, the __x86_return_thunk forces
+the CPU to mispredict every function return using a 'safe return'
+sequence.
+
+To ensure the safety of this mitigation, the kernel must ensure that the
+safe return sequence is itself free from attacker interference.  In Zen3
+and Zen4, this is accomplished by creating a BTB alias between the
+untraining function srso_alias_untrain_ret() and the safe return
+function srso_alias_safe_ret() which results in evicting a potentially
+poisoned BTB entry and using that safe one for all function returns.
+
+In older Zen1 and Zen2, this is accomplished using a reinterpretation
+technique similar to Retbleed one: srso_untrain_ret() and
+srso_safe_ret().
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/kdump/gdbmacros.txt linux-libre-6.1.56-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.1.56-gnu/Documentation/admin-guide/kernel-parameters.txt
index 42af9ca0127e..31af352b4762 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -323,6 +323,7 @@
 				       option with care.
 			pgtbl_v1     - Use v1 page table for DMA-API (Default).
 			pgtbl_v2     - Use v2 page table for DMA-API.
+			irtcachedis  - Disable Interrupt Remapping Table (IRT) caching.
 
 	amd_iommu_dump=	[HW,X86-64]
 			Enable AMD IOMMU driver option to dump the ACPI table
@@ -1593,6 +1594,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:	Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -2300,7 +2321,13 @@
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
@@ -2312,7 +2339,13 @@
 			Provide an override to the HPET-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map HPET-ID decimal 0 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
@@ -2323,15 +2356,20 @@
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
 
 			For example, to map UART-HID:UID AMD0020:0 to
 			PCI segment 0x1 and PCI device ID 00:14.5,
 			write the parameter as:
-				ivrs_acpihid[0001:00:14.5]=AMD0020:0
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
 
-			By default, PCI segment is 0, and can be omitted.
-			For example, PCI device 00:14.5 write the parameter as:
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
@@ -3211,24 +3249,25 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
-					       if nokaslr then kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
-					       nobp=0 [S390]
-					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
-					       spec_store_bypass_disable=off [X86,PPC]
-					       ssbd=force-off [ARM64]
-					       nospectre_bhb [ARM64]
+				Equivalent to: if nokaslr then kpti=0 [ARM64]
+					       gather_data_sampling=off [X86]
+					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
-					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
-					       srbds=off [X86,INTEL]
+					       mmio_stale_data=off [X86]
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
-					       mmio_stale_data=off [X86]
+					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_bhb [ARM64]
+					       nospectre_v1 [X86,PPC]
+					       nospectre_v2 [X86,PPC,S390,ARM64]
 					       retbleed=off [X86]
+					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_v2_user=off [X86]
+					       srbds=off [X86,INTEL]
+					       ssbd=force-off [ARM64]
+					       tsx_async_abort=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -5747,6 +5786,17 @@
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
 
+	spec_rstack_overflow=
+			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+
+			off		- Disable mitigation
+			microcode	- Enable microcode mitigation only
+			safe-ret	- Enable sw-only safe RET mitigation (default)
+			ibpb		- Enable mitigation by issuing IBPB on
+					  kernel entry
+			ibpb-vmexit	- Issue IBPB only on VMEXIT
+					  (cloud-specific mitigation)
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@@ -6114,10 +6164,6 @@
 			-1: disable all critical trip points in all thermal zones
 			<degrees C>: override all critical trip points
 
-	thermal.nocrt=	[HW,ACPI]
-			Set to disable actions on ACPI thermal zone
-			critical and hot trip points.
-
 	thermal.off=	[HW,ACPI]
 			1: disable ACPI thermal control
 
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
index 294ebbdb22af..bbe66480ff85 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -15,10 +15,10 @@ HiSilicon PCIe PMU driver
 The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe
 Core id.::
 
-  /sys/bus/event_source/hisi_pcie<sicl>_<core>
+  /sys/bus/event_source/hisi_pcie<sicl>_core<core>
 
 PMU driver provides description of available events and filter options in sysfs,
-see /sys/bus/event_source/devices/hisi_pcie<sicl>_<core>.
+see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>.
 
 The "format" directory describes all formats of the config (events) and config1
 (filter options) fields of the perf_event_attr structure. The "events" directory
@@ -33,13 +33,13 @@ monitored by PMU.
 Example usage of perf::
 
   $# perf list
-  hisi_pcie0_0/rx_mwr_latency/ [kernel PMU event]
-  hisi_pcie0_0/rx_mwr_cnt/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
   ------------------------------------------
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency/
-  $# perf stat -e hisi_pcie0_0/rx_mwr_cnt/
-  $# perf stat -g -e hisi_pcie0_0/rx_mwr_latency/ -e hisi_pcie0_0/rx_mwr_cnt/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported for PCIe PMU.
@@ -64,7 +64,7 @@ bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency,port=0x1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
 
 -bdf
 
@@ -76,7 +76,7 @@ For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,bdf=0x3900/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
 
 2. Trigger filter
 Event statistics start when the first time TLP length is greater/smaller
@@ -90,7 +90,7 @@ means start when TLP length < condition.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
 
 3. Threshold filter
 Counter counts when TLP length within the specified range. You can set the
@@ -103,4 +103,4 @@ when TLP length < threshold.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/security-bugs.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/security-bugs.rst
index 82e29837d589..5a6993795bd2 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/security-bugs.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/security-bugs.rst
@@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-6.1-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.1.56-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 98d1b198b2b4..b3588fff1ec0 100644
--- linux-libre-6.1-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.1.56-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -667,6 +667,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -1314,6 +1323,29 @@ watchdog work to be queued by the watchdog timer function, otherwise the NMI
 watchdog — if enabled — can detect a hard lockup condition.
 
 
+split_lock_mitigate (x86 only)
+==============================
+
+On x86, each "split lock" imposes a system-wide performance penalty. On larger
+systems, large numbers of split locks from unprivileged users can result in
+denials of service to well-behaved and potentially more important users.
+
+The kernel mitigates these bad users by detecting split locks and imposing
+penalties: forcing them to wait and only allowing one core to execute split
+locks at a time.
+
+These mitigations can make those bad applications unbearably slow. Setting
+split_lock_mitigate=0 may restore some application performance, but will also
+increase system exposure to denial of service attacks from split lock users.
+
+= ===================================================================
+0 Disable the mitigation mode - just warns the split lock on kernel log
+  and exposes the system to denials of service from the split lockers.
+1 Enable the mitigation mode (this is the default) - penalizes the split
+  lockers with intentional performance degradation.
+= ===================================================================
+
+
 stack_erasing
 =============
 
@@ -1500,6 +1532,16 @@ entry will default to 2 instead of 0.
 2 Unprivileged calls to ``bpf()`` are disabled
 = =============================================================
 
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog
 ========
 
diff --git linux-libre-6.1-gnu/Documentation/arm64/silicon-errata.rst linux-libre-6.1.56-gnu/Documentation/arm64/silicon-errata.rst
index 808ade4cc008..9000640f7f7a 100644
--- linux-libre-6.1-gnu/Documentation/arm64/silicon-errata.rst
+++ linux-libre-6.1.56-gnu/Documentation/arm64/silicon-errata.rst
@@ -52,6 +52,9 @@ stable kernels.
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
@@ -138,6 +141,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-600         | #1076982,1209401| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | MMU-700         | #2268618,2812531| N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -170,6 +177,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
 +----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -184,6 +193,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
+|                | Hip09 SMMU PMCG |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.1-gnu/Documentation/block/inline-encryption.rst linux-libre-6.1.56-gnu/Documentation/block/inline-encryption.rst
index 4d151fbe2058..f9bf18ea6509 100644
--- linux-libre-6.1-gnu/Documentation/block/inline-encryption.rst
+++ linux-libre-6.1.56-gnu/Documentation/block/inline-encryption.rst
@@ -142,7 +142,7 @@ Therefore, we also introduce *blk-crypto-fallback*, which is an implementation
 of inline encryption using the kernel crypto API.  blk-crypto-fallback is built
 into the block layer, so it works on any block device without any special setup.
 Essentially, when a bio with an encryption context is submitted to a
-request_queue that doesn't support that encryption context, the block layer will
+block_device that doesn't support that encryption context, the block layer will
 handle en/decryption of the bio using blk-crypto-fallback.
 
 For encryption, the data cannot be encrypted in-place, as callers usually rely
@@ -187,7 +187,7 @@ API presented to users of the block layer
 
 ``blk_crypto_config_supported()`` allows users to check ahead of time whether
 inline encryption with particular crypto settings will work on a particular
-request_queue -- either via hardware or via blk-crypto-fallback.  This function
+block_device -- either via hardware or via blk-crypto-fallback.  This function
 takes in a ``struct blk_crypto_config`` which is like blk_crypto_key, but omits
 the actual bytes of the key and instead just contains the algorithm, data unit
 size, etc.  This function can be useful if blk-crypto-fallback is disabled.
@@ -195,7 +195,7 @@ size, etc.  This function can be useful if blk-crypto-fallback is disabled.
 ``blk_crypto_init_key()`` allows users to initialize a blk_crypto_key.
 
 Users must call ``blk_crypto_start_using_key()`` before actually starting to use
-a blk_crypto_key on a request_queue (even if ``blk_crypto_config_supported()``
+a blk_crypto_key on a block_device (even if ``blk_crypto_config_supported()``
 was called earlier).  This is needed to initialize blk-crypto-fallback if it
 will be needed.  This must not be called from the data path, as this may have to
 allocate resources, which may deadlock in that case.
@@ -207,7 +207,7 @@ for en/decryption.  Users don't need to worry about freeing the bio_crypt_ctx
 later, as that happens automatically when the bio is freed or reset.
 
 Finally, when done using inline encryption with a blk_crypto_key on a
-request_queue, users must call ``blk_crypto_evict_key()``.  This ensures that
+block_device, users must call ``blk_crypto_evict_key()``.  This ensures that
 the key is evicted from all keyslots it may be programmed into and unlinked from
 any kernel data structures it may be linked into.
 
@@ -221,9 +221,9 @@ as follows:
 5. ``blk_crypto_evict_key()`` (after all I/O has completed)
 6. Zeroize the blk_crypto_key (this has no dedicated function)
 
-If a blk_crypto_key is being used on multiple request_queues, then
+If a blk_crypto_key is being used on multiple block_devices, then
 ``blk_crypto_config_supported()`` (if used), ``blk_crypto_start_using_key()``,
-and ``blk_crypto_evict_key()`` must be called on each request_queue.
+and ``blk_crypto_evict_key()`` must be called on each block_device.
 
 API presented to device drivers
 ===============================
diff --git linux-libre-6.1-gnu/Documentation/bpf/instruction-set.rst linux-libre-6.1.56-gnu/Documentation/bpf/instruction-set.rst
index 5d798437dad4..3ba6475cfbfc 100644
--- linux-libre-6.1-gnu/Documentation/bpf/instruction-set.rst
+++ linux-libre-6.1.56-gnu/Documentation/bpf/instruction-set.rst
@@ -99,19 +99,26 @@ code      value  description
 BPF_ADD   0x00   dst += src
 BPF_SUB   0x10   dst -= src
 BPF_MUL   0x20   dst \*= src
-BPF_DIV   0x30   dst /= src
+BPF_DIV   0x30   dst = (src != 0) ? (dst / src) : 0
 BPF_OR    0x40   dst \|= src
 BPF_AND   0x50   dst &= src
 BPF_LSH   0x60   dst <<= src
 BPF_RSH   0x70   dst >>= src
 BPF_NEG   0x80   dst = ~src
-BPF_MOD   0x90   dst %= src
+BPF_MOD   0x90   dst = (src != 0) ? (dst % src) : dst
 BPF_XOR   0xa0   dst ^= src
 BPF_MOV   0xb0   dst = src
 BPF_ARSH  0xc0   sign extending shift right
 BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 ========  =====  ==========================================================
 
+Underflow and overflow are allowed during arithmetic operations, meaning
+the 64-bit or 32-bit value will wrap. If eBPF program execution would
+result in division by zero, the destination register is instead set to zero.
+If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
+the destination register is unchanged whereas for ``BPF_ALU`` the upper
+32 bits of the destination register are zeroed.
+
 ``BPF_ADD | BPF_X | BPF_ALU`` means::
 
   dst_reg = (u32) dst_reg + (u32) src_reg;
@@ -128,6 +135,11 @@ BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
 
   src_reg = src_reg ^ imm32
 
+Also note that the division and modulo operations are unsigned. Thus, for
+``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
+for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
+interpreted as an unsigned 64-bit value. There are no instructions for
+signed division or modulo.
 
 Byte swap instructions
 ~~~~~~~~~~~~~~~~~~~~~~
diff --git linux-libre-6.1-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-6.1.56-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17a..895285c037c7 100644
--- linux-libre-6.1-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-6.1.56-gnu/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
index 9b31f864e071..71364c6081ff 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   iommus:
-    maxItems: 1
+    maxItems: 4
 
   power-domains:
     maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 229af98b1d30..7cd88bc3a67d 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -16,8 +16,6 @@ description: |
   reads required input clock frequencies from the devicetree and acts as clock
   provider for all clock consumers of PS clocks.
 
-select: false
-
 properties:
   compatible:
     const: xlnx,versal-clk
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 63fb02014a56..117e3db43f84 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -32,7 +32,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8186-disp-ccorr
-          - const: mediatek,mt8183-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
 
   reg:
     maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 3b609c19e0bc..2fa1759e74d9 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -32,7 +32,7 @@ properties:
       - description: Display byte clock
       - description: Display byte interface clock
       - description: Display pixel clock
-      - description: Display escape clock
+      - description: Display core clock
       - description: Display AHB clock
       - description: Display AXI clock
 
@@ -65,6 +65,18 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     maxItems: 2
     description: |
@@ -134,8 +146,6 @@ required:
   - phy-names
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
 additionalProperties: false
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index d9ad8b659f58..3ec466c3ab38 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -69,7 +69,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 1342d74ecfe0..0a7b5f110d88 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -38,7 +38,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 3d8540a06fe2..2f1fd140c87d 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -34,6 +34,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
index 128960545640..55800fb0221d 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -23,6 +23,7 @@ properties:
 
   connector:
     $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
index c46378efc123..92e899905ef8 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,i2c-r9a09g011  # RZ/V2M
+          - renesas,r9a09g011-i2c  # RZ/V2M
       - const: renesas,rzv2m-i2c
 
   reg:
@@ -66,7 +66,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@a4030000 {
-        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
         reg = <0xa4030000 0x80>;
         interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
                      <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
index c115e2e99bd9..4a7b1385fdc7 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -86,7 +86,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 02e605fac408..9ddba7f2e7aa 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -473,9 +473,6 @@ patternProperties:
               Specifies whether the event is to be interpreted as a key (1)
               or a switch (5).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     dependencies:
@@ -501,7 +498,7 @@ patternProperties:
 
       azoteq,slider-size:
         $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
+        minimum: 1
         maximum: 65535
         description:
           Specifies the slider's one-dimensional resolution, equal to the
@@ -575,9 +572,9 @@ patternProperties:
           linux,code: true
 
           azoteq,gesture-max-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 1020
+            maximum: 4080
             description:
               Specifies the length of time (in ms) within which a tap, swipe
               or flick gesture must be completed in order to be acknowledged
@@ -585,9 +582,9 @@ patternProperties:
               gesture applies to all remaining swipe or flick gestures.
 
           azoteq,gesture-min-ms:
-            multipleOf: 4
+            multipleOf: 16
             minimum: 0
-            maximum: 124
+            maximum: 496
             description:
               Specifies the length of time (in ms) for which a tap gesture must
               be held in order to be acknowledged by the device.
@@ -620,9 +617,6 @@ patternProperties:
               GPIO, they must all be of the same type (proximity, touch or
               slider gesture).
 
-        required:
-          - linux,code
-
         additionalProperties: false
 
     required:
@@ -693,6 +687,7 @@ allOf:
           properties:
             azoteq,slider-size:
               multipleOf: 16
+              minimum: 16
               maximum: 4080
 
             azoteq,top-speed:
@@ -935,14 +930,14 @@ examples:
 
                             event-tap {
                                     linux,code = <KEY_PLAYPAUSE>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-min-ms = <24>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
                             };
 
                             event-flick-pos {
                                     linux,code = <KEY_NEXTSONG>;
-                                    azoteq,gesture-max-ms = <600>;
-                                    azoteq,gesture-dist = <816>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
                             };
 
                             event-flick-neg {
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 6a3e3ede1ede..777f2da52f1e 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -98,6 +98,10 @@ properties:
     type: object
     $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
 
+  pwm:
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
 patternProperties:
   "^adc@[0-9a-f]+$":
     type: object
@@ -123,10 +127,6 @@ patternProperties:
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
 
-  "pwm@[0-9a-f]+$":
-    type: object
-    $ref: /schemas/leds/leds-qcom-lpg.yaml#
-
   "^rtc@[0-9a-f]+$":
     type: object
     $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 7149784a36ac..3ee77af5a74c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -84,6 +84,13 @@ patternProperties:
   "^otp(-[0-9]+)?$":
     type: object
 
+  spi-cpol: true
+  spi-cpha: true
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 376e739bcad4..49b4f7a32e71 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -14,9 +14,6 @@ description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
     enum:
@@ -61,7 +58,7 @@ properties:
       - const: pcie
       - const: pcie_bus
       - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
+      - enum: [ pcie_inbound_axi, pcie_aux ]
 
   num-lanes:
     const: 1
@@ -175,6 +172,47 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_inbound_axi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - {}
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 48ed227fc5b9..53da2edd7c9a 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
similarity index 85%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
index f3a5fbabbbb5..bb01c6b34dab 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB2 PHY
@@ -13,8 +13,8 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb2-phy
-      - amlogic,meson-a1-usb2-phy
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -68,7 +68,7 @@ additionalProperties: false
 examples:
   - |
     phy@36000 {
-          compatible = "amlogic,meson-g12a-usb2-phy";
+          compatible = "amlogic,g12a-usb2-phy";
           reg = <0x36000 0x2000>;
           clocks = <&xtal>;
           clock-names = "xtal";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 868b4e6fde71..129d26e99776 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -49,7 +49,7 @@ additionalProperties: false
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 89b8f3dd67a1..3342847dcb19 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -87,6 +87,8 @@ patternProperties:
           "wifi_led"        "led"       1, 2
           "i2c"             "i2c"       3, 4
           "uart1_0"         "uart"      7, 8, 9, 10
+          "uart1_rx_tx"     "uart"      42, 43
+          "uart1_cts_rts"   "uart"      44, 45
           "pcie_clk"        "pcie"      9
           "pcie_wake"       "pcie"      10
           "spi1_0"          "spi"       11, 12, 13, 14
@@ -98,9 +100,11 @@ patternProperties:
           "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
                                         31, 32
           "spi1_1"          "spi"       23, 24, 25, 26
-          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_2_rx_tx"   "uart"      29, 30
+          "uart1_2_cts_rts" "uart"      31, 32
           "uart1_1"         "uart"      23, 24, 25, 26
-          "uart2_0"         "uart"      29, 30, 31, 32
+          "uart2_0_rx_tx"   "uart"      29, 30
+          "uart2_0_cts_rts" "uart"      31, 32
           "spi0"            "spi"       33, 34, 35, 36
           "spi0_wp_hold"    "spi"       37, 38
           "uart1_3_rx_tx"   "uart"      35, 36
@@ -157,7 +161,7 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  enum: [emmc_45, emmc_51]
           - if:
               properties:
                 function:
@@ -221,8 +225,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
-                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+                  items:
+                    enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1,
+                           uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx,
+                           uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts,
+                           uart2_1, uart0, uart1, uart2]
+                  maxItems: 2
           - if:
               properties:
                 function:
@@ -356,6 +364,27 @@ examples:
         interrupt-parent = <&gic>;
         #interrupt-cells = <2>;
 
+        pcie_pins: pcie-pins {
+          mux {
+            function = "pcie";
+            groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+          };
+        };
+
+        pwm_pins: pwm-pins {
+          mux {
+            function = "pwm";
+            groups = "pwm0", "pwm1_0";
+          };
+        };
+
+        spi0_pins: spi0-pins {
+          mux {
+            function = "spi";
+            groups = "spi0", "spi0_wp_hold";
+          };
+        };
+
         uart1_pins: uart1-pins {
           mux {
             function = "uart";
@@ -363,6 +392,13 @@ examples:
           };
         };
 
+        uart1_3_pins: uart1-3-pins {
+          mux {
+            function = "uart";
+            groups = "uart1_3_rx_tx", "uart1_3_cts_rts";
+          };
+        };
+
         uart2_pins: uart2-pins {
           mux {
             function = "uart";
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index d96170eecbd2..0b1eca734d3b 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -56,7 +56,6 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: reboot-mode.yaml#
   - if:
       properties:
         compatible:
@@ -66,6 +65,9 @@ allOf:
               - qcom,pms405-pon
               - qcom,pm8998-pon
     then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
       properties:
         reg:
           maxItems: 1
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
index a7fae1772a81..cd8e9a8907f8 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
@@ -30,7 +30,9 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    enum: [2, 3]
+    description:
+      The only flag supported by the controller is PWM_POLARITY_INVERTED.
 
   microchip,sync-update-mask:
     description: |
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
index 01f9d4e236e9..a7feb497eb89 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -19,8 +19,8 @@ description: |
   additional information and example.
 
 patternProperties:
-  # 25 LDOs
-  "^LDO([1-9]|[1][0-9]|2[0-5])$":
+  # 25 LDOs, without LDO10-12
+  "^LDO([1-9]|1[3-9]|2[0-5])$":
     type: object
     $ref: regulator.yaml#
     unevaluatedProperties: false
@@ -30,6 +30,23 @@ patternProperties:
     required:
       - regulator-name
 
+  "^LDO(1[0-2])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      samsung,ext-control-gpios:
+        maxItems: 1
+        description:
+          LDO10, LDO11 and LDO12 can be configured to external control over
+          GPIO.
+
+    required:
+      - regulator-name
+
   # 5 bucks
   "^BUCK[1-5]$":
     type: object
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
index 90a7cabf58fe..d4148418350c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -80,7 +80,7 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
     $ref: "/schemas/types.yaml#/definitions/string"
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index 0fa8e3e43bf8..1a7e4bff0456 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -23,6 +23,9 @@ Optional properties:
     1 = active low.
 - irda-mode-ports: An array that lists the indices of the port that
 		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
 
 Example:
         sc16is750: sc16is750@51 {
@@ -35,6 +38,26 @@ Example:
                 #gpio-cells = <2>;
         };
 
+	sc16is752: sc16is752@53 {
+		compatible = "nxp,sc16is752";
+		reg = <0x53>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@54 {
+		compatible = "nxp,sc16is752";
+		reg = <0x54>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
+
 * spi as bus
 
 Required properties:
@@ -59,6 +82,9 @@ Optional properties:
     1 = active low.
 - irda-mode-ports: An array that lists the indices of the port that
 		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
 
 Example:
 	sc16is750: sc16is750@0 {
@@ -70,3 +96,23 @@ Example:
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	sc16is752: sc16is752@1 {
+		compatible = "nxp,sc16is752";
+		reg = <1>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@2 {
+		compatible = "nxp,sc16is752";
+		reg = <2>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f930e7f1349f..52c094873863 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -91,7 +91,7 @@ properties:
           - description: Error interrupt
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
-          - description: Transmit End interrupt
+          - description: Break interrupt
       - items:
           - description: Error interrupt
           - description: Receive buffer full interrupt
@@ -106,7 +106,7 @@ properties:
           - const: eri
           - const: rxi
           - const: txi
-          - const: tei
+          - const: bri
       - items:
           - const: eri
           - const: rxi
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 5b8d59245f82..b358fd601ed3 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -62,7 +62,7 @@ patternProperties:
         description: phandle of the CPU DAI
 
     patternProperties:
-      "^codec-[0-9]+$":
+      "^codec(-[0-9]+)?$":
         type: object
         additionalProperties: false
         description: |-
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml
old mode 100755
new mode 100644
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
index 1de11e7f33bb..c8d803097d81 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -27,6 +27,7 @@ properties:
     const: 0
 
   clocks:
+    minItems: 3
     maxItems: 5
 
   clock-names:
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/rt5682.txt linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
index c5f2b8febcee..6b87db68337c 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -46,7 +46,7 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
-- #sound-dai-cells: Should be set to '<0>'.
+- #sound-dai-cells: Should be set to '<1>'.
 
 Pins on the device (for linking into audio routes) for RT5682:
 
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
index 30f6b029ac08..cb519a4b6e71 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -52,7 +52,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -69,7 +71,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
index bc90e72bf7cf..1859fbe1cdf1 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -54,7 +54,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -71,7 +73,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml
index 66a0df8850ea..079cb6f8d447 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -47,7 +47,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible
@@ -64,7 +66,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index dc9d6ed0781d..5d0bfea2c087 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -64,7 +64,7 @@ properties:
     description:
       size of memory intended as internal memory for endpoints
       buffers expressed in KB
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint16
 
   cdns,phyrst-a-enable:
     description: Enable resetting of PHY if Rx fail is detected
diff --git linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 6d78048c4613..045fc7a28c45 100644
--- linux-libre-6.1-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ linux-libre-6.1.56-gnu/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -260,7 +260,7 @@ properties:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
-    $ref: /schemas/types.yaml#/definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/string
     enum: [utmi, ulpi]
 
   snps,quirk-frame-length-adjustment:
diff --git linux-libre-6.1-gnu/Documentation/driver-api/spi.rst linux-libre-6.1.56-gnu/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-6.1-gnu/Documentation/driver-api/spi.rst
+++ linux-libre-6.1.56-gnu/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-6.1-gnu/Documentation/fault-injection/fault-injection.rst linux-libre-6.1.56-gnu/Documentation/fault-injection/fault-injection.rst
index 17779a2772e5..5f6454b9dbd4 100644
--- linux-libre-6.1-gnu/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-6.1.56-gnu/Documentation/fault-injection/fault-injection.rst
@@ -83,9 +83,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most. A value of -1
-	means "no limit". Note, though, that this file only accepts unsigned
-	values. So, if you want to specify -1, you better use 'printf' instead
-	of 'echo', e.g.: $ printf %#x -1 > times
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -284,7 +282,7 @@ Application Examples
     echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -338,7 +336,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 10 > /sys/kernel/debug/$FAILTYPE/probability
     echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
     echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
@@ -369,7 +367,7 @@ Application Examples
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
-    printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
     echo 0 > /sys/kernel/debug/$FAILTYPE/space
     echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
 
diff --git linux-libre-6.1-gnu/Documentation/fault-injection/provoke-crashes.rst linux-libre-6.1.56-gnu/Documentation/fault-injection/provoke-crashes.rst
index 3abe84225613..1f087e502ca6 100644
--- linux-libre-6.1-gnu/Documentation/fault-injection/provoke-crashes.rst
+++ linux-libre-6.1.56-gnu/Documentation/fault-injection/provoke-crashes.rst
@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT.
+	FS_SUBMIT_BH, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ, or DIRECT.
 
 cpoint_type
 	Indicates the action to be taken on hitting the crash point.
diff --git linux-libre-6.1-gnu/Documentation/filesystems/autofs-mount-control.rst linux-libre-6.1.56-gnu/Documentation/filesystems/autofs-mount-control.rst
index bf4b511cdbe8..b5a379d25c40 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/autofs-mount-control.rst
+++ linux-libre-6.1.56-gnu/Documentation/filesystems/autofs-mount-control.rst
@@ -196,7 +196,7 @@ information and return operation results::
 		    struct args_ismountpoint	ismountpoint;
 	    };
 
-	    char path[0];
+	    char path[];
     };
 
 The ioctlfd field is a mount point file descriptor of an autofs mount
diff --git linux-libre-6.1-gnu/Documentation/filesystems/autofs.rst linux-libre-6.1.56-gnu/Documentation/filesystems/autofs.rst
index 4f490278d22f..3b6e38e646cd 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/autofs.rst
+++ linux-libre-6.1.56-gnu/Documentation/filesystems/autofs.rst
@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
 			struct args_ismountpoint	ismountpoint;
 		};
 
-                char path[0];
+                char path[];
         };
 
 For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target
diff --git linux-libre-6.1-gnu/Documentation/filesystems/directory-locking.rst linux-libre-6.1.56-gnu/Documentation/filesystems/directory-locking.rst
index 504ba940c36c..dccd61c7c5c3 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-6.1.56-gnu/Documentation/filesystems/directory-locking.rst
@@ -22,12 +22,11 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
+parent and finds source and target.  We lock both (provided they exist).  If we
+need to lock two inodes of different type (dir vs non-dir), we lock directory
+first.  If we need to lock two inodes of the same type, lock them in inode
+pointer order.  Then call the method.  All locks are exclusive.
 NB: we might get away with locking the source (and target in exchange
 case) shared.
 
@@ -44,15 +43,17 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock them in inode pointer order.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock both the source and the target provided they exist. If we
+	  need to lock two inodes of different type (dir vs non-dir), we lock
+	  the directory first. If we need to lock two inodes of the same type,
+	  lock them in inode pointer order.
 	* call the method.
 
 All ->i_rwsem are taken exclusive.  Again, we might get away with locking
@@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git linux-libre-6.1-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.1.56-gnu/Documentation/filesystems/mount_api.rst
index eb358a00be27..1d16787a00e9 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.1.56-gnu/Documentation/filesystems/mount_api.rst
@@ -814,6 +814,7 @@ process the parameters it is given.
        int fs_lookup_param(struct fs_context *fc,
 			   struct fs_parameter *value,
 			   bool want_bdev,
+			   unsigned int flags,
 			   struct path *_path);
 
      This takes a parameter that carries a string or filename type and attempts
diff --git linux-libre-6.1-gnu/Documentation/filesystems/vfs.rst linux-libre-6.1.56-gnu/Documentation/filesystems/vfs.rst
index 2b55f71e2ae1..b5e8b8af8afb 100644
--- linux-libre-6.1-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-6.1.56-gnu/Documentation/filesystems/vfs.rst
@@ -1221,7 +1221,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-6.1-gnu/Documentation/gpu/todo.rst linux-libre-6.1.56-gnu/Documentation/gpu/todo.rst
index 393d218e4a0c..b2c6aaf1edf2 100644
--- linux-libre-6.1-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.1.56-gnu/Documentation/gpu/todo.rst
@@ -651,17 +651,6 @@ See drivers/gpu/drm/amd/display/TODO for tasks.
 
 Contact: Harry Wentland, Alex Deucher
 
-vmwgfx: Replace hashtable with Linux' implementation
-----------------------------------------------------
-
-The vmwgfx driver uses its own hashtable implementation. Replace the
-code with Linux' implementation and update the callers. It's mostly a
-refactoring task, but the interfaces are different.
-
-Contact: Zack Rusin, Thomas Zimmermann <tzimmermann@suse.de>
-
-Level: Intermediate
-
 Bootsplash
 ==========
 
diff --git linux-libre-6.1-gnu/Documentation/hwmon/ftsteutates.rst linux-libre-6.1.56-gnu/Documentation/hwmon/ftsteutates.rst
index 58a2483d8d0d..198fa8e2819d 100644
--- linux-libre-6.1-gnu/Documentation/hwmon/ftsteutates.rst
+++ linux-libre-6.1.56-gnu/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 8 fans. It also contains an integrated watchdog which is currently
 implemented in this driver.
 
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
 To clear a temperature or fan alarm, execute the following command with the
 correct path to the alarm file::
 
diff --git linux-libre-6.1-gnu/Documentation/mm/multigen_lru.rst linux-libre-6.1.56-gnu/Documentation/mm/multigen_lru.rst
index d7062c6a8946..d8f721f98868 100644
--- linux-libre-6.1-gnu/Documentation/mm/multigen_lru.rst
+++ linux-libre-6.1.56-gnu/Documentation/mm/multigen_lru.rst
@@ -89,15 +89,15 @@ variables are monotonically increasing.
 
 Generation numbers are truncated into ``order_base_2(MAX_NR_GENS+1)``
 bits in order to fit into the gen counter in ``folio->flags``. Each
-truncated generation number is an index to ``lrugen->lists[]``. The
+truncated generation number is an index to ``lrugen->folios[]``. The
 sliding window technique is used to track at least ``MIN_NR_GENS`` and
 at most ``MAX_NR_GENS`` generations. The gen counter stores a value
 within ``[1, MAX_NR_GENS]`` while a page is on one of
-``lrugen->lists[]``; otherwise it stores zero.
+``lrugen->folios[]``; otherwise it stores zero.
 
 Each generation is divided into multiple tiers. A page accessed ``N``
 times through file descriptors is in tier ``order_base_2(N)``. Unlike
-generations, tiers do not have dedicated ``lrugen->lists[]``. In
+generations, tiers do not have dedicated ``lrugen->folios[]``. In
 contrast to moving across generations, which requires the LRU lock,
 moving across tiers only involves atomic operations on
 ``folio->flags`` and therefore has a negligible cost. A feedback loop
@@ -127,7 +127,7 @@ page mapped by this PTE to ``(max_seq%MAX_NR_GENS)+1``.
 Eviction
 --------
 The eviction consumes old generations. Given an ``lruvec``, it
-increments ``min_seq`` when ``lrugen->lists[]`` indexed by
+increments ``min_seq`` when ``lrugen->folios[]`` indexed by
 ``min_seq%MAX_NR_GENS`` becomes empty. To select a type and a tier to
 evict from, it first compares ``min_seq[]`` to select the older type.
 If both types are equally old, it selects the one whose first tier has
diff --git linux-libre-6.1-gnu/Documentation/mm/page_table_check.rst linux-libre-6.1.56-gnu/Documentation/mm/page_table_check.rst
index 1a09472f10a3..d19ca356b7bf 100644
--- linux-libre-6.1-gnu/Documentation/mm/page_table_check.rst
+++ linux-libre-6.1.56-gnu/Documentation/mm/page_table_check.rst
@@ -54,3 +54,22 @@ Build kernel with:
 
 Optionally, build kernel with PAGE_TABLE_CHECK_ENFORCED in order to have page
 table support without extra kernel parameter.
+
+Implementation notes
+====================
+
+We specifically decided not to use VMA information in order to avoid relying on
+MM states (except for limited "struct page" info). The page table check is a
+separate from Linux-MM state machine that verifies that the user accessible
+pages are not falsely shared.
+
+PAGE_TABLE_CHECK depends on EXCLUSIVE_SYSTEM_RAM. The reason is that without
+EXCLUSIVE_SYSTEM_RAM, users are allowed to map arbitrary physical memory
+regions into the userspace via /dev/mem. At the same time, pages may change
+their properties (e.g., from anonymous pages to named pages) while they are
+still being mapped in the userspace, leading to "corruption" detected by the
+page table check.
+
+Even with EXCLUSIVE_SYSTEM_RAM, I/O pages may be still allowed to be mapped via
+/dev/mem. However, these pages are always considered as named pages, so they
+won't break the logic used in the page table check.
diff --git linux-libre-6.1-gnu/Documentation/mm/zsmalloc.rst linux-libre-6.1.56-gnu/Documentation/mm/zsmalloc.rst
index 6e79893d6132..d98607aa9c1f 100644
--- linux-libre-6.1-gnu/Documentation/mm/zsmalloc.rst
+++ linux-libre-6.1.56-gnu/Documentation/mm/zsmalloc.rst
@@ -68,6 +68,8 @@ pages_used
 	the number of pages allocated for the class
 pages_per_zspage
 	the number of 0-order pages to make a zspage
+freeable
+	the approximate number of pages class compaction can free
 
 We assign a zspage to ZS_ALMOST_EMPTY fullness group when n <= N / f, where
 
diff --git linux-libre-6.1-gnu/Documentation/networking/af_xdp.rst linux-libre-6.1.56-gnu/Documentation/networking/af_xdp.rst
index 60b217b436be..5b77b9e5ac7e 100644
--- linux-libre-6.1-gnu/Documentation/networking/af_xdp.rst
+++ linux-libre-6.1.56-gnu/Documentation/networking/af_xdp.rst
@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
 application to use. The final option is the flags field, but it will
 be dealt with in separate sections for each UMEM flag.
 
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
 XDP_STATISTICS getsockopt
 -------------------------
 
diff --git linux-libre-6.1-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.1.56-gnu/Documentation/networking/ip-sysctl.rst
index e7b3fa7bb3f7..3301288a7c69 100644
--- linux-libre-6.1-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.1.56-gnu/Documentation/networking/ip-sysctl.rst
@@ -337,6 +337,8 @@ tcp_app_win - INTEGER
 	Reserve max(window/2^tcp_app_win, mss) of window for application
 	buffer. Value 0 is special, it means that nothing is reserved.
 
+	Possible values are [0, 31], inclusive.
+
 	Default: 31
 
 tcp_autocorking - BOOLEAN
@@ -1245,8 +1247,8 @@ ping_group_range - 2 INTEGERS
 	Restrict ICMP_PROTO datagram sockets to users in the group range.
 	The default is "1 0", meaning, that nobody (not even root) may
 	create ping sockets.  Setting it to "100 100" would grant permissions
-	to the single group. "0 4294967295" would enable it for the world, "100
-	4294967295" would enable it for the users, but not daemons.
+	to the single group. "0 4294967294" would enable it for the world, "100
+	4294967294" would enable it for the users, but not daemons.
 
 tcp_early_demux - BOOLEAN
 	Enable early demux for established TCP sockets.
diff --git linux-libre-6.1-gnu/Documentation/process/changes.rst linux-libre-6.1.56-gnu/Documentation/process/changes.rst
index 9844ca3a71a6..c76b02d94094 100644
--- linux-libre-6.1-gnu/Documentation/process/changes.rst
+++ linux-libre-6.1.56-gnu/Documentation/process/changes.rst
@@ -60,6 +60,7 @@ openssl & libcrypto    1.0.0            openssl version
 bc                     1.06.95          bc --version
 Sphinx\ [#f1]_         1.7              sphinx-build --version
 cpio                   any              cpio --version
+gtags (optional)       6.6.5            gtags --version
 ====================== ===============  ========================================
 
 .. [#f1] Sphinx is needed only to build the Kernel documentation
@@ -174,6 +175,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is
 enabled.  You will also need openssl development packages to build kernels 4.3
 and higher.
 
+gtags / GNU GLOBAL (optional)
+-----------------------------
+
+The kernel build requires GNU GLOBAL version 6.6.5 or later to generate
+tag files through ``make gtags``.  This is due to its use of the gtags
+``-C (--directory)`` flag.
 
 System utilities
 ****************
diff --git linux-libre-6.1-gnu/Documentation/riscv/vm-layout.rst linux-libre-6.1.56-gnu/Documentation/riscv/vm-layout.rst
index 5b36e45fef60..edb533128712 100644
--- linux-libre-6.1-gnu/Documentation/riscv/vm-layout.rst
+++ linux-libre-6.1.56-gnu/Documentation/riscv/vm-layout.rst
@@ -47,7 +47,7 @@ RISC-V Linux Kernel SV39
                                                               | Kernel-space virtual memory, shared between all processes:
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
-   ffffffc6fee00000 | -228    GB | ffffffc6feffffff |    2 MB | fixmap
+   ffffffc6fea00000 | -228    GB | ffffffc6feffffff |    6 MB | fixmap
    ffffffc6ff000000 | -228    GB | ffffffc6ffffffff |   16 MB | PCI io
    ffffffc700000000 | -228    GB | ffffffc7ffffffff |    4 GB | vmemmap
    ffffffc800000000 | -224    GB | ffffffd7ffffffff |   64 GB | vmalloc/ioremap space
@@ -83,7 +83,7 @@ RISC-V Linux Kernel SV48
                                                               | Kernel-space virtual memory, shared between all processes:
   ____________________________________________________________|___________________________________________________________
                     |            |                  |         |
-   ffff8d7ffee00000 |  -114.5 TB | ffff8d7ffeffffff |    2 MB | fixmap
+   ffff8d7ffea00000 |  -114.5 TB | ffff8d7ffeffffff |    6 MB | fixmap
    ffff8d7fff000000 |  -114.5 TB | ffff8d7fffffffff |   16 MB | PCI io
    ffff8d8000000000 |  -114.5 TB | ffff8f7fffffffff |    2 TB | vmemmap
    ffff8f8000000000 |  -112.5 TB | ffffaf7fffffffff |   32 TB | vmalloc/ioremap space
diff --git linux-libre-6.1-gnu/Documentation/scsi/scsi_mid_low_api.rst linux-libre-6.1.56-gnu/Documentation/scsi/scsi_mid_low_api.rst
index a8c5bd15a440..edfd179b9c7c 100644
--- linux-libre-6.1-gnu/Documentation/scsi/scsi_mid_low_api.rst
+++ linux-libre-6.1.56-gnu/Documentation/scsi/scsi_mid_low_api.rst
@@ -1190,11 +1190,11 @@ Members of interest:
 		 - pointer to scsi_device object that this command is
                    associated with.
     resid
-		 - an LLD should set this signed integer to the requested
+		 - an LLD should set this unsigned integer to the requested
                    transfer length (i.e. 'request_bufflen') less the number
                    of bytes that are actually transferred. 'resid' is
                    preset to 0 so an LLD can ignore it if it cannot detect
-                   underruns (overruns should be rare). If possible an LLD
+                   underruns (overruns should not be reported). An LLD
                    should set 'resid' prior to invoking 'done'. The most
                    interesting case is data transfers from a SCSI target
                    device (e.g. READs) that underrun.
diff --git linux-libre-6.1-gnu/Documentation/security/keys/trusted-encrypted.rst linux-libre-6.1.56-gnu/Documentation/security/keys/trusted-encrypted.rst
index 0bfb4c339748..9bc9db8ec651 100644
--- linux-libre-6.1-gnu/Documentation/security/keys/trusted-encrypted.rst
+++ linux-libre-6.1.56-gnu/Documentation/security/keys/trusted-encrypted.rst
@@ -350,7 +350,8 @@ Load an encrypted key "evm" from saved blob::
 
 Instantiate an encrypted key "evm" using user-provided decrypted data::
 
-    $ keyctl add encrypted evm "new default user:kmk 32 `cat evm_decrypted_data.blob`" @u
+    $ evmkey=$(dd if=/dev/urandom bs=1 count=32 | xxd -c32 -p)
+    $ keyctl add encrypted evm "new default user:kmk 32 $evmkey" @u
     794890253
 
     $ keyctl print 794890253
diff --git linux-libre-6.1-gnu/Documentation/sound/hd-audio/models.rst linux-libre-6.1.56-gnu/Documentation/sound/hd-audio/models.rst
index 9b52f50a6854..120430450014 100644
--- linux-libre-6.1-gnu/Documentation/sound/hd-audio/models.rst
+++ linux-libre-6.1.56-gnu/Documentation/sound/hd-audio/models.rst
@@ -704,7 +704,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
diff --git linux-libre-6.1-gnu/Documentation/sphinx/load_config.py linux-libre-6.1.56-gnu/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-6.1-gnu/Documentation/sphinx/load_config.py
+++ linux-libre-6.1.56-gnu/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-6.1-gnu/Documentation/trace/ftrace.rst linux-libre-6.1.56-gnu/Documentation/trace/ftrace.rst
index 60bceb018d6a..21f01d32c959 100644
--- linux-libre-6.1-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-6.1.56-gnu/Documentation/trace/ftrace.rst
@@ -2940,7 +2940,7 @@ Produces::
               bash-1994  [000] ....  4342.324898: ima_get_action <-process_measurement
               bash-1994  [000] ....  4342.324898: ima_match_policy <-ima_get_action
               bash-1994  [000] ....  4342.324899: do_truncate <-do_last
-              bash-1994  [000] ....  4342.324899: should_remove_suid <-do_truncate
+              bash-1994  [000] ....  4342.324899: setattr_should_drop_suidgid <-do_truncate
               bash-1994  [000] ....  4342.324899: notify_change <-do_truncate
               bash-1994  [000] ....  4342.324900: current_fs_time <-notify_change
               bash-1994  [000] ....  4342.324900: current_kernel_time <-current_fs_time
diff --git linux-libre-6.1-gnu/Documentation/trace/kprobes.rst linux-libre-6.1.56-gnu/Documentation/trace/kprobes.rst
index 48cf778a2468..fc7ce76eab65 100644
--- linux-libre-6.1-gnu/Documentation/trace/kprobes.rst
+++ linux-libre-6.1.56-gnu/Documentation/trace/kprobes.rst
@@ -131,8 +131,7 @@ For example, if the function is non-recursive and is called with a
 spinlock held, maxactive = 1 should be enough.  If the function is
 non-recursive and can never relinquish the CPU (e.g., via a semaphore
 or preemption), NR_CPUS should be enough.  If maxactive <= 0, it is
-set to a default value.  If CONFIG_PREEMPT is enabled, the default
-is max(10, 2*NR_CPUS).  Otherwise, the default is NR_CPUS.
+set to a default value: max(10, 2*NR_CPUS).
 
 It's not a disaster if you set maxactive too low; you'll just miss
 some probes.  In the kretprobe struct, the nmissed field is set to
diff --git linux-libre-6.1-gnu/Documentation/trace/kprobetrace.rst linux-libre-6.1.56-gnu/Documentation/trace/kprobetrace.rst
index 4274cc6a2f94..08a2a6a3782f 100644
--- linux-libre-6.1-gnu/Documentation/trace/kprobetrace.rst
+++ linux-libre-6.1.56-gnu/Documentation/trace/kprobetrace.rst
@@ -58,8 +58,8 @@ Synopsis of kprobe_events
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
 		  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
-		  (x8/x16/x32/x64), "string", "ustring" and bitfield
-		  are supported.
+		  (x8/x16/x32/x64), "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
 
   (\*1) only for the probe on function entry (offs == 0).
   (\*2) only for return probe.
@@ -96,6 +96,10 @@ offset, and container-size (usually 32). The syntax is::
 
 Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
 which shows given pointer in "symbol+offset" style.
+On the other hand, symbol-string type ('symstr') converts the given address to
+"symbol+offset/symbolsize" style and stores it as a null-terminated string.
+With 'symstr' type, you can filter the event with wildcard pattern of the
+symbols, and you don't need to solve symbol name by yourself.
 For $comm, the default type is "string"; any other type is invalid.
 
 .. _user_mem_access:
diff --git linux-libre-6.1-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst linux-libre-6.1.56-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
index cd33857d947d..0ef49647c90b 100644
--- linux-libre-6.1-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
+++ linux-libre-6.1.56-gnu/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -2923,6 +2923,13 @@ This structure contains all loop filter related parameters. See sections
       - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - PocLtCurr as described in section 8.3.2 "Decoding process for reference
         picture set": provides the index of the long term references in DPB array.
+    * - __u8
+      - ``num_delta_pocs_of_ref_rps_idx``
+      - When the short_term_ref_pic_set_sps_flag in the slice header is equal to 0,
+        it is the same as the derived value NumDeltaPocs[RefRpsIdx]. It can be used to parse
+        the RPS data in slice headers instead of skipping it with @short_term_ref_pic_set_size.
+        When the value of short_term_ref_pic_set_sps_flag in the slice header is
+        equal to 1, num_delta_pocs_of_ref_rps_idx shall be set to 0.
     * - struct :c:type:`v4l2_hevc_dpb_entry`
       - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - The decoded picture buffer, for meta-data about reference frames.
diff --git linux-libre-6.1-gnu/Documentation/virt/kvm/api.rst linux-libre-6.1.56-gnu/Documentation/virt/kvm/api.rst
index 896914e3a847..1bc61bf804f1 100644
--- linux-libre-6.1-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.1.56-gnu/Documentation/virt/kvm/api.rst
@@ -4483,6 +4483,18 @@ not holding a previously reported uncorrected error).
 :Parameters: struct kvm_s390_cmma_log (in, out)
 :Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 
@@ -4563,12 +4575,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 ----------------------------
 
@@ -8248,6 +8254,20 @@ CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``
 It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
 has enabled in-kernel emulation of the local APIC.
 
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems.  Different
+versions of KVM return different values for this information and userspace
+should not rely on it.  Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU.  In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
 Obsolete ioctls and capabilities
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git linux-libre-6.1-gnu/Documentation/virt/kvm/devices/vm.rst linux-libre-6.1.56-gnu/Documentation/virt/kvm/devices/vm.rst
index 60acc39e0e93..147efec626e5 100644
--- linux-libre-6.1-gnu/Documentation/virt/kvm/devices/vm.rst
+++ linux-libre-6.1.56-gnu/Documentation/virt/kvm/devices/vm.rst
@@ -302,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 :Parameters: none
 :Returns:   -ENOMEM if there is not enough free memory to start migration mode;
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined);
diff --git linux-libre-6.1-gnu/Documentation/x86/amd-memory-encryption.rst linux-libre-6.1.56-gnu/Documentation/x86/amd-memory-encryption.rst
index a1940ebe7be5..934310ce7258 100644
--- linux-libre-6.1-gnu/Documentation/x86/amd-memory-encryption.rst
+++ linux-libre-6.1.56-gnu/Documentation/x86/amd-memory-encryption.rst
@@ -95,3 +95,39 @@ by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
 not enable SME, then Linux will not be able to activate memory encryption, even
 if configured to do so by default or the mem_encrypt=on command line parameter
 is specified.
+
+Secure Nested Paging (SNP)
+==========================
+
+SEV-SNP introduces new features (SEV_FEATURES[1:63]) which can be enabled
+by the hypervisor for security enhancements. Some of these features need
+guest side implementation to function correctly. The below table lists the
+expected guest behavior with various possible scenarios of guest/hypervisor
+SNP feature support.
+
++-----------------+---------------+---------------+------------------+
+| Feature Enabled | Guest needs   | Guest has     | Guest boot       |
+| by the HV       | implementation| implementation| behaviour        |
++=================+===============+===============+==================+
+|      No         |      No       |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      Yes      |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      No       |      No       | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      No       | Graceful boot    |
+|                 |               |               | failure          |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      Yes      | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+
+More details in AMD64 APM[1] Vol 2: 15.34.10 SEV_STATUS MSR
+
+[1] https://www.amd.com/system/files/TechDocs/40332.pdf
diff --git linux-libre-6.1-gnu/MAINTAINERS linux-libre-6.1.56-gnu/MAINTAINERS
index 886d3f69ee64..07a9c274c0e2 100644
--- linux-libre-6.1-gnu/MAINTAINERS
+++ linux-libre-6.1.56-gnu/MAINTAINERS
@@ -3444,7 +3444,7 @@ F:	drivers/net/ieee802154/atusb.h
 AUDIT SUBSYSTEM
 M:	Paul Moore <paul@paul-moore.com>
 M:	Eric Paris <eparis@redhat.com>
-L:	linux-audit@redhat.com (moderated for non-subscribers)
+L:	audit@vger.kernel.org
 S:	Supported
 W:	https://github.com/linux-audit
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git
@@ -5183,8 +5183,8 @@ S:	Supported
 W:	https://wiki.samba.org/index.php/LinuxCIFS
 T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
-F:	fs/cifs/
-F:	fs/smbfs_common/
+F:	fs/smb/client/
+F:	fs/smb/common/
 F:	include/uapi/linux/cifs
 
 COMPACTPCI HOTPLUG CORE
@@ -6027,7 +6027,7 @@ S:	Supported
 F:	Documentation/networking/devlink
 F:	include/net/devlink.h
 F:	include/uapi/linux/devlink.h
-F:	net/core/devlink.c
+F:	net/devlink/
 
 DH ELECTRONICS IMX6 DHCOM BOARD SUPPORT
 M:	Christoph Niedermaier <cniedermaier@dh-electronics.com>
@@ -9362,7 +9362,7 @@ F:	drivers/net/wireless/intersil/hostap/
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
 L:	platform-driver-x86@vger.kernel.org
 S:	Orphan
-F:	drivers/platform/x86/tc1100-wmi.c
+F:	drivers/platform/x86/hp/tc1100-wmi.c
 
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -11112,6 +11112,8 @@ M:	Kees Cook <keescook@chromium.org>
 L:	linux-hardening@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
+F:	Documentation/ABI/testing/sysfs-kernel-oops_count
+F:	Documentation/ABI/testing/sysfs-kernel-warn_count
 F:	include/linux/overflow.h
 F:	include/linux/randomize_kstack.h
 F:	mm/usercopy.c
@@ -11166,8 +11168,8 @@ L:	linux-cifs@vger.kernel.org
 S:	Maintained
 T:	git git://git.samba.org/ksmbd.git
 F:	Documentation/filesystems/cifs/ksmbd.rst
-F:	fs/ksmbd/
-F:	fs/smbfs_common/
+F:	fs/smb/common/
+F:	fs/smb/server/
 
 KERNEL UNIT TESTING FRAMEWORK (KUnit)
 M:	Brendan Higgins <brendanhiggins@google.com>
@@ -11856,7 +11858,7 @@ M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/misc-devices/lis3lv02d.rst
 F:	drivers/misc/lis3lv02d/
-F:	drivers/platform/x86/hp_accel.c
+F:	drivers/platform/x86/hp/hp_accel.c
 
 LIST KUNIT TEST
 M:	David Gow <davidgow@google.com>
diff --git linux-libre-6.1-gnu/Makefile linux-libre-6.1.56-gnu/Makefile
index fddcc9a95e63..0f5fad339ba3 100644
--- linux-libre-6.1-gnu/Makefile
+++ linux-libre-6.1.56-gnu/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 0
+SUBLEVEL = 56
 EXTRAVERSION = -gnu
-NAME = Hurr durr I'ma ninja sloth
+NAME = Curry Ramen
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -93,10 +93,17 @@ endif
 
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
 
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
-  quiet=silent_
-  KBUILD_VERBOSE = 0
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
+else
+silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
+endif
+
+ifeq ($(silence),s)
+quiet=silent_
+KBUILD_VERBOSE = 0
 endif
 
 export quiet Q KBUILD_VERBOSE
@@ -538,7 +545,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 RUSTFLAGS_KERNEL =
 AFLAGS_KERNEL	=
-export LDFLAGS_vmlinux =
+LDFLAGS_vmlinux =
 
 # Use USERINCLUDE when you must reference the UAPI directories only.
 USERINCLUDE    := \
@@ -1232,6 +1239,18 @@ vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
 	@:
 
 PHONY += vmlinux
+# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
+# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
+# unrelated; the decompressors just happen to have the same base name,
+# arch/*/boot/compressed/vmlinux.
+# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
+#
+# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
+#   https://savannah.gnu.org/bugs/?61463
+# For Make > 4.4, the following simple code will work:
+#  vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
+vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
 vmlinux: vmlinux.o $(KBUILD_LDS) modpost
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
 
@@ -1272,7 +1291,7 @@ prepare0: archprepare
 # All the preparing..
 prepare: prepare0
 ifdef CONFIG_RUST
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
 	$(Q)$(MAKE) $(build)=rust
 endif
 
@@ -1517,6 +1536,7 @@ endif
 # *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFOBTF_MODULES
 # is an exception.
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
+KBUILD_BUILTIN := 1
 modules: vmlinux
 endif
 
@@ -1797,7 +1817,7 @@ $(DOC_TARGETS):
 # "Is Rust available?" target
 PHONY += rustavailable
 rustavailable:
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v && echo "Rust is available!"
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!"
 
 # Documentation target
 #
@@ -1919,7 +1939,9 @@ quiet_cmd_depmod = DEPMOD  $(MODLIB)
 
 modules_install:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+ifndef modules_sign_only
 	$(call cmd,depmod)
+endif
 
 else # CONFIG_MODULES
 
diff --git linux-libre-6.1-gnu/arch/Kconfig linux-libre-6.1.56-gnu/arch/Kconfig
index 8f138e580d1a..b60d271bf76a 100644
--- linux-libre-6.1-gnu/arch/Kconfig
+++ linux-libre-6.1.56-gnu/arch/Kconfig
@@ -285,6 +285,9 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
+
 # Select if arch init_task must go in the __init_task_data section
 config ARCH_TASK_STRUCT_ON_STACK
 	bool
@@ -635,7 +638,7 @@ config ARCH_SUPPORTS_SHADOW_CALL_STACK
 config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
-	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
diff --git linux-libre-6.1-gnu/arch/alpha/Kconfig linux-libre-6.1.56-gnu/arch/alpha/Kconfig
index 97fce7386b00..d95d82abdf29 100644
--- linux-libre-6.1-gnu/arch/alpha/Kconfig
+++ linux-libre-6.1.56-gnu/arch/alpha/Kconfig
@@ -28,6 +28,7 @@ config ALPHA
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
diff --git linux-libre-6.1-gnu/arch/alpha/boot/tools/objstrip.c linux-libre-6.1.56-gnu/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- linux-libre-6.1-gnu/arch/alpha/boot/tools/objstrip.c
+++ linux-libre-6.1.56-gnu/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git linux-libre-6.1-gnu/arch/alpha/include/asm/bugs.h linux-libre-6.1.56-gnu/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- linux-libre-6.1-gnu/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git linux-libre-6.1-gnu/arch/alpha/include/asm/thread_info.h linux-libre-6.1.56-gnu/arch/alpha/include/asm/thread_info.h
index fdc485d7787a..084c27cb0c70 100644
--- linux-libre-6.1-gnu/arch/alpha/include/asm/thread_info.h
+++ linux-libre-6.1.56-gnu/arch/alpha/include/asm/thread_info.h
@@ -75,7 +75,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/entry.S linux-libre-6.1.56-gnu/arch/alpha/kernel/entry.S
index e227f3a29a43..c41a5a9c3b9f 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-6.1.56-gnu/arch/alpha/kernel/entry.S
@@ -469,8 +469,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/module.c linux-libre-6.1.56-gnu/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/module.c
+++ linux-libre-6.1.56-gnu/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/setup.c linux-libre-6.1.56-gnu/arch/alpha/kernel/setup.c
index 33bf3a627002..45a920ba4921 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/setup.c
+++ linux-libre-6.1.56-gnu/arch/alpha/kernel/setup.c
@@ -385,8 +385,7 @@ setup_memory(void *kernel_end)
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
diff --git linux-libre-6.1-gnu/arch/alpha/kernel/traps.c linux-libre-6.1.56-gnu/arch/alpha/kernel/traps.c
index 8a66fe544c69..d9a67b370e04 100644
--- linux-libre-6.1-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-6.1.56-gnu/arch/alpha/kernel/traps.c
@@ -233,7 +233,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -366,20 +380,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
diff --git linux-libre-6.1-gnu/arch/alpha/mm/fault.c linux-libre-6.1.56-gnu/arch/alpha/mm/fault.c
index ef427a6bdd1a..2b49aa94e4de 100644
--- linux-libre-6.1-gnu/arch/alpha/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/alpha/mm/fault.c
@@ -119,20 +119,12 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		flags |= FAULT_FLAG_USER;
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
+		goto bad_area_nosemaphore;
 
 	/* Ok, we have a good vm_area for this memory access, so
 	   we can handle it.  */
- good_area:
 	si_code = SEGV_ACCERR;
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
@@ -189,6 +181,7 @@ retry:
  bad_area:
 	mmap_read_unlock(mm);
 
+ bad_area_nosemaphore:
 	if (user_mode(regs))
 		goto do_sigsegv;
 
diff --git linux-libre-6.1-gnu/arch/arc/Kconfig linux-libre-6.1.56-gnu/arch/arc/Kconfig
index d9a13ccf89a3..cb1074f74c3f 100644
--- linux-libre-6.1-gnu/arch/arc/Kconfig
+++ linux-libre-6.1.56-gnu/arch/arc/Kconfig
@@ -41,6 +41,7 @@ config ARC
 	select HAVE_PERF_EVENTS
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE
diff --git linux-libre-6.1-gnu/arch/arc/include/asm/atomic-llsc.h linux-libre-6.1.56-gnu/arch/arc/include/asm/atomic-llsc.h
index 1b0ffaeee16d..5258cb81a16b 100644
--- linux-libre-6.1-gnu/arch/arc/include/asm/atomic-llsc.h
+++ linux-libre-6.1.56-gnu/arch/arc/include/asm/atomic-llsc.h
@@ -18,7 +18,7 @@ static inline void arch_atomic_##op(int i, atomic_t *v)			\
 	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
 	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC_OP_RETURN(op, asm_op)				\
@@ -34,7 +34,7 @@ static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 	: [val]	"=&r"	(val)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -56,7 +56,7 @@ static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
diff --git linux-libre-6.1-gnu/arch/arc/include/asm/atomic64-arcv2.h linux-libre-6.1.56-gnu/arch/arc/include/asm/atomic64-arcv2.h
index c5a8010fdc97..9089f34baac3 100644
--- linux-libre-6.1-gnu/arch/arc/include/asm/atomic64-arcv2.h
+++ linux-libre-6.1.56-gnu/arch/arc/include/asm/atomic64-arcv2.h
@@ -60,7 +60,7 @@ static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
 	"	bnz     1b		\n"				\
 	: "=&r"(val)							\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
@@ -77,7 +77,7 @@ static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: [val] "=&r"(val)						\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -99,7 +99,7 @@ static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: "=&r"(orig), "=&r"(val)					\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
diff --git linux-libre-6.1-gnu/arch/arc/include/asm/linkage.h linux-libre-6.1.56-gnu/arch/arc/include/asm/linkage.h
index c9434ff3aa4c..8a3fb71e9cfa 100644
--- linux-libre-6.1-gnu/arch/arc/include/asm/linkage.h
+++ linux-libre-6.1.56-gnu/arch/arc/include/asm/linkage.h
@@ -8,6 +8,10 @@
 
 #include <asm/dwarf.h>
 
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
 #ifdef __ASSEMBLY__
 
 .macro ST2 e, o, off
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
diff --git linux-libre-6.1-gnu/arch/arc/mm/fault.c linux-libre-6.1.56-gnu/arch/arc/mm/fault.c
index 5ca59a482632..f59e722d147f 100644
--- linux-libre-6.1-gnu/arch/arc/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/arc/mm/fault.c
@@ -113,15 +113,9 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (unlikely(address < vma->vm_start)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN) || expand_stack(vma, address))
-			goto bad_area;
-	}
+		goto bad_area_nosemaphore;
 
 	/*
 	 * vm_area is good, now check permissions for this memory access
@@ -161,6 +155,7 @@ retry:
 bad_area:
 	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	/*
 	 * Major/minor page fault accounting
 	 * (in case of retry we only land here once)
diff --git linux-libre-6.1-gnu/arch/arm/Kconfig linux-libre-6.1.56-gnu/arch/arm/Kconfig
index a08c9d092a33..6d5afe2e6ba3 100644
--- linux-libre-6.1-gnu/arch/arm/Kconfig
+++ linux-libre-6.1.56-gnu/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
@@ -122,6 +123,7 @@ config ARM
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
 	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/Makefile linux-libre-6.1.56-gnu/arch/arm/boot/dts/Makefile
index 6aa7dc4db2fc..df6d905eeb87 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/Makefile
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/Makefile
@@ -331,6 +331,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-iconnect.dtb \
 	kirkwood-iomega_ix2_200.dtb \
 	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-l-50.dtb \
 	kirkwood-laplug.dtb \
@@ -861,7 +862,10 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-craneboard.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
+	logicpd-torpedo-35xx-devkit.dtb \
 	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-torpedo-37xx-devkit-28.dtb \
+	logicpd-som-lv-35xx-devkit.dtb \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
@@ -1527,6 +1531,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-388-helios4.dtb \
 	armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
 	armada-398-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
@@ -1556,6 +1562,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt2701-evb.dtb \
 	mt6580-evbp1.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
 	mt6589-aquaris5.dtb \
 	mt6589-fairphone-fp1.dtb \
 	mt6592-evb.dtb \
@@ -1608,6 +1615,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
 	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/am335x-guardian.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/am335x-guardian.dts
index f6356266564c..b357364e93f9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/am335x-guardian.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/am335x-guardian.dts
@@ -103,8 +103,9 @@
 
 	};
 
-	guardian_beeper: dmtimer-pwm@7 {
+	guardian_beeper: pwm-7 {
 		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
 		ti,timers = <&timer7>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&guardian_beeper_pins>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/am3517-evm.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/am3517-evm.dts
index 35b653014f2b..7bab0a9dadb3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/am3517-evm.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/am3517-evm.dts
@@ -150,7 +150,7 @@
 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 	};
 
-	pwm11: dmtimer-pwm@11 {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2fc9a5d5e0c0..625b9b311b49 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-370.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-370.dtsi
index 9dc928859ad3..2013a5ccecd3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-370.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-370.dtsi
@@ -84,7 +84,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-375.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-375.dtsi
index 929deaf312a5..c310ef26d1cc 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-375.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-375.dtsi
@@ -592,7 +592,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-380.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-380.dtsi
index ce1dddb2269b..e94f22b0e9b5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-380.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-380.dtsi
@@ -89,7 +89,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -118,7 +118,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 72ac807cae25..0c1f238e4c30 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -483,7 +489,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-385.dtsi
index 83392b92dae2..be8d607c59b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-385.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-385.dtsi
@@ -93,7 +93,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -121,7 +121,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-39x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-39x.dtsi
index 923b035a3ab3..9d1cac49c022 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-39x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-39x.dtsi
@@ -463,7 +463,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -492,7 +492,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -524,7 +524,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index bf9360f41e0a..5ea9d509cd30 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -107,7 +107,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -135,7 +135,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -163,7 +163,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -191,7 +191,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 0714af52e607..6c6fbb9faf5a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -122,7 +122,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -150,7 +150,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -178,7 +178,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -206,7 +206,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -234,7 +234,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -262,7 +262,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -290,7 +290,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -318,7 +318,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index 9b4cf5ebe6d5..c62aff908ab4 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -63,7 +63,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout.dtsi"
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
index ff4c07c69af1..4554abf0c7cd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -31,7 +31,7 @@
 		};
 
 		system-fault {
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 	};
@@ -51,7 +51,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index a6a2bc3b855c..f11feb98fde3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -162,16 +162,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -179,6 +172,12 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
 		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
@@ -245,7 +244,7 @@
 		};
 	};
 
-	iio-hwmon-battery {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&adc1 7>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index bf59a9962379..77a3a27b04e2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -95,14 +95,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x8000>;
@@ -110,6 +105,13 @@
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
 			compatible = "shared-dma-pool";
@@ -218,7 +220,7 @@
 		};
 	};
 
-	iio-hwmon-battery {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&adc1 7>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
index 3b25c67795dd..4af8a1c96ed6 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -789,7 +789,7 @@
 };
 
 &shdwc {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/at91sam9261ek.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/at91sam9261ek.dts
index 88869ca874d1..045cb253f23a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/at91sam9261ek.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
index f1412ba83def..0454423fe166 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -19,7 +19,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index e20b6d2eb274..1e23e0a80781 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -46,3 +46,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 9d863570fcf3..5dbb950c8113 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -83,3 +83,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm47189-tenda-ac9.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 55b92645b0f1..b7c7bf0be76f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -135,8 +135,8 @@
 			label = "lan4";
 		};
 
-		port@5 {
-			reg = <5>;
+		port@8 {
+			reg = <8>;
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
index 14f58033efeb..ca2266b936ee 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -128,7 +128,7 @@
 
 			fixed-link {
 				speed = <1000>;
-				duplex-full;
+				full-duplex;
 			};
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index e678bc03d816..008de8ee2584 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -187,7 +187,7 @@
 
 			fixed-link {
 				speed = <1000>;
-				duplex-full;
+				full-duplex;
 			};
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm5301x.dtsi
index 5fc1b847f4aa..787a0dd8216b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm5301x.dtsi
@@ -542,7 +542,6 @@
 				  "spi_lr_session_done",
 				  "spi_lr_overread";
 		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53573.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm53573.dtsi
index 3f03a381db0f..eed1a6147f0b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm53573.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm53573.dtsi
@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
@@ -156,8 +159,6 @@
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts
index 16e70a264faf..458bb6e2f572 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/dove.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/dove.dtsi
index 00a36fba2fd2..9aee3cfd3e98 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/dove.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/dove.dtsi
@@ -139,7 +139,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/e60k02.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/e60k02.dtsi
index 935e2359f8df..07ae96486385 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/e60k02.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/e60k02.dtsi
@@ -302,6 +302,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/e70k02.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/e70k02.dtsi
index 27ef9a62b23c..a1f9fbd6004a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/e70k02.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/e70k02.dtsi
@@ -312,6 +312,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
index 6d2c7bb19184..2eb682009815 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -250,7 +250,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4.dtsi
index 5c4ecda27a47..7ba7a18c2500 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
index bba85011ecc9..53e023fc1cac 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -201,8 +201,8 @@
 			power-on-delay = <10>;
 			reset-delay = <10>;
 
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
+			panel-width-mm = <56>;
+			panel-height-mm = <93>;
 
 			display-timings {
 				timing {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4210.dtsi
index 2c25cc37934e..f8c6c5d1906a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4210.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4210.dtsi
@@ -393,7 +393,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 202ab0fee3b7..bfc79490e2e2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -182,7 +182,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5250.dtsi
index 4708dcd575a7..01751706ff96 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5250.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5250.dtsi
@@ -1107,7 +1107,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d1cbc6b8a570..e18110b93875 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -120,7 +120,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5420.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5420.dtsi
index 9f2523a873d9..62263eb91b3c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5420.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5420.dtsi
@@ -592,7 +592,7 @@
 		};
 
 		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
+			compatible = "samsung,exynos5420-mipi-video-phy";
 			syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 3de7019572a2..5e4280393706 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -31,7 +31,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -86,7 +86,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -130,7 +130,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -174,7 +174,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -218,7 +218,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index a6961ff24030..e6e7e2ff2a26 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +139,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +212,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +285,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +358,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx50-kobo-aura.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx50-kobo-aura.dts
index 51bf6117fb12..467db6b4ed7f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -26,7 +26,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
-		on {
+		led-on {
 			label = "kobo_aura:orange:on";
 			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
 			panic-indicator;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-cx9020.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-cx9020.dts
index cfb18849a92b..055d23a9aee7 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-cx9020.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-cx9020.dts
@@ -86,27 +86,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pwr-r {
+		led-pwr-r {
 			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		pwr-g {
+		led-pwr-g {
 			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		pwr-b {
+		led-pwr-b {
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		sd1-b {
+		led-sd1-b {
 			linux,default-trigger = "mmc0";
 			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		sd2-b {
+		led-sd2-b {
 			linux,default-trigger = "mmc1";
 			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-m53evk.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-m53evk.dts
index a1a6228d1aa6..2bd2432d317f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-m53evk.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-m53evk.dts
@@ -52,13 +52,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_gpio>;
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&gpio2 8 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&gpio2 9 0>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-m53menlo.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
index d5c68d1ea707..4d77b6077fc1 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -34,19 +34,19 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-user1 {
 			label = "TestLed601";
 			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user2 {
+		led-user2 {
 			label = "TestLed602";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		eth {
+		led-eth {
 			label = "EthLedYe";
 			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "netdev";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-ppd.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-ppd.dts
index 37d0cffea99c..70c4a4852256 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-ppd.dts
@@ -488,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-tx53.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-tx53.dtsi
index fe9ded4650da..b16a0c1a29cf 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-tx53.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -94,7 +94,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_stk5led>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-usbarmory.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-usbarmory.dts
index f34993a490ee..acc44010d510 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx53-usbarmory.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -67,7 +67,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "LED";
 			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
index 337db29b0010..37697fac9dea 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -211,17 +211,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
 
-		alarm1 {
+		led-alarm1 {
 			label = "alarm:red";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		alarm2 {
+		led-alarm2 {
 			label = "alarm:yellow";
 			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
 		};
 
-		alarm3 {
+		led-alarm3 {
 			label = "alarm:blue";
 			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-prtrvt.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-prtrvt.dts
index 56bb1ca56a2d..36b031236e47 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -124,6 +124,10 @@
 	status = "disabled";
 };
 
+&usbotg {
+	disable-over-current;
+};
+
 &vpu {
 	status = "disabled";
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts
index e7be05f205d3..24c7f535f63b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -25,14 +25,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 52162e8c7274..aacbf317feea 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -274,7 +274,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		chan@0 {
+		led@0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
@@ -282,7 +282,7 @@
 			color = <LED_COLOR_ID_RED>;
 		};
 
-		chan@1 {
+		led@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
@@ -290,7 +290,7 @@
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
-		chan@2 {
+		led@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts
index e894faba571f..522a51042965 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -34,20 +34,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-h100.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-h100.dts
index b8feadbff967..6406ade14f57 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-h100.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-h100.dts
@@ -76,19 +76,19 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_leds>;
 
-		led0: power {
+		led0: led-power {
 			label = "power";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		led1: stream {
+		led1: led-stream {
 			label = "stream";
 			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led2: rec {
+		led2: led-rec {
 			label = "rec";
 			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-kp.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-kp.dtsi
index 1ade0bff681d..5e0ed5560040 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-kp.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -66,14 +66,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			label = "led1";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "gpio";
 			default-state = "off";
 		};
 
-		red {
+		led-red {
 			label = "led0";
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "gpio";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-marsboard.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-marsboard.dts
index cc1801002394..2c9961333b0a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-marsboard.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -73,14 +73,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-user1 {
 			label = "imx6:green:user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "imx6:green:user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-tbs2910.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-tbs2910.dts
index 8daef65d5bb3..2f576e2ce73f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -49,7 +49,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		blue {
+		led-blue {
 			label = "blue_status_led";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-emcon.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 7228b894a763..ee2dd75cead6 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -46,14 +46,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_som_leds>;
 
-		green {
+		led-green {
 			label = "som:green";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "som:red";
 			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 069c27fab432..e75e1a5364b8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 728810b9d677..47d9a8d08197 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -80,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 6c0c109046d8..fb1d29abe099 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -80,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index a9b04f9f1c2b..4e20cb97058e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -81,20 +81,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw551x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 435dec6338fe..0fa4b8eeddee 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -115,7 +115,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 			default-state = "on";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw552x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 2e61102ae694..77ae611b817a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -72,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw553x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index 4662408b225a..7f16c602cc07 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -113,14 +113,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..46cf4080fec3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -139,20 +139,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -632,7 +632,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5903.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 1fdb7ba630f1..a74cde050158 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -123,7 +123,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5904.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 612b6e068e28..9fc79af2bc9a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -120,20 +120,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5907.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index fcd3bdfd6182..955a51226eda 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 6bb4855d13ce..218d6e667ed2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -74,20 +74,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5912.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 0415bcb41640..40e235e315cc 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -72,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 696427b487f0..82f47c295b08 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index 78555a618851..7b7e6c2ad190 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -209,6 +209,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index a53a5d0766a5..6d4eab1942b9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -85,31 +85,31 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
-		j14-pin1 {
+		led-j14-pin1 {
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j14-pin3 {
+		led-j14-pin3 {
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j14-pins8-9 {
+		led-j14-pins8-9 {
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j46-pin2 {
+		led-j46-pin2 {
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j46-pin3 {
+		led-j46-pin3 {
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 57c21a01f126..81a9a302aec1 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -181,13 +181,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		speaker-enable {
+		led-speaker-enable {
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		ttymxc4-rs232 {
+		led-ttymxc4-rs232 {
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
 			retain-state-suspended;
 			default-state = "on";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 120d6e997a4c..1ca4d219609f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -25,17 +25,17 @@
 		pinctrl-0 = <&pinctrl_gpioleds>;
 		status = "disabled";
 
-		red {
+		led-red {
 			label = "phyboard-mira:red";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "phyboard-mira:green";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "phyboard-mira:blue";
 			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -182,7 +182,7 @@
 		pinctrl-0 = <&pinctrl_rtc_int>;
 		reg = <0x68>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		status = "disabled";
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 768bc0e3a2b3..80adb2a02cc9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -47,12 +47,12 @@
 		pinctrl-0 = <&pinctrl_leds>;
 		compatible = "gpio-leds";
 
-		led_green: green {
+		led_green: led-green {
 			label = "phyflex:green";
 			gpios = <&gpio1 30 0>;
 		};
 
-		led_red: red {
+		led_red: led-red {
 			label = "phyflex:red";
 			gpios = <&gpio2 31 0>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-prti6q.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index f0db0d4471f4..36f84f4da6b0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -69,6 +69,7 @@
 	vbus-supply = <&reg_usb_h1_vbus>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -78,10 +79,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-rex.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-rex.dtsi
index de514eb5aa99..f804ff95a6ad 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -55,7 +55,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		led0: usr {
+		led0: led-usr {
 			label = "usr";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3dbb460ef102..10886a1461bf 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -21,7 +21,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 37482a9023fc..bcb83d52e26e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -130,7 +130,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		red {
+		led-red {
 			gpios = <&gpio1 2 0>;
 			default-state = "on";
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index c096d25a6f5b..1e0a041e9f60 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -73,13 +73,13 @@
 			default-state = "off";
 		};
 
-		en-usb-5v {
+		en-usb-5v-led {
 			label = "en-usb-5v";
 			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sel_dc_usb {
+		sel-dc-usb-led {
 			label = "sel_dc_usb";
 			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-tx6.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f41f86a76ea9..a197bac95cba 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -92,7 +92,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_user_led>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-evk.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sl-evk.dts
index f16c830f1e91..dc5d596c18db 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-evk.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sl-evk.dts
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index 663ee9df79e6..d6eee157c63b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -597,6 +597,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sll-evk.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sll-evk.dts
index 32b3d82fec53..269092ac881c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sll-evk.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sll-evk.dts
@@ -37,7 +37,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sll.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sll.dtsi
index 897e24f5dca4..ca56e47854d0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sll.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sll.dtsi
@@ -552,7 +552,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
-				phy-reg_3p0-supply = <&reg_3p0>;
+				phy-3p0-supply = <&reg_3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sx-sabreauto.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 83ee97252ff1..b0c27b9b0244 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -20,7 +20,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index c84ea1fac5e9..725d0b5cb55f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -15,14 +15,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			label = "udoo-neo:red:mmc";
 			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		orange {
+		led-orange {
 			label = "udoo-neo:orange:user";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sx.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sx.dtsi
index e88a679cfa9f..5f41def13485 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6sx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6sx.dtsi
@@ -981,6 +981,8 @@
 					 <&clks IMX6SX_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -993,6 +995,8 @@
 					 <&clks IMX6SX_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -1005,6 +1009,8 @@
 					 <&clks IMX6SX_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 3cddc68917a0..e4d2652a75c0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -30,7 +30,7 @@
 		pinctrl-0 = <&pinctrl_gpioleds_som>;
 		compatible = "gpio-leds";
 
-		phycore-green {
+		led-phycore-green {
 			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
index 162dc259edc8..5a74c7f68eb6 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-tx6ul.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index 15ee0275feaf..70cef5e817bd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -131,7 +131,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_led>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
index 5162fe227d1e..fdc10563f147 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -52,7 +52,7 @@
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index d917dc4f2f22..6ad39dca7009 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
index 104a85254adb..5afb1674e012 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -64,7 +64,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-sdb.dts
index f483bc0afe5e..234e5fc647b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-sdb.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-sdb.dts
@@ -205,7 +205,7 @@
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
 		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-smegw01.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
index 546268b8d0b1..c0f00f5db11e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -198,6 +198,7 @@
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
 	dr_mode = "host";
 	status = "okay";
 };
@@ -374,7 +375,7 @@
 
 	pinctrl_usbotg2: usbotg2grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x04
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/imx7s.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7s.dtsi
index 0ebf39915c91..65cef32086aa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/imx7s.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/imx7s.dtsi
@@ -513,7 +513,7 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
 
@@ -1184,6 +1184,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1198,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1212,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 03caea6fc6ff..4351c5a02fa5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
 
-		pwms = <&pwm3 0 5000000 0>;
+		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 0097e72e3fb2..f4df4cc1dfa5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -18,6 +18,8 @@
 
 	gpio-restart {
 		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
 		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
@@ -39,7 +41,7 @@
 	status = "okay";
 
 	spi3: spi@400 {
-		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
 		pinctrl-names = "default";
 		status = "okay";
 		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
@@ -59,6 +61,12 @@
 		function = "miim_c";
 	};
 
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
 	sgpio_a_pins: sgpio-a-pins {
 		/* SCK, D0, D1 */
 		pins = "GPIO_32", "GPIO_33", "GPIO_34";
@@ -71,6 +79,12 @@
 		function = "sgpio_b";
 	};
 
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
 	usart0_pins: usart0-pins {
 		/* RXD, TXD */
 		pins = "GPIO_25", "GPIO_26";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index d3da8b1b473b..e0cbac500e17 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -59,7 +59,7 @@
 		};
 	};
 
-	pwm10: dmtimer-pwm {
+	pwm10: pwm-10 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/meson8.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/meson8.dtsi
index 0f8bac8bac8b..f9da7faa2186 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/meson8.dtsi
@@ -749,13 +749,13 @@
 
 &uart_B {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/meson8b.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/meson8b.dtsi
index cf9c04a61ba3..d3e0f085904d 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/meson8b.dtsi
@@ -737,13 +737,13 @@
 
 &uart_B {
 	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/motorola-mapphone-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index c7a1f3ffc48c..d69f0f4b4990 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -133,7 +133,7 @@
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
 
-	pwm8: dmtimer-pwm-8 {
+	pwm8: pwm-8 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_direction_pin>;
 
@@ -143,7 +143,7 @@
 		ti,clock-source = <0x01>;
 	};
 
-	pwm9: dmtimer-pwm-9 {
+	pwm9: pwm-9 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_enable_pin>;
 
@@ -352,13 +352,13 @@
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */
-	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
+	hdmi_hpd_gpio: hdmi-hpd-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
 		>;
 	};
 
-	hdq_pins: pinmux_hdq_pins {
+	hdq_pins: hdq-pins {
 		pinctrl-single,pins = <
 		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
 		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
@@ -366,7 +366,7 @@
 	};
 
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
 		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
@@ -380,7 +380,7 @@
 	 * devices. Off mode value should be tested if we have off mode working
 	 * later on.
 	 */
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
 		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
@@ -406,40 +406,40 @@
 	};
 
 	/* gpmc_ncs0.gpio_50 */
-	poweroff_gpio: pinmux_poweroff_pins {
+	poweroff_gpio: poweroff-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
 		>;
 	};
 
 	/* kpd_row0.gpio_178 */
-	tmp105_irq: pinmux_tmp105_irq {
+	tmp105_irq: tmp105-irq-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
 		>;
 	};
 
-	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
+	usb_gpio_mux_sel1: usb-gpio-mux-sel1-pins {
 		/* gpio_60 */
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
 		>;
 	};
 
-	touchscreen_pins: pinmux_touchscreen_pins {
+	touchscreen_pins: touchscreen-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
 		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
 		>;
 	};
 
-	als_proximity_pins: pinmux_als_proximity_pins {
+	als_proximity_pins: als-proximity-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
 		>;
 	};
 
-	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
+	usb_mdm6600_pins: usb-mdm6600-pins {
 		pinctrl-single,pins = <
 		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
 		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
@@ -476,7 +476,7 @@
 		>;
 	};
 
-	usb_ulpi_pins: pinmux_usb_ulpi_pins {
+	usb_ulpi_pins: usb-ulpi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, MUX_MODE7)
 		OMAP4_IOPAD(0x198, MUX_MODE7)
@@ -496,7 +496,7 @@
 	};
 
 	/* usb0_otg_dp and usb0_otg_dm */
-	usb_utmi_pins: pinmux_usb_utmi_pins {
+	usb_utmi_pins: usb-utmi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
 		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
@@ -521,7 +521,7 @@
 	 * when not used. If needed, we can add rts pin remux later based
 	 * on power measurements.
 	 */
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
 		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
@@ -538,7 +538,7 @@
 	};
 
 	/* uart3_tx_irtx and uart3_rx_irrx */
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, MUX_MODE7)
 		OMAP4_IOPAD(0x198, MUX_MODE7)
@@ -557,7 +557,7 @@
 		>;
 	};
 
-	uart4_pins: pinmux_uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
 		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
@@ -566,7 +566,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
 		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
@@ -575,7 +575,7 @@
 		>;
 	};
 
-	mcbsp3_pins: pinmux_mcbsp3_pins {
+	mcbsp3_pins: mcbsp3-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
 		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
@@ -584,13 +584,13 @@
 		>;
 	};
 
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
+	vibrator_direction_pin: vibrator-direction-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
 		>;
 	};
 
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
+	vibrator_enable_pin: vibrator-enable-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
 		>;
@@ -598,7 +598,7 @@
 };
 
 &omap4_pmx_wkup {
-	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+	usb_gpio_mux_sel2: usb-gpio-mux-sel2-pins {
 		/* gpio_wk0 */
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
@@ -614,12 +614,12 @@
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 &timer9 {
 	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 /*
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index d10669fcd527..9e9eba8bad5e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index 491606c4f044..2a394cc15284 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -142,7 +142,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index a0c2d7652625..f7b38bee039b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 3dad32834e5e..f53d45fa1de8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 132e702281fc..87359ab05db3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,7 +107,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index ce6c235f68ec..3046ec572632 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -8,9 +8,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index e7534fe9c53c..bc8961f3690f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -12,9 +12,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cm-t3517.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-cm-t3517.dts
index 3b8349094baa..f25c0a84a190 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -11,12 +11,12 @@
 	model = "CompuLab CM-T3517";
 	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
 
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7d..51baedf1603b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cpu-thermal.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
index 0da759f8e2c2..7dd2340bc5e4 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -12,8 +12,7 @@ cpu_thermal: cpu-thermal {
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;
 
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap>;
 
 	cpu_trips: trips {
 		cpu_alert0: cpu_alert {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6c..a7f99ae0c1fe 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
index 28a6a9345be5..e0be0fb23f80 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -147,7 +147,7 @@
 		pinctrl-0 = <&backlight_pins>;
 	};
 
-	pwm11: dmtimer-pwm {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
@@ -332,7 +332,7 @@
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
-       };
+	};
 
 	gps_pins: pinmux_gps_pins {
 		pinctrl-single,pins = <
@@ -612,6 +612,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
@@ -853,8 +869,8 @@
 };
 
 &hdqw1w {
-        pinctrl-names = "default";
-        pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
 };
 
 /* image signal processor within OMAP3 SoC */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
index 9db9fe67cd63..95df45cc70c0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -5,9 +5,11 @@
 
 #include "omap3-gta04a5.dts"
 
-&omap3_pmx_core {
+/ {
 	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
 
+&omap3_pmx_core {
 	gpmc_pins: pinmux_gpmc_pins {
 		pinctrl-single,pins = <
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-ldp.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-ldp.dts
index 36fc8805e0c1..85f33bbb566f 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-ldp.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-ldp.dts
@@ -301,5 +301,5 @@
 
 &vaux1 {
 	/* Needed for ads7846 */
-        regulator-name = "vcc";
+	regulator-name = "vcc";
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index c595afe4181d..d310b5c7bac3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-n900.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-n900.dts
index dd7971556449..89ab08d83261 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-n900.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-n900.dts
@@ -156,7 +156,7 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	pwm9: dmtimer-pwm {
+	pwm9: pwm-9 {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
 		ti,timers = <&timer9>;
@@ -236,27 +236,27 @@
 		pinctrl-single,pins = <
 
 			/* address lines */
-                        OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-                        OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-                        OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 
 			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-                        OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-                        OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-                        OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-                        OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-                        OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-                        OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-                        OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-                        OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 
 			/*
 			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 			 */
-                        OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+			>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
@@ -738,12 +738,12 @@
 
 	si4713: si4713@63 {
 		compatible = "silabs,si4713";
-                reg = <0x63>;
+		reg = <0x63>;
 
-                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
-                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
-                vio-supply = <&vio>;
-                vdd-supply = <&vaux1>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+		vio-supply = <&vio>;
+		vdd-supply = <&vaux1>;
 	};
 
 	bq24150a: bq24150a@6b {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb3..c3570acc35fa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790..d95a0e130058 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 559853764487..4c3b6bab179c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-zoom3.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-zoom3.dts
index 0482676d1830..ce58b1f208e8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap3-zoom3.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap3-zoom3.dts
@@ -23,9 +23,9 @@
 	};
 
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
@@ -84,28 +84,28 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
@@ -205,22 +205,22 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &uart4 {
-       status = "disabled";
+	status = "disabled";
 };
 
 &usb_otg_hs {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-cpu-thermal.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index 4d7eeb133dad..d484ec1e4fd8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -12,21 +12,24 @@ cpu_thermal: cpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
 	polling-delay = <1000>; /* milliseconds */
 
-			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
+	/*
+	 * See 44xx files for single sensor addressing, omap5 and dra7 need
+	 * also sensor ID for addressing.
+	 */
+	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
+		cpu_alert0: cpu_alert {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
 
 	cpu_cooling_maps: cooling-maps {
 		map0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-duovero-parlor.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-duovero-parlor.dts
index b294c22177cb..6d1beb453234 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -62,33 +62,33 @@
 			&smsc_pins
 	>;
 
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	smsc_pins: pinmux_smsc_pins {
+	smsc_pins: smsc-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
 			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
@@ -96,7 +96,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-duovero.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-duovero.dtsi
index 805dfd40030d..b8af455b411a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-duovero.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -73,14 +73,14 @@
 			&hsusbb1_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
@@ -89,7 +89,7 @@
 		>;
 	};
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
@@ -106,34 +106,34 @@
 		>;
 	};
 
-	hsusb1phy_pins: pinmux_hsusb1phy_pins {
+	hsusb1phy_pins: hsusb1phy-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
 		>;
 	};
 
-	w2cbw0015_pins: pinmux_w2cbw0015_pins {
+	w2cbw0015_pins: w2cbw0015-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
 			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
 			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
@@ -144,7 +144,7 @@
 		>;
 	};
 
-	mmc5_pins: pinmux_mmc5_pins {
+	mmc5_pins: mmc5-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
 			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-kc1.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-kc1.dts
index e59d17b25a1d..c6b79ba8bbc9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-kc1.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-kc1.dts
@@ -35,42 +35,42 @@
 &omap4_pmx_core {
 	pinctrl-names = "default";
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx */
 			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
 			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
@@ -85,7 +85,7 @@
 		>;
 	};
 
-	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+	usb_otg_hs_pins: usb-otg-hs-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* usba0_otg_ce */
 			OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dp */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-mcpdm.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-mcpdm.dtsi
index 915a9b31a33b..03ade47431fb 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-mcpdm.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-mcpdm.dtsi
@@ -7,7 +7,7 @@
  */
 
 &omap4_pmx_core {
-	mcpdm_pins: pinmux_mcpdm_pins {
+	mcpdm_pins: mcpdm-pins {
 		pinctrl-single,pins = <
 		/* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
 		OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-panda-common.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-panda-common.dtsi
index 518652a599bd..53b99004b19c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -237,14 +237,14 @@
 			&hsusbb1_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
@@ -253,7 +253,7 @@
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
 			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
@@ -288,13 +288,13 @@
 		>;
 	};
 
-	tfp410_pins: pinmux_tfp410_pins {
+	tfp410_pins: tfp410-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
@@ -302,7 +302,7 @@
 		>;
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
+	tpd12s015_pins: tpd12s015-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
 			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
@@ -310,7 +310,7 @@
 		>;
 	};
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
@@ -327,28 +327,28 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
@@ -359,7 +359,7 @@
 	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
 	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
 	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
 			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
@@ -369,7 +369,7 @@
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
+	wl12xx_pins: wl12xx-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
 			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
@@ -382,7 +382,7 @@
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
 		>;
@@ -390,7 +390,7 @@
 };
 
 &omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
+	led_wkgpio_pins: leds-wkpins-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
 			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-panda-es.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-panda-es.dts
index 7c6886cd738f..6c08dff58bea 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-panda-es.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-panda-es.dts
@@ -38,26 +38,26 @@
 };
 
 &omap4_pmx_core {
-	led_gpio_pins: gpio_led_pmx {
+	led_gpio_pins: gpio-led-pmx-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
 
-	bt_pins: pinmux_bt_pins {
+	bt_pins: bt-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
 			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
 			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-sdp.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-sdp.dts
index 9e976140f34a..b2cb93edbc3a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-sdp.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-sdp.dts
@@ -214,7 +214,7 @@
 			&tpd12s015_pins
 	>;
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
@@ -223,7 +223,7 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
 			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
@@ -232,21 +232,21 @@
 		>;
 	};
 
-	uart4_pins: pinmux_uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
 			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	dmic_pins: pinmux_dmic_pins {
+	dmic_pins: dmic-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
 			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
@@ -255,7 +255,7 @@
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
@@ -264,7 +264,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
 			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
@@ -273,7 +273,7 @@
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
 			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
@@ -282,7 +282,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
@@ -290,7 +290,7 @@
 		>;
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
+	tpd12s015_pins: tpd12s015-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
 			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
@@ -298,28 +298,28 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
@@ -327,14 +327,14 @@
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
+	wl12xx_pins: wl12xx-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
 			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
@@ -347,13 +347,13 @@
 	};
 
 	/* gpio_48 for ENET_ENABLE */
-	enet_enable_gpio: pinmux_enet_enable_gpio {
+	enet_enable_gpio: enet-enable-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
 		>;
 	};
 
-	ks8851_pins: pinmux_ks8851_pins {
+	ks8851_pins: ks8851-pins {
 		pinctrl-single,pins = <
 			/* ENET_INT */
 			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-var-om44customboard.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index 458cb53dd3d1..cadc7e02592b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -60,7 +60,7 @@
 };
 
 &omap4_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
 			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
@@ -69,7 +69,7 @@
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
 			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
@@ -78,13 +78,13 @@
 		>;
 	};
 
-	mcasp_pins: pinmux_mcsasp_pins {
+	mcasp_pins: mcsasp-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
 			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
@@ -117,7 +117,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
@@ -125,14 +125,14 @@
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	mmc5_pins: pinmux_mmc5_pins {
+	mmc5_pins: mmc5-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
 			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
@@ -144,32 +144,32 @@
 		>;
 	};
 
-	gpio_led_pins: pinmux_gpio_led_pins {
+	gpio_led_pins: gpio-led-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
 			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
 		>;
 	};
 
-	gpio_key_pins: pinmux_gpio_key_pins {
+	gpio_key_pins: gpio-key-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
 		>;
 	};
 
-	ks8851_irq_pins: pinmux_ks8851_irq_pins {
+	ks8851_irq_pins: ks8851-irq-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
 		>;
 	};
 
-	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
+	hdmi_hpd_pins: hdmi-hpd-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
 		>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index d0032213101e..de779d2d7c3e 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -19,7 +19,7 @@
 };
 
 &omap4_pmx_core {
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
@@ -28,7 +28,7 @@
 		>;
 	};
 
-	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
+	wl12xx_ctrl_pins: wl12xx-ctrl-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
 			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
@@ -36,7 +36,7 @@
 		>;
 	};
 
-	mmc4_pins: pinmux_mmc4_pins {
+	mmc4_pins: mmc4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
 			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-var-som-om44.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 334cbbaa5b8b..37d56b3010cf 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -65,21 +65,21 @@
 			&hsusbb1_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	tsc2004_pins: pinmux_tsc2004_pins {
+	tsc2004_pins: tsc2004-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
 			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
 			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
@@ -88,7 +88,7 @@
 		>;
 	};
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
@@ -105,27 +105,27 @@
 		>;
 	};
 
-	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
+	hsusbb1_phy_rst_pins: hsusbb1-phy-rst-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -144,19 +144,19 @@
 		&lan7500_rst_pins
 	>;
 
-	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
+	hsusbb1_phy_clk_pins: hsusbb1-phy-clk-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
 		>;
 	};
 
-	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
+	hsusbb1_hub_rst_pins: hsusbb1-hub-rst-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
 		>;
 	};
 
-	lan7500_rst_pins: pinmux_lan7500_rst_pins {
+	lan7500_rst_pins: lan7500-rst-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
 		>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap443x.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap443x.dtsi
index 238aceb799f8..2104170fe2cd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap443x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap443x.dtsi
@@ -69,6 +69,7 @@
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <0 20000>;
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap4460.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4460.dtsi
index 1b27a862ae81..a6764750d447 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap4460.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap4460.dtsi
@@ -79,6 +79,7 @@
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <348 (-9301)>;
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/omap5-cm-t54.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a58..af288d63a26a 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -84,36 +84,36 @@
 	};
 
 	lcd0: display {
-                compatible = "startek,startek-kd050c", "panel-dpi";
-                label = "lcd";
-
-                pinctrl-names = "default";
-                pinctrl-0 = <&lcd_pins>;
-
-                enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
-                panel-timing {
-                        clock-frequency = <33000000>;
-                        hactive = <800>;
-                        vactive = <480>;
-                        hfront-porch = <40>;
-                        hback-porch = <40>;
-                        hsync-len = <43>;
-                        vback-porch = <29>;
-                        vfront-porch = <13>;
-                        vsync-len = <3>;
-                        hsync-active = <0>;
-                        vsync-active = <0>;
-                        de-active = <1>;
-                        pixelclk-active = <1>;
-                };
-
-                port {
-                        lcd_in: endpoint {
-                                remote-endpoint = <&dpi_lcd_out>;
-                        };
-                };
-        };
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
 
 	hdmi0: connector0 {
 		compatible = "hdmi-connector";
@@ -354,7 +354,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
@@ -644,8 +644,8 @@
 };
 
 &usb3 {
-       extcon = <&extcon_usb3>;
-       vbus-supply = <&smps10_out1_reg>;
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
 };
 
 &cpu0 {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index 193569f0ca5f..4bdadb7681c3 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -26,6 +26,16 @@
 	};
 
 	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
 		adsp_region: adsp@3300000 {
 			reg = <0x03300000 0x1400000>;
 			no-map;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
index 942aa2278355..4b57e9f5bc64 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1271,7 +1271,7 @@
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-320000000 {
+				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 				};
 
@@ -1615,7 +1615,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 91716298ec5e..be1ab7eff8ff 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -23,6 +23,10 @@
 	status = "okay";
 };
 
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
 &blsp2_i2c5 {
 	status = "okay";
 	clock-frequency = <200000>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index 44cd72f1b1be..116e59a3b76d 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -19,16 +19,16 @@
 		serial@f995e000 {
 			status = "okay";
 		};
+	};
+};
 
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-		};
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
 
-		sdhci@f98a4900 {
-			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-			bus-width = <4>;
-		};
-	};
+&sdhc_2 {
+	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
index f2fb7c975af8..69da87577ad0 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -419,7 +419,7 @@
 			status = "disabled";
 		};
 
-		mmc@f9824900 {
+		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc", "core";
@@ -432,7 +432,7 @@
 			status = "disabled";
 		};
 
-		mmc@f98a4900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc", "core";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 79b0c6318e52..0993f840d1fc 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -11,9 +11,9 @@
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	status = "okay";
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index a63b3778636d..468ebc40d2ad 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -102,10 +102,10 @@
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 0107f552f520..7ef635997efa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -65,11 +65,11 @@
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b23591110bd2..b5e0ed4923b5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -228,9 +228,12 @@
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
 			status = "disabled";
 		};
 
@@ -426,8 +429,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 90c08b51680a..0ce58cff3016 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1085,8 +1085,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1136,8 +1136,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1187,8 +1187,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
index 7a9be0acf3f5..c4b2e9ac2494 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -300,7 +300,7 @@
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
-			rpm_requests: rpm_requests {
+			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8974";
 				qcom,smd-channels = "rpm_requests";
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 3f45f5c5d37b..cc49bb777df8 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -124,15 +124,15 @@
 
 		syna,startup-delay-ms = <10>;
 
-		rmi-f01@1 {
+		rmi4-f01@1 {
 			reg = <0x1>;
-			syna,nosleep = <1>;
+			syna,nosleep-mode = <1>;
 		};
 
-		rmi-f11@11 {
+		rmi4-f11@11 {
 			reg = <0x11>;
-			syna,f11-flip-x = <1>;
 			syna,sensor-type = <1>;
+			touchscreen-inverted-x;
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
index c72540223fa9..a4bf1d5ee206 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -303,6 +303,45 @@
 			status = "disabled";
 		};
 
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux", "cfg", "bus_master", "bus_slave",
+				      "slave_q2a", "sleep", "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global", "doorbell";
+			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		pcie0_phy: phy@1c07000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
 			reg = <0x01c07000 0x1c4>;
@@ -400,45 +439,6 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@40000000 {
-			compatible = "qcom,sdx55-pcie-ep";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40200000 0x100000>,
-			      <0x01c03000 0x3000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
-				    "mmio";
-
-			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
-
-			clocks = <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux", "cfg", "bus_master", "bus_slave",
-				      "slave_q2a", "sleep", "ref";
-
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global", "doorbell";
-			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "core";
-			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie0_lane>;
-			phy-names = "pciephy";
-			max-link-speed = <3>;
-			num-lanes = <2>;
-
-			status = "disabled";
-		};
-
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;
@@ -577,7 +577,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
index 4cd405db5500..ecb9171e4da5 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -455,7 +455,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/rk3288.dtsi
index 487b0e03d4b4..511ca864c1b2 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/rk3288.dtsi
@@ -942,7 +942,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -1181,6 +1181,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/s3c6410-mini6410.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/s3c6410-mini6410.dts
index 17097da36f5e..0b07b3c31960 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -51,7 +51,7 @@
 
 		ethernet@18000000 {
 			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
 			interrupt-parent = <&gpn>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			davicom,no-eeprom;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/s5pv210-smdkv210.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/s5pv210-smdkv210.dts
index fbae768d65e2..901e7197b136 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -41,7 +41,7 @@
 
 	ethernet@a8000000 {
 		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
 		interrupt-parent = <&gph1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 		local-mac-address = [00 00 de ad be ef];
@@ -55,6 +55,14 @@
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_out>;
+		power-supply = <&dc5v_reg>;
+	};
+
+	dc5v_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "DC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/s5pv210.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/s5pv210.dtsi
index 12e90a1cc6a1..1a9e4a96b2ff 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/s5pv210.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/s5pv210.dtsi
@@ -566,7 +566,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/sam9x60.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/sam9x60.dtsi
index 8f5477e307dd..37a5d96aaf64 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/sam9x60.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/sam9x60.dtsi
@@ -564,7 +564,7 @@
 			mpddrc: mpddrc@ffffe800 {
 				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/spear320-hmi.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/spear320-hmi.dts
index 34503ac9c51c..721e5ee7b680 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/spear320-hmi.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/spear320-hmi.dts
@@ -241,7 +241,7 @@
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/spear600.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..9d5a04a46b14 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/spear600.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 2aa94605d3d4..d52a7aaa1074 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -178,7 +178,7 @@
 				tsin-num = <0>;
 				serial-not-parallel;
 				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
 				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 8f37aefa7315..000278ec2c58 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -284,6 +284,88 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp131.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp131.dtsi
index dd35a607073d..723787f72cfd 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp131.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp131.dtsi
@@ -405,6 +405,7 @@
 
 			part_number_otp: part_number_otp@4 {
 				reg = <0x4 0x2>;
+				bits = <0 12>;
 			};
 			ts_cal1: calib@5c {
 				reg = <0x5c 0x2>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index a9d2bec99014..e15a3b2a9b39 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2448,19 +2463,4 @@
 			bias-disable;
 		};
 	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
index d865ab5d866b..dd23de85100c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -101,8 +101,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
index 30156b7546ed..fd89542c69c9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -68,11 +68,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@dc000000 {
-			reg = <0xdc000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led: gpio_leds {
@@ -102,9 +97,11 @@
 	adc1: adc@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&adc1_in6_pins_a>;
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <6>;
 		status = "disabled";
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 
 	adc2: adc@100 {
@@ -173,7 +170,7 @@
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -183,10 +180,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -375,8 +368,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	interrupt-names = "wdg";
@@ -391,8 +384,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-ev1.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 050c3c27a420..b72d5e8aa466 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -144,7 +144,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index e8d2ec41d537..cb00ce7cec8b 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -112,7 +112,7 @@
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 2d9461006810..cf7485251490 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -62,11 +62,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -80,11 +75,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -240,8 +230,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index ed66d25b8bf3..a8b3f7a54703 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -41,7 +41,7 @@
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5f586f024060..38f46c2c83aa 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -137,10 +137,13 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		routing =
-			"MIC_IN", "Capture",
-			"Capture", "Mic Bias",
-			"Playback", "HP_OUT";
+		widgets = "Headphone", "Headphone Jack",
+			  "Line", "Line In Jack",
+			  "Microphone", "Microphone Jack";
+		routing = "Headphone Jack", "HP_OUT",
+			  "LINE_IN", "Line In Jack",
+			  "MIC_IN", "Microphone Jack",
+			  "Microphone Jack", "Mic Bias";
 		dais = <&sai2a_port &sai2b_port>;
 		status = "okay";
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 238a611192e7..74a11ccc5333 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -80,17 +80,19 @@
 	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
+};
 
-	adc1: adc@0 {
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <0>;
-		status = "okay";
+&adc1 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
 	};
+};
 
-	adc2: adc@100 {
-		st,adc-channels = <1>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+&adc2 {
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
 	};
 };
 
@@ -125,7 +127,7 @@
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -414,8 +416,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -428,8 +430,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 90933077d66d..b7ba43865514 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -88,7 +88,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "STM32MP1-AV96-HDMI";
+		label = "STM32-AV96-HDMI";
 		dais = <&sai2a_port>;
 		status = "okay";
 	};
@@ -100,7 +100,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -112,17 +112,39 @@
 	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
+};
 
-	adc1: adc@0 {
-		st,adc-channels = <0 1 6>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+&adc1 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
 	};
 
-	adc2: adc@100 {
-		st,adc-channels = <0 1 2>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@6 {
+		reg = <6>;
+		st,min-sample-time-ns = <5000>;
+	};
+};
+
+&adc2 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@2 {
+		reg = <2>;
+		st,min-sample-time-ns = <5000>;
 	};
 };
 
@@ -151,7 +173,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -322,6 +344,12 @@
 			};
 		};
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &ltdc {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
index 27477bb219de..39af79dc654c 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -78,7 +78,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -192,6 +192,12 @@
 		reg = <0x50>;
 		pagesize = <16>;
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &sdmmc1 {	/* MicroSD */
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 134a798ad3f2..bba19f21e527 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -213,12 +213,6 @@
 			status = "disabled";
 		};
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
 };
 
 &ipcc {
@@ -247,8 +241,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 8b48d3c89a04..73a6a7b278b9 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -141,7 +141,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -438,7 +438,7 @@
 	i2s2_port: port {
 		i2s2_endpoint: endpoint {
 			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
+			dai-format = "i2s";
 			mclk-fs = <256>;
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 43641cb82398..343b02b97155 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/twl6030_omap4.dtsi linux-libre-6.1.56-gnu/arch/arm/boot/dts/twl6030_omap4.dtsi
index 5730e46b0067..64e38c7c8be7 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -19,7 +19,7 @@
 };
 
 &omap4_pmx_wkup {
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+	twl6030_wkup_pins: twl6030-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
@@ -27,7 +27,7 @@
 };
 
 &omap4_pmx_core {
-	twl6030_pins: pinmux_twl6030_pins {
+	twl6030_pins: twl6030-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 3b88209bacea..ff1f9a1bcfcf 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -132,6 +132,7 @@
 		reg = <0x2c0f0000 0x1000>;
 		interrupts = <0 84 4>;
 		cache-level = <2>;
+		cache-unified;
 	};
 
 	pmu {
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 42ed4a04a12e..6280c5e86a12 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -345,7 +345,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts linux-libre-6.1.56-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..ba2001f37315 100644
--- linux-libre-6.1-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ linux-libre-6.1.56-gnu/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -340,7 +340,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git linux-libre-6.1-gnu/arch/arm/configs/bcm2835_defconfig linux-libre-6.1.56-gnu/arch/arm/configs/bcm2835_defconfig
index a51babd178c2..be0c984a6694 100644
--- linux-libre-6.1-gnu/arch/arm/configs/bcm2835_defconfig
+++ linux-libre-6.1.56-gnu/arch/arm/configs/bcm2835_defconfig
@@ -107,6 +107,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
+CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/assembler.h linux-libre-6.1.56-gnu/arch/arm/include/asm/assembler.h
index 90fbe4a3f9c8..84912b19cac8 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/assembler.h
+++ linux-libre-6.1.56-gnu/arch/arm/include/asm/assembler.h
@@ -402,6 +402,23 @@ ALT_UP_B(.L0_\@)
 #endif
 	.endm
 
+/*
+ * Raw SMP data memory barrier
+ */
+	.macro	__smp_dmb mode
+#if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
+	dmb	ish
+	.else
+	W(dmb)	ish
+	.endif
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#else
+	.error "Incompatible SMP platform"
+#endif
+	.endm
+
 #if defined(CONFIG_CPU_V7M)
 	/*
 	 * setmode is used to assert to be in svc mode during boot. For v7-M
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/bugs.h linux-libre-6.1.56-gnu/arch/arm/include/asm/bugs.h
index 97a312ba0840..fe385551edec 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/bugs.h
+++ linux-libre-6.1.56-gnu/arch/arm/include/asm/bugs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/include/asm/bugs.h
- *
  *  Copyright (C) 1995-2003 Russell King
  */
 #ifndef __ASM_BUGS_H
@@ -10,10 +8,8 @@
 extern void check_writebuffer_bugs(void);
 
 #ifdef CONFIG_MMU
-extern void check_bugs(void);
 extern void check_other_bugs(void);
 #else
-#define check_bugs() do { } while (0)
 #define check_other_bugs() do { } while (0)
 #endif
 
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/sync_bitops.h linux-libre-6.1.56-gnu/arch/arm/include/asm/sync_bitops.h
index 6f5d627c44a3..f46b3c570f92 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/sync_bitops.h
+++ linux-libre-6.1.56-gnu/arch/arm/include/asm/sync_bitops.h
@@ -14,14 +14,35 @@
  * ops which are SMP safe even on a UP kernel.
  */
 
+/*
+ * Unordered
+ */
+
 #define sync_set_bit(nr, p)		_set_bit(nr, p)
 #define sync_clear_bit(nr, p)		_clear_bit(nr, p)
 #define sync_change_bit(nr, p)		_change_bit(nr, p)
-#define sync_test_and_set_bit(nr, p)	_test_and_set_bit(nr, p)
-#define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
-#define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
 #define sync_test_bit(nr, addr)		test_bit(nr, addr)
-#define arch_sync_cmpxchg		arch_cmpxchg
 
+/*
+ * Fully ordered
+ */
+
+int _sync_test_and_set_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_set_bit(nr, p)	_sync_test_and_set_bit(nr, p)
+
+int _sync_test_and_clear_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_clear_bit(nr, p)	_sync_test_and_clear_bit(nr, p)
+
+int _sync_test_and_change_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_change_bit(nr, p)	_sync_test_and_change_bit(nr, p)
+
+#define arch_sync_cmpxchg(ptr, old, new)				\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__smp_mb__before_atomic();					\
+	__ret = arch_cmpxchg_relaxed((ptr), (old), (new));		\
+	__smp_mb__after_atomic();					\
+	__ret;								\
+})
 
 #endif
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/syscall.h linux-libre-6.1.56-gnu/arch/arm/include/asm/syscall.h
index dfeed440254a..fe4326d938c1 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/syscall.h
+++ linux-libre-6.1.56-gnu/arch/arm/include/asm/syscall.h
@@ -25,6 +25,9 @@ static inline int syscall_get_nr(struct task_struct *task,
 	if (IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))
 		return task_thread_info(task)->abi_syscall;
 
+	if (task_thread_info(task)->abi_syscall == -1)
+		return -1;
+
 	return task_thread_info(task)->abi_syscall & __NR_SYSCALL_MASK;
 }
 
diff --git linux-libre-6.1-gnu/arch/arm/include/asm/thread_info.h linux-libre-6.1.56-gnu/arch/arm/include/asm/thread_info.h
index aecc403b2880..7f092cb55a41 100644
--- linux-libre-6.1-gnu/arch/arm/include/asm/thread_info.h
+++ linux-libre-6.1.56-gnu/arch/arm/include/asm/thread_info.h
@@ -128,15 +128,16 @@ extern int vfp_restore_user_hwstate(struct user_vfp *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
-#define TIF_NOTIFY_SIGNAL	8	/* signal notifications exist */
+#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
 
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
+#define TIF_RESTORE_SIGMASK	19
+#define TIF_SYSCALL_TRACE	20	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	21	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	22	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		23	/* seccomp syscall filtering active */
+
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git linux-libre-6.1-gnu/arch/arm/kernel/bugs.c linux-libre-6.1.56-gnu/arch/arm/kernel/bugs.c
index 14c8dbbb7d2d..087bce6ec8e9 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/bugs.c
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/bugs.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/init.h>
+#include <linux/cpu.h>
 #include <asm/bugs.h>
 #include <asm/proc-fns.h>
 
@@ -11,7 +12,7 @@ void check_other_bugs(void)
 #endif
 }
 
-void __init check_bugs(void)
+void __init arch_cpu_finalize_init(void)
 {
 	check_writebuffer_bugs();
 	check_other_bugs();
diff --git linux-libre-6.1-gnu/arch/arm/kernel/entry-common.S linux-libre-6.1.56-gnu/arch/arm/kernel/entry-common.S
index 405a607b754f..b413b541c3c7 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/entry-common.S
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/entry-common.S
@@ -103,6 +103,7 @@ slow_work_pending:
 	cmp	r0, #0
 	beq	no_work_pending
 	movlt	scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
+	str	scno, [tsk, #TI_ABI_SYSCALL]	@ make sure tracers see update
 	ldmia	sp, {r0 - r6}			@ have to reload r0 - r6
 	b	local_restart			@ ... and off we go
 ENDPROC(ret_fast_syscall)
diff --git linux-libre-6.1-gnu/arch/arm/kernel/hw_breakpoint.c linux-libre-6.1.56-gnu/arch/arm/kernel/hw_breakpoint.c
index 054e9199f30d..dc0fb7a81371 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/hw_breakpoint.c
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/hw_breakpoint.c
@@ -626,7 +626,7 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
 	hw->address &= ~alignment_mask;
 	hw->ctrl.len <<= offset;
 
-	if (is_default_overflow_handler(bp)) {
+	if (uses_default_overflow_handler(bp)) {
 		/*
 		 * Mismatch breakpoints are required for single-stepping
 		 * breakpoints.
@@ -798,7 +798,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 * Otherwise, insert a temporary mismatch breakpoint so that
 		 * we can single-step over the watchpoint trigger.
 		 */
-		if (!is_default_overflow_handler(wp))
+		if (!uses_default_overflow_handler(wp))
 			continue;
 step:
 		enable_single_step(wp, instruction_pointer(regs));
@@ -811,7 +811,7 @@ step:
 		info->trigger = addr;
 		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
 		perf_bp_event(wp, regs);
-		if (is_default_overflow_handler(wp))
+		if (uses_default_overflow_handler(wp))
 			enable_single_step(wp, instruction_pointer(regs));
 	}
 
@@ -886,7 +886,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 			info->trigger = addr;
 			pr_debug("breakpoint fired: address = 0x%x\n", addr);
 			perf_bp_event(bp, regs);
-			if (is_default_overflow_handler(bp))
+			if (uses_default_overflow_handler(bp))
 				enable_single_step(bp, addr);
 			goto unlock;
 		}
diff --git linux-libre-6.1-gnu/arch/arm/kernel/machine_kexec.c linux-libre-6.1.56-gnu/arch/arm/kernel/machine_kexec.c
index f567032a09c0..6d1938d1b4df 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/machine_kexec.c
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/machine_kexec.c
@@ -92,16 +92,28 @@ void machine_crash_nonpanic_core(void *unused)
 	}
 }
 
+static DEFINE_PER_CPU(call_single_data_t, cpu_stop_csd) =
+	CSD_INIT(machine_crash_nonpanic_core, NULL);
+
 void crash_smp_send_stop(void)
 {
 	static int cpus_stopped;
 	unsigned long msecs;
+	call_single_data_t *csd;
+	int cpu, this_cpu = raw_smp_processor_id();
 
 	if (cpus_stopped)
 		return;
 
 	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
-	smp_call_function(machine_crash_nonpanic_core, NULL, false);
+	for_each_online_cpu(cpu) {
+		if (cpu == this_cpu)
+			continue;
+
+		csd = &per_cpu(cpu_stop_csd, cpu);
+		smp_call_function_single_async(cpu, csd);
+	}
+
 	msecs = 1000; /* Wait at most a second for the other cpus to stop */
 	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
 		mdelay(1);
diff --git linux-libre-6.1-gnu/arch/arm/kernel/module-plts.c linux-libre-6.1.56-gnu/arch/arm/kernel/module-plts.c
index 1fc309b41f94..8d809724cde5 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/module-plts.c
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/module-plts.c
@@ -256,7 +256,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		/* sort by type and symbol index */
 		sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
 
-		if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0)
+		if (!module_init_layout_section(secstrings + dstsec->sh_name))
 			core_plts += count_plts(syms, dstsec->sh_addr, rels,
 						numrels, s->sh_info);
 		else
diff --git linux-libre-6.1-gnu/arch/arm/kernel/ptrace.c linux-libre-6.1.56-gnu/arch/arm/kernel/ptrace.c
index bfe88c6e60d5..cef106913ab7 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/ptrace.c
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/ptrace.c
@@ -785,8 +785,9 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 
 		case PTRACE_SET_SYSCALL:
-			task_thread_info(child)->abi_syscall = data &
-							__NR_SYSCALL_MASK;
+			if (data != -1)
+				data &= __NR_SYSCALL_MASK;
+			task_thread_info(child)->abi_syscall = data;
 			ret = 0;
 			break;
 
diff --git linux-libre-6.1-gnu/arch/arm/kernel/unwind.c linux-libre-6.1.56-gnu/arch/arm/kernel/unwind.c
index a37ea6c772cd..2e6aa5dc15bf 100644
--- linux-libre-6.1-gnu/arch/arm/kernel/unwind.c
+++ linux-libre-6.1.56-gnu/arch/arm/kernel/unwind.c
@@ -307,6 +307,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -360,7 +383,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
diff --git linux-libre-6.1-gnu/arch/arm/lib/bitops.h linux-libre-6.1.56-gnu/arch/arm/lib/bitops.h
index 95bd35991288..f069d1b2318e 100644
--- linux-libre-6.1-gnu/arch/arm/lib/bitops.h
+++ linux-libre-6.1.56-gnu/arch/arm/lib/bitops.h
@@ -28,7 +28,7 @@ UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
 
-	.macro	testop, name, instr, store
+	.macro	__testop, name, instr, store, barrier
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
@@ -38,7 +38,7 @@ UNWIND(	.fnstart	)
 	mov	r0, r0, lsr #5
 	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
-	smp_dmb
+	\barrier
 #if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
 	.arch_extension	mp
 	ALT_SMP(W(pldw)	[r1])
@@ -50,13 +50,21 @@ UNWIND(	.fnstart	)
 	strex	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
-	smp_dmb
+	\barrier
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
+
+	.macro	testop, name, instr, store
+	__testop \name, \instr, \store, smp_dmb
+	.endm
+
+	.macro	sync_testop, name, instr, store
+	__testop \name, \instr, \store, __smp_dmb
+	.endm
 #else
 	.macro	bitop, name, instr
 ENTRY(	\name		)
diff --git linux-libre-6.1-gnu/arch/arm/lib/testchangebit.S linux-libre-6.1.56-gnu/arch/arm/lib/testchangebit.S
index 4ebecc67e6e0..f13fe9bc2399 100644
--- linux-libre-6.1-gnu/arch/arm/lib/testchangebit.S
+++ linux-libre-6.1.56-gnu/arch/arm/lib/testchangebit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_change_bit, eor, str
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_change_bit, eor, str
+#endif
diff --git linux-libre-6.1-gnu/arch/arm/lib/testclearbit.S linux-libre-6.1.56-gnu/arch/arm/lib/testclearbit.S
index 009afa0f5b4a..4d2c5ca620eb 100644
--- linux-libre-6.1-gnu/arch/arm/lib/testclearbit.S
+++ linux-libre-6.1.56-gnu/arch/arm/lib/testclearbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_clear_bit, bicne, strne
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_clear_bit, bicne, strne
+#endif
diff --git linux-libre-6.1-gnu/arch/arm/lib/testsetbit.S linux-libre-6.1.56-gnu/arch/arm/lib/testsetbit.S
index f3192e55acc8..649dbab65d8d 100644
--- linux-libre-6.1-gnu/arch/arm/lib/testsetbit.S
+++ linux-libre-6.1.56-gnu/arch/arm/lib/testsetbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_set_bit, orreq, streq
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_set_bit, orreq, streq
+#endif
diff --git linux-libre-6.1-gnu/arch/arm/lib/uaccess_with_memcpy.c linux-libre-6.1.56-gnu/arch/arm/lib/uaccess_with_memcpy.c
index 14eecaaf295f..e4c2677cc1e9 100644
--- linux-libre-6.1-gnu/arch/arm/lib/uaccess_with_memcpy.c
+++ linux-libre-6.1.56-gnu/arch/arm/lib/uaccess_with_memcpy.c
@@ -116,7 +116,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memcpy((void *)to, from, tocopy);
+		__memcpy((void *)to, from, tocopy);
 		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
@@ -178,7 +178,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memset((void *)addr, 0, tocopy);
+		__memset((void *)addr, 0, tocopy);
 		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
diff --git linux-libre-6.1-gnu/arch/arm/mach-at91/pm.c linux-libre-6.1.56-gnu/arch/arm/mach-at91/pm.c
index 60dc56d8acfb..437dd0352fd4 100644
--- linux-libre-6.1-gnu/arch/arm/mach-at91/pm.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-at91/pm.c
@@ -334,16 +334,14 @@ static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
 		pdev = of_find_device_by_node(eth->np);
 		if (!pdev)
 			return false;
+		/* put_device(eth->dev) is called at the end of suspend. */
 		eth->dev = &pdev->dev;
 	}
 
 	/* No quirks if device isn't a wakeup source. */
-	if (!device_may_wakeup(eth->dev)) {
-		put_device(eth->dev);
+	if (!device_may_wakeup(eth->dev))
 		return false;
-	}
 
-	/* put_device(eth->dev) is called at the end of suspend. */
 	return true;
 }
 
@@ -439,14 +437,14 @@ clk_unconfigure:
 				pr_err("AT91: PM: failed to enable %s clocks\n",
 				       j == AT91_PM_G_ETH ? "geth" : "eth");
 			}
-		} else {
-			/*
-			 * Release the reference to eth->dev taken in
-			 * at91_pm_eth_quirk_is_valid().
-			 */
-			put_device(eth->dev);
-			eth->dev = NULL;
 		}
+
+		/*
+		 * Release the reference to eth->dev taken in
+		 * at91_pm_eth_quirk_is_valid().
+		 */
+		put_device(eth->dev);
+		eth->dev = NULL;
 	}
 
 	return ret;
diff --git linux-libre-6.1-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c linux-libre-6.1.56-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
index dd4b164d1831..a9efa7bc2fa1 100644
--- linux-libre-6.1-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <asm/mach/time.h>
 #include "soc.h"
+#include "platform.h"
 
 /*************************************************************************
  * Timer handling for EP93xx
@@ -60,7 +61,7 @@ static u64 notrace ep93xx_read_sched_clock(void)
 	return ret;
 }
 
-u64 ep93xx_clocksource_read(struct clocksource *c)
+static u64 ep93xx_clocksource_read(struct clocksource *c)
 {
 	u64 ret;
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx25.c linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx25.c
index 3e63445cde06..cc86977d0a34 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx25.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx27.c linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx27.c
index bf70e13bbe9e..1d2893908368 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx27.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx27.c
@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx31.c linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx31.c
index b9c24b851d1a..35c544924e50 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx31.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx31.c
@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx35.c linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx35.c
index 80e7d8ab9f1b..1fe75b39c2d9 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx35.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx35.c
@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx5.c linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/cpu-imx5.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git linux-libre-6.1-gnu/arch/arm/mach-imx/mmdc.c linux-libre-6.1.56-gnu/arch/arm/mach-imx/mmdc.c
index af12668d0bf5..b9efe9da06e0 100644
--- linux-libre-6.1-gnu/arch/arm/mach-imx/mmdc.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-imx/mmdc.c
@@ -99,6 +99,7 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
@@ -433,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
 			.task_ctx_nr    = perf_invalid_context,
@@ -452,15 +451,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
 static int imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
 	iounmap(pmu_mmdc->mmdc_base);
@@ -474,7 +474,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
 	const struct of_device_id *of_id =
 		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -497,14 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
 
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
+
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -525,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
 pmu_free:
diff --git linux-libre-6.1-gnu/arch/arm/mach-mmp/time.c linux-libre-6.1.56-gnu/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..708816caf859 100644
--- linux-libre-6.1-gnu/arch/arm/mach-mmp/time.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-mmp/time.c
@@ -43,18 +43,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/Kconfig linux-libre-6.1.56-gnu/arch/arm/mach-omap1/Kconfig
index 538a960257cc..7ec7ada287e0 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/Kconfig
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/Kconfig
@@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
 	depends on ATAGS
+	select ARCH_OMAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select CLKSRC_MMIO
@@ -45,10 +46,6 @@ config ARCH_OMAP16XX
 	select CPU_ARM926T
 	select OMAP_DM_TIMER
 
-config ARCH_OMAP1_ANY
-	select ARCH_OMAP
-	def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX
-
 config ARCH_OMAP
 	bool
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/Makefile linux-libre-6.1.56-gnu/arch/arm/mach-omap1/Makefile
index 506074b86333..0615cb0ba580 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/Makefile
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/Makefile
@@ -3,8 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-ifdef CONFIG_ARCH_OMAP1_ANY
-
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
 	 serial.o devices.o dma.o omap-dma.o fb.o
@@ -59,5 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
-
-endif
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/gpio15xx.c linux-libre-6.1.56-gnu/arch/arm/mach-omap1/gpio15xx.c
index c675f11de99d..61fa26efd865 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/gpio15xx.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/gpio15xx.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-soc.h>
+#include <asm/irq.h>
 
 #include "irqs.h"
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/io.c linux-libre-6.1.56-gnu/arch/arm/mach-omap1/io.c
index d2db9b8aed3f..0074b011a05a 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/io.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/io.c
@@ -22,17 +22,14 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap_io_desc[] __initdata = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1_IO_VIRT,
 		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
 		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
-	}
-};
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
+	},
 	{
 		.virtual	= OMAP7XX_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
@@ -49,6 +46,12 @@ static struct map_desc omap7xx_io_desc[] __initdata = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	},
 	{
 		.virtual	= OMAP1510_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
@@ -65,6 +68,12 @@ static struct map_desc omap1510_io_desc[] __initdata = {
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 static struct map_desc omap16xx_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	},
 	{
 		.virtual	= OMAP16XX_DSP_BASE,
 		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
@@ -79,18 +88,9 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 };
 #endif
 
-/*
- * Maps common IO regions for omap1
- */
-static void __init omap1_map_common_io(void)
-{
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-}
-
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
 void __init omap7xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
 }
 #endif
@@ -98,7 +98,6 @@ void __init omap7xx_map_io(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 void __init omap15xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
 }
 #endif
@@ -106,7 +105,6 @@ void __init omap15xx_map_io(void)
 #if defined(CONFIG_ARCH_OMAP16XX)
 void __init omap16xx_map_io(void)
 {
-	omap1_map_common_io();
 	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
 }
 #endif
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/mcbsp.c linux-libre-6.1.56-gnu/arch/arm/mach-omap1/mcbsp.c
index 05c25c432449..b1632cbe37e6 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/mcbsp.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/mcbsp.c
@@ -89,7 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 struct resource omap7xx_mcbsp_res[][6] = {
 	{
 		{
@@ -159,14 +158,7 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 };
 #define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
 #define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-#else
-#define omap7xx_mcbsp_res_0		NULL
-#define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_RES_SZ		0
-#define OMAP7XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP15XX
 struct resource omap15xx_mcbsp_res[][6] = {
 	{
 		{
@@ -266,14 +258,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 };
 #define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
 #define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
-#else
-#define omap15xx_mcbsp_res_0		NULL
-#define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_RES_SZ		0
-#define OMAP15XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP16XX
 struct resource omap16xx_mcbsp_res[][6] = {
 	{
 		{
@@ -373,12 +358,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 };
 #define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
 #define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
-#else
-#define omap16xx_mcbsp_res_0		NULL
-#define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_RES_SZ		0
-#define OMAP16XX_MCBSP_COUNT		0
-#endif
 
 static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 			struct omap_mcbsp_platform_data *config, int size)
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/pm.h linux-libre-6.1.56-gnu/arch/arm/mach-omap1/pm.h
index d9165709c532..0d1f092821ff 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/pm.h
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/pm.h
@@ -106,13 +106,6 @@
 #define OMAP7XX_IDLECT3		0xfffece24
 #define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
 
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP850) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
-#warning "Power management for this processor not implemented yet"
-#endif
-
 #ifndef __ASSEMBLER__
 
 #include <linux/clk.h>
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap1/timer.c linux-libre-6.1.56-gnu/arch/arm/mach-omap1/timer.c
index f5cd4bbf7566..81a912c1145a 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap1/timer.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap1/timer.c
@@ -158,7 +158,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/board-generic.c linux-libre-6.1.56-gnu/arch/arm/mach-omap2/board-generic.c
index 1610c567a6a3..10d2f078e4a8 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/board-generic.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap2/board-generic.c
@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/omap4-common.c linux-libre-6.1.56-gnu/arch/arm/mach-omap2/omap4-common.c
index 6d1eb4eefefe..d9ed2a5dcd5e 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/omap4-common.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap2/omap4-common.c
@@ -140,6 +140,7 @@ static int __init omap4_sram_init(void)
 			__func__);
 	else
 		sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+	of_node_put(np);
 
 	return 0;
 }
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/powerdomain.c linux-libre-6.1.56-gnu/arch/arm/mach-omap2/powerdomain.c
index 2d747f6cffe8..0eca44fc1192 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/powerdomain.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap2/powerdomain.c
@@ -174,7 +174,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 		break;
 	case PWRDM_STATE_PREV:
 		prev = pwrdm_read_prev_pwrst(pwrdm);
-		if (pwrdm->state != prev)
+		if (prev >= 0 && pwrdm->state != prev)
 			pwrdm->state_counter[prev]++;
 		if (prev == PWRDM_POWER_RET)
 			_update_logic_membank_counters(pwrdm);
diff --git linux-libre-6.1-gnu/arch/arm/mach-omap2/timer.c linux-libre-6.1.56-gnu/arch/arm/mach-omap2/timer.c
index 620ba69c8f11..5677c4a08f37 100644
--- linux-libre-6.1-gnu/arch/arm/mach-omap2/timer.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git linux-libre-6.1-gnu/arch/arm/mach-orion5x/board-dt.c linux-libre-6.1.56-gnu/arch/arm/mach-orion5x/board-dt.c
index e3736ffc8347..be47492c6640 100644
--- linux-libre-6.1-gnu/arch/arm/mach-orion5x/board-dt.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-orion5x/board-dt.c
@@ -60,6 +60,9 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
+	if (of_machine_is_compatible("lacie,d2-network"))
+		d2net_init();
+
 	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
diff --git linux-libre-6.1-gnu/arch/arm/mach-orion5x/common.h linux-libre-6.1.56-gnu/arch/arm/mach-orion5x/common.h
index eb96009e21c4..b9cfdb456456 100644
--- linux-libre-6.1-gnu/arch/arm/mach-orion5x/common.h
+++ linux-libre-6.1.56-gnu/arch/arm/mach-orion5x/common.h
@@ -75,6 +75,12 @@ extern void mss2_init(void);
 static inline void mss2_init(void) {}
 #endif
 
+#ifdef CONFIG_MACH_D2NET_DT
+void d2net_init(void);
+#else
+static inline void d2net_init(void) {}
+#endif
+
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
diff --git linux-libre-6.1-gnu/arch/arm/mach-pxa/sharpsl_pm.c linux-libre-6.1.56-gnu/arch/arm/mach-pxa/sharpsl_pm.c
index a829baf8d922..05c0a0f6fe63 100644
--- linux-libre-6.1-gnu/arch/arm/mach-pxa/sharpsl_pm.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-pxa/sharpsl_pm.c
@@ -220,8 +220,6 @@ void sharpsl_battery_kick(void)
 {
 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 }
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
diff --git linux-libre-6.1-gnu/arch/arm/mach-pxa/spitz.c linux-libre-6.1.56-gnu/arch/arm/mach-pxa/spitz.c
index 9964729cd428..937f56bbaf6c 100644
--- linux-libre-6.1-gnu/arch/arm/mach-pxa/spitz.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-pxa/spitz.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -510,17 +509,6 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
@@ -548,7 +536,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.kick_battery		= spitz_bl_kick_battery,
+	.kick_battery		= sharpsl_battery_kick,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
diff --git linux-libre-6.1-gnu/arch/arm/mach-s3c/s3c64xx.c linux-libre-6.1.56-gnu/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe..dce2b0e95308 100644
--- linux-libre-6.1-gnu/arch/arm/mach-s3c/s3c64xx.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-s3c/s3c64xx.c
@@ -173,7 +173,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
-void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
 {
 	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
diff --git linux-libre-6.1-gnu/arch/arm/mach-sa1100/jornada720_ssp.c linux-libre-6.1.56-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..9627c4cf3e41 100644
--- linux-libre-6.1-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
  *  arch/arm/mac-sa1100/jornada720_ssp.c
  *
  *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
@@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags;
 
 /**
  * jornada_ssp_reverse - reverses input byte
+ * @byte: input byte to reverse
  *
  * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
@@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
 
 /**
  * jornada_ssp_byte - waits for ready ssp bus and sends byte
+ * @byte: input byte to transmit
  *
  * waits for fifo buffer to clear and then transmits, if it doesn't then we will
  * timeout after <timeout> rounds. Needs mcu running before its called.
@@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
 
 /**
  * jornada_ssp_inout - decide if input is command or trading byte
+ * @byte: input byte to send (may be %TXDUMMY)
  *
  * returns : (jornada_ssp_byte(byte)) on success
  *         : %-ETIMEDOUT on timeout failure
diff --git linux-libre-6.1-gnu/arch/arm/mach-zynq/slcr.c linux-libre-6.1.56-gnu/arch/arm/mach-zynq/slcr.c
index 37707614885a..9765b3f4c2fc 100644
--- linux-libre-6.1-gnu/arch/arm/mach-zynq/slcr.c
+++ linux-libre-6.1.56-gnu/arch/arm/mach-zynq/slcr.c
@@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
 	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
 	if (IS_ERR(zynq_slcr_regmap)) {
 		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm/mm/fault.c linux-libre-6.1.56-gnu/arch/arm/mm/fault.c
index de988cba9a4b..b0db85310331 100644
--- linux-libre-6.1-gnu/arch/arm/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/arm/mm/fault.c
@@ -231,37 +231,11 @@ static inline bool is_permission_fault(unsigned int fsr)
 	return false;
 }
 
-static vm_fault_t __kprobes
-__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int flags,
-		unsigned long vma_flags, struct pt_regs *regs)
-{
-	struct vm_area_struct *vma = find_vma(mm, addr);
-	if (unlikely(!vma))
-		return VM_FAULT_BADMAP;
-
-	if (unlikely(vma->vm_start > addr)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN))
-			return VM_FAULT_BADMAP;
-		if (addr < FIRST_USER_ADDRESS)
-			return VM_FAULT_BADMAP;
-		if (expand_stack(vma, addr))
-			return VM_FAULT_BADMAP;
-	}
-
-	/*
-	 * ok, we have a good vm_area for this memory access, check the
-	 * permissions on the VMA allow for the fault which occurred.
-	 */
-	if (!(vma->vm_flags & vma_flags))
-		return VM_FAULT_BADACCESS;
-
-	return handle_mm_fault(vma, addr & PAGE_MASK, flags, regs);
-}
-
 static int __kprobes
 do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
 	int sig, code;
 	vm_fault_t fault;
 	unsigned int flags = FAULT_FLAG_DEFAULT;
@@ -300,31 +274,21 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
-	/*
-	 * As per x86, we may deadlock here.  However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
-	 */
-	if (!mmap_read_trylock(mm)) {
-		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
-			goto no_context;
 retry:
-		mmap_read_lock(mm);
-	} else {
-		/*
-		 * The above down_read_trylock() might have succeeded in
-		 * which case, we'll have missed the might_sleep() from
-		 * down_read()
-		 */
-		might_sleep();
-#ifdef CONFIG_DEBUG_VM
-		if (!user_mode(regs) &&
-		    !search_exception_tables(regs->ARM_pc))
-			goto no_context;
-#endif
+	vma = lock_mm_and_find_vma(mm, addr, regs);
+	if (unlikely(!vma)) {
+		fault = VM_FAULT_BADMAP;
+		goto bad_area;
 	}
 
-	fault = __do_page_fault(mm, addr, flags, vm_flags, regs);
+	/*
+	 * ok, we have a good vm_area for this memory access, check the
+	 * permissions on the VMA allow for the fault which occurred.
+	 */
+	if (!(vma->vm_flags & vm_flags))
+		fault = VM_FAULT_BADACCESS;
+	else
+		fault = handle_mm_fault(vma, addr & PAGE_MASK, flags, regs);
 
 	/* If we need to retry but a fatal signal is pending, handle the
 	 * signal first. We do not need to release the mmap_lock because
@@ -355,6 +319,7 @@ retry:
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+bad_area:
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
diff --git linux-libre-6.1-gnu/arch/arm/mm/nommu.c linux-libre-6.1.56-gnu/arch/arm/mm/nommu.c
index c1494a4dee25..53f2d8774fdb 100644
--- linux-libre-6.1-gnu/arch/arm/mm/nommu.c
+++ linux-libre-6.1.56-gnu/arch/arm/mm/nommu.c
@@ -161,7 +161,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	mpu_setup();
 
 	/* allocate the zero page. */
-	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 	if (!zero_page)
 		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
 		      __func__, PAGE_SIZE, PAGE_SIZE);
diff --git linux-libre-6.1-gnu/arch/arm/nwfpe/Makefile linux-libre-6.1.56-gnu/arch/arm/nwfpe/Makefile
index 303400fa2cdf..2aec85ab1e8b 100644
--- linux-libre-6.1-gnu/arch/arm/nwfpe/Makefile
+++ linux-libre-6.1.56-gnu/arch/arm/nwfpe/Makefile
@@ -11,3 +11,9 @@ nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
+
+# Try really hard to avoid generating calls to __aeabi_uldivmod() from
+# float64_rem() due to loop elision.
+ifdef CONFIG_CC_IS_CLANG
+CFLAGS_softfloat.o	+= -mllvm -replexitval=never
+endif
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/checkers-common.c linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/checkers-common.c
index 4d720990cf2a..eba7ac4725c0 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/checkers-common.c
+++ linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/checkers-common.c
@@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn,
  * Different from other insn uses imm8, the real addressing offset of
  * STRD in T32 encoding should be imm8 * 4. See ARMARM description.
  */
-enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
+static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
 		struct arch_probes_insn *asi,
 		const struct decode_header *h)
 {
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/core.c linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/core.c
index 9090c3a74dcc..d8238da095df 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/core.c
+++ linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/core.c
@@ -233,7 +233,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
  * kprobe, and that level is reserved for user kprobe handlers, so we can't
  * risk encountering a new kprobe in an interrupt handler.
  */
-void __kprobes kprobe_handler(struct pt_regs *regs)
+static void __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p, *cur;
 	struct kprobe_ctlblk *kcb;
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/opt-arm.c linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/opt-arm.c
index dbef34ed933f..7f65048380ca 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/opt-arm.c
+++ linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/opt-arm.c
@@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
 	}
 }
 
-extern void kprobe_handler(struct pt_regs *regs);
-
 static void
 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.c linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/test-core.c
index c562832b8627..171c7076b89f 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.c
+++ linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/test-core.c
@@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = {
 	[REG_TYPE_NOSPPCX]	= COVERAGE_ANY_REG | COVERAGE_SP,
 };
 
-unsigned coverage_start_registers(const struct decode_header *h)
+static unsigned coverage_start_registers(const struct decode_header *h)
 {
 	unsigned regs = 0;
 	int i;
diff --git linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.h linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/test-core.h
index 56ad3c0aaeea..c7297037c162 100644
--- linux-libre-6.1-gnu/arch/arm/probes/kprobes/test-core.h
+++ linux-libre-6.1.56-gnu/arch/arm/probes/kprobes/test-core.h
@@ -454,3 +454,7 @@ void kprobe_thumb32_test_cases(void);
 #else
 void kprobe_arm_test_cases(void);
 #endif
+
+void __kprobes_test_case_start(void);
+void __kprobes_test_case_end_16(void);
+void __kprobes_test_case_end_32(void);
diff --git linux-libre-6.1-gnu/arch/arm64/Kconfig linux-libre-6.1.56-gnu/arch/arm64/Kconfig
index 505c8a1ccbe0..d5eb2fbab473 100644
--- linux-libre-6.1-gnu/arch/arm64/Kconfig
+++ linux-libre-6.1.56-gnu/arch/arm64/Kconfig
@@ -98,7 +98,6 @@ config ARM64
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
@@ -212,6 +211,7 @@ config ARM64
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select KASAN_VMALLOC if KASAN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
@@ -376,6 +376,25 @@ menu "Kernel Features"
 
 menu "ARM errata workarounds via the alternatives framework"
 
+config AMPERE_ERRATUM_AC03_CPU_38
+        bool "AmpereOne: AC03_CPU_38: Certain bits in the Virtualization Translation Control Register and Translation Control Registers do not follow RES0 semantics"
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  erratum AC03_CPU_38 on AmpereOne.
+
+	  The affected design reports FEAT_HAFDBS as not implemented in
+	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
+	  as required by the architecture. The unadvertised HAFDBS
+	  implementation suffers from an additional erratum where hardware
+	  A/D updates can occur after a PTE has been marked invalid.
+
+	  The workaround forces KVM to explicitly set VTCR_EL2.HA to 0,
+	  which avoids enabling unadvertised hardware Access Flag management
+	  at stage-2.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 48424e459f12..15b5651b88d0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -128,7 +128,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 847a7c01f5af..fcf640de90b6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -141,7 +141,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index 5836b0030931..e1605a9b0a13 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -168,15 +168,15 @@
 		reg = <0x32 0x20>;
 	};
 
-	eth_mac: eth_mac@0 {
+	eth_mac: eth-mac@0 {
 		reg = <0x0 0x6>;
 	};
 
-	bt_mac: bt_mac@6 {
+	bt_mac: bt-mac@6 {
 		reg = <0x6 0x6>;
 	};
 
-	wifi_mac: wifi_mac@c {
+	wifi_mac: wifi-mac@c {
 		reg = <0xc 0x6>;
 	};
 
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 
 	/* RTC */
-	pcf8563: pcf8563@51 {
+	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		status = "okay";
@@ -303,7 +303,7 @@
 
 &usb {
 	status = "okay";
-	phy-supply = <&usb_pwr>;
+	vbus-supply = <&usb_pwr>;
 };
 
 &spicc1 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04f797b5a012..6cc685f91fc9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -152,7 +152,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: clock-controller {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -161,7 +161,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1885,7 +1885,7 @@
 			sd_emmc_b: sd@5000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,
 					<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -1897,7 +1897,7 @@
 			sd_emmc_c: mmc@7000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
 					<&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..88b848c65b0d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1571,10 +1571,9 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x400>;
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
 
 				canvas: video-lut@48 {
 					compatible = "amlogic,canvas";
@@ -1694,7 +1693,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					internal_ephy: ethernet_phy@8 {
+					internal_ephy: ethernet-phy@8 {
 						compatible = "ethernet-phy-id0180.3301",
 							     "ethernet-phy-ieee802.3-c22";
 						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -2318,7 +2317,7 @@
 		sd_emmc_a: sd@ffe03000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe03000 0x0 0x800>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_A>,
 				 <&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2330,7 +2329,7 @@
 		sd_emmc_b: sd@ffe05000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe05000 0x0 0x800>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_B>,
 				 <&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2342,7 +2341,7 @@
 		sd_emmc_c: mmc@ffe07000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe07000 0x0 0x800>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_C>,
 				 <&clkc CLKID_SD_EMMC_C_CLK0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index e3bb6df42ff3..cf0a9be83fc4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -401,5 +401,4 @@
 
 &usb {
 	status = "okay";
-	dr_mode = "host";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..6eaceb717d61 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -57,26 +57,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index bcdf55f48a83..4e84ab87cc7d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -17,7 +17,7 @@
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		update-button {
+		button-update {
 			label = "update";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <1300000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 023a52005494..80d86780cb6b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -232,7 +232,7 @@
 			reg = <0x14 0x10>;
 		};
 
-		eth_mac: eth_mac@34 {
+		eth_mac: eth-mac@34 {
 			reg = <0x34 0x10>;
 		};
 
@@ -249,7 +249,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi_clocks@0 {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -531,7 +531,7 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 
-			hwrng: rng {
+			hwrng: rng@0 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x0 0x0 0x4>;
 			};
@@ -602,21 +602,21 @@
 			sd_emmc_a: mmc@70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc@72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc@74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6d8cc00fedc7..5f2d4317ecfb 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -16,7 +16,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9ef210f17b4a..393d3cb33b9e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -18,7 +18,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led {
 			label = "n1:white:status";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
index b331a013572f..c490dbbf063b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -79,6 +79,5 @@
 		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-		clock-names = "lpo";
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6831137c5c10..a18d6d241a5a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -86,11 +86,11 @@
 };
 
 &efuse {
-	bt_mac: bt_mac@6 {
+	bt_mac: bt-mac@6 {
 		reg = <0x6 0x6>;
 	};
 
-	wifi_mac: wifi_mac@C {
+	wifi_mac: wifi-mac@c {
 		reg = <0xc 0x6>;
 	};
 };
@@ -239,7 +239,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c_b_pins>;
 
-	pcf8563: pcf8563@51 {
+	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c3ac531c4f84..350022935052 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -759,7 +759,7 @@
 		};
 	};
 
-	eth-phy-mux {
+	eth-phy-mux@55c {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index cadba194b149..38ebe98ba9c6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -17,13 +17,13 @@
 	compatible = "bananapi,bpi-m5", "amlogic,sm1";
 	model = "Banana Pi BPI-M5";
 
-	adc_keys {
+	adc-keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 2>;
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		key {
+		button-sw3 {
 			label = "SW3";
 			linux,code = <BTN_3>;
 			press-threshold-microvolt = <1700000>;
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index e3486f60645a..3d642d739c35 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -76,9 +76,17 @@
 };
 
 &cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
 	cooling-maps {
 		map {
-			trip = <&cpu_passive>;
+			trip = <&cpu_active>;
 			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j274.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j274.dts
index c1f3ba9c39f6..997ef90614c1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j274.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -33,10 +33,12 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -44,6 +46,14 @@
 	};
 };
 
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts
index ecb10d237a05..3fd444ac8ae4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -21,21 +21,6 @@
 	brcm,board-type = "apple,honshu";
 };
 
-/*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
-};
-
-&pcie0_dart_2 {
-	status = "disabled";
-};
-
-/delete-node/ &port01;
-/delete-node/ &port02;
-
 &i2c2 {
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j313.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j313.dts
index df741737b8e6..9399c42de8a4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j313.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -20,18 +20,3 @@
 &wifi0 {
 	brcm,board-type = "apple,shikoku";
 };
-
-/*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
-};
-
-&pcie0_dart_2 {
-	status = "disabled";
-};
-
-/delete-node/ &port01;
-/delete-node/ &port02;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j456.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j456.dts
index 8c6bf9592510..d80223fa4229 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -51,13 +51,23 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
 };
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts
index fe7c0aaf7d62..e24ccb49e33c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -33,6 +33,7 @@
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -40,12 +41,6 @@
 	};
 };
 
-/*
- * Remove unused PCIe port and disable the associated DART.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
+&pcie0_dart_2 {
+	status = "okay";
 };
-
-/delete-node/ &port01;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
index 51a63b29d404..84fd1b1b48f6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -412,7 +412,7 @@
 			resets = <&ps_ans2>;
 		};
 
-		pcie0_dart_0: dart@681008000 {
+		pcie0_dart_0: iommu@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -421,22 +421,24 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_1: dart@682008000 {
+		pcie0_dart_1: iommu@682008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x82008000 0x0 0x4000>;
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
 		};
 
-		pcie0_dart_2: dart@683008000 {
+		pcie0_dart_2: iommu@683008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x83008000 0x0 0x4000>;
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
 		};
 
 		pcie0: pcie@690000000 {
@@ -511,6 +513,7 @@
 						<0 0 0 2 &port01 0 0 0 1>,
 						<0 0 0 3 &port01 0 0 0 2>,
 						<0 0 0 4 &port01 0 0 0 3>;
+				status = "disabled";
 			};
 
 			port02: pci@2,0 {
@@ -530,6 +533,7 @@
 						<0 0 0 2 &port02 0 0 0 1>,
 						<0 0 0 3 &port02 0 0 0 2>,
 						<0 0 0 4 &port02 0 0 0 3>;
+				status = "disabled";
 			};
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
index 839ca33178b0..d94a53d68320 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -120,7 +120,7 @@
 };
 
 &leds {
-	led-power@11 {
+	led@11 {
 		reg = <0x11>;
 		function = LED_FUNCTION_POWER;
 		color = <LED_COLOR_ID_WHITE>;
@@ -130,7 +130,7 @@
 		pinctrl-0 = <&pins_led_17_a>;
 	};
 
-	led-wan-red@12 {
+	led@12 {
 		reg = <0x12>;
 		function = LED_FUNCTION_WAN;
 		color = <LED_COLOR_ID_RED>;
@@ -139,7 +139,7 @@
 		pinctrl-0 = <&pins_led_18_a>;
 	};
 
-	led-wps@14 {
+	led@14 {
 		reg = <0x14>;
 		function = LED_FUNCTION_WPS;
 		color = <LED_COLOR_ID_WHITE>;
@@ -148,7 +148,7 @@
 		pinctrl-0 = <&pins_led_20_a>;
 	};
 
-	led-wan-white@15 {
+	led@15 {
 		reg = <0x15>;
 		function = LED_FUNCTION_WAN;
 		color = <LED_COLOR_ID_WHITE>;
@@ -157,7 +157,7 @@
 		pinctrl-0 = <&pins_led_21_a>;
 	};
 
-	led-lan@19 {
+	led@19 {
 		reg = <0x19>;
 		function = LED_FUNCTION_LAN;
 		color = <LED_COLOR_ID_WHITE>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index dac9d3b4e91d..df7134854206 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -253,7 +253,7 @@
 			};
 		};
 
-		procmon: syscon@280000 {
+		procmon: bus@280000 {
 			compatible = "simple-bus";
 			reg = <0x280000 0x1000>;
 			ranges;
@@ -532,7 +532,7 @@
 			reg = <0x1800 0x600>, <0x2000 0x10>;
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
+			interrupt-names = "nand_ctlrdy";
 			status = "okay";
 
 			nandcs: nand@0 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/Makefile linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/Makefile
index 3ea9edc87909..ac6f780dc191 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/Makefile
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 5a8d85a7d161..bbdf989058ff 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9b726c2a4842..dda27ed7aaf2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -89,7 +89,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index b2fcbba60d3a..3b0ed9305f2b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -88,7 +88,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..d4867d6cf47c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index f598669e742f..52c5a43b30a0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -103,7 +103,7 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3d9647b3da14..537cecb13dd0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index d7b4229bb4a2..9ad56aaf19b4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -26,6 +26,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
 		status = "disabled";
 	};
@@ -36,6 +38,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
 		status = "disabled";
 	};
@@ -46,6 +50,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
 		status = "disabled";
 	};
@@ -56,6 +62,8 @@ dma_subsys: bus@5a000000 {
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
 		status = "disabled";
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index ca2a43e0cbf6..3af4c7636974 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -99,8 +99,6 @@
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -113,6 +111,10 @@
 			reg = <0>;
 			eee-broken-1000t;
 			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index 5ddbda0b4def..f2c4d13b2f3c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -157,7 +157,7 @@
 
 		sc_pwrkey: keys {
 			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycode = <KEY_POWER>;
+			linux,keycodes = <KEY_POWER>;
 			wakeup-source;
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 03266bd90a06..169f047fbca5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -120,7 +120,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -316,7 +316,7 @@
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 7d6317d95b13..1dd0617477fd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -193,7 +193,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..0e8f0d7161ad 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index 4a3df2b77b0b..6720ddf59783 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -141,7 +141,7 @@
 };
 
 &gpio1 {
-	gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT",
+	gpio-line-names = "", "LED_RED", "WDOG_INT", "X_RTC_INT",
 		"", "", "", "RESET_ETHPHY",
 		"CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
 		"USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 995b44efb1b6..9d9b103c79c7 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -111,7 +111,7 @@
 };
 
 &gpio1 {
-	gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT",
+	gpio-line-names = "", "", "WDOG_INT", "X_RTC_INT",
 		"", "", "", "RESET_ETHPHY",
 		"", "", "nENABLE_FLATLINK";
 };
@@ -210,7 +210,7 @@
 				};
 			};
 
-			reg_vdd_gpu: buck3 {
+			reg_vdd_vpu: buck3 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <1000000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index 83c8f715cd90..b1f11098d248 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -602,7 +602,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
index 3ea73a6886ff..f6ad1a4b8b66 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
@@ -33,7 +33,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
index 2fa635e1c1a8..1f8ea20dfafc 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
@@ -33,7 +33,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 244ef8d6cc68..7761d5671cb1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -222,7 +222,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
 	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index d3ee6fc4baab..5a770c8b777e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -721,7 +721,6 @@
 	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -737,7 +736,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -746,7 +744,6 @@
 	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
 	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -759,6 +756,7 @@
 &usbotg2 {
 	dr_mode = "host";
 	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 31f4c735fe4f..ba0b3f507855 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -651,7 +651,6 @@
 	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
 	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -668,7 +667,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -686,7 +684,6 @@
 	dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 19f6d2943d26..7c9b60f4da92 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -559,6 +559,10 @@
 	status = "okay";
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 &pgc_mipi {
 	status = "disabled";
 };
@@ -572,7 +576,6 @@
 	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
index a67771d02146..46a07dfc0086 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -617,6 +617,10 @@
 	status = "okay";
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 &pgc_mipi {
 	status = "disabled";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index c2a5c2f7b204..7c3f5c54f040 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -9,6 +9,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
index 73cc3fafa018..b2bcd2282170 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -11,6 +11,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index bcab830c6e95..b4aef79650c6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -95,9 +95,10 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
@@ -134,7 +135,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 83f9a1329b1b..b8f242eb346f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -562,7 +562,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mm_uid: unique-id@410 {
+				imx8mm_uid: unique-id@4 {
 					reg = <0x4 0x8>;
 				};
 
@@ -1145,10 +1145,9 @@
 				compatible = "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e30000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
-						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
-							  <&clk IMX8MM_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
 				clock-frequency = <333000000>;
 				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
 					 <&clk IMX8MM_CLK_CSI1_ROOT>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 9e82069c941f..5a1f7c30afe5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -81,7 +81,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -202,7 +202,7 @@
 			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index 87b5e23c766f..faafefe562e4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -98,11 +98,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy@4 {
+		ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <4>;
 			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
+			/*
+			 * Deassert delay:
+			 * ADIN1300 requires 5ms.
+			 * AR8033   requires 1ms.
+			 */
+			reset-deassert-us = <20000>;
 		};
 	};
 };
@@ -345,7 +351,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
 		>;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index dd4302ac1de4..e7362d7615bd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -631,7 +631,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 015ab5078b65..a81fbe52e3c3 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -295,6 +295,7 @@
 				sai2: sai@30020000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -309,6 +310,7 @@
 				sai3: sai@30030000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -323,6 +325,7 @@
 				sai5: sai@30050000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -339,6 +342,7 @@
 				sai6: sai@30060000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -396,6 +400,7 @@
 				sai7: sai@300b0000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -563,7 +568,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mn_uid: unique-id@410 {
+				imx8mn_uid: unique-id@4 {
 					reg = <0x4 0x8>;
 				};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index b4c1ef2559f2..126c839b45f2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -36,8 +36,8 @@
 
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
 	};
 
 	reg_can1_stby: regulator-can1-stby {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index 79b290a002c1..ecc4bce6db97 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -99,7 +99,6 @@
 
 		regulators {
 			buck1: BUCK1 {
-				regulator-compatible = "BUCK1";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -108,7 +107,6 @@
 			};
 
 			buck2: BUCK2 {
-				regulator-compatible = "BUCK2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -119,7 +117,6 @@
 			};
 
 			buck4: BUCK4 {
-				regulator-compatible = "BUCK4";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -127,7 +124,6 @@
 			};
 
 			buck5: BUCK5 {
-				regulator-compatible = "BUCK5";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -135,7 +131,6 @@
 			};
 
 			buck6: BUCK6 {
-				regulator-compatible = "BUCK6";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -143,7 +138,6 @@
 			};
 
 			ldo1: LDO1 {
-				regulator-compatible = "LDO1";
 				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -151,7 +145,6 @@
 			};
 
 			ldo2: LDO2 {
-				regulator-compatible = "LDO2";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
@@ -159,7 +152,6 @@
 			};
 
 			ldo3: LDO3 {
-				regulator-compatible = "LDO3";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -167,13 +159,11 @@
 			};
 
 			ldo4: LDO4 {
-				regulator-compatible = "LDO4";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5: LDO5 {
-				regulator-compatible = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 06b4c93c5876..d68ef4f0726f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -611,7 +611,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index cefabe65b252..c8b521d45fca 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -12,7 +12,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_ETH";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 5dcd1de586b5..371144eb4018 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -86,7 +86,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -127,7 +127,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index a2f7969bec9d..2f5a8c0af4ff 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -424,7 +424,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mp_uid: unique-id@420 {
+				imx8mp_uid: unique-id@8 {
 					reg = <0x8 0x8>;
 				};
 
@@ -523,6 +523,7 @@
 				compatible = "fsl,imx8mp-gpc";
 				reg = <0x303a0000 0x1000>;
 				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
 
@@ -589,7 +590,7 @@
 						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_hsiomix: power-domains@17 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
 						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -1279,7 +1280,7 @@
 			reg = <0x32f10100 0x8>,
 			      <0x381f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1292,9 +1293,9 @@
 			usb_dwc3_0: usb@38100000 {
 				compatible = "snps,dwc3";
 				reg = <0x38100000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
@@ -1321,7 +1322,7 @@
 			reg = <0x32f10108 0x8>,
 			      <0x382f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1334,9 +1335,9 @@
 			usb_dwc3_1: usb@38200000 {
 				compatible = "snps,dwc3";
 				reg = <0x38200000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index ae08556b2ef2..1499d5d8bbc0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1299,7 +1299,6 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dr_mode = "otg";
-	snps,dis_u3_susphy_quirk;
 	usb-role-switch;
 	status = "okay";
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 9dda2a1554c3..8614c18b5998 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..6e6182709d22 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -339,7 +339,7 @@
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 674187e7252f..6d1d385d9f13 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -592,7 +592,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mq_uid: soc-uid@410 {
+				imx8mq_uid: soc-uid@4 {
 					reg = <0x4 0x8>;
 				};
 
@@ -756,7 +756,7 @@
 									 <&clk IMX8MQ_SYS1_PLL_800M>,
 									 <&clk IMX8MQ_VPU_PLL>;
 						assigned-clock-rates = <600000000>,
-								       <600000000>,
+								       <300000000>,
 								       <800000000>,
 								       <0>;
 					};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index ce9d3f0b98fc..607cd6b4e972 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -82,8 +82,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
-	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 07d8dd8160f6..afa883389456 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 69786c326db0..27f9a9f33134 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -74,7 +74,7 @@
 
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17fe
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
 			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
 			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
 			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
@@ -84,7 +84,7 @@
 			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
 			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
 			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
-			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
 
@@ -102,7 +102,7 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
 			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
 			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
 			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index 0247866fc86b..c2f60d41d6fd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -150,6 +150,8 @@
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -160,6 +162,8 @@
 			lpi2c2: i2c@44350000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -250,7 +254,7 @@
 
 			anatop: anatop@44480000 {
 				compatible = "fsl,imx93-anatop", "syscon";
-				reg = <0x44480000 0x10000>;
+				reg = <0x44480000 0x2000>;
 			};
 		};
 
@@ -277,6 +281,8 @@
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -287,6 +293,8 @@
 			lpi2c4: i2c@42540000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -351,6 +359,8 @@
 			lpi2c5: i2c@426b0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -361,6 +371,8 @@
 			lpi2c6: i2c@426c0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -371,6 +383,8 @@
 			lpi2c7: i2c@426d0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -381,6 +395,8 @@
 			lpi2c8: i2c@426e0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 44ed6f963b75..8e2ac687a410 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -97,7 +97,7 @@
 
 			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0x11000 0x100>;
+				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index ada164d423f3..200f97e1c4c9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -125,9 +125,12 @@
 	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 0>; /* GPIO2_5 */
 	};
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 9b1af9c80130..d31a194124c9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -50,7 +50,7 @@
 		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index e6d7453e56e0..1ac0b2cf3d40 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -266,7 +266,7 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..dde9ce137b4f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -117,7 +117,7 @@
 		compatible = "simple-bus";
 		ranges;
 
-		gic: interrupt-controller@0c000000 {
+		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
 			interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@0c53a650 {
+		sysirq: intpol-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..c3677d77e0a4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 146e18b5b1f4..7bb316922a3a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -435,6 +435,7 @@
 	pwm: pwm@11006000 {
 		compatible = "mediatek,mt7622-pwm";
 		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_PWM_SEL>,
 			 <&pericfg CLK_PERI_PWM_PD>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 72e0d9722e07..fc338bd497f5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -14,7 +14,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator@0 {
+	clk40m: oscillator-40m {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
 		#clock-cells = <0>;
@@ -112,6 +112,12 @@
 			#clock-cells = <1>;
 		};
 
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
 		topckgen: topckgen@1001b000 {
 			compatible = "mediatek,mt7986-topckgen", "syscon";
 			reg = <0 0x1001B000 0 0x1000>;
@@ -119,8 +125,7 @@
 		};
 
 		watchdog: watchdog@1001c000 {
-			compatible = "mediatek,mt7986-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt7986-wdt";
 			reg = <0 0x1001c000 0 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#reset-cells = <1>;
@@ -168,7 +173,7 @@
 			#clock-cells = <1>;
 		};
 
-		trng: trng@1020f000 {
+		trng: rng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
@@ -228,12 +233,6 @@
 			 #reset-cells = <1>;
 		};
 
-		wed_pcie: wed-pcie@10003000 {
-			compatible = "mediatek,mt7986-wed-pcie",
-				     "syscon";
-			reg = <0 0x10003000 0 0x10>;
-		};
-
 		wed0: wed@15010000 {
 			compatible = "mediatek,mt7986-wed",
 				     "syscon";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 9b334ecee7d6..b517bd58a62c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -297,6 +297,10 @@
 	};
 };
 
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
 	sram-supply = <&mt6358_vsram_gpu_reg>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index a70b669c49ba..268a1f28af8c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -585,6 +585,15 @@
 		method = "smc";
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -968,8 +977,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_CLK13M>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		iommu: iommu@10205000 {
@@ -1678,7 +1686,7 @@
 				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-names = "job", "mmu", "gpu";
 
-			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
 
 			power-domains =
 				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 64693c17af9e..f88d660e4154 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -47,14 +47,12 @@
 				core5 {
 					cpu = <&cpu5>;
 				};
-			};
 
-			cluster1 {
-				core0 {
+				core6 {
 					cpu = <&cpu6>;
 				};
 
-				core1 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -211,10 +209,12 @@
 		};
 	};
 
-	clk13m: oscillator-13m {
-		compatible = "fixed-clock";
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
-		clock-frequency = <13000000>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
 		clock-output-names = "clk13m";
 	};
 
@@ -330,8 +330,7 @@
 		};
 
 		watchdog: watchdog@10007000 {
-			compatible = "mediatek,mt8186-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt8186-wdt";
 			mediatek,disable-extrst;
 			reg = <0 0x10007000 0 0x1000>;
 			#reset-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 7a5e2d2ad3e3..ab16fb8e66dc 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -935,7 +935,7 @@
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <606250>;
-				regulator-max-microvolt = <1193750>;
+				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
 			};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 6b20376191a7..2f40c6cc407c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -29,6 +29,15 @@
 		rdma4 = &rdma4;
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -55,7 +64,8 @@
 			clock-frequency = <1701000000>;
 			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu1: cpu@100 {
@@ -66,7 +76,8 @@
 			clock-frequency = <1701000000>;
 			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu2: cpu@200 {
@@ -77,7 +88,8 @@
 			clock-frequency = <1701000000>;
 			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu3: cpu@300 {
@@ -88,7 +100,8 @@
 			clock-frequency = <1701000000>;
 			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
 		};
 
 		cpu4: cpu@400 {
@@ -99,6 +112,7 @@
 			clock-frequency = <2171000000>;
 			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -110,6 +124,7 @@
 			clock-frequency = <2171000000>;
 			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -121,6 +136,7 @@
 			clock-frequency = <2171000000>;
 			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -132,6 +148,7 @@
 			clock-frequency = <2171000000>;
 			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
 		};
 
@@ -149,19 +166,16 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
-
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -251,6 +265,12 @@
 		compatible = "simple-bus";
 		ranges;
 
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
@@ -531,8 +551,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		pwrap: pwrap@10026000 {
@@ -575,6 +594,8 @@
 			compatible = "mediatek,mt8192-scp_adsp";
 			reg = <0 0x10720000 0 0x1000>;
 			#clock-cells = <1>;
+			/* power domain dependency not upstreamed */
+			status = "fail";
 		};
 
 		uart0: serial@11002000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 4fbd99eb496a..dec85d254838 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -56,10 +56,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@54600000 {
 			no-map;
-			reg = <0 0x54600000 0x0 0x30000>;
+			reg = <0 0x54600000 0x0 0x200000>;
 		};
 
 		/* 12 MiB reserved for OP-TEE (BL32)
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 905d1a90b406..2c2b946b614b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -36,7 +36,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -49,7 +49,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -62,7 +62,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -75,7 +75,7 @@
 			enable-method = "psci";
 			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
+			capacity-dmips-mhz = <308>;
 			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
@@ -150,22 +150,20 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
 
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
 
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
 
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
 
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -244,6 +242,15 @@
 		status = "disabled";
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -683,8 +690,7 @@
 		};
 
 		watchdog: watchdog@10007000 {
-			compatible = "mediatek,mt8195-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt8195-wdt";
 			mediatek,disable-extrst;
 			reg = <0 0x10007000 0 0x100>;
 			#reset-cells = <1>;
@@ -701,7 +707,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&topckgen CLK_TOP_CLK26M_D2>;
+			clocks = <&clk13m>;
 		};
 
 		pwrap: pwrap@10024000 {
@@ -1410,6 +1416,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0 0x11e30000 0xe00>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
 			status = "disabled";
 
 			u2port1: usb-phy@0 {
@@ -1966,7 +1973,7 @@
 		};
 
 		vdosys0: syscon@1c01a000 {
-			compatible = "mediatek,mt8195-mmsys", "syscon";
+			compatible = "mediatek,mt8195-vdosys0", "mediatek,mt8195-mmsys", "syscon";
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
@@ -2101,7 +2108,7 @@
 		};
 
 		vdosys1: syscon@1c100000 {
-			compatible = "mediatek,mt8195-mmsys", "syscon";
+			compatible = "mediatek,mt8195-vdosys1", "syscon";
 			reg = <0 0x1c100000 0 0x1000>;
 			#clock-cells = <1>;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 8ee1529683a3..ec8dfb3d1c6d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@
 	};
 
 	firmware {
-		optee: optee@4fd00000 {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
@@ -209,7 +209,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0@0 {
+	i2c0_pins_a: i2c0 {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2@0 {
+	i2c2_pins_a: i2c2 {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 2dd5e38820b1..088d89801c27 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -61,7 +61,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	psci {
+	psci: psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 9d1a082de3e2..32bb76b3202a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -6,6 +6,18 @@
 /dts-v1/;
 #include "sparx5.dtsi"
 
+&psci {
+	status = "disabled";
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a44c56c1e56e..634373a423ef 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1666,7 +1666,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_cam_1v2: regulator-vdd-cam-1v8 {
+	vdd_cam_1v2: regulator-vdd-cam-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cam-1v2";
 		regulator-min-microvolt = <1200000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 7c569695b705..2b4dbfac84a7 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1312,6 +1312,7 @@
 
 	uartd: serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		status = "okay";
 
 		bluetooth {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 57ab75328814..f094011be9ed 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2004,6 +2004,7 @@
 
 		serial@3100000 {
 			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
 			status = "okay";
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 0170bfa8a467..dfe2cf2f4b21 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -1965,7 +1965,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+		ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */
 			 <0x02000000 0x0  0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2178,7 +2178,7 @@
 		bus-range = <0x0 0xff>;
 
 		ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
-			 <0x02000000 0x0  0x40000000 0x21 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+			 <0x02000000 0x0  0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
 		interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>,
@@ -2336,7 +2336,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */
 			 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
@@ -2442,7 +2442,7 @@
 
 		bus-range = <0x0 0xff>;
 
-		ranges = <0x43000000 0x2e 0x40000000 0x2e 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+		ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */
 			 <0x02000000 0x0  0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
 			 <0x01000000 0x0  0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index fc0e71ba8044..544b7e49ed65 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -289,9 +289,9 @@
 		clock-names = "xclk";
 		clock-frequency = <23880000>;
 
-		vdddo-supply = <&camera_vdddo_1v8>;
-		vdda-supply = <&camera_vdda_2v8>;
-		vddd-supply = <&camera_vddd_1v5>;
+		DOVDD-supply = <&camera_vdddo_1v8>;
+		AVDD-supply = <&camera_vdda_2v8>;
+		DVDD-supply = <&camera_vddd_1v5>;
 
 		/* No camera mezzanine by default */
 		status = "disabled";
@@ -448,21 +448,21 @@
 	vdd_l7-supply = <&pm8916_s4>;
 
 	s3 {
-		regulator-min-microvolt = <375000>;
-		regulator-max-microvolt = <1562000>;
+		regulator-min-microvolt = <1250000>;
+		regulator-max-microvolt = <1350000>;
 	};
 
 	s4 {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <2150000>;
 
 		regulator-always-on;
 		regulator-boot-on;
 	};
 
 	l1 {
-		regulator-min-microvolt = <375000>;
-		regulator-max-microvolt = <1525000>;
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
 	};
 
 	l2 {
@@ -471,13 +471,13 @@
 	};
 
 	l4 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
 	};
 
 	l5 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	l6 {
@@ -486,60 +486,68 @@
 	};
 
 	l7 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	l8 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
 	};
 
 	l9 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	l10 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
 	};
 
 	l11 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
 		regulator-allow-set-load;
 		regulator-system-load = <200000>;
 	};
 
 	l12 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
 	};
 
 	l13 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
 	};
 
 	l14 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
-	/**
-	 * 1.8v required on LS expansion
-	 * for mezzanine boards
+	/*
+	 * The 96Boards specification expects a 1.8V power rail on the low-speed
+	 * expansion connector that is able to provide at least 0.18W / 100 mA.
+	 * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
+	 * must be specified to ensure the regulators are not put in LPM where they
+	 * would only provide 5 mA.
 	 */
 	l15 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
 		regulator-always-on;
 	};
 
 	l16 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
 	};
 
 	l17 {
@@ -548,8 +556,8 @@
 	};
 
 	l18 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
 	};
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index ad222dfb3cca..5b52af3fd1f2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -742,8 +742,7 @@
 &pmi8994_spmi_regulators {
 	vdd_s2-supply = <&vph_pwr>;
 
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-name = "VDD_GFX";
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index 92f264891d84..9b20c1a47a18 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -26,7 +26,7 @@
 
 	v1p05: v1p05-regulator {
 		compatible = "regulator-fixed";
-		reglator-name = "v1p05";
+		regulator-name = "v1p05";
 		regulator-always-on;
 		regulator-boot-on;
 
@@ -38,7 +38,7 @@
 
 	v12_poe: v12-poe-regulator {
 		compatible = "regulator-fixed";
-		reglator-name = "v12_poe";
+		regulator-name = "v12_poe";
 		regulator-always-on;
 		regulator-boot-on;
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 1ba2eca33c7b..6a716c83e5f1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -37,6 +37,8 @@
 
 &blsp1_spi1 {
 	cs-select = <0>;
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	flash@0 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index a7c7ca980a71..c3492a383155 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -436,10 +436,8 @@
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0 0x20200000
-				  0 0x10000>, /* downstream I/O */
-				 <0x82000000 0 0x20220000 0 0x20220000
-				  0 0xfde0000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 7143c936de61..bb0a838891f6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -59,11 +59,11 @@
 	perst-gpios = <&tlmm 58 0x1>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index db4b87944cdf..a695686afadf 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -22,7 +22,7 @@
 };
 
 &blsp1_spi1 {
-	status = "ok";
+	status = "okay";
 
 	flash@0 {
 		#address-cells = <1>;
@@ -34,33 +34,33 @@
 };
 
 &blsp1_uart5 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 	perst-gpios = <&tlmm 58 0x1>;
 };
 
 &pcie1 {
-	status = "ok";
+	status = "okay";
 	perst-gpios = <&tlmm 61 0x1>;
 };
 
-&pcie_phy0 {
-	status = "ok";
+&pcie_qmp0 {
+	status = "okay";
 };
 
-&pcie_phy1 {
-	status = "ok";
+&pcie_qmp1 {
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a721cdd80489..3f7cf3fdd319 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -137,7 +137,7 @@
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB1_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb1_pipe_clk_src";
+				clock-output-names = "usb3phy_1_cc_pipe_clk";
 			};
 		};
 
@@ -180,7 +180,7 @@
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
+				clock-output-names = "usb3phy_0_cc_pipe_clk";
 			};
 		};
 
@@ -197,9 +197,9 @@
 			status = "disabled";
 		};
 
-		pcie_qmp0: phy@86000 {
-			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x00086000 0x1c4>;
+		pcie_qmp0: phy@84000 {
+			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+			reg = <0x00084000 0x1bc>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -213,15 +213,16 @@
 				      "common";
 			status = "disabled";
 
-			pcie_phy0: phy@86200 {
-				reg = <0x86200 0x16c>,
-				      <0x86400 0x200>,
-				      <0x86800 0x4f4>;
+			pcie_phy0: phy@84200 {
+				reg = <0x84200 0x16c>,
+				      <0x84400 0x200>,
+				      <0x84800 0x1f0>,
+				      <0x84c00 0xf4>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "pcie_0_pipe_clk";
+				clock-output-names = "pcie20_phy0_pipe_clk";
 			};
 		};
 
@@ -242,14 +243,14 @@
 			status = "disabled";
 
 			pcie_phy1: phy@8e200 {
-				reg = <0x8e200 0x16c>,
+				reg = <0x8e200 0x130>,
 				      <0x8e400 0x200>,
-				      <0x8e800 0x4f4>;
+				      <0x8e800 0x1f8>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "pcie_1_pipe_clk";
+				clock-output-names = "pcie20_phy1_pipe_clk";
 			};
 		};
 
@@ -749,10 +750,8 @@
 			phys = <&pcie_phy1>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x10200000 0x10200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x10300000 0x10300000
-				  0 0xd00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
 
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -795,26 +794,26 @@
 		};
 
 		pcie0: pci@20000000 {
-			compatible = "qcom,pcie-ipq8074";
+			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
-			      <0x00080000 0x2000>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x4000>,
 			      <0x20100000 0x1000>;
-			reg-names = "dbi", "elbi", "parf", "config";
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
+			max-link-speed = <3>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0x20200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x20300000 0x20300000
-				  0 0xd00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -832,28 +831,30 @@
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
-				 <&gcc GCC_PCIE0_AHB_CLK>,
-				 <&gcc GCC_PCIE0_AUX_CLK>;
-
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>;
 			clock-names = "iface",
 				      "axi_m",
 				      "axi_s",
-				      "ahb",
-				      "aux";
+				      "axi_bridge",
+				      "rchng";
+
 			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
 				 <&gcc GCC_PCIE0_SLEEP_ARES>,
 				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
 				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
 				 <&gcc GCC_PCIE0_AHB_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
 			reset-names = "pipe",
 				      "sleep",
 				      "sticky",
 				      "axi_m",
 				      "axi_s",
 				      "ahb",
-				      "axi_m_sticky";
+				      "axi_m_sticky",
+				      "axi_s_sticky";
 			status = "disabled";
 		};
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 6a34412d6042..2317f69e1f96 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -163,7 +163,7 @@
 		pinctrl-0 = <&light_int_default>;
 
 		vdd-supply = <&pm8916_l17>;
-		vio-supply = <&pm8916_l6>;
+		vddio-supply = <&pm8916_l6>;
 	};
 
 	gyroscope@68 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index a831064700ee..f84b3c1a03c5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1088,7 +1088,7 @@
 			};
 		};
 
-		camss: camss@1b00000 {
+		camss: camss@1b0ac00 {
 			compatible = "qcom,msm8916-camss";
 			reg = <0x01b0ac00 0x200>,
 				<0x01b00030 0x4>,
@@ -1345,7 +1345,7 @@
 		};
 
 		mpss: remoteproc@4080000 {
-			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>,
 			      <0x04020000 0x040>;
 
@@ -1480,7 +1480,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		sdhc_1: mmc@7824000 {
+		sdhc_1: mmc@7824900 {
 			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
 			reg-names = "hc", "core";
@@ -1498,7 +1498,7 @@
 			status = "disabled";
 		};
 
-		sdhc_2: mmc@7864000 {
+		sdhc_2: mmc@7864900 {
 			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
 			reg-names = "hc", "core";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c1..85a87d058f8a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -455,7 +455,7 @@
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 155>;
+			gpio-ranges = <&tlmm 0 0 142>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
index 7e6bce4af441..4159fc35571a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
index e6a5ebd30e2f..ad9702dd171b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
  */
 
 /dts-v1/;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 71e373b11de9..13b8823ae063 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -1,7 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
  */
 
 /dts-v1/;
@@ -13,6 +15,9 @@
 /* cont_splash_mem has different memory mapping */
 /delete-node/ &cont_splash_mem;
 
+/* disabled on downstream, conflicts with cont_splash_mem */
+/delete-node/ &dfps_data_mem;
+
 / {
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
@@ -47,7 +52,12 @@
 		};
 
 		cont_splash_mem: memory@3400000 {
-			reg = <0 0x03400000 0 0x1200000>;
+			reg = <0 0x03400000 0 0xc00000>;
+			no-map;
+		};
+
+		reserved@5000000 {
+			reg = <0x0 0x05000000 0x0 0x1a00000>;
 			no-map;
 		};
 	};
@@ -79,8 +89,8 @@
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 
 		pm8994_s1: s1 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
 		};
 
 		pm8994_s2: s2 {
@@ -236,9 +246,8 @@
 		};
 
 		pm8994_l26: l26 {
-			/* TODO: value from downstream
 			regulator-min-microvolt = <987500>;
-			fails to apply */
+			regulator-max-microvolt = <987500>;
 		};
 
 		pm8994_l27: l27 {
@@ -252,19 +261,13 @@
 		};
 
 		pm8994_l29: l29 {
-			/* TODO: Unsupported voltage range.
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			qcom,init-voltage = <2800000>;
-			*/
 		};
 
 		pm8994_l30: l30 {
-			/* TODO: get this verified
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
 		};
 
 		pm8994_l31: l31 {
@@ -273,11 +276,8 @@
 		};
 
 		pm8994_l32: l32 {
-			/* TODO: get this verified
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
-			qcom,init-voltage = <1800000>;
-			*/
 		};
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index c4e87d0aec42..3ab0ad14e870 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -11,6 +11,12 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+
 / {
 	model = "Xiaomi Mi 4C";
 	compatible = "xiaomi,libra", "qcom,msm8992";
@@ -70,25 +76,67 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* This is for getting crash logs using Android downstream kernels */
-		ramoops@dfc00000 {
-			compatible = "ramoops";
-			reg = <0x0 0xdfc00000 0x0 0x40000>;
-			console-size = <0x10000>;
-			record-size = <0x10000>;
-			ftrace-size = <0x10000>;
-			pmsg-size = <0x20000>;
+		memory_hole: hole@6400000 {
+			reg = <0 0x06400000 0 0x600000>;
+			no-map;
+		};
+
+		memory_hole2: hole2@6c00000 {
+			reg = <0 0x06c00000 0 0x2400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@9000000 {
+			reg = <0 0x09000000 0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: tzapp@ea00000 {
+			reg = <0 0x0ea00000 0 0x1900000>;
+			no-map;
+		};
+
+		mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+			reg = <0 0xca0b0000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@ca100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xca100000 0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
 		};
 
-		modem_region: modem_region@9000000 {
-			reg = <0x0 0x9000000 0x0 0x5a00000>;
+		audio_mem: audio@cb400000 {
+			reg = <0 0xcb000000 0 0x400000>;
+			no-mem;
+		};
+
+		qseecom_mem: qseecom@cb400000 {
+			reg = <0 0xcb400000 0 0x1c00000>;
+			no-mem;
+		};
+
+		adsp_rfsa_mem: adsp-rfsa@cd000000 {
+			reg = <0 0xcd000000 0 0x10000>;
 			no-map;
 		};
 
-		tzapp: modem_region@ea00000 {
-			reg = <0x0 0xea00000 0x0 0x1900000>;
+		sensor_rfsa_mem: sensor-rfsa@cd010000 {
+			reg = <0 0xcd010000 0 0x10000>;
 			no-map;
 		};
+
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0 0xdfc00000 0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
 	};
 };
 
@@ -130,11 +178,6 @@
 	status = "okay";
 };
 
-&peripheral_region {
-	reg = <0x0 0x7400000 0x0 0x1c00000>;
-	no-map;
-};
-
 &pm8994_spmi_regulators {
 	VDD_APC0: s8 {
 		regulator-min-microvolt = <680000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 750643763a76..02fc3795dbfd 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
  */
 
 #include "msm8994.dtsi"
@@ -36,10 +37,6 @@
 	compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
 };
 
-&tcsr_mutex {
-	compatible = "qcom,sfpb-mutex";
-};
-
 &timer {
 	interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index dbfbb77e9ff5..4801d973f9d7 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -1,16 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
 
 #include "msm8994.dtsi"
 
-/* Angler's firmware does not report where the memory is allocated */
-/delete-node/ &cont_splash_mem;
-
 / {
 	model = "Huawei Nexus 6P";
 	compatible = "huawei,angler", "qcom,msm8994";
@@ -27,6 +24,27 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x1000000>;
+			no-map;
+		};
+
+		tzapp_mem: tzapp@4800000 {
+			reg = <0 0x04800000 0 0x1900000>;
+			no-map;
+		};
+
+		reserved@6300000 {
+			reg = <0 0x06300000 0 0x700000>;
+			no-map;
+		};
+	};
 };
 
 &blsp1_uart2 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index f9d8bd09e074..c6145ee8b278 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -542,8 +542,7 @@
 };
 
 &pmi8994_spmi_regulators {
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index ff60b7004d26..2ecf455db830 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -173,8 +173,7 @@
 	 * power domain.. which still isn't enough and forces us to bind
 	 * OXILI_CX and OXILI_GX together!
 	 */
-	vdd_gfx: s2@1700 {
-		reg = <0x1700 0x100>;
+	vdd_gfx: s2 {
 		regulator-name = "VDD_GFX";
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
index ded5b7ceeaf9..3c6c2cf99fb9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -227,6 +227,11 @@
 			reg = <0 0xc9400000 0 0x3f00000>;
 			no-map;
 		};
+
+		reserved@6c00000 {
+			reg = <0 0x06c00000 0 0x400000>;
+			no-map;
+		};
 	};
 
 	smd {
@@ -741,7 +746,7 @@
 			reg = <0xfc4ab000 0x4>;
 		};
 
-		spmi_bus: spmi@fc4c0000 {
+		spmi_bus: spmi@fc4cf000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xfc4cf000 0x1000>,
 			      <0xfc4cb000 0x1000>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index ca7c8d2e1d3d..a60decd89429 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -944,10 +944,6 @@
 	};
 };
 
-/*
- * For reasons that are currently unknown (but probably related to fusb301), USB takes about
- * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
- */
 &usb3 {
 	status = "okay";
 	qcom,select-utmi-as-pipe-clk;
@@ -956,6 +952,7 @@
 &usb3_dwc3 {
 	extcon = <&usb3_id>;
 	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
 	phys = <&hsusb_phy1>;
 	phy-names = "usb2-phy";
 	snps,hird-threshold = /bits/ 8 <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 6e6b60e78f22..9f4f8147f336 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -81,7 +81,7 @@
 		#size-cells = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
-		vdda-supply = <&vreg_l6a_1p8>;
+		vio-supply = <&vreg_l6a_1p8>;
 		vdd-supply = <&vdd_3v2_tp>;
 		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index aba717644391..9de2248a385a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -144,82 +144,92 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -232,127 +242,137 @@
 		/* Nominal fmax for now */
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0x6>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
-			opp-supported-hw = <0x77>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -692,7 +712,7 @@
 			#power-domain-cells = <1>;
 			reg = <0x00300000 0x90000>;
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_LN_BB_CLK>,
 				 <&sleep_clk>,
 				 <&pciephy_0>,
@@ -809,9 +829,11 @@
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
+			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
 			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
 		mnoc: interconnect@5a4000 {
@@ -1030,7 +1052,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1041,7 +1063,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4>;
+				interrupts = <5>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_BYTE1_CLK>,
@@ -1098,7 +1120,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1213,17 +1235,17 @@
 				compatible = "operating-points-v2";
 
 				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
 				 */
 				opp-624000000 {
 					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x09>;
 				};
 				opp-560000000 {
 					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
+					opp-supported-hw = <0x0d>;
 				};
 				opp-510000000 {
 					opp-hz = /bits/ 64 <510000000>;
@@ -1806,8 +1828,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
 
 				device_type = "pci";
 
@@ -1860,8 +1882,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
 
 				device_type = "pci";
 
@@ -1911,8 +1933,8 @@
 
 				#address-cells = <3>;
 				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+				ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
 
 				device_type = "pci";
 
@@ -2023,7 +2045,7 @@
 			};
 		};
 
-		camss: camss@a00000 {
+		camss: camss@a34000 {
 			compatible = "qcom,msm8996-camss";
 			reg = <0x00a34000 0x1000>,
 			      <0x00a00030 0x4>,
@@ -2912,8 +2934,8 @@
 			compatible = "qcom,msm8996-apcc";
 			reg = <0x06400000 0x90000>;
 
-			clock-names = "xo";
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+			clock-names = "xo", "sys_apcs_aux";
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
 
 			#clock-cells = <1>;
 		};
@@ -2957,8 +2979,11 @@
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,is-utmi-l1-suspend;
+				tx-fifo-resize;
 			};
 		};
 
@@ -3032,7 +3057,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3056,7 +3081,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC2_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3267,6 +3292,9 @@
 			#size-cells = <1>;
 			ranges;
 
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
 			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
 				<&gcc GCC_USB20_MASTER_CLK>,
 				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
@@ -3342,7 +3370,7 @@
 					interrupt-names = "intr1", "intr2";
 					interrupt-controller;
 					#interrupt-cells = <1>;
-					reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
 
 					slim-ifc-dev = <&tasha_ifd>;
 
@@ -3363,7 +3391,7 @@
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_mem>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 000000000000..63e1b4ec7a36
--- /dev/null
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f05f16ac5cc1..b00b8164c4aa 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -916,7 +916,7 @@
 			phy-names = "pciephy";
 			status = "disabled";
 
-			ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
 
 			#interrupt-cells = <1>;
@@ -1513,7 +1513,7 @@
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
 			      <0x16280000 0x180000>;
-			reg-names = "stm-base", "stm-data-base";
+			reg-names = "stm-base", "stm-stimulus-base";
 			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
@@ -2418,10 +2418,10 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
-			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+			clock-names = "iface-mm",
+				      "iface-smmu",
+				      "bus-smmu";
 
 			#global-interrupts = <0>;
 			interrupts =
@@ -2445,6 +2445,8 @@
 				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&mmcc BIMC_SMMU_GDSC>;
 		};
 
 		remoteproc_adsp: remoteproc@17300000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm6150l.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index f02c223ef448..06d729ff65a9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -75,8 +75,9 @@
 		pm6150l_wled: leds@d800 {
 			compatible = "qcom,pm6150l-wled";
 			reg = <0xd800>, <0xd900>;
-			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ovp";
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
 			label = "backlight";
 
 			status = "disabled";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi
index ecf9b9919182..68245d78d2b9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
index e1622b16c08b..02a69ac0149b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -163,7 +163,7 @@
 				qcom,pre-scaling = <1 3>;
 			};
 
-			vcoin: vcoin@83 {
+			vcoin: vcoin@85 {
 				reg = <ADC5_VCOIN>;
 				qcom,decimation = <1024>;
 				qcom,pre-scaling = <1 3>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm660l.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm660l.dtsi
index 8aa0a5078772..88606b996d69 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -74,8 +74,9 @@
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800>, <0xd900>;
-			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ovp";
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
 			label = "backlight";
 
 			status = "disabled";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index 61f7a6345150..694fe912536e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com>
  */
 
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm8350.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm8350.dtsi
index 2dfeb99300d7..9ed9ba23e81e 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm8350.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -8,7 +8,7 @@
 
 / {
 	thermal-zones {
-		pm8350_thermal: pm8350c-thermal {
+		pm8350_thermal: pm8350-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8350_temp_alarm>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm8350b.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm8350b.dtsi
index f1c7bd9d079c..05c105898892 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pm8350b.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -8,7 +8,7 @@
 
 / {
 	thermal-zones {
-		pm8350b_thermal: pm8350c-thermal {
+		pm8350b_thermal: pm8350b-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8350b_temp_alarm>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 542c215dde10..49902a3e161d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -49,15 +49,14 @@
 
 		pmi8994_spmi_regulators: regulators {
 			compatible = "qcom,pmi8994-regulators";
-			#address-cells = <1>;
-			#size-cells = <1>;
 		};
 
 		pmi8994_wled: wled@d800 {
 			compatible = "qcom,pmi8994-wled";
 			reg = <0xd800>, <0xd900>;
-			interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "short";
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
 			qcom,cabc;
 			qcom,external-pfet;
 			status = "disabled";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index a7ec9d11946d..29cfb6fca9bf 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -16,8 +16,9 @@
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
@@ -43,7 +44,7 @@
 		};
 
 		pmk8350_adc_tm: adc-tm@3400 {
-			compatible = "qcom,adc-tm7";
+			compatible = "qcom,spmi-adc-tm5-gen2";
 			reg = <0x3400>;
 			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmr735b.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pmr735b.dtsi
index ec24c4478005..f7473e247322 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/pmr735b.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -8,7 +8,7 @@
 
 / {
 	thermal-zones {
-		pmr735a_thermal: pmr735a-thermal {
+		pmr735b_thermal: pmr735b-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pmr735b_temp_alarm>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 80f2d05595fa..bec1b6e5a67a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -792,7 +792,7 @@
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
-				 <&gcc 21>;
+				 <&gcc GCC_PCIE_0_PIPE_ARES>;
 			reset-names = "phy", "pipe";
 
 			clock-output-names = "pcie_0_pipe_clk";
@@ -1322,12 +1322,12 @@
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
 			clock-names = "iface", "aux", "master_bus", "slave_bus";
 
-			resets = <&gcc 18>,
-				 <&gcc 17>,
-				 <&gcc 15>,
-				 <&gcc 19>,
+			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE_0_BCR>,
-				 <&gcc 16>;
+				 <&gcc GCC_PCIE_0_AHB_ARES>;
 			reset-names = "axi_m",
 				      "axi_s",
 				      "axi_m_sticky",
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index bc6d70d11da9..b33e6cc4b67a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -121,7 +121,7 @@
 			};
 		};
 
-		pm8150l-thermal {
+		pm8150l-pcb-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
index d8ed1d7b4ec7..4b306a59d9be 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
@@ -16,3 +16,11 @@
 &cpu6_opp12 {
 	opp-peak-kBps = <8532000 23347200>;
 };
+
+&cpu6_opp13 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp14 {
+	opp-peak-kBps = <8532000 23347200>;
+};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 1bd6c7dcd9e9..bfab67f4a7c9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -194,6 +194,12 @@ ap_ts_pen_1v8: &i2c4 {
 		pins = "gpio49", "gpio50", "gpio51", "gpio52";
 		function = "mi2s_1";
 	};
+
+	pinconf {
+		pins = "gpio49", "gpio50", "gpio51", "gpio52";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
 };
 
 &ts_reset_l {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
index 850776c5323d..70d5a7aa8873 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -26,7 +26,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
 
-		vcc-supply = <&pp3300_fp_tp>;
+		vdd-supply = <&pp3300_fp_tp>;
 		hid-descr-addr = <0x20>;
 
 		wakeup-source;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
index 56d787785fd5..2e35c69a978f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -39,7 +39,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-		vcc-supply = <&pp3300_fp_tp>;
+		vdd-supply = <&pp3300_fp_tp>;
 		post-power-on-delay-ms = <100>;
 		hid-descr-addr = <0x0001>;
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 58976a1ba06b..6f0ee4e13ef1 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1521,7 +1521,7 @@
 				};
 			};
 
-			qspi_data12: qspi-data12 {
+			qspi_data23: qspi-data23 {
 				pinmux-data {
 					pins = "gpio66", "gpio67";
 					function = "qspi_data";
@@ -3238,8 +3238,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 			cell-index = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
index 4566722bf4dd..8f5d82885e44 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
@@ -33,7 +33,7 @@ ap_tp_i2c: &i2c0 {
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 
 		hid-descr-addr = <0x20>;
-		vcc-supply = <&pp3300_z1>;
+		vdd-supply = <&pp3300_z1>;
 
 		wakeup-source;
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 7559164cdda0..e2e37a0292ad 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -10,7 +10,6 @@
 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include "sc7280-idp.dtsi"
 #include "pmr735a.dtsi"
-#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index cd432a2856a7..1c370dcfe60b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -13,6 +13,7 @@
 #include "pmk8350.dtsi"
 
 #include "sc7280-chrome-common.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	aliases {
@@ -34,7 +35,7 @@
 		pinctrl-0 = <&wcd_reset_n>;
 		pinctrl-1 = <&wcd_reset_n_sleep>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 
 		qcom,rx-device = <&wcd_rx>;
 		qcom,tx-device = <&wcd_tx>;
@@ -487,7 +488,6 @@
 	wcd_rx: codec@0,4 {
 		compatible = "sdw20217010d00";
 		reg = <0 4>;
-		#sound-dai-cells = <1>;
 		qcom,rx-port-mapping = <1 2 3 4 5>;
 	};
 };
@@ -498,7 +498,6 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		#sound-dai-cells = <1>;
 		qcom,tx-port-mapping = <1 2 3 4>;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4b8c676b0bb1..c358abc052eb 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -37,7 +37,7 @@
 		pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
 		pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
 
-		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
 		us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		qcom,rx-device = <&wcd_rx>;
@@ -418,7 +418,6 @@
 	wcd_rx: codec@0,4 {
 		compatible = "sdw20217010d00";
 		reg = <0 4>;
-		#sound-dai-cells = <1>;
 		qcom,rx-port-mapping = <1 2 3 4 5>;
 	};
 };
@@ -427,7 +426,6 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		#sound-dai-cells = <1>;
 		qcom,tx-port-mapping = <1 2 3 4>;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 4cdc88d33944..0cdc579f26de 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2023,7 +2023,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
@@ -2077,6 +2077,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
+			dma-coherent;
+
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
@@ -3588,12 +3590,17 @@
 			      <0 0x88e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					eud_ep: endpoint {
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
 				port@1 {
+					reg = <1>;
 					eud_con: endpoint {
 						remote-endpoint = <&con_eud>;
 					};
@@ -3604,7 +3611,11 @@
 		eud_typec: connector {
 			compatible = "usb-c-connector";
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					con_eud: endpoint {
 						remote-endpoint = <&eud_con>;
 					};
@@ -4242,8 +4253,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
@@ -4334,7 +4345,7 @@
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12-pins {
+			qspi_data23: qspi-data23-pins {
 				pins = "gpio16", "gpio17";
 				function = "qspi_data";
 			};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 965915791b24..ce4b8217eb04 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -57,7 +57,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
@@ -364,7 +364,7 @@
 	};
 
 	misc_3p3_reg_en: misc-3p3-reg-en-state {
-		pins = "gpio1";
+		pins = "gpio2";
 		function = "normal";
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 19cf637704ed..4d693c0232a3 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -347,7 +347,7 @@
 };
 
 &tlmm {
-	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+	gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
 
 	kybd_default: kybd-default-state {
 		disable {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 24836b6b9bbc..be0df0856df9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -15,8 +15,9 @@
 		#size-cells = <0>;
 
 		pmk8280_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
-			reg = <0x1300>;
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
 
 			pmk8280_pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 212d63d5cbf2..405835ad28bc 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -396,6 +396,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sc8280xp", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
 
@@ -855,12 +856,13 @@
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_UFS_PHY_AHB_CLK>,
 				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
@@ -891,7 +893,7 @@
 			ranges;
 			clock-names = "ref",
 				      "ref_aux";
-			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
+			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
 			resets = <&ufs_mem_hc 0>;
@@ -923,12 +925,13 @@
 			power-domains = <&gcc UFS_CARD_GDSC>;
 
 			iommus = <&apps_smmu 0x4a0 0x0>;
+			dma-coherent;
 
 			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
 				 <&gcc GCC_UFS_CARD_AHB_CLK>,
 				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
@@ -959,7 +962,7 @@
 			ranges;
 			clock-names = "ref",
 				      "ref_aux";
-			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
+			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
 
 			resets = <&ufs_card_hc 0>;
@@ -1171,7 +1174,7 @@
 			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+				 <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -1285,6 +1288,7 @@
 					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -1339,6 +1343,7 @@
 					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -1468,8 +1473,8 @@
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
@@ -1723,6 +1728,7 @@
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
 			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index b51b85f583e5..2430549265d3 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -779,7 +779,7 @@
 					pins = "gpio17", "gpio18", "gpio19";
 					function = "gpio";
 					drive-strength = <2>;
-					bias-no-pull;
+					bias-disable;
 				};
 			};
 
@@ -1902,7 +1902,7 @@
 			};
 		};
 
-		camss: camss@ca00000 {
+		camss: camss@ca00020 {
 			compatible = "qcom,sdm660-camss";
 			reg = <0x0ca00020 0x10>,
 			      <0x0ca30000 0x100>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index b5eb8f7eca1d..b5f11fbcc300 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1436,7 +1436,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-low;
 		};
@@ -1446,7 +1446,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-high;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 359e2b21346c..c59c61aa1b09 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -100,6 +100,14 @@
 		};
 	};
 
+	reserved-memory {
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+
 	lt9611_1v8: lt9611-vdd18-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "LT9611_1V8";
@@ -512,6 +520,7 @@
 };
 
 &mdss {
+	memory-region = <&cont_splash_mem>;
 	status = "okay";
 };
 
@@ -969,7 +978,7 @@
 	};
 
 	wcd_intr_default: wcd_intr_default {
-		pins = <54>;
+		pins = "gpio54";
 		function = "gpio";
 
 		input-enable;
@@ -1123,7 +1132,10 @@
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi2_default {
-	drive-strength = <16>;
+	pinconf {
+		pins = "gpio27", "gpio28", "gpio29", "gpio30";
+		drive-strength = <16>;
+	};
 };
 
 &qup_uart3_default{
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 51ee42e3c995..d6918e6d1979 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -14,6 +14,15 @@
 	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
 	qcom,board-id = <8 0>;
 
+	aliases {
+		serial0 = &uart6;
+		serial1 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index edbae6d0eedb..eb0a8a6d81ae 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -484,6 +484,7 @@
 		};
 
 		rmi4-f12@12 {
+			reg = <0x12>;
 			syna,rezero-wait-ms = <0xc8>;
 			syna,clip-x-high = <0x438>;
 			syna,clip-y-high = <0x870>;
@@ -628,7 +629,7 @@
 	};
 
 	wcd_intr_default: wcd-intr-default {
-		pins = "goui54";
+		pins = "gpio54";
 		function = "gpio";
 		input-enable;
 		bias-pull-down;
@@ -731,8 +732,6 @@
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
-
-	qcom,snoc-host-cap-skip-quirk;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d761da47220d..52c9f5639f8a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -198,7 +198,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -222,7 +222,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -243,7 +243,7 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -264,7 +264,7 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <290>;
+			dynamic-power-coefficient = <154>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -1099,6 +1099,7 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SDM845_CX>;
 		};
 
 		qfprom@784000 {
@@ -2226,8 +2227,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -2331,7 +2332,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
@@ -2520,7 +2521,7 @@
 				<0 0>,
 				<0 0>,
 				<0 0>,
-				<0 300000000>;
+				<75000000 300000000>;
 
 			status = "disabled";
 		};
@@ -4207,7 +4208,7 @@
 			#reset-cells = <1>;
 		};
 
-		camss: camss@a00000 {
+		camss: camss@acb3000 {
 			compatible = "qcom,sdm845-camss";
 
 			reg = <0 0xacb3000 0 0x1000>,
@@ -5043,6 +5044,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 71fbf33fc815..37ede5b9202b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -487,8 +487,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 118196216564..feeeeb5862aa 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -415,8 +415,10 @@
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 6a8b88cc4385..4a77b650c0d8 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -40,17 +40,18 @@
 	};
 
 	gpio-keys {
-		status = "okay";
 		compatible = "gpio-keys";
-		autorepeat;
 
-		key-vol-dn {
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
-			gpio-key,wakeup;
 			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
 		};
 	};
 
@@ -72,7 +73,7 @@
 			reg = <0x0 0xffc40000 0x0 0xc0000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
-			msg-size = <0x20000 0x20000>;
+			pmsg-size = <0x20000>;
 		};
 
 		cmdline_mem: memory@ffd00000 {
@@ -108,6 +109,14 @@
 
 &tlmm {
 	gpio-reserved-ranges = <22 2>, <28 6>;
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
 };
 
 &usb3 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 1fe3fa3ad877..271247b37175 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -442,9 +442,9 @@
 			reg = <0x01613000 0x180>;
 			#phy-cells = <0>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&gcc GCC_AHB2PHY_USB_CLK>;
-			clock-names = "ref", "cfg_ahb";
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
 
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 			status = "disabled";
@@ -458,7 +458,7 @@
 		sdhc_1: mmc@4744000 {
 			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
-			reg-names = "hc", "core";
+			reg-names = "hc", "cqhci";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index c39de7d3ace0..cea7ca3f326f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -306,11 +306,6 @@
 			no-map;
 		};
 
-		pil_gpu_mem: memory@8b715400 {
-			reg = <0 0x8b715400 0 0x2000>;
-			no-map;
-		};
-
 		pil_modem_mem: memory@8b800000 {
 			reg = <0 0x8b800000 0 0xf800000>;
 			no-map;
@@ -331,6 +326,11 @@
 			no-map;
 		};
 
+		pil_gpu_mem: memory@f0d00000 {
+			reg = <0 0xf0d00000 0 0x1000>;
+			no-map;
+		};
+
 		debug_region: memory@ffb00000 {
 			reg = <0 0xffb00000 0 0xc0000>;
 			no-map;
@@ -342,13 +342,12 @@
 		};
 
 		ramoops: ramoops@ffc00000 {
-			compatible = "removed-dma-pool", "ramoops";
-			reg = <0 0xffc00000 0 0x00100000>;
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
-			ftrace-size = <0x0>;
-			msg-size = <0x20000 0x20000>;
-			cc-size = <0x0>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
 			no-map;
 		};
 
@@ -485,6 +484,7 @@
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x60 0x0>;
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
@@ -1063,6 +1063,7 @@
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x560 0x0>;
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
@@ -1148,15 +1149,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a140c9f..c9aa7764fc59 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -33,9 +33,10 @@
 		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x9c000000 0 0x2300000>;
-			width = <1644>;
-			height = <3840>;
-			stride = <(1644 * 4)>;
+			/* Griffin BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
 			format = "a8r8g8b8";
 			/*
 			 * That's (going to be) a lot of clocks, but it's necessary due
@@ -126,7 +127,7 @@
 			reg = <0x0 0xffc00000 0x0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
-			msg-size = <0x20000 0x20000>;
+			pmsg-size = <0x20000>;
 			ecc-size = <16>;
 			no-map;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index cef8c4f4f0ff..f049fb42e3ca 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1196,7 +1196,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c7_default>;
-				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1783,8 +1783,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1810,7 +1810,7 @@
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommus = <&apps_smmu 0x1d80 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1879,7 +1879,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
@@ -1909,7 +1909,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommus = <&apps_smmu 0x1e00 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -2032,11 +2032,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 9865cd0fb7d7..a51d8f7d1487 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -635,7 +635,7 @@
 	wcd938x: codec {
 		compatible = "qcom,wcd9380-codec";
 		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 		vdd-buck-supply = <&vreg_s4a_1p8>;
 		vdd-rxtx-supply = <&vreg_s4a_1p8>;
 		vdd-io-supply = <&vreg_s4a_1p8>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 356a81698731..62590c6bd306 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -14,3 +14,236 @@
 };
 
 /delete-node/ &vreg_l7f_1p8;
+
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "CAM_PWR_LD_EN",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "NC",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "WLC_EN_N", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "AUX3_THERM", /* GPIO_10 */
+			  "DTV_PWR_EN",
+			  "PM3003A_MODE";
+};
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "CAM_PWR_A_CS",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "CAM4_MCLK",
+			  "TOF_RST_N",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 5ecf7dafb2ec..0e50661c1b4c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -20,6 +20,8 @@
 };
 
 &gpio_keys {
+	pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
 	g-assist-key {
 		label = "Google Assistant Key";
 		linux,code = <KEY_LEFTMETA>;
@@ -30,6 +32,247 @@
 	};
 };
 
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "G_ASSIST_N",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "PM3003A_MODE";
+};
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "FRONTC_PWR_EN",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
+
 &vreg_l2f_1p3 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 5428aab3058d..3b306dfb91e0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -26,9 +26,10 @@
 		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x9c000000 0 0x2300000>;
-			width = <1644>;
-			height = <3840>;
-			stride = <(1644 * 4)>;
+			/* pdx203 BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
 			format = "a8r8g8b8";
 			/*
 			 * That's a lot of clocks, but it's necessary due
@@ -50,12 +51,26 @@
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		/*
-		 * Camera focus (light press) and camera snapshot (full press)
-		 * seem not to work properly.. Adding the former one stalls the CPU
-		 * and the latter kills the volume down key for whatever reason. In any
-		 * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
-		 */
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
 
 		key-vol-down {
 			label = "Volume Down";
@@ -111,7 +126,7 @@
 			reg = <0x0 0xffc00000 0x0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
-			msg-size = <0x20000 0x20000>;
+			pmsg-size = <0x20000>;
 			ecc-size = <16>;
 			no-map;
 		};
@@ -545,6 +560,34 @@
 	vdda-pll-supply = <&vreg_l9a_1p2>;
 };
 
+&pm8150_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -619,7 +662,7 @@
 		pins = "gpio39";
 		function = "gpio";
 		drive-strength = <2>;
-		bias-disabled;
+		bias-disable;
 		input-enable;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e276eed1f8e2..4d9b30f0b284 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -99,7 +99,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_0>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
@@ -123,7 +123,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_100>;
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
@@ -144,7 +144,7 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_200>;
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
@@ -165,7 +165,7 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_300>;
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
@@ -1808,8 +1808,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -1862,6 +1862,7 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1917,7 +1918,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
@@ -1968,6 +1969,7 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2025,7 +2027,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2076,6 +2078,7 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie2_default_state>;
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2180,11 +2183,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -2455,7 +2458,7 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <2>;
-					pull-down;
+					bias-pull-down;
 					input-enable;
 				};
 			};
@@ -2892,15 +2895,11 @@
 			dp_phy: dp-phy@88ea200 {
 				reg = <0 0x088ea200 0 0x200>,
 				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eac00 0 0x400>,
+				      <0 0x088eaa00 0 0x200>,
 				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>,
-				      <0 0x088eaa00 0 0x100>;
+				      <0 0x088ea800 0 0x200>;
 				#phy-cells = <0>;
 				#clock-cells = <1>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
 		};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
index aa1fe3cd92e5..e791bbd094e3 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
@@ -341,6 +341,9 @@
 
 &usb_1 {
 	status = "okay";
+};
+
+&usb_1_dwc3 {
 	dr_mode = "peripheral";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a86d9ea93b9d..b3245b13b261 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -63,7 +63,7 @@
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
@@ -82,7 +82,7 @@
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
@@ -98,7 +98,7 @@
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
@@ -114,7 +114,7 @@
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
@@ -130,7 +130,7 @@
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a78";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
@@ -146,7 +146,7 @@
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a78";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
@@ -163,7 +163,7 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a78";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
@@ -179,7 +179,7 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-x1";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
@@ -236,8 +236,8 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <355>;
-				exit-latency-us = <909>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
 				min-residency-us = <3934>;
 				local-timer-stop;
 			};
@@ -246,8 +246,8 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
-				exit-latency-us = <1461>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
 				min-residency-us = <4488>;
 				local-timer-stop;
 			};
@@ -678,7 +678,7 @@
 		};
 
 		gpi_dma2: dma-controller@800000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
@@ -903,8 +903,8 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@900000 {
-			compatible = "qcom,sm8350-gpi-dma";
+		gpi_dma0: dma-controller@9800000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x09800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1043,8 +1043,6 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8350_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -1209,7 +1207,7 @@
 		};
 
 		gpi_dma1: dma-controller@a00000 {
-			compatible = "qcom,sm8350-gpi-dma";
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
@@ -2074,6 +2072,13 @@
 			      <0 0x18593000 0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
 
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 
@@ -2142,11 +2147,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index c1542e5cd06e..dd9a75e4fc11 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -556,8 +556,6 @@
 	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
 	vmmc-supply = <&pm8350c_l9>;
 	vqmmc-supply = <&pm8350c_l6>;
-	/* Forbid SDR104/SDR50 - broken hw! */
-	sdhci-caps-mask = <0x3 0x0>;
 	no-sdio;
 	no-mmc;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d32f08df743d..128542582b3d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -991,8 +991,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -1387,8 +1385,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
@@ -1726,8 +1722,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1835,8 +1831,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1883,8 +1879,8 @@
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
@@ -3108,6 +3104,7 @@
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -3161,11 +3158,11 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
 				#phy-cells = <0>;
 			};
 		};
@@ -3192,6 +3189,9 @@
 			bus-width = <4>;
 			dma-coherent;
 
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0x0>;
+
 			status = "disabled";
 
 			sdhc2_opp_table: opp-table {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 8166e3c1ff4e..cafde91b4721 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -437,20 +437,6 @@
 		};
 	};
 
-	/* 0 - lcd_reset */
-	/* 1 - lcd_pwr */
-	/* 2 - lcd_select */
-	/* 3 - backlight-enable */
-	/* 4 - Touch_shdwn */
-	/* 5 - LCD_H_pol */
-	/* 6 - lcd_V_pol */
-	gpio_exp1: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	touchscreen@26 {
 		compatible = "ilitek,ili2117";
 		reg = <0x26>;
@@ -482,6 +468,16 @@
 			};
 		};
 	};
+
+	gpio_exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+				  "backlight-enable", "Touch_shdwn",
+				  "LCD_H_pol", "lcd_V_pol";
+	};
 };
 
 &lvds0 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 151e32ac0368..ec7c7851519f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -49,17 +49,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 3053b4b21497..3ed31ffd73a2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -49,17 +49,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index c2f152bcf10e..4092c0016035 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -577,7 +577,7 @@
 			reg = <0 0xe6540000 0 0x60>;
 			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
@@ -594,7 +594,7 @@
 			reg = <0 0xe6550000 0 0x60>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 515>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
@@ -611,7 +611,7 @@
 			reg = <0 0xe6560000 0 0x60>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
@@ -628,7 +628,7 @@
 			reg = <0 0xe66a0000 0 0x60>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 517>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
@@ -657,7 +657,7 @@
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
@@ -674,7 +674,7 @@
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
@@ -691,7 +691,7 @@
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 704>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
@@ -708,7 +708,7 @@
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
-				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index d70f0600ae5a..d58b18802cb0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -326,7 +326,7 @@
 			reg = <0 0xe6540000 0 96>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g043.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
index 689aa4ba416b..a4738842f064 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -5,7 +5,6 @@
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/r9a07g043-cpg.h>
 
 / {
@@ -107,11 +106,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x10049c00 0 0x400>;
-			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -128,11 +126,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a000 0 0x400>;
-			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -149,11 +146,9 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -170,11 +165,10 @@
 			compatible = "renesas,r9a07g043-ssi",
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a800 0 0x400>;
-			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -190,9 +184,9 @@
 		spi0: spi@1004ac00 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004ac00 0 0x400>;
-			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(415) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(413) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(414) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
 			resets = <&cpg R9A07G043_RSPI0_RST>;
@@ -208,9 +202,9 @@
 		spi1: spi@1004b000 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004b000 0 0x400>;
-			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(418) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(416) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(417) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
 			resets = <&cpg R9A07G043_RSPI1_RST>;
@@ -226,9 +220,9 @@
 		spi2: spi@1004b400 {
 			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
 			reg = <0 0x1004b400 0 0x400>;
-			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(421) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(419) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(420) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
 			resets = <&cpg R9A07G043_RSPI2_RST>;
@@ -245,12 +239,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004b800 0 0x400>;
-			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(380) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(382) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(383) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(381) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
@@ -264,12 +258,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004bc00 0 0x400>;
-			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(385) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(387) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(388) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(386) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
@@ -283,12 +277,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c000 0 0x400>;
-			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(390) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(392) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(393) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(391) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
@@ -302,12 +296,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c400 0 0x400>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(395) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(397) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(398) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(396) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
@@ -321,12 +315,12 @@
 			compatible = "renesas,scif-r9a07g043",
 				     "renesas,scif-r9a07g044";
 			reg = <0 0x1004c800 0 0x400>;
-			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(400) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(402) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(403) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(401) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi",
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
@@ -339,10 +333,10 @@
 		sci0: serial@1004d000 {
 			compatible = "renesas,r9a07g043-sci", "renesas,sci";
 			reg = <0 0x1004d000 0 0x400>;
-			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(405) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(406) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(407) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(408) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
 			clock-names = "fck";
@@ -354,10 +348,10 @@
 		sci1: serial@1004d400 {
 			compatible = "renesas,r9a07g043-sci", "renesas,sci";
 			reg = <0 0x1004d400 0 0x400>;
-			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(409) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(410) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(411) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(412) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
 			clock-names = "fck";
@@ -369,14 +363,14 @@
 		canfd: can@10050000 {
 			compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
 			reg = <0 0x10050000 0 0x8000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(426) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(427) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(422) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(424) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(428) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(423) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(425) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(429) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "g_err", "g_recc",
 					  "ch0_err", "ch0_rec", "ch0_trx",
 					  "ch1_err", "ch1_rec", "ch1_trx";
@@ -405,14 +399,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058000 0 0x400>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(350) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(348) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(349) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(352) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(353) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(351) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(354) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(355) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
@@ -427,14 +421,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058400 0 0x400>;
-			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(358) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(356) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(357) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(360) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(361) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(359) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(362) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(363) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
@@ -449,14 +443,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058800 0 0x400>;
-			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(366) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(364) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(365) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(368) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(369) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(367) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(370) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(371) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
@@ -471,14 +465,14 @@
 			#size-cells = <0>;
 			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
 			reg = <0 0x10058c00 0 0x400>;
-			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(374) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(372) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(373) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(376) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(377) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(375) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(378) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(379) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tei", "ri", "ti", "spi", "sti",
 					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
@@ -491,7 +485,7 @@
 		adc: adc@10059000 {
 			compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
 			reg = <0 0x10059000 0 0x400>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(347) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
 				 <&cpg CPG_MOD R9A07G043_ADC_PCLK>;
 			clock-names = "adclk", "pclk";
@@ -551,10 +545,10 @@
 		sysc: system-controller@11020000 {
 			compatible = "renesas,r9a07g043-sysc";
 			reg = <0 0x11020000 0 0x10000>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "lpm_int", "ca55stbydone_int",
 					  "cm33stbyr_int", "ca55_deny";
 			status = "disabled";
@@ -578,23 +572,23 @@
 				     "renesas,rz-dmac";
 			reg = <0 0x11820000 0 0x10000>,
 			      <0 0x11830000 0 0x10000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(141) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(125) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(126) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(127) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(128) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(129) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(130) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(132) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(133) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(134) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(135) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(136) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(137) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(138) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(139) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(140) IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -623,8 +617,8 @@
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
 				 <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
 				 <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
@@ -639,8 +633,8 @@
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
 				 <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
 				 <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
@@ -655,9 +649,9 @@
 			compatible = "renesas,r9a07g043-gbeth",
 				     "renesas,rzg2l-gbeth";
 			reg = <0 0x11c20000 0 0x10000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(85) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(86) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mux", "fil", "arp_ns";
 			phy-mode = "rgmii";
 			clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
@@ -675,9 +669,9 @@
 			compatible = "renesas,r9a07g043-gbeth",
 				     "renesas,rzg2l-gbeth";
 			reg = <0 0x11c30000 0 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(87) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(88) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(89) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mux", "fil", "arp_ns";
 			phy-mode = "rgmii";
 			clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
@@ -705,7 +699,7 @@
 		ohci0: usb@11c50000 {
 			compatible = "generic-ohci";
 			reg = <0 0x11c50000 0 0x100>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>,
@@ -719,7 +713,7 @@
 		ohci1: usb@11c70000 {
 			compatible = "generic-ohci";
 			reg = <0 0x11c70000 0 0x100>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(96) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>,
@@ -733,7 +727,7 @@
 		ehci0: usb@11c50100 {
 			compatible = "generic-ehci";
 			reg = <0 0x11c50100 0 0x100>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>,
@@ -748,7 +742,7 @@
 		ehci1: usb@11c70100 {
 			compatible = "generic-ehci";
 			reg = <0 0x11c70100 0 0x100>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(97) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>,
@@ -764,7 +758,7 @@
 			compatible = "renesas,usb2-phy-r9a07g043",
 				     "renesas,rzg2l-usb2-phy";
 			reg = <0 0x11c50200 0 0x700>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(94) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>;
@@ -777,7 +771,7 @@
 			compatible = "renesas,usb2-phy-r9a07g043",
 				     "renesas,rzg2l-usb2-phy";
 			reg = <0 0x11c70200 0 0x700>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(99) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>;
@@ -790,10 +784,10 @@
 			compatible = "renesas,usbhs-r9a07g043",
 				     "renesas,rza2-usbhs";
 			reg = <0 0x11c60000 0 0x10000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(102) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(103) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
 			resets = <&phyrst 0>,
@@ -812,8 +806,8 @@
 			clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
 				 <&cpg CPG_MOD R9A07G043_WDT0_CLK>;
 			clock-names = "pclk", "oscclk";
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(49) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "wdt", "perrout";
 			resets = <&cpg R9A07G043_WDT0_PRESETN>;
 			power-domains = <&cpg>;
@@ -839,7 +833,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801000 0x0 0x400>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
 			resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
 			power-domains = <&cpg>;
@@ -850,7 +844,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801400 0x0 0x400>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
 			resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
 			power-domains = <&cpg>;
@@ -861,7 +855,7 @@
 			compatible = "renesas,r9a07g043-ostm",
 				     "renesas,ostm";
 			reg = <0x0 0x12801800 0x0 0x400>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <SOC_PERIPHERAL_IRQ(48) IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
 			resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
 			power-domains = <&cpg>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
new file mode 100644
index 000000000000..96f935bc2d4d
--- /dev/null
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI nr
+
+#include "r9a07g043.dtsi"
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
index 059885a01ede..01483b4302c2 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
@@ -17,7 +17,7 @@
 #define SW_SW0_DEV_SEL	1
 #define SW_ET0_EN_N	1
 
-#include "r9a07g043.dtsi"
+#include "r9a07g043u.dtsi"
 #include "rzg2ul-smarc-som.dtsi"
 #include "rzg2ul-smarc.dtsi"
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 2283d4fb8736..7dbf6a6292f4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -174,9 +174,8 @@
 			reg = <0 0x10049c00 0 0x400>;
 			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -195,9 +194,8 @@
 			reg = <0 0x1004a000 0 0x400>;
 			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -215,10 +213,8 @@
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
 			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupt-names = "int_req", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -237,9 +233,8 @@
 			reg = <0 0x1004a800 0 0x400>;
 			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 358d4c34465f..e000510b90a4 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -174,9 +174,8 @@
 			reg = <0 0x10049c00 0 0x400>;
 			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -195,9 +194,8 @@
 			reg = <0 0x1004a000 0 0x400>;
 			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -215,10 +213,8 @@
 				     "renesas,rz-ssi";
 			reg = <0 0x1004a400 0 0x400>;
 			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+			interrupt-names = "int_req", "dma_rt";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
@@ -237,9 +233,8 @@
 			reg = <0 0x1004a800 0 0x400>;
 			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
 			clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>,
 				 <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>,
 				 <&audio_clk1>, <&audio_clk2>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index fb1a97202c38..ebaa8cdd747d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -48,7 +48,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@82000000 {
+		gic: interrupt-controller@82010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
@@ -126,7 +126,7 @@
 		i2c0: i2c@a4030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030000 0 0x80>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
@@ -140,7 +140,7 @@
 		i2c2: i2c@a4030100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
 			reg = <0 0xa4030100 0 0x80>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index c4faff092380..fee53c25fc80 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -100,7 +100,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
@@ -128,7 +128,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 78e6e2376b01..5ff66aa6f8ba 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -77,7 +77,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
index 2a0feb53f0dc..b62973bc2f0d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -80,7 +80,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
@@ -107,7 +107,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 408871c2859d..588b14b66b6f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -393,7 +393,7 @@
 	};
 
 	scif1_pins: scif1 {
-		groups = "scif1_data_b", "scif1_ctrl";
+		groups = "scif1_data_b";
 		function = "scif1";
 	};
 
@@ -447,7 +447,6 @@
 &scif1 {
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";
-	uart-has-rtscts;
 
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index aa22a0c22265..5d5d9574088c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -96,7 +96,6 @@
 			linux,default-trigger = "heartbeat";
 			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
 			default-state = "on";
-			mode = <0x23>;
 		};
 
 		user_led: led-1 {
@@ -104,7 +103,6 @@
 			linux,default-trigger = "mmc1";
 			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
-			mode = <0x05>;
 		};
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index 6e29e74f6fc6..783120e9cebe 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -111,7 +111,7 @@
 		};
 	};
 
-	dmc_opp_table: dmc_opp_table {
+	dmc_opp_table: opp-table-3 {
 		compatible = "operating-points-v2";
 
 		opp00 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 2e058c315025..fccc2b2f327d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -83,6 +83,13 @@
 	};
 };
 
+&cpu_alert0 {
+	temperature = <65000>;
+};
+&cpu_alert1 {
+	temperature = <68000>;
+};
+
 &cpu_l0 {
 	cpu-supply = <&vdd_cpu_l>;
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index f9884902f874..c3f53aa1ea4a 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -548,9 +548,8 @@
 &sdhci {
 	max-frequency = <150000000>;
 	bus-width = <8>;
-	mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
 	non-removable;
-	mmc-hs400-enhanced-strobe;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 1f76d3501bda..9bdc0b93001f 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -45,7 +45,7 @@
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "lpo";
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_enable_h>;
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
@@ -645,9 +645,9 @@
 };
 
 &sdhci {
+	max-frequency = <150000000>;
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 92c2207e686c..59858f2dc8b9 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2221,13 +2221,11 @@
 		pcfg_input_pull_up: pcfg-input-pull-up {
 			input-enable;
 			bias-pull-up;
-			drive-strength = <2>;
 		};
 
 		pcfg_input_pull_down: pcfg-input-pull-down {
 			input-enable;
 			bias-pull-down;
-			drive-strength = <2>;
 		};
 
 		clock {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index e00568a6be5c..6ba562b922e6 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -28,6 +28,16 @@
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&vcc12v_dcin>;
 	};
+
+	vcc_sd_pwr: vcc-sd-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
 };
 
 &gmac1 {
@@ -119,13 +129,7 @@
 };
 
 &sdmmc0 {
-	vmmc-supply = <&sdmmc_pwr>;
-	status = "okay";
-};
-
-&sdmmc_pwr {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
+	vmmc-supply = <&vcc_sd_pwr>;
 	status = "okay";
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 5bcd4be32964..ba56ca2e66c8 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -92,16 +92,6 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
-
-	sdmmc_pwr: sdmmc-pwr-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr_h>;
-		regulator-name = "sdmmc_pwr";
-		status = "disabled";
-	};
 };
 
 &cpu0 {
@@ -143,6 +133,24 @@
 	status = "disabled";
 };
 
+&gpio0 {
+	nextrst-hog {
+		gpio-hog;
+		/*
+		 * GPIO_ACTIVE_LOW + output-low here means that the pin is set
+		 * to high, because output-low decides the value pre-inversion.
+		 */
+		gpios = <RK_PA5 GPIO_ACTIVE_LOW>;
+		line-name = "nEXTRST";
+		output-low;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -480,12 +488,6 @@
 			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
-
-	sdmmc-pwr {
-		sdmmc_pwr_h: sdmmc-pwr-h {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
 };
 
 &pmu_io_domains {
@@ -540,7 +542,7 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sys>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 539ef8cc7792..bab46db2b18c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -521,6 +521,8 @@
 };
 
 &i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
 	rockchip,trcm-sync-tx-only;
 	status = "okay";
 };
@@ -642,7 +644,7 @@
 	disable-wp;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index ba67b58f05b7..f1be76a54ceb 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -94,9 +94,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0400000 0x0 0x00400000>,
 		      <0x0 0xfe270000 0x0 0x00010000>,
-		      <0x3 0x7f000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X1_POWERUP>;
 		reset-names = "pipe";
@@ -146,9 +147,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0800000 0x0 0x00400000>,
 		      <0x0 0xfe280000 0x0 0x00010000>,
-		      <0x3 0xbf000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X2_POWERUP>;
 		reset-names = "pipe";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 164708f1eb67..234b5bbda120 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -951,7 +951,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		reg = <0x3 0xc0000000 0x0 0x00400000>,
 		      <0x0 0xfe260000 0x0 0x00010000>,
-		      <0x3 0x3f000000 0x0 0x01000000>;
+		      <0x0 0xf4000000 0x0 0x00100000>;
 		reg-names = "dbi", "apb", "config";
 		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -966,6 +966,7 @@
 		clock-names = "aclk_mst", "aclk_slv",
 			      "aclk_dbi", "pclk", "aux";
 		device_type = "pci";
+		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &pcie_intc 0>,
 				<0 0 0 2 &pcie_intc 1>,
@@ -980,8 +981,9 @@
 		phys = <&combphy2 PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3568_PD_PIPE>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
-			  0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>;
 		resets = <&cru SRST_PCIE20_POWERUP>;
 		reset-names = "pipe";
 		#address-cells = <3>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
index 7069f51bc120..99136adb1857 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
@@ -24,7 +24,7 @@
 	snps,dis_enblslpm_quirk;
 	snps,dis_u2_susphy_quirk;
 	snps,dis_u3_susphy_quirk;
-	snps,usb2_gadget_lpm_disable;
+	snps,usb2-gadget-lpm-disable;
 	phy-names = "usb2-phy", "usb3-phy";
 	phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
index a3cfa8113ffb..4c960f455461 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
@@ -24,7 +24,7 @@
 	snps,dis_enblslpm_quirk;
 	snps,dis_u2_susphy_quirk;
 	snps,dis_u3_susphy_quirk;
-	snps,usb2_gadget_lpm_disable;
+	snps,usb2-gadget-lpm-disable;
 	phy-names = "usb2-phy", "usb3-phy";
 	phys = <&usb1_hsphy0>, <&usb1_ssphy0>;
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index d0abb9aa0e9e..e3852c946352 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -55,14 +55,14 @@
 		samsung,pins = "gpf5-0";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	ufs_refclk_out: ufs-refclk-out-pins {
 		samsung,pins = "gpf5-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
@@ -239,105 +239,105 @@
 		samsung,pins = "gpb6-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb6-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV2>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c0_bus: hs-i2c0-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c1_bus: hs-i2c1-bus-pins {
 		samsung,pins = "gpb0-2", "gpb0-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c2_bus: hs-i2c2-bus-pins {
 		samsung,pins = "gpb0-4", "gpb0-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c3_bus: hs-i2c3-bus-pins {
 		samsung,pins = "gpb0-6", "gpb0-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c4_bus: hs-i2c4-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c5_bus: hs-i2c5-bus-pins {
 		samsung,pins = "gpb1-2", "gpb1-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c6_bus: hs-i2c6-bus-pins {
 		samsung,pins = "gpb1-4", "gpb1-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	hs_i2c7_bus: hs-i2c7-bus-pins {
 		samsung,pins = "gpb1-6", "gpb1-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart0_data: uart0-data-pins {
 		samsung,pins = "gpb7-0", "gpb7-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data-pins {
 		samsung,pins = "gpb7-4", "gpb7-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h linux-libre-6.1.56-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
index 6ffbda362493..c397d02208a0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
@@ -16,9 +16,9 @@
 #define FSD_PIN_PULL_UP			3
 
 #define FSD_PIN_DRV_LV1			0
-#define FSD_PIN_DRV_LV2			2
-#define FSD_PIN_DRV_LV3			1
-#define FSD_PIN_DRV_LV4			3
+#define FSD_PIN_DRV_LV2			1
+#define FSD_PIN_DRV_LV4			2
+#define FSD_PIN_DRV_LV6			3
 
 #define FSD_PIN_FUNC_INPUT		0
 #define FSD_PIN_FUNC_OUTPUT		1
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 03660476364f..eb8690a6be16 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -306,7 +306,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 172 0>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -316,7 +317,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 173 0>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -326,7 +328,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 174 0>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -351,7 +354,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -368,7 +371,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index f56c803560f2..df2d8f36a31b 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -42,6 +42,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 147 0>;
+		status = "disabled";
 	};
 
 	mcu_spi1: spi@4b10000 {
@@ -52,6 +53,7 @@
 		#size-cells = <0>;
 		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 148 0>;
+		status = "disabled";
 	};
 
 	mcu_gpio_intr: interrupt-controller@4210000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am625.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am625.dtsi
index 887f31c23fef..31b37abbb8d5 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am625.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -96,7 +96,7 @@
 	L2_0: l2-cache0 {
 		compatible = "cache";
 		cache-level = <2>;
-		cache-size = <0x40000>;
+		cache-size = <0x80000>;
 		cache-line-size = <64>;
 		cache-sets = <512>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 576dbce80ad8..b08a083d722d 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -26,8 +26,9 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
 	reserved-memory {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index 331d89fda29d..f1ebaec404fb 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -96,7 +96,7 @@
 	L2_0: l2-cache0 {
 		compatible = "cache";
 		cache-level = <2>;
-		cache-size = <0x40000>;
+		cache-size = <0x80000>;
 		cache-line-size = <64>;
 		cache-sets = <512>;
 	};
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 4005a73cfea9..ebb1c5ce7aec 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -120,7 +120,6 @@
 		dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
 				<&main_udmap 0x4003>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 7e8552fd2b6a..5840063f6129 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -80,28 +80,28 @@
 	};
 };
 
-&wkup_pmx0 {
+&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
-			J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
-			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
-			J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
-			J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
-			J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
-			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
-			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
-			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
-			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
-			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio1-pins-default {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
-			J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+			J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 		>;
 	};
 };
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index e5be78a58682..f04c6c890c33 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -56,7 +56,34 @@
 	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x4301c000 0x00 0x178>;
+		reg = <0x00 0x4301c000 0x00 0x34>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@0x4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@0x4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0xec>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@0x4301c174 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c174 0x00 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -386,7 +413,6 @@
 		dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
 		       <&mcu_udmap 0x7503>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@40910000 {
 			compatible = "inside-secure,safexcel-eip76";
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 917c9dc99efa..e9b36c419bec 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -337,7 +337,6 @@
 		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
 				<&main_udmap 0x4001>;
 		dma-names = "tx", "rx1", "rx2";
-		dma-coherent;
 
 		rng: rng@4e10000 {
 			compatible = "inside-secure,safexcel-eip76";
@@ -1094,7 +1093,6 @@
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
-		ti,strobe-sel = <0x77>;
 		dma-coherent;
 	};
 
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 34e7d577ae13..c89f28235812 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -60,7 +60,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <148>;
-		ti,interrupt-ranges = <8 360 56>;
+		ti,interrupt-ranges = <8 392 56>;
 	};
 
 	main_pmx0: pinctrl@11c000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..f0644851602c 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -65,7 +65,7 @@
 		#interrupt-cells = <1>;
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <125>;
-		ti,interrupt-ranges = <16 928 16>;
+		ti,interrupt-ranges = <16 960 16>;
 	};
 
 	mcu_conf: syscon@40f00000 {
diff --git linux-libre-6.1-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi linux-libre-6.1.56-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index a549265e55f6..7c1af75f33a0 100644
--- linux-libre-6.1-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ linux-libre-6.1.56-gnu/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -825,6 +825,7 @@
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x860>;
 				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
 				/* dma-coherent; */
 			};
 		};
@@ -851,6 +852,7 @@
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x861>;
 				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
 				/* dma-coherent; */
 			};
 		};
diff --git linux-libre-6.1-gnu/arch/arm64/configs/defconfig linux-libre-6.1.56-gnu/arch/arm64/configs/defconfig
index 0b6af3348e79..623e9f308f38 100644
--- linux-libre-6.1-gnu/arch/arm64/configs/defconfig
+++ linux-libre-6.1.56-gnu/arch/arm64/configs/defconfig
@@ -1050,7 +1050,6 @@ CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_VC5=y
-CONFIG_COMMON_CLK_NPCM8XX=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/Kconfig linux-libre-6.1.56-gnu/arch/arm64/crypto/Kconfig
index 8bd80508a710..4b121dc0cfba 100644
--- linux-libre-6.1-gnu/arch/arm64/crypto/Kconfig
+++ linux-libre-6.1.56-gnu/arch/arm64/crypto/Kconfig
@@ -96,6 +96,17 @@ config CRYPTO_SHA3_ARM64
 	  Architecture: arm64 using:
 	  - ARMv8.2 Crypto Extensions
 
+config CRYPTO_SM3_NEON
+	tristate "Hash functions: SM3 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SM3
+	help
+	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
 config CRYPTO_SM3_ARM64_CE
 	tristate "Hash functions: SM3 (ARMv8.2 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/Makefile linux-libre-6.1.56-gnu/arch/arm64/crypto/Makefile
index 24bb0c4610de..087f1625e775 100644
--- linux-libre-6.1-gnu/arch/arm64/crypto/Makefile
+++ linux-libre-6.1.56-gnu/arch/arm64/crypto/Makefile
@@ -17,6 +17,9 @@ sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o
 obj-$(CONFIG_CRYPTO_SHA3_ARM64) += sha3-ce.o
 sha3-ce-y := sha3-ce-glue.o sha3-ce-core.o
 
+obj-$(CONFIG_CRYPTO_SM3_NEON) += sm3-neon.o
+sm3-neon-y := sm3-neon-glue.o sm3-neon-core.o
+
 obj-$(CONFIG_CRYPTO_SM3_ARM64_CE) += sm3-ce.o
 sm3-ce-y := sm3-ce-glue.o sm3-ce-core.o
 
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/aes-neonbs-core.S linux-libre-6.1.56-gnu/arch/arm64/crypto/aes-neonbs-core.S
index d427f4556b6e..b2062eeee59e 100644
--- linux-libre-6.1-gnu/arch/arm64/crypto/aes-neonbs-core.S
+++ linux-libre-6.1.56-gnu/arch/arm64/crypto/aes-neonbs-core.S
@@ -15,6 +15,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 
 	.text
@@ -620,12 +621,12 @@ SYM_FUNC_END(aesbs_decrypt8)
 	.endm
 
 	.align		4
-SYM_FUNC_START(aesbs_ecb_encrypt)
+SYM_TYPED_FUNC_START(aesbs_ecb_encrypt)
 	__ecb_crypt	aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
 SYM_FUNC_END(aesbs_ecb_encrypt)
 
 	.align		4
-SYM_FUNC_START(aesbs_ecb_decrypt)
+SYM_TYPED_FUNC_START(aesbs_ecb_decrypt)
 	__ecb_crypt	aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
 SYM_FUNC_END(aesbs_ecb_decrypt)
 
@@ -799,11 +800,11 @@ SYM_FUNC_END(__xts_crypt8)
 	ret
 	.endm
 
-SYM_FUNC_START(aesbs_xts_encrypt)
+SYM_TYPED_FUNC_START(aesbs_xts_encrypt)
 	__xts_crypt	aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
 SYM_FUNC_END(aesbs_xts_encrypt)
 
-SYM_FUNC_START(aesbs_xts_decrypt)
+SYM_TYPED_FUNC_START(aesbs_xts_decrypt)
 	__xts_crypt	aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
 SYM_FUNC_END(aesbs_xts_decrypt)
 
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/sm3-neon-core.S linux-libre-6.1.56-gnu/arch/arm64/crypto/sm3-neon-core.S
new file mode 100644
index 000000000000..4357e0e51be3
--- /dev/null
+++ linux-libre-6.1.56-gnu/arch/arm64/crypto/sm3-neon-core.S
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sm3-neon-core.S - SM3 secure hash using NEON instructions
+ *
+ * Linux/arm64 port of the libgcrypt SM3 implementation for AArch64
+ *
+ * Copyright (C) 2021 Jussi Kivilinna <jussi.kivilinna@iki.fi>
+ * Copyright (c) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+
+/* Context structure */
+
+#define state_h0 0
+#define state_h1 4
+#define state_h2 8
+#define state_h3 12
+#define state_h4 16
+#define state_h5 20
+#define state_h6 24
+#define state_h7 28
+
+/* Stack structure */
+
+#define STACK_W_SIZE        (32 * 2 * 3)
+
+#define STACK_W             (0)
+#define STACK_SIZE          (STACK_W + STACK_W_SIZE)
+
+/* Register macros */
+
+#define RSTATE x0
+#define RDATA  x1
+#define RNBLKS x2
+#define RKPTR  x28
+#define RFRAME x29
+
+#define ra w3
+#define rb w4
+#define rc w5
+#define rd w6
+#define re w7
+#define rf w8
+#define rg w9
+#define rh w10
+
+#define t0 w11
+#define t1 w12
+#define t2 w13
+#define t3 w14
+#define t4 w15
+#define t5 w16
+#define t6 w17
+
+#define k_even w19
+#define k_odd w20
+
+#define addr0 x21
+#define addr1 x22
+
+#define s0 w23
+#define s1 w24
+#define s2 w25
+#define s3 w26
+
+#define W0 v0
+#define W1 v1
+#define W2 v2
+#define W3 v3
+#define W4 v4
+#define W5 v5
+
+#define XTMP0 v6
+#define XTMP1 v7
+#define XTMP2 v16
+#define XTMP3 v17
+#define XTMP4 v18
+#define XTMP5 v19
+#define XTMP6 v20
+
+/* Helper macros. */
+
+#define _(...) /*_*/
+
+#define clear_vec(x) \
+	movi	x.8h, #0;
+
+#define rolw(o, a, n) \
+	ror	o, a, #(32 - n);
+
+/* Round function macros. */
+
+#define GG1_1(x, y, z, o, t) \
+	eor	o, x, y;
+#define GG1_2(x, y, z, o, t) \
+	eor	o, o, z;
+#define GG1_3(x, y, z, o, t)
+
+#define FF1_1(x, y, z, o, t) GG1_1(x, y, z, o, t)
+#define FF1_2(x, y, z, o, t)
+#define FF1_3(x, y, z, o, t) GG1_2(x, y, z, o, t)
+
+#define GG2_1(x, y, z, o, t) \
+	bic	o, z, x;
+#define GG2_2(x, y, z, o, t) \
+	and	t, y, x;
+#define GG2_3(x, y, z, o, t) \
+	eor	o, o, t;
+
+#define FF2_1(x, y, z, o, t) \
+	eor	o, x, y;
+#define FF2_2(x, y, z, o, t) \
+	and	t, x, y; \
+	and	o, o, z;
+#define FF2_3(x, y, z, o, t) \
+	eor	o, o, t;
+
+#define R(i, a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	K_LOAD(round);                                                        \
+	ldr	t5, [sp, #(wtype##_W1_ADDR(round, widx))];                    \
+	rolw(t0, a, 12);                              /* rol(a, 12) => t0 */  \
+      IOP(1, iop_param);                                                      \
+	FF##i##_1(a, b, c, t1, t2);                                           \
+	ldr	t6, [sp, #(wtype##_W1W2_ADDR(round, widx))];                  \
+	add	k, k, e;                                                      \
+      IOP(2, iop_param);                                                      \
+	GG##i##_1(e, f, g, t3, t4);                                           \
+	FF##i##_2(a, b, c, t1, t2);                                           \
+      IOP(3, iop_param);                                                      \
+	add	k, k, t0;                                                     \
+	add	h, h, t5;                                                     \
+	add	d, d, t6;                     /* w1w2 + d => d */             \
+      IOP(4, iop_param);                                                      \
+	rolw(k, k, 7);                        /* rol (t0 + e + t), 7) => k */ \
+	GG##i##_2(e, f, g, t3, t4);                                           \
+	add	h, h, k;                      /* h + w1 + k => h */           \
+      IOP(5, iop_param);                                                      \
+	FF##i##_3(a, b, c, t1, t2);                                           \
+	eor	t0, t0, k;                    /* k ^ t0 => t0 */              \
+	GG##i##_3(e, f, g, t3, t4);                                           \
+	add	d, d, t1;                     /* FF(a,b,c) + d => d */        \
+      IOP(6, iop_param);                                                      \
+	add	t3, t3, h;                    /* GG(e,f,g) + h => t3 */       \
+	rolw(b, b, 9);                        /* rol(b, 9) => b */            \
+	eor	h, t3, t3, ror #(32-9);                                       \
+      IOP(7, iop_param);                                                      \
+	add	d, d, t0;                     /* t0 + d => d */               \
+	rolw(f, f, 19);                       /* rol(f, 19) => f */           \
+      IOP(8, iop_param);                                                      \
+	eor	h, h, t3, ror #(32-17);       /* P0(t3) => h */
+
+#define R1(a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	R(1, ##a, ##b, ##c, ##d, ##e, ##f, ##g, ##h, ##k, K_LOAD, round, widx, wtype, IOP, iop_param)
+
+#define R2(a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	R(2, ##a, ##b, ##c, ##d, ##e, ##f, ##g, ##h, ##k, K_LOAD, round, widx, wtype, IOP, iop_param)
+
+#define KL(round) \
+	ldp	k_even, k_odd, [RKPTR, #(4*(round))];
+
+/* Input expansion macros. */
+
+/* Byte-swapped input address. */
+#define IW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((round) / 4) * 64 + (offs) + ((widx) * 4))
+
+/* Expanded input address. */
+#define XW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((((round) / 3) - 4) % 2) * 64 + (offs) + ((widx) * 4))
+
+/* Rounds 1-12, byte-swapped input block addresses. */
+#define IW_W1_ADDR(round, widx)   IW_W_ADDR(round, widx, 32)
+#define IW_W1W2_ADDR(round, widx) IW_W_ADDR(round, widx, 48)
+
+/* Rounds 1-12, expanded input block addresses. */
+#define XW_W1_ADDR(round, widx)   XW_W_ADDR(round, widx, 0)
+#define XW_W1W2_ADDR(round, widx) XW_W_ADDR(round, widx, 16)
+
+/* Input block loading.
+ * Interleaving within round function needed for in-order CPUs. */
+#define LOAD_W_VEC_1_1() \
+	add	addr0, sp, #IW_W1_ADDR(0, 0);
+#define LOAD_W_VEC_1_2() \
+	add	addr1, sp, #IW_W1_ADDR(4, 0);
+#define LOAD_W_VEC_1_3() \
+	ld1	{W0.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_4() \
+	ld1	{W1.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_5() \
+	ld1	{W2.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_6() \
+	ld1	{W3.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_7() \
+	rev32	XTMP0.16b, W0.16b;
+#define LOAD_W_VEC_1_8() \
+	rev32	XTMP1.16b, W1.16b;
+#define LOAD_W_VEC_2_1() \
+	rev32	XTMP2.16b, W2.16b;
+#define LOAD_W_VEC_2_2() \
+	rev32	XTMP3.16b, W3.16b;
+#define LOAD_W_VEC_2_3() \
+	eor	XTMP4.16b, XTMP1.16b, XTMP0.16b;
+#define LOAD_W_VEC_2_4() \
+	eor	XTMP5.16b, XTMP2.16b, XTMP1.16b;
+#define LOAD_W_VEC_2_5() \
+	st1	{XTMP0.16b}, [addr0], #16;
+#define LOAD_W_VEC_2_6() \
+	st1	{XTMP4.16b}, [addr0]; \
+	add	addr0, sp, #IW_W1_ADDR(8, 0);
+#define LOAD_W_VEC_2_7() \
+	eor	XTMP6.16b, XTMP3.16b, XTMP2.16b;
+#define LOAD_W_VEC_2_8() \
+	ext	W0.16b, XTMP0.16b, XTMP0.16b, #8;  /* W0: xx, w0, xx, xx */
+#define LOAD_W_VEC_3_1() \
+	mov	W2.16b, XTMP1.16b;                 /* W2: xx, w6, w5, w4 */
+#define LOAD_W_VEC_3_2() \
+	st1	{XTMP1.16b}, [addr1], #16;
+#define LOAD_W_VEC_3_3() \
+	st1	{XTMP5.16b}, [addr1]; \
+	ext	W1.16b, XTMP0.16b, XTMP0.16b, #4;  /* W1: xx, w3, w2, w1 */
+#define LOAD_W_VEC_3_4() \
+	ext	W3.16b, XTMP1.16b, XTMP2.16b, #12; /* W3: xx, w9, w8, w7 */
+#define LOAD_W_VEC_3_5() \
+	ext	W4.16b, XTMP2.16b, XTMP3.16b, #8;  /* W4: xx, w12, w11, w10 */
+#define LOAD_W_VEC_3_6() \
+	st1	{XTMP2.16b}, [addr0], #16;
+#define LOAD_W_VEC_3_7() \
+	st1	{XTMP6.16b}, [addr0];
+#define LOAD_W_VEC_3_8() \
+	ext	W5.16b, XTMP3.16b, XTMP3.16b, #4;  /* W5: xx, w15, w14, w13 */
+
+#define LOAD_W_VEC_1(iop_num, ...) \
+	LOAD_W_VEC_1_##iop_num()
+#define LOAD_W_VEC_2(iop_num, ...) \
+	LOAD_W_VEC_2_##iop_num()
+#define LOAD_W_VEC_3(iop_num, ...) \
+	LOAD_W_VEC_3_##iop_num()
+
+/* Message scheduling. Note: 3 words per vector register.
+ * Interleaving within round function needed for in-order CPUs. */
+#define SCHED_W_1_1(round, w0, w1, w2, w3, w4, w5) \
+	/* Load (w[i - 16]) => XTMP0 */            \
+	/* Load (w[i - 13]) => XTMP5 */            \
+	ext	XTMP0.16b, w0.16b, w0.16b, #12;    /* XTMP0: w0, xx, xx, xx */
+#define SCHED_W_1_2(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP5.16b, w1.16b, w1.16b, #12;
+#define SCHED_W_1_3(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP0.16b, XTMP0.16b, w1.16b, #12; /* XTMP0: xx, w2, w1, w0 */
+#define SCHED_W_1_4(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP5.16b, XTMP5.16b, w2.16b, #12;
+#define SCHED_W_1_5(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 9] == w3 */                       \
+	/* W3 ^ XTMP0 => XTMP0 */                  \
+	eor	XTMP0.16b, XTMP0.16b, w3.16b;
+#define SCHED_W_1_6(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 3] == w5 */                       \
+	/* rol(XMM5, 15) ^ XTMP0 => XTMP0 */       \
+	/* rol(XTMP5, 7) => XTMP1 */               \
+	add	addr0, sp, #XW_W1_ADDR((round), 0); \
+	shl	XTMP2.4s, w5.4s, #15;
+#define SCHED_W_1_7(round, w0, w1, w2, w3, w4, w5) \
+	shl	XTMP1.4s, XTMP5.4s, #7;
+#define SCHED_W_1_8(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP2.4s, w5.4s, #(32-15);
+#define SCHED_W_2_1(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP1.4s, XTMP5.4s, #(32-7);
+#define SCHED_W_2_2(round, w0, w1, w2, w3, w4, w5) \
+	eor	XTMP0.16b, XTMP0.16b, XTMP2.16b;
+#define SCHED_W_2_3(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 6] == W4 */                       \
+	/* W4 ^ XTMP1 => XTMP1 */                  \
+	eor	XTMP1.16b, XTMP1.16b, w4.16b;
+#define SCHED_W_2_4(round, w0, w1, w2, w3, w4, w5) \
+	/* P1(XTMP0) ^ XTMP1 => W0 */              \
+	shl	XTMP3.4s, XTMP0.4s, #15;
+#define SCHED_W_2_5(round, w0, w1, w2, w3, w4, w5) \
+	shl	XTMP4.4s, XTMP0.4s, #23;
+#define SCHED_W_2_6(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, XTMP1.16b, XTMP0.16b;
+#define SCHED_W_2_7(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP3.4s, XTMP0.4s, #(32-15);
+#define SCHED_W_2_8(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP4.4s, XTMP0.4s, #(32-23);
+#define SCHED_W_3_1(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, w0.16b, XTMP3.16b;
+#define SCHED_W_3_2(round, w0, w1, w2, w3, w4, w5) \
+	/* Load (w[i - 3]) => XTMP2 */             \
+	ext	XTMP2.16b, w4.16b, w4.16b, #12;
+#define SCHED_W_3_3(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, w0.16b, XTMP4.16b;
+#define SCHED_W_3_4(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP2.16b, XTMP2.16b, w5.16b, #12;
+#define SCHED_W_3_5(round, w0, w1, w2, w3, w4, w5) \
+	/* W1 ^ W2 => XTMP3 */                     \
+	eor	XTMP3.16b, XTMP2.16b, w0.16b;
+#define SCHED_W_3_6(round, w0, w1, w2, w3, w4, w5)
+#define SCHED_W_3_7(round, w0, w1, w2, w3, w4, w5) \
+	st1	{XTMP2.16b-XTMP3.16b}, [addr0];
+#define SCHED_W_3_8(round, w0, w1, w2, w3, w4, w5)
+
+#define SCHED_W_W0W1W2W3W4W5_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W0, W1, W2, W3, W4, W5)
+#define SCHED_W_W0W1W2W3W4W5_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W0, W1, W2, W3, W4, W5)
+#define SCHED_W_W0W1W2W3W4W5_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W0, W1, W2, W3, W4, W5)
+
+#define SCHED_W_W1W2W3W4W5W0_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W1, W2, W3, W4, W5, W0)
+#define SCHED_W_W1W2W3W4W5W0_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W1, W2, W3, W4, W5, W0)
+#define SCHED_W_W1W2W3W4W5W0_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W1, W2, W3, W4, W5, W0)
+
+#define SCHED_W_W2W3W4W5W0W1_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W2, W3, W4, W5, W0, W1)
+#define SCHED_W_W2W3W4W5W0W1_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W2, W3, W4, W5, W0, W1)
+#define SCHED_W_W2W3W4W5W0W1_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W2, W3, W4, W5, W0, W1)
+
+#define SCHED_W_W3W4W5W0W1W2_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W3, W4, W5, W0, W1, W2)
+#define SCHED_W_W3W4W5W0W1W2_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W3, W4, W5, W0, W1, W2)
+#define SCHED_W_W3W4W5W0W1W2_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W3, W4, W5, W0, W1, W2)
+
+#define SCHED_W_W4W5W0W1W2W3_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W4, W5, W0, W1, W2, W3)
+#define SCHED_W_W4W5W0W1W2W3_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W4, W5, W0, W1, W2, W3)
+#define SCHED_W_W4W5W0W1W2W3_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W4, W5, W0, W1, W2, W3)
+
+#define SCHED_W_W5W0W1W2W3W4_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W5, W0, W1, W2, W3, W4)
+#define SCHED_W_W5W0W1W2W3W4_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W5, W0, W1, W2, W3, W4)
+#define SCHED_W_W5W0W1W2W3W4_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W5, W0, W1, W2, W3, W4)
+
+
+	/*
+	 * Transform blocks*64 bytes (blocks*16 32-bit words) at 'src'.
+	 *
+	 * void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
+	 *                         int blocks)
+	 */
+	.text
+.align 3
+SYM_TYPED_FUNC_START(sm3_neon_transform)
+	ldp		ra, rb, [RSTATE, #0]
+	ldp		rc, rd, [RSTATE, #8]
+	ldp		re, rf, [RSTATE, #16]
+	ldp		rg, rh, [RSTATE, #24]
+
+	stp		x28, x29, [sp, #-16]!
+	stp		x19, x20, [sp, #-16]!
+	stp		x21, x22, [sp, #-16]!
+	stp		x23, x24, [sp, #-16]!
+	stp		x25, x26, [sp, #-16]!
+	mov		RFRAME, sp
+
+	sub		addr0, sp, #STACK_SIZE
+	adr_l		RKPTR, .LKtable
+	and		sp, addr0, #(~63)
+
+	/* Preload first block. */
+	LOAD_W_VEC_1(1, 0)
+	LOAD_W_VEC_1(2, 0)
+	LOAD_W_VEC_1(3, 0)
+	LOAD_W_VEC_1(4, 0)
+	LOAD_W_VEC_1(5, 0)
+	LOAD_W_VEC_1(6, 0)
+	LOAD_W_VEC_1(7, 0)
+	LOAD_W_VEC_1(8, 0)
+	LOAD_W_VEC_2(1, 0)
+	LOAD_W_VEC_2(2, 0)
+	LOAD_W_VEC_2(3, 0)
+	LOAD_W_VEC_2(4, 0)
+	LOAD_W_VEC_2(5, 0)
+	LOAD_W_VEC_2(6, 0)
+	LOAD_W_VEC_2(7, 0)
+	LOAD_W_VEC_2(8, 0)
+	LOAD_W_VEC_3(1, 0)
+	LOAD_W_VEC_3(2, 0)
+	LOAD_W_VEC_3(3, 0)
+	LOAD_W_VEC_3(4, 0)
+	LOAD_W_VEC_3(5, 0)
+	LOAD_W_VEC_3(6, 0)
+	LOAD_W_VEC_3(7, 0)
+	LOAD_W_VEC_3(8, 0)
+
+.balign 16
+.Loop:
+	/* Transform 0-3 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 0, 0, IW, _, 0)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  1, 1, IW, _, 0)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 2, 2, IW, _, 0)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  3, 3, IW, _, 0)
+
+	/* Transform 4-7 + Precalc 12-14 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 4, 0, IW, _, 0)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  5, 1, IW, _, 0)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 6, 2, IW, SCHED_W_W0W1W2W3W4W5_1, 12)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  7, 3, IW, SCHED_W_W0W1W2W3W4W5_2, 12)
+
+	/* Transform 8-11 + Precalc 12-17 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 8, 0, IW, SCHED_W_W0W1W2W3W4W5_3, 12)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  9, 1, IW, SCHED_W_W1W2W3W4W5W0_1, 15)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 10, 2, IW, SCHED_W_W1W2W3W4W5W0_2, 15)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  11, 3, IW, SCHED_W_W1W2W3W4W5W0_3, 15)
+
+	/* Transform 12-14 + Precalc 18-20 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 12, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 18)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  13, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 18)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 14, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 18)
+
+	/* Transform 15-17 + Precalc 21-23 */
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  15, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 21)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 16, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 21)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  17, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 21)
+
+	/* Transform 18-20 + Precalc 24-26 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 18, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 24)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  19, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 24)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 20, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 24)
+
+	/* Transform 21-23 + Precalc 27-29 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  21, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 27)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 22, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 27)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  23, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 27)
+
+	/* Transform 24-26 + Precalc 30-32 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 24, 0, XW, SCHED_W_W0W1W2W3W4W5_1, 30)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  25, 1, XW, SCHED_W_W0W1W2W3W4W5_2, 30)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 26, 2, XW, SCHED_W_W0W1W2W3W4W5_3, 30)
+
+	/* Transform 27-29 + Precalc 33-35 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  27, 0, XW, SCHED_W_W1W2W3W4W5W0_1, 33)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 28, 1, XW, SCHED_W_W1W2W3W4W5W0_2, 33)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  29, 2, XW, SCHED_W_W1W2W3W4W5W0_3, 33)
+
+	/* Transform 30-32 + Precalc 36-38 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 30, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 36)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  31, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 36)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 32, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 36)
+
+	/* Transform 33-35 + Precalc 39-41 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  33, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 39)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 34, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 39)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  35, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 39)
+
+	/* Transform 36-38 + Precalc 42-44 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 36, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 42)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  37, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 42)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 38, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 42)
+
+	/* Transform 39-41 + Precalc 45-47 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  39, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 45)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 40, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 45)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  41, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 45)
+
+	/* Transform 42-44 + Precalc 48-50 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 42, 0, XW, SCHED_W_W0W1W2W3W4W5_1, 48)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  43, 1, XW, SCHED_W_W0W1W2W3W4W5_2, 48)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 44, 2, XW, SCHED_W_W0W1W2W3W4W5_3, 48)
+
+	/* Transform 45-47 + Precalc 51-53 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  45, 0, XW, SCHED_W_W1W2W3W4W5W0_1, 51)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 46, 1, XW, SCHED_W_W1W2W3W4W5W0_2, 51)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  47, 2, XW, SCHED_W_W1W2W3W4W5W0_3, 51)
+
+	/* Transform 48-50 + Precalc 54-56 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 48, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 54)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  49, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 54)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 50, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 54)
+
+	/* Transform 51-53 + Precalc 57-59 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  51, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 57)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 52, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 57)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  53, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 57)
+
+	/* Transform 54-56 + Precalc 60-62 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 54, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 60)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  55, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 60)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 56, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 60)
+
+	/* Transform 57-59 + Precalc 63 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  57, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 63)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 58, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 63)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  59, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 63)
+
+	/* Transform 60 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 60, 0, XW, _, _)
+	subs		RNBLKS, RNBLKS, #1
+	b.eq		.Lend
+
+	/* Transform 61-63 + Preload next block */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  61, 1, XW, LOAD_W_VEC_1, _)
+	ldp		s0, s1, [RSTATE, #0]
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 62, 2, XW, LOAD_W_VEC_2, _)
+	ldp		s2, s3, [RSTATE, #8]
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  63, 0, XW, LOAD_W_VEC_3, _)
+
+	/* Update the chaining variables. */
+	eor		ra, ra, s0
+	eor		rb, rb, s1
+	ldp		s0, s1, [RSTATE, #16]
+	eor		rc, rc, s2
+	ldp		k_even, k_odd, [RSTATE, #24]
+	eor		rd, rd, s3
+	eor		re, re, s0
+	stp		ra, rb, [RSTATE, #0]
+	eor		rf, rf, s1
+	stp		rc, rd, [RSTATE, #8]
+	eor		rg, rg, k_even
+	stp		re, rf, [RSTATE, #16]
+	eor		rh, rh, k_odd
+	stp		rg, rh, [RSTATE, #24]
+	b		.Loop
+
+.Lend:
+	/* Transform 61-63 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  61, 1, XW, _, _)
+	ldp		s0, s1, [RSTATE, #0]
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 62, 2, XW, _, _)
+	ldp		s2, s3, [RSTATE, #8]
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  63, 0, XW, _, _)
+
+	/* Update the chaining variables. */
+	eor		ra, ra, s0
+	clear_vec(W0)
+	eor		rb, rb, s1
+	clear_vec(W1)
+	ldp		s0, s1, [RSTATE, #16]
+	clear_vec(W2)
+	eor		rc, rc, s2
+	clear_vec(W3)
+	ldp		k_even, k_odd, [RSTATE, #24]
+	clear_vec(W4)
+	eor		rd, rd, s3
+	clear_vec(W5)
+	eor		re, re, s0
+	clear_vec(XTMP0)
+	stp		ra, rb, [RSTATE, #0]
+	clear_vec(XTMP1)
+	eor		rf, rf, s1
+	clear_vec(XTMP2)
+	stp		rc, rd, [RSTATE, #8]
+	clear_vec(XTMP3)
+	eor		rg, rg, k_even
+	clear_vec(XTMP4)
+	stp		re, rf, [RSTATE, #16]
+	clear_vec(XTMP5)
+	eor		rh, rh, k_odd
+	clear_vec(XTMP6)
+	stp		rg, rh, [RSTATE, #24]
+
+	/* Clear message expansion area */
+	add		addr0, sp, #STACK_W
+	st1		{W0.16b-W3.16b}, [addr0], #64
+	st1		{W0.16b-W3.16b}, [addr0], #64
+	st1		{W0.16b-W3.16b}, [addr0]
+
+	mov		sp, RFRAME
+
+	ldp		x25, x26, [sp], #16
+	ldp		x23, x24, [sp], #16
+	ldp		x21, x22, [sp], #16
+	ldp		x19, x20, [sp], #16
+	ldp		x28, x29, [sp], #16
+
+	ret
+SYM_FUNC_END(sm3_neon_transform)
+
+
+	.section	".rodata", "a"
+
+	.align 4
+.LKtable:
+	.long 0x79cc4519, 0xf3988a32, 0xe7311465, 0xce6228cb
+	.long 0x9cc45197, 0x3988a32f, 0x7311465e, 0xe6228cbc
+	.long 0xcc451979, 0x988a32f3, 0x311465e7, 0x6228cbce
+	.long 0xc451979c, 0x88a32f39, 0x11465e73, 0x228cbce6
+	.long 0x9d8a7a87, 0x3b14f50f, 0x7629ea1e, 0xec53d43c
+	.long 0xd8a7a879, 0xb14f50f3, 0x629ea1e7, 0xc53d43ce
+	.long 0x8a7a879d, 0x14f50f3b, 0x29ea1e76, 0x53d43cec
+	.long 0xa7a879d8, 0x4f50f3b1, 0x9ea1e762, 0x3d43cec5
+	.long 0x7a879d8a, 0xf50f3b14, 0xea1e7629, 0xd43cec53
+	.long 0xa879d8a7, 0x50f3b14f, 0xa1e7629e, 0x43cec53d
+	.long 0x879d8a7a, 0x0f3b14f5, 0x1e7629ea, 0x3cec53d4
+	.long 0x79d8a7a8, 0xf3b14f50, 0xe7629ea1, 0xcec53d43
+	.long 0x9d8a7a87, 0x3b14f50f, 0x7629ea1e, 0xec53d43c
+	.long 0xd8a7a879, 0xb14f50f3, 0x629ea1e7, 0xc53d43ce
+	.long 0x8a7a879d, 0x14f50f3b, 0x29ea1e76, 0x53d43cec
+	.long 0xa7a879d8, 0x4f50f3b1, 0x9ea1e762, 0x3d43cec5
diff --git linux-libre-6.1-gnu/arch/arm64/crypto/sm3-neon-glue.c linux-libre-6.1.56-gnu/arch/arm64/crypto/sm3-neon-glue.c
new file mode 100644
index 000000000000..7182ee683f14
--- /dev/null
+++ linux-libre-6.1.56-gnu/arch/arm64/crypto/sm3-neon-glue.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sm3-neon-glue.c - SM3 secure hash using NEON instructions
+ *
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sm3.h>
+#include <crypto/sm3_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+
+asmlinkage void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
+				   int blocks);
+
+static int sm3_neon_update(struct shash_desc *desc, const u8 *data,
+			   unsigned int len)
+{
+	if (!crypto_simd_usable()) {
+		sm3_update(shash_desc_ctx(desc), data, len);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm3_neon_final(struct shash_desc *desc, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		sm3_final(shash_desc_ctx(desc), out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_finalize(desc, sm3_neon_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static int sm3_neon_finup(struct shash_desc *desc, const u8 *data,
+			  unsigned int len, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		struct sm3_state *sctx = shash_desc_ctx(desc);
+
+		if (len)
+			sm3_update(sctx, data, len);
+		sm3_final(sctx, out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	if (len)
+		sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	sm3_base_do_finalize(desc, sm3_neon_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static struct shash_alg sm3_alg = {
+	.digestsize		= SM3_DIGEST_SIZE,
+	.init			= sm3_base_init,
+	.update			= sm3_neon_update,
+	.final			= sm3_neon_final,
+	.finup			= sm3_neon_finup,
+	.descsize		= sizeof(struct sm3_state),
+	.base.cra_name		= "sm3",
+	.base.cra_driver_name	= "sm3-neon",
+	.base.cra_blocksize	= SM3_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+};
+
+static int __init sm3_neon_init(void)
+{
+	return crypto_register_shash(&sm3_alg);
+}
+
+static void __exit sm3_neon_fini(void)
+{
+	crypto_unregister_shash(&sm3_alg);
+}
+
+module_init(sm3_neon_init);
+module_exit(sm3_neon_fini);
+
+MODULE_DESCRIPTION("SM3 secure hash using NEON instructions");
+MODULE_AUTHOR("Jussi Kivilinna <jussi.kivilinna@iki.fi>");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_ll_sc.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/atomic_ll_sc.h
index 0890e4f568fb..cbb3d961123b 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_ll_sc.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/atomic_ll_sc.h
@@ -315,7 +315,7 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	"	cbnz	%w0, 1b\n"					\
 	"	" #mb "\n"						\
 	"2:"								\
-	: "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr)	\
+	: "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr)		\
 	: "r" (old1), "r" (old2), "r" (new1), "r" (new2)		\
 	: cl);								\
 									\
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_lse.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/atomic_lse.h
index 52075e93de6c..a94d6dacc029 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/atomic_lse.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/atomic_lse.h
@@ -311,7 +311,7 @@ __lse__cmpxchg_double##name(unsigned long old1,				\
 	"	eor	%[old2], %[old2], %[oldval2]\n"			\
 	"	orr	%[old1], %[old1], %[old2]"			\
 	: [old1] "+&r" (x0), [old2] "+&r" (x1),				\
-	  [v] "+Q" (*(unsigned long *)ptr)				\
+	  [v] "+Q" (*(__uint128_t *)ptr)				\
 	: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4),		\
 	  [oldval1] "r" (oldval1), [oldval2] "r" (oldval2)		\
 	: cl);								\
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/debug-monitors.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/debug-monitors.h
index 7b7e05c02691..13d437bcbf58 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/debug-monitors.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/debug-monitors.h
@@ -104,6 +104,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs,
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);
 int kernel_active_single_step(void);
+void kernel_rewind_single_step(struct pt_regs *regs);
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 int reinstall_suspended_bps(struct pt_regs *regs);
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/efi.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/efi.h
index 439e2bc5d5d8..62c846be2d76 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/efi.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/efi.h
@@ -14,8 +14,16 @@
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg);
 #else
 #define efi_init()
+
+static inline
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	return false;
+}
 #endif
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
@@ -25,6 +33,7 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 ({									\
 	efi_virtmap_load();						\
 	__efi_fpsimd_begin();						\
+	raw_spin_lock(&efi_rt_lock);					\
 })
 
 #undef arch_efi_call_virt
@@ -33,12 +42,23 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 
 #define arch_efi_call_virt_teardown()					\
 ({									\
+	raw_spin_unlock(&efi_rt_lock);					\
 	__efi_fpsimd_end();						\
 	efi_virtmap_unload();						\
 })
 
+extern raw_spinlock_t efi_rt_lock;
+extern u64 *efi_rt_stack_top;
 efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...);
 
+/*
+ * efi_rt_stack_top[-1] contains the value the stack pointer had before
+ * switching to the EFI runtime stack.
+ */
+#define current_in_efi()						\
+	(!preemptible() && efi_rt_stack_top != NULL &&			\
+	 on_task_stack(current, READ_ONCE(efi_rt_stack_top[-1]), 1))
+
 #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
 
 /*
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/fpsimd.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/fpsimd.h
index 6f86b7ab6c28..d720b6f7e5f9 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/fpsimd.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/fpsimd.h
@@ -339,7 +339,7 @@ static inline int sme_max_virtualisable_vl(void)
 	return vec_max_virtualisable_vl(ARM64_VEC_SME);
 }
 
-extern void sme_alloc(struct task_struct *task);
+extern void sme_alloc(struct task_struct *task, bool flush);
 extern unsigned int sme_get_vl(void);
 extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
@@ -365,7 +365,7 @@ static inline void sme_smstart_sm(void) { }
 static inline void sme_smstop_sm(void) { }
 static inline void sme_smstop(void) { }
 
-static inline void sme_alloc(struct task_struct *task) { }
+static inline void sme_alloc(struct task_struct *task, bool flush) { }
 static inline void sme_setup(void) { }
 static inline unsigned int sme_get_vl(void) { return 0; }
 static inline int sme_max_vl(void) { return 0; }
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/fpsimdmacros.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/fpsimdmacros.h
index 5e0910cf4832..696d247cf8fb 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/fpsimdmacros.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/fpsimdmacros.h
@@ -294,12 +294,12 @@
  _for n, 0, 15,	_sve_str_p	\n, \nxbase, \n - 16
 		cbz		\save_ffr, 921f
 		_sve_rdffr	0
-		_sve_str_p	0, \nxbase
-		_sve_ldr_p	0, \nxbase, -16
 		b		922f
 921:
-		str		xzr, [x\nxbase]		// Zero out FFR
+		_sve_pfalse	0			// Zero out FFR
 922:
+		_sve_str_p	0, \nxbase
+		_sve_ldr_p	0, \nxbase, -16
 		mrs		x\nxtmp, fpsr
 		str		w\nxtmp, [\xpfpsr]
 		mrs		x\nxtmp, fpcr
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/kvm_emulate.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/kvm_emulate.h
index 9bdba47f7e14..0d40c48d8132 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/kvm_emulate.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/kvm_emulate.h
@@ -373,8 +373,26 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
 
 static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 {
-	if (kvm_vcpu_abt_iss1tw(vcpu))
-		return true;
+	if (kvm_vcpu_abt_iss1tw(vcpu)) {
+		/*
+		 * Only a permission fault on a S1PTW should be
+		 * considered as a write. Otherwise, page tables baked
+		 * in a read-only memslot will result in an exception
+		 * being delivered in the guest.
+		 *
+		 * The drawback is that we end-up faulting twice if the
+		 * guest is using any of HW AF/DB: a translation fault
+		 * to map the page containing the PT (read only at
+		 * first), then a permission fault to allow the flags
+		 * to be set.
+		 */
+		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
+		case ESR_ELx_FSC_PERM:
+			return true;
+		default:
+			return false;
+		}
+	}
 
 	if (kvm_vcpu_trap_is_iabt(vcpu))
 		return false;
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/kvm_host.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/kvm_host.h
index 45e2136322ba..577cf444c113 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/kvm_host.h
@@ -127,6 +127,9 @@ struct kvm_arch {
 	/* Mandated version of PSCI */
 	u32 psci_version;
 
+	/* Protects VM-scoped configuration data */
+	struct mutex config_lock;
+
 	/*
 	 * If we encounter a data abort without valid instruction syndrome
 	 * information, report this to user space.  User space can (and
@@ -398,6 +401,7 @@ struct kvm_vcpu_arch {
 
 	/* vcpu power state */
 	struct kvm_mp_state mp_state;
+	spinlock_t mp_state_lock;
 
 	/* Cache some mmu pages needed inside spinlock regions */
 	struct kvm_mmu_memory_cache mmu_page_cache;
@@ -449,9 +453,22 @@ struct kvm_vcpu_arch {
 	({							\
 		__build_check_flag(v, flagset, f, m);		\
 								\
-		v->arch.flagset & (m);				\
+		READ_ONCE(v->arch.flagset) & (m);		\
 	})
 
+/*
+ * Note that the set/clear accessors must be preempt-safe in order to
+ * avoid nesting them with load/put which also manipulate flags...
+ */
+#ifdef __KVM_NVHE_HYPERVISOR__
+/* the nVHE hypervisor is always non-preemptible */
+#define __vcpu_flags_preempt_disable()
+#define __vcpu_flags_preempt_enable()
+#else
+#define __vcpu_flags_preempt_disable()	preempt_disable()
+#define __vcpu_flags_preempt_enable()	preempt_enable()
+#endif
+
 #define __vcpu_set_flag(v, flagset, f, m)			\
 	do {							\
 		typeof(v->arch.flagset) *fset;			\
@@ -459,9 +476,11 @@ struct kvm_vcpu_arch {
 		__build_check_flag(v, flagset, f, m);		\
 								\
 		fset = &v->arch.flagset;			\
+		__vcpu_flags_preempt_disable();			\
 		if (HWEIGHT(m) > 1)				\
 			*fset &= ~(m);				\
 		*fset |= (f);					\
+		__vcpu_flags_preempt_enable();			\
 	} while (0)
 
 #define __vcpu_clear_flag(v, flagset, f, m)			\
@@ -471,7 +490,9 @@ struct kvm_vcpu_arch {
 		__build_check_flag(v, flagset, f, m);		\
 								\
 		fset = &v->arch.flagset;			\
+		__vcpu_flags_preempt_disable();			\
 		*fset &= ~(m);					\
+		__vcpu_flags_preempt_enable();			\
 	} while (0)
 
 #define vcpu_get_flag(v, ...)	__vcpu_get_flag((v), __VA_ARGS__)
@@ -538,6 +559,8 @@ struct kvm_vcpu_arch {
 #define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(4))
 /* Software step state is Active-pending */
 #define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(5))
+/* WFI instruction trapped */
+#define IN_WFI			__vcpu_single_flag(sflags, BIT(7))
 
 
 /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/mte.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/mte.h
index 760c62f8e22f..3f8199ba265a 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/mte.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/mte.h
@@ -37,6 +37,29 @@ void mte_free_tag_storage(char *storage);
 /* track which pages have valid allocation tags */
 #define PG_mte_tagged	PG_arch_2
 
+static inline void set_page_mte_tagged(struct page *page)
+{
+	/*
+	 * Ensure that the tags written prior to this function are visible
+	 * before the page flags update.
+	 */
+	smp_wmb();
+	set_bit(PG_mte_tagged, &page->flags);
+}
+
+static inline bool page_mte_tagged(struct page *page)
+{
+	bool ret = test_bit(PG_mte_tagged, &page->flags);
+
+	/*
+	 * If the page is tagged, ensure ordering with a likely subsequent
+	 * read of the tags.
+	 */
+	if (ret)
+		smp_rmb();
+	return ret;
+}
+
 void mte_zero_clear_page_tags(void *addr);
 void mte_sync_tags(pte_t old_pte, pte_t pte);
 void mte_copy_page_tags(void *kto, const void *kfrom);
@@ -56,6 +79,13 @@ size_t mte_probe_user_range(const char __user *uaddr, size_t size);
 /* unused if !CONFIG_ARM64_MTE, silence the compiler */
 #define PG_mte_tagged	0
 
+static inline void set_page_mte_tagged(struct page *page)
+{
+}
+static inline bool page_mte_tagged(struct page *page)
+{
+	return false;
+}
 static inline void mte_zero_clear_page_tags(void *addr)
 {
 }
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/pgtable.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/pgtable.h
index edf6625ce965..5d0f1f7b7600 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/pgtable.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/pgtable.h
@@ -682,7 +682,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 #define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
 #define pud_valid(pud)		pte_valid(pud_pte(pud))
 #define pud_user(pud)		pte_user(pud_pte(pud))
-
+#define pud_user_exec(pud)	pte_user_exec(pud_pte(pud))
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
 {
@@ -863,12 +863,12 @@ static inline bool pte_user_accessible_page(pte_t pte)
 
 static inline bool pmd_user_accessible_page(pmd_t pmd)
 {
-	return pmd_leaf(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
+	return pmd_leaf(pmd) && !pmd_present_invalid(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
 }
 
 static inline bool pud_user_accessible_page(pud_t pud)
 {
-	return pud_leaf(pud) && pud_user(pud);
+	return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
 }
 #endif
 
@@ -1050,7 +1050,7 @@ static inline void arch_swap_invalidate_area(int type)
 static inline void arch_swap_restore(swp_entry_t entry, struct folio *folio)
 {
 	if (system_supports_mte() && mte_restore_tags(entry, &folio->page))
-		set_bit(PG_mte_tagged, &folio->flags);
+		set_page_mte_tagged(&folio->page);
 }
 
 #endif /* CONFIG_ARM64_MTE */
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/processor.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/processor.h
index 445aa3af3b76..400f8956328b 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/processor.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/processor.h
@@ -308,13 +308,13 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
 }
 #endif
 
-static inline bool is_ttbr0_addr(unsigned long addr)
+static __always_inline bool is_ttbr0_addr(unsigned long addr)
 {
 	/* entry assembly clears tags for TTBR0 addrs */
 	return addr < TASK_SIZE;
 }
 
-static inline bool is_ttbr1_addr(unsigned long addr)
+static __always_inline bool is_ttbr1_addr(unsigned long addr)
 {
 	/* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */
 	return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/scs.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/scs.h
index 8297bccf0784..5cd4d09bc69d 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/scs.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/scs.h
@@ -9,15 +9,16 @@
 #ifdef CONFIG_SHADOW_CALL_STACK
 	scs_sp	.req	x18
 
-	.macro scs_load tsk
-	ldr	scs_sp, [\tsk, #TSK_TI_SCS_SP]
+	.macro scs_load_current
+	get_current_task scs_sp
+	ldr	scs_sp, [scs_sp, #TSK_TI_SCS_SP]
 	.endm
 
 	.macro scs_save tsk
 	str	scs_sp, [\tsk, #TSK_TI_SCS_SP]
 	.endm
 #else
-	.macro scs_load tsk
+	.macro scs_load_current
 	.endm
 
 	.macro scs_save tsk
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/sdei.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/sdei.h
index 4292d9bafb9d..484cb6972e99 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/sdei.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/sdei.h
@@ -17,6 +17,9 @@
 
 #include <asm/virt.h>
 
+DECLARE_PER_CPU(struct sdei_registered_event *, sdei_active_normal_event);
+DECLARE_PER_CPU(struct sdei_registered_event *, sdei_active_critical_event);
+
 extern unsigned long sdei_exit_mode;
 
 /* Software Delegated Exception entry point from firmware*/
@@ -29,6 +32,9 @@ asmlinkage void __sdei_asm_entry_trampoline(unsigned long event_num,
 						   unsigned long pc,
 						   unsigned long pstate);
 
+/* Abort a running handler. Context is discarded. */
+void __sdei_handler_abort(void);
+
 /*
  * The above entry point does the minimum to call C code. This function does
  * anything else, before calling the driver.
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/stacktrace.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/stacktrace.h
index 5a0edb064ea4..327cdcfcb1db 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/stacktrace.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/stacktrace.h
@@ -104,4 +104,19 @@ static inline struct stack_info stackinfo_get_sdei_critical(void)
 #define stackinfo_get_sdei_critical()	stackinfo_get_unknown()
 #endif
 
+#ifdef CONFIG_EFI
+extern u64 *efi_rt_stack_top;
+
+static inline struct stack_info stackinfo_get_efi(void)
+{
+	unsigned long high = (u64)efi_rt_stack_top;
+	unsigned long low = high - THREAD_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+#endif
+
 #endif	/* __ASM_STACKTRACE_H */
diff --git linux-libre-6.1-gnu/arch/arm64/include/asm/sysreg.h linux-libre-6.1.56-gnu/arch/arm64/include/asm/sysreg.h
index 7d301700d1a9..3a448ab0924b 100644
--- linux-libre-6.1-gnu/arch/arm64/include/asm/sysreg.h
+++ linux-libre-6.1.56-gnu/arch/arm64/include/asm/sysreg.h
@@ -111,8 +111,14 @@
 #define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
 
 #define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
+#define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
 #define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CGSW			sys_insn(1, 0, 7, 10, 4)
+#define SYS_DC_CGDSW			sys_insn(1, 0, 7, 10, 6)
 #define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+#define SYS_DC_CIGSW			sys_insn(1, 0, 7, 14, 4)
+#define SYS_DC_CIGDSW			sys_insn(1, 0, 7, 14, 6)
 
 /*
  * Automatically generated definitions for system registers, the
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/compat_alignment.c linux-libre-6.1.56-gnu/arch/arm64/kernel/compat_alignment.c
index 5edec2f49ec9..deff21bfa680 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/compat_alignment.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/compat_alignment.c
@@ -314,36 +314,32 @@ int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs)
 	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
 	unsigned int type;
 	u32 instr = 0;
-	u16 tinstr = 0;
 	int isize = 4;
 	int thumb2_32b = 0;
-	int fault;
 
 	instrptr = instruction_pointer(regs);
 
 	if (compat_thumb_mode(regs)) {
 		__le16 __user *ptr = (__le16 __user *)(instrptr & ~1);
+		u16 tinstr, tinst2;
 
-		fault = alignment_get_thumb(regs, ptr, &tinstr);
-		if (!fault) {
-			if (IS_T32(tinstr)) {
-				/* Thumb-2 32-bit */
-				u16 tinst2;
-				fault = alignment_get_thumb(regs, ptr + 1, &tinst2);
-				instr = ((u32)tinstr << 16) | tinst2;
-				thumb2_32b = 1;
-			} else {
-				isize = 2;
-				instr = thumb2arm(tinstr);
-			}
+		if (alignment_get_thumb(regs, ptr, &tinstr))
+			return 1;
+
+		if (IS_T32(tinstr)) { /* Thumb-2 32-bit */
+			if (alignment_get_thumb(regs, ptr + 1, &tinst2))
+				return 1;
+			instr = ((u32)tinstr << 16) | tinst2;
+			thumb2_32b = 1;
+		} else {
+			isize = 2;
+			instr = thumb2arm(tinstr);
 		}
 	} else {
-		fault = alignment_get_arm(regs, (__le32 __user *)instrptr, &instr);
+		if (alignment_get_arm(regs, (__le32 __user *)instrptr, &instr))
+			return 1;
 	}
 
-	if (fault)
-		return 1;
-
 	switch (CODING_BITS(instr)) {
 	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
 		if (LDSTHD_I_BIT(instr))
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/cpu_errata.c linux-libre-6.1.56-gnu/arch/arm64/kernel/cpu_errata.c
index 89ac00084f38..8dbf3c21ea22 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/cpu_errata.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/cpu_errata.c
@@ -722,6 +722,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)),
 		.cpu_enable = cpu_clear_bf16_from_user_emulation,
 	},
+#endif
+#ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_38
+	{
+		.desc = "AmpereOne erratum AC03_CPU_38",
+		.capability = ARM64_WORKAROUND_AMPERE_AC03_CPU_38,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+	},
 #endif
 	{
 	}
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/cpufeature.c linux-libre-6.1.56-gnu/arch/arm64/kernel/cpufeature.c
index b3f37e2209ad..b3eb53847c96 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/cpufeature.c
@@ -2074,8 +2074,10 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 	 * Clear the tags in the zero page. This needs to be done via the
 	 * linear map which has the Tagged attribute.
 	 */
-	if (!test_and_set_bit(PG_mte_tagged, &ZERO_PAGE(0)->flags))
+	if (!page_mte_tagged(ZERO_PAGE(0))) {
 		mte_clear_page_tags(lm_alias(empty_zero_page));
+		set_page_mte_tagged(ZERO_PAGE(0));
+	}
 
 	kasan_init_hw_tags_cpu();
 }
@@ -2756,7 +2758,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP),
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
 	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_EL1_DIT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
 	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
 	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
 	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/debug-monitors.c linux-libre-6.1.56-gnu/arch/arm64/kernel/debug-monitors.c
index 3da09778267e..64f2ecbdfe5c 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/debug-monitors.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/debug-monitors.c
@@ -438,6 +438,11 @@ int kernel_active_single_step(void)
 }
 NOKPROBE_SYMBOL(kernel_active_single_step);
 
+void kernel_rewind_single_step(struct pt_regs *regs)
+{
+	set_regs_spsr_ss(regs);
+}
+
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/efi-header.S linux-libre-6.1.56-gnu/arch/arm64/kernel/efi-header.S
index 28d8a5dca5f1..d731b4655df8 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/efi-header.S
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/efi-header.S
@@ -66,7 +66,7 @@
 	.long	.Lefi_header_end - .L_head		// SizeOfHeaders
 	.long	0					// CheckSum
 	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
-	.short	0					// DllCharacteristics
+	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
 	.quad	0					// SizeOfStackReserve
 	.quad	0					// SizeOfStackCommit
 	.quad	0					// SizeOfHeapReserve
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/efi-rt-wrapper.S linux-libre-6.1.56-gnu/arch/arm64/kernel/efi-rt-wrapper.S
index 75691a2641c1..e8ae803662cf 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/efi-rt-wrapper.S
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/efi-rt-wrapper.S
@@ -4,9 +4,10 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 SYM_FUNC_START(__efi_rt_asm_wrapper)
-	stp	x29, x30, [sp, #-32]!
+	stp	x29, x30, [sp, #-112]!
 	mov	x29, sp
 
 	/*
@@ -16,6 +17,22 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	 */
 	stp	x1, x18, [sp, #16]
 
+	/*
+	 * Preserve all callee saved registers and preserve the stack pointer
+	 * value at the base of the EFI runtime stack so we can recover from
+	 * synchronous exceptions occurring while executing the firmware
+	 * routines.
+	 */
+	stp	x19, x20, [sp, #32]
+	stp	x21, x22, [sp, #48]
+	stp	x23, x24, [sp, #64]
+	stp	x25, x26, [sp, #80]
+	stp	x27, x28, [sp, #96]
+
+	ldr_l	x16, efi_rt_stack_top
+	mov	sp, x16
+	stp	x18, x29, [sp, #-16]!
+
 	/*
 	 * We are lucky enough that no EFI runtime services take more than
 	 * 5 arguments, so all are passed in registers rather than via the
@@ -29,9 +46,13 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	mov	x4, x6
 	blr	x8
 
+	mov	x16, sp
+	mov	sp, x29
+	str	xzr, [x16, #8]			// clear recorded task SP value
+
 	ldp	x1, x2, [sp, #16]
 	cmp	x2, x18
-	ldp	x29, x30, [sp], #32
+	ldp	x29, x30, [sp], #112
 	b.ne	0f
 	ret
 0:
@@ -42,6 +63,25 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	 * called with preemption disabled and a separate shadow stack is used
 	 * for interrupts.
 	 */
-	mov	x18, x2
+#ifdef CONFIG_SHADOW_CALL_STACK
+	ldr_l	x18, efi_rt_stack_top
+	ldr	x18, [x18, #-16]
+#endif
+
 	b	efi_handle_corrupted_x18	// tail call
 SYM_FUNC_END(__efi_rt_asm_wrapper)
+
+SYM_CODE_START(__efi_rt_asm_recover)
+	mov	sp, x30
+
+	ldr_l	x16, efi_rt_stack_top		// clear recorded task SP value
+	str	xzr, [x16, #-8]
+
+	ldp	x19, x20, [sp, #32]
+	ldp	x21, x22, [sp, #48]
+	ldp	x23, x24, [sp, #64]
+	ldp	x25, x26, [sp, #80]
+	ldp	x27, x28, [sp, #96]
+	ldp	x29, x30, [sp], #112
+	ret
+SYM_CODE_END(__efi_rt_asm_recover)
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/efi.c linux-libre-6.1.56-gnu/arch/arm64/kernel/efi.c
index a908a37f0367..a30dbe4b95cd 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/efi.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/efi.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 
 #include <asm/efi.h>
+#include <asm/stacktrace.h>
 
 static bool region_is_misaligned(const efi_memory_desc_t *md)
 {
@@ -144,3 +145,52 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
 	pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
 	return s;
 }
+
+DEFINE_RAW_SPINLOCK(efi_rt_lock);
+
+asmlinkage u64 *efi_rt_stack_top __ro_after_init;
+
+asmlinkage efi_status_t __efi_rt_asm_recover(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	 /* Check whether the exception occurred while running the firmware */
+	if (!current_in_efi() || regs->pc >= TASK_SIZE_64)
+		return false;
+
+	pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
+	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+
+	regs->regs[0]	= EFI_ABORTED;
+	regs->regs[30]	= efi_rt_stack_top[-1];
+	regs->pc	= (u64)__efi_rt_asm_recover;
+
+	if (IS_ENABLED(CONFIG_SHADOW_CALL_STACK))
+		regs->regs[18] = efi_rt_stack_top[-2];
+
+	return true;
+}
+
+/* EFI requires 8 KiB of stack space for runtime services */
+static_assert(THREAD_SIZE >= SZ_8K);
+
+static int __init arm64_efi_rt_init(void)
+{
+	void *p;
+
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
+	p = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, GFP_KERNEL,
+			   NUMA_NO_NODE, &&l);
+l:	if (!p) {
+		pr_warn("Failed to allocate EFI runtime stack\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return -ENOMEM;
+	}
+
+	efi_rt_stack_top = p + THREAD_SIZE;
+	return 0;
+}
+core_initcall(arm64_efi_rt_init);
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/elfcore.c linux-libre-6.1.56-gnu/arch/arm64/kernel/elfcore.c
index 27ef7ad3ffd2..2e94d20c4ac7 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/elfcore.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/elfcore.c
@@ -8,28 +8,27 @@
 #include <asm/cpufeature.h>
 #include <asm/mte.h>
 
-#define for_each_mte_vma(vmi, vma)					\
+#define for_each_mte_vma(cprm, i, m)					\
 	if (system_supports_mte())					\
-		for_each_vma(vmi, vma)					\
-			if (vma->vm_flags & VM_MTE)
+		for (i = 0, m = cprm->vma_meta;				\
+		     i < cprm->vma_count;				\
+		     i++, m = cprm->vma_meta + i)			\
+			if (m->flags & VM_MTE)
 
-static unsigned long mte_vma_tag_dump_size(struct vm_area_struct *vma)
+static unsigned long mte_vma_tag_dump_size(struct core_vma_metadata *m)
 {
-	if (vma->vm_flags & VM_DONTDUMP)
-		return 0;
-
-	return vma_pages(vma) * MTE_PAGE_TAG_STORAGE;
+	return (m->dump_size >> PAGE_SHIFT) * MTE_PAGE_TAG_STORAGE;
 }
 
 /* Derived from dump_user_range(); start/end must be page-aligned */
 static int mte_dump_tag_range(struct coredump_params *cprm,
-			      unsigned long start, unsigned long end)
+			      unsigned long start, unsigned long len)
 {
 	int ret = 1;
 	unsigned long addr;
 	void *tags = NULL;
 
-	for (addr = start; addr < end; addr += PAGE_SIZE) {
+	for (addr = start; addr < start + len; addr += PAGE_SIZE) {
 		struct page *page = get_dump_page(addr);
 
 		/*
@@ -47,7 +46,7 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 		 * Pages mapped in user space as !pte_access_permitted() (e.g.
 		 * PROT_EXEC only) may not have the PG_mte_tagged flag set.
 		 */
-		if (!test_bit(PG_mte_tagged, &page->flags)) {
+		if (!page_mte_tagged(page)) {
 			put_page(page);
 			dump_skip(cprm, MTE_PAGE_TAG_STORAGE);
 			continue;
@@ -65,7 +64,6 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 		mte_save_page_tags(page_address(page), tags);
 		put_page(page);
 		if (!dump_emit(cprm, tags, MTE_PAGE_TAG_STORAGE)) {
-			mte_free_tag_storage(tags);
 			ret = 0;
 			break;
 		}
@@ -77,13 +75,13 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 	return ret;
 }
 
-Elf_Half elf_core_extra_phdrs(void)
+Elf_Half elf_core_extra_phdrs(struct coredump_params *cprm)
 {
-	struct vm_area_struct *vma;
+	int i;
+	struct core_vma_metadata *m;
 	int vma_count = 0;
-	VMA_ITERATOR(vmi, current->mm, 0);
 
-	for_each_mte_vma(vmi, vma)
+	for_each_mte_vma(cprm, i, m)
 		vma_count++;
 
 	return vma_count;
@@ -91,18 +89,18 @@ Elf_Half elf_core_extra_phdrs(void)
 
 int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
 {
-	struct vm_area_struct *vma;
-	VMA_ITERATOR(vmi, current->mm, 0);
+	int i;
+	struct core_vma_metadata *m;
 
-	for_each_mte_vma(vmi, vma) {
+	for_each_mte_vma(cprm, i, m) {
 		struct elf_phdr phdr;
 
 		phdr.p_type = PT_AARCH64_MEMTAG_MTE;
 		phdr.p_offset = offset;
-		phdr.p_vaddr = vma->vm_start;
+		phdr.p_vaddr = m->start;
 		phdr.p_paddr = 0;
-		phdr.p_filesz = mte_vma_tag_dump_size(vma);
-		phdr.p_memsz = vma->vm_end - vma->vm_start;
+		phdr.p_filesz = mte_vma_tag_dump_size(m);
+		phdr.p_memsz = m->end - m->start;
 		offset += phdr.p_filesz;
 		phdr.p_flags = 0;
 		phdr.p_align = 0;
@@ -114,28 +112,25 @@ int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
 	return 1;
 }
 
-size_t elf_core_extra_data_size(void)
+size_t elf_core_extra_data_size(struct coredump_params *cprm)
 {
-	struct vm_area_struct *vma;
+	int i;
+	struct core_vma_metadata *m;
 	size_t data_size = 0;
-	VMA_ITERATOR(vmi, current->mm, 0);
 
-	for_each_mte_vma(vmi, vma)
-		data_size += mte_vma_tag_dump_size(vma);
+	for_each_mte_vma(cprm, i, m)
+		data_size += mte_vma_tag_dump_size(m);
 
 	return data_size;
 }
 
 int elf_core_write_extra_data(struct coredump_params *cprm)
 {
-	struct vm_area_struct *vma;
-	VMA_ITERATOR(vmi, current->mm, 0);
-
-	for_each_mte_vma(vmi, vma) {
-		if (vma->vm_flags & VM_DONTDUMP)
-			continue;
+	int i;
+	struct core_vma_metadata *m;
 
-		if (!mte_dump_tag_range(cprm, vma->vm_start, vma->vm_end))
+	for_each_mte_vma(cprm, i, m) {
+		if (!mte_dump_tag_range(cprm, m->start, m->dump_size))
 			return 0;
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/entry.S linux-libre-6.1.56-gnu/arch/arm64/kernel/entry.S
index e28137d64b76..beb4db21c89c 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/entry.S
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/entry.S
@@ -272,7 +272,7 @@ alternative_if ARM64_HAS_ADDRESS_AUTH
 alternative_else_nop_endif
 1:
 
-	scs_load tsk
+	scs_load_current
 	.else
 	add	x21, sp, #PT_REGS_SIZE
 	get_current_task tsk
@@ -845,7 +845,7 @@ SYM_FUNC_START(cpu_switch_to)
 	msr	sp_el0, x1
 	ptrauth_keys_install_kernel x1, x8, x9, x10
 	scs_save x0
-	scs_load x1
+	scs_load_current
 	ret
 SYM_FUNC_END(cpu_switch_to)
 NOKPROBE(cpu_switch_to)
@@ -873,19 +873,19 @@ NOKPROBE(ret_from_fork)
  */
 SYM_FUNC_START(call_on_irq_stack)
 #ifdef CONFIG_SHADOW_CALL_STACK
-	stp	scs_sp, xzr, [sp, #-16]!
+	get_current_task x16
+	scs_save x16
 	ldr_this_cpu scs_sp, irq_shadow_call_stack_ptr, x17
 #endif
+
 	/* Create a frame record to save our LR and SP (implicit in FP) */
 	stp	x29, x30, [sp, #-16]!
 	mov	x29, sp
 
 	ldr_this_cpu x16, irq_stack_ptr, x17
-	mov	x15, #IRQ_STACK_SIZE
-	add	x16, x16, x15
 
 	/* Move to the new stack and call the function there */
-	mov	sp, x16
+	add	sp, x16, #IRQ_STACK_SIZE
 	blr	x1
 
 	/*
@@ -894,9 +894,7 @@ SYM_FUNC_START(call_on_irq_stack)
 	 */
 	mov	sp, x29
 	ldp	x29, x30, [sp], #16
-#ifdef CONFIG_SHADOW_CALL_STACK
-	ldp	scs_sp, xzr, [sp], #16
-#endif
+	scs_load_current
 	ret
 SYM_FUNC_END(call_on_irq_stack)
 NOKPROBE(call_on_irq_stack)
@@ -995,9 +993,13 @@ SYM_CODE_START(__sdei_asm_handler)
 
 	mov	x19, x1
 
-#if defined(CONFIG_VMAP_STACK) || defined(CONFIG_SHADOW_CALL_STACK)
+	/* Store the registered-event for crash_smp_send_stop() */
 	ldrb	w4, [x19, #SDEI_EVENT_PRIORITY]
-#endif
+	cbnz	w4, 1f
+	adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6
+	b	2f
+1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
+2:	str	x19, [x5]
 
 #ifdef CONFIG_VMAP_STACK
 	/*
@@ -1064,6 +1066,14 @@ SYM_CODE_START(__sdei_asm_handler)
 
 	ldr_l	x2, sdei_exit_mode
 
+	/* Clear the registered-event seen by crash_smp_send_stop() */
+	ldrb	w3, [x4, #SDEI_EVENT_PRIORITY]
+	cbnz	w3, 1f
+	adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6
+	b	2f
+1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
+2:	str	xzr, [x5]
+
 alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
 	sdei_handler_exit exit_mode=x2
 alternative_else_nop_endif
@@ -1074,4 +1084,15 @@ alternative_else_nop_endif
 #endif
 SYM_CODE_END(__sdei_asm_handler)
 NOKPROBE(__sdei_asm_handler)
+
+SYM_CODE_START(__sdei_handler_abort)
+	mov_q	x0, SDEI_1_0_FN_SDEI_EVENT_COMPLETE_AND_RESUME
+	adr	x1, 1f
+	ldr_l	x2, sdei_exit_mode
+	sdei_handler_exit exit_mode=x2
+	// exit the handler and jump to the next instruction.
+	// Exit will stomp x0-x17, PSTATE, ELR_ELx, and SPSR_ELx.
+1:	ret
+SYM_CODE_END(__sdei_handler_abort)
+NOKPROBE(__sdei_handler_abort)
 #endif /* CONFIG_ARM_SDE_INTERFACE */
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/fpsimd.c linux-libre-6.1.56-gnu/arch/arm64/kernel/fpsimd.c
index 23834d96d1e7..8c226d79abdf 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/fpsimd.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/fpsimd.c
@@ -634,7 +634,7 @@ static void fpsimd_to_sve(struct task_struct *task)
 	void *sst = task->thread.sve_state;
 	struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
 
-	if (!system_supports_sve())
+	if (!system_supports_sve() && !system_supports_sme())
 		return;
 
 	vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread));
@@ -660,7 +660,7 @@ static void sve_to_fpsimd(struct task_struct *task)
 	unsigned int i;
 	__uint128_t const *p;
 
-	if (!system_supports_sve())
+	if (!system_supports_sve() && !system_supports_sme())
 		return;
 
 	vl = thread_get_cur_vl(&task->thread);
@@ -791,7 +791,8 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
 	void *sst = task->thread.sve_state;
 	struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
 
-	if (!test_tsk_thread_flag(task, TIF_SVE))
+	if (!test_tsk_thread_flag(task, TIF_SVE) &&
+	    !thread_sm_enabled(&task->thread))
 		return;
 
 	vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread));
@@ -803,6 +804,8 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
 int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 			  unsigned long vl, unsigned long flags)
 {
+	bool free_sme = false;
+
 	if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
 				     PR_SVE_SET_VL_ONEXEC))
 		return -EINVAL;
@@ -851,24 +854,39 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	    thread_sm_enabled(&task->thread))
 		sve_to_fpsimd(task);
 
-	if (system_supports_sme() && type == ARM64_VEC_SME) {
-		task->thread.svcr &= ~(SVCR_SM_MASK |
-				       SVCR_ZA_MASK);
-		clear_thread_flag(TIF_SME);
+	if (system_supports_sme()) {
+		if (type == ARM64_VEC_SME ||
+		    !(task->thread.svcr & (SVCR_SM_MASK | SVCR_ZA_MASK))) {
+			/*
+			 * We are changing the SME VL or weren't using
+			 * SME anyway, discard the state and force a
+			 * reallocation.
+			 */
+			task->thread.svcr &= ~(SVCR_SM_MASK |
+					       SVCR_ZA_MASK);
+			clear_tsk_thread_flag(task, TIF_SME);
+			free_sme = true;
+		}
 	}
 
 	if (task == current)
 		put_cpu_fpsimd_context();
 
+	task_set_vl(task, type, vl);
+
 	/*
-	 * Force reallocation of task SVE and SME state to the correct
-	 * size on next use:
+	 * Free the changed states if they are not in use, SME will be
+	 * reallocated to the correct size on next use and we just
+	 * allocate SVE now in case it is needed for use in streaming
+	 * mode.
 	 */
-	sve_free(task);
-	if (system_supports_sme() && type == ARM64_VEC_SME)
-		sme_free(task);
+	if (system_supports_sve()) {
+		sve_free(task);
+		sve_alloc(task, true);
+	}
 
-	task_set_vl(task, type, vl);
+	if (free_sme)
+		sme_free(task);
 
 out:
 	update_tsk_thread_flag(task, vec_vl_inherit_flag(type),
@@ -1115,9 +1133,6 @@ void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
  */
 u64 read_zcr_features(void)
 {
-	u64 zcr;
-	unsigned int vq_max;
-
 	/*
 	 * Set the maximum possible VL, and write zeroes to all other
 	 * bits to see if they stick.
@@ -1125,12 +1140,8 @@ u64 read_zcr_features(void)
 	sve_kernel_enable(NULL);
 	write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
 
-	zcr = read_sysreg_s(SYS_ZCR_EL1);
-	zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */
-	vq_max = sve_vq_from_vl(sve_get_vl());
-	zcr |= vq_max - 1; /* set LEN field to maximum effective value */
-
-	return zcr;
+	/* Return LEN value that would be written to get the maximum VL */
+	return sve_vq_from_vl(sve_get_vl()) - 1;
 }
 
 void __init sve_setup(void)
@@ -1221,9 +1232,9 @@ void fpsimd_release_task(struct task_struct *dead_task)
  * the interest of testability and predictability, the architecture
  * guarantees that when ZA is enabled it will be zeroed.
  */
-void sme_alloc(struct task_struct *task)
+void sme_alloc(struct task_struct *task, bool flush)
 {
-	if (task->thread.za_state) {
+	if (task->thread.za_state && flush) {
 		memset(task->thread.za_state, 0, za_state_size(task));
 		return;
 	}
@@ -1274,11 +1285,7 @@ void fa64_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
  */
 u64 read_smcr_features(void)
 {
-	u64 smcr;
-	unsigned int vq_max;
-
 	sme_kernel_enable(NULL);
-	sme_smstart_sm();
 
 	/*
 	 * Set the maximum possible VL.
@@ -1286,14 +1293,8 @@ u64 read_smcr_features(void)
 	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_LEN_MASK,
 		       SYS_SMCR_EL1);
 
-	smcr = read_sysreg_s(SYS_SMCR_EL1);
-	smcr &= ~(u64)SMCR_ELx_LEN_MASK; /* Only the LEN field */
-	vq_max = sve_vq_from_vl(sve_get_vl());
-	smcr |= vq_max - 1; /* set LEN field to maximum effective value */
-
-	sme_smstop_sm();
-
-	return smcr;
+	/* Return LEN value that would be written to get the maximum VL */
+	return sve_vq_from_vl(sme_get_vl()) - 1;
 }
 
 void __init sme_setup(void)
@@ -1442,7 +1443,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 	}
 
 	sve_alloc(current, false);
-	sme_alloc(current);
+	sme_alloc(current, true);
 	if (!current->thread.sve_state || !current->thread.za_state) {
 		force_sig(SIGKILL);
 		return;
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/head.S linux-libre-6.1.56-gnu/arch/arm64/kernel/head.S
index 2196aad7b55b..cdbbc95eb49d 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/head.S
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/head.S
@@ -404,7 +404,7 @@ SYM_FUNC_END(create_kernel_mapping)
 	stp	xzr, xzr, [sp, #S_STACKFRAME]
 	add	x29, sp, #S_STACKFRAME
 
-	scs_load \tsk
+	scs_load_current
 
 	adr_l	\tmp1, __per_cpu_offset
 	ldr	w\tmp2, [\tsk, #TSK_TI_CPU]
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/hibernate.c linux-libre-6.1.56-gnu/arch/arm64/kernel/hibernate.c
index af5df48ba915..788597a6b6a2 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/hibernate.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/hibernate.c
@@ -271,7 +271,7 @@ static int swsusp_mte_save_tags(void)
 			if (!page)
 				continue;
 
-			if (!test_bit(PG_mte_tagged, &page->flags))
+			if (!page_mte_tagged(page))
 				continue;
 
 			ret = save_tags(page, pfn);
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/hw_breakpoint.c linux-libre-6.1.56-gnu/arch/arm64/kernel/hw_breakpoint.c
index b29a311bb055..9659a9555c63 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/hw_breakpoint.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/hw_breakpoint.c
@@ -654,7 +654,7 @@ static int breakpoint_handler(unsigned long unused, unsigned long esr,
 		perf_bp_event(bp, regs);
 
 		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(bp))
+		if (uses_default_overflow_handler(bp))
 			step = 1;
 unlock:
 		rcu_read_unlock();
@@ -733,7 +733,7 @@ static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
 static int watchpoint_report(struct perf_event *wp, unsigned long addr,
 			     struct pt_regs *regs)
 {
-	int step = is_default_overflow_handler(wp);
+	int step = uses_default_overflow_handler(wp);
 	struct arch_hw_breakpoint *info = counter_arch_bp(wp);
 
 	info->trigger = addr;
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/kgdb.c linux-libre-6.1.56-gnu/arch/arm64/kernel/kgdb.c
index cda9c1e9864f..4e1f983df3d1 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/kgdb.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/kgdb.c
@@ -224,6 +224,8 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 		 */
 		if (!kernel_active_single_step())
 			kernel_enable_single_step(linux_regs);
+		else
+			kernel_rewind_single_step(linux_regs);
 		err = 0;
 		break;
 	default:
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/module-plts.c linux-libre-6.1.56-gnu/arch/arm64/kernel/module-plts.c
index 5a0a8f552a61..c703b5db8eb1 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/module-plts.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/module-plts.c
@@ -7,6 +7,7 @@
 #include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/moduleloader.h>
 #include <linux/sort.h>
 
 static struct plt_entry __get_adrp_add_pair(u64 dst, u64 pc,
@@ -343,7 +344,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		if (nents)
 			sort(rels, nents, sizeof(Elf64_Rela), cmp_rela, NULL);
 
-		if (!str_has_prefix(secstrings + dstsec->sh_name, ".init"))
+		if (!module_init_layout_section(secstrings + dstsec->sh_name))
 			core_plts += count_plts(syms, rels, numrels,
 						sechdrs[i].sh_info, dstsec);
 		else
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/mte.c linux-libre-6.1.56-gnu/arch/arm64/kernel/mte.c
index 7467217c1eaf..e20af03b4cdf 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/mte.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/mte.c
@@ -41,8 +41,10 @@ static void mte_sync_page_tags(struct page *page, pte_t old_pte,
 	if (check_swap && is_swap_pte(old_pte)) {
 		swp_entry_t entry = pte_to_swp_entry(old_pte);
 
-		if (!non_swap_entry(entry) && mte_restore_tags(entry, page))
+		if (!non_swap_entry(entry) && mte_restore_tags(entry, page)) {
+			set_page_mte_tagged(page);
 			return;
+		}
 	}
 
 	if (!pte_is_tagged)
@@ -52,8 +54,10 @@ static void mte_sync_page_tags(struct page *page, pte_t old_pte,
 	 * Test PG_mte_tagged again in case it was racing with another
 	 * set_pte_at().
 	 */
-	if (!test_and_set_bit(PG_mte_tagged, &page->flags))
+	if (!page_mte_tagged(page)) {
 		mte_clear_page_tags(page_address(page));
+		set_page_mte_tagged(page);
+	}
 }
 
 void mte_sync_tags(pte_t old_pte, pte_t pte)
@@ -68,11 +72,10 @@ void mte_sync_tags(pte_t old_pte, pte_t pte)
 		return;
 
 	/* if PG_mte_tagged is set, tags have already been initialised */
-	for (i = 0; i < nr_pages; i++, page++) {
-		if (!test_bit(PG_mte_tagged, &page->flags))
+	for (i = 0; i < nr_pages; i++, page++)
+		if (!page_mte_tagged(page))
 			mte_sync_page_tags(page, old_pte, check_swap,
 					   pte_is_tagged);
-	}
 
 	/* ensure the tags are visible before the PTE is set */
 	smp_wmb();
@@ -96,8 +99,7 @@ int memcmp_pages(struct page *page1, struct page *page2)
 	 * pages is tagged, set_pte_at() may zero or change the tags of the
 	 * other page via mte_sync_tags().
 	 */
-	if (test_bit(PG_mte_tagged, &page1->flags) ||
-	    test_bit(PG_mte_tagged, &page2->flags))
+	if (page_mte_tagged(page1) || page_mte_tagged(page2))
 		return addr1 != addr2;
 
 	return ret;
@@ -454,7 +456,7 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
 			put_page(page);
 			break;
 		}
-		WARN_ON_ONCE(!test_bit(PG_mte_tagged, &page->flags));
+		WARN_ON_ONCE(!page_mte_tagged(page));
 
 		/* limit access to the end of the page */
 		offset = offset_in_page(addr);
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/ptrace.c linux-libre-6.1.56-gnu/arch/arm64/kernel/ptrace.c
index c2fb5755bbec..e1f6366b7ccd 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/ptrace.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/ptrace.c
@@ -886,10 +886,18 @@ static int sve_set_common(struct task_struct *target,
 			break;
 		case ARM64_VEC_SME:
 			target->thread.svcr |= SVCR_SM_MASK;
+
+			/*
+			 * Disable traps and ensure there is SME storage but
+			 * preserve any currently set values in ZA/ZT.
+			 */
+			sme_alloc(target, false);
+			set_tsk_thread_flag(target, TIF_SME);
 			break;
 		default:
 			WARN_ON_ONCE(1);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out;
 		}
 
 		/*
@@ -937,11 +945,13 @@ static int sve_set_common(struct task_struct *target,
 	/*
 	 * Ensure target->thread.sve_state is up to date with target's
 	 * FPSIMD regs, so that a short copyin leaves trailing
-	 * registers unmodified.  Always enable SVE even if going into
-	 * streaming mode.
+	 * registers unmodified.  Only enable SVE if we are
+	 * configuring normal SVE, a system with streaming SVE may not
+	 * have normal SVE.
 	 */
 	fpsimd_sync_to_sve(target);
-	set_tsk_thread_flag(target, TIF_SVE);
+	if (type == ARM64_VEC_SVE)
+		set_tsk_thread_flag(target, TIF_SVE);
 
 	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
 	start = SVE_PT_SVE_OFFSET;
@@ -1105,7 +1115,7 @@ static int za_set(struct task_struct *target,
 	}
 
 	/* Allocate/reinit ZA storage */
-	sme_alloc(target);
+	sme_alloc(target, true);
 	if (!target->thread.za_state) {
 		ret = -ENOMEM;
 		goto out;
@@ -1364,7 +1374,7 @@ enum aarch64_regset {
 #ifdef CONFIG_ARM64_SVE
 	REGSET_SVE,
 #endif
-#ifdef CONFIG_ARM64_SVE
+#ifdef CONFIG_ARM64_SME
 	REGSET_SSVE,
 	REGSET_ZA,
 #endif
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/sdei.c linux-libre-6.1.56-gnu/arch/arm64/kernel/sdei.c
index d56e170e1ca7..48c6457b67db 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/sdei.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/sdei.c
@@ -47,6 +47,9 @@ DEFINE_PER_CPU(unsigned long *, sdei_shadow_call_stack_normal_ptr);
 DEFINE_PER_CPU(unsigned long *, sdei_shadow_call_stack_critical_ptr);
 #endif
 
+DEFINE_PER_CPU(struct sdei_registered_event *, sdei_active_normal_event);
+DEFINE_PER_CPU(struct sdei_registered_event *, sdei_active_critical_event);
+
 static void _free_sdei_stack(unsigned long * __percpu *ptr, int cpu)
 {
 	unsigned long *p;
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/signal.c linux-libre-6.1.56-gnu/arch/arm64/kernel/signal.c
index 9ad911f1647c..82f4572c8ddf 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/signal.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/signal.c
@@ -280,7 +280,12 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 
 		vl = task_get_sme_vl(current);
 	} else {
-		if (!system_supports_sve())
+		/*
+		 * A SME only system use SVE for streaming mode so can
+		 * have a SVE formatted context with a zero VL and no
+		 * payload data.
+		 */
+		if (!system_supports_sve() && !system_supports_sme())
 			return -EINVAL;
 
 		vl = task_get_sve_vl(current);
@@ -425,7 +430,7 @@ static int restore_za_context(struct user_ctxs *user)
 	fpsimd_flush_task_state(current);
 	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
 
-	sme_alloc(current);
+	sme_alloc(current, true);
 	if (!current->thread.za_state) {
 		current->thread.svcr &= ~SVCR_ZA_MASK;
 		clear_thread_flag(TIF_SME);
@@ -729,7 +734,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 			return err;
 	}
 
-	if (system_supports_sve()) {
+	if (system_supports_sve() || system_supports_sme()) {
 		unsigned int vq = 0;
 
 		if (add_all || test_thread_flag(TIF_SVE) ||
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/smp.c linux-libre-6.1.56-gnu/arch/arm64/kernel/smp.c
index ffc5d76cf695..d323621d14a5 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/smp.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/smp.c
@@ -1047,10 +1047,8 @@ void crash_smp_send_stop(void)
 	 * If this cpu is the only one alive at this point in time, online or
 	 * not, there are no stop messages to be sent around, so just back out.
 	 */
-	if (num_other_online_cpus() == 0) {
-		sdei_mask_local_cpu();
-		return;
-	}
+	if (num_other_online_cpus() == 0)
+		goto skip_ipi;
 
 	cpumask_copy(&mask, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &mask);
@@ -1069,7 +1067,9 @@ void crash_smp_send_stop(void)
 		pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",
 			cpumask_pr_args(&mask));
 
+skip_ipi:
 	sdei_mask_local_cpu();
+	sdei_handler_abort();
 }
 
 bool smp_crash_stop_failed(void)
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/stacktrace.c linux-libre-6.1.56-gnu/arch/arm64/kernel/stacktrace.c
index 634279b3b03d..83154303e682 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/stacktrace.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/stacktrace.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 ARM Ltd.
  */
 #include <linux/kernel.h>
+#include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/ftrace.h>
 #include <linux/sched.h>
@@ -12,6 +13,7 @@
 #include <linux/sched/task_stack.h>
 #include <linux/stacktrace.h>
 
+#include <asm/efi.h>
 #include <asm/irq.h>
 #include <asm/stack_pointer.h>
 #include <asm/stacktrace.h>
@@ -23,8 +25,8 @@
  *
  * The regs must be on a stack currently owned by the calling task.
  */
-static inline void unwind_init_from_regs(struct unwind_state *state,
-					 struct pt_regs *regs)
+static __always_inline void unwind_init_from_regs(struct unwind_state *state,
+						  struct pt_regs *regs)
 {
 	unwind_init_common(state, current);
 
@@ -58,8 +60,8 @@ static __always_inline void unwind_init_from_caller(struct unwind_state *state)
  * duration of the unwind, or the unwind will be bogus. It is never valid to
  * call this for the current task.
  */
-static inline void unwind_init_from_task(struct unwind_state *state,
-					 struct task_struct *task)
+static __always_inline void unwind_init_from_task(struct unwind_state *state,
+						  struct task_struct *task)
 {
 	unwind_init_common(state, task);
 
@@ -186,7 +188,14 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 			: stackinfo_get_unknown();		\
 	})
 
-noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry,
+#define STACKINFO_EFI						\
+	({							\
+		((task == current) && current_in_efi())		\
+			? stackinfo_get_efi()			\
+			: stackinfo_get_unknown();		\
+	})
+
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 			      void *cookie, struct task_struct *task,
 			      struct pt_regs *regs)
 {
@@ -199,6 +208,9 @@ noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry,
 #if defined(CONFIG_VMAP_STACK) && defined(CONFIG_ARM_SDE_INTERFACE)
 		STACKINFO_SDEI(normal),
 		STACKINFO_SDEI(critical),
+#endif
+#ifdef CONFIG_EFI
+		STACKINFO_EFI,
 #endif
 	};
 	struct unwind_state state = {
diff --git linux-libre-6.1-gnu/arch/arm64/kernel/vdso.c linux-libre-6.1.56-gnu/arch/arm64/kernel/vdso.c
index 99ae81ab91a7..6ebb8dea5f09 100644
--- linux-libre-6.1-gnu/arch/arm64/kernel/vdso.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kernel/vdso.c
@@ -312,7 +312,7 @@ static int aarch32_alloc_kuser_vdso_page(void)
 
 	memcpy((void *)(vdso_page + 0x1000 - kuser_sz), __kuser_helper_start,
 	       kuser_sz);
-	aarch32_vectors_page = virt_to_page(vdso_page);
+	aarch32_vectors_page = virt_to_page((void *)vdso_page);
 	return 0;
 }
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/arm.c linux-libre-6.1.56-gnu/arch/arm64/kvm/arm.c
index 94d33e296e10..6cc380a15eb7 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/arm.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/arm.c
@@ -146,6 +146,16 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	if (ret)
 		return ret;
 
+	mutex_init(&kvm->arch.config_lock);
+
+#ifdef CONFIG_LOCKDEP
+	/* Clue in lockdep that the config_lock must be taken inside kvm->lock */
+	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->lock);
+#endif
+
 	ret = kvm_share_hyp(kvm, kvm + 1);
 	if (ret)
 		goto out_free_stage2_pgd;
@@ -324,6 +334,16 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 {
 	int err;
 
+	spin_lock_init(&vcpu->arch.mp_state_lock);
+
+#ifdef CONFIG_LOCKDEP
+	/* Inform lockdep that the config_lock is acquired after vcpu->mutex */
+	mutex_lock(&vcpu->mutex);
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+	mutex_unlock(&vcpu->mutex);
+#endif
+
 	/* Force users to call KVM_ARM_VCPU_INIT */
 	vcpu->arch.target = -1;
 	bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
@@ -441,34 +461,41 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	vcpu->cpu = -1;
 }
 
-void kvm_arm_vcpu_power_off(struct kvm_vcpu *vcpu)
+static void __kvm_arm_vcpu_power_off(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.mp_state.mp_state = KVM_MP_STATE_STOPPED;
+	WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_STOPPED);
 	kvm_make_request(KVM_REQ_SLEEP, vcpu);
 	kvm_vcpu_kick(vcpu);
 }
 
+void kvm_arm_vcpu_power_off(struct kvm_vcpu *vcpu)
+{
+	spin_lock(&vcpu->arch.mp_state_lock);
+	__kvm_arm_vcpu_power_off(vcpu);
+	spin_unlock(&vcpu->arch.mp_state_lock);
+}
+
 bool kvm_arm_vcpu_stopped(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.mp_state.mp_state == KVM_MP_STATE_STOPPED;
+	return READ_ONCE(vcpu->arch.mp_state.mp_state) == KVM_MP_STATE_STOPPED;
 }
 
 static void kvm_arm_vcpu_suspend(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.mp_state.mp_state = KVM_MP_STATE_SUSPENDED;
+	WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_SUSPENDED);
 	kvm_make_request(KVM_REQ_SUSPEND, vcpu);
 	kvm_vcpu_kick(vcpu);
 }
 
 static bool kvm_arm_vcpu_suspended(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.mp_state.mp_state == KVM_MP_STATE_SUSPENDED;
+	return READ_ONCE(vcpu->arch.mp_state.mp_state) == KVM_MP_STATE_SUSPENDED;
 }
 
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	*mp_state = vcpu->arch.mp_state;
+	*mp_state = READ_ONCE(vcpu->arch.mp_state);
 
 	return 0;
 }
@@ -478,12 +505,14 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 {
 	int ret = 0;
 
+	spin_lock(&vcpu->arch.mp_state_lock);
+
 	switch (mp_state->mp_state) {
 	case KVM_MP_STATE_RUNNABLE:
-		vcpu->arch.mp_state = *mp_state;
+		WRITE_ONCE(vcpu->arch.mp_state, *mp_state);
 		break;
 	case KVM_MP_STATE_STOPPED:
-		kvm_arm_vcpu_power_off(vcpu);
+		__kvm_arm_vcpu_power_off(vcpu);
 		break;
 	case KVM_MP_STATE_SUSPENDED:
 		kvm_arm_vcpu_suspend(vcpu);
@@ -492,6 +521,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 		ret = -EINVAL;
 	}
 
+	spin_unlock(&vcpu->arch.mp_state_lock);
+
 	return ret;
 }
 
@@ -585,9 +616,9 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	if (kvm_vm_is_protected(kvm))
 		kvm_call_hyp_nvhe(__pkvm_vcpu_init_traps, vcpu);
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
 	set_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &kvm->arch.flags);
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
 
 	return ret;
 }
@@ -661,13 +692,15 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)
 	 */
 	preempt_disable();
 	kvm_vgic_vmcr_sync(vcpu);
-	vgic_v4_put(vcpu, true);
+	vcpu_set_flag(vcpu, IN_WFI);
+	vgic_v4_put(vcpu);
 	preempt_enable();
 
 	kvm_vcpu_halt(vcpu);
 	vcpu_clear_flag(vcpu, IN_WFIT);
 
 	preempt_disable();
+	vcpu_clear_flag(vcpu, IN_WFI);
 	vgic_v4_load(vcpu);
 	preempt_enable();
 }
@@ -735,7 +768,7 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)
 		if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
 			/* The distributor enable bits were changed */
 			preempt_disable();
-			vgic_v4_put(vcpu, false);
+			vgic_v4_put(vcpu);
 			vgic_v4_load(vcpu);
 			preempt_enable();
 		}
@@ -1202,7 +1235,7 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 	if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features))
 		kvm_arm_vcpu_power_off(vcpu);
 	else
-		vcpu->arch.mp_state.mp_state = KVM_MP_STATE_RUNNABLE;
+		WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_RUNNABLE);
 
 	return 0;
 }
@@ -1870,12 +1903,33 @@ static int do_pkvm_init(u32 hyp_va_bits)
 	return ret;
 }
 
-static int kvm_hyp_init_protection(u32 hyp_va_bits)
+static u64 get_hyp_id_aa64pfr0_el1(void)
 {
-	void *addr = phys_to_virt(hyp_mem_base);
-	int ret;
+	/*
+	 * Track whether the system isn't affected by spectre/meltdown in the
+	 * hypervisor's view of id_aa64pfr0_el1, used for protected VMs.
+	 * Although this is per-CPU, we make it global for simplicity, e.g., not
+	 * to have to worry about vcpu migration.
+	 *
+	 * Unlike for non-protected VMs, userspace cannot override this for
+	 * protected VMs.
+	 */
+	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
 
-	kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+	val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) |
+		 ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3));
+
+	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
+			  arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED);
+	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
+			  arm64_get_meltdown_state() == SPECTRE_UNAFFECTED);
+
+	return val;
+}
+
+static void kvm_hyp_init_symbols(void)
+{
+	kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = get_hyp_id_aa64pfr0_el1();
 	kvm_nvhe_sym(id_aa64pfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
 	kvm_nvhe_sym(id_aa64isar0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR0_EL1);
 	kvm_nvhe_sym(id_aa64isar1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR1_EL1);
@@ -1883,6 +1937,12 @@ static int kvm_hyp_init_protection(u32 hyp_va_bits)
 	kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
 	kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR2_EL1);
+}
+
+static int kvm_hyp_init_protection(u32 hyp_va_bits)
+{
+	void *addr = phys_to_virt(hyp_mem_base);
+	int ret;
 
 	ret = create_hyp_mappings(addr, addr + hyp_mem_size, PAGE_HYP);
 	if (ret)
@@ -2057,6 +2117,8 @@ static int init_hyp_mode(void)
 		cpu_prepare_hyp_mode(cpu);
 	}
 
+	kvm_hyp_init_symbols();
+
 	if (is_protected_kvm_enabled()) {
 		init_cpu_logical_map();
 
@@ -2064,9 +2126,7 @@ static int init_hyp_mode(void)
 			err = -ENODEV;
 			goto out_err;
 		}
-	}
 
-	if (is_protected_kvm_enabled()) {
 		err = kvm_hyp_init_protection(hyp_va_bits);
 		if (err) {
 			kvm_err("Failed to init hyp memory protection\n");
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/guest.c linux-libre-6.1.56-gnu/arch/arm64/kvm/guest.c
index 2ff13a3f8479..dd20b8688d23 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/guest.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/guest.c
@@ -951,7 +951,9 @@ int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
 
 	switch (attr->group) {
 	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		mutex_lock(&vcpu->kvm->arch.config_lock);
 		ret = kvm_arm_pmu_v3_set_attr(vcpu, attr);
+		mutex_unlock(&vcpu->kvm->arch.config_lock);
 		break;
 	case KVM_ARM_VCPU_TIMER_CTRL:
 		ret = kvm_arm_timer_set_attr(vcpu, attr);
@@ -1059,7 +1061,7 @@ long kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
 		maddr = page_address(page);
 
 		if (!write) {
-			if (test_bit(PG_mte_tagged, &page->flags))
+			if (page_mte_tagged(page))
 				num_tags = mte_copy_tags_to_user(tags, maddr,
 							MTE_GRANULES_PER_PAGE);
 			else
@@ -1076,7 +1078,7 @@ long kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
 			 * completed fully
 			 */
 			if (num_tags == MTE_GRANULES_PER_PAGE)
-				set_bit(PG_mte_tagged, &page->flags);
+				set_page_mte_tagged(page);
 
 			kvm_release_pfn_dirty(pfn);
 		}
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
index 3330d1b76bdd..081aca8f432e 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -81,7 +81,12 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 	 * EL1 instead of being trapped to EL2.
 	 */
 	if (kvm_arm_support_pmu_v3()) {
+		struct kvm_cpu_context *hctxt;
+
 		write_sysreg(0, pmselr_el0);
+
+		hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+		ctxt_sys_reg(hctxt, PMUSERENR_EL0) = read_sysreg(pmuserenr_el0);
 		write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
 	}
 
@@ -105,8 +110,12 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 	write_sysreg(vcpu->arch.mdcr_el2_host, mdcr_el2);
 
 	write_sysreg(0, hstr_el2);
-	if (kvm_arm_support_pmu_v3())
-		write_sysreg(0, pmuserenr_el0);
+	if (kvm_arm_support_pmu_v3()) {
+		struct kvm_cpu_context *hctxt;
+
+		hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+		write_sysreg(ctxt_sys_reg(hctxt, PMUSERENR_EL0), pmuserenr_el0);
+	}
 
 	if (cpus_have_final_cap(ARM64_SME)) {
 		sysreg_clear_set_s(SYS_HFGRTR_EL2, 0,
@@ -351,17 +360,21 @@ static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
 	return false;
 }
 
-static bool kvm_hyp_handle_iabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+static bool kvm_hyp_handle_memory_fault(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	if (!__populate_fault_info(vcpu))
 		return true;
 
 	return false;
 }
+static bool kvm_hyp_handle_iabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+	__alias(kvm_hyp_handle_memory_fault);
+static bool kvm_hyp_handle_watchpt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+	__alias(kvm_hyp_handle_memory_fault);
 
 static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
-	if (!__populate_fault_info(vcpu))
+	if (kvm_hyp_handle_memory_fault(vcpu, exit_code))
 		return true;
 
 	if (static_branch_unlikely(&vgic_v2_cpuif_trap)) {
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
index 07edfc7524c9..37440e1dda93 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -33,11 +33,14 @@
  * Allow for protected VMs:
  * - Floating-point and Advanced SIMD
  * - Data Independent Timing
+ * - Spectre/Meltdown Mitigation
  */
 #define PVM_ID_AA64PFR0_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP) | \
 	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3) \
 	)
 
 /*
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hyp/nvhe/switch.c linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/nvhe/switch.c
index c2cb46ca4fb6..895fb3200076 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hyp/nvhe/switch.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -186,6 +186,7 @@ static const exit_handler_fn hyp_exit_handlers[] = {
 	[ESR_ELx_EC_FP_ASIMD]		= kvm_hyp_handle_fpsimd,
 	[ESR_ELx_EC_IABT_LOW]		= kvm_hyp_handle_iabt_low,
 	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
+	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
 };
 
@@ -196,6 +197,7 @@ static const exit_handler_fn pvm_exit_handlers[] = {
 	[ESR_ELx_EC_FP_ASIMD]		= kvm_hyp_handle_fpsimd,
 	[ESR_ELx_EC_IABT_LOW]		= kvm_hyp_handle_iabt_low,
 	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
+	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hyp/nvhe/sys_regs.c linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/nvhe/sys_regs.c
index 0f9ac25afdf4..3d5121ee3977 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hyp/nvhe/sys_regs.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -84,19 +84,12 @@ static u64 get_restricted_features_unsigned(u64 sys_reg_val,
 
 static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu)
 {
-	const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm);
 	u64 set_mask = 0;
 	u64 allow_mask = PVM_ID_AA64PFR0_ALLOW;
 
 	set_mask |= get_restricted_features_unsigned(id_aa64pfr0_el1_sys_val,
 		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED);
 
-	/* Spectre and Meltdown mitigation in KVM */
-	set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
-			       (u64)kvm->arch.pfr0_csv2);
-	set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
-			       (u64)kvm->arch.pfr0_csv3);
-
 	return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask;
 }
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hyp/pgtable.c linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/pgtable.c
index cdf8e76b0be1..ae5f6b5ac80f 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hyp/pgtable.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/pgtable.c
@@ -595,12 +595,22 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 		lvls = 2;
 	vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls);
 
+#ifdef CONFIG_ARM64_HW_AFDBM
 	/*
 	 * Enable the Hardware Access Flag management, unconditionally
-	 * on all CPUs. The features is RES0 on CPUs without the support
-	 * and must be ignored by the CPUs.
+	 * on all CPUs. In systems that have asymmetric support for the feature
+	 * this allows KVM to leverage hardware support on the subset of cores
+	 * that implement the feature.
+	 *
+	 * The architecture requires VTCR_EL2.HA to be RES0 (thus ignored by
+	 * hardware) on implementations that do not advertise support for the
+	 * feature. As such, setting HA unconditionally is safe, unless you
+	 * happen to be running on a design that has unadvertised support for
+	 * HAFDBS. Here be dragons.
 	 */
-	vtcr |= VTCR_EL2_HA;
+	if (!cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
+		vtcr |= VTCR_EL2_HA;
+#endif /* CONFIG_ARM64_HW_AFDBM */
 
 	/* Set the vmid bits */
 	vtcr |= (get_vmid_bits(mmfr1) == 16) ?
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hyp/vhe/switch.c linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/vhe/switch.c
index 1a97391fedd2..45ac4a59cc2c 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hyp/vhe/switch.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hyp/vhe/switch.c
@@ -110,6 +110,7 @@ static const exit_handler_fn hyp_exit_handlers[] = {
 	[ESR_ELx_EC_FP_ASIMD]		= kvm_hyp_handle_fpsimd,
 	[ESR_ELx_EC_IABT_LOW]		= kvm_hyp_handle_iabt_low,
 	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
+	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
 };
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/hypercalls.c linux-libre-6.1.56-gnu/arch/arm64/kvm/hypercalls.c
index c9f401fa01a9..1f5beebf6217 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/hypercalls.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/hypercalls.c
@@ -377,7 +377,7 @@ static int kvm_arm_set_fw_reg_bmap(struct kvm_vcpu *vcpu, u64 reg_id, u64 val)
 	if (val & ~fw_reg_features)
 		return -EINVAL;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
 
 	if (test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &kvm->arch.flags) &&
 	    val != *fw_reg_bmap) {
@@ -387,7 +387,7 @@ static int kvm_arm_set_fw_reg_bmap(struct kvm_vcpu *vcpu, u64 reg_id, u64 val)
 
 	WRITE_ONCE(*fw_reg_bmap, val);
 out:
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
 	return ret;
 }
 
@@ -397,6 +397,8 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 	int wa_level;
 
+	if (KVM_REG_SIZE(reg->id) != sizeof(val))
+		return -ENOENT;
 	if (copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)))
 		return -EFAULT;
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/mmu.c linux-libre-6.1.56-gnu/arch/arm64/kvm/mmu.c
index 60ee3d9f01f8..54ccdcc2dbdf 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/mmu.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/mmu.c
@@ -646,14 +646,33 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 				   CONFIG_PGTABLE_LEVELS),
 		.mm_ops		= &kvm_user_mm_ops,
 	};
+	unsigned long flags;
 	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
 	u32 level = ~0;
 	int ret;
 
+	/*
+	 * Disable IRQs so that we hazard against a concurrent
+	 * teardown of the userspace page tables (which relies on
+	 * IPI-ing threads).
+	 */
+	local_irq_save(flags);
 	ret = kvm_pgtable_get_leaf(&pgt, addr, &pte, &level);
-	VM_BUG_ON(ret);
-	VM_BUG_ON(level >= KVM_PGTABLE_MAX_LEVELS);
-	VM_BUG_ON(!(pte & PTE_VALID));
+	local_irq_restore(flags);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Not seeing an error, but not updating level? Something went
+	 * deeply wrong...
+	 */
+	if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS))
+		return -EFAULT;
+
+	/* Oops, the userspace PTs are gone... Replay the fault */
+	if (!kvm_pte_valid(pte))
+		return -EAGAIN;
 
 	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(level));
 }
@@ -1006,7 +1025,7 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
  *
  * Returns the size of the mapping.
  */
-static unsigned long
+static long
 transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 			    unsigned long hva, kvm_pfn_t *pfnp,
 			    phys_addr_t *ipap)
@@ -1018,8 +1037,15 @@ transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 	 * sure that the HVA and IPA are sufficiently aligned and that the
 	 * block map is contained within the memslot.
 	 */
-	if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE) &&
-	    get_user_mapping_size(kvm, hva) >= PMD_SIZE) {
+	if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) {
+		int sz = get_user_mapping_size(kvm, hva);
+
+		if (sz < 0)
+			return sz;
+
+		if (sz < PMD_SIZE)
+			return PAGE_SIZE;
+
 		/*
 		 * The address we faulted on is backed by a transparent huge
 		 * page.  However, because we map the compound huge page and
@@ -1110,9 +1136,9 @@ static int sanitise_mte_tags(struct kvm *kvm, kvm_pfn_t pfn,
 		return -EFAULT;
 
 	for (i = 0; i < nr_pages; i++, page++) {
-		if (!test_bit(PG_mte_tagged, &page->flags)) {
+		if (!page_mte_tagged(page)) {
 			mte_clear_page_tags(page_address(page));
-			set_bit(PG_mte_tagged, &page->flags);
+			set_page_mte_tagged(page);
 		}
 	}
 
@@ -1138,7 +1164,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	bool logging_active = memslot_is_logging(memslot);
 	bool use_read_lock = false;
 	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
-	unsigned long vma_pagesize, fault_granule;
+	long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 
@@ -1152,6 +1178,20 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		return -EFAULT;
 	}
 
+	/*
+	 * Permission faults just need to update the existing leaf entry,
+	 * and so normally don't require allocations from the memcache. The
+	 * only exception to this is when dirty logging is enabled at runtime
+	 * and a write fault needs to collapse a block entry into a table.
+	 */
+	if (fault_status != FSC_PERM ||
+	    (logging_active && write_fault)) {
+		ret = kvm_mmu_topup_memory_cache(memcache,
+						 kvm_mmu_cache_min_pages(kvm));
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Let's check if we will get back a huge page backed by hugetlbfs, or
 	 * get block mapping for device MMIO region.
@@ -1208,36 +1248,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		fault_ipa &= ~(vma_pagesize - 1);
 
 	gfn = fault_ipa >> PAGE_SHIFT;
-	mmap_read_unlock(current->mm);
-
-	/*
-	 * Permission faults just need to update the existing leaf entry,
-	 * and so normally don't require allocations from the memcache. The
-	 * only exception to this is when dirty logging is enabled at runtime
-	 * and a write fault needs to collapse a block entry into a table.
-	 */
-	if (fault_status != FSC_PERM || (logging_active && write_fault)) {
-		ret = kvm_mmu_topup_memory_cache(memcache,
-						 kvm_mmu_cache_min_pages(kvm));
-		if (ret)
-			return ret;
-	}
 
-	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
 	/*
-	 * Ensure the read of mmu_invalidate_seq happens before we call
-	 * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
-	 * the page we just got a reference to gets unmapped before we have a
-	 * chance to grab the mmu_lock, which ensure that if the page gets
-	 * unmapped afterwards, the call to kvm_unmap_gfn will take it away
-	 * from us again properly. This smp_rmb() interacts with the smp_wmb()
-	 * in kvm_mmu_notifier_invalidate_<page|range_end>.
+	 * Read mmu_invalidate_seq so that KVM can detect if the results of
+	 * vma_lookup() or __gfn_to_pfn_memslot() become stale prior to
+	 * acquiring kvm->mmu_lock.
 	 *
-	 * Besides, __gfn_to_pfn_memslot() instead of gfn_to_pfn_prot() is
-	 * used to avoid unnecessary overhead introduced to locate the memory
-	 * slot because it's always fixed even @gfn is adjusted for huge pages.
+	 * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs
+	 * with the smp_wmb() in kvm_mmu_invalidate_end().
 	 */
-	smp_rmb();
+	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
+	mmap_read_unlock(current->mm);
 
 	pfn = __gfn_to_pfn_memslot(memslot, gfn, false, NULL,
 				   write_fault, &writable, NULL);
@@ -1295,6 +1316,11 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
 								   hva, &pfn,
 								   &fault_ipa);
+
+		if (vma_pagesize < 0) {
+			ret = vma_pagesize;
+			goto out_unlock;
+		}
 	}
 
 	if (fault_status != FSC_PERM && !device && kvm_has_mte(kvm)) {
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/pmu-emul.c linux-libre-6.1.56-gnu/arch/arm64/kvm/pmu-emul.c
index 0003c7d37533..c7e5f6a28c28 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/pmu-emul.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/pmu-emul.c
@@ -15,16 +15,14 @@
 #include <kvm/arm_pmu.h>
 #include <kvm/arm_vgic.h>
 
+#define PERF_ATTR_CFG1_COUNTER_64BIT	BIT(0)
+
 DEFINE_STATIC_KEY_FALSE(kvm_arm_pmu_available);
 
 static LIST_HEAD(arm_pmus);
 static DEFINE_MUTEX(arm_pmus_lock);
 
 static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx);
-static void kvm_pmu_update_pmc_chained(struct kvm_vcpu *vcpu, u64 select_idx);
-static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc);
-
-#define PERF_ATTR_CFG1_KVM_PMU_CHAINED 0x1
 
 static u32 kvm_pmu_event_mask(struct kvm *kvm)
 {
@@ -52,11 +50,22 @@ static u32 kvm_pmu_event_mask(struct kvm *kvm)
  * @select_idx: The counter index
  */
 static bool kvm_pmu_idx_is_64bit(struct kvm_vcpu *vcpu, u64 select_idx)
+{
+	return (select_idx == ARMV8_PMU_CYCLE_IDX);
+}
+
+static bool kvm_pmu_idx_has_64bit_overflow(struct kvm_vcpu *vcpu, u64 select_idx)
 {
 	return (select_idx == ARMV8_PMU_CYCLE_IDX &&
 		__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_LC);
 }
 
+static bool kvm_pmu_counter_can_chain(struct kvm_vcpu *vcpu, u64 idx)
+{
+	return (!(idx & 1) && (idx + 1) < ARMV8_PMU_CYCLE_IDX &&
+		!kvm_pmu_idx_has_64bit_overflow(vcpu, idx));
+}
+
 static struct kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc)
 {
 	struct kvm_pmu *pmu;
@@ -69,91 +78,22 @@ static struct kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc)
 }
 
 /**
- * kvm_pmu_pmc_is_chained - determine if the pmc is chained
- * @pmc: The PMU counter pointer
- */
-static bool kvm_pmu_pmc_is_chained(struct kvm_pmc *pmc)
-{
-	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
-
-	return test_bit(pmc->idx >> 1, vcpu->arch.pmu.chained);
-}
-
-/**
- * kvm_pmu_idx_is_high_counter - determine if select_idx is a high/low counter
- * @select_idx: The counter index
- */
-static bool kvm_pmu_idx_is_high_counter(u64 select_idx)
-{
-	return select_idx & 0x1;
-}
-
-/**
- * kvm_pmu_get_canonical_pmc - obtain the canonical pmc
- * @pmc: The PMU counter pointer
- *
- * When a pair of PMCs are chained together we use the low counter (canonical)
- * to hold the underlying perf event.
- */
-static struct kvm_pmc *kvm_pmu_get_canonical_pmc(struct kvm_pmc *pmc)
-{
-	if (kvm_pmu_pmc_is_chained(pmc) &&
-	    kvm_pmu_idx_is_high_counter(pmc->idx))
-		return pmc - 1;
-
-	return pmc;
-}
-static struct kvm_pmc *kvm_pmu_get_alternate_pmc(struct kvm_pmc *pmc)
-{
-	if (kvm_pmu_idx_is_high_counter(pmc->idx))
-		return pmc - 1;
-	else
-		return pmc + 1;
-}
-
-/**
- * kvm_pmu_idx_has_chain_evtype - determine if the event type is chain
+ * kvm_pmu_get_counter_value - get PMU counter value
  * @vcpu: The vcpu pointer
  * @select_idx: The counter index
  */
-static bool kvm_pmu_idx_has_chain_evtype(struct kvm_vcpu *vcpu, u64 select_idx)
-{
-	u64 eventsel, reg;
-
-	select_idx |= 0x1;
-
-	if (select_idx == ARMV8_PMU_CYCLE_IDX)
-		return false;
-
-	reg = PMEVTYPER0_EL0 + select_idx;
-	eventsel = __vcpu_sys_reg(vcpu, reg) & kvm_pmu_event_mask(vcpu->kvm);
-
-	return eventsel == ARMV8_PMUV3_PERFCTR_CHAIN;
-}
-
-/**
- * kvm_pmu_get_pair_counter_value - get PMU counter value
- * @vcpu: The vcpu pointer
- * @pmc: The PMU counter pointer
- */
-static u64 kvm_pmu_get_pair_counter_value(struct kvm_vcpu *vcpu,
-					  struct kvm_pmc *pmc)
+u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
 {
-	u64 counter, counter_high, reg, enabled, running;
-
-	if (kvm_pmu_pmc_is_chained(pmc)) {
-		pmc = kvm_pmu_get_canonical_pmc(pmc);
-		reg = PMEVCNTR0_EL0 + pmc->idx;
+	u64 counter, reg, enabled, running;
+	struct kvm_pmu *pmu = &vcpu->arch.pmu;
+	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
 
-		counter = __vcpu_sys_reg(vcpu, reg);
-		counter_high = __vcpu_sys_reg(vcpu, reg + 1);
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return 0;
 
-		counter = lower_32_bits(counter) | (counter_high << 32);
-	} else {
-		reg = (pmc->idx == ARMV8_PMU_CYCLE_IDX)
-		      ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + pmc->idx;
-		counter = __vcpu_sys_reg(vcpu, reg);
-	}
+	reg = (pmc->idx == ARMV8_PMU_CYCLE_IDX)
+		? PMCCNTR_EL0 : PMEVCNTR0_EL0 + pmc->idx;
+	counter = __vcpu_sys_reg(vcpu, reg);
 
 	/*
 	 * The real counter value is equal to the value of counter register plus
@@ -163,29 +103,7 @@ static u64 kvm_pmu_get_pair_counter_value(struct kvm_vcpu *vcpu,
 		counter += perf_event_read_value(pmc->perf_event, &enabled,
 						 &running);
 
-	return counter;
-}
-
-/**
- * kvm_pmu_get_counter_value - get PMU counter value
- * @vcpu: The vcpu pointer
- * @select_idx: The counter index
- */
-u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
-{
-	u64 counter;
-	struct kvm_pmu *pmu = &vcpu->arch.pmu;
-	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
-
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return 0;
-
-	counter = kvm_pmu_get_pair_counter_value(vcpu, pmc);
-
-	if (kvm_pmu_pmc_is_chained(pmc) &&
-	    kvm_pmu_idx_is_high_counter(select_idx))
-		counter = upper_32_bits(counter);
-	else if (select_idx != ARMV8_PMU_CYCLE_IDX)
+	if (!kvm_pmu_idx_is_64bit(vcpu, select_idx))
 		counter = lower_32_bits(counter);
 
 	return counter;
@@ -218,7 +136,6 @@ void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
  */
 static void kvm_pmu_release_perf_event(struct kvm_pmc *pmc)
 {
-	pmc = kvm_pmu_get_canonical_pmc(pmc);
 	if (pmc->perf_event) {
 		perf_event_disable(pmc->perf_event);
 		perf_event_release_kernel(pmc->perf_event);
@@ -236,11 +153,10 @@ static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc)
 {
 	u64 counter, reg, val;
 
-	pmc = kvm_pmu_get_canonical_pmc(pmc);
 	if (!pmc->perf_event)
 		return;
 
-	counter = kvm_pmu_get_pair_counter_value(vcpu, pmc);
+	counter = kvm_pmu_get_counter_value(vcpu, pmc->idx);
 
 	if (pmc->idx == ARMV8_PMU_CYCLE_IDX) {
 		reg = PMCCNTR_EL0;
@@ -252,9 +168,6 @@ static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc)
 
 	__vcpu_sys_reg(vcpu, reg) = val;
 
-	if (kvm_pmu_pmc_is_chained(pmc))
-		__vcpu_sys_reg(vcpu, reg + 1) = upper_32_bits(counter);
-
 	kvm_pmu_release_perf_event(pmc);
 }
 
@@ -285,8 +198,6 @@ void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu)
 
 	for_each_set_bit(i, &mask, 32)
 		kvm_pmu_stop_counter(vcpu, &pmu->pmc[i]);
-
-	bitmap_zero(vcpu->arch.pmu.chained, ARMV8_PMU_MAX_COUNTER_PAIRS);
 }
 
 /**
@@ -340,12 +251,9 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
 
 		pmc = &pmu->pmc[i];
 
-		/* A change in the enable state may affect the chain state */
-		kvm_pmu_update_pmc_chained(vcpu, i);
-		kvm_pmu_create_perf_event(vcpu, i);
-
-		/* At this point, pmc must be the canonical */
-		if (pmc->perf_event) {
+		if (!pmc->perf_event) {
+			kvm_pmu_create_perf_event(vcpu, i);
+		} else {
 			perf_event_enable(pmc->perf_event);
 			if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
 				kvm_debug("fail to enable perf event\n");
@@ -375,11 +283,6 @@ void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
 
 		pmc = &pmu->pmc[i];
 
-		/* A change in the enable state may affect the chain state */
-		kvm_pmu_update_pmc_chained(vcpu, i);
-		kvm_pmu_create_perf_event(vcpu, i);
-
-		/* At this point, pmc must be the canonical */
 		if (pmc->perf_event)
 			perf_event_disable(pmc->perf_event);
 	}
@@ -484,6 +387,65 @@ static void kvm_pmu_perf_overflow_notify_vcpu(struct irq_work *work)
 	kvm_vcpu_kick(vcpu);
 }
 
+/*
+ * Perform an increment on any of the counters described in @mask,
+ * generating the overflow if required, and propagate it as a chained
+ * event if possible.
+ */
+static void kvm_pmu_counter_increment(struct kvm_vcpu *vcpu,
+				      unsigned long mask, u32 event)
+{
+	int i;
+
+	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E))
+		return;
+
+	/* Weed out disabled counters */
+	mask &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
+
+	for_each_set_bit(i, &mask, ARMV8_PMU_CYCLE_IDX) {
+		u64 type, reg;
+
+		/* Filter on event type */
+		type = __vcpu_sys_reg(vcpu, PMEVTYPER0_EL0 + i);
+		type &= kvm_pmu_event_mask(vcpu->kvm);
+		if (type != event)
+			continue;
+
+		/* Increment this counter */
+		reg = __vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) + 1;
+		reg = lower_32_bits(reg);
+		__vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) = reg;
+
+		if (reg) /* No overflow? move on */
+			continue;
+
+		/* Mark overflow */
+		__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i);
+
+		if (kvm_pmu_counter_can_chain(vcpu, i))
+			kvm_pmu_counter_increment(vcpu, BIT(i + 1),
+						  ARMV8_PMUV3_PERFCTR_CHAIN);
+	}
+}
+
+/* Compute the sample period for a given counter value */
+static u64 compute_period(struct kvm_vcpu *vcpu, u64 select_idx, u64 counter)
+{
+	u64 val;
+
+	if (kvm_pmu_idx_is_64bit(vcpu, select_idx)) {
+		if (!kvm_pmu_idx_has_64bit_overflow(vcpu, select_idx))
+			val = -(counter & GENMASK(31, 0));
+		else
+			val = (-counter) & GENMASK(63, 0);
+	} else {
+		val = (-counter) & GENMASK(31, 0);
+	}
+
+	return val;
+}
+
 /**
  * When the perf event overflows, set the overflow status and inform the vcpu.
  */
@@ -503,10 +465,7 @@ static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
 	 * Reset the sample period to the architectural limit,
 	 * i.e. the point where the counter overflows.
 	 */
-	period = -(local64_read(&perf_event->count));
-
-	if (!kvm_pmu_idx_is_64bit(vcpu, pmc->idx))
-		period &= GENMASK(31, 0);
+	period = compute_period(vcpu, idx, local64_read(&perf_event->count));
 
 	local64_set(&perf_event->hw.period_left, 0);
 	perf_event->attr.sample_period = period;
@@ -514,6 +473,10 @@ static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
 
 	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(idx);
 
+	if (kvm_pmu_counter_can_chain(vcpu, idx))
+		kvm_pmu_counter_increment(vcpu, BIT(idx + 1),
+					  ARMV8_PMUV3_PERFCTR_CHAIN);
+
 	if (kvm_pmu_overflow_status(vcpu)) {
 		kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
 
@@ -533,50 +496,7 @@ static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
  */
 void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val)
 {
-	struct kvm_pmu *pmu = &vcpu->arch.pmu;
-	int i;
-
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
-	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E))
-		return;
-
-	/* Weed out disabled counters */
-	val &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
-
-	for (i = 0; i < ARMV8_PMU_CYCLE_IDX; i++) {
-		u64 type, reg;
-
-		if (!(val & BIT(i)))
-			continue;
-
-		/* PMSWINC only applies to ... SW_INC! */
-		type = __vcpu_sys_reg(vcpu, PMEVTYPER0_EL0 + i);
-		type &= kvm_pmu_event_mask(vcpu->kvm);
-		if (type != ARMV8_PMUV3_PERFCTR_SW_INCR)
-			continue;
-
-		/* increment this even SW_INC counter */
-		reg = __vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) + 1;
-		reg = lower_32_bits(reg);
-		__vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) = reg;
-
-		if (reg) /* no overflow on the low part */
-			continue;
-
-		if (kvm_pmu_pmc_is_chained(&pmu->pmc[i])) {
-			/* increment the high counter */
-			reg = __vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i + 1) + 1;
-			reg = lower_32_bits(reg);
-			__vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i + 1) = reg;
-			if (!reg) /* mark overflow on the high counter */
-				__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i + 1);
-		} else {
-			/* mark overflow on low counter */
-			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i);
-		}
-	}
+	kvm_pmu_counter_increment(vcpu, val, ARMV8_PMUV3_PERFCTR_SW_INCR);
 }
 
 /**
@@ -591,6 +511,9 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 	if (!kvm_vcpu_has_pmu(vcpu))
 		return;
 
+	/* The reset bits don't indicate any state, and shouldn't be saved. */
+	__vcpu_sys_reg(vcpu, PMCR_EL0) = val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P);
+
 	if (val & ARMV8_PMU_PMCR_E) {
 		kvm_pmu_enable_counter_mask(vcpu,
 		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
@@ -608,6 +531,7 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 		for_each_set_bit(i, &mask, 32)
 			kvm_pmu_set_counter_value(vcpu, i, 0);
 	}
+	kvm_vcpu_pmu_restore_guest(vcpu);
 }
 
 static bool kvm_pmu_counter_is_enabled(struct kvm_vcpu *vcpu, u64 select_idx)
@@ -625,18 +549,11 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
 {
 	struct arm_pmu *arm_pmu = vcpu->kvm->arch.arm_pmu;
 	struct kvm_pmu *pmu = &vcpu->arch.pmu;
-	struct kvm_pmc *pmc;
+	struct kvm_pmc *pmc = &pmu->pmc[select_idx];
 	struct perf_event *event;
 	struct perf_event_attr attr;
 	u64 eventsel, counter, reg, data;
 
-	/*
-	 * For chained counters the event type and filtering attributes are
-	 * obtained from the low/even counter. We also use this counter to
-	 * determine if the event is enabled/disabled.
-	 */
-	pmc = kvm_pmu_get_canonical_pmc(&pmu->pmc[select_idx]);
-
 	reg = (pmc->idx == ARMV8_PMU_CYCLE_IDX)
 	      ? PMCCFILTR_EL0 : PMEVTYPER0_EL0 + pmc->idx;
 	data = __vcpu_sys_reg(vcpu, reg);
@@ -647,8 +564,12 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
 	else
 		eventsel = data & kvm_pmu_event_mask(vcpu->kvm);
 
-	/* Software increment event doesn't need to be backed by a perf event */
-	if (eventsel == ARMV8_PMUV3_PERFCTR_SW_INCR)
+	/*
+	 * Neither SW increment nor chained events need to be backed
+	 * by a perf event.
+	 */
+	if (eventsel == ARMV8_PMUV3_PERFCTR_SW_INCR ||
+	    eventsel == ARMV8_PMUV3_PERFCTR_CHAIN)
 		return;
 
 	/*
@@ -670,30 +591,20 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
 	attr.exclude_host = 1; /* Don't count host events */
 	attr.config = eventsel;
 
-	counter = kvm_pmu_get_pair_counter_value(vcpu, pmc);
+	counter = kvm_pmu_get_counter_value(vcpu, select_idx);
 
-	if (kvm_pmu_pmc_is_chained(pmc)) {
-		/**
-		 * The initial sample period (overflow count) of an event. For
-		 * chained counters we only support overflow interrupts on the
-		 * high counter.
-		 */
-		attr.sample_period = (-counter) & GENMASK(63, 0);
-		attr.config1 |= PERF_ATTR_CFG1_KVM_PMU_CHAINED;
+	/*
+	 * If counting with a 64bit counter, advertise it to the perf
+	 * code, carefully dealing with the initial sample period
+	 * which also depends on the overflow.
+	 */
+	if (kvm_pmu_idx_is_64bit(vcpu, select_idx))
+		attr.config1 |= PERF_ATTR_CFG1_COUNTER_64BIT;
 
-		event = perf_event_create_kernel_counter(&attr, -1, current,
-							 kvm_pmu_perf_overflow,
-							 pmc + 1);
-	} else {
-		/* The initial sample period (overflow count) of an event. */
-		if (kvm_pmu_idx_is_64bit(vcpu, pmc->idx))
-			attr.sample_period = (-counter) & GENMASK(63, 0);
-		else
-			attr.sample_period = (-counter) & GENMASK(31, 0);
+	attr.sample_period = compute_period(vcpu, select_idx, counter);
 
-		event = perf_event_create_kernel_counter(&attr, -1, current,
+	event = perf_event_create_kernel_counter(&attr, -1, current,
 						 kvm_pmu_perf_overflow, pmc);
-	}
 
 	if (IS_ERR(event)) {
 		pr_err_once("kvm: pmu event creation failed %ld\n",
@@ -704,41 +615,6 @@ static void kvm_pmu_create_perf_event(struct kvm_vcpu *vcpu, u64 select_idx)
 	pmc->perf_event = event;
 }
 
-/**
- * kvm_pmu_update_pmc_chained - update chained bitmap
- * @vcpu: The vcpu pointer
- * @select_idx: The number of selected counter
- *
- * Update the chained bitmap based on the event type written in the
- * typer register and the enable state of the odd register.
- */
-static void kvm_pmu_update_pmc_chained(struct kvm_vcpu *vcpu, u64 select_idx)
-{
-	struct kvm_pmu *pmu = &vcpu->arch.pmu;
-	struct kvm_pmc *pmc = &pmu->pmc[select_idx], *canonical_pmc;
-	bool new_state, old_state;
-
-	old_state = kvm_pmu_pmc_is_chained(pmc);
-	new_state = kvm_pmu_idx_has_chain_evtype(vcpu, pmc->idx) &&
-		    kvm_pmu_counter_is_enabled(vcpu, pmc->idx | 0x1);
-
-	if (old_state == new_state)
-		return;
-
-	canonical_pmc = kvm_pmu_get_canonical_pmc(pmc);
-	kvm_pmu_stop_counter(vcpu, canonical_pmc);
-	if (new_state) {
-		/*
-		 * During promotion from !chained to chained we must ensure
-		 * the adjacent counter is stopped and its event destroyed
-		 */
-		kvm_pmu_stop_counter(vcpu, kvm_pmu_get_alternate_pmc(pmc));
-		set_bit(pmc->idx >> 1, vcpu->arch.pmu.chained);
-		return;
-	}
-	clear_bit(pmc->idx >> 1, vcpu->arch.pmu.chained);
-}
-
 /**
  * kvm_pmu_set_counter_event_type - set selected counter to monitor some event
  * @vcpu: The vcpu pointer
@@ -766,7 +642,6 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
 
 	__vcpu_sys_reg(vcpu, reg) = data & mask;
 
-	kvm_pmu_update_pmc_chained(vcpu, select_idx);
 	kvm_pmu_create_perf_event(vcpu, select_idx);
 }
 
@@ -975,7 +850,7 @@ static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
 	struct arm_pmu *arm_pmu;
 	int ret = -ENXIO;
 
-	mutex_lock(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.config_lock);
 	mutex_lock(&arm_pmus_lock);
 
 	list_for_each_entry(entry, &arm_pmus, entry) {
@@ -995,7 +870,6 @@ static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
 	}
 
 	mutex_unlock(&arm_pmus_lock);
-	mutex_unlock(&kvm->lock);
 	return ret;
 }
 
@@ -1003,22 +877,20 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 {
 	struct kvm *kvm = vcpu->kvm;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	if (!kvm_vcpu_has_pmu(vcpu))
 		return -ENODEV;
 
 	if (vcpu->arch.pmu.created)
 		return -EBUSY;
 
-	mutex_lock(&kvm->lock);
 	if (!kvm->arch.arm_pmu) {
 		/* No PMU set, get the default one */
 		kvm->arch.arm_pmu = kvm_pmu_probe_armpmu();
-		if (!kvm->arch.arm_pmu) {
-			mutex_unlock(&kvm->lock);
+		if (!kvm->arch.arm_pmu)
 			return -ENODEV;
-		}
 	}
-	mutex_unlock(&kvm->lock);
 
 	switch (attr->attr) {
 	case KVM_ARM_VCPU_PMU_V3_IRQ: {
@@ -1062,19 +934,13 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 		     filter.action != KVM_PMU_EVENT_DENY))
 			return -EINVAL;
 
-		mutex_lock(&kvm->lock);
-
-		if (test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &kvm->arch.flags)) {
-			mutex_unlock(&kvm->lock);
+		if (test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &kvm->arch.flags))
 			return -EBUSY;
-		}
 
 		if (!kvm->arch.pmu_filter) {
 			kvm->arch.pmu_filter = bitmap_alloc(nr_events, GFP_KERNEL_ACCOUNT);
-			if (!kvm->arch.pmu_filter) {
-				mutex_unlock(&kvm->lock);
+			if (!kvm->arch.pmu_filter)
 				return -ENOMEM;
-			}
 
 			/*
 			 * The default depends on the first applied filter.
@@ -1093,8 +959,6 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 		else
 			bitmap_clear(kvm->arch.pmu_filter, filter.base_event, filter.nevents);
 
-		mutex_unlock(&kvm->lock);
-
 		return 0;
 	}
 	case KVM_ARM_VCPU_PMU_V3_SET_PMU: {
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/psci.c linux-libre-6.1.56-gnu/arch/arm64/kvm/psci.c
index 7fbc4c1b9df0..5767e6baa61a 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/psci.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/psci.c
@@ -62,6 +62,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	struct vcpu_reset_state *reset_state;
 	struct kvm *kvm = source_vcpu->kvm;
 	struct kvm_vcpu *vcpu = NULL;
+	int ret = PSCI_RET_SUCCESS;
 	unsigned long cpu_id;
 
 	cpu_id = smccc_get_arg1(source_vcpu);
@@ -76,11 +77,15 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 */
 	if (!vcpu)
 		return PSCI_RET_INVALID_PARAMS;
+
+	spin_lock(&vcpu->arch.mp_state_lock);
 	if (!kvm_arm_vcpu_stopped(vcpu)) {
 		if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
-			return PSCI_RET_ALREADY_ON;
+			ret = PSCI_RET_ALREADY_ON;
 		else
-			return PSCI_RET_INVALID_PARAMS;
+			ret = PSCI_RET_INVALID_PARAMS;
+
+		goto out_unlock;
 	}
 
 	reset_state = &vcpu->arch.reset_state;
@@ -96,7 +101,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 */
 	reset_state->r0 = smccc_get_arg3(source_vcpu);
 
-	WRITE_ONCE(reset_state->reset, true);
+	reset_state->reset = true;
 	kvm_make_request(KVM_REQ_VCPU_RESET, vcpu);
 
 	/*
@@ -108,7 +113,9 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	vcpu->arch.mp_state.mp_state = KVM_MP_STATE_RUNNABLE;
 	kvm_vcpu_wake_up(vcpu);
 
-	return PSCI_RET_SUCCESS;
+out_unlock:
+	spin_unlock(&vcpu->arch.mp_state_lock);
+	return ret;
 }
 
 static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
@@ -168,8 +175,11 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type, u64 flags)
 	 * after this call is handled and before the VCPUs have been
 	 * re-initialized.
 	 */
-	kvm_for_each_vcpu(i, tmp, vcpu->kvm)
-		tmp->arch.mp_state.mp_state = KVM_MP_STATE_STOPPED;
+	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
+		spin_lock(&tmp->arch.mp_state_lock);
+		WRITE_ONCE(tmp->arch.mp_state.mp_state, KVM_MP_STATE_STOPPED);
+		spin_unlock(&tmp->arch.mp_state_lock);
+	}
 	kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_SLEEP);
 
 	memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event));
@@ -229,7 +239,6 @@ static unsigned long kvm_psci_check_allowed_function(struct kvm_vcpu *vcpu, u32
 
 static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 {
-	struct kvm *kvm = vcpu->kvm;
 	u32 psci_fn = smccc_get_function(vcpu);
 	unsigned long val;
 	int ret = 1;
@@ -254,9 +263,7 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		kvm_psci_narrow_to_32bit(vcpu);
 		fallthrough;
 	case PSCI_0_2_FN64_CPU_ON:
-		mutex_lock(&kvm->lock);
 		val = kvm_psci_vcpu_on(vcpu);
-		mutex_unlock(&kvm->lock);
 		break;
 	case PSCI_0_2_FN_AFFINITY_INFO:
 		kvm_psci_narrow_to_32bit(vcpu);
@@ -395,7 +402,6 @@ static int kvm_psci_1_x_call(struct kvm_vcpu *vcpu, u32 minor)
 
 static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 {
-	struct kvm *kvm = vcpu->kvm;
 	u32 psci_fn = smccc_get_function(vcpu);
 	unsigned long val;
 
@@ -405,9 +411,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 		val = PSCI_RET_SUCCESS;
 		break;
 	case KVM_PSCI_FN_CPU_ON:
-		mutex_lock(&kvm->lock);
 		val = kvm_psci_vcpu_on(vcpu);
-		mutex_unlock(&kvm->lock);
 		break;
 	default:
 		val = PSCI_RET_NOT_SUPPORTED;
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/reset.c linux-libre-6.1.56-gnu/arch/arm64/kvm/reset.c
index 5ae18472205a..f9d070473614 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/reset.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/reset.c
@@ -200,7 +200,7 @@ static int kvm_set_vm_width(struct kvm_vcpu *vcpu)
 
 	is32bit = vcpu_has_feature(vcpu, KVM_ARM_VCPU_EL1_32BIT);
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.config_lock);
 
 	if (test_bit(KVM_ARCH_FLAG_REG_WIDTH_CONFIGURED, &kvm->arch.flags)) {
 		/*
@@ -253,17 +253,18 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	bool loaded;
 	u32 pstate;
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.config_lock);
 	ret = kvm_set_vm_width(vcpu);
-	if (!ret) {
-		reset_state = vcpu->arch.reset_state;
-		WRITE_ONCE(vcpu->arch.reset_state.reset, false);
-	}
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
 
 	if (ret)
 		return ret;
 
+	spin_lock(&vcpu->arch.mp_state_lock);
+	reset_state = vcpu->arch.reset_state;
+	vcpu->arch.reset_state.reset = false;
+	spin_unlock(&vcpu->arch.mp_state_lock);
+
 	/* Reset PMU outside of the non-preemptible section */
 	kvm_pmu_vcpu_reset(vcpu);
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/sys_regs.c linux-libre-6.1.56-gnu/arch/arm64/kvm/sys_regs.c
index f4a7c5abcbca..457e74f1f671 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/sys_regs.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/sys_regs.c
@@ -697,15 +697,16 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		return false;
 
 	if (p->is_write) {
-		/* Only update writeable bits of PMCR */
+		/*
+		 * Only update writeable bits of PMCR (continuing into
+		 * kvm_pmu_handle_pmcr() as well)
+		 */
 		val = __vcpu_sys_reg(vcpu, PMCR_EL0);
 		val &= ~ARMV8_PMU_PMCR_MASK;
 		val |= p->regval & ARMV8_PMU_PMCR_MASK;
 		if (!kvm_supports_32bit_el0())
 			val |= ARMV8_PMU_PMCR_LC;
-		__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
 		kvm_pmu_handle_pmcr(vcpu, val);
-		kvm_vcpu_pmu_restore_guest(vcpu);
 	} else {
 		/* PMCR.P & PMCR.C are RAZ */
 		val = __vcpu_sys_reg(vcpu, PMCR_EL0)
@@ -767,6 +768,22 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
 	return true;
 }
 
+static int get_pmu_evcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 *val)
+{
+	u64 idx;
+
+	if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 0)
+		/* PMCCNTR_EL0 */
+		idx = ARMV8_PMU_CYCLE_IDX;
+	else
+		/* PMEVCNTRn_EL0 */
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+
+	*val = kvm_pmu_get_counter_value(vcpu, idx);
+	return 0;
+}
+
 static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
 			      struct sys_reg_params *p,
 			      const struct sys_reg_desc *r)
@@ -983,7 +1000,7 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 /* Macro to expand the PMEVCNTRn_EL0 register */
 #define PMU_PMEVCNTR_EL0(n)						\
 	{ PMU_SYS_REG(SYS_PMEVCNTRn_EL0(n)),				\
-	  .reset = reset_pmevcntr,					\
+	  .reset = reset_pmevcntr, .get_user = get_pmu_evcntr,		\
 	  .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), }
 
 /* Macro to expand the PMEVTYPERn_EL0 register */
@@ -1632,7 +1649,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ PMU_SYS_REG(SYS_PMCEID1_EL0),
 	  .access = access_pmceid, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMCCNTR_EL0),
-	  .access = access_pmu_evcntr, .reset = reset_unknown, .reg = PMCCNTR_EL0 },
+	  .access = access_pmu_evcntr, .reset = reset_unknown,
+	  .reg = PMCCNTR_EL0, .get_user = get_pmu_evcntr},
 	{ PMU_SYS_REG(SYS_PMXEVTYPER_EL0),
 	  .access = access_pmu_evtyper, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMXEVCNTR_EL0),
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-debug.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-debug.c
index 78cde687383c..07aa0437125a 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-debug.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-debug.c
@@ -85,7 +85,7 @@ static void *vgic_debug_start(struct seq_file *s, loff_t *pos)
 	struct kvm *kvm = s->private;
 	struct vgic_state_iter *iter;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
 	iter = kvm->arch.vgic.iter;
 	if (iter) {
 		iter = ERR_PTR(-EBUSY);
@@ -104,7 +104,7 @@ static void *vgic_debug_start(struct seq_file *s, loff_t *pos)
 	if (end_of_vgic(iter))
 		iter = NULL;
 out:
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
 	return iter;
 }
 
@@ -132,12 +132,12 @@ static void vgic_debug_stop(struct seq_file *s, void *v)
 	if (IS_ERR(v))
 		return;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
 	iter = kvm->arch.vgic.iter;
 	kfree(iter->lpi_array);
 	kfree(iter);
 	kvm->arch.vgic.iter = NULL;
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
 }
 
 static void print_dist_state(struct seq_file *s, struct vgic_dist *dist)
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-init.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-init.c
index f6d4f4052555..f2f3bf4a04b0 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-init.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-init.c
@@ -74,9 +74,6 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 	unsigned long i;
 	int ret;
 
-	if (irqchip_in_kernel(kvm))
-		return -EEXIST;
-
 	/*
 	 * This function is also called by the KVM_CREATE_IRQCHIP handler,
 	 * which had no chance yet to check the availability of the GICv2
@@ -87,10 +84,20 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 		!kvm_vgic_global_state.can_emulate_gicv2)
 		return -ENODEV;
 
+	/* Must be held to avoid race with vCPU creation */
+	lockdep_assert_held(&kvm->lock);
+
 	ret = -EBUSY;
 	if (!lock_all_vcpus(kvm))
 		return ret;
 
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (irqchip_in_kernel(kvm)) {
+		ret = -EEXIST;
+		goto out_unlock;
+	}
+
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		if (vcpu_has_run_once(vcpu))
 			goto out_unlock;
@@ -118,6 +125,7 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 		INIT_LIST_HEAD(&kvm->arch.vgic.rd_regions);
 
 out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
 	unlock_all_vcpus(kvm);
 	return ret;
 }
@@ -227,9 +235,9 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 	 * KVM io device for the redistributor that belongs to this VCPU.
 	 */
 	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
-		mutex_lock(&vcpu->kvm->lock);
+		mutex_lock(&vcpu->kvm->slots_lock);
 		ret = vgic_register_redist_iodev(vcpu);
-		mutex_unlock(&vcpu->kvm->lock);
+		mutex_unlock(&vcpu->kvm->slots_lock);
 	}
 	return ret;
 }
@@ -250,7 +258,6 @@ static void kvm_vgic_vcpu_enable(struct kvm_vcpu *vcpu)
  * The function is generally called when nr_spis has been explicitly set
  * by the guest through the KVM DEVICE API. If not nr_spis is set to 256.
  * vgic_initialized() returns true when this function has succeeded.
- * Must be called with kvm->lock held!
  */
 int vgic_init(struct kvm *kvm)
 {
@@ -259,6 +266,8 @@ int vgic_init(struct kvm *kvm)
 	int ret = 0, i;
 	unsigned long idx;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	if (vgic_initialized(kvm))
 		return 0;
 
@@ -373,12 +382,13 @@ void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
 	vgic_cpu->rd_iodev.base_addr = VGIC_ADDR_UNDEF;
 }
 
-/* To be called with kvm->lock held */
 static void __kvm_vgic_destroy(struct kvm *kvm)
 {
 	struct kvm_vcpu *vcpu;
 	unsigned long i;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	vgic_debug_destroy(kvm);
 
 	kvm_for_each_vcpu(i, vcpu, kvm)
@@ -389,9 +399,9 @@ static void __kvm_vgic_destroy(struct kvm *kvm)
 
 void kvm_vgic_destroy(struct kvm *kvm)
 {
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
 	__kvm_vgic_destroy(kvm);
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
 }
 
 /**
@@ -414,9 +424,9 @@ int vgic_lazy_init(struct kvm *kvm)
 		if (kvm->arch.vgic.vgic_model != KVM_DEV_TYPE_ARM_VGIC_V2)
 			return -EBUSY;
 
-		mutex_lock(&kvm->lock);
+		mutex_lock(&kvm->arch.config_lock);
 		ret = vgic_init(kvm);
-		mutex_unlock(&kvm->lock);
+		mutex_unlock(&kvm->arch.config_lock);
 	}
 
 	return ret;
@@ -436,30 +446,48 @@ int vgic_lazy_init(struct kvm *kvm)
 int kvm_vgic_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	enum vgic_type type;
+	gpa_t dist_base;
 	int ret = 0;
 
 	if (likely(vgic_ready(kvm)))
 		return 0;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->slots_lock);
+	mutex_lock(&kvm->arch.config_lock);
 	if (vgic_ready(kvm))
 		goto out;
 
 	if (!irqchip_in_kernel(kvm))
 		goto out;
 
-	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2) {
 		ret = vgic_v2_map_resources(kvm);
-	else
+		type = VGIC_V2;
+	} else {
 		ret = vgic_v3_map_resources(kvm);
+		type = VGIC_V3;
+	}
 
-	if (ret)
+	if (ret) {
 		__kvm_vgic_destroy(kvm);
-	else
-		dist->ready = true;
+		goto out;
+	}
+	dist->ready = true;
+	dist_base = dist->vgic_dist_base;
+	mutex_unlock(&kvm->arch.config_lock);
+
+	ret = vgic_register_dist_iodev(kvm, dist_base, type);
+	if (ret) {
+		kvm_err("Unable to register VGIC dist MMIO regions\n");
+		kvm_vgic_destroy(kvm);
+	}
+	mutex_unlock(&kvm->slots_lock);
+	return ret;
 
 out:
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return ret;
 }
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-its.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-its.c
index 733b53055f97..00ad6587bee9 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-its.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-its.c
@@ -1936,6 +1936,7 @@ void vgic_lpi_translation_cache_destroy(struct kvm *kvm)
 
 static int vgic_its_create(struct kvm_device *dev, u32 type)
 {
+	int ret;
 	struct vgic_its *its;
 
 	if (type != KVM_DEV_TYPE_ARM_VGIC_ITS)
@@ -1945,9 +1946,12 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
 	if (!its)
 		return -ENOMEM;
 
+	mutex_lock(&dev->kvm->arch.config_lock);
+
 	if (vgic_initialized(dev->kvm)) {
-		int ret = vgic_v4_init(dev->kvm);
+		ret = vgic_v4_init(dev->kvm);
 		if (ret < 0) {
+			mutex_unlock(&dev->kvm->arch.config_lock);
 			kfree(its);
 			return ret;
 		}
@@ -1958,6 +1962,14 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
 	mutex_init(&its->its_lock);
 	mutex_init(&its->cmd_lock);
 
+	/* Yep, even more trickery for lock ordering... */
+#ifdef CONFIG_LOCKDEP
+	mutex_lock(&its->cmd_lock);
+	mutex_lock(&its->its_lock);
+	mutex_unlock(&its->its_lock);
+	mutex_unlock(&its->cmd_lock);
+#endif
+
 	its->vgic_its_base = VGIC_ADDR_UNDEF;
 
 	INIT_LIST_HEAD(&its->device_list);
@@ -1976,7 +1988,11 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
 
 	dev->private = its;
 
-	return vgic_its_set_abi(its, NR_ITS_ABIS - 1);
+	ret = vgic_its_set_abi(its, NR_ITS_ABIS - 1);
+
+	mutex_unlock(&dev->kvm->arch.config_lock);
+
+	return ret;
 }
 
 static void vgic_its_destroy(struct kvm_device *kvm_dev)
@@ -2045,6 +2061,13 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
+	if (!lock_all_vcpus(dev->kvm)) {
+		mutex_unlock(&dev->kvm->lock);
+		return -EBUSY;
+	}
+
+	mutex_lock(&dev->kvm->arch.config_lock);
+
 	if (IS_VGIC_ADDR_UNDEF(its->vgic_its_base)) {
 		ret = -ENXIO;
 		goto out;
@@ -2058,11 +2081,6 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 		goto out;
 	}
 
-	if (!lock_all_vcpus(dev->kvm)) {
-		ret = -EBUSY;
-		goto out;
-	}
-
 	addr = its->vgic_its_base + offset;
 
 	len = region->access_flags & VGIC_ACCESS_64bit ? 8 : 4;
@@ -2076,8 +2094,9 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 	} else {
 		*reg = region->its_read(dev->kvm, its, addr, len);
 	}
-	unlock_all_vcpus(dev->kvm);
 out:
+	mutex_unlock(&dev->kvm->arch.config_lock);
+	unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 	return ret;
 }
@@ -2749,14 +2768,15 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
 		return 0;
 
 	mutex_lock(&kvm->lock);
-	mutex_lock(&its->its_lock);
 
 	if (!lock_all_vcpus(kvm)) {
-		mutex_unlock(&its->its_lock);
 		mutex_unlock(&kvm->lock);
 		return -EBUSY;
 	}
 
+	mutex_lock(&kvm->arch.config_lock);
+	mutex_lock(&its->its_lock);
+
 	switch (attr) {
 	case KVM_DEV_ARM_ITS_CTRL_RESET:
 		vgic_its_reset(kvm, its);
@@ -2769,8 +2789,9 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
 		break;
 	}
 
-	unlock_all_vcpus(kvm);
 	mutex_unlock(&its->its_lock);
+	mutex_unlock(&kvm->arch.config_lock);
+	unlock_all_vcpus(kvm);
 	mutex_unlock(&kvm->lock);
 	return ret;
 }
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
index edeac2380591..bf4b3d9631ce 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -46,7 +46,7 @@ int kvm_set_legacy_vgic_v2_addr(struct kvm *kvm, struct kvm_arm_device_addr *dev
 	struct vgic_dist *vgic = &kvm->arch.vgic;
 	int r;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
 	switch (FIELD_GET(KVM_ARM_DEVICE_TYPE_MASK, dev_addr->id)) {
 	case KVM_VGIC_V2_ADDR_TYPE_DIST:
 		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
@@ -68,7 +68,7 @@ int kvm_set_legacy_vgic_v2_addr(struct kvm *kvm, struct kvm_arm_device_addr *dev
 		r = -ENODEV;
 	}
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.config_lock);
 
 	return r;
 }
@@ -102,7 +102,11 @@ static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool wri
 		if (get_user(addr, uaddr))
 			return -EFAULT;
 
-	mutex_lock(&kvm->lock);
+	/*
+	 * Since we can't hold config_lock while registering the redistributor
+	 * iodevs, take the slots_lock immediately.
+	 */
+	mutex_lock(&kvm->slots_lock);
 	switch (attr->attr) {
 	case KVM_VGIC_V2_ADDR_TYPE_DIST:
 		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
@@ -182,6 +186,7 @@ static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool wri
 	if (r)
 		goto out;
 
+	mutex_lock(&kvm->arch.config_lock);
 	if (write) {
 		r = vgic_check_iorange(kvm, *addr_ptr, addr, alignment, size);
 		if (!r)
@@ -189,9 +194,10 @@ static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool wri
 	} else {
 		addr = *addr_ptr;
 	}
+	mutex_unlock(&kvm->arch.config_lock);
 
 out:
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->slots_lock);
 
 	if (!r && !write)
 		r =  put_user(addr, uaddr);
@@ -227,7 +233,7 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 		    (val & 31))
 			return -EINVAL;
 
-		mutex_lock(&dev->kvm->lock);
+		mutex_lock(&dev->kvm->arch.config_lock);
 
 		if (vgic_ready(dev->kvm) || dev->kvm->arch.vgic.nr_spis)
 			ret = -EBUSY;
@@ -235,16 +241,16 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 			dev->kvm->arch.vgic.nr_spis =
 				val - VGIC_NR_PRIVATE_IRQS;
 
-		mutex_unlock(&dev->kvm->lock);
+		mutex_unlock(&dev->kvm->arch.config_lock);
 
 		return ret;
 	}
 	case KVM_DEV_ARM_VGIC_GRP_CTRL: {
 		switch (attr->attr) {
 		case KVM_DEV_ARM_VGIC_CTRL_INIT:
-			mutex_lock(&dev->kvm->lock);
+			mutex_lock(&dev->kvm->arch.config_lock);
 			r = vgic_init(dev->kvm);
-			mutex_unlock(&dev->kvm->lock);
+			mutex_unlock(&dev->kvm->arch.config_lock);
 			return r;
 		case KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES:
 			/*
@@ -260,7 +266,10 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 				mutex_unlock(&dev->kvm->lock);
 				return -EBUSY;
 			}
+
+			mutex_lock(&dev->kvm->arch.config_lock);
 			r = vgic_v3_save_pending_tables(dev->kvm);
+			mutex_unlock(&dev->kvm->arch.config_lock);
 			unlock_all_vcpus(dev->kvm);
 			mutex_unlock(&dev->kvm->lock);
 			return r;
@@ -411,15 +420,17 @@ static int vgic_v2_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
+	if (!lock_all_vcpus(dev->kvm)) {
+		mutex_unlock(&dev->kvm->lock);
+		return -EBUSY;
+	}
+
+	mutex_lock(&dev->kvm->arch.config_lock);
+
 	ret = vgic_init(dev->kvm);
 	if (ret)
 		goto out;
 
-	if (!lock_all_vcpus(dev->kvm)) {
-		ret = -EBUSY;
-		goto out;
-	}
-
 	switch (attr->group) {
 	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
 		ret = vgic_v2_cpuif_uaccess(vcpu, is_write, addr, &val);
@@ -432,8 +443,9 @@ static int vgic_v2_attr_regs_access(struct kvm_device *dev,
 		break;
 	}
 
-	unlock_all_vcpus(dev->kvm);
 out:
+	mutex_unlock(&dev->kvm->arch.config_lock);
+	unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 
 	if (!ret && !is_write)
@@ -569,12 +581,14 @@ static int vgic_v3_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (unlikely(!vgic_initialized(dev->kvm))) {
-		ret = -EBUSY;
-		goto out;
+	if (!lock_all_vcpus(dev->kvm)) {
+		mutex_unlock(&dev->kvm->lock);
+		return -EBUSY;
 	}
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	mutex_lock(&dev->kvm->arch.config_lock);
+
+	if (unlikely(!vgic_initialized(dev->kvm))) {
 		ret = -EBUSY;
 		goto out;
 	}
@@ -609,8 +623,9 @@ static int vgic_v3_attr_regs_access(struct kvm_device *dev,
 		break;
 	}
 
-	unlock_all_vcpus(dev->kvm);
 out:
+	mutex_unlock(&dev->kvm->arch.config_lock);
+	unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 
 	if (!ret && uaccess && !is_write) {
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index 91201f743033..188d2187eede 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -111,7 +111,7 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 	case GICD_CTLR: {
 		bool was_enabled, is_hwsgi;
 
-		mutex_lock(&vcpu->kvm->lock);
+		mutex_lock(&vcpu->kvm->arch.config_lock);
 
 		was_enabled = dist->enabled;
 		is_hwsgi = dist->nassgireq;
@@ -139,7 +139,7 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		else if (!was_enabled && dist->enabled)
 			vgic_kick_vcpus(vcpu->kvm);
 
-		mutex_unlock(&vcpu->kvm->lock);
+		mutex_unlock(&vcpu->kvm->arch.config_lock);
 		break;
 	}
 	case GICD_TYPER:
@@ -769,10 +769,13 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
 	struct vgic_io_device *rd_dev = &vcpu->arch.vgic_cpu.rd_iodev;
 	struct vgic_redist_region *rdreg;
 	gpa_t rd_base;
-	int ret;
+	int ret = 0;
+
+	lockdep_assert_held(&kvm->slots_lock);
+	mutex_lock(&kvm->arch.config_lock);
 
 	if (!IS_VGIC_ADDR_UNDEF(vgic_cpu->rd_iodev.base_addr))
-		return 0;
+		goto out_unlock;
 
 	/*
 	 * We may be creating VCPUs before having set the base address for the
@@ -782,10 +785,12 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
 	 */
 	rdreg = vgic_v3_rdist_free_slot(&vgic->rd_regions);
 	if (!rdreg)
-		return 0;
+		goto out_unlock;
 
-	if (!vgic_v3_check_base(kvm))
-		return -EINVAL;
+	if (!vgic_v3_check_base(kvm)) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
 
 	vgic_cpu->rdreg = rdreg;
 	vgic_cpu->rdreg_index = rdreg->free_index;
@@ -799,16 +804,20 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
 	rd_dev->nr_regions = ARRAY_SIZE(vgic_v3_rd_registers);
 	rd_dev->redist_vcpu = vcpu;
 
-	mutex_lock(&kvm->slots_lock);
+	mutex_unlock(&kvm->arch.config_lock);
+
 	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, rd_base,
 				      2 * SZ_64K, &rd_dev->dev);
-	mutex_unlock(&kvm->slots_lock);
-
 	if (ret)
 		return ret;
 
+	/* Protected by slots_lock */
 	rdreg->free_index++;
 	return 0;
+
+out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
+	return ret;
 }
 
 static void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu)
@@ -834,12 +843,10 @@ static int vgic_register_all_redist_iodevs(struct kvm *kvm)
 		/* The current c failed, so iterate over the previous ones. */
 		int i;
 
-		mutex_lock(&kvm->slots_lock);
 		for (i = 0; i < c; i++) {
 			vcpu = kvm_get_vcpu(kvm, i);
 			vgic_unregister_redist_iodev(vcpu);
 		}
-		mutex_unlock(&kvm->slots_lock);
 	}
 
 	return ret;
@@ -938,7 +945,9 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
 {
 	int ret;
 
+	mutex_lock(&kvm->arch.config_lock);
 	ret = vgic_v3_alloc_redist_region(kvm, index, addr, count);
+	mutex_unlock(&kvm->arch.config_lock);
 	if (ret)
 		return ret;
 
@@ -950,8 +959,10 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
 	if (ret) {
 		struct vgic_redist_region *rdreg;
 
+		mutex_lock(&kvm->arch.config_lock);
 		rdreg = vgic_v3_rdist_region_from_index(kvm, index);
 		vgic_v3_free_redist_region(rdreg);
+		mutex_unlock(&kvm->arch.config_lock);
 		return ret;
 	}
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-mmio.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-mmio.c
index b32d434c1d4a..eb5c58d785b9 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-mmio.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -527,13 +527,13 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	u32 val;
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.config_lock);
 	vgic_access_active_prepare(vcpu, intid);
 
 	val = __vgic_mmio_read_active(vcpu, addr, len);
 
 	vgic_access_active_finish(vcpu, intid);
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
 
 	return val;
 }
@@ -622,13 +622,13 @@ void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.config_lock);
 	vgic_access_active_prepare(vcpu, intid);
 
 	__vgic_mmio_write_cactive(vcpu, addr, len, val);
 
 	vgic_access_active_finish(vcpu, intid);
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
 }
 
 int vgic_mmio_uaccess_write_cactive(struct kvm_vcpu *vcpu,
@@ -659,13 +659,13 @@ void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.config_lock);
 	vgic_access_active_prepare(vcpu, intid);
 
 	__vgic_mmio_write_sactive(vcpu, addr, len, val);
 
 	vgic_access_active_finish(vcpu, intid);
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
 }
 
 int vgic_mmio_uaccess_write_sactive(struct kvm_vcpu *vcpu,
@@ -1093,7 +1093,6 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 			     enum vgic_type type)
 {
 	struct vgic_io_device *io_device = &kvm->arch.vgic.dist_iodev;
-	int ret = 0;
 	unsigned int len;
 
 	switch (type) {
@@ -1111,10 +1110,6 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 	io_device->iodev_type = IODEV_DIST;
 	io_device->redist_vcpu = NULL;
 
-	mutex_lock(&kvm->slots_lock);
-	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist_base_address,
-				      len, &io_device->dev);
-	mutex_unlock(&kvm->slots_lock);
-
-	return ret;
+	return kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist_base_address,
+				       len, &io_device->dev);
 }
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v2.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-v2.c
index 645648349c99..7e9cdb78f7ce 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v2.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-v2.c
@@ -312,12 +312,6 @@ int vgic_v2_map_resources(struct kvm *kvm)
 		return ret;
 	}
 
-	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V2);
-	if (ret) {
-		kvm_err("Unable to register VGIC MMIO regions\n");
-		return ret;
-	}
-
 	if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
 					    kvm_vgic_global_state.vcpu_base,
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v3.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-v3.c
index 826ff6f2a4e7..1f8eea53e982 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v3.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-v3.c
@@ -350,26 +350,23 @@ retry:
  * The deactivation of the doorbell interrupt will trigger the
  * unmapping of the associated vPE.
  */
-static void unmap_all_vpes(struct vgic_dist *dist)
+static void unmap_all_vpes(struct kvm *kvm)
 {
-	struct irq_desc *desc;
+	struct vgic_dist *dist = &kvm->arch.vgic;
 	int i;
 
-	for (i = 0; i < dist->its_vm.nr_vpes; i++) {
-		desc = irq_to_desc(dist->its_vm.vpes[i]->irq);
-		irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
-	}
+	for (i = 0; i < dist->its_vm.nr_vpes; i++)
+		free_irq(dist->its_vm.vpes[i]->irq, kvm_get_vcpu(kvm, i));
 }
 
-static void map_all_vpes(struct vgic_dist *dist)
+static void map_all_vpes(struct kvm *kvm)
 {
-	struct irq_desc *desc;
+	struct vgic_dist *dist = &kvm->arch.vgic;
 	int i;
 
-	for (i = 0; i < dist->its_vm.nr_vpes; i++) {
-		desc = irq_to_desc(dist->its_vm.vpes[i]->irq);
-		irq_domain_activate_irq(irq_desc_get_irq_data(desc), false);
-	}
+	for (i = 0; i < dist->its_vm.nr_vpes; i++)
+		WARN_ON(vgic_v4_request_vpe_irq(kvm_get_vcpu(kvm, i),
+						dist->its_vm.vpes[i]->irq));
 }
 
 /**
@@ -394,7 +391,7 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
 	 * and enabling of the doorbells have already been done.
 	 */
 	if (kvm_vgic_global_state.has_gicv4_1) {
-		unmap_all_vpes(dist);
+		unmap_all_vpes(kvm);
 		vlpi_avail = true;
 	}
 
@@ -444,7 +441,7 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
 
 out:
 	if (vlpi_avail)
-		map_all_vpes(dist);
+		map_all_vpes(kvm);
 
 	return ret;
 }
@@ -541,7 +538,6 @@ int vgic_v3_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
-	int ret = 0;
 	unsigned long c;
 
 	kvm_for_each_vcpu(c, vcpu, kvm) {
@@ -571,12 +567,6 @@ int vgic_v3_map_resources(struct kvm *kvm)
 		return -EBUSY;
 	}
 
-	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3);
-	if (ret) {
-		kvm_err("Unable to register VGICv3 dist MMIO regions\n");
-		return ret;
-	}
-
 	if (kvm_vgic_global_state.has_gicv4_1)
 		vgic_v4_configure_vsgis(kvm);
 
@@ -752,7 +742,7 @@ void vgic_v3_put(struct kvm_vcpu *vcpu)
 {
 	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
 
-	WARN_ON(vgic_v4_put(vcpu, false));
+	WARN_ON(vgic_v4_put(vcpu));
 
 	vgic_v3_vmcr_sync(vcpu);
 
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v4.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-v4.c
index ad06ba6c9b00..339a55194b2c 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic-v4.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic-v4.c
@@ -184,13 +184,14 @@ static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
 	}
 }
 
-/* Must be called with the kvm lock held */
 void vgic_v4_configure_vsgis(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
 	unsigned long i;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	kvm_arm_halt_guest(kvm);
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
@@ -222,14 +223,18 @@ void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val)
 	*val = !!(*ptr & mask);
 }
 
+int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq)
+{
+	return request_irq(irq, vgic_v4_doorbell_handler, 0, "vcpu", vcpu);
+}
+
 /**
  * vgic_v4_init - Initialize the GICv4 data structures
  * @kvm:	Pointer to the VM being initialized
  *
  * We may be called each time a vITS is created, or when the
- * vgic is initialized. This relies on kvm->lock to be
- * held. In both cases, the number of vcpus should now be
- * fixed.
+ * vgic is initialized. In both cases, the number of vcpus
+ * should now be fixed.
  */
 int vgic_v4_init(struct kvm *kvm)
 {
@@ -238,6 +243,8 @@ int vgic_v4_init(struct kvm *kvm)
 	int nr_vcpus, ret;
 	unsigned long i;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	if (!kvm_vgic_global_state.has_gicv4)
 		return 0; /* Nothing to see here... move along. */
 
@@ -283,8 +290,7 @@ int vgic_v4_init(struct kvm *kvm)
 			irq_flags &= ~IRQ_NOAUTOEN;
 		irq_set_status_flags(irq, irq_flags);
 
-		ret = request_irq(irq, vgic_v4_doorbell_handler,
-				  0, "vcpu", vcpu);
+		ret = vgic_v4_request_vpe_irq(vcpu, irq);
 		if (ret) {
 			kvm_err("failed to allocate vcpu IRQ%d\n", irq);
 			/*
@@ -305,14 +311,14 @@ int vgic_v4_init(struct kvm *kvm)
 /**
  * vgic_v4_teardown - Free the GICv4 data structures
  * @kvm:	Pointer to the VM being destroyed
- *
- * Relies on kvm->lock to be held.
  */
 void vgic_v4_teardown(struct kvm *kvm)
 {
 	struct its_vm *its_vm = &kvm->arch.vgic.its_vm;
 	int i;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	if (!its_vm->vpes)
 		return;
 
@@ -330,14 +336,14 @@ void vgic_v4_teardown(struct kvm *kvm)
 	its_vm->vpes = NULL;
 }
 
-int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db)
+int vgic_v4_put(struct kvm_vcpu *vcpu)
 {
 	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
 
 	if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
 		return 0;
 
-	return its_make_vpe_non_resident(vpe, need_db);
+	return its_make_vpe_non_resident(vpe, !!vcpu_get_flag(vcpu, IN_WFI));
 }
 
 int vgic_v4_load(struct kvm_vcpu *vcpu)
@@ -348,6 +354,9 @@ int vgic_v4_load(struct kvm_vcpu *vcpu)
 	if (!vgic_supports_direct_msis(vcpu->kvm) || vpe->resident)
 		return 0;
 
+	if (vcpu_get_flag(vcpu, IN_WFI))
+		return 0;
+
 	/*
 	 * Before making the VPE resident, make sure the redistributor
 	 * corresponding to our current CPU expects us here. See the
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic.c linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic.c
index d97e6080b421..0a005da83ae6 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic.c
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic.c
@@ -24,11 +24,13 @@ struct vgic_global kvm_vgic_global_state __ro_after_init = {
 /*
  * Locking order is always:
  * kvm->lock (mutex)
- *   its->cmd_lock (mutex)
- *     its->its_lock (mutex)
- *       vgic_cpu->ap_list_lock		must be taken with IRQs disabled
- *         kvm->lpi_list_lock		must be taken with IRQs disabled
- *           vgic_irq->irq_lock		must be taken with IRQs disabled
+ *   vcpu->mutex (mutex)
+ *     kvm->arch.config_lock (mutex)
+ *       its->cmd_lock (mutex)
+ *         its->its_lock (mutex)
+ *           vgic_cpu->ap_list_lock		must be taken with IRQs disabled
+ *             kvm->lpi_list_lock		must be taken with IRQs disabled
+ *               vgic_irq->irq_lock		must be taken with IRQs disabled
  *
  * As the ap_list_lock might be taken from the timer interrupt handler,
  * we have to disable IRQs before taking this lock and everything lower
diff --git linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic.h linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic.h
index 0c8da72953f0..23e280fa0a16 100644
--- linux-libre-6.1-gnu/arch/arm64/kvm/vgic/vgic.h
+++ linux-libre-6.1.56-gnu/arch/arm64/kvm/vgic/vgic.h
@@ -331,5 +331,6 @@ int vgic_v4_init(struct kvm *kvm);
 void vgic_v4_teardown(struct kvm *kvm);
 void vgic_v4_configure_vsgis(struct kvm *kvm);
 void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val);
+int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq);
 
 #endif
diff --git linux-libre-6.1-gnu/arch/arm64/lib/csum.c linux-libre-6.1.56-gnu/arch/arm64/lib/csum.c
index 78b87a64ca0a..2432683e48a6 100644
--- linux-libre-6.1-gnu/arch/arm64/lib/csum.c
+++ linux-libre-6.1.56-gnu/arch/arm64/lib/csum.c
@@ -24,7 +24,7 @@ unsigned int __no_sanitize_address do_csum(const unsigned char *buff, int len)
 	const u64 *ptr;
 	u64 data, sum64 = 0;
 
-	if (unlikely(len == 0))
+	if (unlikely(len <= 0))
 		return 0;
 
 	offset = (unsigned long)buff & 7;
diff --git linux-libre-6.1-gnu/arch/arm64/mm/copypage.c linux-libre-6.1.56-gnu/arch/arm64/mm/copypage.c
index 24913271e898..f2fa8a0776e2 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/copypage.c
+++ linux-libre-6.1.56-gnu/arch/arm64/mm/copypage.c
@@ -21,9 +21,12 @@ void copy_highpage(struct page *to, struct page *from)
 
 	copy_page(kto, kfrom);
 
-	if (system_supports_mte() && test_bit(PG_mte_tagged, &from->flags)) {
-		set_bit(PG_mte_tagged, &to->flags);
+	if (kasan_hw_tags_enabled())
+		page_kasan_tag_reset(to);
+
+	if (system_supports_mte() && page_mte_tagged(from)) {
 		mte_copy_page_tags(kto, kfrom);
+		set_page_mte_tagged(to);
 	}
 }
 EXPORT_SYMBOL(copy_highpage);
diff --git linux-libre-6.1-gnu/arch/arm64/mm/fault.c linux-libre-6.1.56-gnu/arch/arm64/mm/fault.c
index 5b391490e045..6b6b8a82f294 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/arm64/mm/fault.c
@@ -30,6 +30,7 @@
 #include <asm/bug.h>
 #include <asm/cmpxchg.h>
 #include <asm/cpufeature.h>
+#include <asm/efi.h>
 #include <asm/exception.h>
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
@@ -353,6 +354,11 @@ static bool is_el1_mte_sync_tag_check_fault(unsigned long esr)
 	return false;
 }
 
+static bool is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
 static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 			      struct pt_regs *regs)
 {
@@ -385,12 +391,16 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 	} else if (addr < PAGE_SIZE) {
 		msg = "NULL pointer dereference";
 	} else {
-		if (kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
+		if (is_translation_fault(esr) &&
+		    kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
 			return;
 
 		msg = "paging request";
 	}
 
+	if (efi_runtime_fixup_exception(regs, msg))
+		return;
+
 	die_kernel_fault(msg, addr, esr, regs);
 }
 
@@ -470,30 +480,17 @@ static void do_bad_area(unsigned long far, unsigned long esr,
 	}
 }
 
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
+#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
 
-static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr,
+static vm_fault_t __do_page_fault(struct mm_struct *mm,
+				  struct vm_area_struct *vma, unsigned long addr,
 				  unsigned int mm_flags, unsigned long vm_flags,
 				  struct pt_regs *regs)
 {
-	struct vm_area_struct *vma = find_vma(mm, addr);
-
-	if (unlikely(!vma))
-		return VM_FAULT_BADMAP;
-
 	/*
 	 * Ok, we have a good vm_area for this memory access, so we can handle
 	 * it.
-	 */
-	if (unlikely(vma->vm_start > addr)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN))
-			return VM_FAULT_BADMAP;
-		if (expand_stack(vma, addr))
-			return VM_FAULT_BADMAP;
-	}
-
-	/*
 	 * Check that the permissions on the VMA allow for the fault which
 	 * occurred.
 	 */
@@ -525,6 +522,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 	unsigned long vm_flags;
 	unsigned int mm_flags = FAULT_FLAG_DEFAULT;
 	unsigned long addr = untagged_addr(far);
+	struct vm_area_struct *vma;
 
 	if (kprobe_page_fault(regs, esr))
 		return 0;
@@ -575,31 +573,14 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
-	/*
-	 * As per x86, we may deadlock here. However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
-	 */
-	if (!mmap_read_trylock(mm)) {
-		if (!user_mode(regs) && !search_exception_tables(regs->pc))
-			goto no_context;
 retry:
-		mmap_read_lock(mm);
-	} else {
-		/*
-		 * The above mmap_read_trylock() might have succeeded in which
-		 * case, we'll have missed the might_sleep() from down_read().
-		 */
-		might_sleep();
-#ifdef CONFIG_DEBUG_VM
-		if (!user_mode(regs) && !search_exception_tables(regs->pc)) {
-			mmap_read_unlock(mm);
-			goto no_context;
-		}
-#endif
+	vma = lock_mm_and_find_vma(mm, addr, regs);
+	if (unlikely(!vma)) {
+		fault = VM_FAULT_BADMAP;
+		goto done;
 	}
 
-	fault = __do_page_fault(mm, addr, mm_flags, vm_flags, regs);
+	fault = __do_page_fault(mm, vma, addr, mm_flags, vm_flags, regs);
 
 	/* Quick path to respond to signals */
 	if (fault_signal_pending(fault, regs)) {
@@ -618,6 +599,7 @@ retry:
 	}
 	mmap_read_unlock(mm);
 
+done:
 	/*
 	 * Handle the "normal" (no error) case first.
 	 */
@@ -934,5 +916,5 @@ struct page *alloc_zeroed_user_highpage_movable(struct vm_area_struct *vma,
 void tag_clear_highpage(struct page *page)
 {
 	mte_zero_clear_page_tags(page_address(page));
-	set_bit(PG_mte_tagged, &page->flags);
+	set_page_mte_tagged(page);
 }
diff --git linux-libre-6.1-gnu/arch/arm64/mm/hugetlbpage.c linux-libre-6.1.56-gnu/arch/arm64/mm/hugetlbpage.c
index 35e9a468d13e..134dcf6bc650 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/hugetlbpage.c
+++ linux-libre-6.1.56-gnu/arch/arm64/mm/hugetlbpage.c
@@ -236,7 +236,7 @@ static void clear_flush(struct mm_struct *mm,
 	unsigned long i, saddr = addr;
 
 	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
-		pte_clear(mm, addr, ptep);
+		ptep_clear(mm, addr, ptep);
 
 	flush_tlb_range(&vma, saddr, addr);
 }
diff --git linux-libre-6.1-gnu/arch/arm64/mm/mteswap.c linux-libre-6.1.56-gnu/arch/arm64/mm/mteswap.c
index bed803d8e158..70f913205db9 100644
--- linux-libre-6.1-gnu/arch/arm64/mm/mteswap.c
+++ linux-libre-6.1.56-gnu/arch/arm64/mm/mteswap.c
@@ -24,7 +24,7 @@ int mte_save_tags(struct page *page)
 {
 	void *tag_storage, *ret;
 
-	if (!test_bit(PG_mte_tagged, &page->flags))
+	if (!page_mte_tagged(page))
 		return 0;
 
 	tag_storage = mte_allocate_tag_storage();
diff --git linux-libre-6.1-gnu/arch/arm64/net/bpf_jit.h linux-libre-6.1.56-gnu/arch/arm64/net/bpf_jit.h
index a6acb94ea3d6..c2edadb8ec6a 100644
--- linux-libre-6.1-gnu/arch/arm64/net/bpf_jit.h
+++ linux-libre-6.1.56-gnu/arch/arm64/net/bpf_jit.h
@@ -281,4 +281,8 @@
 /* DMB */
 #define A64_DMB_ISH aarch64_insn_gen_dmb(AARCH64_INSN_MB_ISH)
 
+/* ADR */
+#define A64_ADR(Rd, offset) \
+	aarch64_insn_gen_adr(0, offset, Rd, AARCH64_INSN_ADR_TYPE_ADR)
+
 #endif /* _BPF_JIT_H */
diff --git linux-libre-6.1-gnu/arch/arm64/net/bpf_jit_comp.c linux-libre-6.1.56-gnu/arch/arm64/net/bpf_jit_comp.c
index 30f76178608b..0ce5f13eabb1 100644
--- linux-libre-6.1-gnu/arch/arm64/net/bpf_jit_comp.c
+++ linux-libre-6.1.56-gnu/arch/arm64/net/bpf_jit_comp.c
@@ -322,7 +322,13 @@ static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf)
 	 *
 	 */
 
-	emit_bti(A64_BTI_C, ctx);
+	/* bpf function may be invoked by 3 instruction types:
+	 * 1. bl, attached via freplace to bpf prog via short jump
+	 * 2. br, attached via freplace to bpf prog via long jump
+	 * 3. blr, working as a function pointer, used by emit_call.
+	 * So BTI_JC should used here to support both br and blr.
+	 */
+	emit_bti(A64_BTI_JC, ctx);
 
 	emit(A64_MOV(1, A64_R(9), A64_LR), ctx);
 	emit(A64_NOP, ctx);
@@ -1649,13 +1655,8 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 	struct bpf_prog *p = l->link.prog;
 	int cookie_off = offsetof(struct bpf_tramp_run_ctx, bpf_cookie);
 
-	if (p->aux->sleepable) {
-		enter_prog = (u64)__bpf_prog_enter_sleepable;
-		exit_prog = (u64)__bpf_prog_exit_sleepable;
-	} else {
-		enter_prog = (u64)__bpf_prog_enter;
-		exit_prog = (u64)__bpf_prog_exit;
-	}
+	enter_prog = (u64)bpf_trampoline_enter(p);
+	exit_prog = (u64)bpf_trampoline_exit(p);
 
 	if (l->cookie == 0) {
 		/* if cookie is zero, one instruction is enough to store it */
@@ -1905,7 +1906,8 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 		restore_args(ctx, args_off, nargs);
 		/* call original func */
 		emit(A64_LDR64I(A64_R(10), A64_SP, retaddr_off), ctx);
-		emit(A64_BLR(A64_R(10)), ctx);
+		emit(A64_ADR(A64_LR, AARCH64_INSN_SIZE * 2), ctx);
+		emit(A64_RET(A64_R(10)), ctx);
 		/* store return value */
 		emit(A64_STR64I(A64_R(0), A64_SP, retval_off), ctx);
 		/* reserve a nop for bpf_tramp_image_put */
diff --git linux-libre-6.1-gnu/arch/arm64/tools/cpucaps linux-libre-6.1.56-gnu/arch/arm64/tools/cpucaps
index f1c0347ec31a..14d31d1b2ff0 100644
--- linux-libre-6.1-gnu/arch/arm64/tools/cpucaps
+++ linux-libre-6.1.56-gnu/arch/arm64/tools/cpucaps
@@ -71,6 +71,7 @@ WORKAROUND_2064142
 WORKAROUND_2077057
 WORKAROUND_2457168
 WORKAROUND_2658417
+WORKAROUND_AMPERE_AC03_CPU_38
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
diff --git linux-libre-6.1-gnu/arch/csky/Kconfig linux-libre-6.1.56-gnu/arch/csky/Kconfig
index adee6ab36862..742009123fd5 100644
--- linux-libre-6.1-gnu/arch/csky/Kconfig
+++ linux-libre-6.1.56-gnu/arch/csky/Kconfig
@@ -96,6 +96,7 @@ config CSKY
 	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
+	select LOCK_MM_AND_FIND_VMA
 	select MAY_HAVE_SPARSE_IRQ
 	select MODULES_USE_ELF_RELA if MODULES
 	select OF
diff --git linux-libre-6.1-gnu/arch/csky/mm/fault.c linux-libre-6.1.56-gnu/arch/csky/mm/fault.c
index e15f736cca4b..a885518ce1dd 100644
--- linux-libre-6.1-gnu/arch/csky/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/csky/mm/fault.c
@@ -97,13 +97,12 @@ static inline void mm_fault_error(struct pt_regs *regs, unsigned long addr, vm_f
 	BUG();
 }
 
-static inline void bad_area(struct pt_regs *regs, struct mm_struct *mm, int code, unsigned long addr)
+static inline void bad_area_nosemaphore(struct pt_regs *regs, struct mm_struct *mm, int code, unsigned long addr)
 {
 	/*
 	 * Something tried to access memory that isn't in our memory map.
 	 * Fix it, but check if it's kernel or user first.
 	 */
-	mmap_read_unlock(mm);
 	/* User mode accesses just cause a SIGSEGV */
 	if (user_mode(regs)) {
 		do_trap(regs, SIGSEGV, code, addr);
@@ -238,20 +237,9 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	if (is_write(regs))
 		flags |= FAULT_FLAG_WRITE;
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, addr);
+	vma = lock_mm_and_find_vma(mm, addr, regs);
 	if (unlikely(!vma)) {
-		bad_area(regs, mm, code, addr);
-		return;
-	}
-	if (likely(vma->vm_start <= addr))
-		goto good_area;
-	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
-		bad_area(regs, mm, code, addr);
-		return;
-	}
-	if (unlikely(expand_stack(vma, addr))) {
-		bad_area(regs, mm, code, addr);
+		bad_area_nosemaphore(regs, mm, code, addr);
 		return;
 	}
 
@@ -259,11 +247,11 @@ retry:
 	 * Ok, we have a good vm_area for this memory access, so
 	 * we can handle it.
 	 */
-good_area:
 	code = SEGV_ACCERR;
 
 	if (unlikely(access_error(regs, vma))) {
-		bad_area(regs, mm, code, addr);
+		mmap_read_unlock(mm);
+		bad_area_nosemaphore(regs, mm, code, addr);
 		return;
 	}
 
diff --git linux-libre-6.1-gnu/arch/hexagon/Kconfig linux-libre-6.1.56-gnu/arch/hexagon/Kconfig
index 54eadf265178..6726f4941015 100644
--- linux-libre-6.1-gnu/arch/hexagon/Kconfig
+++ linux-libre-6.1.56-gnu/arch/hexagon/Kconfig
@@ -28,6 +28,7 @@ config HEXAGON
 	select GENERIC_SMP_IDLE_THREAD
 	select STACKTRACE_SUPPORT
 	select GENERIC_CLOCKEVENTS_BROADCAST
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select GENERIC_CPU_DEVICES
 	select ARCH_WANT_LD_ORPHAN_WARN
diff --git linux-libre-6.1-gnu/arch/hexagon/mm/vm_fault.c linux-libre-6.1.56-gnu/arch/hexagon/mm/vm_fault.c
index f73c7cbfe326..583b08727166 100644
--- linux-libre-6.1-gnu/arch/hexagon/mm/vm_fault.c
+++ linux-libre-6.1.56-gnu/arch/hexagon/mm/vm_fault.c
@@ -57,21 +57,10 @@ void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
+	vma = lock_mm_and_find_vma(mm, address, regs);
+	if (unlikely(!vma))
+		goto bad_area_nosemaphore;
 
-	if (vma->vm_start <= address)
-		goto good_area;
-
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-good_area:
 	/* Address space is OK.  Now check access rights. */
 	si_code = SEGV_ACCERR;
 
@@ -140,6 +129,7 @@ good_area:
 bad_area:
 	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	if (user_mode(regs)) {
 		force_sig_fault(SIGSEGV, si_code, (void __user *)address);
 		return;
diff --git linux-libre-6.1-gnu/arch/ia64/Kconfig linux-libre-6.1.56-gnu/arch/ia64/Kconfig
index c6e06cdc738f..283b751cbf6a 100644
--- linux-libre-6.1-gnu/arch/ia64/Kconfig
+++ linux-libre-6.1.56-gnu/arch/ia64/Kconfig
@@ -9,6 +9,7 @@ menu "Processor type and features"
 config IA64
 	bool
 	select ARCH_BINFMT_ELF_EXTRA_PHDRS
+	select ARCH_HAS_CPU_FINALIZE_INIT
 	select ARCH_HAS_DMA_MARK_CLEAN
 	select ARCH_HAS_STRNCPY_FROM_USER
 	select ARCH_HAS_STRNLEN_USER
diff --git linux-libre-6.1-gnu/arch/ia64/include/asm/bugs.h linux-libre-6.1.56-gnu/arch/ia64/include/asm/bugs.h
deleted file mode 100644
index 0d6b9bded56c..000000000000
--- linux-libre-6.1-gnu/arch/ia64/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- *
- * Based on <asm-alpha/bugs.h>.
- *
- * Modified 1998, 1999, 2003
- *	David Mosberger-Tang <davidm@hpl.hp.com>,  Hewlett-Packard Co.
- */
-#ifndef _ASM_IA64_BUGS_H
-#define _ASM_IA64_BUGS_H
-
-#include <asm/processor.h>
-
-extern void check_bugs (void);
-
-#endif /* _ASM_IA64_BUGS_H */
diff --git linux-libre-6.1-gnu/arch/ia64/kernel/elfcore.c linux-libre-6.1.56-gnu/arch/ia64/kernel/elfcore.c
index 94680521fbf9..8895df121540 100644
--- linux-libre-6.1-gnu/arch/ia64/kernel/elfcore.c
+++ linux-libre-6.1.56-gnu/arch/ia64/kernel/elfcore.c
@@ -7,7 +7,7 @@
 #include <asm/elf.h>
 
 
-Elf64_Half elf_core_extra_phdrs(void)
+Elf64_Half elf_core_extra_phdrs(struct coredump_params *cprm)
 {
 	return GATE_EHDR->e_phnum;
 }
@@ -60,7 +60,7 @@ int elf_core_write_extra_data(struct coredump_params *cprm)
 	return 1;
 }
 
-size_t elf_core_extra_data_size(void)
+size_t elf_core_extra_data_size(struct coredump_params *cprm)
 {
 	const struct elf_phdr *const gate_phdrs =
 		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);
diff --git linux-libre-6.1-gnu/arch/ia64/kernel/salinfo.c linux-libre-6.1.56-gnu/arch/ia64/kernel/salinfo.c
index bd3ba276e69c..03b632c56899 100644
--- linux-libre-6.1-gnu/arch/ia64/kernel/salinfo.c
+++ linux-libre-6.1.56-gnu/arch/ia64/kernel/salinfo.c
@@ -581,7 +581,7 @@ static int salinfo_cpu_pre_down(unsigned int cpu)
  * 'data' contains an integer that corresponds to the feature we're
  * testing
  */
-static int proc_salinfo_show(struct seq_file *m, void *v)
+static int __maybe_unused proc_salinfo_show(struct seq_file *m, void *v)
 {
 	unsigned long data = (unsigned long)v;
 	seq_puts(m, (sal_platform_features & data) ? "1\n" : "0\n");
diff --git linux-libre-6.1-gnu/arch/ia64/kernel/setup.c linux-libre-6.1.56-gnu/arch/ia64/kernel/setup.c
index c05728044272..9009f1871e3b 100644
--- linux-libre-6.1-gnu/arch/ia64/kernel/setup.c
+++ linux-libre-6.1.56-gnu/arch/ia64/kernel/setup.c
@@ -1067,8 +1067,7 @@ cpu_init (void)
 	}
 }
 
-void __init
-check_bugs (void)
+void __init arch_cpu_finalize_init(void)
 {
 	ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles,
 			       (unsigned long) __end___mckinley_e9_bundles);
diff --git linux-libre-6.1-gnu/arch/ia64/kernel/sys_ia64.c linux-libre-6.1.56-gnu/arch/ia64/kernel/sys_ia64.c
index 215bf3f8cb20..4f24910cfe73 100644
--- linux-libre-6.1-gnu/arch/ia64/kernel/sys_ia64.c
+++ linux-libre-6.1.56-gnu/arch/ia64/kernel/sys_ia64.c
@@ -170,6 +170,9 @@ ia64_mremap (unsigned long addr, unsigned long old_len, unsigned long new_len, u
 asmlinkage long
 ia64_clock_getres(const clockid_t which_clock, struct __kernel_timespec __user *tp)
 {
+	struct timespec64 rtn_tp;
+	s64 tick_ns;
+
 	/*
 	 * ia64's clock_gettime() syscall is implemented as a vdso call
 	 * fsys_clock_gettime(). Currently it handles only
@@ -185,8 +188,8 @@ ia64_clock_getres(const clockid_t which_clock, struct __kernel_timespec __user *
 	switch (which_clock) {
 	case CLOCK_REALTIME:
 	case CLOCK_MONOTONIC:
-		s64 tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);
-		struct timespec64 rtn_tp = ns_to_timespec64(tick_ns);
+		tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);
+		rtn_tp = ns_to_timespec64(tick_ns);
 		return put_timespec64(&rtn_tp, tp);
 	}
 
diff --git linux-libre-6.1-gnu/arch/ia64/mm/contig.c linux-libre-6.1.56-gnu/arch/ia64/mm/contig.c
index 24901d809301..1e9eaa107eb7 100644
--- linux-libre-6.1-gnu/arch/ia64/mm/contig.c
+++ linux-libre-6.1.56-gnu/arch/ia64/mm/contig.c
@@ -77,7 +77,7 @@ skip:
 	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
 }
 
-static inline void
+static inline __init void
 alloc_per_cpu_data(void)
 {
 	size_t size = PERCPU_PAGE_SIZE * num_possible_cpus();
diff --git linux-libre-6.1-gnu/arch/ia64/mm/fault.c linux-libre-6.1.56-gnu/arch/ia64/mm/fault.c
index ef78c2d66cdd..99a09abe1d2c 100644
--- linux-libre-6.1-gnu/arch/ia64/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/ia64/mm/fault.c
@@ -110,10 +110,12 @@ retry:
          * register backing store that needs to expand upwards, in
          * this case vma will be null, but prev_vma will ne non-null
          */
-        if (( !vma && prev_vma ) || (address < vma->vm_start) )
-		goto check_expansion;
+        if (( !vma && prev_vma ) || (address < vma->vm_start) ) {
+		vma = expand_stack(mm, address);
+		if (!vma)
+			goto bad_area_nosemaphore;
+	}
 
-  good_area:
 	code = SEGV_ACCERR;
 
 	/* OK, we've got a good vm_area for this memory area.  Check the access permissions: */
@@ -174,35 +176,9 @@ retry:
 	mmap_read_unlock(mm);
 	return;
 
-  check_expansion:
-	if (!(prev_vma && (prev_vma->vm_flags & VM_GROWSUP) && (address == prev_vma->vm_end))) {
-		if (!vma)
-			goto bad_area;
-		if (!(vma->vm_flags & VM_GROWSDOWN))
-			goto bad_area;
-		if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
-		    || REGION_OFFSET(address) >= RGN_MAP_LIMIT)
-			goto bad_area;
-		if (expand_stack(vma, address))
-			goto bad_area;
-	} else {
-		vma = prev_vma;
-		if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
-		    || REGION_OFFSET(address) >= RGN_MAP_LIMIT)
-			goto bad_area;
-		/*
-		 * Since the register backing store is accessed sequentially,
-		 * we disallow growing it by more than a page at a time.
-		 */
-		if (address > vma->vm_end + PAGE_SIZE - sizeof(long))
-			goto bad_area;
-		if (expand_upwards(vma, address))
-			goto bad_area;
-	}
-	goto good_area;
-
   bad_area:
 	mmap_read_unlock(mm);
+  bad_area_nosemaphore:
 	if ((isr & IA64_ISR_SP)
 	    || ((isr & IA64_ISR_NA) && (isr & IA64_ISR_CODE_MASK) == IA64_ISR_CODE_LFETCH))
 	{
diff --git linux-libre-6.1-gnu/arch/ia64/mm/hugetlbpage.c linux-libre-6.1.56-gnu/arch/ia64/mm/hugetlbpage.c
index f993cb36c062..921db957d2e6 100644
--- linux-libre-6.1-gnu/arch/ia64/mm/hugetlbpage.c
+++ linux-libre-6.1.56-gnu/arch/ia64/mm/hugetlbpage.c
@@ -58,7 +58,7 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr, unsigned long sz)
 
 	pgd = pgd_offset(mm, taddr);
 	if (pgd_present(*pgd)) {
-		p4d = p4d_offset(pgd, addr);
+		p4d = p4d_offset(pgd, taddr);
 		if (p4d_present(*p4d)) {
 			pud = pud_offset(p4d, taddr);
 			if (pud_present(*pud)) {
diff --git linux-libre-6.1-gnu/arch/loongarch/Kconfig linux-libre-6.1.56-gnu/arch/loongarch/Kconfig
index 903096bd87f8..e737dc8cd660 100644
--- linux-libre-6.1-gnu/arch/loongarch/Kconfig
+++ linux-libre-6.1.56-gnu/arch/loongarch/Kconfig
@@ -10,6 +10,7 @@ config LOONGARCH
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
@@ -107,6 +108,7 @@ config LOONGARCH
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN if !SMP
 	select IRQ_FORCED_THREADING
 	select IRQ_LOONGARCH_CPU
+	select LOCK_MM_AND_FIND_VMA
 	select MMU_GATHER_MERGE_VMAS if MMU
 	select MODULES_USE_ELF_RELA if MODULES
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
diff --git linux-libre-6.1-gnu/arch/loongarch/include/asm/cpu-features.h linux-libre-6.1.56-gnu/arch/loongarch/include/asm/cpu-features.h
index b07974218393..f6177f133477 100644
--- linux-libre-6.1-gnu/arch/loongarch/include/asm/cpu-features.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/include/asm/cpu-features.h
@@ -42,6 +42,7 @@
 #define cpu_has_fpu		cpu_opt(LOONGARCH_CPU_FPU)
 #define cpu_has_lsx		cpu_opt(LOONGARCH_CPU_LSX)
 #define cpu_has_lasx		cpu_opt(LOONGARCH_CPU_LASX)
+#define cpu_has_crc32		cpu_opt(LOONGARCH_CPU_CRC32)
 #define cpu_has_complex		cpu_opt(LOONGARCH_CPU_COMPLEX)
 #define cpu_has_crypto		cpu_opt(LOONGARCH_CPU_CRYPTO)
 #define cpu_has_lvz		cpu_opt(LOONGARCH_CPU_LVZ)
diff --git linux-libre-6.1-gnu/arch/loongarch/include/asm/cpu.h linux-libre-6.1.56-gnu/arch/loongarch/include/asm/cpu.h
index 754f28506791..927577055263 100644
--- linux-libre-6.1-gnu/arch/loongarch/include/asm/cpu.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/include/asm/cpu.h
@@ -78,25 +78,26 @@ enum cpu_type_enum {
 #define CPU_FEATURE_FPU			3	/* CPU has FPU */
 #define CPU_FEATURE_LSX			4	/* CPU has LSX (128-bit SIMD) */
 #define CPU_FEATURE_LASX		5	/* CPU has LASX (256-bit SIMD) */
-#define CPU_FEATURE_COMPLEX		6	/* CPU has Complex instructions */
-#define CPU_FEATURE_CRYPTO		7	/* CPU has Crypto instructions */
-#define CPU_FEATURE_LVZ			8	/* CPU has Virtualization extension */
-#define CPU_FEATURE_LBT_X86		9	/* CPU has X86 Binary Translation */
-#define CPU_FEATURE_LBT_ARM		10	/* CPU has ARM Binary Translation */
-#define CPU_FEATURE_LBT_MIPS		11	/* CPU has MIPS Binary Translation */
-#define CPU_FEATURE_TLB			12	/* CPU has TLB */
-#define CPU_FEATURE_CSR			13	/* CPU has CSR */
-#define CPU_FEATURE_WATCH		14	/* CPU has watchpoint registers */
-#define CPU_FEATURE_VINT		15	/* CPU has vectored interrupts */
-#define CPU_FEATURE_CSRIPI		16	/* CPU has CSR-IPI */
-#define CPU_FEATURE_EXTIOI		17	/* CPU has EXT-IOI */
-#define CPU_FEATURE_PREFETCH		18	/* CPU has prefetch instructions */
-#define CPU_FEATURE_PMP			19	/* CPU has perfermance counter */
-#define CPU_FEATURE_SCALEFREQ		20	/* CPU supports cpufreq scaling */
-#define CPU_FEATURE_FLATMODE		21	/* CPU has flat mode */
-#define CPU_FEATURE_EIODECODE		22	/* CPU has EXTIOI interrupt pin decode mode */
-#define CPU_FEATURE_GUESTID		23	/* CPU has GuestID feature */
-#define CPU_FEATURE_HYPERVISOR		24	/* CPU has hypervisor (running in VM) */
+#define CPU_FEATURE_CRC32		6	/* CPU has CRC32 instructions */
+#define CPU_FEATURE_COMPLEX		7	/* CPU has Complex instructions */
+#define CPU_FEATURE_CRYPTO		8	/* CPU has Crypto instructions */
+#define CPU_FEATURE_LVZ			9	/* CPU has Virtualization extension */
+#define CPU_FEATURE_LBT_X86		10	/* CPU has X86 Binary Translation */
+#define CPU_FEATURE_LBT_ARM		11	/* CPU has ARM Binary Translation */
+#define CPU_FEATURE_LBT_MIPS		12	/* CPU has MIPS Binary Translation */
+#define CPU_FEATURE_TLB			13	/* CPU has TLB */
+#define CPU_FEATURE_CSR			14	/* CPU has CSR */
+#define CPU_FEATURE_WATCH		15	/* CPU has watchpoint registers */
+#define CPU_FEATURE_VINT		16	/* CPU has vectored interrupts */
+#define CPU_FEATURE_CSRIPI		17	/* CPU has CSR-IPI */
+#define CPU_FEATURE_EXTIOI		18	/* CPU has EXT-IOI */
+#define CPU_FEATURE_PREFETCH		19	/* CPU has prefetch instructions */
+#define CPU_FEATURE_PMP			20	/* CPU has perfermance counter */
+#define CPU_FEATURE_SCALEFREQ		21	/* CPU supports cpufreq scaling */
+#define CPU_FEATURE_FLATMODE		22	/* CPU has flat mode */
+#define CPU_FEATURE_EIODECODE		23	/* CPU has EXTIOI interrupt pin decode mode */
+#define CPU_FEATURE_GUESTID		24	/* CPU has GuestID feature */
+#define CPU_FEATURE_HYPERVISOR		25	/* CPU has hypervisor (running in VM) */
 
 #define LOONGARCH_CPU_CPUCFG		BIT_ULL(CPU_FEATURE_CPUCFG)
 #define LOONGARCH_CPU_LAM		BIT_ULL(CPU_FEATURE_LAM)
@@ -104,6 +105,7 @@ enum cpu_type_enum {
 #define LOONGARCH_CPU_FPU		BIT_ULL(CPU_FEATURE_FPU)
 #define LOONGARCH_CPU_LSX		BIT_ULL(CPU_FEATURE_LSX)
 #define LOONGARCH_CPU_LASX		BIT_ULL(CPU_FEATURE_LASX)
+#define LOONGARCH_CPU_CRC32		BIT_ULL(CPU_FEATURE_CRC32)
 #define LOONGARCH_CPU_COMPLEX		BIT_ULL(CPU_FEATURE_COMPLEX)
 #define LOONGARCH_CPU_CRYPTO		BIT_ULL(CPU_FEATURE_CRYPTO)
 #define LOONGARCH_CPU_LVZ		BIT_ULL(CPU_FEATURE_LVZ)
diff --git linux-libre-6.1-gnu/arch/loongarch/include/asm/elf.h linux-libre-6.1.56-gnu/arch/loongarch/include/asm/elf.h
index 7af0cebf28d7..b9a4ab54285c 100644
--- linux-libre-6.1-gnu/arch/loongarch/include/asm/elf.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/include/asm/elf.h
@@ -111,6 +111,15 @@
 #define R_LARCH_TLS_GD_HI20			98
 #define R_LARCH_32_PCREL			99
 #define R_LARCH_RELAX				100
+#define R_LARCH_DELETE				101
+#define R_LARCH_ALIGN				102
+#define R_LARCH_PCREL20_S2			103
+#define R_LARCH_CFA				104
+#define R_LARCH_ADD6				105
+#define R_LARCH_SUB6				106
+#define R_LARCH_ADD_ULEB128			107
+#define R_LARCH_SUB_ULEB128			108
+#define R_LARCH_64_PCREL			109
 
 #ifndef ELF_ARCH
 
diff --git linux-libre-6.1-gnu/arch/loongarch/include/asm/loongarch.h linux-libre-6.1.56-gnu/arch/loongarch/include/asm/loongarch.h
index 7f8d57a61c8b..3d15fa5bef37 100644
--- linux-libre-6.1-gnu/arch/loongarch/include/asm/loongarch.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/include/asm/loongarch.h
@@ -117,7 +117,7 @@ static inline u32 read_cpucfg(u32 reg)
 #define  CPUCFG1_EP			BIT(22)
 #define  CPUCFG1_RPLV			BIT(23)
 #define  CPUCFG1_HUGEPG			BIT(24)
-#define  CPUCFG1_IOCSRBRD		BIT(25)
+#define  CPUCFG1_CRC32			BIT(25)
 #define  CPUCFG1_MSGINT			BIT(26)
 
 #define LOONGARCH_CPUCFG2		0x2
@@ -1488,7 +1488,7 @@ __BUILD_CSR_OP(tlbidx)
 #define write_fcsr(dest, val) \
 do {	\
 	__asm__ __volatile__(	\
-	"	movgr2fcsr	%0, "__stringify(dest)"	\n"	\
+	"	movgr2fcsr	"__stringify(dest)", %0	\n"	\
 	: : "r" (val));	\
 } while (0)
 
diff --git linux-libre-6.1-gnu/arch/loongarch/include/asm/pgtable-bits.h linux-libre-6.1.56-gnu/arch/loongarch/include/asm/pgtable-bits.h
index 3d1e0a69975a..5f2ebcea509c 100644
--- linux-libre-6.1-gnu/arch/loongarch/include/asm/pgtable-bits.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/include/asm/pgtable-bits.h
@@ -21,12 +21,14 @@
 #define	_PAGE_HGLOBAL_SHIFT	12 /* HGlobal is a PMD bit */
 #define	_PAGE_PFN_SHIFT		12
 #define	_PAGE_PFN_END_SHIFT	48
+#define	_PAGE_PRESENT_INVALID_SHIFT 60
 #define	_PAGE_NO_READ_SHIFT	61
 #define	_PAGE_NO_EXEC_SHIFT	62
 #define	_PAGE_RPLV_SHIFT	63
 
 /* Used by software */
 #define _PAGE_PRESENT		(_ULCAST_(1) << _PAGE_PRESENT_SHIFT)
+#define _PAGE_PRESENT_INVALID	(_ULCAST_(1) << _PAGE_PRESENT_INVALID_SHIFT)
 #define _PAGE_WRITE		(_ULCAST_(1) << _PAGE_WRITE_SHIFT)
 #define _PAGE_ACCESSED		(_ULCAST_(1) << _PAGE_ACCESSED_SHIFT)
 #define _PAGE_MODIFIED		(_ULCAST_(1) << _PAGE_MODIFIED_SHIFT)
diff --git linux-libre-6.1-gnu/arch/loongarch/include/asm/pgtable.h linux-libre-6.1.56-gnu/arch/loongarch/include/asm/pgtable.h
index 79d5bfd913e0..f991e678ca4b 100644
--- linux-libre-6.1-gnu/arch/loongarch/include/asm/pgtable.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/include/asm/pgtable.h
@@ -208,7 +208,7 @@ static inline int pmd_bad(pmd_t pmd)
 static inline int pmd_present(pmd_t pmd)
 {
 	if (unlikely(pmd_val(pmd) & _PAGE_HUGE))
-		return !!(pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROTNONE));
+		return !!(pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_PRESENT_INVALID));
 
 	return pmd_val(pmd) != (unsigned long)invalid_pte_table;
 }
@@ -525,6 +525,7 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 
 static inline pmd_t pmd_mkinvalid(pmd_t pmd)
 {
+	pmd_val(pmd) |= _PAGE_PRESENT_INVALID;
 	pmd_val(pmd) &= ~(_PAGE_PRESENT | _PAGE_VALID | _PAGE_DIRTY | _PAGE_PROTNONE);
 
 	return pmd;
@@ -559,6 +560,9 @@ static inline long pmd_protnone(pmd_t pmd)
 }
 #endif /* CONFIG_NUMA_BALANCING */
 
+#define pmd_leaf(pmd)		((pmd_val(pmd) & _PAGE_HUGE) != 0)
+#define pud_leaf(pud)		((pud_val(pud) & _PAGE_HUGE) != 0)
+
 /*
  * We provide our own get_unmapped area to cope with the virtual aliasing
  * constraints placed on us by the cache architecture.
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/cpu-probe.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/cpu-probe.c
index 255a09876ef2..5adf0f736c6d 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/cpu-probe.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/cpu-probe.c
@@ -60,7 +60,7 @@ static inline void set_elf_platform(int cpu, const char *plat)
 
 /* MAP BASE */
 unsigned long vm_map_base;
-EXPORT_SYMBOL_GPL(vm_map_base);
+EXPORT_SYMBOL(vm_map_base);
 
 static void cpu_probe_addrbits(struct cpuinfo_loongarch *c)
 {
@@ -94,13 +94,18 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c)
 	c->options = LOONGARCH_CPU_CPUCFG | LOONGARCH_CPU_CSR |
 		     LOONGARCH_CPU_TLB | LOONGARCH_CPU_VINT | LOONGARCH_CPU_WATCH;
 
-	elf_hwcap |= HWCAP_LOONGARCH_CRC32;
+	elf_hwcap = HWCAP_LOONGARCH_CPUCFG;
 
 	config = read_cpucfg(LOONGARCH_CPUCFG1);
 	if (config & CPUCFG1_UAL) {
 		c->options |= LOONGARCH_CPU_UAL;
 		elf_hwcap |= HWCAP_LOONGARCH_UAL;
 	}
+	if (config & CPUCFG1_CRC32) {
+		c->options |= LOONGARCH_CPU_CRC32;
+		elf_hwcap |= HWCAP_LOONGARCH_CRC32;
+	}
+
 
 	config = read_cpucfg(LOONGARCH_CPUCFG2);
 	if (config & CPUCFG2_LAM) {
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/mem.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/mem.c
index 4a4107a6a965..aed901c57fb4 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/mem.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/mem.c
@@ -50,7 +50,6 @@ void __init memblock_init(void)
 	}
 
 	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
-	memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
 
 	/* Reserve the first 2MB */
 	memblock_reserve(PHYS_OFFSET, 0x200000);
@@ -58,4 +57,7 @@ void __init memblock_init(void)
 	/* Reserve the kernel text/data/bss */
 	memblock_reserve(__pa_symbol(&_text),
 			 __pa_symbol(&_end) - __pa_symbol(&_text));
+
+	memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
+	memblock_set_node(0, PHYS_ADDR_MAX, &memblock.reserved, 0);
 }
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/module.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/module.c
index 097595b2fc14..4f1e6e55dc02 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/module.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/module.c
@@ -376,7 +376,7 @@ typedef int (*reloc_rela_handler)(struct module *mod, u32 *location, Elf_Addr v,
 
 /* The handlers for known reloc types */
 static reloc_rela_handler reloc_rela_handlers[] = {
-	[R_LARCH_NONE ... R_LARCH_RELAX]		     = apply_r_larch_error,
+	[R_LARCH_NONE ... R_LARCH_64_PCREL]		     = apply_r_larch_error,
 
 	[R_LARCH_NONE]					     = apply_r_larch_none,
 	[R_LARCH_32]					     = apply_r_larch_32,
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/numa.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/numa.c
index a13f92593cfd..f7ffce170213 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/numa.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/numa.c
@@ -453,7 +453,7 @@ void __init paging_init(void)
 
 void __init mem_init(void)
 {
-	high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 	memblock_free_all();
 	setup_zero_pages();	/* This comes from node 0 */
 }
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/perf_event.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/perf_event.c
index 707bd32e5c4f..3a2edb157b65 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/perf_event.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/perf_event.c
@@ -271,7 +271,7 @@ static void loongarch_pmu_enable_event(struct hw_perf_event *evt, int idx)
 	WARN_ON(idx < 0 || idx >= loongarch_pmu.num_counters);
 
 	/* Make sure interrupt enabled. */
-	cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
+	cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base) |
 		(evt->config_base & M_PERFCTL_CONFIG_MASK) | CSR_PERFCTRL_IE;
 
 	cpu = (event->cpu >= 0) ? event->cpu : smp_processor_id();
@@ -594,7 +594,7 @@ static struct pmu pmu = {
 
 static unsigned int loongarch_pmu_perf_event_encode(const struct loongarch_perf_event *pev)
 {
-	return (pev->event_id & 0xff);
+	return M_PERFCTL_EVENT(pev->event_id);
 }
 
 static const struct loongarch_perf_event *loongarch_pmu_map_general_event(int idx)
@@ -849,7 +849,7 @@ static void resume_local_counters(void)
 
 static const struct loongarch_perf_event *loongarch_pmu_map_raw_event(u64 config)
 {
-	raw_event.event_id = config & 0xff;
+	raw_event.event_id = M_PERFCTL_EVENT(config);
 
 	return &raw_event;
 }
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/proc.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/proc.c
index 5c67cc4fd56d..0d82907b5404 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/proc.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/proc.c
@@ -76,6 +76,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_has_fpu)	seq_printf(m, " fpu");
 	if (cpu_has_lsx)	seq_printf(m, " lsx");
 	if (cpu_has_lasx)	seq_printf(m, " lasx");
+	if (cpu_has_crc32)	seq_printf(m, " crc32");
 	if (cpu_has_complex)	seq_printf(m, " complex");
 	if (cpu_has_crypto)	seq_printf(m, " crypto");
 	if (cpu_has_lvz)	seq_printf(m, " lvz");
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/process.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/process.c
index ddb8ba4eb399..90a5de746332 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/process.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/process.c
@@ -185,20 +185,14 @@ out:
 
 unsigned long __get_wchan(struct task_struct *task)
 {
-	unsigned long pc;
+	unsigned long pc = 0;
 	struct unwind_state state;
 
 	if (!try_get_task_stack(task))
 		return 0;
 
-	unwind_start(&state, task, NULL);
-	state.sp = thread_saved_fp(task);
-	get_stack_info(state.sp, state.task, &state.stack_info);
-	state.pc = thread_saved_ra(task);
-#ifdef CONFIG_UNWINDER_PROLOGUE
-	state.type = UNWINDER_PROLOGUE;
-#endif
-	for (; !unwind_done(&state); unwind_next_frame(&state)) {
+	for (unwind_start(&state, task, NULL);
+	     !unwind_done(&state); unwind_next_frame(&state)) {
 		pc = unwind_get_return_address(&state);
 		if (!pc)
 			break;
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/time.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/time.c
index 786735dcc8d6..d2b7d5df132a 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/time.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/time.c
@@ -135,16 +135,17 @@ static int get_timer_irq(void)
 
 int constant_clockevent_init(void)
 {
-	int irq;
 	unsigned int cpu = smp_processor_id();
 	unsigned long min_delta = 0x600;
 	unsigned long max_delta = (1UL << 48) - 1;
 	struct clock_event_device *cd;
-	static int timer_irq_installed = 0;
+	static int irq = 0, timer_irq_installed = 0;
 
-	irq = get_timer_irq();
-	if (irq < 0)
-		pr_err("Failed to map irq %d (timer)\n", irq);
+	if (!timer_irq_installed) {
+		irq = get_timer_irq();
+		if (irq < 0)
+			pr_err("Failed to map irq %d (timer)\n", irq);
+	}
 
 	cd = &per_cpu(constant_clockevent_device, cpu);
 
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_guess.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/unwind_guess.c
index 5afa6064d73e..0c20e5184de6 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_guess.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/unwind_guess.c
@@ -25,6 +25,12 @@ void unwind_start(struct unwind_state *state, struct task_struct *task,
 	if (regs) {
 		state->sp = regs->regs[3];
 		state->pc = regs->csr_era;
+	} else if (task && task != current) {
+		state->sp = thread_saved_fp(task);
+		state->pc = thread_saved_ra(task);
+	} else {
+		state->sp = (unsigned long)__builtin_frame_address(0);
+		state->pc = (unsigned long)__builtin_return_address(0);
 	}
 
 	state->task = task;
diff --git linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_prologue.c linux-libre-6.1.56-gnu/arch/loongarch/kernel/unwind_prologue.c
index 4571c3c87cd4..1c5b65756144 100644
--- linux-libre-6.1-gnu/arch/loongarch/kernel/unwind_prologue.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/kernel/unwind_prologue.c
@@ -111,12 +111,22 @@ void unwind_start(struct unwind_state *state, struct task_struct *task,
 		    struct pt_regs *regs)
 {
 	memset(state, 0, sizeof(*state));
+	state->type = UNWINDER_PROLOGUE;
 
-	if (regs &&  __kernel_text_address(regs->csr_era)) {
-		state->pc = regs->csr_era;
+	if (regs) {
 		state->sp = regs->regs[3];
+		state->pc = regs->csr_era;
 		state->ra = regs->regs[1];
-		state->type = UNWINDER_PROLOGUE;
+		if (!__kernel_text_address(state->pc))
+			state->type = UNWINDER_GUESS;
+	} else if (task && task != current) {
+		state->sp = thread_saved_fp(task);
+		state->pc = thread_saved_ra(task);
+		state->ra = 0;
+	} else {
+		state->sp = (unsigned long)__builtin_frame_address(0);
+		state->pc = (unsigned long)__builtin_return_address(0);
+		state->ra = 0;
 	}
 
 	state->task = task;
diff --git linux-libre-6.1-gnu/arch/loongarch/mm/fault.c linux-libre-6.1.56-gnu/arch/loongarch/mm/fault.c
index 1ccd53655cab..b829ab911a17 100644
--- linux-libre-6.1-gnu/arch/loongarch/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/mm/fault.c
@@ -166,22 +166,18 @@ static void __kprobes __do_page_fault(struct pt_regs *regs,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (!expand_stack(vma, address))
-		goto good_area;
+	vma = lock_mm_and_find_vma(mm, address, regs);
+	if (unlikely(!vma))
+		goto bad_area_nosemaphore;
+	goto good_area;
+
 /*
  * Something tried to access memory that isn't in our memory map..
  * Fix it, but check if it's kernel or user first..
  */
 bad_area:
 	mmap_read_unlock(mm);
+bad_area_nosemaphore:
 	do_sigsegv(regs, write, address, si_code);
 	return;
 
diff --git linux-libre-6.1-gnu/arch/loongarch/mm/init.c linux-libre-6.1.56-gnu/arch/loongarch/mm/init.c
index 080061793c85..c7e9c96719fa 100644
--- linux-libre-6.1-gnu/arch/loongarch/mm/init.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/mm/init.c
@@ -41,7 +41,7 @@
  * don't have to care about aliases on other CPUs.
  */
 unsigned long empty_zero_page, zero_page_mask;
-EXPORT_SYMBOL_GPL(empty_zero_page);
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(zero_page_mask);
 
 void setup_zero_pages(void)
@@ -231,7 +231,7 @@ pud_t invalid_pud_table[PTRS_PER_PUD] __page_aligned_bss;
 #endif
 #ifndef __PAGETABLE_PMD_FOLDED
 pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
-EXPORT_SYMBOL_GPL(invalid_pmd_table);
+EXPORT_SYMBOL(invalid_pmd_table);
 #endif
 pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned_bss;
 EXPORT_SYMBOL(invalid_pte_table);
diff --git linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.c linux-libre-6.1.56-gnu/arch/loongarch/net/bpf_jit.c
index bdcd0c7719a9..82b4402810da 100644
--- linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.c
+++ linux-libre-6.1.56-gnu/arch/loongarch/net/bpf_jit.c
@@ -782,7 +782,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 		if (ret < 0)
 			return ret;
 
-		move_imm(ctx, t1, func_addr, is32);
+		move_addr(ctx, t1, func_addr);
 		emit_insn(ctx, jirl, t1, LOONGARCH_GPR_RA, 0);
 		move_reg(ctx, regmap[BPF_REG_0], LOONGARCH_GPR_A0);
 		break;
@@ -955,6 +955,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 		emit_atomic(insn, ctx);
 		break;
 
+	/* Speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		break;
+
 	default:
 		pr_err("bpf_jit: unknown opcode %02x\n", code);
 		return -EINVAL;
diff --git linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.h linux-libre-6.1.56-gnu/arch/loongarch/net/bpf_jit.h
index e665ddb0aeb8..684b22f54ccc 100644
--- linux-libre-6.1-gnu/arch/loongarch/net/bpf_jit.h
+++ linux-libre-6.1.56-gnu/arch/loongarch/net/bpf_jit.h
@@ -80,6 +80,27 @@ static inline void emit_sext_32(struct jit_ctx *ctx, enum loongarch_gpr reg, boo
 	emit_insn(ctx, addiw, reg, reg, 0);
 }
 
+static inline void move_addr(struct jit_ctx *ctx, enum loongarch_gpr rd, u64 addr)
+{
+	u64 imm_11_0, imm_31_12, imm_51_32, imm_63_52;
+
+	/* lu12iw rd, imm_31_12 */
+	imm_31_12 = (addr >> 12) & 0xfffff;
+	emit_insn(ctx, lu12iw, rd, imm_31_12);
+
+	/* ori rd, rd, imm_11_0 */
+	imm_11_0 = addr & 0xfff;
+	emit_insn(ctx, ori, rd, rd, imm_11_0);
+
+	/* lu32id rd, imm_51_32 */
+	imm_51_32 = (addr >> 32) & 0xfffff;
+	emit_insn(ctx, lu32id, rd, imm_51_32);
+
+	/* lu52id rd, rd, imm_63_52 */
+	imm_63_52 = (addr >> 52) & 0xfff;
+	emit_insn(ctx, lu52id, rd, rd, imm_63_52);
+}
+
 static inline void move_imm(struct jit_ctx *ctx, enum loongarch_gpr rd, long imm, bool is32)
 {
 	long imm_11_0, imm_31_12, imm_51_32, imm_63_52, imm_51_0, imm_51_31;
@@ -127,7 +148,7 @@ static inline void move_imm(struct jit_ctx *ctx, enum loongarch_gpr rd, long imm
 			 * no need to call lu32id to do a new filled operation.
 			 */
 			imm_51_31 = (imm >> 31) & 0x1fffff;
-			if (imm_51_31 != 0 || imm_51_31 != 0x1fffff) {
+			if (imm_51_31 != 0 && imm_51_31 != 0x1fffff) {
 				/* lu32id rd, imm_51_32 */
 				imm_51_32 = (imm >> 32) & 0xfffff;
 				emit_insn(ctx, lu32id, rd, imm_51_32);
diff --git linux-libre-6.1-gnu/arch/m68k/68000/entry.S linux-libre-6.1.56-gnu/arch/m68k/68000/entry.S
index 997b54933015..7d63e2f1555a 100644
--- linux-libre-6.1-gnu/arch/m68k/68000/entry.S
+++ linux-libre-6.1.56-gnu/arch/m68k/68000/entry.S
@@ -45,6 +45,8 @@ do_trace:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%sp@(PT_OFF_ORIG_D0),%d1
 	movel	#-ENOSYS,%d0
 	cmpl	#NR_syscalls,%d1
diff --git linux-libre-6.1-gnu/arch/m68k/Kconfig linux-libre-6.1.56-gnu/arch/m68k/Kconfig
index 7bff88118507..1fe5b2018745 100644
--- linux-libre-6.1-gnu/arch/m68k/Kconfig
+++ linux-libre-6.1.56-gnu/arch/m68k/Kconfig
@@ -4,6 +4,7 @@ config M68K
 	default y
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DMA_PREP_COHERENT if HAS_DMA && MMU && !COLDFIRE
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if HAS_DMA
diff --git linux-libre-6.1-gnu/arch/m68k/Kconfig.devices linux-libre-6.1.56-gnu/arch/m68k/Kconfig.devices
index 6a87b4a5fcac..e6e3efac1840 100644
--- linux-libre-6.1-gnu/arch/m68k/Kconfig.devices
+++ linux-libre-6.1.56-gnu/arch/m68k/Kconfig.devices
@@ -19,6 +19,7 @@ config HEARTBEAT
 # We have a dedicated heartbeat LED. :-)
 config PROC_HARDWARE
 	bool "/proc/hardware support"
+	depends on PROC_FS
 	help
 	  Say Y here to support the /proc/hardware file, which gives you
 	  access to information about the machine you're running on,
diff --git linux-libre-6.1-gnu/arch/m68k/coldfire/entry.S linux-libre-6.1.56-gnu/arch/m68k/coldfire/entry.S
index 9f337c70243a..35104c5417ff 100644
--- linux-libre-6.1-gnu/arch/m68k/coldfire/entry.S
+++ linux-libre-6.1.56-gnu/arch/m68k/coldfire/entry.S
@@ -90,6 +90,8 @@ ENTRY(system_call)
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%d3,%a0
 	jbsr	%a0@
 	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
diff --git linux-libre-6.1-gnu/arch/m68k/fpsp040/skeleton.S linux-libre-6.1.56-gnu/arch/m68k/fpsp040/skeleton.S
index 439395aa6fb4..081922c72daa 100644
--- linux-libre-6.1-gnu/arch/m68k/fpsp040/skeleton.S
+++ linux-libre-6.1.56-gnu/arch/m68k/fpsp040/skeleton.S
@@ -499,13 +499,13 @@ in_ea:
 	dbf	%d0,morein
 	rts
 
-	.section .fixup,#alloc,#execinstr
+	.section .fixup,"ax"
 	.even
 1:
 	jbsr	fpsp040_die
 	jbra	.Lnotkern
 
-	.section __ex_table,#alloc
+	.section __ex_table,"a"
 	.align	4
 
 	.long	in_ea,1b
diff --git linux-libre-6.1-gnu/arch/m68k/ifpsp060/os.S linux-libre-6.1.56-gnu/arch/m68k/ifpsp060/os.S
index 7a0d6e428066..89e2ec224ab6 100644
--- linux-libre-6.1-gnu/arch/m68k/ifpsp060/os.S
+++ linux-libre-6.1.56-gnu/arch/m68k/ifpsp060/os.S
@@ -379,11 +379,11 @@ _060_real_access:
 
 
 | Execption handling for movs access to illegal memory
-	.section .fixup,#alloc,#execinstr
+	.section .fixup,"ax"
 	.even
 1:	moveq		#-1,%d1
 	rts
-.section __ex_table,#alloc
+.section __ex_table,"a"
 	.align 4
 	.long	dmrbuae,1b
 	.long	dmrwuae,1b
diff --git linux-libre-6.1-gnu/arch/m68k/include/asm/bugs.h linux-libre-6.1.56-gnu/arch/m68k/include/asm/bugs.h
deleted file mode 100644
index 745530651e0b..000000000000
--- linux-libre-6.1-gnu/arch/m68k/include/asm/bugs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  include/asm-m68k/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-#ifdef CONFIG_MMU
-extern void check_bugs(void);	/* in arch/m68k/kernel/setup.c */
-#else
-static void check_bugs(void)
-{
-}
-#endif
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/entry.S linux-libre-6.1.56-gnu/arch/m68k/kernel/entry.S
index 18f278bdbd21..42879e6eb651 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/entry.S
+++ linux-libre-6.1.56-gnu/arch/m68k/kernel/entry.S
@@ -184,9 +184,12 @@ do_trace_entry:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0			| optimization for cmpil #-1,%d0
+	jeq	ret_from_syscall
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
 	cmpl	#NR_syscalls,%d0
 	jcs	syscall
+	jra	ret_from_syscall
 badsys:
 	movel	#-ENOSYS,%sp@(PT_OFF_D0)
 	jra	ret_from_syscall
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/relocate_kernel.S linux-libre-6.1.56-gnu/arch/m68k/kernel/relocate_kernel.S
index ab0f1e7d4653..f7667079e08e 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/relocate_kernel.S
+++ linux-libre-6.1.56-gnu/arch/m68k/kernel/relocate_kernel.S
@@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel)
 	lea %pc@(.Lcopy),%a4
 2:	addl #0x00000000,%a4		/* virt_to_phys() */
 
-	.section ".m68k_fixup","aw"
+	.section .m68k_fixup,"aw"
 	.long M68K_FIXUP_MEMOFFSET, 2b+2
 	.previous
 
@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel)
 	lea %pc@(.Lcont040),%a4
 5:	addl #0x00000000,%a4		/* virt_to_phys() */
 
-	.section ".m68k_fixup","aw"
+	.section .m68k_fixup,"aw"
 	.long M68K_FIXUP_MEMOFFSET, 5b+2
 	.previous
 
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/setup_mm.c linux-libre-6.1.56-gnu/arch/m68k/kernel/setup_mm.c
index 3a2bb2e8fdad..6f1ae01f322c 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/setup_mm.c
+++ linux-libre-6.1.56-gnu/arch/m68k/kernel/setup_mm.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cpu.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
@@ -326,16 +327,16 @@ void __init setup_arch(char **cmdline_p)
 		panic("No configuration setup");
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (m68k_ramdisk.size) {
+	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && m68k_ramdisk.size)
 		memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
+
+	paging_init();
+
+	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && m68k_ramdisk.size) {
 		initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
 		initrd_end = initrd_start + m68k_ramdisk.size;
 		pr_info("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
 	}
-#endif
-
-	paging_init();
 
 #ifdef CONFIG_NATFEAT
 	nf_init();
@@ -504,7 +505,7 @@ static int __init proc_hardware_init(void)
 module_init(proc_hardware_init);
 #endif
 
-void check_bugs(void)
+void __init arch_cpu_finalize_init(void)
 {
 #if defined(CONFIG_FPU) && !defined(CONFIG_M68KFPU_EMU)
 	if (m68k_fputype == 0) {
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/signal.c linux-libre-6.1.56-gnu/arch/m68k/kernel/signal.c
index b9f6908a31bc..ba468b5f3f0b 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/signal.c
+++ linux-libre-6.1.56-gnu/arch/m68k/kernel/signal.c
@@ -858,11 +858,17 @@ static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *
 }
 
 static inline void __user *
-get_sigframe(struct ksignal *ksig, size_t frame_size)
+get_sigframe(struct ksignal *ksig, struct pt_regs *tregs, size_t frame_size)
 {
 	unsigned long usp = sigsp(rdusp(), ksig);
+	unsigned long gap = 0;
 
-	return (void __user *)((usp - frame_size) & -8UL);
+	if (CPU_IS_020_OR_030 && tregs->format == 0xb) {
+		/* USP is unreliable so use worst-case value */
+		gap = 256;
+	}
+
+	return (void __user *)((usp - gap - frame_size) & -8UL);
 }
 
 static int setup_frame(struct ksignal *ksig, sigset_t *set,
@@ -880,7 +886,7 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set,
 		return -EFAULT;
 	}
 
-	frame = get_sigframe(ksig, sizeof(*frame) + fsize);
+	frame = get_sigframe(ksig, tregs, sizeof(*frame) + fsize);
 
 	if (fsize)
 		err |= copy_to_user (frame + 1, regs + 1, fsize);
@@ -952,7 +958,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 		return -EFAULT;
 	}
 
-	frame = get_sigframe(ksig, sizeof(*frame));
+	frame = get_sigframe(ksig, tregs, sizeof(*frame));
 
 	if (fsize)
 		err |= copy_to_user (&frame->uc.uc_extra, regs + 1, fsize);
diff --git linux-libre-6.1-gnu/arch/m68k/kernel/traps.c linux-libre-6.1.56-gnu/arch/m68k/kernel/traps.c
index 5c8cba0efc63..a700807c9b6d 100644
--- linux-libre-6.1-gnu/arch/m68k/kernel/traps.c
+++ linux-libre-6.1.56-gnu/arch/m68k/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/kallsyms.h>
+#include <linux/extable.h>
 
 #include <asm/setup.h>
 #include <asm/fpu.h>
@@ -545,7 +546,8 @@ static inline void bus_error030 (struct frame *fp)
 			errorcode |= 2;
 
 		if (mmusr & (MMU_I | MMU_WP)) {
-			if (ssw & 4) {
+			/* We might have an exception table for this PC */
+			if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) {
 				pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",
 				       ssw & RW ? "read" : "write",
 				       fp->un.fmtb.daddr,
diff --git linux-libre-6.1-gnu/arch/m68k/mm/fault.c linux-libre-6.1.56-gnu/arch/m68k/mm/fault.c
index 4d2837eb3e2a..6f62af8e293a 100644
--- linux-libre-6.1-gnu/arch/m68k/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/m68k/mm/fault.c
@@ -105,8 +105,9 @@ retry:
 		if (address + 256 < rdusp())
 			goto map_err;
 	}
-	if (expand_stack(vma, address))
-		goto map_err;
+	vma = expand_stack(mm, address);
+	if (!vma)
+		goto map_err_nosemaphore;
 
 /*
  * Ok, we have a good vm_area for this memory access, so
@@ -193,10 +194,12 @@ bus_err:
 	goto send_sig;
 
 map_err:
+	mmap_read_unlock(mm);
+map_err_nosemaphore:
 	current->thread.signo = SIGSEGV;
 	current->thread.code = SEGV_MAPERR;
 	current->thread.faddr = address;
-	goto send_sig;
+	return send_fault_sig(regs);
 
 acc_err:
 	current->thread.signo = SIGSEGV;
diff --git linux-libre-6.1-gnu/arch/m68k/mm/motorola.c linux-libre-6.1.56-gnu/arch/m68k/mm/motorola.c
index 2a375637e007..911301224078 100644
--- linux-libre-6.1-gnu/arch/m68k/mm/motorola.c
+++ linux-libre-6.1.56-gnu/arch/m68k/mm/motorola.c
@@ -437,7 +437,7 @@ void __init paging_init(void)
 	}
 
 	min_addr = m68k_memory[0].addr;
-	max_addr = min_addr + m68k_memory[0].size;
+	max_addr = min_addr + m68k_memory[0].size - 1;
 	memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0,
 			  MEMBLOCK_NONE);
 	for (i = 1; i < m68k_num_memory;) {
@@ -452,21 +452,21 @@ void __init paging_init(void)
 		}
 		memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i,
 				  MEMBLOCK_NONE);
-		addr = m68k_memory[i].addr + m68k_memory[i].size;
+		addr = m68k_memory[i].addr + m68k_memory[i].size - 1;
 		if (addr > max_addr)
 			max_addr = addr;
 		i++;
 	}
 	m68k_memoffset = min_addr - PAGE_OFFSET;
-	m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6;
+	m68k_virt_to_node_shift = fls(max_addr - min_addr) - 6;
 
 	module_fixup(NULL, __start_fixup, __stop_fixup);
 	flush_icache();
 
-	high_memory = phys_to_virt(max_addr);
+	high_memory = phys_to_virt(max_addr) + 1;
 
 	min_low_pfn = availmem >> PAGE_SHIFT;
-	max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
+	max_pfn = max_low_pfn = (max_addr >> PAGE_SHIFT) + 1;
 
 	/* Reserve kernel text/data/bss and the memory allocated in head.S */
 	memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
diff --git linux-libre-6.1-gnu/arch/microblaze/mm/fault.c linux-libre-6.1.56-gnu/arch/microblaze/mm/fault.c
index 5c40c3ebe52f..a409bb3f09f7 100644
--- linux-libre-6.1-gnu/arch/microblaze/mm/fault.c
+++ linux-libre-6.1.56-gnu/arch/microblaze/mm/fault.c
@@ -192,8 +192,9 @@ retry:
 			&& (kernel_mode(regs) || !store_updates_sp(regs)))
 				goto bad_area;
 	}
-	if (expand_stack(vma, address))
-		goto bad_area;
+	vma = expand_stack(mm, address);
+	if (!vma)
+		goto bad_area_nosemaphore;
 
 good_area:
 	code = SEGV_ACCERR;
diff --git linux-libre-6.1-gnu/arch/mips/Kconfig linux-libre-6.1.56-gnu/arch/mips/Kconfig
index b26b77673c2c..0e62f5edaee2 100644
--- linux-libre-6.1-gnu/arch/mips/Kconfig
+++ linux-libre-6.1.56-gnu/arch/mips/Kconfig
@@ -4,6 +4,7 @@ config MIPS
 	default y
 	select ARCH_32BIT_OFF_T if !64BIT
 	select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
+	select ARCH_HAS_CPU_FINALIZE_INIT
 	select ARCH_HAS_CURRENT_STACK_POINTER if !CC_IS_CLANG || CLANG_VERSION >= 140000
 	select ARCH_HAS_DEBUG_VIRTUAL if !64BIT
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -93,6 +94,7 @@ config MIPS
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
 	select IRQ_FORCED_THREADING
 	select ISA if EISA
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL if MODULES
 	select MODULES_USE_ELF_RELA if MODULES && 64BIT
 	select PERF_USE_VMALLOC
diff --git linux-libre-6.1-gnu/arch/mips/Makefile linux-libre-6.1.56-gnu/arch/mips/Makefile
index b296e33f8e33..dd6486097e1d 100644
--- linux-libre-6.1-gnu/arch/mips/Makefile
+++ linux-libre-6.1.56-gnu/arch/mips/Makefile
@@ -109,7 +109,7 @@ endif
 # (specifically newer than 2.24.51.20140728) we then also need to explicitly
 # set ".set hardfloat" in all files which manipulate floating point registers.
 #
-ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+ifneq ($(call cc-option,$(cflags-y) -Wa$(comma)-msoft-float,),)
 	cflags-y		+= -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
 endif
 
@@ -152,7 +152,7 @@ cflags-y += -fno-stack-check
 #
 # Avoid this by explicitly disabling that assembler behaviour.
 #
-cflags-y += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+cflags-y += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
 
 #
 # CPU-dependent compiler/assembler options for optimization.
@@ -190,9 +190,43 @@ endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
+cflags-$(CONFIG_CPU_LOONGSON2E) += $(call cc-option,-march=loongson2e) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += $(call cc-option,-march=loongson2f) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction