diff --git linux-libre-6.12-gnu/.clippy.toml linux-libre-6.12.38-gnu/.clippy.toml
new file mode 100644
index 000000000000..5d99a317f7d6
--- /dev/null
+++ linux-libre-6.12.38-gnu/.clippy.toml
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+
+check-private-items = true
+
+disallowed-macros = [
+    # The `clippy::dbg_macro` lint only works with `std::dbg!`, thus we simulate
+    # it here, see: https://github.com/rust-lang/rust-clippy/issues/11303.
+    { path = "kernel::dbg", reason = "the `dbg!` macro is intended as a debugging tool", allow-invalid = true },
+]
diff --git linux-libre-6.12-gnu/.gitignore linux-libre-6.12.38-gnu/.gitignore
index 56972adb5031..a61e4778d011 100644
--- linux-libre-6.12-gnu/.gitignore
+++ linux-libre-6.12.38-gnu/.gitignore
@@ -103,6 +103,7 @@ modules.order
 # We don't want to ignore the following even if they are dot-files
 #
 !.clang-format
+!.clippy.toml
 !.cocciconfig
 !.editorconfig
 !.get_maintainer.ignore
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-bus-pci
index 7f63c7e97773..5da6a14dc326 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 206079d3bd5b..53755b2021ed 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -511,6 +511,7 @@ Description:	information about CPUs heterogeneity.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
@@ -522,6 +523,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index 5fa6655aee84..16f17e91ee49 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index fdedf1ea944b..3e1630c70d8a 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.12.38-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
@@ -819,3 +822,9 @@ Description:	It controls the valid block ratio threshold not to trigger excessiv
 		for zoned deivces. The initial value of it is 95(%). F2FS will stop the
 		background GC thread from intiating GC for sections having valid blocks
 		exceeding the ratio.
+
+What:		/sys/fs/f2fs/<disk>/max_read_extent_count
+Date:		November 2024
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	It controls max read extent count for per-inode, the value of threshold
+		is 10240 by default.
diff --git linux-libre-6.12-gnu/Documentation/RCU/stallwarn.rst linux-libre-6.12.38-gnu/Documentation/RCU/stallwarn.rst
index ca7b7cd806a1..30080ff6f406 100644
--- linux-libre-6.12-gnu/Documentation/RCU/stallwarn.rst
+++ linux-libre-6.12.38-gnu/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
diff --git linux-libre-6.12-gnu/Documentation/accel/qaic/aic080.rst linux-libre-6.12.38-gnu/Documentation/accel/qaic/aic080.rst
new file mode 100644
index 000000000000..d563771ea6ce
--- /dev/null
+++ linux-libre-6.12.38-gnu/Documentation/accel/qaic/aic080.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+===============================
+ Qualcomm Cloud AI 80 (AIC080)
+===============================
+
+Overview
+========
+
+The Qualcomm Cloud AI 80/AIC080 family of products are a derivative of AIC100.
+The number of NSPs and clock rates are reduced to fit within resource
+constrained solutions. The PCIe Product ID is 0xa080.
+
+As a derivative product, all AIC100 documentation applies.
diff --git linux-libre-6.12-gnu/Documentation/accel/qaic/index.rst linux-libre-6.12.38-gnu/Documentation/accel/qaic/index.rst
index ad19b88d1a66..967b9dd8bace 100644
--- linux-libre-6.12-gnu/Documentation/accel/qaic/index.rst
+++ linux-libre-6.12.38-gnu/Documentation/accel/qaic/index.rst
@@ -10,4 +10,5 @@ accelerator cards.
 .. toctree::
 
    qaic
+   aic080
    aic100
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/blockdev/zram.rst
index 678d70d6e1c3..714a5171bfc0 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -47,6 +47,8 @@ The list of possible return codes:
 -ENOMEM	  zram was not able to allocate enough memory to fulfil your
 	  needs.
 -EINVAL	  invalid input has been provided.
+-EAGAIN	  re-try operation later (e.g. when attempting to run recompress
+	  and writeback simultaneously).
 ========  =============================================================
 
 If you use 'echo', the returned value is set by the 'echo' utility,
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/cgroup-v2.rst
index 6d02168d78be..2cb58daf3089 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -2954,7 +2954,7 @@ following two functions.
 	a queue (device) has been associated with the bio and
 	before submission.
 
-  wbc_account_cgroup_owner(@wbc, @page, @bytes)
+  wbc_account_cgroup_owner(@wbc, @folio, @bytes)
 	Should be called for each data segment being written out.
 	While this function doesn't care exactly when it's called
 	during the writeback session, it's the easiest and most
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/hw-vuln/index.rst
index ff0b440ef2dc..d2caa390395e 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -22,3 +22,4 @@ are configurable at compile, boot or run time.
    srso
    gather_data_sampling
    reg-file-data-sampling
+   indirect-target-selection
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 000000000000..52fed64bfb78
--- /dev/null
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+RSB Stuffing
+~~~~~~~~~~~~
+RSB-stuffing via Call Depth Tracking is a mitigation for Retbleed RSB-underflow
+attacks. And it also mitigates RETs that are vulnerable to ITS.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   stuff    Deploy RSB-fill mitigation when retpoline is also deployed.
+	    Otherwise, deploy the default mitigation. When retpoline mitigation
+	    is enabled, RSB-stuffing via Call-Depth-Tracking also mitigates
+	    ITS.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+   * - Mitigation: Retpolines, Stuffing RSB
+     - The mitigation is enabled using retpoline and RSB stuffing.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
index 1302fd1b55e8..6dba18dbb9ab 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -157,9 +157,7 @@ This is achieved by using the otherwise unused and obsolete VERW instruction in
 combination with a microcode update. The microcode clears the affected CPU
 buffers when the VERW instruction is executed.
 
-Kernel reuses the MDS function to invoke the buffer clearing:
-
-	mds_clear_cpu_buffers()
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
 
 On MDS affected CPUs, the kernel already invokes CPU buffer clear on
 kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.12.38-gnu/Documentation/admin-guide/kernel-parameters.txt
index d401577b5a6a..f402bbaccc8a 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -2149,6 +2149,23 @@
 			different crypto accelerators. This option can be used
 			to achieve best performance for particular HW.
 
+	indirect_target_selection= [X86,Intel] Mitigation control for Indirect
+			Target Selection(ITS) bug in Intel CPUs. Updated
+			microcode is also required for a fix in IBPB.
+
+			on:     Enable mitigation (default).
+			off:    Disable mitigation.
+			force:	Force the ITS bug and deploy default
+				mitigation.
+			vmexit: Only deploy mitigation if CPU is affected by
+				guest/host isolation part of ITS.
+			stuff:	Deploy RSB-fill mitigation when retpoline is
+				also deployed. Otherwise, deploy the default
+				mitigation.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -3028,6 +3045,8 @@
 			* max_sec_lba48: Set or clear transfer size limit to
 			  65535 sectors.
 
+			* external: Mark port as external (hotplug-capable).
+
 			* [no]lpm: Enable or disable link power management.
 
 			* [no]setxfer: Indicate if transfer speed mode setting
@@ -3508,6 +3527,7 @@
 				expose users to several CPU vulnerabilities.
 				Equivalent to: if nokaslr then kpti=0 [ARM64]
 					       gather_data_sampling=off [X86]
+					       indirect_target_selection=off [X86]
 					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
@@ -6241,6 +6261,8 @@
 
 			Selecting 'on' will also enable the mitigation
 			against user space to user space task attacks.
+			Selecting specific mitigation does not force enable
+			user mitigations.
 
 			Selecting 'off' will disable both the kernel and
 			the user space protections.
@@ -6971,6 +6993,19 @@
 			having this key zero'ed is acceptable. E.g. in testing
 			scenarios.
 
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 7f674a6cfa8a..4ab0fef7d440 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -445,8 +445,10 @@ event	code	Key		Notes
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
 				or toggle screen expand.
-				On newer platforms (2024+)
-				replaced by 0x131f (see below)
+				On 2024 platforms replaced by
+				0x131f (see below) and on newer
+				platforms (2025 +) keycode is
+				replaced by 0x1401 (see below).
 
 0x1009	0x08	FN+F9		-
 
@@ -506,9 +508,11 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
-0x131f	...	FN+F8	        Platform Mode change.
+0x131f	...	FN+F8		Platform Mode change (2024 systems).
 				Implemented in driver.
 
+0x1401	...	FN+F8		Platform Mode change (2025 + systems).
+				Implemented in driver.
 ...	...	...
 
 0x1020	0x1F	unknown
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/media/building.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/media/building.rst
index a06473429916..7a413ba07f93 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/media/building.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/media/building.rst
@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/media/saa7134.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/media/saa7134.rst
index 51eae7eb5ab7..18d7cbc897db 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/media/saa7134.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/media/saa7134.rst
@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.12.38-gnu/Documentation/admin-guide/sysctl/kernel.rst
index f8bc1630eba0..fa21cdd610b2 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.12.38-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -212,6 +212,17 @@ pid>/``).
 This value defaults to 0.
 
 
+core_sort_vma
+=============
+
+The default coredump writes VMAs in address order. By setting
+``core_sort_vma`` to 1, VMAs will be written from smallest size
+to largest size. This is known to break at least elfutils, but
+can be handy when dealing with very large (and truncated)
+coredumps where the more useful debugging details are included
+in the smaller VMAs.
+
+
 core_uses_pid
 =============
 
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/booting.rst linux-libre-6.12.38-gnu/Documentation/arch/arm64/booting.rst
index b57776a68f15..15bcd1b4003a 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/booting.rst
+++ linux-libre-6.12.38-gnu/Documentation/arch/arm64/booting.rst
@@ -285,6 +285,12 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SCR_EL3.FGTEn (bit 27) must be initialised to 0b1.
 
+  For CPUs with the Fine Grained Traps 2 (FEAT_FGT2) extension present:
+
+  - If EL3 is present and the kernel is entered at EL2:
+
+    - SCR_EL3.FGTEn2 (bit 59) must be initialised to 0b1.
+
   For CPUs with support for HCRX_EL2 (FEAT_HCX) present:
 
   - If EL3 is present and the kernel is entered at EL2:
@@ -379,6 +385,22 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
 
+  For CPUs with the Performance Monitors Extension (FEAT_PMUv3p9):
+
+ - If EL3 is present:
+
+    - MDCR_EL3.EnPM2 (bit 7) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - HDFGRTR2_EL2.nPMICNTR_EL0 (bit 2) must be initialised to 0b1.
+    - HDFGRTR2_EL2.nPMICFILTR_EL0 (bit 3) must be initialised to 0b1.
+    - HDFGRTR2_EL2.nPMUACR_EL1 (bit 4) must be initialised to 0b1.
+
+    - HDFGWTR2_EL2.nPMICNTR_EL0 (bit 2) must be initialised to 0b1.
+    - HDFGWTR2_EL2.nPMICFILTR_EL0 (bit 3) must be initialised to 0b1.
+    - HDFGWTR2_EL2.nPMUACR_EL1 (bit 4) must be initialised to 0b1.
+
   For CPUs with Memory Copy and Memory Set instructions (FEAT_MOPS):
 
   - If the kernel is entered at EL1 and EL2 is present:
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/elf_hwcaps.rst linux-libre-6.12.38-gnu/Documentation/arch/arm64/elf_hwcaps.rst
index 694f67fa07d1..ab556426c7ac 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.12.38-gnu/Documentation/arch/arm64/elf_hwcaps.rst
@@ -174,22 +174,28 @@ HWCAP2_DCPODP
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0001.
 
 HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0001.
 
 HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0010.
 
 HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001.
 
 HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001.
 
 HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SM4 == 0b0001.
 
 HWCAP2_FLAGM2
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
@@ -198,16 +204,20 @@ HWCAP2_FRINT
     Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
 
 HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.I8MM == 0b0001.
 
 HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F32MM == 0b0001.
 
 HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F64MM == 0b0001.
 
 HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0001.
 
 HWCAP2_I8MM
     Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
@@ -273,7 +283,8 @@ HWCAP2_EBF16
     Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
 
 HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0010.
 
 HWCAP2_CSSC
     Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
@@ -282,7 +293,8 @@ HWCAP2_RPRFM
     Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
 
 HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0010.
 
 HWCAP2_SME2
     Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
@@ -309,7 +321,8 @@ HWCAP2_HBC
     Functionality implied by ID_AA64ISAR2_EL1.BC == 0b0001.
 
 HWCAP2_SVE_B16B16
-    Functionality implied by ID_AA64ZFR0_EL1.B16B16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.B16B16 == 0b0001.
 
 HWCAP2_LRCPC3
     Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0011.
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.12.38-gnu/Documentation/arch/arm64/silicon-errata.rst
index 65bfab1b1861..b42fea07c5ce 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.12.38-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -255,8 +255,11 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip{08,09,10,10C| #162001900      | N/A                         |
-|                | ,11} SMMU PMCG  |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip09           | #162100801      | HISILICON_ERRATUM_162100801 |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
diff --git linux-libre-6.12-gnu/Documentation/arch/x86/boot.rst linux-libre-6.12.38-gnu/Documentation/arch/x86/boot.rst
index 4fd492cb4970..ad2d8ddad27f 100644
--- linux-libre-6.12-gnu/Documentation/arch/x86/boot.rst
+++ linux-libre-6.12.38-gnu/Documentation/arch/x86/boot.rst
@@ -896,10 +896,19 @@ Offset/size:	0x260/4
 
   The kernel runtime start address is determined by the following algorithm::
 
-	if (relocatable_kernel)
-	runtime_start = align_up(load_address, kernel_alignment)
-	else
-	runtime_start = pref_address
+   	if (relocatable_kernel) {
+   		if (load_address < pref_address)
+   			load_address = pref_address;
+   		runtime_start = align_up(load_address, kernel_alignment);
+   	} else {
+   		runtime_start = pref_address;
+   	}
+
+Hence the necessary memory window location and size can be estimated by
+a boot loader as::
+
+   	memory_window_start = runtime_start;
+   	memory_window_size = init_size;
 
 ============	===============
 Field name:	handover_offset
diff --git linux-libre-6.12-gnu/Documentation/arch/x86/mds.rst linux-libre-6.12.38-gnu/Documentation/arch/x86/mds.rst
index 5a2e6c0ef04a..3518671e1a85 100644
--- linux-libre-6.12-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.12.38-gnu/Documentation/arch/x86/mds.rst
@@ -93,7 +93,7 @@ enters a C-state.
 
 The kernel provides a function to invoke the buffer clearing:
 
-    mds_clear_cpu_buffers()
+    x86_clear_cpu_buffers()
 
 Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
 Other than CFLAGS.ZF, this macro doesn't clobber any registers.
@@ -185,9 +185,9 @@ Mitigation points
    idle clearing would be a window dressing exercise and is therefore not
    activated.
 
-   The invocation is controlled by the static key mds_idle_clear which is
-   switched depending on the chosen mitigation mode and the SMT state of
-   the system.
+   The invocation is controlled by the static key cpu_buf_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of the
+   system.
 
    The buffer clear is only invoked before entering the C-State to prevent
    that stale data from the idling CPU from spilling to the Hyper-Thread
diff --git linux-libre-6.12-gnu/Documentation/bpf/bpf_devel_QA.rst linux-libre-6.12.38-gnu/Documentation/bpf/bpf_devel_QA.rst
index de27e1620821..0acb4c9b8d90 100644
--- linux-libre-6.12-gnu/Documentation/bpf/bpf_devel_QA.rst
+++ linux-libre-6.12.38-gnu/Documentation/bpf/bpf_devel_QA.rst
@@ -382,6 +382,14 @@ In case of new BPF instructions, once the changes have been accepted
 into the Linux kernel, please implement support into LLVM's BPF back
 end. See LLVM_ section below for further information.
 
+Q: What "BPF_INTERNAL" symbol namespace is for?
+-----------------------------------------------
+A: Symbols exported as BPF_INTERNAL can only be used by BPF infrastructure
+like preload kernel modules with light skeleton. Most symbols outside
+of BPF_INTERNAL are not expected to be used by code outside of BPF either.
+Symbols may lack the designation because they predate the namespaces,
+or due to an oversight.
+
 Stable submission
 =================
 
diff --git linux-libre-6.12-gnu/Documentation/core-api/symbol-namespaces.rst linux-libre-6.12.38-gnu/Documentation/core-api/symbol-namespaces.rst
index 12e4aecdae94..cca94469fa41 100644
--- linux-libre-6.12-gnu/Documentation/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.38-gnu/Documentation/core-api/symbol-namespaces.rst
@@ -28,6 +28,9 @@ kernel. As of today, modules that make use of symbols exported into namespaces,
 are required to import the namespace. Otherwise the kernel will, depending on
 its configuration, reject loading the module or warn about a missing import.
 
+Additionally, it is possible to put symbols into a module namespace, strictly
+limiting which modules are allowed to use these symbols.
+
 2. How to define Symbol Namespaces
 ==================================
 
@@ -68,7 +71,7 @@ is to define the default namespace in the ``Makefile`` of the subsystem. E.g. to
 export all symbols defined in usb-common into the namespace USB_COMMON, add a
 line like this to drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 That will affect all EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL() statements. A
 symbol exported with EXPORT_SYMBOL_NS() while this definition is present, will
@@ -79,11 +82,27 @@ A second option to define the default namespace is directly in the compilation
 unit as preprocessor statement. The above example would then read::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 within the corresponding compilation unit before any EXPORT_SYMBOL macro is
 used.
 
+2.3 Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
+===================================================
+
+Symbols exported using this macro are put into a module namespace. This
+namespace cannot be imported.
+
+The macro takes a comma separated list of module names, allowing only those
+modules to access this symbol. Simple tail-globs are supported.
+
+For example:
+
+  EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
+
+will limit usage of this symbol to modules whoes name matches the given
+patterns.
+
 3. How to use Symbols exported in Namespaces
 ============================================
 
@@ -155,3 +174,6 @@ in-tree modules::
 You can also run nsdeps for external module builds. A typical usage is::
 
 	$ make -C <path_to_kernel_src> M=$PWD nsdeps
+
+Note: it will happily generate an import statement for the module namespace;
+which will not work and generates build and runtime failures.
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index 76163abed655..5ed40f21b8eb 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -55,8 +55,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 8eec07d9d454..07d21a3617f5 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -41,8 +41,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   qcom,dsb-element-bits:
     description:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index 68ea5f70b75f..ee7edc6f60e2 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -39,11 +39,11 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   reg-names:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   interrupts:
     maxItems: 1
@@ -134,6 +134,36 @@ allOf:
               - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,x1e80100-llcc
     then:
       properties:
@@ -148,6 +178,7 @@ allOf:
             - description: LLCC6 base register region
             - description: LLCC7 base register region
             - description: LLCC broadcast base register region
+            - description: LLCC broadcast AND register region
         reg-names:
           items:
             - const: llcc0_base
@@ -159,6 +190,7 @@ allOf:
             - const: llcc6_base
             - const: llcc7_base
             - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
 
   - if:
       properties:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 5e942bccf277..2b2041818a0a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
index ccb53c6b96c1..98c0800732ef 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx91-ccm
       - fsl,imx93-ccm
 
   reg:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index df20a3c9c744..ec89115c74e4 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -90,7 +90,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   "#sound-dai-cells":
     const: 0
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index b57ae6963e62..6b6f6762d122 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -97,7 +97,10 @@ properties:
 
   resets:
     items:
-      - description: module reset
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
 
   reset-names:
     items:
@@ -116,6 +119,13 @@ properties:
       - const: rx
       - const: tx
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
@@ -169,6 +179,18 @@ allOf:
       properties:
         power-domains: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index fc8b97f82077..41fe00034742 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -30,7 +30,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index e850a8894758..bb40bb9e036e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
index b68141264c0e..4d40e75b4e1e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -71,7 +71,7 @@ properties:
                 description:
                   Any lane can be inverted or not.
                 minItems: 1
-                maxItems: 2
+                maxItems: 3
 
             required:
               - data-lanes
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index bb81307dc11b..4fc78efaa550 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: /schemas/regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 58ae298cd2fc..23884b8184a9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 7c5ac5d2e880..f6884f6e59e7 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -170,7 +170,7 @@ allOf:
             const: renesas,r8a779h0-canfd
     then:
       patternProperties:
-        "^channel[5-7]$": false
+        "^channel[4-7]$": false
     else:
       if:
         not:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
index 5536c06139ca..24e863fdbdab 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -183,6 +183,13 @@ properties:
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
 
+  fsl,pps-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Specifies to which timer instance the PPS signal is routed.
+    enum: [0, 1, 2, 3]
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 898c1be2d6a4..f05aab2b1add 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -149,7 +149,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -178,7 +178,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -207,6 +207,7 @@ allOf:
       properties:
         clocks:
           minItems: 4
+          maxItems: 4
 
         clock-names:
           items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..bac4d0b51d8a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -58,8 +58,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
index 4dfb49b0e07f..f82a3c7e6c29 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -91,14 +91,17 @@ allOf:
   - if:
       properties:
         compatible:
-          # Match without "contains", to skip newer variants which are still
-          # compatible with samsung,exynos7-wakeup-eint
-          enum:
-            - samsung,s5pv210-wakeup-eint
-            - samsung,exynos4210-wakeup-eint
-            - samsung,exynos5433-wakeup-eint
-            - samsung,exynos7-wakeup-eint
-            - samsung,exynos7885-wakeup-eint
+          oneOf:
+            # Match without "contains", to skip newer variants which are still
+            # compatible with samsung,exynos7-wakeup-eint
+            - enum:
+                - samsung,exynos4210-wakeup-eint
+                - samsung,exynos7-wakeup-eint
+                - samsung,s5pv210-wakeup-eint
+            - contains:
+                enum:
+                  - samsung,exynos5433-wakeup-eint
+                  - samsung,exynos7885-wakeup-eint
     then:
       properties:
         interrupts:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
index ec6115d3796b..5575c58357d6 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
@@ -27,22 +27,31 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    const: 3
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: ext
 
 required:
   - reg
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
 examples:
   - |
     pwm@44b00000 {
-       compatible = "adi,axi-pwmgen-2.00.a";
-       reg = <0x44b00000 0x1000>;
-       clocks = <&spi_clk>;
-       #pwm-cells = <2>;
+        compatible = "adi,axi-pwmgen-2.00.a";
+        reg = <0x44b00000 0x1000>;
+        clocks = <&fpga_clk>, <&spi_clk>;
+        clock-names = "axi", "ext";
+        #pwm-cells = <3>;
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
index 119de3d7f9dd..44548a9da158 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -35,8 +35,8 @@ additionalProperties: false
 examples:
   - |
     pwm: pwm@f0408000 {
-       compatible = "brcm,bcm7038-pwm";
-       reg = <0xf0408000 0x28>;
-       #pwm-cells = <2>;
-       clocks = <&upg_fixed>;
+        compatible = "brcm,bcm7038-pwm";
+        reg = <0xf0408000 0x28>;
+        #pwm-cells = <2>;
+        clocks = <&upg_fixed>;
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
index e86c8053b366..fd785da5d3d7 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
@@ -43,9 +43,9 @@ examples:
     #include <dt-bindings/clock/bcm281xx.h>
 
     pwm@3e01a000 {
-       compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-       reg = <0x3e01a000 0xcc>;
-       clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
-       #pwm-cells = <3>;
+        compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+        reg = <0x3e01a000 0xcc>;
+        clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+        #pwm-cells = <3>;
     };
 ...
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
index 6327bb2f6ee0..698266c09e25 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -33,7 +33,7 @@ patternProperties:
 
   "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
     type: object
-    $ref: fixed-regulator.yaml#
+    $ref: regulator.yaml#
     unevaluatedProperties: false
     description:
       Properties for single fixed LDO regulator.
@@ -112,7 +112,6 @@ examples:
           regulator-enable-ramp-delay = <220>;
         };
         mt6357_vfe28_reg: ldo-vfe28 {
-          compatible = "regulator-fixed";
           regulator-name = "vfe28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
@@ -125,14 +124,12 @@ examples:
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf18_reg: ldo-vrf18 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf12_reg: ldo-vrf12 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf12";
           regulator-min-microvolt = <1200000>;
           regulator-max-microvolt = <1200000>;
@@ -157,14 +154,12 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn28_reg: ldo-vcn28 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn18_reg: ldo-vcn18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -183,7 +178,6 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcamio_reg: ldo-vcamio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcamio";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -212,28 +206,24 @@ examples:
           regulator-always-on;
         };
         mt6357_vaux18_reg: ldo-vaux18 {
-          compatible = "regulator-fixed";
           regulator-name = "vaux18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vaud28_reg: ldo-vaud28 {
-          compatible = "regulator-fixed";
           regulator-name = "vaud28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio28_reg: ldo-vio28 {
-          compatible = "regulator-fixed";
           regulator-name = "vio28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio18_reg: ldo-vio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vio18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index cd4aa27218a1..fa6743bb269d 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -35,10 +35,6 @@ properties:
         $ref: regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          regulator-compatible:
-            pattern: "^vbuck[1-4]$"
-
     additionalProperties: false
 
 required:
@@ -56,7 +52,6 @@ examples:
 
       regulators {
         vbuck1 {
-          regulator-compatible = "vbuck1";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
@@ -64,7 +59,6 @@ examples:
         };
 
         vbuck3 {
-          regulator-compatible = "vbuck3";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index f2fd2df68a9e..b7241ce975b9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -22,7 +22,7 @@ description:
   Each sub-node is identified using the node's name, with valid values listed
   for each of the pmics below.
 
-  For mp5496, s1, s2
+  For mp5496, s1, s2, l2, l5
 
   For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index 692aa05500fd..6ba0325039be 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-high:
     description: drive RTS high when sending (this is the default).
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
index 31295be91013..234089b5954d 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Layerscape Reset Registers Module
 
 maintainers:
-  - Frank Li
+  - Frank Li <Frank.Li@nxp.com>
 
 description:
   Reset Module includes chip reset, service processor control and Reset Control
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
index de0b4ae740ff..a975bce59975 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -50,7 +50,7 @@ required:
   - compatible
 
 allOf:
-  - $ref: reserved-memory.yaml
+  - $ref: /schemas/reserved-memory/reserved-memory.yaml
 
 unevaluatedProperties: false
 
@@ -61,7 +61,7 @@ examples:
         #size-cells = <2>;
 
         qman-fqd {
-            compatible = "shared-dma-pool";
+            compatible = "fsl,qman-fqd";
             size = <0 0x400000>;
             alignment = <0 0x400000>;
             no-map;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
index 23d411fc4200..128698630c86 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
index 13f09f1bc800..0a698798c22b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
@@ -51,7 +51,7 @@ properties:
     description: Power supply for AVDD, providing 1.8V.
 
   cpvdd-supply:
-    description: Power supply for CPVDD, providing 3.5V.
+    description: Power supply for CPVDD, providing 1.8V.
 
   hp-detect-gpios:
     description: 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
index e44e88d993d0..e802e9ac975b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -14,9 +14,22 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - usb4b4,6504
-      - usb4b4,6506
+    oneOf:
+      - enum:
+          - usb4b4,6504
+          - usb4b4,6506
+      - items:
+          - enum:
+              - usb4b4,6500
+              - usb4b4,6508
+          - const: usb4b4,6504
+      - items:
+          - enum:
+              - usb4b4,6502
+              - usb4b4,6503
+              - usb4b4,6507
+              - usb4b4,650a
+          - const: usb4b4,6506
 
   reg: true
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b320a39de7fe..af9a8d43b247 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.12.38-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -581,6 +581,8 @@ patternProperties:
     description: GlobalTop Technology, Inc.
   "^gmt,.*":
     description: Global Mixed-mode Technology, Inc.
+  "^gocontroll,.*":
+    description: GOcontroll Modular Embedded Electronics B.V.
   "^goldelico,.*":
     description: Golden Delicious Computers GmbH & Co. KG
   "^goodix,.*":
@@ -844,6 +846,8 @@ patternProperties:
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^liontron,.*":
+    description: Shenzhen Liontron Technology Co., Ltd
   "^liteon,.*":
     description: LITE-ON Technology Corp.
   "^litex,.*":
@@ -1013,6 +1017,8 @@ patternProperties:
     description: Shanghai Neardi Technology Co., Ltd.
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
diff --git linux-libre-6.12-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst linux-libre-6.12.38-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
index bba40158dd5c..8e50b900d51c 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
+++ linux-libre-6.12.38-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
@@ -272,7 +272,7 @@ The available attributes are:
       echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
 
     Async mode without interrupts (caller must poll) can be enabled by
-    writing 'async' to it::
+    writing 'async' to it (please see Caveat)::
 
       echo async > /sys/bus/dsa/drivers/crypto/sync_mode
 
@@ -283,6 +283,13 @@ The available attributes are:
 
     The default mode is 'sync'.
 
+    Caveat: since the only mechanism that iaa_crypto currently implements
+    for async polling without interrupts is via the 'sync' mode as
+    described earlier, writing 'async' to
+    '/sys/bus/dsa/drivers/crypto/sync_mode' will internally enable the
+    'sync' mode. This is to ensure correct iaa_crypto behavior until true
+    async polling without interrupts is enabled in iaa_crypto.
+
 .. _iaa_default_config:
 
 IAA Default Configuration
diff --git linux-libre-6.12-gnu/Documentation/driver-api/serial/driver.rst linux-libre-6.12.38-gnu/Documentation/driver-api/serial/driver.rst
index 84b43061c11b..60434f2b0286 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/serial/driver.rst
+++ linux-libre-6.12.38-gnu/Documentation/driver-api/serial/driver.rst
@@ -103,4 +103,4 @@ Some helpers are provided in order to set/get modem control lines via GPIO.
 .. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c
    :identifiers: mctrl_gpio_init mctrl_gpio_free mctrl_gpio_to_gpiod
            mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms
-           mctrl_gpio_disable_ms
+           mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync
diff --git linux-libre-6.12-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.12.38-gnu/Documentation/filesystems/mount_api.rst
index 317934c9e8fc..d92c276f1575 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.12.38-gnu/Documentation/filesystems/mount_api.rst
@@ -770,7 +770,8 @@ process the parameters it is given.
 
    * ::
 
-       bool fs_validate_description(const struct fs_parameter_description *desc);
+       bool fs_validate_description(const char *name,
+                                    const struct fs_parameter_description *desc);
 
      This performs some validation checks on a parameter description.  It
      returns true if the description is good and false if it is not.  It will
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-6.12.38-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 8d8b53e96bcf..ccb4b153e6f2 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-6.12.38-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -12,11 +12,14 @@ ACPI in general allows referring to device objects in the tree only.
 Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
-A reference consist of the device object name followed by one or more
-hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
-data extension node which is referred to by the key shall lie directly under
-the parent object i.e. either the device object or another hierarchical data
-extension node.
+A reference to a _DSD hierarchical data node is a string consisting of a
+device object reference followed by a dot (".") and a relative path to a data
+node object. Do not use non-string references as this will produce a copy of
+the hierarchical data node, not a reference!
+
+The hierarchical data extension node which is referred to shall be located
+directly under its parent object i.e. either the device object or another
+hierarchical data extension node [dsd-guide].
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
 "@" character and the number of the node in hexadecimal notation (without pre-
@@ -33,11 +36,9 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property contains a
-device object reference to DEV0 and under that device object, a
-hierarchical data extension key "node@1" referring to the NOD1 object
-and lastly, a hierarchical data extension key "anothernode" referring to
-the ANOD object which is also the final target node of the reference.
+In the ASL snippet below, the "reference" _DSD property contains a string
+reference to a hierarchical data extension node ANOD under DEV0 under the parent
+of DEV1. ANOD is also the final target node of the reference.
 ::
 
 	Device (DEV0)
@@ -76,10 +77,7 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () {
-			"reference", Package () {
-			    ^DEV0, "node@1", "anothernode"
-			}
+		    Package () { "reference", "^DEV0.ANOD" }
 		    },
 		}
 	    })
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst linux-libre-6.12.38-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
index b9dbfc73ed25..d6ae5ffa748c 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
+++ linux-libre-6.12.38-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
@@ -66,12 +66,9 @@ of that port shall be zero. Similarly, if a port may only have a single
 endpoint, the number of that endpoint shall be zero.
 
 The endpoint reference uses property extension with "remote-endpoint" property
-name followed by a reference in the same package. Such references consist of
-the remote device reference, the first package entry of the port data extension
-reference under the device and finally the first package entry of the endpoint
-data extension reference under the port. Individual references thus appear as::
+name followed by a string reference in the same package. [data-node-ref]::
 
-    Package() { device, "port@X", "endpoint@Y" }
+    "device.datanode"
 
 In the above example, "X" is the number of the port and "Y" is the number of
 the endpoint.
@@ -109,7 +106,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.ISP.EP40" },
 		}
 	    })
 	}
@@ -141,7 +138,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.I2C2.CAM0.EP00" },
 		}
 	    })
 	}
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst linux-libre-6.12.38-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
index 93db592c93c7..a97cd07d49be 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
+++ linux-libre-6.12.38-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
@@ -15,11 +15,6 @@ Referring to LEDs in Device tree is documented in [video-interfaces], in
 "flash-leds" property documentation. In short, LEDs are directly referred to by
 using phandles.
 
-While Device tree allows referring to any node in the tree [devicetree], in
-ACPI references are limited to device nodes only [acpi]. For this reason using
-the same mechanism on ACPI is not possible. A mechanism to refer to non-device
-ACPI nodes is documented in [data-node-ref].
-
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
 referring to the "reg" property of the relevant LED, is used to identify
@@ -74,7 +69,7 @@ omitted. ::
 			Package () {
 				Package () {
 					"flash-leds",
-					Package () { ^LED, "led@0", ^LED, "led@1" },
+					Package () { "^LED.LED0", "^LED.LED1" },
 				}
 			}
 		})
diff --git linux-libre-6.12-gnu/Documentation/gpu/drm-kms-helpers.rst linux-libre-6.12.38-gnu/Documentation/gpu/drm-kms-helpers.rst
index c3e58856f75b..96c03b9a644e 100644
--- linux-libre-6.12-gnu/Documentation/gpu/drm-kms-helpers.rst
+++ linux-libre-6.12.38-gnu/Documentation/gpu/drm-kms-helpers.rst
@@ -230,6 +230,9 @@ Panel Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
    :export:
 
+.. kernel-doc:: drivers/gpu/drm/drm_panel_backlight_quirks.c
+   :export:
+
 Panel Self Refresh Helper Reference
 ===================================
 
diff --git linux-libre-6.12-gnu/Documentation/gpu/xe/index.rst linux-libre-6.12.38-gnu/Documentation/gpu/xe/index.rst
index 3f07aa3b5432..89bbdcccf8eb 100644
--- linux-libre-6.12-gnu/Documentation/gpu/xe/index.rst
+++ linux-libre-6.12.38-gnu/Documentation/gpu/xe/index.rst
@@ -16,6 +16,7 @@ DG2, etc is provided to prototype the driver.
    xe_migrate
    xe_cs
    xe_pm
+   xe_gt_freq
    xe_pcode
    xe_gt_mcr
    xe_wa
diff --git linux-libre-6.12-gnu/Documentation/gpu/xe/xe_gt_freq.rst linux-libre-6.12.38-gnu/Documentation/gpu/xe/xe_gt_freq.rst
new file mode 100644
index 000000000000..c0811200e327
--- /dev/null
+++ linux-libre-6.12.38-gnu/Documentation/gpu/xe/xe_gt_freq.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==========================
+Xe GT Frequency Management
+==========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :doc: Xe GT Frequency Management
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :internal:
diff --git linux-libre-6.12-gnu/Documentation/hwmon/dell-smm-hwmon.rst linux-libre-6.12.38-gnu/Documentation/hwmon/dell-smm-hwmon.rst
index 74905675d71f..5a4edb6565cf 100644
--- linux-libre-6.12-gnu/Documentation/hwmon/dell-smm-hwmon.rst
+++ linux-libre-6.12.38-gnu/Documentation/hwmon/dell-smm-hwmon.rst
@@ -32,12 +32,12 @@ Temperature sensors and fans can be queried and set via the standard
 =============================== ======= =======================================
 Name				Perm	Description
 =============================== ======= =======================================
-fan[1-3]_input                  RO      Fan speed in RPM.
-fan[1-3]_label                  RO      Fan label.
-fan[1-3]_min                    RO      Minimal Fan speed in RPM
-fan[1-3]_max                    RO      Maximal Fan speed in RPM
-fan[1-3]_target                 RO      Expected Fan speed in RPM
-pwm[1-3]                        RW      Control the fan PWM duty-cycle.
+fan[1-4]_input                  RO      Fan speed in RPM.
+fan[1-4]_label                  RO      Fan label.
+fan[1-4]_min                    RO      Minimal Fan speed in RPM
+fan[1-4]_max                    RO      Maximal Fan speed in RPM
+fan[1-4]_target                 RO      Expected Fan speed in RPM
+pwm[1-4]                        RW      Control the fan PWM duty-cycle.
 pwm1_enable                     WO      Enable or disable automatic BIOS fan
                                         control (not supported on all laptops,
                                         see below for details).
@@ -93,7 +93,7 @@ Again, when you find new codes, we'd be happy to have your patches!
 ---------------------------
 
 The driver also exports the fans as thermal cooling devices with
-``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
+``type`` set to ``dell-smm-fan[1-4]``. This allows for easy fan control
 using one of the thermal governors.
 
 Module parameters
diff --git linux-libre-6.12-gnu/Documentation/i2c/busses/i2c-i801.rst linux-libre-6.12.38-gnu/Documentation/i2c/busses/i2c-i801.rst
index c840b597912c..47e8ac5b7099 100644
--- linux-libre-6.12-gnu/Documentation/i2c/busses/i2c-i801.rst
+++ linux-libre-6.12.38-gnu/Documentation/i2c/busses/i2c-i801.rst
@@ -49,6 +49,7 @@ Supported adapters:
   * Intel Meteor Lake (SOC and PCH)
   * Intel Birch Stream (SOC)
   * Intel Arrow Lake (SOC)
+  * Intel Panther Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git linux-libre-6.12-gnu/Documentation/kbuild/makefiles.rst linux-libre-6.12.38-gnu/Documentation/kbuild/makefiles.rst
index 7964e0c245ae..81607ce40759 100644
--- linux-libre-6.12-gnu/Documentation/kbuild/makefiles.rst
+++ linux-libre-6.12.38-gnu/Documentation/kbuild/makefiles.rst
@@ -656,6 +656,20 @@ cc-cross-prefix
             endif
     endif
 
+$(RUSTC) support functions
+--------------------------
+
+rustc-min-version
+  rustc-min-version tests if the value of $(CONFIG_RUSTC_VERSION) is greater
+  than or equal to the provided value and evaluates to y if so.
+
+  Example::
+
+    rustflags-$(call rustc-min-version, 108500) := -Cfoo
+
+  In this example, rustflags-y will be assigned the value -Cfoo if
+  $(CONFIG_RUSTC_VERSION) is >= 1.85.0.
+
 $(LD) support functions
 -----------------------
 
diff --git linux-libre-6.12-gnu/Documentation/locking/seqlock.rst linux-libre-6.12.38-gnu/Documentation/locking/seqlock.rst
index bfda1a5fecad..ec6411d02ac8 100644
--- linux-libre-6.12-gnu/Documentation/locking/seqlock.rst
+++ linux-libre-6.12.38-gnu/Documentation/locking/seqlock.rst
@@ -153,7 +153,7 @@ Use seqcount_latch_t when the write side sections cannot be protected
 from interruption by readers. This is typically the case when the read
 side can be invoked from NMI handlers.
 
-Check `raw_write_seqcount_latch()` for more information.
+Check `write_seqcount_latch()` for more information.
 
 
 .. _seqlock_t:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/ethtool.yaml linux-libre-6.12.38-gnu/Documentation/netlink/specs/ethtool.yaml
index 6a050d755b9c..f6c5d8214c7e 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/ethtool.yaml
+++ linux-libre-6.12.38-gnu/Documentation/netlink/specs/ethtool.yaml
@@ -96,7 +96,12 @@ attribute-sets:
         name: bits
         type: nest
         nested-attributes: bitset-bits
-
+      -
+        name: value
+        type: binary
+      -
+        name: mask
+        type: binary
   -
     name: string
     attributes:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/ovs_vport.yaml linux-libre-6.12.38-gnu/Documentation/netlink/specs/ovs_vport.yaml
index 86ba9ac2a521..b538bb99ee9b 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/ovs_vport.yaml
+++ linux-libre-6.12.38-gnu/Documentation/netlink/specs/ovs_vport.yaml
@@ -123,12 +123,12 @@ attribute-sets:
 
 operations:
   name-prefix: ovs-vport-cmd-
+  fixed-header: ovs-header
   list:
     -
       name: new
       doc: Create a new OVS vport
       attribute-set: vport
-      fixed-header: ovs-header
       do:
         request:
           attributes:
@@ -141,7 +141,6 @@ operations:
       name: del
       doc: Delete existing OVS vport from a data path
       attribute-set: vport
-      fixed-header: ovs-header
       do:
         request:
           attributes:
@@ -152,7 +151,6 @@ operations:
       name: get
       doc: Get / dump OVS vport configuration and state
       attribute-set: vport
-      fixed-header: ovs-header
       do: &vport-get-op
         request:
           attributes:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/rt_link.yaml linux-libre-6.12.38-gnu/Documentation/netlink/specs/rt_link.yaml
index 0c4d5d40cae9..a048fc30389d 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/rt_link.yaml
+++ linux-libre-6.12.38-gnu/Documentation/netlink/specs/rt_link.yaml
@@ -1094,11 +1094,10 @@ attribute-sets:
       -
         name: prop-list
         type: nest
-        nested-attributes: link-attrs
+        nested-attributes: prop-list-link-attrs
       -
         name: alt-ifname
         type: string
-        multi-attr: true
       -
         name: perm-address
         type: binary
@@ -1137,6 +1136,13 @@ attribute-sets:
         name: dpll-pin
         type: nest
         nested-attributes: link-dpll-pin-attrs
+  -
+    name: prop-list-link-attrs
+    subset-of: link-attrs
+    attributes:
+      -
+        name: alt-ifname
+        multi-attr: true
   -
     name: af-spec-attrs
     attributes:
@@ -2071,9 +2077,10 @@ attribute-sets:
         type: u32
   -
     name: mctp-attrs
+    name-prefix: ifla-mctp-
     attributes:
       -
-        name: mctp-net
+        name: net
         type: u32
   -
     name: stats-attrs
@@ -2319,7 +2326,6 @@ operations:
             - min-mtu
             - max-mtu
             - prop-list
-            - alt-ifname
             - perm-address
             - proto-down-reason
             - parent-dev-name
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/tc.yaml linux-libre-6.12.38-gnu/Documentation/netlink/specs/tc.yaml
index b02d59a0349c..043f205bc1ae 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/tc.yaml
+++ linux-libre-6.12.38-gnu/Documentation/netlink/specs/tc.yaml
@@ -227,7 +227,7 @@ definitions:
         type: u8
         doc: log(P_max / (qth-max - qth-min))
       -
-        name: Scell_log
+        name: Scell-log
         type: u8
         doc: cell size for idle damping
       -
@@ -248,7 +248,7 @@ definitions:
         name: DPs
         type: u32
       -
-        name: def_DP
+        name: def-DP
         type: u32
       -
         name: grio
@@ -2017,7 +2017,8 @@ attribute-sets:
     attributes:
       -
         name: act
-        type: nest
+        type: indexed-array
+        sub-type: nest
         nested-attributes: tc-act-attrs
       -
         name: police
@@ -2250,7 +2251,8 @@ attribute-sets:
     attributes:
       -
         name: act
-        type: nest
+        type: indexed-array
+        sub-type: nest
         nested-attributes: tc-act-attrs
       -
         name: police
@@ -2745,7 +2747,7 @@ attribute-sets:
         type: u16
         byte-order: big-endian
       -
-        name: key-l2-tpv3-sid
+        name: key-l2tpv3-sid
         type: u32
         byte-order: big-endian
       -
@@ -3504,7 +3506,7 @@ attribute-sets:
         name: rate64
         type: u64
       -
-        name: prate4
+        name: prate64
         type: u64
       -
         name: burst
diff --git linux-libre-6.12-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.12.38-gnu/Documentation/networking/ip-sysctl.rst
index eacf8983e230..dcbb6f6caf6d 100644
--- linux-libre-6.12-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.12.38-gnu/Documentation/networking/ip-sysctl.rst
@@ -2170,6 +2170,12 @@ nexthop_compat_mode - BOOLEAN
 	understands the new API, this sysctl can be disabled to achieve full
 	performance benefits of the new API by disabling the nexthop expansion
 	and extraneous notifications.
+
+	Note that as a backward-compatible mode, dumping of modern features
+	might be incomplete or wrong. For example, resilient groups will not be
+	shown as such, but rather as just a list of next hops. Also weights that
+	do not fit into 8 bits will show incorrectly.
+
 	Default: true (backward compat mode)
 
 fib_notify_on_flag_change - INTEGER
diff --git linux-libre-6.12-gnu/Documentation/networking/iso15765-2.rst linux-libre-6.12.38-gnu/Documentation/networking/iso15765-2.rst
index 0e9d96074178..37ebb2c417cb 100644
--- linux-libre-6.12-gnu/Documentation/networking/iso15765-2.rst
+++ linux-libre-6.12.38-gnu/Documentation/networking/iso15765-2.rst
@@ -369,8 +369,8 @@ to their default.
 
   addr.can_family = AF_CAN;
   addr.can_ifindex = if_nametoindex("can0");
-  addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
-  addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
+  addr.can_addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
+  addr.can_addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
 
   ret = bind(s, (struct sockaddr *)&addr, sizeof(addr));
   if (ret < 0)
diff --git linux-libre-6.12-gnu/Documentation/networking/strparser.rst linux-libre-6.12.38-gnu/Documentation/networking/strparser.rst
index 6cab1f74ae05..7f623d1db72a 100644
--- linux-libre-6.12-gnu/Documentation/networking/strparser.rst
+++ linux-libre-6.12.38-gnu/Documentation/networking/strparser.rst
@@ -112,7 +112,7 @@ Functions
 Callbacks
 =========
 
-There are six callbacks:
+There are seven callbacks:
 
     ::
 
@@ -182,6 +182,13 @@ There are six callbacks:
     the length of the message. skb->len - offset may be greater
     then full_len since strparser does not trim the skb.
 
+    ::
+
+	int (*read_sock)(struct strparser *strp, read_descriptor_t *desc,
+                     sk_read_actor_t recv_actor);
+
+    The read_sock callback is used by strparser instead of
+    sock->ops->read_sock, if provided.
     ::
 
 	int (*read_sock_done)(struct strparser *strp, int err);
diff --git linux-libre-6.12-gnu/Documentation/power/runtime_pm.rst linux-libre-6.12.38-gnu/Documentation/power/runtime_pm.rst
index 53d1996460ab..12f429359a82 100644
--- linux-libre-6.12-gnu/Documentation/power/runtime_pm.rst
+++ linux-libre-6.12.38-gnu/Documentation/power/runtime_pm.rst
@@ -347,7 +347,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
   `int pm_runtime_resume_and_get(struct device *dev);`
     - run pm_runtime_resume(dev) and if successful, increment the device's
-      usage counter; return the result of pm_runtime_resume
+      usage counter; returns 0 on success (whether or not the device's
+      runtime PM status was already 'active') or the error code from
+      pm_runtime_resume() on failure.
 
   `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
diff --git linux-libre-6.12-gnu/Documentation/rust/coding-guidelines.rst linux-libre-6.12.38-gnu/Documentation/rust/coding-guidelines.rst
index 329b070a1d47..a2e326b42410 100644
--- linux-libre-6.12-gnu/Documentation/rust/coding-guidelines.rst
+++ linux-libre-6.12.38-gnu/Documentation/rust/coding-guidelines.rst
@@ -227,3 +227,149 @@ The equivalent in Rust may look like (ignoring documentation):
 That is, the equivalent of ``GPIO_LINE_DIRECTION_IN`` would be referred to as
 ``gpio::LineDirection::In``. In particular, it should not be named
 ``gpio::gpio_line_direction::GPIO_LINE_DIRECTION_IN``.
+
+
+Lints
+-----
+
+In Rust, it is possible to ``allow`` particular warnings (diagnostics, lints)
+locally, making the compiler ignore instances of a given warning within a given
+function, module, block, etc.
+
+It is similar to ``#pragma GCC diagnostic push`` + ``ignored`` + ``pop`` in C
+[#]_:
+
+.. code-block:: c
+
+	#pragma GCC diagnostic push
+	#pragma GCC diagnostic ignored "-Wunused-function"
+	static void f(void) {}
+	#pragma GCC diagnostic pop
+
+.. [#] In this particular case, the kernel's ``__{always,maybe}_unused``
+       attributes (C23's ``[[maybe_unused]]``) may be used; however, the example
+       is meant to reflect the equivalent lint in Rust discussed afterwards.
+
+But way less verbose:
+
+.. code-block:: rust
+
+	#[allow(dead_code)]
+	fn f() {}
+
+By that virtue, it makes it possible to comfortably enable more diagnostics by
+default (i.e. outside ``W=`` levels). In particular, those that may have some
+false positives but that are otherwise quite useful to keep enabled to catch
+potential mistakes.
+
+On top of that, Rust provides the ``expect`` attribute which takes this further.
+It makes the compiler warn if the warning was not produced. For instance, the
+following will ensure that, when ``f()`` is called somewhere, we will have to
+remove the attribute:
+
+.. code-block:: rust
+
+	#[expect(dead_code)]
+	fn f() {}
+
+If we do not, we get a warning from the compiler::
+
+	warning: this lint expectation is unfulfilled
+	 --> x.rs:3:10
+	  |
+	3 | #[expect(dead_code)]
+	  |          ^^^^^^^^^
+	  |
+	  = note: `#[warn(unfulfilled_lint_expectations)]` on by default
+
+This means that ``expect``\ s do not get forgotten when they are not needed, which
+may happen in several situations, e.g.:
+
+- Temporary attributes added while developing.
+
+- Improvements in lints in the compiler, Clippy or custom tools which may
+  remove a false positive.
+
+- When the lint is not needed anymore because it was expected that it would be
+  removed at some point, such as the ``dead_code`` example above.
+
+It also increases the visibility of the remaining ``allow``\ s and reduces the
+chance of misapplying one.
+
+Thus prefer ``expect`` over ``allow`` unless:
+
+- Conditional compilation triggers the warning in some cases but not others.
+
+  If there are only a few cases where the warning triggers (or does not
+  trigger) compared to the total number of cases, then one may consider using
+  a conditional ``expect`` (i.e. ``cfg_attr(..., expect(...))``). Otherwise,
+  it is likely simpler to just use ``allow``.
+
+- Inside macros, when the different invocations may create expanded code that
+  triggers the warning in some cases but not in others.
+
+- When code may trigger a warning for some architectures but not others, such
+  as an ``as`` cast to a C FFI type.
+
+As a more developed example, consider for instance this program:
+
+.. code-block:: rust
+
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+Here, function ``g()`` is dead code if ``CONFIG_X`` is not set. Can we use
+``expect`` here?
+
+.. code-block:: rust
+
+	#[expect(dead_code)]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+This would emit a lint if ``CONFIG_X`` is set, since it is not dead code in that
+configuration. Therefore, in cases like this, we cannot use ``expect`` as-is.
+
+A simple possibility is using ``allow``:
+
+.. code-block:: rust
+
+	#[allow(dead_code)]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+An alternative would be using a conditional ``expect``:
+
+.. code-block:: rust
+
+	#[cfg_attr(not(CONFIG_X), expect(dead_code))]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+This would ensure that, if someone introduces another call to ``g()`` somewhere
+(e.g. unconditionally), then it would be spotted that it is not dead code
+anymore. However, the ``cfg_attr`` is more complex than a simple ``allow``.
+
+Therefore, it is likely that it is not worth using conditional ``expect``\ s when
+more than one or two configurations are involved or when the lint may be
+triggered due to non-local changes (such as ``dead_code``).
+
+For more information about diagnostics in Rust, please see:
+
+	https://doc.rust-lang.org/stable/reference/attributes/diagnostics.html
diff --git linux-libre-6.12-gnu/Documentation/rust/quick-start.rst linux-libre-6.12.38-gnu/Documentation/rust/quick-start.rst
index 2d107982c87b..ded0d0836aee 100644
--- linux-libre-6.12-gnu/Documentation/rust/quick-start.rst
+++ linux-libre-6.12.38-gnu/Documentation/rust/quick-start.rst
@@ -128,7 +128,7 @@ Rust standard library source
 ****************************
 
 The Rust standard library source is required because the build system will
-cross-compile ``core`` and ``alloc``.
+cross-compile ``core``.
 
 If ``rustup`` is being used, run::
 
diff --git linux-libre-6.12-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst linux-libre-6.12.38-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
index 17abc25ee4c1..6657f82c0101 100644
--- linux-libre-6.12-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.38-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
@@ -69,7 +69,7 @@ Per esempio per esportare tutti i simboli definiti in usb-common nello spazio
 dei nomi USB_COMMON, si può aggiungere la seguente linea in
 drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 Questo cambierà tutte le macro EXPORT_SYMBOL() ed EXPORT_SYMBOL_GPL(). Invece,
 un simbolo esportato con EXPORT_SYMBOL_NS() non verrà cambiato e il simbolo
@@ -79,7 +79,7 @@ Una seconda possibilità è quella di definire il simbolo di preprocessore
 direttamente nei file da compilare. L'esempio precedente diventerebbe::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 Questo va messo prima di un qualsiasi uso di EXPORT_SYMBOL.
 
diff --git linux-libre-6.12-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst linux-libre-6.12.38-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
index bb16f0611046..f3e73834f7d7 100644
--- linux-libre-6.12-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.38-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
@@ -66,7 +66,7 @@
 子系统的 ``Makefile`` 中定义默认命名空间。例如，如果要将usb-common中定义的所有符号导
 出到USB_COMMON命名空间，可以在drivers/usb/common/Makefile中添加这样一行::
 
-       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 这将影响所有 EXPORT_SYMBOL() 和 EXPORT_SYMBOL_GPL() 语句。当这个定义存在时，
 用EXPORT_SYMBOL_NS()导出的符号仍然会被导出到作为命名空间参数传递的命名空间中，
@@ -76,7 +76,7 @@
 成::
 
        #undef  DEFAULT_SYMBOL_NAMESPACE
-       #define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+       #define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 应置于相关编译单元中任何 EXPORT_SYMBOL 宏之前
 
diff --git linux-libre-6.12-gnu/Documentation/wmi/devices/msi-wmi-platform.rst linux-libre-6.12.38-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
index 31a136942892..73197b31926a 100644
--- linux-libre-6.12-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
+++ linux-libre-6.12.38-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
@@ -138,6 +138,10 @@ input data, the meaning of which depends on the subfeature being accessed.
 The output buffer contains a single byte which signals success or failure (``0x00`` on failure)
 and 31 bytes of output data, the meaning if which depends on the subfeature being accessed.
 
+.. note::
+   The ACPI control method responsible for handling the WMI method calls is not thread-safe.
+   This is a firmware bug that needs to be handled inside the driver itself.
+
 WMI method Get_EC()
 -------------------
 
diff --git linux-libre-6.12-gnu/MAINTAINERS linux-libre-6.12.38-gnu/MAINTAINERS
index b878ddc99f94..d0f18fdba068 100644
--- linux-libre-6.12-gnu/MAINTAINERS
+++ linux-libre-6.12.38-gnu/MAINTAINERS
@@ -701,7 +701,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-aimslab*
 
 AIO
@@ -809,7 +809,7 @@ ALLWINNER A10 CSI DRIVER
 M:	Maxime Ripard <mripard@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
 F:	drivers/media/platform/sunxi/sun4i-csi/
 
@@ -818,7 +818,7 @@ M:	Yong Deng <yong.deng@magewell.com>
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
 F:	drivers/media/platform/sunxi/sun6i-csi/
 
@@ -826,7 +826,7 @@ ALLWINNER A31 ISP DRIVER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
 F:	drivers/staging/media/sunxi/sun6i-isp/
 F:	drivers/staging/media/sunxi/sun6i-isp/uapi/sun6i-isp-config.h
@@ -835,7 +835,7 @@ ALLWINNER A31 MIPI CSI-2 BRIDGE DRIVER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
 F:	drivers/media/platform/sunxi/sun6i-mipi-csi2/
 
@@ -3348,7 +3348,7 @@ ASAHI KASEI AK7375 LENS VOICE COIL DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
 F:	drivers/media/i2c/ak7375.c
 
@@ -3765,7 +3765,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/dvb-usb-v2/az6007.c
 
 AZTECH FM RADIO RECEIVER DRIVER
@@ -3773,7 +3773,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-aztech*
 
 B43 WIRELESS DRIVER
@@ -3857,7 +3857,7 @@ M:	Fabien Dessenne <fabien.dessenne@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/bdisp
 
 BECKHOFF CX5020 ETHERCAT MASTER DRIVER
@@ -4865,7 +4865,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/bttv*
 F:	drivers/media/pci/bt8xx/bttv*
 
@@ -4979,13 +4979,13 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-cadet*
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/cafe_ccic*
 F:	drivers/media/platform/marvell/
 
@@ -5169,7 +5169,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
 F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
 F:	Documentation/driver-api/media/cec-core.rst
@@ -5186,7 +5186,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
@@ -5393,7 +5393,7 @@ CHRONTEL CH7322 CEC DRIVER
 M:	Joe Tessler <jrt@google.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
 F:	drivers/media/cec/i2c/ch7322.c
 
@@ -5582,7 +5582,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/cobalt/
 
 COCCINELLE/Semantic Patches (SmPL)
@@ -6026,7 +6026,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/cs3308.c
 
 CS5535 Audio ALSA driver
@@ -6057,7 +6057,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/cx18/
 F:	include/uapi/linux/ivtv*
 
@@ -6066,7 +6066,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/cx2341x*
 F:	include/media/drv-intf/cx2341x.h
 
@@ -6084,7 +6084,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/cx88*
 F:	drivers/media/pci/cx88/
 
@@ -6320,7 +6320,7 @@ DEINTERLACE DRIVERS FOR ALLWINNER H3
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
 F:	drivers/media/platform/sunxi/sun8i-di/
 
@@ -6447,7 +6447,7 @@ M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/delta
 
 DENALI NAND DRIVER
@@ -6855,7 +6855,7 @@ DONGWOON DW9714 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
 F:	drivers/media/i2c/dw9714.c
 
@@ -6863,13 +6863,13 @@ DONGWOON DW9719 LENS VOICE COIL DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/dw9719.c
 
 DONGWOON DW9768 LENS VOICE COIL DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
 F:	drivers/media/i2c/dw9768.c
 
@@ -6877,7 +6877,7 @@ DONGWOON DW9807 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
 F:	drivers/media/i2c/dw9807-vcm.c
 
@@ -7860,7 +7860,7 @@ DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/dsbr100.c
 
 DT3155 MEDIA DRIVER
@@ -7868,7 +7868,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/dt3155/
 
 DVB_USB_AF9015 MEDIA DRIVER
@@ -7913,7 +7913,7 @@ S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/dvb-usb/cxusb*
 
 DVB_USB_EC168 MEDIA DRIVER
@@ -8282,7 +8282,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/em28xx*
 F:	drivers/media/usb/em28xx/
 
@@ -8578,7 +8578,7 @@ EXTRON DA HD 4K PLUS CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/extron-da-hd-4k-plus/
 
 EXYNOS DP DRIVER
@@ -9400,7 +9400,7 @@ GALAXYCORE GC2145 SENSOR DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
 F:	drivers/media/i2c/gc2145.c
 
@@ -9448,7 +9448,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-gemtek*
 
 GENERIC ARCHITECTURE TOPOLOGY
@@ -9830,56 +9830,56 @@ GS1662 VIDEO SERIALIZER
 M:	Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/spi/gs1662.c
 
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/finepix.c
 
 GSPCA GL860 SUBDRIVER
 M:	Olivier Lorin <o.lorin@laposte.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/gl860/
 
 GSPCA M5602 SUBDRIVER
 M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/pac207.c
 
 GSPCA SN9C20X SUBDRIVER
 M:	Brian Johnson <brijohn@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/sn9c20x.c
 
 GSPCA T613 SUBDRIVER
 M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/
 
 GTP (GPRS Tunneling Protocol)
@@ -9996,7 +9996,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/hdpvr/
 
 HEWLETT PACKARD ENTERPRISE ILO CHIF DRIVER
@@ -10503,7 +10503,7 @@ M:	Jean-Christophe Trotin <jean-christophe.trotin@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/hva
 
 HWPOISON MEMORY FAILURE HANDLING
@@ -10531,7 +10531,7 @@ HYNIX HI556 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/hi556.c
 
 HYNIX HI846 SENSOR DRIVER
@@ -11502,7 +11502,7 @@ M:	Dan Scally <djrscally@gmail.com>
 R:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
 F:	drivers/media/pci/intel/ipu3/
 
@@ -11523,7 +11523,7 @@ M:	Bingbu Cao <bingbu.cao@intel.com>
 R:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/ipu6-isys.rst
 F:	drivers/media/pci/intel/ipu6/
 
@@ -12036,7 +12036,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-isa*
 
 ISAPNP
@@ -12138,7 +12138,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/ivtv*
 F:	drivers/media/pci/ivtv/
 F:	include/uapi/linux/ivtv*
@@ -12286,7 +12286,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-keene*
 
 KERNEL AUTOMOUNTER
@@ -13573,7 +13573,7 @@ MA901 MASTERKIT USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
@@ -13868,7 +13868,7 @@ MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/max2175.txt
 F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
@@ -14048,7 +14048,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-maxiradio*
 
 MAXLINEAR ETHERNET PHY DRIVER
@@ -14131,7 +14131,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://www.linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/mc/
 F:	include/media/media-*.h
 F:	include/uapi/linux/media.h
@@ -14140,7 +14140,7 @@ MEDIA DRIVER FOR FREESCALE IMX PXP
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/nxp/imx-pxp.[ch]
 
 MEDIA DRIVERS FOR ASCOT2E
@@ -14149,7 +14149,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/ascot2e*
 
 MEDIA DRIVERS FOR CXD2099AR CI CONTROLLERS
@@ -14157,7 +14157,7 @@ M:	Jasmin Jessich <jasmin@anw.at>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2099*
 
 MEDIA DRIVERS FOR CXD2841ER
@@ -14166,7 +14166,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2841er*
 
 MEDIA DRIVERS FOR CXD2880
@@ -14174,7 +14174,7 @@ M:	Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2880/*
 F:	drivers/media/spi/cxd2880*
 
@@ -14182,7 +14182,7 @@ MEDIA DRIVERS FOR DIGITAL DEVICES PCIE DEVICES
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/ddbridge/*
 
 MEDIA DRIVERS FOR FREESCALE IMX
@@ -14190,7 +14190,7 @@ M:	Steve Longerbeam <slongerbeam@gmail.com>
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx.rst
 F:	Documentation/devicetree/bindings/media/imx.txt
 F:	drivers/staging/media/imx/
@@ -14204,7 +14204,7 @@ M:	Martin Kepplinger <martin.kepplinger@puri.sm>
 R:	Purism Kernel Team <kernel@puri.sm>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx7.rst
 F:	Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -14219,7 +14219,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/helene*
 
 MEDIA DRIVERS FOR HORUS3A
@@ -14228,7 +14228,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/horus3a*
 
 MEDIA DRIVERS FOR LNBH25
@@ -14237,14 +14237,14 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/lnbh25*
 
 MEDIA DRIVERS FOR MXL5XX TUNER DEMODULATORS
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/mxl5xx*
 
 MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
@@ -14253,7 +14253,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/netup_unidvb/*
 
 MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
@@ -14261,7 +14261,7 @@ M:	Dmitry Osipenko <digetx@gmail.com>
 L:	linux-media@vger.kernel.org
 L:	linux-tegra@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
 F:	drivers/media/platform/nvidia/tegra-vde/
 
@@ -14270,7 +14270,7 @@ M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,ceu.yaml
 F:	drivers/media/platform/renesas/renesas-ceu.c
 F:	include/media/drv-intf/renesas-ceu.h
@@ -14280,7 +14280,7 @@ M:	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,drif.yaml
 F:	drivers/media/platform/renesas/rcar_drif.c
 
@@ -14289,7 +14289,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,fcp.yaml
 F:	drivers/media/platform/renesas/rcar-fcp.c
 F:	include/media/rcar-fcp.h
@@ -14299,7 +14299,7 @@ M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,fdp1.yaml
 F:	drivers/media/platform/renesas/rcar_fdp1.c
 
@@ -14308,7 +14308,7 @@ M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
 F:	Documentation/devicetree/bindings/media/renesas,isp.yaml
 F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -14322,7 +14322,7 @@ M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,vsp1.yaml
 F:	drivers/media/platform/renesas/vsp1/
 
@@ -14330,14 +14330,14 @@ MEDIA DRIVERS FOR ST STV0910 DEMODULATOR ICs
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/stv0910*
 
 MEDIA DRIVERS FOR ST STV6111 TUNER ICs
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/stv6111*
 
 MEDIA DRIVERS FOR STM32 - DCMI / DCMIPP
@@ -14345,7 +14345,7 @@ M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
 F:	drivers/media/platform/st/stm32/stm32-dcmi.c
@@ -14357,7 +14357,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/
 F:	Documentation/devicetree/bindings/media/
 F:	Documentation/driver-api/media/
@@ -14933,7 +14933,7 @@ L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
 W:	http://linux-meson.com/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
@@ -14943,7 +14943,7 @@ M:	Neil Armstrong <neil.armstrong@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
 F:	drivers/media/platform/amlogic/meson-ge2d/
 
@@ -14959,7 +14959,7 @@ M:	Neil Armstrong <neil.armstrong@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
 F:	drivers/staging/media/meson/vdec/
 
@@ -15557,7 +15557,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-miropcm20*
 
 MITSUMI MM8013 FG DRIVER
@@ -15709,7 +15709,7 @@ MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-mr800.c
 
 MRF24J40 IEEE 802.15.4 RADIO DRIVER
@@ -15776,7 +15776,7 @@ MT9M114 ONSEMI SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
 F:	drivers/media/i2c/mt9m114.c
 
@@ -15784,7 +15784,7 @@ MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
@@ -15793,7 +15793,7 @@ MT9T112 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/mt9t112.c
 F:	include/media/i2c/mt9t112.h
 
@@ -15801,7 +15801,7 @@ MT9V032 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
 F:	include/media/i2c/mt9v032.h
@@ -15810,7 +15810,7 @@ MT9V111 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
 F:	drivers/media/i2c/mt9v111.c
 
@@ -17005,13 +17005,13 @@ OMNIVISION OV01A10 SENSOR DRIVER
 M:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov01a10.c
 
 OMNIVISION OV02A10 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
 F:	drivers/media/i2c/ov02a10.c
 
@@ -17019,28 +17019,28 @@ OMNIVISION OV08D10 SENSOR DRIVER
 M:	Jimmy Su <jimmy.su@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov08d10.c
 
 OMNIVISION OV08X40 SENSOR DRIVER
 M:	Jason Chen <jason.z.chen@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov08x40.c
 
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov13858.c
 
 OMNIVISION OV13B10 SENSOR DRIVER
 M:	Arec Kao <arec.kao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov13b10.c
 
 OMNIVISION OV2680 SENSOR DRIVER
@@ -17048,7 +17048,7 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>
 M:	Hans de Goede <hansg@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
 F:	drivers/media/i2c/ov2680.c
 
@@ -17056,7 +17056,7 @@ OMNIVISION OV2685 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
 F:	drivers/media/i2c/ov2685.c
 
@@ -17066,14 +17066,14 @@ R:	Sakari Ailus <sakari.ailus@linux.intel.com>
 R:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov2740.c
 
 OMNIVISION OV4689 SENSOR DRIVER
 M:	Mikhail Rudenko <mike.rudenko@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
 F:	drivers/media/i2c/ov4689.c
 
@@ -17081,7 +17081,7 @@ OMNIVISION OV5640 SENSOR DRIVER
 M:	Steve Longerbeam <slongerbeam@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov5640.c
 
 OMNIVISION OV5647 SENSOR DRIVER
@@ -17089,7 +17089,7 @@ M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
 F:	drivers/media/i2c/ov5647.c
 
@@ -17097,7 +17097,7 @@ OMNIVISION OV5670 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
 F:	drivers/media/i2c/ov5670.c
 
@@ -17105,7 +17105,7 @@ OMNIVISION OV5675 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
 F:	drivers/media/i2c/ov5675.c
 
@@ -17113,7 +17113,7 @@ OMNIVISION OV5693 SENSOR DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
 F:	drivers/media/i2c/ov5693.c
 
@@ -17121,21 +17121,21 @@ OMNIVISION OV5695 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov5695.c
 
 OMNIVISION OV64A40 SENSOR DRIVER
 M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
 F:	drivers/media/i2c/ov64a40.c
 
 OMNIVISION OV7670 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7670.txt
 F:	drivers/media/i2c/ov7670.c
 
@@ -17143,7 +17143,7 @@ OMNIVISION OV772x SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
 F:	drivers/media/i2c/ov772x.c
 F:	include/media/i2c/ov772x.h
@@ -17151,7 +17151,7 @@ F:	include/media/i2c/ov772x.h
 OMNIVISION OV7740 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
 F:	drivers/media/i2c/ov7740.c
 
@@ -17159,7 +17159,7 @@ OMNIVISION OV8856 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml
 F:	drivers/media/i2c/ov8856.c
 
@@ -17168,7 +17168,7 @@ M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
 M:	Nicholas Roth <nicholas@rothemail.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
 F:	drivers/media/i2c/ov8858.c
 
@@ -17176,7 +17176,7 @@ OMNIVISION OV9282 SENSOR DRIVER
 M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
 F:	drivers/media/i2c/ov9282.c
 
@@ -17192,7 +17192,7 @@ R:	Akinobu Mita <akinobu.mita@gmail.com>
 R:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov9650.txt
 F:	drivers/media/i2c/ov9650.c
 
@@ -17201,7 +17201,7 @@ M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 R:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov9734.c
 
 ONBOARD USB HUB DRIVER
@@ -17503,7 +17503,7 @@ F:	include/uapi/linux/ppdev.h
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
 R:	Ajay Kaher <ajay.kaher@broadcom.com>
-R:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+R:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	virtualization@lists.linux.dev
 L:	x86@kernel.org
@@ -18646,7 +18646,7 @@ PULSE8-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/pulse8/
 
 PURELIFI PLFXLC DRIVER
@@ -18661,7 +18661,7 @@ L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.isely.net/pvrusb2/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/pvrusb2*
 F:	drivers/media/usb/pvrusb2/
 
@@ -18669,7 +18669,7 @@ PWC WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/pwc/*
 F:	include/trace/events/pwc.h
 
@@ -19173,7 +19173,7 @@ R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/*venus*
 F:	drivers/media/platform/qcom/venus/
 
@@ -19218,14 +19218,14 @@ RADIOSHARK RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-shark.c
 
 RADIOSHARK2 RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-shark2.c
 F:	drivers/media/radio/radio-tea5777.c
 
@@ -19249,7 +19249,7 @@ RAINSHADOW-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/rainshadow/
 
 RALINK MIPS ARCHITECTURE
@@ -19333,7 +19333,7 @@ M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/rc-core.rst
 F:	Documentation/userspace-api/media/rc/
 F:	drivers/media/rc/
@@ -20077,7 +20077,7 @@ ROTATION DRIVER FOR ALLWINNER A83T
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
 F:	drivers/media/platform/sunxi/sun8i-rotate/
 
@@ -20175,6 +20175,7 @@ B:	https://github.com/Rust-for-Linux/linux/issues
 C:	zulip://rust-for-linux.zulipchat.com
 P:	https://rust-for-linux.com/contributing
 T:	git https://github.com/Rust-for-Linux/linux.git rust-next
+F:	.clippy.toml
 F:	Documentation/rust/
 F:	rust/
 F:	samples/rust/
@@ -20182,6 +20183,13 @@ F:	scripts/*rust*
 F:	tools/testing/selftests/rust/
 K:	\b(?i:rust)\b
 
+RUST [ALLOC]
+M:	Danilo Krummrich <dakr@kernel.org>
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+F:	rust/kernel/alloc.rs
+F:	rust/kernel/alloc/
+
 RXRPC SOCKETS (AF_RXRPC)
 M:	David Howells <dhowells@redhat.com>
 M:	Marc Dionne <marc.dionne@auristor.com>
@@ -20331,7 +20339,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/saa6588*
 
 SAA7134 VIDEO4LINUX DRIVER
@@ -20339,7 +20347,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/saa7134*
 F:	drivers/media/pci/saa7134/
 
@@ -20347,7 +20355,7 @@ SAA7146 VIDEO4LINUX-2 DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/saa7146/
 F:	drivers/media/pci/saa7146/
 F:	include/media/drv-intf/saa7146*
@@ -20965,7 +20973,7 @@ SHARP RJ54N1CB0C SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/rj54n1cb0c.c
 F:	include/media/i2c/rj54n1cb0c.h
 
@@ -21015,7 +21023,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/silabs,si470x.yaml
 F:	drivers/media/radio/si470x/radio-si470x-i2c.c
 
@@ -21024,7 +21032,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si470x/radio-si470x-common.c
 F:	drivers/media/radio/si470x/radio-si470x-usb.c
 F:	drivers/media/radio/si470x/radio-si470x.h
@@ -21034,7 +21042,7 @@ M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si4713/si4713.?
 
 SI4713 FM RADIO TRANSMITTER PLATFORM DRIVER
@@ -21042,7 +21050,7 @@ M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si4713/radio-platform-si4713.c
 
 SI4713 FM RADIO TRANSMITTER USB DRIVER
@@ -21050,7 +21058,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si4713/radio-usb-si4713.c
 
 SIANO DVB DRIVER
@@ -21058,7 +21066,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/siano/
 F:	drivers/media/mmc/siano/
 F:	drivers/media/usb/siano/
@@ -21434,14 +21442,14 @@ SONY IMX208 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/imx208.c
 
 SONY IMX214 SENSOR DRIVER
 M:	Ricardo Ribalda <ribalda@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
 F:	drivers/media/i2c/imx214.c
 
@@ -21449,7 +21457,7 @@ SONY IMX219 SENSOR DRIVER
 M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
 F:	drivers/media/i2c/imx219.c
 
@@ -21457,7 +21465,7 @@ SONY IMX258 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
 F:	drivers/media/i2c/imx258.c
 
@@ -21465,7 +21473,7 @@ SONY IMX274 SENSOR DRIVER
 M:	Leon Luo <leonl@leopardimaging.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
 F:	drivers/media/i2c/imx274.c
 
@@ -21474,7 +21482,7 @@ M:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 M:	Umang Jain <umang.jain@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
 F:	drivers/media/i2c/imx283.c
 
@@ -21482,7 +21490,7 @@ SONY IMX290 SENSOR DRIVER
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
 F:	drivers/media/i2c/imx290.c
 
@@ -21491,7 +21499,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
 F:	drivers/media/i2c/imx296.c
 
@@ -21499,20 +21507,20 @@ SONY IMX319 SENSOR DRIVER
 M:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/imx319.c
 
 SONY IMX334 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
 F:	drivers/media/i2c/imx334.c
 
 SONY IMX335 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
 F:	drivers/media/i2c/imx335.c
 
@@ -21520,13 +21528,13 @@ SONY IMX355 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/imx355.c
 
 SONY IMX412 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
 F:	drivers/media/i2c/imx412.c
 
@@ -21534,7 +21542,7 @@ SONY IMX415 SENSOR DRIVER
 M:	Michael Riesch <michael.riesch@wolfvision.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
 F:	drivers/media/i2c/imx415.c
 
@@ -21823,7 +21831,7 @@ M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
 M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
 F:	drivers/media/i2c/st-mipid02.c
 
@@ -21859,7 +21867,7 @@ M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
 M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
 F:	Documentation/userspace-api/media/drivers/vgxy61.rst
 F:	drivers/media/i2c/vgxy61.c
@@ -22149,7 +22157,7 @@ STK1160 USB VIDEO CAPTURE DRIVER
 M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/stk1160/
 
 STM32 AUDIO (ASoC) DRIVERS
@@ -22586,7 +22594,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/tda18250*
 
 TDA18271 MEDIA DRIVER
@@ -22632,7 +22640,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/tda9840*
 
 TEA5761 TUNER DRIVER
@@ -22640,7 +22648,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/tea5761.*
 
 TEA5767 TUNER DRIVER
@@ -22648,7 +22656,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/tea5767.*
 
 TEA6415C MEDIA DRIVER
@@ -22656,7 +22664,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/tea6415c*
 
 TEA6420 MEDIA DRIVER
@@ -22664,7 +22672,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/tea6420*
 
 TEAM DRIVER
@@ -22952,7 +22960,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
@@ -23028,7 +23036,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 M:	Paul Elder <paul.elder@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
 F:	Documentation/userspace-api/media/drivers/thp7312.rst
 F:	drivers/media/i2c/thp7312.c
@@ -23615,7 +23623,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/tw68/
 
 TW686X VIDEO4LINUX DRIVER
@@ -23623,7 +23631,7 @@ M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/tw686x/
 
 U-BOOT ENVIRONMENT VARIABLES
@@ -24106,7 +24114,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.ideasonboard.org/uvc/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/uvc/
 F:	include/uapi/linux/uvcvideo.h
 
@@ -24212,7 +24220,7 @@ V4L2 ASYNC AND FWNODE FRAMEWORKS
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/v4l2-core/v4l2-async.c
 F:	drivers/media/v4l2-core/v4l2-fwnode.c
 F:	include/media/v4l2-async.h
@@ -24378,7 +24386,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vicodec/*
 
 VIDEO I2C POLLING DRIVER
@@ -24406,7 +24414,7 @@ M:	Daniel W. S. Almeida <dwlsalmeida@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vidtv/*
 
 VIMC VIRTUAL MEDIA CONTROLLER DRIVER
@@ -24415,7 +24423,7 @@ R:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vimc/*
 
 VIRT LIB
@@ -24663,7 +24671,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vivid/*
 
 VM SOCKETS (AF_VSOCK)
@@ -24721,7 +24729,7 @@ F:	drivers/misc/vmw_balloon.c
 
 VMWARE HYPERVISOR INTERFACE
 M:	Ajay Kaher <ajay.kaher@broadcom.com>
-M:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+M:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	virtualization@lists.linux.dev
 L:	x86@kernel.org
@@ -24749,7 +24757,7 @@ F:	drivers/scsi/vmw_pvscsi.h
 VMWARE VIRTUAL PTP CLOCK DRIVER
 M:	Nick Shi <nick.shi@broadcom.com>
 R:	Ajay Kaher <ajay.kaher@broadcom.com>
-R:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+R:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -25217,7 +25225,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/xc2028.*
 
 XDP (eXpress Data Path)
@@ -25358,8 +25366,7 @@ F:	include/xen/arm/swiotlb-xen.h
 F:	include/xen/swiotlb-xen.h
 
 XFS FILESYSTEM
-M:	Carlos Maiolino <cem@kernel.org>
-R:	Darrick J. Wong <djwong@kernel.org>
+M:	Darrick J. Wong <djwong@kernel.org>
 L:	linux-xfs@vger.kernel.org
 S:	Supported
 W:	http://xfs.org/
@@ -25441,7 +25448,7 @@ XILINX VIDEO IP CORES
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/xilinx/
 F:	drivers/media/platform/xilinx/
 F:	include/uapi/linux/xilinx-v4l2-controls.h
diff --git linux-libre-6.12-gnu/Makefile linux-libre-6.12.38-gnu/Makefile
index ecbcb046125a..bff75846e00c 100644
--- linux-libre-6.12-gnu/Makefile
+++ linux-libre-6.12.38-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 12
-SUBLEVEL = 0
+SUBLEVEL = 38
 EXTRAVERSION = -gnu
 NAME = Baby Opossum Posse
 
@@ -446,18 +446,22 @@ KBUILD_USERLDFLAGS := $(USERLDFLAGS)
 export rust_common_flags := --edition=2021 \
 			    -Zbinary_dep_depinfo=y \
 			    -Astable_features \
-			    -Dunsafe_op_in_unsafe_fn \
 			    -Dnon_ascii_idents \
+			    -Dunsafe_op_in_unsafe_fn \
+			    -Wmissing_docs \
 			    -Wrust_2018_idioms \
 			    -Wunreachable_pub \
-			    -Wmissing_docs \
-			    -Wrustdoc::missing_crate_level_docs \
 			    -Wclippy::all \
+			    -Wclippy::ignored_unit_patterns \
 			    -Wclippy::mut_mut \
 			    -Wclippy::needless_bitwise_bool \
-			    -Wclippy::needless_continue \
+			    -Aclippy::needless_lifetimes \
 			    -Wclippy::no_mangle_with_rust_abi \
-			    -Wclippy::dbg_macro
+			    -Wclippy::undocumented_unsafe_blocks \
+			    -Wclippy::unnecessary_safety_comment \
+			    -Wclippy::unnecessary_safety_doc \
+			    -Wrustdoc::missing_crate_level_docs \
+			    -Wrustdoc::unescaped_backticks
 
 KBUILD_HOSTCFLAGS   := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) \
 		       $(HOSTCFLAGS) -I $(srctree)/scripts/include
@@ -508,7 +512,7 @@ KGZIP		= gzip
 KBZIP2		= bzip2
 KLZOP		= lzop
 LZMA		= lzma
-LZ4		= lz4c
+LZ4		= lz4
 XZ		= xz
 ZSTD		= zstd
 
@@ -582,6 +586,9 @@ endif
 # Allows the usage of unstable features in stable compilers.
 export RUSTC_BOOTSTRAP := 1
 
+# Allows finding `.clippy.toml` in out-of-srctree builds.
+export CLIPPY_CONF_DIR := $(srctree)
+
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN
 export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
@@ -990,10 +997,6 @@ NOSTDINC_FLAGS += -nostdinc
 # perform bounds checking.
 KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
 
-#Currently, disable -Wstringop-overflow for GCC 11, globally.
-KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
-KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
-
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow
 
@@ -1005,6 +1008,12 @@ ifdef CONFIG_CC_IS_GCC
 KBUILD_CFLAGS   += -fconserve-stack
 endif
 
+# Ensure compilers do not transform certain loops into calls to wcslen()
+KBUILD_CFLAGS += -fno-builtin-wcslen
+
+# Ensure compilers do not transform certain loops into calls to wcslen()
+KBUILD_CFLAGS += -fno-builtin-wcslen
+
 # change __FILE__ to the relative path from the srctree
 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
@@ -1056,8 +1065,13 @@ LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 endif
 
 # Align the bit size of userspace programs with the kernel
-KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
-KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
+KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+
+# userspace programs are linked via the compiler, use the correct linker
+ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy)
+KBUILD_USERLDFLAGS += --ld-path=$(LD)
+endif
 
 # make the checker run with the right architecture
 CHECKFLAGS += --arch=$(ARCH)
@@ -1356,18 +1370,13 @@ ifneq ($(wildcard $(resolve_btfids_O)),)
 	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
 endif
 
-# Clear a bunch of variables before executing the submake
-ifeq ($(quiet),silent_)
-tools_silent=s
-endif
-
 tools/: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
+	$(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
 
 tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
+	$(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
 # ---------------------------------------------------------------------------
 # Kernel selftest
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/elf.h linux-libre-6.12.38-gnu/arch/alpha/include/asm/elf.h
index 4d7c46f50382..50c82187e60e 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/elf.h
+++ linux-libre-6.12.38-gnu/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -137,10 +137,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/pgtable.h linux-libre-6.12.38-gnu/arch/alpha/include/asm/pgtable.h
index 635f0a5f5bbd..02e8817a8921 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/pgtable.h
+++ linux-libre-6.12.38-gnu/arch/alpha/include/asm/pgtable.h
@@ -360,7 +360,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/processor.h linux-libre-6.12.38-gnu/arch/alpha/include/asm/processor.h
index 55bb1c09fd39..5dce5518a211 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/processor.h
+++ linux-libre-6.12.38-gnu/arch/alpha/include/asm/processor.h
@@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
diff --git linux-libre-6.12-gnu/arch/alpha/include/uapi/asm/ptrace.h linux-libre-6.12.38-gnu/arch/alpha/include/uapi/asm/ptrace.h
index 5ca45934fcbb..72ed913a910f 100644
--- linux-libre-6.12-gnu/arch/alpha/include/uapi/asm/ptrace.h
+++ linux-libre-6.12.38-gnu/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/asm-offsets.c linux-libre-6.12.38-gnu/arch/alpha/kernel/asm-offsets.c
index 4cfeae42c79a..e9dad60b147f 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/asm-offsets.c
+++ linux-libre-6.12.38-gnu/arch/alpha/kernel/asm-offsets.c
@@ -19,9 +19,13 @@ static void __used foo(void)
 	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
 	BLANK();
 
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
+	BLANK();
+
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
 	DEFINE(HAE_REG, offsetof(struct alpha_machine_vector, hae_register));
 }
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/entry.S linux-libre-6.12.38-gnu/arch/alpha/kernel/entry.S
index dd26062d75b3..f4d41b4538c2 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-6.12.38-gnu/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	64
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -198,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -214,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -227,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -235,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -382,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -399,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -409,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -417,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/osf_sys.c linux-libre-6.12.38-gnu/arch/alpha/kernel/osf_sys.c
index c0424de9e7cd..077a1407be6d 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/osf_sys.c
+++ linux-libre-6.12.38-gnu/arch/alpha/kernel/osf_sys.c
@@ -1211,8 +1211,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
@@ -1231,13 +1230,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
 		       unsigned long flags, vm_flags_t vm_flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/traps.c linux-libre-6.12.38-gnu/arch/alpha/kernel/traps.c
index a9a38c80c4a7..7004397937cf 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-6.12.38-gnu/arch/alpha/kernel/traps.c
@@ -649,7 +649,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
diff --git linux-libre-6.12-gnu/arch/alpha/mm/fault.c linux-libre-6.12.38-gnu/arch/alpha/mm/fault.c
index 8c9850437e67..a9816bbc9f34 100644
--- linux-libre-6.12-gnu/arch/alpha/mm/fault.c
+++ linux-libre-6.12.38-gnu/arch/alpha/mm/fault.c
@@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
diff --git linux-libre-6.12-gnu/arch/arc/Kconfig linux-libre-6.12.38-gnu/arch/arc/Kconfig
index 5b2488142041..69c6e71fa1e6 100644
--- linux-libre-6.12-gnu/arch/arc/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arc/Kconfig
@@ -297,7 +297,6 @@ config ARC_PAGE_SIZE_16K
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
 	select HAVE_PAGE_SIZE_4KB
-	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 endchoice
 
@@ -474,7 +473,8 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	depends on ISA_ARCV2
+	depends on MMU_V4
+	depends on !ARC_PAGE_SIZE_4K
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
 	help
diff --git linux-libre-6.12-gnu/arch/arc/Makefile linux-libre-6.12.38-gnu/arch/arc/Makefile
index 2390dd042e36..fb98478ed1ab 100644
--- linux-libre-6.12-gnu/arch/arc/Makefile
+++ linux-libre-6.12.38-gnu/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
diff --git linux-libre-6.12-gnu/arch/arc/include/asm/cmpxchg.h linux-libre-6.12.38-gnu/arch/arc/include/asm/cmpxchg.h
index 58045c898340..76f43db0890f 100644
--- linux-libre-6.12-gnu/arch/arc/include/asm/cmpxchg.h
+++ linux-libre-6.12.38-gnu/arch/arc/include/asm/cmpxchg.h
@@ -48,7 +48,7 @@
 									\
 	switch(sizeof((_p_))) {						\
 	case 1:								\
-		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
+		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *__force)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
 		break;							\
 	case 4:								\
 		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
diff --git linux-libre-6.12-gnu/arch/arc/kernel/devtree.c linux-libre-6.12.38-gnu/arch/arc/kernel/devtree.c
index 4c9e61457b2f..cc6ac7d128aa 100644
--- linux-libre-6.12-gnu/arch/arc/kernel/devtree.c
+++ linux-libre-6.12.38-gnu/arch/arc/kernel/devtree.c
@@ -62,7 +62,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
 
-	if (!early_init_dt_scan(dt))
+	if (!early_init_dt_scan(dt, __pa(dt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
diff --git linux-libre-6.12-gnu/arch/arc/net/bpf_jit_arcv2.c linux-libre-6.12.38-gnu/arch/arc/net/bpf_jit_arcv2.c
index 4458e409ca0a..6d989b6d88c6 100644
--- linux-libre-6.12-gnu/arch/arc/net/bpf_jit_arcv2.c
+++ linux-libre-6.12.38-gnu/arch/arc/net/bpf_jit_arcv2.c
@@ -2916,7 +2916,7 @@ bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond)
 	addendum = (cond == ARC_CC_AL) ? 0 : INSN_len_normal;
 	disp = get_displacement(curr_off + addendum, targ_off);
 
-	if (ARC_CC_AL)
+	if (cond == ARC_CC_AL)
 		return is_valid_far_disp(disp);
 	else
 		return is_valid_near_disp(disp);
diff --git linux-libre-6.12-gnu/arch/arm/Kconfig linux-libre-6.12.38-gnu/arch/arm/Kconfig
index 202397be76d8..d0040fb67c36 100644
--- linux-libre-6.12-gnu/arch/arm/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm/Kconfig
@@ -118,7 +118,7 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
-	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD)
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_CAN_USE_KEEP_IN_OVERLAY)
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
index c8ca8cb7f5c9..52ad95a2063a 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -280,8 +280,8 @@
 
 			reg_dcdc5: dcdc5 {
 				regulator-always-on;
-				regulator-min-microvolt = <1425000>;
-				regulator-max-microvolt = <1575000>;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
 				regulator-name = "vcc-dram";
 			};
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..14d175103106 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -284,12 +284,12 @@
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};
 
@@ -461,22 +461,20 @@
 			};
 
 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			pwm@23{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			adc@33 {
@@ -511,22 +509,20 @@
 			};
 
 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			pwm@23{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			adc@33 {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 6bf4241fe3b7..c78ed064d166 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
-#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -101,7 +100,3 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
-
-&xhci {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index e4e42af21ef3..c06d9f5e53c8 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -134,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -145,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -156,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -167,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -451,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -610,6 +608,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
 			/* DWC2 and this IP block share the same USB PHY,
 			 * enabling both at the same time results in lockups.
 			 * So keep this node disabled and let the bootloader
@@ -1177,6 +1176,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
index 53cb0c58f6d0..3da2daee0c84 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -124,19 +124,19 @@
 		};
 
 		port@1 {
-			label = "lan1";
+			label = "lan4";
 		};
 
 		port@2 {
-			label = "lan2";
+			label = "lan3";
 		};
 
 		port@3 {
-			label = "lan3";
+			label = "lan2";
 		};
 
 		port@4 {
-			label = "lan4";
+			label = "lan1";
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
index 6c666dc7ad23..01ec8c03686a 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -126,11 +126,11 @@
 
 	ports {
 		port@0 {
-			label = "lan4";
+			label = "wan";
 		};
 
 		port@1 {
-			label = "lan3";
+			label = "lan1";
 		};
 
 		port@2 {
@@ -138,11 +138,11 @@
 		};
 
 		port@3 {
-			label = "lan1";
+			label = "lan3";
 		};
 
 		port@4 {
-			label = "wan";
+			label = "lan4";
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index 6b6e77596ffa..b108265e9bde 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -440,7 +440,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -460,7 +460,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -480,7 +480,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi
index 814586abc297..fd7a89cc337d 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -308,7 +308,7 @@
 		clock-names = "spi", "wrap";
 	};
 
-	cir: cir@10013000 {
+	cir: ir-receiver@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index 15239834d886..35a933eec573 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,6 +197,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index 951a0c97d3c6..5933840bb8f7 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -514,6 +514,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	disable-wp;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index ce8baff6a9f4..e42e1a75a715 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -152,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 04a6d716ecaf..1e8fcb5d4700 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -186,6 +186,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -388,6 +389,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -439,6 +441,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -598,6 +601,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -649,6 +653,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -700,6 +705,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -751,6 +757,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -821,6 +828,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -891,6 +899,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -961,6 +970,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -1086,6 +1096,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -1137,6 +1148,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
index 62b7d9f9a926..c8b6318aaa83 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -64,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
index 45745915b2e1..454176ce6d3f 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -58,7 +58,7 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
 				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
@@ -84,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 86f14e2fd29f..6c057b506951 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -139,7 +139,7 @@
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
 				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index edf55760a5c1..1a63a6add439 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -108,6 +108,11 @@
 		};
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -236,10 +241,6 @@
 	status = "disabled";
 };
 
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -527,7 +528,6 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index 028961eb7108..91ca23a66bf3 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -135,6 +135,7 @@
 	lm75a: temperature-sensor@48 {
 		compatible = "national,lm75a";
 		reg = <0x48>;
+		vs-supply = <&vgen4_reg>;
 	};
 
 	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
index dd714d235d5f..b0bad0d1ba36 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
@@ -87,7 +87,7 @@
 			reg = <0x402c0000 0x4000>;
 			interrupts = <110>;
 			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
-				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_AHB_PODF>,
 				<&clks IMXRT1050_CLK_USDHC1>;
 			clock-names = "ipg", "ahb", "per";
 			bus-width = <4>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index ac7494ed633e..be87c396f05f 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -213,12 +213,6 @@
 		};
 	};
 
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
@@ -284,6 +278,40 @@
 		};
 	};
 
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+
+		clocks = <&rpmcc RPM_QDSS_CLK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				replicator_in: endpoint {
+					remote-endpoint = <&funnel_out>;
+				};
+			};
+		};
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out0: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out1: endpoint {
+					remote-endpoint = <&tpiu_in>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -305,9 +333,10 @@
 			pinctrl-0 = <&ps_hold_default_state>;
 		};
 
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
+		sfpb_mutex: hwmutex@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+			#hwlock-cells = <1>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -326,6 +355,8 @@
 				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
@@ -1532,39 +1563,6 @@
 			};
 		};
 
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
 		funnel@1a04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x1a04000 0x1000>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts linux-libre-6.12.38-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index 29ba098f5dd5..28e703e0f152 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -53,7 +53,7 @@
 
 			partition@4000000 {
 				label = "user1";
-				reg = <0x04000000 0x40000000>;
+				reg = <0x04000000 0x04000000>;
 			};
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
index ddad6497775b..ffb7233b063d 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
@@ -85,8 +85,8 @@
 
 			vddcpu: buck1 { /* VDD_CPU_1V2 */
 				regulator-name = "vddcpu";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
index 4f878ec102c1..fdc42a89bd37 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -129,7 +129,7 @@
 			reg = <0x4c001000 0x400>;
 			st,proc-id = <0>;
 			interrupts-extended =
-				<&exti 61 1>,
+				<&exti 61 IRQ_TYPE_LEVEL_HIGH>,
 				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "rx", "tx";
 			clocks = <&rcc IPCC>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index bb4f8a0b937f..abe2dfe70636 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -6,18 +6,6 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
-/ {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
 &adc {
 	status = "disabled";
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 171d7c7658fa..0fb4e55843b9 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	clk_ext_audio_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index b5bc53accd6b..01c693cc0344 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	led {
 		compatible = "gpio-leds";
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 74a11ccc5333..142d4a8731f8 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -14,6 +14,13 @@
 		ethernet1 = &ksz8851;
 		rtc0 = &hwrtc;
 		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index 6e67d99832ac..ba7fdaae9c6e 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;
 
 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;
 
 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
index 3661340009e7..8dca2bed941b 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
@@ -446,6 +446,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;
 
 	hsusb2_2_pins: hsusb2-2-pins {
@@ -459,6 +460,15 @@
 		>;
 	};
 
+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
 	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi linux-libre-6.12.38-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
index c3d79ecd56e3..c217094b50ab 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
@@ -72,6 +72,7 @@
 					 <1375000 1375000 1375000>;
 			/* only on am/dm37x with speed-binned bit set */
 			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
 		};
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm/crypto/Kconfig linux-libre-6.12.38-gnu/arch/arm/crypto/Kconfig
index 5ff49a5e9afc..f87e63b2212e 100644
--- linux-libre-6.12-gnu/arch/arm/crypto/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm/crypto/Kconfig
@@ -3,10 +3,12 @@
 menu "Accelerated Cryptographic Algorithms for CPU (arm)"
 
 config CRYPTO_CURVE25519_NEON
-	tristate "Public key crypto: Curve25519 (NEON)"
+	tristate
 	depends on KERNEL_MODE_NEON
+	select CRYPTO_KPP
 	select CRYPTO_LIB_CURVE25519_GENERIC
 	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+	default CRYPTO_LIB_CURVE25519_INTERNAL
 	help
 	  Curve25519 algorithm
 
@@ -45,9 +47,10 @@ config CRYPTO_NHPOLY1305_NEON
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_POLY1305_ARM
-	tristate "Hash functions: Poly1305 (NEON)"
+	tristate
 	select CRYPTO_HASH
 	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	default CRYPTO_LIB_POLY1305_INTERNAL
 	help
 	  Poly1305 authenticator algorithm (RFC7539)
 
@@ -212,9 +215,10 @@ config CRYPTO_AES_ARM_CE
 	  - ARMv8 Crypto Extensions
 
 config CRYPTO_CHACHA20_NEON
-	tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (NEON)"
+	tristate
 	select CRYPTO_SKCIPHER
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	default CRYPTO_LIB_CHACHA_INTERNAL
 	help
 	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
 	  stream cipher algorithms
diff --git linux-libre-6.12-gnu/arch/arm/include/asm/vmlinux.lds.h linux-libre-6.12.38-gnu/arch/arm/include/asm/vmlinux.lds.h
index d60f6e83a9f7..14811b4f48ec 100644
--- linux-libre-6.12-gnu/arch/arm/include/asm/vmlinux.lds.h
+++ linux-libre-6.12.38-gnu/arch/arm/include/asm/vmlinux.lds.h
@@ -34,6 +34,12 @@
 #define NOCROSSREFS
 #endif
 
+#ifdef CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY
+#define OVERLAY_KEEP(x)		KEEP(x)
+#else
+#define OVERLAY_KEEP(x)		x
+#endif
+
 /* Set start/end symbol names to the LMA for the section */
 #define ARM_LMA(sym, section)						\
 	sym##_start = LOADADDR(section);				\
@@ -125,13 +131,13 @@
 	__vectors_lma = .;						\
 	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
 		.vectors {						\
-			*(.vectors)					\
+			OVERLAY_KEEP(*(.vectors))			\
 		}							\
 		.vectors.bhb.loop8 {					\
-			*(.vectors.bhb.loop8)				\
+			OVERLAY_KEEP(*(.vectors.bhb.loop8))		\
 		}							\
 		.vectors.bhb.bpiall {					\
-			*(.vectors.bhb.bpiall)				\
+			OVERLAY_KEEP(*(.vectors.bhb.bpiall))		\
 		}							\
 	}								\
 	ARM_LMA(__vectors, .vectors);					\
diff --git linux-libre-6.12-gnu/arch/arm/kernel/devtree.c linux-libre-6.12.38-gnu/arch/arm/kernel/devtree.c
index fdb74e64206a..3b78966e750a 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/devtree.c
+++ linux-libre-6.12.38-gnu/arch/arm/kernel/devtree.c
@@ -200,7 +200,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
 
-	if (!dt_virt || !early_init_dt_verify(dt_virt))
+	if (!dt_virt || !early_init_dt_verify(dt_virt, __pa(dt_virt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
diff --git linux-libre-6.12-gnu/arch/arm/kernel/entry-armv.S linux-libre-6.12.38-gnu/arch/arm/kernel/entry-armv.S
index 1dfae1af8e31..ef6a657c8d13 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/entry-armv.S
+++ linux-libre-6.12.38-gnu/arch/arm/kernel/entry-armv.S
@@ -25,6 +25,7 @@
 #include <asm/tls.h>
 #include <asm/system_info.h>
 #include <asm/uaccess-asm.h>
+#include <asm/kasan_def.h>
 
 #include "entry-header.S"
 #include <asm/probes.h>
@@ -561,6 +562,13 @@ ENTRY(__switch_to)
 	@ entries covering the vmalloc region.
 	@
 	ldr	r2, [ip]
+#ifdef CONFIG_KASAN_VMALLOC
+	@ Also dummy read from the KASAN shadow memory for the new stack if we
+	@ are using KASAN
+	mov_l	r2, KASAN_SHADOW_OFFSET
+	add	r2, r2, ip, lsr #KASAN_SHADOW_SCALE_SHIFT
+	ldr	r2, [r2]
+#endif
 #endif
 
 	@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
diff --git linux-libre-6.12-gnu/arch/arm/mach-aspeed/Kconfig linux-libre-6.12.38-gnu/arch/arm/mach-aspeed/Kconfig
index 080019aa6fcd..fcf287edd0e5 100644
--- linux-libre-6.12-gnu/arch/arm/mach-aspeed/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm/mach-aspeed/Kconfig
@@ -2,7 +2,6 @@
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
 	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MFD_SYSCON
diff --git linux-libre-6.12-gnu/arch/arm/mach-at91/pm.c linux-libre-6.12.38-gnu/arch/arm/mach-at91/pm.c
index b9b995f8a36e..6c3e6aa22606 100644
--- linux-libre-6.12-gnu/arch/arm/mach-at91/pm.c
+++ linux-libre-6.12.38-gnu/arch/arm/mach-at91/pm.c
@@ -545,11 +545,12 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
-	unsigned char modified_gray_code[] = {
-		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
-		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
-		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
-		0x10, 0x11,
+	/* SYNOPSYS workaround to fix a bug in the calibration logic */
+	unsigned char modified_fix_code[] = {
+		0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18,
+		0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13,
+		0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14,
+		0x1e, 0x1f,
 	};
 	unsigned int tmp, index;
 	int i;
@@ -560,25 +561,25 @@ static int at91_suspend_finish(unsigned long val)
 		 * restore the ZQ0SR0 with the value saved here. But the
 		 * calibration is buggy and restoring some values from ZQ0SR0
 		 * is forbidden and risky thus we need to provide processed
-		 * values for these (modified gray code values).
+		 * values for these.
 		 */
 		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
 
 		/* Store pull-down output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF;
 
 		/* Store pull-up output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF;
 
 		/* Store pull-down on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF;
 
 		/* Store pull-up on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF;
 
 		/*
 		 * The 1st 8 words of memory might get corrupted in the process
@@ -598,7 +599,21 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
-static void at91_pm_switch_ba_to_vbat(void)
+/**
+ * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch
+ * to automatic/hardware mode.
+ *
+ * The Backup Unit Power Switch can be managed either by software or hardware.
+ * Enabling hardware mode allows the automatic transition of power between
+ * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the
+ * availability of these power sources.
+ *
+ * If the Backup Unit Power Switch is already in automatic mode, no action is
+ * required. If it is in software-controlled mode, it is switched to automatic
+ * mode to enhance safety and eliminate the need for toggling between power
+ * sources.
+ */
+static void at91_pm_switch_ba_to_auto(void)
 {
 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
 	unsigned int val;
@@ -609,24 +624,19 @@ static void at91_pm_switch_ba_to_vbat(void)
 
 	val = readl(soc_pm.data.sfrbu + offset);
 
-	/* Already on VBAT. */
-	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+	/* Already on auto/hardware. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl))
 		return;
 
-	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	val &= ~soc_pm.sfrbu_regs.pswbu.ctrl;
+	val |= soc_pm.sfrbu_regs.pswbu.key;
 	writel(val, soc_pm.data.sfrbu + offset);
-
-	/* Wait for update. */
-	val = readl(soc_pm.data.sfrbu + offset);
-	while (val & soc_pm.sfrbu_regs.pswbu.state)
-		val = readl(soc_pm.data.sfrbu + offset);
 }
 
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		at91_pm_switch_ba_to_vbat();
+		at91_pm_switch_ba_to_auto();
 
 		cpu_suspend(0, at91_suspend_finish);
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-davinci/Kconfig linux-libre-6.12.38-gnu/arch/arm/mach-davinci/Kconfig
index 2a8a9fe46586..3fa15f342240 100644
--- linux-libre-6.12-gnu/arch/arm/mach-davinci/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm/mach-davinci/Kconfig
@@ -27,6 +27,7 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
+	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap1/Kconfig linux-libre-6.12.38-gnu/arch/arm/mach-omap1/Kconfig
index a643b71e30a3..08ec6bd84ada 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap1/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm/mach-omap1/Kconfig
@@ -8,6 +8,7 @@ menuconfig ARCH_OMAP1
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select FORCE_PCI if PCCARD
+	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap1/board-nokia770.c linux-libre-6.12.38-gnu/arch/arm/mach-omap1/board-nokia770.c
index 3312ef93355d..a5bf5554800f 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap1/board-nokia770.c
+++ linux-libre-6.12.38-gnu/arch/arm/mach-omap1/board-nokia770.c
@@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = {
 		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for retu IRQ */
-		GPIO_LOOKUP("gpio-48-63", 15, "retu_irq",
+		GPIO_LOOKUP("gpio-48-63", 14, "retu_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for tahvo IRQ */
 		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomain.h linux-libre-6.12.38-gnu/arch/arm/mach-omap2/clockdomain.h
index c36fb2721261..86a2f9e5d0ef 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomain.h
+++ linux-libre-6.12.38-gnu/arch/arm/mach-omap2/clockdomain.h
@@ -48,6 +48,7 @@
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 #define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
+#define CLKDM_STANDBY_FORCE_WAKEUP		BIT(7)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c linux-libre-6.12.38-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
index 87f4e927eb18..c05a3c07d448 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ linux-libre-6.12.38-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -19,7 +19,7 @@ static struct clockdomain l4ls_am33xx_clkdm = {
 	.pwrdm		= { .name = "per_pwrdm" },
 	.cm_inst	= AM33XX_CM_PER_MOD,
 	.clkdm_offs	= AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
-	.flags		= CLKDM_CAN_SWSUP,
+	.flags		= CLKDM_CAN_SWSUP | CLKDM_STANDBY_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3s_am33xx_clkdm = {
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/cm33xx.c linux-libre-6.12.38-gnu/arch/arm/mach-omap2/cm33xx.c
index acdf72a541c0..a4dd42abda89 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/cm33xx.c
+++ linux-libre-6.12.38-gnu/arch/arm/mach-omap2/cm33xx.c
@@ -20,6 +20,9 @@
 #include "cm-regbits-34xx.h"
 #include "cm-regbits-33xx.h"
 #include "prm33xx.h"
+#if IS_ENABLED(CONFIG_SUSPEND)
+#include <linux/suspend.h>
+#endif
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -328,8 +331,17 @@ static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
 {
 	bool hwsup = false;
 
+#if IS_ENABLED(CONFIG_SUSPEND)
+	/*
+	 * In case of standby, Don't put the l4ls clk domain to sleep.
+	 * Since CM3 PM FW doesn't wake-up/enable the l4ls clk domain
+	 * upon wake-up, CM3 PM FW fails to wake-up th MPU.
+	 */
+	if (pm_suspend_target_state == PM_SUSPEND_STANDBY &&
+	    (clkdm->flags & CLKDM_STANDBY_FORCE_WAKEUP))
+		return 0;
+#endif
 	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
 	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
 		am33xx_clkdm_sleep(clkdm);
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/pmic-cpcap.c linux-libre-6.12.38-gnu/arch/arm/mach-omap2/pmic-cpcap.c
index 4f31e61c0c90..9f9a20274db8 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/pmic-cpcap.c
+++ linux-libre-6.12.38-gnu/arch/arm/mach-omap2/pmic-cpcap.c
@@ -264,7 +264,11 @@ int __init omap4_cpcap_init(void)
 
 static int __init cpcap_late_init(void)
 {
-	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return 0;
+
+	if (soc_is_omap443x() || soc_is_omap446x() || soc_is_omap447x())
+		omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
 
 	return 0;
 }
diff --git linux-libre-6.12-gnu/arch/arm/mach-shmobile/headsmp.S linux-libre-6.12.38-gnu/arch/arm/mach-shmobile/headsmp.S
index a956b489b6ea..2bc7e73a8582 100644
--- linux-libre-6.12-gnu/arch/arm/mach-shmobile/headsmp.S
+++ linux-libre-6.12.38-gnu/arch/arm/mach-shmobile/headsmp.S
@@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep)
 	.long	shmobile_smp_arg - 1b
 
 	.bss
+	.align	2
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
 	.space	NR_CPUS * 4
diff --git linux-libre-6.12-gnu/arch/arm/mm/ioremap.c linux-libre-6.12.38-gnu/arch/arm/mm/ioremap.c
index 794cfea9f9d4..cbf5a03d2b18 100644
--- linux-libre-6.12-gnu/arch/arm/mm/ioremap.c
+++ linux-libre-6.12.38-gnu/arch/arm/mm/ioremap.c
@@ -23,6 +23,7 @@
  */
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/kasan.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/io.h>
@@ -115,16 +116,40 @@ int ioremap_page(unsigned long virt, unsigned long phys,
 }
 EXPORT_SYMBOL(ioremap_page);
 
+#ifdef CONFIG_KASAN
+static unsigned long arm_kasan_mem_to_shadow(unsigned long addr)
+{
+	return (unsigned long)kasan_mem_to_shadow((void *)addr);
+}
+#else
+static unsigned long arm_kasan_mem_to_shadow(unsigned long addr)
+{
+	return 0;
+}
+#endif
+
+static void memcpy_pgd(struct mm_struct *mm, unsigned long start,
+		       unsigned long end)
+{
+	end = ALIGN(end, PGDIR_SIZE);
+	memcpy(pgd_offset(mm, start), pgd_offset_k(start),
+	       sizeof(pgd_t) * (pgd_index(end) - pgd_index(start)));
+}
+
 void __check_vmalloc_seq(struct mm_struct *mm)
 {
 	int seq;
 
 	do {
-		seq = atomic_read(&init_mm.context.vmalloc_seq);
-		memcpy(pgd_offset(mm, VMALLOC_START),
-		       pgd_offset_k(VMALLOC_START),
-		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
-					pgd_index(VMALLOC_START)));
+		seq = atomic_read_acquire(&init_mm.context.vmalloc_seq);
+		memcpy_pgd(mm, VMALLOC_START, VMALLOC_END);
+		if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+			unsigned long start =
+				arm_kasan_mem_to_shadow(VMALLOC_START);
+			unsigned long end =
+				arm_kasan_mem_to_shadow(VMALLOC_END);
+			memcpy_pgd(mm, start, end);
+		}
 		/*
 		 * Use a store-release so that other CPUs that observe the
 		 * counter's new value are guaranteed to see the results of the
@@ -490,7 +515,5 @@ void __init early_ioremap_init(void)
 bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 				 unsigned long flags)
 {
-	unsigned long pfn = PHYS_PFN(offset);
-
-	return memblock_is_map_memory(pfn);
+	return memblock_is_map_memory(offset);
 }
diff --git linux-libre-6.12-gnu/arch/arm64/Kconfig linux-libre-6.12.38-gnu/arch/arm64/Kconfig
index 22f8a7bca6d2..7887d18cce3e 100644
--- linux-libre-6.12-gnu/arch/arm64/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm64/Kconfig
@@ -322,9 +322,9 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -1232,6 +1232,17 @@ config HISILICON_ERRATUM_161600802
 
 	  If unsure, say Y.
 
+config HISILICON_ERRATUM_162100801
+	bool "Hip09 162100801 erratum support"
+	default y
+	help
+	  When enabling GICv4.1 in hip09, VMAPP will fail to clear some caches
+	  during unmapping operation, which will cause some vSGIs lost.
+	  To fix the issue, invalidate related vPE cache through GICR_INVALLR
+	  after VMOVP.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
diff --git linux-libre-6.12-gnu/arch/arm64/Makefile linux-libre-6.12.38-gnu/arch/arm64/Makefile
index 9efd3f37c2fd..88029d38b3c6 100644
--- linux-libre-6.12-gnu/arch/arm64/Makefile
+++ linux-libre-6.12.38-gnu/arch/arm64/Makefile
@@ -48,7 +48,11 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_NO_FPU) \
 KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
 KBUILD_AFLAGS	+= $(compat_vdso)
 
+ifeq ($(call rustc-min-version, 108500),y)
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none-softfloat
+else
 KBUILD_RUSTFLAGS += --target=aarch64-unknown-none -Ctarget-feature="-neon"
+endif
 
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 379c2c8466f5..86d44349e095 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 6eab61a12cd8..b844759f52c0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -212,6 +212,9 @@
 		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index b407e1dd08a7..ec055510af8b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index a5c3920e0f04..0fecf0abb204 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -445,6 +445,8 @@
 			clock-names = "ahb", "tcon-ch0";
 			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 3be1e8c2fdb9..1012103df25f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -151,28 +151,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -290,6 +274,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 6c3bfe3d09d9..14cc99b21622 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -175,16 +175,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -295,6 +291,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 13b07141c334..bab0f63dcc5b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -112,20 +112,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -240,6 +232,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
index de35fa2d7a6d..8e3e3354ed67 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -116,6 +116,10 @@
 	status = "okay";
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &frddr_a {
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 5988a4eb6efa..cb78ce7af0b3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -71,7 +71,7 @@
  */
 &port00 {
 	bus-range = <1 1>;
-	wifi0: network@0,0 {
+	wifi0: wifi@0,0 {
 		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6e5a984c1d4e..447bfa060918 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -67,7 +67,7 @@
 			l2_cache_l0: l2-cache-l0 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -91,7 +91,7 @@
 			l2_cache_l1: l2-cache-l1 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -115,7 +115,7 @@
 			l2_cache_l2: l2-cache-l2 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -139,7 +139,7 @@
 			l2_cache_l3: l2-cache-l3 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -232,7 +232,7 @@
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_uart>, <&clk_vpu>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 302c5beb224a..b8f8255f840b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -1451,6 +1451,7 @@
 			/* TODO: update once support for this CMU exists */
 			clocks = <0>;
 			clock-names = "pclk";
+			status = "disabled";
 		};
 
 		cmu_top: clock-controller@1e080000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 97ff1ddd6318..734a75198f06 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 62ed64663f49..9ba0cb89fa24 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -233,6 +233,7 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index ce20de259805..3d0b14968131 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -16,10 +16,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 5fa395914191..d9b13c87f93b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -162,7 +162,20 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_nvcc_sd>;
 	};
 
 	reserved-memory {
@@ -290,7 +303,7 @@
 			  "SODIMM_19",
 			  "",
 			  "",
-			  "",
+			  "PMIC_USDHC_VSELECT",
 			  "",
 			  "",
 			  "",
@@ -801,6 +814,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &wdog1 {
@@ -1222,13 +1236,17 @@
 			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
 	};
 
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x10>; /* PMIC_USDHC_VSELECT */
+	};
+
 	/*
 	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
 	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
 	 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
@@ -1239,7 +1257,6 @@
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
@@ -1250,7 +1267,6 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
@@ -1262,7 +1278,6 @@
 	/* Avoid backfeeding with removed card power */
 	pinctrl_usdhc2_sleep: usdhc2slpgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1df5ceb11387..37fc5ed98d7f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 2a64115eebf1..bb11590473a4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -242,6 +242,7 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
index 96db07fc9bec..1f2a0fe70a0a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
@@ -29,12 +29,37 @@
 	};
 };
 
+/*
+ * rst_usb_hub_hog and sel_usb_hub_hog have property 'output-high',
+ * dt overlay don't support /delete-property/. Both 'output-low' and
+ * 'output-high' will be exist under hog nodes if overlay file set
+ * 'output-low'. Workaround is disable these hog and create new hog with
+ * 'output-low'.
+ */
+
 &rst_usb_hub_hog {
-	output-low;
+	status = "disabled";
+};
+
+&expander0 {
+	rst-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		output-low;
+		line-name = "RST_USB_HUB#";
+	};
 };
 
 &sel_usb_hub_hog {
-	output-low;
+	status = "disabled";
+};
+
+&gpio2 {
+	sel-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
 };
 
 &usbotg1 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index 15f7ab58db36..88561df70d03 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -257,6 +257,7 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 336785a9fba8..3ddc5aaa7c5f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
  */
 
 #include "imx8mp.dtsi"
@@ -23,15 +24,6 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
-
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
 };
 
 &A53_0 {
@@ -197,7 +189,7 @@
 	no-sd;
 	no-sdio;
 	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index b2ac2583a592..b59da91fdd04 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -35,7 +35,6 @@
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
-
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 	        compatible = "regulator-fixed";
 	        regulator-name = "VSD_3V3";
@@ -46,6 +45,16 @@
 	        startup-delay-us = <100>;
 	        off-on-delay-us = <12000>;
 	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "VSD_VSEL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0 1800000 0x1>;
+		vin-supply = <&ldo5>;
+	};
 };
 
 &A53_0 {
@@ -205,6 +214,7 @@
         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
         cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
         vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
         bus-width = <4>;
         status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index da8902c5f7e5..1493319aa748 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -28,10 +28,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index a19ad5ee7f79..1689fe440993 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -175,7 +175,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
 	};
 
 	reserved-memory {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index 04b9b3d31f4f..7bc3852c6ef8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -917,7 +917,7 @@
 				reg-names = "ram", "regs", "rxfifo", "txfifo";
 				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
 					 <&clk IMX93_CLK_SPDIF_GATE>,
 					 <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
index 03661e76550f..f904d6b1c84b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1478,7 +1478,7 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x60100000 0 0xfe00000>,
 			      <0 0x4c360000 0 0x10000>,
-			      <0 0x4c340000 0 0x2000>;
+			      <0 0x4c340000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
 				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
@@ -1518,7 +1518,7 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x4c360000 0 0x1000>,
 			      <0 0x4c320000 0 0x1000>,
-			      <0 0x4c340000 0 0x2000>,
+			      <0 0x4c340000 0 0x4000>,
 			      <0 0x4c370000 0 0x10000>,
 			      <0x9 0 1 0>;
 			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
@@ -1545,7 +1545,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <8 0x80100000 0 0xfe00000>,
 			      <0 0x4c3e0000 0 0x10000>,
-			      <0 0x4c3c0000 0 0x2000>;
+			      <0 0x4c3c0000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
 				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
@@ -1585,7 +1585,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <0 0x4c3e0000 0 0x1000>,
 			      <0 0x4c3a0000 0 0x1000>,
-			      <0 0x4c3c0000 0 0x2000>,
+			      <0 0x4c3c0000 0 0x4000>,
 			      <0 0x4c3f0000 0 0x10000>,
 			      <0xa 0 1 0>;
 			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
@@ -1609,7 +1609,7 @@
 
 		netcmix_blk_ctrl: syscon@4c810000 {
 			compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
-			reg = <0x0 0x4c810000 0x0 0x10000>;
+			reg = <0x0 0x4c810000 0x0 0x8>;
 			#clock-cells = <1>;
 			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
 			assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
index 3a9b6907185d..242820845707 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -26,6 +26,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_quad_pins>;
 
 		led-power1 {
 			label = "udpu:green:power";
@@ -82,8 +84,6 @@
 
 &spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -108,6 +108,10 @@
 	};
 };
 
+&spi_quad_pins {
+	function = "gpio";
+};
+
 &pinctrl_nb {
 	i2c2_recovery_pins: i2c2-recovery-pins {
 		groups = "i2c2";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index b1ea7dcaed17..47234d0858dd 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -435,7 +435,7 @@
 	managed = "in-band-status";
 	phy-mode = "sgmii";
 	phy = <&cp1_phy0>;
-	phys = <&cp0_comphy3 1>;
+	phys = <&cp1_comphy3 1>;
 	status = "okay";
 };
 
@@ -444,7 +444,7 @@
 	managed = "in-band-status";
 	phy-mode = "sgmii";
 	phy = <&cp1_phy1>;
-	phys = <&cp0_comphy5 2>;
+	phys = <&cp1_comphy5 2>;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
index 5fafa842d312..dca4e5c3d8e2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -60,7 +60,6 @@
 			};
 
 			mt6357_vfe28_reg: ldo-vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -75,7 +74,6 @@
 			};
 
 			mt6357_vrf18_reg: ldo-vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -83,7 +81,6 @@
 			};
 
 			mt6357_vrf12_reg: ldo-vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -112,7 +109,6 @@
 			};
 
 			mt6357_vcn28_reg: ldo-vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -120,7 +116,6 @@
 			};
 
 			mt6357_vcn18_reg: ldo-vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -142,7 +137,6 @@
 			};
 
 			mt6357_vcamio_reg: ldo-vcamio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -175,7 +169,6 @@
 			};
 
 			mt6357_vaux18_reg: ldo-vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -183,7 +176,6 @@
 			};
 
 			mt6357_vaud28_reg: ldo-vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -191,7 +183,6 @@
 			};
 
 			mt6357_vio28_reg: ldo-vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -199,7 +190,6 @@
 			};
 
 			mt6357_vio18_reg: ldo-vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 641d452fbc08..e23672a2eea4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -15,12 +15,12 @@
 			#io-channel-cells = <1>;
 		};
 
-		mt6358codec: mt6358codec {
+		mt6358codec: audio-codec {
 			compatible = "mediatek,mt6358-sound";
 			mediatek,dmic-mode = <0>; /* two-wires */
 		};
 
-		mt6358regulator: mt6358regulator {
+		mt6358regulator: regulators {
 			compatible = "mediatek,mt6358-regulator";
 
 			mt6358_vdram1_reg: buck_vdram1 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
index 8e1b8c85c6ed..779d6dfb55c0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -18,6 +18,8 @@
 		};
 
 		regulators {
+			compatible = "mediatek,mt6359-regulator";
+
 			mt6359_vs1_buck_reg: buck_vs1 {
 				regulator-name = "vs1";
 				regulator-min-microvolt = <800000>;
@@ -296,7 +298,7 @@
 			};
 		};
 
-		mt6359rtc: mt6359rtc {
+		mt6359rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index aa728331e876..284e240b7997 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -129,6 +129,7 @@
 			reg = <0 0x11003000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -142,6 +143,7 @@
 			reg = <0 0x11004000 0 0x1000>,
 			      <0 0x10217100 0 0x80>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -155,6 +157,7 @@
 			reg = <0 0x11005000 0 0x1000>,
 			      <0 0x10217180 0 0x80>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index 8d1cbc92bce3..ae0379fd42a9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -49,6 +49,14 @@
 		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
+		/*
+		 * The trackpad needs a post-power-on delay of 100ms,
+		 * but at time of writing, the power supply for it on
+		 * this board is always on. The delay is therefore not
+		 * added to avoid impacting the readiness of the
+		 * trackpad.
+		 */
+		vdd-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index b4d85147b77b..309e2d104fdc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -931,7 +931,7 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		clock: mt6397clock {
+		clock: clocks {
 			compatible = "mediatek,mt6397-clk";
 			#clock-cells = <1>;
 		};
@@ -942,11 +942,10 @@
 			#gpio-cells = <2>;
 		};
 
-		regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -956,7 +955,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -966,7 +964,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -975,7 +972,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -984,7 +980,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -993,7 +988,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -1002,7 +996,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -1011,7 +1004,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -1020,18 +1012,15 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1039,18 +1028,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -1058,7 +1044,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1066,7 +1051,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1074,7 +1058,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1082,7 +1065,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1090,7 +1072,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1098,7 +1079,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -1106,7 +1086,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -1114,7 +1093,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1123,7 +1101,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1131,7 +1108,7 @@
 			};
 		};
 
-		rtc: mt6397rtc {
+		rtc: rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index bb4671c18e3b..9fffed0ef4bf 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -307,11 +307,10 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6397regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -320,7 +319,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -329,7 +327,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -338,7 +335,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -347,7 +343,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -356,7 +351,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -365,7 +359,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -374,7 +367,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -383,19 +375,16 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@@ -403,18 +392,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -422,7 +408,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -430,7 +415,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -438,7 +422,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@@ -446,7 +429,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@@ -454,7 +436,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -462,7 +443,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -470,7 +450,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -478,7 +457,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -486,7 +464,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 3458be7f7f61..f49ec7495906 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1255,8 +1255,7 @@
 		};
 
 		pwm0: pwm@1401e000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401e000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
@@ -1266,8 +1265,7 @@
 		};
 
 		pwm1: pwm@1401f000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401f000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
index 19c1e2bee494..20b71f2e7159 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -30,3 +30,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <4100>;
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
index f34964afe39b..83bbcfe62083 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -18,6 +18,8 @@
 };
 
 &i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
 	trackpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 0b45aee2e299..3935d83a047e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -26,7 +26,14 @@
 	hid-descr-addr = <0x0001>;
 };
 
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_DAMU";
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <20000>;
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
index bbe6c338f465..f9c1ec366b26 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -25,3 +25,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <21500>;
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
index e8241587949b..561770fcf69e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -12,3 +12,18 @@
 	chassis-type = "laptop";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
index 76d33540166f..c942e461a177 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
 
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad@2c {
 		compatible = "hid-over-i2c";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 783c333107bc..80888bd4ad82 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -8,35 +8,37 @@
 #include <arm/cros-ec-keyboard.dtsi>
 
 / {
-	pp1200_mipibrdg: pp1200-mipibrdg {
+	pp1000_mipibrdg: pp1000-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "pp1200_mipibrdg";
+		regulator-name = "pp1000_mipibrdg";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1200_mipibrdg_en>;
+		pinctrl-0 = <&pp1000_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp1800_mipibrdg: pp1800-mipibrdg {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_lcd_en>;
+		pinctrl-0 = <&pp1800_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp3300_panel: pp3300-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pp3300_panel_pins>;
 
@@ -44,18 +46,20 @@
 		regulator-boot-on;
 
 		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
-	vddio_mipibrdg: vddio-mipibrdg {
+	pp3300_mipibrdg: pp3300-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "vddio_mipibrdg";
+		regulator-name = "pp3300_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vddio_mipibrdg_en>;
+		pinctrl-0 = <&pp3300_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
 	volume_buttons: volume-buttons {
@@ -146,9 +150,9 @@
 		pinctrl-0 = <&anx7625_pins>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
-		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd10-supply = <&pp1000_mipibrdg>;
 		vdd18-supply = <&pp1800_mipibrdg>;
-		vdd33-supply = <&vddio_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
 
 		ports {
 			#address-cells = <1>;
@@ -391,14 +395,14 @@
 		"",
 		"";
 
-	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -460,7 +464,7 @@
 		};
 	};
 
-	vddio_mipibrdg_en: vddio-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a2fb060502d9..8793eeeeb4c6 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -92,9 +92,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 5c1bf6a1e475..da6e767b4cee 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -79,9 +79,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index 2af7b5010feb..1f5b369eaf26 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -88,9 +88,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 5b10bf2d7399..f07d16baf069 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -280,14 +280,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&panel_in>;
 };
 
 &gic {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 1aa668c3ccf9..dbdee604edab 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -63,6 +63,18 @@
 		pulldown-ohm = <0>;
 		io-channels = <&auxadc 0>;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
 };
 
 &auxadc {
@@ -120,6 +132,43 @@
 	pinctrl-0 = <&i2c6_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it66121hdmitx: hdmitx@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ite_pins>;
+		reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&pio>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		vcn33-supply = <&mt6358_vcn33_reg>;
+		vcn18-supply = <&mt6358_vcn18_reg>;
+		vrf12-supply = <&mt6358_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <12>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_connector_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &keyboard {
@@ -362,6 +411,67 @@
 			input-enable;
 		};
 	};
+
+	ite_pins: ite-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO160__FUNC_GPIO160>;
+			output-high;
+		};
+	};
+
+	dpi_func_pins: dpi-func-pins {
+		pins-dpi {
+			pinmux = <PINMUX_GPIO12__FUNC_I2S5_BCK>,
+				 <PINMUX_GPIO46__FUNC_I2S5_LRCK>,
+				 <PINMUX_GPIO47__FUNC_I2S5_DO>,
+				 <PINMUX_GPIO13__FUNC_DBPI_D0>,
+				 <PINMUX_GPIO14__FUNC_DBPI_D1>,
+				 <PINMUX_GPIO15__FUNC_DBPI_D2>,
+				 <PINMUX_GPIO16__FUNC_DBPI_D3>,
+				 <PINMUX_GPIO17__FUNC_DBPI_D4>,
+				 <PINMUX_GPIO18__FUNC_DBPI_D5>,
+				 <PINMUX_GPIO19__FUNC_DBPI_D6>,
+				 <PINMUX_GPIO20__FUNC_DBPI_D7>,
+				 <PINMUX_GPIO21__FUNC_DBPI_D8>,
+				 <PINMUX_GPIO22__FUNC_DBPI_D9>,
+				 <PINMUX_GPIO23__FUNC_DBPI_D10>,
+				 <PINMUX_GPIO24__FUNC_DBPI_D11>,
+				 <PINMUX_GPIO25__FUNC_DBPI_HSYNC>,
+				 <PINMUX_GPIO26__FUNC_DBPI_VSYNC>,
+				 <PINMUX_GPIO27__FUNC_DBPI_DE>,
+				 <PINMUX_GPIO28__FUNC_DBPI_CK>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins-idle {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO46__FUNC_GPIO46>,
+				 <PINMUX_GPIO47__FUNC_GPIO47>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>,
+				 <PINMUX_GPIO14__FUNC_GPIO14>,
+				 <PINMUX_GPIO15__FUNC_GPIO15>,
+				 <PINMUX_GPIO16__FUNC_GPIO16>,
+				 <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO18__FUNC_GPIO18>,
+				 <PINMUX_GPIO19__FUNC_GPIO19>,
+				 <PINMUX_GPIO20__FUNC_GPIO20>,
+				 <PINMUX_GPIO21__FUNC_GPIO21>,
+				 <PINMUX_GPIO22__FUNC_GPIO22>,
+				 <PINMUX_GPIO23__FUNC_GPIO23>,
+				 <PINMUX_GPIO24__FUNC_GPIO24>,
+				 <PINMUX_GPIO25__FUNC_GPIO25>,
+				 <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>,
+				 <PINMUX_GPIO28__FUNC_GPIO28>;
+		};
+	};
 };
 
 &pmic {
@@ -412,6 +522,15 @@
 	status = "okay";
 };
 
-&dsi0 {
-	status = "disabled";
+&dpi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_func_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&it66121_in>;
+		};
+	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 266441e999f2..65be2c2c26d4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1024,7 +1024,8 @@
 		};
 
 		keyboard: keyboard@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8183-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk26m>;
@@ -1834,6 +1835,11 @@
 			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
 		};
 
 		dpi0: dpi@14015000 {
@@ -1845,6 +1851,11 @@
 				 <&mmsys CLK_MM_DPI_MM>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL>;
 			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			port {
+				dpi_out: endpoint { };
+			};
 		};
 
 		mutex: mutex@14016000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
index 52ec58128d56..b495a241b443 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
@@ -10,12 +10,6 @@
 
 / {
 	chassis-type = "laptop";
-
-	max98360a: max98360a {
-		compatible = "maxim,max98360a";
-		sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
-		#sound-dai-cells = <0>;
-	};
 };
 
 &cpu6 {
@@ -59,19 +53,14 @@
 	opp-hz = /bits/ 64 <2200000000>;
 };
 
-&rt1019p{
-	status = "disabled";
-};
-
 &sound {
 	compatible = "mediatek,mt8186-mt6366-rt5682s-max98360-sound";
-	status = "okay";
+};
 
-	spk-hdmi-playback-dai-link {
-		codec {
-			sound-dai = <&it6505dptx>, <&max98360a>;
-		};
-	};
+&speaker_codec {
+	compatible = "maxim,max98360a";
+	sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	/delete-property/ sdb-gpios;
 };
 
 &spmi {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index 925c9038572f..766550514612 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -259,15 +259,15 @@
 			mediatek,clk-provider = "cpu";
 			/* RT1019P and IT6505 connected to the same I2S line */
 			codec {
-				sound-dai = <&it6505dptx>, <&rt1019p>;
+				sound-dai = <&it6505dptx>, <&speaker_codec>;
 			};
 		};
 	};
 
-	rt1019p: speaker-codec {
+	speaker_codec: speaker-codec {
 		compatible = "realtek,rt1019p";
 		pinctrl-names = "default";
-		pinctrl-0 = <&rt1019p_pins_default>;
+		pinctrl-0 = <&speaker_codec_pins_default>;
 		#sound-dai-cells = <0>;
 		sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
 	};
@@ -423,7 +423,7 @@
 		#sound-dai-cells = <0>;
 		ovdd-supply = <&mt6366_vsim2_reg>;
 		pwr18-supply = <&pp1800_dpbrdg_dx>;
-		reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 177 GPIO_ACTIVE_LOW>;
 
 		ports {
 			#address-cells = <1>;
@@ -1179,7 +1179,7 @@
 		};
 	};
 
-	rt1019p_pins_default: rt1019p-default-pins {
+	speaker_codec_pins_default: speaker-codec-default-pins {
 		pins-sdb {
 			pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
 			output-low;
@@ -1336,7 +1336,7 @@
 				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
 							   MT6397_BUCK_MODE_FORCE_PWM>;
 				regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
-				regulator-coupled-max-spread = <10000>;
+				regulator-coupled-max-spread = <100000>;
 			};
 
 			mt6366_vproc11_reg: vproc11 {
@@ -1545,7 +1545,7 @@
 				regulator-ramp-delay = <6250>;
 				regulator-enable-ramp-delay = <240>;
 				regulator-coupled-with = <&mt6366_vgpu_reg>;
-				regulator-coupled-max-spread = <10000>;
+				regulator-coupled-max-spread = <100000>;
 			};
 
 			mt6366_vsram_others_reg: vsram-others {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 148c332018b0..ac34ba3afacb 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1570,6 +1570,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 2>;
 			status = "disabled";
 
 			usb_host0: usb@11200000 {
@@ -1583,8 +1585,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
@@ -1636,6 +1636,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x424 2>;
 			status = "disabled";
 
 			usb_host1: usb@11280000 {
@@ -1649,8 +1651,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
 				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index cd27966d2e3c..91beef22e0a9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -956,9 +956,9 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8188_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8188_POWER_DOMAIN_MFG1 {
 						reg = <MT8188_POWER_DOMAIN_MFG1>;
-						clocks = <&topckgen CLK_APMIXED_MFGPLL>,
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
 						clock-names = "mfg", "alt";
 						mediatek,infracfg = <&infracfg_ao>;
@@ -1689,7 +1689,6 @@
 					 <&clk26m>;
 				clock-names = "ref", "da_ref";
 				#phy-cells = <1>;
-				status = "disabled";
 			};
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 36e0b4cf9c43..99d5a1a6183f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -1420,7 +1420,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1430,7 +1429,6 @@
 			};
 
 			mt6315_6_vbuck3: vbuck3 {
-				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1447,7 +1445,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 179ef9ba58c5..728bd8a6943f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -438,7 +438,7 @@
 		/* Realtek RT5682i or RT5682s, sharing the same configuration */
 		reg = <0x1a>;
 		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
-		#sound-dai-cells = <0>;
+		#sound-dai-cells = <1>;
 		realtek,jd-src = <1>;
 
 		AVDD-supply = <&mt6359_vio18_ldo_reg>;
@@ -1181,7 +1181,7 @@
 		link-name = "ETDM1_OUT_BE";
 		mediatek,clk-provider = "cpu";
 		codec {
-			sound-dai = <&audio_codec>;
+			sound-dai = <&audio_codec 0>;
 		};
 	};
 
@@ -1189,7 +1189,7 @@
 		link-name = "ETDM2_IN_BE";
 		mediatek,clk-provider = "cpu";
 		codec {
-			sound-dai = <&audio_codec>;
+			sound-dai = <&audio_codec 0>;
 		};
 	};
 
@@ -1285,7 +1285,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1303,7 +1302,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 31d424b8fc7c..bfb75296795c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -137,7 +137,6 @@
 			richtek,vinovp-microvolt = <14500000>;
 
 			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
@@ -149,7 +148,6 @@
 			LDO_VIN3-supply = <&mt6360_buck2>;
 
 			mt6360_buck1: buck1 {
-				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -160,7 +158,6 @@
 			};
 
 			mt6360_buck2: buck2 {
-				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -171,7 +168,6 @@
 			};
 
 			mt6360_ldo1: ldo1 {
-				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -180,7 +176,6 @@
 			};
 
 			mt6360_ldo2: ldo2 {
-				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -189,7 +184,6 @@
 			};
 
 			mt6360_ldo3: ldo3 {
-				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -198,7 +192,6 @@
 			};
 
 			mt6360_ldo5: ldo5 {
-				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
@@ -207,7 +200,6 @@
 			};
 
 			mt6360_ldo6: ldo6 {
-				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -216,7 +208,6 @@
 			};
 
 			mt6360_ldo7: ldo7 {
-				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index e89ba384c4aa..2e138b54f556 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -487,7 +487,7 @@
 		};
 
 		infracfg_ao: syscon@10001000 {
-			compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+			compatible = "mediatek,mt8195-infracfg_ao", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -617,22 +617,6 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
-						reg = <MT8195_POWER_DOMAIN_VDEC1>;
-						clocks = <&vdecsys CLK_VDEC_LARB1>;
-						clock-names = "vdec1-0";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
-					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
-						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
-						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
-						clock-names = "venc1-larb";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
 					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
 						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
 						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
@@ -678,15 +662,25 @@
 							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
 							clock-names = "vdec0-0";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
-						};
 
-						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
-							reg = <MT8195_POWER_DOMAIN_VDEC2>;
-							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
-							clock-names = "vdec2-0";
-							mediatek,infracfg = <&infracfg_ao>;
-							#power-domain-cells = <0>;
+							power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+								reg = <MT8195_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC_LARB1>;
+								clock-names = "vdec1-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+								reg = <MT8195_POWER_DOMAIN_VDEC2>;
+								clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+								clock-names = "vdec2-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
@@ -694,7 +688,17 @@
 							clocks = <&vencsys CLK_VENC_LARB>;
 							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+								reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+								clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+								clock-names = "venc1-larb";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
@@ -1611,9 +1615,6 @@
 			phy-names = "pcie-phy";
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
@@ -3138,7 +3139,7 @@
 		};
 
 		ovl0: ovl@1c000000 {
-			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			compatible = "mediatek,mt8195-disp-ovl";
 			reg = <0 0x1c000000 0 0x1000>;
 			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
@@ -3331,11 +3332,9 @@
 		mutex1: mutex@1c101000 {
 			compatible = "mediatek,mt8195-disp-mutex";
 			reg = <0 0x1c101000 0 0x1000>;
-			reg-names = "vdo1_mutex";
 			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
-			clock-names = "vdo1_mutex";
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 9c91fe8ea0f9..2bf8c9d02b6e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -449,7 +449,8 @@
 		};
 
 		keypad: keypad@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8365-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			wakeup-source;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 1ef6262b65c9..6f34b06a0359 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -187,7 +187,7 @@
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		eth_phy0: eth-phy0@1 {
+		eth_phy0: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <0x1>;
 		};
@@ -820,7 +820,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -837,7 +836,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 14ec970c4e49..41dc34837b02 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -812,7 +812,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -829,7 +828,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index d0b03dc4d3f4..e30623ebac0e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -144,10 +144,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};
 
@@ -206,7 +206,7 @@
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};
 
@@ -268,7 +268,7 @@
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
@@ -344,6 +344,7 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -358,6 +359,7 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -372,6 +374,7 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index ec8dfb3d1c6d..a356db5fcc5f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -47,7 +47,6 @@
 };
 
 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@@ -156,7 +155,6 @@
 };
 
 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 2b3bb5d0af17..f0b7949df92c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -621,9 +621,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTB>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -633,9 +631,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTD>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -645,9 +641,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTE>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTE>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -657,9 +651,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTF>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTF>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -1236,9 +1228,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTC>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -1248,9 +1238,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTG>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTG>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 33f92b77cd9d..c36950774785 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -766,9 +766,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTD>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTD>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -778,9 +776,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTE>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTE>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -790,9 +786,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTF>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTF>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -817,9 +811,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTH>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTH>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -1616,9 +1608,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTC>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTC>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -1628,9 +1618,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTG>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTG>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index c00db75e3910..9c1b2e7d3997 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -11,6 +11,7 @@
 		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
+		serial3 = &uartd;
 	};
 
 	chosen {
@@ -351,7 +352,7 @@
 		#size-cells = <0>;
 
 		wifi@1 {
-			compatible = "brcm,bcm4354-fmac";
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
 			reg = <1>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 63b94a04308e..38d49d612c0c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1686,7 +1686,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&vdd_1v8>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
index 36e888053746..9ce55b4d2de8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
@@ -302,6 +302,16 @@
 		};
 
 		pcie@141a0000 {
+			reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+			       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
+			       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+			       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+			       0x2e 0x20000000 0x0 0x10000000>; /* ECAM (256MB)               */
+
+			ranges = <0x81000000 0x00 0x3a100000 0x00 0x3a100000 0x0 0x00100000      /* downstream I/O (1MB) */
+				  0x82000000 0x00 0x40000000 0x2e 0x30000000 0x0 0x08000000      /* non-prefetchable memory (128MB) */
+				  0xc3000000 0x28 0x00000000 0x28 0x00000000 0x6 0x20000000>;    /* prefetchable memory (25088MB) */
+
 			status = "okay";
 			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
 			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
index 19340d13f789..41821354bbda 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
@@ -227,13 +227,6 @@
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
 		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
-		};
 	};
 
 	fan: pwm-fan {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 984c85eab41a..2601b43b2d8c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -3815,7 +3815,7 @@
 			compatible = "nvidia,tegra234-sce-fabric";
 			reg = <0x0 0xb600000 0x0 0x40000>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		rce-fabric@be00000 {
@@ -3900,7 +3900,7 @@
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			resets = <&bpmp TEGRA234_RESET_SPI2>;
 			reset-names = "spi";
-			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dmas = <&gpcdma 16>, <&gpcdma 16>;
 			dma-names = "rx", "tx";
 			dma-coherent;
 			status = "disabled";
@@ -3995,7 +3995,7 @@
 		};
 
 		dce-fabric@de00000 {
-			compatible = "nvidia,tegra234-sce-fabric";
+			compatible = "nvidia,tegra234-dce-fabric";
 			reg = <0x0 0xde00000 0x0 0x40000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
@@ -4018,6 +4018,8 @@
 			#redistributor-regions = <1>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+
+			#address-cells = <0>;
 		};
 
 		smmu_iso: iommu@10000000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/Makefile linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..b13c169ec70d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/Makefile
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/Makefile
@@ -207,6 +207,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+
+sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
+
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 91e104b0f865..a5294a42c287 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -111,6 +111,13 @@
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		mp5496_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 	};
 };
 
@@ -146,7 +153,7 @@
 };
 
 &usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-supply = <&regulator_fixed_0p925>;
 
 	status = "okay";
@@ -154,7 +161,7 @@
 
 &usb_0_qusbphy {
 	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 08a82a5cf667..81ccd0600c5a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -261,6 +261,8 @@
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0ee44706b70b..800bfe83dbf8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -125,7 +125,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 7af210789879..effa3aaeb250 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
index fc2a7f13f690..8a7de1dba2b9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@@ -437,6 +437,15 @@
 			#size-cells = <1>;
 			ranges;
 
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
+
 			clocks = <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 2b7e295d4ede..9bc1115c54c8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -64,7 +64,7 @@
 		};
 
 		led@1 {
-			reg = <0>;
+			reg = <1>;
 			chan-name = "button-backlight1";
 			led-cur = /bits/ 8 <0x32>;
 			max-cur = /bits/ 8 <0xc8>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e5966724f37c..0a8884145865 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3065,9 +3065,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 79bc42ffb6a1..2cfdf5bd5fd9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1073,7 +1073,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1092,7 +1092,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1137,7 +1137,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1184,7 +1184,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1231,7 +1231,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1278,7 +1278,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1297,7 +1297,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1342,7 +1342,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index 11a6fbe0d186..42d38108e09c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -942,8 +942,6 @@
 
 	qcom,squelch-detector-bp = <(-2090)>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
index cddc16bac0ce..81a161c0cc5a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index f6960e2d466a..e6ac529e6b72 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -367,7 +367,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &ufs_mem_hc {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
index e65305f8136c..c73eda75faf8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -31,7 +31,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 58b325af5ff6..b59c54515328 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -545,7 +545,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts
index 1c781d9e24cf..52ce51e56e2f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -31,7 +31,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index f7d1ac3322dc..30f2cd81ce76 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -517,7 +517,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32764>;
+	clock-frequency = <32000>;
 };
 
 &spi16 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index e8dbc8d820a6..b28fa598cebb 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1940,6 +1940,7 @@
 
 			qcom,cmb-element-bits = <32>;
 			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
 
 			out-ports {
 				port {
@@ -4011,15 +4012,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2141 0x04a0>,
-							 <&apps_smmu 0x2161 0x04a0>,
-							 <&apps_smmu 0x2181 0x0400>,
-							 <&apps_smmu 0x21c1 0x04a0>,
-							 <&apps_smmu 0x21e1 0x04a0>,
-							 <&apps_smmu 0x2541 0x04a0>,
-							 <&apps_smmu 0x2561 0x04a0>,
-							 <&apps_smmu 0x2581 0x0400>,
-							 <&apps_smmu 0x25c1 0x04a0>,
-							 <&apps_smmu 0x25e1 0x04a0>;
+							 <&apps_smmu 0x2181 0x0400>;
 						dma-coherent;
 					};
 
@@ -4027,15 +4020,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2142 0x04a0>,
-							 <&apps_smmu 0x2162 0x04a0>,
-							 <&apps_smmu 0x2182 0x0400>,
-							 <&apps_smmu 0x21c2 0x04a0>,
-							 <&apps_smmu 0x21e2 0x04a0>,
-							 <&apps_smmu 0x2542 0x04a0>,
-							 <&apps_smmu 0x2562 0x04a0>,
-							 <&apps_smmu 0x2582 0x0400>,
-							 <&apps_smmu 0x25c2 0x04a0>,
-							 <&apps_smmu 0x25e2 0x04a0>;
+							 <&apps_smmu 0x2182 0x0400>;
 						dma-coherent;
 					};
 
@@ -4043,15 +4028,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2143 0x04a0>,
-							 <&apps_smmu 0x2163 0x04a0>,
-							 <&apps_smmu 0x2183 0x0400>,
-							 <&apps_smmu 0x21c3 0x04a0>,
-							 <&apps_smmu 0x21e3 0x04a0>,
-							 <&apps_smmu 0x2543 0x04a0>,
-							 <&apps_smmu 0x2563 0x04a0>,
-							 <&apps_smmu 0x2583 0x0400>,
-							 <&apps_smmu 0x25c3 0x04a0>,
-							 <&apps_smmu 0x25e3 0x04a0>;
+							 <&apps_smmu 0x2183 0x0400>;
 						dma-coherent;
 					};
 
@@ -4059,15 +4036,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2144 0x04a0>,
-							 <&apps_smmu 0x2164 0x04a0>,
-							 <&apps_smmu 0x2184 0x0400>,
-							 <&apps_smmu 0x21c4 0x04a0>,
-							 <&apps_smmu 0x21e4 0x04a0>,
-							 <&apps_smmu 0x2544 0x04a0>,
-							 <&apps_smmu 0x2564 0x04a0>,
-							 <&apps_smmu 0x2584 0x0400>,
-							 <&apps_smmu 0x25c4 0x04a0>,
-							 <&apps_smmu 0x25e4 0x04a0>;
+							 <&apps_smmu 0x2184 0x0400>;
 						dma-coherent;
 					};
 
@@ -4075,15 +4044,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2145 0x04a0>,
-							 <&apps_smmu 0x2165 0x04a0>,
-							 <&apps_smmu 0x2185 0x0400>,
-							 <&apps_smmu 0x21c5 0x04a0>,
-							 <&apps_smmu 0x21e5 0x04a0>,
-							 <&apps_smmu 0x2545 0x04a0>,
-							 <&apps_smmu 0x2565 0x04a0>,
-							 <&apps_smmu 0x2585 0x0400>,
-							 <&apps_smmu 0x25c5 0x04a0>,
-							 <&apps_smmu 0x25e5 0x04a0>;
+							 <&apps_smmu 0x2185 0x0400>;
 						dma-coherent;
 					};
 
@@ -4091,15 +4052,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2146 0x04a0>,
-							 <&apps_smmu 0x2166 0x04a0>,
-							 <&apps_smmu 0x2186 0x0400>,
-							 <&apps_smmu 0x21c6 0x04a0>,
-							 <&apps_smmu 0x21e6 0x04a0>,
-							 <&apps_smmu 0x2546 0x04a0>,
-							 <&apps_smmu 0x2566 0x04a0>,
-							 <&apps_smmu 0x2586 0x0400>,
-							 <&apps_smmu 0x25c6 0x04a0>,
-							 <&apps_smmu 0x25e6 0x04a0>;
+							 <&apps_smmu 0x2186 0x0400>;
 						dma-coherent;
 					};
 
@@ -4107,15 +4060,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2147 0x04a0>,
-							 <&apps_smmu 0x2167 0x04a0>,
-							 <&apps_smmu 0x2187 0x0400>,
-							 <&apps_smmu 0x21c7 0x04a0>,
-							 <&apps_smmu 0x21e7 0x04a0>,
-							 <&apps_smmu 0x2547 0x04a0>,
-							 <&apps_smmu 0x2567 0x04a0>,
-							 <&apps_smmu 0x2587 0x0400>,
-							 <&apps_smmu 0x25c7 0x04a0>,
-							 <&apps_smmu 0x25e7 0x04a0>;
+							 <&apps_smmu 0x2187 0x0400>;
 						dma-coherent;
 					};
 
@@ -4123,15 +4068,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2148 0x04a0>,
-							 <&apps_smmu 0x2168 0x04a0>,
-							 <&apps_smmu 0x2188 0x0400>,
-							 <&apps_smmu 0x21c8 0x04a0>,
-							 <&apps_smmu 0x21e8 0x04a0>,
-							 <&apps_smmu 0x2548 0x04a0>,
-							 <&apps_smmu 0x2568 0x04a0>,
-							 <&apps_smmu 0x2588 0x0400>,
-							 <&apps_smmu 0x25c8 0x04a0>,
-							 <&apps_smmu 0x25e8 0x04a0>;
+							 <&apps_smmu 0x2188 0x0400>;
 						dma-coherent;
 					};
 
@@ -4139,31 +4076,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2149 0x04a0>,
-							 <&apps_smmu 0x2169 0x04a0>,
-							 <&apps_smmu 0x2189 0x0400>,
-							 <&apps_smmu 0x21c9 0x04a0>,
-							 <&apps_smmu 0x21e9 0x04a0>,
-							 <&apps_smmu 0x2549 0x04a0>,
-							 <&apps_smmu 0x2569 0x04a0>,
-							 <&apps_smmu 0x2589 0x0400>,
-							 <&apps_smmu 0x25c9 0x04a0>,
-							 <&apps_smmu 0x25e9 0x04a0>;
-						dma-coherent;
-					};
-
-					compute-cb@10 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <10>;
-						iommus = <&apps_smmu 0x214a 0x04a0>,
-							 <&apps_smmu 0x216a 0x04a0>,
-							 <&apps_smmu 0x218a 0x0400>,
-							 <&apps_smmu 0x21ca 0x04a0>,
-							 <&apps_smmu 0x21ea 0x04a0>,
-							 <&apps_smmu 0x254a 0x04a0>,
-							 <&apps_smmu 0x256a 0x04a0>,
-							 <&apps_smmu 0x258a 0x0400>,
-							 <&apps_smmu 0x25ca 0x04a0>,
-							 <&apps_smmu 0x25ea 0x04a0>;
+							 <&apps_smmu 0x2189 0x0400>;
 						dma-coherent;
 					};
 
@@ -4171,15 +4084,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x214b 0x04a0>,
-							 <&apps_smmu 0x216b 0x04a0>,
-							 <&apps_smmu 0x218b 0x0400>,
-							 <&apps_smmu 0x21cb 0x04a0>,
-							 <&apps_smmu 0x21eb 0x04a0>,
-							 <&apps_smmu 0x254b 0x04a0>,
-							 <&apps_smmu 0x256b 0x04a0>,
-							 <&apps_smmu 0x258b 0x0400>,
-							 <&apps_smmu 0x25cb 0x04a0>,
-							 <&apps_smmu 0x25eb 0x04a0>;
+							 <&apps_smmu 0x218b 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -4239,15 +4144,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2941 0x04a0>,
-							 <&apps_smmu 0x2961 0x04a0>,
-							 <&apps_smmu 0x2981 0x0400>,
-							 <&apps_smmu 0x29c1 0x04a0>,
-							 <&apps_smmu 0x29e1 0x04a0>,
-							 <&apps_smmu 0x2d41 0x04a0>,
-							 <&apps_smmu 0x2d61 0x04a0>,
-							 <&apps_smmu 0x2d81 0x0400>,
-							 <&apps_smmu 0x2dc1 0x04a0>,
-							 <&apps_smmu 0x2de1 0x04a0>;
+							 <&apps_smmu 0x2981 0x0400>;
 						dma-coherent;
 					};
 
@@ -4255,15 +4152,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2942 0x04a0>,
-							 <&apps_smmu 0x2962 0x04a0>,
-							 <&apps_smmu 0x2982 0x0400>,
-							 <&apps_smmu 0x29c2 0x04a0>,
-							 <&apps_smmu 0x29e2 0x04a0>,
-							 <&apps_smmu 0x2d42 0x04a0>,
-							 <&apps_smmu 0x2d62 0x04a0>,
-							 <&apps_smmu 0x2d82 0x0400>,
-							 <&apps_smmu 0x2dc2 0x04a0>,
-							 <&apps_smmu 0x2de2 0x04a0>;
+							 <&apps_smmu 0x2982 0x0400>;
 						dma-coherent;
 					};
 
@@ -4271,15 +4160,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2943 0x04a0>,
-							 <&apps_smmu 0x2963 0x04a0>,
-							 <&apps_smmu 0x2983 0x0400>,
-							 <&apps_smmu 0x29c3 0x04a0>,
-							 <&apps_smmu 0x29e3 0x04a0>,
-							 <&apps_smmu 0x2d43 0x04a0>,
-							 <&apps_smmu 0x2d63 0x04a0>,
-							 <&apps_smmu 0x2d83 0x0400>,
-							 <&apps_smmu 0x2dc3 0x04a0>,
-							 <&apps_smmu 0x2de3 0x04a0>;
+							 <&apps_smmu 0x2983 0x0400>;
 						dma-coherent;
 					};
 
@@ -4287,15 +4168,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2944 0x04a0>,
-							 <&apps_smmu 0x2964 0x04a0>,
-							 <&apps_smmu 0x2984 0x0400>,
-							 <&apps_smmu 0x29c4 0x04a0>,
-							 <&apps_smmu 0x29e4 0x04a0>,
-							 <&apps_smmu 0x2d44 0x04a0>,
-							 <&apps_smmu 0x2d64 0x04a0>,
-							 <&apps_smmu 0x2d84 0x0400>,
-							 <&apps_smmu 0x2dc4 0x04a0>,
-							 <&apps_smmu 0x2de4 0x04a0>;
+							 <&apps_smmu 0x2984 0x0400>;
 						dma-coherent;
 					};
 
@@ -4303,15 +4176,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2945 0x04a0>,
-							 <&apps_smmu 0x2965 0x04a0>,
-							 <&apps_smmu 0x2985 0x0400>,
-							 <&apps_smmu 0x29c5 0x04a0>,
-							 <&apps_smmu 0x29e5 0x04a0>,
-							 <&apps_smmu 0x2d45 0x04a0>,
-							 <&apps_smmu 0x2d65 0x04a0>,
-							 <&apps_smmu 0x2d85 0x0400>,
-							 <&apps_smmu 0x2dc5 0x04a0>,
-							 <&apps_smmu 0x2de5 0x04a0>;
+							 <&apps_smmu 0x2985 0x0400>;
 						dma-coherent;
 					};
 
@@ -4319,15 +4184,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2946 0x04a0>,
-							 <&apps_smmu 0x2966 0x04a0>,
-							 <&apps_smmu 0x2986 0x0400>,
-							 <&apps_smmu 0x29c6 0x04a0>,
-							 <&apps_smmu 0x29e6 0x04a0>,
-							 <&apps_smmu 0x2d46 0x04a0>,
-							 <&apps_smmu 0x2d66 0x04a0>,
-							 <&apps_smmu 0x2d86 0x0400>,
-							 <&apps_smmu 0x2dc6 0x04a0>,
-							 <&apps_smmu 0x2de6 0x04a0>;
+							 <&apps_smmu 0x2986 0x0400>;
 						dma-coherent;
 					};
 
@@ -4335,15 +4192,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2947 0x04a0>,
-							 <&apps_smmu 0x2967 0x04a0>,
-							 <&apps_smmu 0x2987 0x0400>,
-							 <&apps_smmu 0x29c7 0x04a0>,
-							 <&apps_smmu 0x29e7 0x04a0>,
-							 <&apps_smmu 0x2d47 0x04a0>,
-							 <&apps_smmu 0x2d67 0x04a0>,
-							 <&apps_smmu 0x2d87 0x0400>,
-							 <&apps_smmu 0x2dc7 0x04a0>,
-							 <&apps_smmu 0x2de7 0x04a0>;
+							 <&apps_smmu 0x2987 0x0400>;
 						dma-coherent;
 					};
 
@@ -4351,15 +4200,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2948 0x04a0>,
-							 <&apps_smmu 0x2968 0x04a0>,
-							 <&apps_smmu 0x2988 0x0400>,
-							 <&apps_smmu 0x29c8 0x04a0>,
-							 <&apps_smmu 0x29e8 0x04a0>,
-							 <&apps_smmu 0x2d48 0x04a0>,
-							 <&apps_smmu 0x2d68 0x04a0>,
-							 <&apps_smmu 0x2d88 0x0400>,
-							 <&apps_smmu 0x2dc8 0x04a0>,
-							 <&apps_smmu 0x2de8 0x04a0>;
+							 <&apps_smmu 0x2988 0x0400>;
 						dma-coherent;
 					};
 
@@ -4367,15 +4208,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2949 0x04a0>,
-							 <&apps_smmu 0x2969 0x04a0>,
-							 <&apps_smmu 0x2989 0x0400>,
-							 <&apps_smmu 0x29c9 0x04a0>,
-							 <&apps_smmu 0x29e9 0x04a0>,
-							 <&apps_smmu 0x2d49 0x04a0>,
-							 <&apps_smmu 0x2d69 0x04a0>,
-							 <&apps_smmu 0x2d89 0x0400>,
-							 <&apps_smmu 0x2dc9 0x04a0>,
-							 <&apps_smmu 0x2de9 0x04a0>;
+							 <&apps_smmu 0x2989 0x0400>;
 						dma-coherent;
 					};
 
@@ -4383,15 +4216,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <10>;
 						iommus = <&apps_smmu 0x294a 0x04a0>,
-							 <&apps_smmu 0x296a 0x04a0>,
-							 <&apps_smmu 0x298a 0x0400>,
-							 <&apps_smmu 0x29ca 0x04a0>,
-							 <&apps_smmu 0x29ea 0x04a0>,
-							 <&apps_smmu 0x2d4a 0x04a0>,
-							 <&apps_smmu 0x2d6a 0x04a0>,
-							 <&apps_smmu 0x2d8a 0x0400>,
-							 <&apps_smmu 0x2dca 0x04a0>,
-							 <&apps_smmu 0x2dea 0x04a0>;
+							 <&apps_smmu 0x298a 0x0400>;
 						dma-coherent;
 					};
 
@@ -4399,15 +4224,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x294b 0x04a0>,
-							 <&apps_smmu 0x296b 0x04a0>,
-							 <&apps_smmu 0x298b 0x0400>,
-							 <&apps_smmu 0x29cb 0x04a0>,
-							 <&apps_smmu 0x29eb 0x04a0>,
-							 <&apps_smmu 0x2d4b 0x04a0>,
-							 <&apps_smmu 0x2d6b 0x04a0>,
-							 <&apps_smmu 0x2d8b 0x0400>,
-							 <&apps_smmu 0x2dcb 0x04a0>,
-							 <&apps_smmu 0x2deb 0x04a0>;
+							 <&apps_smmu 0x298b 0x0400>;
 						dma-coherent;
 					};
 
@@ -4415,15 +4232,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 						iommus = <&apps_smmu 0x294c 0x04a0>,
-							 <&apps_smmu 0x296c 0x04a0>,
-							 <&apps_smmu 0x298c 0x0400>,
-							 <&apps_smmu 0x29cc 0x04a0>,
-							 <&apps_smmu 0x29ec 0x04a0>,
-							 <&apps_smmu 0x2d4c 0x04a0>,
-							 <&apps_smmu 0x2d6c 0x04a0>,
-							 <&apps_smmu 0x2d8c 0x0400>,
-							 <&apps_smmu 0x2dcc 0x04a0>,
-							 <&apps_smmu 0x2dec 0x04a0>;
+							 <&apps_smmu 0x298c 0x0400>;
 						dma-coherent;
 					};
 
@@ -4431,15 +4240,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 						iommus = <&apps_smmu 0x294d 0x04a0>,
-							 <&apps_smmu 0x296d 0x04a0>,
-							 <&apps_smmu 0x298d 0x0400>,
-							 <&apps_smmu 0x29Cd 0x04a0>,
-							 <&apps_smmu 0x29ed 0x04a0>,
-							 <&apps_smmu 0x2d4d 0x04a0>,
-							 <&apps_smmu 0x2d6d 0x04a0>,
-							 <&apps_smmu 0x2d8d 0x0400>,
-							 <&apps_smmu 0x2dcd 0x04a0>,
-							 <&apps_smmu 0x2ded 0x04a0>;
+							 <&apps_smmu 0x298d 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -5587,7 +5388,7 @@
 		      <0x0 0x40000000 0x0 0xf20>,
 		      <0x0 0x40000f20 0x0 0xa8>,
 		      <0x0 0x40001000 0x0 0x4000>,
-		      <0x0 0x40200000 0x0 0x100000>,
+		      <0x0 0x40200000 0x0 0x1fe00000>,
 		      <0x0 0x01c03000 0x0 0x1000>,
 		      <0x0 0x40005000 0x0 0x2000>;
 		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
@@ -5744,7 +5545,7 @@
 		      <0x0 0x60000000 0x0 0xf20>,
 		      <0x0 0x60000f20 0x0 0xa8>,
 		      <0x0 0x60001000 0x0 0x4000>,
-		      <0x0 0x60200000 0x0 0x100000>,
+		      <0x0 0x60200000 0x0 0x1fe00000>,
 		      <0x0 0x01c13000 0x0 0x1000>,
 		      <0x0 0x60005000 0x0 0x2000>;
 		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
index ee35a454dbf6..59162b3afcb8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
@@ -6,82 +6,82 @@
  * by Qualcomm firmware.
  */
 
-&CPU0 {
+&cpu0 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU1 {
+&cpu1 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU2 {
+&cpu2 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU3 {
+&cpu3 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU4 {
+&cpu4 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU5 {
+&cpu5 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU6 {
+&cpu6 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU7 {
+&cpu7 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
 /delete-node/ &domain_idle_states;
 
 &idle_states {
-	CLUSTER_SLEEP_0: cluster-sleep-0 {
+	cluster_sleep_0: cluster-sleep-0 {
 		compatible = "arm,idle-state";
 		idle-state-name = "cluster-power-down";
 		arm,psci-suspend-param = <0x40003444>;
@@ -92,15 +92,15 @@
 	};
 };
 
-/delete-node/ &CPU_PD0;
-/delete-node/ &CPU_PD1;
-/delete-node/ &CPU_PD2;
-/delete-node/ &CPU_PD3;
-/delete-node/ &CPU_PD4;
-/delete-node/ &CPU_PD5;
-/delete-node/ &CPU_PD6;
-/delete-node/ &CPU_PD7;
-/delete-node/ &CLUSTER_PD;
+/delete-node/ &cpu_pd0;
+/delete-node/ &cpu_pd1;
+/delete-node/ &cpu_pd2;
+/delete-node/ &cpu_pd3;
+/delete-node/ &cpu_pd4;
+/delete-node/ &cpu_pd5;
+/delete-node/ &cpu_pd6;
+/delete-node/ &cpu_pd7;
+/delete-node/ &cluster_pd;
 
 &apps_rsc {
 	/delete-property/ power-domains;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 3c124bbe2f4c..25b17b0425f2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -53,14 +53,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index b2df22faafe8..f57976906d63 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -71,14 +71,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index ac8d4589e3fb..f7300ffbb451 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -12,11 +12,11 @@
 
 / {
 	thermal-zones {
-		5v-choke-thermal {
+		choke-5v-thermal {
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
-				5v-choke-crit {
+				choke-5v-crit {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 00229b1515e6..ff8996b4de4e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -78,6 +78,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_rst>;
 		avdd-supply = <&ppvar_lcd>;
+		avee-supply = <&ppvar_lcd>;
 		pp1800-supply = <&v1p8_disp>;
 		pp3300-supply = <&pp3300_dx_edp>;
 		backlight = <&backlight>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index af89d80426ab..d4925be3b1fc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -78,14 +78,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index b5ebf8980325..249b257fc6a7 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -77,28 +77,28 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -106,206 +106,206 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -313,7 +313,7 @@
 		idle_states: idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -323,7 +323,7 @@
 				local-timer-stop;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -333,7 +333,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -343,7 +343,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -355,7 +355,7 @@
 		};
 
 		domain_idle_states: domain-idle-states {
-			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+			cluster_sleep_pc: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-l3-power-collapse";
 				arm,psci-suspend-param = <0x41000044>;
@@ -364,7 +364,7 @@
 				min-residency-us = <6118>;
 			};
 
-			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+			cluster_sleep_cx_ret: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-cx-retention";
 				arm,psci-suspend-param = <0x41001244>;
@@ -373,7 +373,7 @@
 				min-residency-us = <8467>;
 			};
 
-			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+			cluster_aoss_sleep: cluster-sleep-2 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-power-down";
 				arm,psci-suspend-param = <0x4100b244>;
@@ -583,59 +583,59 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD1: cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD2: cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD3: cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD4: cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD5: cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD6: cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD7: cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CLUSTER_PD: cpu-cluster0 {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_PC
-					      &CLUSTER_SLEEP_CX_RET
-					      &CLUSTER_AOSS_SLEEP>;
+			domain-idle-states = <&cluster_sleep_pc
+					      &cluster_sleep_cx_ret
+					      &cluster_aoss_sleep>;
 		};
 	};
 
@@ -2546,7 +2546,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2566,7 +2566,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2586,7 +2586,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2606,7 +2606,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2626,7 +2626,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2646,7 +2646,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2666,7 +2666,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2686,7 +2686,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3734,7 +3734,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sc7180-rpmh-clk";
@@ -4063,21 +4063,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4111,21 +4111,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4159,21 +4159,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4207,21 +4207,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4255,21 +4255,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4303,21 +4303,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4351,13 +4351,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4391,13 +4391,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4431,13 +4431,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu8_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu8_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4471,13 +4471,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu9_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu9_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 3d8410683402..8fbc95cf63fe 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -83,7 +83,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 0e9429684dd9..60f71b490261 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3889,7 +3889,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sc8180x-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 0df9695e21e4..6ad58ec82310 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -1131,9 +1131,6 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"VA DMIC0", "VA MIC BIAS1",
-		"VA DMIC1", "VA MIC BIAS1",
-		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 80a57aa22839..b1e0e51a5582 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2725,7 +2725,7 @@
 
 		remoteproc_adsp: remoteproc@3000000 {
 			compatible = "qcom,sc8280xp-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0 0x03000000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3882,26 +3882,26 @@
 				    "vfe3",
 				    "csid3";
 
-			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 762 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 764 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid1_lite",
 					  "vfe_lite1",
 					  "csiphy3",
@@ -5205,7 +5205,7 @@
 
 		remoteproc_nsp0: remoteproc@1b300000 {
 			compatible = "qcom,sc8280xp-nsp0-pas";
-			reg = <0 0x1b300000 0 0x100>;
+			reg = <0 0x1b300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5336,7 +5336,7 @@
 
 		remoteproc_nsp1: remoteproc@21300000 {
 			compatible = "qcom,sc8280xp-nsp1-pas";
-			reg = <0 0x21300000 0 0x100>;
+			reg = <0 0x21300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 7d34e732f64d..af4213aec86e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -104,7 +104,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_l10a_1p8";
 		regulator-min-microvolt = <1804000>;
-		regulator-max-microvolt = <1896000>;
+		regulator-max-microvolt = <1804000>;
 		regulator-always-on;
 		regulator-boot-on;
 	};
@@ -167,6 +167,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp1_uart2 {
@@ -179,6 +180,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp2_uart1 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 7167f75bced3..a9926ad6c6f9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -107,6 +107,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -404,6 +405,8 @@
 &sdhc_2 {
 	status = "okay";
 
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
 	vmmc-supply = <&vreg_l5b_2p95>;
 	vqmmc-supply = <&vreg_l2b_2p95>;
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
similarity index 57%
rename from arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
rename to arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index a21caa6f3fa2..51f1a4883ab8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -4,8 +4,10 @@
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "sdm845-db845c.dts"
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/gpio/gpio.h>
 
 &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
@@ -28,6 +30,9 @@
 };
 
 &cci_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@10 {
 		compatible = "ovti,ov8856";
 		reg = <0x10>;
@@ -63,42 +68,3 @@
 		};
 	};
 };
-
-&cci_i2c1 {
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		/* I2C address as per ov7251.txt linux documentation */
-		reg = <0x60>;
-
-		/* CAM3_RST_N */
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/*
-		 * The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disabled";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-/*				remote-endpoint = <&csiphy3_ep>; */
-			};
-		};
-	};
-};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..5948b401165c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -135,8 +135,6 @@
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +155,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:
@@ -383,8 +382,8 @@
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
@@ -418,16 +417,9 @@
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-	status = "okay";
-};
-
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 54077549b9da..0a0cef9dfcc4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4326,16 +4326,16 @@
 				"vfe1",
 				"vfe_lite";
 
-			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid0",
 				"csid1",
 				"csid2",
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 7cf3fcb469a8..60a5d6d3ca7c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -34,7 +34,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -893,7 +893,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx75-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>;
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
index 1e05cd00b635..0bbacab6842c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -29,7 +29,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 41216cc319d6..4adadfd1e51a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -2027,7 +2027,7 @@
 
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,sm6115-mpss-pas";
-			reg = <0x0 0x06080000 0x0 0x100>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2670,9 +2670,9 @@
 			};
 		};
 
-		remoteproc_adsp: remoteproc@ab00000 {
+		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6115-adsp-pas";
-			reg = <0x0 0x0ab00000 0x0 0x100>;
+			reg = <0x0 0x0a400000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2744,7 +2744,7 @@
 
 		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6115-cdsp-pas";
-			reg = <0x0 0x0b300000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 133610d14fc4..1f7fd429ad42 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 7986ddb30f6e..10418fccfea2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -936,7 +936,7 @@
 				power-domains = <&rpmhpd SM6350_CX>;
 				operating-points-v2 = <&qup_opp_table>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1283,7 +1283,7 @@
 
 		adsp: remoteproc@3000000 {
 			compatible = "qcom,sm6350-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0x0 0x03000000 0x0 0x10000>;
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1376,43 +1376,43 @@
 				opp-850000000 {
 					opp-hz = /bits/ 64 <850000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x03>;
 				};
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-supported-hw = <0x04>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-supported-hw = <0x08>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-supported-hw = <0x10>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-253000000 {
 					opp-hz = /bits/ 64 <253000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 			};
 		};
@@ -1503,7 +1503,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 4d519dd6e7ef..01371f41f790 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -29,7 +29,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -1516,9 +1516,9 @@
 			#power-domain-cells = <1>;
 		};
 
-		remoteproc_mss: remoteproc@6000000 {
+		remoteproc_mss: remoteproc@6080000 {
 			compatible = "qcom,sm6375-mpss-pas";
-			reg = <0 0x06000000 0 0x4040>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1559,7 +1559,7 @@
 
 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
-			reg = <0 0x0a400000 0 0x100>;
+			reg = <0 0x0a400000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1595,9 +1595,9 @@
 			};
 		};
 
-		remoteproc_cdsp: remoteproc@b000000 {
+		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6375-cdsp-pas";
-			reg = <0x0 0x0b000000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi
index 12dd72859a43..a53145a610a3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi
@@ -6,11 +6,11 @@
 #include "sc7180.dtsi"
 
 /* SM7125 uses Kryo 465 instead of Kryo 468 */
-&CPU0 { compatible = "qcom,kryo465"; };
-&CPU1 { compatible = "qcom,kryo465"; };
-&CPU2 { compatible = "qcom,kryo465"; };
-&CPU3 { compatible = "qcom,kryo465"; };
-&CPU4 { compatible = "qcom,kryo465"; };
-&CPU5 { compatible = "qcom,kryo465"; };
-&CPU6 { compatible = "qcom,kryo465"; };
-&CPU7 { compatible = "qcom,kryo465"; };
+&cpu0 { compatible = "qcom,kryo465"; };
+&cpu1 { compatible = "qcom,kryo465"; };
+&cpu2 { compatible = "qcom,kryo465"; };
+&cpu3 { compatible = "qcom,kryo465"; };
+&cpu4 { compatible = "qcom,kryo465"; };
+&cpu5 { compatible = "qcom,kryo465"; };
+&cpu6 { compatible = "qcom,kryo465"; };
+&cpu7 { compatible = "qcom,kryo465"; };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f59ab670061d..97e2c25b8fa3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -32,7 +32,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,msm-id = <459 0x10000>;
 	qcom,board-id = <8 32>;
 
 	aliases {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index b53080ed65f8..d7295fdf58ee 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -376,8 +376,8 @@
 		pinctrl-0 = <&da7280_intr_default>;
 
 		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
+		dlg,const-op-mode = <1>;
+		dlg,periodic-op-mode = <1>;
 		dlg,nom-microvolt = <2000000>;
 		dlg,abs-max-microvolt = <2000000>;
 		dlg,imax-microamp = <129000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 630f4eff20bf..e17937f76806 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -84,7 +84,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -606,7 +606,7 @@
 		};
 
 		cpu7_opp9: opp-1747200000 {
-			opp-hz = /bits/ 64 <1708800000>;
+			opp-hz = /bits/ 64 <1747200000>;
 			opp-peak-kBps = <5412000 42393600>;
 		};
 
@@ -4481,20 +4481,20 @@
 				    "vfe_lite0",
 				    "vfe_lite1";
 
-			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 					  "csiphy1",
 					  "csiphy2",
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 37a2aba0d4ca..0be8f2befec7 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -42,7 +42,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -455,7 +455,7 @@
 			no-map;
 		};
 
-		pil_camera_mem: mmeory@85200000 {
+		pil_camera_mem: memory@85200000 {
 			reg = <0x0 0x85200000 0x0 0x500000>;
 			no-map;
 		};
@@ -1806,11 +1806,11 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x594 0x0011>,
 				 <&apps_smmu 0x596 0x0011>;
-			/* FIXME: Probing BAM DMA causes some abort and system hang */
-			status = "fail";
 		};
 
 		crypto: crypto@1dfa000 {
@@ -1822,8 +1822,6 @@
 				 <&apps_smmu 0x596 0x0011>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "memory";
-			/* FIXME: dependency BAM DMA is disabled */
-			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -1876,6 +1874,142 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <0>;
+							};
+
+							dai@1 {
+								reg = <1>;
+							};
+
+							dai@2 {
+								reg = <2>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -2078,7 +2212,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2360,6 +2494,115 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		cdsp: remoteproc@a300000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0x0 0x0a300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3284,142 +3527,6 @@
 				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		adsp: remoteproc@17300000 {
-			compatible = "qcom,sm8350-adsp-pas";
-			reg = <0 0x17300000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&pil_adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				apr {
-					compatible = "qcom,apr-v2";
-					qcom,glink-channels = "apr_audio_svc";
-					qcom,domain = <APR_DOMAIN_ADSP>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					service@3 {
-						reg = <APR_SVC_ADSP_CORE>;
-						compatible = "qcom,q6core";
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					};
-
-					q6afe: service@4 {
-						compatible = "qcom,q6afe";
-						reg = <APR_SVC_AFE>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6afedai: dais {
-							compatible = "qcom,q6afe-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-						};
-
-						q6afecc: clock-controller {
-							compatible = "qcom,q6afe-clocks";
-							#clock-cells = <2>;
-						};
-					};
-
-					q6asm: service@7 {
-						compatible = "qcom,q6asm";
-						reg = <APR_SVC_ASM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6asmdai: dais {
-							compatible = "qcom,q6asm-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-							iommus = <&apps_smmu 0x1801 0x0>;
-
-							dai@0 {
-								reg = <0>;
-							};
-
-							dai@1 {
-								reg = <1>;
-							};
-
-							dai@2 {
-								reg = <2>;
-							};
-						};
-					};
-
-					q6adm: service@8 {
-						compatible = "qcom,q6adm";
-						reg = <APR_SVC_ADM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6routing: routing {
-							compatible = "qcom,q6adm-routing";
-							#sound-dai-cells = <0>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -3588,115 +3695,6 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
-
-		cdsp: remoteproc@98900000 {
-			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x98900000 0 0x1400000>;
-
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
-			power-domain-names = "cx", "mxc";
-
-			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&pil_cdsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_cdsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_CDSP
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "cdsp";
-				qcom,remote-pid = <5>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "cdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x2161 0x0400>,
-							 <&apps_smmu 0x1181 0x0420>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x2162 0x0400>,
-							 <&apps_smmu 0x1182 0x0420>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2163 0x0400>,
-							 <&apps_smmu 0x1183 0x0420>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2164 0x0400>,
-							 <&apps_smmu 0x1184 0x0420>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2165 0x0400>,
-							 <&apps_smmu 0x1185 0x0420>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x2166 0x0400>,
-							 <&apps_smmu 0x1186 0x0420>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x2167 0x0400>,
-							 <&apps_smmu 0x1187 0x0420>;
-					};
-
-					compute-cb@8 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <8>;
-						iommus = <&apps_smmu 0x2168 0x0400>,
-							 <&apps_smmu 0x1188 0x0420>;
-					};
-
-					/* note: secure cb9 in downstream */
-				};
-			};
-		};
 	};
 
 	thermal_zones: thermal-zones {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 38cb524cc568..58ed68f534e5 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -43,7 +43,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -2492,6 +2492,112 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		wsa2macro: codec@31e0000 {
 			compatible = "qcom,sm8450-lpass-wsa-macro";
 			reg = <0 0x031e0000 0 0x1000>;
@@ -2688,115 +2794,9 @@
 			status = "disabled";
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1801 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0 0x32300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2903,7 +2903,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8450-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -4553,6 +4553,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x584 0x11>,
 				 <&apps_smmu 0x588 0x0>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 6e6fc67ac728..ed283a946181 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -1172,7 +1172,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 314f546d1a74..d2f38a011d85 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -825,7 +825,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 77b59f88551f..7c119e216698 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -1005,7 +1005,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index e1b0d3fa1844..bed53aaaab7d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -565,7 +565,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index a2076ee4c820..2e7f4fa64f55 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -722,7 +722,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 9dc0ee3eb98f..cfdd30009015 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1952,6 +1952,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
@@ -2313,7 +2315,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2353,6 +2355,137 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -2871,9 +3004,8 @@
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
-					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";
 
 			iommus = <&apps_smmu 0x1c00 0x2>;
 
@@ -4575,137 +4707,6 @@
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8550-adsp-pas";
-			reg = <0x0 0x30000000 0x0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1063 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1064 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1065 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1066 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x1007 0x80>,
-							 <&apps_smmu 0x1067 0x0>;
-						dma-coherent;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@320c0000 {
 			compatible = "qcom,sm8550-nsp-noc";
 			reg = <0 0x320c0000 0 0xe080>;
@@ -4715,7 +4716,7 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8550-cdsp-pas";
-			reg = <0x0 0x32300000 0x0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650-hdk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
index 77d4fb3b71a4..336703625af3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
@@ -1117,7 +1117,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index aea4afab8a33..a4a399790665 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -734,7 +734,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index 3a0b1d576e0b..50c63a8b1c20 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -1045,7 +1045,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &spi4 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 01ac3769ffa6..bd91624bd3bf 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -68,18 +68,18 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a520";
 			reg = <0 0>;
 
 			clocks = <&cpufreq_hw 0>;
 
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 
@@ -87,13 +87,13 @@
 
 			#cooling-cells = <2>;
 
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 
-				L3_0: l3-cache {
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -101,18 +101,18 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a520";
 			reg = <0 0x100>;
 
 			clocks = <&cpufreq_hw 0>;
 
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 
@@ -121,18 +121,18 @@
 			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a720";
 			reg = <0 0x200>;
 
 			clocks = <&cpufreq_hw 3>;
 
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
@@ -140,46 +140,53 @@
 
 			#cooling-cells = <2>;
 
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a720";
 			reg = <0 0x300>;
 
 			clocks = <&cpufreq_hw 3>;
 
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_300>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
 			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a720";
 			reg = <0 0x400>;
 
 			clocks = <&cpufreq_hw 3>;
 
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
@@ -187,26 +194,26 @@
 
 			#cooling-cells = <2>;
 
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a720";
 			reg = <0 0x500>;
 
 			clocks = <&cpufreq_hw 1>;
 
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
@@ -214,26 +221,26 @@
 
 			#cooling-cells = <2>;
 
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a720";
 			reg = <0 0x600>;
 
 			clocks = <&cpufreq_hw 1>;
 
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
@@ -241,26 +248,26 @@
 
 			#cooling-cells = <2>;
 
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x4";
 			reg = <0 0x700>;
 
 			clocks = <&cpufreq_hw 2>;
 
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <588>;
 
@@ -268,46 +275,46 @@
 
 			#cooling-cells = <2>;
 
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -315,7 +322,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+			silver_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -325,7 +332,7 @@
 				local-timer-stop;
 			};
 
-			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+			gold_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -335,7 +342,7 @@
 				local-timer-stop;
 			};
 
-			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+			gold_plus_cpu_sleep_0: cpu-sleep-2-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-plus-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
@@ -347,7 +354,7 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			cluster_sleep_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
 				entry-latency-us = <750>;
@@ -355,7 +362,7 @@
 				min-residency-us = <9144>;
 			};
 
-			CLUSTER_SLEEP_1: cluster-sleep-1 {
+			cluster_sleep_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
 				entry-latency-us = <2800>;
@@ -411,58 +418,58 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: power-domain-cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&silver_cpu_sleep_0>;
 		};
 
-		CPU_PD1: power-domain-cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&silver_cpu_sleep_0>;
 		};
 
-		CPU_PD2: power-domain-cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
-		CPU_PD3: power-domain-cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
-		CPU_PD4: power-domain-cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
-		CPU_PD5: power-domain-cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
-		CPU_PD6: power-domain-cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
-		CPU_PD7: power-domain-cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&gold_plus_cpu_sleep_0>;
 		};
 
-		CLUSTER_PD: power-domain-cluster {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>,
-					     <&CLUSTER_SLEEP_1>;
+			domain-idle-states = <&cluster_sleep_0>,
+					     <&cluster_sleep_1>;
 		};
 	};
 
@@ -2495,6 +2502,8 @@
 				 <&apps_smmu 0x481 0>;
 
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 		};
 
@@ -2853,7 +2862,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8650-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2904,6 +2913,154 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -3455,11 +3612,11 @@
 			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
 
 			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
-					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
-					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "mdp0-mem",
-					     "mdp1-mem";
+					     "cpu-cfg";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -5083,7 +5240,7 @@
 				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
@@ -5324,154 +5481,6 @@
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8650-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx",
-					     "lmx";
-
-			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				qcom,remote-pid = <2>;
-
-				label = "lpass";
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-
-					label = "adsp";
-
-					qcom,non-secure-domain;
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1043 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1044 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1045 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1046 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-
-						iommus = <&apps_smmu 0x1007 0x40>,
-							 <&apps_smmu 0x1067 0x0>,
-							 <&apps_smmu 0x1087 0x0>;
-						dma-coherent;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@320c0000 {
 			compatible = "qcom,sm8650-nsp-noc";
 			reg = <0 0x320c0000 0 0xf080>;
@@ -5483,7 +5492,7 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8650-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5624,7 +5633,7 @@
 
 					/* note: secure cb9 in downstream */
 
-					compute-cb@10 {
+					compute-cb@12 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 
@@ -5634,7 +5643,7 @@
 						dma-coherent;
 					};
 
-					compute-cb@11 {
+					compute-cb@13 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 
@@ -5644,7 +5653,7 @@
 						dma-coherent;
 					};
 
-					compute-cb@12 {
+					compute-cb@14 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <14>;
 
@@ -6355,20 +6364,20 @@
 
 			trips {
 				gpu0_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6388,20 +6397,20 @@
 
 			trips {
 				gpu1_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6421,20 +6430,20 @@
 
 			trips {
 				gpu2_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6454,20 +6463,20 @@
 
 			trips {
 				gpu3_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6487,20 +6496,20 @@
 
 			trips {
 				gpu4_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6520,20 +6529,20 @@
 
 			trips {
 				gpu5_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6553,20 +6562,20 @@
 
 			trips {
 				gpu6_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6586,20 +6595,20 @@
 
 			trips {
 				gpu7_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 4664e090ec74..31663ef43b82 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -754,7 +754,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
 	status = "okay";
@@ -786,7 +786,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index f980fb804e1a..1a933f1e4f1a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -314,8 +314,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -591,11 +591,9 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
@@ -625,11 +623,9 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index e911c1e81907..72ef7d77f322 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -419,6 +419,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -440,6 +441,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -1147,7 +1149,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
 	status = "okay";
@@ -1179,7 +1181,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -1211,7 +1213,7 @@
 };
 
 &usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 953de0bba313..a7fd7c18a94b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -266,6 +266,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l14b_3p0: ldo14 {
@@ -280,8 +281,8 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
-
 	};
 
 	regulators-1 {
@@ -484,8 +485,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -895,11 +896,9 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
@@ -929,11 +928,9 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
@@ -963,7 +960,7 @@
 };
 
 &usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 2ff54669d561..a25073186c2c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -267,6 +267,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b: ldo13 {
@@ -288,6 +289,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b: ldo16 {
@@ -782,7 +784,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e>;
+	vdda-phy-supply = <&vreg_l2j>;
 	vdda-pll-supply = <&vreg_l1j>;
 
 	status = "okay";
@@ -814,7 +816,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e>;
+	vdda-phy-supply = <&vreg_l2j>;
 	vdda-pll-supply = <&vreg_l2d>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 2237b854add3..2f157e26687d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -356,6 +356,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -377,6 +378,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -594,8 +596,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -896,7 +898,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
 	status = "okay";
@@ -928,7 +930,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -960,7 +962,7 @@
 };
 
 &usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 0510abc0edf0..5082ecb32089 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -20,6 +20,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -38,7 +39,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 
@@ -279,8 +280,8 @@
 				idle-state-name = "ret";
 				arm,psci-suspend-param = <0x00000004>;
 				entry-latency-us = <180>;
-				exit-latency-us = <320>;
-				min-residency-us = <1000>;
+				exit-latency-us = <500>;
+				min-residency-us = <600>;
 			};
 		};
 
@@ -299,7 +300,7 @@
 				idle-state-name = "ret-pll-off";
 				arm,psci-suspend-param = <0x01000054>;
 				entry-latency-us = <2200>;
-				exit-latency-us = <2500>;
+				exit-latency-us = <4000>;
 				min-residency-us = <7000>;
 			};
 		};
@@ -2925,7 +2926,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>;
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
 			bus-range = <0x00 0xff>;
 
 			dma-coherent;
@@ -3515,6 +3516,143 @@
 			#interconnect-cells = <2>;
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,x1e80100-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&adspslpi_mem>,
+					<&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -4115,7 +4253,7 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
@@ -4141,12 +4279,14 @@
 			usb_2_dwc3: usb@a200000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a200000 0 0xcd00>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x14e0 0x0>;
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
 
+				dma-coherent;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -5752,7 +5892,7 @@
 		intc: interrupt-controller@17000000 {
 			compatible = "arm,gic-v3";
 			reg = <0 0x17000000 0 0x10000>,     /* GICD */
-			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+			      <0 0x17080000 0 0x300000>;    /* GICR * 12 */
 
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -6108,146 +6248,9 @@
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,x1e80100-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx",
-					     "lmx";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-
-			memory-region = <&adspslpi_mem>,
-					<&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1063 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1064 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1065 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1066 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x1007 0x80>,
-							 <&apps_smmu 0x1067 0x0>;
-						dma-coherent;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,x1e80100-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -6412,8 +6415,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6438,7 +6441,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6464,7 +6467,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6490,7 +6493,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6516,7 +6519,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6542,7 +6545,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6568,7 +6571,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6594,7 +6597,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6620,7 +6623,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6638,8 +6641,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6656,8 +6659,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6674,7 +6677,7 @@
 				};
 
 				mem-critical {
-					temperature = <125000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6682,15 +6685,19 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
 				trip-point0 {
-					temperature = <125000>;
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "critical";
 				};
 			};
 		};
@@ -6706,8 +6713,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6732,7 +6739,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6758,7 +6765,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6784,7 +6791,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6810,7 +6817,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6836,7 +6843,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6862,7 +6869,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6888,7 +6895,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6914,7 +6921,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6932,8 +6939,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6950,8 +6957,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6968,8 +6975,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6994,7 +7001,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7020,7 +7027,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7046,7 +7053,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7072,7 +7079,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7098,7 +7105,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7124,7 +7131,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7150,7 +7157,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7176,7 +7183,7 @@
 				};
 
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7194,8 +7201,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7212,8 +7219,8 @@
 				};
 
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7230,8 +7237,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7248,8 +7255,8 @@
 				};
 
 				nsp0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7266,8 +7273,8 @@
 				};
 
 				nsp1-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7284,8 +7291,8 @@
 				};
 
 				nsp2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7302,33 +7309,34 @@
 				};
 
 				nsp3-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		gpuss-0-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 5>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7336,25 +7344,26 @@
 		};
 
 		gpuss-1-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 6>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7362,25 +7371,26 @@
 		};
 
 		gpuss-2-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 7>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss2_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7388,25 +7398,26 @@
 		};
 
 		gpuss-3-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 8>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss3_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7414,25 +7425,26 @@
 		};
 
 		gpuss-4-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 9>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss4_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7440,25 +7452,26 @@
 		};
 
 		gpuss-5-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 10>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss5_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7466,25 +7479,26 @@
 		};
 
 		gpuss-6-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 11>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss6_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7492,25 +7506,26 @@
 		};
 
 		gpuss-7-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 12>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss7_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7529,7 +7544,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7547,7 +7562,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 68b04e56ae56..5a15a956702a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -62,8 +62,7 @@
 		compatible = "ethernet-phy-id0022.1640",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi
index 8c9da8b4bd60..191b051ecfd4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -25,8 +25,7 @@
 		compatible = "ethernet-phy-id001c.c915",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/condor-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/condor-common.dtsi
index 8b7c0c34eadc..b2d99dfaa0cd 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/condor-common.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/condor-common.dtsi
@@ -166,8 +166,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio4 23 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/draak.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/draak.dtsi
index 6f133f54ded5..402112a37d75 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/draak.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -247,8 +247,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio5 19 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
 		/*
 		 * TX clock internal delay mode is required for reliable
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi
index cba2fde9dd36..1aedd093fb41 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -314,8 +314,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 		/*
 		 * TX clock internal delay mode is required for reliable
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
index 8e2db1d6ca81..25c55b32aafe 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
@@ -69,9 +69,6 @@
 
 	status = "okay";
 
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
 	rsnd_port: port {
 		rsnd_endpoint: endpoint {
 			remote-endpoint = <&dw_hdmi0_snd_in>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
index 66f3affe0469..deb69c272775 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -84,9 +84,6 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
 	clock-frequency = <12288000 11289600>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index ad898c6db4e6..4113710d5522 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -27,8 +27,7 @@
 		compatible = "ethernet-phy-id001c.c915",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 0608dce92e40..7dd9e13cf007 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -111,8 +111,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio1 17 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index e36999e91af5..0a103f93b14d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -117,8 +117,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio1 17 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index 77d22df25fff..a8a20c748ffc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -124,8 +124,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio4 23 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index 63db822e5f46..6bd580737f25 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -31,8 +31,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio4 16 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
index 33c1015e9ab3..5d38669ed1ec 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -60,8 +60,7 @@
 				u101: ethernet-phy@1 {
 					reg = <1>;
 					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupt-parent = <&gpio3>;
-					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+					interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};
 		};
@@ -78,8 +77,7 @@
 				u201: ethernet-phy@2 {
 					reg = <2>;
 					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupt-parent = <&gpio3>;
-					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+					interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};
 		};
@@ -96,8 +94,7 @@
 				u301: ethernet-phy@3 {
 					reg = <3>;
 					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupt-parent = <&gpio3>;
-					interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+					interrupts-extended = <&gpio3 9 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
index fa910b85859e..5d71d52f9c65 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
@@ -197,8 +197,7 @@
 				ic99: ethernet-phy@1 {
 					reg = <1>;
 					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupt-parent = <&gpio3>;
-					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+					interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};
 		};
@@ -216,8 +215,7 @@
 				ic102: ethernet-phy@2 {
 					reg = <2>;
 					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupt-parent = <&gpio3>;
-					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+					interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
index e6cf304c77ee..5d820bd32ff6 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
@@ -108,7 +108,7 @@
 	};
 
 	tpu0_pins: tpu0 {
-		groups = "tpu_to0_a";
+		groups = "tpu_to0_b";
 		function = "tpu";
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts
index 50a428572d9b..48befde38937 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts
@@ -7,71 +7,10 @@
 
 /dts-v1/;
 #include "r8a779g2.dtsi"
-#include "white-hawk-cpu-common.dtsi"
-#include "white-hawk-common.dtsi"
+#include "white-hawk-single.dtsi"
 
 / {
 	model = "Renesas White Hawk Single board based on r8a779g2";
 	compatible = "renesas,white-hawk-single", "renesas,r8a779g2",
 		     "renesas,r8a779g0";
 };
-
-&hscif0 {
-	uart-has-rtscts;
-};
-
-&hscif0_pins {
-	groups = "hscif0_data", "hscif0_ctrl";
-	function = "hscif0";
-};
-
-&pfc {
-	tsn0_pins: tsn0 {
-		mux {
-			groups = "tsn0_link", "tsn0_mdio", "tsn0_rgmii",
-				 "tsn0_txcrefclk";
-			function = "tsn0";
-		};
-
-		link {
-			groups = "tsn0_link";
-			bias-disable;
-		};
-
-		mdio {
-			groups = "tsn0_mdio";
-			drive-strength = <24>;
-			bias-disable;
-		};
-
-		rgmii {
-			groups = "tsn0_rgmii";
-			drive-strength = <24>;
-			bias-disable;
-		};
-	};
-};
-
-&tsn0 {
-	pinctrl-0 = <&tsn0_pins>;
-	pinctrl-names = "default";
-	phy-mode = "rgmii";
-	phy-handle = <&phy3>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		reset-post-delay-us = <4000>;
-
-		phy3: ethernet-phy@0 {
-			compatible = "ethernet-phy-id002b.0980",
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
index 9a1917b87f61..f4d721a7f505 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -175,8 +175,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 83f5642d0d35..502d9f17bf16 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -102,8 +102,7 @@
 		compatible = "ethernet-phy-id0022.1640",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
-		interrupt-parent = <&irqc>;
-		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
@@ -130,8 +129,7 @@
 		compatible = "ethernet-phy-id0022.1640",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
-		interrupt-parent = <&irqc>;
-		interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index b4ef5ea8a9e3..de39311a77dc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -82,8 +82,7 @@
 		compatible = "ethernet-phy-id0022.1640",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
-		interrupt-parent = <&irqc>;
-		interrupts = <RZG2L_IRQ0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc RZG2L_IRQ0 IRQ_TYPE_LEVEL_LOW>;
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
index 79443fb3f581..1a6fd58bd368 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -78,8 +78,7 @@
 		compatible = "ethernet-phy-id0022.1640",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
-		interrupt-parent = <&irqc>;
-		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
@@ -107,8 +106,7 @@
 		compatible = "ethernet-phy-id0022.1640",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
-		interrupt-parent = <&irqc>;
-		interrupts = <RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>;
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 21bfa4e03972..d2d367c09abd 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -42,11 +42,6 @@
 #endif
 	};
 
-	chosen {
-		bootargs = "ignore_loglevel";
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory@48000000 {
 		device_type = "memory";
 		/* First 128MB is reserved for secure area. */
@@ -103,8 +98,7 @@
 
 	phy0: ethernet-phy@7 {
 		reg = <7>;
-		interrupt-parent = <&pinctrl>;
-		interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pinctrl RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
 		rxc-skew-psec = <0>;
 		txc-skew-psec = <0>;
 		rxdv-skew-psec = <0>;
@@ -129,8 +123,7 @@
 
 	phy1: ethernet-phy@7 {
 		reg = <7>;
-		interrupt-parent = <&pinctrl>;
-		interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pinctrl RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
 		rxc-skew-psec = <0>;
 		txc-skew-psec = <0>;
 		rxdv-skew-psec = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index 7945d44e6ee1..af2ab1629104 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -12,10 +12,15 @@
 / {
 	aliases {
 		i2c0 = &i2c0;
-		serial0 = &scif0;
+		serial3 = &scif0;
 		mmc1 = &sdhi1;
 	};
 
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial3:115200n8";
+	};
+
 	keys {
 		compatible = "gpio-keys";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 1eb4883b3219..c5035232956a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -353,8 +353,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
index a2f66f916048..4cf141a701c0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -150,8 +150,7 @@
 			     "ethernet-phy-ieee802.3-c22";
 		rxc-skew-ps = <1500>;
 		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
index 3845b413bd24..69e4fddebd4e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
@@ -167,8 +167,7 @@
 				     "ethernet-phy-ieee802.3-c22";
 			rxc-skew-ps = <1500>;
 			reg = <0>;
-			interrupt-parent = <&gpio7>;
-			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi
index 595ec4ff4cdd..ad94bf3f5e6c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/white-hawk-ethernet.dtsi
@@ -29,8 +29,7 @@
 		avb1_phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c45";
 			reg = <0>;
-			interrupt-parent = <&gpio6>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -51,8 +50,7 @@
 		avb2_phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c45";
 			reg = <0>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
new file mode 100644
index 000000000000..976a3ab44e5a
--- /dev/null
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk Single board
+ *
+ * Copyright (C) 2023-2024 Glider bv
+ */
+
+#include "white-hawk-cpu-common.dtsi"
+#include "white-hawk-common.dtsi"
+
+/ {
+	model = "Renesas White Hawk Single board";
+	compatible = "renesas,white-hawk-single";
+
+	aliases {
+		ethernet3 = &tsn0;
+	};
+};
+
+&hscif0 {
+	uart-has-rtscts;
+};
+
+&hscif0_pins {
+	groups = "hscif0_data", "hscif0_ctrl";
+	function = "hscif0";
+};
+
+&pfc {
+	tsn0_pins: tsn0 {
+		mux {
+			groups = "tsn0_link", "tsn0_mdio", "tsn0_rgmii",
+				 "tsn0_txcrefclk";
+			function = "tsn0";
+		};
+
+		link {
+			groups = "tsn0_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "tsn0_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "tsn0_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+};
+
+&tsn0 {
+	pinctrl-0 = <&tsn0_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii";
+	phy-handle = <&tsn0_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		tsn0_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id002b.0980",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupts-extended = <&gpio4 3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
index ae398acdcf45..3d5e81a0afdc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -194,6 +194,13 @@
 			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	uart {
+		uart5_rts_pin: uart5-rts-pin {
+			rockchip,pins =
+			  <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm0 {
@@ -222,11 +229,15 @@
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };
 
 &uart5 {
-	pinctrl-0 = <&uart5_xfer>;
+	/* Add pinmux for rts-gpios (uart5_rts_pin) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_xfer &uart5_rts_pin>;
 	rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
index b7163ed74232..f743aaf78359 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -373,6 +373,12 @@
 	status = "okay";
 };
 
+&uart5 {
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	pinctrl-0 = <&uart5_xfer>;
+};
+
 /* Mule UCAN */
 &usb_host0_ehci {
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts
index bd6419a5c20a..8311af4c8689 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts
@@ -74,6 +74,23 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
+	/*
+	 * HW revision prior to v1.2 must pull GPIO4_D6 low to access sdmmc.
+	 * This is modeled as an always-on active low fixed regulator.
+	 */
+	vcc_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_2030>;
+		regulator-name = "vcc_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc5v0_sys: regulator-5v0-vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -181,6 +198,12 @@
 		};
 	};
 
+	sdmmc {
+		sdmmc_2030: sdmmc-2030 {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	wifi {
 		wifi_reg_on: wifi-reg-on {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -233,7 +256,7 @@
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	disable-wp;
-	vmmc-supply = <&vcc_io>;
+	vmmc-supply = <&vcc_sd>;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 4237f2ee8fee..f57d4acd9807 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -15,9 +15,11 @@
 };
 
 &gmac2io {
+	/delete-property/ tx_delay;
+	/delete-property/ rx_delay;
+
 	phy-handle = <&yt8531c>;
-	tx_delay = <0x19>;
-	rx_delay = <0x05>;
+	phy-mode = "rgmii-id";
 
 	mdio {
 		/delete-node/ ethernet-phy@1;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index c01a4cad48f3..d16a13d6442f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -333,6 +333,7 @@
 
 			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
+				clocks = <&cru SCLK_VENC_CORE>;
 				#power-domain-cells = <0>;
 			};
 			power-domain@RK3328_PD_VIDEO {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index fe5b52610010..6a6b36c36ce2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -117,7 +117,7 @@
 };
 
 &u2phy1_host {
-	status = "disabled";
+	phy-supply = <&vdd_5v>;
 };
 
 &uart0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index f6f15946579e..57466fbfd3f9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -284,14 +284,6 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &vopb {
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 650b1ba9c192..0a73218ea37b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -59,17 +59,7 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
+	vcc5v0_sys: regulator-vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
@@ -181,7 +171,7 @@
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;
-	rx_delay = <0x10>;
+	rx_delay = <0x23>;
 	status = "okay";
 };
 
@@ -509,10 +499,10 @@
 		};
 	};
 
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
+	usb {
+		cy3304_reset: cy3304-reset {
 			rockchip,pins =
-			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
@@ -579,7 +569,6 @@
 	};
 
 	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
 		status = "okay";
 	};
 };
@@ -591,6 +580,29 @@
 &usbdrd_dwc3_1 {
 	status = "okay";
 	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cy3304_reset>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
+
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
+	};
 };
 
 &usb_host1_ehci {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 11d99d8b34a2..66d010a9e8c3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -227,6 +227,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -312,6 +322,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vcca_0v9>;
+	avdd-1v8-supply = <&vcc1v8_dvp>;
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_cec>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 9a2f59a351de..48ccdd6b4711 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -512,7 +512,6 @@
 
 &sdmmc0 {
 	max-frequency = <150000000>;
-	supports-sd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
index f2cc086e5001..887c9be1b410 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
@@ -636,6 +636,7 @@
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index 93189f830640..c30354268c8f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -486,9 +486,12 @@
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
 	non-removable;
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
index ebcaeafc3800..fa61633aea15 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
@@ -49,7 +49,6 @@
 
 	vcc3v3_eth: vcc3v3-eth-regulator {
 		compatible = "regulator-fixed";
-		enable-active-low;
 		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc3v3_eth_enn>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
index 170b14f92f51..f9ef0af8aa1a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
@@ -53,7 +53,7 @@
 
 	pdm_codec: pdm-codec {
 		compatible = "dmic-codec";
-		num-channels = <1>;
+		num-channels = <2>;
 		#sound-dai-cells = <0>;
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 0946310e8c12..6fd67ae27117 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -262,6 +262,7 @@
 		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_PIPEPHY0>;
+		reset-names = "phy";
 		rockchip,pipe-grf = <&pipegrf>;
 		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
 		#phy-cells = <1>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 0ee0ada6f0ab..bc0f57a26c2f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -1762,6 +1762,7 @@
 		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_PIPEPHY1>;
+		reset-names = "phy";
 		rockchip,pipe-grf = <&pipegrf>;
 		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
 		#phy-cells = <1>;
@@ -1778,6 +1779,7 @@
 		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_PIPEPHY2>;
+		reset-names = "phy";
 		rockchip,pipe-grf = <&pipegrf>;
 		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
 		#phy-cells = <1>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index fc67585b64b7..ad4331bc0780 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -428,16 +428,15 @@
 		#clock-cells = <0>;
 	};
 
-	pmu_sram: sram@10f000 {
-		compatible = "mmio-sram";
-		reg = <0x0 0x0010f000 0x0 0x100>;
-		ranges = <0 0x0 0x0010f000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		scmi_shmem: sram@0 {
+		scmi_shmem: shmem@10f000 {
 			compatible = "arm,scmi-shmem";
-			reg = <0x0 0x100>;
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
 		};
 	};
 
@@ -549,10 +548,10 @@
 	mmu600_pcie: iommu@fc900000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0xfc900000 0x0 0x200000>;
-		interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 369 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 374 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING 0>;
 		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
 		#iommu-cells = <1>;
 		status = "disabled";
@@ -561,10 +560,10 @@
 	mmu600_php: iommu@fcb00000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0xfcb00000 0x0 0x200000>;
-		interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 381 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 383 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 386 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 379 IRQ_TYPE_EDGE_RISING 0>;
 		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
 		#iommu-cells = <1>;
 		status = "disabled";
@@ -2626,9 +2625,9 @@
 		rockchip,hw-tshut-temp = <120000>;
 		rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
 		rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
-		pinctrl-0 = <&tsadc_gpio_func>;
-		pinctrl-1 = <&tsadc_shut>;
-		pinctrl-names = "gpio", "otpout";
+		pinctrl-0 = <&tsadc_shut_org>;
+		pinctrl-1 = <&tsadc_gpio_func>;
+		pinctrl-names = "default", "sleep";
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
index 6418286efe40..762d36ad733a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
@@ -101,7 +101,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd";
 		enable-active-high;
-		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcdpwr_en>;
 		vin-supply = <&vcc3v3_sys>;
@@ -207,7 +207,7 @@
 &pinctrl {
 	lcd {
 		lcdpwr_en: lcdpwr-en {
-			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		bl_en: bl-en {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
index e3a9598b99fc..cacffc851584 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
@@ -222,6 +222,10 @@
 		compatible = "realtek,rt5616";
 		reg = <0x1b>;
 		#sound-dai-cells = <0>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
index 31d2f8994f85..e61c5731fb99 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -455,7 +455,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
-	supports-cqe;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
index 615094bb8ba3..a82fe75bda55 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
@@ -367,7 +367,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
-	supports-cqe;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588j.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
index bce72bac4503..3045cb3bd68c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
@@ -11,20 +11,15 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-1416000000 {
-			opp-hz = /bits/ 64 <1416000000>;
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <750000 750000 950000>;
 			clock-latency-ns = <40000>;
 			opp-suspend;
 		};
-		opp-1608000000 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <887500 887500 950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp-1704000000 {
-			opp-hz = /bits/ 64 <1704000000>;
-			opp-microvolt = <937500 937500 950000>;
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <775000 775000 950000>;
 			clock-latency-ns = <40000>;
 		};
 	};
@@ -33,9 +28,14 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
+		opp-1200000000{
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+		};
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <750000 750000 950000>;
+			opp-microvolt = <762500 762500 950000>;
 			clock-latency-ns = <40000>;
 		};
 		opp-1608000000 {
@@ -43,25 +43,20 @@
 			opp-microvolt = <787500 787500 950000>;
 			clock-latency-ns = <40000>;
 		};
-		opp-1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <875000 875000 950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp-2016000000 {
-			opp-hz = /bits/ 64 <2016000000>;
-			opp-microvolt = <950000 950000 950000>;
-			clock-latency-ns = <40000>;
-		};
 	};
 
 	cluster2_opp_table: opp-table-cluster2 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
+		opp-1200000000{
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+		};
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <750000 750000 950000>;
+			opp-microvolt = <762500 762500 950000>;
 			clock-latency-ns = <40000>;
 		};
 		opp-1608000000 {
@@ -69,16 +64,6 @@
 			opp-microvolt = <787500 787500 950000>;
 			clock-latency-ns = <40000>;
 		};
-		opp-1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <875000 875000 950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp-2016000000 {
-			opp-hz = /bits/ 64 <2016000000>;
-			opp-microvolt = <950000 950000 950000>;
-			clock-latency-ns = <40000>;
-		};
 	};
 
 	gpu_opp_table: opp-table {
@@ -104,10 +89,6 @@
 			opp-hz = /bits/ 64 <700000000>;
 			opp-microvolt = <750000 750000 850000>;
 		};
-		opp-850000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <787500 787500 850000>;
-		};
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 8ba111d9283f..d9d2bf822443 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -62,7 +62,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "rockchip,es8388-codec";
+		label = "rockchip,es8388";
 		widgets = "Microphone", "Mic Jack",
 			  "Headphone", "Headphones";
 		routing = "LINPUT2", "Mic Jack",
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index feea6b20a6bf..6b77be643249 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -71,7 +71,6 @@
 
 	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
 		compatible = "regulator-fixed";
-		enable-active-low;
 		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
 		regulator-name = "vcc_3v3_sd_s0";
 		regulator-boot-on;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 1167cf63d7e8..cd9b92144a42 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -114,14 +114,13 @@
 	};
 
 	intc: interrupt-controller@4ac00000 {
-		compatible = "arm,cortex-a7-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x4ac10000 0x0 0x1000>,
-		      <0x0 0x4ac20000 0x0 0x2000>,
-		      <0x0 0x4ac40000 0x0 0x2000>,
-		      <0x0 0x4ac60000 0x0 0x2000>;
+		      <0x0 0x4ac20000 0x0 0x20000>,
+		      <0x0 0x4ac40000 0x0 0x20000>,
+		      <0x0 0x4ac60000 0x0 0x20000>;
 	};
 
 	psci {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/Makefile linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/Makefile
index bcd392c3206e..562e6d57bc99 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/Makefile
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/Makefile
@@ -41,10 +41,6 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
 
 # Boards with AM64x SoC
-k3-am642-hummingboard-t-pcie-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-pcie.dtbo
-k3-am642-hummingboard-t-usb3-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 5b92aef5b284..3f3a31eced97 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -23,7 +23,6 @@
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
 		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
-		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
 		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
 		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
 		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
@@ -553,8 +552,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 5bef31b8577b..f0eac05f7483 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -160,7 +160,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
 	};
 
 	reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 16a578ae2b41..45d68a0d1b59 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -18,7 +18,6 @@
 		compatible = "arm,gic-v3";
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
 		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
-		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
 		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
 		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
 		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
@@ -576,8 +575,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 9b6f51379108..77fe2b27cb58 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -564,8 +564,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 2>;
-		assigned-clock-parents = <&k3_clks 57 4>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
index e4633af87eb9..d6ce53c6d748 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
@@ -433,8 +433,6 @@
 			0 0 0 0
 			0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 76ca02127f95..dd090813a32d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -22,7 +22,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,7 +39,6 @@
 				reg = <0x10>;
 
 				clocks = <&clk_imx219_fixed>;
-				clock-names = "xclk";
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
index ccc7f5e43184..7fc7c95f5cd5 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -22,7 +22,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
index 4eaf9d757dd0..b6bfdfbbdd98 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -22,7 +22,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
similarity index 78%
rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso
rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
index bd9a5caf20da..023b2a6aaa56 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
@@ -2,17 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with PCI-E.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with PCI-E";
+};
+
 &pcie0_rc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_pins>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
similarity index 74%
rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso
rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
index ffcc3bd3c7bc..ee9bd618f370 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
@@ -2,16 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with USB-3.1 Gen 1.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1";
+};
+
 &serdes0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 1f1af7ea2330..0534b5348347 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,8 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
 		ti,itap-del-sel-ddr52 = <0x0>;
 		dma-coherent;
 		status = "disabled";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index d5ceab79536c..b40496097f82 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -44,6 +44,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: regulator-vsys3v3 {
 		/* Output of LM5141 */
 		compatible = "regulator-fixed";
@@ -76,7 +87,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
+		vin-supply = <&vsys_5v0>;
 		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 6593c5da82c0..df39f2b1ff6b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,7 +254,7 @@
 	};
 };
 
-&main_pmx1 {
+&main_pmx2 {
 	main_usbss0_pins_default: main-usbss0-default-pins {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 9386bf3ef9f6..1d11da926a87 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -426,10 +426,28 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	main_pmx1: pinctrl@11c11c {
+	main_pmx1: pinctrl@11c110 {
 		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x11c11c 0x00 0xc>;
+		reg = <0x00 0x11c110 0x00 0x004>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx2: pinctrl@11c11c {
+		compatible = "ti,j7200-padconf", "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c11c 0x00 0x00c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx3: pinctrl@11c164 {
+		compatible = "ti,j7200-padconf", "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c164 0x00 0x008>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -1145,7 +1163,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 266 1>;
+		clocks = <&k3_clks 266 4>;
 		status = "disabled";
 	};
 
@@ -1156,7 +1174,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 267 1>;
+		clocks = <&k3_clks 267 4>;
 		status = "disabled";
 	};
 
@@ -1167,7 +1185,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 268 1>;
+		clocks = <&k3_clks 268 4>;
 		status = "disabled";
 	};
 
@@ -1178,7 +1196,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 269 1>;
+		clocks = <&k3_clks 269 4>;
 		status = "disabled";
 	};
 
@@ -1189,7 +1207,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 270 1>;
+		clocks = <&k3_clks 270 2>;
 		status = "disabled";
 	};
 
@@ -1200,7 +1218,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 271 1>;
+		clocks = <&k3_clks 271 4>;
 		status = "disabled";
 	};
 
@@ -1211,7 +1229,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 272 1>;
+		clocks = <&k3_clks 272 4>;
 		status = "disabled";
 	};
 
@@ -1222,7 +1240,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 273 1>;
+		clocks = <&k3_clks 273 4>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5097d192c2b2..b18b2f2deb96 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -494,7 +494,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 274 0>;
+		clocks = <&k3_clks 274 4>;
 		status = "disabled";
 	};
 
@@ -505,7 +505,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 275 0>;
+		clocks = <&k3_clks 275 4>;
 		status = "disabled";
 	};
 
@@ -516,7 +516,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 276 0>;
+		clocks = <&k3_clks 276 2>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 8230d53cd696..f7a557e6af54 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -557,6 +557,7 @@
 &ospi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+	status = "okay";
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 3731ffb4a5c9..6f5c1401ebd6 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -654,7 +654,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 274 0>;
+		clocks = <&k3_clks 274 1>;
 		status = "disabled";
 	};
 
@@ -665,7 +665,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 275 0>;
+		clocks = <&k3_clks 275 1>;
 		status = "disabled";
 	};
 
@@ -676,7 +676,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 276 0>;
+		clocks = <&k3_clks 276 1>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
index 47bb5480b5b0..4eb3cffab032 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -19,6 +19,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
 };
 
 &csi_mux {
@@ -34,7 +61,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam0: endpoint {
@@ -56,7 +85,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam1: endpoint {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 6285e8d94dde..c8d7eb1814f0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -184,6 +184,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -211,6 +222,20 @@
 			 <3300000 0x1>;
 	};
 
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
@@ -608,6 +633,12 @@
 		>;
 	};
 
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 9ed6949b40e9..fae534b5c8a4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1708,7 +1708,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 339 1>;
+		clocks = <&k3_clks 339 2>;
 		status = "disabled";
 	};
 
@@ -1719,7 +1719,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 340 1>;
+		clocks = <&k3_clks 340 2>;
 		status = "disabled";
 	};
 
@@ -1730,7 +1730,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 341 1>;
+		clocks = <&k3_clks 341 2>;
 		status = "disabled";
 	};
 
@@ -1741,7 +1741,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 342 1>;
+		clocks = <&k3_clks 342 2>;
 		status = "disabled";
 	};
 
@@ -1752,7 +1752,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 343 1>;
+		clocks = <&k3_clks 343 2>;
 		status = "disabled";
 	};
 
@@ -1763,7 +1763,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 344 1>;
+		clocks = <&k3_clks 344 2>;
 		status = "disabled";
 	};
 
@@ -1774,7 +1774,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 345 1>;
+		clocks = <&k3_clks 345 2>;
 		status = "disabled";
 	};
 
@@ -1785,7 +1785,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 346 1>;
+		clocks = <&k3_clks 346 2>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 9d96b19d0e7c..8232d308c23c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -425,7 +425,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 347 0>;
+		clocks = <&k3_clks 347 2>;
 		status = "disabled";
 	};
 
@@ -436,7 +436,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 348 0>;
+		clocks = <&k3_clks 348 2>;
 		status = "disabled";
 	};
 
@@ -447,7 +447,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 349 0>;
+		clocks = <&k3_clks 349 2>;
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index a00f4a7d20d9..710f80a14b64 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -720,6 +720,10 @@
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
 };
 
+&serdes_wiz0 {
+	status = "okay";
+};
+
 &serdes0 {
 	status = "okay";
 	serdes0_usb_link: phy@0 {
@@ -731,6 +735,10 @@
 	};
 };
 
+&serdes_wiz1 {
+	status = "okay";
+};
+
 &serdes1 {
 	status = "okay";
 	serdes1_pcie_link: phy@0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index ed6f4ba08afc..ec8fcf9d16d6 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -32,6 +32,8 @@
 		assigned-clocks = <&k3_clks 279 1>;
 		assigned-clock-parents = <&k3_clks 279 5>;
 
+		status = "disabled";
+
 		serdes0: serdes@f000000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f000000 0x00010000>;
@@ -70,6 +72,8 @@
 		assigned-clocks = <&k3_clks 280 1>;
 		assigned-clock-parents = <&k3_clks 280 5>;
 
+		status = "disabled";
+
 		serdes1: serdes@f010000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f010000 0x00010000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-common.dtsi
new file mode 100644
index 000000000000..1dceff119a47
--- /dev/null
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-common.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for J784S4 and J742S2 SoC Family
+ *
+ * TRM (j784s4) (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52
+ * TRM (j742s2): https://www.ti.com/lit/pdf/spruje3
+ *
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x200000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x200000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
+			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIe0 Core*/
+			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe1 Core*/
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00800000>, /* PCIe2 Core*/
+			 <0x00 0x0e800000 0x00 0x0e800000 0x00 0x00800000>, /* PCIe3 Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x66800000 0x00 0x66800000 0x00 0x0070c000>, /* C71_3 */
+			 <0x00 0x67800000 0x00 0x67800000 0x00 0x0070c000>, /* C71_4 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x40 0x00000000 0x40 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x42 0x00000000 0x42 0x00000000 0x01 0x00000000>, /* PCIe2 DAT1 */
+			 <0x43 0x00000000 0x43 0x00000000 0x01 0x00000000>, /* PCIe3 DAT1 */
+			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT0 */
+			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT0 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			bootph-all;
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
+				 <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j784s4-j742s2-thermal-common.dtsi"
+	};
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j784s4-j742s2-main-common.dtsi"
+#include "k3-j784s4-j742s2-mcu-wakeup-common.dtsi"
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
new file mode 100644
index 000000000000..013c0d25d348
--- /dev/null
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -0,0 +1,2673 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for J784S4 and J742S2 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+#include "k3-serdes.h"
+
+/ {
+	serdes_refclk: clock-serdes {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* To be enabled when serdes_wiz* is functional */
+		status = "disabled";
+	};
+};
+
+&cbass_main {
+	/*
+	 * MSMC is configured by bootloaders and a runtime fixup is done in the
+	 * DT for this node
+	 */
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x00 0x20000>;
+		};
+
+		tifs-sram@1f0000 {
+			reg = <0x1f0000 0x10000>;
+		};
+
+		l3cache-sram@200000 {
+			reg = <0x200000 0x200000>;
+		};
+	};
+
+	scm_conf: bus@100000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		cpsw1_phy_gmii_sel: phy@4034 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4034 0x4>;
+			#phy-cells = <1>;
+		};
+
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j784s4-cpsw9g-phy-gmii-sel";
+			reg = <0x4044 0x20>;
+			#phy-cells = <1>;
+			ti,qsgmii-main-ports = <7>, <7>;
+		};
+
+		pcie0_ctrl: pcie0-ctrl@4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
+		pcie1_ctrl: pcie1-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "reg-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
+					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
+					<0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */
+					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
+					<0x28 0x3>, <0x2c 0x3>, /* SERDES2 lane2/3 select */
+					<0x40 0x3>, <0x44 0x3>, /* SERDES4 lane0/1 select */
+					<0x48 0x3>, <0x4c 0x3>; /* SERDES4 lane2/3 select */
+			idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
+				      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
+				      <J784S4_SERDES0_LANE2_IP3_UNUSED>,
+				      <J784S4_SERDES0_LANE3_USB>,
+				      <J784S4_SERDES1_LANE0_PCIE0_LANE0>,
+				      <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+				      <J784S4_SERDES1_LANE2_PCIE0_LANE2>,
+				      <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+				      <J784S4_SERDES2_LANE0_IP2_UNUSED>,
+				      <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+				      <J784S4_SERDES2_LANE2_QSGMII_LANE1>,
+				      <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
+				      <J784S4_SERDES4_LANE0_EDP_LANE0>,
+				      <J784S4_SERDES4_LANE1_EDP_LANE1>,
+				      <J784S4_SERDES4_LANE2_EDP_LANE2>,
+				      <J784S4_SERDES4_LANE3_EDP_LANE3>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "reg-mux";
+			reg = <0x4000 0x4>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 3 mux */
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+
+		audio_refclk1: clock@82e4 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e4 0x4>;
+			clocks = <&k3_clks 157 34>;
+			assigned-clocks = <&k3_clks 157 34>;
+			assigned-clock-parents = <&k3_clks 157 63>;
+			#clock-cells = <0>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3000000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 219 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3010000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 220 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3020000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 221 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3030000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 222 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3040000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 223 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3050000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 224 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 224 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
+		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <10>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c000 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x4e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+				<&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x4e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 97 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 97 2>;
+		assigned-clock-parents = <&k3_clks 97 3>;
+		power-domains = <&k3_pds 97 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 98 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 98 2>;
+		assigned-clock-parents = <&k3_clks 98 3>;
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 99 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 99 2>;
+		assigned-clock-parents = <&k3_clks 99 3>;
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 100 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 100 2>;
+		assigned-clock-parents = <&k3_clks 100 3>;
+		power-domains = <&k3_pds 100 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 101 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 101 2>;
+		assigned-clock-parents = <&k3_clks 101 3>;
+		power-domains = <&k3_pds 101 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 102 2>;
+		assigned-clock-parents = <&k3_clks 102 3>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 103 2>;
+		assigned-clock-parents = <&k3_clks 103 3>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 104 2>;
+		assigned-clock-parents = <&k3_clks 104 3>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 105 2>;
+		assigned-clock-parents = <&k3_clks 105 3>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 106 2>;
+		assigned-clock-parents = <&k3_clks 106 3>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 107 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 107 2>;
+		assigned-clock-parents = <&k3_clks 107 3>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 108 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 108 2>;
+		assigned-clock-parents = <&k3_clks 108 3>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 109 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 109 2>;
+		assigned-clock-parents = <&k3_clks 109 3>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 110 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 110 2>;
+		assigned-clock-parents = <&k3_clks 110 3>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 111 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 111 2>;
+		assigned-clock-parents = <&k3_clks 111 3>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 112 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 112 2>;
+		assigned-clock-parents = <&k3_clks 112 3>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 113 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 113 2>;
+		assigned-clock-parents = <&k3_clks 113 3>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 114 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 114 2>;
+		assigned-clock-parents = <&k3_clks 114 3>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 115 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 115 2>;
+		assigned-clock-parents = <&k3_clks 115 3>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 116 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 116 2>;
+		assigned-clock-parents = <&k3_clks 116 3>;
+		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x200>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x200>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 388 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x200>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 389 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x200>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 390 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x200>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 391 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x200>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 392 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x200>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 393 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x200>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 394 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x200>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 395 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x200>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 396 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>, <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>, <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>, <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>, <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	usbss0: usb@4104000 {
+		bootph-all;
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 398 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 398 21>, <&k3_clks 398 2>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 398 21>;    /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 398 22>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		status = "disabled"; /* Needs lane config */
+
+		usb0: usb@6000000 {
+			bootph-all;
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  /* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+		};
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 270 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 271 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 272 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 273 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 274 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 275 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 276 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ti_csi2rx0: ticsi2rx@4500000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04500000 0x00 0x00001000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4940 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@4504000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04504000 0x00 0x00001000>;
+			clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>,
+				<&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx1: ticsi2rx@4510000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04510000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4960 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx1: csi-bridge@4514000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04514000 0x00 0x00001000>;
+			clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>,
+				<&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy1>;
+			phy-names = "dphy";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi1_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi1_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi1_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi1_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi1_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx2: ticsi2rx@4520000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04520000 0x00 0x00001000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4980 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx2: csi-bridge@4524000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04524000 0x00 0x00001000>;
+			clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>,
+				<&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy2>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi2_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi2_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi2_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi2_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@4580000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x04580000 0x00 0x00001100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy1: phy@4590000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x04590000 0x00 0x00001100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy2: phy@45a0000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x045a0000 0x00 0x00001100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	vpu0: video-codec@4210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 241 2>;
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	vpu1: video-codec@4220000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4220000 0x00 0x10000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 242 2>;
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x1000>,
+		      <0x00 0x04f88000 0x00 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 140 1>, <&k3_clks 140 2>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 140 2>;
+		assigned-clock-parents = <&k3_clks 140 3>;
+		bus-width = <8>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x1000>,
+		      <0x00 0x04fb8000 0x00 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 3>, <&k3_clks 141 4>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 141 4>;
+		assigned-clock-parents = <&k3_clks 141 5>;
+		bus-width = <4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	pcie0_rc: pcie@2900000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 332 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 333 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 404 6>;
+		assigned-clock-parents = <&k3_clks 404 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x5060000 0x00 0x5060000 0x10000>;
+		status = "disabled";
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 404 6>,
+						 <&k3_clks 404 6>,
+						 <&k3_clks 404 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
+	serdes_wiz1: wiz@5070000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 405 6>;
+		assigned-clock-parents = <&k3_clks 405 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05070000 0x00 0x05070000 0x10000>;
+		status = "disabled";
+
+		serdes1: serdes@5070000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05070000 0x010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz1 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 405 6>,
+						 <&k3_clks 405 6>,
+						 <&k3_clks 405 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
+	serdes_wiz4: wiz@5050000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 407 6>;
+		assigned-clock-parents = <&k3_clks 407 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05050000 0x00 0x05050000 0x10000>,
+			 <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */
+		status = "disabled";
+
+		serdes4: serdes@5050000 {
+			/*
+			 * Note: we also map DPTX PHY registers as the Torrent
+			 * needs to manage those.
+			 */
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05050000 0x010000>,
+			      <0x0a030a00 0x40>; /* DPTX PHY */
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz4 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 407 6>,
+						 <&k3_clks 407 6>,
+						 <&k3_clks 407 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
+	main_navss: bus@30000000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <280>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <283>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <321>;
+			ti,interrupt-ranges = <0 0 256>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			bootph-all;
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: hwlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster0: mailbox@31f90000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f90000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster1: mailbox@31f91000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f91000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster2: mailbox@31f92000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f92000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster3: mailbox@31f93000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f93000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster4: mailbox@31f94000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f94000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster5: mailbox@31f95000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f95000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster6: mailbox@31f96000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f96000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster7: mailbox@31f97000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f97000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster8: mailbox@31f98000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f98000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster9: mailbox@31f99000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f99000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster10: mailbox@31f9a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster11: mailbox@31f9b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x3c000000 0x00 0x400000>,
+			      <0x00 0x38000000 0x00 0x400000>,
+			      <0x00 0x31120000 0x00 0x100>,
+			      <0x00 0x33000000 0x00 0x40000>,
+			      <0x00 0x31080000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <315>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x00 0x31150000 0x00 0x100>,
+			      <0x00 0x34000000 0x00 0x80000>,
+			      <0x00 0x35000000 0x00 0x200000>,
+			      <0x00 0x30b00000 0x00 0x20000>,
+			      <0x00 0x30c00000 0x00 0x8000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <319>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		main_bcdma_csi: dma-controller@311a0000 {
+			compatible = "ti,j721s2-dmss-bcdma-csi";
+			reg = <0x00 0x311a0000 0x00 0x100>,
+			      <0x00 0x35d00000 0x00 0x20000>,
+			      <0x00 0x35c00000 0x00 0x10000>,
+			      <0x00 0x35e00000 0x00 0x80000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <3>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <281>;
+			ti,sci-rm-range-rchan = <0x21>;
+			ti,sci-rm-range-tchan = <0x22>;
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 282 0>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 62 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_cpsw0: ethernet@c000000 {
+		compatible = "ti,j784s4-cpswxg-nuss";
+		reg = <0x00 0xc000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+		clocks = <&k3_clks 64 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw0_port1: port@1 {
+				reg = <1>;
+				label = "port1";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port2: port@2 {
+				reg = <2>;
+				label = "port2";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port3: port@3 {
+				reg = <3>;
+				label = "port3";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port4: port@4 {
+				reg = <4>;
+				label = "port4";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port5: port@5 {
+				reg = <5>;
+				label = "port5";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port6: port@6 {
+				reg = <6>;
+				label = "port6";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port7: port@7 {
+				reg = <7>;
+				label = "port7";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port8: port@8 {
+				reg = <8>;
+				label = "port8";
+				ti,mac-only;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw0_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 64 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 64 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_cpsw1: ethernet@c200000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		reg = <0x00 0xc200000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+		clocks = <&k3_clks 62 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xc640>,
+			<&main_udmap 0xc641>,
+			<&main_udmap 0xc642>,
+			<&main_udmap 0xc643>,
+			<&main_udmap 0xc644>,
+			<&main_udmap 0xc645>,
+			<&main_udmap 0xc646>,
+			<&main_udmap 0xc647>,
+			<&main_udmap 0x4640>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+				"tx4", "tx5", "tx6", "tx7",
+				"rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw1_port1: port@1 {
+				reg = <1>;
+				label = "port1";
+				phys = <&cpsw1_phy_gmii_sel 1>;
+				ti,mac-only;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw1_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 62 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 245 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 245 6>, <&k3_clks 245 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 246 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 246 6>, <&k3_clks 246 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 247 6>, <&k3_clks 247 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 248 6>, <&k3_clks 248 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 249 6>, <&k3_clks 249 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 250 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 250 6>, <&k3_clks 250 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 251 6>, <&k3_clks 251 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 252 6>, <&k3_clks 252 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 253 6>, <&k3_clks 253 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 254 6>, <&k3_clks 254 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 255 6>, <&k3_clks 255 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 256 6>, <&k3_clks 256 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 257 6>, <&k3_clks 257 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 258 6>, <&k3_clks 258 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 259 6>, <&k3_clks 259 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 260 6>, <&k3_clks 260 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 261 6>, <&k3_clks 261 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 262 6>, <&k3_clks 262 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 376 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 377 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 378 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 379 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 380 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 381 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 382 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 383 1>;
+		status = "disabled";
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x00 0x4e80000 0x00 0x100>;
+		power-domains = <&k3_pds 387 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 387 3>;
+		assigned-clocks = <&k3_clks 387 3>;
+		assigned-clock-parents = <&k3_clks 387 6>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x00 0x4e84000 0x00 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>,
+					<19200000 19200000>;
+			clocks = <&k3_clks 387 1>, <&k3_clks 387 3>, <&k3_clks 387 3>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <339>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 339 1>;
+			firmware-name = "j784s4-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5d00000 0x00010000>,
+			      <0x5d10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <340>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 340 1>;
+			firmware-name = "j784s4-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5e00000 0x00010000>,
+			      <0x5e10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <341>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 341 1>;
+			firmware-name = "j784s4-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5f00000 0x00010000>,
+			      <0x5f10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <342>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 342 1>;
+			firmware-name = "j784s4-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss2: r5fss@5900000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5900000 0x00 0x5900000 0x20000>,
+			 <0x5a00000 0x00 0x5a00000 0x20000>;
+		power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss2_core0: r5f@5900000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5900000 0x00010000>,
+			      <0x5910000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <343>;
+			ti,sci-proc-ids = <0x0a 0xff>;
+			resets = <&k3_reset 343 1>;
+			firmware-name = "j784s4-main-r5f2_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss2_core1: r5f@5a00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5a00000 0x00010000>,
+			      <0x5a10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <344>;
+			ti,sci-proc-ids = <0x0b 0xff>;
+			resets = <&k3_reset 344 1>;
+			firmware-name = "j784s4-main-r5f2_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <30>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 30 1>;
+		firmware-name = "j784s4-c71_0-fw";
+		status = "disabled";
+	};
+
+	c71_1: dsp@65800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x65800000 0x00 0x00080000>,
+		      <0x00 0x65e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <33>;
+		ti,sci-proc-ids = <0x31 0xff>;
+		resets = <&k3_reset 33 1>;
+		firmware-name = "j784s4-c71_1-fw";
+		status = "disabled";
+	};
+
+	c71_2: dsp@66800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x66800000 0x00 0x00080000>,
+		      <0x00 0x66e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <37>;
+		ti,sci-proc-ids = <0x32 0xff>;
+		resets = <&k3_reset 37 1>;
+		firmware-name = "j784s4-c71_2-fw";
+		status = "disabled";
+	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x700000 0x00 0x1000>;
+		ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>,
+			      <695>;
+		bootph-pre-ram;
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2200000 0x00 0x100>;
+		clocks = <&k3_clks 348 0>;
+		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 348 0>;
+		assigned-clock-parents = <&k3_clks 348 4>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2210000 0x00 0x100>;
+		clocks = <&k3_clks 349 0>;
+		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 349 0>;
+		assigned-clock-parents = <&k3_clks 349 4>;
+	};
+
+	watchdog2: watchdog@2220000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2220000 0x00 0x100>;
+		clocks = <&k3_clks 350 0>;
+		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 350 0>;
+		assigned-clock-parents = <&k3_clks 350 4>;
+	};
+
+	watchdog3: watchdog@2230000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2230000 0x00 0x100>;
+		clocks = <&k3_clks 351 0>;
+		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 351 0>;
+		assigned-clock-parents = <&k3_clks 351 4>;
+	};
+
+	watchdog4: watchdog@2240000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2240000 0x00 0x100>;
+		clocks = <&k3_clks 352 0>;
+		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 352 0>;
+		assigned-clock-parents = <&k3_clks 352 4>;
+	};
+
+	watchdog5: watchdog@2250000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2250000 0x00 0x100>;
+		clocks = <&k3_clks 353 0>;
+		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 353 0>;
+		assigned-clock-parents = <&k3_clks 353 4>;
+	};
+
+	watchdog6: watchdog@2260000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2260000 0x00 0x100>;
+		clocks = <&k3_clks 354 0>;
+		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 354 0>;
+		assigned-clock-parents = <&k3_clks 354 4>;
+	};
+
+	watchdog7: watchdog@2270000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2270000 0x00 0x100>;
+		clocks = <&k3_clks 355 0>;
+		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 355 0>;
+		assigned-clock-parents = <&k3_clks 355 4>;
+	};
+
+	/*
+	 * The following RTI instances are coupled with MCU R5Fs, c7x and
+	 * GPU so keeping them reserved as these will be used by their
+	 * respective firmware
+	 */
+	watchdog8: watchdog@22f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x22f0000 0x00 0x100>;
+		clocks = <&k3_clks 360 0>;
+		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 360 0>;
+		assigned-clock-parents = <&k3_clks 360 4>;
+		/* reserved for GPU */
+		status = "reserved";
+	};
+
+	watchdog9: watchdog@2300000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2300000 0x00 0x100>;
+		clocks = <&k3_clks 356 0>;
+		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 356 0>;
+		assigned-clock-parents = <&k3_clks 356 4>;
+		/* reserved for C7X_0 DSP */
+		status = "reserved";
+	};
+
+	watchdog10: watchdog@2310000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2310000 0x00 0x100>;
+		clocks = <&k3_clks 357 0>;
+		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 357 0>;
+		assigned-clock-parents = <&k3_clks 357 4>;
+		/* reserved for C7X_1 DSP */
+		status = "reserved";
+	};
+
+	watchdog11: watchdog@2320000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2320000 0x00 0x100>;
+		clocks = <&k3_clks 358 0>;
+		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 358 0>;
+		assigned-clock-parents = <&k3_clks 358 4>;
+		/* reserved for C7X_2 DSP */
+		status = "reserved";
+	};
+
+	watchdog12: watchdog@2330000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2330000 0x00 0x100>;
+		clocks = <&k3_clks 359 0>;
+		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 359 0>;
+		assigned-clock-parents = <&k3_clks 359 4>;
+		/* reserved for C7X_3 DSP */
+		status = "reserved";
+	};
+
+	watchdog13: watchdog@23c0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23c0000 0x00 0x100>;
+		clocks = <&k3_clks 361 0>;
+		power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 361 0>;
+		assigned-clock-parents = <&k3_clks 361 4>;
+		/* reserved for MAIN_R5F0_0 */
+		status = "reserved";
+	};
+
+	watchdog14: watchdog@23d0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23d0000 0x00 0x100>;
+		clocks = <&k3_clks 362 0>;
+		power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 362 0>;
+		assigned-clock-parents = <&k3_clks 362 4>;
+		/* reserved for MAIN_R5F0_1 */
+		status = "reserved";
+	};
+
+	watchdog15: watchdog@23e0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23e0000 0x00 0x100>;
+		clocks = <&k3_clks 363 0>;
+		power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 363 0>;
+		assigned-clock-parents = <&k3_clks 363 4>;
+		/* reserved for MAIN_R5F1_0 */
+		status = "reserved";
+	};
+
+	watchdog16: watchdog@23f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23f0000 0x00 0x100>;
+		clocks = <&k3_clks 364 0>;
+		power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 364 0>;
+		assigned-clock-parents = <&k3_clks 364 4>;
+		/* reserved for MAIN_R5F1_1 */
+		status = "reserved";
+	};
+
+	watchdog17: watchdog@2540000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2540000 0x00 0x100>;
+		clocks = <&k3_clks 365 0>;
+		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 365 0>;
+		assigned-clock-parents = <&k3_clks 366 4>;
+		/* reserved for MAIN_R5F2_0 */
+		status = "reserved";
+	};
+
+	watchdog18: watchdog@2550000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2550000 0x00 0x100>;
+		clocks = <&k3_clks 366 0>;
+		power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 366 0>;
+		assigned-clock-parents = <&k3_clks 366 4>;
+		/* reserved for MAIN_R5F2_1 */
+		status = "reserved";
+	};
+
+	mhdp: bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+		reg = <0x0 0xa000000 0x0 0x30a00>,
+		      <0x0 0x4f40000 0x0 0x20>;
+		reg-names = "mhdptx", "j721e-intg";
+		clocks = <&k3_clks 217 11>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Remote-endpoints are on the boards so
+			 * ports are defined in the platform dt file.
+			 */
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
+		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
+		reg-names = "common_m", "common_s0",
+			    "common_s1", "common_s2",
+			    "vidl1", "vidl2","vid1","vid2",
+			    "ovr1", "ovr2", "ovr3", "ovr4",
+			    "vp1", "vp2", "vp3", "vp4",
+			    "wb";
+		clocks = <&k3_clks 218 0>,
+			 <&k3_clks 218 2>,
+			 <&k3_clks 218 5>,
+			 <&k3_clks 218 14>,
+			 <&k3_clks 218 18>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+		status = "disabled";
+
+		dss_ports: ports {
+			/* Ports that DSS drives are platform specific
+			 * so they are defined in platform dt file.
+			 */
+		};
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 265 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 265 0>;
+		assigned-clock-parents = <&k3_clks 265 1>;
+		power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 266 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 266 0>;
+		assigned-clock-parents = <&k3_clks 266 1>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 267 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 267 0>;
+		assigned-clock-parents = <&k3_clks 267 1>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b30000 0x00 0x2000>,
+		      <0x00 0x02b38000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 268 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 268 0>;
+		assigned-clock-parents = <&k3_clks 268 1>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b40000 0x00 0x2000>,
+		      <0x00 0x02b48000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 269 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 269 0>;
+		assigned-clock-parents = <&k3_clks 269 1>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
similarity index 99%
rename from arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
rename to arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
index f603380fc91c..cba8d0e64f2e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
+ * Device Tree Source for J784S4 and J742S2 SoC Family MCU/WAKEUP Domain peripherals
  *
  * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-thermal-common.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi
rename to arch/arm64/boot/dts/ti/k3-j784s4-j742s2-thermal-common.dtsi
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index e73bb750b09a..0160fe0da983 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -5,2781 +5,124 @@
  * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
-#include <dt-bindings/mux/mux.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/phy/phy-ti.h>
-
-#include "k3-serdes.h"
-
-/ {
-	serdes_refclk: clock-serdes {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		/* To be enabled when serdes_wiz* is functional */
-		status = "disabled";
-	};
-};
-
-&cbass_main {
-	msmc_ram: sram@70000000 {
-		compatible = "mmio-sram";
-		reg = <0x00 0x70000000 0x00 0x800000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0x70000000 0x800000>;
-
-		atf-sram@0 {
-			reg = <0x00 0x20000>;
-		};
-
-		tifs-sram@1f0000 {
-			reg = <0x1f0000 0x10000>;
-		};
-
-		l3cache-sram@200000 {
-			reg = <0x200000 0x200000>;
-		};
-	};
-
-	scm_conf: bus@100000 {
-		compatible = "simple-bus";
-		reg = <0x00 0x00100000 0x00 0x1c000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0x00100000 0x1c000>;
-
-		cpsw1_phy_gmii_sel: phy@4034 {
-			compatible = "ti,am654-phy-gmii-sel";
-			reg = <0x4034 0x4>;
-			#phy-cells = <1>;
-		};
-
-		cpsw0_phy_gmii_sel: phy@4044 {
-			compatible = "ti,j784s4-cpsw9g-phy-gmii-sel";
-			reg = <0x4044 0x20>;
-			#phy-cells = <1>;
-			ti,qsgmii-main-ports = <7>, <7>;
-		};
-
-		pcie0_ctrl: pcie0-ctrl@4070 {
-			compatible = "ti,j784s4-pcie-ctrl", "syscon";
-			reg = <0x4070 0x4>;
-		};
-
-		pcie1_ctrl: pcie1-ctrl@4074 {
-			compatible = "ti,j784s4-pcie-ctrl", "syscon";
-			reg = <0x4074 0x4>;
-		};
-
-		pcie2_ctrl: pcie2-ctrl@4078 {
-			compatible = "ti,j784s4-pcie-ctrl", "syscon";
-			reg = <0x4078 0x4>;
-		};
-
-		pcie3_ctrl: pcie3-ctrl@407c {
-			compatible = "ti,j784s4-pcie-ctrl", "syscon";
-			reg = <0x407c 0x4>;
-		};
-
-		serdes_ln_ctrl: mux-controller@4080 {
-			compatible = "reg-mux";
-			reg = <0x00004080 0x30>;
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
-					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
-					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
-					<0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */
-					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
-					<0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */
-			idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
-				      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
-				      <J784S4_SERDES0_LANE2_IP3_UNUSED>,
-				      <J784S4_SERDES0_LANE3_USB>,
-				      <J784S4_SERDES1_LANE0_PCIE0_LANE0>,
-				      <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
-				      <J784S4_SERDES1_LANE2_PCIE0_LANE2>,
-				      <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
-				      <J784S4_SERDES2_LANE0_IP2_UNUSED>,
-				      <J784S4_SERDES2_LANE1_IP2_UNUSED>,
-				      <J784S4_SERDES2_LANE2_QSGMII_LANE1>,
-				      <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
-				      <J784S4_SERDES4_LANE0_EDP_LANE0>,
-				      <J784S4_SERDES4_LANE1_EDP_LANE1>,
-				      <J784S4_SERDES4_LANE2_EDP_LANE2>,
-				      <J784S4_SERDES4_LANE3_EDP_LANE3>;
-		};
-
-		usb_serdes_mux: mux-controller@4000 {
-			compatible = "reg-mux";
-			reg = <0x4000 0x4>;
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 3 mux */
-		};
-
-		ehrpwm_tbclk: clock-controller@4140 {
-			compatible = "ti,am654-ehrpwm-tbclk";
-			reg = <0x4140 0x18>;
-			#clock-cells = <1>;
-		};
-
-		audio_refclk1: clock@82e4 {
-			compatible = "ti,am62-audio-refclk";
-			reg = <0x82e4 0x4>;
-			clocks = <&k3_clks 157 34>;
-			assigned-clocks = <&k3_clks 157 34>;
-			assigned-clock-parents = <&k3_clks 157 63>;
-			#clock-cells = <0>;
-		};
-	};
-
-	main_ehrpwm0: pwm@3000000 {
-		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
-		reg = <0x00 0x3000000 0x00 0x100>;
-		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 219 0>;
-		clock-names = "tbclk", "fck";
-		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	main_ehrpwm1: pwm@3010000 {
-		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
-		reg = <0x00 0x3010000 0x00 0x100>;
-		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 220 0>;
-		clock-names = "tbclk", "fck";
-		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	main_ehrpwm2: pwm@3020000 {
-		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
-		reg = <0x00 0x3020000 0x00 0x100>;
-		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 221 0>;
-		clock-names = "tbclk", "fck";
-		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	main_ehrpwm3: pwm@3030000 {
-		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
-		reg = <0x00 0x3030000 0x00 0x100>;
-		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 222 0>;
-		clock-names = "tbclk", "fck";
-		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	main_ehrpwm4: pwm@3040000 {
-		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
-		reg = <0x00 0x3040000 0x00 0x100>;
-		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 223 0>;
-		clock-names = "tbclk", "fck";
-		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	main_ehrpwm5: pwm@3050000 {
-		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
-		reg = <0x00 0x3050000 0x00 0x100>;
-		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 224 0>;
-		clock-names = "tbclk", "fck";
-		power-domains = <&k3_pds 224 TI_SCI_PD_EXCLUSIVE>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	gic500: interrupt-controller@1800000 {
-		compatible = "arm,gic-v3";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
-		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
-		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
-		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
-		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
-
-		/* vcpumntirq: virtual CPU interface maintenance interrupt */
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
-		gic_its: msi-controller@1820000 {
-			compatible = "arm,gic-v3-its";
-			reg = <0x00 0x01820000 0x00 0x10000>;
-			socionext,synquacer-pre-its = <0x1000000 0x400000>;
-			msi-controller;
-			#msi-cells = <1>;
-		};
-	};
-
-	main_gpio_intr: interrupt-controller@a00000 {
-		compatible = "ti,sci-intr";
-		reg = <0x00 0x00a00000 0x00 0x800>;
-		ti,intr-trigger-type = <1>;
-		interrupt-controller;
-		interrupt-parent = <&gic500>;
-		#interrupt-cells = <1>;
-		ti,sci = <&sms>;
-		ti,sci-dev-id = <10>;
-		ti,interrupt-ranges = <8 392 56>;
-	};
-
-	main_pmx0: pinctrl@11c000 {
-		compatible = "pinctrl-single";
-		/* Proxy 0 addressing */
-		reg = <0x00 0x11c000 0x00 0x120>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
-	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
-	main_timerio_input: pinctrl@104200 {
-		compatible = "pinctrl-single";
-		reg = <0x00 0x104200 0x00 0x50>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x00000007>;
-	};
-
-	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
-	main_timerio_output: pinctrl@104280 {
-		compatible = "pinctrl-single";
-		reg = <0x00 0x104280 0x00 0x20>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x0000001f>;
-	};
-
-	main_crypto: crypto@4e00000 {
-		compatible = "ti,j721e-sa2ul";
-		reg = <0x00 0x4e00000 0x00 0x1200>;
-		power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
-
-		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
-				<&main_udmap 0x4a41>;
-		dma-names = "tx", "rx1", "rx2";
-
-		rng: rng@4e10000 {
-			compatible = "inside-secure,safexcel-eip76";
-			reg = <0x00 0x4e10000 0x00 0x7d>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	main_timer0: timer@2400000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2400000 0x00 0x400>;
-		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 97 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 97 2>;
-		assigned-clock-parents = <&k3_clks 97 3>;
-		power-domains = <&k3_pds 97 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer1: timer@2410000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2410000 0x00 0x400>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 98 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 98 2>;
-		assigned-clock-parents = <&k3_clks 98 3>;
-		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer2: timer@2420000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2420000 0x00 0x400>;
-		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 99 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 99 2>;
-		assigned-clock-parents = <&k3_clks 99 3>;
-		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer3: timer@2430000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2430000 0x00 0x400>;
-		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 100 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 100 2>;
-		assigned-clock-parents = <&k3_clks 100 3>;
-		power-domains = <&k3_pds 100 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer4: timer@2440000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2440000 0x00 0x400>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 101 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 101 2>;
-		assigned-clock-parents = <&k3_clks 101 3>;
-		power-domains = <&k3_pds 101 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer5: timer@2450000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2450000 0x00 0x400>;
-		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 102 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 102 2>;
-		assigned-clock-parents = <&k3_clks 102 3>;
-		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer6: timer@2460000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2460000 0x00 0x400>;
-		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 103 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 103 2>;
-		assigned-clock-parents = <&k3_clks 103 3>;
-		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer7: timer@2470000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2470000 0x00 0x400>;
-		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 104 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 104 2>;
-		assigned-clock-parents = <&k3_clks 104 3>;
-		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer8: timer@2480000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2480000 0x00 0x400>;
-		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 105 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 105 2>;
-		assigned-clock-parents = <&k3_clks 105 3>;
-		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer9: timer@2490000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2490000 0x00 0x400>;
-		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 106 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 106 2>;
-		assigned-clock-parents = <&k3_clks 106 3>;
-		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer10: timer@24a0000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x24a0000 0x00 0x400>;
-		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 107 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 107 2>;
-		assigned-clock-parents = <&k3_clks 107 3>;
-		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer11: timer@24b0000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x24b0000 0x00 0x400>;
-		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 108 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 108 2>;
-		assigned-clock-parents = <&k3_clks 108 3>;
-		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer12: timer@24c0000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x24c0000 0x00 0x400>;
-		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 109 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 109 2>;
-		assigned-clock-parents = <&k3_clks 109 3>;
-		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer13: timer@24d0000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x24d0000 0x00 0x400>;
-		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 110 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 110 2>;
-		assigned-clock-parents = <&k3_clks 110 3>;
-		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer14: timer@24e0000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x24e0000 0x00 0x400>;
-		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 111 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 111 2>;
-		assigned-clock-parents = <&k3_clks 111 3>;
-		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer15: timer@24f0000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x24f0000 0x00 0x400>;
-		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 112 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 112 2>;
-		assigned-clock-parents = <&k3_clks 112 3>;
-		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer16: timer@2500000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2500000 0x00 0x400>;
-		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 113 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 113 2>;
-		assigned-clock-parents = <&k3_clks 113 3>;
-		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer17: timer@2510000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2510000 0x00 0x400>;
-		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 114 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 114 2>;
-		assigned-clock-parents = <&k3_clks 114 3>;
-		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer18: timer@2520000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2520000 0x00 0x400>;
-		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 115 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 115 2>;
-		assigned-clock-parents = <&k3_clks 115 3>;
-		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer19: timer@2530000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2530000 0x00 0x400>;
-		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 116 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 116 2>;
-		assigned-clock-parents = <&k3_clks 116 3>;
-		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_uart0: serial@2800000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02800000 0x00 0x200>;
-		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 146 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart1: serial@2810000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02810000 0x00 0x200>;
-		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 388 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart2: serial@2820000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02820000 0x00 0x200>;
-		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 389 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart3: serial@2830000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02830000 0x00 0x200>;
-		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 390 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart4: serial@2840000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02840000 0x00 0x200>;
-		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 391 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart5: serial@2850000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02850000 0x00 0x200>;
-		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 392 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart6: serial@2860000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02860000 0x00 0x200>;
-		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 393 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart7: serial@2870000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02870000 0x00 0x200>;
-		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 394 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart8: serial@2880000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02880000 0x00 0x200>;
-		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 395 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_uart9: serial@2890000 {
-		compatible = "ti,j721e-uart", "ti,am654-uart";
-		reg = <0x00 0x02890000 0x00 0x200>;
-		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 396 0>;
-		clock-names = "fclk";
-		power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_gpio0: gpio@600000 {
-		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
-		reg = <0x00 0x00600000 0x00 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <145>, <146>, <147>, <148>, <149>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <66>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 163 0>;
-		clock-names = "gpio";
-		status = "disabled";
-	};
-
-	main_gpio2: gpio@610000 {
-		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
-		reg = <0x00 0x00610000 0x00 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <154>, <155>, <156>, <157>, <158>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <66>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 164 0>;
-		clock-names = "gpio";
-		status = "disabled";
-	};
-
-	main_gpio4: gpio@620000 {
-		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
-		reg = <0x00 0x00620000 0x00 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <163>, <164>, <165>, <166>, <167>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <66>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 165 0>;
-		clock-names = "gpio";
-		status = "disabled";
-	};
-
-	main_gpio6: gpio@630000 {
-		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
-		reg = <0x00 0x00630000 0x00 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <172>, <173>, <174>, <175>, <176>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <66>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 166 0>;
-		clock-names = "gpio";
-		status = "disabled";
-	};
-
-	usbss0: usb@4104000 {
-		bootph-all;
-		compatible = "ti,j721e-usb";
-		reg = <0x00 0x4104000 0x00 0x100>;
-		dma-coherent;
-		power-domains = <&k3_pds 398 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 398 21>, <&k3_clks 398 2>;
-		clock-names = "ref", "lpm";
-		assigned-clocks = <&k3_clks 398 21>;    /* USB2_REFCLK */
-		assigned-clock-parents = <&k3_clks 398 22>; /* HFOSC0 */
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		status = "disabled"; /* Needs lane config */
-
-		usb0: usb@6000000 {
-			bootph-all;
-			compatible = "cdns,usb3";
-			reg = <0x00 0x6000000 0x00 0x10000>,
-			      <0x00 0x6010000 0x00 0x10000>,
-			      <0x00 0x6020000 0x00 0x10000>;
-			reg-names = "otg", "xhci", "dev";
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  /* irq.0 */
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
-				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
-			interrupt-names = "host",
-					  "peripheral",
-					  "otg";
-		};
-	};
-
-	main_i2c0: i2c@2000000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02000000 0x00 0x100>;
-		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 270 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_i2c1: i2c@2010000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02010000 0x00 0x100>;
-		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 271 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_i2c2: i2c@2020000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02020000 0x00 0x100>;
-		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 272 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_i2c3: i2c@2030000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02030000 0x00 0x100>;
-		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 273 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_i2c4: i2c@2040000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02040000 0x00 0x100>;
-		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 274 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_i2c5: i2c@2050000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02050000 0x00 0x100>;
-		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 275 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	main_i2c6: i2c@2060000 {
-		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02060000 0x00 0x100>;
-		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&k3_clks 276 2>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	ti_csi2rx0: ticsi2rx@4500000 {
-		compatible = "ti,j721e-csi2rx-shim";
-		reg = <0x00 0x04500000 0x00 0x00001000>;
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dmas = <&main_bcdma_csi 0 0x4940 0>;
-		dma-names = "rx0";
-		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-
-		cdns_csi2rx0: csi-bridge@4504000 {
-			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
-			reg = <0x00 0x04504000 0x00 0x00001000>;
-			clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>,
-				<&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>;
-			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
-				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
-			phys = <&dphy0>;
-			phy-names = "dphy";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi0_port0: port@0 {
-					reg = <0>;
-					status = "disabled";
-				};
-
-				csi0_port1: port@1 {
-					reg = <1>;
-					status = "disabled";
-				};
-
-				csi0_port2: port@2 {
-					reg = <2>;
-					status = "disabled";
-				};
-
-				csi0_port3: port@3 {
-					reg = <3>;
-					status = "disabled";
-				};
-
-				csi0_port4: port@4 {
-					reg = <4>;
-					status = "disabled";
-				};
-			};
-		};
-	};
-
-	ti_csi2rx1: ticsi2rx@4510000 {
-		compatible = "ti,j721e-csi2rx-shim";
-		reg = <0x00 0x04510000 0x00 0x1000>;
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dmas = <&main_bcdma_csi 0 0x4960 0>;
-		dma-names = "rx0";
-		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-
-		cdns_csi2rx1: csi-bridge@4514000 {
-			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
-			reg = <0x00 0x04514000 0x00 0x00001000>;
-			clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>,
-				<&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>;
-			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
-				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
-			phys = <&dphy1>;
-			phy-names = "dphy";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi1_port0: port@0 {
-					reg = <0>;
-					status = "disabled";
-				};
-
-				csi1_port1: port@1 {
-					reg = <1>;
-					status = "disabled";
-				};
-
-				csi1_port2: port@2 {
-					reg = <2>;
-					status = "disabled";
-				};
-
-				csi1_port3: port@3 {
-					reg = <3>;
-					status = "disabled";
-				};
-
-				csi1_port4: port@4 {
-					reg = <4>;
-					status = "disabled";
-				};
-			};
-		};
-	};
-
-	ti_csi2rx2: ticsi2rx@4520000 {
-		compatible = "ti,j721e-csi2rx-shim";
-		reg = <0x00 0x04520000 0x00 0x00001000>;
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dmas = <&main_bcdma_csi 0 0x4980 0>;
-		dma-names = "rx0";
-		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-
-		cdns_csi2rx2: csi-bridge@4524000 {
-			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
-			reg = <0x00 0x04524000 0x00 0x00001000>;
-			clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>,
-				<&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>;
-			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
-				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
-			phys = <&dphy2>;
-			phy-names = "dphy";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi2_port0: port@0 {
-					reg = <0>;
-					status = "disabled";
-				};
-
-				csi2_port1: port@1 {
-					reg = <1>;
-					status = "disabled";
-				};
-
-				csi2_port2: port@2 {
-					reg = <2>;
-					status = "disabled";
-				};
-
-				csi2_port3: port@3 {
-					reg = <3>;
-					status = "disabled";
-				};
-
-				csi2_port4: port@4 {
-					reg = <4>;
-					status = "disabled";
-				};
-			};
-		};
-	};
-
-	dphy0: phy@4580000 {
-		compatible = "cdns,dphy-rx";
-		reg = <0x00 0x04580000 0x00 0x00001100>;
-		#phy-cells = <0>;
-		power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	dphy1: phy@4590000 {
-		compatible = "cdns,dphy-rx";
-		reg = <0x00 0x04590000 0x00 0x00001100>;
-		#phy-cells = <0>;
-		power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	dphy2: phy@45a0000 {
-		compatible = "cdns,dphy-rx";
-		reg = <0x00 0x045a0000 0x00 0x00001100>;
-		#phy-cells = <0>;
-		power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	vpu0: video-codec@4210000 {
-		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
-		reg = <0x00 0x4210000 0x00 0x10000>;
-		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 241 2>;
-		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
-	};
-
-	vpu1: video-codec@4220000 {
-		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
-		reg = <0x00 0x4220000 0x00 0x10000>;
-		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 242 2>;
-		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
-	};
-
-	main_sdhci0: mmc@4f80000 {
-		compatible = "ti,j721e-sdhci-8bit";
-		reg = <0x00 0x04f80000 0x00 0x1000>,
-		      <0x00 0x04f88000 0x00 0x400>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 140 1>, <&k3_clks 140 2>;
-		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 140 2>;
-		assigned-clock-parents = <&k3_clks 140 3>;
-		bus-width = <8>;
-		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-ddr52 = <0x6>;
-		ti,otap-del-sel-hs200 = <0x8>;
-		ti,otap-del-sel-hs400 = <0x5>;
-		ti,itap-del-sel-legacy = <0x10>;
-		ti,itap-del-sel-mmc-hs = <0xa>;
-		ti,strobe-sel = <0x77>;
-		ti,clkbuf-sel = <0x7>;
-		ti,trm-icp = <0x8>;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		dma-coherent;
-		status = "disabled";
-	};
-
-	main_sdhci1: mmc@4fb0000 {
-		compatible = "ti,j721e-sdhci-4bit";
-		reg = <0x00 0x04fb0000 0x00 0x1000>,
-		      <0x00 0x04fb8000 0x00 0x400>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 141 3>, <&k3_clks 141 4>;
-		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 141 4>;
-		assigned-clock-parents = <&k3_clks 141 5>;
-		bus-width = <4>;
-		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x5>;
-		ti,otap-del-sel-ddr50 = <0xc>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
-		ti,itap-del-sel-ddr50 = <0x2>;
-		ti,clkbuf-sel = <0x7>;
-		ti,trm-icp = <0x8>;
-		dma-coherent;
-		status = "disabled";
-	};
-
-	pcie0_rc: pcie@2900000 {
-		compatible = "ti,j784s4-pcie-host";
-		reg = <0x00 0x02900000 0x00 0x1000>,
-		      <0x00 0x02907000 0x00 0x400>,
-		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x10000000 0x00 0x00001000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
-		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
-		max-link-speed = <3>;
-		num-lanes = <4>;
-		power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 332 0>;
-		clock-names = "fck";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x0 0xff>;
-		vendor-id = <0x104c>;
-		device-id = <0xb012>;
-		msi-map = <0x0 &gic_its 0x0 0x10000>;
-		dma-coherent;
-		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
-		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
-		status = "disabled";
-	};
-
-	pcie1_rc: pcie@2910000 {
-		compatible = "ti,j784s4-pcie-host";
-		reg = <0x00 0x02910000 0x00 0x1000>,
-		      <0x00 0x02917000 0x00 0x400>,
-		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
-		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
-		max-link-speed = <3>;
-		num-lanes = <4>;
-		power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 333 0>;
-		clock-names = "fck";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x0 0xff>;
-		vendor-id = <0x104c>;
-		device-id = <0xb012>;
-		msi-map = <0x0 &gic_its 0x10000 0x10000>;
-		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
-		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
-		status = "disabled";
-	};
-
-	pcie2_rc: pcie@2920000 {
-		compatible = "ti,j784s4-pcie-host";
-		reg = <0x00 0x02920000 0x00 0x1000>,
-		      <0x00 0x02927000 0x00 0x400>,
-		      <0x00 0x0e000000 0x00 0x00800000>,
-		      <0x44 0x00000000 0x00 0x00001000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
-		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
-		max-link-speed = <3>;
-		num-lanes = <2>;
-		power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 334 0>;
-		clock-names = "fck";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x0 0xff>;
-		vendor-id = <0x104c>;
-		device-id = <0xb012>;
-		msi-map = <0x0 &gic_its 0x20000 0x10000>;
-		dma-coherent;
-		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
-		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
-		status = "disabled";
-	};
-
-	pcie3_rc: pcie@2930000 {
-		compatible = "ti,j784s4-pcie-host";
-		reg = <0x00 0x02930000 0x00 0x1000>,
-		      <0x00 0x02937000 0x00 0x400>,
-		      <0x00 0x0e800000 0x00 0x00800000>,
-		      <0x44 0x10000000 0x00 0x00001000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
-		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
-		max-link-speed = <3>;
-		num-lanes = <2>;
-		power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 335 0>;
-		clock-names = "fck";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x0 0xff>;
-		vendor-id = <0x104c>;
-		device-id = <0xb012>;
-		msi-map = <0x0 &gic_its 0x30000 0x10000>;
-		dma-coherent;
-		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
-		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
-		status = "disabled";
-	};
-
-	serdes_wiz0: wiz@5060000 {
-		compatible = "ti,j784s4-wiz-10g";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>;
-		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
-		assigned-clocks = <&k3_clks 404 6>;
-		assigned-clock-parents = <&k3_clks 404 10>;
-		num-lanes = <4>;
-		#reset-cells = <1>;
-		#clock-cells = <1>;
-		ranges = <0x5060000 0x00 0x5060000 0x10000>;
-		status = "disabled";
-
-		serdes0: serdes@5060000 {
-			compatible = "ti,j721e-serdes-10g";
-			reg = <0x05060000 0x010000>;
-			reg-names = "torrent_phy";
-			resets = <&serdes_wiz0 0>;
-			reset-names = "torrent_reset";
-			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
-				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
-			clock-names = "refclk", "phy_en_refclk";
-			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
-					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
-					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
-			assigned-clock-parents = <&k3_clks 404 6>,
-						 <&k3_clks 404 6>,
-						 <&k3_clks 404 6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-			status = "disabled";
-		};
-	};
-
-	serdes_wiz1: wiz@5070000 {
-		compatible = "ti,j784s4-wiz-10g";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>;
-		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
-		assigned-clocks = <&k3_clks 405 6>;
-		assigned-clock-parents = <&k3_clks 405 10>;
-		num-lanes = <4>;
-		#reset-cells = <1>;
-		#clock-cells = <1>;
-		ranges = <0x05070000 0x00 0x05070000 0x10000>;
-		status = "disabled";
-
-		serdes1: serdes@5070000 {
-			compatible = "ti,j721e-serdes-10g";
-			reg = <0x05070000 0x010000>;
-			reg-names = "torrent_phy";
-			resets = <&serdes_wiz1 0>;
-			reset-names = "torrent_reset";
-			clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
-				 <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
-			clock-names = "refclk", "phy_en_refclk";
-			assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
-					  <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
-					  <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
-			assigned-clock-parents = <&k3_clks 405 6>,
-						 <&k3_clks 405 6>,
-						 <&k3_clks 405 6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-			status = "disabled";
-		};
-	};
-
-	serdes_wiz2: wiz@5020000 {
-		compatible = "ti,j784s4-wiz-10g";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>;
-		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
-		assigned-clocks = <&k3_clks 406 6>;
-		assigned-clock-parents = <&k3_clks 406 10>;
-		num-lanes = <4>;
-		#reset-cells = <1>;
-		#clock-cells = <1>;
-		ranges = <0x05020000 0x00 0x05020000 0x10000>;
-		status = "disabled";
-
-		serdes2: serdes@5020000 {
-			compatible = "ti,j721e-serdes-10g";
-			reg = <0x05020000 0x010000>;
-			reg-names = "torrent_phy";
-			resets = <&serdes_wiz2 0>;
-			reset-names = "torrent_reset";
-			clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
-				 <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>;
-			clock-names = "refclk", "phy_en_refclk";
-			assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
-					  <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>,
-					  <&serdes_wiz2 TI_WIZ_REFCLK_DIG>;
-			assigned-clock-parents = <&k3_clks 406 6>,
-						 <&k3_clks 406 6>,
-						 <&k3_clks 406 6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-			status = "disabled";
-		};
-	};
-
-	serdes_wiz4: wiz@5050000 {
-		compatible = "ti,j784s4-wiz-10g";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>;
-		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
-		assigned-clocks = <&k3_clks 407 6>;
-		assigned-clock-parents = <&k3_clks 407 10>;
-		num-lanes = <4>;
-		#reset-cells = <1>;
-		#clock-cells = <1>;
-		ranges = <0x05050000 0x00 0x05050000 0x10000>,
-			 <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */
-		status = "disabled";
-
-		serdes4: serdes@5050000 {
-			/*
-			 * Note: we also map DPTX PHY registers as the Torrent
-			 * needs to manage those.
-			 */
-			compatible = "ti,j721e-serdes-10g";
-			reg = <0x05050000 0x010000>,
-			      <0x0a030a00 0x40>; /* DPTX PHY */
-			reg-names = "torrent_phy";
-			resets = <&serdes_wiz4 0>;
-			reset-names = "torrent_reset";
-			clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
-				 <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>;
-			clock-names = "refclk", "phy_en_refclk";
-			assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
-					  <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
-					  <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
-			assigned-clock-parents = <&k3_clks 407 6>,
-						 <&k3_clks 407 6>,
-						 <&k3_clks 407 6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-			status = "disabled";
-		};
-	};
-
-	main_navss: bus@30000000 {
-		bootph-all;
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
-		ti,sci-dev-id = <280>;
-		dma-coherent;
-		dma-ranges;
-
-		main_navss_intr: interrupt-controller@310e0000 {
-			compatible = "ti,sci-intr";
-			reg = <0x00 0x310e0000 0x00 0x4000>;
-			ti,intr-trigger-type = <4>;
-			interrupt-controller;
-			interrupt-parent = <&gic500>;
-			#interrupt-cells = <1>;
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <283>;
-			ti,interrupt-ranges = <0 64 64>,
-					      <64 448 64>,
-					      <128 672 64>;
-		};
-
-		main_udmass_inta: msi-controller@33d00000 {
-			compatible = "ti,sci-inta";
-			reg = <0x00 0x33d00000 0x00 0x100000>;
-			interrupt-controller;
-			#interrupt-cells = <0>;
-			interrupt-parent = <&main_navss_intr>;
-			msi-controller;
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <321>;
-			ti,interrupt-ranges = <0 0 256>;
-			ti,unmapped-event-sources = <&main_bcdma_csi>;
-		};
-
-		secure_proxy_main: mailbox@32c00000 {
-			bootph-all;
-			compatible = "ti,am654-secure-proxy";
-			#mbox-cells = <1>;
-			reg-names = "target_data", "rt", "scfg";
-			reg = <0x00 0x32c00000 0x00 0x100000>,
-			      <0x00 0x32400000 0x00 0x100000>,
-			      <0x00 0x32800000 0x00 0x100000>;
-			interrupt-names = "rx_011";
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		hwspinlock: hwlock@30e00000 {
-			compatible = "ti,am654-hwspinlock";
-			reg = <0x00 0x30e00000 0x00 0x1000>;
-			#hwlock-cells = <1>;
-		};
-
-		mailbox0_cluster0: mailbox@31f80000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f80000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster1: mailbox@31f81000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f81000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster2: mailbox@31f82000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f82000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster3: mailbox@31f83000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f83000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster4: mailbox@31f84000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f84000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster5: mailbox@31f85000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f85000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster6: mailbox@31f86000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f86000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster7: mailbox@31f87000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f87000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster8: mailbox@31f88000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f88000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster9: mailbox@31f89000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f89000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster10: mailbox@31f8a000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f8a000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox0_cluster11: mailbox@31f8b000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f8b000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster0: mailbox@31f90000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f90000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster1: mailbox@31f91000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f91000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster2: mailbox@31f92000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f92000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster3: mailbox@31f93000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f93000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster4: mailbox@31f94000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f94000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster5: mailbox@31f95000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f95000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster6: mailbox@31f96000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f96000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster7: mailbox@31f97000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f97000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster8: mailbox@31f98000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f98000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster9: mailbox@31f99000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f99000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster10: mailbox@31f9a000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f9a000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		mailbox1_cluster11: mailbox@31f9b000 {
-			compatible = "ti,am654-mailbox";
-			reg = <0x00 0x31f9b000 0x00 0x200>;
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <16>;
-			interrupt-parent = <&main_navss_intr>;
-			status = "disabled";
-		};
-
-		main_ringacc: ringacc@3c000000 {
-			compatible = "ti,am654-navss-ringacc";
-			reg = <0x00 0x3c000000 0x00 0x400000>,
-			      <0x00 0x38000000 0x00 0x400000>,
-			      <0x00 0x31120000 0x00 0x100>,
-			      <0x00 0x33000000 0x00 0x40000>,
-			      <0x00 0x31080000 0x00 0x40000>;
-			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
-			ti,num-rings = <1024>;
-			ti,sci-rm-range-gp-rings = <0x1>;
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <315>;
-			msi-parent = <&main_udmass_inta>;
-		};
-
-		main_udmap: dma-controller@31150000 {
-			compatible = "ti,j721e-navss-main-udmap";
-			reg = <0x00 0x31150000 0x00 0x100>,
-			      <0x00 0x34000000 0x00 0x80000>,
-			      <0x00 0x35000000 0x00 0x200000>,
-			      <0x00 0x30b00000 0x00 0x20000>,
-			      <0x00 0x30c00000 0x00 0x8000>,
-			      <0x00 0x30d00000 0x00 0x4000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt",
-				    "tchan", "rchan", "rflow";
-			msi-parent = <&main_udmass_inta>;
-			#dma-cells = <1>;
-
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <319>;
-			ti,ringacc = <&main_ringacc>;
-
-			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
-						<0x0f>, /* TX_HCHAN */
-						<0x10>; /* TX_UHCHAN */
-			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
-						<0x0b>, /* RX_HCHAN */
-						<0x0c>; /* RX_UHCHAN */
-			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
-		};
-
-		main_bcdma_csi: dma-controller@311a0000 {
-			compatible = "ti,j721s2-dmss-bcdma-csi";
-			reg = <0x00 0x311a0000 0x00 0x100>,
-			      <0x00 0x35d00000 0x00 0x20000>,
-			      <0x00 0x35c00000 0x00 0x10000>,
-			      <0x00 0x35e00000 0x00 0x80000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
-			msi-parent = <&main_udmass_inta>;
-			#dma-cells = <3>;
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <281>;
-			ti,sci-rm-range-rchan = <0x21>;
-			ti,sci-rm-range-tchan = <0x22>;
-		};
-
-		cpts@310d0000 {
-			compatible = "ti,j721e-cpts";
-			reg = <0x00 0x310d0000 0x00 0x400>;
-			reg-names = "cpts";
-			clocks = <&k3_clks 282 0>;
-			clock-names = "cpts";
-			assigned-clocks = <&k3_clks 62 3>; /* CPTS_RFT_CLK */
-			assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */
-			interrupts-extended = <&main_navss_intr 391>;
-			interrupt-names = "cpts";
-			ti,cpts-periodic-outputs = <6>;
-			ti,cpts-ext-ts-inputs = <8>;
-		};
-	};
-
-	main_cpsw0: ethernet@c000000 {
-		compatible = "ti,j784s4-cpswxg-nuss";
-		reg = <0x00 0xc000000 0x00 0x200000>;
-		reg-names = "cpsw_nuss";
-		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dma-coherent;
-		clocks = <&k3_clks 64 0>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
-
-		dmas = <&main_udmap 0xca00>,
-		       <&main_udmap 0xca01>,
-		       <&main_udmap 0xca02>,
-		       <&main_udmap 0xca03>,
-		       <&main_udmap 0xca04>,
-		       <&main_udmap 0xca05>,
-		       <&main_udmap 0xca06>,
-		       <&main_udmap 0xca07>,
-		       <&main_udmap 0x4a00>;
-		dma-names = "tx0", "tx1", "tx2", "tx3",
-			    "tx4", "tx5", "tx6", "tx7",
-			    "rx";
-
-		status = "disabled";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			main_cpsw0_port1: port@1 {
-				reg = <1>;
-				label = "port1";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port2: port@2 {
-				reg = <2>;
-				label = "port2";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port3: port@3 {
-				reg = <3>;
-				label = "port3";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port4: port@4 {
-				reg = <4>;
-				label = "port4";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port5: port@5 {
-				reg = <5>;
-				label = "port5";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port6: port@6 {
-				reg = <6>;
-				label = "port6";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port7: port@7 {
-				reg = <7>;
-				label = "port7";
-				ti,mac-only;
-				status = "disabled";
-			};
-
-			main_cpsw0_port8: port@8 {
-				reg = <8>;
-				label = "port8";
-				ti,mac-only;
-				status = "disabled";
-			};
-		};
-
-		main_cpsw0_mdio: mdio@f00 {
-			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-			reg = <0x00 0xf00 0x00 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&k3_clks 64 0>;
-			clock-names = "fck";
-			bus_freq = <1000000>;
-			status = "disabled";
-		};
-
-		cpts@3d000 {
-			compatible = "ti,am65-cpts";
-			reg = <0x00 0x3d000 0x00 0x400>;
-			clocks = <&k3_clks 64 3>;
-			clock-names = "cpts";
-			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cpts";
-			ti,cpts-ext-ts-inputs = <4>;
-			ti,cpts-periodic-outputs = <2>;
-		};
-	};
-
-	main_cpsw1: ethernet@c200000 {
-		compatible = "ti,j721e-cpsw-nuss";
-		reg = <0x00 0xc200000 0x00 0x200000>;
-		reg-names = "cpsw_nuss";
-		ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dma-coherent;
-		clocks = <&k3_clks 62 0>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
-
-		dmas = <&main_udmap 0xc640>,
-			<&main_udmap 0xc641>,
-			<&main_udmap 0xc642>,
-			<&main_udmap 0xc643>,
-			<&main_udmap 0xc644>,
-			<&main_udmap 0xc645>,
-			<&main_udmap 0xc646>,
-			<&main_udmap 0xc647>,
-			<&main_udmap 0x4640>;
-		dma-names = "tx0", "tx1", "tx2", "tx3",
-				"tx4", "tx5", "tx6", "tx7",
-				"rx";
-
-		status = "disabled";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			main_cpsw1_port1: port@1 {
-				reg = <1>;
-				label = "port1";
-				phys = <&cpsw1_phy_gmii_sel 1>;
-				ti,mac-only;
-				status = "disabled";
-			};
-		};
-
-		main_cpsw1_mdio: mdio@f00 {
-			compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
-			reg = <0x00 0xf00 0x00 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&k3_clks 62 0>;
-			clock-names = "fck";
-			bus_freq = <1000000>;
-			status = "disabled";
-		};
-
-		cpts@3d000 {
-			compatible = "ti,am65-cpts";
-			reg = <0x00 0x3d000 0x00 0x400>;
-			clocks = <&k3_clks 62 3>;
-			clock-names = "cpts";
-			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cpts";
-			ti,cpts-ext-ts-inputs = <4>;
-			ti,cpts-periodic-outputs = <2>;
-		};
-	};
-
-	main_mcan0: can@2701000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02701000 0x00 0x200>,
-		      <0x00 0x02708000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 245 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 245 6>, <&k3_clks 245 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan1: can@2711000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02711000 0x00 0x200>,
-		      <0x00 0x02718000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 246 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 246 6>, <&k3_clks 246 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan2: can@2721000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02721000 0x00 0x200>,
-		      <0x00 0x02728000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 247 6>, <&k3_clks 247 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan3: can@2731000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02731000 0x00 0x200>,
-		      <0x00 0x02738000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 248 6>, <&k3_clks 248 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan4: can@2741000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02741000 0x00 0x200>,
-		      <0x00 0x02748000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 249 6>, <&k3_clks 249 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan5: can@2751000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02751000 0x00 0x200>,
-		      <0x00 0x02758000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 250 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 250 6>, <&k3_clks 250 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan6: can@2761000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02761000 0x00 0x200>,
-		      <0x00 0x02768000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 251 6>, <&k3_clks 251 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan7: can@2771000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02771000 0x00 0x200>,
-		      <0x00 0x02778000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 252 6>, <&k3_clks 252 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan8: can@2781000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02781000 0x00 0x200>,
-		      <0x00 0x02788000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 253 6>, <&k3_clks 253 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan9: can@2791000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02791000 0x00 0x200>,
-		      <0x00 0x02798000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 254 6>, <&k3_clks 254 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan10: can@27a1000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x027a1000 0x00 0x200>,
-		      <0x00 0x027a8000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 255 6>, <&k3_clks 255 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan11: can@27b1000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x027b1000 0x00 0x200>,
-		      <0x00 0x027b8000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 256 6>, <&k3_clks 256 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan12: can@27c1000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x027c1000 0x00 0x200>,
-		      <0x00 0x027c8000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 257 6>, <&k3_clks 257 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan13: can@27d1000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x027d1000 0x00 0x200>,
-		      <0x00 0x027d8000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 258 6>, <&k3_clks 258 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan14: can@2681000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02681000 0x00 0x200>,
-		      <0x00 0x02688000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 259 6>, <&k3_clks 259 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan15: can@2691000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x02691000 0x00 0x200>,
-		      <0x00 0x02698000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 260 6>, <&k3_clks 260 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan16: can@26a1000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x026a1000 0x00 0x200>,
-		      <0x00 0x026a8000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 261 6>, <&k3_clks 261 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan17: can@26b1000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x026b1000 0x00 0x200>,
-		      <0x00 0x026b8000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 262 6>, <&k3_clks 262 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_spi0: spi@2100000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02100000 0x00 0x400>;
-		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 376 1>;
-		status = "disabled";
-	};
-
-	main_spi1: spi@2110000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02110000 0x00 0x400>;
-		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 377 1>;
-		status = "disabled";
-	};
-
-	main_spi2: spi@2120000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02120000 0x00 0x400>;
-		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 378 1>;
-		status = "disabled";
-	};
-
-	main_spi3: spi@2130000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02130000 0x00 0x400>;
-		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 379 1>;
-		status = "disabled";
-	};
-
-	main_spi4: spi@2140000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02140000 0x00 0x400>;
-		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 380 1>;
-		status = "disabled";
-	};
-
-	main_spi5: spi@2150000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02150000 0x00 0x400>;
-		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 381 1>;
-		status = "disabled";
-	};
-
-	main_spi6: spi@2160000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02160000 0x00 0x400>;
-		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 382 1>;
-		status = "disabled";
-	};
-
-	main_spi7: spi@2170000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x02170000 0x00 0x400>;
-		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 383 1>;
-		status = "disabled";
-	};
-
-	ufs_wrapper: ufs-wrapper@4e80000 {
-		compatible = "ti,j721e-ufs";
-		reg = <0x00 0x4e80000 0x00 0x100>;
-		power-domains = <&k3_pds 387 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 387 3>;
-		assigned-clocks = <&k3_clks 387 3>;
-		assigned-clock-parents = <&k3_clks 387 6>;
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		status = "disabled";
-
-		ufs@4e84000 {
-			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
-			reg = <0x00 0x4e84000 0x00 0x10000>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			freq-table-hz = <250000000 250000000>, <19200000 19200000>,
-					<19200000 19200000>;
-			clocks = <&k3_clks 387 1>, <&k3_clks 387 3>, <&k3_clks 387 3>;
-			clock-names = "core_clk", "phy_clk", "ref_clk";
-			dma-coherent;
-		};
-	};
-
-	main_r5fss0: r5fss@5c00000 {
-		compatible = "ti,j721s2-r5fss";
-		ti,cluster-mode = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
-			 <0x5d00000 0x00 0x5d00000 0x20000>;
-		power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
-
-		main_r5fss0_core0: r5f@5c00000 {
-			compatible = "ti,j721s2-r5f";
-			reg = <0x5c00000 0x00010000>,
-			      <0x5c10000 0x00010000>;
-			reg-names = "atcm", "btcm";
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <339>;
-			ti,sci-proc-ids = <0x06 0xff>;
-			resets = <&k3_reset 339 1>;
-			firmware-name = "j784s4-main-r5f0_0-fw";
-			ti,atcm-enable = <1>;
-			ti,btcm-enable = <1>;
-			ti,loczrama = <1>;
-		};
-
-		main_r5fss0_core1: r5f@5d00000 {
-			compatible = "ti,j721s2-r5f";
-			reg = <0x5d00000 0x00010000>,
-			      <0x5d10000 0x00010000>;
-			reg-names = "atcm", "btcm";
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <340>;
-			ti,sci-proc-ids = <0x07 0xff>;
-			resets = <&k3_reset 340 1>;
-			firmware-name = "j784s4-main-r5f0_1-fw";
-			ti,atcm-enable = <1>;
-			ti,btcm-enable = <1>;
-			ti,loczrama = <1>;
-		};
-	};
-
-	main_r5fss1: r5fss@5e00000 {
-		compatible = "ti,j721s2-r5fss";
-		ti,cluster-mode = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
-			 <0x5f00000 0x00 0x5f00000 0x20000>;
-		power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
-
-		main_r5fss1_core0: r5f@5e00000 {
-			compatible = "ti,j721s2-r5f";
-			reg = <0x5e00000 0x00010000>,
-			      <0x5e10000 0x00010000>;
-			reg-names = "atcm", "btcm";
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <341>;
-			ti,sci-proc-ids = <0x08 0xff>;
-			resets = <&k3_reset 341 1>;
-			firmware-name = "j784s4-main-r5f1_0-fw";
-			ti,atcm-enable = <1>;
-			ti,btcm-enable = <1>;
-			ti,loczrama = <1>;
-		};
-
-		main_r5fss1_core1: r5f@5f00000 {
-			compatible = "ti,j721s2-r5f";
-			reg = <0x5f00000 0x00010000>,
-			      <0x5f10000 0x00010000>;
-			reg-names = "atcm", "btcm";
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <342>;
-			ti,sci-proc-ids = <0x09 0xff>;
-			resets = <&k3_reset 342 1>;
-			firmware-name = "j784s4-main-r5f1_1-fw";
-			ti,atcm-enable = <1>;
-			ti,btcm-enable = <1>;
-			ti,loczrama = <1>;
-		};
-	};
-
-	main_r5fss2: r5fss@5900000 {
-		compatible = "ti,j721s2-r5fss";
-		ti,cluster-mode = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5900000 0x00 0x5900000 0x20000>,
-			 <0x5a00000 0x00 0x5a00000 0x20000>;
-		power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
-
-		main_r5fss2_core0: r5f@5900000 {
-			compatible = "ti,j721s2-r5f";
-			reg = <0x5900000 0x00010000>,
-			      <0x5910000 0x00010000>;
-			reg-names = "atcm", "btcm";
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <343>;
-			ti,sci-proc-ids = <0x0a 0xff>;
-			resets = <&k3_reset 343 1>;
-			firmware-name = "j784s4-main-r5f2_0-fw";
-			ti,atcm-enable = <1>;
-			ti,btcm-enable = <1>;
-			ti,loczrama = <1>;
-		};
-
-		main_r5fss2_core1: r5f@5a00000 {
-			compatible = "ti,j721s2-r5f";
-			reg = <0x5a00000 0x00010000>,
-			      <0x5a10000 0x00010000>;
-			reg-names = "atcm", "btcm";
-			ti,sci = <&sms>;
-			ti,sci-dev-id = <344>;
-			ti,sci-proc-ids = <0x0b 0xff>;
-			resets = <&k3_reset 344 1>;
-			firmware-name = "j784s4-main-r5f2_1-fw";
-			ti,atcm-enable = <1>;
-			ti,btcm-enable = <1>;
-			ti,loczrama = <1>;
-		};
-	};
-
-	c71_0: dsp@64800000 {
-		compatible = "ti,j721s2-c71-dsp";
-		reg = <0x00 0x64800000 0x00 0x00080000>,
-		      <0x00 0x64e00000 0x00 0x0000c000>;
-		reg-names = "l2sram", "l1dram";
-		ti,sci = <&sms>;
-		ti,sci-dev-id = <30>;
-		ti,sci-proc-ids = <0x30 0xff>;
-		resets = <&k3_reset 30 1>;
-		firmware-name = "j784s4-c71_0-fw";
-		status = "disabled";
-	};
-
-	c71_1: dsp@65800000 {
-		compatible = "ti,j721s2-c71-dsp";
-		reg = <0x00 0x65800000 0x00 0x00080000>,
-		      <0x00 0x65e00000 0x00 0x0000c000>;
-		reg-names = "l2sram", "l1dram";
-		ti,sci = <&sms>;
-		ti,sci-dev-id = <33>;
-		ti,sci-proc-ids = <0x31 0xff>;
-		resets = <&k3_reset 33 1>;
-		firmware-name = "j784s4-c71_1-fw";
-		status = "disabled";
-	};
-
-	c71_2: dsp@66800000 {
-		compatible = "ti,j721s2-c71-dsp";
-		reg = <0x00 0x66800000 0x00 0x00080000>,
-		      <0x00 0x66e00000 0x00 0x0000c000>;
-		reg-names = "l2sram", "l1dram";
-		ti,sci = <&sms>;
-		ti,sci-dev-id = <37>;
-		ti,sci-proc-ids = <0x32 0xff>;
-		resets = <&k3_reset 37 1>;
-		firmware-name = "j784s4-c71_2-fw";
-		status = "disabled";
-	};
-
+&cbass_main {
 	c71_3: dsp@67800000 {
 		compatible = "ti,j721s2-c71-dsp";
 		reg = <0x00 0x67800000 0x00 0x00080000>,
 		      <0x00 0x67e00000 0x00 0x0000c000>;
 		reg-names = "l2sram", "l1dram";
+		resets = <&k3_reset 40 1>;
+		firmware-name = "j784s4-c71_3-fw";
 		ti,sci = <&sms>;
 		ti,sci-dev-id = <40>;
 		ti,sci-proc-ids = <0x33 0xff>;
-		resets = <&k3_reset 40 1>;
-		firmware-name = "j784s4-c71_3-fw";
-		status = "disabled";
-	};
-
-	main_esm: esm@700000 {
-		compatible = "ti,j721e-esm";
-		reg = <0x00 0x700000 0x00 0x1000>;
-		ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>,
-			      <695>;
-		bootph-pre-ram;
-	};
-
-	watchdog0: watchdog@2200000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2200000 0x00 0x100>;
-		clocks = <&k3_clks 348 0>;
-		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 348 0>;
-		assigned-clock-parents = <&k3_clks 348 4>;
-	};
-
-	watchdog1: watchdog@2210000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2210000 0x00 0x100>;
-		clocks = <&k3_clks 349 0>;
-		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 349 0>;
-		assigned-clock-parents = <&k3_clks 349 4>;
-	};
-
-	watchdog2: watchdog@2220000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2220000 0x00 0x100>;
-		clocks = <&k3_clks 350 0>;
-		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 350 0>;
-		assigned-clock-parents = <&k3_clks 350 4>;
-	};
-
-	watchdog3: watchdog@2230000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2230000 0x00 0x100>;
-		clocks = <&k3_clks 351 0>;
-		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 351 0>;
-		assigned-clock-parents = <&k3_clks 351 4>;
-	};
-
-	watchdog4: watchdog@2240000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2240000 0x00 0x100>;
-		clocks = <&k3_clks 352 0>;
-		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 352 0>;
-		assigned-clock-parents = <&k3_clks 352 4>;
-	};
-
-	watchdog5: watchdog@2250000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2250000 0x00 0x100>;
-		clocks = <&k3_clks 353 0>;
-		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 353 0>;
-		assigned-clock-parents = <&k3_clks 353 4>;
-	};
-
-	watchdog6: watchdog@2260000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2260000 0x00 0x100>;
-		clocks = <&k3_clks 354 0>;
-		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 354 0>;
-		assigned-clock-parents = <&k3_clks 354 4>;
-	};
-
-	watchdog7: watchdog@2270000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2270000 0x00 0x100>;
-		clocks = <&k3_clks 355 0>;
-		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 355 0>;
-		assigned-clock-parents = <&k3_clks 355 4>;
-	};
-
-	/*
-	 * The following RTI instances are coupled with MCU R5Fs, c7x and
-	 * GPU so keeping them reserved as these will be used by their
-	 * respective firmware
-	 */
-	watchdog8: watchdog@22f0000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x22f0000 0x00 0x100>;
-		clocks = <&k3_clks 360 0>;
-		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 360 0>;
-		assigned-clock-parents = <&k3_clks 360 4>;
-		/* reserved for GPU */
-		status = "reserved";
-	};
-
-	watchdog9: watchdog@2300000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2300000 0x00 0x100>;
-		clocks = <&k3_clks 356 0>;
-		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 356 0>;
-		assigned-clock-parents = <&k3_clks 356 4>;
-		/* reserved for C7X_0 DSP */
-		status = "reserved";
-	};
-
-	watchdog10: watchdog@2310000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2310000 0x00 0x100>;
-		clocks = <&k3_clks 357 0>;
-		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 357 0>;
-		assigned-clock-parents = <&k3_clks 357 4>;
-		/* reserved for C7X_1 DSP */
-		status = "reserved";
-	};
-
-	watchdog11: watchdog@2320000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2320000 0x00 0x100>;
-		clocks = <&k3_clks 358 0>;
-		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 358 0>;
-		assigned-clock-parents = <&k3_clks 358 4>;
-		/* reserved for C7X_2 DSP */
-		status = "reserved";
-	};
-
-	watchdog12: watchdog@2330000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2330000 0x00 0x100>;
-		clocks = <&k3_clks 359 0>;
-		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 359 0>;
-		assigned-clock-parents = <&k3_clks 359 4>;
-		/* reserved for C7X_3 DSP */
-		status = "reserved";
-	};
-
-	watchdog13: watchdog@23c0000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x23c0000 0x00 0x100>;
-		clocks = <&k3_clks 361 0>;
-		power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 361 0>;
-		assigned-clock-parents = <&k3_clks 361 4>;
-		/* reserved for MAIN_R5F0_0 */
-		status = "reserved";
-	};
-
-	watchdog14: watchdog@23d0000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x23d0000 0x00 0x100>;
-		clocks = <&k3_clks 362 0>;
-		power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 362 0>;
-		assigned-clock-parents = <&k3_clks 362 4>;
-		/* reserved for MAIN_R5F0_1 */
-		status = "reserved";
-	};
-
-	watchdog15: watchdog@23e0000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x23e0000 0x00 0x100>;
-		clocks = <&k3_clks 363 0>;
-		power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 363 0>;
-		assigned-clock-parents = <&k3_clks 363 4>;
-		/* reserved for MAIN_R5F1_0 */
-		status = "reserved";
-	};
-
-	watchdog16: watchdog@23f0000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x23f0000 0x00 0x100>;
-		clocks = <&k3_clks 364 0>;
-		power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 364 0>;
-		assigned-clock-parents = <&k3_clks 364 4>;
-		/* reserved for MAIN_R5F1_1 */
-		status = "reserved";
-	};
-
-	watchdog17: watchdog@2540000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2540000 0x00 0x100>;
-		clocks = <&k3_clks 365 0>;
-		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 365 0>;
-		assigned-clock-parents = <&k3_clks 366 4>;
-		/* reserved for MAIN_R5F2_0 */
-		status = "reserved";
-	};
-
-	watchdog18: watchdog@2550000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x2550000 0x00 0x100>;
-		clocks = <&k3_clks 366 0>;
-		power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 366 0>;
-		assigned-clock-parents = <&k3_clks 366 4>;
-		/* reserved for MAIN_R5F2_1 */
-		status = "reserved";
-	};
-
-	mhdp: bridge@a000000 {
-		compatible = "ti,j721e-mhdp8546";
-		reg = <0x0 0xa000000 0x0 0x30a00>,
-		      <0x0 0x4f40000 0x0 0x20>;
-		reg-names = "mhdptx", "j721e-intg";
-		clocks = <&k3_clks 217 11>;
-		interrupt-parent = <&gic500>;
-		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-
-		dp0_ports: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Remote-endpoints are on the boards so
-			 * ports are defined in the platform dt file.
-			 */
-		};
-	};
-
-	dss: dss@4a00000 {
-		compatible = "ti,j721e-dss";
-		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
-		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
-		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
-		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
-		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
-		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
-		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
-		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
-		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
-		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
-		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
-		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
-		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
-		      <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */
-		      <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */
-		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
-		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
-		reg-names = "common_m", "common_s0",
-			    "common_s1", "common_s2",
-			    "vidl1", "vidl2","vid1","vid2",
-			    "ovr1", "ovr2", "ovr3", "ovr4",
-			    "vp1", "vp2", "vp3", "vp4",
-			    "wb";
-		clocks = <&k3_clks 218 0>,
-			 <&k3_clks 218 2>,
-			 <&k3_clks 218 5>,
-			 <&k3_clks 218 14>,
-			 <&k3_clks 218 18>;
-		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
-		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
-		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "common_m",
-				  "common_s0",
-				  "common_s1",
-				  "common_s2";
 		status = "disabled";
-
-		dss_ports: ports {
-			/* Ports that DSS drives are platform specific
-			 * so they are defined in platform dt file.
-			 */
-		};
 	};
 
-	mcasp0: mcasp@2b00000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b00000 0x00 0x2000>,
-		      <0x00 0x02b08000 0x00 0x1000>;
-		reg-names = "mpu","dat";
-		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
-		dma-names = "tx", "rx";
-		clocks = <&k3_clks 265 0>;
+	pcie2_rc: pcie@2920000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x00001000>;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 334 0>;
 		clock-names = "fck";
-		assigned-clocks = <&k3_clks 265 0>;
-		assigned-clock-parents = <&k3_clks 265 1>;
-		power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x20000 0x10000>;
+		dma-coherent;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
 		status = "disabled";
 	};
 
-	mcasp1: mcasp@2b10000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b10000 0x00 0x2000>,
-		      <0x00 0x02b18000 0x00 0x1000>;
-		reg-names = "mpu","dat";
-		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
-		dma-names = "tx", "rx";
-		clocks = <&k3_clks 266 0>;
+	pcie3_rc: pcie@2930000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x00001000>;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 335 0>;
 		clock-names = "fck";
-		assigned-clocks = <&k3_clks 266 0>;
-		assigned-clock-parents = <&k3_clks 266 1>;
-		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x30000 0x10000>;
+		dma-coherent;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
 		status = "disabled";
 	};
 
-	mcasp2: mcasp@2b20000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b20000 0x00 0x2000>,
-		      <0x00 0x02b28000 0x00 0x1000>;
-		reg-names = "mpu","dat";
-		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
-		dma-names = "tx", "rx";
-		clocks = <&k3_clks 267 0>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 267 0>;
-		assigned-clock-parents = <&k3_clks 267 1>;
-		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j784s4-wiz-10g";
+		ranges = <0x05020000 0x00 0x05020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 406 6>;
+		assigned-clock-parents = <&k3_clks 406 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
 		status = "disabled";
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05020000 0x010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz2 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz2 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 406 6>,
+						 <&k3_clks 406 6>,
+						 <&k3_clks 406 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
 	};
+};
 
-	mcasp3: mcasp@2b30000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b30000 0x00 0x2000>,
-		      <0x00 0x02b38000 0x00 0x1000>;
-		reg-names = "mpu","dat";
-		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
-		dma-names = "tx", "rx";
-		clocks = <&k3_clks 268 0>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 268 0>;
-		assigned-clock-parents = <&k3_clks 268 1>;
-		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
+&scm_conf {
+	pcie2_ctrl: pcie2-ctrl@4078 {
+		compatible = "ti,j784s4-pcie-ctrl", "syscon";
+		reg = <0x4078 0x4>;
 	};
 
-	mcasp4: mcasp@2b40000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b40000 0x00 0x2000>,
-		      <0x00 0x02b48000 0x00 0x1000>;
-		reg-names = "mpu","dat";
-		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
-		dma-names = "tx", "rx";
-		clocks = <&k3_clks 269 0>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 269 0>;
-		assigned-clock-parents = <&k3_clks 269 1>;
-		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
+	pcie3_ctrl: pcie3-ctrl@407c {
+		compatible = "ti,j784s4-pcie-ctrl", "syscon";
+		reg = <0x407c 0x4>;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
index 5e84c6b4f5ad..f5afa32157cb 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -8,18 +8,11 @@
  *
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/ti,sci_pm_domain.h>
-
-#include "k3-pinctrl.h"
+#include "k3-j784s4-j742s2-common.dtsi"
 
 / {
 	model = "Texas Instruments K3 J784S4 SoC";
 	compatible = "ti,j784s4";
-	interrupt-parent = <&gic500>;
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -174,130 +167,6 @@
 			next-level-cache = <&L2_1>;
 		};
 	};
-
-	L2_0: l2-cache0 {
-		compatible = "cache";
-		cache-level = <2>;
-		cache-unified;
-		cache-size = <0x200000>;
-		cache-line-size = <64>;
-		cache-sets = <1024>;
-		next-level-cache = <&msmc_l3>;
-	};
-
-	L2_1: l2-cache1 {
-		compatible = "cache";
-		cache-level = <2>;
-		cache-unified;
-		cache-size = <0x200000>;
-		cache-line-size = <64>;
-		cache-sets = <1024>;
-		next-level-cache = <&msmc_l3>;
-	};
-
-	msmc_l3: l3-cache0 {
-		compatible = "cache";
-		cache-level = <3>;
-		cache-unified;
-	};
-
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-
-		psci: psci {
-			compatible = "arm,psci-1.0";
-			method = "smc";
-		};
-	};
-
-	a72_timer0: timer-cl0-cpu0 {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a72-pmu";
-		/* Recommendation from GIC500 TRM Table A.3 */
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	cbass_main: bus@100000 {
-		bootph-all;
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
-			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
-			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
-			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
-			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
-			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
-			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIe0 Core*/
-			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe1 Core*/
-			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00800000>, /* PCIe2 Core*/
-			 <0x00 0x0e800000 0x00 0x0e800000 0x00 0x00800000>, /* PCIe3 Core*/
-			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
-			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
-			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
-			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
-			 <0x00 0x66800000 0x00 0x66800000 0x00 0x0070c000>, /* C71_3 */
-			 <0x00 0x67800000 0x00 0x67800000 0x00 0x0070c000>, /* C71_4 */
-			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
-			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
-			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
-			 <0x40 0x00000000 0x40 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */
-			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
-			 <0x42 0x00000000 0x42 0x00000000 0x01 0x00000000>, /* PCIe2 DAT1 */
-			 <0x43 0x00000000 0x43 0x00000000 0x01 0x00000000>, /* PCIe3 DAT1 */
-			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT0 */
-			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT0 */
-			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
-
-			 /* MCUSS_WKUP Range */
-			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
-			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
-			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
-			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
-			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
-			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
-			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
-			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
-			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
-			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
-			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
-			 <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>;
-
-		cbass_mcu_wakeup: bus@28380000 {
-			bootph-all;
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
-				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
-				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
-				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
-				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
-				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
-				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
-				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
-				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
-				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
-				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */
-				 <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */
-		};
-	};
-
-	thermal_zones: thermal-zones {
-		#include "k3-j784s4-thermal.dtsi"
-	};
 };
 
-/* Now include peripherals from each bus segment */
 #include "k3-j784s4-main.dtsi"
-#include "k3-j784s4-mcu-wakeup.dtsi"
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi linux-libre-6.12.38-gnu/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 60d1b1acf9a0..385fed8a852a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ linux-libre-6.12.38-gnu/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -10,39 +10,44 @@
 
 #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
 / {
-	pss_ref_clk: pss_ref_clk {
+	pss_ref_clk: pss-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <33333333>;
+		clock-output-names = "pss_ref_clk";
 	};
 
-	video_clk: video_clk {
+	video_clk: video-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
+		clock-output-names = "video_clk";
 	};
 
-	pss_alt_ref_clk: pss_alt_ref_clk {
+	pss_alt_ref_clk: pss-alt-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
+		clock-output-names = "pss_alt_ref_clk";
 	};
 
-	gt_crx_ref_clk: gt_crx_ref_clk {
+	gt_crx_ref_clk: gt-crx-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <108000000>;
+		clock-output-names = "gt_crx_ref_clk";
 	};
 
-	aux_ref_clk: aux_ref_clk {
+	aux_ref_clk: aux-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
+		clock-output-names = "aux_ref_clk";
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/configs/defconfig linux-libre-6.12.38-gnu/arch/arm64/configs/defconfig
index 5fdbfea7a5b2..f988dd79add8 100644
--- linux-libre-6.12-gnu/arch/arm64/configs/defconfig
+++ linux-libre-6.12.38-gnu/arch/arm64/configs/defconfig
@@ -1347,7 +1347,6 @@ CONFIG_SM_DISPCC_6115=m
 CONFIG_SM_DISPCC_8250=y
 CONFIG_SM_DISPCC_8450=m
 CONFIG_SM_DISPCC_8550=m
-CONFIG_SM_DISPCC_8650=m
 CONFIG_SM_GCC_4450=y
 CONFIG_SM_GCC_6115=y
 CONFIG_SM_GCC_8350=y
@@ -1537,6 +1536,9 @@ CONFIG_PHY_HISTB_COMBPHY=y
 CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MTK_TPHY=y
+CONFIG_PHY_MTK_HDMI=m
+CONFIG_PHY_MTK_MIPI_DSI=m
+CONFIG_PHY_MTK_DP=m
 CONFIG_PHY_QCOM_EDP=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
diff --git linux-libre-6.12-gnu/arch/arm64/crypto/Kconfig linux-libre-6.12.38-gnu/arch/arm64/crypto/Kconfig
index e7d9bd8e4709..20c7b828e2fb 100644
--- linux-libre-6.12-gnu/arch/arm64/crypto/Kconfig
+++ linux-libre-6.12.38-gnu/arch/arm64/crypto/Kconfig
@@ -26,10 +26,11 @@ config CRYPTO_NHPOLY1305_NEON
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_POLY1305_NEON
-	tristate "Hash functions: Poly1305 (NEON)"
+	tristate
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_HASH
 	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	default CRYPTO_LIB_POLY1305_INTERNAL
 	help
 	  Poly1305 authenticator algorithm (RFC7539)
 
@@ -186,11 +187,12 @@ config CRYPTO_AES_ARM64_NEON_BLK
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_CHACHA20_NEON
-	tristate "Ciphers: ChaCha (NEON)"
+	tristate
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_CHACHA_GENERIC
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	default CRYPTO_LIB_CHACHA_INTERNAL
 	help
 	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
 	  stream cipher algorithms
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/assembler.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/assembler.h
index bc0b0d75acef..c1f45fd6b3e9 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/assembler.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/assembler.h
@@ -350,6 +350,11 @@ alternative_cb_end
 	// Narrow PARange to fit the PS field in TCR_ELx
 	ubfx	\tmp0, \tmp0, #ID_AA64MMFR0_EL1_PARANGE_SHIFT, #3
 	mov	\tmp1, #ID_AA64MMFR0_EL1_PARANGE_MAX
+#ifdef CONFIG_ARM64_LPA2
+alternative_if_not ARM64_HAS_VA52
+	mov	\tmp1, #ID_AA64MMFR0_EL1_PARANGE_48
+alternative_else_nop_endif
+#endif
 	cmp	\tmp0, \tmp1
 	csel	\tmp0, \tmp1, \tmp0, hi
 	bfi	\tcr, \tmp0, \pos, #3
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/cputype.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/cputype.h
index 488f8e751349..d92a0203e5a9 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/cputype.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/cputype.h
@@ -75,11 +75,13 @@
 #define ARM_CPU_PART_CORTEX_A76		0xD0B
 #define ARM_CPU_PART_NEOVERSE_N1	0xD0C
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_CORTEX_A76AE	0xD0E
 #define ARM_CPU_PART_NEOVERSE_V1	0xD40
 #define ARM_CPU_PART_CORTEX_A78		0xD41
 #define ARM_CPU_PART_CORTEX_A78AE	0xD42
 #define ARM_CPU_PART_CORTEX_X1		0xD44
 #define ARM_CPU_PART_CORTEX_A510	0xD46
+#define ARM_CPU_PART_CORTEX_X1C		0xD4C
 #define ARM_CPU_PART_CORTEX_A520	0xD80
 #define ARM_CPU_PART_CORTEX_A710	0xD47
 #define ARM_CPU_PART_CORTEX_A715	0xD4D
@@ -119,6 +121,7 @@
 #define QCOM_CPU_PART_KRYO		0x200
 #define QCOM_CPU_PART_KRYO_2XX_GOLD	0x800
 #define QCOM_CPU_PART_KRYO_2XX_SILVER	0x801
+#define QCOM_CPU_PART_KRYO_3XX_GOLD	0x802
 #define QCOM_CPU_PART_KRYO_3XX_SILVER	0x803
 #define QCOM_CPU_PART_KRYO_4XX_GOLD	0x804
 #define QCOM_CPU_PART_KRYO_4XX_SILVER	0x805
@@ -129,6 +132,7 @@
 #define FUJITSU_CPU_PART_A64FX		0x001
 
 #define HISI_CPU_PART_TSV110		0xD01
+#define HISI_CPU_PART_HIP09			0xD02
 
 #define APPLE_CPU_PART_M1_ICESTORM	0x022
 #define APPLE_CPU_PART_M1_FIRESTORM	0x023
@@ -158,11 +162,13 @@
 #define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_CORTEX_A76AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76AE)
 #define MIDR_NEOVERSE_V1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V1)
 #define MIDR_CORTEX_A78	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78)
 #define MIDR_CORTEX_A78AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78AE)
 #define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
 #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
+#define MIDR_CORTEX_X1C MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1C)
 #define MIDR_CORTEX_A520 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A520)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
 #define MIDR_CORTEX_A715 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A715)
@@ -195,6 +201,7 @@
 #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
 #define MIDR_QCOM_KRYO_2XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_GOLD)
 #define MIDR_QCOM_KRYO_2XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_SILVER)
+#define MIDR_QCOM_KRYO_3XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_GOLD)
 #define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
 #define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
 #define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)
@@ -202,6 +209,7 @@
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
 #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
+#define MIDR_HISI_HIP09 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_HIP09)
 #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
 #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
 #define MIDR_APPLE_M1_ICESTORM_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM_PRO)
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/el2_setup.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/el2_setup.h
index e0ffdf13a18b..bdbe9e08664a 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/el2_setup.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/el2_setup.h
@@ -215,6 +215,30 @@
 .Lskip_fgt_\@:
 .endm
 
+.macro __init_el2_fgt2
+	mrs	x1, id_aa64mmfr0_el1
+	ubfx	x1, x1, #ID_AA64MMFR0_EL1_FGT_SHIFT, #4
+	cmp	x1, #ID_AA64MMFR0_EL1_FGT_FGT2
+	b.lt	.Lskip_fgt2_\@
+
+	mov	x0, xzr
+	mrs	x1, id_aa64dfr0_el1
+	ubfx	x1, x1, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4
+	cmp	x1, #ID_AA64DFR0_EL1_PMUVer_V3P9
+	b.lt	.Lskip_pmuv3p9_\@
+
+	orr	x0, x0, #HDFGRTR2_EL2_nPMICNTR_EL0
+	orr	x0, x0, #HDFGRTR2_EL2_nPMICFILTR_EL0
+	orr	x0, x0, #HDFGRTR2_EL2_nPMUACR_EL1
+.Lskip_pmuv3p9_\@:
+	msr_s   SYS_HDFGRTR2_EL2, x0
+	msr_s   SYS_HDFGWTR2_EL2, x0
+	msr_s   SYS_HFGRTR2_EL2, xzr
+	msr_s   SYS_HFGWTR2_EL2, xzr
+	msr_s   SYS_HFGITR2_EL2, xzr
+.Lskip_fgt2_\@:
+.endm
+
 .macro __init_el2_nvhe_prepare_eret
 	mov	x0, #INIT_PSTATE_EL1
 	msr	spsr_el2, x0
@@ -240,6 +264,7 @@
 	__init_el2_nvhe_idregs
 	__init_el2_cptr
 	__init_el2_fgt
+	__init_el2_fgt2
 .endm
 
 #ifndef __KVM_NVHE_HYPERVISOR__
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/esr.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/esr.h
index da6d2c1c0b03..5f4dc6364dbb 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/esr.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/esr.h
@@ -370,12 +370,14 @@
 /*
  * ISS values for SME traps
  */
-
-#define ESR_ELx_SME_ISS_SME_DISABLED	0
-#define ESR_ELx_SME_ISS_ILL		1
-#define ESR_ELx_SME_ISS_SM_DISABLED	2
-#define ESR_ELx_SME_ISS_ZA_DISABLED	3
-#define ESR_ELx_SME_ISS_ZT_DISABLED	4
+#define ESR_ELx_SME_ISS_SMTC_MASK		GENMASK(2, 0)
+#define ESR_ELx_SME_ISS_SMTC(esr)		((esr) & ESR_ELx_SME_ISS_SMTC_MASK)
+
+#define ESR_ELx_SME_ISS_SMTC_SME_DISABLED	0
+#define ESR_ELx_SME_ISS_SMTC_ILL		1
+#define ESR_ELx_SME_ISS_SMTC_SM_DISABLED	2
+#define ESR_ELx_SME_ISS_SMTC_ZA_DISABLED	3
+#define ESR_ELx_SME_ISS_SMTC_ZT_DISABLED	4
 
 /* ISS field definitions for MOPS exceptions */
 #define ESR_ELx_MOPS_ISS_MEM_INST	(UL(1) << 24)
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/fpsimd.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/fpsimd.h
index f2a84efc3618..c8dcb67b81a7 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/fpsimd.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/fpsimd.h
@@ -6,6 +6,7 @@
 #define __ASM_FP_H
 
 #include <asm/errno.h>
+#include <asm/percpu.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
@@ -94,6 +95,8 @@ struct cpu_fp_state {
 	enum fp_type to_save;
 };
 
+DECLARE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+
 extern void fpsimd_bind_state_to_cpu(struct cpu_fp_state *fp_state);
 
 extern void fpsimd_flush_task_state(struct task_struct *target);
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/hugetlb.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/hugetlb.h
index 293f880865e8..f0304273eb35 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/hugetlb.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/hugetlb.h
@@ -34,8 +34,8 @@ extern int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 				      unsigned long addr, pte_t *ptep,
 				      pte_t pte, int dirty);
 #define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR
-extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-				     unsigned long addr, pte_t *ptep);
+extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				     pte_t *ptep, unsigned long sz);
 #define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT
 extern void huge_ptep_set_wrprotect(struct mm_struct *mm,
 				    unsigned long addr, pte_t *ptep);
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/insn.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/insn.h
index 8c0a36f72d6f..509c874de5c7 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/insn.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/insn.h
@@ -353,6 +353,7 @@ __AARCH64_INSN_FUNCS(ldrsw_lit,	0xFF000000, 0x98000000)
 __AARCH64_INSN_FUNCS(exclusive,	0x3F800000, 0x08000000)
 __AARCH64_INSN_FUNCS(load_ex,	0x3F400000, 0x08400000)
 __AARCH64_INSN_FUNCS(store_ex,	0x3F400000, 0x08000000)
+__AARCH64_INSN_FUNCS(mops,	0x3B200C00, 0x19000400)
 __AARCH64_INSN_FUNCS(stp,	0x7FC00000, 0x29000000)
 __AARCH64_INSN_FUNCS(ldp,	0x7FC00000, 0x29400000)
 __AARCH64_INSN_FUNCS(stp_post,	0x7FC00000, 0x28800000)
@@ -692,6 +693,7 @@ u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
 }
 #endif
 u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type);
+u32 aarch64_insn_gen_dsb(enum aarch64_insn_mb_type type);
 u32 aarch64_insn_gen_mrs(enum aarch64_insn_register result,
 			 enum aarch64_insn_system_register sysreg);
 
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/kvm_host.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/kvm_host.h
index bf64fed9820e..122a1e12582c 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/kvm_host.h
@@ -74,8 +74,6 @@ enum kvm_mode kvm_get_mode(void);
 static inline enum kvm_mode kvm_get_mode(void) { return KVM_MODE_NONE; };
 #endif
 
-DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
-
 extern unsigned int __ro_after_init kvm_sve_max_vl;
 extern unsigned int __ro_after_init kvm_host_sve_max_vl;
 int __init kvm_arm_init_sve(void);
@@ -604,23 +602,13 @@ struct kvm_host_data {
 	struct kvm_cpu_context host_ctxt;
 
 	/*
-	 * All pointers in this union are hyp VA.
+	 * Hyp VA.
 	 * sve_state is only used in pKVM and if system_supports_sve().
 	 */
-	union {
-		struct user_fpsimd_state *fpsimd_state;
-		struct cpu_sve_state *sve_state;
-	};
-
-	union {
-		/* HYP VA pointer to the host storage for FPMR */
-		u64	*fpmr_ptr;
-		/*
-		 * Used by pKVM only, as it needs to provide storage
-		 * for the host
-		 */
-		u64	fpmr;
-	};
+	struct cpu_sve_state *sve_state;
+
+	/* Used by pKVM only. */
+	u64	fpmr;
 
 	/* Ownership of the FP regs */
 	enum {
@@ -699,7 +687,6 @@ struct kvm_vcpu_arch {
 	u64 hcr_el2;
 	u64 hcrx_el2;
 	u64 mdcr_el2;
-	u64 cptr_el2;
 
 	/* Exception Information */
 	struct kvm_vcpu_fault_info fault;
@@ -904,10 +891,6 @@ struct kvm_vcpu_arch {
 /* Save TRBE context if active  */
 #define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
 
-/* SVE enabled for host EL0 */
-#define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
-/* SME enabled for EL0 */
-#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
 /* Physical CPU not in supported_cpus */
 #define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(2))
 /* WFIT instruction trapped */
@@ -1245,7 +1228,7 @@ int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu,
 extern unsigned int __ro_after_init kvm_arm_vmid_bits;
 int __init kvm_arm_vmid_alloc_init(void);
 void __init kvm_arm_vmid_alloc_free(void);
-bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
+void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
 void kvm_arm_vmid_clear_active(void);
 
 static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch)
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/mman.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/mman.h
index 798d965760d4..5a280ac7570c 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/mman.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/mman.h
@@ -41,9 +41,12 @@ static inline unsigned long arch_calc_vm_flag_bits(struct file *file,
 	 * backed by tags-capable memory. The vm_flags may be overridden by a
 	 * filesystem supporting MTE (RAM-based).
 	 */
-	if (system_supports_mte() &&
-	    ((flags & MAP_ANONYMOUS) || shmem_file(file)))
-		return VM_MTE_ALLOWED;
+	if (system_supports_mte()) {
+		if ((flags & MAP_ANONYMOUS) && !(flags & MAP_HUGETLB))
+			return VM_MTE_ALLOWED;
+		if (shmem_file(file))
+			return VM_MTE_ALLOWED;
+	}
 
 	return 0;
 }
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/pgtable-hwdef.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/pgtable-hwdef.h
index fd330c1db289..a970def932aa 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/pgtable-hwdef.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/pgtable-hwdef.h
@@ -218,12 +218,6 @@
  */
 #define S1_TABLE_AP		(_AT(pmdval_t, 3) << 61)
 
-/*
- * Highest possible physical address supported.
- */
-#define PHYS_MASK_SHIFT		(CONFIG_ARM64_PA_BITS)
-#define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
-
 #define TTBR_CNP_BIT		(UL(1) << 0)
 
 /*
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/pgtable-prot.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/pgtable-prot.h
index 2a11d0c10760..3ce7c632fbfb 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/pgtable-prot.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/pgtable-prot.h
@@ -78,6 +78,7 @@ extern bool arm64_use_ng_mappings;
 #define lpa2_is_enabled()	false
 #define PTE_MAYBE_SHARED	PTE_SHARED
 #define PMD_MAYBE_SHARED	PMD_SECT_S
+#define PHYS_MASK_SHIFT		(CONFIG_ARM64_PA_BITS)
 #else
 static inline bool __pure lpa2_is_enabled(void)
 {
@@ -86,8 +87,14 @@ static inline bool __pure lpa2_is_enabled(void)
 
 #define PTE_MAYBE_SHARED	(lpa2_is_enabled() ? 0 : PTE_SHARED)
 #define PMD_MAYBE_SHARED	(lpa2_is_enabled() ? 0 : PMD_SECT_S)
+#define PHYS_MASK_SHIFT		(lpa2_is_enabled() ? CONFIG_ARM64_PA_BITS : 48)
 #endif
 
+/*
+ * Highest possible physical address supported.
+ */
+#define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
+
 /*
  * If we have userspace only BTI we don't want to mark kernel pages
  * guarded even if the system does support BTI.
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/pgtable.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/pgtable.h
index c329ea061dc9..5ba8376735cb 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/pgtable.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/pgtable.h
@@ -554,18 +554,6 @@ static inline int pmd_protnone(pmd_t pmd)
 #endif
 
 #define pmd_present(pmd)	pte_present(pmd_pte(pmd))
-
-/*
- * THP definitions.
- */
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline int pmd_trans_huge(pmd_t pmd)
-{
-	return pmd_val(pmd) && pmd_present(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_valid(pmd)		pte_valid(pmd_pte(pmd))
@@ -725,6 +713,18 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 #define pmd_leaf_size(pmd)	(pmd_cont(pmd) ? CONT_PMD_SIZE : PMD_SIZE)
 #define pte_leaf_size(pte)	(pte_cont(pte) ? CONT_PTE_SIZE : PAGE_SIZE)
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline int pmd_trans_huge(pmd_t pmd)
+{
+	/*
+	 * If pmd is present-invalid, pmd_table() won't detect it
+	 * as a table, so force the valid bit for the comparison.
+	 */
+	return pmd_val(pmd) && pmd_present(pmd) &&
+	       !pmd_table(__pmd(pmd_val(pmd) | PTE_VALID));
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
 #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
 static inline bool pud_sect(pud_t pud) { return false; }
 static inline bool pud_table(pud_t pud) { return true; }
@@ -806,7 +806,8 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
 
 #define pud_none(pud)		(!pud_val(pud))
-#define pud_bad(pud)		(!pud_table(pud))
+#define pud_bad(pud)		((pud_val(pud) & PUD_TYPE_MASK) != \
+				 PUD_TYPE_TABLE)
 #define pud_present(pud)	pte_present(pud_pte(pud))
 #ifndef __PAGETABLE_PMD_FOLDED
 #define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/sparsemem.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/sparsemem.h
index 8a8acc220371..84783efdc9d1 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/sparsemem.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/sparsemem.h
@@ -5,7 +5,10 @@
 #ifndef __ASM_SPARSEMEM_H
 #define __ASM_SPARSEMEM_H
 
-#define MAX_PHYSMEM_BITS	CONFIG_ARM64_PA_BITS
+#include <asm/pgtable-prot.h>
+
+#define MAX_PHYSMEM_BITS		PHYS_MASK_SHIFT
+#define MAX_POSSIBLE_PHYSMEM_BITS	(52)
 
 /*
  * Section size must be at least 512MB for 64K base
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/spectre.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/spectre.h
index 0c4d9045c31f..8fef12626090 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/spectre.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/spectre.h
@@ -97,7 +97,9 @@ enum mitigation_state arm64_get_meltdown_state(void);
 
 enum mitigation_state arm64_get_spectre_bhb_state(void);
 bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
-u8 spectre_bhb_loop_affected(int scope);
+extern bool __nospectre_bhb;
+u8 get_spectre_bhb_loop_value(void);
+bool is_spectre_bhb_fw_mitigated(void);
 void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
 bool try_emulate_el1_ssbs(struct pt_regs *regs, u32 instr);
 
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/tlbflush.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/tlbflush.h
index 95fbc8c05607..5f12cdc2b967 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/tlbflush.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/tlbflush.h
@@ -330,13 +330,14 @@ static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *b
 }
 
 /*
- * If mprotect/munmap/etc occurs during TLB batched flushing, we need to
- * synchronise all the TLBI issued with a DSB to avoid the race mentioned in
- * flush_tlb_batched_pending().
+ * If mprotect/munmap/etc occurs during TLB batched flushing, we need to ensure
+ * all the previously issued TLBIs targeting mm have completed. But since we
+ * can be executing on a remote CPU, a DSB cannot guarantee this like it can
+ * for arch_tlbbatch_flush(). Our only option is to flush the entire mm.
  */
 static inline void arch_flush_tlb_batched_pending(struct mm_struct *mm)
 {
-	dsb(ish);
+	flush_tlb_mm(mm);
 }
 
 /*
@@ -396,33 +397,35 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
 #define __flush_tlb_range_op(op, start, pages, stride,			\
 				asid, tlb_level, tlbi_user, lpa2)	\
 do {									\
+	typeof(start) __flush_start = start;				\
+	typeof(pages) __flush_pages = pages;				\
 	int num = 0;							\
 	int scale = 3;							\
 	int shift = lpa2 ? 16 : PAGE_SHIFT;				\
 	unsigned long addr;						\
 									\
-	while (pages > 0) {						\
+	while (__flush_pages > 0) {					\
 		if (!system_supports_tlb_range() ||			\
-		    pages == 1 ||					\
-		    (lpa2 && start != ALIGN(start, SZ_64K))) {		\
-			addr = __TLBI_VADDR(start, asid);		\
+		    __flush_pages == 1 ||				\
+		    (lpa2 && __flush_start != ALIGN(__flush_start, SZ_64K))) {	\
+			addr = __TLBI_VADDR(__flush_start, asid);	\
 			__tlbi_level(op, addr, tlb_level);		\
 			if (tlbi_user)					\
 				__tlbi_user_level(op, addr, tlb_level);	\
-			start += stride;				\
-			pages -= stride >> PAGE_SHIFT;			\
+			__flush_start += stride;			\
+			__flush_pages -= stride >> PAGE_SHIFT;		\
 			continue;					\
 		}							\
 									\
-		num = __TLBI_RANGE_NUM(pages, scale);			\
+		num = __TLBI_RANGE_NUM(__flush_pages, scale);		\
 		if (num >= 0) {						\
-			addr = __TLBI_VADDR_RANGE(start >> shift, asid, \
+			addr = __TLBI_VADDR_RANGE(__flush_start >> shift, asid, \
 						scale, num, tlb_level);	\
 			__tlbi(r##op, addr);				\
 			if (tlbi_user)					\
 				__tlbi_user(r##op, addr);		\
-			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
-			pages -= __TLBI_RANGE_PAGES(num, scale);	\
+			__flush_start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
+			__flush_pages -= __TLBI_RANGE_PAGES(num, scale);\
 		}							\
 		scale--;						\
 	}								\
diff --git linux-libre-6.12-gnu/arch/arm64/include/asm/traps.h linux-libre-6.12.38-gnu/arch/arm64/include/asm/traps.h
index d780d1bd2eac..82cf1f879c61 100644
--- linux-libre-6.12-gnu/arch/arm64/include/asm/traps.h
+++ linux-libre-6.12.38-gnu/arch/arm64/include/asm/traps.h
@@ -109,10 +109,9 @@ static inline void arm64_mops_reset_regs(struct user_pt_regs *regs, unsigned lon
 	int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr);
 	int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr);
 	int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr);
-	unsigned long dst, src, size;
+	unsigned long dst, size;
 
 	dst = regs->regs[dstreg];
-	src = regs->regs[srcreg];
 	size = regs->regs[sizereg];
 
 	/*
@@ -129,6 +128,7 @@ static inline void arm64_mops_reset_regs(struct user_pt_regs *regs, unsigned lon
 		}
 	} else {
 		/* CPY* instruction */
+		unsigned long src = regs->regs[srcreg];
 		if (!(option_a ^ wrong_option)) {
 			/* Format is from Option B */
 			if (regs->pstate & PSR_N_BIT) {
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/cacheinfo.c linux-libre-6.12.38-gnu/arch/arm64/kernel/cacheinfo.c
index d9c9218fa1fd..309942b06c5b 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/cacheinfo.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/cacheinfo.c
@@ -101,16 +101,18 @@ int populate_cache_leaves(unsigned int cpu)
 	unsigned int level, idx;
 	enum cache_type type;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
-	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+	struct cacheinfo *infos = this_cpu_ci->info_list;
 
 	for (idx = 0, level = 1; level <= this_cpu_ci->num_levels &&
-	     idx < this_cpu_ci->num_leaves; idx++, level++) {
+	     idx < this_cpu_ci->num_leaves; level++) {
 		type = get_cache_type(level);
 		if (type == CACHE_TYPE_SEPARATE) {
-			ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
-			ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
+			if (idx + 1 >= this_cpu_ci->num_leaves)
+				break;
+			ci_leaf_init(&infos[idx++], CACHE_TYPE_DATA, level);
+			ci_leaf_init(&infos[idx++], CACHE_TYPE_INST, level);
 		} else {
-			ci_leaf_init(this_leaf++, type, level);
+			ci_leaf_init(&infos[idx++], type, level);
 		}
 	}
 	return 0;
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/compat_alignment.c linux-libre-6.12.38-gnu/arch/arm64/kernel/compat_alignment.c
index deff21bfa680..b68e1d328d4c 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/compat_alignment.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/compat_alignment.c
@@ -368,6 +368,8 @@ int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs)
 		return 1;
 	}
 
+	if (!handler)
+		return 1;
 	type = handler(addr, instr, regs);
 
 	if (type == TYPE_ERROR || type == TYPE_FAULT)
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/cpufeature.c linux-libre-6.12.38-gnu/arch/arm64/kernel/cpufeature.c
index 718728a85430..05ccf4ec278f 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/cpufeature.c
@@ -111,7 +111,14 @@ static struct arm64_cpu_capabilities const __ro_after_init *cpucap_ptrs[ARM64_NC
 
 DECLARE_BITMAP(boot_cpucaps, ARM64_NCAPS);
 
-bool arm64_use_ng_mappings = false;
+/*
+ * arm64_use_ng_mappings must be placed in the .data section, otherwise it
+ * ends up in the .bss section where it is initialized in early_map_kernel()
+ * after the MMU (with the idmap) was enabled. create_init_idmap() - which
+ * runs before early_map_kernel() and reads the variable via PTE_MAYBE_NG -
+ * may end up generating an incorrect idmap page table attributes.
+ */
+bool arm64_use_ng_mappings __read_mostly = false;
 EXPORT_SYMBOL(arm64_use_ng_mappings);
 
 DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors;
@@ -228,6 +235,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_XS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_I8MM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_DGH_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, 0),
@@ -1152,12 +1160,6 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
 		unsigned long cpacr = cpacr_save_enable_kernel_sme();
 
-		/*
-		 * We mask out SMPS since even if the hardware
-		 * supports priorities the kernel does not at present
-		 * and we block access to them.
-		 */
-		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
 		vec_init_vq_map(ARM64_VEC_SME);
 
 		cpacr_restore(cpacr);
@@ -1405,13 +1407,6 @@ void update_cpu_features(int cpu,
 	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
 		unsigned long cpacr = cpacr_save_enable_kernel_sme();
 
-		/*
-		 * We mask out SMPS since even if the hardware
-		 * supports priorities the kernel does not at present
-		 * and we block access to them.
-		 */
-		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
-
 		/* Probe vector lengths */
 		if (!system_capabilities_finalized())
 			vec_update_vq_map(ARM64_VEC_SME);
@@ -2922,6 +2917,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = match,						\
 	}
 
+#define HWCAP_CAP_MATCH_ID(match, reg, field, min_value, cap_type, cap)		\
+	{									\
+		__HWCAP_CAP(#cap, cap_type, cap)				\
+		HWCAP_CPUID_MATCH(reg, field, min_value) 			\
+		.matches = match,						\
+	}
+
 #ifdef CONFIG_ARM64_PTR_AUTH
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
 	{
@@ -2950,6 +2952,13 @@ static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = {
 };
 #endif
 
+#ifdef CONFIG_ARM64_SVE
+static bool has_sve_feature(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	return system_supports_sve() && has_user_cpuid_feature(cap, scope);
+}
+#endif
+
 static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, PMULL, CAP_HWCAP, KERNEL_HWCAP_PMULL),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, AES, CAP_HWCAP, KERNEL_HWCAP_AES),
@@ -2992,19 +3001,19 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64MMFR2_EL1, AT, IMP, CAP_HWCAP, KERNEL_HWCAP_USCAT),
 #ifdef CONFIG_ARM64_SVE
 	HWCAP_CAP(ID_AA64PFR0_EL1, SVE, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_B16B16),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SVEver, SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SVEver, SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_B16B16),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
 #endif
 	HWCAP_CAP(ID_AA64PFR1_EL1, SSBS, SSBS2, CAP_HWCAP, KERNEL_HWCAP_SSBS),
 #ifdef CONFIG_ARM64_BTI
@@ -3375,7 +3384,7 @@ static void verify_hyp_capabilities(void)
 		return;
 
 	safe_mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
-	mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
 
 	/* Verify VMID bits */
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/cpuinfo.c linux-libre-6.12.38-gnu/arch/arm64/kernel/cpuinfo.c
index 44718d0482b3..aec5e3947c78 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/cpuinfo.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/cpuinfo.c
@@ -478,6 +478,16 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
 		__cpuinfo_store_cpu_32bit(&info->aarch32);
 
+	if (IS_ENABLED(CONFIG_ARM64_SME) &&
+	    id_aa64pfr1_sme(info->reg_id_aa64pfr1)) {
+		/*
+		 * We mask out SMPS since even if the hardware
+		 * supports priorities the kernel does not at present
+		 * and we block access to them.
+		 */
+		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
+	}
+
 	cpuinfo_detect_icache_policy(info);
 }
 
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/entry-common.c linux-libre-6.12.38-gnu/arch/arm64/kernel/entry-common.c
index 3fcd9d080bf2..d23315ef7b67 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/entry-common.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/entry-common.c
@@ -393,20 +393,16 @@ static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
  * As per the ABI exit SME streaming mode and clear the SVE state not
  * shared with FPSIMD on syscall entry.
  */
-static inline void fp_user_discard(void)
+static inline void fpsimd_syscall_enter(void)
 {
-	/*
-	 * If SME is active then exit streaming mode.  If ZA is active
-	 * then flush the SVE registers but leave userspace access to
-	 * both SVE and SME enabled, otherwise disable SME for the
-	 * task and fall through to disabling SVE too.  This means
-	 * that after a syscall we never have any streaming mode
-	 * register state to track, if this changes the KVM code will
-	 * need updating.
-	 */
+	/* Ensure PSTATE.SM is clear, but leave PSTATE.ZA as-is. */
 	if (system_supports_sme())
 		sme_smstop_sm();
 
+	/*
+	 * The CPU is not in streaming mode. If non-streaming SVE is not
+	 * supported, there is no SVE state that needs to be discarded.
+	 */
 	if (!system_supports_sve())
 		return;
 
@@ -416,6 +412,33 @@ static inline void fp_user_discard(void)
 		sve_vq_minus_one = sve_vq_from_vl(task_get_sve_vl(current)) - 1;
 		sve_flush_live(true, sve_vq_minus_one);
 	}
+
+	/*
+	 * Any live non-FPSIMD SVE state has been zeroed. Allow
+	 * fpsimd_save_user_state() to lazily discard SVE state until either
+	 * the live state is unbound or fpsimd_syscall_exit() is called.
+	 */
+	__this_cpu_write(fpsimd_last_state.to_save, FP_STATE_FPSIMD);
+}
+
+static __always_inline void fpsimd_syscall_exit(void)
+{
+	if (!system_supports_sve())
+		return;
+
+	/*
+	 * The current task's user FPSIMD/SVE/SME state is now bound to this
+	 * CPU. The fpsimd_last_state.to_save value is either:
+	 *
+	 * - FP_STATE_FPSIMD, if the state has not been reloaded on this CPU
+	 *   since fpsimd_syscall_enter().
+	 *
+	 * - FP_STATE_CURRENT, if the state has been reloaded on this CPU at
+	 *   any point.
+	 *
+	 * Reset this to FP_STATE_CURRENT to stop lazy discarding.
+	 */
+	__this_cpu_write(fpsimd_last_state.to_save, FP_STATE_CURRENT);
 }
 
 UNHANDLED(el1t, 64, sync)
@@ -707,10 +730,11 @@ static void noinstr el0_svc(struct pt_regs *regs)
 {
 	enter_from_user_mode(regs);
 	cortex_a76_erratum_1463225_svc_handler();
-	fp_user_discard();
+	fpsimd_syscall_enter();
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_svc(regs);
 	exit_to_user_mode(regs);
+	fpsimd_syscall_exit();
 }
 
 static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/fpsimd.c linux-libre-6.12.38-gnu/arch/arm64/kernel/fpsimd.c
index 6d21971ae559..8854bce5cfe2 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/fpsimd.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/fpsimd.c
@@ -119,7 +119,7 @@
  *   whatever is in the FPSIMD registers is not saved to memory, but discarded.
  */
 
-static DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
 
 __ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = {
 #ifdef CONFIG_ARM64_SVE
@@ -359,9 +359,6 @@ static void task_fpsimd_load(void)
 	WARN_ON(preemptible());
 	WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE));
 
-	if (system_supports_fpmr())
-		write_sysreg_s(current->thread.uw.fpmr, SYS_FPMR);
-
 	if (system_supports_sve() || system_supports_sme()) {
 		switch (current->thread.fp_type) {
 		case FP_STATE_FPSIMD:
@@ -413,6 +410,9 @@ static void task_fpsimd_load(void)
 			restore_ffr = system_supports_fa64();
 	}
 
+	if (system_supports_fpmr())
+		write_sysreg_s(current->thread.uw.fpmr, SYS_FPMR);
+
 	if (restore_sve_regs) {
 		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_SVE);
 		sve_load_state(sve_pffr(&current->thread),
@@ -453,12 +453,15 @@ static void fpsimd_save_user_state(void)
 		*(last->fpmr) = read_sysreg_s(SYS_FPMR);
 
 	/*
-	 * If a task is in a syscall the ABI allows us to only
-	 * preserve the state shared with FPSIMD so don't bother
-	 * saving the full SVE state in that case.
+	 * Save SVE state if it is live.
+	 *
+	 * The syscall ABI discards live SVE state at syscall entry. When
+	 * entering a syscall, fpsimd_syscall_enter() sets to_save to
+	 * FP_STATE_FPSIMD to allow the SVE state to be lazily discarded until
+	 * either new SVE state is loaded+bound or fpsimd_syscall_exit() is
+	 * called prior to a return to userspace.
 	 */
-	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE) &&
-	     !in_syscall(current_pt_regs())) ||
+	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE)) ||
 	    last->to_save == FP_STATE_SVE) {
 		save_sve_regs = true;
 		save_ffr = true;
@@ -651,7 +654,7 @@ static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst,
  * task->thread.uw.fpsimd_state must be up to date before calling this
  * function.
  */
-static void fpsimd_to_sve(struct task_struct *task)
+static inline void fpsimd_to_sve(struct task_struct *task)
 {
 	unsigned int vq;
 	void *sst = task->thread.sve_state;
@@ -675,7 +678,7 @@ static void fpsimd_to_sve(struct task_struct *task)
  * bytes of allocated kernel memory.
  * task->thread.sve_state must be up to date before calling this function.
  */
-static void sve_to_fpsimd(struct task_struct *task)
+static inline void sve_to_fpsimd(struct task_struct *task)
 {
 	unsigned int vq, vl;
 	void const *sst = task->thread.sve_state;
@@ -1436,7 +1439,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 	 * If this not a trap due to SME being disabled then something
 	 * is being used in the wrong mode, report as SIGILL.
 	 */
-	if (ESR_ELx_ISS(esr) != ESR_ELx_SME_ISS_SME_DISABLED) {
+	if (ESR_ELx_SME_ISS_SMTC(esr) != ESR_ELx_SME_ISS_SMTC_SME_DISABLED) {
 		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
 		return;
 	}
@@ -1460,6 +1463,8 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 		sme_set_vq(vq_minus_one);
 
 		fpsimd_bind_task_to_cpu();
+	} else {
+		fpsimd_flush_task_state(current);
 	}
 
 	put_cpu_fpsimd_context();
@@ -1573,8 +1578,8 @@ void fpsimd_thread_switch(struct task_struct *next)
 		fpsimd_save_user_state();
 
 	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
-		fpsimd_load_kernel_state(next);
 		fpsimd_flush_cpu_state();
+		fpsimd_load_kernel_state(next);
 	} else {
 		/*
 		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
@@ -1661,6 +1666,9 @@ void fpsimd_flush_thread(void)
 		current->thread.svcr = 0;
 	}
 
+	if (system_supports_fpmr())
+		current->thread.uw.fpmr = 0;
+
 	current->thread.fp_type = FP_STATE_FPSIMD;
 
 	put_cpu_fpsimd_context();
@@ -1694,31 +1702,6 @@ void fpsimd_signal_preserve_current_state(void)
 		sve_to_fpsimd(current);
 }
 
-/*
- * Called by KVM when entering the guest.
- */
-void fpsimd_kvm_prepare(void)
-{
-	if (!system_supports_sve())
-		return;
-
-	/*
-	 * KVM does not save host SVE state since we can only enter
-	 * the guest from a syscall so the ABI means that only the
-	 * non-saved SVE state needs to be saved.  If we have left
-	 * SVE enabled for performance reasons then update the task
-	 * state to be FPSIMD only.
-	 */
-	get_cpu_fpsimd_context();
-
-	if (test_and_clear_thread_flag(TIF_SVE)) {
-		sve_to_fpsimd(current);
-		current->thread.fp_type = FP_STATE_FPSIMD;
-	}
-
-	put_cpu_fpsimd_context();
-}
-
 /*
  * Associate current's FPSIMD context with this cpu
  * The caller must have ownership of the cpu FPSIMD context before calling
@@ -1826,7 +1809,7 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state)
 	get_cpu_fpsimd_context();
 
 	current->thread.uw.fpsimd_state = *state;
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		fpsimd_to_sve(current);
 
 	task_fpsimd_load();
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/pi/idreg-override.c linux-libre-6.12.38-gnu/arch/arm64/kernel/pi/idreg-override.c
index 29d4b6244a6f..5c03f5e0d352 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/pi/idreg-override.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/pi/idreg-override.c
@@ -74,6 +74,15 @@ static bool __init mmfr2_varange_filter(u64 val)
 		id_aa64mmfr0_override.val |=
 			(ID_AA64MMFR0_EL1_TGRAN_LPA2 - 1) << ID_AA64MMFR0_EL1_TGRAN_SHIFT;
 		id_aa64mmfr0_override.mask |= 0xfU << ID_AA64MMFR0_EL1_TGRAN_SHIFT;
+
+		/*
+		 * Override PARange to 48 bits - the override will just be
+		 * ignored if the actual PARange is smaller, but this is
+		 * unlikely to be the case for LPA2 capable silicon.
+		 */
+		id_aa64mmfr0_override.val |=
+			ID_AA64MMFR0_EL1_PARANGE_48 << ID_AA64MMFR0_EL1_PARANGE_SHIFT;
+		id_aa64mmfr0_override.mask |= 0xfU << ID_AA64MMFR0_EL1_PARANGE_SHIFT;
 	}
 #endif
 	return true;
diff --git linux-libre-6.12-gnu/arch/arm64/kernel/pi/map_kernel.c linux-libre-6.12.38-gnu/arch/arm64/kernel/pi/map_kernel.c
index f374a3e5a5fe..e57b043f324b 100644
--- linux-libre-6.12-gnu/arch/arm64/kernel/pi/map_kernel.c
+++ linux-libre-6.12.38-gnu/arch/arm64/kernel/pi/map_kernel.c
@@ -136,6 +136,12 @@ static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(u64 ttbr)
 {
 	u64 s