diff --git linux-libre-6.8-gnu/.get_maintainer.ignore linux-libre-6.9-rc6-gnu/.get_maintainer.ignore
index c298bab3d320..7d1b30aae874 100644
--- linux-libre-6.8-gnu/.get_maintainer.ignore
+++ linux-libre-6.9-rc6-gnu/.get_maintainer.ignore
@@ -1,4 +1,5 @@
 Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
 Christoph Hellwig <hch@lst.de>
+Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 Marc Gonzalez <marc.w.gonzalez@free.fr>
diff --git linux-libre-6.8-gnu/.gitignore linux-libre-6.9-rc6-gnu/.gitignore
index 689a4fa3f547..c59dc60ba62e 100644
--- linux-libre-6.8-gnu/.gitignore
+++ linux-libre-6.9-rc6-gnu/.gitignore
@@ -52,6 +52,7 @@
 *.xz
 *.zst
 Module.symvers
+dtbs-list
 modules.order
 
 #
diff --git linux-libre-6.8-gnu/.mailmap linux-libre-6.9-rc6-gnu/.mailmap
index bd9f1025ac44..16b704e1d5d3 100644
--- linux-libre-6.8-gnu/.mailmap
+++ linux-libre-6.9-rc6-gnu/.mailmap
@@ -20,6 +20,7 @@ Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
 Adriana Reus <adi.reus@gmail.com> <adriana.reus@intel.com>
 Adrian Bunk <bunk@stusta.de>
+Ajay Kaher <ajay.kaher@broadcom.com> <akaher@vmware.com>
 Akhil P Oommen <quic_akhilpo@quicinc.com> <akhilpo@codeaurora.org>
 Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
@@ -36,6 +37,17 @@ Alexei Avshalom Lazar <quic_ailizaro@quicinc.com> <ailizaro@codeaurora.org>
 Alexei Starovoitov <ast@kernel.org> <alexei.starovoitov@gmail.com>
 Alexei Starovoitov <ast@kernel.org> <ast@fb.com>
 Alexei Starovoitov <ast@kernel.org> <ast@plumgrid.com>
+Alexey Makhalov <alexey.amakhalov@broadcom.com> <amakhalov@vmware.com>
+Alex Elder <elder@kernel.org>
+Alex Elder <elder@kernel.org> <aelder@sgi.com>
+Alex Elder <elder@kernel.org> <alex.elder@linaro.org>
+Alex Elder <elder@kernel.org> <alex.elder@linary.org>
+Alex Elder <elder@kernel.org> <elder@dreamhost.com>
+Alex Elder <elder@kernel.org> <elder@dreawmhost.com>
+Alex Elder <elder@kernel.org> <elder@ieee.org>
+Alex Elder <elder@kernel.org> <elder@inktank.com>
+Alex Elder <elder@kernel.org> <elder@linaro.org>
+Alex Elder <elder@kernel.org> <elder@newdream.net>
 Alex Hung <alexhung@gmail.com> <alex.hung@canonical.com>
 Alex Shi <alexs@kernel.org> <alex.shi@intel.com>
 Alex Shi <alexs@kernel.org> <alex.shi@linaro.org>
@@ -96,6 +108,8 @@ Ben Widawsky <bwidawsk@kernel.org> <ben@bwidawsk.net>
 Ben Widawsky <bwidawsk@kernel.org> <ben.widawsky@intel.com>
 Ben Widawsky <bwidawsk@kernel.org> <benjamin.widawsky@intel.com>
 Benjamin Poirier <benjamin.poirier@gmail.com> <bpoirier@suse.de>
+Benjamin Tissoires <bentiss@kernel.org> <benjamin.tissoires@gmail.com>
+Benjamin Tissoires <bentiss@kernel.org> <benjamin.tissoires@redhat.com>
 Bjorn Andersson <andersson@kernel.org> <bjorn@kryo.se>
 Bjorn Andersson <andersson@kernel.org> <bjorn.andersson@linaro.org>
 Bjorn Andersson <andersson@kernel.org> <bjorn.andersson@sonymobile.com>
@@ -110,6 +124,7 @@ Brendan Higgins <brendan.higgins@linux.dev> <brendanhiggins@google.com>
 Brian Avery <b.avery@hp.com>
 Brian King <brking@us.ibm.com>
 Brian Silverman <bsilver16384@gmail.com> <brian.silverman@bluerivertech.com>
+Bryan Tan <bryan-bt.tan@broadcom.com> <bryantan@vmware.com>
 Cai Huoqing <cai.huoqing@linux.dev> <caihuoqing@baidu.com>
 Can Guo <quic_cang@quicinc.com> <cang@codeaurora.org>
 Carl Huang <quic_cjhuang@quicinc.com> <cjhuang@codeaurora.org>
@@ -340,7 +355,8 @@ Lee Jones <lee@kernel.org> <joneslee@google.com>
 Lee Jones <lee@kernel.org> <lee.jones@canonical.com>
 Lee Jones <lee@kernel.org> <lee.jones@linaro.org>
 Lee Jones <lee@kernel.org> <lee@ubuntu.com>
-Leonard Crestez <leonard.crestez@nxp.com> Leonard Crestez <cdleonard@gmail.com>
+Leonard Crestez <cdleonard@gmail.com> <leonard.crestez@nxp.com>
+Leonard Crestez <cdleonard@gmail.com> <leonard.crestez@intel.com>
 Leonardo Bras <leobras.c@gmail.com> <leonardo@linux.ibm.com>
 Leonard Göhrs <l.goehrs@pengutronix.de>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
@@ -439,8 +455,11 @@ Mukesh Ojha <quic_mojha@quicinc.com> <mojha@codeaurora.org>
 Muna Sinada <quic_msinada@quicinc.com> <msinada@codeaurora.org>
 Murali Nalajala <quic_mnalajal@quicinc.com> <mnalajal@codeaurora.org>
 Mythri P K <mythripk@ti.com>
+Nadav Amit <nadav.amit@gmail.com> <namit@vmware.com>
+Nadav Amit <nadav.amit@gmail.com> <namit@cs.technion.ac.il>
 Nadia Yvette Chambers <nyc@holomorphy.com> William Lee Irwin III <wli@holomorphy.com>
-Naoya Horiguchi <naoya.horiguchi@nec.com> <n-horiguchi@ah.jp.nec.com>
+Naoya Horiguchi <nao.horiguchi@gmail.com> <n-horiguchi@ah.jp.nec.com>
+Naoya Horiguchi <nao.horiguchi@gmail.com> <naoya.horiguchi@nec.com>
 Nathan Chancellor <nathan@kernel.org> <natechancellor@gmail.com>
 Neeraj Upadhyay <quic_neeraju@quicinc.com> <neeraju@codeaurora.org>
 Neil Armstrong <neil.armstrong@linaro.org> <narmstrong@baylibre.com>
@@ -495,7 +514,8 @@ Prasad Sodagudi <quic_psodagud@quicinc.com> <psodagud@codeaurora.org>
 Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
 Qais Yousef <qyousef@layalina.io> <qais.yousef@imgtec.com>
 Qais Yousef <qyousef@layalina.io> <qais.yousef@arm.com>
-Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
+Quentin Monnet <qmo@kernel.org> <quentin.monnet@netronome.com>
+Quentin Monnet <qmo@kernel.org> <quentin@isovalent.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
 Rajeev Nandan <quic_rajeevny@quicinc.com> <rajeevny@codeaurora.org>
@@ -517,6 +537,7 @@ Rémi Denis-Courmont <rdenis@simphalempin.com>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo@ribalda.com>
 Ricardo Ribalda <ribalda@kernel.org> Ricardo Ribalda Delgado <ribalda@kernel.org>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo.ribalda@gmail.com>
+Richard Genoud <richard.genoud@bootlin.com> <richard.genoud@gmail.com>
 Richard Leitner <richard.leitner@linux.dev> <dev@g0hl1n.net>
 Richard Leitner <richard.leitner@linux.dev> <me@g0hl1n.net>
 Richard Leitner <richard.leitner@linux.dev> <richard.leitner@skidata.com>
@@ -525,6 +546,7 @@ Rocky Liao <quic_rjliao@quicinc.com> <rjliao@codeaurora.org>
 Roman Gushchin <roman.gushchin@linux.dev> <guro@fb.com>
 Roman Gushchin <roman.gushchin@linux.dev> <guroan@gmail.com>
 Roman Gushchin <roman.gushchin@linux.dev> <klamm@yandex-team.ru>
+Ronak Doshi <ronak.doshi@broadcom.com> <doshir@vmware.com>
 Muchun Song <muchun.song@linux.dev> <songmuchun@bytedance.com>
 Muchun Song <muchun.song@linux.dev> <smuchun@gmail.com>
 Ross Zwisler <zwisler@kernel.org> <ross.zwisler@linux.intel.com>
@@ -573,6 +595,7 @@ Simon Kelley <simon@thekelleys.org.uk>
 Sricharan Ramabadhran <quic_srichara@quicinc.com> <sricharan@codeaurora.org>
 Srinivas Ramana <quic_sramana@quicinc.com> <sramana@codeaurora.org>
 Sriram R <quic_srirrama@quicinc.com> <srirrama@codeaurora.org>
+Stefan Wahren <wahrenst@gmx.net> <stefan.wahren@i2se.com>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <stephen@networkplumber.org> <shemminger@linux-foundation.org>
 Stephen Hemminger <stephen@networkplumber.org> <shemminger@osdl.org>
@@ -646,6 +669,7 @@ Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <viresh.kumar@linaro.org> <viresh.kumar@linaro.org>
 Viresh Kumar <viresh.kumar@linaro.org> <viresh.kumar@linaro.com>
+Vishnu Dasa <vishnu.dasa@broadcom.com> <vdasa@vmware.com>
 Vivek Aknurwar <quic_viveka@quicinc.com> <viveka@codeaurora.org>
 Vivien Didelot <vivien.didelot@gmail.com> <vivien.didelot@savoirfairelinux.com>
 Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
diff --git linux-libre-6.8-gnu/CREDITS linux-libre-6.9-rc6-gnu/CREDITS
index df8d6946739f..0107047f807b 100644
--- linux-libre-6.8-gnu/CREDITS
+++ linux-libre-6.9-rc6-gnu/CREDITS
@@ -63,6 +63,11 @@ D: dosfs, LILO, some fd features, ATM, various other hacks here and there
 S: Buenos Aires
 S: Argentina
 
+NTFS FILESYSTEM
+N: Anton Altaparmakov
+E: anton@tuxera.com
+D: NTFS filesystem
+
 N: Tim Alpaerts
 E: tim_alpaerts@toyota-motor-europe.com
 D: 802.2 class II logical link control layer,
@@ -2955,6 +2960,11 @@ S: 2364 Old Trail Drive
 S: Reston, Virginia 20191
 S: USA
 
+N: Sekhar Nori
+E: nori.sekhar@gmail.com
+D: Maintainer of Texas Instruments DaVinci machine support, contributor
+D: to device drivers relevant to that SoC family.
+
 N: Fredrik Noring
 E: noring@nocrew.org
 W: http://www.lysator.liu.se/~noring/
@@ -3136,6 +3146,10 @@ S: Triftstra=DFe 55
 S: 13353 Berlin
 S: Germany
 
+N: Gustavo Pimental
+E: gustavo.pimentel@synopsys.com
+D: PCI driver for Synopsys DesignWare
+
 N: Emanuel Pirker
 E: epirker@edu.uni-klu.ac.at
 D: AIC5800 IEEE 1394, RAW I/O on 1394
diff --git linux-libre-6.8-gnu/Documentation/ABI/obsolete/sysfs-gpio linux-libre-6.9-rc6-gnu/Documentation/ABI/obsolete/sysfs-gpio
index b8b0fd341c17..da1345d854b4 100644
--- linux-libre-6.8-gnu/Documentation/ABI/obsolete/sysfs-gpio
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/obsolete/sysfs-gpio
@@ -28,5 +28,5 @@ Description:
 	    /label ... (r/o) descriptive, not necessarily unique
 	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
 
-  This ABI is deprecated and will be removed after 2020. It is
-  replaced with the GPIO character device.
+  This ABI is obsoleted by Documentation/ABI/testing/gpio-cdev and will be
+  removed after 2020.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/configfs-usb-gadget-ffs linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/configfs-usb-gadget-ffs
index e39b27653c65..bf8936ff6d38 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/configfs-usb-gadget-ffs
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/configfs-usb-gadget-ffs
@@ -4,6 +4,14 @@ KernelVersion:	3.13
 Description:	The purpose of this directory is to create and remove it.
 
 		A corresponding USB function instance is created/removed.
-		There are no attributes here.
 
-		All parameters are set through FunctionFS.
+		All attributes are read only:
+
+		=============	============================================
+		ready		1 if the function is ready to be used, E.G.
+				if userspace has written descriptors and
+				strings to ep0, so the gadget can be
+				enabled - 0 otherwise.
+		=============	============================================
+
+		All other parameters are set through FunctionFS.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-cxl linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-cxl
index fe61d372e3fa..c61f9b813973 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-cxl
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-cxl
@@ -33,3 +33,37 @@ Description:
 		device cannot clear poison from the address, -ENXIO is returned.
 		The clear_poison attribute is only visible for devices
 		supporting the capability.
+
+What:		/sys/kernel/debug/cxl/einj_types
+Date:		January, 2024
+KernelVersion:	v6.9
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) Prints the CXL protocol error types made available by
+		the platform in the format:
+
+			0x<error number> <error type>
+
+		The possible error types are (as of ACPI v6.5):
+
+			0x1000	CXL.cache Protocol Correctable
+			0x2000	CXL.cache Protocol Uncorrectable non-fatal
+			0x4000	CXL.cache Protocol Uncorrectable fatal
+			0x8000	CXL.mem Protocol Correctable
+			0x10000	CXL.mem Protocol Uncorrectable non-fatal
+			0x20000	CXL.mem Protocol Uncorrectable fatal
+
+		The <error number> can be written to einj_inject to inject
+		<error type> into a chosen dport.
+
+What:		/sys/kernel/debug/cxl/$dport_dev/einj_inject
+Date:		January, 2024
+KernelVersion:	v6.9
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) Writing an integer to this file injects the corresponding
+		CXL protocol error into $dport_dev ($dport_dev will be a device
+		name from /sys/bus/pci/devices). The integer to type mapping for
+		injection can be found by reading from einj_types. If the dport
+		was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise
+		a CXL 2.0 error is injected.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-driver-qat linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-driver-qat
index b2db010d851e..bd6793760f29 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-driver-qat
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-driver-qat
@@ -81,3 +81,29 @@ Description:	(RO) Read returns, for each Acceleration Engine (AE), the number
 			<N>: Number of Compress and Verify (CnV) errors and type
 			     of the last CnV error detected by Acceleration
 			     Engine N.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/inject_error
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(WO) Write to inject an error that simulates an heartbeat
+		failure. This is to be used for testing purposes.
+
+		After writing this file, the driver stops arbitration on a
+		random engine and disables the fetching of heartbeat counters.
+		If a workload is running on the device, a job submitted to the
+		accelerator might not get a response and a read of the
+		`heartbeat/status` attribute might report -1, i.e. device
+		unresponsive.
+		The error is unrecoverable thus the device must be restarted to
+		restore its functionality.
+
+		This attribute is available only when the kernel is built with
+		CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION=y.
+
+		A write of 1 enables error injection.
+
+		The following example shows how to enable error injection::
+
+			# cd /sys/kernel/debug/qat_<device>_<BDF>
+			# echo 1 > heartbeat/inject_error
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-hpre linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-hisi-hpre
index 8e8de49c5cc6..d4e16ef9ac9a 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-hpre
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-hisi-hpre
@@ -111,6 +111,28 @@ Description:	QM debug registers(regs) read hardware register value. This
 		node is used to show the change of the qm register values. This
 		node can be help users to check the change of register values.
 
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_state
+Date:		Jan 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the state of the device.
+		0: busy, 1: idle.
+		Only available for PF, and take no other effect on HPRE.
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the wait time when stop queue fails. Available for both PF
+		and VF, and take no other effect on HPRE.
+		0: not wait(default), others value: wait dev_timeout * 20 microsecond.
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the stop queue status of the QM. The default value is 0,
+		if dev_timeout is set, when stop queue fails, the dev_state
+		will return non-zero value. Available for both PF and VF,
+		and take no other effect on HPRE.
+
 What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs
 Date:		Mar 2022
 Contact:	linux-crypto@vger.kernel.org
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-sec linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-hisi-sec
index deeefe2c735e..6c6c9a6e150a 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-sec
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-hisi-sec
@@ -91,6 +91,28 @@ Description:	QM debug registers(regs) read hardware register value. This
 		node is used to show the change of the qm register values. This
 		node can be help users to check the change of register values.
 
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_state
+Date:		Jan 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the state of the device.
+		0: busy, 1: idle.
+		Only available for PF, and take no other effect on SEC.
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_timeout
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the wait time when stop queue fails. Available for both PF
+		and VF, and take no other effect on SEC.
+		0: not wait(default), others value: wait dev_timeout * 20 microsecond.
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_state
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the stop queue status of the QM. The default value is 0,
+		if dev_timeout is set, when stop queue fails, the dev_state
+		will return non-zero value. Available for both PF and VF,
+		and take no other effect on SEC.
+
 What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs
 Date:		Mar 2022
 Contact:	linux-crypto@vger.kernel.org
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-zip linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-hisi-zip
index 593714afaed2..a22dd6942219 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-hisi-zip
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-hisi-zip
@@ -104,6 +104,28 @@ Description:	QM debug registers(regs) read hardware register value. This
 		node is used to show the change of the qm registers value. This
 		node can be help users to check the change of register values.
 
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/qm_state
+Date:		Jan 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the state of the device.
+		0: busy, 1: idle.
+		Only available for PF, and take no other effect on ZIP.
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/dev_timeout
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the wait time when stop queue fails. Available for both PF
+		and VF, and take no other effect on ZIP.
+		0: not wait(default), others value: wait dev_timeout * 20 microsecond.
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/dev_state
+Date:		Feb 2024
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the stop queue status of the QM. The default value is 0,
+		if dev_timeout is set, when stop queue fails, the dev_state
+		will return non-zero value. Available for both PF and VF,
+		and take no other effect on ZIP.
+
 What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs
 Date:		Mar 2022
 Contact:	linux-crypto@vger.kernel.org
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/debugfs-intel-iommu linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-intel-iommu
new file mode 100644
index 000000000000..2ab8464504a9
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/debugfs-intel-iommu
@@ -0,0 +1,276 @@
+What:		/sys/kernel/debug/iommu/intel/iommu_regset
+Date:		December 2023
+Contact:	Jingqi Liu <Jingqi.liu@intel.com>
+Description:
+		This file dumps all the register contents for each IOMMU device.
+
+		Example in Kabylake:
+
+		::
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/iommu_regset
+
+		 IOMMU: dmar0 Register Base Address: 26be37000
+
+		 Name                    Offset          Contents
+		 VER                     0x00            0x0000000000000010
+		 GCMD                    0x18            0x0000000000000000
+		 GSTS                    0x1c            0x00000000c7000000
+		 FSTS                    0x34            0x0000000000000000
+		 FECTL                   0x38            0x0000000000000000
+
+		 [...]
+
+		 IOMMU: dmar1 Register Base Address: fed90000
+
+		 Name                    Offset          Contents
+		 VER                     0x00            0x0000000000000010
+		 GCMD                    0x18            0x0000000000000000
+		 GSTS                    0x1c            0x00000000c7000000
+		 FSTS                    0x34            0x0000000000000000
+		 FECTL                   0x38            0x0000000000000000
+
+		 [...]
+
+		 IOMMU: dmar2 Register Base Address: fed91000
+
+		 Name                    Offset          Contents
+		 VER                     0x00            0x0000000000000010
+		 GCMD                    0x18            0x0000000000000000
+		 GSTS                    0x1c            0x00000000c7000000
+		 FSTS                    0x34            0x0000000000000000
+		 FECTL                   0x38            0x0000000000000000
+
+		 [...]
+
+What:		/sys/kernel/debug/iommu/intel/ir_translation_struct
+Date:		December 2023
+Contact:	Jingqi Liu <Jingqi.liu@intel.com>
+Description:
+		This file dumps the table entries for Interrupt
+		remapping and Interrupt posting.
+
+		Example in Kabylake:
+
+		::
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/ir_translation_struct
+
+		 Remapped Interrupt supported on IOMMU: dmar0
+		 IR table address:100900000
+
+		 Entry SrcID   DstID    Vct IRTE_high           IRTE_low
+		 0     00:0a.0 00000080 24  0000000000040050    000000800024000d
+		 1     00:0a.0 00000001 ef  0000000000040050    0000000100ef000d
+
+		 Remapped Interrupt supported on IOMMU: dmar1
+		 IR table address:100300000
+		 Entry SrcID   DstID    Vct IRTE_high           IRTE_low
+		 0     00:02.0 00000002 26  0000000000040010    000000020026000d
+
+		 [...]
+
+		 ****
+
+		 Posted Interrupt supported on IOMMU: dmar0
+		 IR table address:100900000
+		 Entry SrcID   PDA_high PDA_low  Vct IRTE_high          IRTE_low
+
+What:		/sys/kernel/debug/iommu/intel/dmar_translation_struct
+Date:		December 2023
+Contact:	Jingqi Liu <Jingqi.liu@intel.com>
+Description:
+		This file dumps Intel IOMMU DMA remapping tables, such
+		as root table, context table, PASID directory and PASID
+		table entries in debugfs. For legacy mode, it doesn't
+		support PASID, and hence PASID field is defaulted to
+		'-1' and other PASID related fields are invalid.
+
+		Example in Kabylake:
+
+		::
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/dmar_translation_struct
+
+		 IOMMU dmar1: Root Table Address: 0x103027000
+		 B.D.F   Root_entry
+		 00:02.0 0x0000000000000000:0x000000010303e001
+
+		 Context_entry
+		 0x0000000000000102:0x000000010303f005
+
+		 PASID   PASID_table_entry
+		 -1      0x0000000000000000:0x0000000000000000:0x0000000000000000
+
+		 IOMMU dmar0: Root Table Address: 0x103028000
+		 B.D.F   Root_entry
+		 00:0a.0 0x0000000000000000:0x00000001038a7001
+
+		 Context_entry
+		 0x0000000000000000:0x0000000103220e7d
+
+		 PASID   PASID_table_entry
+		 0       0x0000000000000000:0x0000000000800002:0x00000001038a5089
+
+		 [...]
+
+What:		/sys/kernel/debug/iommu/intel/invalidation_queue
+Date:		December 2023
+Contact:	Jingqi Liu <Jingqi.liu@intel.com>
+Description:
+		This file exports invalidation queue internals of each
+		IOMMU device.
+
+		Example in Kabylake:
+
+		::
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/invalidation_queue
+
+		 Invalidation queue on IOMMU: dmar0
+		 Base: 0x10022e000      Head: 20        Tail: 20
+		 Index          qw0                    qw1                     qw2
+		     0   0000000000000014        0000000000000000        0000000000000000
+		     1   0000000200000025        0000000100059c04        0000000000000000
+		     2   0000000000000014        0000000000000000        0000000000000000
+
+				qw3                  status
+			 0000000000000000        0000000000000000
+			 0000000000000000        0000000000000000
+			 0000000000000000        0000000000000000
+
+		 [...]
+
+		 Invalidation queue on IOMMU: dmar1
+		 Base: 0x10026e000      Head: 32        Tail: 32
+		 Index           qw0                     qw1                   status
+		     0   0000000000000004        0000000000000000         0000000000000000
+		     1   0000000200000025        0000000100059804         0000000000000000
+		     2   0000000000000011        0000000000000000         0000000000000000
+
+		 [...]
+
+What:		/sys/kernel/debug/iommu/intel/dmar_perf_latency
+Date:		December 2023
+Contact:	Jingqi Liu <Jingqi.liu@intel.com>
+Description:
+		This file is used to control and show counts of
+		execution time ranges for various types per DMAR.
+
+		Firstly, write a value to
+		/sys/kernel/debug/iommu/intel/dmar_perf_latency
+		to enable sampling.
+
+		The possible values are as follows:
+
+		* 0 - disable sampling all latency data
+
+		* 1 - enable sampling IOTLB invalidation latency data
+
+		* 2 - enable sampling devTLB invalidation latency data
+
+		* 3 - enable sampling intr entry cache invalidation latency data
+
+		Next, read /sys/kernel/debug/iommu/intel/dmar_perf_latency gives
+		a snapshot of sampling result of all enabled monitors.
+
+		Examples in Kabylake:
+
+		::
+
+		 1) Disable sampling all latency data:
+
+		 $ sudo echo 0 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+		 2) Enable sampling IOTLB invalidation latency data
+
+		 $ sudo echo 1 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+		 IOMMU: dmar0 Register Base Address: 26be37000
+				 <0.1us   0.1us-1us    1us-10us  10us-100us   100us-1ms
+		 inv_iotlb           0           0           0           0           0
+
+				 1ms-10ms      >=10ms     min(us)     max(us) average(us)
+		 inv_iotlb           0           0           0           0           0
+
+		 [...]
+
+		 IOMMU: dmar2 Register Base Address: fed91000
+				 <0.1us   0.1us-1us    1us-10us  10us-100us   100us-1ms
+		 inv_iotlb           0           0          18           0           0
+
+				 1ms-10ms      >=10ms     min(us)     max(us) average(us)
+		 inv_iotlb           0           0           2           2           2
+
+		 3) Enable sampling devTLB invalidation latency data
+
+		 $ sudo echo 2 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+		 IOMMU: dmar0 Register Base Address: 26be37000
+				 <0.1us   0.1us-1us    1us-10us  10us-100us   100us-1ms
+		 inv_devtlb           0           0           0           0           0
+
+				 >=10ms     min(us)     max(us) average(us)
+		 inv_devtlb           0           0           0           0
+
+		 [...]
+
+What:		/sys/kernel/debug/iommu/intel/<bdf>/domain_translation_struct
+Date:		December 2023
+Contact:	Jingqi Liu <Jingqi.liu@intel.com>
+Description:
+		This file dumps a specified page table of Intel IOMMU
+		in legacy mode or scalable mode.
+
+		For a device that only supports legacy mode, dump its
+		page table by the debugfs file in the debugfs device
+		directory. e.g.
+		/sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct.
+
+		For a device that supports scalable mode, dump the
+		page table of specified pasid by the debugfs file in
+		the debugfs pasid directory. e.g.
+		/sys/kernel/debug/iommu/intel/0000:00:02.0/1/domain_translation_struct.
+
+		Examples in Kabylake:
+
+		::
+
+		 1) Dump the page table of device "0000:00:02.0" that only supports legacy mode.
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct
+
+		 Device 0000:00:02.0 @0x1017f8000
+		 IOVA_PFN                PML5E                   PML4E
+		 0x000000008d800 |       0x0000000000000000      0x00000001017f9003
+		 0x000000008d801 |       0x0000000000000000      0x00000001017f9003
+		 0x000000008d802 |       0x0000000000000000      0x00000001017f9003
+
+		 PDPE                    PDE                     PTE
+		 0x00000001017fa003      0x00000001017fb003      0x000000008d800003
+		 0x00000001017fa003      0x00000001017fb003      0x000000008d801003
+		 0x00000001017fa003      0x00000001017fb003      0x000000008d802003
+
+		 [...]
+
+		 2) Dump the page table of device "0000:00:0a.0" with PASID "1" that
+		 supports scalable mode.
+
+		 $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:0a.0/1/domain_translation_struct
+
+		 Device 0000:00:0a.0 with pasid 1 @0x10c112000
+		 IOVA_PFN                PML5E                   PML4E
+		 0x0000000000000 |       0x0000000000000000      0x000000010df93003
+		 0x0000000000001 |       0x0000000000000000      0x000000010df93003
+		 0x0000000000002 |       0x0000000000000000      0x000000010df93003
+
+		 PDPE                    PDE                     PTE
+		 0x0000000106ae6003      0x0000000104b38003      0x0000000147c00803
+		 0x0000000106ae6003      0x0000000104b38003      0x0000000147c01803
+		 0x0000000106ae6003      0x0000000104b38003      0x0000000147c02803
+
+		 [...]
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/gpio-cdev linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/gpio-cdev
index 66bdcd188b6c..c9689b2a6fed 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/gpio-cdev
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/gpio-cdev
@@ -6,8 +6,9 @@ Description:
 		The character device files /dev/gpiochip* are the interface
 		between GPIO chips and userspace.
 
-		The ioctl(2)-based ABI is defined and documented in
-		[include/uapi]<linux/gpio.h>.
+		The ioctl(2)-based ABI is defined in
+		[include/uapi]<linux/gpio.h> and documented in
+		Documentation/userspace-api/gpio/chardev.rst.
 
 		The following file operations are supported:
 
@@ -17,8 +18,8 @@ Description:
 		ioctl(2)
 		  Initiate various actions.
 
-		  See the inline documentation in [include/uapi]<linux/gpio.h>
-		  for descriptions of all ioctls.
+		  See Documentation/userspace-api/gpio/chardev.rst
+		  for a description of all ioctls.
 
 		close(2)
 		  Stops and free up the I/O contexts that was associated
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
index 4dd49b159543..b4d0fc8d319d 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -170,3 +170,90 @@ Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_t
 Description:
 		(RW) Set/Get the MSR(mux select register) for the DSB subunit
 		TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_mode
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:	(Write) Set the data collection mode of CMB tpdm. Continuous
+		change creates CMB data set elements on every CMBCLK edge.
+		Trace-on-change creates CMB data set elements only when a new
+		data set element differs in value from the previous element
+		in a CMB data set.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Continuous CMB collection mode.
+		1 : Trace-on-change CMB collection mode.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_trig_patt/xpr[0:1]
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the value of the trigger pattern for the CMB
+		subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_trig_patt/xpmr[0:1]
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the mask of the trigger pattern for the CMB
+		subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpr[0:1]
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the value of the pattern for the CMB subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpmr[0:1]
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the mask of the pattern for the CMB subunit TPDM.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_patt/enable_ts
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(Write) Set the pattern timestamp of CMB tpdm. Read
+		the pattern timestamp of CMB tpdm.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Disable CMB pattern timestamp.
+		1 : Enable CMB pattern timestamp.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_trig_ts
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the trigger timestamp of the CMB for tpdm.
+
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Set the CMB trigger type to false
+		1 : Set the CMB trigger type to true
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_ts_all
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Read or write the status of timestamp upon all interface.
+		Only value 0 and 1  can be written to this node. Set this node to 1 to requeset
+		timestamp to all trace packet.
+		Accepts only one of the 2 values -  0 or 1.
+		0 : Disable the timestamp of all trace packets.
+		1 : Enable the timestamp of all trace packets.
+
+What:		/sys/bus/coresight/devices/<tpdm-name>/cmb_msr/msr[0:31]
+Date:		January 2024
+KernelVersion	6.9
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(RW) Set/Get the MSR(mux select register) for the CMB subunit
+		TPDM.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-cxl linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-cxl
index fff2581b8033..3f5627a1210a 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-cxl
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-cxl
@@ -552,3 +552,37 @@ Description:
 		attribute is only visible for devices supporting the
 		capability. The retrieved errors are logged as kernel
 		events when cxl_poison event tracing is enabled.
+
+
+What:		/sys/bus/cxl/devices/regionZ/accessY/read_bandwidth
+		/sys/bus/cxl/devices/regionZ/accessY/write_banwidth
+Date:		Jan, 2024
+KernelVersion:	v6.9
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) The aggregated read or write bandwidth of the region. The
+		number is the accumulated read or write bandwidth of all CXL memory
+		devices that contributes to the region in MB/s. It is
+		identical data that should appear in
+		/sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth or
+		/sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth.
+		See Documentation/ABI/stable/sysfs-devices-node. access0 provides
+		the number to the closest initiator and access1 provides the
+		number to the closest CPU.
+
+
+What:		/sys/bus/cxl/devices/regionZ/accessY/read_latency
+		/sys/bus/cxl/devices/regionZ/accessY/write_latency
+Date:		Jan, 2024
+KernelVersion:	v6.9
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) The read or write latency of the region. The number is
+		the worst read or write latency of all CXL memory devices that
+		contributes to the region in nanoseconds. It is identical data
+		that should appear in
+		/sys/devices/system/node/nodeX/accessY/initiators/read_latency or
+		/sys/devices/system/node/nodeX/accessY/initiators/write_latency.
+		See Documentation/ABI/stable/sysfs-devices-node. access0 provides
+		the number to the closest initiator and access1 provides the
+		number to the closest CPU.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-dax linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-dax
new file mode 100644
index 000000000000..b34266bfae49
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-dax
@@ -0,0 +1,153 @@
+What:		/sys/bus/dax/devices/daxX.Y/align
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RW) Provides a way to specify an alignment for a dax device.
+		Values allowed are constrained by the physical address ranges
+		that back the dax device, and also by arch requirements.
+
+What:		/sys/bus/dax/devices/daxX.Y/mapping
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(WO) Provides a way to allocate a mapping range under a dax
+		device. Specified in the format <start>-<end>.
+
+What:		/sys/bus/dax/devices/daxX.Y/mapping[0..N]/start
+What:		/sys/bus/dax/devices/daxX.Y/mapping[0..N]/end
+What:		/sys/bus/dax/devices/daxX.Y/mapping[0..N]/page_offset
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) A dax device may have multiple constituent discontiguous
+		address ranges. These are represented by the different
+		'mappingX' subdirectories. The 'start' attribute indicates the
+		start physical address for the given range. The 'end' attribute
+		indicates the end physical address for the given range. The
+		'page_offset' attribute indicates the offset of the current
+		range in the dax device.
+
+What:		/sys/bus/dax/devices/daxX.Y/resource
+Date:		June, 2019
+KernelVersion:	v5.3
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The resource attribute indicates the starting physical
+		address of a dax device. In case of a device with multiple
+		constituent ranges, it indicates the starting address of the
+		first range.
+
+What:		/sys/bus/dax/devices/daxX.Y/size
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RW) The size attribute indicates the total size of a dax
+		device. For creating subdivided dax devices, or for resizing
+		an existing device, the new size can be written to this as
+		part of the reconfiguration process.
+
+What:		/sys/bus/dax/devices/daxX.Y/numa_node
+Date:		November, 2019
+KernelVersion:	v5.5
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) If NUMA is enabled and the platform has affinitized the
+		backing device for this dax device, emit the CPU node
+		affinity for this device.
+
+What:		/sys/bus/dax/devices/daxX.Y/target_node
+Date:		February, 2019
+KernelVersion:	v5.1
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The target-node attribute is the Linux numa-node that a
+		device-dax instance may create when it is online. Prior to
+		being online the device's 'numa_node' property reflects the
+		closest online cpu node which is the typical expectation of a
+		device 'numa_node'. Once it is online it becomes its own
+		distinct numa node.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/available_size
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The available_size attribute tracks available dax region
+		capacity. This only applies to volatile hmem devices, not pmem
+		devices, since pmem devices are defined by nvdimm namespace
+		boundaries.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/size
+Date:		July, 2017
+KernelVersion:	v5.1
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The size attribute indicates the size of a given dax region
+		in bytes.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/align
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The align attribute indicates alignment of the dax region.
+		Changes on align may not always be valid, when say certain
+		mappings were created with 2M and then we switch to 1G. This
+		validates all ranges against the new value being attempted, post
+		resizing.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/seed
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The seed device is a concept for dynamic dax regions to be
+		able to split the region amongst multiple sub-instances.  The
+		seed device, similar to libnvdimm seed devices, is a device
+		that starts with zero capacity allocated and unbound to a
+		driver.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/create
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RW) The create interface to the dax region provides a way to
+		create a new unconfigured dax device under the given region, which
+		can then be configured (with a size etc.) and then probed.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/delete
+Date:		October, 2020
+KernelVersion:	v5.10
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(WO) The delete interface for a dax region provides for deletion
+		of any 0-sized and idle dax devices.
+
+What:		$(readlink -f /sys/bus/dax/devices/daxX.Y)/../dax_region/id
+Date:		July, 2017
+KernelVersion:	v5.1
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RO) The id attribute indicates the region id of a dax region.
+
+What:		/sys/bus/dax/devices/daxX.Y/memmap_on_memory
+Date:		January, 2024
+KernelVersion:	v6.8
+Contact:	nvdimm@lists.linux.dev
+Description:
+		(RW) Control the memmap_on_memory setting if the dax device
+		were to be hotplugged as system memory. This determines whether
+		the 'altmap' for the hotplugged memory will be placed on the
+		device being hotplugged (memmap_on_memory=1) or if it will be
+		placed on regular memory (memmap_on_memory=0). This attribute
+		must be set before the device is handed over to the 'kmem'
+		driver (i.e.  hotplugged into system-ram). Additionally, this
+		depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled
+		memmap_on_memory parameter for memory_hotplug. This is
+		typically set on the kernel command line -
+		memory_hotplug.memmap_on_memory set to 'true' or 'force'."
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934
new file mode 100644
index 000000000000..625b7f867847
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934
@@ -0,0 +1,9 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistorY
+KernelVersion:	6.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value of the shunt resistor may be known only at runtime
+		and set by a client application. This attribute allows to
+		set its value in micro-ohms. X is the IIO index of the device.
+		Y is the channel number. The value is used to calculate
+		current, power and accumulated energy.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index 860db53037a5..d1f67bb81d5d 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -11,7 +11,7 @@ saw any problems).
 
 What:		/sys/bus/pci/devices/<dev>/aer_dev_correctable
 Date:		July 2018
-KernelVersion: 4.19.0
+KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	List of correctable errors seen and reported by this
 		PCI device using ERR_COR. Note that since multiple errors may
@@ -32,7 +32,7 @@ Description:	List of correctable errors seen and reported by this
 
 What:		/sys/bus/pci/devices/<dev>/aer_dev_fatal
 Date:		July 2018
-KernelVersion: 4.19.0
+KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	List of uncorrectable fatal errors seen and reported by this
 		PCI device using ERR_FATAL. Note that since multiple errors may
@@ -62,7 +62,7 @@ Description:	List of uncorrectable fatal errors seen and reported by this
 
 What:		/sys/bus/pci/devices/<dev>/aer_dev_nonfatal
 Date:		July 2018
-KernelVersion: 4.19.0
+KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	List of uncorrectable nonfatal errors seen and reported by this
 		PCI device using ERR_NONFATAL. Note that since multiple errors
@@ -100,20 +100,20 @@ collectors) that are AER capable. These indicate the number of error messages as
 device, so these counters include them and are thus cumulative of all the error
 messages on the PCI hierarchy originating at that root port.
 
-What:		/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor
 Date:		July 2018
-KernelVersion: 4.19.0
+KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_COR messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal
 Date:		July 2018
-KernelVersion: 4.19.0
+KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_FATAL messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal
 Date:		July 2018
-KernelVersion: 4.19.0
+KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_NONFATAL messages reported to rootport.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-avs linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-avs
new file mode 100644
index 000000000000..ebff3fa12055
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-avs
@@ -0,0 +1,8 @@
+What:		/sys/devices/pci0000:00/<dev>/avs/fw_version
+Date:		February 2024
+Contact:	Cezary Rojewski <cezary.rojewski@intel.com>
+Description:
+		Version of AudioDSP firmware ASoC avs driver is communicating
+		with.
+
+		Format: %d.%d.%d.%d, type:major:minor:build.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-usb linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-usb
index 2b7108e21977..af9b653422f1 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-usb
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-usb
@@ -442,6 +442,16 @@ What:		/sys/bus/usb/devices/usbX/descriptors
 Description:
 		Contains the interface descriptors, in binary.
 
+What:		/sys/bus/usb/devices/usbX/bos_descriptors
+Date:		March 2024
+Contact:	Elbert Mai <code@elbertmai.com>
+Description:
+		Binary file containing the cached binary device object store (BOS)
+		of the device. This consists of the BOS descriptor followed by the
+		set of device capability descriptors. All descriptors read from
+		this file are in bus-endian format. Note that the kernel will not
+		request the BOS from a device if its bcdUSB is less than 0x0201.
+
 What:		/sys/bus/usb/devices/usbX/idProduct
 Description:
 		Product ID, in hexadecimal.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-vdpa linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-vdpa
index 4da53878bff6..2c833b5163f2 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-bus-vdpa
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-bus-vdpa
@@ -1,6 +1,6 @@
 What:		/sys/bus/vdpa/drivers_autoprobe
 Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
+Contact:	virtualization@lists.linux.dev
 Description:
 		This file determines whether new devices are immediately bound
 		to a driver after the creation. It initially contains 1, which
@@ -12,7 +12,7 @@ Description:
 
 What:		/sys/bus/vdpa/driver_probe
 Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
+Contact:	virtualization@lists.linux.dev
 Description:
 		Writing a device name to this file will cause the kernel binds
 		devices to a compatible driver.
@@ -22,7 +22,7 @@ Description:
 
 What:		/sys/bus/vdpa/drivers/.../bind
 Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
+Contact:	virtualization@lists.linux.dev
 Description:
 		Writing a device name to this file will cause the driver to
 		attempt to bind to the device. This is useful for overriding
@@ -30,7 +30,7 @@ Description:
 
 What:		/sys/bus/vdpa/drivers/.../unbind
 Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
+Contact:	virtualization@lists.linux.dev
 Description:
 		Writing a device name to this file will cause the driver to
 		attempt to unbind from the device. This may be useful when
@@ -38,7 +38,7 @@ Description:
 
 What:		/sys/bus/vdpa/devices/.../driver_override
 Date:		November 2021
-Contact:	virtualization@lists.linux-foundation.org
+Contact:	virtualization@lists.linux.dev
 Description:
 		This file allows the driver for a device to be specified.
 		When specified, only a driver with a name matching the value
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-hwmon linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-hwmon
index 3dac923c9b0e..cfd0d0bab483 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-hwmon
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-hwmon
@@ -149,6 +149,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/inY_fault
+Description:
+		Reports a voltage hard failure (eg: shorted component)
+
+		- 1: Failed
+		- 0: Ok
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/cpuY_vid
 Description:
 		CPU core reference voltage.
@@ -968,6 +977,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_max_alarm
+Description:
+		Maximum humidity detection
+
+		- 0: OK
+		- 1: Maximum humidity detected
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/humidityY_max_hyst
 Description:
 		Humidity hysteresis value for max limit.
@@ -987,6 +1005,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_min_alarm
+Description:
+		Minimum humidity detection
+
+		- 0: OK
+		- 1: Minimum humidity detected
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/humidityY_min_hyst
 Description:
 		Humidity hysteresis value for min limit.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
index a6c307c4befa..ed46b37ab8a2 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -88,6 +88,8 @@ Description:
 		speed of 10MBps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 10Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_100
 Date:		Jun 2023
 KernelVersion:	6.5
@@ -101,6 +103,8 @@ Description:
 		speed of 100Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 100Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_1000
 Date:		Jun 2023
 KernelVersion:	6.5
@@ -114,6 +118,8 @@ Description:
 		speed of 1000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 1000Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_2500
 Date:		Nov 2023
 KernelVersion:	6.8
@@ -127,6 +133,8 @@ Description:
 		speed of 2500Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 2500Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_5000
 Date:		Nov 2023
 KernelVersion:	6.8
@@ -140,6 +148,8 @@ Description:
 		speed of 5000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 5000Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_10000
 Date:		Nov 2023
 KernelVersion:	6.8
@@ -153,6 +163,8 @@ Description:
 		speed of 10000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 10000Mbps link speed.
+
 What:		/sys/class/leds/<led>/half_duplex
 Date:		Jun 2023
 KernelVersion:	6.5
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty
index 30cef9ac0f49..308fbc3627cd 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-led-trigger-tty
@@ -1,11 +1,11 @@
-What:		/sys/class/leds/<led>/ttyname
+What:		/sys/class/leds/<tty_led>/ttyname
 Date:		Dec 2020
 KernelVersion:	5.10
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Specifies the tty device name of the triggering tty
 
-What:		/sys/class/leds/<led>/rx
+What:		/sys/class/leds/<tty_led>/rx
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -13,7 +13,7 @@ Description:
 		If set to 0, the LED will not blink on reception.
 		If set to 1 (default), the LED will blink on reception.
 
-What:		/sys/class/leds/<led>/tx
+What:		/sys/class/leds/<tty_led>/tx
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -21,7 +21,7 @@ Description:
 		If set to 0, the LED will not blink on transmission.
 		If set to 1 (default), the LED will blink on transmission.
 
-What:		/sys/class/leds/<led>/cts
+What:		/sys/class/leds/<tty_led>/cts
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -31,7 +31,7 @@ Description:
 		If set to 0 (default), the LED will not evaluate CTS.
 		If set to 1, the LED will evaluate CTS.
 
-What:		/sys/class/leds/<led>/dsr
+What:		/sys/class/leds/<tty_led>/dsr
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -41,7 +41,7 @@ Description:
 		If set to 0 (default), the LED will not evaluate DSR.
 		If set to 1, the LED will evaluate DSR.
 
-What:		/sys/class/leds/<led>/dcd
+What:		/sys/class/leds/<tty_led>/dcd
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -51,7 +51,7 @@ Description:
 		If set to 0 (default), the LED will not evaluate CAR (DCD).
 		If set to 1, the LED will evaluate CAR (DCD).
 
-What:		/sys/class/leds/<led>/rng
+What:		/sys/class/leds/<tty_led>/rng
 Date:		February 2024
 KernelVersion:	6.8
 Description:
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 5bff64d256c2..84aa25e0d14d 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -96,3 +96,26 @@ Description:
 		Indicates the absolute minimum limit of bytes allowed to be
 		queued on this network device transmit queue. Default value is
 		0.
+
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_thrs
+Date:		Jan 2024
+KernelVersion:	6.9
+Contact:	netdev@vger.kernel.org
+Description:
+		Tx completion stall detection threshold in ms. Kernel will
+		guarantee to detect all stalls longer than this threshold but
+		may also detect stalls longer than half of the threshold.
+
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_cnt
+Date:		Jan 2024
+KernelVersion:	6.9
+Contact:	netdev@vger.kernel.org
+Description:
+		Number of detected Tx completion stalls.
+
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_max
+Date:		Jan 2024
+KernelVersion:	6.9
+Contact:	netdev@vger.kernel.org
+Description:
+		Longest detected Tx completion stall. Write 0 to clear.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-usb_role linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-usb_role
index 3b810a425a52..9fab3f06679e 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-class-usb_role
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-class-usb_role
@@ -19,3 +19,9 @@ Description:
 		- none
 		- host
 		- device
+
+What:		/sys/class/usb_role/<switch>/connector
+Date:		Feb 2024
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Optional symlink to the USB Type-C connector.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index a1db6db47505..710d47be11e0 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -516,6 +516,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-qat linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-driver-qat
index bbf329cf0d67..96020fb051c3 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-driver-qat
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-driver-qat
@@ -141,3 +141,23 @@ Description:
 			64
 
 		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat/auto_reset
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(RW) Reports the current state of the autoreset feature
+		for a QAT device
+
+		Write to the attribute to enable or disable device auto reset.
+
+		Device auto reset is disabled by default.
+
+		The values are:
+
+		* 1/Yy/on: auto reset enabled. If the device encounters an
+		  unrecoverable error, it will be reset automatically.
+		* 0/Nn/off: auto reset disabled. If the device encounters an
+		  unrecoverable error, it will not be reset.
+
+		This attribute is only available for qat_4xxx devices.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 99fa87a43926..1a4d83953379 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -205,7 +205,7 @@ Description:	Controls the idle timing of system, if there is no FS operation
 What:		/sys/fs/f2fs/<disk>/discard_idle_interval
 Date:		September 2018
 Contact:	"Chao Yu" <yuchao0@huawei.com>
-Contact:	"Sahitya Tummala" <stummala@codeaurora.org>
+Contact:	"Sahitya Tummala" <quic_stummala@quicinc.com>
 Description:	Controls the idle timing of discard thread given
 		this time interval.
 		Default is 5 secs.
@@ -213,7 +213,7 @@ Description:	Controls the idle timing of discard thread given
 What:		/sys/fs/f2fs/<disk>/gc_idle_interval
 Date:		September 2018
 Contact:	"Chao Yu" <yuchao0@huawei.com>
-Contact:	"Sahitya Tummala" <stummala@codeaurora.org>
+Contact:	"Sahitya Tummala" <quic_stummala@quicinc.com>
 Description:    Controls the idle timing for gc path. Set to 5 seconds by default.
 
 What:		/sys/fs/f2fs/<disk>/iostat_enable
@@ -701,29 +701,31 @@ Description:	Support configuring fault injection type, should be
 		enabled with fault_injection option, fault type value
 		is shown below, it supports single or combined type.
 
-		===================      ===========
-		Type_Name                Type_Value
-		===================      ===========
-		FAULT_KMALLOC            0x000000001
-		FAULT_KVMALLOC           0x000000002
-		FAULT_PAGE_ALLOC         0x000000004
-		FAULT_PAGE_GET           0x000000008
-		FAULT_ALLOC_BIO          0x000000010 (obsolete)
-		FAULT_ALLOC_NID          0x000000020
-		FAULT_ORPHAN             0x000000040
-		FAULT_BLOCK              0x000000080
-		FAULT_DIR_DEPTH          0x000000100
-		FAULT_EVICT_INODE        0x000000200
-		FAULT_TRUNCATE           0x000000400
-		FAULT_READ_IO            0x000000800
-		FAULT_CHECKPOINT         0x000001000
-		FAULT_DISCARD            0x000002000
-		FAULT_WRITE_IO           0x000004000
-		FAULT_SLAB_ALLOC         0x000008000
-		FAULT_DQUOT_INIT         0x000010000
-		FAULT_LOCK_OP            0x000020000
-		FAULT_BLKADDR            0x000040000
-		===================      ===========
+		===========================      ===========
+		Type_Name                        Type_Value
+		===========================      ===========
+		FAULT_KMALLOC                    0x000000001
+		FAULT_KVMALLOC                   0x000000002
+		FAULT_PAGE_ALLOC                 0x000000004
+		FAULT_PAGE_GET                   0x000000008
+		FAULT_ALLOC_BIO                  0x000000010 (obsolete)
+		FAULT_ALLOC_NID                  0x000000020
+		FAULT_ORPHAN                     0x000000040
+		FAULT_BLOCK                      0x000000080
+		FAULT_DIR_DEPTH                  0x000000100
+		FAULT_EVICT_INODE                0x000000200
+		FAULT_TRUNCATE                   0x000000400
+		FAULT_READ_IO                    0x000000800
+		FAULT_CHECKPOINT                 0x000001000
+		FAULT_DISCARD                    0x000002000
+		FAULT_WRITE_IO                   0x000004000
+		FAULT_SLAB_ALLOC                 0x000008000
+		FAULT_DQUOT_INIT                 0x000010000
+		FAULT_LOCK_OP                    0x000020000
+		FAULT_BLKADDR_VALIDITY           0x000040000
+		FAULT_BLKADDR_CONSISTENCE        0x000080000
+		FAULT_NO_SEGMENT                 0x000100000
+		===========================      ===========
 
 What:		/sys/fs/f2fs/<disk>/discard_io_aware_gran
 Date:		January 2023
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-fs-virtiofs linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-fs-virtiofs
new file mode 100644
index 000000000000..4839dbce997e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-fs-virtiofs
@@ -0,0 +1,11 @@
+What:		/sys/fs/virtiofs/<n>/tag
+Date:		Feb 2024
+Contact:	virtio-fs@lists.linux.dev
+Description:
+		[RO] The mount "tag" that can be used to mount this filesystem.
+
+What:		/sys/fs/virtiofs/<n>/device
+Date:		Feb 2024
+Contact:	virtio-fs@lists.linux.dev
+Description:
+		Symlink to the virtio device that exports this filesystem.
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-cma linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-cma
index 02b2bb60c296..dfd755201142 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-cma
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-cma
@@ -23,3 +23,9 @@ Date:		Feb 2021
 Contact:	Minchan Kim <minchan@kernel.org>
 Description:
 		the number of pages CMA API failed to allocate
+
+What:		/sys/kernel/mm/cma/<cma-heap-name>/release_pages_success
+Date:		Feb 2024
+Contact:	Anshuman Khandual <anshuman.khandual@arm.com>
+Description:
+		the number of pages CMA API succeeded to release
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
index bfa5b8288d8d..dad4d5ffd786 100644
--- linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
@@ -34,7 +34,9 @@ Description:	Writing 'on' or 'off' to this file makes the kdamond starts or
 		kdamond.  Writing 'update_schemes_tried_bytes' to the file
 		updates only '.../tried_regions/total_bytes' files of this
 		kdamond.  Writing 'clear_schemes_tried_regions' to the file
-		removes contents of the 'tried_regions' directory.
+		removes contents of the 'tried_regions' directory.  Writing
+		'update_schemes_effective_quotas' to the file updates
+		'.../quotas/effective_bytes' files of this kdamond.
 
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/pid
 Date:		Mar 2022
@@ -208,6 +210,12 @@ Contact:	SeongJae Park <sj@kernel.org>
 Description:	Writing to and reading from this file sets and gets the size
 		quota of the scheme in bytes.
 
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/effective_bytes
+Date:		Feb 2024
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading from this file gets the effective size quota of the
+		scheme in bytes, which adjusted for the time quota and goals.
+
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/reset_interval_ms
 Date:		Mar 2022
 Contact:	SeongJae Park <sj@kernel.org>
@@ -221,6 +229,12 @@ Description:	Writing a number 'N' to this file creates the number of
 		directories for setting automatic tuning of the scheme's
 		aggressiveness named '0' to 'N-1' under the goals/ directory.
 
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_metric
+Date:		Feb 2024
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the quota
+		auto-tuning goal metric.
+
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_value
 Date:		Nov 2023
 Contact:	SeongJae Park <sj@kernel.org>
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy
new file mode 100644
index 000000000000..8ac327fd7fb6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy
@@ -0,0 +1,4 @@
+What:		/sys/kernel/mm/mempolicy/
+Date:		January 2024
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for Mempolicy
diff --git linux-libre-6.8-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
new file mode 100644
index 000000000000..0b7972de04e9
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
@@ -0,0 +1,25 @@
+What:		/sys/kernel/mm/mempolicy/weighted_interleave/
+Date:		January 2024
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Configuration Interface for the Weighted Interleave policy
+
+What:		/sys/kernel/mm/mempolicy/weighted_interleave/nodeN
+Date:		January 2024
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Weight configuration interface for nodeN
+
+		The interleave weight for a memory node (N). These weights are
+		utilized by tasks which have set their mempolicy to
+		MPOL_WEIGHTED_INTERLEAVE.
+
+		These weights only affect new allocations, and changes at runtime
+		will not cause migrations on already allocated pages.
+
+		The minimum weight for a node is always 1.
+
+		Minimum weight: 1
+		Maximum weight: 255
+
+		Writing an empty string or `0` will reset the weight to the
+		system default. The system default may be set by the kernel
+		or drivers at boot or during hotplug events.
diff --git linux-libre-6.8-gnu/Documentation/Makefile linux-libre-6.9-rc6-gnu/Documentation/Makefile
index 3885bbe260eb..b68f8c816897 100644
--- linux-libre-6.8-gnu/Documentation/Makefile
+++ linux-libre-6.9-rc6-gnu/Documentation/Makefile
@@ -111,7 +111,9 @@ $(YNL_INDEX): $(YNL_RST_FILES)
 $(YNL_RST_DIR)/%.rst: $(YNL_YAML_DIR)/%.yaml $(YNL_TOOL)
 	$(Q)$(YNL_TOOL) -i $< -o $@
 
-htmldocs: $(YNL_INDEX)
+htmldocs texinfodocs latexdocs epubdocs xmldocs: $(YNL_INDEX)
+
+htmldocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
@@ -176,6 +178,7 @@ refcheckdocs:
 	$(Q)cd $(srctree);scripts/documentation-file-ref-check
 
 cleandocs:
+	$(Q)rm -f $(YNL_INDEX) $(YNL_RST_FILES)
 	$(Q)rm -rf $(BUILDDIR)
 	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media clean
 
diff --git linux-libre-6.8-gnu/Documentation/RCU/checklist.rst linux-libre-6.9-rc6-gnu/Documentation/RCU/checklist.rst
index 2d42998a89a6..3e6407de231c 100644
--- linux-libre-6.8-gnu/Documentation/RCU/checklist.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/RCU/checklist.rst
@@ -68,7 +68,8 @@ over a rather long period of time, but improvements are always welcome!
 	rcu_read_lock_sched(), or by the appropriate update-side lock.
 	Explicit disabling of preemption (preempt_disable(), for example)
 	can serve as rcu_read_lock_sched(), but is less readable and
-	prevents lockdep from detecting locking issues.
+	prevents lockdep from detecting locking issues.  Acquiring a
+	spinlock also enters an RCU read-side critical section.
 
 	Please note that you *cannot* rely on code known to be built
 	only in non-preemptible kernels.  Such code can and will break,
@@ -382,16 +383,17 @@ over a rather long period of time, but improvements are always welcome!
 	must use whatever locking or other synchronization is required
 	to safely access and/or modify that data structure.
 
-	Do not assume that RCU callbacks will be executed on the same
-	CPU that executed the corresponding call_rcu() or call_srcu().
-	For example, if a given CPU goes offline while having an RCU
-	callback pending, then that RCU callback will execute on some
-	surviving CPU.	(If this was not the case, a self-spawning RCU
-	callback would prevent the victim CPU from ever going offline.)
-	Furthermore, CPUs designated by rcu_nocbs= might well *always*
-	have their RCU callbacks executed on some other CPUs, in fact,
-	for some  real-time workloads, this is the whole point of using
-	the rcu_nocbs= kernel boot parameter.
+	Do not assume that RCU callbacks will be executed on
+	the same CPU that executed the corresponding call_rcu(),
+	call_srcu(), call_rcu_tasks(), call_rcu_tasks_rude(), or
+	call_rcu_tasks_trace().  For example, if a given CPU goes offline
+	while having an RCU callback pending, then that RCU callback
+	will execute on some surviving CPU.  (If this was not the case,
+	a self-spawning RCU callback would prevent the victim CPU from
+	ever going offline.)  Furthermore, CPUs designated by rcu_nocbs=
+	might well *always* have their RCU callbacks executed on some
+	other CPUs, in fact, for some  real-time workloads, this is the
+	whole point of using the rcu_nocbs= kernel boot parameter.
 
 	In addition, do not assume that callbacks queued in a given order
 	will be invoked in that order, even if they all are queued on the
@@ -444,7 +446,7 @@ over a rather long period of time, but improvements are always welcome!
 	real-time workloads than is synchronize_rcu_expedited().
 
 	It is also permissible to sleep in RCU Tasks Trace read-side
-	critical, which are delimited by rcu_read_lock_trace() and
+	critical section, which are delimited by rcu_read_lock_trace() and
 	rcu_read_unlock_trace().  However, this is a specialized flavor
 	of RCU, and you should not use it without first checking with
 	its current users.  In most cases, you should instead use SRCU.
@@ -490,6 +492,12 @@ over a rather long period of time, but improvements are always welcome!
 		since the last time that you passed that same object to
 		call_rcu() (or friends).
 
+	CONFIG_RCU_STRICT_GRACE_PERIOD:
+		combine with KASAN to check for pointers leaked out
+		of RCU read-side critical sections.  This Kconfig
+		option is tough on both performance and scalability,
+		and so is limited to four-CPU systems.
+
 	__rcu sparse checks:
 		tag the pointer to the RCU-protected data structure
 		with __rcu, and sparse will warn you if you access that
diff --git linux-libre-6.8-gnu/Documentation/RCU/rcu_dereference.rst linux-libre-6.9-rc6-gnu/Documentation/RCU/rcu_dereference.rst
index 659d5913784d..2524dcdadde2 100644
--- linux-libre-6.8-gnu/Documentation/RCU/rcu_dereference.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/RCU/rcu_dereference.rst
@@ -408,7 +408,10 @@ member of the rcu_dereference() to use in various situations:
 	RCU flavors, an RCU read-side critical section is entered
 	using rcu_read_lock(), anything that disables bottom halves,
 	anything that disables interrupts, or anything that disables
-	preemption.
+	preemption.  Please note that spinlock critical sections
+	are also implied RCU read-side critical sections, even when
+	they are preemptible, as they are in kernels built with
+	CONFIG_PREEMPT_RT=y.
 
 2.	If the access might be within an RCU read-side critical section
 	on the one hand, or protected by (say) my_lock on the other,
diff --git linux-libre-6.8-gnu/Documentation/RCU/torture.rst linux-libre-6.9-rc6-gnu/Documentation/RCU/torture.rst
index 49e7beea6ae1..4b1f99c4181f 100644
--- linux-libre-6.8-gnu/Documentation/RCU/torture.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/RCU/torture.rst
@@ -318,7 +318,7 @@ Suppose that a previous kvm.sh run left its output in this directory::
 
 	tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
 
-Then this run can be re-run without rebuilding as follow:
+Then this run can be re-run without rebuilding as follow::
 
 	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
 
diff --git linux-libre-6.8-gnu/Documentation/RCU/whatisRCU.rst linux-libre-6.9-rc6-gnu/Documentation/RCU/whatisRCU.rst
index 60ce02475142..872ac665223f 100644
--- linux-libre-6.8-gnu/Documentation/RCU/whatisRCU.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/RCU/whatisRCU.rst
@@ -172,14 +172,25 @@ rcu_read_lock()
 	critical section.  Reference counts may be used in conjunction
 	with RCU to maintain longer-term references to data structures.
 
+	Note that anything that disables bottom halves, preemption,
+	or interrupts also enters an RCU read-side critical section.
+	Acquiring a spinlock also enters an RCU read-side critical
+	sections, even for spinlocks that do not disable preemption,
+	as is the case in kernels built with CONFIG_PREEMPT_RT=y.
+	Sleeplocks do *not* enter RCU read-side critical sections.
+
 rcu_read_unlock()
 ^^^^^^^^^^^^^^^^^
 	void rcu_read_unlock(void);
 
 	This temporal primitives is used by a reader to inform the
 	reclaimer that the reader is exiting an RCU read-side critical
-	section.  Note that RCU read-side critical sections may be nested
-	and/or overlapping.
+	section.  Anything that enables bottom halves, preemption,
+	or interrupts also exits an RCU read-side critical section.
+	Releasing a spinlock also exits an RCU read-side critical section.
+
+	Note that RCU read-side critical sections may be nested and/or
+	overlapping.
 
 synchronize_rcu()
 ^^^^^^^^^^^^^^^^^
@@ -952,8 +963,8 @@ unfortunately any spinlock in a ``SLAB_TYPESAFE_BY_RCU`` object must be
 initialized after each and every call to kmem_cache_alloc(), which renders
 reference-free spinlock acquisition completely unsafe.  Therefore, when
 using ``SLAB_TYPESAFE_BY_RCU``, make proper use of a reference counter.
-(Those willing to use a kmem_cache constructor may also use locking,
-including cache-friendly sequence locking.)
+(Those willing to initialize their locks in a kmem_cache constructor
+may also use locking, including cache-friendly sequence locking.)
 
 With traditional reference counting -- such as that implemented by the
 kref library in Linux -- there is typically code that runs when the last
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/RAS/address-translation.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/address-translation.rst
new file mode 100644
index 000000000000..f0ca17b43cd3
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/address-translation.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Address translation
+===================
+
+x86 AMD
+-------
+
+Zen-based AMD systems include a Data Fabric that manages the layout of
+physical memory. Devices attached to the Fabric, like memory controllers,
+I/O, etc., may not have a complete view of the system physical memory map.
+These devices may provide a "normalized", i.e. device physical, address
+when reporting memory errors. Normalized addresses must be translated to
+a system physical address for the kernel to action on the memory.
+
+AMD Address Translation Library (CONFIG_AMD_ATL) provides translation for
+this case.
+
+Glossary of acronyms used in address translation for Zen-based systems
+
+* CCM               = Cache Coherent Moderator
+* COD               = Cluster-on-Die
+* COH_ST            = Coherent Station
+* DF                = Data Fabric
diff --git linux-libre-6.8-gnu/Documentation/RAS/ras.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/error-decoding.rst
similarity index 73%
rename from Documentation/RAS/ras.rst
rename to Documentation/admin-guide/RAS/error-decoding.rst
index 2556b397cd27..26a72f3fe5de 100644
--- linux-libre-6.8-gnu/Documentation/RAS/ras.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/error-decoding.rst
@@ -1,15 +1,10 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-Reliability, Availability and Serviceability features
-=====================================================
-
-This documents different aspects of the RAS functionality present in the
-kernel.
-
 Error decoding
----------------
+==============
 
-* x86
+x86
+---
 
 Error decoding on AMD systems should be done using the rasdaemon tool:
 https://github.com/mchehab/rasdaemon/
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/RAS/index.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/index.rst
new file mode 100644
index 000000000000..f4087040a7c0
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/index.rst
@@ -0,0 +1,7 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. toctree::
+   :maxdepth: 2
+
+   main
+   error-decoding
+   address-translation
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/ras.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/main.rst
similarity index 99%
rename from Documentation/admin-guide/ras.rst
rename to Documentation/admin-guide/RAS/main.rst
index 8e03751d126d..7ac1d4ccc509 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/ras.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/RAS/main.rst
@@ -1,8 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
-============================================
-Reliability, Availability and Serviceability
-============================================
+==================================================
+Reliability, Availability and Serviceability (RAS)
+==================================================
+
+This documents different aspects of the RAS functionality present in the
+kernel.
 
 RAS concepts
 ************
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/README.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/README.rst
index 81d58195ac43..95c479066019 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/README.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/README.rst
@@ -300,9 +300,11 @@ Compiling the kernel
  - Make sure you have at least gcc 5.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
- - Do a ``make`` to create a compressed kernel image. It is also
-   possible to do ``make install`` if you have lilo installed to suit the
-   kernel makefiles, but you may want to check your particular lilo setup first.
+ - Do a ``make`` to create a compressed kernel image. It is also possible to do
+   ``make install`` if you have lilo installed or if your distribution has an
+   install script recognised by the kernel's installer. Most popular
+   distributions will have a recognized install script. You may want to
+   check your distribution's setup first.
 
    To do the actual install, you have to be root, but none of the normal
    build should require that. Don't take the name of root in vain.
@@ -339,32 +341,51 @@ Compiling the kernel
    image (e.g. .../linux/arch/x86/boot/bzImage after compilation)
    to the place where your regular bootable kernel is found.
 
- - Booting a kernel directly from a floppy without the assistance of a
-   bootloader such as LILO, is no longer supported.
+ - Booting a kernel directly from a storage device without the assistance
+   of a bootloader such as LILO or GRUB, is no longer supported in BIOS
+   (non-EFI systems). On UEFI/EFI systems, however, you can use EFISTUB
+   which allows the motherboard to boot directly to the kernel.
+   On modern workstations and desktops, it's generally recommended to use a
+   bootloader as difficulties can arise with multiple kernels and secure boot.
+   For more details on EFISTUB,
+   see "Documentation/admin-guide/efi-stub.rst".
+
+ - It's important to note that as of 2016 LILO (LInux LOader) is no longer in
+   active development, though as it was extremely popular, it often comes up
+   in documentation. Popular alternatives include GRUB2, rEFInd, Syslinux,
+   systemd-boot, or EFISTUB. For various reasons, it's not recommended to use
+   software that's no longer in active development.
+
+ - Chances are your distribution includes an install script and running
+   ``make install`` will be all that's needed. Should that not be the case
+   you'll have to identify your bootloader and reference its documentation or
+   configure your EFI.
+
+Legacy LILO Instructions
+------------------------
+
 
-   If you boot Linux from the hard drive, chances are you use LILO, which
-   uses the kernel image as specified in the file /etc/lilo.conf.  The
-   kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
-   /boot/bzImage.  To use the new kernel, save a copy of the old image
-   and copy the new image over the old one.  Then, you MUST RERUN LILO
-   to update the loading map! If you don't, you won't be able to boot
-   the new kernel image.
+ - If you use LILO the kernel images are specified in the file /etc/lilo.conf.
+   The kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
+   /boot/bzImage. To use the new kernel, save a copy of the old image and copy
+   the new image over the old one. Then, you MUST RERUN LILO to update the
+   loading map! If you don't, you won't be able to boot the new kernel image.
 
-   Reinstalling LILO is usually a matter of running /sbin/lilo.
-   You may wish to edit /etc/lilo.conf to specify an entry for your
-   old kernel image (say, /vmlinux.old) in case the new one does not
-   work.  See the LILO docs for more information.
+ - Reinstalling LILO is usually a matter of running /sbin/lilo. You may wish
+   to edit /etc/lilo.conf to specify an entry for your old kernel image
+   (say, /vmlinux.old) in case the new one does not work. See the LILO docs
+   for more information.
 
-   After reinstalling LILO, you should be all set.  Shutdown the system,
+ - After reinstalling LILO, you should be all set. Shutdown the system,
    reboot, and enjoy!
 
-   If you ever need to change the default root device, video mode,
-   etc. in the kernel image, use your bootloader's boot options
-   where appropriate.  No need to recompile the kernel to change
-   these parameters.
+ - If you ever need to change the default root device, video mode, etc. in the
+   kernel image, use your bootloader's boot options where appropriate. No need
+   to recompile the kernel to change these parameters.
 
  - Reboot with the new kernel and enjoy.
 
+
 If something goes wrong
 -----------------------
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
index ae646d621a8a..7d3415eea05d 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -179,7 +179,7 @@ files describing that cpuset:
  - cpuset.mem_hardwall flag:  is memory allocation hardwalled
  - cpuset.memory_pressure: measure of how much paging pressure in cpuset
  - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes
- - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - cpuset.memory_spread_slab flag: OBSOLETE. Doesn't have any function.
  - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset
  - cpuset.sched_relax_domain_level: the searching range when migrating tasks
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/cgroup-v1/hugetlb.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/cgroup-v1/hugetlb.rst
index 0fa724d82abb..493a8e386700 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/cgroup-v1/hugetlb.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/cgroup-v1/hugetlb.rst
@@ -65,10 +65,12 @@ files include::
 
 1. Page fault accounting
 
-hugetlb.<hugepagesize>.limit_in_bytes
-hugetlb.<hugepagesize>.max_usage_in_bytes
-hugetlb.<hugepagesize>.usage_in_bytes
-hugetlb.<hugepagesize>.failcnt
+::
+
+  hugetlb.<hugepagesize>.limit_in_bytes
+  hugetlb.<hugepagesize>.max_usage_in_bytes
+  hugetlb.<hugepagesize>.usage_in_bytes
+  hugetlb.<hugepagesize>.failcnt
 
 The HugeTLB controller allows users to limit the HugeTLB usage (page fault) per
 control group and enforces the limit during page fault. Since HugeTLB
@@ -82,10 +84,12 @@ getting SIGBUS.
 
 2. Reservation accounting
 
-hugetlb.<hugepagesize>.rsvd.limit_in_bytes
-hugetlb.<hugepagesize>.rsvd.max_usage_in_bytes
-hugetlb.<hugepagesize>.rsvd.usage_in_bytes
-hugetlb.<hugepagesize>.rsvd.failcnt
+::
+
+  hugetlb.<hugepagesize>.rsvd.limit_in_bytes
+  hugetlb.<hugepagesize>.rsvd.max_usage_in_bytes
+  hugetlb.<hugepagesize>.rsvd.usage_in_bytes
+  hugetlb.<hugepagesize>.rsvd.failcnt
 
 The HugeTLB controller allows to limit the HugeTLB reservations per control
 group and enforces the controller limit at reservation time and at the fault of
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/cifs/introduction.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/cifs/introduction.rst
index 53ea62906aa5..ffc6e2564dd5 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/cifs/introduction.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/cifs/introduction.rst
@@ -28,7 +28,7 @@ Introduction
   high performance safe distributed caching (leases/oplocks), optional packet
   signing, large files, Unicode support and other internationalization
   improvements. Since both Samba server and this filesystem client support the
-  CIFS Unix extensions, and the Linux client also suppors SMB3 POSIX extensions,
+  CIFS Unix extensions, and the Linux client also supports SMB3 POSIX extensions,
   the combination can provide a reasonable alternative to other network and
   cluster file systems for fileserving in some Linux to Linux environments,
   not just in Linux to Windows (or Linux to Mac) environments.
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/device-mapper/index.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/device-mapper/index.rst
index cde52cc09645..cc5aec861576 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/device-mapper/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/device-mapper/index.rst
@@ -34,6 +34,8 @@ Device Mapper
     switch
     thin-provisioning
     unstriped
+    vdo-design
+    vdo
     verity
     writecache
     zero
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/device-mapper/vdo-design.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/device-mapper/vdo-design.rst
new file mode 100644
index 000000000000..3cd59decbec0
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/device-mapper/vdo-design.rst
@@ -0,0 +1,633 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+================
+Design of dm-vdo
+================
+
+The dm-vdo (virtual data optimizer) target provides inline deduplication,
+compression, zero-block elimination, and thin provisioning. A dm-vdo target
+can be backed by up to 256TB of storage, and can present a logical size of
+up to 4PB. This target was originally developed at Permabit Technology
+Corp. starting in 2009. It was first released in 2013 and has been used in
+production environments ever since. It was made open-source in 2017 after
+Permabit was acquired by Red Hat. This document describes the design of
+dm-vdo. For usage, see vdo.rst in the same directory as this file.
+
+Because deduplication rates fall drastically as the block size increases, a
+vdo target has a maximum block size of 4K. However, it can achieve
+deduplication rates of 254:1, i.e. up to 254 copies of a given 4K block can
+reference a single 4K of actual storage. It can achieve compression rates
+of 14:1. All zero blocks consume no storage at all.
+
+Theory of Operation
+===================
+
+The design of dm-vdo is based on the idea that deduplication is a two-part
+problem. The first is to recognize duplicate data. The second is to avoid
+storing multiple copies of those duplicates. Therefore, dm-vdo has two main
+parts: a deduplication index (called UDS) that is used to discover
+duplicate data, and a data store with a reference counted block map that
+maps from logical block addresses to the actual storage location of the
+data.
+
+Zones and Threading
+-------------------
+
+Due to the complexity of data optimization, the number of metadata
+structures involved in a single write operation to a vdo target is larger
+than most other targets. Furthermore, because vdo must operate on small
+block sizes in order to achieve good deduplication rates, acceptable
+performance can only be achieved through parallelism. Therefore, vdo's
+design attempts to be lock-free.
+
+Most of a vdo's main data structures are designed to be easily divided into
+"zones" such that any given bio must only access a single zone of any zoned
+structure. Safety with minimal locking is achieved by ensuring that during
+normal operation, each zone is assigned to a specific thread, and only that
+thread will access the portion of the data structure in that zone.
+Associated with each thread is a work queue. Each bio is associated with a
+request object (the "data_vio") which will be added to a work queue when
+the next phase of its operation requires access to the structures in the
+zone associated with that queue.
+
+Another way of thinking about this arrangement is that the work queue for
+each zone has an implicit lock on the structures it manages for all its
+operations, because vdo guarantees that no other thread will alter those
+structures.
+
+Although each structure is divided into zones, this division is not
+reflected in the on-disk representation of each data structure. Therefore,
+the number of zones for each structure, and hence the number of threads,
+can be reconfigured each time a vdo target is started.
+
+The Deduplication Index
+-----------------------
+
+In order to identify duplicate data efficiently, vdo was designed to
+leverage some common characteristics of duplicate data. From empirical
+observations, we gathered two key insights. The first is that in most data
+sets with significant amounts of duplicate data, the duplicates tend to
+have temporal locality. When a duplicate appears, it is more likely that
+other duplicates will be detected, and that those duplicates will have been
+written at about the same time. This is why the index keeps records in
+temporal order. The second insight is that new data is more likely to
+duplicate recent data than it is to duplicate older data and in general,
+there are diminishing returns to looking further back in time. Therefore,
+when the index is full, it should cull its oldest records to make space for
+new ones. Another important idea behind the design of the index is that the
+ultimate goal of deduplication is to reduce storage costs. Since there is a
+trade-off between the storage saved and the resources expended to achieve
+those savings, vdo does not attempt to find every last duplicate block. It
+is sufficient to find and eliminate most of the redundancy.
+
+Each block of data is hashed to produce a 16-byte block name. An index
+record consists of this block name paired with the presumed location of
+that data on the underlying storage. However, it is not possible to
+guarantee that the index is accurate. In the most common case, this occurs
+because it is too costly to update the index when a block is over-written
+or discarded. Doing so would require either storing the block name along
+with the blocks, which is difficult to do efficiently in block-based
+storage, or reading and rehashing each block before overwriting it.
+Inaccuracy can also result from a hash collision where two different blocks
+have the same name. In practice, this is extremely unlikely, but because
+vdo does not use a cryptographic hash, a malicious workload could be
+constructed. Because of these inaccuracies, vdo treats the locations in the
+index as hints, and reads each indicated block to verify that it is indeed
+a duplicate before sharing the existing block with a new one.
+
+Records are collected into groups called chapters. New records are added to
+the newest chapter, called the open chapter. This chapter is stored in a
+format optimized for adding and modifying records, and the content of the
+open chapter is not finalized until it runs out of space for new records.
+When the open chapter fills up, it is closed and a new open chapter is
+created to collect new records.
+
+Closing a chapter converts it to a different format which is optimized for
+reading. The records are written to a series of record pages based on the
+order in which they were received. This means that records with temporal
+locality should be on a small number of pages, reducing the I/O required to
+retrieve them. The chapter also compiles an index that indicates which
+record page contains any given name. This index means that a request for a
+name can determine exactly which record page may contain that record,
+without having to load the entire chapter from storage. This index uses
+only a subset of the block name as its key, so it cannot guarantee that an
+index entry refers to the desired block name. It can only guarantee that if
+there is a record for this name, it will be on the indicated page. Closed
+chapters are read-only structures and their contents are never altered in
+any way.
+
+Once enough records have been written to fill up all the available index
+space, the oldest chapter is removed to make space for new chapters. Any
+time a request finds a matching record in the index, that record is copied
+into the open chapter. This ensures that useful block names remain available
+in the index, while unreferenced block names are forgotten over time.
+
+In order to find records in older chapters, the index also maintains a
+higher level structure called the volume index, which contains entries
+mapping each block name to the chapter containing its newest record. This
+mapping is updated as records for the block name are copied or updated,
+ensuring that only the newest record for a given block name can be found.
+An older record for a block name will no longer be found even though it has
+not been deleted from its chapter. Like the chapter index, the volume index
+uses only a subset of the block name as its key and can not definitively
+say that a record exists for a name. It can only say which chapter would
+contain the record if a record exists. The volume index is stored entirely
+in memory and is saved to storage only when the vdo target is shut down.
+
+From the viewpoint of a request for a particular block name, it will first
+look up the name in the volume index. This search will either indicate that
+the name is new, or which chapter to search. If it returns a chapter, the
+request looks up its name in the chapter index. This will indicate either
+that the name is new, or which record page to search. Finally, if it is not
+new, the request will look for its name in the indicated record page.
+This process may require up to two page reads per request (one for the
+chapter index page and one for the request page). However, recently
+accessed pages are cached so that these page reads can be amortized across
+many block name requests.
+
+The volume index and the chapter indexes are implemented using a
+memory-efficient structure called a delta index. Instead of storing the
+entire block name (the key) for each entry, the entries are sorted by name
+and only the difference between adjacent keys (the delta) is stored.
+Because we expect the hashes to be randomly distributed, the size of the
+deltas follows an exponential distribution. Because of this distribution,
+the deltas are expressed using a Huffman code to take up even less space.
+The entire sorted list of keys is called a delta list. This structure
+allows the index to use many fewer bytes per entry than a traditional hash
+table, but it is slightly more expensive to look up entries, because a
+request must read every entry in a delta list to add up the deltas in order
+to find the record it needs. The delta index reduces this lookup cost by
+splitting its key space into many sub-lists, each starting at a fixed key
+value, so that each individual list is short.
+
+The default index size can hold 64 million records, corresponding to about
+256GB of data. This means that the index can identify duplicate data if the
+original data was written within the last 256GB of writes. This range is
+called the deduplication window. If new writes duplicate data that is older
+than that, the index will not be able to find it because the records of the
+older data have been removed. This means that if an application writes a
+200 GB file to a vdo target and then immediately writes it again, the two
+copies will deduplicate perfectly. Doing the same with a 500 GB file will
+result in no deduplication, because the beginning of the file will no
+longer be in the index by the time the second write begins (assuming there
+is no duplication within the file itself).
+
+If an application anticipates a data workload that will see useful
+deduplication beyond the 256GB threshold, vdo can be configured to use a
+larger index with a correspondingly larger deduplication window. (This
+configuration can only be set when the target is created, not altered
+later. It is important to consider the expected workload for a vdo target
+before configuring it.)  There are two ways to do this.
+
+One way is to increase the memory size of the index, which also increases
+the amount of backing storage required. Doubling the size of the index will
+double the length of the deduplication window at the expense of doubling
+the storage size and the memory requirements.
+
+The other option is to enable sparse indexing. Sparse indexing increases
+the deduplication window by a factor of 10, at the expense of also
+increasing the storage size by a factor of 10. However with sparse
+indexing, the memory requirements do not increase. The trade-off is
+slightly more computation per request and a slight decrease in the amount
+of deduplication detected. For most workloads with significant amounts of
+duplicate data, sparse indexing will detect 97-99% of the deduplication
+that a standard index will detect.
+
+The vio and data_vio Structures
+-------------------------------
+
+A vio (short for Vdo I/O) is conceptually similar to a bio, with additional
+fields and data to track vdo-specific information. A struct vio maintains a
+pointer to a bio but also tracks other fields specific to the operation of
+vdo. The vio is kept separate from its related bio because there are many
+circumstances where vdo completes the bio but must continue to do work
+related to deduplication or compression.
+
+Metadata reads and writes, and other writes that originate within vdo, use
+a struct vio directly. Application reads and writes use a larger structure
+called a data_vio to track information about their progress. A struct
+data_vio contain a struct vio and also includes several other fields
+related to deduplication and other vdo features. The data_vio is the
+primary unit of application work in vdo. Each data_vio proceeds through a
+set of steps to handle the application data, after which it is reset and
+returned to a pool of data_vios for reuse.
+
+There is a fixed pool of 2048 data_vios. This number was chosen to bound
+the amount of work that is required to recover from a crash. In addition,
+benchmarks have indicated that increasing the size of the pool does not
+significantly improve performance.
+
+The Data Store
+--------------
+
+The data store is implemented by three main data structures, all of which
+work in concert to reduce or amortize metadata updates across as many data
+writes as possible.
+
+*The Slab Depot*
+
+Most of the vdo volume belongs to the slab depot. The depot contains a
+collection of slabs. The slabs can be up to 32GB, and are divided into
+three sections. Most of a slab consists of a linear sequence of 4K blocks.
+These blocks are used either to store data, or to hold portions of the
+block map (see below). In addition to the data blocks, each slab has a set
+of reference counters, using 1 byte for each data block. Finally each slab
+has a journal.
+
+Reference updates are written to the slab journal. Slab journal blocks are
+written out either when they are full, or when the recovery journal
+requests they do so in order to allow the main recovery journal (see below)
+to free up space. The slab journal is used both to ensure that the main
+recovery journal can regularly free up space, and also to amortize the cost
+of updating individual reference blocks. The reference counters are kept in
+memory and are written out, a block at a time in oldest-dirtied-order, only
+when there is a need to reclaim slab journal space. The write operations
+are performed in the background as needed so they do not add latency to
+particular I/O operations.
+
+Each slab is independent of every other. They are assigned to "physical
+zones" in round-robin fashion. If there are P physical zones, then slab n
+is assigned to zone n mod P.
+
+The slab depot maintains an additional small data structure, the "slab
+summary," which is used to reduce the amount of work needed to come back
+online after a crash. The slab summary maintains an entry for each slab
+indicating whether or not the slab has ever been used, whether all of its
+reference count updates have been persisted to storage, and approximately
+how full it is. During recovery, each physical zone will attempt to recover
+at least one slab, stopping whenever it has recovered a slab which has some
+free blocks. Once each zone has some space, or has determined that none is
+available, the target can resume normal operation in a degraded mode. Read
+and write requests can be serviced, perhaps with degraded performance,
+while the remainder of the dirty slabs are recovered.
+
+*The Block Map*
+
+The block map contains the logical to physical mapping. It can be thought
+of as an array with one entry per logical address. Each entry is 5 bytes,
+36 bits of which contain the physical block number which holds the data for
+the given logical address. The other 4 bits are used to indicate the nature
+of the mapping. Of the 16 possible states, one represents a logical address
+which is unmapped (i.e. it has never been written, or has been discarded),
+one represents an uncompressed block, and the other 14 states are used to
+indicate that the mapped data is compressed, and which of the compression
+slots in the compressed block contains the data for this logical address.
+
+In practice, the array of mapping entries is divided into "block map
+pages," each of which fits in a single 4K block. Each block map page
+consists of a header and 812 mapping entries. Each mapping page is actually
+a leaf of a radix tree which consists of block map pages at each level.
+There are 60 radix trees which are assigned to "logical zones" in round
+robin fashion. (If there are L logical zones, tree n will belong to zone n
+mod L.) At each level, the trees are interleaved, so logical addresses
+0-811 belong to tree 0, logical addresses 812-1623 belong to tree 1, and so
+on. The interleaving is maintained all the way up to the 60 root nodes.
+Choosing 60 trees results in an evenly distributed number of trees per zone
+for a large number of possible logical zone counts. The storage for the 60
+tree roots is allocated at format time. All other block map pages are
+allocated out of the slabs as needed. This flexible allocation avoids the
+need to pre-allocate space for the entire set of logical mappings and also
+makes growing the logical size of a vdo relatively easy.
+
+In operation, the block map maintains two caches. It is prohibitive to keep
+the entire leaf level of the trees in memory, so each logical zone
+maintains its own cache of leaf pages. The size of this cache is
+configurable at target start time. The second cache is allocated at start
+time, and is large enough to hold all the non-leaf pages of the entire
+block map. This cache is populated as pages are needed.
+
+*The Recovery Journal*
+
+The recovery journal is used to amortize updates across the block map and
+slab depot. Each write request causes an entry to be made in the journal.
+Entries are either "data remappings" or "block map remappings." For a data
+remapping, the journal records the logical address affected and its old and
+new physical mappings. For a block map remapping, the journal records the
+block map page number and the physical block allocated for it. Block map
+pages are never reclaimed or repurposed, so the old mapping is always 0.
+
+Each journal entry is an intent record summarizing the metadata updates
+that are required for a data_vio. The recovery journal issues a flush
+before each journal block write to ensure that the physical data for the
+new block mappings in that block are stable on storage, and journal block
+writes are all issued with the FUA bit set to ensure the recovery journal
+entries themselves are stable. The journal entry and the data write it
+represents must be stable on disk before the other metadata structures may
+be updated to reflect the operation. These entries allow the vdo device to
+reconstruct the logical to physical mappings after an unexpected
+interruption such as a loss of power.
+
+*Write Path*
+
+All write I/O to vdo is asynchronous. Each bio will be acknowledged as soon
+as vdo has done enough work to guarantee that it can complete the write
+eventually. Generally, the data for acknowledged but unflushed write I/O
+can be treated as though it is cached in memory. If an application
+requires data to be stable on storage, it must issue a flush or write the
+data with the FUA bit set like any other asynchronous I/O. Shutting down
+the vdo target will also flush any remaining I/O.
+
+Application write bios follow the steps outlined below.
+
+1.  A data_vio is obtained from the data_vio pool and associated with the
+    application bio. If there are no data_vios available, the incoming bio
+    will block until a data_vio is available. This provides back pressure
+    to the application. The data_vio pool is protected by a spin lock.
+
+    The newly acquired data_vio is reset and the bio's data is copied into
+    the data_vio if it is a write and the data is not all zeroes. The data
+    must be copied because the application bio can be acknowledged before
+    the data_vio processing is complete, which means later processing steps
+    will no longer have access to the application bio. The application bio
+    may also be smaller than 4K, in which case the data_vio will have
+    already read the underlying block and the data is instead copied over
+    the relevant portion of the larger block.
+
+2.  The data_vio places a claim (the "logical lock") on the logical address
+    of the bio. It is vital to prevent simultaneous modifications of the
+    same logical address, because deduplication involves sharing blocks.
+    This claim is implemented as an entry in a hashtable where the key is
+    the logical address and the value is a pointer to the data_vio
+    currently handling that address.
+
+    If a data_vio looks in the hashtable and finds that another data_vio is
+    already operating on that logical address, it waits until the previous
+    operation finishes. It also sends a message to inform the current
+    lock holder that it is waiting. Most notably, a new data_vio waiting
+    for a logical lock will flush the previous lock holder out of the
+    compression packer (step 8d) rather than allowing it to continue
+    waiting to be packed.
+
+    This stage requires the data_vio to get an implicit lock on the
+    appropriate logical zone to prevent concurrent modifications of the
+    hashtable. This implicit locking is handled by the zone divisions
+    described above.
+
+3.  The data_vio traverses the block map tree to ensure that all the
+    necessary internal tree nodes have been allocated, by trying to find
+    the leaf page for its logical address. If any interior tree page is
+    missing, it is allocated at this time out of the same physical storage
+    pool used to store application data.
+
+    a. If any page-node in the tree has not yet been allocated, it must be
+       allocated before the write can continue. This step requires the
+       data_vio to lock the page-node that needs to be allocated. This
+       lock, like the logical block lock in step 2, is a hashtable entry
+       that causes other data_vios to wait for the allocation process to
+       complete.
+
+       The implicit logical zone lock is released while the allocation is
+       happening, in order to allow other operations in the same logical
+       zone to proceed. The details of allocation are the same as in
+       step 4. Once a new node has been allocated, that node is added to
+       the tree using a similar process to adding a new data block mapping.
+       The data_vio journals the intent to add the new node to the block
+       map tree (step 10), updates the reference count of the new block
+       (step 11), and reacquires the implicit logical zone lock to add the
+       new mapping to the parent tree node (step 12). Once the tree is
+       updated, the data_vio proceeds down the tree. Any other data_vios
+       waiting on this allocation also proceed.
+
+    b. In the steady-state case, the block map tree nodes will already be
+       allocated, so the data_vio just traverses the tree until it finds
+       the required leaf node. The location of the mapping (the "block map
+       slot") is recorded in the data_vio so that later steps do not need
+       to traverse the tree again. The data_vio then releases the implicit
+       logical zone lock.
+
+4.  If the block is a zero block, skip to step 9. Otherwise, an attempt is
+    made to allocate a free data block. This allocation ensures that the
+    data_vio can write its data somewhere even if deduplication and
+    compression are not possible. This stage gets an implicit lock on a
+    physical zone to search for free space within that zone.
+
+    The data_vio will search each slab in a zone until it finds a free
+    block or decides there are none. If the first zone has no free space,
+    it will proceed to search the next physical zone by taking the implicit
+    lock for that zone and releasing the previous one until it finds a
+    free block or runs out of zones to search. The data_vio will acquire a
+    struct pbn_lock (the "physical block lock") on the free block. The
+    struct pbn_lock also has several fields to record the various kinds of
+    claims that data_vios can have on physical blocks. The pbn_lock is
+    added to a hashtable like the logical block locks in step 2. This
+    hashtable is also covered by the implicit physical zone lock. The
+    reference count of the free block is updated to prevent any other
+    data_vio from considering it free. The reference counters are a
+    sub-component of the slab and are thus also covered by the implicit
+    physical zone lock.
+
+5.  If an allocation was obtained, the data_vio has all the resources it
+    needs to complete the write. The application bio can safely be
+    acknowledged at this point. The acknowledgment happens on a separate
+    thread to prevent the application callback from blocking other data_vio
+    operations.
+
+    If an allocation could not be obtained, the data_vio continues to
+    attempt to deduplicate or compress the data, but the bio is not
+    acknowledged because the vdo device may be out of space.
+
+6.  At this point vdo must determine where to store the application data.
+    The data_vio's data is hashed and the hash (the "record name") is
+    recorded in the data_vio.
+
+7.  The data_vio reserves or joins a struct hash_lock, which manages all of
+    the data_vios currently writing the same data. Active hash locks are
+    tracked in a hashtable similar to the way logical block locks are
+    tracked in step 2. This hashtable is covered by the implicit lock on
+    the hash zone.
+
+    If there is no existing hash lock for this data_vio's record_name, the
+    data_vio obtains a hash lock from the pool, adds it to the hashtable,
+    and sets itself as the new hash lock's "agent." The hash_lock pool is
+    also covered by the implicit hash zone lock. The hash lock agent will
+    do all the work to decide where the application data will be
+    written. If a hash lock for the data_vio's record_name already exists,
+    and the data_vio's data is the same as the agent's data, the new
+    data_vio will wait for the agent to complete its work and then share
+    its result.
+
+    In the rare case that a hash lock exists for the data_vio's hash but
+    the data does not match the hash lock's agent, the data_vio skips to
+    step 8h and attempts to write its data directly. This can happen if two
+    different data blocks produce the same hash, for example.
+
+8.  The hash lock agent attempts to deduplicate or compress its data with
+    the following steps.
+
+    a. The agent initializes and sends its embedded deduplication request
+       (struct uds_request) to the deduplication index. This does not
+       require the data_vio to get any locks because the index components
+       manage their own locking. The data_vio waits until it either gets a
+       response from the index or times out.
+
+    b. If the deduplication index returns advice, the data_vio attempts to
+       obtain a physical block lock on the indicated physical address, in
+       order to read the data and verify that it is the same as the
+       data_vio's data, and that it can accept more references. If the
+       physical address is already locked by another data_vio, the data at
+       that address may soon be overwritten so it is not safe to use the
+       address for deduplication.
+
+    c. If the data matches and the physical block can add references, the
+       agent and any other data_vios waiting on it will record this
+       physical block as their new physical address and proceed to step 9
+       to record their new mapping. If there are more data_vios in the hash
+       lock than there are references available, one of the remaining
+       data_vios becomes the new agent and continues to step 8d as if no
+       valid advice was returned.
+
+    d. If no usable duplicate block was found, the agent first checks that
+       it has an allocated physical block (from step 3) that it can write
+       to. If the agent does not have an allocation, some other data_vio in
+       the hash lock that does have an allocation takes over as agent. If
+       none of the data_vios have an allocated physical block, these writes
+       are out of space, so they proceed to step 13 for cleanup.
+
+    e. The agent attempts to compress its data. If the data does not
+       compress, the data_vio will continue to step 8h to write its data
+       directly.
+
+       If the compressed size is small enough, the agent will release the
+       implicit hash zone lock and go to the packer (struct packer) where
+       it will be placed in a bin (struct packer_bin) along with other
+       data_vios. All compression operations require the implicit lock on
+       the packer zone.
+
+       The packer can combine up to 14 compressed blocks in a single 4k
+       data block. Compression is only helpful if vdo can pack at least 2
+       data_vios into a single data block. This means that a data_vio may
+       wait in the packer for an arbitrarily long time for other data_vios
+       to fill out the compressed block. There is a mechanism for vdo to
+       evict waiting data_vios when continuing to wait would cause
+       problems. Circumstances causing an eviction include an application
+       flush, device shutdown, or a subsequent data_vio trying to overwrite
+       the same logical block address. A data_vio may also be evicted from
+       the packer if it cannot be paired with any other compressed block
+       before more compressible blocks need to use its bin. An evicted
+       data_vio will proceed to step 8h to write its data directly.
+
+    f. If the agent fills a packer bin, either because all 14 of its slots
+       are used or because it has no remaining space, it is written out
+       using the allocated physical block from one of its data_vios. Step
+       8d has already ensured that an allocation is available.
+
+    g. Each data_vio sets the compressed block as its new physical address.
+       The data_vio obtains an implicit lock on the physical zone and
+       acquires the struct pbn_lock for the compressed block, which is
+       modified to be a shared lock. Then it releases the implicit physical
+       zone lock and proceeds to step 8i.
+
+    h. Any data_vio evicted from the packer will have an allocation from
+       step 3. It will write its data to that allocated physical block.
+
+    i. After the data is written, if the data_vio is the agent of a hash
+       lock, it will reacquire the implicit hash zone lock and share its
+       physical address with as many other data_vios in the hash lock as
+       possible. Each data_vio will then proceed to step 9 to record its
+       new mapping.
+
+    j. If the agent actually wrote new data (whether compressed or not),
+       the deduplication index is updated to reflect the location of the
+       new data. The agent then releases the implicit hash zone lock.
+
+9.  The data_vio determines the previous mapping of the logical address.
+    There is a cache for block map leaf pages (the "block map cache"),
+    because there are usually too many block map leaf nodes to store
+    entirely in memory. If the desired leaf page is not in the cache, the
+    data_vio will reserve a slot in the cache and load the desired page
+    into it, possibly evicting an older cached page. The data_vio then
+    finds the current physical address for this logical address (the "old
+    physical mapping"), if any, and records it. This step requires a lock
+    on the block map cache structures, covered by the implicit logical zone
+    lock.
+
+10. The data_vio makes an entry in the recovery journal containing the
+    logical block address, the old physical mapping, and the new physical
+    mapping. Making this journal entry requires holding the implicit
+    recovery journal lock. The data_vio will wait in the journal until all
+    recovery blocks up to the one containing its entry have been written
+    and flushed to ensure the transaction is stable on storage.
+
+11. Once the recovery journal entry is stable, the data_vio makes two slab
+    journal entries: an increment entry for the new mapping, and a
+    decrement entry for the old mapping. These two operations each require
+    holding a lock on the affected physical slab, covered by its implicit
+    physical zone lock. For correctness during recovery, the slab journal
+    entries in any given slab journal must be in the same order as the
+    corresponding recovery journal entries. Therefore, if the two entries
+    are in different zones, they are made concurrently, and if they are in
+    the same zone, the increment is always made before the decrement in
+    order to avoid underflow. After each slab journal entry is made in
+    memory, the associated reference count is also updated in memory.
+
+12. Once both of the reference count updates are done, the data_vio
+    acquires the implicit logical zone lock and updates the
+    logical-to-physical mapping in the block map to point to the new
+    physical block. At this point the write operation is complete.
+
+13. If the data_vio has a hash lock, it acquires the implicit hash zone
+    lock and releases its hash lock to the pool.
+
+    The data_vio then acquires the implicit physical zone lock and releases
+    the struct pbn_lock it holds for its allocated block. If it had an
+    allocation that it did not use, it also sets the reference count for
+    that block back to zero to free it for use by subsequent data_vios.
+
+    The data_vio then acquires the implicit logical zone lock and releases
+    the logical block lock acquired in step 2.
+
+    The application bio is then acknowledged if it has not previously been
+    acknowledged, and the data_vio is returned to the pool.
+
+*Read Path*
+
+An application read bio follows a much simpler set of steps. It does steps
+1 and 2 in the write path to obtain a data_vio and lock its logical
+address. If there is already a write data_vio in progress for that logical
+address that is guaranteed to complete, the read data_vio will copy the
+data from the write data_vio and return it. Otherwise, it will look up the
+logical-to-physical mapping by traversing the block map tree as in step 3,
+and then read and possibly decompress the indicated data at the indicated
+physical block address. A read data_vio will not allocate block map tree
+nodes if they are missing. If the interior block map nodes do not exist
+yet, the logical block map address must still be unmapped and the read
+data_vio will return all zeroes. A read data_vio handles cleanup and
+acknowledgment as in step 13, although it only needs to release the logical
+lock and return itself to the pool.
+
+*Small Writes*
+
+All storage within vdo is managed as 4KB blocks, but it can accept writes
+as small as 512 bytes. Processing a write that is smaller than 4K requires
+a read-modify-write operation that reads the relevant 4K block, copies the
+new data over the approriate sectors of the block, and then launches a
+write operation for the modified data block. The read and write stages of
+this operation are nearly identical to the normal read and write
+operations, and a single data_vio is used throughout this operation.
+
+*Recovery*
+
+When a vdo is restarted after a crash, it will attempt to recover from the
+recovery journal. During the pre-resume phase of the next start, the
+recovery journal is read. The increment portion of valid entries are played
+into the block map. Next, valid entries are played, in order as required,
+into the slab journals. Finally, each physical zone attempts to replay at
+least one slab journal to reconstruct the reference counts of one slab.
+Once each zone has some free space (or has determined that it has none),
+the vdo comes back online, while the remainder of the slab journals are
+used to reconstruct the rest of the reference counts in the background.
+
+*Read-only Rebuild*
+
+If a vdo encounters an unrecoverable error, it will enter read-only mode.
+This mode indicates that some previously acknowledged data may have been
+lost. The vdo may be instructed to rebuild as best it can in order to
+return to a writable state. However, this is never done automatically due
+to the possibility that data has been lost. During a read-only rebuild, the
+block map is recovered from the recovery journal as before. However, the
+reference counts are not rebuilt from the slab journals. Instead, the
+reference counts are zeroed, the entire block map is traversed, and the
+reference counts are updated from the block mappings. While this may lose
+some data, it ensures that the block map and reference counts are
+consistent with each other. This allows vdo to resume normal operation and
+accept further writes.
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/device-mapper/vdo.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/device-mapper/vdo.rst
new file mode 100644
index 000000000000..7e1ecafdf91e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/device-mapper/vdo.rst
@@ -0,0 +1,406 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+dm-vdo
+======
+
+The dm-vdo (virtual data optimizer) device mapper target provides
+block-level deduplication, compression, and thin provisioning. As a device
+mapper target, it can add these features to the storage stack, compatible
+with any file system. The vdo target does not protect against data
+corruption, relying instead on integrity protection of the storage below
+it. It is strongly recommended that lvm be used to manage vdo volumes. See
+lvmvdo(7).
+
+Userspace component
+===================
+
+Formatting a vdo volume requires the use of the 'vdoformat' tool, available
+at:
+
+https://github.com/dm-vdo/vdo/
+
+In most cases, a vdo target will recover from a crash automatically the
+next time it is started. In cases where it encountered an unrecoverable
+error (either during normal operation or crash recovery) the target will
+enter or come up in read-only mode. Because read-only mode is indicative of
+data-loss, a positive action must be taken to bring vdo out of read-only
+mode. The 'vdoforcerebuild' tool, available from the same repo, is used to
+prepare a read-only vdo to exit read-only mode. After running this tool,
+the vdo target will rebuild its metadata the next time it is
+started. Although some data may be lost, the rebuilt vdo's metadata will be
+internally consistent and the target will be writable again.
+
+The repo also contains additional userspace tools which can be used to
+inspect a vdo target's on-disk metadata. Fortunately, these tools are
+rarely needed except by dm-vdo developers.
+
+Metadata requirements
+=====================
+
+Each vdo volume reserves 3GB of space for metadata, or more depending on
+its configuration. It is helpful to check that the space saved by
+deduplication and compression is not cancelled out by the metadata
+requirements. An estimation of the space saved for a specific dataset can
+be computed with the vdo estimator tool, which is available at:
+
+https://github.com/dm-vdo/vdoestimator/
+
+Target interface
+================
+
+Table line
+----------
+
+::
+
+	<offset> <logical device size> vdo V4 <storage device>
+	<storage device size> <minimum I/O size> <block map cache size>
+	<block map era length> [optional arguments]
+
+
+Required parameters:
+
+	offset:
+		The offset, in sectors, at which the vdo volume's logical
+		space begins.
+
+	logical device size:
+		The size of the device which the vdo volume will service,
+		in sectors. Must match the current logical size of the vdo
+		volume.
+
+	storage device:
+		The device holding the vdo volume's data and metadata.
+
+	storage device size:
+		The size of the device holding the vdo volume, as a number
+		of 4096-byte blocks. Must match the current size of the vdo
+		volume.
+
+	minimum I/O size:
+		The minimum I/O size for this vdo volume to accept, in
+		bytes. Valid values are 512 or 4096. The recommended value
+		is 4096.
+
+	block map cache size:
+		The size of the block map cache, as a number of 4096-byte
+		blocks. The minimum and recommended value is 32768 blocks.
+		If the logical thread count is non-zero, the cache size
+		must be at least 4096 blocks per logical thread.
+
+	block map era length:
+		The speed with which the block map cache writes out
+		modified block map pages. A smaller era length is likely to
+		reduce the amount of time spent rebuilding, at the cost of
+		increased block map writes during normal operation. The
+		maximum and recommended value is 16380; the minimum value
+		is 1.
+
+Optional parameters:
+--------------------
+Some or all of these parameters may be specified as <key> <value> pairs.
+
+Thread related parameters:
+
+Different categories of work are assigned to separate thread groups, and
+the number of threads in each group can be configured separately.
+
+If <hash>, <logical>, and <physical> are all set to 0, the work handled by
+all three thread types will be handled by a single thread. If any of these
+values are non-zero, all of them must be non-zero.
+
+	ack:
+		The number of threads used to complete bios. Since
+		completing a bio calls an arbitrary completion function
+		outside the vdo volume, threads of this type allow the vdo
+		volume to continue processing requests even when bio
+		completion is slow. The default is 1.
+
+	bio:
+		The number of threads used to issue bios to the underlying
+		storage. Threads of this type allow the vdo volume to
+		continue processing requests even when bio submission is
+		slow. The default is 4.
+
+	bioRotationInterval:
+		The number of bios to enqueue on each bio thread before
+		switching to the next thread. The value must be greater
+		than 0 and not more than 1024; the default is 64.
+
+	cpu:
+		The number of threads used to do CPU-intensive work, such
+		as hashing and compression. The default is 1.
+
+	hash:
+		The number of threads used to manage data comparisons for
+		deduplication based on the hash value of data blocks. The
+		default is 0.
+
+	logical:
+		The number of threads used to manage caching and locking
+		based on the logical address of incoming bios. The default
+		is 0; the maximum is 60.
+
+	physical:
+		The number of threads used to manage administration of the
+		underlying storage device. At format time, a slab size for
+		the vdo is chosen; the vdo storage device must be large
+		enough to have at least 1 slab per physical thread. The
+		default is 0; the maximum is 16.
+
+Miscellaneous parameters:
+
+	maxDiscard:
+		The maximum size of discard bio accepted, in 4096-byte
+		blocks. I/O requests to a vdo volume are normally split
+		into 4096-byte blocks, and processed up to 2048 at a time.
+		However, discard requests to a vdo volume can be
+		automatically split to a larger size, up to <maxDiscard>
+		4096-byte blocks in a single bio, and are limited to 1500
+		at a time. Increasing this value may provide better overall
+		performance, at the cost of increased latency for the
+		individual discard requests. The default and minimum is 1;
+		the maximum is UINT_MAX / 4096.
+
+	deduplication:
+		Whether deduplication is enabled. The default is 'on'; the
+		acceptable values are 'on' and 'off'.
+
+	compression:
+		Whether compression is enabled. The default is 'off'; the
+		acceptable values are 'on' and 'off'.
+
+Device modification
+-------------------
+
+A modified table may be loaded into a running, non-suspended vdo volume.
+The modifications will take effect when the device is next resumed. The
+modifiable parameters are <logical device size>, <physical device size>,
+<maxDiscard>, <compression>, and <deduplication>.
+
+If the logical device size or physical device size are changed, upon
+successful resume vdo will store the new values and require them on future
+startups. These two parameters may not be decreased. The logical device
+size may not exceed 4 PB. The physical device size must increase by at
+least 32832 4096-byte blocks if at all, and must not exceed the size of the
+underlying storage device. Additionally, when formatting the vdo device, a
+slab size is chosen: the physical device size may never increase above the
+size which provides 8192 slabs, and each increase must be large enough to
+add at least one new slab.
+
+Examples:
+
+Start a previously-formatted vdo volume with 1 GB logical space and 1 GB
+physical space, storing to /dev/dm-1 which has more than 1 GB of space.
+
+::
+
+	dmsetup create vdo0 --table \
+	"0 2097152 vdo V4 /dev/dm-1 262144 4096 32768 16380"
+
+Grow the logical size to 4 GB.
+
+::
+
+	dmsetup reload vdo0 --table \
+	"0 8388608 vdo V4 /dev/dm-1 262144 4096 32768 16380"
+	dmsetup resume vdo0
+
+Grow the physical size to 2 GB.
+
+::
+
+	dmsetup reload vdo0 --table \
+	"0 8388608 vdo V4 /dev/dm-1 524288 4096 32768 16380"
+	dmsetup resume vdo0
+
+Grow the physical size by 1 GB more and increase max discard sectors.
+
+::
+
+	dmsetup reload vdo0 --table \
+	"0 10485760 vdo V4 /dev/dm-1 786432 4096 32768 16380 maxDiscard 8"
+	dmsetup resume vdo0
+
+Stop the vdo volume.
+
+::
+
+	dmsetup remove vdo0
+
+Start the vdo volume again. Note that the logical and physical device sizes
+must still match, but other parameters can change.
+
+::
+
+	dmsetup create vdo1 --table \
+	"0 10485760 vdo V4 /dev/dm-1 786432 512 65550 5000 hash 1 logical 3 physical 2"
+
+Messages
+--------
+All vdo devices accept messages in the form:
+
+::
+        dmsetup message <target-name> 0 <message-name> <message-parameters>
+
+The messages are:
+
+        stats:
+		Outputs the current view of the vdo statistics. Mostly used
+		by the vdostats userspace program to interpret the output
+		buffer.
+
+        dump:
+		Dumps many internal structures to the system log. This is
+		not always safe to run, so it should only be used to debug
+		a hung vdo. Optional parameters to specify structures to
+		dump are:
+
+			viopool: The pool of I/O requests incoming bios
+			pools: A synonym of 'viopool'
+			vdo: Most of the structures managing on-disk data
+			queues: Basic information about each vdo thread
+			threads: A synonym of 'queues'
+			default: Equivalent to 'queues vdo'
+			all: All of the above.
+
+        dump-on-shutdown:
+		Perform a default dump next time vdo shuts down.
+
+
+Status
+------
+
+::
+
+    <device> <operating mode> <in recovery> <index state>
+    <compression state> <physical blocks used> <total physical blocks>
+
+	device:
+		The name of the vdo volume.
+
+	operating mode:
+		The current operating mode of the vdo volume; values may be
+		'normal', 'recovering' (the volume has detected an issue
+		with its metadata and is attempting to repair itself), and
+		'read-only' (an error has occurred that forces the vdo
+		volume to only support read operations and not writes).
+
+	in recovery:
+		Whether the vdo volume is currently in recovery mode;
+		values may be 'recovering' or '-' which indicates not
+		recovering.
+
+	index state:
+		The current state of the deduplication index in the vdo
+		volume; values may be 'closed', 'closing', 'error',
+		'offline', 'online', 'opening', and 'unknown'.
+
+	compression state:
+		The current state of compression in the vdo volume; values
+		may be 'offline' and 'online'.
+
+	used physical blocks:
+		The number of physical blocks in use by the vdo volume.
+
+	total physical blocks:
+		The total number of physical blocks the vdo volume may use;
+		the difference between this value and the
+		<used physical blocks> is the number of blocks the vdo
+		volume has left before being full.
+
+Memory Requirements
+===================
+
+A vdo target requires a fixed 38 MB of RAM along with the following amounts
+that scale with the target:
+
+- 1.15 MB of RAM for each 1 MB of configured block map cache size. The
+  block map cache requires a minimum of 150 MB.
+- 1.6 MB of RAM for each 1 TB of logical space.
+- 268 MB of RAM for each 1 TB of physical storage managed by the volume.
+
+The deduplication index requires additional memory which scales with the
+size of the deduplication window. For dense indexes, the index requires 1
+GB of RAM per 1 TB of window. For sparse indexes, the index requires 1 GB
+of RAM per 10 TB of window. The index configuration is set when the target
+is formatted and may not be modified.
+
+Module Parameters
+=================
+
+The vdo driver has a numeric parameter 'log_level' which controls the
+verbosity of logging from the driver. The default setting is 6
+(LOGLEVEL_INFO and more severe messages).
+
+Run-time Usage
+==============
+
+When using dm-vdo, it is important to be aware of the ways in which its
+behavior differs from other storage targets.
+
+- There is no guarantee that over-writes of existing blocks will succeed.
+  Because the underlying storage may be multiply referenced, over-writing
+  an existing block generally requires a vdo to have a free block
+  available.
+
+- When blocks are no longer in use, sending a discard request for those
+  blocks lets the vdo release references for those blocks. If the vdo is
+  thinly provisioned, discarding unused blocks is essential to prevent the
+  target from running out of space. However, due to the sharing of
+  duplicate blocks, no discard request for any given logical block is
+  guaranteed to reclaim space.
+
+- Assuming the underlying storage properly implements flush requests, vdo
+  is resilient against crashes, however, unflushed writes may or may not
+  persist after a crash.
+
+- Each write to a vdo target entails a significant amount of processing.
+  However, much of the work is paralellizable. Therefore, vdo targets
+  achieve better throughput at higher I/O depths, and can support up 2048
+  requests in parallel.
+
+Tuning
+======
+
+The vdo device has many options, and it can be difficult to make optimal
+choices without perfect knowledge of the workload. Additionally, most
+configuration options must be set when a vdo target is started, and cannot
+be changed without shutting it down completely; the configuration cannot be
+changed while the target is active. Ideally, tuning with simulated
+workloads should be performed before deploying vdo in production
+environments.
+
+The most important value to adjust is the block map cache size. In order to
+service a request for any logical address, a vdo must load the portion of
+the block map which holds the relevant mapping. These mappings are cached.
+Performance will suffer when the working set does not fit in the cache. By
+default, a vdo allocates 128 MB of metadata cache in RAM to support
+efficient access to 100 GB of logical space at a time. It should be scaled
+up proportionally for larger working sets.
+
+The logical and physical thread counts should also be adjusted. A logical
+thread controls a disjoint section of the block map, so additional logical
+threads increase parallelism and can increase throughput. Physical threads
+control a disjoint section of the data blocks, so additional physical
+threads can also increase throughput. However, excess threads can waste
+resources and increase contention.
+
+Bio submission threads control the parallelism involved in sending I/O to
+the underlying storage; fewer threads mean there is more opportunity to
+reorder I/O requests for performance benefit, but also that each I/O
+request has to wait longer before being submitted.
+
+Bio acknowledgment threads are used for finishing I/O requests. This is
+done on dedicated threads since the amount of work required to execute a
+bio's callback can not be controlled by the vdo itself. Usually one thread
+is sufficient but additional threads may be beneficial, particularly when
+bios have CPU-heavy callbacks.
+
+CPU threads are used for hashing and for compression; in workloads with
+compression enabled, more threads may result in higher throughput.
+
+Hash threads are used to sort active requests by hash and determine whether
+they should deduplicate; the most CPU intensive actions done by these
+threads are comparison of 4096-byte data blocks. In most cases, a single
+hash thread is sufficient.
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/edid.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/edid.rst
index 80deeb21a265..1a9b965aa486 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/edid.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/edid.rst
@@ -24,37 +24,4 @@ restrictions later on.
 As a remedy for such situations, the kernel configuration item
 CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
-directory from where it is loaded via the firmware interface. The code
-(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
-1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
-not contain code to create these data. In order to elucidate the origin
-of the built-in binary EDID blobs and to facilitate the creation of
-individual data for a specific misbehaving monitor, commented sources
-and a Makefile environment are given here.
-
-To create binary EDID and C source code files from the existing data
-material, simply type "make" in tools/edid/.
-
-If you want to create your own EDID file, copy the file 1024x768.S,
-replace the settings with your own data and add a new target to the
-Makefile. Please note that the EDID data structure expects the timing
-values in a different way as compared to the standard X11 format.
-
-X11:
-  HTimings:
-    hdisp hsyncstart hsyncend htotal
-  VTimings:
-    vdisp vsyncstart vsyncend vtotal
-
-EDID::
-
-  #define XPIX hdisp
-  #define XBLANK htotal-hdisp
-  #define XOFFSET hsyncstart-hdisp
-  #define XPULSE hsyncend-hsyncstart
-
-  #define YPIX vdisp
-  #define YBLANK vtotal-vdisp
-  #define YOFFSET vsyncstart-vdisp
-  #define YPULSE vsyncend-vsyncstart
+directory from where it is loaded via the firmware interface.
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst
index 493071da1738..d6e7438a7550 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/gpio/gpio-mockup.rst
@@ -3,6 +3,14 @@
 GPIO Testing Driver
 ===================
 
+.. note::
+
+   This module has been obsoleted by the more flexible gpio-sim.rst.
+   New developments should use that API and existing developments are
+   encouraged to migrate as soon as possible.
+   This module will continue to be maintained but no new features will be
+   added.
+
 The GPIO Testing Driver (gpio-mockup) provides a way to create simulated GPIO
 chips for testing purposes. The lines exposed by these chips can be accessed
 using the standard GPIO character device interface as well as manipulated
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/gpio/index.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/gpio/index.rst
index f6861ca16ffe..460afd29617e 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/gpio/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/gpio/index.rst
@@ -1,16 +1,16 @@
 .. SPDX-License-Identifier: GPL-2.0
 
 ====
-gpio
+GPIO
 ====
 
 .. toctree::
     :maxdepth: 1
 
+    Character Device Userspace API <../../userspace-api/gpio/chardev>
     gpio-aggregator
-    sysfs
-    gpio-mockup
     gpio-sim
+    Obsolete APIs <obsolete>
 
 .. only::  subproject and html
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/gpio/obsolete.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/gpio/obsolete.rst
new file mode 100644
index 000000000000..5adbff02d61f
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/gpio/obsolete.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+Obsolete GPIO APIs
+==================
+
+.. toctree::
+    :maxdepth: 1
+
+    Character Device Userspace API (v1) <../../userspace-api/gpio/chardev_v1>
+    Sysfs Interface <../../userspace-api/gpio/sysfs>
+    Mockup Testing Module <gpio-mockup>
+
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/hw-vuln/index.rst
index de99caabf65a..ff0b440ef2dc 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -21,3 +21,4 @@ are configurable at compile, boot or run time.
    cross-thread-rsb
    srso
    gather_data_sampling
+   reg-file-data-sampling
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..0585d02b9a6c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ATOM_GRACEMONT          06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index 32a8893e5617..25a04cda4c2c 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -138,11 +138,10 @@ associated with the source address of the indirect branch. Specifically,
 the BHB might be shared across privilege levels even in the presence of
 Enhanced IBRS.
 
-Currently the only known real-world BHB attack vector is via
-unprivileged eBPF. Therefore, it's highly recommended to not enable
-unprivileged eBPF, especially when eIBRS is used (without retpolines).
-For a full mitigation against BHB attacks, it's recommended to use
-retpolines (or eIBRS combined with retpolines).
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
 
 Attack scenarios
 ----------------
@@ -430,6 +429,23 @@ The possible values in this file are:
   'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
   ===========================  =======================================================
 
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -473,8 +489,8 @@ Spectre variant 2
    -mindirect-branch=thunk-extern -mindirect-branch-register options.
    If the kernel is compiled with a Clang compiler, the compiler needs
    to support -mretpoline-external-thunk option.  The kernel config
-   CONFIG_RETPOLINE needs to be turned on, and the CPU needs to run with
-   the latest updated microcode.
+   CONFIG_MITIGATION_RETPOLINE needs to be turned on, and the CPU needs
+   to run with the latest updated microcode.
 
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
@@ -484,7 +500,11 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks.
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
 
    On Intel's enhanced IBRS systems, this includes cross-thread branch target
    injections on SMT systems (STIBP). In other words, Intel eIBRS enables
@@ -609,8 +629,8 @@ kernel command line.
 		Selecting 'on' will, and 'auto' may, choose a
 		mitigation method at run time according to the
 		CPU, the available microcode, the setting of the
-		CONFIG_RETPOLINE configuration option, and the
-		compiler with which the kernel was built.
+		CONFIG_MITIGATION_RETPOLINE configuration option,
+		and the compiler with which the kernel was built.
 
 		Selecting 'on' will also enable the mitigation
 		against user space to user space task attacks.
@@ -638,6 +658,18 @@ kernel command line.
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 
 Mitigation selection guide
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/index.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/index.rst
index fb40a1f6f79e..32ea52f1d150 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/index.rst
@@ -1,3 +1,4 @@
+=================================================
 The Linux kernel user's and administrator's guide
 =================================================
 
@@ -37,6 +38,7 @@ problems and bugs in particular.
    reporting-issues
    reporting-regressions
    quickly-build-trimmed-linux
+   verify-bugs-and-bisect-regressions
    bug-hunting
    bug-bisect
    tainted-kernels
@@ -122,7 +124,7 @@ configure specific aspects of kernel behavior to your liking.
    pmf
    pnp
    rapidio
-   ras
+   RAS/index
    rtc
    serial-console
    svga
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/kdump/kdump.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kdump/kdump.rst
index 5762e7477a0c..0302a93b1d40 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/kdump/kdump.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kdump/kdump.rst
@@ -191,9 +191,7 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
    CPU is enough for kdump kernel to dump vmcore on most of systems.
 
    However, you can also specify nr_cpus=X to enable multiple processors
-   in kdump kernel. In this case, "disable_cpu_apicid=" is needed to
-   tell kdump kernel which cpu is 1st kernel's BSP. Please refer to
-   admin-guide/kernel-parameters.txt for more details.
+   in kdump kernel.
 
    With CONFIG_SMP=n, the above things are not related.
 
@@ -454,8 +452,7 @@ Notes on loading the dump-capture kernel:
   to use multi-thread programs with it, such as parallel dump feature of
   makedumpfile. Otherwise, the multi-thread program may have a great
   performance degradation. To enable multi-cpu support, you should bring up an
-  SMP dump-capture kernel and specify maxcpus/nr_cpus, disable_cpu_apicid=[X]
-  options while loading it.
+  SMP dump-capture kernel and specify maxcpus/nr_cpus options while loading it.
 
 * For s390x there are two kdump modes: If a ELF header is specified with
   the elfcorehdr= kernel parameter, it is used by the kdump kernel as it
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index bced9e4b6e08..0f714fc945ac 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -65,11 +65,11 @@ Defines the beginning of the text section. In general, _stext indicates
 the kernel start address. Used to convert a virtual address from the
 direct kernel map to a physical address.
 
-vmap_area_list
---------------
+VMALLOC_START
+-------------
 
-Stores the virtual area list. makedumpfile gets the vmalloc start value
-from this variable and its value is necessary for vmalloc translation.
+Stores the base address of vmalloc area. makedumpfile gets this value
+since is necessary for vmalloc translation.
 
 mem_map
 -------
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kernel-parameters.rst
index 4410384596a9..e8bdf5e86a9b 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kernel-parameters.rst
@@ -108,6 +108,7 @@ is applicable::
 	CMA	Contiguous Memory Area support is enabled.
 	DRM	Direct Rendering Management support is enabled.
 	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
+	EARLY	Parameter processed too early to be embedded in initrd.
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EVM	Extended Verification Module
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kernel-parameters.txt
index 31b3a25680d0..213d0719e2b7 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -9,7 +9,7 @@
 			accept_memory=eager can be used to accept all memory
 			at once during boot.
 
-	acpi=		[HW,ACPI,X86,ARM64,RISCV64]
+	acpi=		[HW,ACPI,X86,ARM64,RISCV64,EARLY]
 			Advanced Configuration and Power Interface
 			Format: { force | on | off | strict | noirq | rsdt |
 				  copy_dsdt }
@@ -26,7 +26,7 @@
 
 			See also Documentation/power/runtime_pm.rst, pci=noacpi
 
-	acpi_apic_instance=	[ACPI, IOAPIC]
+	acpi_apic_instance=	[ACPI,IOAPIC,EARLY]
 			Format: <int>
 			2: use 2nd APIC table, if available
 			1,0: use 1st APIC table
@@ -41,7 +41,7 @@
 			If set to native, use the device's native backlight mode.
 			If set to none, disable the ACPI backlight interface.
 
-	acpi_force_32bit_fadt_addr
+	acpi_force_32bit_fadt_addr [ACPI,EARLY]
 			force FADT to use 32 bit addresses rather than the
 			64 bit X_* addresses. Some firmware have broken 64
 			bit addresses for force ACPI ignore these and use
@@ -97,7 +97,7 @@
 			no: ACPI OperationRegions are not marked as reserved,
 			no further checks are performed.
 
-	acpi_force_table_verification	[HW,ACPI]
+	acpi_force_table_verification	[HW,ACPI,EARLY]
 			Enable table checksum verification during early stage.
 			By default, this is disabled due to x86 early mapping
 			size limitation.
@@ -137,7 +137,7 @@
 	acpi_no_memhotplug [ACPI] Disable memory hotplug.  Useful for kdump
 			   kernels.
 
-	acpi_no_static_ssdt	[HW,ACPI]
+	acpi_no_static_ssdt	[HW,ACPI,EARLY]
 			Disable installation of static SSDTs at early boot time
 			By default, SSDTs contained in the RSDT/XSDT will be
 			installed automatically and they will appear under
@@ -151,7 +151,7 @@
 			Ignore the ACPI-based watchdog interface (WDAT) and let
 			a native driver control the watchdog device instead.
 
-	acpi_rsdp=	[ACPI,EFI,KEXEC]
+	acpi_rsdp=	[ACPI,EFI,KEXEC,EARLY]
 			Pass the RSDP address to the kernel, mostly used
 			on machines running EFI runtime service to boot the
 			second kernel for kdump.
@@ -228,10 +228,10 @@
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
 
-	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
+	acpi_sci=	[HW,ACPI,EARLY] ACPI System Control Interrupt trigger mode
 			Format: { level | edge | high | low }
 
-	acpi_skip_timer_override [HW,ACPI]
+	acpi_skip_timer_override [HW,ACPI,EARLY]
 			Recognize and ignore IRQ0/pin2 Interrupt Override.
 			For broken nForce2 BIOS resulting in XT-PIC timer.
 
@@ -266,11 +266,11 @@
 			behave incorrectly in some ways with respect to system
 			suspend and resume to be ignored (use wisely).
 
-	acpi_use_timer_override [HW,ACPI]
+	acpi_use_timer_override [HW,ACPI,EARLY]
 			Use timer override. For some broken Nvidia NF5 boards
 			that require a timer override, but don't have HPET
 
-	add_efi_memmap	[EFI; X86] Include EFI memory map in
+	add_efi_memmap	[EFI,X86,EARLY] Include EFI memory map in
 			kernel's map of available physical RAM.
 
 	agp=		[AGP]
@@ -307,7 +307,7 @@
 			do not want to use tracing_snapshot_alloc() as it needs
 			to be done where GFP_KERNEL allocations are allowed.
 
-	allow_mismatched_32bit_el0 [ARM64]
+	allow_mismatched_32bit_el0 [ARM64,EARLY]
 			Allow execve() of 32-bit applications and setting of the
 			PER_LINUX32 personality on systems where only a strict
 			subset of the CPUs support 32-bit EL0. When this
@@ -351,7 +351,7 @@
 			             This mode requires kvm-amd.avic=1.
 			             (Default when IOMMU HW support is present.)
 
-	amd_pstate=	[X86]
+	amd_pstate=	[X86,EARLY]
 			disable
 			  Do not enable amd_pstate as the default
 			  scaling driver for the supported processors
@@ -374,6 +374,11 @@
 			  selects a performance level in this range and appropriate
 			  to the current workload.
 
+	amd_prefcore=
+			[X86]
+			disable
+			  Disable amd-pstate preferred core.
+
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -391,7 +396,7 @@
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,X86] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86,EARLY] Advanced Programmable Interrupt Controller
 			Change the output verbosity while booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
@@ -401,7 +406,7 @@
 			Format: apic=driver_name
 			Examples: apic=bigsmp
 
-	apic_extnmi=	[APIC,X86] External NMI delivery setting
+	apic_extnmi=	[APIC,X86,EARLY] External NMI delivery setting
 			Format: { bsp (default) | all | none }
 			bsp:  External NMI is delivered only to CPU 0
 			all:  External NMIs are broadcast to all CPUs as a
@@ -508,21 +513,22 @@
 	bert_disable	[ACPI]
 			Disable BERT OS support on buggy BIOSes.
 
-	bgrt_disable	[ACPI][X86]
+	bgrt_disable	[ACPI,X86,EARLY]
 			Disable BGRT to avoid flickering OEM logo.
 
 	blkdevparts=	Manual partition parsing of block device(s) for
 			embedded devices based on command line input.
 			See Documentation/block/cmdline-partition.rst
 
-	boot_delay=	Milliseconds to delay each printk during boot.
+	boot_delay=	[KNL,EARLY]
+			Milliseconds to delay each printk during boot.
 			Only works if CONFIG_BOOT_PRINTK_DELAY is enabled,
 			and you may also have to specify "lpj=".  Boot_delay
 			values larger than 10 seconds (10000) are assumed
 			erroneous and ignored.
 			Format: integer
 
-	bootconfig	[KNL]
+	bootconfig	[KNL,EARLY]
 			Extended command line options can be added to an initrd
 			and this will cause the kernel to look for it.
 
@@ -557,7 +563,7 @@
 			trust validation.
 			format: { id:<keyid> | builtin }
 
-	cca=		[MIPS] Override the kernel pages' cache coherency
+	cca=		[MIPS,EARLY] Override the kernel pages' cache coherency
 			algorithm.  Accepted values range from 0 to 7
 			inclusive. See arch/mips/include/asm/pgtable-bits.h
 			for platform specific values (SB1, Loongson3 and
@@ -672,19 +678,13 @@
 			[X86-64] hpet,tsc
 
 	clocksource.arm_arch_timer.evtstrm=
-			[ARM,ARM64]
+			[ARM,ARM64,EARLY]
 			Format: <bool>
 			Enable/disable the eventstream feature of the ARM
 			architected timer so that code using WFE-based polling
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to two retries, that is,
-			three attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -702,7 +702,7 @@
 			10 seconds when built into the kernel.
 
 	cma=nn[MG]@[start[MG][-end[MG]]]
-			[KNL,CMA]
+			[KNL,CMA,EARLY]
 			Sets the size of kernel global memory area for
 			contiguous memory allocations and optionally the
 			placement constraint by the physical address range of
@@ -711,7 +711,7 @@
 			kernel/dma/contiguous.c
 
 	cma_pernuma=nn[MG]
-			[KNL,CMA]
+			[KNL,CMA,EARLY]
 			Sets the size of kernel per-numa memory area for
 			contiguous memory allocations. A value of 0 disables
 			per-numa CMA altogether. And If this option is not
@@ -722,7 +722,7 @@
 			they will fallback to the global default memory area.
 
 	numa_cma=<node>:nn[MG][,<node>:nn[MG]]
-			[KNL,CMA]
+			[KNL,CMA,EARLY]
 			Sets the size of kernel numa memory area for
 			contiguous memory allocations. It will reserve CMA
 			area for the specified node.
@@ -739,7 +739,7 @@
 			a hypervisor.
 			Default: yes
 
-	coherent_pool=nn[KMG]	[ARM,KNL]
+	coherent_pool=nn[KMG]	[ARM,KNL,EARLY]
 			Sets the size of memory pool for coherent, atomic dma
 			allocations, by default set to 256K.
 
@@ -757,7 +757,7 @@
 	condev=		[HW,S390] console device
 	conmode=
 
-	con3215_drop=	[S390] 3215 console drop mode.
+	con3215_drop=	[S390,EARLY] 3215 console drop mode.
 			Format: y|n|Y|N|1|0
 			When set to true, drop data on the 3215 console when
 			the console buffer is full. In this case the
@@ -863,7 +863,7 @@
 			kernel before the cpufreq driver probes.
 
 	cpu_init_udelay=N
-			[X86] Delay for N microsec between assert and de-assert
+			[X86,EARLY] Delay for N microsec between assert and de-assert
 			of APIC INIT to start processors.  This delay occurs
 			on every CPU online, such as boot, and resume from suspend.
 			Default: 10000
@@ -883,7 +883,7 @@
 			kernel more unstable.
 
 	crashkernel=size[KMG][@offset[KMG]]
-			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			[KNL,EARLY] Using kexec, Linux can switch to a 'crash kernel'
 			upon panic. This parameter reserves the physical
 			memory region [offset, offset + size] for that kernel
 			image. If '@offset' is omitted, then a suitable offset
@@ -954,10 +954,10 @@
 			Format: <port#>,<type>
 			See also Documentation/input/devices/joystick-parport.rst
 
-	debug		[KNL] Enable kernel debugging (events log level).
+	debug		[KNL,EARLY] Enable kernel debugging (events log level).
 
 	debug_boot_weak_hash
-			[KNL] Enable printing [hashed] pointers early in the
+			[KNL,EARLY] Enable printing [hashed] pointers early in the
 			boot sequence.  If enabled, we use a weak hash instead
 			of siphash to hash pointers.  Use this option if you are
 			seeing instances of '(___ptrval___)') and need to see a
@@ -974,10 +974,10 @@
 			will print _a_lot_ more information - normally only
 			useful to lockdep developers.
 
-	debug_objects	[KNL] Enable object debugging
+	debug_objects	[KNL,EARLY] Enable object debugging
 
 	debug_guardpage_minorder=
-			[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
+			[KNL,EARLY] When CONFIG_DEBUG_PAGEALLOC is set, this
 			parameter allows control of the order of pages that will
 			be intentionally kept free (and hence protected) by the
 			buddy allocator. Bigger value increase the probability
@@ -996,7 +996,7 @@
 			help tracking down these problems.
 
 	debug_pagealloc=
-			[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this parameter
+			[KNL,EARLY] When CONFIG_DEBUG_PAGEALLOC is set, this parameter
 			enables the feature at boot time. By default, it is
 			disabled and the system will work mostly the same as a
 			kernel built without CONFIG_DEBUG_PAGEALLOC.
@@ -1004,8 +1004,8 @@
 			useful to also enable the page_owner functionality.
 			on: enable the feature
 
-	debugfs=    	[KNL] This parameter enables what is exposed to userspace
-			and debugfs internal clients.
+	debugfs=    	[KNL,EARLY] This parameter enables what is exposed to
+			userspace and debugfs internal clients.
 			Format: { on, no-mount, off }
 			on: 	All functions are enabled.
 			no-mount:
@@ -1084,7 +1084,7 @@
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 
-	disable_1tb_segments [PPC]
+	disable_1tb_segments [PPC,EARLY]
 			Disables the use of 1TB hash page table segments. This
 			causes the kernel to fall back to 256MB segments which
 			can be useful when debugging issues that require an SLB
@@ -1093,41 +1093,32 @@
 	disable=	[IPV6]
 			See Documentation/networking/ipv6.rst.
 
-	disable_radix	[PPC]
+	disable_radix	[PPC,EARLY]
 			Disable RADIX MMU mode on POWER9
 
 	disable_tlbie	[PPC]
 			Disable TLBIE instruction. Currently does not work
 			with KVM, with HASH MMU, or with coherent accelerators.
 
-	disable_cpu_apicid= [X86,APIC,SMP]
-			Format: <int>
-			The number of initial APIC ID for the
-			corresponding CPU to be disabled at boot,
-			mostly used for the kdump 2nd kernel to
-			disable BSP to wake up multiple CPUs without
-			causing system reset or hang due to sending
-			INIT from AP to BSP.
-
-	disable_ddw	[PPC/PSERIES]
+	disable_ddw	[PPC/PSERIES,EARLY]
 			Disable Dynamic DMA Window support. Use this
 			to workaround buggy firmware.
 
 	disable_ipv6=	[IPV6]
 			See Documentation/networking/ipv6.rst.
 
-	disable_mtrr_cleanup [X86]
+	disable_mtrr_cleanup [X86,EARLY]
 			The kernel tries to adjust MTRR layout from continuous
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter disables that.
 
-	disable_mtrr_trim [X86, Intel and AMD only]
+	disable_mtrr_trim [X86, Intel and AMD only,EARLY]
 			By default the kernel will trim any uncacheable
 			memory out of your available memory pool based on
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [X86]
+	disable_timer_pin_1 [X86,EARLY]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -1150,6 +1141,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously. *
 			matches with all driver names. If * is specified, the
@@ -1162,22 +1173,16 @@
 			panels may send no or incorrect EDID data sets.
 			This parameter allows to specify an EDID data sets
 			in the /lib/firmware directory that are used instead.
-			Generic built-in EDID data sets are used, if one of
-			edid/1024x768.bin, edid/1280x1024.bin,
-			edid/1680x1050.bin, or edid/1920x1080.bin is given
-			and no file with the same name exists. Details and
-			instructions how to build your own EDID data are
-			available in Documentation/admin-guide/edid.rst. An EDID
-			data set will only be used for a particular connector,
-			if its name and a colon are prepended to the EDID
-			name. Each connector may use a unique EDID data
-			set by separating the files with a comma.  An EDID
+			An EDID data set will only be used for a particular
+			connector, if its name and a colon are prepended to
+			the EDID name. Each connector may use a unique EDID
+			data set by separating the files with a comma. An EDID
 			data set with no connector name will be used for
 			any connectors not explicitly specified.
 
 	dscc4.setup=	[NET]
 
-	dt_cpu_ftrs=	[PPC]
+	dt_cpu_ftrs=	[PPC,EARLY]
 			Format: {"off" | "known"}
 			Control how the dt_cpu_ftrs device-tree binding is
 			used for CPU feature discovery and setup (if it
@@ -1197,12 +1202,12 @@
 			Documentation/admin-guide/dynamic-debug-howto.rst
 			for details.
 
-	early_ioremap_debug [KNL]
+	early_ioremap_debug [KNL,EARLY]
 			Enable debug messages in early_ioremap support. This
 			is useful for tracking down temporary early mappings
 			which are not unmapped.
 
-	earlycon=	[KNL] Output early console device and options.
+	earlycon=	[KNL,EARLY] Output early console device and options.
 
 			When used with no options, the early console is
 			determined by stdout-path property in device tree's
@@ -1338,7 +1343,7 @@
 			address must be provided, and the serial port must
 			already be setup and configured.
 
-	earlyprintk=	[X86,SH,ARM,M68k,S390]
+	earlyprintk=	[X86,SH,ARM,M68k,S390,UM,EARLY]
 			earlyprintk=vga
 			earlyprintk=sclp
 			earlyprintk=xen
@@ -1396,7 +1401,7 @@
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
-	efi=		[EFI]
+	efi=		[EFI,EARLY]
 			Format: { "debug", "disable_early_pci_dma",
 				  "nochunk", "noruntime", "nosoftreserve",
 				  "novamap", "no_disable_early_pci_dma" }
@@ -1417,13 +1422,13 @@
 			no_disable_early_pci_dma: Leave the busmaster bit set
 			on all PCI bridges while in the EFI boot stub
 
-	efi_no_storage_paranoia [EFI; X86]
+	efi_no_storage_paranoia [EFI,X86,EARLY]
 			Using this parameter you can use more than 50% of
 			your efi variable storage. Use this parameter only if
 			you are really sure that your UEFI does sane gc and
 			fulfills the spec otherwise your board may brick.
 
-	efi_fake_mem=	nn[KMG]@ss[KMG]:aa[,nn[KMG]@ss[KMG]:aa,..] [EFI; X86]
+	efi_fake_mem=	nn[KMG]@ss[KMG]:aa[,nn[KMG]@ss[KMG]:aa,..] [EFI,X86,EARLY]
 			Add arbitrary attribute to specific memory range by
 			updating original EFI memory map.
 			Region of memory which aa attribute is added to is
@@ -1454,7 +1459,7 @@
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 
-	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
+	ekgdboc=	[X86,KGDB,EARLY] Allow early kernel console debugging
 			Format: ekgdboc=kbd
 
 			This is designed to be used in conjunction with
@@ -1469,13 +1474,13 @@
 			See comment before function elanfreq_setup() in
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
-	elfcorehdr=[size[KMG]@]offset[KMG] [PPC,SH,X86,S390]
+	elfcorehdr=[size[KMG]@]offset[KMG] [PPC,SH,X86,S390,EARLY]
 			Specifies physical address of start of kernel core
 			image elf header and optionally the size. Generally
 			kexec loader will pass this option to capture kernel.
 			See Documentation/admin-guide/kdump/kdump.rst for details.
 
-	enable_mtrr_cleanup [X86]
+	enable_mtrr_cleanup [X86,EARLY]
 			The kernel tries to adjust MTRR layout from continuous
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter enables that.
@@ -1508,7 +1513,7 @@
 			Permit 'security.evm' to be updated regardless of
 			current integrity status.
 
-	early_page_ext [KNL] Enforces page_ext initialization to earlier
+	early_page_ext [KNL,EARLY] Enforces page_ext initialization to earlier
 			stages so cover more early boot allocations.
 			Please note that as side effect some optimizations
 			might be disabled to achieve that (e.g. parallelized
@@ -1539,6 +1544,12 @@
 			Warning: use of this parameter will taint the kernel
 			and may cause unknown problems.
 
+	fred=		[X86-64]
+			Enable/disable Flexible Return and Event Delivery.
+			Format: { on | off }
+			on: enable FRED when it's present.
+			off: disable FRED, the default setting.
+
 	ftrace=[tracer]
 			[FTRACE] will set and start the specified tracer
 			as early as possible in order to facilitate early
@@ -1561,12 +1572,28 @@
 			The above will cause the "foo" tracing instance to trigger
 			a snapshot at the end of boot up.
 
-	ftrace_dump_on_oops[=orig_cpu]
+	ftrace_dump_on_oops[=2(orig_cpu) | =<instance>][,<instance> |
+			  ,<instance>=2(orig_cpu)]
 			[FTRACE] will dump the trace buffers on oops.
-			If no parameter is passed, ftrace will dump
-			buffers of all CPUs, but if you pass orig_cpu, it will
-			dump only the buffer of the CPU that triggered the
-			oops.
+			If no parameter is passed, ftrace will dump global
+			buffers of all CPUs, if you pass 2 or orig_cpu, it
+			will dump only the buffer of the CPU that triggered
+			the oops, or the specific instance will be dumped if
+			its name is passed. Multiple instance dump is also
+			supported, and instances are separated by commas. Each
+			instance supports only dump on CPU that triggered the
+			oops by passing 2 or orig_cpu to it.
+
+			ftrace_dump_on_oops=foo=orig_cpu
+
+			The above will dump only the buffer of "foo" instance
+			on CPU that triggered the oops.
+
+			ftrace_dump_on_oops,foo,bar=orig_cpu
+
+			The above will dump global buffer on all CPUs, the
+			buffer of "foo" instance on all CPUs and the buffer
+			of "bar" instance on CPU that triggered the oops.
 
 	ftrace_filter=[function-list]
 			[FTRACE] Limit the functions traced by the function
@@ -1600,7 +1627,7 @@
 			can be changed at run time by the max_graph_depth file
 			in the tracefs tracing directory. default: 0 (no limit)
 
-	fw_devlink=	[KNL] Create device links between consumer and supplier
+	fw_devlink=	[KNL,EARLY] Create device links between consumer and supplier
 			devices by scanning the firmware to infer the
 			consumer/supplier relationships. This feature is
 			especially useful when drivers are loaded as modules as
@@ -1619,12 +1646,12 @@
 			rpm --	Like "on", but also use to order runtime PM.
 
 	fw_devlink.strict=<bool>
-			[KNL] Treat all inferred dependencies as mandatory
+			[KNL,EARLY] Treat all inferred dependencies as mandatory
 			dependencies. This only applies for fw_devlink=on|rpm.
 			Format: <bool>
 
 	fw_devlink.sync_state =
-			[KNL] When all devices that could probe have finished
+			[KNL,EARLY] When all devices that could probe have finished
 			probing, this parameter controls what to do with
 			devices that haven't yet received their sync_state()
 			calls.
@@ -1645,12 +1672,12 @@
 
 	gamma=		[HW,DRM]
 
-	gart_fix_e820=	[X86-64] disable the fix e820 for K8 GART
+	gart_fix_e820=	[X86-64,EARLY] disable the fix e820 for K8 GART
 			Format: off | on
 			default: on
 
 	gather_data_sampling=
-			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			[X86,INTEL,EARLY] Control the Gather Data Sampling (GDS)
 			mitigation.
 
 			Gather Data Sampling is a hardware vulnerability which
@@ -1748,7 +1775,18 @@
 				(that will set all pages holding image data
 				during restoration read-only).
 
-	highmem=nn[KMG]	[KNL,BOOT] forces the highmem zone to have an exact
+	hibernate.compressor= 	[HIBERNATION] Compression algorithm to be
+				used with hibernation.
+				Format: { lzo | lz4 }
+				Default: lzo
+
+				lzo: Select LZO compression algorithm to
+				compress/decompress hibernation image.
+
+				lz4: Select LZ4 compression algorithm to
+				compress/decompress hibernation image.
+
+	highmem=nn[KMG]	[KNL,BOOT,EARLY] forces the highmem zone to have an exact
 			size of <nn>. This works even on boxes that have no
 			highmem otherwise. This also works to reduce highmem
 			size on bigger boxes.
@@ -1759,7 +1797,7 @@
 
 	hlt		[BUGS=ARM,SH]
 
-	hostname=	[KNL] Set the hostname (aka UTS nodename).
+	hostname=	[KNL,EARLY] Set the hostname (aka UTS nodename).
 			Format: <string>
 			This allows setting the system's hostname during early
 			startup. This sets the name returned by gethostname.
@@ -1804,7 +1842,7 @@
 			Documentation/admin-guide/mm/hugetlbpage.rst.
 			Format: size[KMG]
 
-	hugetlb_cma=	[HW,CMA] The size of a CMA area used for allocation
+	hugetlb_cma=	[HW,CMA,EARLY] The size of a CMA area used for allocation
 			of gigantic hugepages. Or using node format, the size
 			of a CMA area per node can be specified.
 			Format: nn[KMGTPE] or (node format)
@@ -1850,9 +1888,10 @@
 				If specified, z/VM IUCV HVC accepts connections
 				from listed z/VM user IDs only.
 
-	hv_nopvspin	[X86,HYPER_V] Disables the paravirt spinlock optimizations
-				      which allow the hypervisor to 'idle' the
-				      guest on lock contention.
+	hv_nopvspin	[X86,HYPER_V,EARLY]
+			Disables the paravirt spinlock optimizations
+			which allow the hypervisor to 'idle' the guest
+			on lock contention.
 
 	i2c_bus=	[HW]	Override the default board specific I2C bus speed
 				or register an additional I2C bus that is not
@@ -1917,7 +1956,7 @@
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
 
-	idle=		[X86]
+	idle=		[X86,EARLY]
 			Format: idle=poll, idle=halt, idle=nomwait
 			Poll forces a polling idle loop that can slightly
 			improve the performance of waking up a idle CPU, but
@@ -1973,7 +2012,7 @@
 			mode generally follows that for the NaN encoding,
 			except where unsupported by hardware.
 
-	ignore_loglevel	[KNL]
+	ignore_loglevel	[KNL,EARLY]
 			Ignore loglevel setting - this will print /all/
 			kernel messages to the console. Useful for debugging.
 			We also add it as printk module parameter, so users
@@ -2091,21 +2130,21 @@
 			unpacking being completed before device_ and
 			late_ initcalls.
 
-	initrd=		[BOOT] Specify the location of the initial ramdisk
+	initrd=		[BOOT,EARLY] Specify the location of the initial ramdisk
 
-	initrdmem=	[KNL] Specify a physical address and size from which to
+	initrdmem=	[KNL,EARLY] Specify a physical address and size from which to
 			load the initrd. If an initrd is compiled in or
 			specified in the bootparams, it takes priority over this
 			setting.
 			Format: ss[KMG],nn[KMG]
 			Default is 0, 0
 
-	init_on_alloc=	[MM] Fill newly allocated pages and heap objects with
+	init_on_alloc=	[MM,EARLY] Fill newly allocated pages and heap objects with
 			zeroes.
 			Format: 0 | 1
 			Default set by CONFIG_INIT_ON_ALLOC_DEFAULT_ON.
 
-	init_on_free=	[MM] Fill freed pages and heap objects with zeroes.
+	init_on_free=	[MM,EARLY] Fill freed pages and heap objects with zeroes.
 			Format: 0 | 1
 			Default set by CONFIG_INIT_ON_FREE_DEFAULT_ON.
 
@@ -2161,7 +2200,7 @@
 			0	disables intel_idle and fall back on acpi_idle.
 			1 to 9	specify maximum depth of C-state.
 
-	intel_pstate=	[X86]
+	intel_pstate=	[X86,EARLY]
 			disable
 			  Do not enable intel_pstate as the default
 			  scaling driver for the supported processors
@@ -2205,7 +2244,7 @@
 			  Allow per-logical-CPU P-State performance control limits using
 			  cpufreq sysfs interface
 
-	intremap=	[X86-64, Intel-IOMMU]
+	intremap=	[X86-64,Intel-IOMMU,EARLY]
 			on	enable Interrupt Remapping (default)
 			off	disable Interrupt Remapping
 			nosid	disable Source ID checking
@@ -2217,7 +2256,7 @@
 		strict	regions from userspace.
 		relaxed
 
-	iommu=		[X86]
+	iommu=		[X86,EARLY]
 		off
 		force
 		noforce
@@ -2232,7 +2271,7 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
-	iommu.forcedac=	[ARM64, X86] Control IOVA allocation for PCI devices.
+	iommu.forcedac=	[ARM64,X86,EARLY] Control IOVA allocation for PCI devices.
 			Format: { "0" | "1" }
 			0 - Try to allocate a 32-bit DMA address first, before
 			  falling back to the full range if needed.
@@ -2240,7 +2279,7 @@
 			  forcing Dual Address Cycle for PCI cards supporting
 			  greater than 32-bit addressing.
 
-	iommu.strict=	[ARM64, X86, S390] Configure TLB invalidation behaviour
+	iommu.strict=	[ARM64,X86,S390,EARLY] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.
 			  Request that DMA unmap operations use deferred
@@ -2256,7 +2295,7 @@
 			legacy driver-specific options takes precedence.
 
 	iommu.passthrough=
-			[ARM64, X86] Configure DMA to bypass the IOMMU by default.
+			[ARM64,X86,EARLY] Configure DMA to bypass the IOMMU by default.
 			Format: { "0" | "1" }
 			0 - Use IOMMU translation for DMA.
 			1 - Bypass the IOMMU for DMA.
@@ -2266,7 +2305,7 @@
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86] I/O delay method
+	io_delay=	[X86,EARLY] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -2279,28 +2318,28 @@
 	ip=		[IP_PNP]
 			See Documentation/admin-guide/nfs/nfsroot.rst.
 
-	ipcmni_extend	[KNL] Extend the maximum number of unique System V
+	ipcmni_extend	[KNL,EARLY] Extend the maximum number of unique System V
 			IPC identifiers from 32,768 to 16,777,216.
 
 	irqaffinity=	[SMP] Set the default irq affinity mask
 			The argument is a cpu list, as described above.
 
 	irqchip.gicv2_force_probe=
-			[ARM, ARM64]
+			[ARM,ARM64,EARLY]
 			Format: <bool>
 			Force the kernel to look for the second 4kB page
 			of a GICv2 controller even if the memory range
 			exposed by the device tree is too small.
 
 	irqchip.gicv3_nolpi=
-			[ARM, ARM64]
+			[ARM,ARM64,EARLY]
 			Force the kernel to ignore the availability of
 			LPIs (and by consequence ITSs). Intended for system
 			that use the kernel as a bootloader, and thus want
 			to let secondary kernels in charge of setting up
 			LPIs.
 
-	irqchip.gicv3_pseudo_nmi= [ARM64]
+	irqchip.gicv3_pseudo_nmi= [ARM64,EARLY]
 			Enables support for pseudo-NMIs in the kernel. This
 			requires the kernel to be built with
 			CONFIG_ARM64_PSEUDO_NMI.
@@ -2445,7 +2484,7 @@
 			parameter KASAN will print report only for the first
 			invalid access.
 
-	keep_bootcon	[KNL]
+	keep_bootcon	[KNL,EARLY]
 			Do not unregister boot console at start. This is only
 			useful for debugging when something happens in the window
 			between unregistering the boot console and initializing
@@ -2453,7 +2492,7 @@
 
 	keepinitrd	[HW,ARM] See retain_initrd.
 
-	kernelcore=	[KNL,X86,IA-64,PPC]
+	kernelcore=	[KNL,X86,IA-64,PPC,EARLY]
 			Format: nn[KMGTPE] | nn% | "mirror"
 			This parameter specifies the amount of memory usable by
 			the kernel for non-movable allocations.  The requested
@@ -2478,7 +2517,7 @@
 			for Movable pages.  "nn[KMGTPE]", "nn%", and "mirror"
 			are exclusive, so you cannot specify multiple forms.
 
-	kgdbdbgp=	[KGDB,HW] kgdb over EHCI usb debug port.
+	kgdbdbgp=	[KGDB,HW,EARLY] kgdb over EHCI usb debug port.
 			Format: <Controller#>[,poll interval]
 			The controller # is the number of the ehci usb debug
 			port as it is probed via PCI.  The poll interval is
@@ -2499,7 +2538,7 @@
 			 kms, kbd format: kms,kbd
 			 kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
 
-	kgdboc_earlycon=	[KGDB,HW]
+	kgdboc_earlycon=	[KGDB,HW,EARLY]
 			If the boot console provides the ability to read
 			characters and can work in polling mode, you can use
 			this parameter to tell kgdb to use it as a backend
@@ -2514,14 +2553,14 @@
 			blank and the first boot console that implements
 			read() will be picked.
 
-	kgdbwait	[KGDB] Stop kernel execution and enter the
+	kgdbwait	[KGDB,EARLY] Stop kernel execution and enter the
 			kernel debugger at the earliest opportunity.
 
 	kmac=		[MIPS] Korina ethernet MAC address.
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kmemleak=	[KNL] Boot-time kmemleak enable/disable
+	kmemleak=	[KNL,EARLY] Boot-time kmemleak enable/disable
 			Valid arguments: on, off
 			Default: on
 			Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
@@ -2540,8 +2579,8 @@
 			See also Documentation/trace/kprobetrace.rst "Kernel
 			Boot Parameter" section.
 
-	kpti=		[ARM64] Control page table isolation of user
-			and kernel address spaces.
+	kpti=		[ARM64,EARLY] Control page table isolation of
+			user and kernel address spaces.
 			Default: enabled on cores which need mitigation.
 			0: force disabled
 			1: force enabled
@@ -2618,7 +2657,8 @@
 			for NPT.
 
 	kvm-arm.mode=
-			[KVM,ARM] Select one of KVM/arm64's modes of operation.
+			[KVM,ARM,EARLY] Select one of KVM/arm64's modes of
+			operation.
 
 			none: Forcefully disable KVM.
 
@@ -2638,22 +2678,22 @@
 			used with extreme caution.
 
 	kvm-arm.vgic_v3_group0_trap=
-			[KVM,ARM] Trap guest accesses to GICv3 group-0
+			[KVM,ARM,EARLY] Trap guest accesses to GICv3 group-0
 			system registers
 
 	kvm-arm.vgic_v3_group1_trap=
-			[KVM,ARM] Trap guest accesses to GICv3 group-1
+			[KVM,ARM,EARLY] Trap guest accesses to GICv3 group-1
 			system registers
 
 	kvm-arm.vgic_v3_common_trap=
-			[KVM,ARM] Trap guest accesses to GICv3 common
+			[KVM,ARM,EARLY] Trap guest accesses to GICv3 common
 			system registers
 
 	kvm-arm.vgic_v4_enable=
-			[KVM,ARM] Allow use of GICv4 for direct injection of
-			LPIs.
+			[KVM,ARM,EARLY] Allow use of GICv4 for direct
+			injection of LPIs.
 
-	kvm_cma_resv_ratio=n [PPC]
+	kvm_cma_resv_ratio=n [PPC,EARLY]
 			Reserves given percentage from system memory area for
 			contiguous memory allocation for KVM hash pagetable
 			allocation.
@@ -2706,7 +2746,7 @@
 			(enabled). Disable by KVM if hardware lacks support
 			for it.
 
-	l1d_flush=	[X86,INTEL]
+	l1d_flush=	[X86,INTEL,EARLY]
 			Control mitigation for L1D based snooping vulnerability.
 
 			Certain CPUs are vulnerable to an exploit against CPU
@@ -2723,7 +2763,7 @@
 
 			on         - enable the interface for the mitigation
 
-	l1tf=           [X86] Control mitigation of the L1TF vulnerability on
+	l1tf=           [X86,EARLY] Control mitigation of the L1TF vulnerability on
 			      affected CPUs
 
 			The kernel PTE inversion protection is unconditionally
@@ -2792,7 +2832,7 @@
 
 	l3cr=		[PPC]
 
-	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
+	lapic		[X86-32,APIC,EARLY] Enable the local APIC even if BIOS
 			disabled it.
 
 	lapic=		[X86,APIC] Do not use TSC deadline
@@ -2800,7 +2840,7 @@
 			back to the programmable timer unit in the LAPIC.
 			Format: notscdeadline
 
-	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86,APIC,EARLY] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -2924,7 +2964,7 @@
 	lockd.nlm_udpport=M	[NFS] Assign UDP port.
 			Format: <integer>
 
-	lockdown=	[SECURITY]
+	lockdown=	[SECURITY,EARLY]
 			{ integrity | confidentiality }
 			Enable the kernel lockdown feature. If set to
 			integrity, kernel features that allow userland to
@@ -3031,7 +3071,8 @@
 	logibm.irq=	[HW,MOUSE] Logitech Bus Mouse Driver
 			Format: <irq>
 
-	loglevel=	All Kernel Messages with a loglevel smaller than the
+	loglevel=	[KNL,EARLY]
+			All Kernel Messages with a loglevel smaller than the
 			console loglevel will be printed to the console. It can
 			also be changed with klogd or other programs. The
 			loglevels are defined as follows:
@@ -3045,13 +3086,15 @@
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
-			in bytes.  n must be a power of two and greater
-			than the minimal size. The minimal size is defined
-			by LOG_BUF_SHIFT kernel config parameter. There is
-			also CONFIG_LOG_CPU_MAX_BUF_SHIFT config parameter
-			that allows to increase the default size depending on
-			the number of CPUs. See init/Kconfig for more details.
+	log_buf_len=n[KMG] [KNL,EARLY]
+			Sets the size of the printk ring buffer, in bytes.
+			n must be a power of two and greater than the
+			minimal size. The minimal size is defined by
+			LOG_BUF_SHIFT kernel config parameter. There
+			is also CONFIG_LOG_CPU_MAX_BUF_SHIFT config
+			parameter that allows to increase the default size
+			depending on the number of CPUs. See init/Kconfig
+			for more details.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for
@@ -3109,7 +3152,7 @@
 	max_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory greater
 			than or equal to this physical address is ignored.
 
-	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel
+	maxcpus=	[SMP,EARLY] Maximum number of processors that an SMP kernel
 			will bring up during bootup.  maxcpus=n : n >= 0 limits
 			the kernel to bring up 'n' processors. Surely after
 			bootup you can bring up the other plugged cpu by executing
@@ -3136,7 +3179,7 @@
 			Format: <first>,<last>
 			Specifies range of consoles to be captured by the MDA.
 
-	mds=		[X86,INTEL]
+	mds=		[X86,INTEL,EARLY]
 			Control mitigation for the Micro-architectural Data
 			Sampling (MDS) vulnerability.
 
@@ -3168,11 +3211,12 @@
 
 			For details see: Documentation/admin-guide/hw-vuln/mds.rst
 
-	mem=nn[KMG]	[HEXAGON] Set the memory size.
+	mem=nn[KMG]	[HEXAGON,EARLY] Set the memory size.
 			Must be specified, otherwise memory size will be 0.
 
-	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
-			Amount of memory to be used in cases as follows:
+	mem=nn[KMG]	[KNL,BOOT,EARLY] Force usage of a specific amount
+			of memory Amount of memory to be used in cases
+			as follows:
 
 			1 for test;
 			2 when the kernel is not able to see the whole system memory;
@@ -3196,8 +3240,8 @@
 			if system memory of hypervisor is not sufficient.
 
 	mem=nn[KMG]@ss[KMG]
-			[ARM,MIPS] - override the memory layout reported by
-			firmware.
+			[ARM,MIPS,EARLY] - override the memory layout
+			reported by firmware.
 			Define a memory region of size nn[KMG] starting at
 			ss[KMG].
 			Multiple different regions can be specified with
@@ -3206,7 +3250,7 @@
 	mem=nopentium	[BUGS=X86-32] Disable usage of 4MB pages for kernel
 			memory.
 
-	memblock=debug	[KNL] Enable memblock debug messages.
+	memblock=debug	[KNL,EARLY] Enable memblock debug messages.
 
 	memchunk=nn[KMG]
 			[KNL,SH] Allow user to override the default size for
@@ -3220,14 +3264,14 @@
 			option.
 			See Documentation/admin-guide/mm/memory-hotplug.rst.
 
-	memmap=exactmap	[KNL,X86] Enable setting of an exact
+	memmap=exactmap	[KNL,X86,EARLY] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
 			option description.
 
 	memmap=nn[KMG]@ss[KMG]
-			[KNL, X86, MIPS, XTENSA] Force usage of a specific region of memory.
+			[KNL, X86,MIPS,XTENSA,EARLY] Force usage of a specific region of memory.
 			Region of memory to be used is from ss to ss+nn.
 			If @ss[KMG] is omitted, it is equivalent to mem=nn[KMG],
 			which limits max address to nn[KMG].
@@ -3237,11 +3281,11 @@
 				memmap=100M@2G,100M#3G,1G!1024G
 
 	memmap=nn[KMG]#ss[KMG]
-			[KNL,ACPI] Mark specific memory as ACPI data.
+			[KNL,ACPI,EARLY] Mark specific memory as ACPI data.
 			Region of memory to be marked is from ss to ss+nn.
 
 	memmap=nn[KMG]$ss[KMG]
-			[KNL,ACPI] Mark specific memory as reserved.
+			[KNL,ACPI,EARLY] Mark specific memory as reserved.
 			Region of memory to be reserved is from ss to ss+nn.
 			Example: Exclude memory from 0x18690000-0x1869ffff
 			         memmap=64K$0x18690000
@@ -3251,14 +3295,14 @@
 			like Grub2, otherwise '$' and the following number
 			will be eaten.
 
-	memmap=nn[KMG]!ss[KMG]
+	memmap=nn[KMG]!ss[KMG,EARLY]
 			[KNL,X86] Mark specific memory as protected.
 			Region of memory to be used, from ss to ss+nn.
 			The memory region may be marked as e820 type 12 (0xc)
 			and is NVDIMM or ADR memory.
 
 	memmap=<size>%<offset>-<oldtype>+<newtype>
-			[KNL,ACPI] Convert memory within the specified region
+			[KNL,ACPI,EARLY] Convert memory within the specified region
 			from <oldtype> to <newtype>. If "-<oldtype>" is left
 			out, the whole region will be marked as <newtype>,
 			even if previously unavailable. If "+<newtype>" is left
@@ -3266,7 +3310,7 @@
 			specified as e820 types, e.g., 1 = RAM, 2 = reserved,
 			3 = ACPI, 12 = PRAM.
 
-	memory_corruption_check=0/1 [X86]
+	memory_corruption_check=0/1 [X86,EARLY]
 			Some BIOSes seem to corrupt the first 64k of
 			memory when doing things like suspend/resume.
 			Setting this option will scan the memory
@@ -3278,13 +3322,13 @@
 			affects the same memory, you can use memmap=
 			to prevent the kernel from using that memory.
 
-	memory_corruption_check_size=size [X86]
+	memory_corruption_check_size=size [X86,EARLY]
 			By default it checks for corruption in the low
 			64k, making this memory unavailable for normal
 			use.  Use this parameter to scan for
 			corruption in more or less memory.
 
-	memory_corruption_check_period=seconds [X86]
+	memory_corruption_check_period=seconds [X86,EARLY]
 			By default it checks for corruption every 60
 			seconds.  Use this parameter to check at some
 			other rate.  0 disables periodic checking.
@@ -3308,7 +3352,7 @@
 			Note that even when enabled, there are a few cases where
 			the feature is not effective.
 
-	memtest=	[KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
+	memtest=	[KNL,X86,ARM,M68K,PPC,RISCV,EARLY] Enable memtest
 			Format: <integer>
 			default : 0 <disable>
 			Specifies the number of memtest passes to be
@@ -3320,9 +3364,7 @@
 
 	mem_encrypt=	[X86-64] AMD Secure Memory Encryption (SME) control
 			Valid arguments: on, off
-			Default (depends on kernel configuration option):
-			  on  (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y)
-			  off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n)
+			Default: off
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
@@ -3376,11 +3418,14 @@
 			https://repo.or.cz/w/linux-2.6/mini2440.git
 
 	mitigations=
-			[X86,PPC,S390,ARM64] Control optional mitigations for
+			[X86,PPC,S390,ARM64,EARLY] Control optional mitigations for
 			CPU vulnerabilities.  This is a set of curated,
 			arch-independent options, each of which is an
 			aggregation of existing arch-specific options.
 
+			Note, "mitigations" is supported if and only if the
+			kernel was built with CPU_MITIGATIONS=y.
+
 			off
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
@@ -3398,8 +3443,11 @@
 					       nospectre_bhb [ARM64]
 					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
+					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
+					       spec_rstack_overflow=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
@@ -3429,7 +3477,7 @@
 					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
-			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
+			[KNL,EARLY] When CONFIG_DEBUG_MEMORY_INIT is set, this
 			parameter allows control of the logging verbosity for
 			the additional memory initialisation checks. A value
 			of 0 disables mminit logging and a level of 4 will
@@ -3437,7 +3485,7 @@
 			so loglevel=8 may also need to be specified.
 
 	mmio_stale_data=
-			[X86,INTEL] Control mitigation for the Processor
+			[X86,INTEL,EARLY] Control mitigation for the Processor
 			MMIO Stale Data vulnerabilities.
 
 			Processor MMIO Stale Data is a class of
@@ -3512,7 +3560,7 @@
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=	[KNL,X86,IA-64,PPC]
+	movablecore=	[KNL,X86,IA-64,PPC,EARLY]
 			Format: nn[KMGTPE] | nn%
 			This parameter is the complement to kernelcore=, it
 			specifies the amount of memory used for migratable
@@ -3523,7 +3571,7 @@
 			that the amount of memory usable for all allocations
 			is not too small.
 
-	movable_node	[KNL] Boot-time switch to make hotplugable memory
+	movable_node	[KNL,EARLY] Boot-time switch to make hotplugable memory
 			NUMA nodes to be movable. This means that the memory
 			of such nodes will be usable only for movable
 			allocations which rules out almost all kernel
@@ -3547,21 +3595,21 @@
 			[HW] Make the MicroTouch USB driver use raw coordinates
 			('y', default) or cooked coordinates ('n')
 
-	mtrr=debug	[X86]
+	mtrr=debug	[X86,EARLY]
 			Enable printing debug information related to MTRR
 			registers at boot time.
 
-	mtrr_chunk_size=nn[KMG] [X86]
+	mtrr_chunk_size=nn[KMG,X86,EARLY]
 			used for mtrr cleanup. It is largest continuous chunk
 			that could hold holes aka. UC entries.
 
-	mtrr_gran_size=nn[KMG] [X86]
+	mtrr_gran_size=nn[KMG,X86,EARLY]
 			Used for mtrr cleanup. It is granularity of mtrr block.
 			Default is 1.
 			Large value could prevent small alignment from
 			using up MTRRs.
 
-	mtrr_spare_reg_nr=n [X86]
+	mtrr_spare_reg_nr=n [X86,EARLY]
 			Format: <integer>
 			Range: 0,7 : spare reg number
 			Default : 1
@@ -3747,27 +3795,23 @@
 			emulation library even if a 387 maths coprocessor
 			is present.
 
-	no4lvl		[RISCV] Disable 4-level and 5-level paging modes. Forces
-			kernel to use 3-level paging instead.
+	no4lvl		[RISCV,EARLY] Disable 4-level and 5-level paging modes.
+			Forces kernel to use 3-level paging instead.
 
-	no5lvl		[X86-64,RISCV] Disable 5-level paging mode. Forces
+	no5lvl		[X86-64,RISCV,EARLY] Disable 5-level paging mode. Forces
 			kernel to use 4-level paging instead.
 
-	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien
-			caches in the slab allocator.  Saves per-node memory,
-			but will impact performance.
-
 	noalign		[KNL,ARM]
 
-	noaltinstr	[S390] Disables alternative instructions patching
-			(CPU alternatives feature).
+	noaltinstr	[S390,EARLY] Disables alternative instructions
+			patching (CPU alternatives feature).
 
-	noapic		[SMP,APIC] Tells the kernel to not make use of any
+	noapic		[SMP,APIC,EARLY] Tells the kernel to not make use of any
 			IOAPICs that may be present in the system.
 
 	noautogroup	Disable scheduler automatic task group creation.
 
-	nocache		[ARM]
+	nocache		[ARM,EARLY]
 
 	no_console_suspend
 			[HW] Never suspend the console
@@ -3785,13 +3829,13 @@
 			turn on/off it dynamically.
 
 	no_debug_objects
-			[KNL] Disable object debugging
+			[KNL,EARLY] Disable object debugging
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		Disable EFI runtime services support.
+	noefi		[EFI,EARLY] Disable EFI runtime services support.
 
-	no_entry_flush  [PPC] Don't flush the L1-D cache when entering the kernel.
+	no_entry_flush  [PPC,EARLY] Don't flush the L1-D cache when entering the kernel.
 
 	noexec		[IA-64]
 
@@ -3822,6 +3866,7 @@
 			real-time systems.
 
 	no_hash_pointers
+			[KNL,EARLY]
 			Force pointers printed to the console or buffers to be
 			unhashed.  By default, when a pointer is printed via %p
 			format string, that pointer is "hashed", i.e. obscured
@@ -3846,9 +3891,9 @@
 			the impact of the sleep instructions. This is also
 			useful when using JTAG debugger.
 
-	nohugeiomap	[KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
+	nohugeiomap	[KNL,X86,PPC,ARM64,EARLY] Disable kernel huge I/O mappings.
 
-	nohugevmalloc	[KNL,X86,PPC,ARM64] Disable kernel huge vmalloc mappings.
+	nohugevmalloc	[KNL,X86,PPC,ARM64,EARLY] Disable kernel huge vmalloc mappings.
 
 	nohz=		[KNL] Boottime enable/disable dynamic ticks
 			Valid arguments: on, off
@@ -3870,13 +3915,13 @@
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
 
-	nointremap	[X86-64, Intel-IOMMU] Do not enable interrupt
+	nointremap	[X86-64,Intel-IOMMU,EARLY] Do not enable interrupt
 			remapping.
 			[Deprecated - use intremap=off]
 
 	nointroute	[IA-64]
 
-	noinvpcid	[X86] Disable the INVPCID cpu feature.
+	noinvpcid	[X86,EARLY] Disable the INVPCID cpu feature.
 
 	noiotrap	[SH] Disables trapped I/O port accesses.
 
@@ -3887,19 +3932,19 @@
 
 	nojitter	[IA-64] Disables jitter checking for ITC timers.
 
-	nokaslr		[KNL]
+	nokaslr		[KNL,EARLY]
 			When CONFIG_RANDOMIZE_BASE is set, this disables
 			kernel and module base offset ASLR (Address Space
 			Layout Randomization).
 
-	no-kvmapf	[X86,KVM] Disable paravirtualized asynchronous page
+	no-kvmapf	[X86,KVM,EARLY] Disable paravirtualized asynchronous page
 			fault handling.
 
-	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
+	no-kvmclock	[X86,KVM,EARLY] Disable paravirtualized KVM clock driver
 
-	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
+	nolapic		[X86-32,APIC,EARLY] Do not enable or use the local APIC.
 
-	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
+	nolapic_timer	[X86-32,APIC,EARLY] Do not use the local APIC timer.
 
 	nomca		[IA-64] Disable machine check abort handling
 
@@ -3924,23 +3969,23 @@
 			shutdown the other cpus.  Instead use the REBOOT_VECTOR
 			irq.
 
-	nopat		[X86] Disable PAT (page attribute table extension of
+	nopat		[X86,EARLY] Disable PAT (page attribute table extension of
 			pagetables) support.
 
-	nopcid		[X86-64] Disable the PCID cpu feature.
+	nopcid		[X86-64,EARLY] Disable the PCID cpu feature.
 
 	nopku		[X86] Disable Memory Protection Keys CPU feature found
 			in some Intel CPUs.
 
-	nopti		[X86-64]
+	nopti		[X86-64,EARLY]
 			Equivalent to pti=off
 
-	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE]
+	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE,EARLY]
 			Disables the PV optimizations forcing the guest to run
 			as generic guest with no PV drivers. Currently support
 			XEN HVM, KVM, HYPER_V and VMWARE guest.
 
-	nopvspin	[X86,XEN,KVM]
+	nopvspin	[X86,XEN,KVM,EARLY]
 			Disables the qspinlock slow path using PV optimizations
 			which allow the hypervisor to 'idle' the guest on lock
 			contention.
@@ -3960,20 +4005,20 @@
 			This is required for the Braillex ib80-piezo Braille
 			reader made by F.H. Papenmeier (Germany).
 
-	nosgx		[X86-64,SGX] Disables Intel SGX kernel support.
+	nosgx		[X86-64,SGX,EARLY] Disables Intel SGX kernel support.
 
-	nosmap		[PPC]
+	nosmap		[PPC,EARLY]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
 
-	nosmep		[PPC64s]
+	nosmep		[PPC64s,EARLY]
 			Disable SMEP (Supervisor Mode Execution Prevention)
 			even if it is supported by processor.
 
-	nosmp		[SMP] Tells an SMP kernel to act as a UP kernel,
+	nosmp		[SMP,EARLY] Tells an SMP kernel to act as a UP kernel,
 			and disable the IO APIC.  legacy for "maxcpus=0".
 
-	nosmt		[KNL,MIPS,PPC,S390] Disable symmetric multithreading (SMT).
+	nosmt		[KNL,MIPS,PPC,S390,EARLY] Disable symmetric multithreading (SMT).
 			Equivalent to smt=1.
 
 			[KNL,X86,PPC] Disable symmetric multithreading (SMT).
@@ -3983,22 +4028,23 @@
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
 	nospec_store_bypass_disable
-			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+			[HW,EARLY] Disable all mitigations for the Speculative
+			Store Bypass vulnerability
 
-	nospectre_bhb	[ARM64] Disable all mitigations for Spectre-BHB (branch
+	nospectre_bhb	[ARM64,EARLY] Disable all mitigations for Spectre-BHB (branch
 			history injection) vulnerability. System may allow data leaks
 			with this option.
 
-	nospectre_v1	[X86,PPC] Disable mitigations for Spectre Variant 1
+	nospectre_v1	[X86,PPC,EARLY] Disable mitigations for Spectre Variant 1
 			(bounds check bypass). With this option data leaks are
 			possible in the system.
 
-	nospectre_v2	[X86,PPC_E500,ARM64] Disable all mitigations for
-			the Spectre variant 2 (indirect branch prediction)
-			vulnerability. System may allow data leaks with this
-			option.
+	nospectre_v2	[X86,PPC_E500,ARM64,EARLY] Disable all mitigations
+			for the Spectre variant 2 (indirect branch
+			prediction) vulnerability. System may allow data
+			leaks with this option.
 
-	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES,RISCV] Disable
+	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES,RISCV,EARLY] Disable
 			paravirtualized steal time accounting. steal time is
 			computed, but won't influence scheduler behaviour
 
@@ -4008,7 +4054,7 @@
 			broken timer IRQ sources.
 
 	no_uaccess_flush
-	                [PPC] Don't flush the L1-D cache after accessing user data.
+	                [PPC,EARLY] Don't flush the L1-D cache after accessing user data.
 
 	novmcoredd	[KNL,KDUMP]
 			Disable device dump. Device dump allows drivers to
@@ -4022,15 +4068,15 @@
 			is set.
 
 	no-vmw-sched-clock
-			[X86,PV_OPS] Disable paravirtualized VMware scheduler
-			clock and use the default one.
+			[X86,PV_OPS,EARLY] Disable paravirtualized VMware
+			scheduler clock and use the default one.
 
 	nowatchdog	[KNL] Disable both lockup detectors, i.e.
 			soft-lockup and NMI watchdog (hard-lockup).
 
-	nowb		[ARM]
+	nowb		[ARM,EARLY]
 
-	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+	nox2apic	[X86-64,APIC,EARLY] Do not enable x2APIC mode.
 
 			NOTE: this parameter will be ignored on systems with the
 			LEGACY_XAPIC_DISABLED bit set in the
@@ -4068,7 +4114,7 @@
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.
 
-	nr_cpus=	[SMP] Maximum number of processors that	an SMP kernel
+	nr_cpus=	[SMP,EARLY] Maximum number of processors that an SMP kernel
 			could support.  nr_cpus=n : n >= 1 limits the kernel to
 			support 'n' processors. It could be larger than the
 			number of already plugged CPU during bootup, later in
@@ -4079,8 +4125,9 @@
 
 	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
 
-	numa=off 	[KNL, ARM64, PPC, RISCV, SPARC, X86] Disable NUMA, Only
-			set up a single NUMA node spanning all memory.
+	numa=off 	[KNL, ARM64, PPC, RISCV, SPARC, X86, EARLY]
+			Disable NUMA, Only set up a single NUMA node
+			spanning all memory.
 
 	numa_balancing=	[KNL,ARM64,PPC,RISCV,S390,X86] Enable or disable automatic
 			NUMA balancing.
@@ -4091,7 +4138,7 @@
 			This can be set from sysctl after boot.
 			See Documentation/admin-guide/sysctl/vm.rst for details.
 
-	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
+	ohci1394_dma=early	[HW,EARLY] enable debugging via the ohci1394 driver.
 			See Documentation/core-api/debugging-via-ohci1394.rst for more
 			info.
 
@@ -4117,7 +4164,8 @@
 				   Once locked, the boundary cannot be changed.
 				   1 indicates lock status, 0 indicates unlock status.
 
-	oops=panic	Always panic on oopses. Default is to just kill the
+	oops=panic	[KNL,EARLY]
+			Always panic on oopses. Default is to just kill the
 			process, but there is a small probability of
 			deadlocking the machine.
 			This will also cause panics on machine check exceptions.
@@ -4133,13 +4181,13 @@
 			can be read from sysfs at:
 			/sys/module/page_alloc/parameters/shuffle.
 
-	page_owner=	[KNL] Boot-time page_owner enabling option.
+	page_owner=	[KNL,EARLY] Boot-time page_owner enabling option.
 			Storage of the information about who allocated
 			each page is disabled in default. With this switch,
 			we can turn it on.
 			on: enable the feature
 
-	page_poison=	[KNL] Boot-time parameter changing the state of
+	page_poison=	[KNL,EARLY] Boot-time parameter changing the state of
 			poisoning on the buddy allocator, available with
 			CONFIG_PAGE_POISONING=y.
 			off: turn off poisoning (default)
@@ -4157,7 +4205,8 @@
 			timeout < 0: reboot immediately
 			Format: <timeout>
 
-	panic_on_taint=	Bitmask for conditionally calling panic() in add_taint()
+	panic_on_taint=	[KNL,EARLY]
+			Bitmask for conditionally calling panic() in add_taint()
 			Format: <hex>[,nousertaint]
 			Hexadecimal bitmask representing the set of TAINT flags
 			that will cause the kernel to panic when add_taint() is
@@ -4182,6 +4231,7 @@
 			bit 4: print ftrace buffer
 			bit 5: print all printk messages in buffer
 			bit 6: print all CPUs backtrace (if available in the arch)
+			bit 7: print only tasks in uninterruptible (blocked) state
 			*Be aware* that this option may print a _lot_ of lines,
 			so there are risks of losing older messages in the log.
 			Use this option carefully, maybe worth to setup a
@@ -4313,7 +4363,7 @@
 
 	pcbit=		[HW,ISDN]
 
-	pci=option[,option...]	[PCI] various PCI subsystem options.
+	pci=option[,option...]	[PCI,EARLY] various PCI subsystem options.
 
 				Some options herein operate on a specific device
 				or a set of devices (<pci_dev>). These are
@@ -4582,7 +4632,8 @@
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
-	percpu_alloc=	Select which percpu first chunk allocator to use.
+	percpu_alloc=	[MM,EARLY]
+			Select which percpu first chunk allocator to use.
 			Currently supported values are "embed" and "page".
 			Archs may support subset or none of the	selections.
 			See comments in mm/percpu.c for details on each
@@ -4644,6 +4695,11 @@
 			may be specified.
 			Format: <port>,<port>....
 
+	possible_cpus=  [SMP,S390,X86]
+			Format: <unsigned int>
+			Set the number of possible CPUs, overriding the
+			regular discovery mechanisms (such as ACPI/FW, etc).
+
 	powersave=off	[PPC] This option disables power saving features.
 			It specifically disables cpuidle and sets the
 			platform machine description specific power_save
@@ -4651,12 +4707,12 @@
 			execution priority.
 
 	ppc_strict_facility_enable
-			[PPC] This option catches any kernel floating point,
+			[PPC,ENABLE] This option catches any kernel floating point,
 			Altivec, VSX and SPE outside of regions specifically
 			allowed (eg kernel_enable_fpu()/kernel_disable_fpu()).
 			There is some performance impact when enabling this.
 
-	ppc_tm=		[PPC]
+	ppc_tm=		[PPC,EARLY]
 			Format: {"off"}
 			Disable Hardware Transactional Memory
 
@@ -4766,7 +4822,7 @@
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.
 
-	quiet		[KNL] Disable most log messages
+	quiet		[KNL,EARLY] Disable most log messages
 
 	r128=		[HW,DRM]
 
@@ -4783,17 +4839,17 @@
 	ramdisk_start=	[RAM] RAM disk image start address
 
 	random.trust_cpu=off
-			[KNL] Disable trusting the use of the CPU's
+			[KNL,EARLY] Disable trusting the use of the CPU's
 			random number generator (if available) to
 			initialize the kernel's RNG.
 
 	random.trust_bootloader=off
-			[KNL] Disable trusting the use of the a seed
+			[KNL,EARLY] Disable trusting the use of the a seed
 			passed by the bootloader (if available) to
 			initialize the kernel's RNG.
 
 	randomize_kstack_offset=
-			[KNL] Enable or disable kernel stack offset
+			[KNL,EARLY] Enable or disable kernel stack offset
 			randomization, which provides roughly 5 bits of
 			entropy, frustrating memory corruption attacks
 			that depend on stack address determinism or
@@ -5034,6 +5090,11 @@
 			this kernel boot parameter, forcibly setting it
 			to zero.
 
+	rcutree.enable_rcu_lazy= [KNL]
+			To save power, batch RCU callbacks and flush after
+			delay, memory pressure or callback list growing too
+			big.
+
 	rcuscale.gp_async= [KNL]
 			Measure performance of asynchronous
 			grace-period primitives such as call_rcu().
@@ -5484,7 +5545,7 @@
 			Run specified binary instead of /init from the ramdisk,
 			used for early userspace startup. See initrd.
 
-	rdrand=		[X86]
+	rdrand=		[X86,EARLY]
 			force - Override the decision by the kernel to hide the
 				advertisement of RDRAND support (this affects
 				certain AMD processors because of buggy BIOS
@@ -5580,7 +5641,7 @@
 			them.  If <base> is less than 0x10000, the region
 			is assumed to be I/O ports; otherwise it is memory.
 
-	reservetop=	[X86-32]
+	reservetop=	[X86-32,EARLY]
 			Format: nn[KMG]
 			Reserves a hole at the top of the kernel virtual
 			address space.
@@ -5665,7 +5726,7 @@
 			[KNL] Disable ring 3 MONITOR/MWAIT feature on supported
 			CPUs.
 
-	riscv_isa_fallback [RISCV]
+	riscv_isa_fallback [RISCV,EARLY]
 			When CONFIG_RISCV_ISA_FALLBACK is not enabled, permit
 			falling back to detecting extension support by parsing
 			"riscv,isa" property on devicetree systems when the
@@ -5674,13 +5735,14 @@
 
 	ro		[KNL] Mount root device read-only on boot
 
-	rodata=		[KNL]
+	rodata=		[KNL,EARLY]
 		on	Mark read-only kernel memory as read-only (default).
 		off	Leave read-only kernel memory writable for debugging.
 		full	Mark read-only kernel memory and aliases as read-only
 		        [arm64]
 
 	rockchip.usb_uart
+			[EARLY]
 			Enable the uart passthrough on the designated usb port
 			on Rockchip SoCs. When active, the signals of the
 			debug-uart get routed to the D+ and D- pins of the usb
@@ -5741,7 +5803,7 @@
 	sa1100ir	[NET]
 			See drivers/net/irda/sa1100_ir.c.
 
-	sched_verbose	[KNL] Enables verbose scheduler debug messages.
+	sched_verbose	[KNL,EARLY] Enables verbose scheduler debug messages.
 
 	schedstats=	[KNL,X86] Enable or disable scheduled statistics.
 			Allowed values are enable and disable. This feature
@@ -5856,7 +5918,7 @@
 			non-zero "wait" parameter.  See weight_single
 			and weight_many.
 
-	skew_tick=	[KNL] Offset the periodic timer tick per cpu to mitigate
+	skew_tick=	[KNL,EARLY] Offset the periodic timer tick per cpu to mitigate
 			xtime_lock contention on larger systems, and/or RCU lock
 			contention on all systems with CONFIG_MAXSMP set.
 			Format: { "0" | "1" }
@@ -5895,65 +5957,58 @@
 	simeth=		[IA-64]
 	simscsi=
 
-	slram=		[HW,MTD]
-
-	slab_merge	[MM]
-			Enable merging of slabs with similar size when the
-			kernel is built without CONFIG_SLAB_MERGE_DEFAULT.
-
-	slab_nomerge	[MM]
-			Disable merging of slabs with similar size. May be
-			necessary if there is some reason to distinguish
-			allocs to different slabs, especially in hardened
-			environments where the risk of heap overflows and
-			layout control by attackers can usually be
-			frustrated by disabling merging. This will reduce
-			most of the exposure of a heap attack to a single
-			cache (risks via metadata attacks are mostly
-			unchanged). Debug options disable merging on their
-			own.
-			For more information see Documentation/mm/slub.rst.
-
-	slab_max_order=	[MM, SLAB]
-			Determines the maximum allowed order for slabs.
-			A high setting may cause OOMs due to memory
-			fragmentation.  Defaults to 1 for systems with
-			more than 32MB of RAM, 0 otherwise.
-
-	slub_debug[=options[,slabs][;[options[,slabs]]...]	[MM, SLUB]
-			Enabling slub_debug allows one to determine the
+	slab_debug[=options[,slabs][;[options[,slabs]]...]	[MM]
+			Enabling slab_debug allows one to determine the
 			culprit if slab objects become corrupted. Enabling
-			slub_debug can create guard zones around objects and
+			slab_debug can create guard zones around objects and
 			may poison objects when not in use. Also tracks the
 			last alloc / free. For more information see
 			Documentation/mm/slub.rst.
+			(slub_debug legacy name also accepted for now)
 
-	slub_max_order= [MM, SLUB]
+	slab_max_order= [MM]
 			Determines the maximum allowed order for slabs.
 			A high setting may cause OOMs due to memory
 			fragmentation. For more information see
 			Documentation/mm/slub.rst.
+			(slub_max_order legacy name also accepted for now)
 
-	slub_min_objects=	[MM, SLUB]
+	slab_merge	[MM]
+			Enable merging of slabs with similar size when the
+			kernel is built without CONFIG_SLAB_MERGE_DEFAULT.
+			(slub_merge legacy name also accepted for now)
+
+	slab_min_objects=	[MM]
 			The minimum number of objects per slab. SLUB will
-			increase the slab order up to slub_max_order to
+			increase the slab order up to slab_max_order to
 			generate a sufficiently large slab able to contain
 			the number of objects indicated. The higher the number
 			of objects the smaller the overhead of tracking slabs
 			and the less frequently locks need to be acquired.
 			For more information see Documentation/mm/slub.rst.
+			(slub_min_objects legacy name also accepted for now)
 
-	slub_min_order=	[MM, SLUB]
+	slab_min_order=	[MM]
 			Determines the minimum page order for slabs. Must be
-			lower than slub_max_order.
-			For more information see Documentation/mm/slub.rst.
+			lower or equal to slab_max_order. For more information see
+			Documentation/mm/slub.rst.
+			(slub_min_order legacy name also accepted for now)
 
-	slub_merge	[MM, SLUB]
-			Same with slab_merge.
+	slab_nomerge	[MM]
+			Disable merging of slabs with similar size. May be
+			necessary if there is some reason to distinguish
+			allocs to different slabs, especially in hardened
+			environments where the risk of heap overflows and
+			layout control by attackers can usually be
+			frustrated by disabling merging. This will reduce
+			most of the exposure of a heap attack to a single
+			cache (risks via metadata attacks are mostly
+			unchanged). Debug options disable merging on their
+			own.
+			For more information see Documentation/mm/slub.rst.
+			(slub_nomerge legacy name also accepted for now)
 
-	slub_nomerge	[MM, SLUB]
-			Same with slab_nomerge. This is supported for legacy.
-			See slab_nomerge for more information.
+	slram=		[HW,MTD]
 
 	smart2=		[HW]
 			Format: <io1>[,<io2>[,...,<io8>]]
@@ -5987,10 +6042,10 @@
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	smt=		[KNL,MIPS,S390] Set the maximum number of threads (logical
-			CPUs) to use per physical CPU on systems capable of
-			symmetric multithreading (SMT). Will be capped to the
-			actual hardware limit.
+	smt=		[KNL,MIPS,S390,EARLY] Set the maximum number of threads
+			(logical CPUs) to use per physical CPU on systems
+			capable of symmetric multithreading (SMT). Will
+			be capped to the actual hardware limit.
 			Format: <integer>
 			Default: -1 (no limit)
 
@@ -6012,7 +6067,16 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/admin-guide/laptops/sonypi.rst
 
-	spectre_v2=	[X86] Control mitigation of Spectre variant 2
+	spectre_bhi=	[X86] Control mitigation of Branch History Injection
+			(BHI) vulnerability.  This setting affects the
+			deployment of the HW BHI control and the SW BHB
+			clearing sequence.
+
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+
+	spectre_v2=	[X86,EARLY] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
 			The default operation protects the kernel from
 			user space attacks.
@@ -6027,8 +6091,8 @@
 			Selecting 'on' will, and 'auto' may, choose a
 			mitigation method at run time according to the
 			CPU, the available microcode, the setting of the
-			CONFIG_RETPOLINE configuration option, and the
-			compiler with which the kernel was built.
+			CONFIG_MITIGATION_RETPOLINE configuration option,
+			and the compiler with which the kernel was built.
 
 			Selecting 'on' will also enable the mitigation
 			against user space to user space task attacks.
@@ -6092,7 +6156,7 @@
 			spectre_v2_user=auto.
 
 	spec_rstack_overflow=
-			[X86] Control RAS overflow mitigation on AMD Zen CPUs
+			[X86,EARLY] Control RAS overflow mitigation on AMD Zen CPUs
 
 			off		- Disable mitigation
 			microcode	- Enable microcode mitigation only
@@ -6103,7 +6167,7 @@
 					  (cloud-specific mitigation)
 
 	spec_store_bypass_disable=
-			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
+			[HW,EARLY] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
 
 			Certain CPUs are vulnerable to an exploit against a
@@ -6199,7 +6263,7 @@
 			#DB exception for bus lock is triggered only when
 			CPL > 0.
 
-	srbds=		[X86,INTEL]
+	srbds=		[X86,INTEL,EARLY]
 			Control the Special Register Buffer Data Sampling
 			(SRBDS) mitigation.
 
@@ -6286,7 +6350,7 @@
 			srcutree.convert_to_big must have the 0x10 bit
 			set for contention-based conversions to occur.
 
-	ssbd=		[ARM64,HW]
+	ssbd=		[ARM64,HW,EARLY]
 			Speculative Store Bypass Disable control
 
 			On CPUs that are vulnerable to the Speculative
@@ -6310,7 +6374,7 @@
 			growing up) the main stack are reserved for no other
 			mapping. Default value is 256 pages.
 
-	stack_depot_disable= [KNL]
+	stack_depot_disable= [KNL,EARLY]
 			Setting this to true through kernel command line will
 			disable the stack depot thereby saving the static memory
 			consumed by the stack hash table. By default this is set
@@ -6349,12 +6413,12 @@
 			be used to filter out binaries which have
 			not yet been made aware of AT_MINSIGSTKSZ.
 
-	stress_hpt	[PPC]
+	stress_hpt	[PPC,EARLY]
 			Limits the number of kernel HPT entries in the hash
 			page table to increase the rate of hash page table
 			faults on kernel addresses.
 
-	stress_slb	[PPC]
+	stress_slb	[PPC,EARLY]
 			Limits the number of kernel SLB entries, and flushes
 			them frequently to increase the rate of SLB faults
 			on kernel addresses.
@@ -6414,7 +6478,7 @@
 			This parameter controls use of the Protected
 			Execution Facility on pSeries.
 
-	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
+	swiotlb=	[ARM,IA-64,PPC,MIPS,X86,EARLY]
 			Format: { <int> [,<int>] | force | noforce }
 			<int> -- Number of I/O TLB slabs
 			<int> -- Second integer after comma. Number of swiotlb
@@ -6424,7 +6488,7 @@
 			         wouldn't be automatically used by the kernel
 			noforce -- Never use bounce buffers (for debugging)
 
-	switches=	[HW,M68k]
+	switches=	[HW,M68k,EARLY]
 
 	sysctl.*=	[KNL]
 			Set a sysctl parameter, right before loading the init
@@ -6483,11 +6547,11 @@
 			<deci-seconds>: poll all this frequency
 			0: no polling (default)
 
-	threadirqs	[KNL]
+	threadirqs	[KNL,EARLY]
 			Force threading of all interrupt handlers except those
 			marked explicitly IRQF_NO_THREAD.
 
-	topology=	[S390]
+	topology=	[S390,EARLY]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu
 			topology information if the hardware supports this.
@@ -6548,7 +6612,7 @@
 			To turn off having tracepoints sent to printk,
 			 echo 0 > /proc/sys/kernel/tracepoint_printk
 			Note, echoing 1 into this file without the
-			tracepoint_printk kernel cmdline option has no effect.
+			tp_printk kernel cmdline option has no effect.
 
 			The tp_printk_stop_on_boot (see below) can also be used
 			to stop the printing of events to console at
@@ -6728,7 +6792,7 @@
 			can be overridden by a later tsc=nowatchdog.  A console
 			message will flag any such suppression or overriding.
 
-	tsc_early_khz=  [X86] Skip early TSC calibration and use the given
+	tsc_early_khz=  [X86,EARLY] Skip early TSC calibration and use the given
 			value instead. Useful when the early TSC frequency discovery
 			procedure is not reliable, such as on overclocked systems
 			with CPUID.16h support and partial CPUID.15h support.
@@ -6763,7 +6827,7 @@
 			See Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
 			for more details.
 
-	tsx_async_abort= [X86,INTEL] Control mitigation for the TSX Async
+	tsx_async_abort= [X86,INTEL,EARLY] Control mitigation for the TSX Async
 			Abort (TAA) vulnerability.
 
 			Similar to Micro-architectural Data Sampling (MDS)
@@ -6829,7 +6893,7 @@
 	unknown_nmi_panic
 			[X86] Cause panic on unknown NMI.
 
-	unwind_debug	[X86-64]
+	unwind_debug	[X86-64,EARLY]
 			Enable unwinder debug output.  This can be
 			useful for debugging certain unwinder error
 			conditions, including corrupt stacks and
@@ -7019,7 +7083,7 @@
 			Example: user_debug=31
 
 	userpte=
-			[X86] Flags controlling user PTE allocations.
+			[X86,EARLY] Flags controlling user PTE allocations.
 
 				nohigh = do not allocate PTE pages in
 					HIGHMEM regardless of setting
@@ -7048,7 +7112,7 @@
 	vector=		[IA-64,SMP]
 			vector=percpu: enable percpu vector domain
 
-	video=		[FB] Frame buffer configuration
+	video=		[FB,EARLY] Frame buffer configuration
 			See Documentation/fb/modedb.rst.
 
 	video.brightness_switch_enabled= [ACPI]
@@ -7096,13 +7160,13 @@
 			  P	Enable page structure init time poisoning
 			  -	Disable all of the above options
 
-	vmalloc=nn[KMG]	[KNL,BOOT] Forces the vmalloc area to have an exact
-			size of <nn>. This can be used to increase the
-			minimum size (128MB on x86). It can also be used to
-			decrease the size and leave more room for directly
-			mapped kernel RAM.
+	vmalloc=nn[KMG]	[KNL,BOOT,EARLY] Forces the vmalloc area to have an
+			exact size of <nn>. This can be used to increase
+			the minimum size (128MB on x86). It can also be
+			used to decrease the size and leave more room
+			for directly mapped kernel RAM.
 
-	vmcp_cma=nn[MG]	[KNL,S390]
+	vmcp_cma=nn[MG]	[KNL,S390,EARLY]
 			Sets the memory size reserved for contiguous memory
 			allocations for the vmcp device driver.
 
@@ -7115,7 +7179,7 @@
 	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
 			Format: <command>
 
-	vsyscall=	[X86-64]
+	vsyscall=	[X86-64,EARLY]
 			Controls the behavior of vsyscalls (i.e. calls to
 			fixed addresses of 0xffffffffff600x00 from legacy
 			code).  Most statically-linked binaries and older
@@ -7225,6 +7289,15 @@
 			threshold repeatedly. They are likely good
 			candidates for using WQ_UNBOUND workqueues instead.
 
+	workqueue.cpu_intensive_warning_thresh=<uint>
+			If CONFIG_WQ_CPU_INTENSIVE_REPORT is set, the kernel
+			will report the work functions which violate the
+			intensive_threshold_us repeatedly. In order to prevent
+			spurious warnings, start printing only after a work
+			function has violated this threshold number of times.
+
+			The default is 4 times. 0 disables the warning.
+
 	workqueue.power_efficient
 			Per-cpu workqueues are generally preferred because
 			they show better performance thanks to cache
@@ -7263,13 +7336,13 @@
 			When enabled, memory and cache locality will be
 			impacted.
 
-	writecombine=	[LOONGARCH] Control the MAT (Memory Access Type) of
-			ioremap_wc().
+	writecombine=	[LOONGARCH,EARLY] Control the MAT (Memory Access
+			Type) of ioremap_wc().
 
 			on   - Enable writecombine, use WUC for ioremap_wc()
 			off  - Disable writecombine, use SUC for ioremap_wc()
 
-	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
+	x2apic_phys	[X86-64,APIC,EARLY] Use x2apic physical mode instead of
 			default x2apic cluster mode on platforms
 			supporting x2apic.
 
@@ -7280,7 +7353,7 @@
 			save/restore/migration must be enabled to handle larger
 			domains.
 
-	xen_emul_unplug=		[HW,X86,XEN]
+	xen_emul_unplug=		[HW,X86,XEN,EARLY]
 			Unplug Xen emulated devices
 			Format: [unplug0,][unplug1]
 			ide-disks -- unplug primary master IDE devices
@@ -7292,17 +7365,17 @@
 				the unplug protocol
 			never -- do not unplug even if version check succeeds
 
-	xen_legacy_crash	[X86,XEN]
+	xen_legacy_crash	[X86,XEN,EARLY]
 			Crash from Xen panic notifier, without executing late
 			panic() code such as dumping handler.
 
-	xen_msr_safe=	[X86,XEN]
+	xen_msr_safe=	[X86,XEN,EARLY]
 			Format: <bool>
 			Select whether to always use non-faulting (safe) MSR
 			access functions when running as Xen PV guest. The
 			default value is controlled by CONFIG_XEN_PV_MSR_SAFE.
 
-	xen_nopvspin	[X86,XEN]
+	xen_nopvspin	[X86,XEN,EARLY]
 			Disables the qspinlock slowpath using Xen PV optimizations.
 			This parameter is obsoleted by "nopvspin" parameter, which
 			has equivalent effect for XEN platform.
@@ -7314,7 +7387,7 @@
 			has equivalent effect for XEN platform.
 
 	xen_no_vector_callback
-			[KNL,X86,XEN] Disable the vector callback for Xen
+			[KNL,X86,XEN,EARLY] Disable the vector callback for Xen
 			event channel interrupts.
 
 	xen_scrub_pages=	[XEN]
@@ -7323,7 +7396,7 @@
 			with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
 			Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
 
-	xen_timer_slop=	[X86-64,XEN]
+	xen_timer_slop=	[X86-64,XEN,EARLY]
 			Set the timer slop (in nanoseconds) for the virtual Xen
 			timers (default is 100000). This adjusts the minimum
 			delta of virtualized Xen timers, where lower values
@@ -7376,7 +7449,7 @@
 			host controller quirks. Meaning of each bit can be
 			consulted in header drivers/usb/host/xhci.h.
 
-	xmon		[PPC]
+	xmon		[PPC,EARLY]
 			Format: { early | on | rw | ro | off }
 			Controls if xmon debugger is enabled. Default is off.
 			Passing only "xmon" is equivalent to "xmon=early".
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 98d304010170..7f674a6cfa8a 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -444,7 +444,9 @@ event	code	Key		Notes
 
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
-				or toggle screen expand
+				or toggle screen expand.
+				On newer platforms (2024+)
+				replaced by 0x131f (see below)
 
 0x1009	0x08	FN+F9		-
 
@@ -504,6 +506,9 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
+0x131f	...	FN+F8	        Platform Mode change.
+				Implemented in driver.
+
 ...	...	...
 
 0x1020	0x1F	unknown
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/media/visl.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/media/visl.rst
index db1ef29438e1..cd45145cde68 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/media/visl.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/media/visl.rst
@@ -49,6 +49,10 @@ Module parameters
   visl_dprintk_frame_start, visl_dprintk_nframes, but controls the dumping of
   buffer data through debugfs instead.
 
+- tpg_verbose: Write extra information on each output frame to ease debugging
+  the API. When set to true, the output frames are not stable for a given input
+  as some information like pointers or queue status will be added to them.
+
 What is the default use case for this driver?
 ---------------------------------------------
 
@@ -57,8 +61,12 @@ This assumes that a working client is run against visl and that the ftrace and
 OUTPUT buffer data is subsequently used to debug a work-in-progress
 implementation.
 
-Information on reference frames, their timestamps, the status of the OUTPUT and
-CAPTURE queues and more can be read directly from the CAPTURE buffers.
+Even though no video decoding is actually done, the output frames can be used
+against a reference for a given input, except if tpg_verbose is set to true.
+
+Depending on the tpg_verbose parameter value, information on reference frames,
+their timestamps, the status of the OUTPUT and CAPTURE queues and more can be
+read directly from the CAPTURE buffers.
 
 Supported codecs
 ----------------
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/media/vivid.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/media/vivid.rst
index 58ac25b2c385..b6f658c0997e 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/media/vivid.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/media/vivid.rst
@@ -60,7 +60,7 @@ all configurable using the following module options:
 - node_types:
 
 	which devices should each driver instance create. An array of
-	hexadecimal values, one for each instance. The default is 0x1d3d.
+	hexadecimal values, one for each instance. The default is 0xe1d3d.
 	Each value is a bitmask with the following meaning:
 
 		- bit 0: Video Capture node
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/mm/damon/reclaim.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
index 343e25b252f4..af05ae617018 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -117,6 +117,33 @@ milliseconds.
 
 1 second by default.
 
+quota_mem_pressure_us
+---------------------
+
+Desired level of memory pressure-stall time in microseconds.
+
+While keeping the caps that set by other quotas, DAMON_RECLAIM automatically
+increases and decreases the effective level of the quota aiming this level of
+memory pressure is incurred.  System-wide ``some`` memory PSI in microseconds
+per quota reset interval (``quota_reset_interval_ms``) is collected and
+compared to this value to see if the aim is satisfied.  Value zero means
+disabling this auto-tuning feature.
+
+Disabled by default.
+
+quota_autotune_feedback
+-----------------------
+
+User-specifiable feedback for auto-tuning of the effective quota.
+
+While keeping the caps that set by other quotas, DAMON_RECLAIM automatically
+increases and decreases the effective level of the quota aiming receiving this
+feedback of value ``10,000`` from the user.  DAMON_RECLAIM assumes the feedback
+value and the quota are positively proportional.  Value zero means disabling
+this auto-tuning feature.
+
+Disabled by default.
+
 wmarks_interval
 ---------------
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/damon/usage.rst
index 9d23144bf985..6fce035fdbf5 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -83,10 +83,10 @@ comma (",").
     │ │ │ │ │ │ │ │ sz/min,max
     │ │ │ │ │ │ │ │ nr_accesses/min,max
     │ │ │ │ │ │ │ │ age/min,max
-    │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms
+    │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms,effective_bytes
     │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
     │ │ │ │ │ │ │ │ :ref:`goals <sysfs_schemes_quota_goals>`/nr_goals
-    │ │ │ │ │ │ │ │ │ 0/target_value,current_value
+    │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value
     │ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low
     │ │ │ │ │ │ │ :ref:`filters <sysfs_filters>`/nr_filters
     │ │ │ │ │ │ │ │ 0/type,matching,memcg_id
@@ -153,6 +153,9 @@ Users can write below commands for the kdamond to the ``state`` file.
 - ``clear_schemes_tried_regions``: Clear the DAMON-based operating scheme
   action tried regions directory for each DAMON-based operation scheme of the
   kdamond.
+- ``update_schemes_effective_bytes``: Update the contents of
+  ``effective_bytes`` files for each DAMON-based operation scheme of the
+  kdamond.  For more details, refer to :ref:`quotas directory <sysfs_quotas>`.
 
 If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread.
 
@@ -180,19 +183,14 @@ In each context directory, two files (``avail_operations`` and ``operations``)
 and three directories (``monitoring_attrs``, ``targets``, and ``schemes``)
 exist.
 
-DAMON supports multiple types of monitoring operations, including those for
-virtual address space and the physical address space.  You can get the list of
-available monitoring operations set on the currently running kernel by reading
+DAMON supports multiple types of :ref:`monitoring operations
+<damon_design_configurable_operations_set>`, including those for virtual address
+space and the physical address space.  You can get the list of available
+monitoring operations set on the currently running kernel by reading
 ``avail_operations`` file.  Based on the kernel configuration, the file will
-list some or all of below keywords.
-
- - vaddr: Monitor virtual address spaces of specific processes
- - fvaddr: Monitor fixed virtual address ranges
- - paddr: Monitor the physical address space of the system
-
-Please refer to :ref:`regions sysfs directory <sysfs_regions>` for detailed
-differences between the operations sets in terms of the monitoring target
-regions.
+list different available operation sets.  Please refer to the :ref:`design
+<damon_operations_set>` for the list of all available operation sets and their
+brief explanations.
 
 You can set and get what type of monitoring operations DAMON will use for the
 context by writing one of the keywords listed in ``avail_operations`` file and
@@ -247,17 +245,11 @@ process to the ``pid_target`` file.
 targets/<N>/regions
 -------------------
 
-When ``vaddr`` monitoring operations set is being used (``vaddr`` is written to
-the ``contexts/<N>/operations`` file), DAMON automatically sets and updates the
-monitoring target regions so that entire memory mappings of target processes
-can be covered.  However, users could want to set the initial monitoring region
-to specific address ranges.
-
-In contrast, DAMON do not automatically sets and updates the monitoring target
-regions when ``fvaddr`` or ``paddr`` monitoring operations sets are being used
-(``fvaddr`` or ``paddr`` have written to the ``contexts/<N>/operations``).
-Therefore, users should set the monitoring target regions by themselves in the
-cases.
+In case of ``fvaddr`` or ``paddr`` monitoring operations sets, users are
+required to set the monitoring target address ranges.  In case of ``vaddr``
+operations set, it is not mandatory, but users can optionally set the initial
+monitoring region to specific address ranges.  Please refer to the :ref:`design
+<damon_design_vaddr_target_regions_construction>` for more details.
 
 For such cases, users can explicitly set the initial monitoring target regions
 as they want, by writing proper values to the files under this directory.
@@ -302,27 +294,8 @@ In each scheme directory, five directories (``access_pattern``, ``quotas``,
 
 The ``action`` file is for setting and getting the scheme's :ref:`action
 <damon_design_damos_action>`.  The keywords that can be written to and read
-from the file and their meaning are as below.
-
-Note that support of each action depends on the running DAMON operations set
-:ref:`implementation <sysfs_context>`.
-
- - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``.
-   Supported by ``vaddr`` and ``fvaddr`` operations set.
- - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``.
-   Supported by ``vaddr`` and ``fvaddr`` operations set.
- - ``pageout``: Call ``madvise()`` for the region with ``MADV_PAGEOUT``.
-   Supported by ``vaddr``, ``fvaddr`` and ``paddr`` operations set.
- - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``.
-   Supported by ``vaddr`` and ``fvaddr`` operations set.
- - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``.
-   Supported by ``vaddr`` and ``fvaddr`` operations set.
- - ``lru_prio``: Prioritize the region on its LRU lists.
-   Supported by ``paddr`` operations set.
- - ``lru_deprio``: Deprioritize the region on its LRU lists.
-   Supported by ``paddr`` operations set.
- - ``stat``: Do nothing but count the statistics.
-   Supported by all operations sets.
+from the file and their meaning are same to those of the list on
+:ref:`design doc <damon_design_damos_action>`.
 
 The ``apply_interval_us`` file is for setting and getting the scheme's
 :ref:`apply_interval <damon_design_damos>` in microseconds.
@@ -350,8 +323,9 @@ schemes/<N>/quotas/
 The directory for the :ref:`quotas <damon_design_damos_quotas>` of the given
 DAMON-based operation scheme.
 
-Under ``quotas`` directory, three files (``ms``, ``bytes``,
-``reset_interval_ms``) and two directores (``weights`` and ``goals``) exist.
+Under ``quotas`` directory, four files (``ms``, ``bytes``,
+``reset_interval_ms``, ``effective_bytes``) and two directores (``weights`` and
+``goals``) exist.
 
 You can set the ``time quota`` in milliseconds, ``size quota`` in bytes, and
 ``reset interval`` in milliseconds by writing the values to the three files,
@@ -359,7 +333,17 @@ respectively.  Then, DAMON tries to use only up to ``time quota`` milliseconds
 for applying the ``action`` to memory regions of the ``access_pattern``, and to
 apply the action to only up to ``bytes`` bytes of memory regions within the
 ``reset_interval_ms``.  Setting both ``ms`` and ``bytes`` zero disables the
-quota limits.
+quota limits unless at least one :ref:`goal <sysfs_schemes_quota_goals>` is
+set.
+
+The time quota is internally transformed to a size quota.  Between the
+transformed size quota and user-specified size quota, smaller one is applied.
+Based on the user-specified :ref:`goal <sysfs_schemes_quota_goals>`, the
+effective size quota is further adjusted.  Reading ``effective_bytes`` returns
+the current effective size quota.  The file is not updated in real time, so
+users should ask DAMON sysfs interface to update the content of the file for
+the stats by writing a special keyword, ``update_schemes_effective_bytes`` to
+the relevant ``kdamonds/<N>/state`` file.
 
 Under ``weights`` directory, three files (``sz_permil``,
 ``nr_accesses_permil``, and ``age_permil``) exist.
@@ -382,11 +366,11 @@ number (``N``) to the file creates the number of child directories named ``0``
 to ``N-1``.  Each directory represents each goal and current achievement.
 Among the multiple feedback, the best one is used.
 
-Each goal directory contains two files, namely ``target_value`` and
-``current_value``.  Users can set and get any number to those files to set the
-feedback.  User space main workload's latency or throughput, system metrics
-like free memory ratio or memory pressure stall time (PSI) could be example
-metrics for the values.  Note that users should write
+Each goal directory contains three files, namely ``target_metric``,
+``target_value`` and ``current_value``.  Users can set and get the three
+parameters for the quota auto-tuning goals that specified on the :ref:`design
+doc <damon_design_damos_quotas_auto_tuning>` by writing to and reading from each
+of the files.  Note that users should further write
 ``commit_schemes_quota_goals`` to the ``state`` file of the :ref:`kdamond
 directory <sysfs_kdamond>` to pass the feedback to DAMON.
 
@@ -579,11 +563,11 @@ monitoring results recording.
 While the monitoring is turned on, you could record the tracepoint events and
 show results using tracepoint supporting tools like ``perf``.  For example::
 
-    # echo on > monitor_on
+    # echo on > kdamonds/0/state
     # perf record -e damon:damon_aggregated &
     # sleep 5
     # kill 9 $(pidof perf)
-    # echo off > monitor_on
+    # echo off > kdamonds/0/state
     # perf script
     kdamond.0 46568 [027] 79357.842179: damon:damon_aggregated: target_id=0 nr_regions=11 122509119488-135708762112: 0 864
     [...]
@@ -628,9 +612,17 @@ debugfs Interface (DEPRECATED!)
   move, please report your usecase to damon@lists.linux.dev and
   linux-mm@kvack.org.
 
-DAMON exports eight files, ``attrs``, ``target_ids``, ``init_regions``,
-``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` and
-``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
+DAMON exports nine files, ``DEPRECATED``, ``attrs``, ``target_ids``,
+``init_regions``, ``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``,
+``mk_contexts`` and ``rm_contexts`` under its debugfs directory,
+``<debugfs>/damon/``.
+
+
+``DEPRECATED`` is a read-only file for the DAMON debugfs interface deprecation
+notice.  Reading it returns the deprecation notice, as below::
+
+    # cat DEPRECATED
+    DAMON debugfs interface is deprecated, so users should move to DAMON_SYSFS. If you cannot, please report your usecase to damon@lists.linux.dev and linux-mm@kvack.org.
 
 
 Attributes
@@ -755,19 +747,17 @@ Action
 ~~~~~~
 
 The ``<action>`` is a predefined integer for memory management :ref:`actions
-<damon_design_damos_action>`.  The supported numbers and their meanings are as
-below.
-
- - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``.  Ignored if
-   ``target`` is ``paddr``.
- - 1: Call ``madvise()`` for the region with ``MADV_COLD``.  Ignored if
-   ``target`` is ``paddr``.
- - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``.
- - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``.  Ignored if
-   ``target`` is ``paddr``.
- - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``.  Ignored if
-   ``target`` is ``paddr``.
- - 5: Do nothing but count the statistics
+<damon_design_damos_action>`.  The mapping between the ``<action>`` values and
+the memory management actions is as below.  For the detailed meaning of the
+action and DAMON operations set supporting each action, please refer to the
+list on :ref:`design doc <damon_design_damos_action>`.
+
+ - 0: ``willneed``
+ - 1: ``cold``
+ - 2: ``pageout``
+ - 3: ``hugepage``
+ - 4: ``nohugepage``
+ - 5: ``stat``
 
 Quota
 ~~~~~
@@ -848,16 +838,16 @@ Turning On/Off
 
 Setting the files as described above doesn't incur effect unless you explicitly
 start the monitoring.  You can start, stop, and check the current status of the
-monitoring by writing to and reading from the ``monitor_on`` file.  Writing
-``on`` to the file starts the monitoring of the targets with the attributes.
-Writing ``off`` to the file stops those.  DAMON also stops if every target
-process is terminated.  Below example commands turn on, off, and check the
-status of DAMON::
+monitoring by writing to and reading from the ``monitor_on_DEPRECATED`` file.
+Writing ``on`` to the file starts the monitoring of the targets with the
+attributes.  Writing ``off`` to the file stops those.  DAMON also stops if
+every target process is terminated.  Below example commands turn on, off, and
+check the status of DAMON::
 
     # cd <debugfs>/damon
-    # echo on > monitor_on
-    # echo off > monitor_on
-    # cat monitor_on
+    # echo on > monitor_on_DEPRECATED
+    # echo off > monitor_on_DEPRECATED
+    # cat monitor_on_DEPRECATED
     off
 
 Please note that you cannot write to the above-mentioned debugfs files while
@@ -873,11 +863,11 @@ can get the pid of the thread by reading the ``kdamond_pid`` file.  When the
 monitoring is turned off, reading the file returns ``none``. ::
 
     # cd <debugfs>/damon
-    # cat monitor_on
+    # cat monitor_on_DEPRECATED
     off
     # cat kdamond_pid
     none
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # cat kdamond_pid
     18594
 
@@ -907,5 +897,5 @@ directory by putting the name of the context to the ``rm_contexts`` file. ::
     # ls foo
     # ls: cannot access 'foo': No such file or directory
 
-Note that ``mk_contexts``, ``rm_contexts``, and ``monitor_on`` files are in the
-root directory only.
+Note that ``mk_contexts``, ``rm_contexts``, and ``monitor_on_DEPRECATED`` files
+are in the root directory only.
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/mm/numa_memory_policy.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/numa_memory_policy.rst
index eca38fa81e0f..a70f20ce1ffb 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -250,6 +250,15 @@ MPOL_PREFERRED_MANY
 	can fall back to all existing numa nodes. This is effectively
 	MPOL_PREFERRED allowed for a mask rather than a single node.
 
+MPOL_WEIGHTED_INTERLEAVE
+	This mode operates the same as MPOL_INTERLEAVE, except that
+	interleaving behavior is executed based on weights set in
+	/sys/kernel/mm/mempolicy/weighted_interleave/
+
+	Weighted interleave allocates pages on nodes according to a
+	weight.  For example if nodes [0,1] are weighted [5,2], 5 pages
+	will be allocated on node0 for every 2 pages allocated on node1.
+
 NUMA memory policy supports the following optional mode flags:
 
 MPOL_F_STATIC_NODES
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/mm/zswap.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/zswap.rst
index b42132969e31..13632671adae 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/mm/zswap.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/mm/zswap.rst
@@ -155,7 +155,7 @@ Setting this parameter to 100 will disable the hysteresis.
 
 Some users cannot tolerate the swapping that comes with zswap store failures
 and zswap writebacks. Swapping can be disabled entirely (without disabling
-zswap itself) on a cgroup-basis as follows:
+zswap itself) on a cgroup-basis as follows::
 
 	echo 0 > /sys/fs/cgroup/<cgroup-name>/memory.zswap.writeback
 
@@ -166,7 +166,7 @@ writeback (because the same pages might be rejected again and again).
 When there is a sizable amount of cold memory residing in the zswap pool, it
 can be advantageous to proactively write these cold pages to swap and reclaim
 the memory for other use cases. By default, the zswap shrinker is disabled.
-User can enable it as follows:
+User can enable it as follows::
 
   echo Y > /sys/module/zswap/parameters/shrinker_enabled
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
index 7e863662e2d4..5541ff40e06a 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -37,9 +37,21 @@ Example usage of perf::
   hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
   ------------------------------------------
 
-  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
-  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
-  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0xffff/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt,port=0xffff/
+
+The related events usually used to calculate the bandwidth, latency or others.
+They need to start and end counting at the same time, therefore related events
+are best used in the same event group to get the expected value. There are two
+ways to know if they are related events:
+
+a) By event name, such as the latency events "xxx_latency, xxx_cnt" or
+   bandwidth events "xxx_flux, xxx_time".
+b) By event type, such as "event=0xXXXX, event=0x1XXXX".
+
+Example usage of perf group::
+
+  $# perf stat -e "{hisi_pcie0_core0/rx_mwr_latency,port=0xffff/,hisi_pcie0_core0/rx_mwr_cnt,port=0xffff/}"
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported for PCIe PMU.
@@ -51,8 +63,12 @@ Filter options
 
    PMU could only monitor the performance of traffic downstream target Root
    Ports or downstream target Endpoint. PCIe PMU driver support "port" and
-   "bdf" interfaces for users, and these two interfaces aren't supported at the
-   same time.
+   "bdf" interfaces for users.
+   Please notice that, one of these two interfaces must be set, and these two
+   interfaces aren't supported at the same time. If they are both set, only
+   "port" filter is valid.
+   If "port" filter not being set or is set explicitly to zero (default), the
+   "bdf" filter will be in effect, because "bdf=0" meaning 0000:000:00.0.
 
    - port
 
@@ -95,7 +111,7 @@ Filter options
 
    Example usage of perf::
 
-     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,trig_len=0x4,trig_mode=1/ sleep 5
 
 3. Threshold filter
 
@@ -109,7 +125,7 @@ Filter options
 
    Example usage of perf::
 
-     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,thr_len=0x4,thr_mode=1/ sleep 5
 
 4. TLP Length filter
 
@@ -127,4 +143,4 @@ Filter options
 
    Example usage of perf::
 
-     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,port=0xffff,len_mode=0x1/ sleep 5
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/perf/index.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/perf/index.rst
index f4a4513c526f..7eb3dcd6f4da 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/perf/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/perf/index.rst
@@ -13,6 +13,7 @@ Performance monitor support
    imx-ddr
    qcom_l2_pmu
    qcom_l3_pmu
+   starfive_starlink_pmu
    arm-ccn
    arm-cmn
    xgene-pmu
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/perf/starfive_starlink_pmu.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/perf/starfive_starlink_pmu.rst
new file mode 100644
index 000000000000..2932ddb4eb76
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/perf/starfive_starlink_pmu.rst
@@ -0,0 +1,46 @@
+================================================
+StarFive StarLink Performance Monitor Unit (PMU)
+================================================
+
+StarFive StarLink Performance Monitor Unit (PMU) exists within the
+StarLink Coherent Network on Chip (CNoC) that connects multiple CPU
+clusters with an L3 memory system.
+
+The uncore PMU supports overflow interrupt, up to 16 programmable 64bit
+event counters, and an independent 64bit cycle counter.
+The PMU can only be accessed via Memory Mapped I/O and are common to the
+cores connected to the same PMU.
+
+Driver exposes supported PMU events in sysfs "events" directory under::
+
+  /sys/bus/event_source/devices/starfive_starlink_pmu/events/
+
+Driver exposes cpu used to handle PMU events in sysfs "cpumask" directory
+under::
+
+  /sys/bus/event_source/devices/starfive_starlink_pmu/cpumask/
+
+Driver describes the format of config (event ID) in sysfs "format" directory
+under::
+
+  /sys/bus/event_source/devices/starfive_starlink_pmu/format/
+
+Example of perf usage::
+
+	$ perf list
+
+	starfive_starlink_pmu/cycles/                      [Kernel PMU event]
+	starfive_starlink_pmu/read_hit/                    [Kernel PMU event]
+	starfive_starlink_pmu/read_miss/                   [Kernel PMU event]
+	starfive_starlink_pmu/read_request/                [Kernel PMU event]
+	starfive_starlink_pmu/release_request/             [Kernel PMU event]
+	starfive_starlink_pmu/write_hit/                   [Kernel PMU event]
+	starfive_starlink_pmu/write_miss/                  [Kernel PMU event]
+	starfive_starlink_pmu/write_request/               [Kernel PMU event]
+	starfive_starlink_pmu/writeback/                   [Kernel PMU event]
+
+
+	$ perf stat -a -e /starfive_starlink_pmu/cycles/ sleep 1
+
+Sampling is not supported. As a result, "perf record" is not supported.
+Attaching to a task is not supported, only system-wide counting is supported.
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/pm/amd-pstate.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/pm/amd-pstate.rst
index 9eb26014d34b..1e0d101b020a 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/pm/amd-pstate.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/pm/amd-pstate.rst
@@ -300,8 +300,8 @@ platforms. The AMD P-States mechanism is the more performance and energy
 efficiency frequency management method on AMD processors.
 
 
-AMD Pstate Driver Operation Modes
-=================================
+``amd-pstate`` Driver Operation Modes
+======================================
 
 ``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode,
 non-autonomous (passive) mode and guided autonomous (guided) mode.
@@ -353,6 +353,48 @@ is activated.  In this mode, driver requests minimum and maximum performance
 level and the platform autonomously selects a performance level in this range
 and appropriate to the current workload.
 
+``amd-pstate`` Preferred Core
+=================================
+
+The core frequency is subjected to the process variation in semiconductors.
+Not all cores are able to reach the maximum frequency respecting the
+infrastructure limits. Consequently, AMD has redefined the concept of
+maximum frequency of a part. This means that a fraction of cores can reach
+maximum frequency. To find the best process scheduling policy for a given
+scenario, OS needs to know the core ordering informed by the platform through
+highest performance capability register of the CPPC interface.
+
+``amd-pstate`` preferred core enables the scheduler to prefer scheduling on
+cores that can achieve a higher frequency with lower voltage. The preferred
+core rankings can dynamically change based on the workload, platform conditions,
+thermals and ageing.
+
+The priority metric will be initialized by the ``amd-pstate`` driver. The ``amd-pstate``
+driver will also determine whether or not ``amd-pstate`` preferred core is
+supported by the platform.
+
+``amd-pstate`` driver will provide an initial core ordering when the system boots.
+The platform uses the CPPC interfaces to communicate the core ranking to the
+operating system and scheduler to make sure that OS is choosing the cores
+with highest performance firstly for scheduling the process. When ``amd-pstate``
+driver receives a message with the highest performance change, it will
+update the core ranking and set the cpu's priority.
+
+``amd-pstate`` Preferred Core Switch
+=====================================
+Kernel Parameters
+-----------------
+
+``amd-pstate`` peferred core`` has two states: enable and disable.
+Enable/disable states can be chosen by different kernel parameters.
+Default enable ``amd-pstate`` preferred core.
+
+``amd_prefcore=disable``
+
+For systems that support ``amd-pstate`` preferred core, the core rankings will
+always be advertised by the platform. But OS can choose to ignore that via the
+kernel parameter ``amd_prefcore=disable``.
+
 User Space Interface in ``sysfs`` - General
 ===========================================
 
@@ -385,6 +427,19 @@ control its functionality at the system level.  They are located in the
         to the operation mode represented by that string - or to be
         unregistered in the "disable" case.
 
+``prefcore``
+	Preferred core state of the driver: "enabled" or "disabled".
+
+	"enabled"
+		Enable the ``amd-pstate`` preferred core.
+
+	"disabled"
+		Disable the ``amd-pstate`` preferred core
+
+
+        This attribute is read-only to check the state of preferred core set
+        by the kernel parameter.
+
 ``cpupower`` tool support for ``amd-pstate``
 ===============================================
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/reporting-regressions.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/reporting-regressions.rst
index d8adccdae23f..76b246ecf21b 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/reporting-regressions.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/reporting-regressions.rst
@@ -31,7 +31,7 @@ The important bits (aka "TL;DR")
    Linux kernel regression tracking bot "regzbot" track the issue by specifying
    when the regression started like this::
 
-       #regzbot introduced v5.13..v5.14-rc1
+       #regzbot introduced: v5.13..v5.14-rc1
 
 
 All the details on Linux kernel regressions relevant for users
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 6584a1f9bfe3..7fd43947832f 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -296,12 +296,30 @@ kernel panic). This will output the contents of the ftrace buffers to
 the console.  This is very useful for capturing traces that lead to
 crashes and outputting them to a serial console.
 
-= ===================================================
-0 Disabled (default).
-1 Dump buffers of all CPUs.
-2 Dump the buffer of the CPU that triggered the oops.
-= ===================================================
+======================= ===========================================
+0                       Disabled (default).
+1                       Dump buffers of all CPUs.
+2(orig_cpu)             Dump the buffer of the CPU that triggered the
+                        oops.
+<instance>              Dump the specific instance buffer on all CPUs.
+<instance>=2(orig_cpu)  Dump the specific instance buffer on the CPU
+                        that triggered the oops.
+======================= ===========================================
 
+Multiple instance dump is also supported, and instances are separated
+by commas. If global buffer also needs to be dumped, please specify
+the dump mode (1/2/orig_cpu) first for global buffer.
+
+So for example to dump "foo" and "bar" instance buffer on all CPUs,
+user can::
+
+  echo "foo,bar" > /proc/sys/kernel/ftrace_dump_on_oops
+
+To dump global buffer and "foo" instance buffer on all
+CPUs along with the "bar" instance buffer on CPU that triggered the
+oops, user can::
+
+  echo "1,foo,bar=2" > /proc/sys/kernel/ftrace_dump_on_oops
 
 ftrace_enabled, stack_tracer_enabled
 ====================================
@@ -594,6 +612,9 @@ default (``MSGMNB``).
 ``msgmni`` is the maximum number of IPC queues. 32000 by default
 (``MSGMNI``).
 
+All of these parameters are set per ipc namespace. The maximum number of bytes
+in POSIX message queues is limited by ``RLIMIT_MSGQUEUE``. This limit is
+respected hierarchically in the each user namespace.
 
 msg_next_id, sem_next_id, and shm_next_id (System V IPC)
 ========================================================
@@ -850,6 +871,7 @@ bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
 bit 5  print all printk messages in buffer
 bit 6  print all CPUs backtrace (if available in the arch)
+bit 7  print only tasks in uninterruptible (blocked) state
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1274,15 +1296,20 @@ are doing anyway :)
 shmall
 ======
 
-This parameter sets the total amount of shared memory pages that
-can be used system wide. Hence, ``shmall`` should always be at least
-``ceil(shmmax/PAGE_SIZE)``.
+This parameter sets the total amount of shared memory pages that can be used
+inside ipc namespace. The shared memory pages counting occurs for each ipc
+namespace separately and is not inherited. Hence, ``shmall`` should always be at
+least ``ceil(shmmax/PAGE_SIZE)``.
 
 If you are not sure what the default ``PAGE_SIZE`` is on your Linux
 system, you can run the following command::
 
 	# getconf PAGE_SIZE
 
+To reduce or disable the ability to allocate shared memory, you must create a
+new ipc namespace, set this parameter to the required value and prohibit the
+creation of a new ipc namespace in the current user namespace or cgroups can
+be used.
 
 shmmax
 ======
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/sysctl/net.rst
index 396091651955..7250c0542828 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -206,6 +206,11 @@ Will increase power usage.
 
 Default: 0 (off)
 
+mem_pcpu_rsv
+------------
+
+Per-cpu reserved forward alloc cache size in page units. Default 1MB per CPU.
+
 rmem_default
 ------------
 
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/tainted-kernels.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/tainted-kernels.rst
index 92a8a07f5c43..f92551539e8a 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/tainted-kernels.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/tainted-kernels.rst
@@ -34,7 +34,7 @@ name of the command ('Comm:') that triggered the event::
 
 You'll find a 'Not tainted: ' there if the kernel was not tainted at the
 time of the event; if it was, then it will print 'Tainted: ' and characters
-either letters or blanks. In above example it looks like this::
+either letters or blanks. In the example above it looks like this::
 
 	Tainted: P        W  O
 
@@ -52,7 +52,7 @@ At runtime, you can query the tainted state by reading
 tainted; any other number indicates the reasons why it is. The easiest way to
 decode that number is the script ``tools/debugging/kernel-chktaint``, which your
 distribution might ship as part of a package called ``linux-tools`` or
-``kernel-tools``; if it doesn't you can download the script from
+``kernel-tools``; if it doesn't, you can download the script from
 `git.kernel.org <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/tools/debugging/kernel-chktaint>`_
 and execute it with ``sh kernel-chktaint``, which would print something like
 this on the machine that had the statements in the logs that were quoted earlier::
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst linux-libre-6.9-rc6-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
new file mode 100644
index 000000000000..c389d4fd7599
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
@@ -0,0 +1,2222 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR CC-BY-4.0)
+.. [see the bottom of this file for redistribution information]
+
+=========================================
+How to verify bugs and bisect regressions
+=========================================
+
+This document describes how to check if some Linux kernel problem occurs in code
+currently supported by developers -- to then explain how to locate the change
+causing the issue, if it is a regression (e.g. did not happen with earlier
+versions).
+
+The text aims at people running kernels from mainstream Linux distributions on
+commodity hardware who want to report a kernel bug to the upstream Linux
+developers. Despite this intent, the instructions work just as well for users
+who are already familiar with building their own kernels: they help avoid
+mistakes occasionally made even by experienced developers.
+
+..
+   Note: if you see this note, you are reading the text's source file. You
+   might want to switch to a rendered version: it makes it a lot easier to
+   read and navigate this document -- especially when you want to look something
+   up in the reference section, then jump back to where you left off.
+..
+   Find the latest rendered version of this text here:
+   https://docs.kernel.org/admin-guide/verify-bugs-and-bisect-regressions.rst.html
+
+The essence of the process (aka 'TL;DR')
+========================================
+
+*[If you are new to building or bisecting Linux, ignore this section and head
+over to the* ':ref:`step-by-step guide <introguide_bissbs>`' *below. It utilizes
+the same commands as this section while describing them in brief fashion. The
+steps are nevertheless easy to follow and together with accompanying entries
+in a reference section mention many alternatives, pitfalls, and additional
+aspects, all of which might be essential in your present case.]*
+
+**In case you want to check if a bug is present in code currently supported by
+developers**, execute just the *preparations* and *segment 1*; while doing so,
+consider the newest Linux kernel you regularly use to be the 'working' kernel.
+In the following example that's assumed to be 6.0, which is why its sources
+will be used to prepare the .config file.
+
+**In case you face a regression**, follow the steps at least till the end of
+*segment 2*. Then you can submit a preliminary report -- or continue with
+*segment 3*, which describes how to perform a bisection needed for a
+full-fledged regression report. In the following example 6.0.13 is assumed to be
+the 'working' kernel and 6.1.5 to be the first 'broken', which is why 6.0
+will be considered the 'good' release and used to prepare the .config file.
+
+* **Preparations**: set up everything to build your own kernels::
+
+    # * Remove any software that depends on externally maintained kernel modules
+    #   or builds any automatically during bootup.
+    # * Ensure Secure Boot permits booting self-compiled Linux kernels.
+    # * If you are not already running the 'working' kernel, reboot into it.
+    # * Install compilers and everything else needed for building Linux.
+    # * Ensure to have 15 Gigabyte free space in your home directory.
+    git clone -o mainline --no-checkout \
+      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ~/linux/
+    cd ~/linux/
+    git remote add -t master stable \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+    git switch --detach v6.0
+    # * Hint: if you used an existing clone, ensure no stale .config is around.
+    make olddefconfig
+    # * Ensure the former command picked the .config of the 'working' kernel.
+    # * Connect external hardware (USB keys, tokens, ...), start a VM, bring up
+    #   VPNs, mount network shares, and briefly try the feature that is broken.
+    yes '' | make localmodconfig
+    ./scripts/config --set-str CONFIG_LOCALVERSION '-local'
+    ./scripts/config -e CONFIG_LOCALVERSION_AUTO
+    # * Note, when short on storage space, check the guide for an alternative:
+    ./scripts/config -d DEBUG_INFO_NONE -e KALLSYMS_ALL -e DEBUG_KERNEL \
+      -e DEBUG_INFO -e DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT -e KALLSYMS
+    # * Hint: at this point you might want to adjust the build configuration;
+    #   you'll have to, if you are running Debian.
+    make olddefconfig
+    cp .config ~/kernel-config-working
+
+* **Segment 1**: build a kernel from the latest mainline codebase.
+
+  This among others checks if the problem was fixed already and which developers
+  later need to be told about the problem; in case of a regression, this rules
+  out a .config change as root of the problem.
+
+  a) Checking out latest mainline code::
+
+       cd ~/linux/
+       git switch --discard-changes --detach mainline/master
+
+  b) Build, install, and boot a kernel::
+
+       cp ~/kernel-config-working .config
+       make olddefconfig
+       make -j $(nproc --all)
+       # * Make sure there is enough disk space to hold another kernel:
+       df -h /boot/ /lib/modules/
+       # * Note: on Arch Linux, its derivatives and a few other distributions
+       #   the following commands will do nothing at all or only part of the
+       #   job. See the step-by-step guide for further details.
+       sudo make modules_install
+       command -v installkernel && sudo make install
+       # * Check how much space your self-built kernel actually needs, which
+       #   enables you to make better estimates later:
+       du -ch /boot/*$(make -s kernelrelease)* | tail -n 1
+       du -sh /lib/modules/$(make -s kernelrelease)/
+       # * Hint: the output of the following command will help you pick the
+       #   right kernel from the boot menu:
+       make -s kernelrelease | tee -a ~/kernels-built
+       reboot
+       # * Once booted, ensure you are running the kernel you just built by
+       #   checking if the output of the next two commands matches:
+       tail -n 1 ~/kernels-built
+       uname -r
+       cat /proc/sys/kernel/tainted
+
+  c) Check if the problem occurs with this kernel as well.
+
+* **Segment 2**: ensure the 'good' kernel is also a 'working' kernel.
+
+  This among others verifies the trimmed .config file actually works well, as
+  bisecting with it otherwise would be a waste of time:
+
+  a) Start by checking out the sources of the 'good' version::
+
+       cd ~/linux/
+       git switch --discard-changes --detach v6.0
+
+  b) Build, install, and boot a kernel as described earlier in *segment 1,
+     section b* -- just feel free to skip the 'du' commands, as you have a rough
+     estimate already.
+
+  c) Ensure the feature that regressed with the 'broken' kernel actually works
+     with this one.
+
+* **Segment 3**: perform and validate the bisection.
+
+  a) Retrieve the sources for your 'bad' version::
+
+       git remote set-branches --add stable linux-6.1.y
+       git fetch stable
+
+  b) Initialize the bisection::
+
+       cd ~/linux/
+       git bisect start
+       git bisect good v6.0
+       git bisect bad v6.1.5
+
+  c) Build, install, and boot a kernel as described earlier in *segment 1,
+     section b*.
+
+     In case building or booting the kernel fails for unrelated reasons, run
+     ``git bisect skip``. In all other outcomes, check if the regressed feature
+     works with the newly built kernel. If it does, tell Git by executing
+     ``git bisect good``; if it does not, run ``git bisect bad`` instead.
+
+     All three commands will make Git check out another commit; then re-execute
+     this step (e.g. build, install, boot, and test a kernel to then tell Git
+     the outcome). Do so again and again until Git shows which commit broke
+     things. If you run short of disk space during this process, check the
+     section 'Complementary tasks: cleanup during and after the process'
+     below.
+
+  d) Once your finished the bisection, put a few things away::
+
+       cd ~/linux/
+       git bisect log > ~/bisect-log
+       cp .config ~/bisection-config-culprit
+       git bisect reset
+
+  e) Try to verify the bisection result::
+
+       git switch --discard-changes --detach mainline/master
+       git revert --no-edit cafec0cacaca0
+       cp ~/kernel-config-working .config
+       ./scripts/config --set-str CONFIG_LOCALVERSION '-local-cafec0cacaca0-reverted'
+
+    This is optional, as some commits are impossible to revert. But if the
+    second command worked flawlessly, build, install, and boot one more kernel
+    kernel; just this time skip the first command copying the base .config file
+    over, as that already has been taken care off.
+
+* **Complementary tasks**: cleanup during and after the process.
+
+  a) To avoid running out of disk space during a bisection, you might need to
+     remove some kernels you built earlier. You most likely want to keep those
+     you built during segment 1 and 2 around for a while, but you will most
+     likely no longer need kernels tested during the actual bisection
+     (Segment 3 c). You can list them in build order using::
+
+       ls -ltr /lib/modules/*-local*
+
+    To then for example erase a kernel that identifies itself as
+    '6.0-rc1-local-gcafec0cacaca0', use this::
+
+       sudo rm -rf /lib/modules/6.0-rc1-local-gcafec0cacaca0
+       sudo kernel-install -v remove 6.0-rc1-local-gcafec0cacaca0
+       # * Note, on some distributions kernel-install is missing
+       #   or does only part of the job.
+
+  b) If you performed a bisection and successfully validated the result, feel
+     free to remove all kernels built during the actual bisection (Segment 3 c);
+     the kernels you built earlier and later you might want to keep around for
+     a week or two.
+
+* **Optional task**: test a debug patch or a proposed fix later::
+
+    git fetch mainline
+    git switch --discard-changes --detach mainline/master
+    git apply /tmp/foobars-proposed-fix-v1.patch
+    cp ~/kernel-config-working .config
+    ./scripts/config --set-str CONFIG_LOCALVERSION '-local-foobars-fix-v1'
+
+  Build, install, and boot a kernel as described in *segment 1, section b* --
+  but this time omit the first command copying the build configuration over,
+  as that has been taken care of already.
+
+.. _introguide_bissbs:
+
+Step-by-step guide on how to verify bugs and bisect regressions
+===============================================================
+
+This guide describes how to set up your own Linux kernels for investigating bugs
+or regressions you intend to report. How far you want to follow the instructions
+depends on your issue:
+
+Execute all steps till the end of *segment 1* to **verify if your kernel problem
+is present in code supported by Linux kernel developers**. If it is, you are all
+set to report the bug -- unless it did not happen with earlier kernel versions,
+as then your want to at least continue with *segment 2* to **check if the issue
+qualifies as regression** which receive priority treatment. Depending on the
+outcome you then are ready to report a bug or submit a preliminary regression
+report; instead of the latter your could also head straight on and follow
+*segment 3* to **perform a bisection** for a full-fledged regression report
+developers are obliged to act upon.
+
+ :ref:`Preparations: set up everything to build your own kernels <introprep_bissbs>`.
+
+ :ref:`Segment 1: try to reproduce the problem with the latest codebase <introlatestcheck_bissbs>`.
+
+ :ref:`Segment 2: check if the kernels you build work fine <introworkingcheck_bissbs>`.
+
+ :ref:`Segment 3: perform a bisection and validate the result <introbisect_bissbs>`.
+
+ :ref:`Complementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
+
+ :ref:`Optional tasks: test reverts, patches, or later versions <introoptional_bissbs>`.
+
+The steps in each segment illustrate the important aspects of the process, while
+a comprehensive reference section holds additional details for almost all of the
+steps. The reference section sometimes also outlines alternative approaches,
+pitfalls, as well as problems that might occur at the particular step -- and how
+to get things rolling again.
+
+For further details on how to report Linux kernel issues or regressions check
+out Documentation/admin-guide/reporting-issues.rst, which works in conjunction
+with this document. It among others explains why you need to verify bugs with
+the latest 'mainline' kernel (e.g. versions like 6.0, 6.1-rc1, or 6.1-rc6),
+even if you face a problem with a kernel from a 'stable/longterm' series
+(say 6.0.13).
+
+For users facing a regression that document also explains why sending a
+preliminary report after segment 2 might be wise, as the regression and its
+culprit might be known already. For further details on what actually qualifies
+as a regression check out Documentation/admin-guide/reporting-regressions.rst.
+
+If you run into any problems while following this guide or have ideas how to
+improve it, :ref:`please let the kernel developers know <submit_improvements>`.
+
+.. _introprep_bissbs:
+
+Preparations: set up everything to build your own kernels
+---------------------------------------------------------
+
+The following steps lay the groundwork for all further tasks.
+
+Note: the instructions assume you are building and testing on the same
+machine; if you want to compile the kernel on another system, check
+:ref:`Build kernels on a different machine <buildhost_bis>` below.
+
+.. _backup_bissbs:
+
+* Create a fresh backup and put system repair and restore tools at hand, just
+  to be prepared for the unlikely case of something going sideways.
+
+  [:ref:`details <backup_bisref>`]
+
+.. _vanilla_bissbs:
+
+* Remove all software that depends on externally developed kernel drivers or
+  builds them automatically. That includes but is not limited to DKMS, openZFS,
+  VirtualBox, and Nvidia's graphics drivers (including the GPLed kernel module).
+
+  [:ref:`details <vanilla_bisref>`]
+
+.. _secureboot_bissbs:
+
+* On platforms with 'Secure Boot' or similar solutions, prepare everything to
+  ensure the system will permit your self-compiled kernel to boot. The
+  quickest and easiest way to achieve this on commodity x86 systems is to
+  disable such techniques in the BIOS setup utility; alternatively, remove
+  their restrictions through a process initiated by
+  ``mokutil --disable-validation``.
+
+  [:ref:`details <secureboot_bisref>`]
+
+.. _rangecheck_bissbs:
+
+* Determine the kernel versions considered 'good' and 'bad' throughout this
+  guide:
+
+  * Do you follow this guide to verify if a bug is present in the code the
+    primary developers care for? Then consider the version of the newest kernel
+    you regularly use currently as 'good' (e.g. 6.0, 6.0.13, or 6.1-rc2).
+
+  * Do you face a regression, e.g. something broke or works worse after
+    switching to a newer kernel version? In that case it depends on the version
+    range during which the problem appeared:
+
+    * Something regressed when updating from a stable/longterm release
+      (say 6.0.13) to a newer mainline series (like 6.1-rc7 or 6.1) or a
+      stable/longterm version based on one (say 6.1.5)? Then consider the
+      mainline release your working kernel is based on to be the 'good'
+      version (e.g. 6.0) and the first version to be broken as the 'bad' one
+      (e.g. 6.1-rc7, 6.1, or 6.1.5). Note, at this point it is merely assumed
+      that 6.0 is fine; this hypothesis will be checked in segment 2.
+
+    * Something regressed when switching from one mainline version (say 6.0) to
+      a later one (like 6.1-rc1) or a stable/longterm release based on it
+      (say 6.1.5)? Then regard the last working version (e.g. 6.0) as 'good' and
+      the first broken (e.g. 6.1-rc1 or 6.1.5) as 'bad'.
+
+    * Something regressed when updating within a stable/longterm series (say
+      from 6.0.13 to 6.0.15)? Then consider those versions as 'good' and 'bad'
+      (e.g. 6.0.13 and 6.0.15), as you need to bisect within that series.
+
+  *Note, do not confuse 'good' version with 'working' kernel; the latter term
+  throughout this guide will refer to the last kernel that has been working
+  fine.*
+
+  [:ref:`details <rangecheck_bisref>`]
+
+.. _bootworking_bissbs:
+
+* Boot into the 'working' kernel and briefly use the apparently broken feature.
+
+  [:ref:`details <bootworking_bisref>`]
+
+.. _diskspace_bissbs:
+
+* Ensure to have enough free space for building Linux. 15 Gigabyte in your home
+  directory should typically suffice. If you have less available, be sure to pay
+  attention to later steps about retrieving the Linux sources and handling of
+  debug symbols: both explain approaches reducing the amount of space, which
+  should allow you to master these tasks with about 4 Gigabytes free space.
+
+  [:ref:`details <diskspace_bisref>`]
+
+.. _buildrequires_bissbs:
+
+* Install all software required to build a Linux kernel. Often you will need:
+  'bc', 'binutils' ('ld' et al.), 'bison', 'flex', 'gcc', 'git', 'openssl',
+  'pahole', 'perl', and the development headers for 'libelf' and 'openssl'. The
+  reference section shows how to quickly install those on various popular Linux
+  distributions.
+
+  [:ref:`details <buildrequires_bisref>`]
+
+.. _sources_bissbs:
+
+* Retrieve the mainline Linux sources; then change into the directory holding
+  them, as all further commands in this guide are meant to be executed from
+  there.
+
+  *Note, the following describe how to retrieve the sources using a full
+  mainline clone, which downloads about 2,75 GByte as of early 2024. The*
+  :ref:`reference section describes two alternatives <sources_bisref>` *:
+  one downloads less than 500 MByte, the other works better with unreliable
+  internet connections.*
+
+  Execute the following command to retrieve a fresh mainline codebase while
+  preparing things to add branches for stable/longterm series later::
+
+    git clone -o mainline --no-checkout \
+      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ~/linux/
+    cd ~/linux/
+    git remote add -t master stable \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+  [:ref:`details <sources_bisref>`]
+
+.. _stablesources_bissbs:
+
+* Is one of the versions you earlier established as 'good' or 'bad' a stable or
+  longterm release (say 6.1.5)? Then download the code for the series it belongs
+  to ('linux-6.1.y' in this example)::
+
+    git remote set-branches --add stable linux-6.1.y
+    git fetch stable
+
+.. _oldconfig_bissbs:
+
+* Start preparing a kernel build configuration (the '.config' file).
+
+  Before doing so, ensure you are still running the 'working' kernel an earlier
+  step told you to boot; if you are unsure, check the current kernelrelease
+  identifier using ``uname -r``.
+
+  Afterwards check out the source code for the version earlier established as
+  'good'. In the following example command this is assumed to be 6.0; note that
+  the version number in this and all later Git commands needs to be prefixed
+  with a 'v'::
+
+    git switch --discard-changes --detach v6.0
+
+  Now create a build configuration file::
+
+    make olddefconfig
+
+  The kernel build scripts then will try to locate the build configuration file
+  for the running kernel and then adjust it for the needs of the kernel sources
+  you checked out. While doing so, it will print a few lines you need to check.
+
+  Look out for a line starting with '# using defaults found in'. It should be
+  followed by a path to a file in '/boot/' that contains the release identifier
+  of your currently working kernel. If the line instead continues with something
+  like 'arch/x86/configs/x86_64_defconfig', then the build infra failed to find
+  the .config file for your running kernel -- in which case you have to put one
+  there manually, as explained in the reference section.
+
+  In case you can not find such a line, look for one containing '# configuration
+  written to .config'. If that's the case you have a stale build configuration
+  lying around. Unless you intend to use it, delete it; afterwards run
+  'make olddefconfig' again and check if it now picked up the right config file
+  as base.
+
+  [:ref:`details <oldconfig_bisref>`]
+
+.. _localmodconfig_bissbs:
+
+* Disable any kernel modules apparently superfluous for your setup. This is
+  optional, but especially wise for bisections, as it speeds up the build
+  process enormously -- at least unless the .config file picked up in the
+  previous step was already tailored to your and your hardware needs, in which
+  case you should skip this step.
+
+  To prepare the trimming, connect external hardware you occasionally use (USB
+  keys, tokens, ...), quickly start a VM, and bring up VPNs. And if you rebooted
+  since you started that guide, ensure that you tried using the feature causing
+  trouble since you started the system. Only then trim your .config::
+
+     yes '' | make localmodconfig
+
+  There is a catch to this, as the 'apparently' in initial sentence of this step
+  and the preparation instructions already hinted at:
+
+  The 'localmodconfig' target easily disables kernel modules for features only
+  used occasionally -- like modules for external peripherals not yet connected
+  since booting, virtualization software not yet utilized, VPN tunnels, and a
+  few other things. That's because some tasks rely on kernel modules Linux only
+  loads when you execute tasks like the aforementioned ones for the first time.
+
+  This drawback of localmodconfig is nothing you should lose sleep over, but
+  something to keep in mind: if something is misbehaving with the kernels built
+  during this guide, this is most likely the reason. You can reduce or nearly
+  eliminate the risk with tricks outlined in the reference section; but when
+  building a kernel just for quick testing purposes this is usually not worth
+  spending much effort on, as long as it boots and allows to properly test the
+  feature that causes trouble.
+
+  [:ref:`details <localmodconfig_bisref>`]
+
+.. _tagging_bissbs:
+
+* Ensure all the kernels you will build are clearly identifiable using a special
+  tag and a unique version number::
+
+    ./scripts/config --set-str CONFIG_LOCALVERSION '-local'
+    ./scripts/config -e CONFIG_LOCALVERSION_AUTO
+
+  [:ref:`details <tagging_bisref>`]
+
+.. _debugsymbols_bissbs:
+
+* Decide how to handle debug symbols.
+
+  In the context of this document it is often wise to enable them, as there is a
+  decent chance you will need to decode a stack trace from a 'panic', 'Oops',
+  'warning', or 'BUG'::
+
+    ./scripts/config -d DEBUG_INFO_NONE -e KALLSYMS_ALL -e DEBUG_KERNEL \
+      -e DEBUG_INFO -e DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT -e KALLSYMS
+
+  But if you are extremely short on storage space, you might want to disable
+  debug symbols instead::
+
+    ./scripts/config -d DEBUG_INFO -d DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT \
+      -d DEBUG_INFO_DWARF4 -d DEBUG_INFO_DWARF5 -e CONFIG_DEBUG_INFO_NONE
+
+  [:ref:`details <debugsymbols_bisref>`]
+
+.. _configmods_bissbs:
+
+* Check if you may want or need to adjust some other kernel configuration
+  options:
+
+  * Are you running Debian? Then you want to avoid known problems by performing
+    additional adjustments explained in the reference section.
+
+    [:ref:`details <configmods_distros_bisref>`].
+
+  * If you want to influence other aspects of the configuration, do so now using
+    your preferred tool. Note, to use make targets like 'menuconfig' or
+    'nconfig', you will need to install the development files of ncurses; for
+    'xconfig' you likewise need the Qt5 or Qt6 headers.
+
+    [:ref:`details <configmods_individual_bisref>`].
+
+.. _saveconfig_bissbs:
+
+* Reprocess the .config after the latest adjustments and store it in a safe
+  place::
+
+     make olddefconfig
+     cp .config ~/kernel-config-working
+
+  [:ref:`details <saveconfig_bisref>`]
+
+.. _introlatestcheck_bissbs:
+
+Segment 1: try to reproduce the problem with the latest codebase
+----------------------------------------------------------------
+
+The following steps verify if the problem occurs with the code currently
+supported by developers. In case you face a regression, it also checks that the
+problem is not caused by some .config change, as reporting the issue then would
+be a waste of time. [:ref:`details <introlatestcheck_bisref>`]
+
+.. _checkoutmaster_bissbs:
+
+* Check out the latest Linux codebase.
+
+  * Are your 'good' and 'bad' versions from the same stable or longterm series?
+    Then check the `front page of kernel.org <https://kernel.org/>`_: if it
+    lists a release from that series without an '[EOL]' tag, checkout the series
+    latest version ('linux-6.1.y' in the following example)::
+
+      cd ~/linux/
+      git switch --discard-changes --detach stable/linux-6.1.y
+
+    Your series is unsupported, if is not listed or carrying a 'end of life'
+    tag. In that case you might want to check if a successor series (say
+    linux-6.2.y) or mainline (see next point) fix the bug.
+
+  * In all other cases, run::
+
+      cd ~/linux/
+      git switch --discard-changes --detach mainline/master
+
+  [:ref:`details <checkoutmaster_bisref>`]
+
+.. _build_bissbs:
+
+* Build the image and the modules of your first kernel using the config file you
+  prepared::
+
+    cp ~/kernel-config-working .config
+    make olddefconfig
+    make -j $(nproc --all)
+
+  If you want your kernel packaged up as deb, rpm, or tar file, see the
+  reference section for alternatives, which obviously will require other
+  steps to install as well.
+
+  [:ref:`details <build_bisref>`]
+
+.. _install_bissbs:
+
+* Install your newly built kernel.
+
+  Before doing so, consider checking if there is still enough space for it::
+
+    df -h /boot/ /lib/modules/
+
+  For now assume 150 MByte in /boot/ and 200 in /lib/modules/ will suffice; how
+  much your kernels actually require will be determined later during this guide.
+
+  Now install the kernel's modules and its image, which will be stored in
+  parallel to the your Linux distribution's kernels::
+
+    sudo make modules_install
+    command -v installkernel && sudo make install
+
+  The second command ideally will take care of three steps required at this
+  point: copying the kernel's image to /boot/, generating an initramfs, and
+  adding an entry for both to the boot loader's configuration.
+
+  Sadly some distributions (among them Arch Linux, its derivatives, and many
+  immutable Linux distributions) will perform none or only some of those tasks.
+  You therefore want to check if all of them were taken care of and manually
+  perform those that were not. The reference section provides further details on
+  that; your distribution's documentation might help, too.
+
+  Once you figured out the steps needed at this point, consider writing them
+  down: if you will build more kernels as described in segment 2 and 3, you will
+  have to perform those again after executing ``command -v installkernel [...]``.
+
+  [:ref:`details <install_bisref>`]
+
+.. _storagespace_bissbs:
+
+* In case you plan to follow this guide further, check how much storage space
+  the kernel, its modules, and other related files like the initramfs consume::
+
+    du -ch /boot/*$(make -s kernelrelease)* | tail -n 1
+    du -sh /lib/modules/$(make -s kernelrelease)/
+
+  Write down or remember those two values for later: they enable you to prevent
+  running out of disk space accidentally during a bisection.
+
+  [:ref:`details <storagespace_bisref>`]
+
+.. _kernelrelease_bissbs:
+
+* Show and store the kernelrelease identifier of the kernel you just built::
+
+    make -s kernelrelease | tee -a ~/kernels-built
+
+  Remember the identifier momentarily, as it will help you pick the right kernel
+  from the boot menu upon restarting.
+
+* Reboot into your newly built kernel. To ensure your actually started the one
+  you just built, you might want to verify if the output of these commands
+  matches::
+
+    tail -n 1 ~/kernels-built
+    uname -r
+
+.. _tainted_bissbs:
+
+* Check if the kernel marked itself as 'tainted'::
+
+    cat /proc/sys/kernel/tainted
+
+  If that command does not return '0', check the reference section, as the cause
+  for this might interfere with your testing.
+
+  [:ref:`details <tainted_bisref>`]
+
+.. _recheckbroken_bissbs:
+
+* Verify if your bug occurs with the newly built kernel. If it does not, check
+  out the instructions in the reference section to ensure nothing went sideways
+  during your tests.
+
+  [:ref:`details <recheckbroken_bisref>`]
+
+.. _recheckstablebroken_bissbs:
+
+* Did you just built a stable or longterm kernel? And were you able to reproduce
+  the regression with it? Then you should test the latest mainline codebase as
+  well, because the result determines which developers the bug must be submitted
+  to.
+
+  To prepare that test, check out current mainline::
+
+    cd ~/linux/
+    git switch --discard-changes --detach mainline/master
+
+  Now use the checked out code to build and install another kernel using the
+  commands the earlier steps already described in more detail::
+
+    cp ~/kernel-config-working .config
+    make olddefconfig
+    make -j $(nproc --all)
+    # * Check if the free space suffices holding another kernel:
+    df -h /boot/ /lib/modules/
+    sudo make modules_install
+    command -v installkernel && sudo make install
+    make -s kernelrelease | tee -a ~/kernels-built
+    reboot
+
+  Confirm you booted the kernel you intended to start and check its tainted
+  status::
+
+    tail -n 1 ~/kernels-built
+    uname -r
+    cat /proc/sys/kernel/tainted
+
+  Now verify if this kernel is showing the problem. If it does, then you need
+  to report the bug to the primary developers; if it does not, report it to the
+  stable team. See Documentation/admin-guide/reporting-issues.rst for details.
+
+  [:ref:`details <recheckstablebroken_bisref>`]
+
+Do you follow this guide to verify if a problem is present in the code
+currently supported by Linux kernel developers? Then you are done at this
+point. If you later want to remove the kernel you just built, check out
+:ref:`Complementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
+
+In case you face a regression, move on and execute at least the next segment
+as well.
+
+.. _introworkingcheck_bissbs:
+
+Segment 2: check if the kernels you build work fine
+---------------------------------------------------
+
+In case of a regression, you now want to ensure the trimmed configuration file
+you created earlier works as expected; a bisection with the .config file
+otherwise would be a waste of time. [:ref:`details <introworkingcheck_bisref>`]
+
+.. _recheckworking_bissbs:
+
+* Build your own variant of the 'working' kernel and check if the feature that
+  regressed works as expected with it.
+
+  Start by checking out the sources for the version earlier established as
+  'good' (once again assumed to be 6.0 here)::
+
+    cd ~/linux/
+    git switch --discard-changes --detach v6.0
+
+  Now use the checked out code to configure, build, and install another kernel
+  using the commands the previous subsection explained in more detail::
+
+    cp ~/kernel-config-working .config
+    make olddefconfig
+    make -j $(nproc --all)
+    # * Check if the free space suffices holding another kernel:
+    df -h /boot/ /lib/modules/
+    sudo make modules_install
+    command -v installkernel && sudo make install
+    make -s kernelrelease | tee -a ~/kernels-built
+    reboot
+
+  When the system booted, you may want to verify once again that the
+  kernel you started is the one you just built::
+
+    tail -n 1 ~/kernels-built
+    uname -r
+
+  Now check if this kernel works as expected; if not, consult the reference
+  section for further instructions.
+
+  [:ref:`details <recheckworking_bisref>`]
+
+.. _introbisect_bissbs:
+
+Segment 3: perform the bisection and validate the result
+--------------------------------------------------------
+
+With all the preparations and precaution builds taken care of, you are now ready
+to begin the bisection. This will make you build quite a few kernels -- usually
+about 15 in case you encountered a regression when updating to a newer series
+(say from 6.0.13 to 6.1.5). But do not worry, due to the trimmed build
+configuration created earlier this works a lot faster than many people assume:
+overall on average it will often just take about 10 to 15 minutes to compile
+each kernel on commodity x86 machines.
+
+.. _bisectstart_bissbs:
+
+* Start the bisection and tell Git about the versions earlier established as
+  'good' (6.0 in the following example command) and 'bad' (6.1.5)::
+
+    cd ~/linux/
+    git bisect start
+    git bisect good v6.0
+    git bisect bad v6.1.5
+
+  [:ref:`details <bisectstart_bisref>`]
+
+.. _bisectbuild_bissbs:
+
+* Now use the code Git checked out to build, install, and boot a kernel using
+  the commands introduced earlier::
+
+    cp ~/kernel-config-working .config
+    make olddefconfig
+    make -j $(nproc --all)
+    # * Check if the free space suffices holding another kernel:
+    df -h /boot/ /lib/modules/
+    sudo make modules_install
+    command -v installkernel && sudo make install
+    make -s kernelrelease | tee -a ~/kernels-built
+    reboot
+
+  If compilation fails for some reason, run ``git bisect skip`` and restart
+  executing the stack of commands from the beginning.
+
+  In case you skipped the 'test latest codebase' step in the guide, check its
+  description as for why the 'df [...]' and 'make -s kernelrelease [...]'
+  commands are here.
+
+  Important note: the latter command from this point on will print release
+  identifiers that might look odd or wrong to you -- which they are not, as it's
+  totally normal to see release identifiers like '6.0-rc1-local-gcafec0cacaca0'
+  if you bisect between versions 6.1 and 6.2 for example.
+
+  [:ref:`details <bisectbuild_bisref>`]
+
+.. _bisecttest_bissbs:
+
+* Now check if the feature that regressed works in the kernel you just built.
+
+  You again might want to start by making sure the kernel you booted is the one
+  you just built::
+
+    cd ~/linux/
+    tail -n 1 ~/kernels-built
+    uname -r
+
+  Now verify if the feature that regressed works at this kernel bisection point.
+  If it does, run this::
+
+    git bisect good
+
+  If it does not, run this::
+
+    git bisect bad
+
+  Be sure about what you tell Git, as getting this wrong just once will send the
+  rest of the bisection totally off course.
+
+  While the bisection is ongoing, Git will use the information you provided to
+  find and check out another bisection point for you to test. While doing so, it
+  will print something like 'Bisecting: 675 revisions left to test after this
+  (roughly 10 steps)' to indicate how many further changes it expects to be
+  tested. Now build and install another kernel using the instructions from the
+  previous step; afterwards follow the instructions in this step again.
+
+  Repeat this again and again until you finish the bisection -- that's the case
+  when Git after tagging a change as 'good' or 'bad' prints something like
+  'cafecaca0c0dacafecaca0c0dacafecaca0c0da is the first bad commit'; right
+  afterwards it will show some details about the culprit including the patch
+  description of the change. The latter might fill your terminal screen, so you
+  might need to scroll up to see the message mentioning the culprit;
+  alternatively, run ``git bisect log > ~/bisection-log``.
+
+  [:ref:`details <bisecttest_bisref>`]
+
+.. _bisectlog_bissbs:
+
+* Store Git's bisection log and the current .config file in a safe place before
+  telling Git to reset the sources to the state before the bisection::
+
+    cd ~/linux/
+    git bisect log > ~/bisection-log
+    cp .config ~/bisection-config-culprit
+    git bisect reset
+
+  [:ref:`details <bisectlog_bisref>`]
+
+.. _revert_bissbs:
+
+* Try reverting the culprit on top of latest mainline to see if this fixes your
+  regression.
+
+  This is optional, as it might be impossible or hard to realize. The former is
+  the case, if the bisection determined a merge commit as the culprit; the
+  latter happens if other changes depend on the culprit. But if the revert
+  succeeds, it is worth building another kernel, as it validates the result of
+  a bisection, which can easily deroute; it furthermore will let kernel
+  developers know, if they can resolve the regression with a quick revert.
+
+  Begin by checking out the latest codebase depending on the range you bisected:
+
+  * Did you face a regression within a stable/longterm series (say between
+    6.0.13 and 6.0.15) that does not happen in mainline? Then check out the
+    latest codebase for the affected series like this::
+
+      git fetch stable
+      git switch --discard-changes --detach linux-6.0.y
+
+  * In all other cases check out latest mainline::
+
+      git fetch mainline
+      git switch --discard-changes --detach mainline/master
+
+    If you bisected a regression within a stable/longterm series that also
+    happens in mainline, there is one more thing to do: look up the mainline
+    commit-id. To do so, use a command like ``git show abcdcafecabcd`` to
+    view the patch description of the culprit. There will be a line near
+    the top which looks like 'commit cafec0cacaca0 upstream.' or
+    'Upstream commit cafec0cacaca0'; use that commit-id in the next command
+    and not the one the bisection blamed.
+
+  Now try reverting the culprit by specifying its commit id::
+
+    git revert --no-edit cafec0cacaca0
+
+  If that fails, give up trying and move on to the next step; if it works,
+  adjust the tag to facilitate the identification and prevent accidentally
+  overwriting another kernel::
+
+    cp ~/kernel-config-working .config
+    ./scripts/config --set-str CONFIG_LOCALVERSION '-local-cafec0cacaca0-reverted'
+
+  Build a kernel using the familiar command sequence, just without copying the
+  the base .config over::
+
+    make olddefconfig &&
+    make -j $(nproc --all)
+    # * Check if the free space suffices holding another kernel:
+    df -h /boot/ /lib/modules/
+    sudo make modules_install
+    command -v installkernel && sudo make install
+    make -s kernelrelease | tee -a ~/kernels-built
+    reboot
+
+  Now check one last time if the feature that made you perform a bisection works
+  with that kernel: if everything went well, it should not show the regression.
+
+  [:ref:`details <revert_bisref>`]
+
+.. _introclosure_bissbs:
+
+Complementary tasks: cleanup during and after the bisection
+-----------------------------------------------------------
+
+During and after following this guide you might want or need to remove some of
+the kernels you installed: the boot menu otherwise will become confusing or
+space might run out.
+
+.. _makeroom_bissbs:
+
+* To remove one of the kernels you installed, look up its 'kernelrelease'
+  identifier. This guide stores them in '~/kernels-built', but the following
+  command will print them as well::
+
+    ls -ltr /lib/modules/*-local*
+
+  You in most situations want to remove the oldest kernels built during the
+  actual bisection (e.g. segment 3 of this guide). The two ones you created
+  beforehand (e.g. to test the latest codebase and the version considered
+  'good') might become handy to verify something later -- thus better keep them
+  around, unless you are really short on storage space.
+
+  To remove the modules of a kernel with the kernelrelease identifier
+  '*6.0-rc1-local-gcafec0cacaca0*', start by removing the directory holding its
+  modules::
+
+    sudo rm -rf /lib/modules/6.0-rc1-local-gcafec0cacaca0
+
+  Afterwards try the following command::
+
+    sudo kernel-install -v remove 6.0-rc1-local-gcafec0cacaca0
+
+  On quite a few distributions this will delete all other kernel files installed
+  while also removing the kernel's entry from the boot menu. But on some
+  distributions kernel-install does not exist or leaves boot-loader entries or
+  kernel image and related files behind; in that case remove them as described
+  in the reference section.
+
+  [:ref:`details <makeroom_bisref>`]
+
+.. _finishingtouch_bissbs:
+
+* Once you have finished the bisection, do not immediately remove anything you
+  set up, as you might need a few things again. What is safe to remove depends
+  on the outcome of the bisection:
+
+  * Could you initially reproduce the regression with the latest codebase and
+    after the bisection were able to fix the problem by reverting the culprit on
+    top of the latest codebase? Then you want to keep those two kernels around
+    for a while, but safely remove all others with a '-local' in the release
+    identifier.
+
+  * Did the bisection end on a merge-commit or seems questionable for other
+    reasons? Then you want to keep as many kernels as possible around for a few
+    days: it's pretty likely that you will be asked to recheck something.
+
+  * In other cases it likely is a good idea to keep the following kernels around
+    for some time: the one built from the latest codebase, the one created from
+    the version considered 'good', and the last three or four you compiled
+    during the actual bisection process.
+
+  [:ref:`details <finishingtouch_bisref>`]
+
+.. _introoptional_bissbs:
+
+Optional: test reverts, patches, or later versions
+--------------------------------------------------
+
+While or after reporting a bug, you might want or potentially will be asked to
+test reverts, debug patches, proposed fixes, or other versions. In that case
+follow these instructions.
+
+* Update your Git clone and check out the latest code.
+
+  * In case you want to test mainline, fetch its latest changes before checking
+    its code out::
+
+      git fetch mainline
+      git switch --discard-changes --detach mainline/master
+
+  * In case you want to test a stable or longterm kernel, first add the branch
+    holding the series you are interested in (6.2 in the example), unless you
+    already did so earlier::
+
+      git remote set-branches --add stable linux-6.2.y
+
+    Then fetch the latest changes and check out the latest version from the
+    series::
+
+      git fetch stable
+      git switch --discard-changes --detach stable/linux-6.2.y
+
+* Copy your kernel build configuration over::
+
+    cp ~/kernel-config-working .config
+
+* Your next step depends on what you want to do:
+
+  * In case you just want to test the latest codebase, head to the next step,
+    you are already all set.
+
+  * In case you want to test if a revert fixes an issue, revert one or multiple
+    changes by specifying their commit ids::
+
+      git revert --no-edit cafec0cacaca0
+
+    Now give that kernel a special tag to facilitates its identification and
+    prevent accidentally overwriting another kernel::
+
+      ./scripts/config --set-str CONFIG_LOCALVERSION '-local-cafec0cacaca0-reverted'
+
+  * In case you want to test a patch, store the patch in a file like
+    '/tmp/foobars-proposed-fix-v1.patch' and apply it like this::
+
+      git apply /tmp/foobars-proposed-fix-v1.patch
+
+    In case of multiple patches, repeat this step with the others.
+
+    Now give that kernel a special tag to facilitates its identification and
+    prevent accidentally overwriting another kernel::
+
+    ./scripts/config --set-str CONFIG_LOCALVERSION '-local-foobars-fix-v1'
+
+* Build a kernel using the familiar commands, just without copying the kernel
+  build configuration over, as that has been taken care of already::
+
+    make olddefconfig &&
+    make -j $(nproc --all)
+    # * Check if the free space suffices holding another kernel:
+    df -h /boot/ /lib/modules/
+    sudo make modules_install
+    command -v installkernel && sudo make install
+    make -s kernelrelease | tee -a ~/kernels-built
+    reboot
+
+* Now verify you booted the newly built kernel and check it.
+
+[:ref:`details <introoptional_bisref>`]
+
+.. _submit_improvements:
+
+Conclusion
+----------
+
+You have reached the end of the step-by-step guide.
+
+Did you run into trouble following any of the above steps not cleared up by the
+reference section below? Did you spot errors? Or do you have ideas how to
+improve the guide?
+
+If any of that applies, please take a moment and let the maintainer of this
+document know by email (Thorsten Leemhuis <linux@leemhuis.info>), ideally while
+CCing the Linux docs mailing list (linux-doc@vger.kernel.org). Such feedback is
+vital to improve this text further, which is in everybody's interest, as it
+will enable more people to master the task described here -- and hopefully also
+improve similar guides inspired by this one.
+
+
+Reference section for the step-by-step guide
+============================================
+
+This section holds additional information for almost all the items in the above
+step-by-step guide.
+
+Preparations for building your own kernels
+------------------------------------------
+
+  *The steps in this section lay the groundwork for all further tests.*
+  [:ref:`... <introprep_bissbs>`]
+
+The steps in all later sections of this guide depend on those described here.
+
+[:ref:`back to step-by-step guide <introprep_bissbs>`].
+
+.. _backup_bisref:
+
+Prepare for emergencies
+~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Create a fresh backup and put system repair and restore tools at hand.*
+  [:ref:`... <backup_bissbs>`]
+
+Remember, you are dealing with computers, which sometimes do unexpected things
+-- especially if you fiddle with crucial parts like the kernel of an operating
+system. That's what you are about to do in this process. Hence, better prepare
+for something going sideways, even if that should not happen.
+
+[:ref:`back to step-by-step guide <backup_bissbs>`]
+
+.. _vanilla_bisref:
+
+Remove anything related to externally maintained kernel modules
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Remove all software that depends on externally developed kernel drivers or
+  builds them automatically.* [:ref:`...<vanilla_bissbs>`]
+
+Externally developed kernel modules can easily cause trouble during a bisection.
+
+But there is a more important reason why this guide contains this step: most
+kernel developers will not care about reports about regressions occurring with
+kernels that utilize such modules. That's because such kernels are not
+considered 'vanilla' anymore, as Documentation/admin-guide/reporting-issues.rst
+explains in more detail.
+
+[:ref:`back to step-by-step guide <vanilla_bissbs>`]
+
+.. _secureboot_bisref:
+
+Deal with techniques like Secure Boot
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *On platforms with 'Secure Boot' or similar techniques, prepare everything to
+  ensure the system will permit your self-compiled kernel to boot later.*
+  [:ref:`... <secureboot_bissbs>`]
+
+Many modern systems allow only certain operating systems to start; that's why
+they reject booting self-compiled kernels by default.
+
+You ideally deal with this by making your platform trust your self-built kernels
+with the help of a certificate. How to do that is not described
+here, as it requires various steps that would take the text too far away from
+its purpose; 'Documentation/admin-guide/module-signing.rst' and various web
+sides already explain everything needed in more detail.
+
+Temporarily disabling solutions like Secure Boot is another way to make your own
+Linux boot. On commodity x86 systems it is possible to do this in the BIOS Setup
+utility; the required steps vary a lot between machines and therefore cannot be
+described here.
+
+On mainstream x86 Linux distributions there is a third and universal option:
+disable all Secure Boot restrictions for your Linux environment. You can
+initiate this process by running ``mokutil --disable-validation``; this will
+tell you to create a one-time password, which is safe to write down. Now
+restart; right after your BIOS performed all self-tests the bootloader Shim will
+show a blue box with a message 'Press any key to perform MOK management'. Hit
+some key before the countdown exposes, which will open a menu. Choose 'Change
+Secure Boot state'. Shim's 'MokManager' will now ask you to enter three
+randomly chosen characters from the one-time password specified earlier. Once
+you provided them, confirm you really want to disable the validation.
+Afterwards, permit MokManager to reboot the machine.
+
+[:ref:`back to step-by-step guide <secureboot_bissbs>`]
+
+.. _bootworking_bisref:
+
+Boot the last kernel that was working
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Boot into the last working kernel and briefly recheck if the feature that
+  regressed really works.* [:ref:`...<bootworking_bissbs>`]
+
+This will make later steps that cover creating and trimming the configuration do
+the right thing.
+
+[:ref:`back to step-by-step guide <bootworking_bissbs>`]
+
+.. _diskspace_bisref:
+
+Space requirements
+~~~~~~~~~~~~~~~~~~
+
+  *Ensure to have enough free space for building Linux.*
+  [:ref:`... <diskspace_bissbs>`]
+
+The numbers mentioned are rough estimates with a big extra charge to be on the
+safe side, so often you will need less.
+
+If you have space constraints, be sure to hay attention to the :ref:`step about
+debug symbols' <debugsymbols_bissbs>` and its :ref:`accompanying reference
+section' <debugsymbols_bisref>`, as disabling then will reduce the consumed disk
+space by quite a few gigabytes.
+
+[:ref:`back to step-by-step guide <diskspace_bissbs>`]
+
+.. _rangecheck_bisref:
+
+Bisection range
+~~~~~~~~~~~~~~~
+
+  *Determine the kernel versions considered 'good' and 'bad' throughout this
+  guide.* [:ref:`...<rangecheck_bissbs>`]
+
+Establishing the range of commits to be checked is mostly straightforward,
+except when a regression occurred when switching from a release of one stable
+series to a release of a later series (e.g. from 6.0.13 to 6.1.5). In that case
+Git will need some hand holding, as there is no straight line of descent.
+
+That's because with the release of 6.0 mainline carried on to 6.1 while the
+stable series 6.0.y branched to the side. It's therefore theoretically possible
+that the issue you face with 6.1.5 only worked in 6.0.13, as it was fixed by a
+commit that went into one of the 6.0.y releases, but never hit mainline or the
+6.1.y series. Thankfully that normally should not happen due to the way the
+stable/longterm maintainers maintain the code. It's thus pretty safe to assume
+6.0 as a 'good' kernel. That assumption will be tested anyway, as that kernel
+will be built and tested in the segment '2' of this guide; Git would force you
+to do this as well, if you tried bisecting between 6.0.13 and 6.1.15.
+
+[:ref:`back to step-by-step guide <rangecheck_bissbs>`]
+
+.. _buildrequires_bisref:
+
+Install build requirements
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Install all software required to build a Linux kernel.*
+  [:ref:`...<buildrequires_bissbs>`]
+
+The kernel is pretty stand-alone, but besides tools like the compiler you will
+sometimes need a few libraries to build one. How to install everything needed
+depends on your Linux distribution and the configuration of the kernel you are
+about to build.
+
+Here are a few examples what you typically need on some mainstream
+distributions:
+
+* Arch Linux and derivatives::
+
+    sudo pacman --needed -S bc binutils bison flex gcc git kmod libelf openssl \
+      pahole perl zlib ncurses qt6-base
+
+* Debian, Ubuntu, and derivatives::
+
+    sudo apt install bc binutils bison dwarves flex gcc git kmod libelf-dev \
+      libssl-dev make openssl pahole perl-base pkg-config zlib1g-dev \
+      libncurses-dev qt6-base-dev g++
+
+* Fedora and derivatives::
+
+    sudo dnf install binutils \
+      /usr/bin/{bc,bison,flex,gcc,git,openssl,make,perl,pahole,rpmbuild} \
+      /usr/include/{libelf.h,openssl/pkcs7.h,zlib.h,ncurses.h,qt6/QtGui/QAction}
+
+* openSUSE and derivatives::
+
+    sudo zypper install bc binutils bison dwarves flex gcc git \
+      kernel-install-tools libelf-devel make modutils openssl openssl-devel \
+      perl-base zlib-devel rpm-build ncurses-devel qt6-base-devel
+
+These commands install a few packages that are often, but not always needed. You
+for example might want to skip installing the development headers for ncurses,
+which you will only need in case you later might want to adjust the kernel build
+configuration using make the targets 'menuconfig' or 'nconfig'; likewise omit
+the headers of Qt6 if you do not plan to adjust the .config using 'xconfig'.
+
+You furthermore might need additional libraries and their development headers
+for tasks not covered in this guide -- for example when building utilities from
+the kernel's tools/ directory.
+
+[:ref:`back to step-by-step guide <buildrequires_bissbs>`]
+
+.. _sources_bisref:
+
+Download the sources using Git
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Retrieve the Linux mainline sources.*
+  [:ref:`...<sources_bissbs>`]
+
+The step-by-step guide outlines how to download the Linux sources using a full
+Git clone of Linus' mainline repository. There is nothing more to say about
+that -- but there are two alternatives ways to retrieve the sources that might
+work better for you:
+
+* If you have an unreliable internet connection, consider
+  :ref:`using a 'Git bundle'<sources_bundle_bisref>`.
+
+* If downloading the complete repository would take too long or requires too
+  much storage space, consider :ref:`using a 'shallow
+  clone'<sources_shallow_bisref>`.
+
+.. _sources_bundle_bisref:
+
+Downloading Linux mainline sources using a bundle
+"""""""""""""""""""""""""""""""""""""""""""""""""
+
+Use the following commands to retrieve the Linux mainline sources using a
+bundle::
+
+    wget -c \
+      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/clone.bundle
+    git clone --no-checkout clone.bundle ~/linux/
+    cd ~/linux/
+    git remote remove origin
+    git remote add mainline \
+      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+    git fetch mainline
+    git remote add -t master stable \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+In case the 'wget' command fails, just re-execute it, it will pick up where
+it left off.
+
+[:ref:`back to step-by-step guide <sources_bissbs>`]
+[:ref:`back to section intro <sources_bisref>`]
+
+.. _sources_shallow_bisref:
+
+Downloading Linux mainline sources using a shallow clone
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+First, execute the following command to retrieve the latest mainline codebase::
+
+    git clone -o mainline --no-checkout --depth 1 -b master \
+      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ~/linux/
+    cd ~/linux/
+    git remote add -t master stable \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+Now deepen your clone's history to the second predecessor of the mainline
+release of your 'good' version. In case the latter are 6.0 or 6.0.13, 5.19 would
+be the first predecessor and 5.18 the second -- hence deepen the history up to
+that version::
+
+    git fetch --shallow-exclude=v5.18 mainline
+
+Afterwards add the stable Git repository as remote and all required stable
+branches as explained in the step-by-step guide.
+
+Note, shallow clones have a few peculiar characteristics:
+
+* For bisections the history needs to be deepened a few mainline versions
+  farther than it seems necessary, as explained above already. That's because
+  Git otherwise will be unable to revert or describe most of the commits within
+  a range (say 6.1..6.2), as they are internally based on earlier kernels
+  releases (like 6.0-rc2 or 5.19-rc3).
+
+* This document in most places uses ``git fetch`` with ``--shallow-exclude=``
+  to specify the earliest version you care about (or to be precise: its git
+  tag). You alternatively can use the parameter ``--shallow-since=`` to specify
+  an absolute (say ``'2023-07-15'``) or relative (``'12 months'``) date to
+  define the depth of the history you want to download. When using them while
+  bisecting mainline, ensure to deepen the history to at least 7 months before
+  the release of the mainline release your 'good' kernel is based on.
+
+* Be warned, when deepening your clone you might encounter an error like
+  'fatal: error in object: unshallow cafecaca0c0dacafecaca0c0dacafecaca0c0da'.
+  In that case run ``git repack -d`` and try again.
+
+[:ref:`back to step-by-step guide <sources_bissbs>`]
+[:ref:`back to section intro <sources_bisref>`]
+
+.. _oldconfig_bisref:
+
+Start defining the build configuration for your kernel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Start preparing a kernel build configuration (the '.config' file).*
+  [:ref:`... <oldconfig_bissbs>`]
+
+*Note, this is the first of multiple steps in this guide that create or modify
+build artifacts. The commands used in this guide store them right in the source
+tree to keep things simple. In case you prefer storing the build artifacts
+separately, create a directory like '~/linux-builddir/' and add the parameter
+``O=~/linux-builddir/`` to all make calls used throughout this guide. You will
+have to point other commands there as well -- among them the ``./scripts/config
+[...]`` commands, which will require ``--file ~/linux-builddir/.config`` to
+locate the right build configuration.*
+
+Two things can easily go wrong when creating a .config file as advised:
+
+* The oldconfig target will use a .config file from your build directory, if
+  one is already present there (e.g. '~/linux/.config'). That's totally fine if
+  that's what you intend (see next step), but in all other cases you want to
+  delete it. This for example is important in case you followed this guide
+  further, but due to problems come back here to redo the configuration from
+  scratch.
+
+* Sometimes olddefconfig is unable to locate the .config file for your running
+  kernel and will use defaults, as briefly outlined in the guide. In that case
+  check if your distribution ships the configuration somewhere and manually put
+  it in the right place (e.g. '~/linux/.config') if it does. On distributions
+  where /proc/config.gz exists this can be achieved using this command::
+
+    zcat /proc/config.gz > .config
+
+  Once you put it there, run ``make olddefconfig`` again to adjust it to the
+  needs of the kernel about to be built.
+
+Note, the olddefconfig target will set any undefined build options to their
+default value. If you prefer to set such configuration options manually, use
+``make oldconfig`` instead. Then for each undefined configuration option you
+will be asked how to proceed; in case you are unsure what to answer, simply hit
+'enter' to apply the default value. Note though that for bisections you normally
+want to go with the defaults, as you otherwise might enable a new feature that
+causes a problem looking like regressions (for example due to security
+restrictions).
+
+Occasionally odd things happen when trying to use a config file prepared for one
+kernel (say 6.1) on an older mainline release -- especially if it is much older
+(say 5.15). That's one of the reasons why the previous step in the guide told
+you to boot the kernel where everything works. If you manually add a .config
+file you thus want to ensure it's from the working kernel and not from a one
+that shows the regression.
+
+In case you want to build kernels for another machine, locate its kernel build
+configuration; usually ``ls /boot/config-$(uname -r)`` will print its name. Copy
+that file to the build machine and store it as ~/linux/.config; afterwards run
+``make olddefconfig`` to adjust it.
+
+[:ref:`back to step-by-step guide <oldconfig_bissbs>`]
+
+.. _localmodconfig_bisref:
+
+Trim the build configuration for your kernel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Disable any kernel modules apparently superfluous for your setup.*
+  [:ref:`... <localmodconfig_bissbs>`]
+
+As explained briefly in the step-by-step guide already: with localmodconfig it
+can easily happen that your self-built kernels will lack modules for tasks you
+did not perform at least once before utilizing this make target. That happens
+when a task requires kernel modules which are only autoloaded when you execute
+it for the first time. So when you never performed that task since starting your
+kernel the modules will not have been loaded -- and from localmodonfig's point
+of view look superfluous, which thus disables them to reduce the amount of code
+to be compiled.
+
+You can try to avoid this by performing typical tasks that often will autoload
+additional kernel modules: start a VM, establish VPN connections, loop-mount a
+CD/DVD ISO, mount network shares (CIFS, NFS, ...), and connect all external
+devices (2FA keys, headsets, webcams, ...) as well as storage devices with file
+systems you otherwise do not utilize (btrfs, ext4, FAT, NTFS, XFS, ...). But it
+is hard to think of everything that might be needed -- even kernel developers
+often forget one thing or another at this point.
+
+Do not let that risk bother you, especially when compiling a kernel only for
+testing purposes: everything typically crucial will be there. And if you forget
+something important you can turn on a missing feature manually later and quickly
+run the commands again to compile and install a kernel that has everything you
+need.
+
+But if you plan to build and use self-built kernels regularly, you might want to
+reduce the risk by recording which modules your system loads over the course of
+a few weeks. You can automate this with `modprobed-db
+<https://github.com/graysky2/modprobed-db>`_. Afterwards use ``LSMOD=<path>`` to
+point localmodconfig to the list of modules modprobed-db noticed being used::
+
+  yes '' | make LSMOD='${HOME}'/.config/modprobed.db localmodconfig
+
+That parameter also allows you to build trimmed kernels for another machine in
+case you copied a suitable .config over to use as base (see previous step). Just
+run ``lsmod > lsmod_foo-machine`` on that system and copy the generated file to
+your build's host home directory. Then run these commands instead of the one the
+step-by-step guide mentions::
+
+  yes '' | make LSMOD=~/lsmod_foo-machine localmodconfig
+
+[:ref:`back to step-by-step guide <localmodconfig_bissbs>`]
+
+.. _tagging_bisref:
+
+Tag the kernels about to be build
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Ensure all the kernels you will build are clearly identifiable using a
+  special tag and a unique version identifier.* [:ref:`... <tagging_bissbs>`]
+
+This allows you to differentiate your distribution's kernels from those created
+during this process, as the file or directories for the latter will contain
+'-local' in the name; it also helps picking the right entry in the boot menu and
+not lose track of you kernels, as their version numbers will look slightly
+confusing during the bisection.
+
+[:ref:`back to step-by-step guide <tagging_bissbs>`]
+
+.. _debugsymbols_bisref:
+
+Decide to enable or disable debug symbols
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Decide how to handle debug symbols.* [:ref:`... <debugsymbols_bissbs>`]
+
+Having debug symbols available can be important when your kernel throws a
+'panic', 'Oops', 'warning', or 'BUG' later when running, as then you will be
+able to find the exact place where the problem occurred in the code. But
+collecting and embedding the needed debug information takes time and consumes
+quite a bit of space: in late 2022 the build artifacts for a typical x86 kernel
+trimmed with localmodconfig consumed around 5 Gigabyte of space with debug
+symbols, but less than 1 when they were disabled. The resulting kernel image and
+modules are bigger as well, which increases storage requirements for /boot/ and
+load times.
+
+In case you want a small kernel and are unlikely to decode a stack trace later,
+you thus might want to disable debug symbols to avoid those downsides. If it
+later turns out that you need them, just enable them as shown and rebuild the
+kernel.
+
+You on the other hand definitely want to enable them for this process, if there
+is a decent chance that you need to decode a stack trace later. The section
+'Decode failure messages' in Documentation/admin-guide/reporting-issues.rst
+explains this process in more detail.
+
+[:ref:`back to step-by-step guide <debugsymbols_bissbs>`]
+
+.. _configmods_bisref:
+
+Adjust build configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Check if you may want or need to adjust some other kernel configuration
+  options:*
+
+Depending on your needs you at this point might want or have to adjust some
+kernel configuration options.
+
+.. _configmods_distros_bisref:
+
+Distro specific adjustments
+"""""""""""""""""""""""""""
+
+  *Are you running* [:ref:`... <configmods_bissbs>`]
+
+The following sections help you to avoid build problems that are known to occur
+when following this guide on a few commodity distributions.
+
+**Debian:**
+
+* Remove a stale reference to a certificate file that would cause your build to
+  fail::
+
+   ./scripts/config --set-str SYSTEM_TRUSTED_KEYS ''
+
+  Alternatively, download the needed certificate and make that configuration
+  option point to it, as `the Debian handbook explains in more detail
+  <https://debian-handbook.info/browse/stable/sect.kernel-compilation.html>`_
+  -- or generate your own, as explained in
+  Documentation/admin-guide/module-signing.rst.
+
+[:ref:`back to step-by-step guide <configmods_bissbs>`]
+
+.. _configmods_individual_bisref:
+
+Individual adjustments
+""""""""""""""""""""""
+
+  *If you want to influence the other aspects of the configuration, do so
+  now.* [:ref:`... <configmods_bissbs>`]
+
+At this point you can use a command like ``make menuconfig`` or ``make nconfig``
+to enable or disable certain features using a text-based user interface; to use
+a graphical configuration utility, run ``make xconfig`` instead. Both of them
+require development libraries from toolkits they are rely on (ncurses
+respectively Qt5 or Qt6); an error message will tell you if something required
+is missing.
+
+[:ref:`back to step-by-step guide <configmods_bissbs>`]
+
+.. _saveconfig_bisref:
+
+Put the .config file aside
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Reprocess the .config after the latest changes and store it in a safe place.*
+  [:ref:`... <saveconfig_bissbs>`]
+
+Put the .config you prepared aside, as you want to copy it back to the build
+directory every time during this guide before you start building another
+kernel. That's because going back and forth between different versions can alter
+.config files in odd ways; those occasionally cause side effects that could
+confuse testing or in some cases render the result of your bisection
+meaningless.
+
+[:ref:`back to step-by-step guide <saveconfig_bissbs>`]
+
+.. _introlatestcheck_bisref:
+
+Try to reproduce the problem with the latest codebase
+-----------------------------------------------------
+
+  *Verify the regression is not caused by some .config change and check if it
+  still occurs with the latest codebase.* [:ref:`... <introlatestcheck_bissbs>`]
+
+For some readers it might seem unnecessary to check the latest codebase at this
+point, especially if you did that already with a kernel prepared by your
+distributor or face a regression within a stable/longterm series. But it's
+highly recommended for these reasons:
+
+* You will run into any problems caused by your setup before you actually begin
+  a bisection. That will make it a lot easier to differentiate between 'this
+  most likely is some problem in my setup' and 'this change needs to be skipped
+  during the bisection, as the kernel sources at that stage contain an unrelated
+  problem that causes building or booting to fail'.
+
+* These steps will rule out if your problem is caused by some change in the
+  build configuration between the 'working' and the 'broken' kernel. This for
+  example can happen when your distributor enabled an additional security
+  feature in the newer kernel which was disabled or not yet supported by the
+  older kernel. That security feature might get into the way of something you
+  do -- in which case your problem from the perspective of the Linux kernel
+  upstream developers is not a regression, as
+  Documentation/admin-guide/reporting-regressions.rst explains in more detail.
+  You thus would waste your time if you'd try to bisect this.
+
+* If the cause for your regression was already fixed in the latest mainline
+  codebase, you'd perform the bisection for nothing. This holds true for a
+  regression you encountered with a stable/longterm release as well, as they are
+  often caused by problems in mainline changes that were backported -- in which
+  case the problem will have to be fixed in mainline first. Maybe it already was
+  fixed there and the fix is already in the process of being backported.
+
+* For regressions within a stable/longterm series it's furthermore crucial to
+  know if the issue is specific to that series or also happens in the mainline
+  kernel, as the report needs to be sent to different people:
+
+  * Regressions specific to a stable/longterm series are the stable team's
+    responsibility; mainline Linux developers might or might not care.
+
+  * Regressions also happening in mainline are something the regular Linux
+    developers and maintainers have to handle; the stable team does not care
+    and does not need to be involved in the report, they just should be told
+    to backport the fix once it's ready.
+
+  Your report might be ignored if you send it to the wrong party -- and even
+  when you get a reply there is a decent chance that developers tell you to
+  evaluate which of the two cases it is before they take a closer look.
+
+[:ref:`back to step-by-step guide <introlatestcheck_bissbs>`]
+
+.. _checkoutmaster_bisref:
+
+Check out the latest Linux codebase
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Check out the latest Linux codebase.*
+  [:ref:`... <checkoutmaster_bissbs>`]
+
+In case you later want to recheck if an ever newer codebase might fix the
+problem, remember to run that ``git fetch --shallow-exclude [...]`` command
+again mentioned earlier to update your local Git repository.
+
+[:ref:`back to step-by-step guide <checkoutmaster_bissbs>`]
+
+.. _build_bisref:
+
+Build your kernel
+~~~~~~~~~~~~~~~~~
+
+  *Build the image and the modules of your first kernel using the config file
+  you prepared.* [:ref:`... <build_bissbs>`]
+
+A lot can go wrong at this stage, but the instructions below will help you help
+yourself. Another subsection explains how to directly package your kernel up as
+deb, rpm or tar file.
+
+Dealing with build errors
+"""""""""""""""""""""""""
+
+When a build error occurs, it might be caused by some aspect of your machine's
+setup that often can be fixed quickly; other times though the problem lies in
+the code and can only be fixed by a developer. A close examination of the
+failure messages coupled with some research on the internet will often tell you
+which of the two it is. To perform such investigation, restart the build
+process like this::
+
+  make V=1
+
+The ``V=1`` activates verbose output, which might be needed to see the actual
+error. To make it easier to spot, this command also omits the ``-j $(nproc
+--all)`` used earlier to utilize every CPU core in the system for the job -- but
+this parallelism also results in some clutter when failures occur.
+
+After a few seconds the build process should run into the error again. Now try
+to find the most crucial line describing the problem. Then search the internet
+for the most important and non-generic section of that line (say 4 to 8 words);
+avoid or remove anything that looks remotely system-specific, like your username
+or local path names like ``/home/username/linux/``. First try your regular
+internet search engine with that string, afterwards search Linux kernel mailing
+lists via `lore.kernel.org/all/ <https://lore.kernel.org/all/>`_.
+
+This most of the time will find something that will explain what is wrong; quite
+often one of the hits will provide a solution for your problem, too. If you
+do not find anything that matches your problem, try again from a different angle
+by modifying your search terms or using another line from the error messages.
+
+In the end, most issues you run into have likely been encountered and
+reported by others already. That includes issues where the cause is not your
+system, but lies in the code. If you run into one of those, you might thus find
+a solution (e.g. a patch) or workaround for your issue, too.
+
+Package your kernel up
+""""""""""""""""""""""
+
+The step-by-step guide uses the default make targets (e.g. 'bzImage' and
+'modules' on x86) to build the image and the modules of your kernel, which later
+steps of the guide then install. You instead can also directly build everything
+and directly package it up by using one of the following targets:
+
+* ``make -j $(nproc --all) bindeb-pkg`` to generate a deb package
+
+* ``make -j $(nproc --all) binrpm-pkg`` to generate a rpm package
+
+* ``make -j $(nproc --all) tarbz2-pkg`` to generate a bz2 compressed tarball
+
+This is just a selection of available make targets for this purpose, see
+``make help`` for others. You can also use these targets after running
+``make -j $(nproc --all)``, as they will pick up everything already built.
+
+If you employ the targets to generate deb or rpm packages, ignore the
+step-by-step guide's instructions on installing and removing your kernel;
+instead install and remove the packages using the package utility for the format
+(e.g. dpkg and rpm) or a package management utility build on top of them (apt,
+aptitude, dnf/yum, zypper, ...). Be aware that the packages generated using
+these two make targets are designed to work on various distributions utilizing
+those formats, they thus will sometimes behave differently than your
+distribution's kernel packages.
+
+[:ref:`back to step-by-step guide <build_bissbs>`]
+
+.. _install_bisref:
+
+Put the kernel in place
+~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Install the kernel you just built.* [:ref:`... <install_bissbs>`]
+
+What you need to do after executing the command in the step-by-step guide
+depends on the existence and the implementation of ``/sbin/installkernel``
+executable on your distribution.
+
+If installkernel is found, the kernel's build system will delegate the actual
+installation of your kernel image to this executable, which then performs some
+or all of these tasks:
+
+* On almost all Linux distributions installkernel will store your kernel's
+  image in /boot/, usually as '/boot/vmlinuz-<kernelrelease_id>'; often it will
+  put a 'System.map-<kernelrelease_id>' alongside it.
+
+* On most distributions installkernel will then generate an 'initramfs'
+  (sometimes also called 'initrd'), which usually are stored as
+  '/boot/initramfs-<kernelrelease_id>.img' or
+  '/boot/initrd-<kernelrelease_id>'. Commodity distributions rely on this file
+  for booting, hence ensure to execute the make target 'modules_install' first,
+  as your distribution's initramfs generator otherwise will be unable to find
+  the modules that go into the image.
+
+* On some distributions installkernel will then add an entry for your kernel
+  to your bootloader's configuration.
+
+You have to take care of some or all of the tasks yourself, if your
+distribution lacks a installkernel script or does only handle part of them.
+Consult the distribution's documentation for details. If in doubt, install the
+kernel manually::
+
+   sudo install -m 0600 $(make -s image_name) /boot/vmlinuz-$(make -s kernelrelease)
+   sudo install -m 0600 System.map /boot/System.map-$(make -s kernelrelease)
+
+Now generate your initramfs using the tools your distribution provides for this
+process. Afterwards add your kernel to your bootloader configuration and reboot.
+
+[:ref:`back to step-by-step guide <install_bissbs>`]
+
+.. _storagespace_bisref:
+
+Storage requirements per kernel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Check how much storage space the kernel, its modules, and other related files
+  like the initramfs consume.* [:ref:`... <storagespace_bissbs>`]
+
+The kernels built during a bisection consume quite a bit of space in /boot/ and
+/lib/modules/, especially if you enabled debug symbols. That makes it easy to
+fill up volumes during a bisection -- and due to that even kernels which used to
+work earlier might fail to boot. To prevent that you will need to know how much
+space each installed kernel typically requires.
+
+Note, most of the time the pattern '/boot/*$(make -s kernelrelease)*' used in
+the guide will match all files needed to boot your kernel -- but neither the
+path nor the naming scheme are mandatory. On some distributions you thus will
+need to look in different places.
+
+[:ref:`back to step-by-step guide <storagespace_bissbs>`]
+
+.. _tainted_bisref:
+
+Check if your newly built kernel considers itself 'tainted'
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Check if the kernel marked itself as 'tainted'.*
+  [:ref:`... <tainted_bissbs>`]
+
+Linux marks itself as tainted when something happens that potentially leads to
+follow-up errors that look totally unrelated. That is why developers might
+ignore or react scantly to reports from tainted kernels -- unless of course the
+kernel set the flag right when the reported bug occurred.
+
+That's why you want check why a kernel is tainted as explained in
+Documentation/admin-guide/tainted-kernels.rst; doing so is also in your own
+interest, as your testing might be flawed otherwise.
+
+[:ref:`back to step-by-step guide <tainted_bissbs>`]
+
+.. _recheckbroken_bisref:
+
+Check the kernel built from a recent mainline codebase
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Verify if your bug occurs with the newly built kernel.*
+  [:ref:`... <recheckbroken_bissbs>`]
+
+There are a couple of reasons why your bug or regression might not show up with
+the kernel you built from the latest codebase. These are the most frequent:
+
+* The bug was fixed meanwhile.
+
+* What you suspected to be a regression was caused by a change in the build
+  configuration the provider of your kernel carried out.
+
+* Your problem might be a race condition that does not show up with your kernel;
+  the trimmed build configuration, a different setting for debug symbols, the
+  compiler used, and various other things can cause this.
+
+* In case you encountered the regression with a stable/longterm kernel it might
+  be a problem that is specific to that series; the next step in this guide will
+  check this.
+
+[:ref:`back to step-by-step guide <recheckbroken_bissbs>`]
+
+.. _recheckstablebroken_bisref:
+
+Check the kernel built from the latest stable/longterm codebase
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Are you facing a regression within a stable/longterm release, but failed to
+  reproduce it with the kernel you just built using the latest mainline sources?
+  Then check if the latest codebase for the particular series might already fix
+  the problem.* [:ref:`... <recheckstablebroken_bissbs>`]
+
+If this kernel does not show the regression either, there most likely is no need
+for a bisection.
+
+[:ref:`back to step-by-step guide <recheckstablebroken_bissbs>`]
+
+.. _introworkingcheck_bisref:
+
+Ensure the 'good' version is really working well
+------------------------------------------------
+
+  *Check if the kernels you build work fine.*
+  [:ref:`... <introworkingcheck_bissbs>`]
+
+This section will reestablish a known working base. Skipping it might be
+appealing, but is usually a bad idea, as it does something important:
+
+It will ensure the .config file you prepared earlier actually works as expected.
+That is in your own interest, as trimming the configuration is not foolproof --
+and you might be building and testing ten or more kernels for nothing before
+starting to suspect something might be wrong with the build configuration.
+
+That alone is reason enough to spend the time on this, but not the only reason.
+
+Many readers of this guide normally run kernels that are patched, use add-on
+modules, or both. Those kernels thus are not considered 'vanilla' -- therefore
+it's possible that the thing that regressed might never have worked in vanilla
+builds of the 'good' version in the first place.
+
+There is a third reason for those that noticed a regression between
+stable/longterm kernels of different series (e.g. 6.0.13..6.1.5): it will
+ensure the kernel version you assumed to be 'good' earlier in the process (e.g.
+6.0) actually is working.
+
+[:ref:`back to step-by-step guide <introworkingcheck_bissbs>`]
+
+.. _recheckworking_bisref:
+
+Build your own version of the 'good' kernel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Build your own variant of the working kernel and check if the feature that
+  regressed works as expected with it.* [:ref:`... <recheckworking_bissbs>`]
+
+In case the feature that broke with newer kernels does not work with your first
+self-built kernel, find and resolve the cause before moving on. There are a
+multitude of reasons why this might happen. Some ideas where to look:
+
+* Check the taint status and the output of ``dmesg``, maybe something unrelated
+  went wrong.
+
+* Maybe localmodconfig did something odd and disabled the module required to
+  test the feature? Then you might want to recreate a .config file based on the
+  one from the last working kernel and skip trimming it down; manually disabling
+  some features in the .config might work as well to reduce the build time.
+
+* Maybe it's not a kernel regression and something that is caused by some fluke,
+  a broken initramfs (also known as initrd), new firmware files, or an updated
+  userland software?
+
+* Maybe it was a feature added to your distributor's kernel which vanilla Linux
+  at that point never supported?
+
+Note, if you found and fixed problems with the .config file, you want to use it
+to build another kernel from the latest codebase, as your earlier tests with
+mainline and the latest version from an affected stable/longterm series were
+most likely flawed.
+
+[:ref:`back to step-by-step guide <recheckworking_bissbs>`]
+
+Perform a bisection and validate the result
+-------------------------------------------
+
+  *With all the preparations and precaution builds taken care of, you are now
+  ready to begin the bisection.* [:ref:`... <introbisect_bissbs>`]
+
+The steps in this segment perform and validate the bisection.
+
+[:ref:`back to step-by-step guide <introbisect_bissbs>`].
+
+.. _bisectstart_bisref:
+
+Start the bisection
+~~~~~~~~~~~~~~~~~~~
+
+  *Start the bisection and tell Git about the versions earlier established as
+  'good' and 'bad'.* [:ref:`... <bisectstart_bissbs>`]
+
+This will start the bisection process; the last of the commands will make Git
+check out a commit round about half-way between the 'good' and the 'bad' changes
+for you to test.
+
+[:ref:`back to step-by-step guide <bisectstart_bissbs>`]
+
+.. _bisectbuild_bisref:
+
+Build a kernel from the bisection point
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Build, install, and boot a kernel from the code Git checked out using the
+  same commands you used earlier.* [:ref:`... <bisectbuild_bissbs>`]
+
+There are two things worth of note here:
+
+* Occasionally building the kernel will fail or it might not boot due some
+  problem in the code at the bisection point. In that case run this command::
+
+    git bisect skip
+
+  Git will then check out another commit nearby which with a bit of luck should
+  work better. Afterwards restart executing this step.
+
+* Those slightly odd looking version identifiers can happen during bisections,
+  because the Linux kernel subsystems prepare their changes for a new mainline
+  release (say 6.2) before its predecessor (e.g. 6.1) is finished. They thus
+  base them on a somewhat earlier point like 6.1-rc1 or even 6.0 -- and then
+  get merged for 6.2 without rebasing nor squashing them once 6.1 is out. This
+  leads to those slightly odd looking version identifiers coming up during
+  bisections.
+
+[:ref:`back to step-by-step guide <bisectbuild_bissbs>`]
+
+.. _bisecttest_bisref:
+
+Bisection checkpoint
+~~~~~~~~~~~~~~~~~~~~
+
+  *Check if the feature that regressed works in the kernel you just built.*
+  [:ref:`... <bisecttest_bissbs>`]
+
+Ensure what you tell Git is accurate: getting it wrong just one time will bring
+the rest of the bisection totally off course, hence all testing after that point
+will be for nothing.
+
+[:ref:`back to step-by-step guide <bisecttest_bissbs>`]
+
+.. _bisectlog_bisref:
+
+Put the bisection log away
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Store Git's bisection log and the current .config file in a safe place.*
+  [:ref:`... <bisectlog_bissbs>`]
+
+As indicated above: declaring just one kernel wrongly as 'good' or 'bad' will
+render the end result of a bisection useless. In that case you'd normally have
+to restart the bisection from scratch. The log can prevent that, as it might
+allow someone to point out where a bisection likely went sideways -- and then
+instead of testing ten or more kernels you might only have to build a few to
+resolve things.
+
+The .config file is put aside, as there is a decent chance that developers might
+ask for it after you report the regression.
+
+[:ref:`back to step-by-step guide <bisectlog_bissbs>`]
+
+.. _revert_bisref:
+
+Try reverting the culprit
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *Try reverting the culprit on top of the latest codebase to see if this fixes
+  your regression.* [:ref:`... <revert_bissbs>`]
+
+This is an optional step, but whenever possible one you should try: there is a
+decent chance that developers will ask you to perform this step when you bring
+the bisection result up. So give it a try, you are in the flow already, building
+one more kernel shouldn't be a big deal at this point.
+
+The step-by-step guide covers everything relevant already except one slightly
+rare thing: did you bisected a regression that also happened with mainline using
+a stable/longterm series, but Git failed to revert the commit in mainline? Then
+try to revert the culprit in the affected stable/longterm series -- and if that
+succeeds, test that kernel version instead.
+
+[:ref:`back to step-by-step guide <revert_bissbs>`]
+
+Cleanup steps during and after following this guide
+---------------------------------------------------
+
+  *During and after following this guide you might want or need to remove some
+  of the kernels you installed.* [:ref:`... <introclosure_bissbs>`]
+
+The steps in this section describe clean-up procedures.
+
+[:ref:`back to step-by-step guide <introclosure_bissbs>`].
+
+.. _makeroom_bisref:
+
+Cleaning up during the bisection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+  *To remove one of the kernels you installed, look up its 'kernelrelease'
+  identifier.* [:ref:`... <makeroom_bissbs>`]
+
+The kernels you install during this process are easy to remove later, as its
+parts are only stored in two places and clearly identifiable. You thus do not
+need to worry to mess up your machine when you install a kernel manually (and
+thus bypass your distribution's packaging system): all parts of your kernels are
+relatively easy to remove later.
+
+One of the two places is a directory in /lib/modules/, which holds the modules
+for each installed kernel. This directory is named after the kernel's release
+identifier; hence, to remove all modules for one of the kernels you built,
+simply remove its modules directory in /lib/modules/.
+
+The other place is /boot/, where typically two up to five files will be placed
+during installation of a kernel. All of them usually contain the release name in
+their file name, but how many files and their exact names depend somewhat on
+your distribution's installkernel executable and its initramfs generator. On
+some distributions the ``kernel-install remove...`` command mentioned in the
+step-by-step guide will delete all of these files for you while also removing
+the menu entry for the kernel from your bootloader configuration. On others you
+have to take care of these two tasks yourself. The following command should
+interactively remove the three main files of a kernel with the release name
+'6.0-rc1-local-gcafec0cacaca0'::
+
+  rm -i /boot/{System.map,vmlinuz,initr}-6.0-rc1-local-gcafec0cacaca0
+
+Afterwards check for other files in /boot/ that have
+'6.0-rc1-local-gcafec0cacaca0' in their name and consider deleting them as well.
+Now remove the boot entry for the kernel from your bootloader's configuration;
+the steps to do that vary quite a bit between Linux distributions.
+
+Note, be careful with wildcards like '*' when deleting files or directories
+for kernels manually: you might accidentally remove files of a 6.0.13 kernel
+when all you want is to remove 6.0 or 6.0.1.
+
+[:ref:`back to step-by-step guide <makeroom_bissbs>`]
+
+Cleaning up after the bisection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. _finishingtouch_bisref:
+
+  *Once you have finished the bisection, do not immediately remove anything
+  you set up, as you might need a few things again.*
+  [:ref:`... <finishingtouch_bissbs>`]
+
+When you are really short of storage space removing the kernels as described in
+the step-by-step guide might not free as much space as you would like. In that
+case consider running ``rm -rf ~/linux/*`` as well now. This will remove the
+build artifacts and the Linux sources, but will leave the Git repository
+(~/linux/.git/) behind -- a simple ``git reset --hard`` thus will bring the
+sources back.
+
+Removing the repository as well would likely be unwise at this point: there
+is a decent chance developers will ask you to build another kernel to
+perform additional tests -- like testing a debug patch or a proposed fix.
+Details on how to perform those can be found in the section :ref:`Optional
+tasks: test reverts, patches, or later versions <introoptional_bissbs>`.
+
+Additional tests are also the reason why you want to keep the
+~/kernel-config-working file around for a few weeks.
+
+[:ref:`back to step-by-step guide <finishingtouch_bissbs>`]
+
+.. _introoptional_bisref:
+
+Test reverts, patches, or later versions
+----------------------------------------
+
+  *While or after reporting a bug, you might want or potentially will be asked
+  to test reverts, patches, proposed fixes, or other versions.*
+  [:ref:`... <introoptional_bissbs>`]
+
+All the commands used in this section should be pretty straight forward, so
+there is not much to add except one thing: when setting a kernel tag as
+instructed, ensure it is not much longer than the one used in the example, as
+problems will arise if the kernelrelease identifier exceeds 63 characters.
+
+[:ref:`back to step-by-step guide <introoptional_bissbs>`].
+
+
+Additional information
+======================
+
+.. _buildhost_bis:
+
+Build kernels on a different machine
+------------------------------------
+
+To compile kernels on another system, slightly alter the step-by-step guide's
+instructions:
+
+* Start following the guide on the machine where you want to install and test
+  the kernels later.
+
+* After executing ':ref:`Boot into the working kernel and briefly use the
+  apparently broken feature <bootworking_bissbs>`', save the list of loaded
+  modules to a file using ``lsmod > ~/test-machine-lsmod``. Then locate the
+  build configuration for the running kernel (see ':ref:`Start defining the
+  build configuration for your kernel <oldconfig_bisref>`' for hints on where
+  to find it) and store it as '~/test-machine-config-working'. Transfer both
+  files to the home directory of your build host.
+
+* Continue the guide on the build host (e.g. with ':ref:`Ensure to have enough
+  free space for building [...] <diskspace_bissbs>`').
+
+* When you reach ':ref:`Start preparing a kernel build configuration[...]
+  <oldconfig_bissbs>`': before running ``make olddefconfig`` for the first time,
+  execute the following command to base your configuration on the one from the
+  test machine's 'working' kernel::
+
+    cp ~/test-machine-config-working ~/linux/.config
+
+* During the next step to ':ref:`disable any apparently superfluous kernel
+  modules <localmodconfig_bissbs>`' use the following command instead::
+
+    yes '' | make localmodconfig LSMOD=~/lsmod_foo-machine localmodconfig
+
+* Continue the guide, but ignore the instructions outlining how to compile,
+  install, and reboot into a kernel every time they come up. Instead build
+  like this::
+
+    cp ~/kernel-config-working .config
+    make olddefconfig &&
+    make -j $(nproc --all) targz-pkg
+
+  This will generate a gzipped tar file whose name is printed in the last
+  line shown; for example, a kernel with the kernelrelease identifier
+  '6.0.0-rc1-local-g928a87efa423' built for x86 machines usually will
+  be stored as '~/linux/linux-6.0.0-rc1-local-g928a87efa423-x86.tar.gz'.
+
+  Copy that file to your test machine's home directory.
+
+* Switch to the test machine to check if you have enough space to hold another
+  kernel. Then extract the file you transferred::
+
+    sudo tar -xvzf ~/linux-6.0.0-rc1-local-g928a87efa423-x86.tar.gz -C /
+
+  Afterwards :ref:`generate the initramfs and add the kernel to your boot
+  loader's configuration <install_bisref>`; on some distributions the following
+  command will take care of both these tasks::
+
+    sudo /sbin/installkernel 6.0.0-rc1-local-g928a87efa423 /boot/vmlinuz-6.0.0-rc1-local-g928a87efa423
+
+  Now reboot and ensure you started the intended kernel.
+
+This approach even works when building for another architecture: just install
+cross-compilers and add the appropriate parameters to every invocation of make
+(e.g. ``make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- [...]``).
+
+Additional reading material
+---------------------------
+
+* The `man page for 'git bisect' <https://git-scm.com/docs/git-bisect>`_ and
+  `fighting regressions with 'git bisect' <https://git-scm.com/docs/git-bisect-lk2009.html>`_
+  in the Git documentation.
+* `Working with git bisect <https://nathanchance.dev/posts/working-with-git-bisect/>`_
+  from kernel developer Nathan Chancellor.
+* `Using Git bisect to figure out when brokenness was introduced <http://webchick.net/node/99>`_.
+* `Fully automated bisecting with 'git bisect run' <https://lwn.net/Articles/317154>`_.
+
+..
+   end-of-content
+..
+   This document is maintained by Thorsten Leemhuis <linux@leemhuis.info>. If
+   you spot a typo or small mistake, feel free to let him know directly and
+   he'll fix it. You are free to do the same in a mostly informal way if you
+   want to contribute changes to the text -- but for copyright reasons please CC
+   linux-doc@vger.kernel.org and 'sign-off' your contribution as
+   Documentation/process/submitting-patches.rst explains in the section 'Sign
+   your work - the Developer's Certificate of Origin'.
+..
+   This text is available under GPL-2.0+ or CC-BY-4.0, as stated at the top
+   of the file. If you want to distribute this text under CC-BY-4.0 only,
+   please use 'The Linux kernel development community' for author attribution
+   and link this as source:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
+
+..
+   Note: Only the content of this RST file as found in the Linux kernel sources
+   is available under CC-BY-4.0, as versions of this text that were processed
+   (for example by the kernel's build system) might contain content taken from
+   files which use a more restrictive license.
diff --git linux-libre-6.8-gnu/Documentation/arch/arm64/elf_hwcaps.rst linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/elf_hwcaps.rst
index ced7b335e2e0..448c1664879b 100644
--- linux-libre-6.8-gnu/Documentation/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/elf_hwcaps.rst
@@ -317,6 +317,55 @@ HWCAP2_LRCPC3
 HWCAP2_LSE128
     Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0011.
 
+HWCAP2_FPMR
+    Functionality implied by ID_AA64PFR2_EL1.FMR == 0b0001.
+
+HWCAP2_LUT
+    Functionality implied by ID_AA64ISAR2_EL1.LUT == 0b0001.
+
+HWCAP2_FAMINMAX
+    Functionality implied by ID_AA64ISAR3_EL1.FAMINMAX == 0b0001.
+
+HWCAP2_F8CVT
+    Functionality implied by ID_AA64FPFR0_EL1.F8CVT == 0b1.
+
+HWCAP2_F8FMA
+    Functionality implied by ID_AA64FPFR0_EL1.F8FMA == 0b1.
+
+HWCAP2_F8DP4
+    Functionality implied by ID_AA64FPFR0_EL1.F8DP4 == 0b1.
+
+HWCAP2_F8DP2
+    Functionality implied by ID_AA64FPFR0_EL1.F8DP2 == 0b1.
+
+HWCAP2_F8E4M3
+    Functionality implied by ID_AA64FPFR0_EL1.F8E4M3 == 0b1.
+
+HWCAP2_F8E5M2
+    Functionality implied by ID_AA64FPFR0_EL1.F8E5M2 == 0b1.
+
+HWCAP2_SME_LUTV2
+    Functionality implied by ID_AA64SMFR0_EL1.LUTv2 == 0b1.
+
+HWCAP2_SME_F8F16
+    Functionality implied by ID_AA64SMFR0_EL1.F8F16 == 0b1.
+
+HWCAP2_SME_F8F32
+    Functionality implied by ID_AA64SMFR0_EL1.F8F32 == 0b1.
+
+HWCAP2_SME_SF8FMA
+    Functionality implied by ID_AA64SMFR0_EL1.SF8FMA == 0b1.
+
+HWCAP2_SME_SF8DP4
+    Functionality implied by ID_AA64SMFR0_EL1.SF8DP4 == 0b1.
+
+HWCAP2_SME_SF8DP2
+    Functionality implied by ID_AA64SMFR0_EL1.SF8DP2 == 0b1.
+
+HWCAP2_SME_SF8DP4
+    Functionality implied by ID_AA64SMFR0_EL1.SF8DP4 == 0b1.
+
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-6.8-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/silicon-errata.rst
index 45a7f4932fe0..d33e27c5ce61 100644
--- linux-libre-6.8-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -35,8 +35,9 @@ can be triggered by Linux).
 For software workarounds that may adversely impact systems unaffected by
 the erratum in question, a Kconfig entry is added under "Kernel
 Features" -> "ARM errata workarounds via the alternatives framework".
-These are enabled by default and patched in at runtime when an affected
-CPU is detected. For less-intrusive workarounds, a Kconfig option is not
+With the exception of workarounds for errata deemed "rare" by Arm, these
+are enabled by default and patched in at runtime when an affected CPU is
+detected. For less-intrusive workarounds, a Kconfig option is not
 available and the code is structured (preferably with a comment) in such
 a way that the erratum will not be hit.
 
diff --git linux-libre-6.8-gnu/Documentation/arch/arm64/sme.rst linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/sme.rst
index 3d0e53ecac4f..be317d457417 100644
--- linux-libre-6.8-gnu/Documentation/arch/arm64/sme.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/sme.rst
@@ -75,7 +75,7 @@ model features for SME is included in Appendix A.
 2.  Vector lengths
 ------------------
 
-SME defines a second vector length similar to the SVE vector length which is
+SME defines a second vector length similar to the SVE vector length which
 controls the size of the streaming mode SVE vectors and the ZA matrix array.
 The ZA matrix is square with each side having as many bytes as a streaming
 mode SVE vector.
@@ -238,12 +238,12 @@ prctl(PR_SME_SET_VL, unsigned long arg)
       bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
       unspecified, including both streaming and non-streaming SVE state.
       Calling PR_SME_SET_VL with vl equal to the thread's current vector
-      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
+      length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag,
       does not constitute a change to the vector length for this purpose.
 
     * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared.
       Calling PR_SME_SET_VL with vl equal to the thread's current vector
-      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
+      length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag,
       does not constitute a change to the vector length for this purpose.
 
 
@@ -379,9 +379,8 @@ The regset data starts with struct user_za_header, containing:
 /proc/sys/abi/sme_default_vector_length
 
     Writing the text representation of an integer to this file sets the system
-    default vector length to the specified value, unless the value is greater
-    than the maximum vector length supported by the system in which case the
-    default vector length is set to that maximum.
+    default vector length to the specified value rounded to a supported value
+    using the same rules as for setting vector length via PR_SME_SET_VL.
 
     The result can be determined by reopening the file and reading its
     contents.
diff --git linux-libre-6.8-gnu/Documentation/arch/arm64/sve.rst linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/sve.rst
index 0d9a426e9f85..8d8837fc39ec 100644
--- linux-libre-6.8-gnu/Documentation/arch/arm64/sve.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/arm64/sve.rst
@@ -117,11 +117,6 @@ the SVE instruction set architecture.
 * The SVE registers are not used to pass arguments to or receive results from
   any syscall.
 
-* In practice the affected registers/bits will be preserved or will be replaced
-  with zeros on return from a syscall, but userspace should not make
-  assumptions about this.  The kernel behaviour may vary on a case-by-case
-  basis.
-
 * All other SVE state of a thread, including the currently configured vector
   length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector
   length (if any), is preserved across all syscalls, subject to the specific
@@ -428,9 +423,8 @@ The regset data starts with struct user_sve_header, containing:
 /proc/sys/abi/sve_default_vector_length
 
     Writing the text representation of an integer to this file sets the system
-    default vector length to the specified value, unless the value is greater
-    than the maximum vector length supported by the system in which case the
-    default vector length is set to that maximum.
+    default vector length to the specified value rounded to a supported value
+    using the same rules as for setting vector length via PR_SVE_SET_VL.
 
     The result can be determined by reopening the file and reading its
     contents.
diff --git linux-libre-6.8-gnu/Documentation/arch/riscv/vm-layout.rst linux-libre-6.9-rc6-gnu/Documentation/arch/riscv/vm-layout.rst
index 69ff6da1dbf8..e476b4386bd9 100644
--- linux-libre-6.8-gnu/Documentation/arch/riscv/vm-layout.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/riscv/vm-layout.rst
@@ -144,14 +144,8 @@ passing 0 into the hint address parameter of mmap. On CPUs with an address space
 smaller than sv48, the CPU maximum supported address space will be the default.
 
 Software can "opt-in" to receiving VAs from another VA space by providing
-a hint address to mmap. A hint address passed to mmap will cause the largest
-address space that fits entirely into the hint to be used, unless there is no
-space left in the address space. If there is no space available in the requested
-address space, an address in the next smallest available address space will be
-returned.
-
-For example, in order to obtain 48-bit VA space, a hint address greater than
-:code:`1 << 47` must be provided. Note that this is 47 due to sv48 userspace
-ending at :code:`1 << 47` and the addresses beyond this are reserved for the
-kernel. Similarly, to obtain 57-bit VA space addresses, a hint address greater
-than or equal to :code:`1 << 56` must be provided.
+a hint address to mmap. When a hint address is passed to mmap, the returned
+address will never use more bits than the hint address. For example, if a hint
+address of `1 << 40` is passed to mmap, a valid returned address will never use
+bits 41 through 63. If no mappable addresses are available in that range, mmap
+will return `MAP_FAILED`.
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/amd-memory-encryption.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/amd-memory-encryption.rst
index 07caa8fff852..414bc7402ae7 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/amd-memory-encryption.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/amd-memory-encryption.rst
@@ -87,14 +87,14 @@ The state of SME in the Linux kernel can be documented as follows:
 	  kernel is non-zero).
 
 SME can also be enabled and activated in the BIOS. If SME is enabled and
-activated in the BIOS, then all memory accesses will be encrypted and it will
-not be necessary to activate the Linux memory encryption support.  If the BIOS
-merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
-memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
-by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
-not enable SME, then Linux will not be able to activate memory encryption, even
-if configured to do so by default or the mem_encrypt=on command line parameter
-is specified.
+activated in the BIOS, then all memory accesses will be encrypted and it
+will not be necessary to activate the Linux memory encryption support.
+
+If the BIOS merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG),
+then memory encryption can be enabled by supplying mem_encrypt=on on the
+kernel command line.  However, if BIOS does not enable SME, then Linux
+will not be able to activate memory encryption, even if configured to do
+so by default or the mem_encrypt=on command line parameter is specified.
 
 Secure Nested Paging (SNP)
 ==========================
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/amd_hsmp.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/amd_hsmp.rst
index c92bfd55359f..1e499ecf5f4e 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/amd_hsmp.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/amd_hsmp.rst
@@ -13,7 +13,8 @@ set of mailbox registers.
 
 More details on the interface can be found in chapter
 "7 Host System Management Port (HSMP)" of the family/model PPR
-Eg: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
+Eg: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip
+
 
 HSMP interface is supported on EPYC server CPU models only.
 
@@ -97,8 +98,8 @@ what happened. The transaction returns 0 on success.
 
 More details on the interface and message definitions can be found in chapter
 "7 Host System Management Port (HSMP)" of the respective family/model PPR
-eg: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
+eg: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip
 
 User space C-APIs are made available by linking against the esmi library,
-which is provided by the E-SMS project https://developer.amd.com/e-sms/.
+which is provided by the E-SMS project https://www.amd.com/en/developer/e-sms.html.
 See: https://github.com/amd/esmi_ib_library
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/boot.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/boot.rst
index c513855a54bb..4fd492cb4970 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/boot.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/boot.rst
@@ -878,7 +878,8 @@ Protocol:	2.10+
   address if possible.
 
   A non-relocatable kernel will unconditionally move itself and to run
-  at this address.
+  at this address. A relocatable kernel will move itself to this address if it
+  loaded below this address.
 
 ============	=======
 Field name:	init_size
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/pti.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/pti.rst
index e08d35177bc0..57e8392f61d3 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/pti.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/pti.rst
@@ -26,9 +26,9 @@ comments in pti.c).
 
 This approach helps to ensure that side-channel attacks leveraging
 the paging structures do not function when PTI is enabled.  It can be
-enabled by setting CONFIG_PAGE_TABLE_ISOLATION=y at compile time.
-Once enabled at compile-time, it can be disabled at boot with the
-'nopti' or 'pti=' kernel parameters (see kernel-parameters.txt).
+enabled by setting CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y at compile
+time.  Once enabled at compile-time, it can be disabled at boot with
+the 'nopti' or 'pti=' kernel parameters (see kernel-parameters.txt).
 
 Page Table Management
 =====================
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/resctrl.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/resctrl.rst
index a6279df64a9d..6c245582d8fb 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/resctrl.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/resctrl.rst
@@ -45,7 +45,7 @@ mount options are:
 	Enable code/data prioritization in L2 cache allocations.
 "mba_MBps":
 	Enable the MBA Software Controller(mba_sc) to specify MBA
-	bandwidth in MBps
+	bandwidth in MiBps
 "debug":
 	Make debug files accessible. Available debug files are annotated with
 	"Available only with debug option".
@@ -526,7 +526,7 @@ threads start using more cores in an rdtgroup, the actual bandwidth may
 increase or vary although user specified bandwidth percentage is same.
 
 In order to mitigate this and make the interface more user friendly,
-resctrl added support for specifying the bandwidth in MBps as well.  The
+resctrl added support for specifying the bandwidth in MiBps as well.  The
 kernel underneath would use a software feedback mechanism or a "Software
 Controller(mba_sc)" which reads the actual bandwidth using MBM counters
 and adjust the memory bandwidth percentages to ensure::
@@ -573,13 +573,13 @@ Memory b/w domain is L3 cache.
 
 	MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
 
-Memory bandwidth Allocation specified in MBps
----------------------------------------------
+Memory bandwidth Allocation specified in MiBps
+----------------------------------------------
 
 Memory bandwidth domain is L3 cache.
 ::
 
-	MB:<cache_id0>=bw_MBps0;<cache_id1>=bw_MBps1;...
+	MB:<cache_id0>=bw_MiBps0;<cache_id1>=bw_MiBps1;...
 
 Slow Memory Bandwidth Allocation (SMBA)
 ---------------------------------------
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/topology.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/topology.rst
index 08ebf9edbfc1..7352ab89a55a 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/topology.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/topology.rst
@@ -47,17 +47,21 @@ AMD nomenclature for package is 'Node'.
 
 Package-related topology information in the kernel:
 
-  - cpuinfo_x86.x86_max_cores:
+  - topology_num_threads_per_package()
 
-    The number of cores in a package. This information is retrieved via CPUID.
+    The number of threads in a package.
 
-  - cpuinfo_x86.x86_max_dies:
+  - topology_num_cores_per_package()
 
-    The number of dies in a package. This information is retrieved via CPUID.
+    The number of cores in a package.
+
+  - topology_max_dies_per_package()
+
+    The maximum number of dies in a package.
 
   - cpuinfo_x86.topo.die_id:
 
-    The physical ID of the die. This information is retrieved via CPUID.
+    The physical ID of the die.
 
   - cpuinfo_x86.topo.pkg_id:
 
@@ -96,16 +100,6 @@ are SMT- or CMT-type threads.
 AMDs nomenclature for a CMT core is "Compute Unit". The kernel always uses
 "core".
 
-Core-related topology information in the kernel:
-
-  - smp_num_siblings:
-
-    The number of threads in a core. The number of threads in a package can be
-    calculated by::
-
-	threads_per_package = cpuinfo_x86.x86_max_cores * smp_num_siblings
-
-
 Threads
 =======
 A thread is a single scheduling unit. It's the equivalent to a logical Linux
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/x86_64/fred.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/x86_64/fred.rst
new file mode 100644
index 000000000000..9f57e7b91f7e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/x86_64/fred.rst
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Flexible Return and Event Delivery (FRED)
+=========================================
+
+Overview
+========
+
+The FRED architecture defines simple new transitions that change
+privilege level (ring transitions). The FRED architecture was
+designed with the following goals:
+
+1) Improve overall performance and response time by replacing event
+   delivery through the interrupt descriptor table (IDT event
+   delivery) and event return by the IRET instruction with lower
+   latency transitions.
+
+2) Improve software robustness by ensuring that event delivery
+   establishes the full supervisor context and that event return
+   establishes the full user context.
+
+The new transitions defined by the FRED architecture are FRED event
+delivery and, for returning from events, two FRED return instructions.
+FRED event delivery can effect a transition from ring 3 to ring 0, but
+it is used also to deliver events incident to ring 0. One FRED
+instruction (ERETU) effects a return from ring 0 to ring 3, while the
+other (ERETS) returns while remaining in ring 0. Collectively, FRED
+event delivery and the FRED return instructions are FRED transitions.
+
+In addition to these transitions, the FRED architecture defines a new
+instruction (LKGS) for managing the state of the GS segment register.
+The LKGS instruction can be used by 64-bit operating systems that do
+not use the new FRED transitions.
+
+Furthermore, the FRED architecture is easy to extend for future CPU
+architectures.
+
+Software based event dispatching
+================================
+
+FRED operates differently from IDT in terms of event handling. Instead
+of directly dispatching an event to its handler based on the event
+vector, FRED requires the software to dispatch an event to its handler
+based on both the event's type and vector. Therefore, an event dispatch
+framework must be implemented to facilitate the event-to-handler
+dispatch process. The FRED event dispatch framework takes control
+once an event is delivered, and employs a two-level dispatch.
+
+The first level dispatching is event type based, and the second level
+dispatching is event vector based.
+
+Full supervisor/user context
+============================
+
+FRED event delivery atomically save and restore full supervisor/user
+context upon event delivery and return. Thus it avoids the problem of
+transient states due to %cr2 and/or %dr6, and it is no longer needed
+to handle all the ugly corner cases caused by half baked entry states.
+
+FRED allows explicit unblock of NMI with new event return instructions
+ERETS/ERETU, avoiding the mess caused by IRET which unconditionally
+unblocks NMI, e.g., when an exception happens during NMI handling.
+
+FRED always restores the full value of %rsp, thus ESPFIX is no longer
+needed when FRED is enabled.
+
+LKGS
+====
+
+LKGS behaves like the MOV to GS instruction except that it loads the
+base address into the IA32_KERNEL_GS_BASE MSR instead of the GS
+segment’s descriptor cache. With LKGS, it ends up with avoiding
+mucking with kernel GS, i.e., an operating system can always operate
+with its own GS base address.
+
+Because FRED event delivery from ring 3 and ERETU both swap the value
+of the GS base address and that of the IA32_KERNEL_GS_BASE MSR, plus
+the introduction of LKGS instruction, the SWAPGS instruction is no
+longer needed when FRED is enabled, thus is disallowed (#UD).
+
+Stack levels
+============
+
+4 stack levels 0~3 are introduced to replace the nonreentrant IST for
+event handling, and each stack level should be configured to use a
+dedicated stack.
+
+The current stack level could be unchanged or go higher upon FRED
+event delivery. If unchanged, the CPU keeps using the current event
+stack. If higher, the CPU switches to a new event stack specified by
+the MSR of the new stack level, i.e., MSR_IA32_FRED_RSP[123].
+
+Only execution of a FRED return instruction ERET[US], could lower the
+current stack level, causing the CPU to switch back to the stack it was
+on before a previous event delivery that promoted the stack level.
diff --git linux-libre-6.8-gnu/Documentation/arch/x86/x86_64/index.rst linux-libre-6.9-rc6-gnu/Documentation/arch/x86/x86_64/index.rst
index a56070fc8e77..ad15e9bd623f 100644
--- linux-libre-6.8-gnu/Documentation/arch/x86/x86_64/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/arch/x86/x86_64/index.rst
@@ -15,3 +15,4 @@ x86_64 Support
    cpu-hotplug-spec
    machinecheck
    fsgs
+   fred
diff --git linux-libre-6.8-gnu/Documentation/bpf/kfuncs.rst linux-libre-6.9-rc6-gnu/Documentation/bpf/kfuncs.rst
index 7985c6615f3c..a8f5782bd833 100644
--- linux-libre-6.8-gnu/Documentation/bpf/kfuncs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/bpf/kfuncs.rst
@@ -177,10 +177,10 @@ In addition to kfuncs' arguments, verifier may need more information about the
 type of kfunc(s) being registered with the BPF subsystem. To do so, we define
 flags on a set of kfuncs as follows::
 
-        BTF_SET8_START(bpf_task_set)
+        BTF_KFUNCS_START(bpf_task_set)
         BTF_ID_FLAGS(func, bpf_get_task_pid, KF_ACQUIRE | KF_RET_NULL)
         BTF_ID_FLAGS(func, bpf_put_pid, KF_RELEASE)
-        BTF_SET8_END(bpf_task_set)
+        BTF_KFUNCS_END(bpf_task_set)
 
 This set encodes the BTF ID of each kfunc listed above, and encodes the flags
 along with it. Ofcourse, it is also allowed to specify no flags.
@@ -347,10 +347,10 @@ Once the kfunc is prepared for use, the final step to making it visible is
 registering it with the BPF subsystem. Registration is done per BPF program
 type. An example is shown below::
 
-        BTF_SET8_START(bpf_task_set)
+        BTF_KFUNCS_START(bpf_task_set)
         BTF_ID_FLAGS(func, bpf_get_task_pid, KF_ACQUIRE | KF_RET_NULL)
         BTF_ID_FLAGS(func, bpf_put_pid, KF_RELEASE)
-        BTF_SET8_END(bpf_task_set)
+        BTF_KFUNCS_END(bpf_task_set)
 
         static const struct btf_kfunc_id_set bpf_task_kfunc_set = {
                 .owner = THIS_MODULE,
diff --git linux-libre-6.8-gnu/Documentation/bpf/map_lpm_trie.rst linux-libre-6.9-rc6-gnu/Documentation/bpf/map_lpm_trie.rst
index 74d64a30f500..f9cd579496c9 100644
--- linux-libre-6.8-gnu/Documentation/bpf/map_lpm_trie.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/bpf/map_lpm_trie.rst
@@ -17,7 +17,7 @@ significant byte.
 
 LPM tries may be created with a maximum prefix length that is a multiple
 of 8, in the range from 8 to 2048. The key used for lookup and update
-operations is a ``struct bpf_lpm_trie_key``, extended by
+operations is a ``struct bpf_lpm_trie_key_u8``, extended by
 ``max_prefixlen/8`` bytes.
 
 - For IPv4 addresses the data length is 4 bytes
diff --git linux-libre-6.8-gnu/Documentation/bpf/standardization/instruction-set.rst linux-libre-6.9-rc6-gnu/Documentation/bpf/standardization/instruction-set.rst
index 245b6defc298..a5ab00ac0b14 100644
--- linux-libre-6.8-gnu/Documentation/bpf/standardization/instruction-set.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/bpf/standardization/instruction-set.rst
@@ -1,11 +1,11 @@
 .. contents::
 .. sectnum::
 
-=======================================
-BPF Instruction Set Specification, v1.0
-=======================================
+======================================
+BPF Instruction Set Architecture (ISA)
+======================================
 
-This document specifies version 1.0 of the BPF instruction set.
+This document specifies the BPF instruction set architecture (ISA).
 
 Documentation conventions
 =========================
@@ -24,22 +24,22 @@ a type's signedness (`S`) and bit width (`N`), respectively.
 .. table:: Meaning of signedness notation.
 
   ==== =========
-  `S`  Meaning
+  S    Meaning
   ==== =========
-  `u`  unsigned
-  `s`  signed
+  u    unsigned
+  s    signed
   ==== =========
 
 .. table:: Meaning of bit-width notation.
 
   ===== =========
-  `N`   Bit width
+  N     Bit width
   ===== =========
-  `8`   8 bits
-  `16`  16 bits
-  `32`  32 bits
-  `64`  64 bits
-  `128` 128 bits
+  8     8 bits
+  16    16 bits
+  32    32 bits
+  64    64 bits
+  128   128 bits
   ===== =========
 
 For example, `u32` is a type whose valid values are all the 32-bit unsigned
@@ -48,31 +48,31 @@ numbers.
 
 Functions
 ---------
-* `htobe16`: Takes an unsigned 16-bit number in host-endian format and
+* htobe16: Takes an unsigned 16-bit number in host-endian format and
   returns the equivalent number as an unsigned 16-bit number in big-endian
   format.
-* `htobe32`: Takes an unsigned 32-bit number in host-endian format and
+* htobe32: Takes an unsigned 32-bit number in host-endian format and
   returns the equivalent number as an unsigned 32-bit number in big-endian
   format.
-* `htobe64`: Takes an unsigned 64-bit number in host-endian format and
+* htobe64: Takes an unsigned 64-bit number in host-endian format and
   returns the equivalent number as an unsigned 64-bit number in big-endian
   format.
-* `htole16`: Takes an unsigned 16-bit number in host-endian format and
+* htole16: Takes an unsigned 16-bit number in host-endian format and
   returns the equivalent number as an unsigned 16-bit number in little-endian
   format.
-* `htole32`: Takes an unsigned 32-bit number in host-endian format and
+* htole32: Takes an unsigned 32-bit number in host-endian format and
   returns the equivalent number as an unsigned 32-bit number in little-endian
   format.
-* `htole64`: Takes an unsigned 64-bit number in host-endian format and
+* htole64: Takes an unsigned 64-bit number in host-endian format and
   returns the equivalent number as an unsigned 64-bit number in little-endian
   format.
-* `bswap16`: Takes an unsigned 16-bit number in either big- or little-endian
+* bswap16: Takes an unsigned 16-bit number in either big- or little-endian
   format and returns the equivalent number with the same bit width but
   opposite endianness.
-* `bswap32`: Takes an unsigned 32-bit number in either big- or little-endian
+* bswap32: Takes an unsigned 32-bit number in either big- or little-endian
   format and returns the equivalent number with the same bit width but
   opposite endianness.
-* `bswap64`: Takes an unsigned 64-bit number in either big- or little-endian
+* bswap64: Takes an unsigned 64-bit number in either big- or little-endian
   format and returns the equivalent number with the same bit width but
   opposite endianness.
 
@@ -97,40 +97,101 @@ Definitions
     A:          10000110
     B: 11111111 10000110
 
+Conformance groups
+------------------
+
+An implementation does not need to support all instructions specified in this
+document (e.g., deprecated instructions).  Instead, a number of conformance
+groups are specified.  An implementation must support the base32 conformance
+group and may support additional conformance groups, where supporting a
+conformance group means it must support all instructions in that conformance
+group.
+
+The use of named conformance groups enables interoperability between a runtime
+that executes instructions, and tools as such compilers that generate
+instructions for the runtime.  Thus, capability discovery in terms of
+conformance groups might be done manually by users or automatically by tools.
+
+Each conformance group has a short ASCII label (e.g., "base32") that
+corresponds to a set of instructions that are mandatory.  That is, each
+instruction has one or more conformance groups of which it is a member.
+
+This document defines the following conformance groups:
+
+* base32: includes all instructions defined in this
+  specification unless otherwise noted.
+* base64: includes base32, plus instructions explicitly noted
+  as being in the base64 conformance group.
+* atomic32: includes 32-bit atomic operation instructions (see `Atomic operations`_).
+* atomic64: includes atomic32, plus 64-bit atomic operation instructions.
+* divmul32: includes 32-bit division, multiplication, and modulo instructions.
+* divmul64: includes divmul32, plus 64-bit division, multiplication,
+  and modulo instructions.
+* packet: deprecated packet access instructions.
+
 Instruction encoding
 ====================
 
 BPF has two instruction encodings:
 
 * the basic instruction encoding, which uses 64 bits to encode an instruction
-* the wide instruction encoding, which appends a second 64-bit immediate (i.e.,
-  constant) value after the basic instruction for a total of 128 bits.
+* the wide instruction encoding, which appends a second 64 bits
+  after the basic instruction for a total of 128 bits.
 
-The fields conforming an encoded basic instruction are stored in the
-following order::
+Basic instruction encoding
+--------------------------
 
-  opcode:8 src_reg:4 dst_reg:4 offset:16 imm:32 // In little-endian BPF.
-  opcode:8 dst_reg:4 src_reg:4 offset:16 imm:32 // In big-endian BPF.
+A basic instruction is encoded as follows::
 
-**imm**
-  signed integer immediate value
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  |    opcode     |     regs      |            offset             |
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  |                              imm                              |
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 
-**offset**
-  signed integer offset used with pointer arithmetic
+**opcode**
+  operation to perform, encoded as follows::
 
-**src_reg**
-  the source register number (0-10), except where otherwise specified
-  (`64-bit immediate instructions`_ reuse this field for other purposes)
+    +-+-+-+-+-+-+-+-+
+    |specific |class|
+    +-+-+-+-+-+-+-+-+
 
-**dst_reg**
-  destination register number (0-10)
+  **specific**
+    The format of these bits varies by instruction class
 
-**opcode**
-  operation to perform
+  **class**
+    The instruction class (see `Instruction classes`_)
+
+**regs**
+  The source and destination register numbers, encoded as follows
+  on a little-endian host::
+
+    +-+-+-+-+-+-+-+-+
+    |src_reg|dst_reg|
+    +-+-+-+-+-+-+-+-+
+
+  and as follows on a big-endian host::
+
+    +-+-+-+-+-+-+-+-+
+    |dst_reg|src_reg|
+    +-+-+-+-+-+-+-+-+
+
+  **src_reg**
+    the source register number (0-10), except where otherwise specified
+    (`64-bit immediate instructions`_ reuse this field for other purposes)
+
+  **dst_reg**
+    destination register number (0-10)
+
+**offset**
+  signed integer offset used with pointer arithmetic
+
+**imm**
+  signed integer immediate value
 
-Note that the contents of multi-byte fields ('imm' and 'offset') are
-stored using big-endian byte ordering in big-endian BPF and
-little-endian byte ordering in little-endian BPF.
+Note that the contents of multi-byte fields ('offset' and 'imm') are
+stored using big-endian byte ordering on big-endian hosts and
+little-endian byte ordering on little-endian hosts.
 
 For example::
 
@@ -143,71 +204,83 @@ For example::
 Note that most instructions do not use all of the fields.
 Unused fields shall be cleared to zero.
 
-As discussed below in `64-bit immediate instructions`_, a 64-bit immediate
-instruction uses a 64-bit immediate value that is constructed as follows.
-The 64 bits following the basic instruction contain a pseudo instruction
-using the same format but with opcode, dst_reg, src_reg, and offset all set to zero,
-and imm containing the high 32 bits of the immediate value.
+Wide instruction encoding
+--------------------------
+
+Some instructions are defined to use the wide instruction encoding,
+which uses two 32-bit immediate values.  The 64 bits following
+the basic instruction format contain a pseudo instruction
+with 'opcode', 'dst_reg', 'src_reg', and 'offset' all set to zero.
 
 This is depicted in the following figure::
 
-        basic_instruction
-  .-----------------------------.
-  |                             |
-  code:8 regs:8 offset:16 imm:32 unused:32 imm:32
-                                 |              |
-                                 '--------------'
-                                pseudo instruction
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  |    opcode     |     regs      |            offset             |
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  |                              imm                              |
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  |                           reserved                            |
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  |                           next_imm                            |
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+**opcode**
+  operation to perform, encoded as explained above
 
-Thus the 64-bit immediate value is constructed as follows:
+**regs**
+  The source and destination register numbers, encoded as explained above
+
+**offset**
+  signed integer offset used with pointer arithmetic
+
+**imm**
+  signed integer immediate value
 
-  imm64 = (next_imm << 32) | imm
+**reserved**
+  unused, set to zero
 
-where 'next_imm' refers to the imm value of the pseudo instruction
-following the basic instruction.  The unused bytes in the pseudo
-instruction are reserved and shall be cleared to zero.
+**next_imm**
+  second signed integer immediate value
 
 Instruction classes
 -------------------
 
-The three LSB bits of the 'opcode' field store the instruction class:
-
-=========  =====  ===============================  ===================================
-class      value  description                      reference
-=========  =====  ===============================  ===================================
-BPF_LD     0x00   non-standard load operations     `Load and store instructions`_
-BPF_LDX    0x01   load into register operations    `Load and store instructions`_
-BPF_ST     0x02   store from immediate operations  `Load and store instructions`_
-BPF_STX    0x03   store from register operations   `Load and store instructions`_
-BPF_ALU    0x04   32-bit arithmetic operations     `Arithmetic and jump instructions`_
-BPF_JMP    0x05   64-bit jump operations           `Arithmetic and jump instructions`_
-BPF_JMP32  0x06   32-bit jump operations           `Arithmetic and jump instructions`_
-BPF_ALU64  0x07   64-bit arithmetic operations     `Arithmetic and jump instructions`_
-=========  =====  ===============================  ===================================
+The three least significant bits of the 'opcode' field store the instruction class:
+
+=====  =====  ===============================  ===================================
+class  value  description                      reference
+=====  =====  ===============================  ===================================
+LD     0x0    non-standard load operations     `Load and store instructions`_
+LDX    0x1    load into register operations    `Load and store instructions`_
+ST     0x2    store from immediate operations  `Load and store instructions`_
+STX    0x3    store from register operations   `Load and store instructions`_
+ALU    0x4    32-bit arithmetic operations     `Arithmetic and jump instructions`_
+JMP    0x5    64-bit jump operations           `Arithmetic and jump instructions`_
+JMP32  0x6    32-bit jump operations           `Arithmetic and jump instructions`_
+ALU64  0x7    64-bit arithmetic operations     `Arithmetic and jump instructions`_
+=====  =====  ===============================  ===================================
 
 Arithmetic and jump instructions
 ================================
 
-For arithmetic and jump instructions (``BPF_ALU``, ``BPF_ALU64``, ``BPF_JMP`` and
-``BPF_JMP32``), the 8-bit 'opcode' field is divided into three parts:
+For arithmetic and jump instructions (``ALU``, ``ALU64``, ``JMP`` and
+``JMP32``), the 8-bit 'opcode' field is divided into three parts::
 
-==============  ======  =================
-4 bits (MSB)    1 bit   3 bits (LSB)
-==============  ======  =================
-code            source  instruction class
-==============  ======  =================
+  +-+-+-+-+-+-+-+-+
+  |  code |s|class|
+  +-+-+-+-+-+-+-+-+
 
 **code**
   the operation code, whose meaning varies by instruction class
 
-**source**
+**s (source)**
   the source operand location, which unless otherwise specified is one of:
 
   ======  =====  ==============================================
   source  value  description
   ======  =====  ==============================================
-  BPF_K   0x00   use 32-bit 'imm' value as source operand
-  BPF_X   0x08   use 'src_reg' register value as source operand
+  K       0      use 32-bit 'imm' value as source operand
+  X       1      use 'src_reg' register value as source operand
   ======  =====  ==============================================
 
 **instruction class**
@@ -216,70 +289,75 @@ code            source  instruction class
 Arithmetic instructions
 -----------------------
 
-``BPF_ALU`` uses 32-bit wide operands while ``BPF_ALU64`` uses 64-bit wide operands for
-otherwise identical operations.
+``ALU`` uses 32-bit wide operands while ``ALU64`` uses 64-bit wide operands for
+otherwise identical operations. ``ALU64`` instructions belong to the
+base64 conformance group unless noted otherwise.
 The 'code' field encodes the operation as below, where 'src' and 'dst' refer
 to the values of the source and destination registers, respectively.
 
-=========  =====  =======  ==========================================================
-code       value  offset   description
-=========  =====  =======  ==========================================================
-BPF_ADD    0x00   0        dst += src
-BPF_SUB    0x10   0        dst -= src
-BPF_MUL    0x20   0        dst \*= src
-BPF_DIV    0x30   0        dst = (src != 0) ? (dst / src) : 0
-BPF_SDIV   0x30   1        dst = (src != 0) ? (dst s/ src) : 0
-BPF_OR     0x40   0        dst \|= src
-BPF_AND    0x50   0        dst &= src
-BPF_LSH    0x60   0        dst <<= (src & mask)
-BPF_RSH    0x70   0        dst >>= (src & mask)
-BPF_NEG    0x80   0        dst = -dst
-BPF_MOD    0x90   0        dst = (src != 0) ? (dst % src) : dst
-BPF_SMOD   0x90   1        dst = (src != 0) ? (dst s% src) : dst
-BPF_XOR    0xa0   0        dst ^= src
-BPF_MOV    0xb0   0        dst = src
-BPF_MOVSX  0xb0   8/16/32  dst = (s8,s16,s32)src
-BPF_ARSH   0xc0   0        :term:`sign extending<Sign Extend>` dst >>= (src & mask)
-BPF_END    0xd0   0        byte swap operations (see `Byte swap instructions`_ below)
-=========  =====  =======  ==========================================================
+=====  =====  =======  ==========================================================
+name   code   offset   description
+=====  =====  =======  ==========================================================
+ADD    0x0    0        dst += src
+SUB    0x1    0        dst -= src
+MUL    0x2    0        dst \*= src
+DIV    0x3    0        dst = (src != 0) ? (dst / src) : 0
+SDIV   0x3    1        dst = (src != 0) ? (dst s/ src) : 0
+OR     0x4    0        dst \|= src
+AND    0x5    0        dst &= src
+LSH    0x6    0        dst <<= (src & mask)
+RSH    0x7    0        dst >>= (src & mask)
+NEG    0x8    0        dst = -dst
+MOD    0x9    0        dst = (src != 0) ? (dst % src) : dst
+SMOD   0x9    1        dst = (src != 0) ? (dst s% src) : dst
+XOR    0xa    0        dst ^= src
+MOV    0xb    0        dst = src
+MOVSX  0xb    8/16/32  dst = (s8,s16,s32)src
+ARSH   0xc    0        :term:`sign extending<Sign Extend>` dst >>= (src & mask)
+END    0xd    0        byte swap operations (see `Byte swap instructions`_ below)
+=====  =====  =======  ==========================================================
 
 Underflow and overflow are allowed during arithmetic operations, meaning
 the 64-bit or 32-bit value will wrap. If BPF program execution would
 result in division by zero, the destination register is instead set to zero.
-If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
-the destination register is unchanged whereas for ``BPF_ALU`` the upper
+If execution would result in modulo by zero, for ``ALU64`` the value of
+the destination register is unchanged whereas for ``ALU`` the upper
 32 bits of the destination register are zeroed.
 
-``BPF_ADD | BPF_X | BPF_ALU`` means::
+``{ADD, X, ALU}``, where 'code' = ``ADD``, 'source' = ``X``, and 'class' = ``ALU``, means::
 
   dst = (u32) ((u32) dst + (u32) src)
 
 where '(u32)' indicates that the upper 32 bits are zeroed.
 
-``BPF_ADD | BPF_X | BPF_ALU64`` means::
+``{ADD, X, ALU64}`` means::
 
   dst = dst + src
 
-``BPF_XOR | BPF_K | BPF_ALU`` means::
+``{XOR, K, ALU}`` means::
 
-  dst = (u32) dst ^ (u32) imm32
+  dst = (u32) dst ^ (u32) imm
 
-``BPF_XOR | BPF_K | BPF_ALU64`` means::
+``{XOR, K, ALU64}`` means::
 
-  dst = dst ^ imm32
+  dst = dst ^ imm
 
 Note that most instructions have instruction offset of 0. Only three instructions
-(``BPF_SDIV``, ``BPF_SMOD``, ``BPF_MOVSX``) have a non-zero offset.
+(``SDIV``, ``SMOD``, ``MOVSX``) have a non-zero offset.
 
+Division, multiplication, and modulo operations for ``ALU`` are part
+of the "divmul32" conformance group, and division, multiplication, and
+modulo operations for ``ALU64`` are part of the "divmul64" conformance
+group.
 The division and modulo operations support both unsigned and signed flavors.
 
-For unsigned operations (``BPF_DIV`` and ``BPF_MOD``), for ``BPF_ALU``,
-'imm' is interpreted as a 32-bit unsigned value. For ``BPF_ALU64``,
+For unsigned operations (``DIV`` and ``MOD``), for ``ALU``,
+'imm' is interpreted as a 32-bit unsigned value. For ``ALU64``,
 'imm' is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then
 interpreted as a 64-bit unsigned value.
 
-For signed operations (``BPF_SDIV`` and ``BPF_SMOD``), for ``BPF_ALU``,
-'imm' is interpreted as a 32-bit signed value. For ``BPF_ALU64``, 'imm'
+For signed operations (``SDIV`` and ``SMOD``), for ``ALU``,
+'imm' is interpreted as a 32-bit signed value. For ``ALU64``, 'imm'
 is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then
 interpreted as a 64-bit signed value.
 
@@ -291,11 +369,15 @@ etc. This specification requires that signed modulo use truncated division
 
    a % n = a - n * trunc(a / n)
 
-The ``BPF_MOVSX`` instruction does a move operation with sign extension.
-``BPF_ALU | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit and 16-bit operands into 32
+The ``MOVSX`` instruction does a move operation with sign extension.
+``{MOVSX, X, ALU}`` :term:`sign extends<Sign Extend>` 8-bit and 16-bit operands into 32
 bit operands, and zeroes the remaining upper 32 bits.
-``BPF_ALU64 | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit, 16-bit, and 32-bit
-operands into 64 bit operands.
+``{MOVSX, X, ALU64}`` :term:`sign extends<Sign Extend>` 8-bit, 16-bit, and 32-bit
+operands into 64 bit operands.  Unlike other arithmetic instructions,
+``MOVSX`` is only defined for register source operands (``X``).
+
+The ``NEG`` instruction is only defined when the source bit is clear
+(``K``).
 
 Shift operations use a mask of 0x3F (63) for 64-bit operations and 0x1F (31)
 for 32-bit operations.
@@ -303,43 +385,45 @@ for 32-bit operations.
 Byte swap instructions
 ----------------------
 
-The byte swap instructions use instruction classes of ``BPF_ALU`` and ``BPF_ALU64``
-and a 4-bit 'code' field of ``BPF_END``.
+The byte swap instructions use instruction classes of ``ALU`` and ``ALU64``
+and a 4-bit 'code' field of ``END``.
 
 The byte swap instructions operate on the destination register
 only and do not use a separate source register or immediate value.
 
-For ``BPF_ALU``, the 1-bit source operand field in the opcode is used to
+For ``ALU``, the 1-bit source operand field in the opcode is used to
 select what byte order the operation converts from or to. For
-``BPF_ALU64``, the 1-bit source operand field in the opcode is reserved
+``ALU64``, the 1-bit source operand field in the opcode is reserved
 and must be set to 0.
 
-=========  =========  =====  =================================================
-class      source     value  description
-=========  =========  =====  =================================================
-BPF_ALU    BPF_TO_LE  0x00   convert between host byte order and little endian
-BPF_ALU    BPF_TO_BE  0x08   convert between host byte order and big endian
-BPF_ALU64  Reserved   0x00   do byte swap unconditionally
-=========  =========  =====  =================================================
+=====  ========  =====  =================================================
+class  source    value  description
+=====  ========  =====  =================================================
+ALU    TO_LE     0      convert between host byte order and little endian
+ALU    TO_BE     1      convert between host byte order and big endian
+ALU64  Reserved  0      do byte swap unconditionally
+=====  ========  =====  =================================================
 
 The 'imm' field encodes the width of the swap operations.  The following widths
-are supported: 16, 32 and 64.
+are supported: 16, 32 and 64.  Width 64 operations belong to the base64
+conformance group and other swap operations belong to the base32
+conformance group.
 
 Examples:
 
-``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means::
+``{END, TO_LE, ALU}`` with imm = 16/32/64 means::
 
   dst = htole16(dst)
   dst = htole32(dst)
   dst = htole64(dst)
 
-``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 16/32/64 means::
+``{END, TO_BE, ALU}`` with imm = 16/32/64 means::
 
   dst = htobe16(dst)
   dst = htobe32(dst)
   dst = htobe64(dst)
 
-``BPF_ALU64 | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means::
+``{END, TO_LE, ALU64}`` with imm = 16/32/64 means::
 
   dst = bswap16(dst)
   dst = bswap32(dst)
@@ -348,56 +432,61 @@ Examples:
 Jump instructions
 -----------------
 
-``BPF_JMP32`` uses 32-bit wide operands while ``BPF_JMP`` uses 64-bit wide operands for
-otherwise identical operations.
+``JMP32`` uses 32-bit wide operands and indicates the base32
+conformance group, while ``JMP`` uses 64-bit wide operands for
+otherwise identical operations, and indicates the base64 conformance
+group unless otherwise specified.
 The 'code' field encodes the operation as below:
 
-========  =====  ===  ===========================================  =========================================
-code      value  src  description                                  notes
-========  =====  ===  ===========================================  =========================================
-BPF_JA    0x0    0x0  PC += offset                                 BPF_JMP class
-BPF_JA    0x0    0x0  PC += imm                                    BPF_JMP32 class
-BPF_JEQ   0x1    any  PC += offset if dst == src
-BPF_JGT   0x2    any  PC += offset if dst > src                    unsigned
-BPF_JGE   0x3    any  PC += offset if dst >= src                   unsigned
-BPF_JSET  0x4    any  PC += offset if dst & src
-BPF_JNE   0x5    any  PC += offset if dst != src
-BPF_JSGT  0x6    any  PC += offset if dst > src                    signed
-BPF_JSGE  0x7    any  PC += offset if dst >= src                   signed
-BPF_CALL  0x8    0x0  call helper function by address              see `Helper functions`_
-BPF_CALL  0x8    0x1  call PC += imm                               see `Program-local functions`_
-BPF_CALL  0x8    0x2  call helper function by BTF ID               see `Helper functions`_
-BPF_EXIT  0x9    0x0  return                                       BPF_JMP only
-BPF_JLT   0xa    any  PC += offset if dst < src                    unsigned
-BPF_JLE   0xb    any  PC += offset if dst <= src                   unsigned
-BPF_JSLT  0xc    any  PC += offset if dst < src                    signed
-BPF_JSLE  0xd    any  PC += offset if dst <= src                   signed
-========  =====  ===  ===========================================  =========================================
-
-The BPF program needs to store the return value into register R0 before doing a
-``BPF_EXIT``.
+========  =====  =======  ===============================  ===================================================
+code      value  src_reg  description                      notes
+========  =====  =======  ===============================  ===================================================
+JA        0x0    0x0      PC += offset                     {JA, K, JMP} only
+JA        0x0    0x0      PC += imm                        {JA, K, JMP32} only
+JEQ       0x1    any      PC += offset if dst == src
+JGT       0x2    any      PC += offset if dst > src        unsigned
+JGE       0x3    any      PC += offset if dst >= src       unsigned
+JSET      0x4    any      PC += offset if dst & src
+JNE       0x5    any      PC += offset if dst != src
+JSGT      0x6    any      PC += offset if dst > src        signed
+JSGE      0x7    any      PC += offset if dst >= src       signed
+CALL      0x8    0x0      call helper function by address  {CALL, K, JMP} only, see `Helper functions`_
+CALL      0x8    0x1      call PC += imm                   {CALL, K, JMP} only, see `Program-local functions`_
+CALL      0x8    0x2      call helper function by BTF ID   {CALL, K, JMP} only, see `Helper functions`_
+EXIT      0x9    0x0      return                           {CALL, K, JMP} only
+JLT       0xa    any      PC += offset if dst < src        unsigned
+JLE       0xb    any      PC += offset if dst <= src       unsigned
+JSLT      0xc    any      PC += offset if dst < src        signed
+JSLE      0xd    any      PC += offset if dst <= src       signed
+========  =====  =======  ===============================  ===================================================
+
+The BPF program needs to store the return value into register R0 before doing an
+``EXIT``.
 
 Example:
 
-``BPF_JSGE | BPF_X | BPF_JMP32`` (0x7e) means::
+``{JSGE, X, JMP32}`` means::
 
   if (s32)dst s>= (s32)src goto +offset
 
 where 's>=' indicates a signed '>=' comparison.
 
-``BPF_JA | BPF_K | BPF_JMP32`` (0x06) means::
+``{JA, K, JMP32}`` means::
 
   gotol +imm
 
 where 'imm' means the branch offset comes from insn 'imm' field.
 
-Note that there are two flavors of ``BPF_JA`` instructions. The
-``BPF_JMP`` class permits a 16-bit jump offset specified by the 'offset'
-field, whereas the ``BPF_JMP32`` class permits a 32-bit jump offset
+Note that there are two flavors of ``JA`` instructions. The
+``JMP`` class permits a 16-bit jump offset specified by the 'offset'
+field, whereas the ``JMP32`` class permits a 32-bit jump offset
 specified by the 'imm' field. A > 16-bit conditional jump may be
 converted to a < 16-bit conditional jump plus a 32-bit unconditional
 jump.
 
+All ``CALL`` and ``JA`` instructions belong to the
+base32 conformance group.
+
 Helper functions
 ~~~~~~~~~~~~~~~~
 
@@ -416,78 +505,83 @@ Program-local functions
 ~~~~~~~~~~~~~~~~~~~~~~~
 Program-local functions are functions exposed by the same BPF program as the
 caller, and are referenced by offset from the call instruction, similar to
-``BPF_JA``.  The offset is encoded in the imm field of the call instruction.
-A ``BPF_EXIT`` within the program-local function will return to the caller.
+``JA``.  The offset is encoded in the imm field of the call instruction.
+A ``EXIT`` within the program-local function will return to the caller.
 
 Load and store instructions
 ===========================
 
-For load and store instructions (``BPF_LD``, ``BPF_LDX``, ``BPF_ST``, and ``BPF_STX``), the
-8-bit 'opcode' field is divided as:
-
-============  ======  =================
-3 bits (MSB)  2 bits  3 bits (LSB)
-============  ======  =================
-mode          size    instruction class
-============  ======  =================
-
-The mode modifier is one of:
-
-  =============  =====  ====================================  =============
-  mode modifier  value  description                           reference
-  =============  =====  ====================================  =============
-  BPF_IMM        0x00   64-bit immediate instructions         `64-bit immediate instructions`_
-  BPF_ABS        0x20   legacy BPF packet access (absolute)   `Legacy BPF Packet access instructions`_
-  BPF_IND        0x40   legacy BPF packet access (indirect)   `Legacy BPF Packet access instructions`_
-  BPF_MEM        0x60   regular load and store operations     `Regular load and store operations`_
-  BPF_MEMSX      0x80   sign-extension load operations        `Sign-extension load operations`_
-  BPF_ATOMIC     0xc0   atomic operations                     `Atomic operations`_
-  =============  =====  ====================================  =============
-
-The size modifier is one of:
-
-  =============  =====  =====================
-  size modifier  value  description
-  =============  =====  =====================
-  BPF_W          0x00   word        (4 bytes)
-  BPF_H          0x08   half word   (2 bytes)
-  BPF_B          0x10   byte
-  BPF_DW         0x18   double word (8 bytes)
-  =============  =====  =====================
+For load and store instructions (``LD``, ``LDX``, ``ST``, and ``STX``), the
+8-bit 'opcode' field is divided as::
+
+  +-+-+-+-+-+-+-+-+
+  |mode |sz |class|
+  +-+-+-+-+-+-+-+-+
+
+**mode**
+  The mode modifier is one of:
+
+    =============  =====  ====================================  =============
+    mode modifier  value  description                           reference
+    =============  =====  ====================================  =============
+    IMM            0      64-bit immediate instructions         `64-bit immediate instructions`_
+    ABS            1      legacy BPF packet access (absolute)   `Legacy BPF Packet access instructions`_
+    IND            2      legacy BPF packet access (indirect)   `Legacy BPF Packet access instructions`_
+    MEM            3      regular load and store operations     `Regular load and store operations`_
+    MEMSX          4      sign-extension load operations        `Sign-extension load operations`_
+    ATOMIC         6      atomic operations                     `Atomic operations`_
+    =============  =====  ====================================  =============
+
+**sz (size)**
+  The size modifier is one of:
+
+    ====  =====  =====================
+    size  value  description
+    ====  =====  =====================
+    W     0      word        (4 bytes)
+    H     1      half word   (2 bytes)
+    B     2      byte
+    DW    3      double word (8 bytes)
+    ====  =====  =====================
+
+  Instructions using ``DW`` belong to the base64 conformance group.
+
+**class**
+  The instruction class (see `Instruction classes`_)
 
 Regular load and store operations
 ---------------------------------
 
-The ``BPF_MEM`` mode modifier is used to encode regular load and store
+The ``MEM`` mode modifier is used to encode regular load and store
 instructions that transfer data between a register and memory.
 
-``BPF_MEM | <size> | BPF_STX`` means::
+``{MEM, <size>, STX}`` means::
 
   *(size *) (dst + offset) = src
 
-``BPF_MEM | <size> | BPF_ST`` means::
+``{MEM, <size>, ST}`` means::
 
-  *(size *) (dst + offset) = imm32
+  *(size *) (dst + offset) = imm
 
-``BPF_MEM | <size> | BPF_LDX`` means::
+``{MEM, <size>, LDX}`` means::
 
   dst = *(unsigned size *) (src + offset)
 
-Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW`` and
-'unsigned size' is one of u8, u16, u32 or u64.
+Where '<size>' is one of: ``B``, ``H``, ``W``, or ``DW``, and
+'unsigned size' is one of: u8, u16, u32, or u64.
 
 Sign-extension load operations
 ------------------------------
 
-The ``BPF_MEMSX`` mode modifier is used to encode :term:`sign-extension<Sign Extend>` load
+The ``MEMSX`` mode modifier is used to encode :term:`sign-extension<Sign Extend>` load
 instructions that transfer data between a register and memory.
 
-``BPF_MEMSX | <size> | BPF_LDX`` means::
+``{MEMSX, <size>, LDX}`` means::
 
   dst = *(signed size *) (src + offset)
 
-Where size is one of: ``BPF_B``, ``BPF_H`` or ``BPF_W``, and
-'signed size' is one of s8, s16 or s32.
+Where size is one of: ``B``, ``H``, or ``W``, and
+'signed size' is one of: s8, s16, or s32.
 
 Atomic operations
 -----------------
@@ -497,10 +591,12 @@ interrupted or corrupted by other access to the same memory region
 by other BPF programs or means outside of this specification.
 
 All atomic operations supported by BPF are encoded as store operations
-that use the ``BPF_ATOMIC`` mode modifier as follows:
+that use the ``ATOMIC`` mode modifier as follows:
 
-* ``BPF_ATOMIC | BPF_W | BPF_STX`` for 32-bit operations
-* ``BPF_ATOMIC | BPF_DW | BPF_STX`` for 64-bit operations
+* ``{ATOMIC, W, STX}`` for 32-bit operations, which are
+  part of the "atomic32" conformance group.
+* ``{ATOMIC, DW, STX}`` for 64-bit operations, which are
+  part of the "atomic64" conformance group.
 * 8-bit and 16-bit wide atomic operations are not supported.
 
 The 'imm' field is used to encode the actual atomic operation.
@@ -510,18 +606,18 @@ arithmetic operations in the 'imm' field to encode the atomic operation:
 ========  =====  ===========
 imm       value  description
 ========  =====  ===========
-BPF_ADD   0x00   atomic add
-BPF_OR    0x40   atomic or
-BPF_AND   0x50   atomic and
-BPF_XOR   0xa0   atomic xor
+ADD       0x00   atomic add
+OR        0x40   atomic or
+AND       0x50   atomic and
+XOR       0xa0   atomic xor
 ========  =====  ===========
 
 
-``BPF_ATOMIC | BPF_W  | BPF_STX`` with 'imm' = BPF_ADD means::
+``{ATOMIC, W, STX}`` with 'imm' = ADD means::
 
   *(u32 *)(dst + offset) += src
 
-``BPF_ATOMIC | BPF_DW | BPF_STX`` with 'imm' = BPF ADD means::
+``{ATOMIC, DW, STX}`` with 'imm' = ADD means::
 
   *(u64 *)(dst + offset) += src
 
@@ -531,20 +627,20 @@ two complex atomic operations:
 ===========  ================  ===========================
 imm          value             description
 ===========  ================  ===========================
-BPF_FETCH    0x01              modifier: return old value
-BPF_XCHG     0xe0 | BPF_FETCH  atomic exchange
-BPF_CMPXCHG  0xf0 | BPF_FETCH  atomic compare and exchange
+FETCH        0x01              modifier: return old value
+XCHG         0xe0 | FETCH      atomic exchange
+CMPXCHG      0xf0 | FETCH      atomic compare and exchange
 ===========  ================  ===========================
 
-The ``BPF_FETCH`` modifier is optional for simple atomic operations, and
-always set for the complex atomic operations.  If the ``BPF_FETCH`` flag
+The ``FETCH`` modifier is optional for simple atomic operations, and
+always set for the complex atomic operations.  If the ``FETCH`` flag
 is set, then the operation also overwrites ``src`` with the value that
 was in memory before it was modified.
 
-The ``BPF_XCHG`` operation atomically exchanges ``src`` with the value
+The ``XCHG`` operation atomically exchanges ``src`` with the value
 addressed by ``dst + offset``.
 
-The ``BPF_CMPXCHG`` operation atomically compares the value addressed by
+The ``CMPXCHG`` operation atomically compares the value addressed by
 ``dst + offset`` with ``R0``. If they match, the value addressed by
 ``dst + offset`` is replaced with ``src``. In either case, the
 value that was at ``dst + offset`` before the operation is zero-extended
@@ -553,25 +649,25 @@ and loaded back to ``R0``.
 64-bit immediate instructions
 -----------------------------
 
-Instructions with the ``BPF_IMM`` 'mode' modifier use the wide instruction
-encoding defined in `Instruction encoding`_, and use the 'src' field of the
+Instructions with the ``IMM`` 'mode' modifier use the wide instruction
+encoding defined in `Instruction encoding`_, and use the 'src_reg' field of the
 basic instruction to hold an opcode subtype.
 
-The following table defines a set of ``BPF_IMM | BPF_DW | BPF_LD`` instructions
-with opcode subtypes in the 'src' field, using new terms such as "map"
+The following table defines a set of ``{IMM, DW, LD}`` instructions
+with opcode subtypes in the 'src_reg' field, using new terms such as "map"
 defined further below:
 
-=========================  ======  ===  =========================================  ===========  ==============
-opcode construction        opcode  src  pseudocode                                 imm type     dst type
-=========================  ======  ===  =========================================  ===========  ==============
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x0  dst = imm64                                integer      integer
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x1  dst = map_by_fd(imm)                       map fd       map
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x2  dst = map_val(map_by_fd(imm)) + next_imm   map fd       data pointer
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x3  dst = var_addr(imm)                        variable id  data pointer
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x4  dst = code_addr(imm)                       integer      code pointer
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x5  dst = map_by_idx(imm)                      map index    map
-BPF_IMM | BPF_DW | BPF_LD  0x18    0x6  dst = map_val(map_by_idx(imm)) + next_imm  map index    data pointer
-=========================  ======  ===  =========================================  ===========  ==============
+=======  =========================================  ===========  ==============
+src_reg  pseudocode                                 imm type     dst type
+=======  =========================================  ===========  ==============
+0x0      dst = (next_imm << 32) | imm               integer      integer
+0x1      dst = map_by_fd(imm)                       map fd       map
+0x2      dst = map_val(map_by_fd(imm)) + next_imm   map fd       data pointer
+0x3      dst = var_addr(imm)                        variable id  data pointer
+0x4      dst = code_addr(imm)                       integer      code pointer
+0x5      dst = map_by_idx(imm)                      map index    map
+0x6      dst = map_val(map_by_idx(imm)) + next_imm  map index    data pointer
+=======  =========================================  ===========  ==============
 
 where
 
@@ -609,5 +705,9 @@ Legacy BPF Packet access instructions
 -------------------------------------
 
 BPF previously introduced special instructions for access to packet data that were
-carried over from classic BPF. However, these instructions are
-deprecated and should no longer be used.
+carried over from classic BPF. These instructions used an instruction
+class of ``LD``, a size modifier of ``W``, ``H``, or ``B``, and a
+mode modifier of ``ABS`` or ``IND``.  The 'dst_reg' and 'offset' fields were
+set to zero, and 'src_reg' was set to zero for ``ABS``.  However, these
+instructions are deprecated and should no longer be used.  All legacy packet
+access instructions belong to the "packet" conformance group.
diff --git linux-libre-6.8-gnu/Documentation/bpf/verifier.rst linux-libre-6.9-rc6-gnu/Documentation/bpf/verifier.rst
index f0ec19db301c..356894399fbf 100644
--- linux-libre-6.8-gnu/Documentation/bpf/verifier.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/bpf/verifier.rst
@@ -562,7 +562,7 @@ works::
   * ``checkpoint[0].r1`` is marked as read;
 
 * At instruction #5 exit is reached and ``checkpoint[0]`` can now be processed
-  by ``clean_live_states()``. After this processing ``checkpoint[0].r0`` has a
+  by ``clean_live_states()``. After this processing ``checkpoint[0].r1`` has a
   read mark and all other registers and stack slots are marked as ``NOT_INIT``
   or ``STACK_INVALID``
 
diff --git linux-libre-6.8-gnu/Documentation/conf.py linux-libre-6.9-rc6-gnu/Documentation/conf.py
index da64c9fb7e07..d148f3e8dd57 100644
--- linux-libre-6.8-gnu/Documentation/conf.py
+++ linux-libre-6.9-rc6-gnu/Documentation/conf.py
@@ -346,9 +346,9 @@ sys.stderr.write("Using %s theme\n" % html_theme)
 html_static_path = ['sphinx-static']
 
 # If true, Docutils "smart quotes" will be used to convert quotes and dashes
-# to typographically correct entities.  This will convert "--" to "—",
-# which is not always what we want, so disable it.
-smartquotes = False
+# to typographically correct entities.  However, conversion of "--" to "—"
+# is not always what we want, so enable only quotes.
+smartquotes_action = 'q'
 
 # Custom sidebar templates, maps document names to template names.
 # Note that the RTD theme ignores this
diff --git linux-libre-6.8-gnu/Documentation/core-api/workqueue.rst linux-libre-6.9-rc6-gnu/Documentation/core-api/workqueue.rst
index 3599cf9267b4..ed73c612174d 100644
--- linux-libre-6.8-gnu/Documentation/core-api/workqueue.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/core-api/workqueue.rst
@@ -77,10 +77,12 @@ wants a function to be executed asynchronously it has to set up a work
 item pointing to that function and queue that work item on a
 workqueue.
 
-Special purpose threads, called worker threads, execute the functions
-off of the queue, one after the other.  If no work is queued, the
-worker threads become idle.  These worker threads are managed in so
-called worker-pools.
+A work item can be executed in either a thread or the BH (softirq) context.
+
+For threaded workqueues, special purpose threads, called [k]workers, execute
+the functions off of the queue, one after the other. If no work is queued,
+the worker threads become idle. These worker threads are managed in
+worker-pools.
 
 The cmwq design differentiates between the user-facing workqueues that
 subsystems and drivers queue work items on and the backend mechanism
@@ -91,6 +93,12 @@ for high priority ones, for each possible CPU and some extra
 worker-pools to serve work items queued on unbound workqueues - the
 number of these backing pools is dynamic.
 
+BH workqueues use the same framework. However, as there can only be one
+concurrent execution context, there's no need to worry about concurrency.
+Each per-CPU BH worker pool contains only one pseudo worker which represents
+the BH execution context. A BH workqueue can be considered a convenience
+interface to softirq.
+
 Subsystems and drivers can create and queue work items through special
 workqueue API functions as they see fit. They can influence some
 aspects of the way the work items are executed by setting flags on the
@@ -106,7 +114,7 @@ unless specifically overridden, a work item of a bound workqueue will
 be queued on the worklist of either normal or highpri worker-pool that
 is associated to the CPU the issuer is running on.
 
-For any worker pool implementation, managing the concurrency level
+For any thread pool implementation, managing the concurrency level
 (how many execution contexts are active) is an important issue.  cmwq
 tries to keep the concurrency at a minimal but sufficient level.
 Minimal to save resources and sufficient in that the system is used at
@@ -164,6 +172,17 @@ resources, scheduled and executed.
 ``flags``
 ---------
 
+``WQ_BH``
+  BH workqueues can be considered a convenience interface to softirq. BH
+  workqueues are always per-CPU and all BH work items are executed in the
+  queueing CPU's softirq context in the queueing order.
+
+  All BH workqueues must have 0 ``max_active`` and ``WQ_HIGHPRI`` is the
+  only allowed additional flag.
+
+  BH work items cannot sleep. All other features such as delayed queueing,
+  flushing and canceling are supported.
+
 ``WQ_UNBOUND``
   Work items queued to an unbound wq are served by the special
   worker-pools which host workers which are not bound to any
@@ -237,15 +256,11 @@ may queue at the same time.  Unless there is a specific need for
 throttling the number of active work items, specifying '0' is
 recommended.
 
-Some users depend on the strict execution ordering of ST wq.  The
-combination of ``@max_active`` of 1 and ``WQ_UNBOUND`` used to
-achieve this behavior.  Work items on such wq were always queued to the
-unbound worker-pools and only one work item could be active at any given
-time thus achieving the same ordering property as ST wq.
-
-In the current implementation the above configuration only guarantees
-ST behavior within a given NUMA node. Instead ``alloc_ordered_workqueue()`` should
-be used to achieve system-wide ST behavior.
+Some users depend on strict execution ordering where only one work item
+is in flight at any given time and the work items are processed in
+queueing order. While the combination of ``@max_active`` of 1 and
+``WQ_UNBOUND`` used to achieve this behavior, this is no longer the
+case. Use ``alloc_ordered_queue()`` instead.
 
 
 Example Execution Scenarios
diff --git linux-libre-6.8-gnu/Documentation/dev-tools/checkpatch.rst linux-libre-6.9-rc6-gnu/Documentation/dev-tools/checkpatch.rst
index c3389c6f3838..127968995847 100644
--- linux-libre-6.8-gnu/Documentation/dev-tools/checkpatch.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/dev-tools/checkpatch.rst
@@ -168,7 +168,7 @@ Available options:
 
  - --fix
 
-   This is an EXPERIMENTAL feature.  If correctable errors exists, a file
+   This is an EXPERIMENTAL feature.  If correctable errors exist, a file
    <inputfile>.EXPERIMENTAL-checkpatch-fixes is created which has the
    automatically fixable errors corrected.
 
@@ -181,7 +181,7 @@ Available options:
 
  - --ignore-perl-version
 
-   Override checking of perl version.  Runtime errors maybe encountered after
+   Override checking of perl version.  Runtime errors may be encountered after
    enabling this flag if the perl version does not meet the minimum specified.
 
  - --codespell
diff --git linux-libre-6.8-gnu/Documentation/dev-tools/kasan.rst linux-libre-6.9-rc6-gnu/Documentation/dev-tools/kasan.rst
index 858c77fe7dc4..d7de44f5339d 100644
--- linux-libre-6.8-gnu/Documentation/dev-tools/kasan.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/dev-tools/kasan.rst
@@ -169,7 +169,7 @@ Error reports
 A typical KASAN report looks like this::
 
     ==================================================================
-    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan]
+    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [kasan_test]
     Write of size 1 at addr ffff8801f44ec37b by task insmod/2760
 
     CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698
@@ -179,8 +179,8 @@ A typical KASAN report looks like this::
      print_address_description+0x73/0x280
      kasan_report+0x144/0x187
      __asan_report_store1_noabort+0x17/0x20
-     kmalloc_oob_right+0xa8/0xbc [test_kasan]
-     kmalloc_tests_init+0x16/0x700 [test_kasan]
+     kmalloc_oob_right+0xa8/0xbc [kasan_test]
+     kmalloc_tests_init+0x16/0x700 [kasan_test]
      do_one_initcall+0xa5/0x3ae
      do_init_module+0x1b6/0x547
      load_module+0x75df/0x8070
@@ -200,8 +200,8 @@ A typical KASAN report looks like this::
      save_stack+0x43/0xd0
      kasan_kmalloc+0xa7/0xd0
      kmem_cache_alloc_trace+0xe1/0x1b0
-     kmalloc_oob_right+0x56/0xbc [test_kasan]
-     kmalloc_tests_init+0x16/0x700 [test_kasan]
+     kmalloc_oob_right+0x56/0xbc [kasan_test]
+     kmalloc_tests_init+0x16/0x700 [kasan_test]
      do_one_initcall+0xa5/0x3ae
      do_init_module+0x1b6/0x547
      load_module+0x75df/0x8070
@@ -277,6 +277,27 @@ traces point to places in code that interacted with the object but that are not
 directly present in the bad access stack trace. Currently, this includes
 call_rcu() and workqueue queuing.
 
+CONFIG_KASAN_EXTRA_INFO
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Enabling CONFIG_KASAN_EXTRA_INFO allows KASAN to record and report more
+information. The extra information currently supported is the CPU number and
+timestamp at allocation and free. More information can help find the cause of
+the bug and correlate the error with other system events, at the cost of using
+extra memory to record more information (more cost details in the help text of
+CONFIG_KASAN_EXTRA_INFO).
+
+Here is the report with CONFIG_KASAN_EXTRA_INFO enabled (only the
+different parts are shown)::
+
+    ==================================================================
+    ...
+    Allocated by task 134 on cpu 5 at 229.133855s:
+    ...
+    Freed by task 136 on cpu 3 at 230.199335s:
+    ...
+    ==================================================================
+
 Implementation details
 ----------------------
 
@@ -510,15 +531,15 @@ When a test passes::
 
 When a test fails due to a failed ``kmalloc``::
 
-        # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
+        # kmalloc_large_oob_right: ASSERTION FAILED at mm/kasan/kasan_test.c:245
         Expected ptr is not null, but is
-        not ok 4 - kmalloc_large_oob_right
+        not ok 5 - kmalloc_large_oob_right
 
 When a test fails due to a missing KASAN report::
 
-        # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974
+        # kmalloc_double_kzfree: EXPECTATION FAILED at mm/kasan/kasan_test.c:709
         KASAN failure expected in "kfree_sensitive(ptr)", but none occurred
-        not ok 44 - kmalloc_double_kzfree
+        not ok 28 - kmalloc_double_kzfree
 
 
 At the end the cumulative status of all KASAN tests is printed. On success::
@@ -534,7 +555,7 @@ There are a few ways to run KUnit-compatible KASAN tests.
 1. Loadable module
 
    With ``CONFIG_KUNIT`` enabled, KASAN-KUnit tests can be built as a loadable
-   module and run by loading ``test_kasan.ko`` with ``insmod`` or ``modprobe``.
+   module and run by loading ``kasan_test.ko`` with ``insmod`` or ``modprobe``.
 
 2. Built-In
 
diff --git linux-libre-6.8-gnu/Documentation/dev-tools/kselftest.rst linux-libre-6.9-rc6-gnu/Documentation/dev-tools/kselftest.rst
index ab376b316c36..ff10dc6eef5d 100644
--- linux-libre-6.8-gnu/Documentation/dev-tools/kselftest.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/dev-tools/kselftest.rst
@@ -245,6 +245,10 @@ Contributing new tests (details)
    TEST_PROGS, TEST_GEN_PROGS mean it is the executable tested by
    default.
 
+   TEST_GEN_MODS_DIR should be used by tests that require modules to be built
+   before the test starts. The variable will contain the name of the directory
+   containing the modules.
+
    TEST_CUSTOM_PROGS should be used by tests that require custom build
    rules and prevent common build rule use.
 
@@ -255,9 +259,21 @@ Contributing new tests (details)
 
    TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the
    executable which is not tested by default.
+
    TEST_FILES, TEST_GEN_FILES mean it is the file which is used by
    test.
 
+   TEST_INCLUDES is similar to TEST_FILES, it lists files which should be
+   included when exporting or installing the tests, with the following
+   differences:
+
+    * symlinks to files in other directories are preserved
+    * the part of paths below tools/testing/selftests/ is preserved when
+      copying the files to the output directory
+
+   TEST_INCLUDES is meant to list dependencies located in other directories of
+   the selftests hierarchy.
+
  * First use the headers inside the kernel source and/or git repo, and then the
    system headers.  Headers for the kernel release as opposed to headers
    installed by the distro on the system should be the primary focus to be able
diff --git linux-libre-6.8-gnu/Documentation/dev-tools/testing-overview.rst linux-libre-6.9-rc6-gnu/Documentation/dev-tools/testing-overview.rst
index 0aaf6ea53608..1619e5e5cc9c 100644
--- linux-libre-6.8-gnu/Documentation/dev-tools/testing-overview.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/dev-tools/testing-overview.rst
@@ -104,6 +104,8 @@ Some of these tools are listed below:
   KASAN and can be used in production. See Documentation/dev-tools/kfence.rst
 * lockdep is a locking correctness validator. See
   Documentation/locking/lockdep-design.rst
+* Runtime Verification (RV) supports checking specific behaviours for a given
+  subsystem. See Documentation/trace/rv/runtime-verification.rst
 * There are several other pieces of debug instrumentation in the kernel, many
   of which can be found in lib/Kconfig.debug
 
diff --git linux-libre-6.8-gnu/Documentation/dev-tools/ubsan.rst linux-libre-6.9-rc6-gnu/Documentation/dev-tools/ubsan.rst
index 2de7c63415da..e3591f8e9d5b 100644
--- linux-libre-6.8-gnu/Documentation/dev-tools/ubsan.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/dev-tools/ubsan.rst
@@ -49,34 +49,22 @@ Report example
 Usage
 -----
 
-To enable UBSAN configure kernel with::
+To enable UBSAN, configure the kernel with::
 
-	CONFIG_UBSAN=y
+  CONFIG_UBSAN=y
 
-and to check the entire kernel::
-
-        CONFIG_UBSAN_SANITIZE_ALL=y
-
-To enable instrumentation for specific files or directories, add a line
-similar to the following to the respective kernel Makefile:
-
-- For a single file (e.g. main.o)::
-
-    UBSAN_SANITIZE_main.o := y
-
-- For all files in one directory::
-
-    UBSAN_SANITIZE := y
-
-To exclude files from being instrumented even if
-``CONFIG_UBSAN_SANITIZE_ALL=y``, use::
+To exclude files from being instrumented use::
 
   UBSAN_SANITIZE_main.o := n
 
-and::
+and to exclude all targets in one directory use::
 
   UBSAN_SANITIZE := n
 
+When disabled for all targets, specific files can be enabled using::
+
+  UBSAN_SANITIZE_main.o := y
+
 Detection of unaligned accesses controlled through the separate option -
 CONFIG_UBSAN_ALIGNMENT. It's off by default on architectures that support
 unaligned accesses (CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y). One could
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/Makefile linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/Makefile
index 129cf698fa8a..5e08e3a6a97b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/Makefile
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/Makefile
@@ -64,9 +64,6 @@ override DTC_FLAGS := \
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 
-# Disable undocumented compatible checks until warning free
-override DT_CHECKER_FLAGS ?=
-
 $(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
 	$(call if_changed_rule,chkdt)
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
index caab7ceeda45..949537cea6be 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -7,19 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Amlogic SoC based Platforms
 
 maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+  - Jerome Brunet <jbrunet@baylibre.com>
   - Kevin Hilman <khilman@baylibre.com>
 
-description: |+
-  Work in progress statement:
-
-  Device tree files and bindings applying to Amlogic SoCs and boards are
-  considered "unstable". Any Amlogic device tree binding may change at
-  any time. Be sure to use a device tree binary and a kernel image
-  generated from the same source tree.
-
-  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-  stable binding/ABI.
-
 properties:
   $nodename:
     const: '/'
@@ -146,6 +138,7 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - freebox,fbx8am
               - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml
index d1bdee98f9af..3c5f1688dbd7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -10,9 +10,9 @@ maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 description: |+
-  The ARM RealView series of reference designs were built to explore the ARM
-  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
-  the earlier CPUs such as TrustZone and multicore (MPCore).
+  The ARM RealView series of reference designs were built to explore the Arm11,
+  Cortex-A8, and Cortex-A9 CPUs. This included new features compared to the
+  earlier CPUs such as TrustZone and multicore (MPCore).
 
 properties:
   $nodename:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 89d75fbb1de4..82f37328cc69 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -179,6 +179,12 @@ properties:
           - const: microchip,sama7g5
           - const: microchip,sama7
 
+      - description: Microchip SAMA7G54 Curiosity Board
+        items:
+          - const: microchip,sama7g54-curiosity
+          - const: microchip,sama7g5
+          - const: microchip,sama7
+
       - description: Microchip LAN9662 Evaluation Boards.
         items:
           - enum:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/fsl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
index 228dcc5c7d6f..0027201e19f8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -384,7 +384,8 @@ properties:
               - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
               - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
               - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
-              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.0/v1.1
+              - toradex,apalis_imx6q-eval-v1.2  # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
 
@@ -469,6 +470,7 @@ properties:
               - prt,prtvt7                # Protonic VT7 board
               - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
               - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - sielaff,imx6dl-board      # Sielaff i.MX6 Solo Board
               - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
               - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
               - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
@@ -708,6 +710,7 @@ properties:
               - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
               - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
               - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
+              - uni-t,uti260b             # UNI-T UTi260B Thermal Camera
           - const: fsl,imx6ull
 
       - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -1026,7 +1029,7 @@ properties:
         items:
           - enum:
               - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
-              - rve,rve-gateway # i.MX8MN RVE Gateway Board
+              - rve,gateway # i.MX8MN RVE Gateway Board
               - variscite,var-som-mx8mn-symphony
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
@@ -1194,7 +1197,8 @@ properties:
       - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
         items:
           - enum:
-              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation Board
+              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
+              - toradex,apalis-imx8-eval-v1.2       # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
               - toradex,apalis-imx8-ixora-v1.1      # Apalis iMX8 Module on Ixora V1.1 Carrier Board
           - const: toradex,apalis-imx8
           - const: fsl,imx8qm
@@ -1202,7 +1206,8 @@ properties:
       - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
         items:
           - enum:
-              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
+              - toradex,apalis-imx8-v1.1-eval-v1.2  # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
               - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
               - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
           - const: toradex,apalis-imx8-v1.1
@@ -1232,6 +1237,22 @@ properties:
           - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
+      - description:
+          TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip
+          variants. It is designed to be clicked on different carrier boards
+          MBa8Xx is the starterkit
+        oneOf:
+          - items:
+              - enum:
+                  - tq,imx8dxp-tqma8xdp-mba8xx # TQ-Systems GmbH TQMa8XDP SOM on MBa8Xx
+              - const: tq,imx8dxp-tqma8xdp     # TQ-Systems GmbH TQMa8XDP SOM (with i.MX8DXP)
+              - const: fsl,imx8dxp
+          - items:
+              - enum:
+                  - tq,imx8qxp-tqma8xqp-mba8xx # TQ-Systems GmbH TQMa8XQP SOM on MBa8Xx
+              - const: tq,imx8qxp-tqma8xqp     # TQ-Systems GmbH TQMa8XQP SOM (with i.MX8QXP)
+              - const: fsl,imx8qxp
+
       - description: i.MX8ULP based Boards
         items:
           - enum:
@@ -1275,6 +1296,18 @@ properties:
           - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
           - const: fsl,imx93
 
+      - description: PHYTEC phyCORE-i.MX93 SoM based boards
+        items:
+          - const: phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93
+          - const: phytec,imx93-phycore-som    # phyCORE-i.MX93 SoM
+          - const: fsl,imx93
+
+      - description: Variscite VAR-SOM-MX93 based boards
+        items:
+          - const: variscite,var-som-mx93-symphony
+          - const: variscite,var-som-mx93
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt
deleted file mode 100644
index 202953f1887e..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell Armada 38x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 38x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada380"
-
-In addition, boards using the Marvell Armada 385 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada385"
-
-In addition, boards using the Marvell Armada 388 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada388"
-
-Example:
-
-compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
new file mode 100644
index 000000000000..cdf805b5db95
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-38x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 38x Platforms
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description:
+          Netgear Armada 380 GS110EM Managed Switch.
+        items:
+          - const: netgear,gs110emx
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 385 Development Boards.
+        items:
+          - enum:
+              - marvell,a385-db-amc
+              - marvell,a385-db-ap
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 385 based single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-gtr-l8
+              - solidrun,clearfog-gtr-s4
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Kobol Armada 388 based Helios-4 NAS.
+        items:
+          - const: kobol,helios4
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 388 Development Boards.
+        items:
+          - enum:
+              - marvell,a388-gp
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 388 clearfog family single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-base-a1
+              - solidrun,clearfog-pro-a1
+          - const: solidrun,clearfog-a1
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
index 6f2f64ae76fc..09f9ffd3ff7b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -17,6 +17,7 @@ properties:
     const: '/'
   compatible:
     oneOf:
+      # Sort by SoC (last) compatible, then board compatible
       - items:
           - enum:
               - mediatek,mt2701-evb
@@ -84,6 +85,11 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - xiaomi,ax3000t
+          - const: mediatek,mt7981b
+      - items:
+          - enum:
+              - acelink,ew-7886cax
               - bananapi,bpi-r3
               - mediatek,mt7986a-rfb
           - const: mediatek,mt7986a
@@ -91,6 +97,10 @@ properties:
           - enum:
               - mediatek,mt7986b-rfb
           - const: mediatek,mt7986b
+      - items:
+          - enum:
+              - bananapi,bpi-r4
+          - const: mediatek,mt7988a
       - items:
           - enum:
               - mediatek,mt8127-moose
@@ -129,75 +139,10 @@ properties:
           - enum:
               - mediatek,mt8173-evb
           - const: mediatek,mt8173
-      - items:
-          - enum:
-              - mediatek,mt8183-evb
-          - const: mediatek,mt8183
-      - description: Google Hayato rev5
-        items:
-          - const: google,hayato-rev5-sku2
-          - const: google,hayato-sku2
-          - const: google,hayato
-          - const: mediatek,mt8192
-      - description: Google Hayato
-        items:
-          - const: google,hayato-rev1
-          - const: google,hayato
-          - const: mediatek,mt8192
-      - description: Google Spherion rev4 (Acer Chromebook 514)
-        items:
-          - const: google,spherion-rev4
-          - const: google,spherion
-          - const: mediatek,mt8192
-      - description: Google Spherion (Acer Chromebook 514)
-        items:
-          - const: google,spherion-rev3
-          - const: google,spherion-rev2
-          - const: google,spherion-rev1
-          - const: google,spherion-rev0
-          - const: google,spherion
-          - const: mediatek,mt8192
-      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
-        items:
-          - enum:
-              - google,tomato-rev2
-              - google,tomato-rev1
-          - const: google,tomato
-          - const: mediatek,mt8195
-      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
-        items:
-          - const: google,tomato-rev4
-          - const: google,tomato-rev3
-          - const: google,tomato
-          - const: mediatek,mt8195
-      - items:
-          - enum:
-              - mediatek,mt8186-evb
-          - const: mediatek,mt8186
-      - items:
-          - enum:
-              - mediatek,mt8188-evb
-          - const: mediatek,mt8188
-      - items:
-          - enum:
-              - mediatek,mt8192-evb
-          - const: mediatek,mt8192
-      - items:
-          - enum:
-              - mediatek,mt8195-demo
-              - mediatek,mt8195-evb
-          - const: mediatek,mt8195
       - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
         items:
           - const: google,burnet
           - const: mediatek,mt8183
-      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
-        items:
-          - enum:
-              - google,krane-sku0
-              - google,krane-sku176
-          - const: google,krane
-          - const: mediatek,mt8183
       - description: Google Cozmo (Acer Chromebook 314)
         items:
           - const: google,cozmo
@@ -255,6 +200,13 @@ properties:
               - google,kodama-sku32
           - const: google,kodama
           - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - enum:
+              - google,krane-sku0
+              - google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
       - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
         items:
           - enum:
@@ -276,10 +228,125 @@ properties:
               - google,willow-sku1
           - const: google,willow
           - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8183-evb
+          - const: mediatek,mt8183
       - items:
           - enum:
               - mediatek,mt8183-pumpkin
           - const: mediatek,mt8183
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393219
+          - const: google,steelix-sku393216
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393220
+          - const: google,steelix-sku393217
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393221
+          - const: google,steelix-sku393218
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Rusty (Lenovo 100e Chromebook Gen 4)
+        items:
+          - const: google,steelix-sku196609
+          - const: google,steelix-sku196608
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
+        items:
+          - enum:
+              - google,steelix-sku131072
+              - google,steelix-sku131073
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262147
+          - const: google,tentacruel-sku262146
+          - const: google,tentacruel-sku262145
+          - const: google,tentacruel-sku262144
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262151
+          - const: google,tentacruel-sku262150
+          - const: google,tentacruel-sku262149
+          - const: google,tentacruel-sku262148
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327681
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327683
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8188-evb
+          - const: mediatek,mt8188
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Hayato rev5
+        items:
+          - const: google,hayato-rev5-sku2
+          - const: google,hayato-sku2
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Google Spherion rev4 (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev4
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
       - items:
           - enum:
               - mediatek,mt8365-evk
@@ -287,6 +354,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8395-evk
+              - radxa,nio-12l
           - const: mediatek,mt8395
           - const: mediatek,mt8195
       - items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
deleted file mode 100644
index 323905af82c3..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Mediatek hifsys controller
-============================
-
-The Mediatek hifsys controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-hifsys", "syscon"
-	- "mediatek,mt7622-hifsys", "syscon"
-	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
-- #clock-cells: Must be 1
-
-The hifsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-hifsys: clock-controller@1a000000 {
-	compatible = "mediatek,mt2701-hifsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
deleted file mode 100644
index d179a61536f4..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek PCIESYS controller
-============================
-
-The MediaTek PCIESYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-pciesys", "syscon"
-	- "mediatek,mt7629-pciesys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The PCIESYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-pciesys: pciesys@1a100800 {
-	compatible = "mediatek,mt7622-pciesys", "syscon";
-	reg = <0 0x1a100800 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
deleted file mode 100644
index 7cb02c930613..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek SSUSBSYS controller
-============================
-
-The MediaTek SSUSBSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-ssusbsys", "syscon"
-	- "mediatek,mt7629-ssusbsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The SSUSBSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ssusbsys: ssusbsys@1a000000 {
-	compatible = "mediatek,mt7622-ssusbsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
deleted file mode 100644
index c0e3c3a42bea..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SPM AVS Wrapper 2 (SAW2)
-
-The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
-Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
-power-controller that transitions a piece of hardware (like a processor or
-subsystem) into and out of low power modes via a direct connection to
-the PMIC. It can also be wired up to interact with other processors in the
-system, notifying them when a low power state is entered or exited.
-
-Multiple revisions of the SAW hardware are supported using these Device Nodes.
-SAW2 revisions differ in the register offset and configuration data. Also, the
-same revision of the SAW in different SoCs may have different configuration
-data due the differences in hardware capabilities. Hence the SoC name, the
-version of the SAW hardware in that SoC and the distinction between cpu (big
-or Little) or cache, may be needed to uniquely identify the SAW register
-configuration and initialization data. The compatible string is used to
-indicate this parameter.
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Must have
-			"qcom,saw2"
-		    A more specific value could be one of:
-			"qcom,apq8064-saw2-v1.1-cpu"
-			"qcom,msm8226-saw2-v2.1-cpu"
-			"qcom,msm8974-saw2-v2.1-cpu"
-			"qcom,apq8084-saw2-v2.1-cpu"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first element specifies the base address and size of
-		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
-
-- regulator:
-	Usage: optional
-	Value type: boolean
-	Definition: Indicates that this SPM device acts as a regulator device
-			device for the core (CPU or Cache) the SPM is attached
-			to.
-
-Example 1:
-
-	power-controller@2099000 {
-		compatible = "qcom,saw2";
-		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-		regulator;
-	};
-
-Example 2:
-	saw0: power-controller@f9089000 {
-		compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-		reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 61ddc3b5b247..8eec07d9d454 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -44,14 +44,21 @@ properties:
     minItems: 1
     maxItems: 2
 
-  qcom,dsb-element-size:
+  qcom,dsb-element-bits:
     description:
       Specifies the DSB(Discrete Single Bit) element size supported by
       the monitor. The associated aggregator will read this size before it
       is enabled. DSB element size currently only supports 32-bit and 64-bit.
-    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [32, 64]
 
+  qcom,cmb-element-bits:
+    description:
+      Specifies the CMB(Continuous Multi-Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. CMB element size currently only supports 8-bit, 32-bit
+      and 64-bit.
+    enum: [8, 32, 64]
+
   qcom,dsb-msrs-num:
     description:
       Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
@@ -61,6 +68,15 @@ properties:
     minimum: 0
     maximum: 32
 
+  qcom,cmb-msrs-num:
+    description:
+      Specifies the number of CMB MSR(mux select register) registers supported
+      by the monitor. If this property is not configured or set to 0, it means
+      this TPDM doesn't support CMB MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -94,7 +110,7 @@ examples:
       compatible = "qcom,coresight-tpdm", "arm,primecell";
       reg = <0x0684c000 0x1000>;
 
-      qcom,dsb-element-size = /bits/ 8 <32>;
+      qcom,dsb-element-bits = <32>;
       qcom,dsb-msrs-num = <16>;
 
       clocks = <&aoss_qmp>;
@@ -110,4 +126,22 @@ examples:
       };
     };
 
+    tpdm@6c29000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x06c29000 0x1000>;
+
+      qcom,cmb-element-bits = <64>;
+      qcom,cmb-msrs-num = <32>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_ipcc_out_funnel_center: endpoint {
+            remote-endpoint = <&funnel_center_in_tpdm_ipcc>;
+          };
+        };
+      };
+    };
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index 1a5fb889a444..66beaac60e1d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -10,17 +10,10 @@ maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Some qcom based bootloaders identify the dtb blob based on a set of
-  device properties like SoC and platform and revisions of those components.
-  To support this scheme, we encode this information into the board compatible
-  string.
-
-  Each board must specify a top-level board compatible string with the following
-  format:
-
-  	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
-
-  The 'SoC' and 'board' elements are required. All other elements are optional.
+  For devices using the Qualcomm SoC the "compatible" properties consists of
+  one or several "manufacturer,model" strings, describing the device itself,
+  followed by one or several "qcom,<SoC>" strings, describing the SoC used in
+  the device.
 
   The 'SoC' element must be one of the following strings:
 
@@ -90,43 +83,9 @@ description: |
         sm8650
         x1e80100
 
-  The 'board' element must be one of the following strings:
-
-        adp
-        cdp
-        dragonboard
-        idp
-        liquid
-        mtp
-        qcp
-        qrd
-        rb2
-        ride
-        sbc
-        x100
-
-  The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
-  where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
-  as v1. If all versions of the 'board_version' elements match, then a
-  wildcard '*' should be used, e.g. 'v*'.
-
-  The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
-
-  Examples:
-
-  	"qcom,msm8916-v1-cdp-pm8916-v2.1"
-
-  A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
-  2.1.
-
-  	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
-
-  A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
-  foundry 2.
-
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
-  OS. These devices do not use the scheme described above. For details, see:
+  OS. These devices use the bootflow explained at
   https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
@@ -187,6 +146,7 @@ properties:
               - microsoft,superman-lte
               - microsoft,tesla
               - motorola,peregrine
+              - samsung,matisselte
           - const: qcom,msm8926
           - const: qcom,msm8226
 
@@ -244,11 +204,15 @@ properties:
               - samsung,a5u-eur
               - samsung,e5
               - samsung,e7
+              - samsung,fortuna3g
+              - samsung,gprimeltecan
               - samsung,grandmax
+              - samsung,grandprimelte
               - samsung,gt510
               - samsung,gt58
               - samsung,j5
               - samsung,j5x
+              - samsung,rossa
               - samsung,serranove
               - thwc,uf896
               - thwc,ufi001c
@@ -988,6 +952,7 @@ properties:
 
       - items:
           - enum:
+              - xiaomi,curtana
               - xiaomi,joyeuse
           - const: qcom,sm7125
 
@@ -1035,6 +1000,7 @@ properties:
 
       - items:
           - enum:
+              - qcom,sm8550-hdk
               - qcom,sm8550-mtp
               - qcom,sm8550-qrd
           - const: qcom,sm8550
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5cf5cbef2cf5..fcf7316ecd74 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -37,29 +37,16 @@ properties:
               - anbernic,rg351v
           - const: rockchip,rk3326
 
-      - description: Anbernic RG353P
+      - description: Anbernic RK3566 Handheld Gaming Console
         items:
-          - const: anbernic,rg353p
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353PS
-        items:
-          - const: anbernic,rg353ps
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353V
-        items:
-          - const: anbernic,rg353v
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353VS
-        items:
-          - const: anbernic,rg353vs
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG503
-        items:
-          - const: anbernic,rg503
+          - enum:
+              - anbernic,rg353p
+              - anbernic,rg353ps
+              - anbernic,rg353v
+              - anbernic,rg353vs
+              - anbernic,rg503
+              - anbernic,rg-arc-d
+              - anbernic,rg-arc-s
           - const: rockchip,rk3566
 
       - description: Asus Tinker board
@@ -237,6 +224,13 @@ properties:
               - friendlyarm,nanopi-r5s
           - const: rockchip,rk3568
 
+      - description: FriendlyElec NanoPi R6 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r6c
+              - friendlyarm,nanopi-r6s
+          - const: rockchip,rk3588s
+
       - description: FriendlyElec NanoPC T6
         items:
           - const: friendlyarm,nanopc-t6
@@ -626,9 +620,9 @@ properties:
           - const: openailab,eaidk-610
           - const: rockchip,rk3399
 
-      - description: Orange Pi RK3399 board
+      - description: Xunlong Orange Pi RK3399 board
         items:
-          - const: rockchip,rk3399-orangepi
+          - const: xunlong,rk3399-orangepi
           - const: rockchip,rk3399
 
       - description: Phytec phyCORE-RK3288 Rapid Development Kit
@@ -655,6 +649,14 @@ properties:
           - const: pine64,pinephone-pro
           - const: rockchip,rk3399
 
+      - description: Pine64 PineTab2
+        items:
+          - enum:
+              - pine64,pinetab2-v0.1
+              - pine64,pinetab2-v2.0
+          - const: pine64,pinetab2
+          - const: rockchip,rk3566
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -692,11 +694,17 @@ properties:
       - description: Powkiddy RK3566 Handheld Gaming Console
         items:
           - enum:
+              - powkiddy,rgb10max3
               - powkiddy,rgb30
               - powkiddy,rk2023
               - powkiddy,x55
           - const: rockchip,rk3566
 
+      - description: QNAP TS-433-4G 4-Bay NAS
+        items:
+          - const: qnap,ts433
+          - const: rockchip,rk3568
+
       - description: Radxa Compute Module 3(CM3)
         items:
           - enum:
@@ -878,6 +886,11 @@ properties:
           - const: rockchip,rv1108-evb
           - const: rockchip,rv1108
 
+      - description: Rockchip Toybrick TB-RK3588X board
+        items:
+          - const: rockchip,rk3588-toybrick-x0
+          - const: rockchip,rk3588
+
       - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
         items:
           - const: tsd,px30-ringneck-haikou
@@ -898,6 +911,12 @@ properties:
           - const: tsd,rk3588-jaguar
           - const: rockchip,rk3588
 
+      - description: Theobroma Systems RK3588-Q7 with Haikou baseboard
+        items:
+          - const: tsd,rk3588-tiger-haikou
+          - const: tsd,rk3588-tiger
+          - const: rockchip,rk3588
+
       - description: Tronsmart Orion R68 Meta
         items:
           - const: tronsmart,orion-r68-meta
@@ -940,9 +959,9 @@ properties:
           - const: rockchip,rk3568-evb1-v10
           - const: rockchip,rk3568
 
-      - description: Rockchip RK3568 Banana Pi R2 Pro
+      - description: Sinovoip RK3568 Banana Pi R2 Pro
         items:
-          - const: rockchip,rk3568-bpi-r2pro
+          - const: sinovoip,rk3568-bpi-r2pro
           - const: rockchip,rk3568
 
       - description: Sonoff iHost Smart Home Hub
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
index a9d8e85565b8..09d835db6db5 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -815,6 +815,12 @@ properties:
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: Remix Mini PC
+        items:
+          - const: jide,remix-mini-pc
+          - const: allwinner,sun50i-h64
+          - const: allwinner,sun50i-a64
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk
@@ -835,6 +841,12 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: Sipeed Longan Pi 3H board for the Sipeed Longan Module 3H
+        items:
+          - const: sipeed,longan-pi-3h
+          - const: sipeed,longan-module-3h
+          - const: allwinner,sun50i-h618
+
       - description: SourceParts PopStick v1.1
         items:
           - const: sourceparts,popstick-v1.1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/syna.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/syna.txt
index 851f48ead927..f53c430f648c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/syna.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/syna.txt
@@ -6,18 +6,6 @@ berlin SoCs are now Synaptics' SoCs now.
 
 ---------------------------------------------------------------
 
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
index fcf956406168..8fb4923517d0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -64,6 +64,14 @@ properties:
       - items:
           - const: asus,tf700t
           - const: nvidia,tegra30
+      - description: LG Optimus 4X P880
+        items:
+          - const: lg,p880
+          - const: nvidia,tegra30
+      - description: LG Optimus Vu P895
+        items:
+          - const: lg,p895
+          - const: nvidia,tegra30
       - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
index 0faa403f68c8..ea4fbf655220 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -27,7 +27,7 @@ properties:
       - const: pmc
       - const: wake
       - const: aotag
-      - const: scratch
+      - enum: [ scratch, misc ]
       - const: misc
 
   interrupt-controller: true
@@ -41,25 +41,43 @@ properties:
     description: If present, inverts the PMU interrupt signal.
     $ref: /schemas/types.yaml#/definitions/flag
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: nvidia,tegra186-pmc
-then:
-  properties:
-    reg:
-      maxItems: 4
-
-    reg-names:
-      maxItems: 4
-else:
-  properties:
-    reg:
-      minItems: 5
-
-    reg-names:
-      minItems: 5
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-pmc
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+          contains:
+            const: scratch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra194-pmc
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-pmc
+    then:
+      properties:
+        reg-names:
+          contains:
+            const: misc
 
 patternProperties:
   "^[a-z0-9]+-[a-z0-9]+$":
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
index c6506bccfe88..52b51fd7044e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -87,12 +87,20 @@ properties:
           - const: tq,am642-tqma6442l
           - const: ti,am642
 
+      - description: K3 AM642 SoC SolidRun SoM based boards
+        items:
+          - enum:
+              - solidrun,am642-hummingboard-t
+          - const: solidrun,am642-sr-som
+          - const: ti,am642
+
       - description: K3 AM654 SoC
         items:
           - enum:
               - siemens,iot2050-advanced
               - siemens,iot2050-advanced-m2
               - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-advanced-sm
               - siemens,iot2050-basic
               - siemens,iot2050-basic-pg2
               - ti,am654-evm
@@ -123,6 +131,12 @@ properties:
               - ti,j721s2-evm
           - const: ti,j721s2
 
+      - description: K3 J722S SoC and Boards
+        items:
+          - enum:
+              - ti,j722s-evm
+          - const: ti,j722s
+
       - description: K3 J784s4 SoC
         items:
           - enum:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/ahci-mtk.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/ata/ahci-mtk.txt
deleted file mode 100644
index d2aa696b161b..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/ahci-mtk.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-MediaTek Serial ATA controller
-
-Required properties:
- - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
-		     When using "mediatek,mtk-ahci" compatible strings, you
-		     need SoC specific ones in addition, one of:
-		     - "mediatek,mt7622-ahci"
- - reg		   : Physical base addresses and length of register sets.
- - interrupts	   : Interrupt associated with the SATA device.
- - interrupt-names : Associated name must be: "hostc".
- - clocks	   : A list of phandle and clock specifier pairs, one for each
-		     entry in clock-names.
- - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
- - phys		   : A phandle and PHY specifier pair for the PHY port.
- - phy-names	   : Associated name must be: "sata-phy".
- - ports-implemented : See ./ahci-platform.txt for details.
-
-Optional properties:
- - power-domains   : A phandle and power domain specifier pair to the power
-		     domain which is responsible for collapsing and restoring
-		     power to the peripheral.
- - resets	   : Must contain an entry for each entry in reset-names.
-		     See ../reset/reset.txt for details.
- - reset-names	   : Associated names must be: "axi", "sw", "reg".
- - mediatek,phy-mode : A phandle to the system controller, used to enable
-		       SATA function.
-
-Example:
-
-	sata: sata@1a200000 {
-		compatible = "mediatek,mt7622-ahci",
-			     "mediatek,mtk-ahci";
-		reg = <0 0x1a200000 0 0x1100>;
-		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hostc";
-		clocks = <&pciesys CLK_SATA_AHB_EN>,
-			 <&pciesys CLK_SATA_AXI_EN>,
-			 <&pciesys CLK_SATA_ASIC_EN>,
-			 <&pciesys CLK_SATA_RBC_EN>,
-			 <&pciesys CLK_SATA_PM_EN>;
-		clock-names = "ahb", "axi", "asic", "rbc", "pm";
-		phys = <&u3port1 PHY_TYPE_SATA>;
-		phy-names = "sata-phy";
-		ports-implemented = <0x1>;
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
-			 <&pciesys MT7622_SATA_PHY_SW_RST>,
-			 <&pciesys MT7622_SATA_PHY_REG_RST>;
-		reset-names = "axi", "sw", "reg";
-		mediatek,phy-mode = <&pciesys>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
deleted file mode 100644
index c1d22b3ae134..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Atmel AT91RM9200 CompactFlash
-
-Required properties:
-- compatible : "atmel,at91rm9200-cf".
-- reg : should specify localbus address and size used.
-- gpios : specifies the gpio pins to control the CF device. Detect
-  and reset gpio's are mandatory while irq and vcc gpio's are
-  optional and may be set to 0 if not present.
-
-Example:
-compact-flash@50000000 {
-	compatible = "atmel,at91rm9200-cf";
-	reg = <0x50000000 0x30000000>;
-	gpios = <&pioC 13 0	/* irq */
-		 &pioC 15 0 	/* detect */
-		 0		/* vcc */
-		 &pioC  5 0	/* reset */
-		>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
new file mode 100644
index 000000000000..a34bd2e9c352
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Serial ATA controller
+
+maintainers:
+  - Ryder Lee <ryder.lee@mediatek.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-ahci
+      - const: mediatek,mtk-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: hostc
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: asic
+      - const: rbc
+      - const: pm
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: sw
+      - const: reg
+
+  mediatek,phy-mode:
+    description: System controller phandle, used to enable SATA function
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt7622-power.h>
+    #include <dt-bindings/reset/mt7622-reset.h>
+
+    sata@1a200000 {
+        compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci";
+        reg = <0x1a200000 0x1100>;
+        interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "hostc";
+        clocks = <&pciesys CLK_SATA_AHB_EN>,
+                 <&pciesys CLK_SATA_AXI_EN>,
+                 <&pciesys CLK_SATA_ASIC_EN>,
+                 <&pciesys CLK_SATA_RBC_EN>,
+                 <&pciesys CLK_SATA_PM_EN>;
+        clock-names = "ahb", "axi", "asic", "rbc", "pm";
+        phys = <&u3port1 PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        ports-implemented = <0x1>;
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+        resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+                 <&pciesys MT7622_SATA_PHY_SW_RST>,
+                 <&pciesys MT7622_SATA_PHY_REG_RST>;
+        reset-names = "axi", "sw", "reg";
+        mediatek,phy-mode = <&pciesys>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd032a85..439f7b811a94 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@ additionalProperties: false
 examples:
   - |
     lcd@10008000 {
-            compatible = "arm,versatile-lcd";
-            reg = <0x10008000 0x1000>;
+        compatible = "arm,versatile-lcd";
+        reg = <0x10008000 0x1000>;
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml
new file mode 100644
index 000000000000..328954893c64
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO based LED segment display
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: gpio-7-segment
+
+  segment-gpios:
+    description: |
+      An array of GPIOs one per segment. The first GPIO corresponds to the A
+      segment, the seventh GPIO corresponds to the G segment. Some LED blocks
+      also have a decimal point which can be specified as an optional eighth
+      segment.
+
+               -a-
+              |   |
+              f   b
+              |   |
+               -g-
+              |   |
+              e   c
+              |   |
+               -d-  dp
+
+    minItems: 7
+    maxItems: 8
+
+required:
+  - segment-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+
+    led-7seg {
+        compatible = "gpio-7-segment";
+        segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                        <&gpio 1 GPIO_ACTIVE_LOW>,
+                        <&gpio 2 GPIO_ACTIVE_LOW>,
+                        <&gpio 3 GPIO_ACTIVE_LOW>,
+                        <&gpio 4 GPIO_ACTIVE_LOW>,
+                        <&gpio 5 GPIO_ACTIVE_LOW>,
+                        <&gpio 6 GPIO_ACTIVE_LOW>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index 406a922a714e..3ca0e9863d83 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -84,42 +84,44 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    auxdisplay {
-            compatible = "hit,hd44780";
-
-            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-                         <&hc595 1 GPIO_ACTIVE_HIGH>,
-                         <&hc595 2 GPIO_ACTIVE_HIGH>,
-                         <&hc595 3 GPIO_ACTIVE_HIGH>;
-            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
-            display-height-chars = <2>;
-            display-width-chars = <16>;
+    display-controller {
+        compatible = "hit,hd44780";
+
+        data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                     <&hc595 1 GPIO_ACTIVE_HIGH>,
+                     <&hc595 2 GPIO_ACTIVE_HIGH>,
+                     <&hc595 3 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+        display-height-chars = <2>;
+        display-width-chars = <16>;
     };
+
   - |
     #include <dt-bindings/gpio/gpio.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            pcf8574: pcf8574@27 {
-                    compatible = "nxp,pcf8574";
-                    reg = <0x27>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcf8574: gpio-expander@27 {
+            compatible = "nxp,pcf8574";
+            reg = <0x27>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
     };
-    hd44780 {
-            compatible = "hit,hd44780";
-            display-height-chars = <2>;
-            display-width-chars = <16>;
-            data-gpios = <&pcf8574 4 0>,
-                         <&pcf8574 5 0>,
-                         <&pcf8574 6 0>,
-                         <&pcf8574 7 0>;
-            enable-gpios = <&pcf8574 2 0>;
-            rs-gpios = <&pcf8574 0 0>;
-            rw-gpios = <&pcf8574 1 0>;
-            backlight-gpios = <&pcf8574 3 0>;
+
+    display-controller {
+        compatible = "hit,hd44780";
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+        data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 5 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 6 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 7 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>;
+        rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>;
+        backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>;
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b41..b90eec2077b4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -74,31 +74,31 @@ examples:
     #include <dt-bindings/input/input.h>
     #include <dt-bindings/leds/common.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            ht16k33: ht16k33@70 {
-                    compatible = "holtek,ht16k33";
-                    reg = <0x70>;
-                    refresh-rate-hz = <20>;
-                    interrupt-parent = <&gpio4>;
-                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-                    debounce-delay-ms = <50>;
-                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
-                                   <MATRIX_KEY(3, 0, KEY_F8)>,
-                                   <MATRIX_KEY(4, 0, KEY_F10)>,
-                                   <MATRIX_KEY(5, 0, KEY_F4)>,
-                                   <MATRIX_KEY(6, 0, KEY_F2)>,
-                                   <MATRIX_KEY(2, 1, KEY_F5)>,
-                                   <MATRIX_KEY(3, 1, KEY_F7)>,
-                                   <MATRIX_KEY(4, 1, KEY_F9)>,
-                                   <MATRIX_KEY(5, 1, KEY_F3)>,
-                                   <MATRIX_KEY(6, 1, KEY_F1)>;
-
-                    led {
-                            color = <LED_COLOR_ID_RED>;
-                            function = LED_FUNCTION_BACKLIGHT;
-                            linux,default-trigger = "backlight";
-                    };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@70 {
+            compatible = "holtek,ht16k33";
+            reg = <0x70>;
+            refresh-rate-hz = <20>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+            debounce-delay-ms = <50>;
+            linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                           <MATRIX_KEY(3, 0, KEY_F8)>,
+                           <MATRIX_KEY(4, 0, KEY_F10)>,
+                           <MATRIX_KEY(5, 0, KEY_F4)>,
+                           <MATRIX_KEY(6, 0, KEY_F2)>,
+                           <MATRIX_KEY(2, 1, KEY_F5)>,
+                           <MATRIX_KEY(3, 1, KEY_F7)>,
+                           <MATRIX_KEY(4, 1, KEY_F9)>,
+                           <MATRIX_KEY(5, 1, KEY_F3)>,
+                           <MATRIX_KEY(6, 1, KEY_F1)>;
+
+            led {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_BACKLIGHT;
+                linux,default-trigger = "backlight";
             };
-      };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23de7d1..55e9831b3f67 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@ additionalProperties: false
 examples:
   - |
     lcd: lcd@17fff000 {
-            compatible = "img,boston-lcd";
-            reg = <0x17fff000 0x8>;
+        compatible = "img,boston-lcd";
+        reg = <0x17fff000 0x8>;
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml
new file mode 100644
index 000000000000..20dd9e8c8190
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX6958/6959 7-segment LED display controller
+
+maintainers:
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+description:
+  The Maxim MAX6958/6959 7-segment LED display controller provides
+  an I2C interface to up to four 7-segment LED digits. The MAX6959,
+  in comparison to MAX6958, adds input support. Type of the chip can
+  be autodetected via specific register read, and hence the features
+  may be enabled in the driver at run-time, in case they are requested
+  via Device Tree. A given hardware is simple and does not provide
+  any additional pins, such as reset or power enable.
+
+properties:
+  compatible:
+    const: maxim,max6959
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@38 {
+            compatible = "maxim,max6959";
+            reg = <0x38>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
index 3aaefdbe361e..9017c5a3f3d2 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -18,6 +18,7 @@ properties:
           - const: brcm,gisb-arb
       - items:
           - enum:
+              - brcm,bcm74165-gisb-arb  # for V7 new style 16nm chips
               - brcm,bcm7278-gisb-arb  # for V7 28nm chips
               - brcm,bcm7435-gisb-arb  # for newer 40nm chips
               - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/bus/imx-weim.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/bus/imx-weim.txt
deleted file mode 100644
index e7f502070d77..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-Device tree bindings for i.MX Wireless External Interface Module (WEIM)
-
-The term "wireless" does not imply that the WEIM is literally an interface
-without wires. It simply means that this module was originally designed for
-wireless and mobile applications that use low-power technology.
-
-The actual devices are instantiated from the child nodes of a WEIM node.
-
-Required properties:
-
- - compatible:		Should contain one of the following:
-			  "fsl,imx1-weim"
-			  "fsl,imx27-weim"
-			  "fsl,imx51-weim"
-			  "fsl,imx50-weim"
-			  "fsl,imx6q-weim"
- - reg:			A resource specifier for the register space
-			(see the example below)
- - clocks:		the clock, see the example below.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-Optional properties:
-
- - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, it should be the phandle to the system General
-			Purpose Register controller that contains WEIM CS GPR
-			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
-			should be set up as one of the following 4 possible
-			values depending on the CS space configuration.
-
-			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
-			---------------------------------------------
-				05	    128M     0M     0M     0M
-				033          64M    64M     0M     0M
-				0113         64M    32M    32M     0M
-				01111        32M    32M    32M    32M
-
-			In case that the property is absent, the reset value or
-			what bootloader sets up in IOMUXC_GPR1[11:0] will be
-			used.
-
- - fsl,burst-clk-enable	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, the presence of this property indicates that
-			the weim bus should operate in Burst Clock Mode.
-
- - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
-			Without this option Burst Clock will output clock
-			only when necessary. This takes effect only if
-			"fsl,burst-clk-enable" is set.
-
-Timing property for child nodes. It is mandatory, not optional.
-
- - fsl,weim-cs-timing:	The timing array, contains timing values for the
-			child node. We get the CS indexes from the address
-			ranges in the child node's "reg" property.
-			The number of registers depends on the selected chip:
-			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
-			registers: CSxU, CSxL.
-			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
-			there are three registers: CSCRxU, CSCRxL, CSCRxA.
-			For i.MX50, i.MX53 ("fsl,imx50-weim"),
-			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
-			there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
-			CSxRCR2, CSxWCR1, CSxWCR2.
-
-Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x08000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		nor@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-					0x0000c000 0x1404a38e 0x00000000>;
-		};
-	};
-
-Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
-
-In this case, both chip select 0 and 1 will be configured with the same timing
-array values.
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x02000000
-			  1 0 0x0a000000 0x02000000
-			  2 0 0x0c000000 0x02000000
-			  3 0 0x0e000000 0x02000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		acme@0 {
-			compatible = "acme,whatever";
-			reg = <0 0 0x100>, <0 0x400000 0x800>,
-				<1 0x400000 0x800>;
-			fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
-				0x00000000 0xa0000240 0x00000000>;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
index ca7fdada3ff2..1d2bcea41c85 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
@@ -30,14 +30,16 @@ properties:
       - google,gs101-cmu-top
       - google,gs101-cmu-apm
       - google,gs101-cmu-misc
+      - google,gs101-cmu-peric0
+      - google,gs101-cmu-peric1
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   clock-names:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   "#clock-cells":
     const: 1
@@ -88,6 +90,28 @@ allOf:
             - const: bus
             - const: sss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-peric0
+              - google,gs101-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: Connectivity Peripheral 0/1 bus clock (from CMU_TOP)
+            - description: Connectivity Peripheral 0/1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: ip
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/keystone-gate.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/keystone-gate.txt
index c5aa187026e3..43f6fb6c9392 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/keystone-gate.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/keystone-gate.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for Keystone gate control driver which uses PSC controller IP.
 
 This binding uses the common clock binding[1].
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/keystone-pll.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/keystone-pll.txt
index 9a3fbc665606..69b0eb7c03c9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/keystone-pll.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for keystone PLLs. The main PLL IP typically has a multiplier,
 a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
 and PAPLL are controlled by the memory mapped register where as the Main
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml
new file mode 100644
index 000000000000..9e7c725093aa
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt2701-hifsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek HIFSYS clock and reset controller
+
+description:
+  The MediaTek HIFSYS controller provides various clocks and reset outputs to
+  the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-hifsys
+          - mediatek,mt7622-hifsys
+      - items:
+          - enum:
+              - mediatek,mt7623-hifsys
+          - const: mediatek,mt2701-hifsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt2701-hifsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml
new file mode 100644
index 000000000000..c77111d10f90
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-pciesys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIESYS clock and reset controller
+
+description:
+  The MediaTek PCIESYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-pciesys
+      - mediatek,mt7629-pciesys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a100800 {
+        compatible = "mediatek,mt7622-pciesys";
+        reg = <0x1a100800 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml
new file mode 100644
index 000000000000..da93eccdcfc1
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-ssusbsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SSUSBSYS clock and reset controller
+
+description:
+  The MediaTek SSUSBSYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-ssusbsys
+      - mediatek,mt7629-ssusbsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt7622-ssusbsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
new file mode 100644
index 000000000000..2d4f2cde1e58
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 clock controller
+
+description:
+  The EyeQ5 clock controller handles 10 read-only PLLs derived from the main
+  crystal clock. It also exposes one divider clock, a child of one of the PLLs.
+  Its registers live in a shared region called OLB.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+properties:
+  compatible:
+    const: mobileye,eyeq5-clk
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: plls
+      - const: ospi
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    items:
+      - const: ref
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
index 6c4846b34e4b..a1085ef4fd05 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
@@ -31,10 +31,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
+  power-domains:
+    items:
+      - description: CX domain
+
 required:
   - compatible
   - clocks
   - clock-names
+  - power-domains
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -44,6 +49,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sc8180x";
       reg = <0x00100000 0x1f0000>;
@@ -51,6 +57,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC8180X_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index f369fa34e00c..f57aceddac6b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -53,6 +53,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  vdd-gfx-supply:
+    description: Regulator supply for the VDD_GFX pads
+
   '#clock-cells':
     const: 1
 
@@ -74,6 +77,12 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+# Require that power-domains and vdd-gfx-supply are not both present
+not:
+  required:
+    - power-domains
+    - vdd-gfx-supply
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
index 03fa30fe9253..e0f4d692728c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Q6SSTOP clock Controller
 
 maintainers:
-  - Govind Singh <govinds@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 properties:
   compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
deleted file mode 100644
index 873a2f918bac..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
+++ /dev/null
@@ -1,61 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Modem Clock Controller on SC7180
-
-maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
-
-description: |
-  Qualcomm modem clock control module provides the clocks on SC7180.
-
-  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
-
-properties:
-  compatible:
-    const: qcom,sc7180-mss
-
-  clocks:
-    items:
-      - description: gcc_mss_mfab_axi clock from GCC
-      - description: gcc_mss_nav_axi clock from GCC
-      - description: gcc_mss_cfg_ahb clock from GCC
-
-  clock-names:
-    items:
-      - const: gcc_mss_mfab_axis
-      - const: gcc_mss_nav_axi
-      - const: cfg_ahb
-
-  '#clock-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    clock-controller@41a8000 {
-      compatible = "qcom,sc7180-mss";
-      reg = <0x041a8000 0x8000>;
-      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-               <&gcc GCC_MSS_NAV_AXI_CLK>,
-               <&gcc GCC_MSS_CFG_AHB_CLK>;
-      clock-names = "gcc_mss_mfab_axis",
-                    "gcc_mss_nav_axi",
-                    "cfg_ahb";
-      #clock-cells = <1>;
-    };
-...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index 48986460f994..fa0e5b6b02b8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -17,6 +17,7 @@ description: |
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
     include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+    include/dt-bindings/clock/qcom,x1e80100-camcc.h
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -27,6 +28,7 @@ properties:
       - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
+      - qcom,x1e80100-camcc
 
   clocks:
     items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
index 1a384e8532a5..36974309cf69 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -18,6 +18,7 @@ description: |
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
     include/dt-bindings/reset/qcom,sm8650-gpucc.h
+    include/dt-bindings/reset/qcom,x1e80100-gpucc.h
 
 properties:
   compatible:
@@ -25,6 +26,7 @@ properties:
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
       - qcom,sm8650-gpucc
+      - qcom,x1e80100-gpucc
 
   clocks:
     items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
index c129f8c16b50..bad0260764d4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -14,12 +14,17 @@ description: |
   Qualcomm display clock control module provides the clocks, resets and power
   domains on SM8550.
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8650-dispcc.h
+  - include/dt-bindings/clock/qcom,x1e80100-dispcc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8550-dispcc
+      - qcom,sm8650-dispcc
+      - qcom,x1e80100-dispcc
 
   clocks:
     items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
index af16b05eac96..48fdd562d743 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
@@ -23,6 +23,7 @@ properties:
       - enum:
           - qcom,sm8550-tcsr
           - qcom,sm8650-tcsr
+          - qcom,x1e80100-tcsr
       - const: syscon
 
   clocks:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml
deleted file mode 100644
index 5e0c45c380f5..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml
+++ /dev/null
@@ -1,106 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display Clock & Reset Controller for SM8650
-
-maintainers:
-  - Bjorn Andersson <andersson@kernel.org>
-  - Neil Armstrong <neil.armstrong@linaro.org>
-
-description: |
-  Qualcomm display clock control module provides the clocks, resets and power
-  domains on SM8650.
-
-  See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
-
-properties:
-  compatible:
-    enum:
-      - qcom,sm8650-dispcc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: Board Always On XO source
-      - description: Display's AHB clock
-      - description: sleep clock
-      - description: Byte clock from DSI PHY0
-      - description: Pixel clock from DSI PHY0
-      - description: Byte clock from DSI PHY1
-      - description: Pixel clock from DSI PHY1
-      - description: Link clock from DP PHY0
-      - description: VCO DIV clock from DP PHY0
-      - description: Link clock from DP PHY1
-      - description: VCO DIV clock from DP PHY1
-      - description: Link clock from DP PHY2
-      - description: VCO DIV clock from DP PHY2
-      - description: Link clock from DP PHY3
-      - description: VCO DIV clock from DP PHY3
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  power-domains:
-    description:
-      A phandle and PM domain specifier for the MMCX power domain.
-    maxItems: 1
-
-  required-opps:
-    description:
-      A phandle to an OPP node describing required MMCX performance point.
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-    #include <dt-bindings/power/qcom,rpmhpd.h>
-    clock-controller@af00000 {
-      compatible = "qcom,sm8650-dispcc";
-      reg = <0x0af00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&gcc GCC_DISP_AHB_CLK>,
-               <&sleep_clk>,
-               <&dsi0_phy 0>,
-               <&dsi0_phy 1>,
-               <&dsi1_phy 0>,
-               <&dsi1_phy 1>,
-               <&dp0_phy 0>,
-               <&dp0_phy 1>,
-               <&dp1_phy 0>,
-               <&dp1_phy 1>,
-               <&dp2_phy 0>,
-               <&dp2_phy 1>,
-               <&dp3_phy 0>,
-               <&dp3_phy 1>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      power-domains = <&rpmhpd RPMHPD_MMCX>;
-      required-opps = <&rpmhpd_opp_low_svs>;
-    };
-...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index 9c3dc6c4fa94..084259d30232 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -50,6 +50,7 @@ properties:
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
       - renesas,r8a779f0-cpg-mssr # R-Car S4-8
       - renesas,r8a779g0-cpg-mssr # R-Car V4H
+      - renesas,r8a779h0-cpg-mssr # R-Car V4M
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
index c752c8985a53..cdc5ded59fe5 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -36,6 +36,8 @@ properties:
       - samsung,exynos850-cmu-aud
       - samsung,exynos850-cmu-cmgp
       - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-cpucl0
+      - samsung,exynos850-cmu-cpucl1
       - samsung,exynos850-cmu-dpu
       - samsung,exynos850-cmu-g3d
       - samsung,exynos850-cmu-hsi
@@ -152,6 +154,46 @@ allOf:
             - const: dout_core_mmc_embd
             - const: dout_core_sss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cpucl0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL0 switch clock (from CMU_TOP)
+            - description: CPUCL0 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl0_switch
+            - const: dout_cpucl0_dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cpucl1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL1 switch clock (from CMU_TOP)
+            - description: CPUCL1 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl1_switch
+            - const: dout_cpucl1_dbg
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
index dc808e2f8327..b370a10a23a6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 description: |
   FSD clock controller consist of several clock management unit
-  (CMU), which generates clocks for various inteernal SoC blocks.
+  (CMU), which generates clocks for various internal SoC blocks.
   The root clock comes from external OSC clock (24 MHz).
 
   All available clocks are defined as preprocessor macros in
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/adpll.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/adpll.txt
index 4c8a2ce2cd70..3122360adcf3 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/adpll.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/adpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments ADPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped ADPLL with two to three selectable input clocks
 and three to four children.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/apll.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/apll.txt
index ade4dd4c30f0..bbd505c1199d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/apll.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments APLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped APLL with usually two selectable input clocks
 (reference clock and bypass clock), with analog phase locked
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/autoidle.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/autoidle.txt
index 7c735dde9fe9..05645a10a9e3 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/autoidle.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments autoidle clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a register mapped
 clock which can be put to idle automatically by hardware based on the usage
 and a configuration bit setting. Autoidle clock is never an individual
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/clockdomain.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index 9c6199249ce5..edf0b5d42768 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments clockdomain.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1] in consumer role.
 Every clock on TI SoC belongs to one clockdomain, but software
 only needs this information for specific clocks which require
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/composite.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/composite.txt
index 33ac7c9ad053..6f7e1331b546 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -1,7 +1,5 @@
 Binding for TI composite clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped composite clock with multiple different sub-types;
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/divider.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/divider.txt
index 9b13b32974f9..4d7c76f0b356 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/divider.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -1,7 +1,5 @@
 Binding for TI divider clock
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped adjustable clock rate divider that does not gate and has
 only one input clock or parent.  By default the value programmed into
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/dpll.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/dpll.txt
index 37a7cb6ad07d..14a1b72c2e71 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments DPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped DPLL with usually two selectable input clocks
 (reference clock and bypass clock), with digital phase locked
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/fapll.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/fapll.txt
index c19b3f253b8c..88986ef39ddd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/fapll.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/fapll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments FAPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped FAPLL with usually two selectable input clocks
 (reference clock and bypass clock), and one or more child
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
index 518e3c142276..dc69477b6e98 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -1,7 +1,5 @@
 Binding for TI fixed factor rate clock sources.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1], and also uses the autoidle
 support from TI autoidle clock [2].
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/gate.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/gate.txt
index 4982615c01b9..a8e0335b006a 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments gate clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features. If no register
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/interface.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/interface.txt
index d3eb5ca92a7f..85fb1f2d2d28 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments interface clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features, including
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/mux.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/mux.txt
index b33f641f1043..cd56d3c1c09f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -1,7 +1,5 @@
 Binding for TI mux clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped multiplexer with multiple input clock signals or
 parents, one of which can be selected as output.  This clock does not
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
index 0b7383b3106b..7dc0748444fd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-aes
+    oneOf:
+      - const: atmel,at91sam9g46-aes
+      - items:
+          - const: microchip,sam9x7-aes
+          - const: atmel,at91sam9g46-aes
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
index ee2ffb034325..d378c53314dd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-sha
+    oneOf:
+      - const: atmel,at91sam9g46-sha
+      - items:
+          - const: microchip,sam9x7-sha
+          - const: atmel,at91sam9g46-sha
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
index 3d6ed24b1b00..6a441f79efea 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-tdes
+    oneOf:
+      - const: atmel,at91sam9g46-tdes
+      - items:
+          - const: microchip,sam9x7-tdes
+          - const: atmel,at91sam9g46-tdes
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index 09e43157cc71..e91bc7dc6ad3 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - qcom,sa8775p-inline-crypto-engine
+          - qcom,sc7180-inline-crypto-engine
           - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
           - qcom,sm8650-inline-crypto-engine
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
index a48bd381063a..e285e382d4ec 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -45,6 +45,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-qce
+              - qcom,sm6350-qce
               - qcom,sm8250-qce
               - qcom,sm8350-qce
               - qcom,sm8450-qce
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 000000000000..29ed42485de3
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 923aea25344c..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph representation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
new file mode 100644
index 000000000000..3791c9f4ebab
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMI transmitter is a Synopsys DesignWare
+  HDMI 2.0a TX controller IP.
+
+allOf:
+  - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-tx
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iahb
+      - const: isfr
+      - const: cec
+      - const: pix
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi-tx";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+        ports {
+           #address-cells = <1>;
+           #size-cells = <0>;
+           port@0 {
+             reg = <0>;
+
+             hdmi_tx_from_pvi: endpoint {
+               remote-endpoint = <&pvi_to_hdmi_tx>;
+             };
+          };
+
+          port@1 {
+            reg = <1>;
+              hdmi_tx_out: endpoint {
+                remote-endpoint = <&hdmi0_con>;
+              };
+          };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index 6ec6d287bff4..c93878b6d718 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SN65DSI86 DSI to eDP bridge chip
 
 maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
 
 description: |
   The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/fsl,lcdif.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 1c2be8d6f633..0681fc49aa1b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -120,13 +120,19 @@ allOf:
           maxItems: 1
         clock-names:
           maxItems: 1
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx6sx-lcdif
+    then:
+      required:
+        - power-domains
   - if:
       properties:
         compatible:
           contains:
             enum:
               - fsl,imx6sl-lcdif
-              - fsl,imx6sx-lcdif
               - fsl,imx8mm-lcdif
               - fsl,imx8mn-lcdif
               - fsl,imx8mp-lcdif
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 000000000000..56da1636014c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The HDMI parallel video interface is a timing and sync generator block in the
+  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pvi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from the LCDIF controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the HDMI TX controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    display-bridge@32fc4000 {
+        compatible = "fsl,imx8mp-hdmi-pvi";
+        reg = <0x32fc4000 0x44>;
+        interrupt-parent = <&irqsteer_hdmi>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                pvi_from_lcdif3: endpoint {
+                    remote-endpoint = <&lcdif3_to_pvi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                pvi_to_hdmi_tx: endpoint {
+                    remote-endpoint = <&hdmi_tx_from_pvi>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 4219936eda5a..1fa28e976559 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -19,6 +19,7 @@ properties:
               - qcom,msm8916-dsi-ctrl
               - qcom,msm8953-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
@@ -248,6 +249,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8953-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
     then:
       properties:
         clocks:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 4e1c25b42908..b3837368a260 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -224,6 +224,7 @@ allOf:
             enum:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
+              - qcom,adreno-gmu-750.1
     then:
       properties:
         reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/gpu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 592a57835875..7d4463873262 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -23,7 +23,7 @@ properties:
           The driver is parsing the compat string for Adreno to
           figure out the gpu-id and patch level.
         items:
-          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$'
+          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Imageon to
@@ -127,7 +127,7 @@ allOf:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$'
 
     then:
       properties:
@@ -203,7 +203,7 @@ allOf:
         properties:
           compatible:
             contains:
-              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$'
+              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
 
       then: # Starting with A6xx, the clocks are usually defined in the GMU node
         properties:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 0999ea07f47b..e4576546bf0d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
index c0d6a4fdff97..e6dc5494baee 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -53,6 +53,15 @@ patternProperties:
       compatible:
         const: qcom,sm8150-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8150-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
index a01d15a03317..c4087cc5abbd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sm8650-dpu
+    enum:
+      - qcom,sm8650-dpu
+      - qcom,x1e80100-dpu
 
   reg:
     items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
index bd11119dc93d..24cece1e888b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
@@ -37,18 +37,21 @@ properties:
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dpu
 
   "^displayport-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dp
 
   "^dsi@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         items:
@@ -57,6 +60,7 @@ patternProperties:
 
   "^phy@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dsi-phy-4nm
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml
new file mode 100644
index 000000000000..3b01a0e47333
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,x1e80100-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,x1e80100-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,x1e80100-dp";
+            reg = <0 0xae90000 0 0x200>,
+                  <0 0xae90200 0 0x200>,
+                  <0 0xae90400 0 0x600>,
+                  <0 0xae91000 0 0x400>,
+                  <0 0xae91400 0 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+               <&dispcc_dptx0_aux_clk>,
+               <&dispcc_dptx0_link_clk>,
+               <&dispcc_dptx0_link_intf_clk>,
+               <&dispcc_dptx0_pixel0_clk>;
+            clock-names = "core_iface", "core_aux",
+                    "ctrl_link",
+                    "ctrl_link_iface",
+                    "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                  <&dispcc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                  <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            operating-points-v2 = <&mdss_dp0_opp_table>;
+
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                  reg = <0>;
+
+                  mdss_dp0_in: endpoint {
+                    remote-endpoint = <&mdss_intf0_out>;
+                  };
+              };
+
+              port@1 {
+                  reg = <1>;
+
+                  mdss_dp0_out: endpoint {
+                  };
+              };
+            };
+
+            mdss_dp0_opp_table: opp-table {
+              compatible = "operating-points-v2";
+
+              opp-160000000 {
+                 opp-hz = /bits/ 64 <160000000>;
+                 required-opps = <&rpmhpd_opp_low_svs>;
+              };
+
+              opp-270000000 {
+                 opp-hz = /bits/ 64 <270000000>;
+                 required-opps = <&rpmhpd_opp_svs>;
+              };
+
+              opp-540000000 {
+                 opp-hz = /bits/ 64 <540000000>;
+                 required-opps = <&rpmhpd_opp_svs_l1>;
+              };
+
+              opp-810000000 {
+                 opp-hz = /bits/ 64 <810000000>;
+                 required-opps = <&rpmhpd_opp_nom>;
+              };
+            };
+        };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 000000000000..32df26cbfeed
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+
+  reg: true
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml
new file mode 100644
index 000000000000..174661d13811
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112A-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  The Himax HX83112A is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,9a-3r063-1102b
+
+  vdd1-supply:
+    description: Digital voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+  reg: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd1-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,9a-3r063-1102b";
+            reg = <0>;
+
+            backlight = <&pm6150l_wled>;
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            vdd1-supply = <&vreg_l1e>;
+            vsn-supply = <&pm6150l_lcdb_ncp>;
+            vsp-supply = <&pm6150l_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index c5944b4d636c..d589f1677214 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: leadtek,ltk500hd1829
+    enum:
+      - leadtek,ltk101b4029w
+      - leadtek,ltk500hd1829
   reg: true
   backlight: true
   reset-gpios: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
index bc92928c805b..91921f4b0e5f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -15,7 +15,9 @@ allOf:
 properties:
   compatible:
     items:
-      - const: hydis,hva40wv1
+      - enum:
+          - frida,frd400b25025
+          - hydis,hva40wv1
       - const: novatek,nt35510
     description: This indicates the panel manufacturer of the panel
       that is in turn using the NT35510 panel driver. The compatible
@@ -29,6 +31,7 @@ properties:
   vddi-supply:
     description: regulator that supplies the vddi voltage
   backlight: true
+  port: true
 
 required:
   - compatible
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml
new file mode 100644
index 000000000000..dc4672f3d01d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672E LCD DSI Panel
+
+maintainers:
+  - Ritesh Kumar <quic_riteshk@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt36672e
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply: true
+  avdd-supply: true
+  avee-supply: true
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "novatek,nt36672e";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+            vddi-supply = <&vreg_l8c_1p8>;
+            avdd-supply = <&disp_avdd>;
+            avee-supply = <&disp_avee>;
+
+            backlight = <&pwm_backlight>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
index 9f1016551e0b..155d8ffa8f6e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -39,9 +39,13 @@ properties:
   compatible:
     items:
       - enum:
+          # Admatec 9904379 10.1" 1024x600 LVDS panel
+          - admatec,9904379
           - auo,b101ew05
           # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
           - chunghwa,claa070wp03xg
+          # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel
+          - edt,etml0700z9ndha
           # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
           - hannstar,hsd101pww2
           # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 634a10c6f2dd..a95445f40870 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -73,6 +73,8 @@ properties:
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel
+      - boe,bp082wx1-100
         # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
       - boe,bp101wx1-100
         # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
@@ -141,6 +143,8 @@ properties:
       - edt,etm0700g0edh6
         # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
       - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch
+      - edt,etml1010g3dra
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
index 97cccd8a8479..6ec471284f97 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -22,6 +22,8 @@ properties:
     enum:
       # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
       - anbernic,rg353v-panel-v2
+      # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
+      - powkiddy,rgb10max3-panel
       # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
       - powkiddy,rgb30-panel
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
@@ -43,6 +45,7 @@ properties:
   reset-gpios: true
 
   backlight: true
+  rotation: true
 
 required:
   - compatible
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
index 6ba323683921..187840bb76c7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
index fa745a6f4456..772399067515 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Visionox model RM69299 Panels
 
 maintainers:
-  - Harigovindan P <harigovi@codeaurora.org>
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
 
 description: |
   This binding is for display panels using a Visionox RM692999 panel.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 000000000000..08e5b9478051
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+  and RZ/V2L SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-du # RZ/G2{L,LC}
+      - items:
+          - enum:
+              - renesas,r9a07g054-du    # RZ/V2L
+          - const: renesas,r9a07g044-du # RZ/G2L fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings. The number of ports and their assignment are
+      model-dependent. Each port shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  renesas,vsps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - ports
+  - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # RZ/G2L DU
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@10890000 {
+        compatible = "renesas,r9a07g044-du";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+        clock-names = "aclk", "pclk", "vclk";
+        resets = <&cpg R9A07G044_LCDC_RESET_N>;
+        power-domains = <&cpg>;
+
+        renesas,vsps = <&vspd0 0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 7e59dee15a5f..af638b6c0d21 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -94,11 +94,14 @@ properties:
       - const: default
       - const: unwedge
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    patternProperties:
-      "^port(@0)?$":
+    properties:
+      port@0:
         $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
         properties:
@@ -108,11 +111,14 @@ properties:
             description: Connection to the VOPB
           endpoint@1:
             description: Connection to the VOPL
-    properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: Output of the DWC HDMI TX
 
+    required:
+      - port@0
+      - port@1
+
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -135,19 +141,25 @@ examples:
     #include <dt-bindings/clock/rk3288-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
 
     hdmi: hdmi@ff980000 {
         compatible = "rockchip,rk3288-dw-hdmi";
         reg = <0xff980000 0x20000>;
         reg-io-width = <4>;
-        ddc-i2c-bus = <&i2c5>;
-        rockchip,grf = <&grf>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
         clock-names = "iahb", "isfr";
+        ddc-i2c-bus = <&i2c5>;
+        power-domains = <&power RK3288_PD_VIO>;
+        rockchip,grf = <&grf>;
 
         ports {
-            port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
                 #address-cells = <1>;
                 #size-cells = <0>;
 
@@ -155,11 +167,20 @@ examples:
                     reg = <0>;
                     remote-endpoint = <&vopb_out_hdmi>;
                 };
+
                 hdmi_in_vopl: endpoint@1 {
                     reg = <1>;
                     remote-endpoint = <&vopl_out_hdmi>;
                 };
             };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
         };
     };
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index 3afbb52d1b7f..153ff86fb405 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -131,9 +131,9 @@ allOf:
             const: sinowealth,sh1106
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -149,9 +149,9 @@ allOf:
               - solomon,ssd1305
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -167,9 +167,9 @@ allOf:
               - solomon,ssd1306
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -185,9 +185,9 @@ allOf:
               - solomon,ssd1307
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 39
         solomon,dclk-div:
           default: 2
@@ -205,9 +205,9 @@ allOf:
               - solomon,ssd1309
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
index 37975ee61c5a..dd7939989cf4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
@@ -30,9 +30,9 @@ allOf:
             const: solomon,ssd1322
     then:
       properties:
-        width:
+        solomon,width:
           default: 480
-        height:
+        solomon,height:
           default: 128
 
   - if:
@@ -42,9 +42,9 @@ allOf:
             const: solomon,ssd1325
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 80
 
   - if:
@@ -54,9 +54,9 @@ allOf:
             const: solomon,ssd1327
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 128
 
 unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml
new file mode 100644
index 000000000000..b7780038a34b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD133x OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1331
+
+  solomon,width:
+    default: 96
+
+  solomon,height:
+    default: 64
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        oled@0 {
+            compatible = "solomon,ssd1331";
+            reg = <0x0>;
+            reset-gpios = <&gpio2 7>;
+            dc-gpios = <&gpio2 8>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index b6767ef0d24d..55e3e490d0e6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -37,6 +37,7 @@ properties:
       - description: OVR2 overlay manager for vp2
       - description: VP1 video port 1
       - description: VP2 video port 2
+      - description: common1 DSS register area
 
   reg-names:
     items:
@@ -47,6 +48,7 @@ properties:
       - const: ovr2
       - const: vp1
       - const: vp2
+      - const: common1
 
   clocks:
     items:
@@ -147,9 +149,10 @@ examples:
                     <0x04a07000 0x1000>, /* ovr1 */
                     <0x04a08000 0x1000>, /* ovr2 */
                     <0x04a0a000 0x1000>, /* vp1 */
-                    <0x04a0b000 0x1000>; /* vp2 */
+                    <0x04a0b000 0x1000>, /* vp2 */
+                    <0x04a01000 0x1000>; /* common1 */
             reg-names = "common", "vidl1", "vid",
-                    "ovr1", "ovr2", "vp1", "vp2";
+                    "ovr1", "ovr2", "vp1", "vp2", "common1";
             ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
             power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
             clocks =        <&k3_clks 67 1>,
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index ec2d7a789ffe..0f2501f72cca 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -28,6 +28,9 @@ properties:
       - items:
           - const: allwinner,sun8i-r40-dma
           - const: allwinner,sun50i-a64-dma
+      - items:
+          - const: allwinner,sun50i-h616-dma
+          - const: allwinner,sun50i-a100-dma
 
   reg:
     maxItems: 1
@@ -59,10 +62,11 @@ required:
 if:
   properties:
     compatible:
-      enum:
-        - allwinner,sun20i-d1-dma
-        - allwinner,sun50i-a100-dma
-        - allwinner,sun50i-h6-dma
+      contains:
+        enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
 
 then:
   properties:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 437db0c62339..aa51d278cb67 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -25,6 +25,7 @@ properties:
           - fsl,imx8qm-edma
           - fsl,imx93-edma3
           - fsl,imx93-edma4
+          - fsl,imx95-edma5
       - items:
           - const: fsl,ls1028a-edma
           - const: fsl,vf610-edma
@@ -83,6 +84,7 @@ allOf:
               - fsl,imx8qm-edma
               - fsl,imx93-edma3
               - fsl,imx93-edma4
+              - fsl,imx95-edma5
     then:
       properties:
         "#dma-cells":
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
index 63c302d5eb3d..23c23bcfc796 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -92,7 +92,8 @@ properties:
               description: needs firmware more than ver 2
           - Shared ASRC: 23
           - SAI: 24
-          - HDMI Audio: 25
+          - Multi SAI: 25
+          - HDMI Audio: 26
 
        The third cell: transfer priority ID
          enum:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
new file mode 100644
index 000000000000..d447d5207be0
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP DMA controller
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description:
+  Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pdma-1.0
+      - marvell,adma-1.0
+      - marvell,pxa910-squ
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for the controller, may be shared or one per DMA channel
+    minItems: 1
+
+  asram:
+    description:
+      A phandle to the SRAM pool
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#dma-channels':
+    deprecated: true
+
+  '#dma-requests':
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#dma-cells'
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,pdma-1.0
+    then:
+      properties:
+        asram: false
+    else:
+      required:
+        - asram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@d4000000 {
+        compatible = "marvell,pdma-1.0";
+        reg = <0xd4000000 0x10000>;
+        interrupts = <47>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml
new file mode 100644
index 000000000000..3f1e120e40a3
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,mt7622-hsdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High-Speed DMA Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-hsdma
+      - mediatek,mt7623-hsdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hsdma
+
+  power-domains:
+    maxItems: 1
+
+  "#dma-cells":
+    description: Channel number
+    const: 1
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    dma-controller@1b007000 {
+        compatible = "mediatek,mt7623-hsdma";
+        reg = <0x1b007000 0x1000>;
+        interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+        clock-names = "hsdma";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+        #dma-cells = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/mmp-dma.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/mmp-dma.txt
deleted file mode 100644
index ec18bf0a802a..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MARVELL MMP DMA controller
-
-Marvell Peripheral DMA Controller
-Used platforms: pxa688, pxa910, pxa3xx, etc
-
-Required properties:
-- compatible: Should be "marvell,pdma-1.0"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for pdma device
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller (defaults
-  to 32 when not specified)
-- #dma-channels: deprecated
-- dma-requests: Number of DMA requestor lines supported by the controller
-  (defaults to 32 when not specified)
-- #dma-requests: deprecated
-
-"marvell,pdma-1.0"
-Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-
-Examples:
-
-/*
- * Each channel has specific irq
- * ICU parse out irq channel from ICU register,
- * while DMA controller may not able to distinguish the irq channel
- * Using this method, interrupt-parent is required as demuxer
- * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
- * 18~21 is ADMA irq
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-	      interrupt-parent = <&intcmux32>;
-	      dma-channels = <16>;
-      };
-
-/*
- * One irq for all channels
- * Dmaengine driver (DMA controller) distinguish irq channel via
- * parsing internal register
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <47>;
-	      dma-channels = <16>;
-      };
-
-
-Marvell Two Channel DMA Controller used specifically for audio
-Used platforms: pxa688, pxa910
-
-Required properties:
-- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for dma device
-
-"marvell,adma-1.0" used on pxa688
-"marvell,pxa910-squ" used on pxa910
-
-Examples:
-
-/* each channel has specific irq */
-adma0: dma-controller@d42a0800 {
-	      compatible = "marvell,adma-1.0";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <18 19>;
-	      interrupt-parent = <&intcmux32>;
-      };
-
-/* One irq for all channels */
-squ: dma-controller@d42a0800 {
-	      compatible = "marvell,pxa910-squ";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <46>;
-      };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/mtk-hsdma.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
deleted file mode 100644
index 4bb317359dc6..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-MediaTek High-Speed DMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:	Must be one of
-		  "mediatek,mt7622-hsdma": for MT7622 SoC
-		  "mediatek,mt7623-hsdma": for MT7623 SoC
-- reg:		Should contain the register's base address and length.
-- interrupts:	Should contain a reference to the interrupt used by this
-		device.
-- clocks:	Should be the clock specifiers corresponding to the entry in
-		clock-names property.
-- clock-names:	Should contain "hsdma" entries.
-- power-domains: Phandle to the power domain that the device is part of
-- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
-		in dmas property of a client device represents the channel
-		number.
-Example:
-
-        hsdma: dma-controller@1b007000 {
-		compatible = "mediatek,mt7623-hsdma";
-		reg = <0 0x1b007000 0 0x1000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
-		clock-names = "hsdma";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		#dma-cells = <1>;
-	};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
index 03aa067b1229..04fc4a99a7cb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -46,6 +46,7 @@ properties:
               - renesas,dmac-r8a779a0     # R-Car V3U
               - renesas,dmac-r8a779f0     # R-Car S4-8
               - renesas,dmac-r8a779g0     # R-Car V4H
+              - renesas,dmac-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-dmac # R-Car Gen4
 
   reg: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/dts-coding-style.rst linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dts-coding-style.rst
index a9bdd2b59dca..8a68331075a0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/dts-coding-style.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/dts-coding-style.rst
@@ -144,6 +144,8 @@ Example::
 		#dma-cells = <1>;
 		clocks = <&clock_controller 0>, <&clock_controller 1>;
 		clock-names = "bus", "host";
+		#address-cells = <1>;
+		#size-cells = <1>;
 		vendor,custom-property = <2>;
 		status = "disabled";
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
index 1812ef31d5f1..3c36cd0510de 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -68,14 +68,10 @@ properties:
                   pattern: cs16$
               - items:
                   pattern: c32$
-              - items:
-                  pattern: c32d-wl$
               - items:
                   pattern: cs32$
               - items:
                   pattern: c64$
-              - items:
-                  pattern: c64d-wl$
               - items:
                   pattern: cs64$
               - items:
@@ -136,6 +132,7 @@ properties:
               - renesas,r1ex24128
               - samsung,s524ad0xd1
           - const: atmel,24c128
+      - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st
 
   label:
     description: Descriptive name of the EEPROM.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 8e584857ddd4..ab8f32c440df 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -26,6 +26,12 @@ properties:
       - description: For implementations complying for Versal.
         const: xlnx,versal-firmware
 
+      - description: For implementations complying for Versal NET.
+        items:
+          - enum:
+              - xlnx,versal-net-firmware
+          - const: xlnx,versal-firmware
+
   method:
     description: |
                  The method of calling the PM-API firmware layer.
@@ -41,7 +47,53 @@ properties:
   "#power-domain-cells":
     const: 1
 
-  versal_fpga:
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+  gpio:
+    $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+    description: The gpio node describes connect to PS_MODE pins via firmware
+      interface.
+    type: object
+
+  soc-nvmem:
+    $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+    description: The ZynqMP MPSoC provides access to the hardware related data
+      like SOC revision, IDCODE and specific purpose efuses.
+    type: object
+
+  pcap:
+    $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
+    description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+      configure the Programmable Logic (PL). The configuration uses the
+      firmware interface.
+    type: object
+
+  pinctrl:
+    $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+    description: The pinctrl node provides access to pinconfig and pincontrol
+      functionality available in firmware.
+    type: object
+
+  power-management:
+    $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml#
+    description: The zynqmp-power node describes the power management
+      configurations. It will control remote suspend/shutdown interfaces.
+    type: object
+
+  reset-controller:
+    $ref: /schemas/reset/xlnx,zynqmp-reset.yaml#
+    description: The reset-controller node describes connection to the reset
+      functionality via firmware interface.
+    type: object
+
+  versal-fpga:
     $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
     description: Compatible of the FPGA device.
     type: object
@@ -53,15 +105,6 @@ properties:
       vector.
     type: object
 
-  clock-controller:
-    $ref: /schemas/clock/xlnx,versal-clk.yaml#
-    description: The clock controller is a hardware block of Xilinx versal
-      clock tree. It reads required input clock frequencies from the devicetree
-      and acts as clock provider for all clock consumers of PS clocks.list of
-      clock specifiers which are external input clocks to the given clock
-      controller.
-    type: object
-
 required:
   - compatible
 
@@ -73,7 +116,38 @@ examples:
     firmware {
       zynqmp_firmware: zynqmp-firmware {
         #power-domain-cells = <1>;
+        soc-nvmem {
+          compatible = "xlnx,zynqmp-nvmem-fw";
+          nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+          };
+        };
+        gpio {
+          compatible = "xlnx,zynqmp-gpio-modepin";
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+        pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
         };
+        pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+        };
+        power-management {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+        reset-controller {
+          compatible = "xlnx,zynqmp-reset";
+          #reset-cells = <1>;
+        };
+      };
     };
 
     sata {
@@ -84,7 +158,7 @@ examples:
       compatible = "xlnx,versal-firmware";
       method = "smc";
 
-      versal_fpga: versal_fpga {
+      versal_fpga: versal-fpga {
         compatible = "xlnx,versal-fpga";
       };
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/fpga-region.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/fpga/fpga-region.txt
deleted file mode 100644
index 528df8a0e6d8..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ /dev/null
@@ -1,479 +0,0 @@
-FPGA Region Device Tree Binding
-
-Alan Tull 2016
-
- CONTENTS
- - Introduction
- - Terminology
- - Sequence
- - FPGA Region
- - Supported Use Models
- - Device Tree Examples
- - Constraints
-
-
-Introduction
-============
-
-FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
-the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
-control.
-
-This device tree binding document hits some of the high points of FPGA usage and
-attempts to include terminology used by both major FPGA manufacturers.  This
-document isn't a replacement for any manufacturers specifications for FPGA
-usage.
-
-
-Terminology
-===========
-
-Full Reconfiguration
- * The entire FPGA is programmed.
-
-Partial Reconfiguration (PR)
- * A section of an FPGA is reprogrammed while the rest of the FPGA is not
-   affected.
- * Not all FPGA's support PR.
-
-Partial Reconfiguration Region (PRR)
- * Also called a "reconfigurable partition"
- * A PRR is a specific section of an FPGA reserved for reconfiguration.
- * A base (or static) FPGA image may create a set of PRR's that later may
-   be independently reprogrammed many times.
- * The size and specific location of each PRR is fixed.
- * The connections at the edge of each PRR are fixed.  The image that is loaded
-   into a PRR must fit and must use a subset of the region's connections.
- * The busses within the FPGA are split such that each region gets its own
-   branch that may be gated independently.
-
-Persona
- * Also called a "partial bit stream"
- * An FPGA image that is designed to be loaded into a PRR.  There may be
-   any number of personas designed to fit into a PRR, but only one at at time
-   may be loaded.
- * A persona may create more regions.
-
-FPGA Bridge
- * FPGA Bridges gate bus signals between a host and FPGA.
- * FPGA Bridges should be disabled while the FPGA is being programmed to
-   prevent spurious signals on the cpu bus and to the soft logic.
- * FPGA bridges may be actual hardware or soft logic on an FPGA.
- * During Full Reconfiguration, hardware bridges between the host and FPGA
-   will be disabled.
- * During Partial Reconfiguration of a specific region, that region's bridge
-   will be used to gate the busses.  Traffic to other regions is not affected.
- * In some implementations, the FPGA Manager transparently handles gating the
-   buses, eliminating the need to show the hardware FPGA bridges in the
-   device tree.
- * An FPGA image may create a set of reprogrammable regions, each having its
-   own bridge and its own split of the busses in the FPGA.
-
-FPGA Manager
- * An FPGA Manager is a hardware block that programs an FPGA under the control
-   of a host processor.
-
-Base Image
- * Also called the "static image"
- * An FPGA image that is designed to do full reconfiguration of the FPGA.
- * A base image may set up a set of partial reconfiguration regions that may
-   later be reprogrammed.
-
-    ----------------       ----------------------------------
-    |  Host CPU    |       |             FPGA               |
-    |              |       |                                |
-    |          ----|       |       -----------    --------  |
-    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
-    |          | W |       |   |   -----------    --------  |
-    |          |   |       |   |                            |
-    |          | B |<=====>|<==|   -----------    --------  |
-    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
-    |          | I |       |   |   -----------    --------  |
-    |          | D |       |   |                            |
-    |          | G |       |   |   -----------    --------  |
-    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
-    |          ----|       |       -----------    --------  |
-    |              |       |                                |
-    ----------------       ----------------------------------
-
-Figure 1: An FPGA set up with a base image that created three regions.  Each
-region (PRR0-2) gets its own split of the busses that is independently gated by
-a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
-reprogrammed independently while the rest of the system continues to function.
-
-
-Sequence
-========
-
-When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
-do the following:
-
- 1. Disable appropriate FPGA bridges.
- 2. Program the FPGA using the FPGA manager.
- 3. Enable the FPGA bridges.
- 4. The Device Tree overlay is accepted into the live tree.
- 5. Child devices are populated.
-
-When the overlay is removed, the child nodes will be removed and the FPGA Region
-will disable the bridges.
-
-
-FPGA Region
-===========
-
-FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
-Region brings together the elements needed to program on a running system and
-add the child devices:
-
- * FPGA Manager
- * FPGA Bridges
- * image-specific information needed to to the programming.
- * child nodes
-
-The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
-FPGA while an operating system is running.
-
-An FPGA Region that exists in the live Device Tree reflects the current state.
-If the live tree shows a "firmware-name" property or child nodes under an FPGA
-Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
-and adds the "firmware-name" property is taken as a request to reprogram the
-FPGA.  After reprogramming is successful, the overlay is accepted into the live
-tree.
-
-The base FPGA Region in the device tree represents the FPGA and supports full
-reconfiguration.  It must include a phandle to an FPGA Manager.  The base
-FPGA region will be the child of one of the hardware bridges (the bridge that
-allows register access) between the cpu and the FPGA.  If there are more than
-one bridge to control during FPGA programming, the region will also contain a
-list of phandles to the additional hardware FPGA Bridges.
-
-For partial reconfiguration (PR), each PR region will have an FPGA Region.
-These FPGA regions are children of FPGA bridges which are then children of the
-base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
-this.
-
-If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
-Manager specified by its ancestor FPGA Region.  This supports both the case
-where the same FPGA Manager is used for all of an FPGA as well the case where
-a different FPGA Manager is used for each region.
-
-FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
-shutting down bridges that are upstream from the other active regions while one
-region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
-hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
-within the static image of the FPGA.
-
-Required properties:
-- compatible : should contain "fpga-region"
-- fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
-	inherit this property from their ancestor regions.  An fpga-mgr property
-	in a region will override any inherited FPGA manager.
-- #address-cells, #size-cells, ranges : must be present to handle address space
-	mapping for child nodes.
-
-Optional properties:
-- firmware-name : should contain the name of an FPGA image file located on the
-	firmware search path.  If this property shows up in a live device tree
-	it indicates that the FPGA has already been programmed with this image.
-	If this property is in an overlay targeting an FPGA region, it is a
-	request to program the FPGA with that image.
-- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
-	controlled during FPGA programming along with the parent FPGA bridge.
-	This property is optional if the FPGA Manager handles the bridges.
-        If the fpga-region is  the child of an fpga-bridge, the list should not
-        contain the parent bridge.
-- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
-	otherwise full reconfiguration is done.
-- external-fpga-config : boolean, set if the FPGA has already been configured
-	prior to OS boot up.
-- encrypted-fpga-config : boolean, set if the bitstream is encrypted
-- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become enabled after the region has been
-	programmed.
-- region-freeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become disabled before the region has been
-	programmed.
-- config-complete-timeout-us : The maximum time in microseconds time for the
-	FPGA to go to operating mode after the region has been programmed.
-- child nodes : devices in the FPGA after programming.
-
-In the example below, when an overlay is applied targeting fpga-region0,
-fpga_mgr is used to program the FPGA.  Two bridges are controlled during
-programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
-the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
-fpga-bridges property.  During programming, these bridges are disabled, the
-firmware specified in the overlay is loaded to the FPGA using the FPGA manager
-specified in the region.  If FPGA programming succeeds, the bridges are
-reenabled and the overlay makes it into the live device tree.  The child devices
-are then populated.  If FPGA programming fails, the bridges are left disabled
-and the overlay is rejected.  The overlay's ranges property maps the lwhps
-bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
-the two child devices.
-
-Example:
-Base tree contains:
-
-	fpga_mgr: fpga-mgr@ff706000 {
-		compatible = "altr,socfpga-fpga-mgr";
-		reg = <0xff706000 0x1000
-		       0xffb90000 0x20>;
-		interrupts = <0 175 4>;
-	};
-
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fpga_region0: fpga-region0 {
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-	};
-
-Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_system.rbf";
-	fpga-bridges = <&fpga_bridge1>;
-	ranges = <0x20000 0xff200000 0x100000>,
-		 <0x0 0xc0000000 0x20000000>;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		altr,ngpio = <4>;
-		#gpio-cells = <2>;
-		clocks = <2>;
-		gpio-controller;
-	};
-
-	onchip-memory {
-		device_type = "memory";
-		compatible = "altr,onchipmem-15.1";
-		reg = <0x0 0x10000>;
-	};
-};
-
-
-Supported Use Models
-====================
-
-In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
-a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
-uses are specific to an FPGA device.
-
- * No FPGA Bridges
-   In this case, the FPGA Manager which programs the FPGA also handles the
-   bridges behind the scenes.  No FPGA Bridge devices are needed for full
-   reconfiguration.
-
- * Full reconfiguration with hardware bridges
-   In this case, there are hardware bridges between the processor and FPGA that
-   need to be controlled during full reconfiguration.  Before the overlay is
-   applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
-   FPGA Region.  The FPGA Region is the child of the bridge that allows
-   register access to the FPGA.  Additional bridges may be listed in a
-   fpga-bridges property in the FPGA region or in the device tree overlay.
-
- * Partial reconfiguration with bridges in the FPGA
-   In this case, the FPGA will have one or more PRR's that may be programmed
-   separately while the rest of the FPGA can remain active.  To manage this,
-   bridges need to exist in the FPGA that can gate the buses going to each FPGA
-   region while the buses are enabled for other sections.  Before any partial
-   reconfiguration can be done, a base FPGA image must be loaded which includes
-   PRR's with FPGA bridges.  The device tree should have an FPGA region for each
-   PRR.
-
-Device Tree Examples
-====================
-
-The intention of this section is to give some simple examples, focusing on
-the placement of the elements detailed above, especially:
- * FPGA Manager
- * FPGA Bridges
- * FPGA Region
- * ranges
- * target-path or target
-
-For the purposes of this section, I'm dividing the Device Tree into two parts,
-each with its own requirements.  The two parts are:
- * The live DT prior to the overlay being added
- * The DT overlay
-
-The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
-Bridges.  The FPGA Region's "fpga-mgr" property specifies the manager by phandle
-to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
-Region, the parent's FPGA Manager is used.  If FPGA Bridges need to be involved,
-they are specified in the FPGA Region by the "fpga-bridges" property.  During
-FPGA programming, the FPGA Region will disable the bridges that are in its
-"fpga-bridges" list and will re-enable them after FPGA programming has
-succeeded.
-
-The Device Tree Overlay will contain:
- * "target-path" or "target"
-   The insertion point where the contents of the overlay will go into the
-   live tree.  target-path is a full path, while target is a phandle.
- * "ranges"
-    The address space mapping from processor to FPGA bus(ses).
- * "firmware-name"
-   Specifies the name of the FPGA image file on the firmware search
-   path.  The search path is described in the firmware class documentation.
- * "partial-fpga-config"
-   This binding is a boolean and should be present if partial reconfiguration
-   is to be done.
- * child nodes corresponding to hardware that will be loaded in this region of
-   the FPGA.
-
-Device Tree Example: Full Reconfiguration without Bridges
-=========================================================
-
-Live Device Tree contains:
-	fpga_mgr0: fpga-mgr@f8007000 {
-		compatible = "xlnx,zynq-devcfg-1.0";
-		reg = <0xf8007000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 8 4>;
-		clocks = <&clkc 12>;
-		clock-names = "ref_clk";
-		syscon = <&slcr>;
-	};
-
-	fpga_region0: fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&fpga_mgr0>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-	};
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "zynq-gpio.bin";
-
-	gpio1: gpio@40000000 {
-		compatible = "xlnx,xps-gpio-1.00.a";
-		reg = <0x40000000 0x10000>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-		xlnx,gpio-width= <0x6>;
-	};
-};
-
-Device Tree Example: Full Reconfiguration to add PRR's
-======================================================
-
-The base FPGA Region is specified similar to the first example above.
-
-This example programs the FPGA to have two regions that can later be partially
-configured.  Each region has its own bridge in the FPGA fabric.
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "base.rbf";
-
-	fpga-bridge@4400 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4400 0x10>;
-
-		fpga_region1: fpga-region1 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-
-	fpga-bridge@4420 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4420 0x10>;
-
-		fpga_region2: fpga-region2 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-};
-
-Device Tree Example: Partial Reconfiguration
-============================================
-
-This example reprograms one of the PRR's set up in the previous example.
-
-The sequence that occurs when this overlay is similar to the above, the only
-differences are that the FPGA is partially reconfigured due to the
-"partial-fpga-config" boolean and the only bridge that is controlled during
-programming is the FPGA based bridge of fpga_region1.
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region1 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_image2.rbf";
-	partial-fpga-config;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		clocks = <0x2>;
-		altr,ngpio = <0x4>;
-		#gpio-cells = <0x2>;
-		gpio-controller;
-	};
-};
-
-Constraints
-===========
-
-It is beyond the scope of this document to fully describe all the FPGA design
-constraints required to make partial reconfiguration work[1] [2] [3], but a few
-deserve quick mention.
-
-A persona must have boundary connections that line up with those of the partition
-or region it is designed to go into.
-
-During programming, transactions through those connections must be stopped and
-the connections must be held at a fixed logic level.  This can be achieved by
-FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
-
---
-[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
-[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
-[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/fpga-region.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/fpga/fpga-region.yaml
new file mode 100644
index 000000000000..77554885a6c4
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/fpga/fpga-region.yaml
@@ -0,0 +1,358 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Region
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  CONTENTS
+   - Introduction
+   - Terminology
+   - Sequence
+   - FPGA Region
+   - Supported Use Models
+   - Constraints
+
+
+  Introduction
+  ============
+
+  FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+  the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
+  control.
+
+  The documentation hits some of the high points of FPGA usage and
+  attempts to include terminology used by both major FPGA manufacturers.  This
+  document isn't a replacement for any manufacturers specifications for FPGA
+  usage.
+
+
+  Terminology
+  ===========
+
+  Full Reconfiguration
+   * The entire FPGA is programmed.
+
+  Partial Reconfiguration (PR)
+   * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+     affected.
+   * Not all FPGA's support PR.
+
+  Partial Reconfiguration Region (PRR)
+   * Also called a "reconfigurable partition"
+   * A PRR is a specific section of an FPGA reserved for reconfiguration.
+   * A base (or static) FPGA image may create a set of PRR's that later may
+     be independently reprogrammed many times.
+   * The size and specific location of each PRR is fixed.
+   * The connections at the edge of each PRR are fixed.  The image that is loaded
+     into a PRR must fit and must use a subset of the region's connections.
+   * The busses within the FPGA are split such that each region gets its own
+     branch that may be gated independently.
+
+  Persona
+   * Also called a "partial bit stream"
+   * An FPGA image that is designed to be loaded into a PRR.  There may be
+     any number of personas designed to fit into a PRR, but only one at a time
+     may be loaded.
+   * A persona may create more regions.
+
+  FPGA Bridge
+   * FPGA Bridges gate bus signals between a host and FPGA.
+   * FPGA Bridges should be disabled while the FPGA is being programmed to
+     prevent spurious signals on the cpu bus and to the soft logic.
+   * FPGA bridges may be actual hardware or soft logic on an FPGA.
+   * During Full Reconfiguration, hardware bridges between the host and FPGA
+     will be disabled.
+   * During Partial Reconfiguration of a specific region, that region's bridge
+     will be used to gate the busses.  Traffic to other regions is not affected.
+   * In some implementations, the FPGA Manager transparently handles gating the
+     buses, eliminating the need to show the hardware FPGA bridges in the
+     device tree.
+   * An FPGA image may create a set of reprogrammable regions, each having its
+     own bridge and its own split of the busses in the FPGA.
+
+  FPGA Manager
+   * An FPGA Manager is a hardware block that programs an FPGA under the control
+     of a host processor.
+
+  Base Image
+   * Also called the "static image"
+   * An FPGA image that is designed to do full reconfiguration of the FPGA.
+   * A base image may set up a set of partial reconfiguration regions that may
+     later be reprogrammed.
+
+      ----------------       ----------------------------------
+      |  Host CPU    |       |             FPGA               |
+      |              |       |                                |
+      |          ----|       |       -----------    --------  |
+      |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
+      |          | W |       |   |   -----------    --------  |
+      |          |   |       |   |                            |
+      |          | B |<=====>|<==|   -----------    --------  |
+      |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
+      |          | I |       |   |   -----------    --------  |
+      |          | D |       |   |                            |
+      |          | G |       |   |   -----------    --------  |
+      |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
+      |          ----|       |       -----------    --------  |
+      |              |       |                                |
+      ----------------       ----------------------------------
+
+  Figure 1: An FPGA set up with a base image that created three regions.  Each
+  region (PRR0-2) gets its own split of the busses that is independently gated by
+  a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
+  reprogrammed independently while the rest of the system continues to function.
+
+
+  Sequence
+  ========
+
+  When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
+  do the following:
+
+   1. Disable appropriate FPGA bridges.
+   2. Program the FPGA using the FPGA manager.
+   3. Enable the FPGA bridges.
+   4. The Device Tree overlay is accepted into the live tree.
+   5. Child devices are populated.
+
+  When the overlay is removed, the child nodes will be removed and the FPGA Region
+  will disable the bridges.
+
+
+  FPGA Region
+  ===========
+
+  FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
+  Region brings together the elements needed to program on a running system and
+  add the child devices:
+
+   * FPGA Manager
+   * FPGA Bridges
+   * image-specific information needed to the programming.
+   * child nodes
+
+  The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+  FPGA while an operating system is running.
+
+  An FPGA Region that exists in the live Device Tree reflects the current state.
+  If the live tree shows a "firmware-name" property or child nodes under an FPGA
+  Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
+  and adds the "firmware-name" property is taken as a request to reprogram the
+  FPGA.  After reprogramming is successful, the overlay is accepted into the live
+  tree.
+
+  The base FPGA Region in the device tree represents the FPGA and supports full
+  reconfiguration.  It must include a phandle to an FPGA Manager.  The base
+  FPGA region will be the child of one of the hardware bridges (the bridge that
+  allows register access) between the cpu and the FPGA.  If there are more than
+  one bridge to control during FPGA programming, the region will also contain a
+  list of phandles to the additional hardware FPGA Bridges.
+
+  For partial reconfiguration (PR), each PR region will have an FPGA Region.
+  These FPGA regions are children of FPGA bridges which are then children of the
+  base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
+  this.
+
+  If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
+  Manager specified by its ancestor FPGA Region.  This supports both the case
+  where the same FPGA Manager is used for all of an FPGA as well the case where
+  a different FPGA Manager is used for each region.
+
+  FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
+  shutting down bridges that are upstream from the other active regions while one
+  region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
+  hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
+  within the static image of the FPGA.
+
+
+  Supported Use Models
+  ====================
+
+  In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+  a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
+  uses are specific to an FPGA device.
+
+   * No FPGA Bridges
+     In this case, the FPGA Manager which programs the FPGA also handles the
+     bridges behind the scenes.  No FPGA Bridge devices are needed for full
+     reconfiguration.
+
+   * Full reconfiguration with hardware bridges
+     In this case, there are hardware bridges between the processor and FPGA that
+     need to be controlled during full reconfiguration.  Before the overlay is
+     applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+     FPGA Region.  The FPGA Region is the child of the bridge that allows
+     register access to the FPGA.  Additional bridges may be listed in a
+     fpga-bridges property in the FPGA region or in the device tree overlay.
+
+   * Partial reconfiguration with bridges in the FPGA
+     In this case, the FPGA will have one or more PRR's that may be programmed
+     separately while the rest of the FPGA can remain active.  To manage this,
+     bridges need to exist in the FPGA that can gate the buses going to each FPGA
+     region while the buses are enabled for other sections.  Before any partial
+     reconfiguration can be done, a base FPGA image must be loaded which includes
+     PRR's with FPGA bridges.  The device tree should have an FPGA region for each
+     PRR.
+
+  Constraints
+  ===========
+
+  It is beyond the scope of this document to fully describe all the FPGA design
+  constraints required to make partial reconfiguration work[1] [2] [3], but a few
+  deserve quick mention.
+
+  A persona must have boundary connections that line up with those of the partition
+  or region it is designed to go into.
+
+  During programming, transactions through those connections must be stopped and
+  the connections must be held at a fixed logic level.  This can be achieved by
+  FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+  --
+  [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+  [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+  [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
+
+properties:
+  $nodename:
+    pattern: "^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  compatible:
+    const: fpga-region
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+  "#address-cells": true
+  "#size-cells": true
+
+  config-complete-timeout-us:
+    description:
+      The maximum time in microseconds time for the FPGA to go to operating
+      mode after the region has been programmed.
+
+  encrypted-fpga-config:
+    type: boolean
+    description:
+      Set if the bitstream is encrypted.
+
+  external-fpga-config:
+    type: boolean
+    description:
+      Set if the FPGA has already been configured prior to OS boot up.
+
+  firmware-name:
+    maxItems: 1
+    description:
+      Should contain the name of an FPGA image file located on the firmware
+      search path. If this property shows up in a live device tree it indicates
+      that the FPGA has already been programmed with this image.
+      If this property is in an overlay targeting an FPGA region, it is
+      a request to program the FPGA with that image.
+
+  fpga-bridges:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles to FPGA Bridges that must be
+      controlled during FPGA programming along with the parent FPGA bridge.
+      This property is optional if the FPGA Manager handles the bridges.
+      If the fpga-region is  the child of an fpga-bridge, the list should not
+      contain the parent bridge.
+
+  fpga-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should contain a phandle to an FPGA Manager.  Child FPGA Regions
+      inherit this property from their ancestor regions.  An fpga-mgr property
+      in a region will override any inherited FPGA manager.
+
+  partial-fpga-config:
+    type: boolean
+    description:
+      Set if partial reconfiguration is to be done, otherwise full
+      reconfiguration is done.
+
+  region-freeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become disabled before the region has been programmed.
+
+  region-unfreeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become enabled after the region has been programmed.
+
+required:
+  - compatible
+  - fpga-mgr
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /*
+     * Full Reconfiguration without Bridges with DT overlay
+     */
+    fpga_region0: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr0>;
+      ranges = <0x10000000 0x20000000 0x10000000>;
+
+      /* DT Overlay contains: &fpga_region0 */
+      firmware-name = "zynq-gpio.bin";
+      gpio@40000000 {
+        compatible = "xlnx,xps-gpio-1.00.a";
+        reg = <0x40000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+      };
+    };
+
+  - |
+    /*
+     * Partial reconfiguration with bridge
+     */
+    fpga_region1: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      ranges;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr1>;
+      fpga-bridges = <&fpga_bridge1>;
+      partial-fpga-config;
+
+      /* DT Overlay contains: &fpga_region1 */
+      firmware-name = "zynq-gpio-partial.bin";
+      clk: clock {
+        compatible = "fixed-factor-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        clock-div = <2>;
+        clock-mult = <1>;
+      };
+      axi {
+        compatible = "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        gpio@40000000 {
+          compatible = "xlnx,xps-gpio-1.00.a";
+          reg = <0x40000000 0x10000>;
+          #gpio-cells = <2>;
+          gpio-controller;
+          clocks = <&clk>;
+        };
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
index 26f18834caa3..80833462f620 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
@@ -26,7 +26,7 @@ additionalProperties: false
 
 examples:
   - |
-    versal_fpga: versal_fpga {
+    versal_fpga: versal-fpga {
          compatible = "xlnx,versal-fpga";
     };
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
new file mode 100644
index 000000000000..cf11aa7ec8c7
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed GPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-gpio
+      - aspeed,ast2500-gpio
+      - aspeed,ast2600-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: The clock to use for debounce timings
+
+  gpio-controller: true
+  gpio-line-names:
+    minItems: 36
+    maxItems: 232
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ngpios:
+    minimum: 36
+    maximum: 232
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2400-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 220
+          maxItems: 220
+        ngpios:
+          const: 220
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2500-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 232
+          maxItems: 232
+        ngpios:
+          const: 232
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 208
+        ngpios:
+          enum: [ 36, 208 ]
+      required:
+        - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1e780000 {
+        compatible = "aspeed,ast2400-gpio";
+        reg = <0x1e780000 0x1000>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+  - |
+    gpio: gpio@1e780000 {
+        compatible = "aspeed,ast2500-gpio";
+        reg = <0x1e780000 0x200>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 232>;
+    };
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio@1e780000 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780000 0x400>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 208>;
+        ngpios = <208>;
+    };
+    gpio1: gpio@1e780800 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780800 0x800>;
+        clocks = <&syscon ASPEED_CLK_APB1>;
+        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 208 36>;
+        ngpios = <36>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
index 6e81f8b755c5..d543fd1b8b23 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
@@ -1,7 +1,6 @@
 Gateworks PLD GPIO controller bindings
 
-The GPIO controller should be a child node on an I2C bus,
-see: i2c/i2c.txt for details.
+The GPIO controller should be a child node on an I2C bus.
 
 Required properties:
 - compatible: Should be "gateworks,pld-gpio"
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc3a71a..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio@1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
index f1bd1e6b2e1f..33d4e4716516 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -115,7 +115,7 @@ allOf:
       required:
         - reg
 
-unevaluatedProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-nmk.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
deleted file mode 100644
index 8315ac7780ef..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Nomadik GPIO controller
-
-Required properties:
-- compatible            : Should be "st,nomadik-gpio".
-- reg                   : Physical base address and length of the controller's registers.
-- interrupts            : The interrupt outputs from the controller.
-- #gpio-cells           : Should be two:
-                            The first cell is the pin number.
-                            The second cell is used to specify optional parameters:
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered.
-                                  2 = high-to-low edge triggered.
-                                  4 = active high level-sensitive.
-                                  8 = active low level-sensitive.
-- gpio-controller       : Marks the device node as a GPIO controller.
-- interrupt-controller  : Marks the device node as an interrupt controller.
-- gpio-bank             : Specifies which bank a controller owns.
-- st,supports-sleepmode : Specifies whether controller can sleep or not
-
-Example:
-
-                gpio1: gpio@8012e080 {
-                        compatible = "st,nomadik-gpio";
-                        reg =  <0x8012e080 0x80>;
-                        interrupts = <0 120 0x4>;
-                        #gpio-cells = <2>;
-                        gpio-controller;
-                        interrupt-controller;
-                        st,supports-sleepmode;
-                        gpio-bank = <1>;
-                };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 452f8972a965..6f73961001b7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -28,6 +28,9 @@ properties:
     minItems: 4
     maxItems: 8
 
+  label:
+    description: A descriptive name for this device.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
index 9cf6137dd524..65155bb701a9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -9,7 +9,7 @@ title: Marvell PXA GPIO controller
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - if:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index aa424e2b95f8..cc7a950a6030 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,gpio-r8a779a0     # R-Car V3U
               - renesas,gpio-r8a779f0     # R-Car S4-8
               - renesas,gpio-r8a779g0     # R-Car V4H
+              - renesas,gpio-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
new file mode 100644
index 000000000000..38d37d8f7201
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nomadik GPIO controller
+
+description:
+  The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also
+  been called ST STA2X11. On the Nomadik platform, this driver is intertwined
+  with pinctrl-nomadik.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-bank:
+    description: System-wide GPIO bank index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st,supports-sleepmode:
+    description: Whether the controller can sleep or not.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  clocks:
+    maxItems: 1
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - interrupt-controller
+  - gpio-bank
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-gpio
+    then:
+      properties:
+        st,supports-sleepmode: false
+
+examples:
+  - |
+    gpio@8012e080 {
+        compatible = "st,nomadik-gpio";
+        reg =  <0x8012e080 0x80>;
+        interrupts = <0 120 0x4>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        st,supports-sleepmode;
+        gpio-bank = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/img,powervr.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
similarity index 91%
rename from Documentation/devicetree/bindings/gpu/img,powervr.yaml
rename to Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
index a13298f1a182..256e252f8087 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/img,powervr.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
@@ -2,10 +2,10 @@
 # Copyright (c) 2023 Imagination Technologies Ltd.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/gpu/img,powervr.yaml#
+$id: http://devicetree.org/schemas/gpu/img,powervr-rogue.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Imagination Technologies PowerVR and IMG GPU
+title: Imagination Technologies PowerVR and IMG Rogue GPUs
 
 maintainers:
   - Frank Binns <frank.binns@imgtec.com>
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml
new file mode 100644
index 000000000000..f5898b04381c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+# Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr-sgx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR SGX GPUs
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,omap3430-gpu # Rev 121
+              - ti,omap3630-gpu # Rev 125
+          - const: img,powervr-sgx530
+      - items:
+          - enum:
+              - ingenic,jz4780-gpu # Rev 130
+              - ti,omap4430-gpu # Rev 120
+          - const: img,powervr-sgx540
+      - items:
+          - enum:
+              - allwinner,sun6i-a31-gpu # MP2 Rev 115
+              - ti,omap4470-gpu # MP1 Rev 112
+              - ti,omap5432-gpu # MP2 Rev 105
+              - ti,am5728-gpu # MP2 Rev 116
+              - ti,am6548-gpu # MP1 Rev 117
+          - const: img,powervr-sgx544
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am6548-gpu
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-gpu
+              - ingenic,jz4780-gpu
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-gpu
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ingenic,jz4780-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@7000000 {
+        compatible = "ti,am6548-gpu", "img,powervr-sgx544";
+        reg = <0x7000000 0x10000>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@1c40000 {
+        compatible = "allwinner,sun6i-a31-gpu", "img,powervr-sgx544";
+        reg = <0x01c40000 0x10000>;
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu 1>, <&ccu 2>;
+        clock-names = "core", "mem";
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 2e45364d0543..be7e9e91a3a8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -46,7 +46,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index ab87f51c5aef..b68061294964 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -33,10 +33,6 @@ properties:
   reg:
     maxItems: 1
 
-  shunt-resistor-micro-ohms:
-    description:
-      Shunt resistor value in micro-Ohm.
-
   adi,volt-curr-sample-average:
     description: |
       Number of samples to be used to report voltage and current values.
@@ -50,6 +46,7 @@ properties:
     enum: [1, 2, 4, 8, 16, 32, 64, 128]
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +104,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
index 5cb66e97e816..6401b0a9aff4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
@@ -31,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
new file mode 100644
index 000000000000..4854b95a93e3
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc4282
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,rsense-nano-ohms:
+    description: Value of the sense resistor.
+
+  adi,vin-mode-microvolt:
+    description:
+      Selects operating range for the Undervoltage, Overvoltage and Foldback
+      pins. Also for the ADC. Should be set to the nominal input voltage.
+    enum: [3300000, 5000000, 12000000, 24000000]
+    default: 12000000
+
+  adi,fet-bad-timeout-ms:
+    description:
+      From the moment a FET bad conditions is present, this property selects the
+      wait time/timeout for a FET-bad fault to be signaled. Setting this to 0,
+      disables FET bad faults to be reported.
+    default: 255
+    maximum: 255
+
+  adi,overvoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,undervoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,current-limit-sense-microvolt:
+    description:
+      The current limit sense voltage of the chip is adjustable between
+      12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current
+      on the load.
+    enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375]
+    default: 25000
+
+  adi,overcurrent-retry:
+    description:
+      If set, enables the chip to auto-retry 256 timer cycles after an
+      Overcurrent fault.
+    type: boolean
+
+  adi,overvoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Overvoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,undervoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Undervoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,fault-log-enable:
+    description:
+      If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written
+      to the EEPROM when a fault bit transitions high and hence, will be
+      available after a power cycle (the chip loads the contents of
+      the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot).
+    type: boolean
+
+  adi,gpio1-mode:
+    description: Defines the function of the Pin. It can indicate that power is
+      good (PULL the pin low when power is not good) or that power is bad (Go
+      into high-z when power is not good).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [power_bad, power_good]
+    default: power_good
+
+  adi,gpio2-mode:
+    description: Defines the function of the Pin. It can be set as the input for
+      the ADC or indicating that the MOSFET is in stress (dissipating power).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [adc_input, stress_fet]
+    default: adc_input
+
+  adi,gpio3-monitor-enable:
+    description: If set, gpio3 is set as input for the ADC instead of gpio2.
+    type: boolean
+
+allOf:
+  - if:
+      required:
+        - adi,gpio3-monitor-enable
+    then:
+      properties:
+        adi,gpio2-mode:
+          const: stress_fet
+
+required:
+  - compatible
+  - reg
+  - adi,rsense-nano-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@50 {
+            compatible = "adi,ltc4282";
+            reg = <0x50>;
+            adi,rsense-nano-ohms = <500>;
+
+            adi,gpio1-mode = "power_good";
+            adi,gpio2-mode = "adc_input";
+        };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
new file mode 100644
index 000000000000..17351fdbefce
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipCap 2 humidity and temperature iio sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  Relative humidity and temperature sensor on I2C bus.
+
+  Datasheets:
+    https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+properties:
+  compatible:
+    oneOf:
+      - const: amphenol,cc2d23
+      - items:
+          - enum:
+              - amphenol,cc2d23s
+              - amphenol,cc2d25
+              - amphenol,cc2d25s
+              - amphenol,cc2d33
+              - amphenol,cc2d33s
+              - amphenol,cc2d35
+              - amphenol,cc2d35s
+          - const: amphenol,cc2d23
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: measurement ready indicator
+      - description: low humidity alarm
+      - description: high humidity alarm
+
+  interrupt-names:
+    items:
+      - const: ready
+      - const: low
+      - const: high
+
+  vdd-supply:
+    description:
+      Dedicated, controllable supply-regulator to reset the device and
+      enter in command mode.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@28 {
+            compatible = "amphenol,cc2d23s", "amphenol,cc2d23";
+            reg = <0x28>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>,
+                         <5 IRQ_TYPE_EDGE_RISING>,
+                         <6 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "ready", "low", "high";
+            vdd-supply = <&reg_vdd>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
new file mode 100644
index 000000000000..9e5ed901ae54
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2023 Aspeed, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED G6 PWM and Fan Tach controller
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  The ASPEED PWM controller can support up to 16 PWM outputs.
+  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
+  They are independent hardware blocks, which are different from the
+  previous version of the ASPEED chip.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-pwm-tach
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - tach-ch
+
+required:
+  - reg
+  - clocks
+  - resets
+  - "#pwm-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    pwm_tach: pwm-tach-controller@1e610000 {
+      compatible = "aspeed,ast2600-pwm-tach";
+      reg = <0x1e610000 0x100>;
+      clocks = <&syscon ASPEED_CLK_AHB>;
+      resets = <&syscon ASPEED_RESET_PWM>;
+      #pwm-cells = <3>;
+
+      fan-0 {
+        tach-ch = /bits/ 8 <0x0>;
+        pwms = <&pwm_tach 0 40000 0>;
+      };
+
+      fan-1 {
+        tach-ch = /bits/ 8 <0x1 0x2>;
+        pwms = <&pwm_tach 1 40000 0>;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/fan-common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/fan-common.yaml
new file mode 100644
index 000000000000..0fb738081699
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/fan-common.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+properties:
+  max-rpm:
+    description:
+      Max RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100000
+
+  min-rpm:
+    description:
+      Min RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1000
+
+  pulses-per-revolution:
+    description:
+      The number of pulse from fan sensor per revolution.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4
+
+  tach-div:
+    description:
+      Divisor for the tach sampling clock, which determines the sensitivity of the tach pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  target-rpm:
+    description:
+      The default desired fan speed in RPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fan-driving-mode:
+    description:
+      Select the driving mode of the fan.(DC, PWM and so on)
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ dc, pwm ]
+
+  pwms:
+    description:
+      PWM provider.
+    maxItems: 1
+
+  "#cooling-cells":
+    const: 2
+
+  cooling-levels:
+    description:
+      The control value which correspond to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  tach-ch:
+    description:
+      The tach channel used for the fan.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  label:
+    description:
+      Optional fan label
+
+  fan-supply:
+    description:
+      Power supply for fan.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml
new file mode 100644
index 000000000000..dc86b5c72cf2
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware Monitoring Devices Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  label:
+    description: A descriptive name for this device.
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor.
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
index e62aff670478..8f0095bb7f6e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -25,7 +25,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
index 98ca163d3486..853df9fef6c8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
@@ -25,15 +25,14 @@ properties:
       The default is 102.4 volts.
     type: boolean
 
-  shunt-resistor-micro-ohms:
-    description:
-      Resistor value micro-ohms.
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
index ed269e428a3d..29bd7460cc26 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -57,6 +57,7 @@ required:
   - reg
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       not:
         properties:
@@ -71,7 +72,7 @@ allOf:
       properties:
         interrupts: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
index 358b262431fc..e3db642878d4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -25,6 +25,7 @@ properties:
       - nuvoton,nct6796
       - nuvoton,nct6797
       - nuvoton,nct6798
+      - nuvoton,nct6799
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
index ded1c115764b..5c4e52b472ad 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
@@ -30,6 +30,23 @@ properties:
       unconnected(has internal pull-down).
     type: boolean
 
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -38,6 +55,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,5 +63,15 @@ examples:
         tda38640@40 {
             compatible = "infineon,tda38640";
             reg = <0x40>;
+
+            interrupt-parent = <&smb_pex_cpu0_event>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                pvnn_main_cpu0: vout {
+                    regulator-name = "pvnn_main_cpu0";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
         };
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
index da8292bc32f5..a20f140dc79a 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -34,11 +34,26 @@ properties:
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/hwmon/hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index 378d1f6aeeb3..df86c2c92037 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -28,10 +28,14 @@ properties:
       - ti,ina231
       - ti,ina237
       - ti,ina238
+      - ti,ina260
 
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   shunt-resistor:
     description:
       Shunt resistor value in micro-Ohm.
@@ -66,7 +70,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -77,6 +84,8 @@ examples:
         power-sensor@44 {
             compatible = "ti,ina220";
             reg = <0x44>;
+            #io-channel-cells = <1>;
+            label = "vdd_3v0";
             shunt-resistor = <1000>;
             vs-supply = <&vdd_3v0>;
         };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index cdd1489e0c54..227858e76058 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index ebc8d466c1aa..f58248c29e22 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -35,7 +35,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec399..b1c13bab2472 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -25,7 +25,9 @@ properties:
               - atmel,sama5d2-i2c
               - microchip,sam9x60-i2c
       - items:
-          - const: microchip,sama7g5-i2c
+          - enum:
+              - microchip,sama7g5-i2c
+              - microchip,sam9x7-i2c
           - const: microchip,sam9x60-i2c
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
index 2c08f2a7cf1e..b813f6d4810c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
@@ -32,7 +32,6 @@ description: |
       +-------------------------------+
 
 allOf:
-  - $ref: i2c-mux.yaml
   - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
@@ -41,6 +40,8 @@ properties:
 
   i2c-parent:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       List of phandles of I2C masters available for selection.  The first one
       will be used as default.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
index df9c57bca2a8..cc8bba5537b9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -33,6 +33,7 @@ properties:
           - const: samsung,exynos7-hsi2c
       - items:
           - enum:
+              - google,gs101-hsi2c
               - samsung,exynos850-hsi2c
           - const: samsung,exynosautov9-hsi2c
       - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
index 4656f5112b84..54d500be6aaa 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -24,6 +24,7 @@ properties:
               - fsl,imx8qm-lpi2c
               - fsl,imx8ulp-lpi2c
               - fsl,imx93-lpi2c
+              - fsl,imx95-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 70fb69b923c4..b1d7d14c0be4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -96,6 +96,6 @@ examples:
         interrupts = <43 2>;
         interrupt-parent = <&mpic>;
         clock-frequency = <400000>;
-        i2c-scl-clk-low-timeout-us = <10000>;
+        i2c-transfer-timeout-us = <10000>;
     };
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 2d7bb998b0e9..9aa0585200c9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -71,6 +71,23 @@ properties:
     description: A voltage regulator supplying power to the chip. On PCA9846
       the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
 
+  maxim,isolate-stuck-channel:
+    type: boolean
+    description: Allows to use non faulty channels while a stuck channel is
+      isolated from the upstream bus. If not set all channels are isolated from
+      the upstream bus until the fault is cleared.
+
+  maxim,send-flush-out-sequence:
+    type: boolean
+    description: Send a flush-out sequence to stuck auxiliary buses
+      automatically after a stuck channel is being detected.
+
+  maxim,preconnection-wiggle-test-enable:
+    type: boolean
+    description: Send a STOP condition to the auxiliary buses when the switch
+      register activates a channel to detect a stuck high fault. On fault the
+      channel is isolated from the upstream bus.
+
 required:
   - compatible
   - reg
@@ -95,6 +112,19 @@ allOf:
         "#interrupt-cells": false
         interrupt-controller: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7357
+    then:
+      properties:
+        maxim,isolate-stuck-channel: false
+        maxim,send-flush-out-sequence: false
+        maxim,preconnection-wiggle-test-enable: false
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
index 31386a8d7684..e89ee361741e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Marvell MMP I2C controller
 
 maintainers:
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/i2c.txt
deleted file mode 100644
index fc3dd7ec0445..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/i2c.txt
+++ /dev/null
@@ -1,151 +0,0 @@
-Generic device tree bindings for I2C busses
-===========================================
-
-This document describes generic bindings which can be used to describe I2C
-busses and their child devices in a device tree.
-
-Required properties (per bus)
------------------------------
-
-- #address-cells  - should be <1>. Read more about addresses below.
-- #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller
-
-For other required properties e.g. to describe register sets,
-clocks, etc. check the binding documentation of the specific driver.
-
-The cells properties above define that an address of children of an I2C bus
-are described by a single value.
-
-Optional properties (per bus)
------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- clock-frequency
-	frequency of bus clock in Hz.
-
-- i2c-bus
-	For I2C adapters that have child nodes that are a mixture of both I2C
-	devices and non-I2C devices, the 'i2c-bus' subnode can be used for
-	populating I2C devices. If the 'i2c-bus' subnode is present, only
-	subnodes of this will be considered as I2C slaves. The properties,
-	'#address-cells' and '#size-cells' must be defined under this subnode
-	if present.
-
-- i2c-scl-falling-time-ns
-	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-scl-internal-delay-ns
-	Number of nanoseconds the IP core additionally needs to setup SCL.
-
-- i2c-scl-rising-time-ns
-	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
-	specification.
-
-- i2c-sda-falling-time-ns
-	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-analog-filter
-	Enable analog filter for i2c lines.
-
-- i2c-digital-filter
-	Enable digital filter for i2c lines.
-
-- i2c-digital-filter-width-ns
-	Width of spikes which can be filtered by digital filter
-	(i2c-digital-filter). This width is specified in nanoseconds.
-
-- i2c-analog-filter-cutoff-frequency
-	Frequency that the analog filter (i2c-analog-filter) uses to distinguish
-	which signal to filter. Signal with higher frequency than specified will
-	be filtered out. Only lower frequency will pass (this is applicable to
-	a low-pass analog filter). Typical value should be above the normal
-	i2c bus clock frequency (clock-frequency).
-	Specified in Hz.
-
-- multi-master
-	states that there is another master active on this bus. The OS can use
-	this information to adapt power management to keep the arbitration awake
-	all the time, for example. Can not be combined with 'single-master'.
-
-- pinctrl
-	add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
-	recovery, call it "gpio" or "recovery" (deprecated) state
-
-- scl-gpios
-	specify the gpio related to SCL pin. Used for GPIO bus recovery.
-
-- sda-gpios
-	specify the gpio related to SDA pin. Optional for GPIO bus recovery.
-
-- single-master
-	states that there is no other master active on this bus. The OS can use
-	this information to detect a stalled bus more reliably, for example.
-	Can not be combined with 'multi-master'.
-
-- smbus
-	states that additional SMBus restrictions and features apply to this bus.
-	An example of feature is SMBusHostNotify. Examples of restrictions are
-	more reserved addresses and timeout definitions.
-
-- smbus-alert
-	states that the optional SMBus-Alert feature apply to this bus.
-
-- mctp-controller
-	indicates that the system is accessible via this bus as an endpoint for
-	MCTP over I2C transport.
-
-Required properties (per child device)
---------------------------------------
-
-- compatible
-	name of I2C slave device
-
-- reg
-	One or many I2C slave addresses. These are usually a 7 bit addresses.
-	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
-	used to mark a 10 bit address. It is needed to avoid the ambiguity
-	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
-	which, in theory, can be on the same bus.
-	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
-	listen to be devices ourselves.
-
-Optional properties (per child device)
---------------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- reg-names
-	Names of map programmable addresses.
-	It can contain any map needing another address than default one.
-
-- wakeup-source
-	device can be used as a wakeup source.
-
-Binding may contain optional "interrupts" property, describing interrupts
-used by the device. I2C core will assign "irq" interrupt (or the very first
-interrupt if not using interrupt names) as primary interrupt for the slave.
-
-Alternatively, devices supporting SMBus Host Notify, and connected to
-adapters that support this feature, may use "host-notify" property. I2C
-core will create a virtual interrupt for Host Notify and assign it as
-primary interrupt for the slave.
-
-Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
-interrupt for the device. If "wakeup" interrupt name is not present in the
-binding, then primary interrupt will be used as wakeup interrupt.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
index b8319dcf3d8a..8676335e9e94 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -21,8 +21,7 @@ description: |
   See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
   binding.
 
-  This node represents an I2C controller. See ../i2c/i2c.txt for details
-  of the core I2C binding.
+  This node represents an I2C controller.
 
 properties:
   compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index 8386cfe21532..f0eabff86310 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -270,7 +270,7 @@ examples:
 
                 port {
                     ov7251_ep: endpoint {
-                        data-lanes = <0 1>;
+                        data-lanes = <0>;
                         link-frequencies = /bits/ 64 <240000000 319200000>;
                         remote-endpoint = <&csiphy3_ep>;
                     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index c4ace5585e1e..51b220da461b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,i2c-r8a779a0     # R-Car V3U
               - renesas,i2c-r8a779f0     # R-Car S4-8
               - renesas,i2c-r8a779g0     # R-Car V4H
+              - renesas,i2c-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-i2c # R-Car Gen4
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
index 16024415a4a7..44c54b162bb1 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -14,9 +14,6 @@ description: The Nomadik I2C host controller began its life in the ST
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
 select:
   properties:
@@ -24,21 +21,23 @@ select:
       contains:
         enum:
           - st,nomadik-i2c
+          - mobileye,eyeq5-i2c
   required:
     - compatible
 
 properties:
   compatible:
     oneOf:
-      # The variant found in STn8815
       - items:
           - const: st,nomadik-i2c
           - const: arm,primecell
-      # The variant found in DB8500
       - items:
           - const: stericsson,db8500-i2c
           - const: st,nomadik-i2c
           - const: arm,primecell
+      - items:
+          - const: mobileye,eyeq5-i2c
+          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -55,7 +54,7 @@ properties:
       - items:
           - const: mclk
           - const: apb_pclk
-      # Clock name in DB8500
+      # Clock name in DB8500 or EyeQ5
       - items:
           - const: i2cclk
           - const: apb_pclk
@@ -70,6 +69,16 @@ properties:
     minimum: 1
     maximum: 400000
 
+  mobileye,olb:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to OLB system controller node.
+          - description: Platform-wide controller ID (integer starting from zero).
+    description:
+      The phandle pointing to OLB system controller node, with the I2C
+      controller index.
+
 required:
   - compatible
   - reg
@@ -79,6 +88,20 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-i2c
+    then:
+      required:
+        - mobileye,olb
+    else:
+      properties:
+        mobileye,olb: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -111,5 +134,19 @@ examples:
       clocks = <&i2c0clk>, <&pclki2c0>;
       clock-names = "mclk", "apb_pclk";
     };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    i2c@300000 {
+      compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+      reg = <0x300000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c_ser_clk>, <&i2c_clk>;
+      clock-names = "i2cclk", "apb_pclk";
+      mobileye,olb = <&olb 0>;
+    };
 
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
index fcc3dbff9c9a..47be5d9a32d4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -57,7 +57,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    i3c-master@2000 {
+    i3c@2000 {
         compatible = "aspeed,ast2600-i3c";
         reg = <0x2000 0x1000>;
         #address-cells = <3>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
index cc40d25358ec..cad6d53d0e2e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -41,7 +41,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@d040000 {
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/i3c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/i3c.yaml
index c816e295d565..113957ebe9f1 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/i3c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -17,7 +17,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^i3c-master@[0-9a-f]+$"
+    pattern: "^i3c@[0-9a-f]+$"
 
   "#address-cells":
     const: 3
@@ -71,7 +71,7 @@ patternProperties:
     description: |
       I2C child, should be named: <device-type>@<i2c-address>
 
-      All properties described in Documentation/devicetree/bindings/i2c/i2c.txt
+      All properties described in dtschema schemas/i2c/i2c-controller.yaml
       are valid here, except the reg property whose content is changed.
 
     properties:
@@ -153,7 +153,7 @@ additionalProperties: true
 
 examples:
   - |
-    i3c-master@d040000 {
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
index 5dda8cb44cdb..39bb1a1784c9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -43,7 +43,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
       compatible = "mipi-i3c-hci";
       reg = <0xa0000000 0x2000>;
       interrupts = <89>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
index 133855f11b4f..c56ff77677f1 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -48,7 +48,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
         compatible = "silvaco,i3c-master-v1";
         clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
         clock-names = "pclk", "fast_clk", "slow_clk";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
index 7a76fd32962a..c0e805e531be 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -35,7 +35,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@2000 {
+    i3c@2000 {
         compatible = "snps,dw-i3c-master-1.00a";
         #address-cells = <3>;
         #size-cells = <0>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/adc.yaml
index 261601729745..36775f8f71df 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -22,7 +22,6 @@ properties:
     maxItems: 1
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Unique name to identify which channel this is.
 
   bipolar:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index 7aa748d6b7a0..eecd5fbab695 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -44,6 +44,9 @@ properties:
       Pin that controls the powerdown mode of the device.
     maxItems: 1
 
+  io-backends:
+    maxItems: 1
+
   reset-gpios:
     description:
       Reset pin for the device.
@@ -68,6 +71,7 @@ examples:
             reg = <0>;
             clocks = <&adc_clk>;
             clock-names = "adc-clk";
+            io-backends = <&iio_backend>;
         };
     };
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f84b..3d49d21ad33d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -39,12 +39,15 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
 
 additionalProperties: false
 
@@ -55,7 +58,6 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..47a11a9ac95e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
index dacc526dc695..dfc3f512918f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@@ -31,7 +31,6 @@ properties:
       - description: normal conversion, include EOC (End of Conversion),
           ECH (End of Chain), JEOC (End of Injected Conversion) and
           JECH (End of injected Chain).
-      - description: Self-testing Interrupts.
 
   clocks:
     maxItems: 1
@@ -70,8 +69,7 @@ examples:
             reg = <0x44530000 0x10000>;
             interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&clk IMX93_CLK_ADC1_GATE>;
             clock-names = "ipg";
             vref-supply = <&reg_vref_1v8>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 40fa0710f1f0..c28db0d635a0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -75,7 +75,6 @@ patternProperties:
           in the PMIC-specific files in include/dt-bindings/iio/.
 
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: |
             ADC input of the platform as seen in the schematics.
             For thermistor inputs connected to generic AMUX or GPIO inputs
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
index 88e008629ea8..af2c3a67f888 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -25,7 +25,14 @@ description: |
 
 properties:
   compatible:
-    const: richtek,rtq6056
+    oneOf:
+      - enum:
+          - richtek,rtq6056
+          - richtek,rtq6059
+      - items:
+          - enum:
+              - richtek,rtq6053
+          - const: richtek,rtq6056
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 000000000000..bf5a43a81d59
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+description: |
+  Datasheet at: https://www.ti.com/product/ADS1298
+  Bindings for this chip aren't complete.
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1298
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog power supply, voltage between AVDD and AVSS. When providing a
+      symmetric +/- 2.5V, the regulator should report 5V.
+
+  vref-supply:
+    description:
+      Optional reference voltage. If omitted, internal reference is used,
+      which is 2.4V when analog supply is below 4.4V, 4V otherwise.
+
+  clocks:
+    description: Optional 2.048 MHz external source clock on CLK pin
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt on DRDY pin, triggers on falling edge
+    maxItems: 1
+
+  label: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1 {
+          reg = <1>;
+          compatible = "ti,ads1298";
+          label = "ads1298-1-ecg";
+          avdd-supply = <&reg_iso_5v_a>;
+          clocks = <&clk_ads1298>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+          spi-max-frequency = <20000000>;
+          spi-cpha;
+        };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index dddf97b50549..4151f99b42aa 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -39,6 +39,17 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  '#io-channel-cells':
+    description:
+      In addition to consuming the measurement services of a voltage
+      output channel, the voltage divider can act as a provider of
+      measurement services to other devices. This is particularly
+      useful in scenarios wherein an ADC has an analog frontend,
+      such as a voltage divider, and then consuming its raw value
+      isn't interesting. In this case, the voltage before the divider
+      is desired.
+    const: 1
+
   output-ohms:
     description:
       Resistance Rout over which the output voltage is measured. See full-ohms.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 67de9d4e3a1d..3a470459b965 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -21,6 +21,8 @@ description: |
   HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
 
+  LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf
 
 properties:
   compatible:
@@ -28,16 +30,55 @@ properties:
       - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
+      - adi,ltc6373
 
   vcc-supply: true
 
   ctrl-gpios:
     description:
-      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
-      connected to the control pins V1-V6.
-    minItems: 6
+      Must contain an array of GPIO specifiers, referring to the GPIO pins
+      connected to the control pins.
+        ADRF5740  - 4 GPIO connected to D2-D5
+        HMC540S   - 4 GPIO connected to V1-V4
+        HMC425A   - 6 GPIO connected to V1-V6
+        LTC6373   - 3 GPIO connected to A0-A2
+    minItems: 1
     maxItems: 6
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,hmc425a
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 6
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,adrf5740
+              - const: adi,hmc540s
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 4
+          maxItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ltc6373
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 3
+          maxItems: 3
+
 required:
   - compatible
   - ctrl-gpios
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
new file mode 100644
index 000000000000..2bcf4bbc12e4
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMFM2000 Dual Microwave Down Converter
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+  Dual microwave down converter module with input RF and LO frequency ranges
+  from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz.
+  It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down
+  conversion path.
+
+properties:
+  compatible:
+    enum:
+      - adi,admfm2000
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of the device.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 1
+
+      adi,mixer-mode:
+        description:
+          Enable mixer mode for the channel. It downconverts RF between 5 GHz
+          and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel
+          is in direct IF mode which bypasses the mixer and downconverts RF
+          between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz.
+        type: boolean
+
+      switch-gpios:
+        description: |
+          GPIOs to select the RF path for the channel. The same state of CTRL-A
+          and CTRL-B GPIOs is not permitted.
+          CTRL-A   CTRL-B    CH1 Status        CH2 Status
+          1        0         Direct IF mode    Mixer mode
+          0        1         Mixer mode        Direct IF mode
+
+        items:
+          - description: CTRL-A GPIO
+          - description: CTRL-B GPIO
+
+      attenuation-gpios:
+        description: |
+          Choice of attenuation:
+          DSA-V4  DSA-V3  DSA-V2  DSA-V1  DSA-V0
+          1       1       1       1       1        0 dB
+          1       1       1       1       0        -1 dB
+          1       1       1       0       1        -2 dB
+          1       1       0       1       1        -4 dB
+          1       0       1       1       1        -8 dB
+          0       1       1       1       1        -16 dB
+          0       0       0       0       0        -31 dB
+
+        items:
+          - description: DSA-V0 GPIO
+          - description: DSA-V1 GPIO
+          - description: DSA-V2 GPIO
+          - description: DSA-V3 GPIO
+          - description: DSA-V4 GPIO
+
+    required:
+      - reg
+      - switch-gpios
+      - attenuation-gpios
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    converter {
+      compatible = "adi,admfm2000";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+        switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>,
+                       <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>,
+                            <&gpio 22 GPIO_ACTIVE_LOW>,
+                            <&gpio 23 GPIO_ACTIVE_LOW>,
+                            <&gpio 24 GPIO_ACTIVE_LOW>,
+                            <&gpio 25 GPIO_ACTIVE_LOW>;
+      };
+
+      channel@1 {
+        reg = <1>;
+        adi,mixer-mode;
+        switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>,
+                       <&gpio 4 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                            <&gpio 5 GPIO_ACTIVE_LOW>,
+                            <&gpio 6 GPIO_ACTIVE_LOW>,
+                            <&gpio 16 GPIO_ACTIVE_LOW>,
+                            <&gpio 26 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index 1414ba9977c1..3c6fe74af0b8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -22,6 +22,9 @@ properties:
   vdd-supply: true
   vddio-supply: true
 
+  spi-max-frequency:
+    maximum: 10000000
+
   interrupts:
     minItems: 1
     maxItems: 2
@@ -33,7 +36,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 79e75a8675cb..e3eca8917517 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -27,6 +27,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
index 7f6d0f9edc75..8b5dedd1a598 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
@@ -43,6 +43,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -51,5 +52,7 @@ examples:
             compatible = "ti,hdc3021", "ti,hdc3020";
             reg = <0x47>;
             vdd-supply = <&vcc_3v3>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
         };
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index 28b667a9cb76..c48a96d17f51 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -35,7 +35,9 @@ properties:
           - st,lsm6dsv
           - st,lsm6dso16is
       - items:
-          - const: st,asm330lhhx
+          - enum:
+              - st,asm330lhhx
+              - st,asm330lhhxg1
           - const: st,lsm6dsr
       - items:
           - const: st,lsm6dstx
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
index 0e8cd02759b3..062a038aa0ff 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
@@ -4,19 +4,22 @@
 $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor
 
 maintainers:
   - Christian Eggers <ceggers@arri.de>
 
 description: |
-  XYZ True Color Sensor with I2C Interface
+  AMS AS73211 XYZ True Color Sensor with I2C Interface
   https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+  AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface
+  https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf
 
 properties:
   compatible:
     enum:
       - ams,as73211
+      - ams,as7331
 
   reg:
     description:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
index abee04cd126e..91c318746bf3 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
@@ -21,6 +21,7 @@ properties:
 required:
   - compatible
   - reg
+  - vdd-supply
 
 additionalProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
new file mode 100644
index 000000000000..b6ab01a6914a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltafield AF8133J magnetometer sensor
+
+maintainers:
+  - Ondřej Jirman <megi@xff.cz>
+
+properties:
+  compatible:
+    const: voltafield,af8133j
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A signal for active low reset input of the sensor. (optional; if not
+      used, software reset over I2C will be used instead)
+
+  avdd-supply:
+    description:
+      A regulator that provides AVDD power (Working power, usually 3.3V) to
+      the sensor.
+
+  dvdd-supply:
+    description:
+      A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD)
+      to the sensor.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@1c {
+            compatible = "voltafield,af8133j";
+            reg = <0x1c>;
+            avdd-supply = <&reg_dldo1>;
+            dvdd-supply = <&reg_dldo1>;
+            reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
index 65a24ed67b3c..89977b9f01cf 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -99,6 +99,9 @@ required:
   - honeywell,transfer-function
   - honeywell,pressure-triplet
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
 additionalProperties: false
 
 dependentSchemas:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
index d9e903fbfd99..6994b30015bd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
 
 description: |
   Honeywell pressure sensor of model mprls0025pa.
 
-  This sensor has an I2C and SPI interface. Only the I2C interface is
-  implemented.
+  This sensor has an I2C and SPI interface.
 
   There are many models with different pressure ranges available. The vendor
   calls them "mpr series". All of them have the identical programming model and
   differ in the pressure range, unit and transfer function.
 
-  To support different models one need to specify the pressure range as well as
-  the transfer function. Pressure range needs to be converted from its unit to
-  pascal.
+  To support different models one need to specify its pressure triplet as well
+  as the transfer function.
+
+  For custom silicon chips not covered by the Honeywell MPR series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+  The minimal range value stands for the minimum pressure and the maximum value
+  also for the maximum pressure with linear relation inside the range.
 
   The transfer function defines the ranges of numerical values delivered by the
-  sensor. The minimal range value stands for the minimum pressure and the
-  maximum value also for the maximum pressure with linear relation inside the
-  range.
+  sensor.
 
   Specifications about the devices can be found at:
     https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
@@ -42,6 +45,10 @@ properties:
     maxItems: 1
 
   interrupts:
+    description:
+      Optional interrupt for indicating End-of-conversion.
+      If not present, the driver loops for a while until the received status
+      byte indicates correct measurement.
     maxItems: 1
 
   reset-gpios:
@@ -50,14 +57,6 @@ properties:
       If not present the device is not reset during the probe.
     maxItems: 1
 
-  honeywell,pmin-pascal:
-    description:
-      Minimum pressure value the sensor can measure in pascal.
-
-  honeywell,pmax-pascal:
-    description:
-      Maximum pressure value the sensor can measure in pascal.
-
   honeywell,transfer-function:
     description: |
       Transfer function which defines the range of valid values delivered by the
@@ -65,19 +64,57 @@ properties:
       1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
       2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
       3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    enum: [1, 2, 3]
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+
+  spi-max-frequency:
+    maximum: 800000
+
   vdd-supply:
     description: provide VDD power to the sensor.
 
 required:
   - compatible
   - reg
-  - honeywell,pmin-pascal
-  - honeywell,pmax-pascal
   - honeywell,transfer-function
   - vdd-supply
 
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
 additionalProperties: false
 
 examples:
@@ -93,10 +130,29 @@ examples:
             reg = <0x18>;
             reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
             interrupt-parent = <&gpio3>;
-            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
-            honeywell,pmin-pascal = <0>;
-            honeywell,pmax-pascal = <172369>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0025PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
             honeywell,transfer-function = <1>;
             vdd-supply = <&vcc_3v3>;
         };
     };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
index 8c6d7735e875..58aa1542776b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -24,9 +24,16 @@ properties:
   reg:
     maxItems: 1
 
+  vcc-supply:
+    description: provide VCC power to the sensor.
+
+  label:
+    description: Unique name to identify which device this is.
+
 required:
   - compatible
   - reg
+  - vcc-supply
 
 additionalProperties: false
 
@@ -39,5 +46,6 @@ examples:
         tmp117@48 {
              compatible = "ti,tmp117";
              reg = <0x48>;
+             vcc-supply = <&pmic_reg_3v3>;
         };
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5efceb313879..c384bf0bb25d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -49,7 +49,6 @@ patternProperties:
     $ref: input.yaml#
     properties:
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
       linux,code: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/atmel,captouch.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/atmel,captouch.txt
deleted file mode 100644
index fe9ee5c53bcc..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/atmel,captouch.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device tree bindings for Atmel capacitive touch device, typically
-an Atmel touch sensor connected to AtmegaXX MCU running firmware
-based on Qtouch library.
-
-The node for this device must be a child of a I2C controller node, as the
-device communicates via I2C.
-
-Required properties:
-
-	compatible:	Must be "atmel,captouch".
-	reg:		The I2C slave address of the device.
-	interrupts:	Property describing the interrupt line the device
-			is connected to. The device only has one interrupt
-			source.
-	linux,keycodes:	Specifies an array of numeric keycode values to
-			be used for reporting button presses. The array can
-			contain up to 8 entries.
-
-Optional properties:
-
-	autorepeat:	Enables the Linux input system's autorepeat
-			feature on the input device.
-
-Example:
-
-	atmel-captouch@51 {
-		compatible = "atmel,captouch";
-		reg = <0x51>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-		linux,keycodes = <BTN_0>, <BTN_1>,
-			<BTN_2>, <BTN_3>,
-			<BTN_4>, <BTN_5>,
-			<BTN_6>, <BTN_7>;
-		autorepeat;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/atmel,captouch.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/atmel,captouch.yaml
new file mode 100644
index 000000000000..f7477091d5a6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/atmel,captouch.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,captouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel capacitive touch device
+
+maintainers:
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  Atmel capacitive touch device, typically an Atmel touch sensor connected to
+  AtmegaXX MCU running firmware based on Qtouch library.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: atmel,captouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - linux,keycodes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touch@51 {
+        compatible = "atmel,captouch";
+        reg = <0x51>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+        linux,keycodes = <BTN_0>, <BTN_1>,
+                         <BTN_2>, <BTN_3>,
+                         <BTN_4>, <BTN_5>,
+                         <BTN_6>, <BTN_7>;
+        autorepeat;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/da9062-onkey.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/da9062-onkey.txt
deleted file mode 100644
index e5eef59a93dc..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/da9062-onkey.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Dialog DA9061/62/63 OnKey Module
-
-This module is part of the DA9061/DA9062/DA9063. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
-
-This module provides the KEY_POWER event.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-	"dlg,da9061-onkey", "dlg,da9062-onkey"
-	"dlg,da9062-onkey"
-	"dlg,da9063-onkey"
-
-Optional properties:
-
-- dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press when triggered using a long press of the OnKey.
-
-Example: DA9063
-
-	pmic0: da9063@58 {
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		onkey {
-			compatible = "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		onkey {
-			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
new file mode 100644
index 000000000000..1480d95421e1
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9061/62/63 OnKey Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062/DA9063. For more details about entire
+  DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  This module provides the KEY_POWER event.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dlg,da9062-onkey
+          - dlg,da9063-onkey
+      - items:
+          - const: dlg,da9061-onkey
+          - const: dlg,da9062-onkey
+
+  dlg,disable-key-power:
+    type: boolean
+    description:
+      Disable power-down using a long key-press. If this entry exists
+      the OnKey driver will remove support for the KEY_POWER key press
+      when triggered using a long press of the OnKey.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
new file mode 100644
index 000000000000..a53569aa0ee7
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series Keypad Controller
+
+description:
+  Samsung SoC Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-keypad
+      - samsung,s5pv210-keypad
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: keypad
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  linux,input-no-autorepeat:
+    type: boolean
+    description:
+      Do no enable autorepeat feature.
+
+  linux,input-wakeup:
+    type: boolean
+    deprecated: true
+
+  samsung,keypad-num-columns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of column lines connected to the keypad controller.
+
+  samsung,keypad-num-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of row lines connected to the keypad controller.
+
+patternProperties:
+  '^key-[0-9a-z]+$':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each key connected to the keypad controller is represented as a child
+      node to the keypad controller device node.
+
+    properties:
+      keypad,column:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The column number to which the key is connected.
+
+      keypad,row:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The row number to which the key is connected.
+
+      linux,code: true
+
+    required:
+      - keypad,column
+      - keypad,row
+      - linux,code
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - samsung,keypad-num-columns
+  - samsung,keypad-num-rows
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    keypad@100a0000 {
+        compatible = "samsung,s5pv210-keypad";
+        reg = <0x100a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_KEYIF>;
+        clock-names = "keypad";
+
+        samsung,keypad-num-rows = <2>;
+        samsung,keypad-num-columns = <8>;
+        linux,input-no-autorepeat;
+        wakeup-source;
+
+        key-1 {
+            keypad,row = <0>;
+            keypad,column = <3>;
+            linux,code = <2>;
+        };
+
+        key-2 {
+            keypad,row = <0>;
+            keypad,column = <4>;
+            linux,code = <3>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/samsung-keypad.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/samsung-keypad.txt
deleted file mode 100644
index 4c5c0a82586d..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung's Keypad Controller device tree bindings
-
-Samsung's Keypad controller is used to interface a SoC with a matrix-type
-keypad device. The keypad controller supports multiple row and column lines.
-A key can be placed at each intersection of a unique row and a unique column.
-The keypad controller can sense a key-press and key-release and report the
-event using a interrupt to the cpu.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
-    controller.
-  - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
-    controller.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- interrupts: The interrupt number to the cpu.
-
-Required Board Specific Properties:
-- samsung,keypad-num-rows: Number of row lines connected to the keypad
-  controller.
-
-- samsung,keypad-num-columns: Number of column lines connected to the
-  keypad controller.
-
-- Keys represented as child nodes: Each key connected to the keypad
-  controller is represented as a child node to the keypad controller
-  device node and should include the following properties.
-  - keypad,row: the row number to which the key is connected.
-  - keypad,column: the column number to which the key is connected.
-  - linux,code: the key-code to be reported when the key is pressed
-    and released.
-
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Optional Properties:
-- wakeup-source: use any event on keypad as wakeup event.
-		 (Legacy property supported: "linux,input-wakeup")
-
-Optional Properties specific to linux:
-- linux,keypad-no-autorepeat: do no enable autorepeat feature.
-
-
-Example:
-	keypad@100a0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <173>;
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,input-no-autorepeat;
-		wakeup-source;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_columns>;
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
new file mode 100644
index 000000000000..678756ad0f92
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6UL Touch Controller
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-tsc
+
+  reg:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  interrupts:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tsc
+      - const: adc
+
+  xnur-gpios:
+    maxItems: 1
+    description:
+      The X- gpio this controller connect to. This xnur-gpio returns to
+      low once the finger leave the touch screen (The last touch event
+      the touch controller capture).
+
+  measure-delay-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The value of measure delay time. Before X-axis or Y-axis measurement,
+      the screen need some time before even potential distribution ready.
+    default: 0xffff
+    minimum: 0
+    maximum: 0xffffff
+
+  pre-charge-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The touch screen need some time to precharge.
+    default: 0xfff
+    minimum: 0
+    maximum: 0xffffffff
+
+  touchscreen-average-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of data samples which are averaged for each read.
+    enum: [ 1, 4, 8, 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - xnur-gpios
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    touchscreen@2040000 {
+        compatible = "fsl,imx6ul-tsc";
+        reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6UL_CLK_IPG>,
+                 <&clks IMX6UL_CLK_ADC2>;
+        clock-names = "tsc", "adc";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_tsc>;
+        xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+        measure-delay-time = <0xfff>;
+        pre-charge-time = <0xffff>;
+        touchscreen-average-samples = <32>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
new file mode 100644
index 000000000000..d90f045ac06c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix Berlin series touchscreen controller
+
+description: The Goodix Berlin series of touchscreen controllers
+  be connected to either I2C or SPI buses.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt9916
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply regulator on AVDD pin
+
+  vddio-supply:
+    description: power supply regulator on VDDIO pin
+
+  spi-max-frequency: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@5d {
+        compatible = "goodix,gt9916";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      touchscreen@0 {
+        compatible = "goodix,gt9916";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        spi-max-frequency = <1000000>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index 3d016b87c8df..2a2d86cfd104 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -37,8 +37,9 @@ properties:
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
-      as output to reset the device.
+    description: GPIO pin used for IRQ input. Additionally, this line is
+      sampled by the device on reset deassertion to select the I2C client
+      address, thus it can be driven by the host during the reset sequence.
     maxItems: 1
 
   reset-gpios:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
index 0d6b033fd5fb..77ba280b3bdc 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -9,15 +9,14 @@ title: Imagis IST30XXC family touchscreen controller
 maintainers:
   - Markuss Broks <markuss.broks@gmail.com>
 
-allOf:
-  - $ref: touchscreen.yaml#
-
 properties:
   $nodename:
     pattern: "^touchscreen@[0-9a-f]+$"
 
   compatible:
     enum:
+      - imagis,ist3032c
+      - imagis,ist3038b
       - imagis,ist3038c
 
   reg:
@@ -32,6 +31,10 @@ properties:
   vddio-supply:
     description: Power supply regulator for the I2C bus
 
+  linux,keycodes:
+    description: Keycodes for the touch keys
+    maxItems: 5
+
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-fuzz-x: true
@@ -42,6 +45,18 @@ properties:
 
 additionalProperties: false
 
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: imagis,ist3032c
+    then:
+      properties:
+        linux,keycodes: false
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
deleted file mode 100644
index 164915004424..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale i.MX6UL Touch Controller
-
-Required properties:
-- compatible: must be "fsl,imx6ul-tsc".
-- reg: this touch controller address and the ADC2 address.
-- interrupts: the interrupt of this touch controller and ADC2.
-- clocks: the root clock of touch controller and ADC2.
-- clock-names; must be "tsc" and "adc".
-- xnur-gpio: the X- gpio this controller connect to.
-  This xnur-gpio returns to low once the finger leave the touch screen (The
-  last touch event the touch controller capture).
-
-Optional properties:
-- measure-delay-time: the value of measure delay time.
-  Before X-axis or Y-axis measurement, the screen need some time before
-  even potential distribution ready.
-  This value depends on the touch screen.
-- pre-charge-time: the touch screen need some time to precharge.
-  This value depends on the touch screen.
-- touchscreen-average-samples: Number of data samples which are averaged for
-  each read. Valid values are 1, 4, 8, 16 and 32.
-
-Example:
-	tsc: tsc@2040000 {
-		compatible = "fsl,imx6ul-tsc";
-		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6UL_CLK_IPG>,
-			 <&clks IMX6UL_CLK_ADC2>;
-		clock-names = "tsc", "adc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc>;
-		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		measure-delay-time = <0xfff>;
-		pre-charge-time = <0xffff>;
-		touchscreen-average-samples = <32>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
index 07f9dd6b1c9c..90ebd4f8354c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -17,13 +17,17 @@ properties:
     pattern: "^touchscreen(@.*)?$"
 
   compatible:
-    items:
+    oneOf:
       - enum:
           - melfas,mms114
           - melfas,mms134s
           - melfas,mms136
           - melfas,mms152
           - melfas,mms345l
+      - items:
+          - enum:
+              - melfas,mms252
+          - const: melfas,mms114
 
   reg:
     description: I2C address
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
index 95b554be25b4..5381a96f4949 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: >
       File basename for board specific firmware
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 08c1c6b9d7cf..5aaa92a7cef7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -23,6 +23,9 @@ properties:
 
   compatible:
     enum:
+      - qcom,msm8909-bimc
+      - qcom,msm8909-pcnoc
+      - qcom,msm8909-snoc
       - qcom,msm8916-bimc
       - qcom,msm8916-pcnoc
       - qcom,msm8916-snoc
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 74ab080249ff..9318b845ec35 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
-  - Odelu Kukatla <okukatla@codeaurora.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
 
 description: |
    RPMh interconnect providers support system bandwidth requirements through
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml
new file mode 100644
index 000000000000..b565d1a382f6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm7150-aggre1-noc
+      - qcom,sm7150-aggre2-noc
+      - qcom,sm7150-compute-noc
+      - qcom,sm7150-config-noc
+      - qcom,sm7150-dc-noc
+      - qcom,sm7150-gem-noc
+      - qcom,sm7150-mc-virt
+      - qcom,sm7150-mmss-noc
+      - qcom,sm7150-system-noc
+
+  reg:
+    maxItems: 1
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm7150-camnoc-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mc_virt: interconnect@1380000 {
+        compatible = "qcom,sm7150-mc-virt";
+        reg = <0x01380000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm7150-system-noc";
+        reg = <0x01620000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        camnoc_virt: interconnect-0 {
+            compatible = "qcom,sm7150-camnoc-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
index 3d06db98e978..a93744763787 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -36,6 +36,7 @@ properties:
               - amlogic,meson-a1-gpio-intc
               - amlogic,meson-s4-gpio-intc
               - amlogic,c3-gpio-intc
+              - amlogic,t7-gpio-intc
           - const: amlogic,meson-gpio-intc
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
deleted file mode 100644
index 7079d44bf3ba..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Advanced Interrupt Controller (AIC)
-
-Required properties:
-- compatible: Should be:
-    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
-      "sama5d3" or "sama5d4"
-    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
-
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
-  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-      Default flag for internal sources should be set to 4 (active high).
-  The third cell is used to specify the irq priority from 0 (lowest) to 7
-  (highest).
-- reg: Should contain AIC registers location and length
-- atmel,external-irqs: u32 array of external irqs.
-
-Examples:
-	/*
-	 * AIC
-	 */
-	aic: interrupt-controller@fffff000 {
-		compatible = "atmel,at91rm9200-aic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xfffff000 0x200>;
-	};
-
-	/*
-	 * An interrupt generating device that is wired to an AIC.
-	 */
-	dma: dma-controller@ffffec00 {
-		compatible = "atmel,at91sam9g45-dma";
-		reg = <0xffffec00 0x200>;
-		interrupts = <21 4 5>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml
new file mode 100644
index 000000000000..d4658fe3867c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advanced Interrupt Controller (AIC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Advanced Interrupt Controller (AIC) is an 8-level priority, individually
+  maskable, vectored interrupt controller providing handling of up to one
+  hundred and twenty-eight interrupt sources.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-aic
+      - atmel,sama5d2-aic
+      - atmel,sama5d3-aic
+      - atmel,sama5d4-aic
+      - microchip,sam9x60-aic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the IRQ number (Peripheral IDentifier on datasheet).
+      The 2nd cell specifies flags:
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+        Valid combinations: 1, 2, 3, 4, 8.
+        Default for internal sources: 4 (active high).
+      The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest).
+
+  interrupts:
+    maxItems: 1
+
+  atmel,external-irqs:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: u32 array of external irqs.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91rm9200-aic
+    then:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 7
+    else:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - atmel,external-irqs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@fffff000 {
+      compatible = "atmel,at91rm9200-aic";
+      reg = <0xfffff000 0x200>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      atmel,external-irqs = <31>;
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
index 985bfa4f6fda..78baa0a571cf 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -37,6 +37,9 @@ properties:
   clock-names:
     const: ipg
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
new file mode 100644
index 000000000000..e1a379c052e4
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mt6577-sysirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek sysirq
+
+description:
+  MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
+  interrupt.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-sysirq
+      - items:
+          - enum:
+              - mediatek,mt2701-sysirq
+              - mediatek,mt2712-sysirq
+              - mediatek,mt6580-sysirq
+              - mediatek,mt6582-sysirq
+              - mediatek,mt6589-sysirq
+              - mediatek,mt6592-sysirq
+              - mediatek,mt6755-sysirq
+              - mediatek,mt6765-sysirq
+              - mediatek,mt6779-sysirq
+              - mediatek,mt6795-sysirq
+              - mediatek,mt6797-sysirq
+              - mediatek,mt7622-sysirq
+              - mediatek,mt7623-sysirq
+              - mediatek,mt7629-sysirq
+              - mediatek,mt8127-sysirq
+              - mediatek,mt8135-sysirq
+              - mediatek,mt8173-sysirq
+              - mediatek,mt8183-sysirq
+              - mediatek,mt8365-sysirq
+              - mediatek,mt8516-sysirq
+          - const: mediatek,mt6577-sysirq
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    $ref: "arm,gic.yaml#/properties/#interrupt-cells"
+
+required:
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6797-sysirq
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@10200620 {
+        compatible = "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq";
+        reg = <0x10220620 0x20>,
+              <0x10220690 0x10>;
+        interrupt-parent = <&gic>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
deleted file mode 100644
index 3ffc60184e44..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-MediaTek sysirq
-
-MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
-interrupt.
-
-Required properties:
-- compatible: should be
-	"mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
-	"mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
-	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
-	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
-	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
-	"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
-	"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
-	"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
-	"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
-	"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
-	"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
-	"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
-	"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
-	"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
-	"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
-	"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
-	"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
-	"mediatek,mt6577-sysirq": for MT6577
-	"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
-	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
-	"mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the intpol registers and length of memory
-  mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
-  need 1.
-
-Example:
-	sysirq: intpol-controller@10200620 {
-		compatible = "mediatek,mt6797-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10220620 0 0x20>,
-		      <0 0x10220690 0 0x10>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index d3b5aec0a3f7..daef4ee06f4e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -44,7 +44,7 @@ properties:
     maxItems: 1
 
   interrupts:
-    minItems: 41
+    minItems: 45
     items:
       - description: NMI interrupt
       - description: IRQ0 interrupt
@@ -88,9 +88,15 @@ properties:
       - description: GPIO interrupt, TINT30
       - description: GPIO interrupt, TINT31
       - description: Bus error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt
+      - description: ECCRAM1 1bit error interrupt
+      - description: ECCRAM1 2bit error interrupt
+      - description: ECCRAM1 error overflow interrupt
 
   interrupt-names:
-    minItems: 41
+    minItems: 45
     items:
       - const: nmi
       - const: irq0
@@ -134,6 +140,12 @@ properties:
       - const: tint30
       - const: tint31
       - const: bus-err
+      - const: ec7tie1-0
+      - const: ec7tie2-0
+      - const: ec7tiovf-0
+      - const: ec7tie1-1
+      - const: ec7tie2-1
+      - const: ec7tiovf-1
 
   clocks:
     maxItems: 2
@@ -156,6 +168,7 @@ required:
   - interrupt-controller
   - reg
   - interrupts
+  - interrupt-names
   - clocks
   - clock-names
   - power-domains
@@ -169,16 +182,19 @@ allOf:
         compatible:
           contains:
             enum:
-              - renesas,r9a07g043u-irqc
               - renesas,r9a08g045-irqc
     then:
       properties:
         interrupts:
-          minItems: 42
+          maxItems: 45
         interrupt-names:
-          minItems: 42
-      required:
-        - interrupt-names
+          maxItems: 45
+    else:
+      properties:
+        interrupts:
+          minItems: 48
+        interrupt-names:
+          minItems: 48
 
 unevaluatedProperties: false
 
@@ -233,7 +249,14 @@ examples:
                      <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
         interrupt-names = "nmi",
                           "irq0", "irq1", "irq2", "irq3",
                           "irq4", "irq5", "irq6", "irq7",
@@ -244,7 +267,10 @@ examples:
                           "tint16", "tint17", "tint18", "tint19",
                           "tint20", "tint21", "tint22", "tint23",
                           "tint24", "tint25", "tint26", "tint27",
-                          "tint28", "tint29", "tint30", "tint31";
+                          "tint28", "tint29", "tint30", "tint31",
+                          "bus-err", "ec7tie1-0", "ec7tie2-0",
+                          "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+                          "ec7tiovf-1";
         clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
                  <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
         clock-names = "clk", "pclk";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
new file mode 100644
index 000000000000..ada5788602d6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/starfive,jh8100-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive External Interrupt Controller
+
+description:
+  StarFive SoC JH8100 contain a external interrupt controller. It can be used
+  to handle high-level input interrupt signals. It also send the output
+  interrupt signal to RISC-V PLIC.
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh8100-intc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: APB clock for the interrupt controller
+    maxItems: 1
+
+  resets:
+    description: APB reset for the interrupt controller
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@12260000 {
+      compatible = "starfive,jh8100-intc";
+      reg = <0x12260000 0x10000>;
+      clocks = <&syscrg_ne 76>;
+      resets = <&syscrg_ne 13>;
+      interrupts = <45>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index a4042ae24770..5c130cf06a21 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -83,6 +83,7 @@ properties:
       - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
+              - qcom,qcm2290-smmu-500
               - qcom,sa8775p-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8280xp-smmu-500
@@ -93,6 +94,7 @@ properties:
               - qcom,sm8350-smmu-500
               - qcom,sm8450-smmu-500
               - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
           - const: qcom,adreno-smmu
           - const: qcom,smmu-500
           - const: arm,mmu-500
@@ -462,6 +464,7 @@ allOf:
         compatible:
           items:
             - enum:
+                - qcom,qcm2290-smmu-500
                 - qcom,sm6115-smmu-500
                 - qcom,sm6125-smmu-500
             - const: qcom,adreno-smmu
@@ -484,7 +487,12 @@ allOf:
   - if:
       properties:
         compatible:
-          const: qcom,sm8450-smmu-500
+          items:
+            - const: qcom,sm8450-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+
     then:
       properties:
         clock-names:
@@ -508,7 +516,13 @@ allOf:
   - if:
       properties:
         compatible:
-          const: qcom,sm8550-smmu-500
+          items:
+            - enum:
+                - qcom,sm8550-smmu-500
+                - qcom,sm8650-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
     then:
       properties:
         clock-names:
@@ -534,7 +548,6 @@ allOf:
               - cavium,smmu-v2
               - marvell,ap806-smmu-500
               - nvidia,smmu-500
-              - qcom,qcm2290-smmu-500
               - qcom,qdu1000-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc8180x-smmu-500
@@ -544,7 +557,6 @@ allOf:
               - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
-              - qcom,sm8650-smmu-500
               - qcom,x1e80100-smmu-500
     then:
       properties:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
new file mode 100644
index 000000000000..b005065e0f48
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD2801 one-wire backlight
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The Kinetic Technologies KTD2801 is a LED backlight driver controlled
+  by a single GPIO line. The driver can be controlled with a PWM signal
+  or by pulsing the GPIO line to set the backlight level. This is called
+  "ExpressWire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd2801
+
+  ctrl-gpios:
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktd2801";
+        ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+        max-brightness = <210>;
+        default-brightness = <100>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index 5f1849bdabba..a8490781011d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Kiran Gunda <kgunda@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
+  - Kiran Gunda <quic_kgunda@quicinc.com>
 
 description: |
   WLED (White Light Emitting Diode) driver is used for controlling display
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/common.yaml
index 55a8d1385e21..8a3c2398b10c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/common.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/common.yaml
@@ -200,6 +200,18 @@ properties:
       #trigger-source-cells property in the source node.
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  active-low:
+    type: boolean
+    description:
+      Makes LED active low. To turn the LED ON, line needs to be
+      set to low voltage instead of high.
+
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
index 52252fb6bb32..bb20394fca5c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -52,10 +52,6 @@ patternProperties:
         maxItems: 1
         description: LED pin number
 
-      active-low:
-        type: boolean
-        description: Makes LED active low
-
     required:
       - reg
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
index 51cc0d82c12e..f3a3ef992929 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -78,10 +78,6 @@ patternProperties:
           - maximum: 23
         description: LED pin number (only LEDs 0 to 23 are valid).
 
-      active-low:
-        type: boolean
-        description: Makes LED active low.
-
       brcm,hardware-controlled:
         type: boolean
         description: Makes this LED hardware controlled.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-bcm6358.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index 6e51c6b91ee5..211ffc3c4a20 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@ LED sub-node required properties:
 
 LED sub-node optional properties:
   - label : see Documentation/devicetree/bindings/leds/common.txt
-  - active-low : Boolean, makes LED active low.
-    Default : false
   - default-state : see
     Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index bd6ec04a8727..a31a202afe5c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -41,9 +41,7 @@ properties:
 
           pwm-names: true
 
-          active-low:
-            description: For PWMs where the LED is wired to supply rather than ground.
-            type: boolean
+          active-low: true
 
           color: true
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-pwm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index 7de6da58be3c..113b7c218303 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -34,11 +34,6 @@ patternProperties:
           Maximum brightness possible for the LED
         $ref: /schemas/types.yaml#/definitions/uint32
 
-      active-low:
-        description:
-          For PWMs where the LED is wired to supply rather than ground.
-        type: boolean
-
     required:
       - pwms
       - max-brightness
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index ea84ad426df1..54a428d3d46f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: >
   The Qualcomm Light Pulse Generator consists of three different hardware blocks;
-  a ramp generator with lookup table, the light pulse generator and a three
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
   channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
 
 properties:
@@ -63,6 +63,29 @@ properties:
         - description: dtest line to attach
         - description: flags for the attachment
 
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    items:
+      - const: lpg_chan_sdam
+      - const: lut_sdam
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
   multi-led:
     type: object
     $ref: leds-class-multicolor.yaml#
@@ -106,6 +129,52 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-lpg
+              - qcom,pm8150b-lpg
+              - qcom,pm8150l-lpg
+              - qcom,pm8916-pwm
+              - qcom,pm8941-lpg
+              - qcom,pm8994-lpg
+              - qcom,pmc8180c-lpg
+              - qcom,pmi8994-lpg
+              - qcom,pmi8998-lpg
+              - qcom,pmk8550-pwm
+    then:
+      properties:
+        nvmem: false
+        nvmem-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          minItems: 2
+
 examples:
   - |
     #include <dt-bindings/leds/common.h>
@@ -191,4 +260,35 @@ examples:
       compatible = "qcom,pm8916-pwm";
       #pwm-cells = <2>;
     };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
+
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
new file mode 100644
index 000000000000..9c9f3a682ba2
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NCP5623 multi-LED Driver
+
+maintainers:
+  - Abdel Alkuor <alkuor@gmail.com>
+
+description:
+  NCP5623 Triple Output I2C Controlled LED Driver.
+  https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+
+properties:
+  compatible:
+    enum:
+      - onnn,ncp5623
+
+  reg:
+    const: 0x38
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 2
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - multi-led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+            compatible = "onnn,ncp5623";
+            reg = <0x38>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index 12e7a7d536a3..00631afcd51d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -29,8 +29,11 @@ properties:
       - const: fsl,imx8ulp-mu
       - const: fsl,imx8-mu-scu
       - const: fsl,imx8-mu-seco
-      - const: fsl,imx93-mu-s4
       - const: fsl,imx8ulp-mu-s4
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx95-mu
+      - const: fsl,imx95-mu-ele
+      - const: fsl,imx95-mu-v2x
       - items:
           - const: fsl,imx93-mu
           - const: fsl,imx8ulp-mu
@@ -95,6 +98,19 @@ properties:
   power-domains:
     maxItems: 1
 
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^sram@[a-f0-9]+":
+    $ref: /schemas/sram/sram.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -122,6 +138,15 @@ allOf:
         required:
           - interrupt-names
 
+  - if:
+      not:
+        properties:
+          compatible:
+            const: fsl,imx95-mu
+    then:
+      patternProperties:
+        "^sram@[a-f0-9]+": false
+
 additionalProperties: false
 
 examples:
@@ -134,3 +159,34 @@ examples:
         interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
         #mbox-cells = <2>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@445b0000 {
+        compatible = "fsl,imx95-mu";
+        reg = <0x445b0000 0x10000>;
+        ranges;
+        interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #mbox-cells = <2>;
+
+        sram@445b1000 {
+            compatible = "mmio-sram";
+            reg = <0x445b1000 0x400>;
+            ranges = <0x0 0x445b1000 0x400>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            scmi-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+
+            scmi-sram-section@80 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x80 0x80>;
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
index e37317f81072..c9673391afdb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
@@ -36,7 +36,7 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: Analog input port
 
         properties:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index a2051b31fa29..b45743d0a9ec 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -16,14 +16,18 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8173-vcodec-enc-vp8
-      - mediatek,mt8173-vcodec-enc
-      - mediatek,mt8183-vcodec-enc
-      - mediatek,mt8188-vcodec-enc
-      - mediatek,mt8192-vcodec-enc
-      - mediatek,mt8195-vcodec-enc
-
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+      - items:
+          - const: mediatek,mt8186-vcodec-enc
+          - const: mediatek,mt8183-vcodec-enc
   reg:
     maxItems: 1
 
@@ -109,10 +113,7 @@ allOf:
       properties:
         compatible:
           enum:
-            - mediatek,mt8173-vcodec-enc
-            - mediatek,mt8188-vcodec-enc
-            - mediatek,mt8192-vcodec-enc
-            - mediatek,mt8195-vcodec-enc
+            - mediatek,mt8173-vcodec-enc-vp8
 
     then:
       properties:
@@ -122,8 +123,8 @@ allOf:
             maxItems: 1
         clock-names:
           items:
-            - const: venc_sel
-    else:  # for vp8 hw encoder
+            - const: venc_lt_sel
+    else:
       properties:
         clock:
           items:
@@ -131,7 +132,7 @@ allOf:
             maxItems: 1
         clock-names:
           items:
-            - const: venc_lt_sel
+            - const: venc_sel
 
 additionalProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index 37800e1908cc..83c020a673d6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -38,7 +38,8 @@ properties:
     maxItems: 1
 
   iommus:
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
     description: |
       Points to the respective IOMMU block with master port as argument, see
       Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index afcaa427d48b..6be00aca4181 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx8mp-isp
       - rockchip,px30-cif-isp
       - rockchip,rk3399-cif-isp
 
@@ -36,9 +37,9 @@ properties:
     minItems: 3
     items:
       # isp0 and isp1
-      - description: ISP clock
-      - description: ISP AXI clock
-      - description: ISP AHB clock
+      - description: ISP clock (for imx8mp, clk)
+      - description: ISP AXI clock (for imx8mp, m_hclk)
+      - description: ISP AHB clock (for imx8mp, hclk)
       # only for isp1
       - description: ISP Pixel clock
 
@@ -52,6 +53,13 @@ properties:
       # only for isp1
       - const: pclk
 
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to the media block control for the ISP, followed by a cell
+      containing the index of the gasket.
+
   iommus:
     maxItems: 1
 
@@ -113,9 +121,6 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - iommus
-  - phys
-  - phy-names
   - power-domains
   - ports
 
@@ -143,6 +148,26 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isp
+    then:
+      properties:
+        iommus: false
+        phys: false
+        phy-names: false
+      required:
+        - fsl,blk-ctrl
+    else:
+      properties:
+        fsl,blk-ctrl: false
+      required:
+        - iommus
+        - phys
+        - phy-names
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
new file mode 100644
index 000000000000..b8611bc8756c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+
+description:
+  The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware
+  decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1)
+  and a VENC video hardware encoder peripheral based on Verisilicon
+  VC8000NanoE IP (former Hantro H1).
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-vdec
+      - st,stm32mp25-venc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    video-codec@580d0000 {
+        compatible = "st,stm32mp25-vdec";
+        reg = <0x580d0000 0x3c8>;
+        interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ck_icn_p_vdec>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
new file mode 100644
index 000000000000..82fc5f4a1ed6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX WEIM Bus Peripheral Nodes
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This binding is meant for the child nodes of the WEIM node. The node
+  represents any device connected to the WEIM bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the WEIM settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+  fsl,weim-cs-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Timing values for the child node.
+    minItems: 2
+    maxItems: 6
+
+# the WEIM child will have its own native properties
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim.yaml
new file mode 100644
index 000000000000..3f40ca5b13f6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX Wireless External Interface Module (WEIM)
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  The term "wireless" does not imply that the WEIM is literally an interface
+  without wires. It simply means that this module was originally designed for
+  wireless and mobile applications that use low-power technology. The actual
+  devices are instantiated from the child nodes of a WEIM node.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-weim
+          - fsl,imx27-weim
+          - fsl,imx50-weim
+          - fsl,imx51-weim
+          - fsl,imx6q-weim
+      - items:
+          - enum:
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+          - const: fsl,imx27-weim
+      - items:
+          - enum:
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+          - const: fsl,imx6q-weim
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+  fsl,weim-cs-gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system General Purpose Register controller that contains
+      WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
+      should be set up as one of the following 4 possible values depending on
+      the CS space configuration.
+
+      IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+      ---------------------------------------------
+              05          128M     0M     0M     0M
+              033          64M    64M     0M     0M
+              0113         64M    32M    32M     0M
+              01111        32M    32M    32M    32M
+
+      In case that the property is absent, the reset value or what bootloader
+      sets up in IOMUXC_GPR1[11:0] will be used.
+
+  fsl,burst-clk-enable:
+    type: boolean
+    description:
+      The presence of this property indicates that the weim bus should operate
+      in Burst Clock Mode.
+
+  fsl,continuous-burst-clk:
+    type: boolean
+    description:
+      Make Burst Clock to output continuous clock. Without this option Burst
+      Clock will output clock only when necessary.
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    type: object
+    description: Devices attached to chip selects are represented as subnodes.
+    $ref: fsl,imx-weim-peripherals.yaml
+    additionalProperties: true
+    required:
+      - fsl,weim-cs-timing
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx50-weim
+                - fsl,imx6q-weim
+    then:
+      properties:
+        fsl,weim-cs-gpr: false
+        fsl,burst-clk-enable: false
+  - if:
+      not:
+        required:
+          - fsl,burst-clk-enable
+    then:
+      properties:
+        fsl,continuous-burst-clk: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx1-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSxU
+                  - description: CSxL
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx27-weim
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSCRxU
+                  - description: CSCRxL
+                  - description: CSCRxA
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx50-weim
+              - fsl,imx51-weim
+              - fsl,imx6q-weim
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSxGCR1
+                  - description: CSxGCR2
+                  - description: CSxRCR1
+                  - description: CSxRCR2
+                  - description: CSxWCR1
+                  - description: CSxWCR2
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@21b8000 {
+        compatible = "fsl,imx6q-weim";
+        reg = <0x021b8000 0x4000>;
+        clocks = <&clks 196>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x08000000 0x08000000>;
+        fsl,weim-cs-gpr = <&gpr>;
+
+        flash@0,0 {
+            compatible = "cfi-flash";
+            reg = <0 0 0x02000000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            bank-width = <2>;
+            fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+                                  0x0000c000 0x1404a38e 0x00000000>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
index 8d9dae15ade0..00deeb09f87d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -37,5 +37,6 @@ allOf:
   - $ref: ingenic,nemc-peripherals.yaml#
   - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
   - $ref: ti,gpmc-child.yaml#
+  - $ref: fsl/fsl,imx-weim-peripherals.yaml
 
 additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index f54e553e6c0e..71896cb10692 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -145,7 +145,7 @@ patternProperties:
   "^emc-table@[0-9]+$":
     $ref: "#/$defs/emc-table"
 
-  "^emc-tables@[a-z0-9-]+$":
+  "^emc-tables@[a-f0-9-]+$":
     type: object
     properties:
       reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index 25f3bb9890ae..d7745dd53b51 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -45,6 +45,7 @@ properties:
       - items:
           - enum:
               - renesas,r8a779g0-rpc-if       # R-Car V4H
+              - renesas,r8a779h0-rpc-if       # R-Car V4M
           - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
 
       - items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 14f1833d37c9..84ac6f50a6fc 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -23,7 +23,9 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32mp1-fmc2-ebi
+    enum:
+      - st,stm32mp1-fmc2-ebi
+      - st,stm32mp25-fmc2-ebi
 
   reg:
     maxItems: 1
@@ -34,6 +36,9 @@ properties:
   resets:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   "#address-cells":
     const: 2
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 000000000000..4aa36903e755
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 000000000000..0dc6a40b63f4
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sam9x7-flexcom
+          - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sama7g5-flexcom
+          - const: atmel,sama5d2-flexcom
+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index af692e8833a5..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
-			or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
-- reg:			Should be the offset/length value for Flexcom dedicated
-			I/O registers (without USART, TWI or SPI registers).
-- clocks:		Should be the Flexcom peripheral clock from PMC.
-- #address-cells:	Should be <1>
-- #size-cells:		Should be <1>
-- ranges:		Should be one range for the full I/O register region
-			(including USART, TWI and SPI registers).
-- atmel,flexcom-mode:	Should be one of the following values:
-			- <1> for USART
-			- <2> for SPI
-			- <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
-	compatible = "atmel,sama5d2-flexcom";
-	reg = <0xf8034000 0x200>;
-	clocks = <&flx0_clk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0xf8034000 0x800>;
-	atmel,flexcom-mode = <2>;
-
-	spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&flx0_clk>;
-		clock-names = "spi_clk";
-		atmel,fifo-size = <32>;
-
-		flash@0 {
-			compatible = "atmel,at25f512b";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 7de696eefaed..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,at91sam9n12-hlcdc"
-   "atmel,at91sam9x5-hlcdc"
-   "atmel,sama5d2-hlcdc"
-   "atmel,sama5d3-hlcdc"
-   "atmel,sama5d4-hlcdc"
-   "microchip,sam9x60-hlcdc"
-   "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
-   Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/da9062.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/da9062.txt
deleted file mode 100644
index e4eedd3bd233..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-wdt.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
index c5a7e10d7d80..51612dc22748 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -17,10 +17,17 @@ description: |
   moment where all voltage monitors are disabled. Next, as da9063 only supports
   UV *and* OV monitoring, both must be set to the same severity and value
   (0: disable, 1: enable).
+  Product information for the DA906{3L,3,2,1} devices can be found here:
+  - https://www.dialog-semiconductor.com/products/da9063l
+  - https://www.dialog-semiconductor.com/products/da9063
+  - https://www.dialog-semiconductor.com/products/da9062
+  - https://www.dialog-semiconductor.com/products/da9061
 
 properties:
   compatible:
     enum:
+      - dlg,da9061
+      - dlg,da9062
       - dlg,da9063
       - dlg,da9063l
 
@@ -35,20 +42,28 @@ properties:
   "#interrupt-cells":
     const: 2
 
-  dlg,use-sw-pm:
-    type: boolean
-    description:
-      Disable the watchdog during suspend.
-      Only use this option if you can't use the watchdog automatic suspend
-      function during a suspend (see register CONTROL_B).
+  gpio-controller: true
 
-  watchdog:
+  "#gpio-cells":
+    const: 2
+
+  gpio:
     type: object
-    $ref: /schemas/watchdog/watchdog.yaml#
-    unevaluatedProperties: false
+    additionalProperties: false
     properties:
       compatible:
-        const: dlg,da9063-watchdog
+        const: dlg,da9062-gpio
+
+  onkey:
+    $ref: /schemas/input/dlg,da9062-onkey.yaml
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
 
   rtc:
     type: object
@@ -56,37 +71,86 @@ properties:
     unevaluatedProperties: false
     properties:
       compatible:
-        const: dlg,da9063-rtc
+        enum:
+          - dlg,da9062-rtc
+          - dlg,da9063-rtc
 
-  onkey:
-    type: object
-    $ref: /schemas/input/input.yaml#
-    unevaluatedProperties: false
-    properties:
-      compatible:
-        const: dlg,da9063-onkey
+  thermal:
+    $ref: /schemas/thermal/dlg,da9062-thermal.yaml
 
-      dlg,disable-key-power:
-        type: boolean
-        description: |
-          Disable power-down using a long key-press.
-          If this entry does not exist then by default the key-press triggered
-          power down is enabled and the OnKey will support both KEY_POWER and
-          KEY_SLEEP.
+  watchdog:
+    $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
 
-  regulators:
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
     type: object
-    additionalProperties: false
-    patternProperties:
-      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
-        $ref: /schemas/regulator/regulator.yaml
-        unevaluatedProperties: false
+
+    required:
+      - gpio-hog
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9063
+              - dlg,da9063l
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^buck[1-4]$": false
+        thermal: false
+      required:
+        - interrupts
+        - interrupt-controller
+        - '#interrupt-cells'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9062
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+      required:
+        - gpio
+        - onkey
+        - rtc
+        - thermal
+        - watchdog
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9061
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+        rtc: false
+      required:
+        - onkey
+        - thermal
+        - watchdog
 
 additionalProperties: false
 
@@ -99,10 +163,10 @@ examples:
       pmic@58 {
         compatible = "dlg,da9063";
         reg = <0x58>;
-        #interrupt-cells = <2>;
         interrupt-parent = <&gpio6>;
         interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         interrupt-controller;
+        #interrupt-cells = <2>;
 
         rtc {
           compatible = "dlg,da9063-rtc";
@@ -143,4 +207,121 @@ examples:
         };
       };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9062";
+        reg = <0x58>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        sd0-pwr-sel-hog {
+          gpio-hog;
+          gpios = <1 0>;
+          input;
+          line-name = "SD0_PWR_SEL";
+        };
+
+        sd1-pwr-sel-hog {
+          gpio-hog;
+          gpios = <2 0>;
+          input;
+          line-name = "SD1_PWR_SEL";
+        };
+
+        sw-et0-en-hog {
+          gpio-hog;
+          gpios = <3 0>;
+          input;
+          line-name = "SW_ET0_EN#";
+        };
+
+        pmic-good-hog {
+          gpio-hog;
+          gpios = <4 0>;
+          output-high;
+          line-name = "PMIC_PGOOD";
+        };
+
+        gpio {
+          compatible = "dlg,da9062-gpio";
+        };
+
+        onkey {
+          compatible = "dlg,da9062-onkey";
+        };
+
+        regulators {
+          buck1 {
+            regulator-name = "vdd_arm";
+            regulator-min-microvolt = <925000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck2 {
+            regulator-name = "vdd_soc";
+            regulator-min-microvolt = <1150000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "vdd_ddr3";
+            regulator-min-microvolt = <1500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "vdd_eth";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          ldo1 {
+            regulator-name = "vdd_snvs";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo2 {
+            regulator-name = "vdd_high";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo3 {
+            regulator-name = "vdd_eth_io";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+          ldo4 {
+            regulator-name = "vdd_emmc";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+
+        rtc {
+          compatible = "dlg,da9062-rtc";
+        };
+
+        thermal {
+          compatible = "dlg,da9062-thermal";
+        };
+
+        watchdog {
+          compatible = "dlg,da9062-watchdog";
+          dlg,use-sw-pm;
+        };
+      };
+    };
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index e1ca4f297c6d..aac8819bd00b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -93,6 +93,11 @@ properties:
   '#size-cells':
     const: 0
 
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
   typec:
     $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
@@ -275,6 +280,8 @@ examples:
             interrupts = <99 0>;
             interrupt-parent = <&gpio7>;
             spi-max-frequency = <5000000>;
+            #gpio-cells = <2>;
+            gpio-controller;
 
             proximity {
                 compatible = "google,cros-ec-mkbp-proximity";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml
index 799accb11deb..e2acec66a688 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Specifies the name of the calibration and configuration file selected by
       the driver. If this property is omitted, the name is chosen based on the
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 798705ab6a46..b97d77015335 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,msm8976-tcsr
           - qcom,msm8998-tcsr
+          - qcom,qcm2290-tcsr
           - qcom,qcs404-tcsr
           - qcom,sc7180-tcsr
           - qcom,sc7280-tcsr
@@ -28,6 +29,7 @@ properties:
           - qcom,sdx55-tcsr
           - qcom,sdx65-tcsr
           - qcom,sm4450-tcsr
+          - qcom,sm6115-tcsr
           - qcom,sm8150-tcsr
           - qcom,sm8250-tcsr
           - qcom,sm8350-tcsr
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
index 084b5c2a2a3c..9d55bee155ce 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -72,7 +72,10 @@ properties:
               - rockchip,rk3588-qos
               - rockchip,rv1126-qos
               - starfive,jh7100-sysmain
+              - ti,am62-usb-phy-ctrl
               - ti,am654-dss-oldi-io-ctrl
+              - ti,am654-serdes-ctrl
+              - ti,j784s4-pcie-ctrl
 
           - const: syscon
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/ti,twl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index c04d57ba22b4..52ed228fb1e7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -34,6 +34,8 @@ properties:
 
   interrupt-controller: true
 
+  system-power-controller: true
+
   "#interrupt-cells":
     const: 1
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mips/cpus.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mips/cpus.yaml
index cf382dea3922..a85137add668 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mips/cpus.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mips/cpus.yaml
@@ -23,22 +23,23 @@ properties:
       - brcm,bmips4380
       - brcm,bmips5000
       - brcm,bmips5200
-      - ingenic,xburst-mxu1.0
+      - img,i6500
       - ingenic,xburst-fpu1.0-mxu1.1
       - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst-mxu1.0
       - ingenic,xburst2-fpu2.1-mxu2.1-smt
       - loongson,gs264
       - mips,m14Kc
-      - mips,mips4Kc
-      - mips,mips4KEc
-      - mips,mips24Kc
+      - mips,mips1004Kc
       - mips,mips24KEc
+      - mips,mips24Kc
+      - mips,mips4KEc
+      - mips,mips4Kc
       - mips,mips74Kc
-      - mips,mips1004Kc
       - mti,interaptiv
-      - mti,mips24KEc
       - mti,mips14KEc
       - mti,mips14Kc
+      - mti,mips24KEc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mips/mobileye.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mips/mobileye.yaml
new file mode 100644
index 000000000000..831975f6b479
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mips/mobileye.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2023 Mobileye Vision Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/mobileye.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye SoC series
+
+maintainers:
+  - Vladimir Kondratiev <vladimir.kondratiev@intel.com>
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+
+description:
+  Boards with a Mobileye SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Boards with Mobileye EyeQ5 SoC
+        items:
+          - enum:
+              - mobileye,eyeq5-epm5
+          - const: mobileye,eyeq5
+
+additionalProperties: true
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
index 2dc3e245fa5d..c27a8f33d8d7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -77,6 +77,8 @@ patternProperties:
       reg:
         maxItems: 1
 
+      dma-coherent: true
+
       iommus:
         minItems: 1
         maxItems: 3
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
deleted file mode 100644
index e3289634fa30..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Xilinx SDFEC(16nm) IP *
-
-The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
-which provides high-throughput LDPC and Turbo Code implementations.
-The LDPC decode & encode functionality is capable of covering a range of
-customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
-principally covers codes used by LTE. The FEC Engine offers significant
-power and area savings versus implementations done in the FPGA fabric.
-
-
-Required properties:
-- compatible: Must be "xlnx,sd-fec-1.1"
-- clock-names : List of input clock names from the following:
-    - "core_clk", Main processing clock for processing core (required)
-    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
-    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
-    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
-    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
-    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
-    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
-    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
-- clocks : Clock phandles (see clock_bindings.txt for details).
-- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
-  location and length.
-- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
-  being used.
-- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DIN_WORDS to be block based, while a value of 2 configures the
-  DIN_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DOUT_WORDS to be block based, while a value of 2 configures the
-  DOUT_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-Optional properties:
-- interrupts: should contain SDFEC interrupt number
-
-Example
----------------------------------------
-	sd_fec_0: sd-fec@a0040000 {
-		compatible = "xlnx,sd-fec-1.1";
-		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
-		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
-		reg = <0x0 0xa0040000 0x0 0x40000>;
-		interrupt-parent = <&axi_intc>;
-		interrupts = <1 0>;
-		xlnx,sdfec-code = "ldpc";
-		xlnx,sdfec-din-words = <0>;
-		xlnx,sdfec-din-width = <2>;
-		xlnx,sdfec-dout-words = <0>;
-		xlnx,sdfec-dout-width = <1>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
new file mode 100644
index 000000000000..9bd210337426
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SDFEC(16nm) IP
+
+maintainers:
+  - Cvetic, Dragan <dragan.cvetic@amd.com>
+  - Erim, Salih <salih.erim@amd.com>
+
+description:
+  The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+  which provides high-throughput LDPC and Turbo Code implementations.
+  The LDPC decode & encode functionality is capable of covering a range of
+  customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+  principally covers codes used by LTE. The FEC Engine offers significant
+  power and area savings versus implementations done in the FPGA fabric.
+
+properties:
+  compatible:
+    const: xlnx,sd-fec-1.1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 8
+    additionalItems: true
+    items:
+      - description: Main processing clock for processing core
+      - description: AXI4-Lite memory-mapped slave interface clock
+      - description: Control input AXI4-Stream Slave interface clock
+      - description: DIN AXI4-Stream Slave interface clock
+      - description: Status output AXI4-Stream Master interface clock
+      - description: DOUT AXI4-Stream Master interface clock
+      - description: DIN_WORDS AXI4-Stream Slave interface clock
+      - description: DOUT_WORDS AXI4-Stream Master interface clock
+
+  clock-names:
+    allOf:
+      - minItems: 2
+        maxItems: 8
+        additionalItems: true
+        items:
+          - const: core_clk
+          - const: s_axi_aclk
+      - items:
+          enum:
+            - core_clk
+            - s_axi_aclk
+            - s_axis_ctrl_aclk
+            - s_axis_din_aclk
+            - m_axis_status_aclk
+            - m_axis_dout_aclk
+            - s_axis_din_words_aclk
+            - m_axis_dout_words_aclk
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,sdfec-code:
+    description:
+      The SD-FEC integrated block supports Low Density Parity Check (LDPC)
+      decoding and encoding and Turbo code decoding. The LDPC codes used are
+      highly configurable, and the specific code used can be specified on
+      a codeword-by-codeword basis. The Turbo code decoding is required by LTE
+      standard.
+    $ref: /schemas/types.yaml#/definitions/string
+    items:
+      enum: [ ldpc, turbo ]
+
+  xlnx,sdfec-din-width:
+    description:
+      Configures the DIN AXI stream where a value of 1
+      configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+      of "4x128b".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  xlnx,sdfec-din-words:
+    description:
+      A value 0 indicates that the DIN_WORDS interface is
+      driven with a fixed value and is not present on the device, a value of 1
+      configures the DIN_WORDS to be block based, while a value of 2 configures the
+      DIN_WORDS input to be supplied for each AXI transaction.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  xlnx,sdfec-dout-width:
+    description:
+      Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b",
+      2 a width of "2x128b" and 4 configures a width of "4x128b".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  xlnx,sdfec-dout-words:
+    description:
+      A value 0 indicates that the DOUT_WORDS interface is
+      driven with a fixed value and is not present on the device, a value of 1
+      configures the DOUT_WORDS to be block based, while a value of 2 configures the
+      DOUT_WORDS input to be supplied for each AXI transaction.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - xlnx,sdfec-code
+  - xlnx,sdfec-din-width
+  - xlnx,sdfec-din-words
+  - xlnx,sdfec-dout-width
+  - xlnx,sdfec-dout-words
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    sd-fec@a0040000 {
+        compatible = "xlnx,sd-fec-1.1";
+        reg = <0xa0040000 0x40000>;
+        clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>,
+                 <&misc_clk_1>, <&misc_clk_1>;
+        clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk",
+                      "s_axis_din_aclk", "m_axis_status_aclk",
+                      "m_axis_dout_aclk";
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,sdfec-code = "ldpc";
+        xlnx,sdfec-din-width = <2>;
+        xlnx,sdfec-din-words = <0>;
+        xlnx,sdfec-dout-width = <1>;
+        xlnx,sdfec-dout-words = <0>;
+    };
+
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 82eb7a24c857..82f7ee8702cb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -55,8 +55,9 @@ properties:
           - enum:
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
-              - fsl,imx93-usdhc
               - fsl,imx8ulp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx95-usdhc
           - const: fsl,imx8mm-usdhc
       - items:
           - enum:
@@ -162,6 +163,9 @@ properties:
       - const: ahb
       - const: per
 
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
@@ -173,6 +177,11 @@ properties:
           - const: state_100mhz
           - const: state_200mhz
           - const: sleep
+      - minItems: 2
+        items:
+          - const: default
+          - const: state_100mhz
+          - const: sleep
       - minItems: 1
         items:
           - const: default
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
index 221f5bc047bd..7911316fbd6a 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -24,6 +24,14 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
   interrupts:
     maxItems: 1
 
@@ -34,6 +42,8 @@ properties:
     const: rx-tx
 
 required:
+  - clocks
+  - clock-names
   - compatible
   - reg
   - interrupts
@@ -46,6 +56,8 @@ examples:
         compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
         reg = <0x10014000 0x1000>;
         interrupts = <11>;
+        clocks = <&clks 29>, <&clks 60>;
+        clock-names = "ipg", "per";
         dmas = <&dma 7>;
         dma-names = "rx-tx";
         bus-width = <4>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
deleted file mode 100644
index a0693b7145f2..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-Read synopsys-dw-mshc.txt for more details
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200
-specific extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc".
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-  in clock-names.
-- clock-names: Should contain the following:
-	"ciu" - The ciu clock described in synopsys-dw-mshc.txt.
-	"biu" - The biu clock described in synopsys-dw-mshc.txt.
-	"ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling.
-	"ciu-drive"  - Hi3798CV200 extended phase clock for ciu driving.
-
-Example:
-
-	emmc: mmc@9830000 {
-		compatible = "hisilicon,hi3798cv200-dw-mshc";
-		reg = <0x9830000 0x10000>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&crg HISTB_MMC_CIU_CLK>,
-			 <&crg HISTB_MMC_BIU_CLK>,
-			 <&crg HISTB_MMC_SAMPLE_CLK>,
-			 <&crg HISTB_MMC_DRV_CLK>;
-		clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
-		fifo-depth = <256>;
-		clock-frequency = <200000000>;
-		cap-mmc-highspeed;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		non-removable;
-		bus-width = <8>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml
new file mode 100644
index 000000000000..41c9b22523e7
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/hisilicon,hi3798cv200-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiSTB SoCs specific extensions to the Synopsys DWMMC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hi3798cv200-dw-mshc
+      - hisilicon,hi3798mv200-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bus interface unit clock
+      - description: card interface unit clock
+      - description: card input sample phase clock
+      - description: controller output drive phase clock
+
+  clock-names:
+    items:
+      - const: ciu
+      - const: biu
+      - const: ciu-sample
+      - const: ciu-drive
+
+  hisilicon,sap-dll-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      DWMMC core on Hi3798MV2x SoCs has a delay-locked-loop(DLL) attached to card data input path.
+      It is integrated into CRG core on the SoC and has to be controlled during tuning.
+    items:
+      - description: A phandle pointed to the CRG syscon node
+      - description: Sample DLL register offset in CRG address space
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: hisilicon,hi3798mv200-dw-mshc
+    then:
+      required:
+        - hisilicon,sap-dll-reg
+    else:
+      properties:
+        hisilicon,sap-dll-reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/histb-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@9830000 {
+        compatible = "hisilicon,hi3798cv200-dw-mshc";
+        reg = <0x9830000 0x10000>;
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg HISTB_MMC_CIU_CLK>,
+                 <&crg HISTB_MMC_BIU_CLK>,
+                 <&crg HISTB_MMC_SAMPLE_CLK>,
+                 <&crg HISTB_MMC_DRV_CLK>;
+        clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+        resets = <&crg 0xa0 4>;
+        reset-names = "reset";
+        pinctrl-names = "default";
+        pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+                     &emmc_pins_3 &emmc_pins_4>;
+        fifo-depth = <256>;
+        clock-frequency = <200000000>;
+        cap-mmc-highspeed;
+        mmc-ddr-1_8v;
+        mmc-hs200-1_8v;
+        non-removable;
+        bus-width = <8>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index f7a4c6bc70f6..29f2400247eb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -67,6 +67,7 @@ properties:
               - renesas,sdhi-r8a779a0  # R-Car V3U
               - renesas,sdhi-r8a779f0  # R-Car S4-8
               - renesas,sdhi-r8a779g0  # R-Car V4H
+              - renesas,sdhi-r8a779h0  # R-Car V4M
           - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index 42804d955293..4d3031d9965f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -19,6 +19,8 @@ properties:
       - rockchip,rk3568-dwcmshc
       - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
+      - sophgo,cv1800b-dwcmshc
+      - sophgo,sg2002-dwcmshc
       - thead,th1520-dwcmshc
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/atmel-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 50645828ac20..4598930851d9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -56,6 +56,7 @@ Required properties:
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
 	"microchip,sam9x60-pmecc"
+	"microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
index f57e96374e67..064e840aeaa1 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller
 maintainers:
   - Brian Norris <computersforpeace@gmail.com>
   - Kamal Dasu <kdasu.kdev@gmail.com>
+  - William Zhang <william.zhang@broadcom.com>
 
 description: |
   The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
@@ -18,9 +19,10 @@ description: |
   supports basic PROGRAM and READ functions, among other features.
 
   This controller was originally designed for STB SoCs (BCM7xxx) but is now
-  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
-  iProc/Cygnus. Its history includes several similar (but not fully register
-  compatible) versions.
+  available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based
+  Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus.
+  Its history includes several similar (but not fully register compatible)
+  versions.
 
   -- Additional SoC-specific NAND controller properties --
 
@@ -53,7 +55,7 @@ properties:
               - brcm,brcmnand-v7.2
               - brcm,brcmnand-v7.3
           - const: brcm,brcmnand
-      - description: BCM63138 SoC-specific NAND controller
+      - description: BCMBCA SoC-specific NAND controller
         items:
           - const: brcm,nand-bcm63138
           - enum:
@@ -111,6 +113,13 @@ properties:
       earlier versions of this core that include WP
     type: boolean
 
+  brcm,wp-not-connected:
+    description:
+      Use this property when WP pin is not physically wired to the NAND chip.
+      Write protection feature cannot be used. By default, controller assumes
+      the pin is connected and feature is used.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -137,6 +146,15 @@ patternProperties:
           layout.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      brcm,nand-ecc-use-strap:
+        description:
+          This property requires the host system to get the ECC related
+          settings from the SoC NAND boot strap configuration instead of
+          the generic NAND ECC settings. This is a common hardware design
+          on BCMBCA based boards. This strap ECC option and generic NAND
+          ECC option can not be specified at the same time.
+        $ref: /schemas/types.yaml#/definitions/flag
+
     unevaluatedProperties: false
 
 allOf:
@@ -177,6 +195,8 @@ allOf:
             - const: iproc-idm
             - const: iproc-ext
   - if:
+      required:
+        - interrupts
       properties:
         interrupts:
           minItems: 2
@@ -184,12 +204,26 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          required:
+            - brcm,nand-ecc-use-strap
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength: false
+            nand-ecc-step-size: false
+            nand-ecc-maximize: false
+            nand-ecc-algo: false
+            brcm,nand-oob-sector-size: false
+
 unevaluatedProperties: false
 
 required:
   - reg
   - reg-names
-  - interrupts
 
 examples:
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/davinci-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/davinci-nand.txt
index edebeae1f5b3..eb8e2ff4dbd2 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/davinci-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -68,7 +68,7 @@ Deprecated properties:
 				false.
 
 Nand device bindings may contain additional sub-nodes describing partitions of
-the address space. See partition.txt for more detail. The NAND Flash timing
+the address space. See mtd.yaml for more detail. The NAND Flash timing
 values must be programmed in the chip select’s node of AEMIF
 memory-controller (see Documentation/devicetree/bindings/memory-controllers/
 davinci-aemif.txt).
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/flctl-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/flctl-nand.txt
index 427f46dc60ad..51518399d737 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/flctl-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/flctl-nand.txt
@@ -15,7 +15,7 @@ The DMA fields are not used yet in the driver but are listed here for
 completing the bindings.
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
index 25f07c1f9e44..530c017e014e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
@@ -22,7 +22,7 @@ Deprecated properties:
 	(R/B# pins not connected).
 
 Each flash chip described may optionally contain additional sub-nodes
-describing partitions of the address space. See partition.txt for more
+describing partitions of the address space. See mtd.yaml for more
 detail.
 
 Examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
index 486a17d533d7..0edf55d47ea8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
@@ -26,7 +26,7 @@ Optional properties:
   read to ensure that the GPIO accesses have completed.
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Examples:
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index ba086c34626d..021c0da0b072 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -12,7 +12,7 @@ maintainers:
 description: |
   The GPMI nand controller provides an interface to control the NAND
   flash chips. The device tree may optionally contain sub-nodes
-  describing partitions of the address space. See partition.txt for
+  describing partitions of the address space. See mtd.yaml for
   more detail.
 
 properties:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/hisi504-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
index 8963983ae7cb..362203e7d50e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
@@ -22,7 +22,7 @@ The following ECC strength and step size are currently supported:
  - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
 
 Flash chip may optionally contain additional sub-nodes describing partitions of
-the address space. See partition.txt for more detail.
+the address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 58f0cea160ef..6e3afb42926e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -52,6 +52,9 @@ properties:
     minItems: 1
     maxItems: 2
 
+  interrupts:
+    maxItems: 1
+
   m25p,fast-read:
     type: boolean
     description:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/mtd.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/mtd.yaml
index f322290ee516..ee442ecb11cd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/mtd.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
   - Richard Weinberger <richard@nod.at>
 
+select: false
+
 properties:
   $nodename:
     pattern: "^(flash|.*sram|nand)(@.*)?$"
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
index e737e5beb7bf..4a00ec2b2540 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
@@ -39,7 +39,7 @@ Optional children node properties:
 - wp-gpios: GPIO specifier for the write protect pin.
 
 Optional child node of NAND chip nodes:
-Partitions: see partition.txt
+Partitions: see mtd.yaml
 
   Example:
 	nand-controller@70008000 {
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/orion-nand.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/orion-nand.txt
index 2d6ab660e603..b9997b1f13ac 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/orion-nand.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/orion-nand.txt
@@ -13,7 +13,7 @@ Optional properties:
                registers in usecs
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml
new file mode 100644
index 000000000000..27e1ac1f252e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unsorted Block Images
+
+description: |
+  UBI ("Unsorted Block Images") is a volume management system for raw
+  flash devices which manages multiple logical volumes on a single
+  physical flash device and spreads the I/O load (i.e wear-leveling)
+  across the whole flash chip.
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    const: linux,ubi
+
+  volumes:
+    type: object
+    description: UBI Volumes
+
+    patternProperties:
+      "^ubi-volume-.*$":
+        $ref: /schemas/mtd/partitions/ubi-volume.yaml#
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x100000>;
+            label = "bootloader";
+            read-only;
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "ubi";
+            compatible = "linux,ubi";
+
+            volumes {
+                ubi-volume-caldata {
+                    volid = <2>;
+                    volname = "rf";
+
+                    nvmem-layout {
+                        compatible = "fixed-layout";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+
+                        eeprom@0 {
+                            reg = <0x0 0x1000>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
new file mode 100644
index 000000000000..19736b26056b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UBI volume
+
+description: |
+  This binding describes a single UBI volume. Volumes can be matches either
+  by their ID or their name, or both.
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+properties:
+  volid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Match UBI volume ID
+
+  volname:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Match UBI volume ID
+
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
+    description:
+      This container may reference an NVMEM layout parser.
+
+anyOf:
+  - required:
+      - volid
+
+  - required:
+      - volname
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
index 09815c40fc8a..635455350660 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
@@ -19,7 +19,7 @@ Optional child properties:
 
 Each child device node may optionally contain a 'partitions' sub-node,
 which further contains sub-nodes describing the flash partition mapping.
-See partition.txt for more detail.
+See mtd.yaml for more detail.
 
 Example:
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index e72cb5bacaf0..b8ef9ba88e92 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -14,10 +14,11 @@ properties:
     enum:
       - st,stm32mp15-fmc2
       - st,stm32mp1-fmc2-nfc
+      - st,stm32mp25-fmc2-nfc
 
   reg:
     minItems: 6
-    maxItems: 7
+    maxItems: 12
 
   interrupts:
     maxItems: 1
@@ -92,6 +93,28 @@ allOf:
             - description: Chip select 1 command
             - description: Chip select 1 address space
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp25-fmc2-nfc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+            - description: Chip select 2 data
+            - description: Chip select 2 command
+            - description: Chip select 2 address space
+            - description: Chip select 3 data
+            - description: Chip select 3 command
+            - description: Chip select 3 address space
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/mux/mux-controller.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mux/mux-controller.yaml
index 8b943082a241..571ad9e13ecf 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/mux/mux-controller.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -74,7 +74,7 @@ select:
 
 properties:
   $nodename:
-    pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+    pattern: '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$'
 
   '#mux-control-cells':
     enum: [ 0, 1 ]
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 66b662ae624c..8e6d4703210c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Bluetooth Chips
 
 maintainers:
-  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
-  - Rocky Liao <rjliao@codeaurora.org>
+  - Balakrishna Godavarthi <quic_bgodavar@quicinc.com>
+  - Rocky Liao <quic_rjliao@quicinc.com>
 
 description:
   This binding describes Qualcomm UART-attached bluetooth chips.
@@ -94,6 +94,10 @@ properties:
 
   local-bd-address: true
 
+  qcom,local-bd-address-broken:
+    type: boolean
+    description:
+      boot firmware is incorrectly passing the address in big-endian order
 
 required:
   - compatible
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
index 75d8138298fb..660e2ca42daf 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
@@ -15,6 +15,10 @@ description: Broadcom Ethernet controller first introduced with 72165
 properties:
   compatible:
     oneOf:
+      - items:
+          - enum:
+              - brcm,bcm74165b0-asp
+          - const: brcm,asp-v2.2
       - items:
           - enum:
               - brcm,bcm74165-asp
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
index 6684810fcbf0..23dfe0838dca 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -24,6 +24,7 @@ properties:
       - brcm,genet-mdio-v5
       - brcm,asp-v2.0-mdio
       - brcm,asp-v2.1-mdio
+      - brcm,asp-v2.2-mdio
       - brcm,unimac-mdio
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 4162469c3c08..f197d9b516bb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -38,6 +38,9 @@ properties:
               - fsl,imx6ul-flexcan
               - fsl,imx6sx-flexcan
           - const: fsl,imx6q-flexcan
+      - items:
+          - const: fsl,imx95-flexcan
+          - const: fsl,imx93-flexcan
       - items:
           - enum:
               - fsl,ls1028ar1-flexcan
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
index 45aa3de7cf01..01e4d4a54df6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -24,7 +24,9 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    items:
+      - description: AHB peripheral clock
+      - description: CAN bus clock
 
 required:
   - compatible
@@ -39,7 +41,7 @@ examples:
     can@2010c000 {
         compatible = "microchip,mpfs-can";
         reg = <0x2010c000 0x1000>;
-        clocks = <&clkcfg 17>;
+        clocks = <&clkcfg 17>, <&clkcfg 37>;
         interrupt-parent = <&plic>;
         interrupts = <56>;
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 170e23f0610d..20c0572c9853 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -28,6 +28,8 @@ Optional properties:
 			      available with tcan4552/4553.
 	- device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
 			     available with tcan4552/4553.
+	- wakeup-source: Leave the chip running when suspended, and configure
+			 the RX interrupt to wake up the device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
@@ -42,4 +44,5 @@ tcan4x5x: tcan4x5x@0 {
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/xilinx,can.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
index 64d57c343e6f..8d4e5af6fd6c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -49,6 +49,10 @@ properties:
   resets:
     maxItems: 1
 
+  xlnx,has-ecc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN)
+
 required:
   - compatible
   - reg
@@ -137,6 +141,7 @@ examples:
         interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
         tx-fifo-depth = <0x40>;
         rx-fifo-depth = <0x40>;
+        xlnx,has-ecc;
     };
 
   - |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/cdns,macb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/cdns,macb.yaml
index bf8894a0257e..2c71e2cf3a2f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -59,6 +59,11 @@ properties:
           - cdns,gem                  # Generic
           - cdns,macb                 # Generic
 
+      - items:
+          - enum:
+              - microchip,sam9x7-gem     # Microchip SAM9X7 gigabit ethernet interface
+          - const: microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
+
   reg:
     minItems: 1
     items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/ar9331.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/ar9331.txt
deleted file mode 100644
index f824fdae0da2..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Atheros AR9331 built-in switch
-=============================
-
-It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
-MDIO bus. All PHYs are built-in as well.
-
-Required properties:
-
- - compatible: should be: "qca,ar9331-switch"
- - reg: Address on the MII bus for the switch.
- - resets : Must contain an entry for each entry in reset-names.
- - reset-names : Must include the following entries: "switch"
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the switch
- - interrupt-controller: Indicates the switch is itself an interrupt
-   controller. This is used for the PHY interrupts.
- - #interrupt-cells: must be 1
- - mdio: Container of PHY and devices on the switches MDIO bus.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-Examples:
-
-eth0: ethernet@19000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x19000000 0x200>;
-	interrupts = <4>;
-
-	resets = <&rst 9>, <&rst 22>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "mii";
-	phy-handle = <&phy_port4>;
-};
-
-eth1: ethernet@1a000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x1a000000 0x200>;
-	interrupts = <5>;
-	resets = <&rst 13>, <&rst 23>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "gmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch10: switch@10 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			compatible = "qca,ar9331-switch";
-			reg = <0x10>;
-			resets = <&rst 8>;
-			reset-names = "switch";
-
-			interrupt-parent = <&miscintc>;
-			interrupts = <12>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch_port0: port@0 {
-					reg = <0x0>;
-					ethernet = <&eth1>;
-
-					phy-mode = "gmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				switch_port1: port@1 {
-					reg = <0x1>;
-					phy-handle = <&phy_port0>;
-					phy-mode = "internal";
-				};
-
-				switch_port2: port@2 {
-					reg = <0x2>;
-					phy-handle = <&phy_port1>;
-					phy-mode = "internal";
-				};
-
-				switch_port3: port@3 {
-					reg = <0x3>;
-					phy-handle = <&phy_port2>;
-					phy-mode = "internal";
-				};
-
-				switch_port4: port@4 {
-					reg = <0x4>;
-					phy-handle = <&phy_port3>;
-					phy-mode = "internal";
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				interrupt-parent = <&switch10>;
-
-				phy_port0: phy@0 {
-					reg = <0x0>;
-					interrupts = <0>;
-				};
-
-				phy_port1: phy@1 {
-					reg = <0x1>;
-					interrupts = <0>;
-				};
-
-				phy_port2: phy@2 {
-					reg = <0x2>;
-					interrupts = <0>;
-				};
-
-				phy_port3: phy@3 {
-					reg = <0x3>;
-					interrupts = <0>;
-				};
-
-				phy_port4: phy@4 {
-					reg = <0x4>;
-					interrupts = <0>;
-				};
-			};
-		};
-	};
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index c963dc09e8e1..52acc15ebcbf 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -31,6 +31,7 @@ properties:
       - microchip,ksz9893
       - microchip,ksz9563
       - microchip,ksz8563
+      - microchip,ksz8567
 
   reset-gpios:
     description:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml
new file mode 100644
index 000000000000..fd9ddc59d38c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9331 built-in switch
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+  Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and
+  addressable over internal MDIO bus. All PHYs are built-in as well.
+
+properties:
+  compatible:
+    const: qca,ar9331-switch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    properties:
+      interrupt-parent: true
+
+    patternProperties:
+      '(ethernet-)?phy@[0-4]+$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          reg: true
+          interrupts:
+            maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: switch
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - mdio
+  - ports
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch10: switch@10 {
+            compatible = "qca,ar9331-switch";
+            reg = <0x10>;
+
+            interrupt-parent = <&miscintc>;
+            interrupts = <12>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            resets = <&rst 8>;
+            reset-names = "switch";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0x0>;
+                    ethernet = <&eth1>;
+
+                    phy-mode = "gmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <0x1>;
+                    phy-handle = <&phy_port0>;
+                    phy-mode = "internal";
+                };
+
+                port@2 {
+                    reg = <0x2>;
+                    phy-handle = <&phy_port1>;
+                    phy-mode = "internal";
+                };
+
+                port@3 {
+                    reg = <0x3>;
+                    phy-handle = <&phy_port2>;
+                    phy-mode = "internal";
+                };
+
+                port@4 {
+                    reg = <0x4>;
+                    phy-handle = <&phy_port3>;
+                    phy-mode = "internal";
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                interrupt-parent = <&switch10>;
+
+                phy_port0: ethernet-phy@0 {
+                    reg = <0x0>;
+                    interrupts = <0>;
+                };
+
+                phy_port1: ethernet-phy@1 {
+                    reg = <0x1>;
+                    interrupts = <0>;
+                };
+
+                phy_port2: ethernet-phy@2 {
+                    reg = <0x2>;
+                    interrupts = <0>;
+                };
+
+                phy_port3: ethernet-phy@3 {
+                    reg = <0x3>;
+                    interrupts = <0>;
+                };
+
+                phy_port4: ethernet-phy@4 {
+                    reg = <0x4>;
+                    interrupts = <0>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/realtek.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index cce692f57b08..70b6bda3cf98 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -59,6 +59,9 @@ properties:
     description: GPIO to be used to reset the whole device
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   realtek,disable-leds:
     type: boolean
     description: |
@@ -127,7 +130,6 @@ else:
     - mdc-gpios
     - mdio-gpios
     - mdio
-    - reset-gpios
 
 required:
   - compatible
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index d14d123ad7a0..b2785b03139f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -14,7 +14,6 @@ properties:
     pattern: "^ethernet(@.*)?$"
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Human readable label on a port of a box.
 
   local-mac-address:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
new file mode 100644
index 000000000000..e567101e6f38
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Package Common Properties
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  PHY packages are multi-port Ethernet PHY of the same family
+  and each Ethernet PHY is affected by the global configuration
+  of the PHY package.
+
+  Each reg of the PHYs defined in the PHY package node is
+  absolute and describe the real address of the Ethernet PHY on
+  the MDIO bus.
+
+properties:
+  $nodename:
+    pattern: "^ethernet-phy-package@[a-f0-9]+$"
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description:
+      The base ID number for the PHY package.
+      Commonly the ID of the first PHY in the PHY package.
+
+      Some PHY in the PHY package might be not defined but
+      still occupy ID on the device (just not attached to
+      anything) hence the PHY package reg might correspond
+      to a not attached PHY (offset 0).
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
index 8948a11c994e..5536c06139ca 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -224,6 +224,9 @@ properties:
       Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
       Other delays are invalid.
 
+  iommus:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
index 9cc236ec42f2..d0332eb76ad2 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
@@ -73,7 +73,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qca,qca808x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qca,qca808x.yaml
new file mode 100644
index 000000000000..e2552655902a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qca,qca808x.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,qca808x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA808X PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  QCA808X PHYs can have up to 3 LEDs attached.
+  All 3 LEDs are disabled by default.
+  2 LEDs have dedicated pins with the 3rd LED having the
+  double function of Interrupt LEDs/GPIO or additional LED.
+
+  By default this special PIN is set to LED function.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id004d.d101
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id004d.d101";
+            reg = <0>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_WAN;
+                    default-state = "keep";
+                };
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ethqos.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 7bdb412a0185..69a337c7e345 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@ properties:
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - const: eth_lpi
+      - enum: [eth_lpi, sfty]
+      - const: sfty
 
   clocks:
     maxItems: 4
@@ -89,8 +91,9 @@ examples:
                <&gcc GCC_ETH_PTP_CLK>,
                <&gcc GCC_ETH_RGMII_CLK>;
       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-names = "macirq", "eth_lpi";
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi", "sfty";
 
       rx-fifo-depth = <4096>;
       tx-fifo-depth = <4096>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 518176bb9d48..e66fc0720dee 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -159,7 +159,7 @@ properties:
       when the AP (not the modem) performs early initialization.
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       If present, name (or relative path) of the file within the
       firmware search path containing the firmware image used when
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 3407e909e8a7..0029e197a825 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -44,6 +44,21 @@ properties:
     items:
       - const: gcc_mdio_ahb_clk
 
+  clock-frequency:
+    description:
+      The MDIO bus clock that must be output by the MDIO bus hardware, if
+      absent, the default hardware values are used.
+
+      MDC rate is feed by an external clock (fixed 100MHz) and is divider
+      internally. The default divider is /256 resulting in the default rate
+      applied of 390KHz.
+
+      To follow 802.3 standard that instruct up to 2.5MHz by default, if
+      this property is not declared and the divider is set to /256, by
+      default 1.5625Mhz is select.
+    enum: [ 390625, 781250, 1562500, 3125000, 6250000, 12500000 ]
+    default: 1562500
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/qcom,qca807x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
new file mode 100644
index 000000000000..7290024024f5
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA807x Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm QCA8072/5 Ethernet PHY is PHY package of 2 or 5
+  IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
+  1000BASE-T PHY-s.
+
+  They feature 2 SerDes, one for PSGMII or QSGMII connection with
+  MAC, while second one is SGMII for connection to MAC or fiber.
+
+  Both models have a combo port that supports 1000BASE-X and
+  100BASE-FX fiber.
+
+  Each PHY inside of QCA807x series has 4 digitally controlled
+  output only pins that natively drive LED-s for up to 2 attached
+  LEDs. Some vendor also use these 4 output for GPIO usage without
+  attaching LEDs.
+
+  Note that output pins can be set to drive LEDs OR GPIO, mixed
+  definition are not accepted.
+
+$ref: ethernet-phy-package.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca8072-package
+      - qcom,qca8075-package
+
+  qcom,package-mode:
+    description: |
+      PHY package can be configured in 3 mode following this table:
+
+                    First Serdes mode       Second Serdes mode
+      Option 1      PSGMII for copper       Disabled
+                    ports 0-4
+      Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
+                    ports 0-4
+      Option 3      QSGMII for copper       SGMII for
+                    ports 0-3               copper port 4
+
+      PSGMII mode (option 1 or 2) is configured dynamically based on
+      the presence of a connected SFP device.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - qsgmii
+      - psgmii
+    default: psgmii
+
+  qcom,tx-drive-strength-milliwatt:
+    description: set the TX Amplifier value in mv.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [140, 160, 180, 200, 220,
+           240, 260, 280, 300, 320,
+           400, 500, 600]
+    default: 600
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      qcom,dac-full-amplitude:
+        description:
+          Set Analog MDI driver amplitude to FULL.
+
+          With this not defined, amplitude is set to DSP.
+          (amplitude is adjusted based on cable length)
+
+          With this enabled and qcom,dac-full-bias-current
+          and qcom,dac-disable-bias-current-tweak disabled,
+          bias current is half.
+        type: boolean
+
+      qcom,dac-full-bias-current:
+        description:
+          Set Analog MDI driver bias current to FULL.
+
+          With this not defined, bias current is set to DSP.
+          (bias current is adjusted based on cable length)
+
+          Actual bias current might be different with
+          qcom,dac-disable-bias-current-tweak disabled.
+        type: boolean
+
+      qcom,dac-disable-bias-current-tweak:
+        description: |
+          Set Analog MDI driver bias current to disable tweak
+          to bias current.
+
+          With this not defined, bias current tweak are enabled
+          by default.
+
+          With this enabled the following tweak are NOT applied:
+          - With both FULL amplitude and FULL bias current: bias current
+            is set to half.
+          - With only DSP amplitude: bias current is set to half and
+            is set to 1/4 with cable < 10m.
+          - With DSP bias current (included both DSP amplitude and
+            DSP bias current): bias current is half the detected current
+            with cable < 10m.
+        type: boolean
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+    if:
+      required:
+        - gpio-controller
+    then:
+      properties:
+        leds: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy-package@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "qcom,qca8075-package";
+            reg = <0>;
+
+            qcom,package-mode = "qsgmii";
+
+            ethernet-phy@0 {
+                reg = <0>;
+
+                leds {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_GREEN>;
+                        function = LED_FUNCTION_LAN;
+                        default-state = "keep";
+                    };
+                };
+            };
+
+            ethernet-phy@1 {
+                reg = <1>;
+            };
+
+            ethernet-phy@2 {
+                reg = <2>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            ethernet-phy@3 {
+                reg = <3>;
+            };
+
+            ethernet-phy@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 890f7858d0dc..de7ba7f345a9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -46,6 +46,7 @@ properties:
           - enum:
               - renesas,etheravb-r8a779a0     # R-Car V3U
               - renesas,etheravb-r8a779g0     # R-Car V4H
+              - renesas,etheravb-r8a779h0     # R-Car V4M
           - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
 
       - items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 5c2769dc689a..6b0341a8e0ea 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -95,6 +95,7 @@ properties:
         - snps,dwmac-5.20
         - snps,dwxgmac
         - snps,dwxgmac-2.10
+        - starfive,jh7100-dwmac
         - starfive,jh7110-dwmac
 
   reg:
@@ -107,13 +108,15 @@ properties:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - enum: [eth_wake_irq, eth_lpi]
-      - const: eth_lpi
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
 
   clocks:
     minItems: 1
@@ -144,10 +147,12 @@ properties:
       - description: AHB reset
 
   reset-names:
-    minItems: 1
-    items:
-      - const: stmmaceth
-      - const: ahb
+    oneOf:
+      - items:
+          - enum: [stmmaceth, ahb]
+      - items:
+          - const: stmmaceth
+          - const: ahb
 
   power-domains:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
index 5e7cfbbebce6..0d1962980f57 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
@@ -16,16 +16,20 @@ select:
     compatible:
       contains:
         enum:
+          - starfive,jh7100-dwmac
           - starfive,jh7110-dwmac
   required:
     - compatible
 
 properties:
   compatible:
-    items:
-      - enum:
-          - starfive,jh7110-dwmac
-      - const: snps,dwmac-5.20
+    oneOf:
+      - items:
+          - const: starfive,jh7100-dwmac
+          - const: snps,dwmac
+      - items:
+          - const: starfive,jh7110-dwmac
+          - const: snps,dwmac-5.20
 
   reg:
     maxItems: 1
@@ -46,24 +50,6 @@ properties:
       - const: tx
       - const: gtx
 
-  interrupts:
-    minItems: 3
-    maxItems: 3
-
-  interrupt-names:
-    minItems: 3
-    maxItems: 3
-
-  resets:
-    items:
-      - description: MAC Reset signal.
-      - description: AHB Reset signal.
-
-  reset-names:
-    items:
-      - const: stmmaceth
-      - const: ahb
-
   starfive,tx-use-rgmii-clk:
     description:
       Tx clock is provided by external rgmii clock.
@@ -94,6 +80,48 @@ required:
 allOf:
   - $ref: snps,dwmac.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7100-dwmac
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          const: ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-dwmac
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
+        resets:
+          minItems: 2
+
+        reset-names:
+          minItems: 2
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index f07ae3173b03..d5bd93ee4dbb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI SoC Ethernet Switch Controller (CPSW)
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description:
   The 3-port switch gigabit ethernet subsystem provides ethernet packet
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index db74474207ed..784866ea392b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -62,6 +62,40 @@ properties:
        for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
        to transmit data.
 
+  ti,cfg-dac-minus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level -1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,cfg-dac-plus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level +1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,rmii-mode:
+    description: |
+       If present, select the RMII operation mode. Two modes are
+       available:
+         - RMII master, where the PHY outputs a 50MHz reference clock which can
+         be connected to the MAC.
+         - RMII slave, where the PHY expects a 50MHz reference clock input
+         shared with the MAC.
+       The RMII operation mode can also be configured by its straps.
+       If the strap pin is not set correctly or not set at all, then this can be
+       used to configure it.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - master
+      - slave
+
 required:
   - reg
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index c9c25132d154..73ed5951d296 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description:
   The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 3e910d3b24a0..b1c875325776 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description: |+
   The TI AM654x/J721E CPTS module is used to facilitate host control of time
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index 252207adbc54..eabceb849537 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -19,9 +19,6 @@ description: |
   Alternatively, it can specify the wireless part of the MT7628/MT7688
   or MT7622/MT7986 SoC.
 
-allOf:
-  - $ref: ieee80211.yaml#
-
 properties:
   compatible:
     enum:
@@ -38,7 +35,12 @@ properties:
       MT7986 should contain 3 regions consys, dcm, and sku, in this order.
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: major interrupt for rings
+      - description: additional interrupt for ring 19
+      - description: additional interrupt for ring 4
+      - description: additional interrupt for ring 5
 
   power-domains:
     maxItems: 1
@@ -217,6 +219,24 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: ieee80211.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7981-wmac
+              - mediatek,mt7986-wmac
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
@@ -293,7 +313,10 @@ examples:
         reg = <0x18000000 0x1000000>,
               <0x10003000 0x1000>,
               <0x11d10000 0x1000>;
-        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&topckgen 50>,
                  <&topckgen 62>;
         clock-names = "mcu", "ap2conn";
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index f458a101756d..565f84c264be 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -8,6 +8,7 @@ title: Qualcomm Technologies ath10k wireless devices
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description:
   Qualcomm Technologies, Inc. IEEE 802.11ac devices.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
index 817f02a8b481..41d023797d7d 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -9,6 +9,7 @@ title: Qualcomm Technologies ath11k wireless devices (PCIe)
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description: |
   Qualcomm Technologies IEEE 802.11ax PCIe devices
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index fec2d2e40d7a..12fd5ea2ca6e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -9,6 +9,7 @@ title: Qualcomm Technologies ath11k wireless devices
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
index ac2381e66027..8b3826243ddd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
@@ -36,20 +36,18 @@ properties:
 
 allOf:
   - if:
+      properties:
+        compatible:
+          contains:
+            const: mac-base
       required: [ compatible ]
     then:
-      if:
-        properties:
-          compatible:
-            contains:
-              const: mac-base
-      then:
-        properties:
-          "#nvmem-cell-cells":
-            description: The first argument is a MAC address offset.
-            const: 1
-        required:
-          - "#nvmem-cell-cells"
+      properties:
+        "#nvmem-cell-cells":
+          description: The first argument is a MAC address offset.
+          const: 1
+      required:
+        - "#nvmem-cell-cells"
 
 required:
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml
new file mode 100644
index 000000000000..4009a9a03841
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
+
+title: NVMEM (Non Volatile Memory) Provider
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+select: true
+
+properties:
+  '#nvmem-cell-cells':
+    enum: [0, 1]
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
deleted file mode 100644
index 4881561b3a02..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
+++ /dev/null
@@ -1,46 +0,0 @@
---------------------------------------------------------------------------
-=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
---------------------------------------------------------------------------
-The nvmem_firmware node provides access to the hardware related data
-like soc revision, IDCODE... etc, By using the firmware interface.
-
-Required properties:
-- compatible: should be "xlnx,zynqmp-nvmem-fw"
-
-= Data cells =
-Are child nodes of silicon id, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
--------
- Example
--------
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		nvmem_firmware {
-			compatible = "xlnx,zynqmp-nvmem-fw";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* Data cells */
-			soc_revision: soc_revision {
-				reg = <0x0 0x4>;
-			};
-		};
-	};
-};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-	pcap {
-		...
-
-		nvmem-cells = <&soc_revision>;
-		nvmem-cell-names = "soc_revision";
-
-		...
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
new file mode 100644
index 000000000000..917c40d5c382
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC Non Volatile Memory interface
+
+description: |
+    The ZynqMP MPSoC provides access to the hardware related data
+    like SOC revision, IDCODE and specific purpose efuses.
+
+maintainers:
+  - Kalyani Akula <kalyani.akula@amd.com>
+  - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-nvmem-fw
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nvmem {
+        compatible = "xlnx,zynqmp-nvmem-fw";
+        nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/opp/opp-v2-base.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
index e2f8f7af3cf4..b1bb87c865ed 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -57,8 +57,6 @@ patternProperties:
           specific binding.
         minItems: 1
         maxItems: 32
-        items:
-          maxItems: 1
 
       opp-microvolt:
         description: |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index d91b639ae7ae..a8b34f58f8f4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -150,22 +150,6 @@ allOf:
             - {}
             - const: pcie_phy
             - const: pcie_aux
-  - if:
-      properties:
-        compatible:
-          not:
-            contains:
-              enum:
-                - fsl,imx6sx-pcie
-                - fsl,imx8mq-pcie
-                - fsl,imx6sx-pcie-ep
-                - fsl,imx8mq-pcie-ep
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          maxItems: 3
 
   - if:
       properties:
@@ -223,6 +207,7 @@ allOf:
                 - fsl,imx6sx-pcie
                 - fsl,imx6q-pcie
                 - fsl,imx6qp-pcie
+                - fsl,imx95-pcie
                 - fsl,imx6sx-pcie-ep
                 - fsl,imx6q-pcie-ep
                 - fsl,imx6qp-pcie-ep
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
index ee155ed5f181..a06f75df8458 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -22,14 +22,7 @@ properties:
       - fsl,imx8mm-pcie-ep
       - fsl,imx8mq-pcie-ep
       - fsl,imx8mp-pcie-ep
-
-  reg:
-    minItems: 2
-
-  reg-names:
-    items:
-      - const: dbi
-      - const: addr_space
+      - fsl,imx95-pcie-ep
 
   clocks:
     minItems: 3
@@ -62,11 +55,48 @@ required:
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
   - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie-ep
+            - fsl,imx8mq-pcie-ep
+            - fsl,imx8mp-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: addr_space
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 6
+        reg-names:
+          items:
+            - const: dbi
+            - const: atu
+            - const: dbi2
+            - const: app
+            - const: dma
+            - const: addr_space
+
   - if:
       properties:
         compatible:
           enum:
             - fsl,imx8mq-pcie-ep
+            - fsl,imx95-pcie-ep
     then:
       properties:
         clocks:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 81bbb8728f0f..8b8d77b1154b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -29,16 +29,7 @@ properties:
       - fsl,imx8mq-pcie
       - fsl,imx8mm-pcie
       - fsl,imx8mp-pcie
-
-  reg:
-    items:
-      - description: Data Bus Interface (DBI) registers.
-      - description: PCIe configuration space region.
-
-  reg-names:
-    items:
-      - const: dbi
-      - const: config
+      - fsl,imx95-pcie
 
   clocks:
     minItems: 3
@@ -90,6 +81,43 @@ required:
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie.yaml#
   - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6q-pcie
+            - fsl,imx6sx-pcie
+            - fsl,imx6qp-pcie
+            - fsl,imx7d-pcie
+            - fsl,imx8mq-pcie
+            - fsl,imx8mm-pcie
+            - fsl,imx8mp-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: config
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi
+            - const: config
+            - const: atu
+            - const: app
+
   - if:
       properties:
         compatible:
@@ -111,6 +139,7 @@ allOf:
         compatible:
           enum:
             - fsl,imx8mq-pcie
+            - fsl,imx95-pcie
     then:
       properties:
         clocks:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
new file mode 100644
index 000000000000..0d1b23523f62
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI Express Root Complex Common Properties
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  reg:
+    minItems: 4
+    maxItems: 6
+
+  reg-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  reset-names:
+    minItems: 1
+    maxItems: 12
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - reg
+  - reg-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
new file mode 100644
index 000000000000..efde49d1bef8
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775p PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sa8775p
+
+  reg:
+    minItems: 6
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 5
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+required:
+  - interconnects
+  - interconnect-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sa8775p";
+            reg = <0x0 0x01c00000 0x0 0x3000>,
+                  <0x0 0x40000000 0x0 0xf20>,
+                  <0x0 0x40000f20 0x0 0xa8>,
+                  <0x0 0x40001000 0x0 0x4000>,
+                  <0x0 0x40100000 0x0 0x100000>,
+                  <0x0 0x01c03000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                              "msi1",
+                              "msi2",
+                              "msi3",
+                              "msi4",
+                              "msi5",
+                              "msi6",
+                              "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+            interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+                        <0x100 &pcie_smmu 0x0001 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
new file mode 100644
index 000000000000..634da24ec3ed
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sc7280
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 13
+    maxItems: 13
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+  vddpe-3v3-supply:
+    description: PCIe endpoint power supply
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-sc7280";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x40000000 0 0xf1d>,
+                  <0 0x40000f20 0 0xa8>,
+                  <0 0x40001000 0 0x1000>,
+                  <0 0x40100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <1>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+                     <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+                     <&pcie1_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_1_AUX_CLK>,
+                     <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+                        <0x100 &apps_smmu 0x1c81 0x1>;
+
+            phys = <&pcie1_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie1_clkreq_n>;
+
+            power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+            resets = <&gcc GCC_PCIE_1_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            vddpe-3v3-supply = <&pp3300_ssd>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
new file mode 100644
index 000000000000..baf1813ec0ac
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180x PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sc8180x
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ref # REFERENCE clock
+      - const: tbu # PCIe TBU clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sc8180x";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf",
+                        "dbi",
+                        "elbi",
+                        "atu",
+                        "config";
+            ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_CLKREF_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ref",
+                          "tbu";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                          "msi1",
+                          "msi2",
+                          "msi3",
+                          "msi4",
+                          "msi5",
+                          "msi6",
+                          "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
+                            <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+                        <0x100 &apps_smmu 0x1d81 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
new file mode 100644
index 000000000000..25c9f13ae977
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sa8540p
+      - qcom,pcie-sc8280xp
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: noc_aggr_4 # NoC aggregate 4 clock
+      - const: noc_aggr_south_sf # NoC aggregate South SF clock
+      - const: cnoc_qx # Configuration NoC QX clock
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+required:
+  - interconnects
+  - interconnect-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c20000 {
+            compatible = "qcom,pcie-sc8280xp";
+            reg = <0x0 0x01c20000 0x0 0x3000>,
+                  <0x0 0x3c000000 0x0 0xf1d>,
+                  <0x0 0x3c000f20 0x0 0xa8>,
+                  <0x0 0x3c001000 0x0 0x1000>,
+                  <0x0 0x3c100000 0x0 0x100000>,
+                  <0x0 0x01c23000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            num-lanes = <4>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+            clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+                     <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "noc_aggr_4",
+                          "noc_aggr_south_sf";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+            interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            phys = <&pcie2a_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie2a_default>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_2A_GDSC>;
+
+            resets = <&gcc GCC_PCIE_2A_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+            vddpe-3v3-supply = <&vreg_nvme>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
new file mode 100644
index 000000000000..9d569644fda9
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8150
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ref # REFERENCE clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8150";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ref";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+                        <0x100 &apps_smmu 0x1d81 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
new file mode 100644
index 000000000000..4d060bce6f9d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8250
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    # Unfortunately the "optional" ref clock is used in the middle of the list
+    oneOf:
+      - items:
+          - const: pipe # PIPE clock
+          - const: aux # Auxiliary clock
+          - const: cfg # Configuration clock
+          - const: bus_master # Master AXI clock
+          - const: bus_slave # Slave AXI clock
+          - const: slave_q2a # Slave Q2A clock
+          - const: ref # REFERENCE clock
+          - const: tbu # PCIe TBU clock
+          - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - items:
+          - const: pipe # PIPE clock
+          - const: aux # Auxiliary clock
+          - const: cfg # Configuration clock
+          - const: bus_master # Master AXI clock
+          - const: bus_slave # Slave AXI clock
+          - const: slave_q2a # Slave Q2A clock
+          - const: tbu # PCIe TBU clock
+          - const: ddrss_sf_tbu # PCIe SF TBU clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8250";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>,
+                  <0 0x01c03000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
new file mode 100644
index 000000000000..9eb6e457b07f
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8350
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+      - const: aggre0 # Aggre NoC PCIe0 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+oneOf:
+  - properties:
+      interrupts:
+        maxItems: 1
+      interrupt-names:
+        items:
+          - const: msi
+
+  - properties:
+      interrupts:
+        minItems: 8
+      interrupt-names:
+        items:
+          - const: msi0
+          - const: msi1
+          - const: msi2
+          - const: msi3
+          - const: msi4
+          - const: msi5
+          - const: msi6
+          - const: msi7
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8350";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu",
+                          "aggre1",
+                          "aggre0";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
new file mode 100644
index 000000000000..1496d6993ab4
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 11
+    maxItems: 12
+
+  clock-names:
+    minItems: 11
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8450-pcie0";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            max-link-speed = <2>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+                     <&pcie0_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+            msi-map = <0x0 &gic_its 0x5981 0x1>,
+                      <0x100 &gic_its 0x5980 0x1>;
+            msi-map-mask = <0xff00>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
new file mode 100644
index 000000000000..24cb38673581
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,pcie-sm8550
+      - items:
+          - enum:
+              - qcom,pcie-sm8650
+          - const: qcom,pcie-sm8550
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8550";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "noc_aggr";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
new file mode 100644
index 000000000000..1074310a8e7a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-x1e80100
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-x1e80100";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x7c000000 0 0xf1d>,
+                  <0 0x7c000f40 0 0xa8>,
+                  <0 0x7c001000 0 0x1000>,
+                  <0 0x7c100000 0 0x100000>,
+                  <0 0x01c0b000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "noc_aggr",
+                          "cnoc_sf_axi";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie4_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+            resets = <&gcc GCC_PCIE_4_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index a93ab3b54066..cf9a6910b542 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -28,23 +28,8 @@ properties:
           - qcom,pcie-ipq8074-gen3
           - qcom,pcie-msm8996
           - qcom,pcie-qcs404
-          - qcom,pcie-sa8540p
-          - qcom,pcie-sa8775p
-          - qcom,pcie-sc7280
-          - qcom,pcie-sc8180x
-          - qcom,pcie-sc8280xp
           - qcom,pcie-sdm845
           - qcom,pcie-sdx55
-          - qcom,pcie-sm8150
-          - qcom,pcie-sm8250
-          - qcom,pcie-sm8350
-          - qcom,pcie-sm8450-pcie0
-          - qcom,pcie-sm8450-pcie1
-          - qcom,pcie-sm8550
-      - items:
-          - enum:
-              - qcom,pcie-sm8650
-          - const: qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -106,9 +91,6 @@ properties:
   vdda_refclk-supply:
     description: A phandle to the core analog power supply for IC which generates reference clock
 
-  vddpe-3v3-supply:
-    description: A phandle to the PCIe endpoint power supply
-
   phys:
     maxItems: 1
 
@@ -123,6 +105,9 @@ properties:
     description: GPIO controlled connection to PERST# signal
     maxItems: 1
 
+  required-opps:
+    maxItems: 1
+
   wake-gpios:
     description: GPIO controlled connection to WAKE# signal
     maxItems: 1
@@ -143,7 +128,6 @@ anyOf:
       - "#interrupt-cells"
   - required:
       - msi-map
-      - msi-map-mask
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
@@ -217,16 +201,7 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc7280
-              - qcom,pcie-sc8180x
-              - qcom,pcie-sc8280xp
               - qcom,pcie-sdx55
-              - qcom,pcie-sm8250
-              - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
-              - qcom,pcie-sm8550
     then:
       properties:
         reg:
@@ -451,65 +426,6 @@ allOf:
             - const: pwr # PWR reset
             - const: ahb # AHB reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc7280
-    then:
-      properties:
-        clocks:
-          minItems: 13
-          maxItems: 13
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc8180x
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 8
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ref # REFERENCE clock
-            - const: tbu # PCIe TBU clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       properties:
         compatible:
@@ -553,229 +469,6 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8150
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 8
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ref # REFERENCE clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8250
-    then:
-      oneOf:
-          # Unfortunately the "optional" ref clock is used in the middle of the list
-        - properties:
-            clocks:
-              minItems: 9
-              maxItems: 9
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: ref # REFERENCE clock
-                - const: tbu # PCIe TBU clock
-                - const: ddrss_sf_tbu # PCIe SF TBU clock
-        - properties:
-            clocks:
-              minItems: 8
-              maxItems: 8
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: tbu # PCIe TBU clock
-                - const: ddrss_sf_tbu # PCIe SF TBU clock
-      properties:
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8350
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 9
-        clock-names:
-          minItems: 8
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie0
-    then:
-      properties:
-        clocks:
-          minItems: 12
-          maxItems: 12
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie1
-    then:
-      properties:
-        clocks:
-          minItems: 11
-          maxItems: 11
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8550
-    then:
-      properties:
-        clocks:
-          minItems: 7
-          maxItems: 8
-        clock-names:
-          minItems: 7
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: noc_aggr # Aggre NoC PCIe AXI clock
-            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
-        resets:
-          minItems: 1
-          maxItems: 2
-        reset-names:
-          minItems: 1
-          items:
-            - const: pci # PCIe core reset
-            - const: link_down # PCIe link down reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8540p
-              - qcom,pcie-sc8280xp
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 9
-        clock-names:
-          minItems: 8
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: noc_aggr_4 # NoC aggregate 4 clock
-            - const: noc_aggr_south_sf # NoC aggregate South SF clock
-            - const: cnoc_qx # Configuration NoC QX clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       properties:
         compatible:
@@ -802,43 +495,6 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8775p
-    then:
-      properties:
-        clocks:
-          minItems: 5
-          maxItems: 5
-        clock-names:
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8540p
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc8280xp
-    then:
-      required:
-        - interconnects
-        - interconnect-names
-
   - if:
       not:
         properties:
@@ -874,16 +530,7 @@ allOf:
           contains:
             enum:
               - qcom,pcie-msm8996
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc7280
-              - qcom,pcie-sc8180x
               - qcom,pcie-sdm845
-              - qcom,pcie-sm8150
-              - qcom,pcie-sm8250
-              - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
-              - qcom,pcie-sm8550
     then:
       oneOf:
         - properties:
@@ -906,24 +553,6 @@ allOf:
                 - const: msi6
                 - const: msi7
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc8280xp
-    then:
-      properties:
-        interrupts:
-          minItems: 4
-          maxItems: 4
-        interrupt-names:
-          items:
-            - const: msi0
-            - const: msi1
-            - const: msi2
-            - const: msi3
-
   - if:
       properties:
         compatible:
@@ -938,7 +567,6 @@ allOf:
               - qcom,pcie-ipq8074
               - qcom,pcie-ipq8074-gen3
               - qcom,pcie-qcs404
-              - qcom,pcie-sa8540p
     then:
       properties:
         interrupts:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml
new file mode 100644
index 000000000000..985b62990f80
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/perf/arm,coresight-pmu.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,coresight-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Performance Monitoring Unit Architecture
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    const: arm,coresight-pmu
+
+  reg:
+    items:
+      - description: Register page 0
+      - description: Register page 1, if the PMU implements the dual-page extension
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: Overflow interrupt
+
+  cpus:
+    description: If the PMU is associated with a particular CPU or subset of CPUs,
+      array of phandles to the appropriate CPU node(s)
+
+  reg-io-width:
+    description: Granularity at which PMU register accesses are single-copy atomic
+    default: 4
+    enum: [4, 8]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml
new file mode 100644
index 000000000000..915c6b814026
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/perf/starfive,jh8100-starlink-pmu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH8100 StarLink PMU
+
+maintainers:
+  - Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
+
+description:
+  StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a
+  shared L3 memory system. The PMU support overflow interrupt, up to
+  16 programmable 64bit event counters, and an independent 64bit cycle
+  counter. StarFive's JH8100 StarLink PMU is accessed via MMIO.
+
+properties:
+  compatible:
+    const: starfive,jh8100-starlink-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@12900000 {
+            compatible = "starfive,jh8100-starlink-pmu";
+            reg = <0x0 0x12900000 0x0 0x10000>;
+            interrupts = <34>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
new file mode 100644
index 000000000000..2127a5732f73
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Sensor Interface MIPI CSI CD-PHY
+
+maintainers:
+  - Julien Stephan <jstephan@baylibre.com>
+  - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+  The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
+  receivers. The number of PHYs depends on the SoC model.
+  Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
+  capable.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8365-csi-rx
+
+  reg:
+    maxItems: 1
+
+  num-lanes:
+    enum: [2, 3, 4]
+
+  '#phy-cells':
+    enum: [0, 1]
+    description: |
+      If the PHY doesn't support mode selection then #phy-cells must be 0 and
+      PHY mode is described using phy-type property.
+      If the PHY supports mode selection, then #phy-cells must be 1 and mode
+      is set in the PHY cells. Supported modes are:
+        - PHY_TYPE_DPHY
+        - PHY_TYPE_CPHY
+      See include/dt-bindings/phy/phy.h for constants.
+
+  phy-type:
+    description:
+      If the PHY doesn't support mode selection then this set the operating mode.
+      See include/dt-bindings/phy/phy.h for constants.
+    const: 10
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - num-lanes
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      csi0_rx: phy@11c10000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c10000 0 0x2000>;
+        num-lanes = <2>;
+        #phy-cells = <1>;
+      };
+
+      csi1_rx: phy@11c12000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c12000 0 0x2000>;
+        phy-type = <PHY_TYPE_DPHY>;
+        num-lanes = <2>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index dfb31314face..15dc8efe6ffe 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - cdns,torrent-phy
+      - ti,j7200-serdes-10g
       - ti,j721e-serdes-10g
 
   '#address-cells':
@@ -35,14 +36,18 @@ properties:
     minItems: 1
     maxItems: 2
     description:
-      PHY reference clock for 1 item. Must contain an entry in clock-names.
-      Optional Parent to enable output reference clock.
+      PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1).
+      pll1_refclk is optional and used for multi-protocol configurations requiring
+      separate reference clock for each protocol.
+      Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used.
+      Optional parent clock (phy_en_refclk) to enable a reference clock output feature
+      on some platforms to output either derived or received reference clock.
 
   clock-names:
     minItems: 1
     items:
       - const: refclk
-      - const: phy_en_refclk
+      - enum: [ pll1_refclk, phy_en_refclk ]
 
   reg:
     minItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
new file mode 100644
index 000000000000..f1f4e4f83352
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, MSM8998)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for USB-C on
+  several Qualcomm chipsets.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sdm660-qmp-usb3-phy
+      - qcom,sm6115-qmp-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  qcom,tcsr-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the VLS CLAMP register
+    description: Clamp register present in the TCSR
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+  - qcom,tcsr-reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdm660-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@c010000 {
+      compatible = "qcom,msm8998-qmp-usb3-phy";
+      reg = <0x0c010000 0x1000>;
+
+      clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_CLKREF_CLK>,
+               <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+               <&gcc GCC_USB3_PHY_PIPE_CLK>;
+      clock-names = "aux",
+                    "ref",
+                    "cfg_ahb",
+                    "pipe";
+      clock-output-names = "usb3_phy_pipe_clk_src";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      resets = <&gcc GCC_USB3_PHY_BCR>,
+               <&gcc GCC_USB3PHY_PHY_BCR>;
+      reset-names = "phy",
+                    "phy_phy";
+
+      vdda-phy-supply = <&vreg_l1a_0p875>;
+      vdda-pll-supply = <&vreg_l2a_1p2>;
+
+      orientation-switch;
+
+      qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          endpoint {
+            remote-endpoint = <&pmic_typec_mux_in>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          endpoint {
+            remote-endpoint = <&usb_dwc3_ss>;
+          };
+        };
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 6c03f2d5fca3..ba966a78a128 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -38,6 +38,8 @@ properties:
       - qcom,sm8550-qmp-gen4x2-pcie-phy
       - qcom,sm8650-qmp-gen3x2-pcie-phy
       - qcom,sm8650-qmp-gen4x2-pcie-phy
+      - qcom,x1e80100-qmp-gen3x2-pcie-phy
+      - qcom,x1e80100-qmp-gen4x2-pcie-phy
 
   reg:
     minItems: 1
@@ -151,6 +153,8 @@ allOf:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen3x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -194,6 +198,8 @@ allOf:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         resets:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 8474eef8d0ff..91a6cc38ff7f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -19,6 +19,7 @@ properties:
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,sa8775p-qmp-ufs-phy
+      - qcom,sc7180-qmp-ufs-phy
       - qcom,sc7280-qmp-ufs-phy
       - qcom,sc8180x-qmp-ufs-phy
       - qcom,sc8280xp-qmp-ufs-phy
@@ -38,15 +39,12 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 1
+    minItems: 2
     maxItems: 3
 
   clock-names:
-    minItems: 1
-    items:
-      - const: ref
-      - const: ref_aux
-      - const: qref
+    minItems: 2
+    maxItems: 3
 
   power-domains:
     maxItems: 1
@@ -86,22 +84,9 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8998-qmp-ufs-phy
               - qcom,sa8775p-qmp-ufs-phy
               - qcom,sc7280-qmp-ufs-phy
-              - qcom,sm8450-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          minItems: 3
-        clock-names:
-          minItems: 3
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
               - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
@@ -112,14 +97,19 @@ allOf:
               - qcom,sm8150-qmp-ufs-phy
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
               - qcom,sm8650-qmp-ufs-phy
     then:
       properties:
         clocks:
-          maxItems: 2
+          minItems: 3
+          maxItems: 3
         clock-names:
-          maxItems: 2
+          items:
+            - const: ref
+            - const: ref_aux
+            - const: qref
 
   - if:
       properties:
@@ -130,22 +120,28 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 1
+          minItems: 2
+          maxItems: 2
         clock-names:
-          maxItems: 1
+          items:
+            - const: ref
+            - const: qref
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
     ufs_mem_phy: phy@1d87000 {
         compatible = "qcom,sc8280xp-qmp-ufs-phy";
         reg = <0x01d87000 0x1000>;
 
-        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-        clock-names = "ref", "ref_aux";
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+                 <&gcc GCC_UFS_REF_CLKREF_CLK>;
+
+        clock-names = "ref", "ref_aux", "qref";
 
         power-domains = <&gcc UFS_PHY_GDSC>;
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 15d82c67f157..1e2d4ddc5391 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,15 +20,12 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
-      - qcom,msm8998-qmp-usb3-phy
-      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
       - qcom,sdx75-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-usb3-uni-phy
@@ -93,7 +90,6 @@ allOf:
               - qcom,ipq8074-qmp-usb3-phy
               - qcom,ipq9574-qmp-usb3-phy
               - qcom,msm8996-qmp-usb3-phy
-              - qcom,msm8998-qmp-usb3-phy
               - qcom,sdx55-qmp-usb3-uni-phy
               - qcom,sdx65-qmp-usb3-uni-phy
               - qcom,sdx75-qmp-usb3-uni-phy
@@ -108,24 +104,6 @@ allOf:
             - const: cfg_ahb
             - const: pipe
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,qcm2290-qmp-usb3-phy
-              - qcom,sm6115-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 4
-        clock-names:
-          items:
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-            - const: pipe
-
   - if:
       properties:
         compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml
new file mode 100644
index 000000000000..54e822c715f3
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3588-hdptx-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC HDMI/eDP Transmitter Combo PHY
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-hdptx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock
+      - description: APB clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: apb
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    items:
+      - description: PHY reset line
+      - description: APB reset line
+      - description: INIT reset line
+      - description: CMN reset line
+      - description: LANE reset line
+      - description: ROPLL reset line
+      - description: LCPLL reset line
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: init
+      - const: cmn
+      - const: lane
+      - const: ropll
+      - const: lcpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Some PHY related data is accessed through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - resets
+  - reset-names
+  - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      phy@fed60000 {
+        compatible = "rockchip,rk3588-hdptx-phy";
+        reg = <0x0 0xfed60000 0x0 0x2000>;
+        clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
+        clock-names = "ref", "apb";
+        #phy-cells = <0>;
+        resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
+                 <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
+                 <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>,
+                 <&cru SRST_HDPTX0_LCPLL>;
+        reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", "lcpll";
+        rockchip,grf = <&hdptxphy_grf>;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
index c7df4cd34197..d9e0b2c48e84 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -24,7 +24,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
index 0942ea60c6cd..108719bde0d0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
@@ -21,7 +21,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
index e3c8bde30559..dc277f2e2edf 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
@@ -21,7 +21,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
index c1b03147e8ec..add83c676327 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
@@ -29,7 +29,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
index 4ec85b8248fa..412bbcc276f3 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -29,7 +29,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index e8abbdad7b5d..0aa1a53012d6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -20,6 +20,7 @@ such as pull-up, multi drive, etc.
 Required properties for iomux controller:
 - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
 		or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
+		or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl"
 - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
   configured in this periph mode. All the periph and bank need to be describe.
 
@@ -120,6 +121,7 @@ Some requirements for using atmel,at91rm9200-pinctrl binding:
 For each bank the required properties are:
 - compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
   "microchip,sam9x60-gpio"
+  or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"
 - reg: physical base address and length of the controller's registers
 - interrupts: interrupt outputs from the controller
 - interrupt-controller: marks the device node as an interrupt controller
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml
new file mode 100644
index 000000000000..98c310a3c63c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW9523/AW9523B I2C GPIO Expander
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function
+  I/O, 256 steps PWM mode and interrupt support.
+
+properties:
+  compatible:
+    const: awinic,aw9523-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    description: |
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Specifies the INTN pin IRQ.
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-5])$"
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the
+          specified pins.
+
+        enum: [ gpio, pwm ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-open-drain: true
+      drive-push-pull: true
+      input-enable: true
+      input-disable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  # Example configuration to drive pins for a keyboard matrix
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        aw9523: gpio-expander@58 {
+                compatible = "awinic,aw9523-pinctrl";
+                reg = <0x58>;
+                interrupt-parent = <&tlmm>;
+                interrupts = <50 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 16>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+
+                keyboard-matrix-col-pins {
+                        pins = "gpio8", "gpio9", "gpio10", "gpio11",
+                               "gpio12", "gpio13", "gpio14", "gpio15";
+                        function = "gpio";
+                        input-disable;
+                        output-low;
+                };
+
+                keyboard-matrix-row-pins {
+                        pins = "gpio0", "gpio1", "gpio2", "gpio3",
+                               "gpio4", "gpio5", "gpio6", "gpio7";
+                        function = "gpio";
+                        bias-pull-up;
+                        drive-open-drain;
+                        input-enable;
+                };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
index bb61a30321a1..482acda88e73 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -93,7 +93,8 @@ properties:
 
           input-schmitt-disable: true
 
-          input-debounce: true
+          input-debounce:
+            maxItems: 1
 
           output-low: true
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
index 7f30ec2f1e54..700ac86c26b6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -45,7 +45,8 @@ properties:
     maxItems: 1
 
   gpio-reserved-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 60
 
   vdd-supply:
     description:
@@ -85,6 +86,8 @@ patternProperties:
 
       bias-disable: true
 
+      input-enable: true
+
       output-high: true
 
       output-low: true
@@ -133,6 +136,23 @@ examples:
         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
         interrupt-controller;
         vdd-supply = <&p3v3>;
-        gpio-reserved-ranges = <5 1>;
+        gpio-reserved-ranges = <1 2>, <6 1>, <10 1>, <15 1>;
+
+        pinctrl-0 = <&U62160_pins>, <&U62160_ipins>;
+        pinctrl-names = "default";
+
+        U62160_pins: cfg-pins {
+          pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
+
+        U62160_ipins: icfg-pins {
+          pins = "gp04", "gp17", "gp21", "gp52", "gp53";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
       };
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
deleted file mode 100644
index 7ca4f6118d9a..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Freescale i.MX6 UltraLite IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or
-  "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller.
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX6 UltraLite
-  Reference Manual for detailed CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (0 << 6)
-PAD_CTL_SPEED_MED               (1 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_260ohm              (1 << 3)
-PAD_CTL_DSE_130ohm              (2 << 3)
-PAD_CTL_DSE_87ohm               (3 << 3)
-PAD_CTL_DSE_65ohm               (4 << 3)
-PAD_CTL_DSE_52ohm               (5 << 3)
-PAD_CTL_DSE_43ohm               (6 << 3)
-PAD_CTL_DSE_37ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
new file mode 100644
index 000000000000..906b264a9e3c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX6UL IOMUX Controller
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6ul-iomuxc
+      - fsl,imx6ull-iomuxc-snvs
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer
+          CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX6UL Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied:
+                  PAD_CTL_HYS                     (1 << 16)
+                  PAD_CTL_PUS_100K_DOWN           (0 << 14)
+                  PAD_CTL_PUS_47K_UP              (1 << 14)
+                  PAD_CTL_PUS_100K_UP             (2 << 14)
+                  PAD_CTL_PUS_22K_UP              (3 << 14)
+                  PAD_CTL_PUE                     (1 << 13)
+                  PAD_CTL_PKE                     (1 << 12)
+                  PAD_CTL_ODE                     (1 << 11)
+                  PAD_CTL_SPEED_LOW               (0 << 6)
+                  PAD_CTL_SPEED_MED               (1 << 6)
+                  PAD_CTL_SPEED_HIGH              (3 << 6)
+                  PAD_CTL_DSE_DISABLE             (0 << 3)
+                  PAD_CTL_DSE_260ohm              (1 << 3)
+                  PAD_CTL_DSE_130ohm              (2 << 3)
+                  PAD_CTL_DSE_87ohm               (3 << 3)
+                  PAD_CTL_DSE_65ohm               (4 << 3)
+                  PAD_CTL_DSE_52ohm               (5 << 3)
+                  PAD_CTL_DSE_43ohm               (6 << 3)
+                  PAD_CTL_DSE_37ohm               (7 << 3)
+                  PAD_CTL_SRE_FAST                (1 << 0)
+                  PAD_CTL_SRE_SLOW                (0 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: pinctrl@20e0000 {
+      compatible = "fsl,imx6ul-iomuxc";
+      reg = <0x020e0000 0x4000>;
+
+      mux_uart: uartgrp {
+        fsl,pins = <
+          0x0084 0x0310 0x0000 0 0 0x1b0b1
+          0x0088 0x0314 0x0624 0 3 0x1b0b1
+        >;
+      };
+    };
+  - |
+    iomuxc_snvs: pinctrl@2290000 {
+      compatible = "fsl,imx6ull-iomuxc-snvs";
+      reg = <0x02290000 0x4000>;
+
+      pinctrl_snvs_usbc_det: snvsusbcdetgrp {
+        fsl,pins = <
+          0x0010 0x0054 0x0000 0x5 0x0 0x130b0
+        >;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
new file mode 100644
index 000000000000..5f00604bf48c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 pin controller
+
+description: >
+  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
+  to a system-controller block called OLB.
+
+  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
+  muxing supports two functions for each pin: first is GPIO, second is
+  pin-dependent.
+
+  Pins and groups are bijective.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+$ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mobileye,eyeq5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "-pins?$":
+    type: object
+    description: Pin muxing configuration.
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index 3e8472898800..b55d9c316659 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -152,7 +152,6 @@ patternProperties:
         description:
           Debouncing periods in microseconds, one period per interrupt
           bank found in the controller
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 4
 
@@ -160,7 +159,6 @@ patternProperties:
         description: |
           0: Low rate
           1: High rate
-        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
       drive-strength:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
index 7b7f840ffc4c..08442c880f07 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -103,7 +103,8 @@ patternProperties:
         items:
           pattern: "^gpio1?[0-9]{1,2}$"
 
-      input-debounce: true
+      input-debounce:
+        maxItems: 1
 
     additionalProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
index f3deda9f7127..db8224dfba2c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -10,18 +10,21 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-$ref: nvidia,tegra234-pinmux-common.yaml
-
 properties:
   compatible:
     const: nvidia,tegra234-pinmux-aon
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^pinmux(-[a-z0-9-]+)?$":
     type: object
 
     # pin groups
     additionalProperties:
+      $ref: nvidia,tegra234-pinmux-common.yaml
+
       properties:
         nvidia,pins:
           items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
index 4f9de78085e5..8cf9e4c915ff 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -10,57 +10,43 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-properties:
-  reg:
-    items:
-      - description: pinmux registers
-
-patternProperties:
-  "^pinmux(-[a-z0-9-]+)?$":
-    type: object
-
-    # pin groups
-    additionalProperties:
-      $ref: nvidia,tegra-pinmux-common.yaml
-      # We would typically use unevaluatedProperties here but that has the
-      # downside that all the properties in the common bindings become valid
-      # for all chip generations. In this case, however, we want the per-SoC
-      # bindings to be able to override which of the common properties are
-      # allowed, since not all pinmux generations support the same sets of
-      # properties. This way, the common bindings define the format of the
-      # properties but the per-SoC bindings define which of them apply to a
-      # given chip.
-      additionalProperties: false
-      properties:
-        nvidia,function:
-          enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
-                  eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
-                  pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
-                  sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
-                  usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
-                  i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
-                  dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
-                  ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
-                  displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
-                  tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+$ref: nvidia,tegra-pinmux-common.yaml
 
-        # out of the common properties, only these are allowed for Tegra234
-        nvidia,pins: true
-        nvidia,pull: true
-        nvidia,tristate: true
-        nvidia,schmitt: true
-        nvidia,enable-input: true
-        nvidia,open-drain: true
-        nvidia,lock: true
-        nvidia,drive-type: true
-        nvidia,io-hv: true
-
-      required:
-        - nvidia,pins
+properties:
+  nvidia,function:
+    enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+            eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+            pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+            sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+            usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+            i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+            dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+            ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+            displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+            tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+  # out of the common properties, only these are allowed for Tegra234
+  nvidia,pins: true
+  nvidia,pull: true
+  nvidia,tristate: true
+  nvidia,schmitt: true
+  nvidia,enable-input: true
+  nvidia,open-drain: true
+  nvidia,lock: true
+  nvidia,drive-type: true
+  nvidia,io-hv: true
 
 required:
-  - compatible
-  - reg
+  - nvidia,pins
+
+# We would typically use unevaluatedProperties here but that has the
+# downside that all the properties in the common bindings become valid
+# for all chip generations. In this case, however, we want the per-SoC
+# bindings to be able to override which of the common properties are
+# allowed, since not all pinmux generations support the same sets of
+# properties. This way, the common bindings define the format of the
+# properties but the per-SoC bindings define which of them apply to a
+# given chip.
+additionalProperties: false
 
-additionalProperties: true
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
index 17b865ecfcda..f5a3a881dec4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -10,18 +10,21 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-$ref: nvidia,tegra234-pinmux-common.yaml
-
 properties:
   compatible:
     const: nvidia,tegra234-pinmux
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^pinmux(-[a-z0-9-]+)?$":
     type: object
 
     # pin groups
     additionalProperties:
+      $ref: nvidia,tegra234-pinmux-common.yaml
+
       properties:
         nvidia,pins:
           items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index be81ed22a036..d0af21a564b4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -97,7 +97,7 @@ properties:
     description: disable schmitt-trigger mode
 
   input-debounce:
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Takes the debounce time in usec as argument or 0 to disable
       debouncing
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb08ca5a1509..bb675c8ec220 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -17,7 +17,7 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,sm4450-pinctrl
+    const: qcom,sm4450-tlmm
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
index 181cd1676c0a..5d84364d1358 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -46,6 +46,7 @@ properties:
       - renesas,pfc-r8a779a0    # R-Car V3U
       - renesas,pfc-r8a779f0    # R-Car S4-8
       - renesas,pfc-r8a779g0    # R-Car V4H
+      - renesas,pfc-r8a779h0    # R-Car V4M
       - renesas,pfc-sh73a0      # SH-Mobile AG5
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml
similarity index 98%
rename from Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
rename to Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml
index d2676f92ef5b..de6c10ba36c4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/xlnx,pinctrl-zynq.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xilinx Zynq Pinctrl
@@ -28,7 +28,7 @@ description: |
 
 properties:
   compatible:
-    const: xlnx,zynq-pinctrl
+    const: xlnx,pinctrl-zynq
 
   reg:
     description: Specifies the base address and size of the SLCR space.
@@ -181,7 +181,7 @@ examples:
   - |
     #include <dt-bindings/pinctrl/pinctrl-zynq.h>
     pinctrl0: pinctrl@700 {
-       compatible = "xlnx,zynq-pinctrl";
+       compatible = "xlnx,pinctrl-zynq";
        reg = <0x700 0x200>;
        syscon = <&slcr>;
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 2ff246cf8b81..929b7ef9c1bc 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -24,6 +24,8 @@ properties:
           - qcom,msm8917-rpmpd
           - qcom,msm8939-rpmpd
           - qcom,msm8953-rpmpd
+          - qcom,msm8974-rpmpd
+          - qcom,msm8974pro-pma8084-rpmpd
           - qcom,msm8976-rpmpd
           - qcom,msm8994-rpmpd
           - qcom,msm8996-rpmpd
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index 0720b54881c2..e76fb273490f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -45,6 +45,7 @@ properties:
       - renesas,r8a779a0-sysc # R-Car V3U
       - renesas,r8a779f0-sysc # R-Car S4-8
       - renesas,r8a779g0-sysc # R-Car V4H
+      - renesas,r8a779h0-sysc # R-Car V4M
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt
index 75bc20b95688..a6c8978964aa 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -27,7 +27,7 @@ List of legacy properties and respective binding document
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
-5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
 6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
 
 Examples
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
new file mode 100644
index 000000000000..0e92868a2b68
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCDC's PWM controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block
+  generates the LCD contrast control signal (LCD_PWM) that controls the
+  display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be
+  converted to an analog voltage with a simple passive filter. LCD display
+  panels have different backlight specifications in terms of minimum/maximum
+  values for PWM frequency. If the LCDC PWM frequency range does not match the
+  LCD display panel, it is possible to use the standalone PWM Controller to
+  drive the backlight.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-pwm
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - "#pwm-cells"
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
deleted file mode 100644
index afa501bf7f94..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
-
-The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
-See ../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,hlcdc-pwm"
- - pinctr-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the pinctrl states described by pinctrl
-   default.
- - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
-   bindings defined in pwm.yaml in this directory.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml
new file mode 100644
index 000000000000..ba6325575ea0
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA PWM
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa250-pwm
+      - marvell,pxa270-pwm
+      - marvell,pxa168-pwm
+      - marvell,pxa910-pwm
+
+  reg:
+    # Length should be 0x10
+    maxItems: 1
+
+  "#pwm-cells":
+    # Used for specifying the period length in nanoseconds
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/pxa-clock.h>
+
+    pwm0: pwm@40b00000 {
+      compatible = "marvell,pxa250-pwm";
+      reg = <0x40b00000 0x10>;
+      #pwm-cells = <1>;
+      clocks = <&clks CLK_PWM0>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
index 0fbe8a6469eb..a5c308801619 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -24,6 +24,7 @@ properties:
           - mediatek,mt7629-pwm
           - mediatek,mt7981-pwm
           - mediatek,mt7986-pwm
+          - mediatek,mt7988-pwm
           - mediatek,mt8183-pwm
           - mediatek,mt8365-pwm
           - mediatek,mt8516-pwm
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
index afcdeed4e88a..bc813fe74fab 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -52,6 +52,9 @@ properties:
       - const: main
       - const: mm
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml
new file mode 100644
index 000000000000..52a59d245cdb
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores PWM controller
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+description:
+  The OpenCores PTC ip core contains a PWM controller. When operating in PWM
+  mode, the PTC core generates binary signal with user-programmable low and
+  high periods. All PTC counters and registers are 32-bit.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7100-pwm
+          - starfive,jh7110-pwm
+          - starfive,jh8100-pwm
+      - const: opencores,pwm-v1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@12490000 {
+        compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+        reg = <0x12490000 0x10000>;
+        clocks = <&clkgen 181>;
+        resets = <&rstgen 109>;
+        #pwm-cells = <3>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
index 527864a4d855..1d71d4f8f328 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
@@ -9,9 +9,6 @@ title: Amlogic PWM
 maintainers:
   - Heiner Kallweit <hkallweit1@gmail.com>
 
-allOf:
-  - $ref: pwm.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -24,31 +21,40 @@ properties:
           - amlogic,meson-g12a-ee-pwm
           - amlogic,meson-g12a-ao-pwm-ab
           - amlogic,meson-g12a-ao-pwm-cd
-          - amlogic,meson-s4-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson-gx-pwm
           - const: amlogic,meson-gxbb-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson-gx-ao-pwm
           - const: amlogic,meson-gxbb-ao-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson8-pwm
           - const: amlogic,meson8b-pwm
+        deprecated: true
+      - enum:
+          - amlogic,meson8-pwm-v2
+          - amlogic,meson-s4-pwm
+      - items:
+          - enum:
+              - amlogic,meson8b-pwm-v2
+              - amlogic,meson-gxbb-pwm-v2
+              - amlogic,meson-axg-pwm-v2
+              - amlogic,meson-g12-pwm-v2
+          - const: amlogic,meson8-pwm-v2
 
   reg:
     maxItems: 1
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 4
 
   clock-names:
-    oneOf:
-      - items:
-          - enum: [clkin0, clkin1]
-      - items:
-          - const: clkin0
-          - const: clkin1
+    minItems: 1
+    maxItems: 2
 
   "#pwm-cells":
     const: 3
@@ -57,6 +63,79 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-pwm
+              - amlogic,meson8b-pwm
+              - amlogic,meson-gxbb-pwm
+              - amlogic,meson-gxbb-ao-pwm
+              - amlogic,meson-axg-ee-pwm
+              - amlogic,meson-axg-ao-pwm
+              - amlogic,meson-g12a-ee-pwm
+              - amlogic,meson-g12a-ao-pwm-ab
+              - amlogic,meson-g12a-ao-pwm-cd
+    then:
+      # Obsolete historic bindings tied to the driver implementation
+      # The clocks provided here are meant to be matched with the input
+      # known (hard-coded) in the driver and used to select pwm clock
+      # source. Currently, the linux driver ignores this.
+      # This is kept to maintain ABI backward compatibility.
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          oneOf:
+            - items:
+                - enum: [clkin0, clkin1]
+            - items:
+                - const: clkin0
+                - const: clkin1
+
+  # Newer binding where clock describe the actual clock inputs of the pwm
+  # block. These are necessary but some inputs may be grounded.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-pwm-v2
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: input clock 0 of the pwm block
+            - description: input clock 1 of the pwm block
+            - description: input clock 2 of the pwm block
+            - description: input clock 3 of the pwm block
+        clock-names: false
+      required:
+        - clocks
+
+  # Newer IP block take a single input per channel, instead of 4 inputs
+  # for both channels
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-s4-pwm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: input clock of PWM channel A
+            - description: input clock of PWM channel B
+        clock-names: false
+      required:
+        - clocks
+
 additionalProperties: false
 
 examples:
@@ -68,3 +147,17 @@ examples:
       clock-names = "clkin0", "clkin1";
       #pwm-cells = <3>;
     };
+  - |
+    pwm@2000 {
+      compatible = "amlogic,meson8-pwm-v2";
+      reg = <0x1000 0x10>;
+      clocks = <&xtal>, <0>, <&fdiv4>, <&fdiv5>;
+      #pwm-cells = <3>;
+    };
+  - |
+    pwm@1000 {
+      compatible = "amlogic,meson-s4-pwm";
+      reg = <0x1000 0x10>;
+      clocks = <&pwm_src_a>, <&pwm_src_b>;
+      #pwm-cells = <3>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pxa-pwm.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
deleted file mode 100644
index 5ae9f1e3c338..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Marvell PWM controller
-
-Required properties:
-- compatible: should be one or more of:
-  - "marvell,pxa250-pwm"
-  - "marvell,pxa270-pwm"
-  - "marvell,pxa168-pwm"
-  - "marvell,pxa910-pwm"
-- reg: Physical base address and length of the registers used by the PWM channel
-  Note that one device instance must be created for each PWM that is used, so the
-  length covers only the register window for one PWM output, not that of the
-  entire PWM controller.  Currently length is 0x10 for all supported devices.
-- #pwm-cells: Should be 1.  This cell is used to specify the period in
-  nanoseconds.
-
-Example PWM device node:
-
-pwm0: pwm@40b00000 {
-	compatible = "marvell,pxa250-pwm";
-	reg = <0x40b00000 0x10>;
-	#pwm-cells = <1>;
-};
-
-Example PWM client node:
-
-backlight {
-	compatible = "pwm-backlight";
-	pwms = <&pwm0 5000000>;
-	...
-}
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index f4c1f36e52e9..a34e85754658 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -47,6 +47,7 @@ properties:
         1: HIGH
       Default is LOW if nothing else is specified.
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
     maxItems: 8
     items:
       enum: [0, 1]
@@ -57,7 +58,8 @@ properties:
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
-    maxItems: 8
+    minItems: 2
+    maxItems: 256
     items:
       items:
         - description: Voltage in microvolts
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml
new file mode 100644
index 000000000000..e6ffbc2a2298
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon Buck Regulators with PMBUS interfaces
+
+maintainers:
+  - Not Me.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - infineon,ir38060
+      - infineon,ir38064
+      - infineon,ir38164
+      - infineon,ir38263
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@34 {
+        compatible = "infineon,ir38060";
+        reg = <0x34>;
+
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
deleted file mode 100644
index 451cc4e86b01..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-MCP16502 PMIC
-
-Required properties:
-- compatible: "microchip,mcp16502"
-- reg: I2C slave address
-- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
-	     property is optional;
-- regulators: A node that houses a sub-node for each regulator within
-              the device. Each sub-node is identified using the node's
-              name. The content of each sub-node is defined by the
-              standard binding for regulators; see regulator.txt.
-
-Regulators of MCP16502 PMIC:
-1) VDD_IO	- Buck (1.2 - 3.7 V)
-2) VDD_DDR	- Buck (0.6 - 1.85 V)
-3) VDD_CORE	- Buck (0.6 - 1.85 V)
-4) VDD_OTHER	- BUCK (0.6 - 1.85 V)
-5) LDO1		- LDO  (1.2 - 3.7 V)
-6) LDO2		- LDO  (1.2 - 3.7 V)
-
-Regulator modes:
-2 - FPWM: higher precision, higher consumption
-4 - AutoPFM: lower precision, lower consumption
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-mcp16502@5b {
-	compatible = "microchip,mcp16502";
-	reg = <0x5b>;
-	status = "okay";
-	lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
-
-	regulators {
-		VDD_IO {
-			regulator-name = "VDD_IO";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_DDR {
-			regulator-name = "VDD_DDR";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_CORE {
-			regulator-name = "VDD_CORE";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_OTHER {
-			regulator-name = "VDD_OTHER";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-	};
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
new file mode 100644
index 000000000000..1aca3646789e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCP16502 - High-Performance PMIC
+
+maintainers:
+  - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+  The MCP16502 is an optimally integrated PMIC compatible
+  with Microchip's eMPUs(Embedded Microprocessor Units),
+  requiring Dynamic Voltage Scaling (DVS) with the use
+  of High-Performance mode (HPM).
+
+properties:
+  compatible:
+    const: microchip,mcp16502
+
+  lpm-gpios:
+    maxItems: 1
+    description: GPIO for LPM pin.
+      Note that this GPIO must remain high during
+      suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: List of regulators and its properties.
+
+    patternProperties:
+      "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-initial-mode:
+            enum: [2, 4]
+            default: 2
+            description: Initial operating mode
+
+          regulator-allowed-modes:
+            items:
+              enum: [2, 4]
+            description: Supported modes
+              2 - FPWM higher precision, higher consumption
+              4 - AutoPFM lower precision, lower consumption
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@5b {
+            compatible = "microchip,mcp16502";
+            reg = <0x5b>;
+
+            regulators {
+                VDD_IO {
+                    regulator-name = "VDD_IO";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_DDR {
+                    regulator-name = "VDD_DDR";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_CORE {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <1150000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_OTHER {
+                    regulator-name = "VDD_OTHER";
+                    regulator-min-microvolt = <1050000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3700000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index 534f87e98716..33ae1f786802 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -19,8 +19,15 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-vbus-reg
+    oneOf:
+      - enum:
+          - qcom,pm8150b-vbus-reg
+      - items:
+          - enum:
+              - qcom,pm4125-vbus-reg
+              - qcom,pm6150-vbus-reg
+              - qcom,pmi632-vbus-reg
+          - const: qcom,pm8150b-vbus-reg
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
new file mode 100644
index 000000000000..6a6d1a3d6fa7
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65132 Dual Output Power Regulators
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+description: |
+  The TPS65132 is designed to supply positive/negative driven applications.
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps65132
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65132
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+      active-discharge-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to actively discharge the delay mechanism.
+
+      ti,active-discharge-time-us:
+        description: Regulator active discharge time in microseconds.
+
+    dependencies:
+      active-discharge-gpios: [ 'ti,active-discharge-time-us' ]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "ti,tps65132";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                regulator-active-discharge = <0>;
+                enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
+            };
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
deleted file mode 100644
index 3a3505520c69..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-TPS65132 regulators
-
-Required properties:
-- compatible: "ti,tps65132"
-- reg: I2C slave address
-
-Optional Subnode:
-Device supports two regulators OUTP and OUTN. A sub node within the
-   device node describe the properties of these regulators. The sub-node
-   names must be as follows:
-	-For regulator outp, the sub node name should be "outp".
-	-For regulator outn, the sub node name should be "outn".
-
--enable-gpios:(active high, output) Regulators are controlled by the input pins.
-   If it is connected to GPIO through host system then provide the
-   gpio number as per gpio.txt.
--active-discharge-gpios: (active high, output) Some configurations use delay mechanisms
-  on the enable pin, to keep the regulator enabled for some time after
-  the enable signal goes low. This GPIO is used to actively discharge
-  the delay mechanism. Requires specification of ti,active-discharge-time-us
--ti,active-discharge-time-us: how long the active discharge gpio should be
-  asserted for during active discharge, in microseconds.
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-	tps65132@3e {
-		compatible = "ti,tps65132";
-		reg = <0x3e>;
-
-		outp {
-			regulator-name = "outp";
-			regulator-boot-on;
-			regulator-always-on;
-			enable-gpios = <&gpio 23 0>;
-		};
-
-		outn {
-			regulator-name = "outn";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-active-discharge = <0>;
-			enable-gpios = <&gpio 40 0>;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
index 09102dda4942..507f98f73d23 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -47,7 +47,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       If present, name (or relative path) of the file within the
       firmware search path containing the firmware image used when
@@ -115,7 +115,7 @@ patternProperties:
         maxItems: 1
 
       firmware-name:
-        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
         description:
           If present, name (or relative path) of the file within the
           firmware search path containing the firmware image used when
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
index 884158bccd50..3766d4513b37 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -18,7 +18,6 @@ properties:
     const: qcom,glink-rpm
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description:
       Name of the edge, used for debugging and identification purposes. The
       node name will be used if this is not present.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
index eb868a7ff4cd..ad45fd00ae34 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
@@ -46,7 +46,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
index c054b84fdcd5..66b455d0a8e3 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -45,7 +45,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index b6bd33438584..9381c7022ff4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -80,7 +80,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       The name of the firmware which should be loaded for this remote
       processor.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
index 4744a37b2b5d..45ee9fbe0966 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
@@ -42,7 +42,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
index 2328ee6a533f..4c7341fba99e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
@@ -47,7 +47,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
index f7e40fb166da..c1a3cc308bdb 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
@@ -42,7 +42,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml
index 3e4a03eb4532..7286b2baa19f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml
@@ -36,7 +36,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
   smd-edge: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
index b656700d2cb8..cc7942df6862 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
@@ -46,7 +46,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
index 42d199765b81..c795ba3dee03 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -47,7 +47,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
index bd4a00e9bb24..e6b506fd1fa0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -19,6 +19,11 @@ properties:
       - qcom,sm8550-adsp-pas
       - qcom,sm8550-cdsp-pas
       - qcom,sm8550-mpss-pas
+      - qcom,sm8650-adsp-pas
+      - qcom,sm8650-cdsp-pas
+      - qcom,sm8650-mpss-pas
+      - qcom,x1e80100-adsp-pas
+      - qcom,x1e80100-cdsp-pas
 
   reg:
     maxItems: 1
@@ -49,6 +54,8 @@ properties:
       - description: Memory region for main Firmware authentication
       - description: Memory region for Devicetree Firmware authentication
       - description: DSM Memory region
+      - description: DSM Memory region 2
+      - description: Memory region for Qlink Logging
 
 required:
   - compatible
@@ -63,6 +70,9 @@ allOf:
           enum:
             - qcom,sm8550-adsp-pas
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-adsp-pas
+            - qcom,x1e80100-adsp-pas
+            - qcom,x1e80100-cdsp-pas
     then:
       properties:
         interrupts:
@@ -71,7 +81,26 @@ allOf:
           maxItems: 5
         memory-region:
           maxItems: 2
-    else:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-mpss-pas
+    then:
       properties:
         interrupts:
           minItems: 6
@@ -79,12 +108,29 @@ allOf:
           minItems: 6
         memory-region:
           minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-mpss-pas
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          minItems: 5
+          maxItems: 5
 
   - if:
       properties:
         compatible:
           enum:
             - qcom,sm8550-adsp-pas
+            - qcom,sm8650-adsp-pas
+            - qcom,x1e80100-adsp-pas
     then:
       properties:
         power-domains:
@@ -101,6 +147,7 @@ allOf:
         compatible:
           enum:
             - qcom,sm8550-mpss-pas
+            - qcom,sm8650-mpss-pas
     then:
       properties:
         power-domains:
@@ -116,6 +163,8 @@ allOf:
         compatible:
           enum:
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-cdsp-pas
+            - qcom,x1e80100-cdsp-pas
     then:
       properties:
         power-domains:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
index fe4a2a1a0dc3..062bf28c57b8 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -51,7 +51,7 @@ properties:
       - const: stop-ack
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Relative firmware image path for the WCNSS core. Defaults to
       "/*(DEBLOBBED)*/".
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
index 25f8658e216f..48a49c516b62 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
@@ -1,9 +1,6 @@
 TI Davinci DSP devices
 =======================
 
-Binding status: Unstable - Subject to changes for DT representation of clocks
-			   and resets
-
 The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
 is used to offload some of the processor-intensive tasks or algorithms, for
 achieving various system level goals.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
new file mode 100644
index 000000000000..062b4518347b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 reset controller
+
+description:
+  The EyeQ5 reset driver handles three reset domains. Its registers live in a
+  shared region called OLB.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+properties:
+  compatible:
+    const: mobileye,eyeq5-reset
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: d0
+      - const: d1
+      - const: d2
+
+  "#reset-cells":
+    const: 2
+    description:
+      The first cell is the domain (0 to 2 inclusive) and the second one is the
+      reset index inside that domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/renesas,rst.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index e7e487247751..58b4a45d3380 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -50,6 +50,7 @@ properties:
       - renesas,r8a779a0-rst      # R-Car V3U
       - renesas,r8a779f0-rst      # R-Car S4-8
       - renesas,r8a779g0-rst      # R-Car V4H
+      - renesas,r8a779h0-rst      # R-Car V4M
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
new file mode 100644
index 000000000000..76e1931f0908
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 SoC Reset Controller
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstgen: reset-controller@c00 {
+        compatible = "sophgo,sg2042-reset";
+        reg = <0xc00 0xc>;
+        #reset-cells = <1>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
index 9d8670c00e3b..d87dd50f1a4b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -75,6 +75,10 @@ properties:
       - riscv,sv57
       - riscv,none
 
+  reg:
+    description:
+      The hart ID of this CPU node.
+
   riscv,cbom-block-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -106,7 +110,11 @@ properties:
         const: 1
 
       compatible:
-        const: riscv,cpu-intc
+        oneOf:
+          - items:
+              - const: andestech,cpu-intc
+              - const: riscv,cpu-intc
+          - const: riscv,cpu-intc
 
       interrupt-controller: true
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
index 63d81dc895e5..468c646247aa 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -477,5 +477,12 @@ properties:
             latency, as ratified in commit 56ed795 ("Update
             riscv-crypto-spec-vector.adoc") of riscv-crypto.
 
+        - const: xandespmu
+          description:
+            The Andes Technology performance monitor extension for counter overflow
+            and privilege mode filtering. For more details, see Counter Related
+            Registers in the AX45MP datasheet.
+            https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
+
 additionalProperties: true
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
index 3ce45456d867..b38f8252342e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
@@ -21,6 +21,10 @@ properties:
           - enum:
               - microchip,sama7g5-trng
           - const: atmel,at91sam9g45-trng
+      - items:
+          - enum:
+              - microchip,sam9x7-trng
+          - const: microchip,sam9x60-trng
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
deleted file mode 100644
index 2405e35a1bc0..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
-        "abracon,abx80x"
-        "abracon,ab0801"
-        "abracon,ab0803"
-        "abracon,ab0804"
-        "abracon,ab0805"
-        "abracon,ab1801"
-        "abracon,ab1803"
-        "abracon,ab1804"
-        "abracon,ab1805"
-        "microcrystal,rv1805"
-	Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
-                          resistor, the other values are in kOhm.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
new file mode 100644
index 000000000000..355b0598411a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers:
+  - linux-rtc@vger.kernel.org
+
+properties:
+  compatible:
+    description:
+      The wildcard 'abracon,abx80x' may be used to support a mix
+      of different abracon rtc`s. In this case the driver
+      must perform auto-detection from ID register.
+    enum:
+      - abracon,abx80x
+      - abracon,ab0801
+      - abracon,ab0803
+      - abracon,ab0804
+      - abracon,ab0805
+      - abracon,ab1801
+      - abracon,ab1803
+      - abracon,ab1804
+      - abracon,ab1805
+      - microcrystal,rv1805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  abracon,tc-diode:
+    description:
+      Trickle-charge diode type.
+      Required to enable charging backup battery.
+
+      Supported are 'standard' diodes with a 0.6V drop
+      and 'schottky' diodes with a 0.3V drop.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - standard
+      - schottky
+
+  abracon,tc-resistor:
+    description:
+      Trickle-charge resistor value in kOhm.
+      Required to enable charging backup battery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 3, 6, 11]
+
+dependentRequired:
+  abracon,tc-diode: ["abracon,tc-resistor"]
+  abracon,tc-resistor: ["abracon,tc-diode"]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - abracon,abx80x
+                - abracon,ab0804
+                - abracon,ab1804
+                - abracon,ab0805
+                - abracon,ab1805
+    then:
+      properties:
+        abracon,tc-diode: false
+        abracon,tc-resistor: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@69 {
+            compatible = "abracon,abx80x";
+            reg = <0x69>;
+            abracon,tc-diode = "schottky";
+            abracon,tc-resistor = <3>;
+            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
index b80b85c394ac..a7f6c1d1a08a 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -19,7 +19,9 @@ properties:
       - items:
           - const: atmel,at91sam9260-rtt
       - items:
-          - const: microchip,sam9x60-rtt
+          - enum:
+              - microchip,sam9x60-rtt
+              - microchip,sam9x7-rtt
           - const: atmel,at91sam9260-rtt
       - items:
           - const: microchip,sama7g5-rtt
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml
new file mode 100644
index 000000000000..75624ddf6d4d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2712 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Ran Bi <ran.bi@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt2712-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10011000 {
+        compatible = "mediatek,mt2712-rtc";
+        reg = <0x10011000 0x1000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml
new file mode 100644
index 000000000000..e74dfc161cfc
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7622 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7622-rtc
+      - const: mediatek,soc-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10212800 {
+        compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc";
+        reg = <0x10212800 0x200>;
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RTC>;
+        clock-names = "rtc";
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
deleted file mode 100644
index c33d87e5e753..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-
-Example:
-
-rtc: rtc@10011000 {
-	compatible = "mediatek,mt2712-rtc";
-	reg = <0 0x10011000 0 0x1000>;
-	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
deleted file mode 100644
index 09fe8f51476f..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-- clocks	    : Specifies list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : Should contain "rtc" entries
-
-Example:
-
-rtc: rtc@10212800 {
-	compatible = "mediatek,mt7622-rtc",
-		     "mediatek,soc-rtc";
-	reg = <0 0x10212800 0 0x200>;
-	interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&topckgen CLK_TOP_RTC>;
-	clock-names = "rtc";
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
index a16c355dcd11..fcf52d2cac9e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
@@ -12,7 +12,7 @@ allOf:
 maintainers:
   - Alessandro Zummo <a.zummo@towertech.it>
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
index d1f5eb996dba..01cc90fee81e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -18,7 +18,13 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,zynqmp-rtc
+    oneOf:
+      - const: xlnx,zynqmp-rtc
+      - items:
+          - enum:
+              - xlnx,versal-rtc
+              - xlnx,versal-net-rtc
+          - const: xlnx,zynqmp-rtc
 
   reg:
     maxItems: 1
@@ -48,6 +54,9 @@ properties:
     default: 0x198233
     deprecated: true
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
index 65cb2e5c5eee..eb2992a447d7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 maintainers:
-  - Richard Genoud <richard.genoud@gmail.com>
+  - Richard Genoud <richard.genoud@bootlin.com>
 
 properties:
   compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/cdns,uart.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index e35ad1109efc..2129247d7c81 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -55,6 +55,7 @@ required:
 
 allOf:
   - $ref: serial.yaml#
+  - $ref: rs485.yaml#
   - if:
       properties:
         compatible:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 3a5b59f5d3e3..3f9ace89dee9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -30,6 +30,7 @@ properties:
       - items:
           - enum:
               - fsl,imx93-lpuart
+              - fsl,imx95-lpuart
           - const: fsl,imx8ulp-lpuart
           - const: fsl,imx7ulp-lpuart
       - items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/renesas,hscif.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 2046e2dc0a3d..9480ed30915c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -59,6 +59,7 @@ properties:
               - renesas,hscif-r8a779a0     # R-Car V3U
               - renesas,hscif-r8a779f0     # R-Car S4-8
               - renesas,hscif-r8a779g0     # R-Car V4H
+              - renesas,hscif-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-hscif # R-Car Gen4
           - const: renesas,hscif           # generic HSCIF compatible UART
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 133259ed3a34..0f0131026911 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -143,6 +143,8 @@ allOf:
     then:
       required:
         - samsung,uart-fifosize
+      properties:
+        reg-io-width: false
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/serial.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/serial.yaml
index 65804ca274ae..ffc9198ae214 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/serial.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/serial.yaml
@@ -88,7 +88,7 @@ properties:
       TX FIFO threshold configuration (in bytes).
 
 patternProperties:
-  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$":
+  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
     if:
       type: object
     then:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/st,asc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/st,asc.yaml
new file mode 100644
index 000000000000..f2083388f36b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/st,asc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SoCs Serial Port
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: st,asc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  st,hw-flow-ctrl:
+    description: When set, enable hardware flow control.
+    type: boolean
+
+  st,force-m1:
+    description: When set, force asc to be in Mode-1. This is recommended for
+      high bit rates above 19.2K.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stih407-clks.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    serial@9830000 {
+        compatible = "st,asc";
+        reg = <0x9830000 0x2c>;
+        interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 1df8ffe95fc6..62f97da1b2fd 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -58,6 +58,9 @@ properties:
 
   wakeup-source: true
 
+  power-domains:
+    maxItems: 1
+
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/st-asc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/serial/st-asc.txt
deleted file mode 100644
index a1b9b6f3490a..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/serial/st-asc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-*st-asc(Serial Port)
-
-Required properties:
-- compatible : Should be "st,asc".
-- reg, reg-names, interrupts, interrupt-names	: Standard way to define device
-			resources with names. look in
-			Documentation/devicetree/bindings/resource-names.txt
-
-Optional properties:
-- st,hw-flow-ctrl	bool flag to enable hardware flow control.
-- st,force-m1		bool flat to force asc to be in Mode-1 recommended
-			for high bit rates (above 19.2K)
-Example:
-serial@fe440000{
-    compatible    = "st,asc";
-    reg         = <0xfe440000 0x2c>;
-    interrupts     =  <0 209 0>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
index 397f75909b20..ce1a6505eb51 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -51,7 +51,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^clock-controller@[0-9a-z]+$":
+  "^clock-controller@[0-9a-f]+$":
     $ref: /schemas/clock/fsl,flexspi-clock.yaml#
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
index 8d088b5fe823..a6a511b00a12 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -41,7 +41,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^interrupt-controller@[a-z0-9]+$":
+  "^interrupt-controller@[a-f0-9]+$":
     $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
 
 required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml
new file mode 100644
index 000000000000..c4ae4f28422b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ANATOP register
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sl-anatop
+              - fsl,imx6sll-anatop
+              - fsl,imx6sx-anatop
+              - fsl,imx6ul-anatop
+              - fsl,imx7d-anatop
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Temperature sensor event
+      - description: Brown-out event on either of the support regulators
+      - description: Brown-out event on either the core, gpu or soc regulators
+
+  tempmon:
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/thermal/imx-thermal.yaml
+
+patternProperties:
+  "regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/anatop-regulator.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    anatop: anatop@20c8000 {
+        compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+                     "syscon", "simple-mfd";
+        reg = <0x020c8000 0x1000>;
+        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+        reg_3p0: regulator-3p0 {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vdd3p0";
+            regulator-min-microvolt = <2625000>;
+            regulator-max-microvolt = <3400000>;
+            anatop-reg-offset = <0x120>;
+            anatop-vol-bit-shift = <8>;
+            anatop-vol-bit-width = <5>;
+            anatop-min-bit-val = <0>;
+            anatop-min-voltage = <2625000>;
+            anatop-max-voltage = <3400000>;
+            anatop-enable-bit = <0>;
+        };
+
+        reg_arm: regulator-vddcore {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "cpu";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <0>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <24>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        reg_soc: regulator-vddsoc {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vddsoc";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <18>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <28>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        tempmon: tempmon {
+            compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+            interrupt-parent = <&gpc>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,tempmon = <&anatop>;
+            nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+            nvmem-cell-names = "calib", "temp_grade";
+            clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
index 1da1b758b4ae..8451cb4dd87c 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
@@ -17,7 +17,23 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: fsl,imx8mq-iomuxc-gpr
+          - enum:
+              - fsl,imx6q-iomuxc-gpr
+              - fsl,imx8mq-iomuxc-gpr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - fsl,imx6sl-iomuxc-gpr
+              - fsl,imx6sll-iomuxc-gpr
+              - fsl,imx6ul-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx6sx-iomuxc-gpr
+              - fsl,imx7d-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
           - const: syscon
           - const: simple-mfd
       - items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
index 1be4ce2a45e8..bd1cdaa4f54b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -27,8 +27,8 @@ properties:
     const: 1
 
   power-domains:
-    minItems: 8
-    maxItems: 8
+    minItems: 10
+    maxItems: 10
 
   power-domain-names:
     items:
@@ -40,10 +40,12 @@ properties:
       - const: trng
       - const: hdmi-tx
       - const: hdmi-tx-phy
+      - const: hdcp
+      - const: hrv
 
   clocks:
-    minItems: 4
-    maxItems: 4
+    minItems: 5
+    maxItems: 5
 
   clock-names:
     items:
@@ -51,6 +53,7 @@ properties:
       - const: axi
       - const: ref_266m
       - const: ref_24m
+      - const: fdcc
 
   interconnects:
     maxItems: 3
@@ -82,12 +85,15 @@ examples:
         clocks = <&clk IMX8MP_CLK_HDMI_APB>,
                  <&clk IMX8MP_CLK_HDMI_ROOT>,
                  <&clk IMX8MP_CLK_HDMI_REF_266M>,
-                 <&clk IMX8MP_CLK_HDMI_24M>;
-        clock-names = "apb", "axi", "ref_266m", "ref_24m";
+                 <&clk IMX8MP_CLK_HDMI_24M>,
+                 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
         power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
                         <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
-                        <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>;
         power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
-                             "hdmi-tx", "hdmi-tx-phy";
+                             "hdmi-tx", "hdmi-tx-phy",
+                             "hdcp", "hrv";
         #power-domain-cells = <1>;
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pbs.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pbs.yaml
new file mode 100644
index 000000000000..b502ca72266a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pbs.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pbs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Programmable Boot Sequencer
+
+maintainers:
+  - Anjelique Melendez <quic_amelende@quicinc.com>
+
+description: |
+  The Qualcomm Technologies, Inc. Programmable Boot Sequencer (PBS)
+  supports triggering power up and power down sequences for clients
+  upon request.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pmi632-pbs
+      - const: qcom,pbs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+      reg = <0x0 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pbs@7400 {
+        compatible = "qcom,pmi632-pbs", "qcom,pbs";
+        reg = <0x7400>;
+      };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index 61df97ffe1e4..4310bae6c58e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -23,6 +23,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,qcm6490-pmic-glink
               - qcom,sc8180x-pmic-glink
               - qcom,sc8280xp-pmic-glink
               - qcom,sm8350-pmic-glink
@@ -32,6 +33,7 @@ properties:
       - items:
           - enum:
               - qcom,sm8650-pmic-glink
+              - qcom,x1e80100-pmic-glink
           - const: qcom,sm8550-pmic-glink
           - const: qcom,pmic-glink
 
@@ -65,6 +67,7 @@ allOf:
               enum:
                 - qcom,sm8450-pmic-glink
                 - qcom,sm8550-pmic-glink
+                - qcom,x1e80100-pmic-glink
     then:
       properties:
         orientation-gpios: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
index 031800985b5e..9410404f87f1 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -35,6 +35,8 @@ properties:
     description: Phandle to an RPM MSG RAM slice containing the master stats
     minItems: 1
     maxItems: 5
+    items:
+      maxItems: 1
 
   qcom,master-names:
     $ref: /schemas/types.yaml#/definitions/string-array
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
similarity index 53%
rename from Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
rename to Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
index 20c8cd38ff0d..ca4bce817273 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
@@ -1,23 +1,33 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#
+$id: http://devicetree.org/schemas/soc/qcom/qcom,saw2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Subsystem Power Manager
+title: Qualcomm Subsystem Power Manager / SPM AVS Wrapper 2 (SAW2)
 
 maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  This binding describes the Qualcomm Subsystem Power Manager, used to control
-  the peripheral logic surrounding the application cores in Qualcomm platforms.
+  The Qualcomm Subsystem Power Manager is used to control the peripheral logic
+  surrounding the application cores in Qualcomm platforms.
+
+  The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+  Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+  power-controller that transitions a piece of hardware (like a processor or
+  subsystem) into and out of low power modes via a direct connection to
+  the PMIC. It can also be wired up to interact with other processors in the
+  system, notifying them when a low power state is entered or exited.
 
 properties:
   compatible:
     items:
       - enum:
+          - qcom,ipq4019-saw2-cpu
+          - qcom,ipq4019-saw2-l2
+          - qcom,ipq8064-saw2-cpu
           - qcom,sdm660-gold-saw2-v4.1-l2
           - qcom,sdm660-silver-saw2-v4.1-l2
           - qcom,msm8998-gold-saw2-v4.1-l2
@@ -26,16 +36,27 @@ properties:
           - qcom,msm8916-saw2-v3.0-cpu
           - qcom,msm8939-saw2-v3.0-cpu
           - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8226-saw2-v2.1-l2
+          - qcom,msm8960-saw2-cpu
           - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-l2
           - qcom,msm8976-gold-saw2-v2.3-l2
           - qcom,msm8976-silver-saw2-v2.3-l2
           - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8084-saw2-v2.1-l2
           - qcom,apq8064-saw2-v1.1-cpu
       - const: qcom,saw2
 
   reg:
-    description: Base address and size of the SPM register region
-    maxItems: 1
+    items:
+      - description: Base address and size of the SPM register region
+      - description: Base address and size of the alias register region
+    minItems: 1
+
+  regulator:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: Indicates that this SPM device acts as a regulator device
+      device for the core (CPU or Cache) the SPM is attached to.
 
 required:
   - compatible
@@ -82,4 +103,17 @@ examples:
         reg = <0x17912000 0x1000>;
     };
 
+  - |
+    /*
+     * Example 3: SAW2 with the bundled regulator definition.
+     */
+    power-manager@2089000 {
+        compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+        reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+
+        regulator {
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <1300000>;
+        };
+    };
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/renesas/renesas-soc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/renesas/renesas-soc.yaml
new file mode 100644
index 000000000000..5ddd31f30f26
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/renesas/renesas-soc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SoC compatibles naming convention
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    renesas,SoC-IP
+
+  For example::
+   renesas,r8a77965-csi2
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: "^renesas,.+-.+$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    minItems: 1
+    maxItems: 4
+    items:
+      anyOf:
+        # Preferred naming style for compatibles of SoC components
+        - pattern: "^renesas,(emev2|r(7s|8a|9a)[a-z0-9]+|rcar|rmobile|rz[a-z0-9]*|sh(7[a-z0-9]+)?|mobile)-[a-z0-9-]+$"
+        - pattern: "^renesas,(condor|falcon|gr-peach|gray-hawk|salvator|sk-rz|smar(c(2)?)?|spider|white-hawk)(.*)?$"
+
+        # Legacy compatibles
+        #
+        # New compatibles are not allowed.
+        - pattern: "^renesas,(can|cpg|dmac|du|(g)?ether(avb)?|gpio|hscif|(r)?i[i2]c|imr|intc|ipmmu|irqc|jpu|mmcif|msiof|mtu2|pci(e)?|pfc|pwm|[rq]spi|rcar_sound|sata|scif[ab]*|sdhi|thermal|tmu|tpu|usb(2|hs)?|vin|xhci)-[a-z0-9-]+$"
+        - pattern: "^renesas,(d|s)?bsc(3)?-(r8a73a4|r8a7740|sh73a0)$"
+        - pattern: "^renesas,em-(gio|sti|uart)$"
+        - pattern: "^renesas,fsi2-(r8a7740|sh73a0)$"
+        - pattern: "^renesas,hspi-r8a777[89]$"
+        - pattern: "^renesas,sysc-(r8a73a4|r8a7740|rmobile|sh73a0)$"
+        - enum:
+            - renesas,imr-lx4
+            - renesas,mtu2-r7s72100
+
+        # None SoC component compatibles
+        #
+        # Compatibles with the Renesas vendor prefix that do not relate to any SoC
+        # component are OK. New compatibles are allowed.
+        - enum:
+            - renesas,smp-sram
+
+        # Do not fail compatibles not matching the select pattern
+        #
+        # Some SoC components in addition to a Renesas compatible list
+        # compatibles not related to Renesas. The select pattern for this
+        # schema hits all compatibles that have at lest one Renesas compatible
+        # and try to validate all values in that compatible array, allow all
+        # that don't match the schema select pattern. For example,
+        #
+        #   compatible = "renesas,r9a07g044-mali", "arm,mali-bifrost";
+        - pattern: "^(?!renesas,.+-.+).+$"
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 16ca3ff7b1ae..c1ce4da2dc32 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -348,12 +348,25 @@ properties:
               - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
           - const: renesas,r8a779g0
 
+      - description: R-Car V4H (R8A779G2)
+        items:
+          - enum:
+              - renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001)
+          - const: renesas,r8a779g2
+          - const: renesas,r8a779g0
+
       - items:
           - enum:
               - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
           - const: renesas,white-hawk-cpu
           - const: renesas,r8a779g0
 
+      - description: R-Car V4M (R8A779H0)
+        items:
+          - enum:
+              - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S)
+          - const: renesas,r8a779h0
+
       - description: R-Car H3e (R8A779M0)
         items:
           - enum:
@@ -475,12 +488,6 @@ properties:
               - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
           - const: renesas,r9a07g054
 
-      - description: RZ/V2M (R9A09G011)
-        items:
-          - enum:
-              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
-          - const: renesas,r9a09g011
-
       - description: RZ/G3S (R9A08G045)
         items:
           - enum:
@@ -500,6 +507,12 @@ properties:
           - const: renesas,r9a08g045s33 # PCIe support
           - const: renesas,r9a08g045
 
+      - description: RZ/V2M (R9A09G011)
+        items:
+          - enum:
+              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
+          - const: renesas,r9a09g011
+
 additionalProperties: true
 
 ...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 9793ea6f0fe6..79798c747476 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -22,12 +22,15 @@ properties:
               - rockchip,rk3568-usb2phy-grf
               - rockchip,rk3588-bigcore0-grf
               - rockchip,rk3588-bigcore1-grf
+              - rockchip,rk3588-hdptxphy-grf
               - rockchip,rk3588-ioc
               - rockchip,rk3588-php-grf
               - rockchip,rk3588-pipe-phy-grf
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rk3588-usb-grf
+              - rockchip,rk3588-usbdpphy-grf
               - rockchip,rk3588-vo-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
@@ -66,6 +69,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -165,6 +171,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
@@ -248,6 +255,22 @@ allOf:
 
           unevaluatedProperties: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-vo-grf
+
+    then:
+      required:
+        - clocks
+
+    else:
+      properties:
+        clocks: false
+
+
 examples:
   - |
     #include <dt-bindings/clock/rk3399-cru.h>
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
index 1794e3799f21..c0c6ce8fc786 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
@@ -72,6 +72,8 @@ allOf:
         compatible:
           contains:
             enum:
+              - google,gs101-peric0-sysreg
+              - google,gs101-peric1-sysreg
               - samsung,exynos850-cmgp-sysreg
               - samsung,exynos850-peri-sysreg
               - samsung,exynos850-sysreg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
index d4c0fe1fe435..131aba5ed9f4 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
@@ -117,20 +117,70 @@ properties:
           - const: xlnx,zynqmp
 
       - description: Xilinx Kria SOMs
+        minItems: 3
         items:
-          - const: xlnx,zynqmp-sm-k26-rev1
-          - const: xlnx,zynqmp-sm-k26-revB
-          - const: xlnx,zynqmp-sm-k26-revA
-          - const: xlnx,zynqmp-sm-k26
-          - const: xlnx,zynqmp
+          enum:
+            - xlnx,zynqmp-sm-k26-rev2
+            - xlnx,zynqmp-sm-k26-rev1
+            - xlnx,zynqmp-sm-k26-revB
+            - xlnx,zynqmp-sm-k26-revA
+            - xlnx,zynqmp-sm-k26
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp
+          - contains:
+              const: xlnx,zynqmp-sm-k26
 
       - description: Xilinx Kria SOMs (starter)
+        minItems: 3
         items:
-          - const: xlnx,zynqmp-smk-k26-rev1
-          - const: xlnx,zynqmp-smk-k26-revB
-          - const: xlnx,zynqmp-smk-k26-revA
-          - const: xlnx,zynqmp-smk-k26
-          - const: xlnx,zynqmp
+          enum:
+            - xlnx,zynqmp-smk-k26-rev2
+            - xlnx,zynqmp-smk-k26-rev1
+            - xlnx,zynqmp-smk-k26-revB
+            - xlnx,zynqmp-smk-k26-revA
+            - xlnx,zynqmp-smk-k26
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp
+          - contains:
+              const: xlnx,zynqmp-smk-k26
+
+      - description: Xilinx Kria SOM KV260 revA/Y/Z
+        minItems: 3
+        items:
+          enum:
+            - xlnx,zynqmp-sk-kv260-revA
+            - xlnx,zynqmp-sk-kv260-revY
+            - xlnx,zynqmp-sk-kv260-revZ
+            - xlnx,zynqmp-sk-kv260
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp-sk-kv260-revA
+          - contains:
+              const: xlnx,zynqmp-sk-kv260
+          - contains:
+              const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOM KV260 rev2/1/B
+        minItems: 3
+        items:
+          enum:
+            - xlnx,zynqmp-sk-kv260-rev2
+            - xlnx,zynqmp-sk-kv260-rev1
+            - xlnx,zynqmp-sk-kv260-revB
+            - xlnx,zynqmp-sk-kv260
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp-sk-kv260-revB
+          - contains:
+              const: xlnx,zynqmp-sk-kv260
+          - contains:
+              const: xlnx,zynqmp
 
       - description: AMD MicroBlaze V (QEMU)
         items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml
new file mode 100644
index 000000000000..89a67f8e33b6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel wm8904 audio codec complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The ASoC audio complex configuration for Atmel with WM8904 audio codec.
+
+properties:
+  compatible:
+    const: atmel,asoc-wm8904
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+        - Mic
+        # WM8904 CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - MICBIAS
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,audio-routing
+  - atmel,ssc-controller
+  - atmel,audio-codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,asoc-wm8904";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+        atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "HPOUTL",
+                "Headphone Jack", "HPOUTR",
+                "IN2L", "Line In Jack",
+                "IN2R", "Line In Jack",
+                "Mic", "MICBIAS",
+                "IN1L", "Mic";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8904>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml
new file mode 100644
index 000000000000..33717b728f63
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel at91sam9x5ek wm8731 audio complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec.
+
+properties:
+  compatible:
+    const: atmel,sam9x5-wm8731-audio
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+
+        # CODEC Pins
+        - LOUT
+        - ROUT
+        - LHPOUT
+        - RHPOUT
+        - LLINEIN
+        - RLINEIN
+        - MICIN
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,ssc-controller
+  - atmel,audio-codec
+  - atmel,audio-routing
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,sam9x5-wm8731-audio";
+
+        atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "RHPOUT",
+                "Headphone Jack", "LHPOUT",
+                "LLINEIN", "Line In Jack",
+                "RLINEIN", "Line In Jack";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8731>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
index 43d04702ac2d..ae3162fcfe02 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
@@ -18,7 +18,12 @@ description:
 
 properties:
   compatible:
-    const: atmel,sama5d2-classd
+    oneOf:
+      - items:
+          - const: atmel,sama5d2-classd
+      - items:
+          - const: microchip,sam9x7-classd
+          - const: atmel,sama5d2-classd
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
deleted file mode 100644
index 8facbce53db8..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Atmel at91sam9x5ek wm8731 audio complex
-
-Required properties:
-  - compatible: "atmel,sam9x5-wm8731-audio"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8731 audio codec
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source.
-
-Available audio endpoints for the audio-routing table:
-
-Board connectors:
- * Headphone Jack
- * Line In Jack
-
-wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
-
-Example:
-sound {
-	compatible = "atmel,sam9x5-wm8731-audio";
-
-	atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "RHPOUT",
-		"Headphone Jack", "LHPOUT",
-		"LLINEIN", "Line In Jack",
-		"RLINEIN", "Line In Jack";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8731>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel-wm8904.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
deleted file mode 100644
index 8bbe50c884b6..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Atmel ASoC driver with wm8904 audio codec complex
-
-Required properties:
-  - compatible: "atmel,asoc-wm8904"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source. Valid names for sources and
-    sinks are the WM8904's pins, and the jacks on the board:
-
-    WM8904 pins:
-
-    * IN1L
-    * IN1R
-    * IN2L
-    * IN2R
-    * IN3L
-    * IN3R
-    * HPOUTL
-    * HPOUTR
-    * LINEOUTL
-    * LINEOUTR
-    * MICBIAS
-
-    Board connectors:
-
-    * Headphone Jack
-    * Line In Jack
-    * Mic
-
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8904 audio codec
-
-Optional properties:
-  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
-
-Example:
-sound {
-	compatible = "atmel,asoc-wm8904";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-	atmel,model = "wm8904 @ AT91SAM9N12EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "HPOUTL",
-		"Headphone Jack", "HPOUTR",
-		"IN2L", "Line In Jack",
-		"IN2R", "Line In Jack",
-		"Mic", "MICBIAS",
-		"IN1L", "Mic";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8904>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index b13c08de505e..28b27e7e45de 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -51,7 +51,7 @@ definitions:
           - $ref: /schemas/types.yaml#/definitions/phandle
       clocks:
         description: Indicates system clock
-        $ref: /schemas/types.yaml#/definitions/phandle
+        maxItems: 1
       system-clock-frequency:
         $ref: simple-card.yaml#/definitions/system-clock-frequency
       system-clock-direction-out:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 4c9acb8d4c4c..70f6c62aedca 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -25,6 +25,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 1
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
index 7f9d8c7a635a..99a536601cc7 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
@@ -185,11 +185,12 @@ properties:
 
       gpio-ranges:
         items:
-          - description: A phandle to the CODEC pinctrl node
-            minimum: 0
-          - const: 0
-          - const: 0
-          - const: 3
+          - items:
+              - description: A phandle to the CODEC pinctrl node
+                minimum: 0
+              - const: 0
+              - const: 0
+              - const: 3
 
     patternProperties:
       "-state$":
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/cs4341.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/cs4341.txt
index 12b4aa8ef0db..c1d5c8ad1a36 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/cs4341.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/cs4341.txt
@@ -9,7 +9,7 @@ Required properties:
           number for SPI.
 
 For required properties on I2C-bus, please consult
-Documentation/devicetree/bindings/i2c/i2c.txt
+dtschema schemas/i2c/i2c-controller.yaml
 For required properties on SPI-bus, please consult
 Documentation/devicetree/bindings/spi/spi-bus.txt
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml
index 07781408e788..8c82d47375ec 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/everest,es8326.yaml
@@ -38,6 +38,7 @@ properties:
     default: 0x0f
 
   everest,mic1-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset plugged.
@@ -46,6 +47,7 @@ properties:
     default: 0x22
 
   everest,mic2-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset unplugged.
@@ -87,7 +89,7 @@ properties:
        0 means the chip detect jack type again after button released.
     minimum: 0
     maximum: 0x7f
-    default: 0x45
+    default: 0x00
 
 required:
   - compatible
@@ -107,10 +109,8 @@ examples:
         clocks = <&clks 10>;
         clock-names = "mclk";
         #sound-dai-cells = <0>;
-        everest,mic1-src = [22];
-        everest,mic2-src = [44];
         everest,jack-pol = [0e];
         everest,interrupt-src = [08];
-        everest,interrupt-clk = [45];
+        everest,interrupt-clk = [00];
       };
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,asrc.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,asrc.txt
deleted file mode 100644
index 998b4c8a7f78..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Freescale Asynchronous Sample Rate Converter (ASRC) Controller
-
-The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
-signal associated with an input clock into a signal associated with a different
-output clock. The driver currently works as a Front End of DPCM with other Back
-Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
-three substreams within totally 10 channels.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-asrc",
-			  "fsl,imx53-asrc",
-			  "fsl,imx8qm-asrc",
-			  "fsl,imx8qxp-asrc",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Contains the following entries
-	"mem"		  Peripheral access clock to access registers.
-	"ipg"		  Peripheral clock to driver module.
-	"asrck_<0-f>"	  Clock sources for input and output clock.
-	"spba"		  The spba clock is required when ASRC is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
-
-   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
-
-   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
-			  by imx8qm/imx8qxp platform
-			  <0> - select the map for asrc0 in imx8qm/imx8qxp
-			  <1> - select the map for asrc1 in imx8qm/imx8qxp
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the little endian mode
-			  will be in use as default. Otherwise, the big endian
-			  mode will be in use for all the device registers.
-
-   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
-			  Ends, which can replace the fsl,asrc-width.
-			  The value is 2 (S16_LE), or 6 (S24_LE).
-
-Example:
-
-asrc: asrc@2034000 {
-	compatible = "fsl,imx53-asrc";
-	reg = <0x02034000 0x4000>;
-	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 107>, <&clks 0>, <&clks 0>;
-	clock-names = "mem", "ipg", "asrck0",
-		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-		"asrck_d", "asrck_e", "asrck_f";
-	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-	dma-names = "rxa", "rxb", "rxc",
-		"txa", "txb", "txc";
-	fsl,asrc-rate  = <48000>;
-	fsl,asrc-width = <16>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,easrc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
index cf42c85d3534..508f321b9368 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -51,8 +51,8 @@ properties:
       - const: ctx3_tx
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
-    const: /*(DEBLOBBED)*/
+    items:
+      - const: /*(DEBLOBBED)*/
     description: The coefficient table for the filters
 
   fsl,asrc-rate:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
new file mode 100644
index 000000000000..bfef2fcb75b1
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+description:
+  The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
+  a signal associated with an input clock into a signal associated with a
+  different output clock. The driver currently works as a Front End of DPCM
+  with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
+  three pairs to support three substreams within totally 10 channels.
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx35-asrc
+          - fsl,imx53-asrc
+          - fsl,imx8qm-asrc
+          - fsl,imx8qxp-asrc
+      - items:
+          - enum:
+              - fsl,imx6sx-asrc
+              - fsl,imx6ul-asrc
+          - const: fsl,imx53-asrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 6
+
+  dma-names:
+    items:
+      - const: rxa
+      - const: rxb
+      - const: rxc
+      - const: txa
+      - const: txb
+      - const: txc
+
+  clocks:
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: mem
+      - const: ipg
+      - const: asrck_0
+      - const: asrck_1
+      - const: asrck_2
+      - const: asrck_3
+      - const: asrck_4
+      - const: asrck_5
+      - const: asrck_6
+      - const: asrck_7
+      - const: asrck_8
+      - const: asrck_9
+      - const: asrck_a
+      - const: asrck_b
+      - const: asrck_c
+      - const: asrck_d
+      - const: asrck_e
+      - const: asrck_f
+      - const: spba
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample width used by DPCM Back Ends
+    enum: [16, 24]
+
+  fsl,asrc-clk-map:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines clock map used in driver
+      <0> - select the map for asrc0 in imx8qm/imx8qxp
+      <1> - select the map for asrc1 in imx8qm/imx8qxp
+    enum: [0, 1]
+
+  big-endian:
+    type: boolean
+    description:
+      If this property is absent, the little endian mode will be in use as
+      default. Otherwise, the big endian mode will be in use for all the
+      device registers.
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines a mutual sample format used by DPCM Back Ends, which can
+      replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
+    enum: [2, 6]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - fsl,asrc-rate
+  - fsl,asrc-width
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-asrc
+              - fsl,imx8qxp-asrc
+    then:
+      required:
+        - fsl,asrc-clk-map
+    else:
+      properties:
+        fsl,asrc-clk-map: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    asrc: asrc@2034000 {
+        compatible = "fsl,imx53-asrc";
+        reg = <0x02034000 0x4000>;
+        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_SPBA>;
+        clock-names = "mem", "ipg", "asrck_0",
+                "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+                "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+                "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+                "asrck_d", "asrck_e", "asrck_f", "spba";
+        dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+        dma-names = "rxa", "rxb", "rxc",
+                    "txa", "txb", "txc";
+        fsl,asrc-rate  = <48000>;
+        fsl,asrc-width = <16>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,micfil.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
index b7e605835639..c1e9803fc113 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
@@ -15,10 +15,16 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mm-micfil
-      - fsl,imx8mp-micfil
-      - fsl,imx93-micfil
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx95-micfil
+          - const: fsl,imx93-micfil
+
+      - enum:
+          - fsl,imx8mm-micfil
+          - fsl,imx8mp-micfil
+          - fsl,imx93-micfil
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,sai.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,sai.yaml
index 088c26b001cc..2456d958adee 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/fsl,sai.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -39,6 +39,7 @@ properties:
               - fsl,imx8qm-sai
               - fsl,imx8ulp-sai
               - fsl,imx93-sai
+              - fsl,imx95-sai
               - fsl,vf610-sai
 
   reg:
@@ -75,12 +76,17 @@ properties:
           - const: pll11k
         minItems: 4
 
+  power-domains:
+    maxItems: 1
+
   dmas:
+    minItems: 1
     items:
       - description: DMA controller phandle and request line for RX
       - description: DMA controller phandle and request line for TX
 
   dma-names:
+    minItems: 1
     items:
       - const: rx
       - const: tx
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
index 66993d378aaf..5e11ce2c13ac 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
@@ -51,7 +51,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Filters coefficients file to load. If this property is omitted, internal
       filters are disabled.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
index 651f61c7c25a..fb630a184350 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
@@ -24,9 +24,14 @@ properties:
     const: 0
 
   compatible:
-    enum:
-      - microchip,sam9x60-i2smcc
-      - microchip,sama7g5-i2smcc
+    oneOf:
+      - enum:
+          - microchip,sam9x60-i2smcc
+          - microchip,sama7g5-i2smcc
+      - items:
+          - enum:
+              - microchip,sam9x7-i2smcc
+          - const: microchip,sam9x60-i2smcc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml
new file mode 100644
index 000000000000..37161d2aa96e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ASoC DPCM USB backend DAI
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+  The USB port is a supported AFE path on the Q6 DSP.  This ASoC DPCM
+  backend DAI will communicate the required settings to initialize the
+  XHCI host controller properly for enabling the offloaded audio stream.
+  Parameters defined under this node will carry settings, which will be
+  passed along during the QMI stream enable request and configuration of
+  the XHCI host controller.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6usb
+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  qcom,usb-audio-intr-idx:
+    description:
+      Desired XHCI interrupter number to use.  Depending on the audio DSP
+      on the platform, it will operate on a specific XHCI interrupter.
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 8
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - qcom,usb-audio-intr-idx
+
+additionalProperties: false
+
+examples:
+  - |
+    dais {
+      compatible = "qcom,q6usb";
+      #sound-dai-cells = <1>;
+      iommus = <&apps_smmu 0x180f 0x0>;
+      qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index 6f419747273e..2ab6871e89e5 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -107,7 +107,7 @@ patternProperties:
         properties:
           sound-dai:
             minItems: 1
-            maxItems: 4
+            maxItems: 8
 
     required:
       - link-name
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index adbfa67f88ed..cf6c3787adfe 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -15,6 +15,7 @@ description: |
 
 allOf:
   - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
 
 properties:
   compatible:
@@ -22,92 +23,12 @@ properties:
       - qcom,wcd9380-codec
       - qcom,wcd9385-codec
 
-  reset-gpios:
-    description: GPIO spec for reset line to use
-    maxItems: 1
-
   us-euro-gpios:
     description: GPIO spec for swapping gnd and mic segments
     maxItems: 1
 
-  vdd-buck-supply:
-    description: A reference to the 1.8V buck supply
-
-  vdd-rxtx-supply:
-    description: A reference to the 1.8V rx supply
-
-  vdd-io-supply:
-    description: A reference to the 1.8V I/O supply
-
-  vdd-mic-bias-supply:
-    description: A reference to the 3.8V mic bias supply
-
-  qcom,tx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire tx device phandle
-
-  qcom,rx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire rx device phandle
-
-  qcom,micbias1-microvolt:
-    description: micbias1 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias2-microvolt:
-    description: micbias2 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias3-microvolt:
-    description: micbias3 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias4-microvolt:
-    description: micbias4 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,hphl-jack-type-normally-closed:
-    description: Indicates that HPHL jack switch type is normally closed
-    type: boolean
-
-  qcom,ground-jack-type-normally-closed:
-    description: Indicates that Headset Ground switch type is normally closed
-    type: boolean
-
-  qcom,mbhc-headset-vthreshold-microvolt:
-    description: Voltage threshold value for headset detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-headphone-vthreshold-microvolt:
-    description: Voltage threshold value for headphone detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-buttons-vthreshold-microvolt:
-    description:
-      Array of 8 Voltage threshold values corresponding to headset
-      button0 - button7
-    minItems: 8
-    maxItems: 8
-
-  '#sound-dai-cells':
-    const: 1
-
 required:
   - compatible
-  - reset-gpios
-  - qcom,tx-device
-  - qcom,rx-device
-  - qcom,micbias1-microvolt
-  - qcom,micbias2-microvolt
-  - qcom,micbias3-microvolt
-  - qcom,micbias4-microvolt
-  - "#sound-dai-cells"
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml
new file mode 100644
index 000000000000..67ed7701b5d6
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire devices on WCD9390/WCD9395
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices. This bindings is for the devices.
+
+properties:
+  compatible:
+    const: sdw20217010e00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host tx ports.
+      In the order of the device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host rx ports.
+      In the order of device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
new file mode 100644
index 000000000000..6e76f6a8634f
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices.
+  The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
+  subsystems are external to the IC, thus requiring DT port-endpoint graph description
+  to handle USB-C altmode & orientation switching for Audio Accessory Mode.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-codec
+      - items:
+          - const: qcom,wcd9395-codec
+          - const: qcom,wcd9390-codec
+
+  mode-switch:
+    description: Flag the port as possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the WCD939x Codec node to USB MUX subsystems for the
+      purpose of handling altmode muxing and orientation switching to detect and
+      enable Audio Accessory Mode.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    codec {
+        compatible = "qcom,wcd9390-codec";
+        reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+        #sound-dai-cells = <1>;
+        qcom,tx-device = <&wcd939x_tx>;
+        qcom,rx-device = <&wcd939x_rx>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd939x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml
new file mode 100644
index 000000000000..f78ba148ad25
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Qualcomm WCD93xx Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle
+
+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#sound-dai-cells"
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
index d717017b0fdb..22798d22d981 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -28,6 +28,10 @@ properties:
     description: Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  reset-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 0
 
@@ -37,11 +41,16 @@ properties:
 required:
   - compatible
   - reg
-  - powerdown-gpios
   - '#sound-dai-cells'
   - vdd-1p8-supply
   - vdd-io-supply
 
+oneOf:
+  - required:
+      - powerdown-gpios
+  - required:
+      - reset-gpios
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml
new file mode 100644
index 000000000000..880196081a60
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1015 Mono Class D Audio Amplifier
+
+maintainers:
+  - Jack Yu <jack.yu@realtek.com>
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt1015
+
+  reg:
+    maxItems: 1
+
+  realtek,power-up-delay-ms:
+    description: Set a delay time for flush work to be completed,
+      this vlaue is adjustable depending on platform.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@28 {
+            compatible = "realtek,rt1015";
+            reg = <0x28>;
+            realtek,power-up-delay-ms = <50>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/rt1015.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/rt1015.txt
deleted file mode 100644
index e498966d436f..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/rt1015.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-RT1015 Mono Class D Audio Amplifier
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt1015".
-
-- reg : The I2C address of the device.
-
-Optional properties:
-
-- realtek,power-up-delay-ms
-  Set a delay time for flush work to be completed,
-  this value is adjustable depending on platform.
-
-Example:
-
-rt1015: codec@28 {
-	compatible = "realtek,rt1015";
-	reg = <0x28>;
-	realtek,power-up-delay-ms = <50>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/samsung,tm2.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
index 760592599143..cbc7ba37362a 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -25,8 +25,11 @@ properties:
     description: Phandles to the codecs.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - description: Phandle to the WM5110 audio codec.
-      - description: Phandle to the HDMI transmitter node.
+      - items:
+          - description: Phandle to the WM5110 audio codec.
+      - items:
+          - description: Phandle to the HDMI transmitter node.
+
 
   samsung,audio-routing:
     description: |
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
index 58367587bfbc..32e7c14033c2 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
@@ -22,7 +22,6 @@ properties:
           - const: atmel,at91rm9200-spi
       - items:
           - const: microchip,sam9x7-spi
-          - const: microchip,sam9x60-spi
           - const: atmel,at91rm9200-spi
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml
index 79da99ca0e53..f681372da81f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -17,11 +17,13 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - google,gs101-spi
           - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
           - samsung,s3c6410-spi
           - samsung,s5pv210-spi # for S5PV210 and S5PC110
           - samsung,exynos4210-spi
           - samsung,exynos5433-spi
+          - samsung,exynos850-spi
           - samsung,exynosautov9-spi
           - tesla,fsd-spi
       - const: samsung,exynos7-spi
@@ -74,8 +76,6 @@ required:
   - compatible
   - clocks
   - clock-names
-  - dmas
-  - dma-names
   - interrupts
   - reg
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 524f6fe8c27b..093150c0cb87 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -69,6 +69,21 @@ properties:
          Should be generally avoided and be replaced by
          spi-cs-high + ACTIVE_HIGH.
 
+  fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX and TX data FIFOs in bytes.
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX data FIFO in bytes.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the TX data FIFO in bytes.
+
   num-cs:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -116,6 +131,10 @@ patternProperties:
       - compatible
       - reg
 
+dependencies:
+  rx-fifo-depth: [ tx-fifo-depth ]
+  tx-fifo-depth: [ rx-fifo-depth ]
+
 allOf:
   - if:
       not:
@@ -129,6 +148,14 @@ allOf:
       properties:
         "#address-cells":
           const: 0
+  - not:
+      required:
+        - fifo-depth
+        - rx-fifo-depth
+  - not:
+      required:
+        - fifo-depth
+        - tx-fifo-depth
 
 additionalProperties: true
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
index 727c5346b8ce..2ff174244795 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -22,6 +22,7 @@ properties:
           - enum:
               - fsl,imx8ulp-spi
               - fsl,imx93-spi
+              - fsl,imx95-spi
           - const: fsl,imx7ulp-spi
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
index 7fd591145480..4a5f41bde00f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -15,12 +15,18 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - nxp,imx8dxl-fspi
-      - nxp,imx8mm-fspi
-      - nxp,imx8mp-fspi
-      - nxp,imx8qxp-fspi
-      - nxp,lx2160a-fspi
+    oneOf:
+      - enum:
+          - nxp,imx8dxl-fspi
+          - nxp,imx8mm-fspi
+          - nxp,imx8mp-fspi
+          - nxp,imx8qxp-fspi
+          - nxp,lx2160a-fspi
+      - items:
+          - enum:
+              - nxp,imx93-fspi
+              - nxp,imx95-fspi
+          - const: nxp,imx8mm-fspi
 
   reg:
     items:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index a1c96985951f..cf07b8f787a6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -56,7 +56,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^sram@[a-z0-9]+":
+  "^sram@[a-f0-9]+":
     $ref: /schemas/sram/sram.yaml#
     unevaluatedProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/submitting-patches.rst linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/submitting-patches.rst
index 36a17b250ccc..a64f21a5f299 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/submitting-patches.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/submitting-patches.rst
@@ -15,6 +15,11 @@ I. For patch submitters
 
        "dt-bindings: <binding dir>: ..."
 
+     Few subsystems, like ASoC, media, regulators and SPI, expect reverse order
+     of the prefixes::
+
+       "<binding dir>: dt-bindings: ..."
+
      The 80 characters of the subject are precious. It is recommended to not
      use "Documentation" or "doc" because that is implied. All bindings are
      docs. Repeating "binding" again should also be avoided.
@@ -42,28 +47,18 @@ I. For patch submitters
      the code implementing the binding.
 
   6) Any compatible strings used in a chip or board DTS file must be
-     previously documented in the corresponding DT binding text file
+     previously documented in the corresponding DT binding file
      in Documentation/devicetree/bindings.  This rule applies even if
      the Linux device driver does not yet match on the compatible
      string.  [ checkpatch will emit warnings if this step is not
      followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
      ("checkpatch: add DT compatible string documentation checks"). ]
 
-  7) The wildcard "<chip>" may be used in compatible strings, as in
-     the following example:
-
-         - compatible: Must contain '"nvidia,<chip>-pcie",
-           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
-
-     As in the above example, the known values of "<chip>" should be
-     documented if it is used.
-
-  8) If a documented compatible string is not yet matched by the
+  7) If a documented compatible string is not yet matched by the
      driver, the documentation should also include a compatible
-     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
-     example above).
+     string that is matched by the driver.
 
-  9) Bindings are actively used by multiple projects other than the Linux
+  8) Bindings are actively used by multiple projects other than the Linux
      Kernel, extra care and consideration may need to be taken when making changes
      to existing bindings.
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 9b2272a9ec15..6b3aea6d73b0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -21,6 +21,7 @@ properties:
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
+      - allwinner,sun50i-h616-ths
 
   clocks:
     minItems: 1
@@ -50,6 +51,10 @@ properties:
   nvmem-cell-names:
     const: calibration
 
+  allwinner,sram:
+    maxItems: 1
+    description: phandle to device controlling temperate offset SYS_CFG register
+
   # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
@@ -65,6 +70,7 @@ allOf:
               - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
+              - allwinner,sun50i-h616-ths
 
     then:
       properties:
@@ -82,6 +88,17 @@ allOf:
         clock-names:
           minItems: 2
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: allwinner,sun50i-h616-ths
+
+    then:
+      properties:
+        allwinner,sram: false
+
   - if:
       properties:
         compatible:
@@ -101,17 +118,12 @@ allOf:
           const: 1
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - allwinner,sun8i-h3-ths
-              - allwinner,sun8i-r40-ths
-              - allwinner,sun20i-d1-ths
-              - allwinner,sun50i-a64-ths
-              - allwinner,sun50i-a100-ths
-              - allwinner,sun50i-h5-ths
-              - allwinner,sun50i-h6-ths
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - allwinner,sun8i-a83t-ths
 
     then:
       required:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/da9062-thermal.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
deleted file mode 100644
index e241bb5a5584..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Dialog DA9062/61 TJUNC Thermal Module
-
-This module is part of the DA9061/DA9062. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-
-Junction temperature thermal module uses an interrupt signal to identify
-high THERMAL_TRIP_HOT temperatures for the PMIC device.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-        "dlg,da9061-thermal", "dlg,da9062-thermal"
-        "dlg,da9062-thermal"
-
-Optional properties:
-
-- polling-delay-passive : Specify the polling period, measured in
-    milliseconds, between thermal zone device update checks.
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		thermal {
-			compatible = "dlg,da9062-thermal";
-			polling-delay-passive = <3000>;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		thermal {
-			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
-			polling-delay-passive = <3000>;
-		};
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
new file mode 100644
index 000000000000..e8b2cac41084
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9062/61 TJUNC Thermal Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062. For more details about entire
+  DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  Junction temperature thermal module uses an interrupt signal to identify
+  high THERMAL_TRIP_HOT temperatures for the PMIC device.
+
+properties:
+  compatible:
+    oneOf:
+      - const: dlg,da9062-thermal
+      - items:
+          - const: dlg,da9061-thermal
+          - const: dlg,da9062-thermal
+
+  polling-delay-passive:
+    description:
+      Specify the polling period, measured in milliseconds, between
+      thermal zone device update checks.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
index 145744027234..d155d6799da6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -33,7 +33,8 @@ properties:
     description: |
       The values to be programmed into TTRnCR, as specified by the SoC
       reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
-    maxItems: 4
+    minItems: 2
+    maxItems: 7
 
   fsl,tmu-calibration:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index ecf276fd155c..6a81cb6e11bc 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -29,6 +29,7 @@ properties:
       - renesas,r8a779a0-thermal # R-Car V3U
       - renesas,r8a779f0-thermal # R-Car S4-8
       - renesas,r8a779g0-thermal # R-Car V4H
+      - renesas,r8a779h0-thermal # R-Car V4M
 
   reg: true
 
@@ -90,6 +91,7 @@ else:
             enum:
               - renesas,r8a779f0-thermal
               - renesas,r8a779g0-thermal
+              - renesas,r8a779h0-thermal
   then:
     required:
       - interrupts
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index dbd52620d293..68398e7e8655 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -228,8 +228,6 @@ patternProperties:
             additionalProperties: false
 
     required:
-      - polling-delay
-      - polling-delay-passive
       - thermal-sensors
       - trips
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 7a4a6ab85970..ab8f28993139 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -60,7 +60,7 @@ properties:
       be implemented in an always-on power domain."
 
 patternProperties:
-  '^frame@[0-9a-z]*$':
+  '^frame@[0-9a-f]+$':
     type: object
     additionalProperties: false
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/cdns,ttc.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
index dbba780c9b02..da342464d32e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -32,12 +32,23 @@ properties:
     description: |
       Bit width of the timer, necessary if not 16.
 
+  "#pwm-cells":
+    const: 3
+
 required:
   - compatible
   - reg
-  - interrupts
   - clocks
 
+allOf:
+  - if:
+      not:
+        required:
+          - "#pwm-cells"
+    then:
+      required:
+        - interrupts
+
 additionalProperties: false
 
 examples:
@@ -50,3 +61,12 @@ examples:
         clocks = <&cpu_clk 3>;
         timer-width = <32>;
     };
+
+  - |
+    pwm: pwm@f8002000 {
+        compatible = "cdns,ttc";
+        reg = <0xf8002000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+        #pwm-cells = <3>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
deleted file mode 100644
index b3e797e8aa31..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-MediaTek Timers
----------------
-
-MediaTek SoCs have different timers on different platforms,
-- CPUX (ARM/ARM64 System Timer)
-- GPT (General Purpose Timer)
-- SYST (System Timer)
-
-The proper timer will be selected automatically by driver.
-
-Required properties:
-- compatible should contain:
-	For those SoCs that use GPT
-	* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
-	* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
-	* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
-	* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
-	* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
-	* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
-	* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
-	* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
-	* "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
-	* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
-
-	For those SoCs that use SYST
-	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
-	* "mediatek,mt8186-timer" for MT8186 compatible timers (SYST)
-	* "mediatek,mt8188-timer" for MT8188 compatible timers (SYST)
-	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
-	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
-	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
-	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
-
-	For those SoCs that use CPUX
-	* "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
-	* "mediatek,mt8365-systimer" for MT8365 compatible timers (CPUX)
-
-- reg: Should contain location and length for timer register.
-- clocks: Should contain system clock.
-
-Examples:
-
-	timer@10008000 {
-		compatible = "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/mediatek,timer.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/mediatek,timer.yaml
new file mode 100644
index 000000000000..f68fc7050c56
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/mediatek,timer.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mediatek,timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC timers
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  MediaTek SoCs have different timers on different platforms,
+  CPUX (ARM/ARM64 System Timer), GPT (General Purpose Timer)
+  and SYST (System Timer).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt6577-timer
+              - mediatek,mt6765-timer
+              - mediatek,mt6795-systimer
+      # GPT Timers
+      - items:
+          - enum:
+              - mediatek,mt2701-timer
+              - mediatek,mt6580-timer
+              - mediatek,mt6582-timer
+              - mediatek,mt6589-timer
+              - mediatek,mt7623-timer
+              - mediatek,mt8127-timer
+              - mediatek,mt8135-timer
+              - mediatek,mt8173-timer
+              - mediatek,mt8516-timer
+          - const: mediatek,mt6577-timer
+      # SYST Timers
+      - items:
+          - enum:
+              - mediatek,mt7629-timer
+              - mediatek,mt8183-timer
+              - mediatek,mt8186-timer
+              - mediatek,mt8188-timer
+              - mediatek,mt8192-timer
+              - mediatek,mt8195-timer
+              - mediatek,mt8365-systimer
+          - const: mediatek,mt6765-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Timer clock
+      - description: RTC or bus clock
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@10008000 {
+      compatible = "mediatek,mt6577-timer";
+      reg = <0x10008000 0x80>;
+      interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&system_clk>;
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
index 1ee4aab695d3..fe6bc4173789 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
@@ -9,7 +9,7 @@ title: Marvell MMP Timer
 maintainers:
   - Daniel Lezcano <daniel.lezcano@linaro.org>
   - Thomas Gleixner <tglx@linutronix.de>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   $nodename:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
index 2b9653dafab8..891cca009528 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: nxp,sysctr-timer
+    enum:
+      - nxp,imx95-sysctr-timer
+      - nxp,sysctr-timer
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml
new file mode 100644
index 000000000000..59d97feddf4e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,cevt-systick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System tick counter present in Ralink family SoCs
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: ralink,cevt-systick
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    systick@d00 {
+        compatible = "ralink,cevt-systick";
+        reg = <0xd00 0x10>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <7>;
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
index 7207929e5cd6..8b06a681764e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -23,7 +23,7 @@ properties:
       - enum:
           - renesas,r7s72100-ostm  # RZ/A1H
           - renesas,r7s9210-ostm   # RZ/A2M
-          - renesas,r9a07g043-ostm # RZ/G2UL
+          - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ostm # RZ/G2{L,LC}
           - renesas,r9a07g054-ostm # RZ/V2L
       - const: renesas,ostm        # Generic
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/renesas,tmu.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
index a67e427a9e7e..84bbe15028a1 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -46,7 +46,19 @@ properties:
 
   interrupts:
     minItems: 2
-    maxItems: 3
+    items:
+      - description: Underflow interrupt, channel 0
+      - description: Underflow interrupt, channel 1
+      - description: Underflow interrupt, channel 2
+      - description: Input capture interrupt, channel 2
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: tuni0
+      - const: tuni1
+      - const: tuni2
+      - const: ticpi2
 
   clocks:
     maxItems: 1
@@ -100,7 +112,9 @@ examples:
             reg = <0xffd80000 0x30>;
             interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
             clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
             clock-names = "fck";
             power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 829bd2227f7c..774b7992a0ca 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -26,6 +26,7 @@ properties:
       - items:
           - enum:
               - axis,artpec8-mct
+              - google,gs101-mct
               - samsung,exynos3250-mct
               - samsung,exynos5250-mct
               - samsung,exynos5260-mct
@@ -127,6 +128,7 @@ allOf:
           contains:
             enum:
               - axis,artpec8-mct
+              - google,gs101-mct
               - samsung,exynos5260-mct
               - samsung,exynos5420-mct
               - samsung,exynos5433-mct
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml
index c3413b47ac3d..6cb2de7cb568 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/tpm/tcg,tpm_tis-spi.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     items:
       - enum:
+          - atmel,attpm20p
           - infineon,slb9670
           - st,st33htpm-spi
           - st,st33zp24-spi
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/trivial-devices.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
index 79dcd92c4a43..e07be7bf8395 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -28,6 +28,7 @@ properties:
 
   compatible:
     items:
+      # Entries are sorted alphanumerically by the compatible
       - enum:
             # Acbel fsg032 power supply
           - acbel,fsg032
@@ -47,14 +48,16 @@ properties:
           - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
+            # Temperature monitoring of Astera Labs PT5161L PCIe retimer
+          - asteralabs,pt5161l
             # i2c serial eeprom (24cxx)
           - at,24c08
+            # i2c h/w elliptic curve crypto module
+          - atmel,atecc508a
             # ATSHA204 - i2c h/w symmetric crypto module
           - atmel,atsha204
             # ATSHA204A - i2c h/w symmetric crypto module
           - atmel,atsha204a
-            # i2c h/w elliptic curve crypto module
-          - atmel,atecc508a
             # BPA-RS600: Power Supply
           - blutek,bpa-rs600
             # Bosch Sensortec pressure, temperature, humididty and VOC sensor
@@ -115,20 +118,6 @@ properties:
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
-            # Monolithic Power Systems Inc. multi-phase controller mp2856
-          - mps,mp2856
-            # Monolithic Power Systems Inc. multi-phase controller mp2857
-          - mps,mp2857
-            # Monolithic Power Systems Inc. multi-phase controller mp2888
-          - mps,mp2888
-            # Monolithic Power Systems Inc. multi-phase controller mp2971
-          - mps,mp2971
-            # Monolithic Power Systems Inc. multi-phase controller mp2973
-          - mps,mp2973
-            # Monolithic Power Systems Inc. multi-phase controller mp2975
-          - mps,mp2975
-            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
-          - mps,mp5990
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -137,16 +126,10 @@ properties:
           - ibm,cffps1
             # IBM Common Form Factor Power Supply Versions 2
           - ibm,cffps2
+            # Infineon barometric pressure and temperature sensor
+          - infineon,dps310
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
-            # Infineon IR38060 Voltage Regulator
-          - infineon,ir38060
-            # Infineon IR38064 Voltage Regulator
-          - infineon,ir38064
-            # Infineon IR38164 Voltage Regulator
-          - infineon,ir38164
-            # Infineon IR38263 Voltage Regulator
-          - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
@@ -195,6 +178,8 @@ properties:
           - maxim,max1237
             # Temperature Sensor, I2C interface
           - maxim,max1619
+            # 3-Channel Remote Temperature Sensor
+          - maxim,max31730
             # 10-bit 10 kOhm linear programmable voltage divider
           - maxim,max5481
             # 10-bit 50 kOhm linear programmable voltage divider
@@ -207,8 +192,6 @@ properties:
           - maxim,max6621
             # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
           - maxim,max6625
-            # 3-Channel Remote Temperature Sensor
-          - maxim,max31730
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
             # Measurement Specialities I2C temperature and humidity sensor
@@ -239,8 +222,6 @@ properties:
           - memsic,mxc6655
             # Menlo on-board CPLD trivial SPI device
           - menlo,m53cpld
-            # Micron SPI NOR Authenta
-          - micron,spi-authenta
             # Microchip differential I2C ADC, 1 Channel, 18 bit
           - microchip,mcp3421
             # Microchip differential I2C ADC, 2 Channel, 18 bit
@@ -257,40 +238,58 @@ properties:
           - microchip,mcp3427
             # Microchip differential I2C ADC, 4 Channel, 16 bit
           - microchip,mcp3428
-            # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4017-502
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4017-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4017-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4017-104
             # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4018-502
+          - microchip,mcp4017-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4017-503
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4018-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4018-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4018-104
             # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4019-502
+          - microchip,mcp4018-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4018-503
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4019-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4019-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4019-104
+            # Microchip 7-bit Single I2C Digital POT (5k)
+          - microchip,mcp4019-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4019-503
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc654
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc655
+            # Micron SPI NOR Authenta
+          - micron,spi-authenta
             # MiraMEMS DA226 2-axis 14-bit digital accelerometer
           - miramems,da226
             # MiraMEMS DA280 3-axis 14-bit digital accelerometer
           - miramems,da280
             # MiraMEMS DA311 3-axis 12-bit digital accelerometer
           - miramems,da311
+            # Monolithic Power Systems Inc. multi-phase controller mp2856
+          - mps,mp2856
+            # Monolithic Power Systems Inc. multi-phase controller mp2857
+          - mps,mp2857
+            # Monolithic Power Systems Inc. multi-phase controller mp2888
+          - mps,mp2888
+            # Monolithic Power Systems Inc. multi-phase controller mp2971
+          - mps,mp2971
+            # Monolithic Power Systems Inc. multi-phase controller mp2973
+          - mps,mp2973
+            # Monolithic Power Systems Inc. multi-phase controller mp2975
+          - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+          - mps,mp5990
+            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+          - mps,mpq8785
             # Temperature sensor with integrated fan control
           - national,lm63
             # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
@@ -321,12 +320,12 @@ properties:
           - samsung,exynos-sataphy-i2c
             # Semtech sx1301 baseband processor
           - semtech,sx1301
-            # Sensirion low power multi-pixel gas sensor with I2C interface
-          - sensirion,sgpc3
             # Sensirion multi-pixel gas sensor with I2C interface
           - sensirion,sgp30
             # Sensirion gas sensor with I2C interface
           - sensirion,sgp40
+            # Sensirion low power multi-pixel gas sensor with I2C interface
+          - sensirion,sgpc3
             # Sensirion temperature & humidity sensor with I2C interface
           - sensirion,sht4x
             # Sensortek 3 axis accelerometer
@@ -372,8 +371,6 @@ properties:
           - ti,lm74
             # Temperature sensor with integrated fan control
           - ti,lm96000
-            # I2C Touch-Screen Controller
-          - ti,tsc2003
             # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
           - ti,tmp103
             # Thermometer with SPI interface
@@ -395,10 +392,12 @@ properties:
           - ti,tps544b25
           - ti,tps544c20
           - ti,tps544c25
-            # Winbond/Nuvoton H/W Monitor
-          - winbond,w83793
+            # I2C Touch-Screen Controller
+          - ti,tsc2003
             # Vicor Corporation Digital Supervisor
           - vicor,pli1209bc
+            # Winbond/Nuvoton H/W Monitor
+          - winbond,w83793
 
 required:
   - compatible
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 10c146424baa..cd3680dc002f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -27,10 +27,13 @@ properties:
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
           - qcom,sa8775p-ufshc
+          - qcom,sc7180-ufshc
           - qcom,sc7280-ufshc
+          - qcom,sc8180x-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6115-ufshc
+          - qcom,sm6125-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -42,11 +45,11 @@ properties:
       - const: jedec,ufs-2.0
 
   clocks:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   clock-names:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   dma-coherent: true
@@ -112,6 +115,31 @@ required:
 allOf:
   - $ref: ufs-common.yaml
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
   - if:
       properties:
         compatible:
@@ -120,6 +148,7 @@ allOf:
               - qcom,msm8998-ufshc
               - qcom,sa8775p-ufshc
               - qcom,sc7280-ufshc
+              - qcom,sc8180x-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc
@@ -215,6 +244,7 @@ allOf:
           contains:
             enum:
               - qcom,sm6115-ufshc
+              - qcom,sm6125-ufshc
     then:
       properties:
         clocks:
@@ -248,7 +278,7 @@ allOf:
         reg:
           maxItems: 1
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 8
     else:
       properties:
@@ -256,7 +286,7 @@ allOf:
           minItems: 1
           maxItems: 2
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 11
 
 unevaluatedProperties: false
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
index e4d893369d57..3f5857aee3b0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -23,24 +23,11 @@ properties:
   connector:
     type: object
     $ref: ../connector/usb-connector.yaml
-    unevaluatedProperties: false
-
-    description:
-      Properties for usb c connector.
 
     properties:
       compatible:
         const: usb-c-connector
 
-      power-role: true
-
-      data-role: true
-
-      try-power-role: true
-
-    required:
-      - compatible
-
 required:
   - compatible
   - reg
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
index b7e664f7395b..3b56e0edb1c6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
@@ -313,7 +313,7 @@ properties:
 
   usb-phy:
     description: phandle for the PHY device. Use "phys" instead.
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     deprecated: true
 
   fsl,usbphy:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
index 47add0d85fb8..28096619a882 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/usb/cypress,hx3.yaml#
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
index f9410eb76a62..8b25b9a01ced 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
@@ -27,13 +27,8 @@ properties:
   vcc-supply:
     description: power supply (2.7V-5.5V)
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -79,6 +74,9 @@ required:
   - reg
   - port
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 87986c45be88..2ed178f16a78 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -77,6 +77,7 @@ properties:
           - const: usb-ehci
       - enum:
           - generic-ehci
+          - marvell,ac5-ehci
           - marvell,armada-3700-ehci
           - marvell,orion-ehci
           - nuvoton,npcm750-ehci
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index d3b2b666ec2a..88e1607cf053 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -33,13 +33,8 @@ properties:
   vcc-supply:
     description: power supply
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -54,6 +49,9 @@ required:
   - orientation-switch
   - port
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
new file mode 100644
index 000000000000..f3011694393d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Hi3798MV200 DWC3 USB SoC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@foxmail.com>
+
+properties:
+  compatible:
+    const: hisilicon,hi3798mv200-dwc3
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Controller bus clock
+      - description: Controller suspend clock
+      - description: Controller reference clock
+      - description: Controller gm clock
+      - description: Controller gs clock
+      - description: Controller utmi clock
+      - description: Controller pipe clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: suspend
+      - const: ref
+      - const: gm
+      - const: gs
+      - const: utmi
+      - const: pipe
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: soft
+
+patternProperties:
+  '^usb@[0-9a-f]+$':
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "hisilicon,hi3798mv200-dwc3";
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        clocks = <&clk_bus>,
+                 <&clk_suspend>,
+                 <&clk_ref>,
+                 <&clk_gm>,
+                 <&clk_gs>,
+                 <&clk_utmi>,
+                 <&clk_pipe>;
+        clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe";
+        resets = <&crg 0xb0 12>;
+        reset-names = "soft";
+
+        usb@98a0000 {
+            compatible = "snps,dwc3";
+            reg = <0x98a0000 0x10000>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk_bus>,
+                     <&clk_suspend>,
+                     <&clk_ref>;
+            clock-names = "bus_early", "suspend", "ref";
+            phys = <&usb2_phy1_port2>, <&combphy0 0>;
+            phy-names = "usb2-phy", "usb3-phy";
+            maximum-speed = "super-speed";
+            dr_mode = "host";
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ite,it5205.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ite,it5205.yaml
new file mode 100644
index 000000000000..36ec4251b5f2
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ite,it5205.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ite,it5205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT5202 Type-C USB Alternate Mode Passive MUX
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Tianping Fang <tianping.fang@mediatek.com>
+
+properties:
+  compatible:
+    const: ite,it5205
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Power supply for VCC pin (3.3V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ite,ovp-enable:
+    description: Enable Over Voltage Protection functionality
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the IT5205 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - orientation-switch
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@48 {
+          compatible = "ite,it5205";
+          reg = <0x48>;
+
+          mode-switch;
+          orientation-switch;
+
+          vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+          port {
+            it5205_usbss_sbu: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index a59d91243ac8..d4e187c78a0b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -185,7 +185,10 @@ properties:
             2 - used by mt2712 etc, revision 2 with following IPM rule;
             101 - used by mt8183, specific 1.01;
             102 - used by mt8192, specific 1.02;
-          enum: [1, 2, 101, 102]
+            103 - used by mt8195, IP0, specific 1.03;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 105, 106]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
index 445183d9d6db..e2a72deae776 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -72,8 +72,6 @@ allOf:
         i2c-bus: false
     else:
       $ref: /schemas/usb/usb-device.yaml
-      required:
-        - peer-hub
 
 additionalProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml
index eee548ac1abe..d805dde80796 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml
@@ -20,13 +20,8 @@ properties:
   vdd18-supply:
     description: Power supply for VDD18 pin
 
-  retimer-switch:
-    description: Flag the port as possible handle of SuperSpeed signals retiming
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  orientation-switch: true
+  retimer-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -49,6 +44,9 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
index eaedb4cc6b6c..65a8632b4d9e 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: nxp,ptn5110
+    items:
+      - const: nxp,ptn5110
+      - const: tcpci
 
   reg:
     maxItems: 1
@@ -41,7 +43,7 @@ examples:
         #size-cells = <0>;
 
         tcpci@50 {
-            compatible = "nxp,ptn5110";
+            compatible = "nxp,ptn5110", "tcpci";
             reg = <0x50>;
             interrupt-parent = <&gpio3>;
             interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
index c0201da002f6..589914d22bf2 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
@@ -21,14 +21,8 @@ properties:
     description: power supply (1.8V)
 
   enable-gpios: true
-
-  retimer-switch:
-    description: Flag the port as possible handle of SuperSpeed signals retiming
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  orientation-switch: true
+  retimer-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -95,6 +89,9 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 63d150b216c5..38a3404ec71b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -102,7 +102,7 @@ properties:
     description: |
       Different types of interrupts are used based on HS PHY used on target:
         - pwr_event: Used for wakeup based on other power events.
-        - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+        - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
                        hs_phy_irq which is not triggered by default and its
                        functionality is mutually exclusive to that of
                        {dp/dm}_hs_phy_irq and qusb2_phy_irq.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
index 55df3129a0bc..d9694570c419 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -14,8 +14,19 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-typec
+    oneOf:
+      - enum:
+          - qcom,pmi632-typec
+          - qcom,pm8150b-typec
+      - items:
+          - enum:
+              - qcom,pm6150-typec
+          - const: qcom,pm8150b-typec
+      - items:
+          - enum:
+              - qcom,pm4125-typec
+          - const: qcom,pmi632-typec
+
 
   connector:
     type: object
@@ -24,9 +35,11 @@ properties:
 
   reg:
     description: Type-C port and pdphy SPMI register base offsets
+    minItems: 1
     maxItems: 2
 
   interrupts:
+    minItems: 8
     items:
       - description: Type-C CC attach notification, VBUS error, tCCDebounce done
       - description: Type-C VCONN powered
@@ -46,6 +59,7 @@ properties:
       - description: Power Domain Fast Role Swap event
 
   interrupt-names:
+    minItems: 8
     items:
       - const: or-rid-detect-change
       - const: vpd-detect
@@ -81,7 +95,33 @@ required:
   - interrupts
   - interrupt-names
   - vdd-vbus-supply
-  - vdd-pdphy-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi632-typec
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        interrupts:
+          maxItems: 8
+        interrupt-names:
+          maxItems: 8
+        vdd-pdphy-supply: false
+    else:
+      properties:
+        reg:
+          maxItems: 2
+        interrupts:
+          minItems: 16
+        interrupt-names:
+          maxItems: 16
+      required:
+        - vdd-pdphy-supply
 
 additionalProperties: false
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
index 7ddfd3313a18..96346723f3e9 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
@@ -35,13 +35,8 @@ properties:
   vdd-supply:
     description: USBSS VDD power supply
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -63,6 +58,9 @@ required:
   - reg
   - ports
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
index f0784d2e86da..0874fc21f66f 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
@@ -21,6 +21,12 @@ properties:
 
   reg: true
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
@@ -30,6 +36,36 @@ properties:
     description:
       phandle to the peer hub on the controller.
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          1st downstream facing USB port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          2nd downstream facing USB port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          3rd downstream facing USB port
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          4th downstream facing USB port
+
+patternProperties:
+  '^.*@[1-4]$':
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+
 required:
   - peer-hub
   - compatible
@@ -50,6 +86,13 @@ examples:
             reg = <1>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_3_0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* USB 2.0 device on port 2 */
+            device@2 {
+                compatible = "usb123,4567";
+                reg = <2>;
+            };
         };
 
         /* 3.0 hub on port 2 */
@@ -58,5 +101,17 @@ examples:
             reg = <2>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_2_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* Type-A connector on port 4 */
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                      remote-endpoint = <&usb_a0_ss>;
+                    };
+                };
+            };
         };
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
index fec5651f5602..f6e6d084d1c5 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -14,7 +14,10 @@ properties:
     const: ti,am62-usb
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: USB CFG register space
+      - description: USB PHY2 register space
 
   ranges: true
 
@@ -82,7 +85,8 @@ examples:
 
       usbss1: usb@f910000 {
         compatible = "ti,am62-usb";
-        reg = <0x00 0x0f910000 0x00 0x800>;
+        reg = <0x00 0x0f910000 0x00 0x800>,
+              <0x00 0x0f918000 0x00 0x400>;
         clocks = <&k3_clks 162 3>;
         clock-names = "ref";
         ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
new file mode 100644
index 000000000000..8ef117793e11
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI USB8020B USB 3.0 hub controller
+
+maintainers:
+  - Macpaul Lin <macpaul.lin@mediatek.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8025
+      - usb451,8027
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8027";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8025";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
index 6734f4d3aa78..9b3ea23654af 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
@@ -37,10 +37,11 @@ properties:
     description: Should specify the GPIO detecting a VBus insertion
     maxItems: 1
 
-  vbus-regulator:
-    description: Should specify the regulator supplying current drawn from
-      the VBus line.
-    $ref: /schemas/types.yaml#/definitions/phandle
+  vbus-supply:
+    description: regulator supplying VBUS. It will be enabled and disabled
+                 dynamically in OTG mode. If the regulator is controlled by a
+                 GPIO line, this should be modeled as a regulator-fixed and
+                 referenced by this supply.
 
   wakeup-source:
     description:
@@ -65,7 +66,7 @@ examples:
         vcc-supply = <&hsusb1_vcc_regulator>;
         reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
         vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-        vbus-regulator = <&vbus_regulator>;
+        vbus-supply = <&vbus_regulator>;
         #phy-cells = <0>;
     };
 
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml
new file mode 100644
index 000000000000..da76118e73a5
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Orientation and Mode Switches Common Properties
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+  Common properties for devices handling USB mode and orientation switching.
+
+properties:
+  mode-switch:
+    description: Possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Possible handler of orientation switching
+    type: boolean
+
+  retimer-switch:
+    description: Possible handler of SuperSpeed signals retiming
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the device to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Super Speed (SS) Input endpoint from the Super-Speed PHY
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                $ref: /schemas/types.yaml#/definitions/uint32-array
+                minItems: 1
+                maxItems: 8
+                uniqueItems: true
+                items:
+                  maximum: 8
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: true
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/usb.yaml
index 326b14f05d1c..1761b7aa92f0 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/usb/usb.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/usb/usb.yaml
@@ -25,6 +25,8 @@ properties:
 
   usb-phy:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       List of all the USB PHYs on this HCD to be accepted by the legacy USB
       Physical Layer subsystem.
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1a0dc04f1db4..b97d298b3eb6 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -39,6 +39,8 @@ patternProperties:
     description: ShenZhen Asia Better Technology Ltd.
   "^acbel,.*":
     description: Acbel Polytech Inc.
+  "^acelink,.*":
+    description: Acelink Technology Co., Ltd.
   "^acer,.*":
     description: Acer Inc.
   "^acme,.*":
@@ -61,6 +63,8 @@ patternProperties:
     description: Analog Devices, Inc.
   "^adieng,.*":
     description: ADI Engineering, Inc.
+  "^admatec,.*":
+    description: admatec GmbH
   "^advantech,.*":
     description: Advantech Corporation
   "^aeroflexgaisler,.*":
@@ -107,6 +111,8 @@ patternProperties:
     description: Amlogic, Inc.
   "^ampere,.*":
     description: Ampere Computing LLC
+  "^amphenol,.*":
+    description: Amphenol Advanced Sensors
   "^ampire,.*":
     description: Ampire Co., Ltd.
   "^ams,.*":
@@ -159,6 +165,8 @@ patternProperties:
     description: ASPEED Technology Inc.
   "^asrock,.*":
     description: ASRock Inc.
+  "^asteralabs,.*":
+    description: Astera Labs, Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
   "^atheros,.*":
@@ -230,6 +238,8 @@ patternProperties:
     description: ByteDance Ltd.
   "^calamp,.*":
     description: CalAmp Corp.
+  "^calao,.*":
+    description: CALAO Systems SAS
   "^calaosystems,.*":
     description: CALAO Systems SAS
   "^calxeda,.*":
@@ -478,6 +488,9 @@ patternProperties:
     description: EZchip Semiconductor
   "^facebook,.*":
     description: Facebook
+  "^fairchild,.*":
+    description: Fairchild Semiconductor (deprecated, use 'onnn')
+    deprecated: true
   "^fairphone,.*":
     description: Fairphone B.V.
   "^faraday,.*":
@@ -500,6 +513,8 @@ patternProperties:
     description: FocalTech Systems Co.,Ltd
   "^forlinx,.*":
     description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^freebox,.*":
+    description: Freebox SAS
   "^freecom,.*":
     description: Freecom Gmbh
   "^frida,.*":
@@ -542,6 +557,8 @@ patternProperties:
     description: Giantec Semiconductor, Inc.
   "^giantplus,.*":
     description: Giantplus Technology Co., Ltd.
+  "^glinet,.*":
+    description: GL Intelligence, Inc.
   "^globalscale,.*":
     description: Globalscale Technologies, Inc.
   "^globaltop,.*":
@@ -601,6 +618,8 @@ patternProperties:
     description: Honestar Technologies Co., Ltd.
   "^honeywell,.*":
     description: Honeywell
+  "^hoperf,.*":
+    description: Shenzhen Hope Microelectronics Co., Ltd.
   "^hoperun,.*":
     description: Jiangsu HopeRun Software Co., Ltd.
   "^hp,.*":
@@ -631,12 +650,16 @@ patternProperties:
     description: Hyundai Technology
   "^i2se,.*":
     description: I2SE GmbH
+  "^IBM,.*":
+    description: International Business Machines (IBM)
   "^ibm,.*":
     description: International Business Machines (IBM)
   "^icplus,.*":
     description: IC Plus Corp.
   "^idt,.*":
     description: Integrated Device Technologies, Inc.
+  "^iei,.*":
+    description: IEI Integration Corp.
   "^ifi,.*":
     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
   "^ilitek,.*":
@@ -719,6 +742,8 @@ patternProperties:
     description: JetHome (IP Sokolov P.A.)
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^jide,.*":
+    description: Jide Tech
   "^joz,.*":
     description: JOZ BV
   "^kam,.*":
@@ -821,6 +846,8 @@ patternProperties:
     description: LSI Corp. (LSI Logic)
   "^lunzn,.*":
     description: Shenzhen Lunzn Technology Co., Ltd.
+  "^luxul,.*":
+    description: Lagrand | AV
   "^lwn,.*":
     description: Liebherr-Werk Nenzing GmbH
   "^lxa,.*":
@@ -899,6 +926,9 @@ patternProperties:
     description: Miniand Tech
   "^minix,.*":
     description: MINIX Technology Ltd.
+  "^mips,.*":
+    description: MIPS Technology (deprecated, use 'mti' or 'img')
+    deprecated: true
   "^miramems,.*":
     description: MiraMEMS Sensing Technology Co., Ltd.
   "^mitsubishi,.*":
@@ -911,6 +941,8 @@ patternProperties:
     description: Miyoo
   "^mntre,.*":
     description: MNT Research GmbH
+  "^mobileye,.*":
+    description: Mobileye Vision Technologies Ltd.
   "^modtronix,.*":
     description: Modtronix Engineering
   "^moortec,.*":
@@ -993,6 +1025,9 @@ patternProperties:
     description: Novatek
   "^novtech,.*":
     description: NovTech, Inc.
+  "^numonyx,.*":
+    description: Numonyx (deprecated, use micron)
+    deprecated: true
   "^nutsboard,.*":
     description: NutsBoard
   "^nuvoton,.*":
@@ -1297,6 +1332,8 @@ patternProperties:
     description: Skyworks Solutions, Inc.
   "^smartlabs,.*":
     description: SmartLabs LLC
+  "^smartrg,.*":
+    description: SmartRG, Inc.
   "^smi,.*":
     description: Silicon Motion Technology Corporation
   "^smsc,.*":
@@ -1484,6 +1521,8 @@ patternProperties:
     description: Ufi Space Co., Ltd.
   "^ugoos,.*":
     description: Ugoos Industrial Co., Ltd.
+  "^uni-t,.*":
+    description: Uni-Trend Technology (China) Co., Ltd.
   "^uniwest,.*":
     description: United Western Technologies Corp (UniWest)
   "^upisemi,.*":
@@ -1534,10 +1573,16 @@ patternProperties:
     description: VoCore Studio
   "^voipac,.*":
     description: Voipac Technologies s.r.o.
+  "^voltafield,.*":
+    description: Voltafield Technology Corp.
   "^vot,.*":
     description: Vision Optical Technology Co., Ltd.
+  "^vscom,.*":
+    description: VS Visions Systems GmbH
   "^vxt,.*":
     description: VXT Ltd
+  "^wacom,.*":
+    description: Wacom
   "^wanchanglong,.*":
     description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^wand,.*":
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/w1/w1-uart.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/w1/w1-uart.yaml
new file mode 100644
index 000000000000..bd7c62d780b8
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/w1/w1-uart.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART 1-Wire Bus
+
+maintainers:
+  - Christoph Winklhofer <cj.winklhofer@gmail.com>
+
+description: |
+  UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus
+  to create the 1-Wire timing patterns.
+
+  The UART peripheral must support full-duplex and operate in open-drain
+  mode. The timing patterns are generated by a specific combination of
+  baud-rate and transmitted byte, which corresponds to a 1-Wire read bit,
+  write bit or reset pulse.
+
+  The default baud-rate for reset and presence detection is 9600 and for
+  a 1-Wire read or write operation 115200. In case the actual baud-rate
+  is different from the requested one, the transmitted byte is adapted
+  to generate the 1-Wire timing patterns.
+
+  https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html
+
+properties:
+  compatible:
+    const: w1-uart
+
+  reset-bps:
+    default: 9600
+    description:
+      The baud rate for the 1-Wire reset and presence detect.
+
+  write-0-bps:
+    default: 115200
+    description:
+      The baud rate for the 1-Wire write-0 cycle.
+
+  write-1-bps:
+    default: 115200
+    description:
+      The baud rate for the 1-Wire write-1 and read cycle.
+
+required:
+  - compatible
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    serial {
+        onewire {
+            compatible = "w1-uart";
+        };
+    };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
index 7aea255b301b..bd7c09ed1938 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
@@ -50,6 +50,10 @@ properties:
       - const: wdog_clk
       - const: apb_pclk
 
+  resets:
+    maxItems: 1
+    description: WDOGRESn input reset signal for sp805 module.
+
 required:
   - compatible
   - reg
@@ -67,4 +71,5 @@ examples:
         interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&wdt_clk>, <&apb_pclk>;
         clock-names = "wdog_clk", "apb_pclk";
+        resets = <&wdt_rst>;
     };
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
index 816f85ee2c77..cdf87db36183 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -14,10 +14,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - atmel,sama5d4-wdt
-      - microchip,sam9x60-wdt
-      - microchip,sama7g5-wdt
+    oneOf:
+      - enum:
+          - atmel,sama5d4-wdt
+          - microchip,sam9x60-wdt
+          - microchip,sama7g5-wdt
+      - items:
+          - const: microchip,sam9x7-wdt
+          - const: microchip,sam9x60-wdt
 
   reg:
     maxItems: 1
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt
deleted file mode 100644
index f801d71de1cd..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-BCM2835 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-pm-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- timeout-sec   : Contains the watchdog timeout in seconds
-
-Example:
-
-watchdog {
-	compatible = "brcm,bcm2835-pm-wdt";
-	reg = <0x7e100000 0x28>;
-	timeout-sec = <10>;
-};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index a4f35c598cdb..47587971fb0b 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer
 
 maintainers:
-  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
 
 properties:
   $nodename:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
index 951a7d54135a..ffb17add491a 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -71,6 +71,7 @@ properties:
               - renesas,r8a779a0-wdt     # R-Car V3U
               - renesas,r8a779f0-wdt     # R-Car S4-8
               - renesas,r8a779g0-wdt     # R-Car V4H
+              - renesas,r8a779h0-wdt     # R-Car V4M
           - const: renesas,rcar-gen4-wdt # R-Car Gen4
 
   reg:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/sprd,sp9860-wdt.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/sprd,sp9860-wdt.yaml
new file mode 100644
index 000000000000..730d9a3a3cc5
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/sprd,sp9860-wdt.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/sprd,sp9860-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SP9860 watchdog timer
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: sprd,sp9860-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: enable
+      - const: rtc_enable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - timeout-sec
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        watchdog@40310000 {
+            compatible = "sprd,sp9860-wdt";
+            reg = <0 0x40310000 0 0x1000>;
+            interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&aon_gate CLK_APCPU_WDG_EB>, <&aon_gate CLK_AP_WDG_RTC_EB>;
+            clock-names = "enable", "rtc_enable";
+            timeout-sec = <12>;
+        };
+    };
+...
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
deleted file mode 100644
index aeaf3e0caf47..000000000000
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Spreadtrum SoCs Watchdog timer
-
-Required properties:
-- compatible : Should be "sprd,sp9860-wdt".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : Exactly one interrupt specifier.
-- timeout-sec : Contain the default watchdog timeout in seconds.
-- clock-names : Contain the input clock names.
-- clocks : Phandles to input clocks.
-
-Example:
-	watchdog: watchdog@40310000 {
-		compatible = "sprd,sp9860-wdt";
-		reg = <0 0x40310000 0 0x1000>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		timeout-sec = <12>;
-		clock-names = "enable", "rtc_enable";
-		clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
-	};
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
index 68f3f6fd08a6..e21f807b0b69 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
@@ -19,14 +19,16 @@ description:
   isn't cleared, the watchdog will reset the system unless the watchdog
   reset is disabled.
 
-allOf:
-  - $ref: watchdog.yaml#
-
 properties:
   compatible:
-    enum:
-      - starfive,jh7100-wdt
-      - starfive,jh7110-wdt
+    oneOf:
+      - enum:
+          - starfive,jh7100-wdt
+          - starfive,jh7110-wdt
+      - items:
+          - enum:
+              - starfive,jh8100-wdt
+          - const: starfive,jh7110-wdt
 
   reg:
     maxItems: 1
@@ -45,9 +47,8 @@ properties:
       - const: core
 
   resets:
-    items:
-      - description: APB reset
-      - description: Core reset
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -56,6 +57,27 @@ required:
   - clock-names
   - resets
 
+allOf:
+  - $ref: watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - starfive,jh8100-wdt
+    then:
+      properties:
+        resets:
+          items:
+            - description: Core reset
+    else:
+      properties:
+        resets:
+          items:
+            - description: APB reset
+            - description: Core reset
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.8-gnu/Documentation/devicetree/bindings/writing-schema.rst linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/writing-schema.rst
index 0a6cf19a1459..7e71cdd1d6de 100644
--- linux-libre-6.8-gnu/Documentation/devicetree/bindings/writing-schema.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/devicetree/bindings/writing-schema.rst
@@ -31,7 +31,7 @@ $schema
   Indicates the meta-schema the schema file adheres to.
 
 title
-  A one-line description on the contents of the binding schema.
+  A one-line description of the hardware being described in the binding schema.
 
 maintainers
   A DT specific property. Contains a list of email address(es)
@@ -39,7 +39,7 @@ maintainers
 
 description
   Optional. A multi-line text block containing any detailed
-  information about this binding. It should contain things such as what the block
+  information about this hardware. It should contain things such as what the block
   or device does, standards the device conforms to, and links to datasheets for
   more information.
 
@@ -71,9 +71,31 @@ required
   A list of DT properties from the 'properties' section that
   must always be present.
 
+additionalProperties / unevaluatedProperties
+  Keywords controlling how schema will validate properties not matched by this
+  schema's 'properties' or 'patternProperties'. Each schema is supposed to
+  have exactly one of these keywords in top-level part, so either
+  additionalProperties or unevaluatedProperties. Nested nodes, so properties
+  being objects, are supposed to have one as well.
+
+  * additionalProperties: false
+      Most common case, where no additional schema is referenced or if this
+      binding allows subset of properties from other referenced schemas.
+
+  * unevaluatedProperties: false
+      Used when this binding references other schema whose all properties
+      should be allowed.
+
+  * additionalProperties: true
+      Rare case, used for schemas implementing common set of properties. Such
+      schemas are supposed to be referenced by other schemas, which then use
+      'unevaluatedProperties: false'.  Typically bus or common-part schemas.
+
 examples
-  Optional. A list of one or more DTS hunks implementing the
-  binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead.
+  Optional. A list of one or more DTS hunks implementing this binding only.
+  Example should not contain unrelated device nodes, e.g. consumer nodes in a
+  provider binding, other nodes referenced by phandle.
+  Note: YAML doesn't allow leading tabs, so spaces must be used instead.
 
 Unless noted otherwise, all properties are required.
 
diff --git linux-libre-6.8-gnu/Documentation/doc-guide/kernel-doc.rst linux-libre-6.9-rc6-gnu/Documentation/doc-guide/kernel-doc.rst
index 6ad72ac6861b..d6f7efefea42 100644
--- linux-libre-6.8-gnu/Documentation/doc-guide/kernel-doc.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/doc-guide/kernel-doc.rst
@@ -341,6 +341,51 @@ Typedefs with function prototypes can also be documented::
    */
    typedef void (*type_name)(struct v4l2_ctrl *arg1, void *arg2);
 
+Object-like macro documentation
+-------------------------------
+
+Object-like macros are distinct from function-like macros. They are
+differentiated by whether the macro name is immediately followed by a
+left parenthesis ('(') for function-like macros or not followed by one
+for object-like macros.
+
+Function-like macros are handled like functions by ``scripts/kernel-doc``.
+They may have a parameter list. Object-like macros have do not have a
+parameter list.
+
+The general format of an object-like macro kernel-doc comment is::
+
+  /**
+   * define object_name - Brief description.
+   *
+   * Description of the object.
+   */
+
+Example::
+
+  /**
+   * define MAX_ERRNO - maximum errno value that is supported
+   *
+   * Kernel pointers have redundant information, so we can use a
+   * scheme where we can return either an error code or a normal
+   * pointer with the same return value.
+   */
+  #define MAX_ERRNO	4095
+
+Example::
+
+  /**
+   * define DRM_GEM_VRAM_PLANE_HELPER_FUNCS - \
+   *	Initializes struct drm_plane_helper_funcs for VRAM handling
+   *
+   * This macro initializes struct drm_plane_helper_funcs to use the
+   * respective helper functions.
+   */
+  #define DRM_GEM_VRAM_PLANE_HELPER_FUNCS \
+	.prepare_fb = drm_gem_vram_plane_helper_prepare_fb, \
+	.cleanup_fb = drm_gem_vram_plane_helper_cleanup_fb
+
+
 Highlights and cross-references
 -------------------------------
 
diff --git linux-libre-6.8-gnu/Documentation/doc-guide/maintainer-profile.rst linux-libre-6.9-rc6-gnu/Documentation/doc-guide/maintainer-profile.rst
index 755d39f0d407..db3636d0d71d 100644
--- linux-libre-6.8-gnu/Documentation/doc-guide/maintainer-profile.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/doc-guide/maintainer-profile.rst
@@ -27,6 +27,13 @@ documentation and ensure that no new errors or warnings have been
 introduced.  Generating HTML documents and looking at the result will help
 to avoid unsightly misunderstandings about how things will be rendered.
 
+All new documentation (including additions to existing documents) should
+ideally justify who the intended target audience is somewhere in the
+changelog; this way, we ensure that the documentation ends up in the correct
+place.  Some possible categories are: kernel developers (experts or
+beginners), userspace programmers, end users and/or system administrators,
+and distributors.
+
 Key cycle dates
 ---------------
 
diff --git linux-libre-6.8-gnu/Documentation/doc-guide/sphinx.rst linux-libre-6.9-rc6-gnu/Documentation/doc-guide/sphinx.rst
index 3d125fb4139d..8081ebfe48bc 100644
--- linux-libre-6.8-gnu/Documentation/doc-guide/sphinx.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/doc-guide/sphinx.rst
@@ -48,13 +48,14 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.
       on the Sphinx version, it should be installed separately,
       with ``pip install sphinx_rtd_theme``.
 
-In summary, if you want to install Sphinx version 2.4.4, you should do::
+In summary, if you want to install the latest version of Sphinx, you
+should do::
 
-       $ virtualenv sphinx_2.4.4
-       $ . sphinx_2.4.4/bin/activate
-       (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
+       $ virtualenv sphinx_latest
+       $ . sphinx_latest/bin/activate
+       (sphinx_latest) $ pip install -r Documentation/sphinx/requirements.txt
 
-After running ``. sphinx_2.4.4/bin/activate``, the prompt will change,
+After running ``. sphinx_latest/bin/activate``, the prompt will change,
 in order to indicate that you're using the new environment. If you
 open a new shell, you need to rerun this command to enter again at
 the virtual environment before building the documentation.
@@ -63,8 +64,7 @@ Image output
 ------------
 
 The kernel documentation build system contains an extension that
-handles images on both GraphViz and SVG formats (see
-:ref:`sphinx_kfigure`).
+handles images in both GraphViz and SVG formats (see :ref:`sphinx_kfigure`).
 
 For it to work, you need to install both GraphViz and ImageMagick
 packages. If those packages are not installed, the build system will
@@ -108,7 +108,7 @@ further info.
 Checking for Sphinx dependencies
 --------------------------------
 
-There's a script that automatically check for Sphinx dependencies. If it can
+There's a script that automatically checks for Sphinx dependencies. If it can
 recognize your distribution, it will also give a hint about the install
 command line options for your distro::
 
@@ -283,7 +283,7 @@ Here are some specific guidelines for the kernel documentation:
   from highlighting. For a short snippet of code embedded in the text, use \`\`.
 
 
-the C domain
+The C domain
 ------------
 
 The **Sphinx C Domain** (name c) is suited for documentation of C API. E.g. a
diff --git linux-libre-6.8-gnu/Documentation/driver-api/device-io.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/device-io.rst
index d55384b106bd..5c7e8194bef9 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/device-io.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/device-io.rst
@@ -517,6 +517,3 @@ Public Functions Provided
 
 .. kernel-doc:: arch/x86/include/asm/io.h
    :internal:
-
-.. kernel-doc:: lib/pci_iomap.c
-   :export:
diff --git linux-libre-6.8-gnu/Documentation/driver-api/driver-model/devres.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/driver-model/devres.rst
index c5f99d834ec5..7be8b8dd5f00 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/driver-model/devres.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/driver-model/devres.rst
@@ -420,6 +420,7 @@ POWER
   devm_reboot_mode_unregister()
 
 PWM
+  devm_pwmchip_alloc()
   devm_pwmchip_add()
   devm_pwm_get()
   devm_fwnode_pwm_get()
@@ -462,7 +463,7 @@ SLAVE DMA ENGINE
 SPI
   devm_spi_alloc_master()
   devm_spi_alloc_slave()
-  devm_spi_register_master()
+  devm_spi_register_controller()
 
 WATCHDOG
   devm_watchdog_register_device()
diff --git linux-libre-6.8-gnu/Documentation/driver-api/gpio/consumer.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/gpio/consumer.rst
index 3e588b9d678c..ab56ab0dd7a6 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/gpio/consumer.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/gpio/consumer.rst
@@ -222,9 +222,9 @@ Use the following calls to access GPIOs from an atomic context::
 	int gpiod_get_value(const struct gpio_desc *desc);
 	void gpiod_set_value(struct gpio_desc *desc, int value);
 
-The values are boolean, zero for low, nonzero for high. When reading the value
-of an output pin, the value returned should be what's seen on the pin. That
-won't always match the specified output value, because of issues including
+The values are boolean, zero for inactive, nonzero for active. When reading the
+value of an output pin, the value returned should be what's seen on the pin.
+That won't always match the specified output value, because of issues including
 open-drain signaling and output latencies.
 
 The get/set calls do not return errors because "invalid GPIO" should have been
@@ -277,11 +277,11 @@ switch their output to a high impedance value. The consumer should not need to
 care. (For details read about open drain in driver.rst.)
 
 With this, all the gpiod_set_(array)_value_xxx() functions interpret the
-parameter "value" as "asserted" ("1") or "de-asserted" ("0"). The physical line
+parameter "value" as "active" ("1") or "inactive" ("0"). The physical line
 level will be driven accordingly.
 
 As an example, if the active low property for a dedicated GPIO is set, and the
-gpiod_set_(array)_value_xxx() passes "asserted" ("1"), the physical line level
+gpiod_set_(array)_value_xxx() passes "active" ("1"), the physical line level
 will be driven low.
 
 To summarize::
diff --git linux-libre-6.8-gnu/Documentation/driver-api/index.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/index.rst
index eba851605388..f10decc2c14b 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/index.rst
@@ -9,110 +9,141 @@ of device drivers.  This document is an only somewhat organized collection
 of some of those interfaces — it will hopefully get better over time!  The
 available subsections can be seen below.
 
+
+General information for driver authors
+======================================
+
+This section contains documentation that should, at some point or other, be
+of interest to most developers working on device drivers.
+
 .. toctree::
-   :caption: Table of contents
-   :maxdepth: 2
+   :maxdepth: 1
 
-   driver-model/index
    basics
+   driver-model/index
+   device_link
    infrastructure
    ioctl
-   early-userspace/index
    pm/index
-   clk
+
+Useful support libraries
+========================
+
+This section contains documentation that should, at some point or other, be
+of interest to most developers working on device drivers.
+
+.. toctree::
+   :maxdepth: 1
+
+   early-userspace/index
+   connector
    device-io
+   devfreq
    dma-buf
-   device_link
    component
-   message-based
-   infiniband
-   aperture
-   frame-buffer
-   regulator
-   reset
-   iio/index
-   input
-   usb/index
-   firewire
-   pci/index
+   io-mapping
+   io_ordering
+   uio-howto
+   vfio-mediated-device
+   vfio
+   vfio-pci-device-specific-driver-acceptance
+
+Bus-level documentation
+=======================
+
+.. toctree::
+   :maxdepth: 1
+
+   auxiliary_bus
    cxl/index
-   spi
-   i2c
-   ipmb
-   ipmi
+   eisa
+   firewire
    i3c/index
-   interconnect
-   devfreq
-   hsi
-   edac
-   scsi
-   libata
-   target
-   mailbox
-   mtdnand
-   miscellaneous
-   mei/index
-   mtd/index
-   mmc/index
-   nvdimm/index
-   w1
+   isa
+   men-chameleon-bus
+   pci/index
    rapidio/index
-   s390-drivers
+   slimbus
+   usb/index
+   virtio/index
    vme
+   w1
+   xillybus
+
+
+Subsystem-specific APIs
+=======================
+
+.. toctree::
+   :maxdepth: 1
+
    80211/index
-   uio-howto
+   acpi/index
+   backlight/lp855x-driver.rst
+   clk
+   console
+   crypto/index
+   dmaengine/index
+   dpll
+   edac
    firmware/index
-   pin-control
+   fpga/index
+   frame-buffer
+   aperture
+   generic-counter
    gpio/index
+   hsi
+   hte/index
+   i2c
+   iio/index
+   infiniband
+   input
+   interconnect
+   ipmb
+   ipmi
+   libata
+   mailbox
    md/index
    media/index
+   mei/index
+   memory-devices/index
+   message-based
    misc_devices
+   miscellaneous
+   mmc/index
+   mtd/index
+   mtdnand
    nfc/index
-   dmaengine/index
-   slimbus
-   soundwire/index
-   thermal/index
-   fpga/index
-   acpi/index
-   auxiliary_bus
-   backlight/lp855x-driver.rst
-   connector
-   console
-   eisa
-   isa
-   io-mapping
-   io_ordering
-   generic-counter
-   memory-devices/index
-   men-chameleon-bus
    ntb
+   nvdimm/index
    nvmem
    parport-lowlevel
+   phy/index
+   pin-control
+   pldmfw/index
    pps
    ptp
-   phy/index
    pwm
-   pldmfw/index
+   regulator
+   reset
    rfkill
+   s390-drivers
+   scsi
    serial/index
    sm501
+   soundwire/index
+   spi
    surface_aggregator/index
    switchtec
    sync_file
+   target
+   tee
+   thermal/index
    tty/index
-   vfio-mediated-device
-   vfio
-   vfio-pci-device-specific-driver-acceptance
-   virtio/index
+   wbrf
+   wmi
    xilinx/index
-   xillybus
    zorro
-   hte/index
-   wmi
-   dpll
-   wbrf
-   crypto/index
-   tee
 
 .. only::  subproject and html
 
diff --git linux-libre-6.8-gnu/Documentation/driver-api/media/drivers/ccs/ccs.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/media/drivers/ccs/ccs.rst
index 776eec72bc80..5d4451339b7f 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/media/drivers/ccs/ccs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/media/drivers/ccs/ccs.rst
@@ -2,59 +2,16 @@
 
 .. include:: <isonum.txt>
 
+.. _media-ccs-driver:
+
 MIPI CCS camera sensor driver
 =============================
 
 The MIPI CCS camera sensor driver is a generic driver for `MIPI CCS
 <https://www.mipi.org/specifications/camera-command-set>`_ compliant
-camera sensors. It exposes three sub-devices representing the pixel array,
-the binner and the scaler.
-
-As the capabilities of individual devices vary, the driver exposes
-interfaces based on the capabilities that exist in hardware.
-
-Pixel Array sub-device
-----------------------
-
-The pixel array sub-device represents the camera sensor's pixel matrix, as well
-as analogue crop functionality present in many compliant devices. The analogue
-crop is configured using the ``V4L2_SEL_TGT_CROP`` on the source pad (0) of the
-entity. The size of the pixel matrix can be obtained by getting the
-``V4L2_SEL_TGT_NATIVE_SIZE`` target.
-
-Binner
-------
-
-The binner sub-device represents the binning functionality on the sensor. For
-that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the
-sink pad (0).
-
-Additionally, if a device has no scaler or digital crop functionality, the
-source pad (1) exposes another digital crop selection rectangle that can only
-crop at the end of the lines and frames.
-
-Scaler
-------
-
-The scaler sub-device represents the digital crop and scaling functionality of
-the sensor. The V4L2 selection target ``V4L2_SEL_TGT_CROP`` is used to
-configure the digital crop on the sink pad (0) when digital crop is supported.
-Scaling is configured using selection target ``V4L2_SEL_TGT_COMPOSE`` on the
-sink pad (0) as well.
-
-Additionally, if the scaler sub-device exists, its source pad (1) exposes
-another digital crop selection rectangle that can only crop at the end of the
-lines and frames.
-
-Digital and analogue crop
--------------------------
-
-Digital crop functionality is referred to as cropping that effectively works by
-dropping some data on the floor. Analogue crop, on the other hand, means that
-the cropped information is never retrieved. In case of camera sensors, the
-analogue data is never read from the pixel matrix that are outside the
-configured selection rectangle that designates crop. The difference has an
-effect in device timing and likely also in power consumption.
+camera sensors.
+
+Also see :ref:`the CCS driver UAPI documentation <media-ccs-uapi>`.
 
 CCS static data
 ---------------
diff --git linux-libre-6.8-gnu/Documentation/driver-api/media/v4l2-subdev.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/media/v4l2-subdev.rst
index 1db2ba27c54c..13aec460e802 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/media/v4l2-subdev.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/media/v4l2-subdev.rst
@@ -229,7 +229,7 @@ Asynchronous sub-device notifier for sub-devices
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 A driver that registers an asynchronous sub-device may also register an
-asynchronous notifier. This is called an asynchronous sub-device notifier andthe
+asynchronous notifier. This is called an asynchronous sub-device notifier and the
 process is similar to that of a bridge driver apart from that the notifier is
 initialised using :c:func:`v4l2_async_subdev_nf_init` instead. A sub-device
 notifier may complete only after the V4L2 device becomes available, i.e. there's
diff --git linux-libre-6.8-gnu/Documentation/driver-api/pci/pci.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/pci/pci.rst
index 4843cfad4f60..aa40b1cc243b 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/pci/pci.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/pci/pci.rst
@@ -4,6 +4,12 @@ PCI Support Library
 .. kernel-doc:: drivers/pci/pci.c
    :export:
 
+.. kernel-doc:: drivers/pci/iomap.c
+   :export:
+
+.. kernel-doc:: drivers/pci/devres.c
+   :export:
+
 .. kernel-doc:: drivers/pci/pci-driver.c
    :export:
 
diff --git linux-libre-6.8-gnu/Documentation/driver-api/pwm.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/pwm.rst
index 3c28ccc4b611..b41b1c56477f 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/pwm.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/pwm.rst
@@ -143,11 +143,12 @@ to implement the pwm_*() functions itself. This means that it's impossible
 to have multiple PWM drivers in the system. For this reason it's mandatory
 for new drivers to use the generic PWM framework.
 
-A new PWM controller/chip can be added using pwmchip_add() and removed
-again with pwmchip_remove(). pwmchip_add() takes a filled in struct
-pwm_chip as argument which provides a description of the PWM chip, the
-number of PWM devices provided by the chip and the chip-specific
-implementation of the supported PWM operations to the framework.
+A new PWM controller/chip can be allocated using pwmchip_alloc(), then
+registered using pwmchip_add() and removed again with pwmchip_remove(). To undo
+pwmchip_alloc() use pwmchip_put(). pwmchip_add() takes a filled in struct
+pwm_chip as argument which provides a description of the PWM chip, the number
+of PWM devices provided by the chip and the chip-specific implementation of the
+supported PWM operations to the framework.
 
 When implementing polarity support in a PWM driver, make sure to respect the
 signal conventions in the PWM framework. By definition, normal polarity
diff --git linux-libre-6.8-gnu/Documentation/driver-api/soundwire/stream.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/soundwire/stream.rst
index b432a2de45d3..2a794484f62c 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/soundwire/stream.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/soundwire/stream.rst
@@ -324,12 +324,12 @@ framework, this stream state is linked to .hw_params() operation.
 
   int sdw_stream_add_master(struct sdw_bus * bus,
 		struct sdw_stream_config * stream_config,
-		struct sdw_ports_config * ports_config,
+		const struct sdw_ports_config * ports_config,
 		struct sdw_stream_runtime * stream);
 
   int sdw_stream_add_slave(struct sdw_slave * slave,
 		struct sdw_stream_config * stream_config,
-		struct sdw_ports_config * ports_config,
+		const struct sdw_ports_config * ports_config,
 		struct sdw_stream_runtime * stream);
 
 
diff --git linux-libre-6.8-gnu/Documentation/driver-api/tty/console.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/tty/console.rst
new file mode 100644
index 000000000000..4348e36cd33b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/tty/console.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+Console
+=======
+
+.. contents:: :local:
+
+Struct Console
+==============
+
+.. kernel-doc:: include/linux/console.h
+   :identifiers: console cons_flags
+
+Internals
+---------
+
+.. kernel-doc:: include/linux/console.h
+   :identifiers: nbcon_state nbcon_prio nbcon_context nbcon_write_context
+
+Struct Consw
+============
+
+.. kernel-doc:: include/linux/console.h
+   :identifiers: consw
+
+Console functions
+=================
+
+.. kernel-doc:: include/linux/console.h
+   :identifiers: console_srcu_read_flags console_srcu_write_flags
+        console_is_registered for_each_console_srcu for_each_console
+
+.. kernel-doc:: drivers/tty/vt/selection.c
+   :export:
+.. kernel-doc:: drivers/tty/vt/vt.c
+   :export:
+
+Internals
+---------
+
+.. kernel-doc:: drivers/tty/vt/selection.c
+   :internal:
+.. kernel-doc:: drivers/tty/vt/vt.c
+   :internal:
diff --git linux-libre-6.8-gnu/Documentation/driver-api/tty/index.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/tty/index.rst
index b490da11f257..c1ffe3d1ec46 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/tty/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/tty/index.rst
@@ -38,6 +38,7 @@ In-detail description of the named TTY structures is in separate documents:
    tty_buffer
    tty_ioctl
    tty_internals
+   console
 
 Writing TTY Driver
 ==================
diff --git linux-libre-6.8-gnu/Documentation/driver-api/usb/callbacks.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/usb/callbacks.rst
index 2b80cf54bcc3..927da49b8f00 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/usb/callbacks.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/usb/callbacks.rst
@@ -99,8 +99,10 @@ The disconnect() callback
 This callback is a signal to break any connection with an interface.
 You are not allowed any IO to a device after returning from this
 callback. You also may not do any other operation that may interfere
-with another driver bound the interface, eg. a power management
-operation.
+with another driver bound to the interface, eg. a power management
+operation. Outstanding operations on the device must be completed or
+aborted before this callback may return.
+
 If you are called due to a physical disconnection, all your URBs will be
 killed by usbcore. Note that in this case disconnect will be called some
 time after the physical disconnection. Thus your driver must be prepared
diff --git linux-libre-6.8-gnu/Documentation/driver-api/virtio/writing_virtio_drivers.rst linux-libre-6.9-rc6-gnu/Documentation/driver-api/virtio/writing_virtio_drivers.rst
index e14c58796d25..e5de6f5d061a 100644
--- linux-libre-6.8-gnu/Documentation/driver-api/virtio/writing_virtio_drivers.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/driver-api/virtio/writing_virtio_drivers.rst
@@ -97,7 +97,6 @@ like this::
 
 	static struct virtio_driver virtio_dummy_driver = {
 		.driver.name =  KBUILD_MODNAME,
-		.driver.owner = THIS_MODULE,
 		.id_table =     id_table,
 		.probe =        virtio_dummy_probe,
 		.remove =       virtio_dummy_remove,
diff --git linux-libre-6.8-gnu/Documentation/fault-injection/index.rst linux-libre-6.9-rc6-gnu/Documentation/fault-injection/index.rst
index 8408a8a91b34..a6ea1d190222 100644
--- linux-libre-6.8-gnu/Documentation/fault-injection/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/fault-injection/index.rst
@@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0
 
 ===============
-fault-injection
+Fault-injection
 ===============
 
 .. toctree::
diff --git linux-libre-6.8-gnu/Documentation/features/sched/membarrier-sync-core/arch-support.txt linux-libre-6.9-rc6-gnu/Documentation/features/sched/membarrier-sync-core/arch-support.txt
index d96b778b87ed..7425d2b994a3 100644
--- linux-libre-6.8-gnu/Documentation/features/sched/membarrier-sync-core/arch-support.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -10,6 +10,22 @@
 # Rely on implicit context synchronization as a result of exception return
 # when returning from IPI handler, and when returning to user-space.
 #
+# * riscv
+#
+# riscv uses xRET as return from interrupt and to return to user-space.
+#
+# Given that xRET is not core serializing, we rely on FENCE.I for providing
+# core serialization:
+#
+#  - by calling sync_core_before_usermode() on return from interrupt (cf.
+#    ipi_sync_core()),
+#
+#  - via switch_mm() and sync_core_before_usermode() (respectively, for
+#    uthread->uthread and kthread->uthread transitions) before returning
+#    to user-space.
+#
+#  The serialization in switch_mm() is activated by prepare_sync_core_cmd().
+#
 # * x86
 #
 # x86-32 uses IRET as return from interrupt, which takes care of the IPI.
@@ -43,7 +59,7 @@
     |    openrisc: | TODO |
     |      parisc: | TODO |
     |     powerpc: |  ok  |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
     |        s390: |  ok  |
     |          sh: | TODO |
     |       sparc: | TODO |
diff --git linux-libre-6.8-gnu/Documentation/filesystems/bcachefs/errorcodes.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/bcachefs/errorcodes.rst
new file mode 100644
index 000000000000..2cccaa0ba7cd
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/bcachefs/errorcodes.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+bcachefs private error codes
+----------------------------
+
+In bcachefs, as a hard rule we do not throw or directly use standard error
+codes (-EINVAL, -EBUSY, etc.). Instead, we define private error codes as needed
+in fs/bcachefs/errcode.h.
+
+This gives us much better error messages and makes debugging much easier. Any
+direct uses of standard error codes you see in the source code are simply old
+code that has yet to be converted - feel free to clean it up!
+
+Private error codes may subtype another error code, this allows for grouping of
+related errors that should be handled similarly (e.g. transaction restart
+errors), as well as specifying which standard error code should be returned at
+the bcachefs module boundary.
+
+At the module boundary, we use bch2_err_class() to convert to a standard error
+code; this also emits a trace event so that the original error code be
+recovered even if it wasn't logged.
+
+Do not reuse error codes! Generally speaking, a private error code should only
+be thrown in one place. That means that when we see it in a log message we can
+see, unambiguously, exactly which file and line number it was returned from.
+
+Try to give error codes names that are as reasonably descriptive of the error
+as possible. Frequently, the error will be logged at a place far removed from
+where the error was generated; good names for error codes mean much more
+descriptive and useful error messages.
diff --git linux-libre-6.8-gnu/Documentation/filesystems/bcachefs/index.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/bcachefs/index.rst
new file mode 100644
index 000000000000..e2bd61ccd96f
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/bcachefs/index.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+bcachefs Documentation
+======================
+
+.. toctree::
+   :maxdepth: 2
+   :numbered:
+
+   errorcodes
diff --git linux-libre-6.8-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/f2fs.rst
index d32c6209685d..efc3493fd6f8 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/f2fs.rst
@@ -126,9 +126,7 @@ norecovery		 Disable the roll-forward recovery routine, mounted read-
 discard/nodiscard	 Enable/disable real-time discard in f2fs, if discard is
 			 enabled, f2fs will issue discard/TRIM commands when a
 			 segment is cleaned.
-no_heap			 Disable heap-style segment allocation which finds free
-			 segments for data from the beginning of main area, while
-			 for node from the end of main area.
+heap/no_heap		 Deprecated.
 nouser_xattr		 Disable Extended User Attributes. Note: xattr is enabled
 			 by default if CONFIG_F2FS_FS_XATTR is selected.
 noacl			 Disable POSIX Access Control List. Note: acl is enabled
@@ -184,29 +182,31 @@ fault_type=%d		 Support configuring fault injection type, should be
 			 enabled with fault_injection option, fault type value
 			 is shown below, it supports single or combined type.
 
-			 ===================	  ===========
-			 Type_Name		  Type_Value
-			 ===================	  ===========
-			 FAULT_KMALLOC		  0x000000001
-			 FAULT_KVMALLOC		  0x000000002
-			 FAULT_PAGE_ALLOC	  0x000000004
-			 FAULT_PAGE_GET		  0x000000008
-			 FAULT_ALLOC_BIO	  0x000000010 (obsolete)
-			 FAULT_ALLOC_NID	  0x000000020
-			 FAULT_ORPHAN		  0x000000040
-			 FAULT_BLOCK		  0x000000080
-			 FAULT_DIR_DEPTH	  0x000000100
-			 FAULT_EVICT_INODE	  0x000000200
-			 FAULT_TRUNCATE		  0x000000400
-			 FAULT_READ_IO		  0x000000800
-			 FAULT_CHECKPOINT	  0x000001000
-			 FAULT_DISCARD		  0x000002000
-			 FAULT_WRITE_IO		  0x000004000
-			 FAULT_SLAB_ALLOC	  0x000008000
-			 FAULT_DQUOT_INIT	  0x000010000
-			 FAULT_LOCK_OP		  0x000020000
-			 FAULT_BLKADDR		  0x000040000
-			 ===================	  ===========
+			 ===========================      ===========
+			 Type_Name                        Type_Value
+			 ===========================      ===========
+			 FAULT_KMALLOC                    0x000000001
+			 FAULT_KVMALLOC                   0x000000002
+			 FAULT_PAGE_ALLOC                 0x000000004
+			 FAULT_PAGE_GET                   0x000000008
+			 FAULT_ALLOC_BIO                  0x000000010 (obsolete)
+			 FAULT_ALLOC_NID                  0x000000020
+			 FAULT_ORPHAN                     0x000000040
+			 FAULT_BLOCK                      0x000000080
+			 FAULT_DIR_DEPTH                  0x000000100
+			 FAULT_EVICT_INODE                0x000000200
+			 FAULT_TRUNCATE                   0x000000400
+			 FAULT_READ_IO                    0x000000800
+			 FAULT_CHECKPOINT                 0x000001000
+			 FAULT_DISCARD                    0x000002000
+			 FAULT_WRITE_IO                   0x000004000
+			 FAULT_SLAB_ALLOC                 0x000008000
+			 FAULT_DQUOT_INIT                 0x000010000
+			 FAULT_LOCK_OP                    0x000020000
+			 FAULT_BLKADDR_VALIDITY           0x000040000
+			 FAULT_BLKADDR_CONSISTENCE        0x000080000
+			 FAULT_NO_SEGMENT                 0x000100000
+			 ===========================      ===========
 mode=%s			 Control block allocation mode which supports "adaptive"
 			 and "lfs". In "lfs" mode, there should be no random
 			 writes towards main area.
@@ -228,8 +228,6 @@ mode=%s			 Control block allocation mode which supports "adaptive"
 			 option for more randomness.
 			 Please, use these options for your experiments and we strongly
 			 recommend to re-format the filesystem after using these options.
-io_bits=%u		 Set the bit size of write IO requests. It should be set
-			 with "mode=lfs".
 usrquota		 Enable plain user disk quota accounting.
 grpquota		 Enable plain group disk quota accounting.
 prjquota		 Enable plain project quota accounting.
diff --git linux-libre-6.8-gnu/Documentation/filesystems/files.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/files.rst
index 9e38e4c221ca..eb770f891b27 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/files.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/files.rst
@@ -116,7 +116,7 @@ before and after the reference count increment. This pattern can be seen
 in get_file_rcu() and __files_get_rcu().
 
 In addition, it isn't possible to access or check fields in struct file
-without first aqcuiring a reference on it under rcu lookup. Not doing
+without first acquiring a reference on it under rcu lookup. Not doing
 that was always very dodgy and it was only usable for non-pointer data
 in struct file. With SLAB_TYPESAFE_BY_RCU it is necessary that callers
 either first acquire a reference or they must hold the files_lock of the
diff --git linux-libre-6.8-gnu/Documentation/filesystems/fscrypt.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/fscrypt.rst
index e86b886b64d0..04eaab01314b 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/fscrypt.rst
@@ -338,11 +338,14 @@ Supported modes
 
 Currently, the following pairs of encryption modes are supported:
 
-- AES-256-XTS for contents and AES-256-CTS-CBC for filenames
+- AES-256-XTS for contents and AES-256-CBC-CTS for filenames
 - AES-256-XTS for contents and AES-256-HCTR2 for filenames
 - Adiantum for both contents and filenames
-- AES-128-CBC-ESSIV for contents and AES-128-CTS-CBC for filenames
-- SM4-XTS for contents and SM4-CTS-CBC for filenames
+- AES-128-CBC-ESSIV for contents and AES-128-CBC-CTS for filenames
+- SM4-XTS for contents and SM4-CBC-CTS for filenames
+
+Note: in the API, "CBC" means CBC-ESSIV, and "CTS" means CBC-CTS.
+So, for example, FSCRYPT_MODE_AES_256_CTS means AES-256-CBC-CTS.
 
 Authenticated encryption modes are not currently supported because of
 the difficulty of dealing with ciphertext expansion.  Therefore,
@@ -351,11 +354,11 @@ contents encryption uses a block cipher in `XTS mode
 `CBC-ESSIV mode
 <https://en.wikipedia.org/wiki/Disk_encryption_theory#Encrypted_salt-sector_initialization_vector_(ESSIV)>`_,
 or a wide-block cipher.  Filenames encryption uses a
-block cipher in `CTS-CBC mode
+block cipher in `CBC-CTS mode
 <https://en.wikipedia.org/wiki/Ciphertext_stealing>`_ or a wide-block
 cipher.
 
-The (AES-256-XTS, AES-256-CTS-CBC) pair is the recommended default.
+The (AES-256-XTS, AES-256-CBC-CTS) pair is the recommended default.
 It is also the only option that is *guaranteed* to always be supported
 if the kernel supports fscrypt at all; see `Kernel config options`_.
 
@@ -364,7 +367,7 @@ upgrades the filenames encryption to use a wide-block cipher.  (A
 *wide-block cipher*, also called a tweakable super-pseudorandom
 permutation, has the property that changing one bit scrambles the
 entire result.)  As described in `Filenames encryption`_, a wide-block
-cipher is the ideal mode for the problem domain, though CTS-CBC is the
+cipher is the ideal mode for the problem domain, though CBC-CTS is the
 "least bad" choice among the alternatives.  For more information about
 HCTR2, see `the HCTR2 paper <https://eprint.iacr.org/2021/1441.pdf>`_.
 
@@ -375,13 +378,13 @@ the work is done by XChaCha12, which is much faster than AES when AES
 acceleration is unavailable.  For more information about Adiantum, see
 `the Adiantum paper <https://eprint.iacr.org/2018/720.pdf>`_.
 
-The (AES-128-CBC-ESSIV, AES-128-CTS-CBC) pair exists only to support
+The (AES-128-CBC-ESSIV, AES-128-CBC-CTS) pair exists only to support
 systems whose only form of AES acceleration is an off-CPU crypto
 accelerator such as CAAM or CESA that does not support XTS.
 
 The remaining mode pairs are the "national pride ciphers":
 
-- (SM4-XTS, SM4-CTS-CBC)
+- (SM4-XTS, SM4-CBC-CTS)
 
 Generally speaking, these ciphers aren't "bad" per se, but they
 receive limited security review compared to the usual choices such as
@@ -393,7 +396,7 @@ Kernel config options
 
 Enabling fscrypt support (CONFIG_FS_ENCRYPTION) automatically pulls in
 only the basic support from the crypto API needed to use AES-256-XTS
-and AES-256-CTS-CBC encryption.  For optimal performance, it is
+and AES-256-CBC-CTS encryption.  For optimal performance, it is
 strongly recommended to also enable any available platform-specific
 kconfig options that provide acceleration for the algorithm(s) you
 wish to use.  Support for any "non-default" encryption modes typically
@@ -407,7 +410,7 @@ kernel crypto API (see `Inline encryption support`_); in that case,
 the file contents mode doesn't need to supported in the kernel crypto
 API, but the filenames mode still does.
 
-- AES-256-XTS and AES-256-CTS-CBC
+- AES-256-XTS and AES-256-CBC-CTS
     - Recommended:
         - arm64: CONFIG_CRYPTO_AES_ARM64_CE_BLK
         - x86: CONFIG_CRYPTO_AES_NI_INTEL
@@ -433,7 +436,7 @@ API, but the filenames mode still does.
         - x86: CONFIG_CRYPTO_NHPOLY1305_SSE2
         - x86: CONFIG_CRYPTO_NHPOLY1305_AVX2
 
-- AES-128-CBC-ESSIV and AES-128-CTS-CBC:
+- AES-128-CBC-ESSIV and AES-128-CBC-CTS:
     - Mandatory:
         - CONFIG_CRYPTO_ESSIV
         - CONFIG_CRYPTO_SHA256 or another SHA-256 implementation
@@ -521,7 +524,7 @@ alternatively has the file's nonce (for `DIRECT_KEY policies`_) or
 inode number (for `IV_INO_LBLK_64 policies`_) included in the IVs.
 Thus, IV reuse is limited to within a single directory.
 
-With CTS-CBC, the IV reuse means that when the plaintext filenames share a
+With CBC-CTS, the IV reuse means that when the plaintext filenames share a
 common prefix at least as long as the cipher block size (16 bytes for AES), the
 corresponding encrypted filenames will also share a common prefix.  This is
 undesirable.  Adiantum and HCTR2 do not have this weakness, as they are
diff --git linux-libre-6.8-gnu/Documentation/filesystems/index.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/index.rst
index e18bc5ae3b35..1f9b4c905a6a 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/index.rst
@@ -69,6 +69,7 @@ Documentation for filesystem implementations.
    afs
    autofs
    autofs-mount-control
+   bcachefs/index
    befs
    bfs
    btrfs
@@ -98,7 +99,6 @@ Documentation for filesystem implementations.
    isofs
    nilfs2
    nfs/index
-   ntfs
    ntfs3
    ocfs2
    ocfs2-online-filecheck
diff --git linux-libre-6.8-gnu/Documentation/filesystems/locking.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/locking.rst
index d5bf4b6b7509..e664061ed55d 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/locking.rst
@@ -29,7 +29,7 @@ prototypes::
 	char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen);
 	struct vfsmount *(*d_automount)(struct path *path);
 	int (*d_manage)(const struct path *, bool);
-	struct dentry *(*d_real)(struct dentry *, const struct inode *);
+	struct dentry *(*d_real)(struct dentry *, enum d_real_type type);
 
 locking rules:
 
diff --git linux-libre-6.8-gnu/Documentation/filesystems/ntfs.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/ntfs.rst
deleted file mode 100644
index 5bb093a26485..000000000000
--- linux-libre-6.8-gnu/Documentation/filesystems/ntfs.rst
+++ /dev/null
@@ -1,466 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-================================
-The Linux NTFS filesystem driver
-================================
-
-
-.. Table of contents
-
-   - Overview
-   - Web site
-   - Features
-   - Supported mount options
-   - Known bugs and (mis-)features
-   - Using NTFS volume and stripe sets
-     - The Device-Mapper driver
-     - The Software RAID / MD driver
-     - Limitations when using the MD driver
-
-
-Overview
-========
-
-Linux-NTFS comes with a number of user-space programs known as ntfsprogs.
-These include mkntfs, a full-featured ntfs filesystem format utility,
-ntfsundelete used for recovering files that were unintentionally deleted
-from an NTFS volume and ntfsresize which is used to resize an NTFS partition.
-See the web site for more information.
-
-To mount an NTFS 1.2/3.x (Windows NT4/2000/XP/2003) volume, use the file
-system type 'ntfs'.  The driver currently supports read-only mode (with no
-fault-tolerance, encryption or journalling) and very limited, but safe, write
-support.
-
-For fault tolerance and raid support (i.e. volume and stripe sets), you can
-use the kernel's Software RAID / MD driver.  See section "Using Software RAID
-with NTFS" for details.
-
-
-Web site
-========
-
-There is plenty of additional information on the linux-ntfs web site
-at http://www.linux-ntfs.org/
-
-The web site has a lot of additional information, such as a comprehensive
-FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
-userspace utilities, etc.
-
-
-Features
-========
-
-- This is a complete rewrite of the NTFS driver that used to be in the 2.4 and
-  earlier kernels.  This new driver implements NTFS read support and is
-  functionally equivalent to the old ntfs driver and it also implements limited
-  write support.  The biggest limitation at present is that files/directories
-  cannot be created or deleted.  See below for the list of write features that
-  are so far supported.  Another limitation is that writing to compressed files
-  is not implemented at all.  Also, neither read nor write access to encrypted
-  files is so far implemented.
-- The new driver has full support for sparse files on NTFS 3.x volumes which
-  the old driver isn't happy with.
-- The new driver supports execution of binaries due to mmap() now being
-  supported.
-- The new driver supports loopback mounting of files on NTFS which is used by
-  some Linux distributions to enable the user to run Linux from an NTFS
-  partition by creating a large file while in Windows and then loopback
-  mounting the file while in Linux and creating a Linux filesystem on it that
-  is used to install Linux on it.
-- A comparison of the two drivers using::
-
-	time find . -type f -exec md5sum "{}" \;
-
-  run three times in sequence with each driver (after a reboot) on a 1.4GiB
-  NTFS partition, showed the new driver to be 20% faster in total time elapsed
-  (from 9:43 minutes on average down to 7:53).  The time spent in user space
-  was unchanged but the time spent in the kernel was decreased by a factor of
-  2.5 (from 85 CPU seconds down to 33).
-- The driver does not support short file names in general.  For backwards
-  compatibility, we implement access to files using their short file names if
-  they exist.  The driver will not create short file names however, and a
-  rename will discard any existing short file name.
-- The new driver supports exporting of mounted NTFS volumes via NFS.
-- The new driver supports async io (aio).
-- The new driver supports fsync(2), fdatasync(2), and msync(2).
-- The new driver supports readv(2) and writev(2).
-- The new driver supports access time updates (including mtime and ctime).
-- The new driver supports truncate(2) and open(2) with O_TRUNC.  But at present
-  only very limited support for highly fragmented files, i.e. ones which have
-  their data attribute split across multiple extents, is included.  Another
-  limitation is that at present truncate(2) will never create sparse files,
-  since to mark a file sparse we need to modify the directory entry for the
-  file and we do not implement directory modifications yet.
-- The new driver supports write(2) which can both overwrite existing data and
-  extend the file size so that you can write beyond the existing data.  Also,
-  writing into sparse regions is supported and the holes are filled in with
-  clusters.  But at present only limited support for highly fragmented files,
-  i.e. ones which have their data attribute split across multiple extents, is
-  included.  Another limitation is that write(2) will never create sparse
-  files, since to mark a file sparse we need to modify the directory entry for
-  the file and we do not implement directory modifications yet.
-
-Supported mount options
-=======================
-
-In addition to the generic mount options described by the manual page for the
-mount command (man 8 mount, also see man 5 fstab), the NTFS driver supports the
-following mount options:
-
-======================= =======================================================
-iocharset=name		Deprecated option.  Still supported but please use
-			nls=name in the future.  See description for nls=name.
-
-nls=name		Character set to use when returning file names.
-			Unlike VFAT, NTFS suppresses names that contain
-			unconvertible characters.  Note that most character
-			sets contain insufficient characters to represent all
-			possible Unicode characters that can exist on NTFS.
-			To be sure you are not missing any files, you are
-			advised to use nls=utf8 which is capable of
-			representing all Unicode characters.
-
-utf8=<bool>		Option no longer supported.  Currently mapped to
-			nls=utf8 but please use nls=utf8 in the future and
-			make sure utf8 is compiled either as module or into
-			the kernel.  See description for nls=name.
-
-uid=
-gid=
-umask=			Provide default owner, group, and access mode mask.
-			These options work as documented in mount(8).  By
-			default, the files/directories are owned by root and
-			he/she has read and write permissions, as well as
-			browse permission for directories.  No one else has any
-			access permissions.  I.e. the mode on all files is by
-			default rw------- and for directories rwx------, a
-			consequence of the default fmask=0177 and dmask=0077.
-			Using a umask of zero will grant all permissions to
-			everyone, i.e. all files and directories will have mode
-			rwxrwxrwx.
-
-fmask=
-dmask=			Instead of specifying umask which applies both to
-			files and directories, fmask applies only to files and
-			dmask only to directories.
-
-sloppy=<BOOL>		If sloppy is specified, ignore unknown mount options.
-			Otherwise the default behaviour is to abort mount if
-			any unknown options are found.
-
-show_sys_files=<BOOL>	If show_sys_files is specified, show the system files
-			in directory listings.  Otherwise the default behaviour
-			is to hide the system files.
-			Note that even when show_sys_files is specified, "$MFT"
-			will not be visible due to bugs/mis-features in glibc.
-			Further, note that irrespective of show_sys_files, all
-			files are accessible by name, i.e. you can always do
-			"ls -l \$UpCase" for example to specifically show the
-			system file containing the Unicode upcase table.
-
-case_sensitive=<BOOL>	If case_sensitive is specified, treat all file names as
-			case sensitive and create file names in the POSIX
-			namespace.  Otherwise the default behaviour is to treat
-			file names as case insensitive and to create file names
-			in the WIN32/LONG name space.  Note, the Linux NTFS
-			driver will never create short file names and will
-			remove them on rename/delete of the corresponding long
-			file name.
-			Note that files remain accessible via their short file
-			name, if it exists.  If case_sensitive, you will need
-			to provide the correct case of the short file name.
-
-disable_sparse=<BOOL>	If disable_sparse is specified, creation of sparse
-			regions, i.e. holes, inside files is disabled for the
-			volume (for the duration of this mount only).  By
-			default, creation of sparse regions is enabled, which
-			is consistent with the behaviour of traditional Unix
-			filesystems.
-
-errors=opt		What to do when critical filesystem errors are found.
-			Following values can be used for "opt":
-
-			  ========  =========================================
-			  continue  DEFAULT, try to clean-up as much as
-				    possible, e.g. marking a corrupt inode as
-				    bad so it is no longer accessed, and then
-				    continue.
-			  recover   At present only supported is recovery of
-				    the boot sector from the backup copy.
-				    If read-only mount, the recovery is done
-				    in memory only and not written to disk.
-			  ========  =========================================
-
-			Note that the options are additive, i.e. specifying::
-
-			   errors=continue,errors=recover
-
-			means the driver will attempt to recover and if that
-			fails it will clean-up as much as possible and
-			continue.
-
-mft_zone_multiplier=	Set the MFT zone multiplier for the volume (this
-			setting is not persistent across mounts and can be
-			changed from mount to mount but cannot be changed on
-			remount).  Values of 1 to 4 are allowed, 1 being the
-			default.  The MFT zone multiplier determines how much
-			space is reserved for the MFT on the volume.  If all
-			other space is used up, then the MFT zone will be
-			shrunk dynamically, so this has no impact on the
-			amount of free space.  However, it can have an impact
-			on performance by affecting fragmentation of the MFT.
-			In general use the default.  If you have a lot of small
-			files then use a higher value.  The values have the
-			following meaning:
-
-			      =====	    =================================
-			      Value	     MFT zone size (% of volume size)
-			      =====	    =================================
-				1		12.5%
-				2		25%
-				3		37.5%
-				4		50%
-			      =====	    =================================
-
-			Note this option is irrelevant for read-only mounts.
-======================= =======================================================
-
-
-Known bugs and (mis-)features
-=============================
-
-- The link count on each directory inode entry is set to 1, due to Linux not
-  supporting directory hard links.  This may well confuse some user space
-  applications, since the directory names will have the same inode numbers.
-  This also speeds up ntfs_read_inode() immensely.  And we haven't found any
-  problems with this approach so far.  If you find a problem with this, please
-  let us know.
-
-
-Please send bug reports/comments/feedback/abuse to the Linux-NTFS development
-list at sourceforge: linux-ntfs-dev@lists.sourceforge.net
-
-
-Using NTFS volume and stripe sets
-=================================
-
-For support of volume and stripe sets, you can either use the kernel's
-Device-Mapper driver or the kernel's Software RAID / MD driver.  The former is
-the recommended one to use for linear raid.  But the latter is required for
-raid level 5.  For striping and mirroring, either driver should work fine.
-
-
-The Device-Mapper driver
-------------------------
-
-You will need to create a table of the components of the volume/stripe set and
-how they fit together and load this into the kernel using the dmsetup utility
-(see man 8 dmsetup).
-
-Linear volume sets, i.e. linear raid, has been tested and works fine.  Even
-though untested, there is no reason why stripe sets, i.e. raid level 0, and
-mirrors, i.e. raid level 1 should not work, too.  Stripes with parity, i.e.
-raid level 5, unfortunately cannot work yet because the current version of the
-Device-Mapper driver does not support raid level 5.  You may be able to use the
-Software RAID / MD driver for raid level 5, see the next section for details.
-
-To create the table describing your volume you will need to know each of its
-components and their sizes in sectors, i.e. multiples of 512-byte blocks.
-
-For NT4 fault tolerant volumes you can obtain the sizes using fdisk.  So for
-example if one of your partitions is /dev/hda2 you would do::
-
-    $ fdisk -ul /dev/hda
-
-    Disk /dev/hda: 81.9 GB, 81964302336 bytes
-    255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
-    Units = sectors of 1 * 512 = 512 bytes
-
-	Device Boot      Start         End      Blocks   Id  System
-	/dev/hda1   *          63     4209029     2104483+  83  Linux
-	/dev/hda2         4209030    37768814    16779892+  86  NTFS
-	/dev/hda3        37768815    46170809     4200997+  83  Linux
-
-And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 =
-33559785 sectors.
-
-For Win2k and later dynamic disks, you can for example use the ldminfo utility
-which is part of the Linux LDM tools (the latest version at the time of
-writing is linux-ldm-0.0.8.tar.bz2).  You can download it from:
-
-	http://www.linux-ntfs.org/
-
-Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
-into it (cd linux-ldm-0.0.8) and change to the test directory (cd test).  You
-will find the precompiled (i386) ldminfo utility there.  NOTE: You will not be
-able to compile this yourself easily so use the binary version!
-
-Then you would use ldminfo in dump mode to obtain the necessary information::
-
-    $ ./ldminfo --dump /dev/hda
-
-This would dump the LDM database found on /dev/hda which describes all of your
-dynamic disks and all the volumes on them.  At the bottom you will see the
-VOLUME DEFINITIONS section which is all you really need.  You may need to look
-further above to determine which of the disks in the volume definitions is
-which device in Linux.  Hint: Run ldminfo on each of your dynamic disks and
-look at the Disk Id close to the top of the output for each (the PRIVATE HEADER
-section).  You can then find these Disk Ids in the VBLK DATABASE section in the
-<Disk> components where you will get the LDM Name for the disk that is found in
-the VOLUME DEFINITIONS section.
-
-Note you will also need to enable the LDM driver in the Linux kernel.  If your
-distribution did not enable it, you will need to recompile the kernel with it
-enabled.  This will create the LDM partitions on each device at boot time.  You
-would then use those devices (for /dev/hda they would be /dev/hda1, 2, 3, etc)
-in the Device-Mapper table.
-
-You can also bypass using the LDM driver by using the main device (e.g.
-/dev/hda) and then using the offsets of the LDM partitions into this device as
-the "Start sector of device" when creating the table.  Once again ldminfo would
-give you the correct information to do this.
-
-Assuming you know all your devices and their sizes things are easy.
-
-For a linear raid the table would look like this (note all values are in
-512-byte sectors)::
-
-    # Offset into	Size of this	Raid type	Device		Start sector
-    # volume	device						of device
-    0		1028161		linear		/dev/hda1	0
-    1028161		3903762		linear		/dev/hdb2	0
-    4931923		2103211		linear		/dev/hdc1	0
-
-For a striped volume, i.e. raid level 0, you will need to know the chunk size
-you used when creating the volume.  Windows uses 64kiB as the default, so it
-will probably be this unless you changes the defaults when creating the array.
-
-For a raid level 0 the table would look like this (note all values are in
-512-byte sectors)::
-
-    # Offset   Size	    Raid     Number   Chunk  1st        Start	2nd	  Start
-    # into     of the   type     of	      size   Device	in	Device	  in
-    # volume   volume	     stripes			device		  device
-    0	   2056320  striped  2	      128    /dev/hda1	0	/dev/hdb1 0
-
-If there are more than two devices, just add each of them to the end of the
-line.
-
-Finally, for a mirrored volume, i.e. raid level 1, the table would look like
-this (note all values are in 512-byte sectors)::
-
-    # Ofs Size   Raid   Log  Number Region Should Number Source  Start Target Start
-    # in  of the type   type of log size   sync?  of     Device  in    Device in
-    # vol volume		 params		     mirrors	     Device	  Device
-    0    2056320 mirror core 2	16     nosync 2	   /dev/hda1 0   /dev/hdb1 0
-
-If you are mirroring to multiple devices you can specify further targets at the
-end of the line.
-
-Note the "Should sync?" parameter "nosync" means that the two mirrors are
-already in sync which will be the case on a clean shutdown of Windows.  If the
-mirrors are not clean, you can specify the "sync" option instead of "nosync"
-and the Device-Mapper driver will then copy the entirety of the "Source Device"
-to the "Target Device" or if you specified multiple target devices to all of
-them.
-
-Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1),
-and hand it over to dmsetup to work with, like so::
-
-    $ dmsetup create myvolume1 /etc/ntfsvolume1
-
-You can obviously replace "myvolume1" with whatever name you like.
-
-If it all worked, you will now have the device /dev/device-mapper/myvolume1
-which you can then just use as an argument to the mount command as usual to
-mount the ntfs volume.  For example::
-
-    $ mount -t ntfs -o ro /dev/device-mapper/myvolume1 /mnt/myvol1
-
-(You need to create the directory /mnt/myvol1 first and of course you can use
-anything you like instead of /mnt/myvol1 as long as it is an existing
-directory.)
-
-It is advisable to do the mount read-only to see if the volume has been setup
-correctly to avoid the possibility of causing damage to the data on the ntfs
-volume.
-
-
-The Software RAID / MD driver
------------------------------
-
-An alternative to using the Device-Mapper driver is to use the kernel's
-Software RAID / MD driver.  For which you need to set up your /etc/raidtab
-appropriately (see man 5 raidtab).
-
-Linear volume sets, i.e. linear raid, as well as stripe sets, i.e. raid level
-0, have been tested and work fine (though see section "Limitations when using
-the MD driver with NTFS volumes" especially if you want to use linear raid).
-Even though untested, there is no reason why mirrors, i.e. raid level 1, and
-stripes with parity, i.e. raid level 5, should not work, too.
-
-You have to use the "persistent-superblock 0" option for each raid-disk in the
-NTFS volume/stripe you are configuring in /etc/raidtab as the persistent
-superblock used by the MD driver would damage the NTFS volume.
-
-Windows by default uses a stripe chunk size of 64k, so you probably want the
-"chunk-size 64k" option for each raid-disk, too.
-
-For example, if you have a stripe set consisting of two partitions /dev/hda5
-and /dev/hdb1 your /etc/raidtab would look like this::
-
-    raiddev /dev/md0
-	    raid-level	0
-	    nr-raid-disks	2
-	    nr-spare-disks	0
-	    persistent-superblock	0
-	    chunk-size	64k
-	    device		/dev/hda5
-	    raid-disk	0
-	    device		/dev/hdb1
-	    raid-disk	1
-
-For linear raid, just change the raid-level above to "raid-level linear", for
-mirrors, change it to "raid-level 1", and for stripe sets with parity, change
-it to "raid-level 5".
-
-Note for stripe sets with parity you will also need to tell the MD driver
-which parity algorithm to use by specifying the option "parity-algorithm
-which", where you need to replace "which" with the name of the algorithm to
-use (see man 5 raidtab for available algorithms) and you will have to try the
-different available algorithms until you find one that works.  Make sure you
-are working read-only when playing with this as you may damage your data
-otherwise.  If you find which algorithm works please let us know (email the
-linux-ntfs developers list linux-ntfs-dev@lists.sourceforge.net or drop in on
-IRC in channel #ntfs on the irc.freenode.net network) so we can update this
-documentation.
-
-Once the raidtab is setup, run for example raid0run -a to start all devices or
-raid0run /dev/md0 to start a particular md device, in this case /dev/md0.
-
-Then just use the mount command as usual to mount the ntfs volume using for
-example::
-
-    mount -t ntfs -o ro /dev/md0 /mnt/myntfsvolume
-
-It is advisable to do the mount read-only to see if the md volume has been
-setup correctly to avoid the possibility of causing damage to the data on the
-ntfs volume.
-
-
-Limitations when using the Software RAID / MD driver
------------------------------------------------------
-
-Using the md driver will not work properly if any of your NTFS partitions have
-an odd number of sectors.  This is especially important for linear raid as all
-data after the first partition with an odd number of sectors will be offset by
-one or more sectors so if you mount such a partition with write support you
-will cause massive damage to the data on the volume which will only become
-apparent when you try to use the volume again under Windows.
-
-So when using linear raid, make sure that all your partitions have an even
-number of sectors BEFORE attempting to use it.  You have been warned!
-
-Even better is to simply use the Device-Mapper for linear raid and then you do
-not have this problem with odd numbers of sectors.
diff --git linux-libre-6.8-gnu/Documentation/filesystems/proc.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/proc.rst
index 104c6d047d9b..c6a6b9df2104 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/proc.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/proc.rst
@@ -1899,8 +1899,8 @@ For more information on mount propagation see:
 These files provide a method to access a task's comm value. It also allows for
 a task to set its own or one of its thread siblings comm value. The comm value
 is limited in size compared to the cmdline value, so writing anything longer
-then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
-comm value.
+then the kernel's TASK_COMM_LEN (currently 16 chars, including the NUL
+terminator) will result in a truncated comm value.
 
 
 3.7	/proc/<pid>/task/<tid>/children - Information about task children
diff --git linux-libre-6.8-gnu/Documentation/filesystems/vfs.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/vfs.rst
index eebcc0f9e2bc..6e903a903f8f 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/vfs.rst
@@ -1264,7 +1264,7 @@ defined:
 		char *(*d_dname)(struct dentry *, char *, int);
 		struct vfsmount *(*d_automount)(struct path *);
 		int (*d_manage)(const struct path *, bool);
-		struct dentry *(*d_real)(struct dentry *, const struct inode *);
+		struct dentry *(*d_real)(struct dentry *, enum d_real_type type);
 	};
 
 ``d_revalidate``
@@ -1419,16 +1419,14 @@ defined:
 	the dentry being transited from.
 
 ``d_real``
-	overlay/union type filesystems implement this method to return
-	one of the underlying dentries hidden by the overlay.  It is
-	used in two different modes:
+	overlay/union type filesystems implement this method to return one
+	of the underlying dentries of a regular file hidden by the overlay.
 
-	Called from file_dentry() it returns the real dentry matching
-	the inode argument.  The real dentry may be from a lower layer
-	already copied up, but still referenced from the file.  This
-	mode is selected with a non-NULL inode argument.
+	The 'type' argument takes the values D_REAL_DATA or D_REAL_METADATA
+	for returning the real underlying dentry that refers to the inode
+	hosting the file's data or metadata respectively.
 
-	With NULL inode the topmost real underlying dentry is returned.
+	For non-regular files, the 'dentry' argument is returned.
 
 Each dentry has a pointer to its parent dentry, as well as a hash list
 of child dentries.  Child dentries are basically like files in a
diff --git linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-online-fsck-design.rst linux-libre-6.9-rc6-gnu/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
index 352516feef6f..6333697ba3e8 100644
--- linux-libre-6.8-gnu/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
@@ -1915,19 +1915,13 @@ four of those five higher level data structures.
 The fifth use case is discussed in the :ref:`realtime summary <rtsummary>` case
 study.
 
-The most general storage interface supported by the xfile enables the reading
-and writing of arbitrary quantities of data at arbitrary offsets in the xfile.
-This capability is provided by ``xfile_pread`` and ``xfile_pwrite`` functions,
-which behave similarly to their userspace counterparts.
 XFS is very record-based, which suggests that the ability to load and store
 complete records is important.
-To support these cases, a pair of ``xfile_obj_load`` and ``xfile_obj_store``
-functions are provided to read and persist objects into an xfile.
-They are internally the same as pread and pwrite, except that they treat any
-error as an out of memory error.
-For online repair, squashing error conditions in this manner is an acceptable
-behavior because the only reaction is to abort the operation back to userspace.
-All five xfile usecases can be serviced by these four functions.
+To support these cases, a pair of ``xfile_load`` and ``xfile_store``
+functions are provided to read and persist objects into an xfile that treat any
+error as an out of memory error.  For online repair, squashing error conditions
+in this manner is an acceptable behavior because the only reaction is to abort
+the operation back to userspace.
 
 However, no discussion of file access idioms is complete without answering the
 question, "But what about mmap?"
@@ -1939,15 +1933,14 @@ tmpfs can only push a pagecache folio to the swap cache if the folio is neither
 pinned nor locked, which means the xfile must not pin too many folios.
 
 Short term direct access to xfile contents is done by locking the pagecache
-folio and mapping it into kernel address space.
-Programmatic access (e.g. pread and pwrite) uses this mechanism.
-Folio locks are not supposed to be held for long periods of time, so long
-term direct access to xfile contents is done by bumping the folio refcount,
+folio and mapping it into kernel address space.  Object load and store uses this
+mechanism.  Folio locks are not supposed to be held for long periods of time, so
+long term direct access to xfile contents is done by bumping the folio refcount,
 mapping it into kernel address space, and dropping the folio lock.
 These long term users *must* be responsive to memory reclaim by hooking into
 the shrinker infrastructure to know when to release folios.
 
-The ``xfile_get_page`` and ``xfile_put_page`` functions are provided to
+The ``xfile_get_folio`` and ``xfile_put_folio`` functions are provided to
 retrieve the (locked) folio that backs part of an xfile and to release it.
 The only code to use these folio lease functions are the xfarray
 :ref:`sorting<xfarray_sort>` algorithms and the :ref:`in-memory
@@ -2277,13 +2270,12 @@ follows:
    pointing to the xfile.
 
 3. Pass the buffer cache target, buffer ops, and other information to
-   ``xfbtree_create`` to write an initial tree header and root block to the
-   xfile.
+   ``xfbtree_init`` to initialize the passed in ``struct xfbtree`` and write an
+   initial root block to the xfile.
    Each btree type should define a wrapper that passes necessary arguments to
    the creation function.
    For example, rmap btrees define ``xfs_rmapbt_mem_create`` to take care of
    all the necessary details for callers.
-   A ``struct xfbtree`` object will be returned.
 
 4. Pass the xfbtree object to the btree cursor creation function for the
    btree type.
diff --git linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/apei/einj.rst linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
index d6b61d22f525..c52b9da08fa9 100644
--- linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -32,6 +32,10 @@ configuration::
   CONFIG_ACPI_APEI
   CONFIG_ACPI_APEI_EINJ
 
+...and to (optionally) enable CXL protocol error injection set::
+
+  CONFIG_ACPI_APEI_EINJ_CXL
+
 The EINJ user interface is in <debugfs mount point>/apei/einj.
 
 The following files belong to it:
@@ -118,6 +122,24 @@ The following files belong to it:
   this actually works depends on what operations the BIOS actually
   includes in the trigger phase.
 
+CXL error types are supported from ACPI 6.5 onwards (given a CXL port
+is present). The EINJ user interface for CXL error types is at
+<debugfs mount point>/cxl. The following files belong to it:
+
+- einj_types:
+
+  Provides the same functionality as available_error_types above, but
+  for CXL error types
+
+- $dport_dev/einj_inject:
+
+  Injects a CXL error type into the CXL port represented by $dport_dev,
+  where $dport_dev is the name of the CXL port (usually a PCIe device name).
+  Error injections targeting a CXL 2.0+ port can use the legacy interface
+  under <debugfs mount point>/apei/einj, while CXL 1.1/1.0 port injections
+  must use this file.
+
+
 BIOS versions based on the ACPI 4.0 specification have limited options
 in controlling where the errors are injected. Your BIOS may support an
 extension (enabled with the param_extension=1 module parameter, or boot
@@ -181,6 +203,18 @@ You should see something like this in dmesg::
   [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0
   [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 -  area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)
 
+A CXL error injection example with $dport_dev=0000:e0:01.1::
+
+    # cd /sys/kernel/debug/cxl/
+    # ls
+    0000:e0:01.1 0000:0c:00.0
+    # cat einj_types                # See which errors can be injected
+	0x00008000  CXL.mem Protocol Correctable
+	0x00010000  CXL.mem Protocol Uncorrectable non-fatal
+	0x00020000  CXL.mem Protocol Uncorrectable fatal
+    # cd 0000:e0:01.1               # Navigate to dport to inject into
+    # echo 0x8000 > einj_inject     # Inject error
+
 Special notes for injection into SGX enclaves:
 
 There may be a separate BIOS setup option to enable SGX injection.
diff --git linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/enumeration.rst linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/enumeration.rst
index d79f69390991..0165b09c0957 100644
--- linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/enumeration.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/enumeration.rst
@@ -595,7 +595,7 @@ bridges/switches of the board.
 
 For example, let's assume we have a system with a PCIe serial port, an
 Exar XR17V3521, soldered on the main board. This UART chip also includes
-16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
+16 GPIOs and we want to add the property ``gpio-line-names`` [1]_ to these pins.
 In this case, the ``lspci`` output for this component is::
 
 	07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03)
@@ -637,7 +637,7 @@ of the chipset bridge (also called "root port") with address::
 	Bus: 0 - Device: 14 - Function: 1
 
 To find this information, it is necessary to disassemble the BIOS ACPI tables,
-in particular the DSDT (see also [2])::
+in particular the DSDT (see also [2]_)::
 
 	mkdir ~/tables/
 	cd ~/tables/
@@ -667,7 +667,7 @@ device::
 			}
 	... other definitions follow ...
 
-and the _ADR method [3] returns exactly the device/function couple that
+and the _ADR method [3]_ returns exactly the device/function couple that
 we are looking for. With this information and analyzing the above ``lspci``
 output (both the devices list and the devices tree), we can write the following
 ACPI description for the Exar PCIe UART, also adding the list of its GPIO line
@@ -724,10 +724,10 @@ created analyzing the position of the Exar UART in the PCI bus topology.
 References
 ==========
 
-[1] Documentation/firmware-guide/acpi/gpio-properties.rst
+.. [1] Documentation/firmware-guide/acpi/gpio-properties.rst
 
-[2] Documentation/admin-guide/acpi/initrd_table_override.rst
+.. [2] Documentation/admin-guide/acpi/initrd_table_override.rst
 
-[3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address)
+.. [3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address)
     https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf,
     referenced 2020-11-18
diff --git linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/index.rst linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/index.rst
index b6a42f4ffe03..b246902f523f 100644
--- linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/index.rst
@@ -14,7 +14,6 @@ ACPI Support
    dsd/phy
    enumeration
    osi
-   method-customizing
    method-tracing
    DSD-properties-rules
    debug
diff --git linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/method-customizing.rst linux-libre-6.9-rc6-gnu/Documentation/firmware-guide/acpi/method-customizing.rst
deleted file mode 100644
index de3ebcaed4cf..000000000000
--- linux-libre-6.8-gnu/Documentation/firmware-guide/acpi/method-customizing.rst
+++ /dev/null
@@ -1,89 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=======================================
-Linux ACPI Custom Control Method How To
-=======================================
-
-:Author: Zhang Rui <rui.zhang@intel.com>
-
-
-Linux supports customizing ACPI control methods at runtime.
-
-Users can use this to:
-
-1. override an existing method which may not work correctly,
-   or just for debugging purposes.
-2. insert a completely new method in order to create a missing
-   method such as _OFF, _ON, _STA, _INI, etc.
-
-For these cases, it is far simpler to dynamically install a single
-control method rather than override the entire DSDT, because kernel
-rebuild/reboot is not needed and test result can be got in minutes.
-
-.. note::
-
-  - Only ACPI METHOD can be overridden, any other object types like
-    "Device", "OperationRegion", are not recognized. Methods
-    declared inside scope operators are also not supported.
-
-  - The same ACPI control method can be overridden for many times,
-    and it's always the latest one that used by Linux/kernel.
-
-  - To get the ACPI debug object output (Store (AAAA, Debug)),
-    please run::
-
-      echo 1 > /sys/module/acpi/parameters/aml_debug_output
-
-
-1. override an existing method
-==============================
-a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
-   just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat"
-b) disassemble the table by running "iasl -d dsdt.dat".
-c) rewrite the ASL code of the method and save it in a new file,
-d) package the new file (psr.asl) to an ACPI table format.
-   Here is an example of a customized \_SB._AC._PSR method::
-
-      DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715)
-      {
-         Method (\_SB_.AC._PSR, 0, NotSerialized)
-         {
-            Store ("In AC _PSR", Debug)
-            Return (ACON)
-         }
-      }
-
-   Note that the full pathname of the method in ACPI namespace
-   should be used.
-e) assemble the file to generate the AML code of the method.
-   e.g. "iasl -vw 6084 psr.asl" (psr.aml is generated as a result)
-   If parameter "-vw 6084" is not supported by your iASL compiler,
-   please try a newer version.
-f) mount debugfs by "mount -t debugfs none /sys/kernel/debug"
-g) override the old method via the debugfs by running
-   "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method"
-
-2. insert a new method
-======================
-This is easier than overriding an existing method.
-We just need to create the ASL code of the method we want to
-insert and then follow the step c) ~ g) in section 1.
-
-3. undo your changes
-====================
-The "undo" operation is not supported for a new inserted method
-right now, i.e. we can not remove a method currently.
-For an overridden method, in order to undo your changes, please
-save a copy of the method original ASL code in step c) section 1,
-and redo step c) ~ g) to override the method with the original one.
-
-
-.. note:: We can use a kernel with multiple custom ACPI method running,
-   But each individual write to debugfs can implement a SINGLE
-   method override. i.e. if we want to insert/override multiple
-   ACPI methods, we need to redo step c) ~ g) for multiple times.
-
-.. note:: Be aware that root can mis-use this driver to modify arbitrary
-   memory and gain additional rights, if root's privileges got
-   restricted (for example if root is not allowed to load additional
-   modules after boot).
diff --git linux-libre-6.8-gnu/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv
index 882d2518f8ed..3825f00ca9fe 100644
--- linux-libre-6.8-gnu/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv
@@ -16,6 +16,7 @@ Radeon (RX|TM) (PRO|WX) Vega /MI25 /V320 /V340L /8200 /9100 /SSG MxGPU, VEGA10,
 AMD Radeon (Pro) VII /MI50 /MI60, VEGA20, DCE 12, 9.4.0, VCE 4.1.0 / UVD 7.2.0, 4.2.0
 MI100, ARCTURUS, *, 9.4.1, VCN 2.5.0, 4.2.2
 MI200, ALDEBARAN, *, 9.4.2, VCN 2.6.0, 4.4.0
+MI300, AQUA_VANGARAM, *, 9.4.3, VCN 4.0.3, 4.4.2
 AMD Radeon (RX|Pro) 5600(M|XT) /5700 (M|XT|XTB) /W5700, NAVI10, DCN 2.0.0, 10.1.10, VCN 2.0.0, 5.0.0
 AMD Radeon (Pro) 5300 /5500XTB/5500(XT|M) /W5500M /W5500, NAVI14, DCN 2.0.0, 10.1.1, VCN 2.0.2, 5.0.2
 AMD Radeon RX 6800(XT) /6900(XT) /W6800, SIENNA_CICHLID, DCN 3.0.0, 10.3.0, VCN 3.0.0, 5.2.0
@@ -23,4 +24,5 @@ AMD Radeon RX 6700 XT / 6800M / 6700M, NAVY_FLOUNDER, DCN 3.0.0, 10.3.2, VCN 3.0
 AMD Radeon RX 6600(XT) /6600M /W6600 /W6600M, DIMGREY_CAVEFISH, DCN 3.0.2, 10.3.4, VCN 3.0.16, 5.2.4
 AMD Radeon RX 6500M /6300M /W6500M /W6300M, BEIGE_GOBY, DCN 3.0.3, 10.3.5, VCN 3.0.33, 5.2.5
 AMD Radeon RX 7900 XT /XTX, , DCN 3.2.0, 11.0.0, VCN 4.0.0, 6.0.0
+AMD Radeon RX 7800 XT, , DCN 3.2.0, 11.0.3, VCN 4.0.0, 6.0.3
 AMD Radeon RX 7600M (XT) /7700S /7600S, , DCN 3.2.1, 11.0.2, VCN 4.0.4, 6.0.2
diff --git linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/dcn-blocks.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/dcn-blocks.rst
new file mode 100644
index 000000000000..a3fbd3ea028b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/dcn-blocks.rst
@@ -0,0 +1,78 @@
+==========
+DCN Blocks
+==========
+
+In this section, you will find some extra details about some of the DCN blocks
+and the code documentation when it is automatically generated.
+
+DCHUBBUB
+--------
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :internal:
+
+HUBP
+----
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :internal:
+
+DPP
+---
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h
+   :internal:
+
+MPC
+---
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
+   :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
+   :internal:
+
+OPP
+---
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h
+   :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h
+   :internal:
+
+DIO
+---
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h
+   :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h
+   :internal:
diff --git linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/display-contributing.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/display-contributing.rst
new file mode 100644
index 000000000000..fdb2bea01d53
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/display-contributing.rst
@@ -0,0 +1,168 @@
+.. _display_todos:
+
+==============================
+AMDGPU - Display Contributions
+==============================
+
+First of all, if you are here, you probably want to give some technical
+contribution to the display code, and for that, we say thank you :)
+
+This page summarizes some of the issues you can help with; keep in mind that
+this is a static page, and it is always a good idea to try to reach developers
+in the amdgfx or some of the maintainers. Finally, this page follows the DRM
+way of creating a TODO list; for more information, check
+'Documentation/gpu/todo.rst'.
+
+Gitlab issues
+=============
+
+Users can report issues associated with AMD GPUs at:
+
+- https://gitlab.freedesktop.org/drm/amd
+
+Usually, we try to add a proper label to all new tickets to make it easy to
+filter issues. If you can reproduce any problem, you could help by adding more
+information or fixing the issue.
+
+Level: diverse
+
+IGT
+===
+
+`IGT`_ provides many integration tests that can be run on your GPU. We always
+want to pass a large set of tests to increase the test coverage in our CI. If
+you wish to contribute to the display code but are unsure where a good place
+is, we recommend you run all IGT tests and try to fix any failure you see in
+your hardware. Keep in mind that this failure can be an IGT problem or a kernel
+issue; it is necessary to analyze case-by-case.
+
+Level: diverse
+
+.. _IGT: https://gitlab.freedesktop.org/drm/igt-gpu-tools
+
+Compilation
+===========
+
+Fix compilation warnings
+------------------------
+
+Enable the W1 or W2 warning level in the kernel compilation and try to fix the
+issues on the display side.
+
+Level: Starter
+
+Fix compilation issues when using um architecture
+-------------------------------------------------
+
+Linux has a User-mode Linux (UML) feature, and the kernel can be compiled to
+the **um** architecture. Compiling for **um** can bring multiple advantages
+from the test perspective. We currently have some compilation issues in this
+area that we need to fix.
+
+Level: Intermediate
+
+Code Refactor
+=============
+
+Add prefix to DC functions to improve the debug with ftrace
+-----------------------------------------------------------
+
+The Ftrace debug feature (check 'Documentation/trace/ftrace.rst') is a
+fantastic way to check the code path when developers try to make sense of a
+bug. Ftrace provides a filter mechanism that can be useful when the developer
+has some hunch of which part of the code can cause the issue; for this reason,
+if a set of functions has a proper prefix, it becomes easy to create a good
+filter. Additionally, prefixes can improve stack trace readability.
+
+The DC code does not follow some prefix rules, which makes the Ftrace filter
+more complicated and reduces the readability of the stack trace. If you want
+something simple to start contributing to the display, you can make patches for
+adding prefixes to DC functions. To create those prefixes, use part of the file
+name as a prefix for all functions in the target file. Check the
+'amdgpu_dm_crtc.c` and `amdgpu_dm_plane.c` for some references. However, we
+strongly advise not to send huge patches changing these prefixes; otherwise, it
+will be hard to review and test, which can generate second thoughts from
+maintainers. Try small steps; in case of double, you can ask before you put in
+effort. We recommend first looking at folders like dceXYZ, dcnXYZ, basics,
+bios, core, clk_mgr, hwss, resource, and irq.
+
+Level: Starter
+
+Reduce code duplication
+-----------------------
+
+AMD has an extensive portfolio with various dGPUs and APUs that amdgpu
+supports. To maintain the new hardware release cadence, DCE/DCN was designed in
+a modular design, making the bring-up for new hardware fast. Over the years,
+amdgpu accumulated some technical debt in the code duplication area. For this
+task, it would be a good idea to find a tool that can discover code duplication
+(including patterns) and use it as guidance to reduce duplications.
+
+Level: Intermediate
+
+Make atomic_commit_[check|tail] more readable
+---------------------------------------------
+
+The functions responsible for atomic commit and tail are intricate and
+extensive. In particular `amdgpu_dm_atomic_commit_tail` is a long function and
+could benefit from being split into smaller helpers. Improvements in this area
+are more than welcome, but keep in mind that changes in this area will affect
+all ASICs, meaning that refactoring requires a comprehensive verification; in
+other words, this effort can take some time for validation.
+
+Level: Advanced
+
+Documentation
+=============
+
+Expand kernel-doc
+-----------------
+
+Many DC functions do not have a proper kernel-doc; understanding a function and
+adding documentation is a great way to learn more about the amdgpu driver and
+also leave an outstanding contribution to the entire community.
+
+Level: Starter
+
+Beyond AMDGPU
+=============
+
+AMDGPU provides features that are not yet enabled in the userspace. This
+section highlights some of the coolest display features, which could be enabled
+with the userspace developer helper.
+
+Enable underlay
+---------------
+
+AMD display has this feature called underlay (which you can read more about at
+'Documentation/GPU/amdgpu/display/mpo-overview.rst') which is intended to
+save power when playing a video. The basic idea is to put a video in the
+underlay plane at the bottom and the desktop in the plane above it with a hole
+in the video area. This feature is enabled in ChromeOS, and from our data
+measurement, it can save power.
+
+Level: Unknown
+
+Adaptive Backlight Modulation (ABM)
+-----------------------------------
+
+ABM is a feature that adjusts the display panel's backlight level and pixel
+values depending on the displayed image. This power-saving feature can be very
+useful when the system starts to run off battery; since this will impact the
+display output fidelity, it would be good if this option was something that
+users could turn on or off.
+
+Level: Unknown
+
+
+HDR & Color management & VRR
+----------------------------
+
+HDR, Color Management, and VRR are huge topics and it's hard to put these into
+concise ToDos. If you are interested in this topic, we recommend checking some
+blog posts from the community developers to better understand some of the
+specific challenges and people working on the subject. If anyone wants to work
+on some particular part, we can try to help with some basic guidance. Finally,
+keep in mind that we already have some kernel-doc in place for those areas.
+
+Level: Unknown
diff --git linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/display-manager.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/display-manager.rst
index be2651ecdd7f..67a811e6891f 100644
--- linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/display-manager.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/display-manager.rst
@@ -131,9 +131,6 @@ The DRM blend mode and its elements are then mapped by AMDGPU display manager
 (DM) to program the blending configuration of the Multiple Pipe/Plane Combined
 (MPC), as follows:
 
-.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
-   :doc: mpc-overview
-
 .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
    :functions: mpcc_blnd_cfg
 
diff --git linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/index.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/index.rst
index f8a4f53d70d8..f0c342e00a39 100644
--- linux-libre-6.8-gnu/Documentation/gpu/amdgpu/display/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/amdgpu/display/index.rst
@@ -7,18 +7,80 @@ drm/amd/display - Display Core (DC)
 AMD display engine is partially shared with other operating systems; for this
 reason, our Display Core Driver is divided into two pieces:
 
-1. **Display Core (DC)** contains the OS-agnostic components. Things like
+#. **Display Core (DC)** contains the OS-agnostic components. Things like
    hardware programming and resource management are handled here.
-2. **Display Manager (DM)** contains the OS-dependent components. Hooks to the
-   amdgpu base driver and DRM are implemented here.
+#. **Display Manager (DM)** contains the OS-dependent components. Hooks to the
+   amdgpu base driver and DRM are implemented here. For example, you can check
+   display/amdgpu_dm/ folder.
+
+------------------
+DC Code validation
+------------------
+
+Maintaining the same code base across multiple OSes requires a lot of
+synchronization effort between repositories and exhaustive validation. In the
+DC case, we maintain a tree to centralize code from different parts. The shared
+repository has integration tests with our Internal Linux CI farm, and we run a
+comprehensive set of IGT tests in various AMD GPUs/APUs (mostly recent dGPUs
+and APUs). Our CI also checks ARM64/32, PPC64/32, and x86_64/32 compilation
+with DCN enabled and disabled.
+
+When we upstream a new feature or some patches, we pack them in a patchset with
+the prefix **DC Patches for <DATE>**, which is created based on the latest
+`amd-staging-drm-next <https://gitlab.freedesktop.org/agd5f/linux>`_. All of
+those patches are under a DC version tested as follows:
+
+* Ensure that every patch compiles and the entire series pass our set of IGT
+  test in different hardware.
+* Prepare a branch with those patches for our validation team. If there is an
+  error, a developer will debug as fast as possible; usually, a simple bisect
+  in the series is enough to point to a bad change, and two possible actions
+  emerge: fix the issue or drop the patch. If it is not an easy fix, the bad
+  patch is dropped.
+* Finally, developers wait a few days for community feedback before we merge
+  the series.
+
+It is good to stress that the test phase is something that we take extremely
+seriously, and we never merge anything that fails our validation. Follows an
+overview of our test set:
+
+#. Manual test
+    * Multiple Hotplugs with DP and HDMI.
+    * Stress test with multiple display configuration changes via the user interface.
+    * Validate VRR behaviour.
+    * Check PSR.
+    * Validate MPO when playing video.
+    * Test more than two displays connected at the same time.
+    * Check suspend/resume.
+    * Validate FPO.
+    * Check MST.
+#. Automated test
+    * IGT tests in a farm with GPUs and APUs that support DCN and DCE.
+    * Compilation validation with the latest GCC and Clang from LTS distro.
+    * Cross-compilation for PowerPC 64/32, ARM 64/32, and x86 32.
+
+In terms of test setup for CI and manual tests, we usually use:
+
+#. The latest Ubuntu LTS.
+#. In terms of userspace, we only use fully updated open-source components
+   provided by the distribution official package manager.
+#. Regarding IGT, we use the latest code from the upstream.
+#. Most of the manual tests are conducted in the GNome but we also use KDE.
+
+Notice that someone from our test team will always reply to the cover letter
+with the test report.
+
+--------------
+DC Information
+--------------
 
 The display pipe is responsible for "scanning out" a rendered frame from the
 GPU memory (also called VRAM, FrameBuffer, etc.) to a display. In other words,
 it would:
 
-1. Read frame information from memory;
-2. Perform required transformation;
-3. Send pixel data to sink devices.
+#. Read frame information from memory;
+#. Perform required transformation;
+#. Send pixel data to sink devices.
 
 If you want to learn more about our driver details, take a look at the below
 table of content:
@@ -26,7 +88,9 @@ table of content:
 .. toctree::
 
    display-manager.rst
-   dc-debug.rst
    dcn-overview.rst
+   dcn-blocks.rst
    mpo-overview.rst
+   dc-debug.rst
+   display-contributing.rst
    dc-glossary.rst
diff --git linux-libre-6.8-gnu/Documentation/gpu/drm-internals.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/drm-internals.rst
index 5fd20a306718..335de7fcddee 100644
--- linux-libre-6.8-gnu/Documentation/gpu/drm-internals.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/drm-internals.rst
@@ -153,18 +153,6 @@ Managed Resources
 .. kernel-doc:: include/drm/drm_managed.h
    :internal:
 
-Bus-specific Device Registration and PCI Support
-------------------------------------------------
-
-A number of functions are provided to help with device registration. The
-functions deal with PCI and platform devices respectively and are only
-provided for historical reasons. These are all deprecated and shouldn't
-be used in new drivers. Besides that there's a few helpers for pci
-drivers.
-
-.. kernel-doc:: drivers/gpu/drm/drm_pci.c
-   :export:
-
 Open/Close, File Operations and IOCTLs
 ======================================
 
diff --git linux-libre-6.8-gnu/Documentation/gpu/drm-usage-stats.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/drm-usage-stats.rst
index 7aca5c7a7b1d..6dc299343b48 100644
--- linux-libre-6.8-gnu/Documentation/gpu/drm-usage-stats.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/drm-usage-stats.rst
@@ -138,7 +138,7 @@ indicating kibi- or mebi-bytes.
 
 - drm-shared-<region>: <uint> [KiB|MiB]
 
-The total size of buffers that are shared with another file (ie. have more
+The total size of buffers that are shared with another file (e.g., have more
 than a single handle).
 
 - drm-total-<region>: <uint> [KiB|MiB]
diff --git linux-libre-6.8-gnu/Documentation/gpu/introduction.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/introduction.rst
index f05eccd2c07c..b7c0baf97dbe 100644
--- linux-libre-6.8-gnu/Documentation/gpu/introduction.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/introduction.rst
@@ -164,6 +164,8 @@ Conference talks
 Slides and articles
 -------------------
 
+* `The Linux graphics stack in a nutshell, part 1 <https://lwn.net/Articles/955376/>`_ - Thomas Zimmermann (2023)
+* `The Linux graphics stack in a nutshell, part 2 <https://lwn.net/Articles/955708/>`_ - Thomas Zimmermann (2023)
 * `Understanding the Linux Graphics Stack <https://bootlin.com/doc/training/graphics/graphics-slides.pdf>`_ - Bootlin (2022)
 * `DRM KMS overview <https://wiki.st.com/stm32mpu/wiki/DRM_KMS_overview>`_ - STMicroelectronics (2021)
 * `Linux graphic stack <https://studiopixl.com/2017-05-13/linux-graphic-stack-an-overview>`_ - Nathan Gauër (2017)
diff --git linux-libre-6.8-gnu/Documentation/gpu/rfc/index.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/rfc/index.rst
index e4f7b005138d..476719771eef 100644
--- linux-libre-6.8-gnu/Documentation/gpu/rfc/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/rfc/index.rst
@@ -31,7 +31,3 @@ host such documentation:
 .. toctree::
 
     i915_vm_bind.rst
-
-.. toctree::
-
-   xe.rst
diff --git linux-libre-6.8-gnu/Documentation/gpu/rfc/xe.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/rfc/xe.rst
deleted file mode 100644
index 97cf87578f97..000000000000
--- linux-libre-6.8-gnu/Documentation/gpu/rfc/xe.rst
+++ /dev/null
@@ -1,234 +0,0 @@
-==========================
-Xe – Merge Acceptance Plan
-==========================
-Xe is a new driver for Intel GPUs that supports both integrated and
-discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
-
-This document aims to establish a merge plan for the Xe, by writing down clear
-pre-merge goals, in order to avoid unnecessary delays.
-
-Xe – Overview
-=============
-The main motivation of Xe is to have a fresh base to work from that is
-unencumbered by older platforms, whilst also taking the opportunity to
-rearchitect our driver to increase sharing across the drm subsystem, both
-leveraging and allowing us to contribute more towards other shared components
-like TTM and drm/scheduler.
-
-This is also an opportunity to start from the beginning with a clean uAPI that is
-extensible by design and already aligned with the modern userspace needs. For
-this reason, the memory model is solely based on GPU Virtual Address space
-bind/unbind (‘VM_BIND’) of GEM buffer objects (BOs) and execution only supporting
-explicit synchronization. With persistent mapping across the execution, the
-userspace does not need to provide a list of all required mappings during each
-submission.
-
-The new driver leverages a lot from i915. As for display, the intent is to share
-the display code with the i915 driver so that there is maximum reuse there.
-
-As for the power management area, the goal is to have a much-simplified support
-for the system suspend states (S-states), PCI device suspend states (D-states),
-GPU/Render suspend states (R-states) and frequency management. It should leverage
-as much as possible all the existent PCI-subsystem infrastructure (pm and
-runtime_pm) and underlying firmware components such PCODE and GuC for the power
-states and frequency decisions.
-
-Repository:
-
-https://gitlab.freedesktop.org/drm/xe/kernel (branch drm-xe-next)
-
-Xe – Platforms
-==============
-Currently, Xe is already functional and has experimental support for multiple
-platforms starting from Tiger Lake, with initial support in userspace implemented
-in Mesa (for Iris and Anv, our OpenGL and Vulkan drivers), as well as in NEO
-(for OpenCL and Level0).
-
-During a transition period, platforms will be supported by both Xe and i915.
-However, the force_probe mechanism existent in both drivers will allow only one
-official and by-default probe at a given time.
-
-For instance, in order to probe a DG2 which PCI ID is 0x5690 by Xe instead of
-i915, the following set of parameters need to be used:
-
-```
-i915.force_probe=!5690 xe.force_probe=5690
-```
-
-In both drivers, the ‘.require_force_probe’ protection forces the user to use the
-force_probe parameter while the driver is under development. This protection is
-only removed when the support for the platform and the uAPI are stable. Stability
-which needs to be demonstrated by CI results.
-
-In order to avoid user space regressions, i915 will continue to support all the
-current platforms that are already out of this protection. Xe support will be
-forever experimental and dependent on the usage of force_probe for these
-platforms.
-
-When the time comes for Xe, the protection will be lifted on Xe and kept in i915.
-
-Xe – Pre-Merge Goals - Work-in-Progress
-=======================================
-
-Display integration with i915
------------------------------
-In order to share the display code with the i915 driver so that there is maximum
-reuse, the i915/display/ code is built twice, once for i915.ko and then for
-xe.ko. Currently, the i915/display code in Xe tree is polluted with many 'ifdefs'
-depending on the build target. The goal is to refactor both Xe and i915/display
-code simultaneously in order to get a clean result before they land upstream, so
-that display can already be part of the initial pull request towards drm-next.
-
-However, display code should not gate the acceptance of Xe in upstream. Xe
-patches will be refactored in a way that display code can be removed, if needed,
-from the first pull request of Xe towards drm-next. The expectation is that when
-both drivers are part of the drm-tip, the introduction of cleaner patches will be
-easier and speed up.
-
-Xe – uAPI high level overview
-=============================
-
-...Warning: To be done in follow up patches after/when/where the main consensus in various items are individually reached.
-
-Xe – Pre-Merge Goals - Completed
-================================
-
-Drm_exec
---------
-Helper to make dma_resv locking for a big number of buffers is getting removed in
-the drm_exec series proposed in https://patchwork.freedesktop.org/patch/524376/
-If that happens, Xe needs to change and incorporate the changes in the driver.
-The goal is to engage with the Community to understand if the best approach is to
-move that to the drivers that are using it or if we should keep the helpers in
-place waiting for Xe to get merged.
-
-This item ties into the GPUVA, VM_BIND, and even long-running compute support.
-
-As a key measurable result, we need to have a community consensus documented in
-this document and the Xe driver prepared for the changes, if necessary.
-
-Userptr integration and vm_bind
--------------------------------
-Different drivers implement different ways of dealing with execution of userptr.
-With multiple drivers currently introducing support to VM_BIND, the goal is to
-aim for a DRM consensus on what’s the best way to have that support. To some
-extent this is already getting addressed itself with the GPUVA where likely the
-userptr will be a GPUVA with a NULL GEM call VM bind directly on the userptr.
-However, there are more aspects around the rules for that and the usage of
-mmu_notifiers, locking and other aspects.
-
-This task here has the goal of introducing a documentation of the basic rules.
-
-The documentation *needs* to first live in this document (API session below) and
-then moved to another more specific document or at Xe level or at DRM level.
-
-Documentation should include:
-
- * The userptr part of the VM_BIND api.
-
- * Locking, including the page-faulting case.
-
- * O(1) complexity under VM_BIND.
-
-The document is now included in the drm documentation :doc:`here </gpu/drm-vm-bind-async>`.
-
-Some parts of userptr like mmu_notifiers should become GPUVA or DRM helpers when
-the second driver supporting VM_BIND+userptr appears. Details to be defined when
-the time comes.
-
-The DRM GPUVM helpers do not yet include the userptr parts, but discussions
-about implementing them are ongoing.
-
-ASYNC VM_BIND
--------------
-Although having a common DRM level IOCTL for VM_BIND is not a requirement to get
-Xe merged, it is mandatory to have a consensus with other drivers and Mesa.
-It needs to be clear how to handle async VM_BIND and interactions with userspace
-memory fences. Ideally with helper support so people don't get it wrong in all
-possible ways.
-
-As a key measurable result, the benefits of ASYNC VM_BIND and a discussion of
-various flavors, error handling and sample API suggestions are documented in
-:doc:`The ASYNC VM_BIND document </gpu/drm-vm-bind-async>`.
-
-Drm_scheduler
--------------
-Xe primarily uses Firmware based scheduling (GuC FW). However, it will use
-drm_scheduler as the scheduler ‘frontend’ for userspace submission in order to
-resolve syncobj and dma-buf implicit sync dependencies. However, drm_scheduler is
-not yet prepared to handle the 1-to-1 relationship between drm_gpu_scheduler and
-drm_sched_entity.
-
-Deeper changes to drm_scheduler should *not* be required to get Xe accepted, but
-some consensus needs to be reached between Xe and other community drivers that
-could also benefit from this work, for coupling FW based/assisted submission such
-as the ARM’s new Mali GPU driver, and others.
-
-As a key measurable result, the patch series introducing Xe itself shall not
-depend on any other patch touching drm_scheduler itself that was not yet merged
-through drm-misc. This, by itself, already includes the reach of an agreement for
-uniform 1 to 1 relationship implementation / usage across drivers.
-
-Long running compute: minimal data structure/scaffolding
---------------------------------------------------------
-The generic scheduler code needs to include the handling of endless compute
-contexts, with the minimal scaffolding for preempt-ctx fences (probably on the
-drm_sched_entity) and making sure drm_scheduler can cope with the lack of job
-completion fence.
-
-The goal is to achieve a consensus ahead of Xe initial pull-request, ideally with
-this minimal drm/scheduler work, if needed, merged to drm-misc in a way that any
-drm driver, including Xe, could re-use and add their own individual needs on top
-in a next stage. However, this should not block the initial merge.
-
-Dev_coredump
-------------
-
-Xe needs to align with other drivers on the way that the error states are
-dumped, avoiding a Xe only error_state solution. The goal is to use devcoredump
-infrastructure to report error states, since it produces a standardized way
-by exposing a virtual and temporary /sys/class/devcoredump device.
-
-As the key measurable result, Xe driver needs to provide GPU snapshots captured
-at hang time through devcoredump, but without depending on any core modification
-of devcoredump infrastructure itself.
-
-Later, when we are in-tree, the goal is to collaborate with devcoredump
-infrastructure with overall possible improvements, like multiple file support
-for better organization of the dumps, snapshot support, dmesg extra print,
-and whatever may make sense and help the overall infrastructure.
-
-DRM_VM_BIND
------------
-Nouveau, and Xe are all implementing ‘VM_BIND’ and new ‘Exec’ uAPIs in order to
-fulfill the needs of the modern uAPI. Xe merge should *not* be blocked on the
-development of a common new drm_infrastructure. However, the Xe team needs to
-engage with the community to explore the options of a common API.
-
-As a key measurable result, the DRM_VM_BIND needs to be documented in this file
-below, or this entire block deleted if the consensus is for independent drivers
-vm_bind ioctls.
-
-Although having a common DRM level IOCTL for VM_BIND is not a requirement to get
-Xe merged, it is mandatory to enforce the overall locking scheme for all major
-structs and list (so vm and vma). So, a consensus is needed, and possibly some
-common helpers. If helpers are needed, they should be also documented in this
-document.
-
-GPU VA
-------
-Two main goals of Xe are meeting together here:
-
-1) Have an uAPI that aligns with modern UMD needs.
-
-2) Early upstream engagement.
-
-RedHat engineers working on Nouveau proposed a new DRM feature to handle keeping
-track of GPU virtual address mappings. This is still not merged upstream, but
-this aligns very well with our goals and with our VM_BIND. The engagement with
-upstream and the port of Xe towards GPUVA is already ongoing.
-
-As a key measurable result, Xe needs to be aligned with the GPU VA and working in
-our tree. Missing Nouveau patches should *not* block Xe and any needed GPUVA
-related patch should be independent and present on dri-devel or acked by
-maintainers to go along with the first Xe pull request towards drm-next.
diff --git linux-libre-6.8-gnu/Documentation/gpu/todo.rst linux-libre-6.9-rc6-gnu/Documentation/gpu/todo.rst
index 41a264bf84ce..fb9ad120b141 100644
--- linux-libre-6.8-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/gpu/todo.rst
@@ -120,6 +120,29 @@ Contact: Daniel Vetter, respective driver maintainers
 
 Level: Advanced
 
+Rename drm_atomic_state
+-----------------------
+
+The KMS framework uses two slightly different definitions for the ``state``
+concept. For a given object (plane, CRTC, encoder, etc., so
+``drm_$OBJECT_state``), the state is the entire state of that object. However,
+at the device level, ``drm_atomic_state`` refers to a state update for a
+limited number of objects.
+
+The state isn't the entire device state, but only the full state of some
+objects in that device. This is confusing to newcomers, and
+``drm_atomic_state`` should be renamed to something clearer like
+``drm_atomic_commit``.
+
+In addition to renaming the structure itself, it would also imply renaming some
+related functions (``drm_atomic_state_alloc``, ``drm_atomic_state_get``,
+``drm_atomic_state_put``, ``drm_atomic_state_init``,
+``__drm_atomic_state_free``, etc.).
+
+Contact: Maxime Ripard <mripard@kernel.org>
+
+Level: Advanced
+
 Fallout from atomic KMS
 -----------------------
 
diff --git linux-libre-6.8-gnu/Documentation/hwmon/aspeed-g6-pwm-tach.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/aspeed-g6-pwm-tach.rst
new file mode 100644
index 000000000000..17398fe397fe
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/aspeed-g6-pwm-tach.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver aspeed-g6-pwm-tach
+=================================
+
+Supported chips:
+	ASPEED AST2600
+
+Authors:
+	<billy_tsai@aspeedtech.com>
+
+Description:
+------------
+This driver implements support for ASPEED AST2600 Fan Tacho controller.
+The controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= ======================================================
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+fanX_div	rw	Fan divisor: Supported value are power of 4 (1, 4, 16
+                        64, ... 4194304)
+                        The larger divisor, the less rpm accuracy and the less
+                        affected by fan signal glitch.
+=============== ======= ======================================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/asus_rog_ryujin.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/asus_rog_ryujin.rst
new file mode 100644
index 000000000000..9f77da070022
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/asus_rog_ryujin.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_rog_ryujin
+=============================
+
+Supported devices:
+
+* ASUS ROG RYUJIN II 360
+
+Author: Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for the listed ASUS ROG RYUJIN
+all-in-one CPU liquid coolers. Available sensors are pump, internal and external
+(controller) fan speed in RPM, their duties in PWM, as well as coolant temperature.
+
+Attaching external fans to the controller is optional and allows them to be
+controlled from the device. If not connected, the fan-related sensors will
+report zeroes. The controller is a separate hardware unit that comes bundled
+with the AIO and connects to it to allow fan control.
+
+The addressable LCD screen is not supported in this driver and should
+be controlled through userspace tools.
+
+Usage notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+=========== =============================================
+fan1_input  Pump speed (in rpm)
+fan2_input  Internal fan speed (in rpm)
+fan3_input  External (controller) fan 1 speed (in rpm)
+fan4_input  External (controller) fan 2 speed (in rpm)
+fan5_input  External (controller) fan 3 speed (in rpm)
+fan6_input  External (controller) fan 4 speed (in rpm)
+temp1_input Coolant temperature (in millidegrees Celsius)
+pwm1        Pump duty
+pwm2        Internal fan duty
+pwm3        External (controller) fan duty
+=========== =============================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/chipcap2.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/chipcap2.rst
new file mode 100644
index 000000000000..dc165becc64c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/chipcap2.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver ChipCap2
+======================
+
+Supported chips:
+
+  * Amphenol CC2D23, CC2D23S, CC2D25, CC2D25S, CC2D33, CC2D33S, CC2D35, CC2D35S
+
+    Prefix: 'chipcap2'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+Author:
+
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+Description
+-----------
+
+This driver implements support for the Amphenol ChipCap 2, a humidity and
+temperature chip family. Temperature is measured in milli degrees celsius,
+relative humidity is expressed as a per cent mille. The measurement ranges
+are the following:
+
+  - Relative humidity: 0 to 100000 pcm (14-bit resolution)
+  - Temperature: -40000 to +125000 m°C (14-bit resolution)
+
+The device communicates with the I2C protocol and uses the I2C address 0x28
+by default.
+
+Depending on the hardware configuration, up to two humidity alarms to control
+minimum and maximum values are provided. Their thresholds and hystersis can be
+configured via sysfs.
+
+Thresholds and hysteris must be provided as a per cent mille. These values
+might be truncated to match the 14-bit device resolution (6.1 pcm/LSB)
+
+Known Issues
+------------
+
+The driver does not support I2C address and command window length modification.
+
+sysfs-Interface
+---------------
+
+The following list includes the sysfs attributes that the driver always provides,
+their permissions and a short description:
+
+=============================== ======= ========================================
+Name                            Perm    Description
+=============================== ======= ========================================
+temp1_input:                    RO      temperature input
+humidity1_input:                RO      humidity input
+=============================== ======= ========================================
+
+The following list includes the sysfs attributes that the driver may provide
+depending on the hardware configuration:
+
+=============================== ======= ========================================
+Name                            Perm    Description
+=============================== ======= ========================================
+humidity1_min:                  RW      humidity low limit. Measurements under
+                                        this limit trigger a humidity low alarm
+humidity1_max:                  RW      humidity high limit. Measurements above
+                                        this limit trigger a humidity high alarm
+humidity1_min_hyst:             RW      humidity low hystersis
+humidity1_max_hyst:             RW      humidity high hystersis
+humidity1_min_alarm:            RO      humidity low alarm indicator
+humidity1_max_alarm:            RO      humidity high alarm indicator
+=============================== ======= ========================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/emc2305.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/emc2305.rst
index 2403dbaf2728..d0bfffe46358 100644
--- linux-libre-6.8-gnu/Documentation/hwmon/emc2305.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/emc2305.rst
@@ -6,7 +6,6 @@ Kernel driver emc2305
 Supported chips:
    Microchip EMC2305, EMC2303, EMC2302, EMC2301
 
-   Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d
    Prefixes: 'emc2305'
 
    Datasheet: Publicly available at the Microchip website :
diff --git linux-libre-6.8-gnu/Documentation/hwmon/index.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/index.rst
index c7ed1f73ac06..1ca7a4fe1f8f 100644
--- linux-libre-6.8-gnu/Documentation/hwmon/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/index.rst
@@ -44,13 +44,16 @@ Hardware Monitoring Kernel Drivers
    aquacomputer_d5next
    asb100
    asc7621
+   aspeed-g6-pwm-tach
    aspeed-pwm-tacho
    asus_ec_sensors
+   asus_rog_ryujin
    asus_wmi_sensors
    bcm54140
    bel-pfe
    bpa-rs600
    bt1-pvt
+   chipcap2
    coretemp
    corsair-cpro
    corsair-psu
@@ -129,6 +132,7 @@ Hardware Monitoring Kernel Drivers
    ltc4245
    ltc4260
    ltc4261
+   ltc4282
    ltc4286
    max127
    max15301
@@ -163,6 +167,7 @@ Hardware Monitoring Kernel Drivers
    mp2975
    mp5023
    mp5990
+   mpq8785
    nct6683
    nct6775
    nct7802
@@ -171,6 +176,7 @@ Hardware Monitoring Kernel Drivers
    nsa320
    ntc_thermistor
    nzxt-kraken2
+   nzxt-kraken3
    nzxt-smart2
    occ
    oxp-sensors
@@ -185,6 +191,7 @@ Hardware Monitoring Kernel Drivers
    pmbus
    powerz
    powr1220
+   pt5161l
    pxe1610
    pwm-fan
    q54sj108a2
@@ -208,6 +215,7 @@ Hardware Monitoring Kernel Drivers
    smsc47m1
    sparx5-temp
    stpddc60
+   surface_fan
    sy7636a-hwmon
    tc654
    tc74
diff --git linux-libre-6.8-gnu/Documentation/hwmon/ltc4282.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/ltc4282.rst
new file mode 100644
index 000000000000..a87ec3564998
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/ltc4282.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel drivers ltc4282
+==========================================
+
+Supported chips:
+
+  * Analog Devices LTC4282
+
+    Prefix: 'ltc4282'
+
+    Addresses scanned: - I2C 0x40 - 0x5A (7-bit)
+    Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit)
+
+    Datasheet:
+
+        https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+Author: Nuno Sá <nuno.sa@analog.com>
+
+Description
+___________
+
+The LTC4282 hot swap controller allows a board to be safely inserted and removed
+from a live backplane. Using one or more external N-channel pass transistors,
+board supply voltage and inrush current are ramped up at an adjustable rate. An
+I2C interface and onboard ADC allows for monitoring of board current, voltage,
+power, energy and fault status. The device features analog foldback current
+limiting and supply monitoring for applications from 2.9V to 33V. Dual 12V gate
+drive allows high power applications to either share safe operating area across
+parallel MOSFETs or support a 2-stage start-up that first charges the load
+capacitance followed by enabling a low on-resistance path to the load. The
+LTC4282 is well suited to high power applications because the precise monitoring
+capability and accurate current limiting reduce the extremes in which both loads
+and power supplies must safely operate. Non-volatile configuration allows for
+flexibility in the autonomous generation of alerts and response to faults.
+
+Sysfs entries
+_____________
+
+The following attributes are supported. Limits are read-write and all the other
+attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling
+one disables the other and disabling one enables the other.
+
+======================= ==========================================
+in0_input		Output voltage (mV).
+in0_min			Undervoltage threshold
+in0_max                 Overvoltage threshold
+in0_lowest		Lowest measured voltage
+in0_highest		Highest measured voltage
+in0_reset_history	Write 1 to reset in0 history.
+			Also clears fet bad and short fault logs.
+in0_min_alarm		Undervoltage alarm
+in0_max_alarm           Overvoltage alarm
+in0_enable		Enable/Disable VSOURCE monitoring
+in0_fault		Failure in the MOSFETs. Either bad or shorted FET.
+in0_label		Channel label (VSOURCE)
+
+in1_input		Input voltage (mV).
+in1_min			Undervoltage threshold
+in1_max                 Overvoltage threshold
+in1_lowest		Lowest measured voltage
+in1_highest		Highest measured voltage
+in1_reset_history	Write 1 to reset in1 history.
+			Also clears over/undervoltage fault logs.
+in1_min_alarm		Undervoltage alarm
+in1_max_alarm           Overvoltage alarm
+in1_lcrit_alarm         Critical Undervoltage alarm
+in1_crit_alarm          Critical Overvoltage alarm
+in1_enable		Enable/Disable VDD monitoring
+in1_label		Channel label (VDD)
+
+in2_input		GPIO voltage (mV)
+in2_min			Undervoltage threshold
+in2_max			Overvoltage threshold
+in2_lowest		Lowest measured voltage
+in2_highest		Highest measured voltage
+in2_reset_history	Write 1 to reset in2 history
+in2_min_alarm		Undervoltage alarm
+in2_max_alarm		Overvoltage alarm
+in2_label		Channel label (VGPIO)
+
+curr1_input		Sense current (mA)
+curr1_min		Undercurrent threshold
+curr1_max		Overcurrent threshold
+curr1_lowest		Lowest measured current
+curr1_highest		Highest measured current
+curr1_reset_history	Write 1 to reset curr1 history.
+			Also clears overcurrent fault logs.
+curr1_min_alarm		Undercurrent alarm
+curr1_max_alarm		Overcurrent alarm
+curr1_crit_alarm        Critical Overcurrent alarm
+curr1_label		Channel label (ISENSE)
+
+power1_input		Power (in uW)
+power1_min		Low power threshold
+power1_max		High power threshold
+power1_input_lowest	Historical minimum power use
+power1_input_highest	Historical maximum power use
+power1_reset_history	Write 1 to reset power1 history.
+			Also clears power bad fault logs.
+power1_min_alarm	Low power alarm
+power1_max_alarm	High power alarm
+power1_label		Channel label (Power)
+
+energy1_input		Measured energy over time (in microJoule)
+energy1_enable		Enable/Disable Energy accumulation
+======================= ==========================================
+
+DebugFs entries
+_______________
+
+The chip also has a fault log register where failures can be logged. Hence,
+as these are logging events, we give access to them in debugfs. Note that
+even if some failure is detected in these logs, it does necessarily mean
+that the failure is still present. As mentioned in the proper Sysfs entries,
+these logs can be cleared by writing in the proper reset_history attribute.
+
+.. warning:: The debugfs interface is subject to change without notice
+             and is only available when the kernel is compiled with
+             ``CONFIG_DEBUG_FS`` defined.
+
+``/sys/kernel/debug/ltc4282-hwmon[X]/``
+contains the following attributes:
+
+=======================  ==========================================
+power1_bad_fault_log     Set to 1 by a power1 bad fault occurring.
+in0_fet_short_fault_log	 Set to 1 when the ADC detects a FET-short fault.
+in0_fet_bad_fault_log    Set to 1 when a FET-BAD fault occurs.
+in1_crit_fault_log       Set to 1 by a VDD overvoltage fault occurring.
+in1_lcrit_fault_log      Set to 1 by a VDD undervoltage fault occurring.
+curr1_crit_fault_log	 Set to 1 by an overcurrent fault occurring.
+=======================  ==========================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/max6620.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/max6620.rst
index 84c1c44d3de4..d70173bf0242 100644
--- linux-libre-6.8-gnu/Documentation/hwmon/max6620.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/max6620.rst
@@ -11,7 +11,7 @@ Supported chips:
 
     Addresses scanned: none
 
-    Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6620.pdf
 
 Authors:
     - L\. Grunenberg <contact@lgrunenberg.de>
diff --git linux-libre-6.8-gnu/Documentation/hwmon/mpq8785.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/mpq8785.rst
new file mode 100644
index 000000000000..bf8176b87086
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/mpq8785.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver mpq8785
+=======================
+
+Supported chips:
+
+  * MPS MPQ8785
+
+    Prefix: 'mpq8785'
+
+Author: Charles Hsu <ythsu0511@gmail.com>
+
+Description
+-----------
+
+The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
+buck converter. The MPQ8785 offers a very compact solution that achieves up to
+40A output current per phase, with excellent load and line regulation over a
+wide input supply range. The MPQ8785 operates at high efficiency over a wide
+output current load range.
+
+The PMBus interface provides converter configurations and key parameters
+monitoring.
+
+The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+control, which provides fast transient response and eases loop stabilization.
+The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
+with excellent current sharing and phase interleaving for high-current
+applications.
+
+Fully integrated protection features include over-current protection (OCP),
+over-voltage protection (OVP), under-voltage protection (UVP), and
+over-temperature protection (OTP).
+
+The MPQ8785 requires a minimal number of readily available, standard external
+components, and is available in a TLGA (5mmx6mm) package.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git linux-libre-6.8-gnu/Documentation/hwmon/nct6683.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/nct6683.rst
index 3e7f6ee779c2..2a7a78eb1b46 100644
--- linux-libre-6.8-gnu/Documentation/hwmon/nct6683.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/nct6683.rst
@@ -64,4 +64,5 @@ Intel DB85FL	NCT6683D EC firmware version 1.0 build 04/03/13
 ASRock X570	NCT6683D EC firmware version 1.0 build 06/28/19
 ASRock X670E	NCT6686D EC firmware version 1.0 build 05/19/22
 MSI B550	NCT6687D EC firmware version 1.0 build 05/07/20
+MSI X670-P	NCT6687D EC firmware version 0.0 build 09/27/22
 =============== ===============================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/nzxt-kraken3.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/nzxt-kraken3.rst
new file mode 100644
index 000000000000..90fd9dec15ff
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/nzxt-kraken3.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken3
+==========================
+
+Supported devices:
+
+* NZXT Kraken X53
+* NZXT Kraken X63
+* NZXT Kraken X73
+* NZXT Kraken Z53
+* NZXT Kraken Z63
+* NZXT Kraken Z73
+
+Author: Jonas Malaco, Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and
+Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature
+and pump speed (in RPM), as well as PWM control (either as a fixed value
+or through a temp-PWM curve). The Z-series models additionally expose the speed
+and duty of an optionally connected fan, with the same PWM control capabilities.
+
+Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is
+for the manual control mode and 2 is for the liquid temp to PWM curve mode.
+Writing a 0 disables control of the channel through the driver after setting its
+duty to 100%.
+
+The temperature of the curves relates to the fixed [20-59] range, correlating to
+the detected liquid temperature. Only PWM values (ranging from 0-255) can be set.
+If in curve mode, setting point values should be done in moderation - the devices
+require complete curves to be sent for each change; they can lock up or discard
+the changes if they are too numerous at once. Suggestion is to set them while
+in an another mode, and then apply them by switching to curve.
+
+The devices can report if they are faulty. The driver supports that situation
+and will issue a warning. This can also happen when the USB cable is connected,
+but SATA power is not.
+
+The addressable RGB LEDs and LCD screen (only on Z-series models) are not
+supported in this driver, but can be controlled through existing userspace tools,
+such as `liquidctl`_.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Possible pwm_enable values are:
+
+====== ==========================================================================
+0      Set fan to 100%
+1      Direct PWM mode (applies value in corresponding PWM entry)
+2      Curve control mode (applies the temp-PWM duty curve based on coolant temp)
+====== ==========================================================================
+
+Sysfs entries
+-------------
+
+============================== ================================================================
+fan1_input                     Pump speed (in rpm)
+fan2_input                     Fan speed (in rpm)
+temp1_input                    Coolant temperature (in millidegrees Celsius)
+pwm1                           Pump duty (value between 0-255)
+pwm1_enable                    Pump duty control mode (0: disabled, 1: manual, 2: curve)
+pwm2                           Fan duty (value between 0-255)
+pwm2_enable                    Fan duty control mode (0: disabled, 1: manual, 2: curve)
+temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp
+============================== ================================================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/oxp-sensors.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/oxp-sensors.rst
index 3adeb7406243..55b1ef61625e 100644
--- linux-libre-6.8-gnu/Documentation/hwmon/oxp-sensors.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/oxp-sensors.rst
@@ -33,6 +33,7 @@ Currently the driver supports the following handhelds:
  - AOK ZOE A1 PRO
  - Aya Neo 2
  - Aya Neo AIR
+ - Aya Neo AIR Plus (Mendocino)
  - Aya Neo AIR Pro
  - Aya Neo Geek
  - OneXPlayer AMD
diff --git linux-libre-6.8-gnu/Documentation/hwmon/pt5161l.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/pt5161l.rst
new file mode 100644
index 000000000000..1b97336991ea
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/pt5161l.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver pt5161l
+=====================
+
+Supported chips:
+
+  * Astera Labs PT5161L
+
+    Prefix: 'pt5161l'
+
+    Addresses scanned: I2C 0x20 - 0x27
+
+    Datasheet: Not publicly available.
+
+Authors: Cosmo Chou <cosmo.chou@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for temperature monitoring of Astera Labs
+PT5161L series PCIe retimer chips.
+
+This driver implementation originates from the CSDK available at
+https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14
+The communication protocol utilized is based on the I2C/SMBus standard.
+
+Sysfs entries
+----------------
+
+================ ==============================================
+temp1_input      Measured temperature (in millidegrees Celsius)
+================ ==============================================
+
+Debugfs entries
+----------------
+
+================ ===============================
+fw_load_status   Firmware load status
+fw_ver           Firmware version of the retimer
+heartbeat_status Heartbeat status
+================ ===============================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/sht3x.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/sht3x.rst
index 957c854f5d08..9585fa7c5a5d 100644
--- linux-libre-6.8-gnu/Documentation/hwmon/sht3x.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/sht3x.rst
@@ -65,6 +65,10 @@ When the temperature and humidity readings move back between the hysteresis
 values, the alert bit is set to 0 and the alert pin on the sensor is set to
 low.
 
+The serial number exposed to debugfs allows for unique identification of the
+sensors. For sts32, sts33 and sht33, the manufacturer provides calibration
+certificates through an API.
+
 sysfs-Interface
 ---------------
 
@@ -99,3 +103,10 @@ repeatability:      write or read repeatability, higher repeatability means
                         - 1: medium repeatability
                         - 2: high repeatability
 =================== ============================================================
+
+debugfs-Interface
+-----------------
+
+=================== ============================================================
+serial_number:      unique serial number of the sensor in decimal
+=================== ============================================================
diff --git linux-libre-6.8-gnu/Documentation/hwmon/surface_fan.rst linux-libre-6.9-rc6-gnu/Documentation/hwmon/surface_fan.rst
new file mode 100644
index 000000000000..07942574c4f0
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/hwmon/surface_fan.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver surface_fan
+=========================
+
+Supported Devices:
+
+  * Microsoft Surface Pro 9
+
+Author: Ivor Wanders <ivor@iwanders.net>
+
+Description
+-----------
+
+This provides monitoring of the fan found in some Microsoft Surface Pro devices,
+like the Surface Pro 9. The fan is always controlled by the onboard controller.
+
+Sysfs interface
+---------------
+
+======================= ======= =========================================
+Name                    Perm    Description
+======================= ======= =========================================
+``fan1_input``          RO      Current fan speed in RPM.
+======================= ======= =========================================
diff --git linux-libre-6.8-gnu/Documentation/i2c/writing-clients.rst linux-libre-6.9-rc6-gnu/Documentation/i2c/writing-clients.rst
index 41ddc10f1ac7..0b8439ea954c 100644
--- linux-libre-6.8-gnu/Documentation/i2c/writing-clients.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/i2c/writing-clients.rst
@@ -48,10 +48,6 @@ driver model device node, and its I2C address.
 	.id_table	= foo_idtable,
 	.probe		= foo_probe,
 	.remove		= foo_remove,
-	/* if device autodetection is needed: */
-	.class		= I2C_CLASS_SOMETHING,
-	.detect		= foo_detect,
-	.address_list	= normal_i2c,
 
 	.shutdown	= foo_shutdown,	/* optional */
 	.command	= foo_command,	/* optional, deprecated */
@@ -203,27 +199,8 @@ reference for later use.
 Device Detection
 ----------------
 
-Sometimes you do not know in advance which I2C devices are connected to
-a given I2C bus.  This is for example the case of hardware monitoring
-devices on a PC's SMBus.  In that case, you may want to let your driver
-detect supported devices automatically.  This is how the legacy model
-was working, and is now available as an extension to the standard
-driver model.
-
-You simply have to define a detect callback which will attempt to
-identify supported devices (returning 0 for supported ones and -ENODEV
-for unsupported ones), a list of addresses to probe, and a device type
-(or class) so that only I2C buses which may have that type of device
-connected (and not otherwise enumerated) will be probed.  For example,
-a driver for a hardware monitoring chip for which auto-detection is
-needed would set its class to I2C_CLASS_HWMON, and only I2C adapters
-with a class including I2C_CLASS_HWMON would be probed by this driver.
-Note that the absence of matching classes does not prevent the use of
-a device of that type on the given I2C adapter.  All it prevents is
-auto-detection; explicit instantiation of devices is still possible.
-
-Note that this mechanism is purely optional and not suitable for all
-devices.  You need some reliable way to identify the supported devices
+The device detection mechanism comes with a number of disadvantages.
+You need some reliable way to identify the supported devices
 (typically using device-specific, dedicated identification registers),
 otherwise misdetections are likely to occur and things can get wrong
 quickly.  Keep in mind that the I2C protocol doesn't include any
@@ -231,9 +208,8 @@ standard way to detect the presence of a chip at a given address, let
 alone a standard way to identify devices.  Even worse is the lack of
 semantics associated to bus transfers, which means that the same
 transfer can be seen as a read operation by a chip and as a write
-operation by another chip.  For these reasons, explicit device
-instantiation should always be preferred to auto-detection where
-possible.
+operation by another chip.  For these reasons, device detection is
+considered a legacy mechanism and shouldn't be used in new code.
 
 
 Device Deletion
diff --git linux-libre-6.8-gnu/Documentation/iio/adis16475.rst linux-libre-6.9-rc6-gnu/Documentation/iio/adis16475.rst
new file mode 100644
index 000000000000..91cabb7d8d05
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/iio/adis16475.rst
@@ -0,0 +1,407 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+ADIS16475 driver
+================
+
+This driver supports Analog Device's IMUs on SPI bus.
+
+1. Supported devices
+====================
+
+* `ADIS16465 <https://www.analog.com/ADIS16465>`_
+* `ADIS16467 <https://www.analog.com/ADIS16467>`_
+* `ADIS16470 <https://www.analog.com/ADIS16470>`_
+* `ADIS16475 <https://www.analog.com/ADIS16475>`_
+* `ADIS16477 <https://www.analog.com/ADIS16477>`_
+* `ADIS16500 <https://www.analog.com/ADIS16500>`_
+* `ADIS16505 <https://www.analog.com/ADIS16505>`_
+* `ADIS16507 <https://www.analog.com/ADIS16507>`_
+
+Each supported device is a precision, miniature microelectromechanical system
+(MEMS) inertial measurement unit (IMU) that includes a triaxial gyroscope and a
+triaxial accelerometer. Each inertial sensor in the IMU device combines with
+signal conditioning that optimizes dynamic performance. The factory calibration
+characterizes each sensor for sensitivity, bias, alignment, linear acceleration
+(gyroscope bias), and point of percussion (accelerometer location). As a result,
+each sensor has dynamic compensation formulas that provide accurate sensor
+measurements over a broad set of conditions.
+
+2. Device attributes
+====================
+
+Accelerometer, gyroscope measurements are always provided. Furthermore, the
+driver offers the capability to retrieve the delta angle and the delta velocity
+measurements computed by the device.
+
+The delta angle measurements represent a calculation of angular displacement
+between each sample update, while the delta velocity measurements represent a
+calculation of linear velocity change between each sample update.
+
+Finally, temperature data are provided which show a coarse measurement of
+the temperature inside of the IMU device. This data is most useful for
+monitoring relative changes in the thermal environment.
+
+The signal chain of each inertial sensor (accelerometers and gyroscopes)
+includes the application of unique correction formulas, which are derived from
+extensive characterization of bias, sensitivity, alignment, response to linear
+acceleration (gyroscopes), and point of percussion (accelerometer location)
+over a temperature range of −40°C to +85°C, for each ADIS device. These
+correction formulas are not accessible, but users do have the opportunity to
+adjust the bias for each sensor individually through the calibbias attribute.
+
+Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``,
+where X is the IIO index of the device. Under these folders reside a set of
+device files, depending on the characteristics and features of the hardware
+device in questions. These files are consistently generalized and documented in
+the IIO ABI documentation.
+
+The following tables show the adis16475 related device files, found in the
+specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
+
++-------------------------------------------+----------------------------------------------------------+
+| 3-Axis Accelerometer related device files | Description                                              |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_scale                            | Scale for the accelerometer channels.                    |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_x_calibbias                      | Calibration offset for the X-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_calibbias_x                      | x-axis acceleration offset correction                    |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_x_raw                            | Raw X-axis accelerometer channel value.                  |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_calibbias_y                      | y-axis acceleration offset correction                    |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_y_raw                            | Raw Y-axis accelerometer channel value.                  |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_z_calibbias                      | Calibration offset for the Z-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_z_raw                            | Raw Z-axis accelerometer channel value.                  |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_scale                    | Scale for delta velocity channels.                       |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_x_raw                    | Raw X-axis delta velocity channel value.                 |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_y_raw                    | Raw Y-axis delta velocity channel value.                 |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_z_raw                    | Raw Z-axis delta velocity channel value.                 |
++-------------------------------------------+----------------------------------------------------------+
+
++---------------------------------------+------------------------------------------------------+
+| 3-Axis Gyroscope related device files | Description                                          |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_scale                      | Scale for the gyroscope channels.                    |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_x_calibbias                | Calibration offset for the X-axis gyroscope channel. |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_calibbias_x                | x-axis gyroscope offset correction                   |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_x_raw                      | Raw X-axis gyroscope channel value.                  |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_calibbias_y                | y-axis gyroscope offset correction                   |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_y_raw                      | Raw Y-axis gyroscope channel value.                  |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_z_calibbias                | Calibration offset for the Z-axis gyroscope channel. |
++---------------------------------------+------------------------------------------------------+
+| in_anglvel_z_raw                      | Raw Z-axis gyroscope channel value.                  |
++---------------------------------------+------------------------------------------------------+
+| in_deltaangl_scale                    | Scale for delta angle channels.                      |
++---------------------------------------+------------------------------------------------------+
+| in_deltaangl_x_raw                    | Raw X-axis delta angle channel value.                |
++---------------------------------------+------------------------------------------------------+
+| in_deltaangl_y_raw                    | Raw Y-axis delta angle channel value.                |
++---------------------------------------+------------------------------------------------------+
+| in_deltaangl_z_raw                    | Raw Z-axis delta angle channel value.                |
++---------------------------------------+------------------------------------------------------+
+
++----------------------------------+-------------------------------------------+
+| Temperature sensor related files | Description                               |
++----------------------------------+-------------------------------------------+
+| in_temp0_raw                     | Raw temperature channel value.            |
++----------------------------------+-------------------------------------------+
+| in_temp0_scale                   | Scale for the temperature sensor channel. |
++----------------------------------+-------------------------------------------+
+
++-------------------------------+---------------------------------------------------------+
+| Miscellaneous device files    | Description                                             |
++-------------------------------+---------------------------------------------------------+
+| name                          | Name of the IIO device.                                 |
++-------------------------------+---------------------------------------------------------+
+| sampling_frequency            | Currently selected sample rate.                         |
++-------------------------------+---------------------------------------------------------+
+| filter_low_pass_3db_frequency | Bandwidth for the accelerometer and gyroscope channels. |
++-------------------------------+---------------------------------------------------------+
+
+The following table shows the adis16475 related device debug files, found in the
+specific device debug folder path ``/sys/kernel/debug/iio/iio:deviceX``.
+
++----------------------+-------------------------------------------------------------------------+
+| Debugfs device files | Description                                                             |
++----------------------+-------------------------------------------------------------------------+
+| serial_number        | The serial number of the chip in hexadecimal format.                    |
++----------------------+-------------------------------------------------------------------------+
+| product_id           | Chip specific product id (e.g. 16475, 16500, 16505, etc.).              |
++----------------------+-------------------------------------------------------------------------+
+| flash_count          | The number of flash writes performed on the device.                     |
++----------------------+-------------------------------------------------------------------------+
+| firmware_revision    | String containing the firmware revision in the following format ##.##.  |
++----------------------+-------------------------------------------------------------------------+
+| firmware_date        | String containing the firmware date in the following format mm-dd-yyyy. |
++----------------------+-------------------------------------------------------------------------+
+
+Channels processed values
+-------------------------
+
+A channel value can be read from its _raw attribute. The value returned is the
+raw value as reported by the devices. To get the processed value of the channel,
+apply the following formula:
+
+.. code-block:: bash
+
+        processed value = (_raw + _offset) * _scale
+
+Where _offset and _scale are device attributes. If no _offset attribute is
+present, simply assume its value is 0.
+
+The adis16475 driver offers data for 5 types of channels, the table below shows
+the measurement units for the processed value, which are defined by the IIO
+framework:
+
++-------------------------------------+---------------------------+
+| Channel type                        | Measurement unit          |
++-------------------------------------+---------------------------+
+| Acceleration on X, Y, and Z axis    | Meters per Second squared |
++-------------------------------------+---------------------------+
+| Angular velocity on X, Y and Z axis | Radians per second        |
++-------------------------------------+---------------------------+
+| Delta velocity on X. Y, and Z axis  | Meters per Second         |
++-------------------------------------+---------------------------+
+| Delta angle on X, Y, and Z axis     | Radians                   |
++-------------------------------------+---------------------------+
+| Temperature                         | Millidegrees Celsius      |
++-------------------------------------+---------------------------+
+
+Usage examples
+--------------
+
+Show device name:
+
+.. code-block:: bash
+
+	root:/sys/bus/iio/devices/iio:device0> cat name
+        adis16505-2
+
+Show accelerometer channels value:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw
+        -275924
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw
+        -30142222
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw
+        261265769
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale
+        0.000000037
+
+- X-axis acceleration = in_accel_x_raw * in_accel_scale = −0.010209188 m/s^2
+- Y-axis acceleration = in_accel_y_raw * in_accel_scale = −1.115262214 m/s^2
+- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 9.666833453 m/s^2
+
+Show gyroscope channels value:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_x_raw
+        -3324626
+        root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_raw
+        1336980
+        root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_z_raw
+        -602983
+        root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_scale
+        0.000000006
+
+- X-axis angular velocity = in_anglvel_x_raw * in_anglvel_scale = −0.019947756 rad/s
+- Y-axis angular velocity = in_anglvel_y_raw * in_anglvel_scale = 0.00802188 rad/s
+- Z-axis angular velocity = in_anglvel_z_raw * in_anglvel_scale = −0.003617898 rad/s
+
+Set calibration offset for accelerometer channels:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+        0
+
+        root:/sys/bus/iio/devices/iio:device0> echo 5000 > in_accel_x_calibbias
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+        5000
+
+Set calibration offset for gyroscope channels:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias
+        0
+
+        root:/sys/bus/iio/devices/iio:device0> echo -5000 > in_anglvel_y_calibbias
+        root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias
+        -5000
+
+Set sampling frequency:
+
+.. code-block:: bash
+
+	root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency
+        2000.000000
+
+        root:/sys/bus/iio/devices/iio:device0> echo 1000 > sampling_frequency
+        1000.000000
+
+Set bandwidth for accelerometer and gyroscope:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat filter_low_pass_3db_frequency
+        720
+
+        root:/sys/bus/iio/devices/iio:device0> echo 360 > filter_low_pass_3db_frequency
+        root:/sys/bus/iio/devices/iio:device0> cat filter_low_pass_3db_frequency
+        360
+
+Show serial number:
+
+.. code-block:: bash
+
+        root:/sys/kernel/debug/iio/iio:device0> cat serial_number
+        0x04f9
+
+Show product id:
+
+.. code-block:: bash
+
+        root:/sys/kernel/debug/iio/iio:device0> cat product_id
+        16505
+
+Show flash count:
+
+.. code-block:: bash
+
+        root:/sys/kernel/debug/iio/iio:device0> cat flash_count
+        150
+
+Show firmware revision:
+
+.. code-block:: bash
+
+        root:/sys/kernel/debug/iio/iio:device0> cat firmware_revision
+        1.6
+
+Show firmware date:
+
+.. code-block:: bash
+
+        root:/sys/kernel/debug/iio/iio:device0> cat firmware_date
+        06-27-2019
+
+3. Device buffers
+=================
+
+This driver supports IIO buffers.
+
+All devices support retrieving the raw acceleration, gyroscope and temperature
+measurements using buffers.
+
+The following device families also support retrieving the delta velocity, delta
+angle and temperature measurements using buffers:
+
+- ADIS16477
+- ADIS16500
+- ADIS16505
+- ADIS16507
+
+However, when retrieving acceleration or gyroscope data using buffers, delta
+readings will not be available and vice versa.
+
+Usage examples
+--------------
+
+Set device trigger in current_trigger, if not already set:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger
+
+        root:/sys/bus/iio/devices/iio:device0> echo adis16505-2-dev0 > trigger/current_trigger
+        root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger
+        adis16505-2-dev0
+
+Select channels for buffer read:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_x_en
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_y_en
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_z_en
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp0_en
+
+Set the number of samples to be stored in the buffer:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length
+
+Enable buffer readings:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable
+
+Obtain buffered data:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0
+        ...
+        00001680  01 1f 00 00 ff ff fe ef  00 00 47 bf 00 03 35 55  |..........G...5U|
+        00001690  01 1f 00 00 ff ff ff d9  00 00 46 f1 00 03 35 35  |..........F...55|
+        000016a0  01 1f 00 00 ff ff fe fc  00 00 46 cb 00 03 35 7b  |..........F...5{|
+        000016b0  01 1f 00 00 ff ff fe 41  00 00 47 0d 00 03 35 8b  |.......A..G...5.|
+        000016c0  01 1f 00 00 ff ff fe 37  00 00 46 b4 00 03 35 90  |.......7..F...5.|
+        000016d0  01 1d 00 00 ff ff fe 5a  00 00 45 d7 00 03 36 08  |.......Z..E...6.|
+        000016e0  01 1b 00 00 ff ff fe fb  00 00 45 e7 00 03 36 60  |..........E...6`|
+        000016f0  01 1a 00 00 ff ff ff 17  00 00 46 bc 00 03 36 de  |..........F...6.|
+        00001700  01 1a 00 00 ff ff fe 59  00 00 46 d7 00 03 37 b8  |.......Y..F...7.|
+        00001710  01 1a 00 00 ff ff fe ae  00 00 46 95 00 03 37 ba  |..........F...7.|
+        00001720  01 1a 00 00 ff ff fe c5  00 00 46 63 00 03 37 9f  |..........Fc..7.|
+        00001730  01 1a 00 00 ff ff fe 55  00 00 46 89 00 03 37 c1  |.......U..F...7.|
+        00001740  01 1a 00 00 ff ff fe 31  00 00 46 aa 00 03 37 f7  |.......1..F...7.|
+        ...
+
+See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered
+data is structured.
+
+4. IIO Interfacing Tools
+========================
+
+Linux Kernel Tools
+------------------
+
+Linux Kernel provides some userspace tools that can be used to retrieve data
+from IIO sysfs:
+
+* lsiio: example application that provides a list of IIO devices and triggers
+* iio_event_monitor: example application that reads events from an IIO device
+  and prints them
+* iio_generic_buffer: example application that reads data from buffer
+* iio_utils: set of APIs, typically used to access sysfs files.
+
+LibIIO
+------
+
+LibIIO is a C/C++ library that provides generic access to IIO devices. The
+library abstracts the low-level details of the hardware, and provides a simple
+yet complete programming interface that can be used for advanced projects.
+
+For more information about LibIIO, please see:
+https://github.com/analogdevicesinc/libiio
diff --git linux-libre-6.8-gnu/Documentation/iio/iio_devbuf.rst linux-libre-6.9-rc6-gnu/Documentation/iio/iio_devbuf.rst
new file mode 100644
index 000000000000..9919e4792d0e
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/iio/iio_devbuf.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Industrial IIO device buffers
+=============================
+
+1. Overview
+===========
+
+The Industrial I/O core offers a way for continuous data capture based on a
+trigger source. Multiple data channels can be read at once from
+``/dev/iio:deviceX`` character device node, thus reducing the CPU load.
+
+Devices with buffer support feature an additional sub-directory in the
+``/sys/bus/iio/devices/iio:deviceX/`` directory hierarchy, called bufferY, where
+Y defaults to 0, for devices with a single buffer.
+
+2. Buffer attributes
+====================
+
+An IIO buffer has an associated attributes directory under
+``/sys/bus/iio/iio:deviceX/bufferY/``. The attributes are described below.
+
+``length``
+----------
+
+Read / Write attribute which states the total number of data samples (capacity)
+that can be stored by the buffer.
+
+``enable``
+----------
+
+Read / Write attribute which starts / stops the buffer capture. This file should
+be written last, after length and selection of scan elements. Writing a non-zero
+value may result in an error, such as EINVAL, if, for example, an unsupported
+combination of channels is given.
+
+``watermark``
+-------------
+
+Read / Write positive integer attribute specifying the maximum number of scan
+elements to wait for.
+
+Poll will block until the watermark is reached.
+
+Blocking read will wait until the minimum between the requested read amount or
+the low watermark is available.
+
+Non-blocking read will retrieve the available samples from the buffer even if
+there are less samples than the watermark level. This allows the application to
+block on poll with a timeout and read the available samples after the timeout
+expires and thus have a maximum delay guarantee.
+
+Data available
+--------------
+
+Read-only attribute indicating the bytes of data available in the buffer. In the
+case of an output buffer, this indicates the amount of empty space available to
+write data to. In the case of an input buffer, this indicates the amount of data
+available for reading.
+
+Scan elements
+-------------
+
+The meta information associated with a channel data placed in a buffer is called
+a scan element. The scan elements attributes are presented below.
+
+**_en**
+
+Read / Write attribute used for enabling a channel. If and only if its value
+is non-zero, then a triggered capture will contain data samples for this
+channel.
+
+**_index**
+
+Read-only unsigned integer attribute specifying the position of the channel in
+the buffer. Note these are not dependent on what is enabled and may not be
+contiguous. Thus for userspace to establish the full layout these must be used
+in conjunction with all _en attributes to establish which channels are present,
+and the relevant _type attributes to establish the data storage format.
+
+**_type**
+
+Read-only attribute containing the description of the scan element data storage
+within the buffer and hence the form in which it is read from userspace. Format
+is [be|le]:[s|u]bits/storagebits[Xrepeat][>>shift], where:
+
+- **be** or **le** specifies big or little-endian.
+- **s** or **u** specifies if signed (2's complement) or unsigned.
+- **bits** is the number of valid data bits.
+- **storagebits** is the number of bits (after padding) that it occupies in the
+  buffer.
+- **repeat** specifies the number of bits/storagebits repetitions. When the
+  repeat element is 0 or 1, then the repeat value is omitted.
+- **shift** if specified, is the shift that needs to be applied prior to
+  masking out unused bits.
+
+For example, a driver for a 3-axis accelerometer with 12-bit resolution where
+data is stored in two 8-bit registers is as follows::
+
+          7   6   5   4   3   2   1   0
+        +---+---+---+---+---+---+---+---+
+        |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06)
+        +---+---+---+---+---+---+---+---+
+
+          7   6   5   4   3   2   1   0
+        +---+---+---+---+---+---+---+---+
+        |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07)
+        +---+---+---+---+---+---+---+---+
+
+will have the following scan element type for each axis:
+
+.. code-block:: bash
+
+        $ cat /sys/bus/iio/devices/iio:device0/buffer0/in_accel_y_type
+        le:s12/16>>4
+
+A userspace application will interpret data samples read from the buffer as
+two-byte little-endian signed data, that needs a 4 bits right shift before
+masking out the 12 valid bits of data.
+
+It is also worth mentioning that the data in the buffer will be naturally
+aligned, so the userspace application has to handle the buffers accordingly.
+
+Take for example, a driver with four channels with the following description:
+- channel0: index: 0, type: be:u16/16>>0
+- channel1: index: 1, type: be:u32/32>>0
+- channel2: index: 2, type: be:u32/32>>0
+- channel3: index: 3, type: be:u64/64>>0
+
+If all channels are enabled, the data will be aligned in the buffer as follows::
+
+          0-1   2   3   4-7  8-11  12  13  14  15  16-23   -> buffer byte number
+        +-----+---+---+-----+-----+---+---+---+---+-----+
+        |CHN_0|PAD|PAD|CHN_1|CHN_2|PAD|PAD|PAD|PAD|CHN_3|  -> buffer content
+        +-----+---+---+-----+-----+---+---+---+---+-----+
+
+If only channel0 and channel3 are enabled, the data will be aligned in the
+buffer as follows::
+
+          0-1   2   3   4   5   6   7  8-15    -> buffer byte number
+        +-----+---+---+---+---+---+---+-----+
+        |CHN_0|PAD|PAD|PAD|PAD|PAD|PAD|CHN_3|  -> buffer content
+        +-----+---+---+---+---+---+---+-----+
+
+Typically the buffered data is found in raw format (unscaled with no offset
+applied), however there are corner cases in which the buffered data may be found
+in a processed form. Please note that these corner cases are not addressed by
+this documentation.
+
+Please see ``Documentation/ABI/testing/sysfs-bus-iio`` for a complete
+description of the attributes.
diff --git linux-libre-6.8-gnu/Documentation/iio/index.rst linux-libre-6.9-rc6-gnu/Documentation/iio/index.rst
index 1b7292c58cd0..30b09eefe75e 100644
--- linux-libre-6.8-gnu/Documentation/iio/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/iio/index.rst
@@ -8,7 +8,14 @@ Industrial I/O
    :maxdepth: 1
 
    iio_configfs
+   iio_devbuf
 
-   ep93xx_adc
+Industrial I/O Kernel Drivers
+=============================
 
+.. toctree::
+   :maxdepth: 1
+
+   adis16475
    bno055
+   ep93xx_adc
diff --git linux-libre-6.8-gnu/Documentation/index.rst linux-libre-6.9-rc6-gnu/Documentation/index.rst
index 36e61783437c..5298611e00ee 100644
--- linux-libre-6.8-gnu/Documentation/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/index.rst
@@ -22,10 +22,10 @@ community and getting your work upstream.
 .. toctree::
    :maxdepth: 1
 
-   process/development-process
-   process/submitting-patches
+   Development process <process/development-process>
+   Submitting patches <process/submitting-patches>
    Code of conduct <process/code-of-conduct>
-   maintainer/index
+   Maintainer handbook <maintainer/index>
    All development-process docs <process/index>
 
 
@@ -38,10 +38,10 @@ kernel.
 .. toctree::
    :maxdepth: 1
 
-   core-api/index
-   driver-api/index
-   subsystem-apis
-   Locking in the kernel <locking/index>
+   Core API <core-api/index>
+   Driver APIs <driver-api/index>
+   Subsystems <subsystem-apis>
+   Locking <locking/index>
 
 Development tools and processes
 ===============================
@@ -51,15 +51,15 @@ Various other manuals with useful information for all kernel developers.
 .. toctree::
    :maxdepth: 1
 
-   process/license-rules
-   doc-guide/index
-   dev-tools/index
-   dev-tools/testing-overview
-   kernel-hacking/index
-   trace/index
-   fault-injection/index
-   livepatch/index
-   rust/index
+   Licensing rules <process/license-rules>
+   Writing documentation <doc-guide/index>
+   Development tools <dev-tools/index>
+   Testing guide <dev-tools/testing-overview>
+   Hacking guide <kernel-hacking/index>
+   Tracing <trace/index>
+   Fault injection <fault-injection/index>
+   Livepatching <livepatch/index>
+   Rust <rust/index>
 
 
 User-oriented documentation
@@ -72,11 +72,11 @@ developers seeking information on the kernel's user-space APIs.
 .. toctree::
    :maxdepth: 1
 
-   admin-guide/index
-   The kernel build system <kbuild/index>
-   admin-guide/reporting-issues.rst
-   User-space tools <tools/index>
-   userspace-api/index
+   Administration <admin-guide/index>
+   Build system <kbuild/index>
+   Reporting issues <admin-guide/reporting-issues.rst>
+   Userspace tools <tools/index>
+   Userspace API <userspace-api/index>
 
 See also: the `Linux man pages <https://www.kernel.org/doc/man-pages/>`_,
 which are kept separately from the kernel's own documentation.
@@ -89,8 +89,8 @@ platform firmwares.
 .. toctree::
    :maxdepth: 1
 
-   firmware-guide/index
-   devicetree/index
+   Firmware <firmware-guide/index>
+   Firmware and Devicetree <devicetree/index>
 
 
 Architecture-specific documentation
@@ -99,7 +99,7 @@ Architecture-specific documentation
 .. toctree::
    :maxdepth: 2
 
-   arch/index
+   CPU architectures <arch/index>
 
 
 Other documentation
@@ -112,8 +112,7 @@ to ReStructured Text format, or are simply too old.
 .. toctree::
    :maxdepth: 1
 
-   staging/index
-   RAS/ras
+   Unsorted documentation <staging/index>
 
 
 Translations
@@ -122,7 +121,7 @@ Translations
 .. toctree::
    :maxdepth: 2
 
-   translations/index
+   Translations <translations/index>
 
 Indices and tables
 ==================
diff --git linux-libre-6.8-gnu/Documentation/kbuild/kconfig-language.rst linux-libre-6.9-rc6-gnu/Documentation/kbuild/kconfig-language.rst
index 0135905c0aa3..79ac2e8184f6 100644
--- linux-libre-6.8-gnu/Documentation/kbuild/kconfig-language.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/kbuild/kconfig-language.rst
@@ -393,7 +393,7 @@ of C0, which doesn't depend on M::
 
 choices::
 
-	"choice" [symbol]
+	"choice"
 	<choice options>
 	<choice block>
 	"endchoice"
@@ -412,10 +412,6 @@ the kernel, but all drivers can be compiled as modules.
 
 A choice accepts another option "optional", which allows to set the
 choice to 'n' and no entry needs to be selected.
-If no [symbol] is associated with a choice, then you can not have multiple
-definitions of that choice. If a [symbol] is associated to the choice,
-then you may define the same choice (i.e. with the same entries) in another
-place.
 
 comment::
 
diff --git linux-libre-6.8-gnu/Documentation/kbuild/kconfig.rst linux-libre-6.9-rc6-gnu/Documentation/kbuild/kconfig.rst
index c946eb44bd13..fc4e845bc249 100644
--- linux-libre-6.8-gnu/Documentation/kbuild/kconfig.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/kbuild/kconfig.rst
@@ -1,10 +1,10 @@
-===================
-Kconfig make config
-===================
+=================================
+Configuration targets and editors
+=================================
 
-This file contains some assistance for using `make *config`.
+This file contains some assistance for using ``make *config``.
 
-Use "make help" to list all of the possible configuration targets.
+Use ``make help`` to list all of the possible configuration targets.
 
 The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf')
 programs also have embedded help text.  Be sure to check that for
@@ -12,8 +12,9 @@ navigation, search, and other general help text.
 
 The gconfig ('gconf') program has limited help text.
 
+
 General
--------
+=======
 
 New kernel releases often introduce new config symbols.  Often more
 important, new kernel releases may rename config symbols.  When
@@ -24,118 +25,102 @@ symbols have been introduced.
 
 To see a list of new config symbols, use::
 
-	cp user/some/old.config .config
-	make listnewconfig
+    cp user/some/old.config .config
+    make listnewconfig
 
 and the config program will list any new symbols, one per line.
 
 Alternatively, you can use the brute force method::
 
-	make oldconfig
-	scripts/diffconfig .config.old .config | less
-
-----------------------------------------------------------------------
-
-Environment variables for `*config`
+    make oldconfig
+    scripts/diffconfig .config.old .config | less
 
-KCONFIG_CONFIG
---------------
-This environment variable can be used to specify a default kernel config
-file name to override the default name of ".config".
 
-KCONFIG_DEFCONFIG_LIST
-----------------------
+Environment variables
+=====================
 
-This environment variable specifies a list of config files which can be used
-as a base configuration in case the .config does not exist yet. Entries in
-the list are separated with whitespaces to each other, and the first one
-that exists is used.
+Environment variables for ``*config``:
 
-KCONFIG_OVERWRITECONFIG
------------------------
-If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
-break symlinks when .config is a symlink to somewhere else.
+``KCONFIG_CONFIG``
+    This environment variable can be used to specify a default kernel config
+    file name to override the default name of ".config".
 
-KCONFIG_WARN_UNKNOWN_SYMBOLS
-----------------------------
-This environment variable makes Kconfig warn about all unrecognized
-symbols in the config input.
+``KCONFIG_DEFCONFIG_LIST``
+    This environment variable specifies a list of config files which can be
+    used as a base configuration in case the .config does not exist yet.
+    Entries in the list are separated with whitespaces to each other, and
+    the first one that exists is used.
 
-KCONFIG_WERROR
---------------
-If set, Kconfig treats warnings as errors.
+``KCONFIG_OVERWRITECONFIG``
+    If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
+    break symlinks when .config is a symlink to somewhere else.
 
-`CONFIG_`
----------
-If you set `CONFIG_` in the environment, Kconfig will prefix all symbols
-with its value when saving the configuration, instead of using the default,
-`CONFIG_`.
+``KCONFIG_WARN_UNKNOWN_SYMBOLS``
+    This environment variable makes Kconfig warn about all unrecognized
+    symbols in the config input.
 
-----------------------------------------------------------------------
+``KCONFIG_WERROR``
+    If set, Kconfig treats warnings as errors.
 
-Environment variables for '{allyes/allmod/allno/rand}config'
+``CONFIG_``
+    If you set ``CONFIG_`` in the environment, Kconfig will prefix all symbols
+    with its value when saving the configuration, instead of using the
+    default, ``CONFIG_``.
 
-KCONFIG_ALLCONFIG
------------------
-(partially based on lkml email from/by Rob Landley, re: miniconfig)
+Environment variables for ``{allyes/allmod/allno/rand}config``:
 
---------------------------------------------------
+``KCONFIG_ALLCONFIG``
+    The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also
+    use the environment variable KCONFIG_ALLCONFIG as a flag or a filename
+    that contains config symbols that the user requires to be set to a
+    specific value.  If KCONFIG_ALLCONFIG is used without a filename where
+    KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", ``make *config``
+    checks for a file named "all{yes/mod/no/def/random}.config"
+    (corresponding to the ``*config`` command that was used) for symbol values
+    that are to be forced.  If this file is not found, it checks for a
+    file named "all.config" to contain forced values.
 
-The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also
-use the environment variable KCONFIG_ALLCONFIG as a flag or a filename
-that contains config symbols that the user requires to be set to a
-specific value.  If KCONFIG_ALLCONFIG is used without a filename where
-KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", `make *config`
-checks for a file named "all{yes/mod/no/def/random}.config"
-(corresponding to the `*config` command that was used) for symbol values
-that are to be forced.  If this file is not found, it checks for a
-file named "all.config" to contain forced values.
+    This enables you to create "miniature" config (miniconfig) or custom
+    config files containing just the config symbols that you are interested
+    in.  Then the kernel config system generates the full .config file,
+    including symbols of your miniconfig file.
 
-This enables you to create "miniature" config (miniconfig) or custom
-config files containing just the config symbols that you are interested
-in.  Then the kernel config system generates the full .config file,
-including symbols of your miniconfig file.
-
-This 'KCONFIG_ALLCONFIG' file is a config file which contains
-(usually a subset of all) preset config symbols.  These variable
-settings are still subject to normal dependency checks.
-
-Examples::
+    This ``KCONFIG_ALLCONFIG`` file is a config file which contains
+    (usually a subset of all) preset config symbols.  These variable
+    settings are still subject to normal dependency checks.
 
-	KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig
+    Examples::
 
-or::
+        KCONFIG_ALLCONFIG=custom-notebook.config make allnoconfig
 
-	KCONFIG_ALLCONFIG=mini.config make allnoconfig
+    or::
 
-or::
+        KCONFIG_ALLCONFIG=mini.config make allnoconfig
 
-	make KCONFIG_ALLCONFIG=mini.config allnoconfig
+    or::
 
-These examples will disable most options (allnoconfig) but enable or
-disable the options that are explicitly listed in the specified
-mini-config files.
+        make KCONFIG_ALLCONFIG=mini.config allnoconfig
 
-----------------------------------------------------------------------
+    These examples will disable most options (allnoconfig) but enable or
+    disable the options that are explicitly listed in the specified
+    mini-config files.
 
-Environment variables for 'randconfig'
+Environment variables for ``randconfig``:
 
-KCONFIG_SEED
-------------
-You can set this to the integer value used to seed the RNG, if you want
-to somehow debug the behaviour of the kconfig parser/frontends.
-If not set, the current time will be used.
+``KCONFIG_SEED``
+    You can set this to the integer value used to seed the RNG, if you want
+    to somehow debug the behaviour of the kconfig parser/frontends.
+    If not set, the current time will be used.
 
-KCONFIG_PROBABILITY
--------------------
-This variable can be used to skew the probabilities. This variable can
-be unset or empty, or set to three different formats:
+``KCONFIG_PROBABILITY``
+    This variable can be used to skew the probabilities. This variable can
+    be unset or empty, or set to three different formats:
 
     =======================     ==================  =====================
-	KCONFIG_PROBABILITY     y:n split           y:m:n split
+    KCONFIG_PROBABILITY         y:n split           y:m:n split
     =======================     ==================  =====================
-	unset or empty          50  : 50            33  : 33  : 34
-	N                        N  : 100-N         N/2 : N/2 : 100-N
+    unset or empty              50  : 50            33  : 33  : 34
+    N                            N  : 100-N         N/2 : N/2 : 100-N
     [1] N:M                     N+M : 100-(N+M)      N  :  M  : 100-(N+M)
     [2] N:M:L                    N  : 100-N          M  :  L  : 100-(M+L)
     =======================     ==================  =====================
@@ -149,112 +134,98 @@ that:
 
 Examples::
 
-	KCONFIG_PROBABILITY=10
-		10% of booleans will be set to 'y', 90% to 'n'
-		5% of tristates will be set to 'y', 5% to 'm', 90% to 'n'
-	KCONFIG_PROBABILITY=15:25
-		40% of booleans will be set to 'y', 60% to 'n'
-		15% of tristates will be set to 'y', 25% to 'm', 60% to 'n'
-	KCONFIG_PROBABILITY=10:15:15
-		10% of booleans will be set to 'y', 90% to 'n'
-		15% of tristates will be set to 'y', 15% to 'm', 70% to 'n'
+    KCONFIG_PROBABILITY=10
+        10% of booleans will be set to 'y', 90% to 'n'
+        5% of tristates will be set to 'y', 5% to 'm', 90% to 'n'
+    KCONFIG_PROBABILITY=15:25
+        40% of booleans will be set to 'y', 60% to 'n'
+        15% of tristates will be set to 'y', 25% to 'm', 60% to 'n'
+    KCONFIG_PROBABILITY=10:15:15
+        10% of booleans will be set to 'y', 90% to 'n'
+        15% of tristates will be set to 'y', 15% to 'm', 70% to 'n'
 
-----------------------------------------------------------------------
+Environment variables for ``syncconfig``:
 
-Environment variables for 'syncconfig'
+``KCONFIG_NOSILENTUPDATE``
+    If this variable has a non-blank value, it prevents silent kernel
+    config updates (requires explicit updates).
 
-KCONFIG_NOSILENTUPDATE
-----------------------
-If this variable has a non-blank value, it prevents silent kernel
-config updates (requires explicit updates).
+``KCONFIG_AUTOCONFIG``
+    This environment variable can be set to specify the path & name of the
+    "auto.conf" file.  Its default value is "include/config/auto.conf".
 
-KCONFIG_AUTOCONFIG
-------------------
-This environment variable can be set to specify the path & name of the
-"auto.conf" file.  Its default value is "include/config/auto.conf".
+``KCONFIG_AUTOHEADER``
+    This environment variable can be set to specify the path & name of the
+    "autoconf.h" (header) file.
+    Its default value is "include/generated/autoconf.h".
 
-KCONFIG_AUTOHEADER
-------------------
-This environment variable can be set to specify the path & name of the
-"autoconf.h" (header) file.
-Its default value is "include/generated/autoconf.h".
-
-
-----------------------------------------------------------------------
 
 menuconfig
-----------
-
-SEARCHING for CONFIG symbols
+==========
 
 Searching in menuconfig:
 
-	The Search function searches for kernel configuration symbol
-	names, so you have to know something close to what you are
-	looking for.
+    The Search function searches for kernel configuration symbol
+    names, so you have to know something close to what you are
+    looking for.
 
-	Example::
+    Example::
 
-		/hotplug
-		This lists all config symbols that contain "hotplug",
-		e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.
+        /hotplug
+        This lists all config symbols that contain "hotplug",
+        e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.
 
-	For search help, enter / followed by TAB-TAB (to highlight
-	<Help>) and Enter.  This will tell you that you can also use
-	regular expressions (regexes) in the search string, so if you
-	are not interested in MEMORY_HOTPLUG, you could try::
+    For search help, enter / followed by TAB-TAB (to highlight
+    <Help>) and Enter.  This will tell you that you can also use
+    regular expressions (regexes) in the search string, so if you
+    are not interested in MEMORY_HOTPLUG, you could try::
 
-		/^hotplug
+        /^hotplug
 
-	When searching, symbols are sorted thus:
+    When searching, symbols are sorted thus:
 
-	  - first, exact matches, sorted alphabetically (an exact match
-	    is when the search matches the complete symbol name);
-	  - then, other matches, sorted alphabetically.
+    - first, exact matches, sorted alphabetically (an exact match
+      is when the search matches the complete symbol name);
+    - then, other matches, sorted alphabetically.
 
-	For example: ^ATH.K matches:
+    For example, ^ATH.K matches:
 
-	    ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG
-	    [...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...]
+        ATH5K ATH9K ATH5K_AHB ATH5K_DEBUG [...] ATH6KL ATH6KL_DEBUG
+        [...] ATH9K_AHB ATH9K_BTCOEX_SUPPORT ATH9K_COMMON [...]
 
-	of which only ATH5K and ATH9K match exactly and so are sorted
-	first (and in alphabetical order), then come all other symbols,
-	sorted in alphabetical order.
+    of which only ATH5K and ATH9K match exactly and so are sorted
+    first (and in alphabetical order), then come all other symbols,
+    sorted in alphabetical order.
 
-	In this menu, pressing the key in the (#) prefix will jump
-	directly to that location. You will be returned to the current
-	search results after exiting this new menu.
+    In this menu, pressing the key in the (#) prefix will jump
+    directly to that location. You will be returned to the current
+    search results after exiting this new menu.
 
-----------------------------------------------------------------------
+User interface options for 'menuconfig':
 
-User interface options for 'menuconfig'
+``MENUCONFIG_COLOR``
+    It is possible to select different color themes using the variable
+    MENUCONFIG_COLOR.  To select a theme use::
 
-MENUCONFIG_COLOR
-----------------
-It is possible to select different color themes using the variable
-MENUCONFIG_COLOR.  To select a theme use::
+        make MENUCONFIG_COLOR=<theme> menuconfig
 
-	make MENUCONFIG_COLOR=<theme> menuconfig
+    Available themes are::
 
-Available themes are::
+      - mono       => selects colors suitable for monochrome displays
+      - blackbg    => selects a color scheme with black background
+      - classic    => theme with blue background. The classic look
+      - bluetitle  => a LCD friendly version of classic. (default)
 
-  - mono       => selects colors suitable for monochrome displays
-  - blackbg    => selects a color scheme with black background
-  - classic    => theme with blue background. The classic look
-  - bluetitle  => a LCD friendly version of classic. (default)
+``MENUCONFIG_MODE``
+    This mode shows all sub-menus in one large tree.
 
-MENUCONFIG_MODE
----------------
-This mode shows all sub-menus in one large tree.
+    Example::
 
-Example::
+        make MENUCONFIG_MODE=single_menu menuconfig
 
-	make MENUCONFIG_MODE=single_menu menuconfig
-
-----------------------------------------------------------------------
 
 nconfig
--------
+=======
 
 nconfig is an alternate text-based configurator.  It lists function
 keys across the bottom of the terminal (window) that execute commands.
@@ -266,61 +237,59 @@ Use F1 for Global help or F3 for the Short help menu.
 
 Searching in nconfig:
 
-	You can search either in the menu entry "prompt" strings
-	or in the configuration symbols.
+    You can search either in the menu entry "prompt" strings
+    or in the configuration symbols.
+
+    Use / to begin a search through the menu entries.  This does
+    not support regular expressions.  Use <Down> or <Up> for
+    Next hit and Previous hit, respectively.  Use <Esc> to
+    terminate the search mode.
 
-	Use / to begin a search through the menu entries.  This does
-	not support regular expressions.  Use <Down> or <Up> for
-	Next hit and Previous hit, respectively.  Use <Esc> to
-	terminate the search mode.
+    F8 (SymSearch) searches the configuration symbols for the
+    given string or regular expression (regex).
 
-	F8 (SymSearch) searches the configuration symbols for the
-	given string or regular expression (regex).
+    In the SymSearch, pressing the key in the (#) prefix will
+    jump directly to that location. You will be returned to the
+    current search results after exiting this new menu.
 
-	In the SymSearch, pressing the key in the (#) prefix will
-	jump directly to that location. You will be returned to the
-	current search results after exiting this new menu.
+Environment variables:
 
-NCONFIG_MODE
-------------
-This mode shows all sub-menus in one large tree.
+``NCONFIG_MODE``
+    This mode shows all sub-menus in one large tree.
 
-Example::
+    Example::
 
-	make NCONFIG_MODE=single_menu nconfig
+        make NCONFIG_MODE=single_menu nconfig
 
-----------------------------------------------------------------------
 
 xconfig
--------
+=======
 
 Searching in xconfig:
 
-	The Search function searches for kernel configuration symbol
-	names, so you have to know something close to what you are
-	looking for.
-
-	Example::
+    The Search function searches for kernel configuration symbol
+    names, so you have to know something close to what you are
+    looking for.
 
-		Ctrl-F hotplug
+    Example::
 
-	or::
+        Ctrl-F hotplug
 
-		Menu: File, Search, hotplug
+    or::
 
-	lists all config symbol entries that contain "hotplug" in
-	the symbol name.  In this Search dialog, you may change the
-	config setting for any of the entries that are not grayed out.
-	You can also enter a different search string without having
-	to return to the main menu.
+        Menu: File, Search, hotplug
 
+    lists all config symbol entries that contain "hotplug" in
+    the symbol name.  In this Search dialog, you may change the
+    config setting for any of the entries that are not grayed out.
+    You can also enter a different search string without having
+    to return to the main menu.
 
-----------------------------------------------------------------------
 
 gconfig
--------
+=======
 
 Searching in gconfig:
 
-	There is no search command in gconfig.  However, gconfig does
-	have several different viewing choices, modes, and options.
+    There is no search command in gconfig.  However, gconfig does
+    have several different viewing choices, modes, and options.
diff --git linux-libre-6.8-gnu/Documentation/kbuild/llvm.rst linux-libre-6.9-rc6-gnu/Documentation/kbuild/llvm.rst
index b1d97fafddcf..bb5c44f8bd1c 100644
--- linux-libre-6.8-gnu/Documentation/kbuild/llvm.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/kbuild/llvm.rst
@@ -178,7 +178,7 @@ yet. Bug reports are always welcome at the issue tracker below!
      - ``LLVM=1``
    * - s390
      - Maintained
-     - ``CC=clang``
+     - ``LLVM=1`` (LLVM >= 18.1.0), ``CC=clang`` (LLVM < 18.1.0)
    * - um (User Mode)
      - Maintained
      - ``LLVM=1``
diff --git linux-libre-6.8-gnu/Documentation/maintainer/maintainer-entry-profile.rst linux-libre-6.9-rc6-gnu/Documentation/maintainer/maintainer-entry-profile.rst
index 18cee1edaecb..b49fb6dc4d0c 100644
--- linux-libre-6.8-gnu/Documentation/maintainer/maintainer-entry-profile.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/maintainer/maintainer-entry-profile.rst
@@ -102,7 +102,10 @@ to do something different in the near future.
    ../doc-guide/maintainer-profile
    ../nvdimm/maintainer-entry-profile
    ../arch/riscv/patch-acceptance
+   ../process/maintainer-soc
+   ../process/maintainer-soc-clean-dts
    ../driver-api/media/maintainer-entry-profile
+   ../process/maintainer-netdev
    ../driver-api/vfio-pci-device-specific-driver-acceptance
    ../nvme/feature-and-quirk-policy
    ../filesystems/xfs/xfs-maintainer-entry-profile
diff --git linux-libre-6.8-gnu/Documentation/misc-devices/xilinx_sdfec.rst linux-libre-6.9-rc6-gnu/Documentation/misc-devices/xilinx_sdfec.rst
index 8c8a289d69a3..698e6630f3a7 100644
--- linux-libre-6.8-gnu/Documentation/misc-devices/xilinx_sdfec.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/misc-devices/xilinx_sdfec.rst
@@ -29,7 +29,7 @@ follows:
   - Does not support shared LDPC code table wraparound
 
 The device tree entry is described in:
-`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.txt>`_
+`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.yaml>`_
 
 
 Modes of Operation
diff --git linux-libre-6.8-gnu/Documentation/mm/damon/design.rst linux-libre-6.9-rc6-gnu/Documentation/mm/damon/design.rst
index 1bb69524a62e..5620aab9b385 100644
--- linux-libre-6.8-gnu/Documentation/mm/damon/design.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/mm/damon/design.rst
@@ -31,6 +31,8 @@ DAMON subsystem is configured with three layers including
   interfaces for the user space, on top of the core layer.
 
 
+.. _damon_design_configurable_operations_set:
+
 Configurable Operations Set
 ---------------------------
 
@@ -63,6 +65,8 @@ modules that built on top of the core layer using the API, which can be easily
 used by the user space end users.
 
 
+.. _damon_operations_set:
+
 Operations Set Layer
 ====================
 
@@ -71,16 +75,26 @@ The monitoring operations are defined in two parts:
 1. Identification of the monitoring target address range for the address space.
 2. Access check of specific address range in the target space.
 
-DAMON currently provides the implementations of the operations for the physical
-and virtual address spaces. Below two subsections describe how those work.
+DAMON currently provides below three operation sets.  Below two subsections
+describe how those work.
+
+ - vaddr: Monitor virtual address spaces of specific processes
+ - fvaddr: Monitor fixed virtual address ranges
+ - paddr: Monitor the physical address space of the system
 
 
+ .. _damon_design_vaddr_target_regions_construction:
+
 VMA-based Target Address Range Construction
 -------------------------------------------
 
-This is only for the virtual address space monitoring operations
-implementation.  That for the physical address space simply asks users to
-manually set the monitoring target address ranges.
+A mechanism of ``vaddr`` DAMON operations set that automatically initializes
+and updates the monitoring target address regions so that entire memory
+mappings of the target processes can be covered.
+
+This mechanism is only for the ``vaddr`` operations set.  In cases of
+``fvaddr`` and ``paddr`` operation sets, users are asked to manually set the
+monitoring target address ranges.
 
 Only small parts in the super-huge virtual address space of the processes are
 mapped to the physical memory and accessed.  Thus, tracking the unmapped
@@ -294,9 +308,29 @@ not mandated to support all actions of the list.  Hence, the availability of
 specific DAMOS action depends on what operations set is selected to be used
 together.
 
-Applying an action to a region is considered as changing the region's
-characteristics.  Hence, DAMOS resets the age of regions when an action is
-applied to those.
+The list of the supported actions, their meaning, and DAMON operations sets
+that supports each action are as below.
+
+ - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``pageout``: Reclaim the region.
+   Supported by ``vaddr``, ``fvaddr`` and ``paddr`` operations set.
+ - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``lru_prio``: Prioritize the region on its LRU lists.
+   Supported by ``paddr`` operations set.
+ - ``lru_deprio``: Deprioritize the region on its LRU lists.
+   Supported by ``paddr`` operations set.
+ - ``stat``: Do nothing but count the statistics.
+   Supported by all operations sets.
+
+Applying the actions except ``stat`` to a region is considered as changing the
+region's characteristics.  Hence, DAMOS resets the age of regions when any such
+actions are applied to those.
 
 
 .. _damon_design_damos_access_pattern:
@@ -364,12 +398,28 @@ Aim-oriented Feedback-driven Auto-tuning
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Automatic feedback-driven quota tuning.  Instead of setting the absolute quota
-value, users can repeatedly provide numbers representing how much of their goal
-for the scheme is achieved as feedback.  DAMOS then automatically tunes the
+value, users can specify the metric of their interest, and what target value
+they want the metric value to be.  DAMOS then automatically tunes the
 aggressiveness (the quota) of the corresponding scheme.  For example, if DAMOS
 is under achieving the goal, DAMOS automatically increases the quota.  If DAMOS
 is over achieving the goal, it decreases the quota.
 
+The goal can be specified with three parameters, namely ``target_metric``,
+``target_value``, and ``current_value``.  The auto-tuning mechanism tries to
+make ``current_value`` of ``target_metric`` be same to ``target_value``.
+Currently, two ``target_metric`` are provided.
+
+- ``user_input``: User-provided value.  Users could use any metric that they
+  has interest in for the value.  Use space main workload's latency or
+  throughput, system metrics like free memory ratio or memory pressure stall
+  time (PSI) could be examples.  Note that users should explicitly set
+  ``current_value`` on their own in this case.  In other words, users should
+  repeatedly provide the feedback.
+- ``some_mem_psi_us``: System-wide ``some`` memory pressure stall information
+  in microseconds that measured from last quota reset to next quota reset.
+  DAMOS does the measurement on its own, so only ``target_value`` need to be
+  set by users at the initial time.  In other words, DAMOS does self-feedback.
+
 
 .. _damon_design_damos_watermarks:
 
diff --git linux-libre-6.8-gnu/Documentation/mm/damon/maintainer-profile.rst linux-libre-6.9-rc6-gnu/Documentation/mm/damon/maintainer-profile.rst
index a84c14e59053..5a306e4de22e 100644
--- linux-libre-6.8-gnu/Documentation/mm/damon/maintainer-profile.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/mm/damon/maintainer-profile.rst
@@ -21,8 +21,8 @@ be queued in mm-stable [3]_ , and finally pull-requested to the mainline by the
 memory management subsystem maintainer.
 
 Note again the patches for review should be made against the mm-unstable
-tree[1] whenever possible.  damon/next is only for preview of others' works in
-progress.
+tree [1]_ whenever possible.  damon/next is only for preview of others' works
+in progress.
 
 Submit checklist addendum
 -------------------------
@@ -41,8 +41,8 @@ Further doing below and putting the results will be helpful.
 Key cycle dates
 ---------------
 
-Patches can be sent anytime.  Key cycle dates of the mm-unstable[1] and
-mm-stable[3] trees depend on the memory management subsystem maintainer.
+Patches can be sent anytime.  Key cycle dates of the mm-unstable [1]_ and
+mm-stable [3]_ trees depend on the memory management subsystem maintainer.
 
 Review cadence
 --------------
diff --git linux-libre-6.8-gnu/Documentation/mm/page_cache.rst linux-libre-6.9-rc6-gnu/Documentation/mm/page_cache.rst
index 75eba7c431b2..138d61f869df 100644
--- linux-libre-6.8-gnu/Documentation/mm/page_cache.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/mm/page_cache.rst
@@ -3,3 +3,13 @@
 ==========
 Page Cache
 ==========
+
+The page cache is the primary way that the user and the rest of the kernel
+interact with filesystems.  It can be bypassed (e.g. with O_DIRECT),
+but normal reads, writes and mmaps go through the page cache.
+
+Folios
+======
+
+The folio is the unit of memory management within the page cache.
+Operations 
diff --git linux-libre-6.8-gnu/Documentation/mm/page_owner.rst linux-libre-6.9-rc6-gnu/Documentation/mm/page_owner.rst
index 62e3f7ab23cc..3a45a20fc05a 100644
--- linux-libre-6.8-gnu/Documentation/mm/page_owner.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/mm/page_owner.rst
@@ -24,6 +24,11 @@ fragmentation statistics can be obtained through gfp flag information of
 each page. It is already implemented and activated if page owner is
 enabled. Other usages are more than welcome.
 
+It can also be used to show all the stacks and their current number of
+allocated base pages, which gives us a quick overview of where the memory
+is going without the need to screen through all the pages and match the
+allocation and free operation.
+
 page owner is disabled by default. So, if you'd like to use it, you need
 to add "page_owner=on" to your boot cmdline. If the kernel is built
 with page owner and page owner is disabled in runtime due to not enabling
@@ -68,6 +73,49 @@ Usage
 
 4) Analyze information from page owner::
 
+	cat /sys/kernel/debug/page_owner_stacks/show_stacks > stacks.txt
+	cat stacks.txt
+	 post_alloc_hook+0x177/0x1a0
+	 get_page_from_freelist+0xd01/0xd80
+	 __alloc_pages+0x39e/0x7e0
+	 allocate_slab+0xbc/0x3f0
+	 ___slab_alloc+0x528/0x8a0
+	 kmem_cache_alloc+0x224/0x3b0
+	 sk_prot_alloc+0x58/0x1a0
+	 sk_alloc+0x32/0x4f0
+	 inet_create+0x427/0xb50
+	 __sock_create+0x2e4/0x650
+	 inet_ctl_sock_create+0x30/0x180
+	 igmp_net_init+0xc1/0x130
+	 ops_init+0x167/0x410
+	 setup_net+0x304/0xa60
+	 copy_net_ns+0x29b/0x4a0
+	 create_new_namespaces+0x4a1/0x820
+	nr_base_pages: 16
+	...
+	...
+	echo 7000 > /sys/kernel/debug/page_owner_stacks/count_threshold
+	cat /sys/kernel/debug/page_owner_stacks/show_stacks> stacks_7000.txt
+	cat stacks_7000.txt
+	 post_alloc_hook+0x177/0x1a0
+	 get_page_from_freelist+0xd01/0xd80
+	 __alloc_pages+0x39e/0x7e0
+	 alloc_pages_mpol+0x22e/0x490
+	 folio_alloc+0xd5/0x110
+	 filemap_alloc_folio+0x78/0x230
+	 page_cache_ra_order+0x287/0x6f0
+	 filemap_get_pages+0x517/0x1160
+	 filemap_read+0x304/0x9f0
+	 xfs_file_buffered_read+0xe6/0x1d0 [xfs]
+	 xfs_file_read_iter+0x1f0/0x380 [xfs]
+	 __kernel_read+0x3b9/0x730
+	 kernel_read_file+0x309/0x4d0
+	 __do_sys_finit_module+0x381/0x730
+	 do_syscall_64+0x8d/0x150
+	 entry_SYSCALL_64_after_hwframe+0x62/0x6a
+	nr_base_pages: 20824
+	...
+
 	cat /sys/kernel/debug/page_owner > page_owner_full.txt
 	./page_owner_sort page_owner_full.txt sorted_page_owner.txt
 
diff --git linux-libre-6.8-gnu/Documentation/mm/slub.rst linux-libre-6.9-rc6-gnu/Documentation/mm/slub.rst
index be75971532f5..b517ee28a955 100644
--- linux-libre-6.8-gnu/Documentation/mm/slub.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/mm/slub.rst
@@ -9,7 +9,7 @@ SLUB can enable debugging only for selected slabs in order to avoid
 an impact on overall system performance which may make a bug more
 difficult to find.
 
-In order to switch debugging on one can add an option ``slub_debug``
+In order to switch debugging on one can add an option ``slab_debug``
 to the kernel command line. That will enable full debugging for
 all slabs.
 
@@ -26,16 +26,16 @@ be enabled on the command line. F.e. no tracking information will be
 available without debugging on and validation can only partially
 be performed if debugging was not switched on.
 
-Some more sophisticated uses of slub_debug:
+Some more sophisticated uses of slab_debug:
 -------------------------------------------
 
-Parameters may be given to ``slub_debug``. If none is specified then full
+Parameters may be given to ``slab_debug``. If none is specified then full
 debugging is enabled. Format:
 
-slub_debug=<Debug-Options>
+slab_debug=<Debug-Options>
 	Enable options for all slabs
 
-slub_debug=<Debug-Options>,<slab name1>,<slab name2>,...
+slab_debug=<Debug-Options>,<slab name1>,<slab name2>,...
 	Enable options only for select slabs (no spaces
 	after a comma)
 
@@ -60,23 +60,23 @@ Possible debug options are::
 
 F.e. in order to boot just with sanity checks and red zoning one would specify::
 
-	slub_debug=FZ
+	slab_debug=FZ
 
 Trying to find an issue in the dentry cache? Try::
 
-	slub_debug=,dentry
+	slab_debug=,dentry
 
 to only enable debugging on the dentry cache.  You may use an asterisk at the
 end of the slab name, in order to cover all slabs with the same prefix.  For
 example, here's how you can poison the dentry cache as well as all kmalloc
 slabs::
 
-	slub_debug=P,kmalloc-*,dentry
+	slab_debug=P,kmalloc-*,dentry
 
 Red zoning and tracking may realign the slab.  We can just apply sanity checks
 to the dentry cache with::
 
-	slub_debug=F,dentry
+	slab_debug=F,dentry
 
 Debugging options may require the minimum possible slab order to increase as
 a result of storing the metadata (for example, caches with PAGE_SIZE object
@@ -84,20 +84,20 @@ sizes).  This has a higher liklihood of resulting in slab allocation errors
 in low memory situations or if there's high fragmentation of memory.  To
 switch off debugging for such caches by default, use::
 
-	slub_debug=O
+	slab_debug=O
 
 You can apply different options to different list of slab names, using blocks
 of options. This will enable red zoning for dentry and user tracking for
 kmalloc. All other slabs will not get any debugging enabled::
 
-	slub_debug=Z,dentry;U,kmalloc-*
+	slab_debug=Z,dentry;U,kmalloc-*
 
 You can also enable options (e.g. sanity checks and poisoning) for all caches
 except some that are deemed too performance critical and don't need to be
 debugged by specifying global debug options followed by a list of slab names
 with "-" as options::
 
-	slub_debug=FZ;-,zs_handle,zspage
+	slab_debug=FZ;-,zs_handle,zspage
 
 The state of each debug option for a slab can be found in the respective files
 under::
@@ -105,7 +105,7 @@ under::
 	/sys/kernel/slab/<slab name>/
 
 If the file contains 1, the option is enabled, 0 means disabled. The debug
-options from the ``slub_debug`` parameter translate to the following files::
+options from the ``slab_debug`` parameter translate to the following files::
 
 	F	sanity_checks
 	Z	red_zone
@@ -129,7 +129,7 @@ in order to reduce overhead and increase cache hotness of objects.
 Slab validation
 ===============
 
-SLUB can validate all object if the kernel was booted with slub_debug. In
+SLUB can validate all object if the kernel was booted with slab_debug. In
 order to do so you must have the ``slabinfo`` tool. Then you can do
 ::
 
@@ -150,29 +150,29 @@ list_lock once in a while to deal with partial slabs. That overhead is
 governed by the order of the allocation for each slab. The allocations
 can be influenced by kernel parameters:
 
-.. slub_min_objects=x		(default 4)
-.. slub_min_order=x		(default 0)
-.. slub_max_order=x		(default 3 (PAGE_ALLOC_COSTLY_ORDER))
+.. slab_min_objects=x		(default: automatically scaled by number of cpus)
+.. slab_min_order=x		(default 0)
+.. slab_max_order=x		(default 3 (PAGE_ALLOC_COSTLY_ORDER))
 
-``slub_min_objects``
+``slab_min_objects``
 	allows to specify how many objects must at least fit into one
 	slab in order for the allocation order to be acceptable.  In
 	general slub will be able to perform this number of
 	allocations on a slab without consulting centralized resources
 	(list_lock) where contention may occur.
 
-``slub_min_order``
+``slab_min_order``
 	specifies a minimum order of slabs. A similar effect like
-	``slub_min_objects``.
+	``slab_min_objects``.
 
-``slub_max_order``
-	specified the order at which ``slub_min_objects`` should no
+``slab_max_order``
+	specified the order at which ``slab_min_objects`` should no
 	longer be checked. This is useful to avoid SLUB trying to
-	generate super large order pages to fit ``slub_min_objects``
+	generate super large order pages to fit ``slab_min_objects``
 	of a slab cache with large object sizes into one high order
 	page. Setting command line parameter
 	``debug_guardpage_minorder=N`` (N > 0), forces setting
-	``slub_max_order`` to 0, what cause minimum possible order of
+	``slab_max_order`` to 0, what cause minimum possible order of
 	slabs allocation.
 
 SLUB Debug output
@@ -219,7 +219,7 @@ Here is a sample of slub debug output::
  FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc
 
 If SLUB encounters a corrupted object (full detection requires the kernel
-to be booted with slub_debug) then the following output will be dumped
+to be booted with slab_debug) then the following output will be dumped
 into the syslog:
 
 1. Description of the problem encountered
@@ -239,7 +239,7 @@ into the syslog:
 	pid=<pid of the process>
 
    (Object allocation / free information is only available if SLAB_STORE_USER is
-   set for the slab. slub_debug sets that option)
+   set for the slab. slab_debug sets that option)
 
 2. The object contents if an object was involved.
 
@@ -262,7 +262,7 @@ into the syslog:
 	the object boundary.
 
 	(Redzone information is only available if SLAB_RED_ZONE is set.
-	slub_debug sets that option)
+	slab_debug sets that option)
 
    Padding <address> : <bytes>
 	Unused data to fill up the space in order to get the next object
@@ -296,7 +296,7 @@ Emergency operations
 
 Minimal debugging (sanity checks alone) can be enabled by booting with::
 
-	slub_debug=F
+	slab_debug=F
 
 This will be generally be enough to enable the resiliency features of slub
 which will keep the system running even if a bad kernel component will
@@ -311,13 +311,13 @@ and enabling debugging only for that cache
 
 I.e.::
 
-	slub_debug=F,dentry
+	slab_debug=F,dentry
 
 If the corruption occurs by writing after the end of the object then it
 may be advisable to enable a Redzone to avoid corrupting the beginning
 of other objects::
 
-	slub_debug=FZ,dentry
+	slab_debug=FZ,dentry
 
 Extended slabinfo mode and plotting
 ===================================
diff --git linux-libre-6.8-gnu/Documentation/netlink/genetlink-c.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/genetlink-c.yaml
index c58f7153fcf8..4dfd899a1661 100644
--- linux-libre-6.8-gnu/Documentation/netlink/genetlink-c.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/genetlink-c.yaml
@@ -11,7 +11,7 @@ $defs:
     minimum: 0
   len-or-define:
     type: [ string, integer ]
-    pattern: ^[0-9A-Za-z_]+( - 1)?$
+    pattern: ^[0-9A-Za-z_-]+( - 1)?$
     minimum: 0
   len-or-limit:
     # literal int or limit based on fixed-width type e.g. u8-min, u16-max, etc.
@@ -126,8 +126,9 @@ properties:
             Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
           type: string
         enum-name:
-          description: Name for the enum type of the attribute.
-          type: string
+          description: |
+            Name for the enum type of the attribute, if empty no name will be used.
+          type: [ string, "null" ]
         doc:
           description: Documentation of the space.
           type: string
@@ -208,6 +209,11 @@ properties:
                   exact-len:
                     description: Exact length for a string or a binary attribute.
                     $ref: '#/$defs/len-or-define'
+                  unterminated-ok:
+                    description: |
+                      For string attributes, do not check whether attribute
+                      contains the terminating null character.
+                    type: boolean
               sub-type: *attr-type
               display-hint: &display-hint
                 description: |
@@ -261,14 +267,16 @@ properties:
           the prefix with the upper case name of the command, with dashes replaced by underscores.
         type: string
       enum-name:
-        description: Name for the enum type with commands.
-        type: string
+        description: |
+          Name for the enum type with commands, if empty no name will be used.
+        type: [ string, "null" ]
       async-prefix:
         description: Same as name-prefix but used to render notifications and events to separate enum.
         type: string
       async-enum:
-        description: Name for the enum type with notifications/events.
-        type: string
+        description: |
+          Name for the enum type with commands, if empty no name will be used.
+        type: [ string, "null" ]
       list:
         description: List of commands
         type: array
@@ -370,3 +378,22 @@ properties:
               type: string
             # End genetlink-c
             flags: *cmd_flags
+
+  kernel-family:
+    description: Additional global attributes used for kernel C code generation.
+    type: object
+    additionalProperties: False
+    properties:
+      headers:
+        description: |
+          List of extra headers which should be included in the source
+          of the generated code.
+        type: array
+        items:
+          type: string
+      sock-priv:
+        description: |
+          Literal name of the type which is used within the kernel
+          to store the socket state. The type / structure is internal
+          to the kernel, and is not defined in the spec.
+        type: string
diff --git linux-libre-6.8-gnu/Documentation/netlink/genetlink-legacy.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/genetlink-legacy.yaml
index 938703088306..b48ad3b1cc32 100644
--- linux-libre-6.8-gnu/Documentation/netlink/genetlink-legacy.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/genetlink-legacy.yaml
@@ -11,7 +11,7 @@ $defs:
     minimum: 0
   len-or-define:
     type: [ string, integer ]
-    pattern: ^[0-9A-Za-z_]+( - 1)?$
+    pattern: ^[0-9A-Za-z_-]+( - 1)?$
     minimum: 0
   len-or-limit:
     # literal int or limit based on fixed-width type e.g. u8-min, u16-max, etc.
@@ -168,8 +168,9 @@ properties:
             Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
           type: string
         enum-name:
-          description: Name for the enum type of the attribute.
-          type: string
+          description: |
+            Name for the enum type of the attribute, if empty no name will be used.
+          type: [ string, "null" ]
         doc:
           description: Documentation of the space.
           type: string
@@ -251,6 +252,11 @@ properties:
                   exact-len:
                     description: Exact length for a string or a binary attribute.
                     $ref: '#/$defs/len-or-define'
+                  unterminated-ok:
+                    description: |
+                      For string attributes, do not check whether attribute
+                      contains the terminating null character.
+                    type: boolean
               sub-type: *attr-type
               display-hint: *display-hint
               # Start genetlink-c
@@ -304,14 +310,16 @@ properties:
           the prefix with the upper case name of the command, with dashes replaced by underscores.
         type: string
       enum-name:
-        description: Name for the enum type with commands.
-        type: string
+        description: |
+          Name for the enum type with commands, if empty no name will be used.
+        type: [ string, "null" ]
       async-prefix:
         description: Same as name-prefix but used to render notifications and events to separate enum.
         type: string
       async-enum:
-        description: Name for the enum type with notifications/events.
-        type: string
+        description: |
+          Name for the enum type with commands, if empty no name will be used.
+        type: [ string, "null" ]
       # Start genetlink-legacy
       fixed-header: &fixed-header
         description: |
@@ -431,3 +439,22 @@ properties:
               type: string
             # End genetlink-c
             flags: *cmd_flags
+
+  kernel-family:
+    description: Additional global attributes used for kernel C code generation.
+    type: object
+    additionalProperties: False
+    properties:
+      headers:
+        description: |
+          List of extra headers which should be included in the source
+          of the generated code.
+        type: array
+        items:
+          type: string
+      sock-priv:
+        description: |
+          Literal name of the type which is used within the kernel
+          to store the socket state. The type / structure is internal
+          to the kernel, and is not defined in the spec.
+        type: string
diff --git linux-libre-6.8-gnu/Documentation/netlink/genetlink.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/genetlink.yaml
index 3283bf458ff1..ebd6ee743fcc 100644
--- linux-libre-6.8-gnu/Documentation/netlink/genetlink.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/genetlink.yaml
@@ -11,7 +11,7 @@ $defs:
     minimum: 0
   len-or-define:
     type: [ string, integer ]
-    pattern: ^[0-9A-Za-z_]+( - 1)?$
+    pattern: ^[0-9A-Za-z_-]+( - 1)?$
     minimum: 0
   len-or-limit:
     # literal int or limit based on fixed-width type e.g. u8-min, u16-max, etc.
@@ -328,3 +328,22 @@ properties:
                 The name for the group, used to form the define and the value of the define.
               type: string
             flags: *cmd_flags
+
+  kernel-family:
+    description: Additional global attributes used for kernel C code generation.
+    type: object
+    additionalProperties: False
+    properties:
+      headers:
+        description: |
+          List of extra headers which should be included in the source
+          of the generated code.
+        type: array
+        items:
+          type: string
+      sock-priv:
+        description: |
+          Literal name of the type which is used within the kernel
+          to store the socket state. The type / structure is internal
+          to the kernel, and is not defined in the spec.
+        type: string
diff --git linux-libre-6.8-gnu/Documentation/netlink/netlink-raw.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/netlink-raw.yaml
index 04b92f1a5cd6..a76e54cbadbc 100644
--- linux-libre-6.8-gnu/Documentation/netlink/netlink-raw.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/netlink-raw.yaml
@@ -11,7 +11,7 @@ $defs:
     minimum: 0
   len-or-define:
     type: [ string, integer ]
-    pattern: ^[0-9A-Za-z_]+( - 1)?$
+    pattern: ^[0-9A-Za-z_-]+( - 1)?$
     minimum: 0
 
 # Schema for specs
@@ -152,14 +152,23 @@ properties:
                   the right formatting mechanism when displaying values of this
                   type.
                 enum: [ hex, mac, fddi, ipv4, ipv6, uuid ]
+              struct:
+                description: Name of the nested struct type.
+                type: string
             if:
               properties:
                 type:
-                  oneOf:
-                    - const: binary
-                    - const: pad
+                  const: pad
             then:
               required: [ len ]
+            if:
+              properties:
+                type:
+                  const: binary
+            then:
+              oneOf:
+                - required: [ len ]
+                - required: [ struct ]
         # End genetlink-legacy
 
   attribute-sets:
@@ -180,8 +189,9 @@ properties:
             Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
           type: string
         enum-name:
-          description: Name for the enum type of the attribute.
-          type: string
+          description: |
+            Name for the enum type of the attribute, if empty no name will be used.
+          type: [ string, "null" ]
         doc:
           description: Documentation of the space.
           type: string
@@ -261,6 +271,11 @@ properties:
                   exact-len:
                     description: Exact length for a string or a binary attribute.
                     $ref: '#/$defs/len-or-define'
+                  unterminated-ok:
+                    description: |
+                      For string attributes, do not check whether attribute
+                      contains the terminating null character.
+                    type: boolean
               sub-type: *attr-type
               display-hint: *display-hint
               # Start genetlink-c
@@ -362,14 +377,16 @@ properties:
           the prefix with the upper case name of the command, with dashes replaced by underscores.
         type: string
       enum-name:
-        description: Name for the enum type with commands.
-        type: string
+        description: |
+          Name for the enum type with commands, if empty no name will be used.
+        type: [ string, "null" ]
       async-prefix:
         description: Same as name-prefix but used to render notifications and events to separate enum.
         type: string
       async-enum:
-        description: Name for the enum type with notifications/events.
-        type: string
+        description: |
+          Name for the enum type with commands, if empty no name will be used.
+        type: [ string, "null" ]
       # Start genetlink-legacy
       fixed-header: &fixed-header
         description: |
diff --git linux-libre-6.8-gnu/Documentation/netlink/specs/devlink.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/devlink.yaml
index cf6eaa0da821..09fbb4c03fc8 100644
--- linux-libre-6.8-gnu/Documentation/netlink/specs/devlink.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/devlink.yaml
@@ -290,7 +290,7 @@ attribute-sets:
         enum: eswitch-mode
       -
         name: eswitch-inline-mode
-        type: u16
+        type: u8
         enum: eswitch-inline-mode
       -
         name: dpipe-tables
diff --git linux-libre-6.8-gnu/Documentation/netlink/specs/dpll.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/dpll.yaml
index 3dcc9ece272a..95b0eb1486bf 100644
--- linux-libre-6.8-gnu/Documentation/netlink/specs/dpll.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/dpll.yaml
@@ -51,6 +51,40 @@ definitions:
           if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the
           dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED)
     render-max: true
+  -
+    type: enum
+    name: lock-status-error
+    doc: |
+      if previous status change was done due to a failure, this provides
+      information of dpll device lock status error.
+      Valid values for DPLL_A_LOCK_STATUS_ERROR attribute
+    entries:
+      -
+        name: none
+        doc: |
+          dpll device lock status was changed without any error
+        value: 1
+      -
+        name: undefined
+        doc: |
+          dpll device lock status was changed due to undefined error.
+          Driver fills this value up in case it is not able
+          to obtain suitable exact error type.
+      -
+        name: media-down
+        doc: |
+          dpll device lock status was changed because of associated
+          media got down.
+          This may happen for example if dpll device was previously
+          locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
+      -
+        name: fractional-frequency-offset-too-high
+        doc: |
+          the FFO (Fractional Frequency Offset) between the RX and TX
+          symbol rate on the media got too high.
+          This may happen for example if dpll device was previously
+          locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
+    render-max: true
   -
     type: const
     name: temp-divider
@@ -214,6 +248,10 @@ attribute-sets:
         name: type
         type: u32
         enum: type
+      -
+        name: lock-status-error
+        type: u32
+        enum: lock-status-error
   -
     name: pin
     enum-name: dpll_a_pin
@@ -274,6 +312,7 @@ attribute-sets:
       -
         name: capabilities
         type: u32
+        enum: pin-capabilities
       -
         name: parent-device
         type: nest
@@ -379,6 +418,7 @@ operations:
             - mode
             - mode-supported
             - lock-status
+            - lock-status-error
             - temp
             - clock-id
             - type
diff --git linux-libre-6.8-gnu/Documentation/netlink/specs/mptcp_pm.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/mptcp_pm.yaml
index 49f90cfb4698..af525ed29792 100644
--- linux-libre-6.8-gnu/Documentation/netlink/specs/mptcp_pm.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/mptcp_pm.yaml
@@ -292,13 +292,14 @@ operations:
     -
       name: get-addr
       doc: Get endpoint information
-      attribute-set: endpoint
+      attribute-set: attr
       dont-validate: [ strict ]
       flags: [ uns-admin-perm ]
       do: &get-addr-attrs
         request:
           attributes:
            - addr
+           - token
         reply:
           attributes:
            - addr
diff --git linux-libre-6.8-gnu/Documentation/netlink/specs/netdev.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/netdev.yaml
index 3addac970680..76352dbd2be4 100644
--- linux-libre-6.8-gnu/Documentation/netlink/specs/netdev.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/netdev.yaml
@@ -74,6 +74,10 @@ definitions:
     name: queue-type
     type: enum
     entries: [ rx, tx ]
+  -
+    name: qstats-scope
+    type: flags
+    entries: [ queue ]
 
 attribute-sets:
   -
@@ -265,6 +269,73 @@ attribute-sets:
         doc: ID of the NAPI instance which services this queue.
         type: u32
 
+  -
+    name: qstats
+    doc: |
+      Get device statistics, scoped to a device or a queue.
+      These statistics extend (and partially duplicate) statistics available
+      in struct rtnl_link_stats64.
+      Value of the `scope` attribute determines how statistics are
+      aggregated. When aggregated for the entire device the statistics
+      represent the total number of events since last explicit reset of
+      the device (i.e. not a reconfiguration like changing queue count).
+      When reported per-queue, however, the statistics may not add
+      up to the total number of events, will only be reported for currently
+      active objects, and will likely report the number of events since last
+      reconfiguration.
+    attributes:
+      -
+        name: ifindex
+        doc: ifindex of the netdevice to which stats belong.
+        type: u32
+        checks:
+          min: 1
+      -
+        name: queue-type
+        doc: Queue type as rx, tx, for queue-id.
+        type: u32
+        enum: queue-type
+      -
+        name: queue-id
+        doc: Queue ID, if stats are scoped to a single queue instance.
+        type: u32
+      -
+        name: scope
+        doc: |
+          What object type should be used to iterate over the stats.
+        type: uint
+        enum: qstats-scope
+      -
+        name: rx-packets
+        doc: |
+          Number of wire packets successfully received and passed to the stack.
+          For drivers supporting XDP, XDP is considered the first layer
+          of the stack, so packets consumed by XDP are still counted here.
+        type: uint
+        value: 8 # reserve some attr ids in case we need more metadata later
+      -
+        name: rx-bytes
+        doc: Successfully received bytes, see `rx-packets`.
+        type: uint
+      -
+        name: tx-packets
+        doc: |
+          Number of wire packets successfully sent. Packet is considered to be
+          successfully sent once it is in device memory (usually this means
+          the device has issued a DMA completion for the packet).
+        type: uint
+      -
+        name: tx-bytes
+        doc: Successfully sent bytes, see `tx-packets`.
+        type: uint
+      -
+        name: rx-alloc-fail
+        doc: |
+          Number of times skb or buffer allocation failed on the Rx datapath.
+          Allocation failure may, or may not result in a packet drop, depending
+          on driver implementation and whether system recovers quickly.
+        type: uint
+
 operations:
   list:
     -
@@ -405,6 +476,26 @@ operations:
           attributes:
             - ifindex
         reply: *napi-get-op
+    -
+      name: qstats-get
+      doc: |
+        Get / dump fine grained statistics. Which statistics are reported
+        depends on the device and the driver, and whether the driver stores
+        software counters per-queue.
+      attribute-set: qstats
+      dump:
+        request:
+          attributes:
+            - scope
+        reply:
+          attributes:
+            - ifindex
+            - queue-type
+            - queue-id
+            - rx-packets
+            - rx-bytes
+            - tx-packets
+            - tx-bytes
 
 mcast-groups:
   list:
diff --git linux-libre-6.8-gnu/Documentation/netlink/specs/nlctrl.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/nlctrl.yaml
new file mode 100644
index 000000000000..b1632b95f725
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/nlctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+name: nlctrl
+protocol: genetlink-legacy
+uapi-header: linux/genetlink.h
+
+doc: |
+  genetlink meta-family that exposes information about all genetlink
+  families registered in the kernel (including itself).
+
+definitions:
+  -
+    name: op-flags
+    type: flags
+    enum-name:
+    entries:
+      - admin-perm
+      - cmd-cap-do
+      - cmd-cap-dump
+      - cmd-cap-haspol
+      - uns-admin-perm
+  -
+    name: attr-type
+    enum-name: netlink-attribute-type
+    type: enum
+    entries:
+      - invalid
+      - flag
+      - u8
+      - u16
+      - u32
+      - u64
+      - s8
+      - s16
+      - s32
+      - s64
+      - binary
+      - string
+      - nul-string
+      - nested
+      - nested-array
+      - bitfield32
+      - sint
+      - uint
+
+attribute-sets:
+  -
+    name: ctrl-attrs
+    name-prefix: ctrl-attr-
+    attributes:
+      -
+        name: family-id
+        type: u16
+      -
+        name: family-name
+        type: string
+      -
+        name: version
+        type: u32
+      -
+        name: hdrsize
+        type: u32
+      -
+        name: maxattr
+        type: u32
+      -
+        name: ops
+        type: array-nest
+        nested-attributes: op-attrs
+      -
+        name: mcast-groups
+        type: array-nest
+        nested-attributes: mcast-group-attrs
+      -
+        name: policy
+        type: nest-type-value
+        type-value: [ policy-id, attr-id ]
+        nested-attributes: policy-attrs
+      -
+        name: op-policy
+        type: nest-type-value
+        type-value: [ op-id ]
+        nested-attributes: op-policy-attrs
+      -
+        name: op
+        type: u32
+  -
+    name: mcast-group-attrs
+    name-prefix: ctrl-attr-mcast-grp-
+    enum-name:
+    attributes:
+      -
+        name: name
+        type: string
+      -
+        name: id
+        type: u32
+  -
+    name: op-attrs
+    name-prefix: ctrl-attr-op-
+    enum-name:
+    attributes:
+      -
+        name: id
+        type: u32
+      -
+        name: flags
+        type: u32
+        enum: op-flags
+        enum-as-flags: true
+  -
+    name: policy-attrs
+    name-prefix: nl-policy-type-attr-
+    enum-name:
+    attributes:
+      -
+        name: type
+        type: u32
+        enum: attr-type
+      -
+        name: min-value-s
+        type: s64
+      -
+        name: max-value-s
+        type: s64
+      -
+        name: min-value-u
+        type: u64
+      -
+        name: max-value-u
+        type: u64
+      -
+        name: min-length
+        type: u32
+      -
+        name: max-length
+        type: u32
+      -
+        name: policy-idx
+        type: u32
+      -
+        name: policy-maxtype
+        type: u32
+      -
+        name: bitfield32-mask
+        type: u32
+      -
+        name: mask
+        type: u64
+      -
+        name: pad
+        type: pad
+  -
+    name: op-policy-attrs
+    name-prefix: ctrl-attr-policy-
+    enum-name:
+    attributes:
+      -
+        name: do
+        type: u32
+      -
+        name: dump
+        type: u32
+
+operations:
+  enum-model: directional
+  name-prefix: ctrl-cmd-
+  list:
+    -
+      name: getfamily
+      doc: Get / dump genetlink families
+      attribute-set: ctrl-attrs
+      do:
+        request:
+          value: 3
+          attributes:
+            - family-name
+        reply: &all-attrs
+          value: 1
+          attributes:
+            - family-id
+            - family-name
+            - hdrsize
+            - maxattr
+            - mcast-groups
+            - ops
+            - version
+      dump:
+        reply: *all-attrs
+    -
+      name: getpolicy
+      doc: Get / dump genetlink policies
+      attribute-set: ctrl-attrs
+      dump:
+        request:
+          value: 10
+          attributes:
+            - family-name
+            - family-id
+            - op
+        reply:
+          value: 10
+          attributes:
+            - family-id
+            - op-policy
+            - policy
diff --git linux-libre-6.8-gnu/Documentation/netlink/specs/tc.yaml linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/tc.yaml
index 4346fa402fc9..324fa182cd14 100644
--- linux-libre-6.8-gnu/Documentation/netlink/specs/tc.yaml
+++ linux-libre-6.9-rc6-gnu/Documentation/netlink/specs/tc.yaml
@@ -48,21 +48,28 @@ definitions:
       -
         name: bytes
         type: u64
+        doc: Number of enqueued bytes
       -
         name: packets
         type: u32
+        doc: Number of enqueued packets
       -
         name: drops
         type: u32
+        doc: Packets dropped because of lack of resources
       -
         name: overlimits
         type: u32
+        doc: |
+          Number of throttle events when this flow goes out of allocated bandwidth
       -
         name: bps
         type: u32
+        doc: Current flow byte rate
       -
         name: pps
         type: u32
+        doc: Current flow packet rate
       -
         name: qlen
         type: u32
@@ -112,6 +119,7 @@ definitions:
       -
         name: limit
         type: u32
+        doc: Queue length; bytes for bfifo, packets for pfifo
   -
     name: tc-htb-opt
     type: struct
@@ -119,11 +127,11 @@ definitions:
       -
         name: rate
         type: binary
-        len: 12
+        struct: tc-ratespec
       -
         name: ceil
         type: binary
-        len: 12
+        struct: tc-ratespec
       -
         name: buffer
         type: u32
@@ -149,15 +157,19 @@ definitions:
       -
         name: rate2quantum
         type: u32
+        doc: bps->quantum divisor
       -
         name: defcls
         type: u32
+        doc: Default class number
       -
         name: debug
         type: u32
+        doc: Debug flags
       -
         name: direct-pkts
         type: u32
+        doc: Count of non shaped packets
   -
     name: tc-gred-qopt
     type: struct
@@ -165,15 +177,19 @@ definitions:
       -
         name: limit
         type: u32
+        doc: HARD maximal queue length in bytes
       -
         name: qth-min
         type: u32
+        doc: Min average length threshold in bytes
       -
         name: qth-max
         type: u32
+        doc: Max average length threshold in bytes
       -
         name: DP
         type: u32
+        doc: Up to 2^32 DPs
       -
         name: backlog
         type: u32
@@ -195,15 +211,19 @@ definitions:
       -
         name: Wlog
         type: u8
+        doc: log(W)
       -
         name: Plog
         type: u8
+        doc: log(P_max / (qth-max - qth-min))
       -
         name: Scell_log
         type: u8
+        doc: cell size for idle damping
       -
         name: prio
         type: u8
+        doc: Priority of this VQ
       -
         name: packets
         type: u32
@@ -266,9 +286,11 @@ definitions:
       -
         name: bands
         type: u16
+        doc: Number of bands
       -
         name: max-bands
         type: u16
+        doc: Maximum number of queues
   -
     name: tc-netem-qopt
     type: struct
@@ -276,21 +298,138 @@ definitions:
       -
         name: latency
         type: u32
+        doc: Added delay in microseconds
       -
         name: limit
         type: u32
+        doc: Fifo limit in packets
       -
         name: loss
         type: u32
+        doc: Random packet loss (0=none, ~0=100%)
       -
         name: gap
         type: u32
+        doc: Re-ordering gap (0 for none)
       -
         name: duplicate
         type: u32
+        doc: Random packet duplication (0=none, ~0=100%)
       -
         name: jitter
         type: u32
+        doc: Random jitter latency in microseconds
+  -
+    name: tc-netem-gimodel
+    doc: State transition probabilities for 4 state model
+    type: struct
+    members:
+      -
+        name: p13
+        type: u32
+      -
+        name: p31
+        type: u32
+      -
+        name: p32
+        type: u32
+      -
+        name: p14
+        type: u32
+      -
+        name: p23
+        type: u32
+  -
+    name: tc-netem-gemodel
+    doc: Gilbert-Elliot models
+    type: struct
+    members:
+      -
+        name: p
+        type: u32
+      -
+        name: r
+        type: u32
+      -
+        name: h
+        type: u32
+      -
+        name: k1
+        type: u32
+  -
+    name: tc-netem-corr
+    type: struct
+    members:
+      -
+        name: delay-corr
+        type: u32
+        doc: Delay correlation
+      -
+        name: loss-corr
+        type: u32
+        doc: Packet loss correlation
+      -
+        name: dup-corr
+        type: u32
+        doc: Duplicate correlation
+  -
+    name: tc-netem-reorder
+    type: struct
+    members:
+      -
+        name: probability
+        type: u32
+      -
+        name: correlation
+        type: u32
+  -
+    name: tc-netem-corrupt
+    type: struct
+    members:
+      -
+        name: probability
+        type: u32
+      -
+        name: correlation
+        type: u32
+  -
+    name: tc-netem-rate
+    type: struct
+    members:
+      -
+        name: rate
+        type: u32
+      -
+        name: packet-overhead
+        type: s32
+      -
+        name: cell-size
+        type: u32
+      -
+        name: cell-overhead
+        type: s32
+  -
+    name: tc-netem-slot
+    type: struct
+    members:
+      -
+        name: min-delay
+        type: s64
+      -
+        name: max-delay
+        type: s64
+      -
+        name: max-packets
+        type: s32
+      -
+        name: max-bytes
+        type: s32
+      -
+        name: dist-delay
+        type: s64
+      -
+        name: dist-jitter
+        type: s64
   -
     name: tc-plug-qopt
     type: struct
@@ -307,11 +446,13 @@ definitions:
     members:
       -
         name: bands
-        type: u16
+        type: u32
+        doc: Number of bands
       -
         name: priomap
         type: binary
         len: 16
+        doc: Map of logical priority -> PRIO band
   -
     name: tc-red-qopt
     type: struct
@@ -319,21 +460,27 @@ definitions:
       -
         name: limit
         type: u32
+        doc: Hard queue length in packets
       -
         name: qth-min
         type: u32
+        doc: Min average threshold in packets
       -
         name: qth-max
         type: u32
+        doc: Max average threshold in packets
       -
         name: Wlog
         type: u8
+        doc: log(W)
       -
         name: Plog
         type: u8
+        doc: log(P_max / (qth-max - qth-min))
       -
         name: Scell-log
         type: u8
+        doc: Cell size for idle damping
       -
         name: flags
         type: u8
@@ -369,71 +516,128 @@ definitions:
         name: penalty-burst
         type: u32
   -
-    name: tc-sfq-qopt-v1 # TODO nested structs
+    name: tc-sfq-qopt
     type: struct
     members:
       -
         name: quantum
         type: u32
+        doc: Bytes per round allocated to flow
       -
         name: perturb-period
         type: s32
+        doc: Period of hash perturbation
       -
         name: limit
         type: u32
+        doc: Maximal packets in queue
       -
         name: divisor
         type: u32
+        doc: Hash divisor
       -
         name: flows
         type: u32
+        doc: Maximal number of flows
+  -
+    name: tc-sfqred-stats
+    type: struct
+    members:
+      -
+        name: prob-drop
+        type: u32
+        doc: Early drops, below max threshold
+      -
+        name: forced-drop
+        type: u32
+        doc: Early drops, after max threshold
+      -
+        name: prob-mark
+        type: u32
+        doc: Marked packets, below max threshold
+      -
+        name: forced-mark
+        type: u32
+        doc: Marked packets, after max threshold
+      -
+        name: prob-mark-head
+        type: u32
+        doc: Marked packets, below max threshold
+      -
+        name: forced-mark-head
+        type: u32
+        doc: Marked packets, after max threshold
+  -
+    name: tc-sfq-qopt-v1
+    type: struct
+    members:
+      -
+        name: v0
+        type: binary
+        struct: tc-sfq-qopt
       -
         name: depth
         type: u32
+        doc: Maximum number of packets per flow
       -
         name: headdrop
         type: u32
       -
         name: limit
         type: u32
+        doc: HARD maximal flow queue length in bytes
       -
         name: qth-min
         type: u32
+        doc: Min average length threshold in bytes
       -
-        name: qth-mac
+        name: qth-max
         type: u32
+        doc: Max average length threshold in bytes
       -
         name: Wlog
         type: u8
+        doc: log(W)
       -
         name: Plog
         type: u8
+        doc: log(P_max / (qth-max - qth-min))
       -
         name: Scell-log
         type: u8
+        doc: Cell size for idle damping
       -
         name: flags
         type: u8
       -
         name: max-P
         type: u32
+        doc: probabilty, high resolution
       -
-        name: prob-drop
-        type: u32
+        name: stats
+        type: binary
+        struct: tc-sfqred-stats
+  -
+    name: tc-ratespec
+    type: struct
+    members:
       -
-        name: forced-drop
-        type: u32
+        name: cell-log
+        type: u8
       -
-        name: prob-mark
-        type: u32
+        name: linklayer
+        type: u8
       -
-        name: forced-mark
-        type: u32
+        name: overhead
+        type: u8
       -
-        name: prob-mark-head
-        type: u32
+        name: cell-align
+        type: u8
       -
-        name: forced-mark-head
+        name: mpu
+        type: u8
+      -
+        name: rate
         type: u32
   -
     name: tc-tbf-qopt
@@ -441,12 +645,12 @@ definitions:
     members:
       -
         name: rate
-        type: binary # TODO nested struct tc_ratespec
-        len: 12
+        type: binary
+        struct: tc-ratespec
       -
         name: peakrate
-        type: binary # TODO nested struct tc_ratespec
-        len: 12
+        type: binary
+        struct: tc-ratespec
       -
         name: limit
         type: u32
@@ -491,67 +695,1299 @@ definitions:
       -
         name: interval
         type: s8
+        doc: Sampling period
+      -
+        name: ewma-log
+        type: u8
+        doc: The log() of measurement window weight
+  -
+    name: tc-choke-xstats
+    type: struct
+    members:
+      -
+        name: early
+        type: u32
+        doc: Early drops
+      -
+        name: pdrop
+        type: u32
+        doc: Drops due to queue limits
+      -
+        name: other
+        type: u32
+        doc: Drops due to drop() calls
+      -
+        name: marked
+        type: u32
+        doc: Marked packets
+      -
+        name: matched
+        type: u32
+        doc: Drops due to flow match
+  -
+    name: tc-codel-xstats
+    type: struct
+    members:
+      -
+        name: maxpacket
+        type: u32
+        doc: Largest packet we've seen so far
+      -
+        name: count
+        type: u32
+        doc: How many drops we've done since the last time we entered dropping state
+      -
+        name: lastcount
+        type: u32
+        doc: Count at entry to dropping state
+      -
+        name: ldelay
+        type: u32
+        doc: in-queue delay seen by most recently dequeued packet
+      -
+        name: drop-next
+        type: s32
+        doc: Time to drop next packet
+      -
+        name: drop-overlimit
+        type: u32
+        doc: Number of times max qdisc packet limit was hit
+      -
+        name: ecn-mark
+        type: u32
+        doc: Number of packets we've ECN marked instead of dropped
+      -
+        name: dropping
+        type: u32
+        doc: Are we in a dropping state?
+      -
+        name: ce-mark
+        type: u32
+        doc: Number of CE marked packets because of ce-threshold
+  -
+    name: tc-fq-codel-xstats
+    type: struct
+    members:
+      -
+        name: type
+        type: u32
+      -
+        name: maxpacket
+        type: u32
+        doc: Largest packet we've seen so far
+      -
+        name: drop-overlimit
+        type: u32
+        doc: Number of times max qdisc packet limit was hit
+      -
+        name: ecn-mark
+        type: u32
+        doc: Number of packets we ECN marked instead of being dropped
+      -
+        name: new-flow-count
+        type: u32
+        doc: Number of times packets created a new flow
+      -
+        name: new-flows-len
+        type: u32
+        doc: Count of flows in new list
+      -
+        name: old-flows-len
+        type: u32
+        doc: Count of flows in old list
+      -
+        name: ce-mark
+        type: u32
+        doc: Packets above ce-threshold
+      -
+        name: memory-usage
+        type: u32
+        doc: Memory usage in bytes
+      -
+        name: drop-overmemory
+        type: u32
+  -
+    name: tc-fq-pie-xstats
+    type: struct
+    members:
+      -
+        name: packets-in
+        type: u32
+        doc: Total number of packets enqueued
+      -
+        name: dropped
+        type: u32
+        doc: Packets dropped due to fq_pie_action
+      -
+        name: overlimit
+        type: u32
+        doc: Dropped due to lack of space in queue
+      -
+        name: overmemory
+        type: u32
+        doc: Dropped due to lack of memory in queue
+      -
+        name: ecn-mark
+        type: u32
+        doc: Packets marked with ecn
+      -
+        name: new-flow-count
+        type: u32
+        doc: Count of new flows created by packets
+      -
+        name: new-flows-len
+        type: u32
+        doc: Count of flows in new list
+      -
+        name: old-flows-len
+        type: u32
+        doc: Count of flows in old list
+      -
+        name: memory-usage
+        type: u32
+        doc: Total memory across all queues
+  -
+    name: tc-fq-qd-stats
+    type: struct
+    members:
+      -
+        name: gc-flows
+        type: u64
+      -
+        name: highprio-packets
+        type: u64
+        doc: obsolete
+      -
+        name: tcp-retrans
+        type: u64
+        doc: obsolete
+      -
+        name: throttled
+        type: u64
+      -
+        name: flows-plimit
+        type: u64
+      -
+        name: pkts-too-long
+        type: u64
+      -
+        name: allocation-errors
+        type: u64
+      -
+        name: time-next-delayed-flow
+        type: s64
+      -
+        name: flows
+        type: u32
+      -
+        name: inactive-flows
+        type: u32
+      -
+        name: throttled-flows
+        type: u32
+      -
+        name: unthrottle-latency-ns
+        type: u32
+      -
+        name: ce-mark
+        type: u64
+        doc: Packets above ce-threshold
+      -
+        name: horizon-drops
+        type: u64
+      -
+        name: horizon-caps
+        type: u64
+      -
+        name: fastpath-packets
+        type: u64
+      -
+        name: band-drops
+        type: binary
+        len: 24
+      -
+        name: band-pkt-count
+        type: binary
+        len: 12
+      -
+        name: pad
+        type: pad
+        len: 4
+  -
+    name: tc-hhf-xstats
+    type: struct
+    members:
+      -
+        name: drop-overlimit
+        type: u32
+        doc: Number of times max qdisc packet limit was hit
+      -
+        name: hh-overlimit
+        type: u32
+        doc: Number of times max heavy-hitters was hit
+      -
+        name: hh-tot-count
+        type: u32
+        doc: Number of captured heavy-hitters so far
+      -
+        name: hh-cur-count
+        type: u32
+        doc: Number of current heavy-hitters
+  -
+    name: tc-pie-xstats
+    type: struct
+    members:
+      -
+        name: prob
+        type: u64
+        doc: Current probability
+      -
+        name: delay
+        type: u32
+        doc: Current delay in ms
+      -
+        name: avg-dq-rate
+        type: u32
+        doc: Current average dq rate in bits/pie-time
+      -
+        name: dq-rate-estimating
+        type: u32
+        doc: Is avg-dq-rate being calculated?
+      -
+        name: packets-in
+        type: u32
+        doc: Total number of packets enqueued
+      -
+        name: dropped
+        type: u32
+        doc: Packets dropped due to pie action
+      -
+        name: overlimit
+        type: u32
+        doc: Dropped due to lack of space in queue
+      -
+        name: maxq
+        type: u32
+        doc: Maximum queue size
+      -
+        name: ecn-mark
+        type: u32
+        doc: Packets marked with ecn
+  -
+    name: tc-red-xstats
+    type: struct
+    members:
+      -
+        name: early
+        type: u32
+        doc: Early drops
+      -
+        name: pdrop
+        type: u32
+        doc: Drops due to queue limits
+      -
+        name: other
+        type: u32
+        doc: Drops due to drop() calls
+      -
+        name: marked
+        type: u32
+        doc: Marked packets
+  -
+    name: tc-sfb-xstats
+    type: struct
+    members:
+      -
+        name: earlydrop
+        type: u32
+      -
+        name: penaltydrop
+        type: u32
+      -
+        name: bucketdrop
+        type: u32
+      -
+        name: queuedrop
+        type: u32
+      -
+        name: childdrop
+        type: u32
+        doc: drops in child qdisc
+      -
+        name: marked
+        type: u32
+      -
+        name: maxqlen
+        type: u32
+      -
+        name: maxprob
+        type: u32
+      -
+        name: avgprob
+        type: u32
+  -
+    name: tc-sfq-xstats
+    type: struct
+    members:
+      -
+        name: allot
+        type: s32
+  -
+    name: gnet-stats-basic
+    type: struct
+    members:
+      -
+        name: bytes
+        type: u64
+      -
+        name: packets
+        type: u32
+  -
+    name: gnet-stats-rate-est
+    type: struct
+    members:
+      -
+        name: bps
+        type: u32
+      -
+        name: pps
+        type: u32
+  -
+    name: gnet-stats-rate-est64
+    type: struct
+    members:
+      -
+        name: bps
+        type: u64
+      -
+        name: pps
+        type: u64
+  -
+    name: gnet-stats-queue
+    type: struct
+    members:
+      -
+        name: qlen
+        type: u32
+      -
+        name: backlog
+        type: u32
+      -
+        name: drops
+        type: u32
+      -
+        name: requeues
+        type: u32
+      -
+        name: overlimits
+        type: u32
+  -
+    name: tc-u32-key
+    type: struct
+    members:
+      -
+        name: mask
+        type: u32
+        byte-order: big-endian
+      -
+        name: val
+        type: u32
+        byte-order: big-endian
+      -
+        name: "off"
+        type: s32
+      -
+        name: offmask
+        type: s32
+  -
+    name: tc-u32-sel
+    type: struct
+    members:
+      -
+        name: flags
+        type: u8
+      -
+        name: offshift
+        type: u8
+      -
+        name: nkeys
+        type: u8
+      -
+        name: offmask
+        type: u16
+        byte-order: big-endian
+      -
+        name: "off"
+        type: u16
+      -
+        name: offoff
+        type: s16
+      -
+        name: hoff
+        type: s16
+      -
+        name: hmask
+        type: u32
+        byte-order: big-endian
+      -
+        name: keys
+        type: binary
+        struct: tc-u32-key # TODO: array
+  -
+    name: tc-u32-pcnt
+    type: struct
+    members:
+      -
+        name: rcnt
+        type: u64
+      -
+        name: rhit
+        type: u64
+      -
+        name: kcnts
+        type: u64 # TODO: array
+  -
+    name: tcf-t
+    type: struct
+    members:
+      -
+        name: install
+        type: u64
+      -
+        name: lastuse
+        type: u64
+      -
+        name: expires
+        type: u64
+      -
+        name: firstuse
+        type: u64
+  -
+    name: tc-gen
+    type: struct
+    members:
+      -
+        name: index
+        type: u32
+      -
+        name: capab
+        type: u32
+      -
+        name: action
+        type: s32
+      -
+        name: refcnt
+        type: s32
+      -
+        name: bindcnt
+        type: s32
+  -
+    name: tc-gact-p
+    type: struct
+    members:
+      -
+        name: ptype
+        type: u16
+      -
+        name: pval
+        type: u16
+      -
+        name: paction
+        type: s32
+  -
+    name: tcf-ematch-tree-hdr
+    type: struct
+    members:
+      -
+        name: nmatches
+        type: u16
+      -
+        name: progid
+        type: u16
+  -
+    name: tc-basic-pcnt
+    type: struct
+    members:
+      -
+        name: rcnt
+        type: u64
+      -
+        name: rhit
+        type: u64
+  -
+    name: tc-matchall-pcnt
+    type: struct
+    members:
+      -
+        name: rhit
+        type: u64
+  -
+    name: tc-mpls
+    type: struct
+    members:
+      -
+        name: index
+        type: u32
+      -
+        name: capab
+        type: u32
+      -
+        name: action
+        type: s32
+      -
+        name: refcnt
+        type: s32
+      -
+        name: bindcnt
+        type: s32
+      -
+        name: m-action
+        type: s32
+  -
+    name: tc-police
+    type: struct
+    members:
+      -
+        name: index
+        type: u32
+      -
+        name: action
+        type: s32
+      -
+        name: limit
+        type: u32
+      -
+        name: burst
+        type: u32
+      -
+        name: mtu
+        type: u32
+      -
+        name: rate
+        type: binary
+        struct: tc-ratespec
+      -
+        name: peakrate
+        type: binary
+        struct: tc-ratespec
+      -
+        name: refcnt
+        type: s32
+      -
+        name: bindcnt
+        type: s32
+      -
+        name: capab
+        type: u32
+  -
+    name: tc-pedit-sel
+    type: struct
+    members:
+      -
+        name: index
+        type: u32
+      -
+        name: capab
+        type: u32
+      -
+        name: action
+        type: s32
+      -
+        name: refcnt
+        type: s32
+      -
+        name: bindcnt
+        type: s32
+      -
+        name: nkeys
+        type: u8
+      -
+        name: flags
+        type: u8
+      -
+        name: keys
+        type: binary
+        struct: tc-pedit-key # TODO: array
+  -
+    name: tc-pedit-key
+    type: struct
+    members:
+      -
+        name: mask
+        type: u32
+      -
+        name: val
+        type: u32
+      -
+        name: "off"
+        type: u32
+      -
+        name: at
+        type: u32
+      -
+        name: offmask
+        type: u32
+      -
+        name: shift
+        type: u32
+  -
+    name: tc-vlan
+    type: struct
+    members:
+      -
+        name: index
+        type: u32
+      -
+        name: capab
+        type: u32
+      -
+        name: action
+        type: s32
+      -
+        name: refcnt
+        type: s32
+      -
+        name: bindcnt
+        type: s32
+      -
+        name: v-action
+        type: s32
+attribute-sets:
+  -
+    name: tc-attrs
+    attributes:
+      -
+        name: kind
+        type: string
+      -
+        name: options
+        type: sub-message
+        sub-message: tc-options-msg
+        selector: kind
+      -
+        name: stats
+        type: binary
+        struct: tc-stats
+      -
+        name: xstats
+        type: sub-message
+        sub-message: tca-stats-app-msg
+        selector: kind
+      -
+        name: rate
+        type: binary
+        struct: gnet-estimator
+      -
+        name: fcnt
+        type: u32
+      -
+        name: stats2
+        type: nest
+        nested-attributes: tca-stats-attrs
+      -
+        name: stab
+        type: nest
+        nested-attributes: tca-stab-attrs
+      -
+        name: pad
+        type: pad
+      -
+        name: dump-invisible
+        type: flag
+      -
+        name: chain
+        type: u32
+      -
+        name: hw-offload
+        type: u8
+      -
+        name: ingress-block
+        type: u32
+      -
+        name: egress-block
+        type: u32
+      -
+        name: dump-flags
+        type: bitfield32
+      -
+        name: ext-warn-msg
+        type: string
+  -
+    name: tc-act-attrs
+    attributes:
+      -
+        name: kind
+        type: string
+      -
+        name: options
+        type: sub-message
+        sub-message: tc-act-options-msg
+        selector: kind
+      -
+        name: index
+        type: u32
+      -
+        name: stats
+        type: nest
+        nested-attributes: tc-act-stats-attrs
+      -
+        name: pad
+        type: pad
+      -
+        name: cookie
+        type: binary
+      -
+        name: flags
+        type: bitfield32
+      -
+        name: hw-stats
+        type: bitfield32
+      -
+        name: used-hw-stats
+        type: bitfield32
+      -
+        name: in-hw-count
+        type: u32
+  -
+    name: tc-act-stats-attrs
+    attributes:
+      -
+        name: basic
+        type: binary
+        struct: gnet-stats-basic
+      -
+        name: rate-est
+        type: binary
+        struct: gnet-stats-rate-est
+      -
+        name: queue
+        type: binary
+        struct: gnet-stats-queue
+      -
+        name: app
+        type: binary
+      -
+        name: rate-est64
+        type: binary
+        struct: gnet-stats-rate-est64
+      -
+        name: pad
+        type: pad
+      -
+        name: basic-hw
+        type: binary
+        struct: gnet-stats-basic
+      -
+        name: pkt64
+        type: u64
+  -
+    name: tc-act-bpf-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: ops-len
+        type: u16
+      -
+        name: ops
+        type: binary
+      -
+        name: fd
+        type: u32
+      -
+        name: name
+        type: string
+      -
+        name: pad
+        type: pad
+      -
+        name: tag
+        type: binary
+      -
+        name: id
+        type: binary
+  -
+    name: tc-act-connmark-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-csum-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-ct-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: action
+        type: u16
+      -
+        name: zone
+        type: u16
+      -
+        name: mark
+        type: u32
+      -
+        name: mark-mask
+        type: u32
+      -
+        name: labels
+        type: binary
+      -
+        name: labels-mask
+        type: binary
+      -
+        name: nat-ipv4-min
+        type: u32
+        byte-order: big-endian
+      -
+        name: nat-ipv4-max
+        type: u32
+        byte-order: big-endian
+      -
+        name: nat-ipv6-min
+        type: binary
+      -
+        name: nat-ipv6-max
+        type: binary
+      -
+        name: nat-port-min
+        type: u16
+        byte-order: big-endian
+      -
+        name: nat-port-max
+        type: u16
+        byte-order: big-endian
+      -
+        name: pad
+        type: pad
+      -
+        name: helper-name
+        type: string
+      -
+        name: helper-family
+        type: u8
+      -
+        name: helper-proto
+        type: u8
+  -
+    name: tc-act-ctinfo-attrs
+    attributes:
+      -
+        name: pad
+        type: pad
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: act
+        type: binary
+      -
+        name: zone
+        type: u16
+      -
+        name: parms-dscp-mask
+        type: u32
+      -
+        name: parms-dscp-statemask
+        type: u32
+      -
+        name: parms-cpmark-mask
+        type: u32
+      -
+        name: stats-dscp-set
+        type: u64
+      -
+        name: stats-dscp-error
+        type: u64
+      -
+        name: stats-cpmark-set
+        type: u64
+  -
+    name: tc-act-gate-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: pad
+        type: pad
+      -
+        name: priority
+        type: s32
+      -
+        name: entry-list
+        type: binary
+      -
+        name: base-time
+        type: u64
+      -
+        name: cycle-time
+        type: u64
+      -
+        name: cycle-time-ext
+        type: u64
+      -
+        name: flags
+        type: u32
+      -
+        name: clockid
+        type: s32
+  -
+    name: tc-act-ife-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: dmac
+        type: binary
+      -
+        name: smac
+        type: binary
+      -
+        name: type
+        type: u16
+      -
+        name: metalst
+        type: binary
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-mirred-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: pad
+        type: pad
+      -
+        name: blockid
+        type: binary
+  -
+    name: tc-act-mpls-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+        struct: tc-mpls
+      -
+        name: pad
+        type: pad
+      -
+        name: proto
+        type: u16
+        byte-order: big-endian
+      -
+        name: label
+        type: u32
+      -
+        name: tc
+        type: u8
+      -
+        name: ttl
+        type: u8
+      -
+        name: bos
+        type: u8
+  -
+    name: tc-act-nat-attrs
+    attributes:
+      -
+        name: parms
+        type: binary
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-pedit-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+        struct: tc-pedit-sel
+      -
+        name: pad
+        type: pad
+      -
+        name: parms-ex
+        type: binary
+      -
+        name: keys-ex
+        type: binary
+      -
+        name: key-ex
+        type: binary
+  -
+    name: tc-act-simple-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: data
+        type: binary
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-skbedit-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: priority
+        type: u32
+      -
+        name: queue-mapping
+        type: u16
+      -
+        name: mark
+        type: u32
+      -
+        name: pad
+        type: pad
+      -
+        name: ptype
+        type: u16
+      -
+        name: mask
+        type: u32
+      -
+        name: flags
+        type: u64
+      -
+        name: queue-mapping-max
+        type: u16
+  -
+    name: tc-act-skbmod-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: dmac
+        type: binary
+      -
+        name: smac
+        type: binary
+      -
+        name: etype
+        type: binary
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-tunnel-key-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+      -
+        name: enc-ipv4-src
+        type: u32
+        byte-order: big-endian
+      -
+        name: enc-ipv4-dst
+        type: u32
+        byte-order: big-endian
+      -
+        name: enc-ipv6-src
+        type: binary
+      -
+        name: enc-ipv6-dst
+        type: binary
+      -
+        name: enc-key-id
+        type: u64
+        byte-order: big-endian
+      -
+        name: pad
+        type: pad
+      -
+        name: enc-dst-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: no-csum
+        type: u8
+      -
+        name: enc-opts
+        type: binary
+      -
+        name: enc-tos
+        type: u8
+      -
+        name: enc-ttl
+        type: u8
+      -
+        name: no-frag
+        type: flag
+  -
+    name: tc-act-vlan-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+        struct: tc-vlan
       -
-        name: ewma-log
-        type: u8
-attribute-sets:
-  -
-    name: tc-attrs
-    attributes:
+        name: push-vlan-id
+        type: u16
       -
-        name: kind
-        type: string
+        name: push-vlan-protocol
+        type: u16
       -
-        name: options
-        type: sub-message
-        sub-message: tc-options-msg
-        selector: kind
+        name: pad
+        type: pad
       -
-        name: stats
-        type: binary
-        struct: tc-stats
+        name: push-vlan-priority
+        type: u8
       -
-        name: xstats
+        name: push-eth-dst
         type: binary
       -
-        name: rate
+        name: push-eth-src
         type: binary
-        struct: gnet-estimator
+  -
+    name: tc-basic-attrs
+    attributes:
       -
-        name: fcnt
+        name: classid
         type: u32
       -
-        name: stats2
+        name: ematches
         type: nest
-        nested-attributes: tca-stats-attrs
+        nested-attributes: tc-ematch-attrs
       -
-        name: stab
+        name: act
+        type: array-nest
+        nested-attributes: tc-act-attrs
+      -
+        name: police
         type: nest
-        nested-attributes: tca-stab-attrs
+        nested-attributes: tc-police-attrs
+      -
+        name: pcnt
+        type: binary
+        struct: tc-basic-pcnt
       -
         name: pad
         type: pad
+  -
+    name: tc-bpf-attrs
+    attributes:
       -
-        name: dump-invisible
-        type: flag
+        name: act
+        type: nest
+        nested-attributes: tc-act-attrs
       -
-        name: chain
+        name: police
+        type: nest
+        nested-attributes: tc-police-attrs
+      -
+        name: classid
         type: u32
       -
-        name: hw-offload
-        type: u8
+        name: ops-len
+        type: u16
       -
-        name: ingress-block
+        name: ops
+        type: binary
+      -
+        name: fd
         type: u32
       -
-        name: egress-block
+        name: name
+        type: string
+      -
+        name: flags
         type: u32
       -
-        name: dump-flags
-        type: bitfield32
+        name: flags-gen
+        type: u32
       -
-        name: ext-warn-msg
-        type: string
+        name: tag
+        type: binary
+      -
+        name: id
+        type: u32
   -
     name: tc-cake-attrs
     attributes:
@@ -641,7 +2077,8 @@ attribute-sets:
         type: u32
       -
         name: tin-stats
-        type: binary
+        type: array-nest
+        nested-attributes: tc-cake-tin-stats-attrs
       -
         name: deficit
         type: s32
@@ -660,6 +2097,84 @@ attribute-sets:
       -
         name: blue-timer-us
         type: s32
+  -
+    name: tc-cake-tin-stats-attrs
+    attributes:
+      -
+        name: pad
+        type: pad
+      -
+        name: sent-packets
+        type: u32
+      -
+        name: sent-bytes64
+        type: u64
+      -
+        name: dropped-packets
+        type: u32
+      -
+        name: dropped-bytes64
+        type: u64
+      -
+        name: acks-dropped-packets
+        type: u32
+      -
+        name: acks-dropped-bytes64
+        type: u64
+      -
+        name: ecn-marked-packets
+        type: u32
+      -
+        name: ecn-marked-bytes64
+        type: u64
+      -
+        name: backlog-packets
+        type: u32
+      -
+        name: backlog-bytes
+        type: u32
+      -
+        name: threshold-rate64
+        type: u64
+      -
+        name: target-us
+        type: u32
+      -
+        name: interval-us
+        type: u32
+      -
+        name: way-indirect-hits
+        type: u32
+      -
+        name: way-misses
+        type: u32
+      -
+        name: way-collisions
+        type: u32
+      -
+        name: peak-delay-us
+        type: u32
+      -
+        name: avg-delay-us
+        type: u32
+      -
+        name: base-delay-us
+        type: u32
+      -
+        name: sparse-flows
+        type: u32
+      -
+        name: bulk-flows
+        type: u32
+      -
+        name: unresponsive-flows
+        type: u32
+      -
+        name: max-skblen
+        type: u32
+      -
+        name: flow-quantum
+        type: u32
   -
     name: tc-cbs-attrs
     attributes:
@@ -667,6 +2182,20 @@ attribute-sets:
         name: parms
         type: binary
         struct: tc-cbs-qopt
+  -
+    name: tc-cgroup-attrs
+    attributes:
+      -
+        name: act
+        type: nest
+        nested-attributes: tc-act-attrs
+      -
+        name: police
+        type: nest
+        nested-attributes: tc-police-attrs
+      -
+        name: ematches
+        type: binary
   -
     name: tc-choke-attrs
     attributes:
@@ -677,6 +2206,9 @@ attribute-sets:
       -
         name: stab
         type: binary
+        checks:
+          min-len: 256
+          max-len: 256
       -
         name: max-p
         type: u32
@@ -704,6 +2236,56 @@ attribute-sets:
       -
         name: quantum
         type: u32
+  -
+    name: tc-ematch-attrs
+    attributes:
+      -
+        name: tree-hdr
+        type: binary
+        struct: tcf-ematch-tree-hdr
+      -
+        name: tree-list
+        type: binary
+  -
+    name: tc-flow-attrs
+    attributes:
+      -
+        name: keys
+        type: u32
+      -
+        name: mode
+        type: u32
+      -
+        name: baseclass
+        type: u32
+      -
+        name: rshift
+        type: u32
+      -
+        name: addend
+        type: u32
+      -
+        name: mask
+        type: u32
+      -
+        name: xor
+        type: u32
+      -
+        name: divisor
+        type: u32
+      -
+        name: act
+        type: binary
+      -
+        name: police
+        type: nest
+        nested-attributes: tc-police-attrs
+      -
+        name: ematches
+        type: binary
+      -
+        name: perturb
+        type: u32
   -
     name: tc-flower-attrs
     attributes:
@@ -953,15 +2535,19 @@ attribute-sets:
       -
         name: key-arp-sha
         type: binary
+        display-hint: mac
       -
         name: key-arp-sha-mask
         type: binary
+        display-hint: mac
       -
         name: key-arp-tha
         type: binary
+        display-hint: mac
       -
         name: key-arp-tha-mask
         type: binary
+        display-hint: mac
       -
         name: key-mpls-ttl
         type: u8
@@ -1020,10 +2606,12 @@ attribute-sets:
         type: u8
       -
         name: key-enc-opts
-        type: binary
+        type: nest
+        nested-attributes: tc-flower-key-enc-opts-attrs
       -
         name: key-enc-opts-mask
-        type: binary
+        type: nest
+        nested-attributes: tc-flower-key-enc-opts-attrs
       -
         name: in-hw-count
         type: u32
@@ -1056,41 +2644,165 @@ attribute-sets:
         name: key-ct-zone-mask
         type: u16
       -
-        name: key-ct-mark
-        type: u32
+        name: key-ct-mark
+        type: u32
+      -
+        name: key-ct-mark-mask
+        type: u32
+      -
+        name: key-ct-labels
+        type: binary
+      -
+        name: key-ct-labels-mask
+        type: binary
+      -
+        name: key-mpls-opts
+        type: nest
+        nested-attributes: tc-flower-key-mpls-opt-attrs
+      -
+        name: key-hash
+        type: u32
+      -
+        name: key-hash-mask
+        type: u32
+      -
+        name: key-num-of-vlans
+        type: u8
+      -
+        name: key-pppoe-sid
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-ppp-proto
+        type: u16
+        byte-order: big-endian
+      -
+        name: key-l2-tpv3-sid
+        type: u32
+        byte-order: big-endian
+      -
+        name: l2-miss
+        type: u8
+      -
+        name: key-cfm
+        type: nest
+        nested-attributes: tc-flower-key-cfm-attrs
+      -
+        name: key-spi
+        type: u32
+        byte-order: big-endian
+      -
+        name: key-spi-mask
+        type: u32
+        byte-order: big-endian
+  -
+    name: tc-flower-key-enc-opts-attrs
+    attributes:
+      -
+        name: geneve
+        type: nest
+        nested-attributes: tc-flower-key-enc-opt-geneve-attrs
+      -
+        name: vxlan
+        type: nest
+        nested-attributes: tc-flower-key-enc-opt-vxlan-attrs
+      -
+        name: erspan
+        type: nest
+        nested-attributes: tc-flower-key-enc-opt-erspan-attrs
+      -
+        name: gtp
+        type: nest
+        nested-attributes: tc-flower-key-enc-opt-gtp-attrs
+  -
+    name: tc-flower-key-enc-opt-geneve-attrs
+    attributes:
+      -
+        name: class
+        type: u16
+      -
+        name: type
+        type: u8
+      -
+        name: data
+        type: binary
+  -
+    name: tc-flower-key-enc-opt-vxlan-attrs
+    attributes:
+      -
+        name: gbp
+        type: u32
+  -
+    name: tc-flower-key-enc-opt-erspan-attrs
+    attributes:
+      -
+        name: ver
+        type: u8
+      -
+        name: index
+        type: u32
+      -
+        name: dir
+        type: u8
+      -
+        name: hwid
+        type: u8
+  -
+    name: tc-flower-key-enc-opt-gtp-attrs
+    attributes:
+      -
+        name: pdu-type
+        type: u8
+      -
+        name: qfi
+        type: u8
+  -
+    name: tc-flower-key-mpls-opt-attrs
+    attributes:
       -
-        name: key-ct-mark-mask
-        type: u32
+        name: lse-depth
+        type: u8
       -
-        name: key-ct-labels
-        type: binary
+        name: lse-ttl
+        type: u8
       -
-        name: key-ct-labels-mask
-        type: binary
+        name: lse-bos
+        type: u8
       -
-        name: key-mpls-opts
-        type: binary
+        name: lse-tc
+        type: u8
       -
-        name: key-hash
+        name: lse-label
         type: u32
+  -
+    name: tc-flower-key-cfm-attrs
+    attributes:
       -
-        name: key-hash-mask
-        type: u32
+        name: md-level
+        type: u8
       -
-        name: key-num-of-vlans
+        name: opcode
         type: u8
+  -
+    name: tc-fw-attrs
+    attributes:
       -
-        name: key-pppoe-sid
-        type: u16
-        byte-order: big-endian
+        name: classid
+        type: u32
       -
-        name: key-ppp-proto
-        type: u16
-        byte-order: big-endian
+        name: police
+        type: nest
+        nested-attributes: tc-police-attrs
       -
-        name: key-l2-tpv3-sid
+        name: indev
+        type: string
+      -
+        name: act
+        type: array-nest
+        nested-attributes: tc-act-attrs
+      -
+        name: mask
         type: u32
-        byte-order: big-endian
   -
     name: tc-gred-attrs
     attributes:
@@ -1135,7 +2847,7 @@ attribute-sets:
         type: u32
       -
         name: stat-bytes
-        type: u32
+        type: u64
       -
         name: stat-packets
         type: u32
@@ -1232,40 +2944,25 @@ attribute-sets:
         name: offload
         type: flag
   -
-    name: tc-act-attrs
+    name: tc-matchall-attrs
     attributes:
       -
-        name: kind
-        type: string
+        name: classid
+        type: u32
       -
-        name: options
-        type: sub-message
-        sub-message: tc-act-options-msg
-        selector: kind
+        name: act
+        type: array-nest
+        nested-attributes: tc-act-attrs
       -
-        name: index
+        name: flags
         type: u32
       -
-        name: stats
+        name: pcnt
         type: binary
+        struct: tc-matchall-pcnt
       -
         name: pad
         type: pad
-      -
-        name: cookie
-        type: binary
-      -
-        name: flags
-        type: bitfield32
-      -
-        name: hw-stats
-        type: bitfield32
-      -
-        name: used-hw-stats
-        type: bitfield32
-      -
-        name: in-hw-count
-        type: u32
   -
     name: tc-etf-attrs
     attributes:
@@ -1304,48 +3001,71 @@ attribute-sets:
       -
         name: plimit
         type: u32
+        doc: Limit of total number of packets in queue
       -
         name: flow-plimit
         type: u32
+        doc: Limit of packets per flow
       -
         name: quantum
         type: u32
+        doc: RR quantum
       -
         name: initial-quantum
         type: u32
+        doc: RR quantum for new flow
       -
         name: rate-enable
         type: u32
+        doc: Enable / disable rate limiting
       -
         name: flow-default-rate
         type: u32
+        doc: Obsolete, do not use
       -
         name: flow-max-rate
         type: u32
+        doc: Per flow max rate
       -
         name: buckets-log
         type: u32
+        doc: log2(number of buckets)
       -
         name: flow-refill-delay
         type: u32
+        doc: Flow credit refill delay in usec
       -
         name: orphan-mask
         type: u32
+        doc: Mask applied to orphaned skb hashes
       -
         name: low-rate-threshold
         type: u32
+        doc: Per packet delay under this rate
       -
         name: ce-threshold
         type: u32
+        doc: DCTCP-like CE marking threshold
       -
         name: timer-slack
         type: u32
       -
         name: horizon
         type: u32
+        doc: Time horizon in usec
       -
         name: horizon-drop
         type: u8
+        doc: Drop packets beyond horizon, or cap their EDT
+      -
+        name: priomap
+        type: binary
+        struct: tc-prio-qopt
+      -
+        name: weights
+        type: binary
+        sub-type: s32
+        doc: Weights for each band
   -
     name: tc-fq-codel-attrs
     attributes:
@@ -1427,6 +3147,7 @@ attribute-sets:
       -
         name: corr
         type: binary
+        struct: tc-netem-corr
       -
         name: delay-dist
         type: binary
@@ -1434,15 +3155,19 @@ attribute-sets:
       -
         name: reorder
         type: binary
+        struct: tc-netem-reorder
       -
         name: corrupt
         type: binary
+        struct: tc-netem-corrupt
       -
         name: loss
-        type: binary
+        type: nest
+        nested-attributes: tc-netem-loss-attrs
       -
         name: rate
         type: binary
+        struct: tc-netem-rate
       -
         name: ecn
         type: u32
@@ -1461,10 +3186,27 @@ attribute-sets:
       -
         name: slot
         type: binary
+        struct: tc-netem-slot
       -
         name: slot-dist
         type: binary
         sub-type: s16
+      -
+        name: prng-seed
+        type: u64
+  -
+    name: tc-netem-loss-attrs
+    attributes:
+      -
+        name: gi
+        type: binary
+        doc: General Intuitive - 4 state model
+        struct: tc-netem-gimodel
+      -
+        name: ge
+        type: binary
+        doc: Gilbert Elliot models
+        struct: tc-netem-gemodel
   -
     name: tc-pie-attrs
     attributes:
@@ -1492,6 +3234,44 @@ attribute-sets:
       -
         name: dq-rate-estimator
         type: u32
+  -
+    name: tc-police-attrs
+    attributes:
+      -
+        name: tbf
+        type: binary
+        struct: tc-police
+      -
+        name: rate
+        type: binary
+      -
+        name: peakrate
+        type: binary
+      -
+        name: avrate
+        type: u32
+      -
+        name: result
+        type: u32
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: pad
+        type: pad
+      -
+        name: rate64
+        type: u64
+      -
+        name: peakrate64
+        type: u64
+      -
+        name: pktrate64
+        type: u64
+      -
+        name: pktburst64
+        type: u64
   -
     name: tc-qfq-attrs
     attributes:
@@ -1516,13 +3296,36 @@ attribute-sets:
         type: u32
       -
         name: flags
-        type: binary
+        type: bitfield32
       -
         name: early-drop-block
         type: u32
       -
         name: mark-block
         type: u32
+  -
+    name: tc-route-attrs
+    attributes:
+      -
+        name: classid
+        type: u32
+      -
+        name: to
+        type: u32
+      -
+        name: from
+        type: u32
+      -
+        name: iif
+        type: u32
+      -
+        name: police
+        type: nest
+        nested-attributes: tc-police-attrs
+      -
+        name: act
+        type: array-nest
+        nested-attributes: tc-act-attrs
   -
     name: tc-taprio-attrs
     attributes:
@@ -1573,6 +3376,7 @@ attribute-sets:
         name: entry
         type: nest
         nested-attributes: tc-taprio-sched-entry
+        multi-attr: true
   -
     name: tc-taprio-sched-entry
     attributes:
@@ -1629,17 +3433,43 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tca-gact-attrs
+    name: tc-act-sample-attrs
+    attributes:
+      -
+        name: tm
+        type: binary
+        struct: tcf-t
+      -
+        name: parms
+        type: binary
+        struct: tc-gen
+      -
+        name: rate
+        type: u32
+      -
+        name: trunc-size
+        type: u32
+      -
+        name: psample-group
+        type: u32
+      -
+        name: pad
+        type: pad
+  -
+    name: tc-act-gact-attrs
     attributes:
       -
         name: tm
         type: binary
+        struct: tcf-t
       -
         name: parms
         type: binary
+        struct: tc-gen
       -
         name: prob
         type: binary
+        struct: tc-gact-p
       -
         name: pad
         type: pad
@@ -1659,34 +3489,89 @@ attribute-sets:
       -
         name: basic
         type: binary
+        struct: gnet-stats-basic
       -
         name: rate-est
         type: binary
+        struct: gnet-stats-rate-est
       -
         name: queue
         type: binary
+        struct: gnet-stats-queue
       -
         name: app
-        type: binary # TODO sub-message needs 2+ level deep lookup
+        type: sub-message
         sub-message: tca-stats-app-msg
         selector: kind
       -
         name: rate-est64
         type: binary
+        struct: gnet-stats-rate-est64
       -
         name: pad
         type: pad
       -
         name: basic-hw
         type: binary
+        struct: gnet-stats-basic
       -
         name: pkt64
+        type: u64
+  -
+    name: tc-u32-attrs
+    attributes:
+      -
+        name: classid
+        type: u32
+      -
+        name: hash
+        type: u32
+      -
+        name: link
+        type: u32
+      -
+        name: divisor
+        type: u32
+      -
+        name: sel
+        type: binary
+        struct: tc-u32-sel
+      -
+        name: police
+        type: nest
+        nested-attributes: tc-police-attrs
+      -
+        name: act
+        type: array-nest
+        nested-attributes: tc-act-attrs
+      -
+        name: indev
+        type: string
+      -
+        name: pcnt
+        type: binary
+        struct: tc-u32-pcnt
+      -
+        name: mark
         type: binary
+        struct: tc-u32-mark
+      -
+        name: flags
+        type: u32
+      -
+        name: pad
+        type: pad
 
 sub-messages:
   -
     name: tc-options-msg
     formats:
+      -
+        value: basic
+        attribute-set: tc-basic-attrs
+      -
+        value: bpf
+        attribute-set: tc-bpf-attrs
       -
         value: bfifo
         fixed-header: tc-fifo-qopt
@@ -1696,6 +3581,9 @@ sub-messages:
       -
         value: cbs
         attribute-set: tc-cbs-attrs
+      -
+        value: cgroup
+        attribute-set: tc-cgroup-attrs
       -
         value: choke
         attribute-set: tc-choke-attrs
@@ -1713,6 +3601,12 @@ sub-messages:
       -
         value: ets
         attribute-set: tc-ets-attrs
+      -
+        value: flow
+        attribute-set: tc-flow-attrs
+      -
+        value: flower
+        attribute-set: tc-flower-attrs
       -
         value: fq
         attribute-set: tc-fq-attrs
@@ -1723,8 +3617,8 @@ sub-messages:
         value: fq_pie
         attribute-set: tc-fq-pie-attrs
       -
-        value: flower
-        attribute-set: tc-flower-attrs
+        value: fw
+        attribute-set: tc-fw-attrs
       -
         value: gred
         attribute-set: tc-gred-attrs
@@ -1739,6 +3633,9 @@ sub-messages:
         attribute-set: tc-htb-attrs
       -
         value: ingress # no content
+      -
+        value: matchall
+        attribute-set: tc-matchall-attrs
       -
         value: mq # no content
       -
@@ -1775,6 +3672,9 @@ sub-messages:
       -
         value: red
         attribute-set: tc-red-attrs
+      -
+        value: route
+        attribute-set: tc-route-attrs
       -
         value: sfb
         fixed-header: tc-sfb-qopt
@@ -1787,88 +3687,105 @@ sub-messages:
       -
         value: tbf
         attribute-set: tc-tbf-attrs
-  -
-    name: tc-act-options-msg
-    formats:
       -
-        value: gact
-        attribute-set: tca-gact-attrs
+        value: u32
+        attribute-set: tc-u32-attrs
   -
-    name: tca-stats-app-msg
+    name: tc-act-options-msg
     formats:
       -
-        value: bfifo
-      -
-        value: blackhole
+        value: bpf
+        attribute-set: tc-act-bpf-attrs
       -
-        value: cake
-        attribute-set: tc-cake-stats-attrs
+        value: connmark
+        attribute-set: tc-act-connmark-attrs
       -
-        value: cbs
+        value: csum
+        attribute-set: tc-act-csum-attrs
       -
-        value: choke
+        value: ct
+        attribute-set: tc-act-ct-attrs
       -
-        value: clsact
+        value: ctinfo
+        attribute-set: tc-act-ctinfo-attrs
       -
-        value: codel
+        value: gact
+        attribute-set: tc-act-gact-attrs
       -
-        value: drr
+        value: gate
+        attribute-set: tc-act-gate-attrs
       -
-        value: etf
+        value: ife
+        attribute-set: tc-act-ife-attrs
       -
-        value: ets
+        value: mirred
+        attribute-set: tc-act-mirred-attrs
       -
-        value: fq
+        value: mpls
+        attribute-set: tc-act-mpls-attrs
       -
-        value: fq_codel
+        value: nat
+        attribute-set: tc-act-nat-attrs
       -
-        value: fq_pie
+        value: pedit
+        attribute-set: tc-act-pedit-attrs
       -
-        value: flower
+        value: police
+        attribute-set: tc-act-police-attrs
       -
-        value: gred
+        value: sample
+        attribute-set: tc-act-sample-attrs
       -
-        value: hfsc
+        value: simple
+        attribute-set: tc-act-simple-attrs
       -
-        value: hhf
+        value: skbedit
+        attribute-set: tc-act-skbedit-attrs
       -
-        value: htb
+        value: skbmod
+        attribute-set: tc-act-skbmod-attrs
       -
-        value: ingress
+        value: tunnel_key
+        attribute-set: tc-act-tunnel-key-attrs
       -
-        value: mq
+        value: vlan
+        attribute-set: tc-act-vlan-attrs
+  -
+    name: tca-stats-app-msg
+    formats:
       -
-        value: mqprio
+        value: cake
+        attribute-set: tc-cake-stats-attrs
       -
-        value: multiq
+        value: choke
+        fixed-header: tc-choke-xstats
       -
-        value: netem
+        value: codel
+        fixed-header: tc-codel-xstats
       -
-        value: noqueue
+        value: fq
+        fixed-header: tc-fq-qd-stats
       -
-        value: pfifo
+        value: fq_codel
+        fixed-header: tc-fq-codel-xstats
       -
-        value: pfifo_fast
+        value: fq_pie
+        fixed-header: tc-fq-pie-xstats
       -
-        value: pfifo_head_drop
+        value: hhf
+        fixed-header: tc-hhf-xstats
       -
         value: pie
-      -
-        value: plug
-      -
-        value: prio
-      -
-        value: qfq
+        fixed-header: tc-pie-xstats
       -
         value: red
+        fixed-header: tc-red-xstats
       -
         value: sfb
+        fixed-header: tc-sfb-xstats
       -
         value: sfq
-      -
-        value: taprio
-      -
-        value: tbf
+        fixed-header: tc-sfq-xstats
 
 operations:
   enum-model: directional
diff --git linux-libre-6.8-gnu/Documentation/networking/af_xdp.rst linux-libre-6.9-rc6-gnu/Documentation/networking/af_xdp.rst
index dceeb0d763aa..72da7057e4cf 100644
--- linux-libre-6.8-gnu/Documentation/networking/af_xdp.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/af_xdp.rst
@@ -329,23 +329,24 @@ XDP_SHARED_UMEM option and provide the initial socket's fd in the
 sxdp_shared_umem_fd field as you registered the UMEM on that
 socket. These two sockets will now share one and the same UMEM.
 
-There is no need to supply an XDP program like the one in the previous
-case where sockets were bound to the same queue id and
-device. Instead, use the NIC's packet steering capabilities to steer
-the packets to the right queue. In the previous example, there is only
-one queue shared among sockets, so the NIC cannot do this steering. It
-can only steer between queues.
-
-In libbpf, you need to use the xsk_socket__create_shared() API as it
-takes a reference to a FILL ring and a COMPLETION ring that will be
-created for you and bound to the shared UMEM. You can use this
-function for all the sockets you create, or you can use it for the
-second and following ones and use xsk_socket__create() for the first
-one. Both methods yield the same result.
+In this case, it is possible to use the NIC's packet steering
+capabilities to steer the packets to the right queue. This is not
+possible in the previous example as there is only one queue shared
+among sockets, so the NIC cannot do this steering as it can only steer
+between queues.
+
+In libxdp (or libbpf prior to version 1.0), you need to use the
+xsk_socket__create_shared() API as it takes a reference to a FILL ring
+and a COMPLETION ring that will be created for you and bound to the
+shared UMEM. You can use this function for all the sockets you create,
+or you can use it for the second and following ones and use
+xsk_socket__create() for the first one. Both methods yield the same
+result.
 
 Note that a UMEM can be shared between sockets on the same queue id
 and device, as well as between queues on the same device and between
-devices at the same time.
+devices at the same time. It is also possible to redirect to any
+socket as long as it is bound to the same umem with XDP_SHARED_UMEM.
 
 XDP_USE_NEED_WAKEUP bind flag
 -----------------------------
@@ -822,6 +823,10 @@ A: The short answer is no, that is not supported at the moment. The
    switch, or other distribution mechanism, in your NIC to direct
    traffic to the correct queue id and socket.
 
+   Note that if you are using the XDP_SHARED_UMEM option, it is
+   possible to switch traffic between any socket bound to the same
+   umem.
+
 Q: My packets are sometimes corrupted. What is wrong?
 
 A: Care has to be taken not to feed the same buffer in the UMEM into
diff --git linux-libre-6.8-gnu/Documentation/networking/bonding.rst linux-libre-6.9-rc6-gnu/Documentation/networking/bonding.rst
index f7a73421eb76..e774b48de9f5 100644
--- linux-libre-6.8-gnu/Documentation/networking/bonding.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/bonding.rst
@@ -444,6 +444,18 @@ arp_missed_max
 
 	The default value is 2, and the allowable range is 1 - 255.
 
+coupled_control
+
+    Specifies whether the LACP state machine's MUX in the 802.3ad mode
+    should have separate Collecting and Distributing states.
+
+    This is by implementing the independent control state machine per
+    IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control
+    state machine.
+
+    The default value is 1. This setting does not separate the Collecting
+    and Distributing states, maintaining the bond in coupled control.
+
 downdelay
 
 	Specifies the time, in milliseconds, to wait before disabling
diff --git linux-libre-6.8-gnu/Documentation/networking/bridge.rst linux-libre-6.9-rc6-gnu/Documentation/networking/bridge.rst
index ba14e7b07869..ef8b73e157b2 100644
--- linux-libre-6.8-gnu/Documentation/networking/bridge.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/bridge.rst
@@ -324,7 +324,7 @@ Contact Info
 The code is currently maintained by Roopa Prabhu <roopa@nvidia.com> and
 Nikolay Aleksandrov <razor@blackwall.org>. Bridge bugs and enhancements
 are discussed on the linux-netdev mailing list netdev@vger.kernel.org and
-bridge@lists.linux-foundation.org.
+bridge@lists.linux.dev.
 
 The list is open to anyone interested: http://vger.kernel.org/vger-lists.html#netdev
 
diff --git linux-libre-6.8-gnu/Documentation/networking/can.rst linux-libre-6.9-rc6-gnu/Documentation/networking/can.rst
index d7e1ada905b2..62519d38c58b 100644
--- linux-libre-6.8-gnu/Documentation/networking/can.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/can.rst
@@ -444,6 +444,24 @@ definitions are specified for CAN specific MTUs in include/linux/can.h:
   #define CANFD_MTU (sizeof(struct canfd_frame)) == 72  => CAN FD frame
 
 
+Returned Message Flags
+----------------------
+
+When using the system call recvmsg(2) on a RAW or a BCM socket, the
+msg->msg_flags field may contain the following flags:
+
+MSG_DONTROUTE:
+	set when the received frame was created on the local host.
+
+MSG_CONFIRM:
+	set when the frame was sent via the socket it is received on.
+	This flag can be interpreted as a 'transmission confirmation' when the
+	CAN driver supports the echo of frames on driver level, see
+	:ref:`socketcan-local-loopback1` and :ref:`socketcan-local-loopback2`.
+	(Note: In order to receive such messages on a RAW socket,
+	CAN_RAW_RECV_OWN_MSGS must be set.)
+
+
 .. _socketcan-raw-sockets:
 
 RAW Protocol Sockets with can_filters (SOCK_RAW)
@@ -693,22 +711,6 @@ where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or
 CAN ID ranges from the incoming traffic.
 
 
-RAW Socket Returned Message Flags
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-When using recvmsg() call, the msg->msg_flags may contain following flags:
-
-MSG_DONTROUTE:
-	set when the received frame was created on the local host.
-
-MSG_CONFIRM:
-	set when the frame was sent via the socket it is received on.
-	This flag can be interpreted as a 'transmission confirmation' when the
-	CAN driver supports the echo of frames on driver level, see
-	:ref:`socketcan-local-loopback1` and :ref:`socketcan-local-loopback2`.
-	In order to receive such messages, CAN_RAW_RECV_OWN_MSGS must be set.
-
-
 Broadcast Manager Protocol Sockets (SOCK_DGRAM)
 -----------------------------------------------
 
diff --git linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index b842bcb14255..a4c7d0c65fd7 100644
--- linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -211,10 +211,16 @@ Documentation/networking/net_dim.rst
 
 RX copybreak
 ============
+
 The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
 and can be configured by the ETHTOOL_STUNABLE command of the
 SIOCETHTOOL ioctl.
 
+This option controls the maximum packet length for which the RX
+descriptor it was received on would be recycled. When a packet smaller
+than RX copybreak bytes is received, it is copied into a new memory
+buffer and the RX descriptor is returned to HW.
+
 Statistics
 ==========
 
diff --git linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/index.rst linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/index.rst
index 43de285b8a92..6932d8c043c2 100644
--- linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/index.rst
@@ -42,6 +42,7 @@ Contents:
    intel/ice
    marvell/octeontx2
    marvell/octeon_ep
+   marvell/octeon_ep_vf
    mellanox/mlx5/index
    microsoft/netvsc
    neterion/s2io
diff --git linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst
index 9ba2ed79c78f..4c004162ae70 100644
--- linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/intel/ice.rst
@@ -297,15 +297,28 @@ more options for Receive Side Scaling (RSS) hash byte configuration.
   # ethtool -N <ethX> rx-flow-hash <type> <option>
 
   Where <type> is:
-    tcp4  signifying TCP over IPv4
-    udp4  signifying UDP over IPv4
-    tcp6  signifying TCP over IPv6
-    udp6  signifying UDP over IPv6
+    tcp4    signifying TCP over IPv4
+    udp4    signifying UDP over IPv4
+    gtpc4   signifying GTP-C over IPv4
+    gtpc4t  signifying GTP-C (include TEID) over IPv4
+    gtpu4   signifying GTP-U over IPV4
+    gtpu4e  signifying GTP-U and Extension Header over IPV4
+    gtpu4u  signifying GTP-U PSC Uplink over IPV4
+    gtpu4d  signifying GTP-U PSC Downlink over IPV4
+    tcp6    signifying TCP over IPv6
+    udp6    signifying UDP over IPv6
+    gtpc6   signifying GTP-C over IPv6
+    gtpc6t  signifying GTP-C (include TEID) over IPv6
+    gtpu6   signifying GTP-U over IPV6
+    gtpu6e  signifying GTP-U and Extension Header over IPV6
+    gtpu6u  signifying GTP-U PSC Uplink over IPV6
+    gtpu6d  signifying GTP-U PSC Downlink over IPV6
   And <option> is one or more of:
     s     Hash on the IP source address of the Rx packet.
     d     Hash on the IP destination address of the Rx packet.
     f     Hash on bytes 0 and 1 of the Layer 4 header of the Rx packet.
     n     Hash on bytes 2 and 3 of the Layer 4 header of the Rx packet.
+    e     Hash on GTP Packet on TEID (4bytes) of the Rx packet.
 
 
 Accelerated Receive Flow Steering (aRFS)
diff --git linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
new file mode 100644
index 000000000000..603133d0b92f
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+=======================================================================
+Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC VF
+=======================================================================
+
+Network driver for Marvell's Octeon PCI EndPoint NIC VF.
+Copyright (c) 2020 Marvell International Ltd.
+
+Overview
+========
+This driver implements networking functionality of Marvell's Octeon PCI
+EndPoint NIC VF.
+
+Supported Devices
+=================
+Currently, this driver support following devices:
+ * Network controller: Cavium, Inc. Device b203
+ * Network controller: Cavium, Inc. Device b403
+ * Network controller: Cavium, Inc. Device b103
+ * Network controller: Cavium, Inc. Device b903
+ * Network controller: Cavium, Inc. Device ba03
+ * Network controller: Cavium, Inc. Device bc03
+ * Network controller: Cavium, Inc. Device bd03
diff --git linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
index 6ec7d686efab..05fe2b11bb18 100644
--- linux-libre-6.8-gnu/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
@@ -99,6 +99,12 @@ Minimal SR-IOV support is currently offered and can be enabled by setting
 the sysfs 'sriov_numvfs' value, if supported by your particular firmware
 configuration.
 
+XDP
+---
+
+Support for XDP includes the basics, plus Jumbo frames, Redirect and
+ndo_xmit.  There is no current support for zero-copy sockets or HW offload.
+
 Statistics
 ==========
 
@@ -138,6 +144,12 @@ Driver port specific::
      rx_csum_none: 0
      rx_csum_complete: 3
      rx_csum_error: 0
+     xdp_drop: 0
+     xdp_aborted: 0
+     xdp_pass: 0
+     xdp_tx: 0
+     xdp_redirect: 0
+     xdp_frames: 0
 
 Driver queue specific::
 
@@ -149,9 +161,12 @@ Driver queue specific::
      tx_0_frags: 0
      tx_0_tso: 0
      tx_0_tso_bytes: 0
+     tx_0_hwstamp_valid: 0
+     tx_0_hwstamp_invalid: 0
      tx_0_csum_none: 3
      tx_0_csum: 0
      tx_0_vlan_inserted: 0
+     tx_0_xdp_frames: 0
      rx_0_pkts: 2
      rx_0_bytes: 120
      rx_0_dma_map_err: 0
@@ -159,8 +174,15 @@ Driver queue specific::
      rx_0_csum_none: 0
      rx_0_csum_complete: 0
      rx_0_csum_error: 0
+     rx_0_hwstamp_valid: 0
+     rx_0_hwstamp_invalid: 0
      rx_0_dropped: 0
      rx_0_vlan_stripped: 0
+     rx_0_xdp_drop: 0
+     rx_0_xdp_aborted: 0
+     rx_0_xdp_pass: 0
+     rx_0_xdp_tx: 0
+     rx_0_xdp_redirect: 0
 
 Firmware port specific::
 
diff --git linux-libre-6.8-gnu/Documentation/networking/device_drivers/wwan/t7xx.rst linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/wwan/t7xx.rst
index dd5b731957ca..f346f5f85f15 100644
--- linux-libre-6.8-gnu/Documentation/networking/device_drivers/wwan/t7xx.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/device_drivers/wwan/t7xx.rst
@@ -39,6 +39,34 @@ command and receive response:
 
 - open the AT control channel using a UART tool or a special user tool
 
+Sysfs
+=====
+The driver provides sysfs interfaces to userspace.
+
+t7xx_mode
+---------
+The sysfs interface provides userspace with access to the device mode, this interface
+supports read and write operations.
+
+Device mode:
+
+- ``unknown`` represents that device in unknown status
+- ``ready`` represents that device in ready status
+- ``reset`` represents that device in reset status
+- ``fastboot_switching`` represents that device in fastboot switching status
+- ``fastboot_download`` represents that device in fastboot download status
+- ``fastboot_dump`` represents that device in fastboot dump status
+
+Read from userspace to get the current device mode.
+
+::
+  $ cat /sys/bus/pci/devices/${bdf}/t7xx_mode
+
+Write from userspace to set the device mode.
+
+::
+  $ echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode
+
 Management application development
 ==================================
 The driver and userspace interfaces are described below. The MBIM protocol is
@@ -97,6 +125,20 @@ The driver exposes an AT port by implementing AT WWAN Port.
 The userspace end of the control port is a /dev/wwan0at0 character
 device. Application shall use this interface to issue AT commands.
 
+fastboot port userspace ABI
+---------------------------
+
+/dev/wwan0fastboot0 character device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver exposes a fastboot protocol interface by implementing
+fastboot WWAN Port. The userspace end of the fastboot channel pipe is a
+/dev/wwan0fastboot0 character device. Application shall use this interface for
+fastboot protocol communication.
+
+Please note that driver needs to be reloaded to export /dev/wwan0fastboot0
+port, because device needs a cold reset after enter ``fastboot_switching``
+mode.
+
 The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification.
 
 References
@@ -118,3 +160,7 @@ speak the Mobile Interface Broadband Model (MBIM) protocol"*
 [4] *Specification # 27.007 - 3GPP*
 
 - https://www.3gpp.org/DynaReport/27007.htm
+
+[5] *fastboot "a mechanism for communicating with bootloaders"*
+
+- https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md
diff --git linux-libre-6.8-gnu/Documentation/networking/devlink/devlink-eswitch-attr.rst linux-libre-6.9-rc6-gnu/Documentation/networking/devlink/devlink-eswitch-attr.rst
new file mode 100644
index 000000000000..08bb39ab1528
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/devlink/devlink-eswitch-attr.rst
@@ -0,0 +1,76 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Devlink E-Switch Attribute
+==========================
+
+Devlink E-Switch supports two modes of operation: legacy and switchdev.
+Legacy mode operates based on traditional MAC/VLAN steering rules. Switching
+decisions are made based on MAC addresses, VLANs, etc. There is limited ability
+to offload switching rules to hardware.
+
+On the other hand, switchdev mode allows for more advanced offloading
+capabilities of the E-Switch to hardware. In switchdev mode, more switching
+rules and logic can be offloaded to the hardware switch ASIC. It enables
+representor netdevices that represent the slow path of virtual functions (VFs)
+or scalable-functions (SFs) of the device. See more information about
+:ref:`Documentation/networking/switchdev.rst <switchdev>` and
+:ref:`Documentation/networking/representors.rst <representors>`.
+
+In addition, the devlink E-Switch also comes with other attributes listed
+in the following section.
+
+Attributes Description
+======================
+
+The following is a list of E-Switch attributes.
+
+.. list-table:: E-Switch attributes
+   :widths: 8 5 45
+
+   * - Name
+     - Type
+     - Description
+   * - ``mode``
+     - enum
+     - The mode of the device. The mode can be one of the following:
+
+       * ``legacy`` operates based on traditional MAC/VLAN steering
+         rules.
+       * ``switchdev`` allows for more advanced offloading capabilities of
+         the E-Switch to hardware.
+   * - ``inline-mode``
+     - enum
+     - Some HWs need the VF driver to put part of the packet
+       headers on the TX descriptor so the e-switch can do proper
+       matching and steering. Support for both switchdev mode and legacy mode.
+
+       * ``none`` none.
+       * ``link`` L2 mode.
+       * ``network`` L3 mode.
+       * ``transport`` L4 mode.
+   * - ``encap-mode``
+     - enum
+     - The encapsulation mode of the device. Support for both switchdev mode
+       and legacy mode. The mode can be one of the following:
+
+       * ``none`` Disable encapsulation support.
+       * ``basic`` Enable encapsulation support.
+
+Example Usage
+=============
+
+.. code:: shell
+
+    # enable switchdev mode
+    $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
+
+    # set inline-mode and encap-mode
+    $ devlink dev eswitch set pci/0000:08:00.0 inline-mode none encap-mode basic
+
+    # display devlink device eswitch attributes
+    $ devlink dev eswitch show pci/0000:08:00.0
+      pci/0000:08:00.0: mode switchdev inline-mode none encap-mode basic
+
+    # enable encap-mode with legacy mode
+    $ devlink dev eswitch set pci/0000:08:00.0 mode legacy inline-mode none encap-mode basic
diff --git linux-libre-6.8-gnu/Documentation/networking/devlink/index.rst linux-libre-6.9-rc6-gnu/Documentation/networking/devlink/index.rst
index e14d7a701b72..948c8c44e233 100644
--- linux-libre-6.8-gnu/Documentation/networking/devlink/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/devlink/index.rst
@@ -67,6 +67,7 @@ general.
    devlink-selftests
    devlink-trap
    devlink-linecard
+   devlink-eswitch-attr
 
 Driver-specific documentation
 -----------------------------
diff --git linux-libre-6.8-gnu/Documentation/networking/devlink/mlx5.rst linux-libre-6.9-rc6-gnu/Documentation/networking/devlink/mlx5.rst
index 702f204a3dbd..456985407475 100644
--- linux-libre-6.8-gnu/Documentation/networking/devlink/mlx5.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/devlink/mlx5.rst
@@ -97,6 +97,10 @@ parameters.
 
        When metadata is disabled, the above use cases will fail to initialize if
        users try to enable them.
+
+       Note: Setting this parameter does not take effect immediately. Setting
+       must happen in legacy mode and eswitch port metadata takes effect after
+       enabling switchdev mode.
    * - ``hairpin_num_queues``
      - u32
      - driverinit
@@ -246,7 +250,7 @@ them in realtime.
 
 Description of the vnic counters:
 
-- total_q_under_processor_handle
+- total_error_queues
         number of queues in an error state due to
         an async error or errored command.
 - send_queue_priority_update_flow
@@ -255,7 +259,8 @@ Description of the vnic counters:
         number of times CQ entered an error state due to an overflow.
 - async_eq_overrun
         number of times an EQ mapped to async events was overrun.
-        comp_eq_overrun number of times an EQ mapped to completion events was
+- comp_eq_overrun
+        number of times an EQ mapped to completion events was
         overrun.
 - quota_exceeded_command
         number of commands issued and failed due to quota exceeded.
diff --git linux-libre-6.8-gnu/Documentation/networking/index.rst linux-libre-6.9-rc6-gnu/Documentation/networking/index.rst
index 69f3d6dcd9fd..473d72c36d61 100644
--- linux-libre-6.8-gnu/Documentation/networking/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/index.rst
@@ -74,6 +74,7 @@ Contents:
    mpls-sysctl
    mptcp-sysctl
    multiqueue
+   multi-pf-netdev
    napi
    net_cachelines/index
    netconsole
diff --git linux-libre-6.8-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.9-rc6-gnu/Documentation/networking/ip-sysctl.rst
index 7afff42612e9..bd50df6a5a42 100644
--- linux-libre-6.8-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/ip-sysctl.rst
@@ -2503,7 +2503,7 @@ use_tempaddr - INTEGER
 
 temp_valid_lft - INTEGER
 	valid lifetime (in seconds) for temporary addresses. If less than the
-	minimum required lifetime (typically 5 seconds), temporary addresses
+	minimum required lifetime (typically 5-7 seconds), temporary addresses
 	will not be created.
 
 	Default: 172800 (2 days)
@@ -2511,7 +2511,7 @@ temp_valid_lft - INTEGER
 temp_prefered_lft - INTEGER
 	Preferred lifetime (in seconds) for temporary addresses. If
 	temp_prefered_lft is less than the minimum required lifetime (typically
-	5 seconds), temporary addresses will not be created. If
+	5-7 seconds), the preferred lifetime is the minimum required. If
 	temp_prefered_lft is greater than temp_valid_lft, the preferred lifetime
 	is temp_valid_lft.
 
@@ -2535,6 +2535,16 @@ max_desync_factor - INTEGER
 
 	Default: 600
 
+regen_min_advance - INTEGER
+	How far in advance (in seconds), at minimum, to create a new temporary
+	address before the current one is deprecated. This value is added to
+	the amount of time that may be required for duplicate address detection
+	to determine when to create a new address. Linux permits setting this
+	value to less than the default of 2 seconds, but a value less than 2
+	does not conform to RFC 8981.
+
+	Default: 2
+
 regen_max_retry - INTEGER
 	Number of attempts before give up attempting to generate
 	valid temporary addresses.
diff --git linux-libre-6.8-gnu/Documentation/networking/l2tp.rst linux-libre-6.9-rc6-gnu/Documentation/networking/l2tp.rst
index 7f383e99dbad..8496b467dea4 100644
--- linux-libre-6.8-gnu/Documentation/networking/l2tp.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/l2tp.rst
@@ -386,12 +386,19 @@ Sample userspace code:
 
   - Create session PPPoX data socket::
 
+        /* Input: the L2TP tunnel UDP socket `tunnel_fd`, which needs to be
+         * bound already (both sockname and peername), otherwise it will not be
+         * ready.
+         */
+
         struct sockaddr_pppol2tp sax;
-        int fd;
+        int session_fd;
+        int ret;
+
+        session_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
+        if (session_fd < 0)
+                return -errno;
 
-        /* Note, the tunnel socket must be bound already, else it
-         * will not be ready
-         */
         sax.sa_family = AF_PPPOX;
         sax.sa_protocol = PX_PROTO_OL2TP;
         sax.pppol2tp.fd = tunnel_fd;
@@ -406,12 +413,128 @@ Sample userspace code:
         /* session_fd is the fd of the session's PPPoL2TP socket.
          * tunnel_fd is the fd of the tunnel UDP / L2TPIP socket.
          */
-        fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
-        if (fd < 0 ) {
+        ret = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
+        if (ret < 0 ) {
+                close(session_fd);
+                return -errno;
+        }
+
+        return session_fd;
+
+L2TP control packets will still be available for read on `tunnel_fd`.
+
+  - Create PPP channel::
+
+        /* Input: the session PPPoX data socket `session_fd` which was created
+         * as described above.
+         */
+
+        int ppp_chan_fd;
+        int chindx;
+        int ret;
+
+        ret = ioctl(session_fd, PPPIOCGCHAN, &chindx);
+        if (ret < 0)
+                return -errno;
+
+        ppp_chan_fd = open("/dev/ppp", O_RDWR);
+        if (ppp_chan_fd < 0)
+                return -errno;
+
+        ret = ioctl(ppp_chan_fd, PPPIOCATTCHAN, &chindx);
+        if (ret < 0) {
+                close(ppp_chan_fd);
                 return -errno;
         }
+
+        return ppp_chan_fd;
+
+LCP PPP frames will be available for read on `ppp_chan_fd`.
+
+  - Create PPP interface::
+
+        /* Input: the PPP channel `ppp_chan_fd` which was created as described
+         * above.
+         */
+
+        int ifunit = -1;
+        int ppp_if_fd;
+        int ret;
+
+        ppp_if_fd = open("/dev/ppp", O_RDWR);
+        if (ppp_if_fd < 0)
+                return -errno;
+
+        ret = ioctl(ppp_if_fd, PPPIOCNEWUNIT, &ifunit);
+        if (ret < 0) {
+                close(ppp_if_fd);
+                return -errno;
+        }
+
+        ret = ioctl(ppp_chan_fd, PPPIOCCONNECT, &ifunit);
+        if (ret < 0) {
+                close(ppp_if_fd);
+                return -errno;
+        }
+
+        return ppp_if_fd;
+
+IPCP/IPv6CP PPP frames will be available for read on `ppp_if_fd`.
+
+The ppp<ifunit> interface can then be configured as usual with netlink's
+RTM_NEWLINK, RTM_NEWADDR, RTM_NEWROUTE, or ioctl's SIOCSIFMTU, SIOCSIFADDR,
+SIOCSIFDSTADDR, SIOCSIFNETMASK, SIOCSIFFLAGS, or with the `ip` command.
+
+  - Bridging L2TP sessions which have PPP pseudowire types (this is also called
+    L2TP tunnel switching or L2TP multihop) is supported by bridging the PPP
+    channels of the two L2TP sessions to be bridged::
+
+        /* Input: the session PPPoX data sockets `session_fd1` and `session_fd2`
+         * which were created as described further above.
+         */
+
+        int ppp_chan_fd;
+        int chindx1;
+        int chindx2;
+        int ret;
+
+        ret = ioctl(session_fd1, PPPIOCGCHAN, &chindx1);
+        if (ret < 0)
+                return -errno;
+
+        ret = ioctl(session_fd2, PPPIOCGCHAN, &chindx2);
+        if (ret < 0)
+                return -errno;
+
+        ppp_chan_fd = open("/dev/ppp", O_RDWR);
+        if (ppp_chan_fd < 0)
+                return -errno;
+
+        ret = ioctl(ppp_chan_fd, PPPIOCATTCHAN, &chindx1);
+        if (ret < 0) {
+                close(ppp_chan_fd);
+                return -errno;
+        }
+
+        ret = ioctl(ppp_chan_fd, PPPIOCBRIDGECHAN, &chindx2);
+        close(ppp_chan_fd);
+        if (ret < 0)
+                return -errno;
+
         return 0;
 
+It can be noted that when bridging PPP channels, the PPP session is not locally
+terminated, and no local PPP interface is created.  PPP frames arriving on one
+channel are directly passed to the other channel, and vice versa.
+
+The PPP channel does not need to be kept open.  Only the session PPPoX data
+sockets need to be kept open.
+
+More generally, it is also possible in the same way to e.g. bridge a PPPoL2TP
+PPP channel with other types of PPP channels, such as PPPoE.
+
+See more details for the PPP side in ppp_generic.rst.
+
 Old L2TPv2-only API
 -------------------
 
diff --git linux-libre-6.8-gnu/Documentation/networking/multi-pf-netdev.rst linux-libre-6.9-rc6-gnu/Documentation/networking/multi-pf-netdev.rst
new file mode 100644
index 000000000000..268819225866
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/multi-pf-netdev.rst
@@ -0,0 +1,174 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===============
+Multi-PF Netdev
+===============
+
+Contents
+========
+
+- `Background`_
+- `Overview`_
+- `mlx5 implementation`_
+- `Channels distribution`_
+- `Observability`_
+- `Steering`_
+- `Mutually exclusive features`_
+
+Background
+==========
+
+The Multi-PF NIC technology enables several CPUs within a multi-socket server to connect directly to
+the network, each through its own dedicated PCIe interface. Through either a connection harness that
+splits the PCIe lanes between two cards or by bifurcating a PCIe slot for a single card. This
+results in eliminating the network traffic traversing over the internal bus between the sockets,
+significantly reducing overhead and latency, in addition to reducing CPU utilization and increasing
+network throughput.
+
+Overview
+========
+
+The feature adds support for combining multiple PFs of the same port in a Multi-PF environment under
+one netdev instance. It is implemented in the netdev layer. Lower-layer instances like pci func,
+sysfs entry, and devlink are kept separate.
+Passing traffic through different devices belonging to different NUMA sockets saves cross-NUMA
+traffic and allows apps running on the same netdev from different NUMAs to still feel a sense of
+proximity to the device and achieve improved performance.
+
+mlx5 implementation
+===================
+
+Multi-PF or Socket-direct in mlx5 is achieved by grouping PFs together which belong to the same
+NIC and has the socket-direct property enabled, once all PFs are probed, we create a single netdev
+to represent all of them, symmetrically, we destroy the netdev whenever any of the PFs is removed.
+
+The netdev network channels are distributed between all devices, a proper configuration would utilize
+the correct close NUMA node when working on a certain app/CPU.
+
+We pick one PF to be a primary (leader), and it fills a special role. The other devices
+(secondaries) are disconnected from the network at the chip level (set to silent mode). In silent
+mode, no south <-> north traffic flowing directly through a secondary PF. It needs the assistance of
+the leader PF (east <-> west traffic) to function. All Rx/Tx traffic is steered through the primary
+to/from the secondaries.
+
+Currently, we limit the support to PFs only, and up to two PFs (sockets).
+
+Channels distribution
+=====================
+
+We distribute the channels between the different PFs to achieve local NUMA node performance
+on multiple NUMA nodes.
+
+Each combined channel works against one specific PF, creating all its datapath queues against it. We
+distribute channels to PFs in a round-robin policy.
+
+::
+
+        Example for 2 PFs and 5 channels:
+        +--------+--------+
+        | ch idx | PF idx |
+        +--------+--------+
+        |    0   |    0   |
+        |    1   |    1   |
+        |    2   |    0   |
+        |    3   |    1   |
+        |    4   |    0   |
+        +--------+--------+
+
+
+The reason we prefer round-robin is, it is less influenced by changes in the number of channels. The
+mapping between a channel index and a PF is fixed, no matter how many channels the user configures.
+As the channel stats are persistent across channel's closure, changing the mapping every single time
+would turn the accumulative stats less representing of the channel's history.
+
+This is achieved by using the correct core device instance (mdev) in each channel, instead of them
+all using the same instance under "priv->mdev".
+
+Observability
+=============
+The relation between PF, irq, napi, and queue can be observed via netlink spec::
+
+  $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump queue-get --json='{"ifindex": 13}'
+  [{'id': 0, 'ifindex': 13, 'napi-id': 539, 'type': 'rx'},
+   {'id': 1, 'ifindex': 13, 'napi-id': 540, 'type': 'rx'},
+   {'id': 2, 'ifindex': 13, 'napi-id': 541, 'type': 'rx'},
+   {'id': 3, 'ifindex': 13, 'napi-id': 542, 'type': 'rx'},
+   {'id': 4, 'ifindex': 13, 'napi-id': 543, 'type': 'rx'},
+   {'id': 0, 'ifindex': 13, 'napi-id': 539, 'type': 'tx'},
+   {'id': 1, 'ifindex': 13, 'napi-id': 540, 'type': 'tx'},
+   {'id': 2, 'ifindex': 13, 'napi-id': 541, 'type': 'tx'},
+   {'id': 3, 'ifindex': 13, 'napi-id': 542, 'type': 'tx'},
+   {'id': 4, 'ifindex': 13, 'napi-id': 543, 'type': 'tx'}]
+
+  $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump napi-get --json='{"ifindex": 13}'
+  [{'id': 543, 'ifindex': 13, 'irq': 42},
+   {'id': 542, 'ifindex': 13, 'irq': 41},
+   {'id': 541, 'ifindex': 13, 'irq': 40},
+   {'id': 540, 'ifindex': 13, 'irq': 39},
+   {'id': 539, 'ifindex': 13, 'irq': 36}]
+
+Here you can clearly observe our channels distribution policy::
+
+  $ ls /proc/irq/{36,39,40,41,42}/mlx5* -d -1
+  /proc/irq/36/mlx5_comp1@pci:0000:08:00.0
+  /proc/irq/39/mlx5_comp1@pci:0000:09:00.0
+  /proc/irq/40/mlx5_comp2@pci:0000:08:00.0
+  /proc/irq/41/mlx5_comp2@pci:0000:09:00.0
+  /proc/irq/42/mlx5_comp3@pci:0000:08:00.0
+
+Steering
+========
+Secondary PFs are set to "silent" mode, meaning they are disconnected from the network.
+
+In Rx, the steering tables belong to the primary PF only, and it is its role to distribute incoming
+traffic to other PFs, via cross-vhca steering capabilities. Still maintain a single default RSS table,
+that is capable of pointing to the receive queues of a different PF.
+
+In Tx, the primary PF creates a new Tx flow table, which is aliased by the secondaries, so they can
+go out to the network through it.
+
+In addition, we set default XPS configuration that, based on the CPU, selects an SQ belonging to the
+PF on the same node as the CPU.
+
+XPS default config example:
+
+NUMA node(s):          2
+NUMA node0 CPU(s):     0-11
+NUMA node1 CPU(s):     12-23
+
+PF0 on node0, PF1 on node1.
+
+- /sys/class/net/eth2/queues/tx-0/xps_cpus:000001
+- /sys/class/net/eth2/queues/tx-1/xps_cpus:001000
+- /sys/class/net/eth2/queues/tx-2/xps_cpus:000002
+- /sys/class/net/eth2/queues/tx-3/xps_cpus:002000
+- /sys/class/net/eth2/queues/tx-4/xps_cpus:000004
+- /sys/class/net/eth2/queues/tx-5/xps_cpus:004000
+- /sys/class/net/eth2/queues/tx-6/xps_cpus:000008
+- /sys/class/net/eth2/queues/tx-7/xps_cpus:008000
+- /sys/class/net/eth2/queues/tx-8/xps_cpus:000010
+- /sys/class/net/eth2/queues/tx-9/xps_cpus:010000
+- /sys/class/net/eth2/queues/tx-10/xps_cpus:000020
+- /sys/class/net/eth2/queues/tx-11/xps_cpus:020000
+- /sys/class/net/eth2/queues/tx-12/xps_cpus:000040
+- /sys/class/net/eth2/queues/tx-13/xps_cpus:040000
+- /sys/class/net/eth2/queues/tx-14/xps_cpus:000080
+- /sys/class/net/eth2/queues/tx-15/xps_cpus:080000
+- /sys/class/net/eth2/queues/tx-16/xps_cpus:000100
+- /sys/class/net/eth2/queues/tx-17/xps_cpus:100000
+- /sys/class/net/eth2/queues/tx-18/xps_cpus:000200
+- /sys/class/net/eth2/queues/tx-19/xps_cpus:200000
+- /sys/class/net/eth2/queues/tx-20/xps_cpus:000400
+- /sys/class/net/eth2/queues/tx-21/xps_cpus:400000
+- /sys/class/net/eth2/queues/tx-22/xps_cpus:000800
+- /sys/class/net/eth2/queues/tx-23/xps_cpus:800000
+
+Mutually exclusive features
+===========================
+
+The nature of Multi-PF, where different channels work with different PFs, conflicts with
+stateful features where the state is maintained in one of the PFs.
+For example, in the TLS device-offload feature, special context objects are created per connection
+and maintained in the PF.  Transitioning between different RQs/SQs would break the feature. Hence,
+we disable this combination for now.
diff --git linux-libre-6.8-gnu/Documentation/networking/net_cachelines/net_device.rst linux-libre-6.9-rc6-gnu/Documentation/networking/net_cachelines/net_device.rst
index dceb49d56a91..70c4fb9d4e5c 100644
--- linux-libre-6.8-gnu/Documentation/networking/net_cachelines/net_device.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/net_cachelines/net_device.rst
@@ -13,7 +13,7 @@ struct_dev_ifalias*                 ifalias
 unsigned_long                       mem_end                                                         
 unsigned_long                       mem_start                                                       
 unsigned_long                       base_addr                                                       
-unsigned_long                       state                                                           
+unsigned_long                       state                   read_mostly         read_mostly         netif_running(dev)
 struct_list_head                    dev_list                                                        
 struct_list_head                    napi_list                                                       
 struct_list_head                    unreg_list                                                      
diff --git linux-libre-6.8-gnu/Documentation/networking/netconsole.rst linux-libre-6.9-rc6-gnu/Documentation/networking/netconsole.rst
index 390730a74332..d55c2a22ec7a 100644
--- linux-libre-6.8-gnu/Documentation/networking/netconsole.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/netconsole.rst
@@ -15,6 +15,8 @@ Extended console support by Tejun Heo <tj@kernel.org>, May 1 2015
 
 Release prepend support by Breno Leitao <leitao@debian.org>, Jul 7 2023
 
+Userdata append support by Matthew Wood <thepacketgeek@gmail.com>, Jan 22 2024
+
 Please send bug reports to Matt Mackall <mpm@selenic.com>
 Satyam Sharma <satyam.sharma@gmail.com>, and Cong Wang <xiyou.wangcong@gmail.com>
 
@@ -171,6 +173,70 @@ You can modify these targets in runtime by creating the following targets::
  cat cmdline1/remote_ip
  10.0.0.3
 
+Append User Data
+----------------
+
+Custom user data can be appended to the end of messages with netconsole
+dynamic configuration enabled. User data entries can be modified without
+changing the "enabled" attribute of a target.
+
+Directories (keys) under `userdata` are limited to 53 character length, and
+data in `userdata/<key>/value` are limited to 200 bytes::
+
+ cd /sys/kernel/config/netconsole && mkdir cmdline0
+ cd cmdline0
+ mkdir userdata/foo
+ echo bar > userdata/foo/value
+ mkdir userdata/qux
+ echo baz > userdata/qux/value
+
+Messages will now include this additional user data::
+
+ echo "This is a message" > /dev/kmsg
+
+Sends::
+
+ 12,607,22085407756,-;This is a message
+  foo=bar
+  qux=baz
+
+Preview the userdata that will be appended with::
+
+ cd /sys/kernel/config/netconsole/cmdline0/userdata
+ for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done
+
+If a `userdata` entry is created but no data is written to the `value` file,
+the entry will be omitted from netconsole messages::
+
+ cd /sys/kernel/config/netconsole && mkdir cmdline0
+ cd cmdline0
+ mkdir userdata/foo
+ echo bar > userdata/foo/value
+ mkdir userdata/qux
+
+The `qux` key is omitted since it has no value::
+
+ echo "This is a message" > /dev/kmsg
+ 12,607,22085407756,-;This is a message
+  foo=bar
+
+Delete `userdata` entries with `rmdir`::
+
+ rmdir /sys/kernel/config/netconsole/cmdline0/userdata/qux
+
+.. warning::
+   When writing strings to user data values, input is broken up per line in
+   configfs store calls and this can cause confusing behavior::
+
+     mkdir userdata/testing
+     printf "val1\nval2" > userdata/testing/value
+     # userdata store value is called twice, first with "val1\n" then "val2"
+     # so "val2" is stored, being the last value stored
+     cat userdata/testing/value
+     val2
+
+   It is recommended to not write user data values with newlines.
+
 Extended console:
 =================
 
diff --git linux-libre-6.8-gnu/Documentation/networking/netdevices.rst linux-libre-6.9-rc6-gnu/Documentation/networking/netdevices.rst
index 9e4cccb90b87..c2476917a6c3 100644
--- linux-libre-6.8-gnu/Documentation/networking/netdevices.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/netdevices.rst
@@ -252,8 +252,8 @@ ndo_eth_ioctl:
 	Context: process
 
 ndo_get_stats:
-	Synchronization: rtnl_lock() semaphore, dev_base_lock rwlock, or RCU.
-	Context: atomic (can't sleep under rwlock or RCU)
+	Synchronization: rtnl_lock() semaphore, or RCU.
+	Context: atomic (can't sleep under RCU)
 
 ndo_start_xmit:
 	Synchronization: __netif_tx_lock spinlock.
diff --git linux-libre-6.8-gnu/Documentation/networking/representors.rst linux-libre-6.9-rc6-gnu/Documentation/networking/representors.rst
index decb39c19b9e..5e23386f6968 100644
--- linux-libre-6.8-gnu/Documentation/networking/representors.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/representors.rst
@@ -1,4 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0
+.. _representors:
 
 =============================
 Network Function Representors
diff --git linux-libre-6.8-gnu/Documentation/networking/sfp-phylink.rst linux-libre-6.9-rc6-gnu/Documentation/networking/sfp-phylink.rst
index 8054d33f449f..5bf285d73e8a 100644
--- linux-libre-6.8-gnu/Documentation/networking/sfp-phylink.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/sfp-phylink.rst
@@ -231,16 +231,136 @@ this documentation.
    For further information on these methods, please see the inline
    documentation in :c:type:`struct phylink_mac_ops <phylink_mac_ops>`.
 
-9. Remove calls to of_parse_phandle() for the PHY,
-   of_phy_register_fixed_link() for fixed links etc. from the probe
-   function, and replace with:
+9. Fill-in the :c:type:`struct phylink_config <phylink_config>` fields with
+   a reference to the :c:type:`struct device <device>` associated to your
+   :c:type:`struct net_device <net_device>`:
 
    .. code-block:: c
 
-	struct phylink *phylink;
 	priv->phylink_config.dev = &dev.dev;
 	priv->phylink_config.type = PHYLINK_NETDEV;
 
+   Fill-in the various speeds, pause and duplex modes your MAC can handle:
+
+   .. code-block:: c
+
+        priv->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD;
+
+10. Some Ethernet controllers work in pair with a PCS (Physical Coding Sublayer)
+    block, that can handle among other things the encoding/decoding, link
+    establishment detection and autonegotiation. While some MACs have internal
+    PCS whose operation is transparent, some other require dedicated PCS
+    configuration for the link to become functional. In that case, phylink
+    provides a PCS abstraction through :c:type:`struct phylink_pcs <phylink_pcs>`.
+
+    Identify if your driver has one or more internal PCS blocks, and/or if
+    your controller can use an external PCS block that might be internally
+    connected to your controller.
+
+    If your controller doesn't have any internal PCS, you can go to step 11.
+
+    If your Ethernet controller contains one or several PCS blocks, create
+    one :c:type:`struct phylink_pcs <phylink_pcs>` instance per PCS block within
+    your driver's private data structure:
+
+    .. code-block:: c
+
+        struct phylink_pcs pcs;
+
+    Populate the relevant :c:type:`struct phylink_pcs_ops <phylink_pcs_ops>` to
+    configure your PCS. Create a :c:func:`pcs_get_state` function that reports
+    the inband link state, a :c:func:`pcs_config` function to configure your
+    PCS according to phylink-provided parameters, and a :c:func:`pcs_validate`
+    function that report to phylink all accepted configuration parameters for
+    your PCS:
+
+    .. code-block:: c
+
+        struct phylink_pcs_ops foo_pcs_ops = {
+                .pcs_validate = foo_pcs_validate,
+                .pcs_get_state = foo_pcs_get_state,
+                .pcs_config = foo_pcs_config,
+        };
+
+    Arrange for PCS link state interrupts to be forwarded into
+    phylink, via:
+
+    .. code-block:: c
+
+        phylink_pcs_change(pcs, link_is_up);
+
+    where ``link_is_up`` is true if the link is currently up or false
+    otherwise. If a PCS is unable to provide these interrupts, then
+    it should set ``pcs->pcs_poll = true;`` when creating the PCS.
+
+11. If your controller relies on, or accepts the presence of an external PCS
+    controlled through its own driver, add a pointer to a phylink_pcs instance
+    in your driver private data structure:
+
+    .. code-block:: c
+
+        struct phylink_pcs *pcs;
+
+    The way of getting an instance of the actual PCS depends on the platform,
+    some PCS sit on an MDIO bus and are grabbed by passing a pointer to the
+    corresponding :c:type:`struct mii_bus <mii_bus>` and the PCS's address on
+    that bus. In this example, we assume the controller attaches to a Lynx PCS
+    instance:
+
+    .. code-block:: c
+
+        priv->pcs = lynx_pcs_create_mdiodev(bus, 0);
+
+    Some PCS can be recovered based on firmware information:
+
+    .. code-block:: c
+
+        priv->pcs = lynx_pcs_create_fwnode(of_fwnode_handle(node));
+
+12. Populate the :c:func:`mac_select_pcs` callback and add it to your
+    :c:type:`struct phylink_mac_ops <phylink_mac_ops>` set of ops. This function
+    must return a pointer to the relevant :c:type:`struct phylink_pcs <phylink_pcs>`
+    that will be used for the requested link configuration:
+
+    .. code-block:: c
+
+        static struct phylink_pcs *foo_select_pcs(struct phylink_config *config,
+                                                  phy_interface_t interface)
+        {
+                struct foo_priv *priv = container_of(config, struct foo_priv,
+                                                     phylink_config);
+
+                if ( /* 'interface' needs a PCS to function */ )
+                        return priv->pcs;
+
+                return NULL;
+        }
+
+    See :c:func:`mvpp2_select_pcs` for an example of a driver that has multiple
+    internal PCS.
+
+13. Fill-in all the :c:type:`phy_interface_t <phy_interface_t>` (i.e. all MAC to
+    PHY link modes) that your MAC can output. The following example shows a
+    configuration for a MAC that can handle all RGMII modes, SGMII and 1000BaseX.
+    You must adjust these according to what your MAC and all PCS associated
+    with this MAC are capable of, and not just the interface you wish to use:
+
+    .. code-block:: c
+
+       phy_interface_set_rgmii(priv->phylink_config.supported_interfaces);
+        __set_bit(PHY_INTERFACE_MODE_SGMII,
+                  priv->phylink_config.supported_interfaces);
+        __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+                  priv->phylink_config.supported_interfaces);
+
+14. Remove calls to of_parse_phandle() for the PHY,
+    of_phy_register_fixed_link() for fixed links etc. from the probe
+    function, and replace with:
+
+    .. code-block:: c
+
+	struct phylink *phylink;
+
 	phylink = phylink_create(&priv->phylink_config, node, phy_mode, &phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
@@ -249,14 +369,14 @@ this documentation.
 
 	priv->phylink = phylink;
 
-   and arrange to destroy the phylink in the probe failure path as
-   appropriate and the removal path too by calling:
+    and arrange to destroy the phylink in the probe failure path as
+    appropriate and the removal path too by calling:
 
-   .. code-block:: c
+    .. code-block:: c
 
 	phylink_destroy(priv->phylink);
 
-10. Arrange for MAC link state interrupts to be forwarded into
+15. Arrange for MAC link state interrupts to be forwarded into
     phylink, via:
 
     .. code-block:: c
@@ -264,17 +384,16 @@ this documentation.
 	phylink_mac_change(priv->phylink, link_is_up);
 
     where ``link_is_up`` is true if the link is currently up or false
-    otherwise. If a MAC is unable to provide these interrupts, then
-    it should set ``priv->phylink_config.pcs_poll = true;`` in step 9.
+    otherwise.
 
-11. Verify that the driver does not call::
+16. Verify that the driver does not call::
 
 	netif_carrier_on()
 	netif_carrier_off()
 
-   as these will interfere with phylink's tracking of the link state,
-   and cause phylink to omit calls via the :c:func:`mac_link_up` and
-   :c:func:`mac_link_down` methods.
+    as these will interfere with phylink's tracking of the link state,
+    and cause phylink to omit calls via the :c:func:`mac_link_up` and
+    :c:func:`mac_link_down` methods.
 
 Network drivers should call phylink_stop() and phylink_start() via their
 suspend/resume paths, which ensures that the appropriate
diff --git linux-libre-6.8-gnu/Documentation/networking/statistics.rst linux-libre-6.9-rc6-gnu/Documentation/networking/statistics.rst
index 551b3cc29a41..75e017dfa825 100644
--- linux-libre-6.8-gnu/Documentation/networking/statistics.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/statistics.rst
@@ -41,6 +41,15 @@ If `-s` is specified once the detailed errors won't be shown.
 
 `ip` supports JSON formatting via the `-j` option.
 
+Queue statistics
+~~~~~~~~~~~~~~~~
+
+Queue statistics are accessible via the netdev netlink family.
+
+Currently no widely distributed CLI exists to access those statistics.
+Kernel development tools (ynl) can be used to experiment with them,
+see `Documentation/userspace-api/netlink/intro-specs.rst`.
+
 Protocol-specific statistics
 ----------------------------
 
@@ -147,6 +156,12 @@ Statistics are reported both in the responses to link information
 requests (`RTM_GETLINK`) and statistic requests (`RTM_GETSTATS`,
 when `IFLA_STATS_LINK_64` bit is set in the `.filter_mask` of the request).
 
+netdev (netlink)
+~~~~~~~~~~~~~~~~
+
+`netdev` generic netlink family allows accessing page pool and per queue
+statistics.
+
 ethtool
 -------
 
diff --git linux-libre-6.8-gnu/Documentation/networking/xfrm_device.rst linux-libre-6.9-rc6-gnu/Documentation/networking/xfrm_device.rst
index 535077cbeb07..bfea9d8579ed 100644
--- linux-libre-6.8-gnu/Documentation/networking/xfrm_device.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/networking/xfrm_device.rst
@@ -71,9 +71,9 @@ Callbacks to implement
 	bool	(*xdo_dev_offload_ok) (struct sk_buff *skb,
 				       struct xfrm_state *x);
 	void    (*xdo_dev_state_advance_esn) (struct xfrm_state *x);
+	void    (*xdo_dev_state_update_stats) (struct xfrm_state *x);
 
         /* Solely packet offload callbacks */
-	void    (*xdo_dev_state_update_curlft) (struct xfrm_state *x);
 	int	(*xdo_dev_policy_add) (struct xfrm_policy *x, struct netlink_ext_ack *extack);
 	void	(*xdo_dev_policy_delete) (struct xfrm_policy *x);
 	void	(*xdo_dev_policy_free) (struct xfrm_policy *x);
@@ -191,6 +191,6 @@ xdo_dev_policy_free() on any remaining offloaded states.
 
 Outcome of HW handling packets, the XFRM core can't count hard, soft limits.
 The HW/driver are responsible to perform it and provide accurate data when
-xdo_dev_state_update_curlft() is called. In case of one of these limits
+xdo_dev_state_update_stats() is called. In case of one of these limits
 occuried, the driver needs to call to xfrm_state_check_expire() to make sure
 that XFRM performs rekeying sequence.
diff --git linux-libre-6.8-gnu/Documentation/power/energy-model.rst linux-libre-6.9-rc6-gnu/Documentation/power/energy-model.rst
index 13225965c9a4..ada4938c37e5 100644
--- linux-libre-6.8-gnu/Documentation/power/energy-model.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/power/energy-model.rst
@@ -71,6 +71,31 @@ whose performance is scaled together. Performance domains generally have a
 required to have the same micro-architecture. CPUs in different performance
 domains can have different micro-architectures.
 
+To better reflect power variation due to static power (leakage) the EM
+supports runtime modifications of the power values. The mechanism relies on
+RCU to free the modifiable EM perf_state table memory. Its user, the task
+scheduler, also uses RCU to access this memory. The EM framework provides
+API for allocating/freeing the new memory for the modifiable EM table.
+The old memory is freed automatically using RCU callback mechanism when there
+are no owners anymore for the given EM runtime table instance. This is tracked
+using kref mechanism. The device driver which provided the new EM at runtime,
+should call EM API to free it safely when it's no longer needed. The EM
+framework will handle the clean-up when it's possible.
+
+The kernel code which want to modify the EM values is protected from concurrent
+access using a mutex. Therefore, the device driver code must run in sleeping
+context when it tries to modify the EM.
+
+With the runtime modifiable EM we switch from a 'single and during the entire
+runtime static EM' (system property) design to a 'single EM which can be
+changed during runtime according e.g. to the workload' (system and workload
+property) design.
+
+It is possible also to modify the CPU performance values for each EM's
+performance state. Thus, the full power and performance profile (which
+is an exponential curve) can be changed according e.g. to the workload
+or system property.
+
 
 2. Core APIs
 ------------
@@ -175,10 +200,82 @@ CPUfreq governor is in use in case of CPU device. Currently this calculation is
 not provided for other type of devices.
 
 More details about the above APIs can be found in ``<linux/energy_model.h>``
-or in Section 2.4
+or in Section 2.5
+
+
+2.4 Runtime modifications
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Drivers willing to update the EM at runtime should use the following dedicated
+function to allocate a new instance of the modified EM. The API is listed
+below::
+
+  struct em_perf_table __rcu *em_table_alloc(struct em_perf_domain *pd);
+
+This allows to allocate a structure which contains the new EM table with
+also RCU and kref needed by the EM framework. The 'struct em_perf_table'
+contains array 'struct em_perf_state state[]' which is a list of performance
+states in ascending order. That list must be populated by the device driver
+which wants to update the EM. The list of frequencies can be taken from
+existing EM (created during boot). The content in the 'struct em_perf_state'
+must be populated by the driver as well.
+
+This is the API which does the EM update, using RCU pointers swap::
+
+  int em_dev_update_perf_domain(struct device *dev,
+			struct em_perf_table __rcu *new_table);
+
+Drivers must provide a pointer to the allocated and initialized new EM
+'struct em_perf_table'. That new EM will be safely used inside the EM framework
+and will be visible to other sub-systems in the kernel (thermal, powercap).
+The main design goal for this API is to be fast and avoid extra calculations
+or memory allocations at runtime. When pre-computed EMs are available in the
+device driver, than it should be possible to simply re-use them with low
+performance overhead.
+
+In order to free the EM, provided earlier by the driver (e.g. when the module
+is unloaded), there is a need to call the API::
+
+  void em_table_free(struct em_perf_table __rcu *table);
+
+It will allow the EM framework to safely remove the memory, when there is
+no other sub-system using it, e.g. EAS.
+
+To use the power values in other sub-systems (like thermal, powercap) there is
+a need to call API which protects the reader and provide consistency of the EM
+table data::
+
+  struct em_perf_state *em_perf_state_from_pd(struct em_perf_domain *pd);
+
+It returns the 'struct em_perf_state' pointer which is an array of performance
+states in ascending order.
+This function must be called in the RCU read lock section (after the
+rcu_read_lock()). When the EM table is not needed anymore there is a need to
+call rcu_real_unlock(). In this way the EM safely uses the RCU read section
+and protects the users. It also allows the EM framework to manage the memory
+and free it. More details how to use it can be found in Section 3.2 in the
+example driver.
+
+There is dedicated API for device drivers to calculate em_perf_state::cost
+values::
+
+  int em_dev_compute_costs(struct device *dev, struct em_perf_state *table,
+                           int nr_states);
+
+These 'cost' values from EM are used in EAS. The new EM table should be passed
+together with the number of entries and device pointer. When the computation
+of the cost values is done properly the return value from the function is 0.
+The function takes care for right setting of inefficiency for each performance
+state as well. It updates em_perf_state::flags accordingly.
+Then such prepared new EM can be passed to the em_dev_update_perf_domain()
+function, which will allow to use it.
+
+More details about the above APIs can be found in ``<linux/energy_model.h>``
+or in Section 3.2 with an example code showing simple implementation of the
+updating mechanism in a device driver.
 
 
-2.4 Description details of this API
+2.5 Description details of this API
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 .. kernel-doc:: include/linux/energy_model.h
    :internal:
@@ -187,8 +284,11 @@ or in Section 2.4
    :export:
 
 
-3. Example driver
------------------
+3. Examples
+-----------
+
+3.1 Example driver with EM registration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The CPUFreq framework supports dedicated callback for registering
 the EM for a given CPU(s) 'policy' object: cpufreq_driver::register_em().
@@ -242,3 +342,78 @@ EM framework::
   39	static struct cpufreq_driver foo_cpufreq_driver = {
   40		.register_em = foo_cpufreq_register_em,
   41	};
+
+
+3.2 Example driver with EM modification
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This section provides a simple example of a thermal driver modifying the EM.
+The driver implements a foo_thermal_em_update() function. The driver is woken
+up periodically to check the temperature and modify the EM data::
+
+  -> drivers/soc/example/example_em_mod.c
+
+  01	static void foo_get_new_em(struct foo_context *ctx)
+  02	{
+  03		struct em_perf_table __rcu *em_table;
+  04		struct em_perf_state *table, *new_table;
+  05		struct device *dev = ctx->dev;
+  06		struct em_perf_domain *pd;
+  07		unsigned long freq;
+  08		int i, ret;
+  09
+  10		pd = em_pd_get(dev);
+  11		if (!pd)
+  12			return;
+  13
+  14		em_table = em_table_alloc(pd);
+  15		if (!em_table)
+  16			return;
+  17
+  18		new_table = em_table->state;
+  19
+  20		rcu_read_lock();
+  21		table = em_perf_state_from_pd(pd);
+  22		for (i = 0; i < pd->nr_perf_states; i++) {
+  23			freq = table[i].frequency;
+  24			foo_get_power_perf_values(dev, freq, &new_table[i]);
+  25		}
+  26		rcu_read_unlock();
+  27
+  28		/* Calculate 'cost' values for EAS */
+  29		ret = em_dev_compute_costs(dev, table, pd->nr_perf_states);
+  30		if (ret) {
+  31			dev_warn(dev, "EM: compute costs failed %d\n", ret);
+  32			em_free_table(em_table);
+  33			return;
+  34		}
+  35
+  36		ret = em_dev_update_perf_domain(dev, em_table);
+  37		if (ret) {
+  38			dev_warn(dev, "EM: update failed %d\n", ret);
+  39			em_free_table(em_table);
+  40			return;
+  41		}
+  42
+  43		/*
+  44		 * Since it's one-time-update drop the usage counter.
+  45		 * The EM framework will later free the table when needed.
+  46		 */
+  47		em_table_free(em_table);
+  48	}
+  49
+  50	/*
+  51	 * Function called periodically to check the temperature and
+  52	 * update the EM if needed
+  53	 */
+  54	static void foo_thermal_em_update(struct foo_context *ctx)
+  55	{
+  56		struct device *dev = ctx->dev;
+  57		int cpu;
+  58
+  59		ctx->temperature = foo_get_temp(dev, ctx);
+  60		if (ctx->temperature < FOO_EM_UPDATE_TEMP_THRESHOLD)
+  61			return;
+  62
+  63		foo_get_new_em(ctx);
+  64	}
diff --git linux-libre-6.8-gnu/Documentation/power/opp.rst linux-libre-6.9-rc6-gnu/Documentation/power/opp.rst
index a7c03c470980..1b7f1d854f14 100644
--- linux-libre-6.8-gnu/Documentation/power/opp.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/power/opp.rst
@@ -305,7 +305,7 @@ dev_pm_opp_get_opp_count
 	 {
 		/* Do things */
 		num_available = dev_pm_opp_get_opp_count(dev);
-		speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL);
+		speeds = kcalloc(num_available, sizeof(u32), GFP_KERNEL);
 		/* populate the table in increasing order */
 		freq = 0;
 		while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) {
diff --git linux-libre-6.8-gnu/Documentation/power/pci.rst linux-libre-6.9-rc6-gnu/Documentation/power/pci.rst
index a125544b4cb6..12070320307e 100644
--- linux-libre-6.8-gnu/Documentation/power/pci.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/power/pci.rst
@@ -625,7 +625,7 @@ The PCI subsystem-level callbacks they correspond to::
 	pci_pm_poweroff()
 	pci_pm_poweroff_noirq()
 
-work in analogy with pci_pm_suspend() and pci_pm_poweroff_noirq(), respectively,
+work in analogy with pci_pm_suspend() and pci_pm_suspend_noirq(), respectively,
 although they don't attempt to save the device's standard configuration
 registers.
 
diff --git linux-libre-6.8-gnu/Documentation/power/runtime_pm.rst linux-libre-6.9-rc6-gnu/Documentation/power/runtime_pm.rst
index 65b86e487afe..5c4e730f38d0 100644
--- linux-libre-6.8-gnu/Documentation/power/runtime_pm.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/power/runtime_pm.rst
@@ -154,7 +154,7 @@ suspending the device are satisfied) and to queue up a suspend request for the
 device in that case.  If there is no idle callback, or if the callback returns
 0, then the PM core will attempt to carry out a runtime suspend of the device,
 also respecting devices configured for autosuspend.  In essence this means a
-call to pm_runtime_autosuspend() (do note that drivers needs to update the
+call to __pm_runtime_autosuspend() (do note that drivers needs to update the
 device last busy mark, pm_runtime_mark_last_busy(), to control the delay under
 this circumstance).  To prevent this (for example, if the callback routine has
 started a delayed suspend), the routine must return a non-zero value.  Negative
@@ -396,10 +396,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       nonzero, increment the counter and return 1; otherwise return 0 without
       changing the counter
 
-  `int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count);`
+  `int pm_runtime_get_if_active(struct device *dev);`
     - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
-      runtime PM status is RPM_ACTIVE, and either ign_usage_count is true
-      or the device's usage_count is non-zero, increment the counter and
+      runtime PM status is RPM_ACTIVE, increment the counter and
       return 1; otherwise return 0 without changing the counter
 
   `void pm_runtime_put_noidle(struct device *dev);`
@@ -410,6 +409,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       pm_request_idle(dev) and return its result
 
   `int pm_runtime_put_autosuspend(struct device *dev);`
+    - does the same as __pm_runtime_put_autosuspend() for now, but in the
+      future, will also call pm_runtime_mark_last_busy() as well, DO NOT USE!
+
+  `int __pm_runtime_put_autosuspend(struct device *dev);`
     - decrement the device's usage counter; if the result is 0 then run
       pm_request_autosuspend(dev) and return its result
 
@@ -540,6 +543,7 @@ It is safe to execute the following helper functions from interrupt context:
 - pm_runtime_put_noidle()
 - pm_runtime_put()
 - pm_runtime_put_autosuspend()
+- __pm_runtime_put_autosuspend()
 - pm_runtime_enable()
 - pm_suspend_ignore_children()
 - pm_runtime_set_active()
@@ -730,6 +734,7 @@ out the following operations:
     for it, respectively.
 
 7. Generic subsystem callbacks
+==============================
 
 Subsystems may wish to conserve code space by using the set of generic power
 management callbacks provided by the PM core, defined in
@@ -865,9 +870,9 @@ automatically be delayed until the desired period of inactivity has elapsed.
 
 Inactivity is determined based on the power.last_busy field.  Drivers should
 call pm_runtime_mark_last_busy() to update this field after carrying out I/O,
-typically just before calling pm_runtime_put_autosuspend().  The desired length
-of the inactivity period is a matter of policy.  Subsystems can set this length
-initially by calling pm_runtime_set_autosuspend_delay(), but after device
+typically just before calling __pm_runtime_put_autosuspend().  The desired
+length of the inactivity period is a matter of policy.  Subsystems can set this
+length initially by calling pm_runtime_set_autosuspend_delay(), but after device
 registration the length should be controlled by user space, using the
 /sys/devices/.../power/autosuspend_delay_ms attribute.
 
@@ -878,7 +883,7 @@ instead of the non-autosuspend counterparts::
 
 	Instead of: pm_runtime_suspend    use: pm_runtime_autosuspend;
 	Instead of: pm_schedule_suspend   use: pm_request_autosuspend;
-	Instead of: pm_runtime_put        use: pm_runtime_put_autosuspend;
+	Instead of: pm_runtime_put        use: __pm_runtime_put_autosuspend;
 	Instead of: pm_runtime_put_sync   use: pm_runtime_put_sync_autosuspend.
 
 Drivers may also continue to use the non-autosuspend helper functions; they
@@ -917,7 +922,7 @@ Here is a schematic pseudo-code example::
 		lock(&foo->private_lock);
 		if (--foo->num_pending_requests == 0) {
 			pm_runtime_mark_last_busy(&foo->dev);
-			pm_runtime_put_autosuspend(&foo->dev);
+			__pm_runtime_put_autosuspend(&foo->dev);
 		} else {
 			foo_process_next_request(foo);
 		}
diff --git linux-libre-6.8-gnu/Documentation/power/suspend-and-interrupts.rst linux-libre-6.9-rc6-gnu/Documentation/power/suspend-and-interrupts.rst
index dfbace2f4600..f588feeecad0 100644
--- linux-libre-6.8-gnu/Documentation/power/suspend-and-interrupts.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/power/suspend-and-interrupts.rst
@@ -78,7 +78,7 @@ handling the given IRQ as a system wakeup interrupt line and disable_irq_wake()
 turns that logic off.
 
 Calling enable_irq_wake() causes suspend_device_irqs() to treat the given IRQ
-in a special way.  Namely, the IRQ remains enabled, by on the first interrupt
+in a special way.  Namely, the IRQ remains enabled, but on the first interrupt
 it will be disabled, marked as pending and "suspended" so that it will be
 re-enabled by resume_device_irqs() during the subsequent system resume.  Also
 the PM core is notified about the event which causes the system suspend in
diff --git linux-libre-6.8-gnu/Documentation/process/changes.rst linux-libre-6.9-rc6-gnu/Documentation/process/changes.rst
index 50b3d1cb1115..7ef8de58f7f8 100644
--- linux-libre-6.8-gnu/Documentation/process/changes.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/changes.rst
@@ -30,8 +30,8 @@ you probably needn't concern yourself with pcmciautils.
         Program        Minimal version       Command to check the version
 ====================== ===============  ========================================
 GNU C                  5.1              gcc --version
-Clang/LLVM (optional)  11.0.0           clang --version
-Rust (optional)        1.74.1           rustc --version
+Clang/LLVM (optional)  13.0.1           clang --version
+Rust (optional)        1.76.0           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               3.82             make --version
 bash                   4.2              bash --version
@@ -144,8 +144,8 @@ Bison
 Since Linux 4.16, the build system generates parsers
 during build.  This requires bison 2.0 or later.
 
-pahole:
--------
+pahole
+------
 
 Since Linux 5.2, if CONFIG_DEBUG_INFO_BTF is selected, the build system
 generates BTF (BPF Type Format) from DWARF in vmlinux, a bit later from kernel
diff --git linux-libre-6.8-gnu/Documentation/process/coding-style.rst linux-libre-6.9-rc6-gnu/Documentation/process/coding-style.rst
index c48382c6b477..9c7cf7347394 100644
--- linux-libre-6.8-gnu/Documentation/process/coding-style.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/coding-style.rst
@@ -203,7 +203,7 @@ Do not unnecessarily use braces where a single statement will do.
 
 and
 
-.. code-block:: none
+.. code-block:: c
 
 	if (condition)
 		do_this();
@@ -586,9 +586,9 @@ fix for this is to split it up into two error labels ``err_free_bar:`` and
 
 .. code-block:: c
 
-	 err_free_bar:
+	err_free_bar:
 		kfree(foo->bar);
-	 err_free_foo:
+	err_free_foo:
 		kfree(foo);
 		return ret;
 
@@ -660,7 +660,7 @@ make a good program).
 So, you can either get rid of GNU emacs, or change it to use saner
 values.  To do the latter, you can stick the following in your .emacs file:
 
-.. code-block:: none
+.. code-block:: elisp
 
   (defun c-lineup-arglist-tabs-only (ignored)
     "Line up argument lists by tabs, not spaces"
@@ -679,7 +679,7 @@ values.  To do the latter, you can stick the following in your .emacs file:
           (c-offsets-alist . (
                   (arglist-close         . c-lineup-arglist-tabs-only)
                   (arglist-cont-nonempty .
-		      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
+                      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
                   (arglist-intro         . +)
                   (brace-list-intro      . +)
                   (c                     . c-lineup-C-comments)
@@ -899,7 +899,8 @@ which you should use to make sure messages are matched to the right device
 and driver, and are tagged with the right level:  dev_err(), dev_warn(),
 dev_info(), and so forth.  For messages that aren't associated with a
 particular device, <linux/printk.h> defines pr_notice(), pr_info(),
-pr_warn(), pr_err(), etc.
+pr_warn(), pr_err(), etc. When drivers are working properly they are quiet,
+so prefer to use dev_dbg/pr_debug unless something is wrong.
 
 Coming up with good debugging messages can be quite a challenge; and once
 you have them, they can be a huge help for remote troubleshooting.  However
diff --git linux-libre-6.8-gnu/Documentation/process/embargoed-hardware-issues.rst linux-libre-6.9-rc6-gnu/Documentation/process/embargoed-hardware-issues.rst
index 31000f075707..6e9a4597bf2c 100644
--- linux-libre-6.8-gnu/Documentation/process/embargoed-hardware-issues.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/embargoed-hardware-issues.rst
@@ -252,10 +252,10 @@ an involved disclosed party. The current ambassadors list:
   AMD		Tom Lendacky <thomas.lendacky@amd.com>
   Ampere	Darren Hart <darren@os.amperecomputing.com>
   ARM		Catalin Marinas <catalin.marinas@arm.com>
-  IBM Power	Anton Blanchard <anton@linux.ibm.com>
+  IBM Power	Michael Ellerman <ellerman@au.ibm.com>
   IBM Z		Christian Borntraeger <borntraeger@de.ibm.com>
   Intel		Tony Luck <tony.luck@intel.com>
-  Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+  Qualcomm	Trilok Soni <quic_tsoni@quicinc.com>
   RISC-V	Palmer Dabbelt <palmer@dabbelt.com>
   Samsung	Javier González <javier.gonz@samsung.com>
 
diff --git linux-libre-6.8-gnu/Documentation/process/handling-regressions.rst linux-libre-6.9-rc6-gnu/Documentation/process/handling-regressions.rst
index 5d3c3de3f4ec..ce6753a674f3 100644
--- linux-libre-6.8-gnu/Documentation/process/handling-regressions.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/handling-regressions.rst
@@ -27,11 +27,11 @@ The important bits (aka "The TL;DR")
    is optional, but recommended):
 
     * For mailed reports, check if the reporter included a line like ``#regzbot
-      introduced v5.13..v5.14-rc1``. If not, send a reply (with the regressions
+      introduced: v5.13..v5.14-rc1``. If not, send a reply (with the regressions
       list in CC) containing a paragraph like the following, which tells regzbot
       when the issue started to happen::
 
-       #regzbot ^introduced 1f2e3d4c5b6a
+       #regzbot ^introduced: 1f2e3d4c5b6a
 
     * When forwarding reports from a bug tracker to the regressions list (see
       above), include a paragraph like the following::
@@ -79,7 +79,7 @@ When doing either, consider making the Linux kernel regression tracking bot
 "regzbot" immediately start tracking the issue:
 
  * For mailed reports, check if the reporter included a "regzbot command" like
-   ``#regzbot introduced 1f2e3d4c5b6a``. If not, send a reply (with the
+   ``#regzbot introduced: 1f2e3d4c5b6a``. If not, send a reply (with the
    regressions list in CC) with a paragraph like the following:::
 
        #regzbot ^introduced: v5.13..v5.14-rc1
@@ -398,9 +398,9 @@ By using a 'regzbot command' in a direct or indirect reply to the mail with the
 regression report. These commands need to be in their own paragraph (IOW: they
 need to be separated from the rest of the mail using blank lines).
 
-One such command is ``#regzbot introduced <version or commit>``, which makes
+One such command is ``#regzbot introduced: <version or commit>``, which makes
 regzbot consider your mail as a regressions report added to the tracking, as
-already described above; ``#regzbot ^introduced <version or commit>`` is another
+already described above; ``#regzbot ^introduced: <version or commit>`` is another
 such command, which makes regzbot consider the parent mail as a report for a
 regression which it starts to track.
 
@@ -432,7 +432,7 @@ or itself is a reply to that mail:
  * Mark a regression as fixed by a commit that is heading upstream or already
    landed::
 
-       #regzbot fixed-by: 1f2e3d4c5d
+       #regzbot fix: 1f2e3d4c5d
 
  * Mark a regression as a duplicate of another one already tracked by regzbot::
 
diff --git linux-libre-6.8-gnu/Documentation/process/howto.rst linux-libre-6.9-rc6-gnu/Documentation/process/howto.rst
index 6c73889c98fc..eebda4910a88 100644
--- linux-libre-6.8-gnu/Documentation/process/howto.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/howto.rst
@@ -351,8 +351,8 @@ Managing bug reports
 --------------------
 
 One of the best ways to put into practice your hacking skills is by fixing
-bugs reported by other people. Not only you will help to make the kernel
-more stable, but you'll also learn to fix real world problems and you will
+bugs reported by other people. Not only will you help to make the kernel
+more stable, but you'll also learn to fix real-world problems and you will
 improve your skills, and other developers will be aware of your presence.
 Fixing bugs is one of the best ways to get merits among other developers,
 because not many people like wasting time fixing other people's bugs.
diff --git linux-libre-6.8-gnu/Documentation/process/maintainer-tip.rst linux-libre-6.9-rc6-gnu/Documentation/process/maintainer-tip.rst
index 08dd0f804410..497bb39727c8 100644
--- linux-libre-6.8-gnu/Documentation/process/maintainer-tip.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/maintainer-tip.rst
@@ -304,13 +304,15 @@ following tag ordering scheme:
 
  - Reported-by: ``Reporter <reporter@mail>``
 
+ - Closes: ``URL or Message-ID of the bug report this is fixing``
+
  - Originally-by: ``Original author <original-author@mail>``
 
  - Suggested-by: ``Suggester <suggester@mail>``
 
  - Co-developed-by: ``Co-author <co-author@mail>``
 
-   Signed-off: ``Co-author <co-author@mail>``
+   Signed-off-by: ``Co-author <co-author@mail>``
 
    Note, that Co-developed-by and Signed-off-by of the co-author(s) must
    come in pairs.
@@ -478,7 +480,7 @@ Multi-line comments::
 	 * Larger multi-line comments should be split into paragraphs.
 	 */
 
-No tail comments:
+No tail comments (see below):
 
   Please refrain from using tail comments. Tail comments disturb the
   reading flow in almost all contexts, but especially in code::
@@ -499,6 +501,34 @@ No tail comments:
 	/* This magic initialization needs a comment. Maybe not? */
 	seed = MAGIC_CONSTANT;
 
+  Use C++ style, tail comments when documenting structs in headers to
+  achieve a more compact layout and better readability::
+
+        // eax
+        u32     x2apic_shift    :  5, // Number of bits to shift APIC ID right
+                                      // for the topology ID at the next level
+                                : 27; // Reserved
+        // ebx
+        u32     num_processors  : 16, // Number of processors at current level
+                                : 16; // Reserved
+
+  versus::
+
+	/* eax */
+	        /*
+	         * Number of bits to shift APIC ID right for the topology ID
+	         * at the next level
+	         */
+         u32     x2apic_shift    :  5,
+		 /* Reserved */
+				 : 27;
+
+	/* ebx */
+		/* Number of processors at current level */
+	u32     num_processors  : 16,
+		/* Reserved */
+				: 16;
+
 Comment the important things:
 
   Comments should be added where the operation is not obvious. Documenting
diff --git linux-libre-6.8-gnu/Documentation/process/researcher-guidelines.rst linux-libre-6.9-rc6-gnu/Documentation/process/researcher-guidelines.rst
index d159cd4f5e5b..beb484c5965d 100644
--- linux-libre-6.8-gnu/Documentation/process/researcher-guidelines.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/researcher-guidelines.rst
@@ -167,4 +167,4 @@ If no one can be found to internally review patches and you need
 help finding such a person, or if you have any other questions
 related to this document and the developer community's expectations,
 please reach out to the private Technical Advisory Board mailing list:
-<tech-board@lists.linux-foundation.org>.
+<tech-board@groups.linuxfoundation.org>.
diff --git linux-libre-6.8-gnu/Documentation/process/submit-checklist.rst linux-libre-6.9-rc6-gnu/Documentation/process/submit-checklist.rst
index b1bc2d37bd0a..e531dd504b6c 100644
--- linux-libre-6.8-gnu/Documentation/process/submit-checklist.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/process/submit-checklist.rst
@@ -1,7 +1,8 @@
 .. _submitchecklist:
 
+=======================================
 Linux Kernel patch submission checklist
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+=======================================
 
 Here are some basic things that developers should do if they want to see their
 kernel patch submissions accepted more quickly.
@@ -10,111 +11,123 @@ These are all above and beyond the documentation that is provided in
 :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
 and elsewhere regarding submitting Linux kernel patches.
 
+Review your code
+================
 
 1) If you use a facility then #include the file that defines/declares
    that facility.  Don't depend on other header files pulling in ones
    that you use.
 
-2) Builds cleanly:
+2) Check your patch for general style as detailed in
+   :ref:`Documentation/process/coding-style.rst <codingstyle>`.
 
-  a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and
-     ``=n``.  No ``gcc`` warnings/errors, no linker warnings/errors.
+3) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a
+   comment in the source code that explains the logic of what they are doing
+   and why.
 
-  b) Passes ``allnoconfig``, ``allmodconfig``
+Review Kconfig changes
+======================
 
-  c) Builds successfully when using ``O=builddir``
+1) Any new or modified ``CONFIG`` options do not muck up the config menu and
+   default to off unless they meet the exception criteria documented in
+   ``Documentation/kbuild/kconfig-language.rst`` Menu attributes: default value.
 
-  d) Any Documentation/ changes build successfully without new warnings/errors.
-     Use ``make htmldocs`` or ``make pdfdocs`` to check the build and
-     fix any issues.
+2) All new ``Kconfig`` options have help text.
 
-3) Builds on multiple CPU architectures by using local cross-compile tools
-   or some other build farm.
+3) Has been carefully reviewed with respect to relevant ``Kconfig``
+   combinations.  This is very hard to get right with testing---brainpower
+   pays off here.
 
-4) ppc64 is a good architecture for cross-compilation checking because it
-   tends to use ``unsigned long`` for 64-bit quantities.
+Provide documentation
+=====================
 
-5) Check your patch for general style as detailed in
-   :ref:`Documentation/process/coding-style.rst <codingstyle>`.
-   Check for trivial violations with the patch style checker prior to
-   submission (``scripts/checkpatch.pl``).
-   You should be able to justify all violations that remain in
-   your patch.
+1) Include :ref:`kernel-doc <kernel_doc>` to document global kernel APIs.
+   (Not required for static functions, but OK there also.)
 
-6) Any new or modified ``CONFIG`` options do not muck up the config menu and
-   default to off unless they meet the exception criteria documented in
-   ``Documentation/kbuild/kconfig-language.rst`` Menu attributes: default value.
+2) All new ``/proc`` entries are documented under ``Documentation/``
 
-7) All new ``Kconfig`` options have help text.
+3) All new kernel boot parameters are documented in
+   ``Documentation/admin-guide/kernel-parameters.rst``.
 
-8) Has been carefully reviewed with respect to relevant ``Kconfig``
-   combinations.  This is very hard to get right with testing -- brainpower
-   pays off here.
+4) All new module parameters are documented with ``MODULE_PARM_DESC()``
 
-9) Check cleanly with sparse.
+5) All new userspace interfaces are documented in ``Documentation/ABI/``.
+   See ``Documentation/ABI/README`` for more information.
+   Patches that change userspace interfaces should be CCed to
+   linux-api@vger.kernel.org.
 
-10) Use ``make checkstack`` and fix any problems that it finds.
+6) If any ioctl's are added by the patch, then also update
+   ``Documentation/userspace-api/ioctl/ioctl-number.rst``.
 
-    .. note::
+Check your code with tools
+==========================
 
-       ``checkstack`` does not point out problems explicitly,
-       but any one function that uses more than 512 bytes on the stack is a
-       candidate for change.
+1) Check for trivial violations with the patch style checker prior to
+   submission (``scripts/checkpatch.pl``).
+   You should be able to justify all violations that remain in
+   your patch.
 
-11) Include :ref:`kernel-doc <kernel_doc>` to document global  kernel APIs.
-    (Not required for static functions, but OK there also.) Use
-    ``make htmldocs`` or ``make pdfdocs`` to check the
-    :ref:`kernel-doc <kernel_doc>` and fix any issues.
+2) Check cleanly with sparse.
 
-12) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``,
-    ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``,
-    ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``,
-    ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all
-    simultaneously enabled.
+3) Use ``make checkstack`` and fix any problems that it finds.
+   Note that ``checkstack`` does not point out problems explicitly,
+   but any one function that uses more than 512 bytes on the stack is a
+   candidate for change.
 
-13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and
-    ``CONFIG_PREEMPT.``
+Build your code
+===============
 
-14) All codepaths have been exercised with all lockdep features enabled.
+1) Builds cleanly:
 
-15) All new ``/proc`` entries are documented under ``Documentation/``
+  a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and
+     ``=n``.  No ``gcc`` warnings/errors, no linker warnings/errors.
 
-16) All new kernel boot parameters are documented in
-    ``Documentation/admin-guide/kernel-parameters.rst``.
+  b) Passes ``allnoconfig``, ``allmodconfig``
+
+  c) Builds successfully when using ``O=builddir``
+
+  d) Any Documentation/ changes build successfully without new warnings/errors.
+     Use ``make htmldocs`` or ``make pdfdocs`` to check the build and
+     fix any issues.
 
-17) All new module parameters are documented with ``MODULE_PARM_DESC()``
+2) Builds on multiple CPU architectures by using local cross-compile tools
+   or some other build farm. Note that ppc64 is a good architecture for
+   cross-compilation checking because it tends to use ``unsigned long`` for
+   64-bit quantities.
 
-18) All new userspace interfaces are documented in ``Documentation/ABI/``.
-    See ``Documentation/ABI/README`` for more information.
-    Patches that change userspace interfaces should be CCed to
-    linux-api@vger.kernel.org.
+3) Newly-added code has been compiled with ``gcc -W`` (use
+   ``make KCFLAGS=-W``).  This will generate lots of noise, but is good
+   for finding bugs like "warning: comparison between signed and unsigned".
 
-19) Has been checked with injection of at least slab and page-allocation
-    failures.  See ``Documentation/fault-injection/``.
+4) If your modified source code depends on or uses any of the kernel
+   APIs or features that are related to the following ``Kconfig`` symbols,
+   then test multiple builds with the related ``Kconfig`` symbols disabled
+   and/or ``=m`` (if that option is available) [not all of these at the
+   same time, just various/random combinations of them]:
 
-    If the new code is substantial, addition of subsystem-specific fault
-    injection might be appropriate.
+   ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``,
+   ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``,
+   ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``).
 
-20) Newly-added code has been compiled with ``gcc -W`` (use
-    ``make KCFLAGS=-W``).  This will generate lots of noise, but is good
-    for finding bugs like "warning: comparison between signed and unsigned".
+Test your code
+==============
 
-21) Tested after it has been merged into the -mm patchset to make sure
-    that it still works with all of the other queued patches and various
-    changes in the VM, VFS, and other subsystems.
+1) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``,
+   ``CONFIG_SLUB_DEBUG``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``,
+   ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``,
+   ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all
+   simultaneously enabled.
 
-22) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a
-    comment in the source code that explains the logic of what they are doing
-    and why.
+2) Has been build- and runtime tested with and without ``CONFIG_SMP`` and
+   ``CONFIG_PREEMPT.``
 
-23) If any ioctl's are added by the patch, then also update
-    ``Documentation/userspace-api/ioctl/ioctl-number.rst``.
+3) All codepaths have been exercised with all lockdep features enabled.
 
-24) If your modified source code depends on or uses any of the kernel
-    APIs or features that are related to the following ``Kconfig`` symbols,
-    then test multiple builds with the related ``Kconfig`` symbols disabled
-    and/or ``=m`` (if that option is available) [not all of these at the
-    same time, just various/random combinations of them]:
+4) Has been checked with injection of at least slab and page-allocation
+   failures.  See ``Documentation/fault-injection/``.
+   If the new code is substantial, addition of subsystem-specific fault
+   injection might be appropriate.
 
-    ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``,
-    ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``).
+5) Tested with the most recent tag of linux-next to make sure that it still
+   works with all of the other queued patches and various changes in the VM,
+   VFS, and other subsystems.
diff --git linux-libre-6.8-gnu/Documentation/rust/arch-support.rst linux-libre-6.9-rc6-gnu/Documentation/rust/arch-support.rst
index 73203ba1e901..c9137710633a 100644
--- linux-libre-6.8-gnu/Documentation/rust/arch-support.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/rust/arch-support.rst
@@ -15,7 +15,8 @@ support corresponds to ``S`` values in the ``MAINTAINERS`` file.
 =============  ================  ==============================================
 Architecture   Level of support  Constraints
 =============  ================  ==============================================
-``loongarch``  Maintained        -
+``arm64``      Maintained        Little Endian only.
+``loongarch``  Maintained        \-
 ``um``         Maintained        ``x86_64`` only.
 ``x86``        Maintained        ``x86_64`` only.
 =============  ================  ==============================================
diff --git linux-libre-6.8-gnu/Documentation/rust/general-information.rst linux-libre-6.9-rc6-gnu/Documentation/rust/general-information.rst
index 236c6dd3c647..081397827a7e 100644
--- linux-libre-6.8-gnu/Documentation/rust/general-information.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/rust/general-information.rst
@@ -77,27 +77,3 @@ configuration:
 	#[cfg(CONFIG_X="y")]   // Enabled as a built-in (`y`)
 	#[cfg(CONFIG_X="m")]   // Enabled as a module   (`m`)
 	#[cfg(not(CONFIG_X))]  // Disabled
-
-
-Testing
--------
-
-There are the tests that come from the examples in the Rust documentation
-and get transformed into KUnit tests. These can be run via KUnit. For example
-via ``kunit_tool`` (``kunit.py``) on the command line::
-
-	./tools/testing/kunit/kunit.py run --make_options LLVM=1 --arch x86_64 --kconfig_add CONFIG_RUST=y
-
-Alternatively, KUnit can run them as kernel built-in at boot. Refer to
-Documentation/dev-tools/kunit/index.rst for the general KUnit documentation
-and Documentation/dev-tools/kunit/architecture.rst for the details of kernel
-built-in vs. command line testing.
-
-Additionally, there are the ``#[test]`` tests. These can be run using
-the ``rusttest`` Make target::
-
-	make LLVM=1 rusttest
-
-This requires the kernel ``.config`` and downloads external repositories.
-It runs the ``#[test]`` tests on the host (currently) and thus is fairly
-limited in what these tests can test.
diff --git linux-libre-6.8-gnu/Documentation/rust/index.rst linux-libre-6.9-rc6-gnu/Documentation/rust/index.rst
index 965f2db529e0..46d35bd395cf 100644
--- linux-libre-6.8-gnu/Documentation/rust/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/rust/index.rst
@@ -40,6 +40,7 @@ configurations.
     general-information
     coding-guidelines
     arch-support
+    testing
 
 .. only::  subproject and html
 
diff --git linux-libre-6.8-gnu/Documentation/rust/testing.rst linux-libre-6.9-rc6-gnu/Documentation/rust/testing.rst
new file mode 100644
index 000000000000..6658998d1b6c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/rust/testing.rst
@@ -0,0 +1,135 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Testing
+=======
+
+This document contains useful information how to test the Rust code in the
+kernel.
+
+There are two sorts of tests:
+
+- The KUnit tests.
+- The ``#[test]`` tests.
+
+The KUnit tests
+---------------
+
+These are the tests that come from the examples in the Rust documentation. They
+get transformed into KUnit tests.
+
+Usage
+*****
+
+These tests can be run via KUnit. For example via ``kunit_tool`` (``kunit.py``)
+on the command line::
+
+	./tools/testing/kunit/kunit.py run --make_options LLVM=1 --arch x86_64 --kconfig_add CONFIG_RUST=y
+
+Alternatively, KUnit can run them as kernel built-in at boot. Refer to
+Documentation/dev-tools/kunit/index.rst for the general KUnit documentation
+and Documentation/dev-tools/kunit/architecture.rst for the details of kernel
+built-in vs. command line testing.
+
+To use these KUnit doctests, the following must be enabled::
+
+	CONFIG_KUNIT
+	   Kernel hacking -> Kernel Testing and Coverage -> KUnit - Enable support for unit tests
+	CONFIG_RUST_KERNEL_DOCTESTS
+	   Kernel hacking -> Rust hacking -> Doctests for the `kernel` crate
+
+in the kernel config system.
+
+KUnit tests are documentation tests
+***********************************
+
+These documentation tests are typically examples of usage of any item (e.g.
+function, struct, module...).
+
+They are very convenient because they are just written alongside the
+documentation. For instance:
+
+.. code-block:: rust
+
+	/// Sums two numbers.
+	///
+	/// ```
+	/// assert_eq!(mymod::f(10, 20), 30);
+	/// ```
+	pub fn f(a: i32, b: i32) -> i32 {
+	    a + b
+	}
+
+In userspace, the tests are collected and run via ``rustdoc``. Using the tool
+as-is would be useful already, since it allows verifying that examples compile
+(thus enforcing they are kept in sync with the code they document) and as well
+as running those that do not depend on in-kernel APIs.
+
+For the kernel, however, these tests get transformed into KUnit test suites.
+This means that doctests get compiled as Rust kernel objects, allowing them to
+run against a built kernel.
+
+A benefit of this KUnit integration is that Rust doctests get to reuse existing
+testing facilities. For instance, the kernel log would look like::
+
+	KTAP version 1
+	1..1
+	    KTAP version 1
+	    # Subtest: rust_doctests_kernel
+	    1..59
+	    # rust_doctest_kernel_build_assert_rs_0.location: rust/kernel/build_assert.rs:13
+	    ok 1 rust_doctest_kernel_build_assert_rs_0
+	    # rust_doctest_kernel_build_assert_rs_1.location: rust/kernel/build_assert.rs:56
+	    ok 2 rust_doctest_kernel_build_assert_rs_1
+	    # rust_doctest_kernel_init_rs_0.location: rust/kernel/init.rs:122
+	    ok 3 rust_doctest_kernel_init_rs_0
+	    ...
+	    # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150
+	    ok 59 rust_doctest_kernel_types_rs_2
+	# rust_doctests_kernel: pass:59 fail:0 skip:0 total:59
+	# Totals: pass:59 fail:0 skip:0 total:59
+	ok 1 rust_doctests_kernel
+
+Tests using the `? <https://doc.rust-lang.org/reference/expressions/operator-expr.html#the-question-mark-operator>`_
+operator are also supported as usual, e.g.:
+
+.. code-block:: rust
+
+	/// ```
+	/// # use kernel::{spawn_work_item, workqueue};
+	/// spawn_work_item!(workqueue::system(), || pr_info!("x"))?;
+	/// # Ok::<(), Error>(())
+	/// ```
+
+The tests are also compiled with Clippy under ``CLIPPY=1``, just like normal
+code, thus also benefitting from extra linting.
+
+In order for developers to easily see which line of doctest code caused a
+failure, a KTAP diagnostic line is printed to the log. This contains the
+location (file and line) of the original test (i.e. instead of the location in
+the generated Rust file)::
+
+	# rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150
+
+Rust tests appear to assert using the usual ``assert!`` and ``assert_eq!``
+macros from the Rust standard library (``core``). We provide a custom version
+that forwards the call to KUnit instead. Importantly, these macros do not
+require passing context, unlike those for KUnit testing (i.e.
+``struct kunit *``). This makes them easier to use, and readers of the
+documentation do not need to care about which testing framework is used. In
+addition, it may allow us to test third-party code more easily in the future.
+
+A current limitation is that KUnit does not support assertions in other tasks.
+Thus, we presently simply print an error to the kernel log if an assertion
+actually failed. Additionally, doctests are not run for nonpublic functions.
+
+The ``#[test]`` tests
+---------------------
+
+Additionally, there are the ``#[test]`` tests. These can be run using the
+``rusttest`` Make target::
+
+	make LLVM=1 rusttest
+
+This requires the kernel ``.config`` and downloads external repositories. It
+runs the ``#[test]`` tests on the host (currently) and thus is fairly limited in
+what these tests can test.
diff --git linux-libre-6.8-gnu/Documentation/scheduler/index.rst linux-libre-6.9-rc6-gnu/Documentation/scheduler/index.rst
index 3170747226f6..43bd8a145b7a 100644
--- linux-libre-6.8-gnu/Documentation/scheduler/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/scheduler/index.rst
@@ -7,6 +7,7 @@ Scheduler
 
 
     completion
+    membarrier
     sched-arch
     sched-bwc
     sched-deadline
diff --git linux-libre-6.8-gnu/Documentation/scheduler/membarrier.rst linux-libre-6.9-rc6-gnu/Documentation/scheduler/membarrier.rst
new file mode 100644
index 000000000000..2387804b1c63
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/scheduler/membarrier.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+membarrier() System Call
+========================
+
+MEMBARRIER_CMD_{PRIVATE,GLOBAL}_EXPEDITED - Architecture requirements
+=====================================================================
+
+Memory barriers before updating rq->curr
+----------------------------------------
+
+The commands MEMBARRIER_CMD_PRIVATE_EXPEDITED and MEMBARRIER_CMD_GLOBAL_EXPEDITED
+require each architecture to have a full memory barrier after coming from
+user-space, before updating rq->curr.  This barrier is implied by the sequence
+rq_lock(); smp_mb__after_spinlock() in __schedule().  The barrier matches a full
+barrier in the proximity of the membarrier system call exit, cf.
+membarrier_{private,global}_expedited().
+
+Memory barriers after updating rq->curr
+---------------------------------------
+
+The commands MEMBARRIER_CMD_PRIVATE_EXPEDITED and MEMBARRIER_CMD_GLOBAL_EXPEDITED
+require each architecture to have a full memory barrier after updating rq->curr,
+before returning to user-space.  The schemes providing this barrier on the various
+architectures are as follows.
+
+ - alpha, arc, arm, hexagon, mips rely on the full barrier implied by
+   spin_unlock() in finish_lock_switch().
+
+ - arm64 relies on the full barrier implied by switch_to().
+
+ - powerpc, riscv, s390, sparc, x86 rely on the full barrier implied by
+   switch_mm(), if mm is not NULL; they rely on the full barrier implied
+   by mmdrop(), otherwise.  On powerpc and riscv, switch_mm() relies on
+   membarrier_arch_switch_mm().
+
+The barrier matches a full barrier in the proximity of the membarrier system call
+entry, cf. membarrier_{private,global}_expedited().
diff --git linux-libre-6.8-gnu/Documentation/scheduler/sched-design-CFS.rst linux-libre-6.9-rc6-gnu/Documentation/scheduler/sched-design-CFS.rst
index 6cffffe26500..e030876fbd68 100644
--- linux-libre-6.8-gnu/Documentation/scheduler/sched-design-CFS.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/scheduler/sched-design-CFS.rst
@@ -100,6 +100,9 @@ which can be used to tune the scheduler from "desktop" (i.e., low latencies) to
 "server" (i.e., good batching) workloads.  It defaults to a setting suitable
 for desktop workloads.  SCHED_BATCH is handled by the CFS scheduler module too.
 
+In case CONFIG_HZ results in base_slice_ns < TICK_NSEC, the value of
+base_slice_ns will have little to no impact on the workloads.
+
 Due to its design, the CFS scheduler is not prone to any of the "attacks" that
 exist today against the heuristics of the stock scheduler: fiftyp.c, thud.c,
 chew.c, ring-test.c, massive_intr.c all work fine and do not impact
diff --git linux-libre-6.8-gnu/Documentation/sound/kernel-api/writing-an-alsa-driver.rst linux-libre-6.9-rc6-gnu/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index cd421856409e..2d2998faff62 100644
--- linux-libre-6.8-gnu/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3864,14 +3864,16 @@ corresponding destructor.
 
 And next, set suspend/resume callbacks to the pci_driver::
 
-  static SIMPLE_DEV_PM_OPS(snd_my_pm_ops, mychip_suspend, mychip_resume);
+  static DEFINE_SIMPLE_DEV_PM_OPS(snd_my_pm_ops, mychip_suspend, mychip_resume);
 
   static struct pci_driver driver = {
           .name = KBUILD_MODNAME,
           .id_table = snd_my_ids,
           .probe = snd_my_probe,
           .remove = snd_my_remove,
-          .driver.pm = &snd_my_pm_ops,
+          .driver = {
+                  .pm = &snd_my_pm_ops,
+          },
   };
 
 Module Parameters
diff --git linux-libre-6.8-gnu/Documentation/sphinx/kerneldoc-preamble.sty linux-libre-6.9-rc6-gnu/Documentation/sphinx/kerneldoc-preamble.sty
index 9707e033c8c4..3092df051c95 100644
--- linux-libre-6.8-gnu/Documentation/sphinx/kerneldoc-preamble.sty
+++ linux-libre-6.9-rc6-gnu/Documentation/sphinx/kerneldoc-preamble.sty
@@ -54,9 +54,7 @@
 \renewcommand*\l@section{\@dottedtocline{1}{2.4em}{3.2em}}
 \renewcommand*\l@subsection{\@dottedtocline{2}{5.6em}{4.3em}}
 \makeatother
-%% Sphinx < 1.8 doesn't have \sphinxtableofcontentshook
-\providecommand{\sphinxtableofcontentshook}{}
-%% Undefine it for compatibility with Sphinx 1.7.9
+%% Prevent default \sphinxtableofcontentshook from overwriting above tweaks.
 \renewcommand{\sphinxtableofcontentshook}{} % Empty the hook
 
 % Prevent column squeezing of tabulary.  \tymin is set by Sphinx as:
@@ -136,9 +134,6 @@
     }
     \newCJKfontfamily[JPsans]\jpsans{Noto Sans CJK JP}[AutoFakeSlant]
     \newCJKfontfamily[JPmono]\jpmono{Noto Sans Mono CJK JP}[AutoFakeSlant]
-    % Dummy commands for Sphinx < 2.3 (no 'extrapackages' support)
-    \providecommand{\onehalfspacing}{}
-    \providecommand{\singlespacing}{}
     % Define custom macros to on/off CJK
     %% One and half spacing for CJK contents
     \newcommand{\kerneldocCJKon}{\makexeCJKactive\onehalfspacing}
diff --git linux-libre-6.8-gnu/Documentation/sphinx/kerneldoc.py linux-libre-6.9-rc6-gnu/Documentation/sphinx/kerneldoc.py
index 7acf09963daa..ec1ddfff1863 100644
--- linux-libre-6.8-gnu/Documentation/sphinx/kerneldoc.py
+++ linux-libre-6.9-rc6-gnu/Documentation/sphinx/kerneldoc.py
@@ -61,9 +61,9 @@ class KernelDocDirective(Directive):
         env = self.state.document.settings.env
         cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno']
 
-	# Pass the version string to kernel-doc, as it needs to use a different
-	# dialect, depending what the C domain supports for each specific
-	# Sphinx versions
+        # Pass the version string to kernel-doc, as it needs to use a different
+        # dialect, depending what the C domain supports for each specific
+        # Sphinx versions
         cmd += ['-sphinx-version', sphinx.__version__]
 
         filename = env.config.kerneldoc_srctree + '/' + self.arguments[0]
diff --git linux-libre-6.8-gnu/Documentation/sphinx/requirements.txt linux-libre-6.9-rc6-gnu/Documentation/sphinx/requirements.txt
index 5d47ed443949..5017f307c8a4 100644
--- linux-libre-6.8-gnu/Documentation/sphinx/requirements.txt
+++ linux-libre-6.9-rc6-gnu/Documentation/sphinx/requirements.txt
@@ -1,6 +1,3 @@
-# jinja2>=3.1 is not compatible with Sphinx<4.0
-jinja2<3.1
-# alabaster>=0.7.14 is not compatible with Sphinx<=3.3
-alabaster<0.7.14
-Sphinx==2.4.4
+alabaster
+Sphinx
 pyyaml
diff --git linux-libre-6.8-gnu/Documentation/spi/spi-lm70llp.rst linux-libre-6.9-rc6-gnu/Documentation/spi/spi-lm70llp.rst
index 2f20e5b405e6..ff98ddc76a74 100644
--- linux-libre-6.8-gnu/Documentation/spi/spi-lm70llp.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/spi/spi-lm70llp.rst
@@ -6,7 +6,7 @@ Supported board/chip:
 
   * National Semiconductor LM70 LLP evaluation board
 
-    Datasheet: http://www.national.com/pf/LM/LM70.html
+    Datasheet: https://www.ti.com/lit/gpn/lm70
 
 Author:
         Kaiwan N Billimoria <kaiwan@designergraphix.com>
@@ -28,7 +28,7 @@ Hardware Interfacing
 The schematic for this particular board (the LM70EVAL-LLP) is
 available (on page 4) here:
 
-  http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf
+  https://download.datasheets.com/pdfs/documentation/nat/kit&board/lm70llpevalmanual.pdf
 
 The hardware interfacing on the LM70 LLP eval board is as follows:
 
diff --git linux-libre-6.8-gnu/Documentation/spi/spi-summary.rst linux-libre-6.9-rc6-gnu/Documentation/spi/spi-summary.rst
index 33f05901ccf3..546de37d6caf 100644
--- linux-libre-6.8-gnu/Documentation/spi/spi-summary.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/spi/spi-summary.rst
@@ -9,7 +9,7 @@ What is SPI?
 The "Serial Peripheral Interface" (SPI) is a synchronous four wire serial
 link used to connect microcontrollers to sensors, memory, and peripherals.
 It's a simple "de facto" standard, not complicated enough to acquire a
-standardization body.  SPI uses a master/slave configuration.
+standardization body.  SPI uses a host/target configuration.
 
 The three signal wires hold a clock (SCK, often on the order of 10 MHz),
 and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In,
@@ -19,14 +19,14 @@ commonly used.  Each clock cycle shifts data out and data in; the clock
 doesn't cycle except when there is a data bit to shift.  Not all data bits
 are used though; not every protocol uses those full duplex capabilities.
 
-SPI masters use a fourth "chip select" line to activate a given SPI slave
+SPI hosts use a fourth "chip select" line to activate a given SPI target
 device, so those three signal wires may be connected to several chips
-in parallel.  All SPI slaves support chipselects; they are usually active
-low signals, labeled nCSx for slave 'x' (e.g. nCS0).  Some devices have
-other signals, often including an interrupt to the master.
+in parallel.  All SPI targets support chipselects; they are usually active
+low signals, labeled nCSx for target 'x' (e.g. nCS0).  Some devices have
+other signals, often including an interrupt to the host.
 
 Unlike serial busses like USB or SMBus, even low level protocols for
-SPI slave functions are usually not interoperable between vendors
+SPI target functions are usually not interoperable between vendors
 (except for commodities like SPI memory chips).
 
   - SPI may be used for request/response style device protocols, as with
@@ -43,10 +43,10 @@ SPI slave functions are usually not interoperable between vendors
 
   - Sometimes SPI is used to daisy-chain devices, like shift registers.
 
-In the same way, SPI slaves will only rarely support any kind of automatic
-discovery/enumeration protocol.  The tree of slave devices accessible from
-a given SPI master will normally be set up manually, with configuration
-tables.
+In the same way, SPI targets will only rarely support any kind of automatic
+discovery/enumeration protocol. The tree of target devices accessible from
+a given SPI host controller will normally be set up manually, with
+configuration tables.
 
 SPI is only one of the names used by such four-wire protocols, and
 most controllers have no problem handling "MicroWire" (think of it as
@@ -62,8 +62,8 @@ course they won't handle full duplex transfers.  You may find such
 chips described as using "three wire" signaling: SCK, data, nCSx.
 (That data line is sometimes called MOMI or SISO.)
 
-Microcontrollers often support both master and slave sides of the SPI
-protocol.  This document (and Linux) supports both the master and slave
+Microcontrollers often support both host and target sides of the SPI
+protocol.  This document (and Linux) supports both the host and target
 sides of SPI interactions.
 
 
@@ -75,7 +75,7 @@ protocol supported by every MMC or SD memory card.  (The older "DataFlash"
 cards, predating MMC cards but using the same connectors and card shape,
 support only SPI.)  Some PC hardware uses SPI flash for BIOS code.
 
-SPI slave chips range from digital/analog converters used for analog
+SPI target chips range from digital/analog converters used for analog
 sensors and codecs, to memory, to peripherals like USB controllers
 or Ethernet adapters; and more.
 
@@ -118,8 +118,8 @@ starting low (CPOL=0) and data stabilized for sampling during the
 trailing clock edge (CPHA=1), that's SPI mode 1.
 
 Note that the clock mode is relevant as soon as the chipselect goes
-active.  So the master must set the clock to inactive before selecting
-a slave, and the slave can tell the chosen polarity by sampling the
+active.  So the host must set the clock to inactive before selecting
+a target, and the target can tell the chosen polarity by sampling the
 clock level when its select line goes active.  That's why many devices
 support for example both modes 0 and 3:  they don't care about polarity,
 and always clock data in/out on rising clock edges.
@@ -142,13 +142,13 @@ There are two types of SPI driver, here called:
 
   Controller drivers ...
         controllers may be built into System-On-Chip
-	processors, and often support both Master and Slave roles.
+	processors, and often support both Controller and target roles.
 	These drivers touch hardware registers and may use DMA.
 	Or they can be PIO bitbangers, needing just GPIO pins.
 
   Protocol drivers ...
         these pass messages through the controller
-	driver to communicate with a Slave or Master device on the
+	driver to communicate with a target or Controller device on the
 	other side of an SPI link.
 
 So for example one protocol driver might talk to the MTD layer to export
@@ -179,22 +179,22 @@ shows up in sysfs in several locations::
    /sys/bus/spi/drivers/D ... driver for one or more spi*.* devices
 
    /sys/class/spi_master/spiB ... symlink to a logical node which could hold
-	class related state for the SPI master controller managing bus "B".
+	class related state for the SPI host controller managing bus "B".
 	All spiB.* devices share one physical SPI bus segment, with SCLK,
 	MOSI, and MISO.
 
    /sys/devices/.../CTLR/slave ... virtual file for (un)registering the
-	slave device for an SPI slave controller.
-	Writing the driver name of an SPI slave handler to this file
-	registers the slave device; writing "(null)" unregisters the slave
+	target device for an SPI target controller.
+	Writing the driver name of an SPI target handler to this file
+	registers the target device; writing "(null)" unregisters the target
 	device.
-	Reading from this file shows the name of the slave device ("(null)"
+	Reading from this file shows the name of the target device ("(null)"
 	if not registered).
 
    /sys/class/spi_slave/spiB ... symlink to a logical node which could hold
-	class related state for the SPI slave controller on bus "B".  When
+	class related state for the SPI target controller on bus "B".  When
 	registered, a single spiB.* device is present here, possible sharing
-	the physical SPI bus segment with other SPI slave devices.
+	the physical SPI bus segment with other SPI target devices.
 
 At this time, the only class-specific state is the bus number ("B" in "spiB"),
 so those /sys/class entries are only useful to quickly identify busses.
@@ -270,10 +270,10 @@ same SOC controller is used.  For example, on one board SPI might use
 an external clock, where another derives the SPI clock from current
 settings of some master clock.
 
-Declare Slave Devices
-^^^^^^^^^^^^^^^^^^^^^
+Declare target Devices
+^^^^^^^^^^^^^^^^^^^^^^
 
-The second kind of information is a list of what SPI slave devices exist
+The second kind of information is a list of what SPI target devices exist
 on the target board, often with some board-specific data needed for the
 driver to work correctly.
 
@@ -316,7 +316,7 @@ sharing a bus with a device that interprets chipselect "backwards" is
 not possible until the infrastructure knows how to deselect it.
 
 Then your board initialization code would register that table with the SPI
-infrastructure, so that it's available later when the SPI master controller
+infrastructure, so that it's available later when the SPI host controller
 driver is registered::
 
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
@@ -469,39 +469,39 @@ routines are available to allocate and zero-initialize an spi_message
 with several transfers.
 
 
-How do I write an "SPI Master Controller Driver"?
+How do I write an "SPI Controller Driver"?
 -------------------------------------------------
 An SPI controller will probably be registered on the platform_bus; write
 a driver to bind to the device, whichever bus is involved.
 
-The main task of this type of driver is to provide an "spi_master".
-Use spi_alloc_master() to allocate the master, and spi_master_get_devdata()
-to get the driver-private data allocated for that device.
+The main task of this type of driver is to provide an "spi_controller".
+Use spi_alloc_host() to allocate the host controller, and
+spi_controller_get_devdata() to get the driver-private data allocated for that
+device.
 
 ::
 
-	struct spi_master	*master;
+	struct spi_controller	*ctlr;
 	struct CONTROLLER	*c;
 
-	master = spi_alloc_master(dev, sizeof *c);
-	if (!master)
+	ctlr = spi_alloc_host(dev, sizeof *c);
+	if (!ctlr)
 		return -ENODEV;
 
-	c = spi_master_get_devdata(master);
+	c = spi_controller_get_devdata(ctlr);
 
-The driver will initialize the fields of that spi_master, including the
-bus number (maybe the same as the platform device ID) and three methods
-used to interact with the SPI core and SPI protocol drivers.  It will
-also initialize its own internal state.  (See below about bus numbering
-and those methods.)
+The driver will initialize the fields of that spi_controller, including the bus
+number (maybe the same as the platform device ID) and three methods used to
+interact with the SPI core and SPI protocol drivers.  It will also initialize
+its own internal state.  (See below about bus numbering and those methods.)
 
-After you initialize the spi_master, then use spi_register_master() to
+After you initialize the spi_controller, then use spi_register_controller() to
 publish it to the rest of the system. At that time, device nodes for the
 controller and any predeclared spi devices will be made available, and
 the driver model core will take care of binding them to drivers.
 
-If you need to remove your SPI controller driver, spi_unregister_master()
-will reverse the effect of spi_register_master().
+If you need to remove your SPI controller driver, spi_unregister_controller()
+will reverse the effect of spi_register_controller().
 
 
 Bus Numbering
@@ -519,49 +519,49 @@ then be replaced by a dynamically assigned number. You'd then need to treat
 this as a non-static configuration (see above).
 
 
-SPI Master Methods
-^^^^^^^^^^^^^^^^^^
+SPI Host Controller Methods
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-``master->setup(struct spi_device *spi)``
+``ctlr->setup(struct spi_device *spi)``
 	This sets up the device clock rate, SPI mode, and word sizes.
 	Drivers may change the defaults provided by board_info, and then
 	call spi_setup(spi) to invoke this routine.  It may sleep.
 
-	Unless each SPI slave has its own configuration registers, don't
+	Unless each SPI target has its own configuration registers, don't
 	change them right away ... otherwise drivers could corrupt I/O
 	that's in progress for other SPI devices.
 
 	.. note::
 
 		BUG ALERT:  for some reason the first version of
-		many spi_master drivers seems to get this wrong.
+		many spi_controller drivers seems to get this wrong.
 		When you code setup(), ASSUME that the controller
 		is actively processing transfers for another device.
 
-``master->cleanup(struct spi_device *spi)``
+``ctlr->cleanup(struct spi_device *spi)``
 	Your controller driver may use spi_device.controller_state to hold
 	state it dynamically associates with that device.  If you do that,
 	be sure to provide the cleanup() method to free that state.
 
-``master->prepare_transfer_hardware(struct spi_master *master)``
+``ctlr->prepare_transfer_hardware(struct spi_controller *ctlr)``
 	This will be called by the queue mechanism to signal to the driver
 	that a message is coming in soon, so the subsystem requests the
 	driver to prepare the transfer hardware by issuing this call.
 	This may sleep.
 
-``master->unprepare_transfer_hardware(struct spi_master *master)``
+``ctlr->unprepare_transfer_hardware(struct spi_controller *ctlr)``
 	This will be called by the queue mechanism to signal to the driver
 	that there are no more messages pending in the queue and it may
 	relax the hardware (e.g. by power management calls). This may sleep.
 
-``master->transfer_one_message(struct spi_master *master, struct spi_message *mesg)``
+``ctlr->transfer_one_message(struct spi_controller *ctlr, struct spi_message *mesg)``
 	The subsystem calls the driver to transfer a single message while
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this message, it must call
 	spi_finalize_current_message() so the subsystem can issue the next
 	message. This may sleep.
 
-``master->transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer)``
+``ctrl->transfer_one(struct spi_controller *ctlr, struct spi_device *spi, struct spi_transfer *transfer)``
 	The subsystem calls the driver to transfer a single transfer while
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this transfer, it must call
@@ -576,15 +576,15 @@ SPI Master Methods
 	* 0: transfer is finished
 	* 1: transfer is still in progress
 
-``master->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, u8 hold_clk_cycles, u8 inactive_clk_cycles)``
-	This method allows SPI client drivers to request SPI master controller
+``ctrl->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, u8 hold_clk_cycles, u8 inactive_clk_cycles)``
+	This method allows SPI client drivers to request SPI host controller
 	for configuring device specific CS setup, hold and inactive timing
 	requirements.
 
 Deprecated Methods
 ^^^^^^^^^^^^^^^^^^
 
-``master->transfer(struct spi_device *spi, struct spi_message *message)``
+``ctrl->transfer(struct spi_device *spi, struct spi_message *message)``
 	This must not sleep. Its responsibility is to arrange that the
 	transfer happens and its complete() callback is issued. The two
 	will normally happen later, after other transfers complete, and
diff --git linux-libre-6.8-gnu/Documentation/spi/spidev.rst linux-libre-6.9-rc6-gnu/Documentation/spi/spidev.rst
index 369c657ba435..e08b301ad24a 100644
--- linux-libre-6.8-gnu/Documentation/spi/spidev.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/spi/spidev.rst
@@ -61,7 +61,7 @@ the spidev driver failing to probe.
 
 Sysfs also supports userspace driven binding/unbinding of drivers to
 devices that do not bind automatically using one of the tables above.
-To make the spidev driver bind to such a device, use the following:
+To make the spidev driver bind to such a device, use the following::
 
     echo spidev > /sys/bus/spi/devices/spiB.C/driver_override
     echo spiB.C > /sys/bus/spi/drivers/spidev/bind
diff --git linux-libre-6.8-gnu/Documentation/staging/rpmsg.rst linux-libre-6.9-rc6-gnu/Documentation/staging/rpmsg.rst
index dba3e5f65612..3713adaa1608 100644
--- linux-libre-6.8-gnu/Documentation/staging/rpmsg.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/staging/rpmsg.rst
@@ -157,7 +157,7 @@ Returns 0 on success and an appropriate error value on failure.
   int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
 
 
-sends a message across to the remote processor from a given endoint,
+sends a message across to the remote processor from a given endpoint,
 to a destination address provided by the user.
 
 The user should specify the channel, the data it wants to send,
diff --git linux-libre-6.8-gnu/Documentation/subsystem-apis.rst linux-libre-6.9-rc6-gnu/Documentation/subsystem-apis.rst
index 2d353fb8ea26..74af50d2ef7f 100644
--- linux-libre-6.8-gnu/Documentation/subsystem-apis.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/subsystem-apis.rst
@@ -61,6 +61,8 @@ Storage interfaces
    scsi/index
    target/index
 
+Other subsystems
+----------------
 **Fixme**: much more organizational work is needed here.
 
 .. toctree::
diff --git linux-libre-6.8-gnu/Documentation/timers/no_hz.rst linux-libre-6.9-rc6-gnu/Documentation/timers/no_hz.rst
index f8786be15183..7fe8ef9718d8 100644
--- linux-libre-6.8-gnu/Documentation/timers/no_hz.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/timers/no_hz.rst
@@ -129,11 +129,8 @@ adaptive-tick CPUs:  At least one non-adaptive-tick CPU must remain
 online to handle timekeeping tasks in order to ensure that system
 calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
 (This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
-user processes to observe slight drifts in clock rate.)  Therefore, the
-boot CPU is prohibited from entering adaptive-ticks mode.  Specifying a
-"nohz_full=" mask that includes the boot CPU will result in a boot-time
-error message, and the boot CPU will be removed from the mask.  Note that
-this means that your system must have at least two CPUs in order for
+user processes to observe slight drifts in clock rate.) Note that this
+means that your system must have at least two CPUs in order for
 CONFIG_NO_HZ_FULL=y to do anything for you.
 
 Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
diff --git linux-libre-6.8-gnu/Documentation/tools/rtla/common_timerlat_options.rst linux-libre-6.9-rc6-gnu/Documentation/tools/rtla/common_timerlat_options.rst
index 88506b397c2d..d3255ed70195 100644
--- linux-libre-6.8-gnu/Documentation/tools/rtla/common_timerlat_options.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/tools/rtla/common_timerlat_options.rst
@@ -33,3 +33,9 @@
         to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again
         adding so the measurement for the kernel-to-user and user-to-kernel to the tracer
         output.
+
+**-U**, **--user-load**
+
+        Set timerlat to run without workload, waiting for the user to dispatch a per-cpu
+        task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd.
+        See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code.
diff --git linux-libre-6.8-gnu/Documentation/trace/fprobetrace.rst linux-libre-6.9-rc6-gnu/Documentation/trace/fprobetrace.rst
index e35e6b18df40..0f187e3796e4 100644
--- linux-libre-6.8-gnu/Documentation/trace/fprobetrace.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/trace/fprobetrace.rst
@@ -70,6 +70,14 @@ Synopsis of fprobe-events
 
 For the details of TYPE, see :ref:`kprobetrace documentation <kprobetrace_types>`.
 
+Function arguments at exit
+--------------------------
+Function arguments can be accessed at exit probe using $arg<N> fetcharg. This
+is useful to record the function parameter and return value at once, and
+trace the difference of structure fields (for debuging a function whether it
+correctly updates the given data structure or not)
+See the :ref:`sample<fprobetrace_exit_args_sample>` below for how it works.
+
 BTF arguments
 -------------
 BTF (BPF Type Format) argument allows user to trace function and tracepoint
@@ -218,3 +226,26 @@ traceprobe event, you can trace that field as below.
            <idle>-0       [000] d..3.  5606.690317: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000
       kworker/0:1-14      [000] d..3.  5606.690339: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
            <idle>-0       [000] d..3.  5606.692368: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000
+
+.. _fprobetrace_exit_args_sample:
+
+The return probe allows us to access the results of some functions, which returns
+the error code and its results are passed via function parameter, such as an
+structure-initialization function.
+
+For example, vfs_open() will link the file structure to the inode and update
+mode. You can trace that changes with return probe.
+::
+
+ # echo 'f vfs_open mode=file->f_mode:x32 inode=file->f_inode:x64' >> dynamic_events
+ # echo 'f vfs_open%%return mode=file->f_mode:x32 inode=file->f_inode:x64' >> dynamic_events
+ # echo 1 > events/fprobes/enable
+ # cat trace
+              sh-131     [006] ...1.  1945.714346: vfs_open__entry: (vfs_open+0x4/0x40) mode=0x2 inode=0x0
+              sh-131     [006] ...1.  1945.714358: vfs_open__exit: (do_open+0x274/0x3d0 <- vfs_open) mode=0x4d801e inode=0xffff888008470168
+             cat-143     [007] ...1.  1945.717949: vfs_open__entry: (vfs_open+0x4/0x40) mode=0x1 inode=0x0
+             cat-143     [007] ...1.  1945.717956: vfs_open__exit: (do_open+0x274/0x3d0 <- vfs_open) mode=0x4a801d inode=0xffff888005f78d28
+             cat-143     [007] ...1.  1945.720616: vfs_open__entry: (vfs_open+0x4/0x40) mode=0x1 inode=0x0
+             cat-143     [007] ...1.  1945.728263: vfs_open__exit: (do_open+0x274/0x3d0 <- vfs_open) mode=0xa800d inode=0xffff888004ada8d8
+
+You can see the `file::f_mode` and `file::f_inode` are upated in `vfs_open()`.
diff --git linux-libre-6.8-gnu/Documentation/trace/kprobetrace.rst linux-libre-6.9-rc6-gnu/Documentation/trace/kprobetrace.rst
index bf9cecb69fc9..a49662ccd53c 100644
--- linux-libre-6.8-gnu/Documentation/trace/kprobetrace.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/trace/kprobetrace.rst
@@ -70,6 +70,15 @@ Synopsis of kprobe_events
   (\*3) this is useful for fetching a field of data structures.
   (\*4) "u" means user-space dereference. See :ref:`user_mem_access`.
 
+Function arguments at kretprobe
+-------------------------------
+Function arguments can be accessed at kretprobe using $arg<N> fetcharg. This
+is useful to record the function parameter and return value at once, and
+trace the difference of structure fields (for debuging a function whether it
+correctly updates the given data structure or not).
+See the :ref:`sample<fprobetrace_exit_args_sample>` in fprobe event for how
+it works.
+
 .. _kprobetrace_types:
 
 Types
diff --git linux-libre-6.8-gnu/Documentation/trace/user_events.rst linux-libre-6.9-rc6-gnu/Documentation/trace/user_events.rst
index d8f12442aaa6..1d5a7626e6a6 100644
--- linux-libre-6.8-gnu/Documentation/trace/user_events.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/trace/user_events.rst
@@ -92,6 +92,24 @@ The following flags are currently supported.
   process closes or unregisters the event. Requires CAP_PERFMON otherwise
   -EPERM is returned.
 
++ USER_EVENT_REG_MULTI_FORMAT: The event can contain multiple formats. This
+  allows programs to prevent themselves from being blocked when their event
+  format changes and they wish to use the same name. When this flag is used the
+  tracepoint name will be in the new format of "name.unique_id" vs the older
+  format of "name". A tracepoint will be created for each unique pair of name
+  and format. This means if several processes use the same name and format,
+  they will use the same tracepoint. If yet another process uses the same name,
+  but a different format than the other processes, it will use a different
+  tracepoint with a new unique id. Recording programs need to scan tracefs for
+  the various different formats of the event name they are interested in
+  recording. The system name of the tracepoint will also use "user_events_multi"
+  instead of "user_events". This prevents single-format event names conflicting
+  with any multi-format event names within tracefs. The unique_id is output as
+  a hex string. Recording programs should ensure the tracepoint name starts with
+  the event name they registered and has a suffix that starts with . and only
+  has hex characters. For example to find all versions of the event "test" you
+  can use the regex "^test\.[0-9a-fA-F]+$".
+
 Upon successful registration the following is set.
 
 + write_index: The index to use for this file descriptor that represents this
@@ -106,6 +124,9 @@ or perf record -e user_events:[name] when attaching/recording.
 **NOTE:** The event subsystem name by default is "user_events". Callers should
 not assume it will always be "user_events". Operators reserve the right in the
 future to change the subsystem name per-process to accommodate event isolation.
+In addition if the USER_EVENT_REG_MULTI_FORMAT flag is used the tracepoint name
+will have a unique id appended to it and the system name will be
+"user_events_multi" as described above.
 
 Command Format
 ^^^^^^^^^^^^^^
@@ -156,7 +177,11 @@ to request deletes than the one used for registration due to this.
 to the event. If programs do not want auto-delete, they must use the
 USER_EVENT_REG_PERSIST flag when registering the event. Once that flag is used
 the event exists until DIAG_IOCSDEL is invoked. Both register and delete of an
-event that persists requires CAP_PERFMON, otherwise -EPERM is returned.
+event that persists requires CAP_PERFMON, otherwise -EPERM is returned. When
+there are multiple formats of the same event name, all events with the same
+name will be attempted to be deleted. If only a specific version is wanted to
+be deleted then the /sys/kernel/tracing/dynamic_events file should be used for
+that specific format of the event.
 
 Unregistering
 -------------
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/RCU/index.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/RCU/index.rst
new file mode 100644
index 000000000000..22adf1d58752
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/RCU/index.rst
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _it_rcu_concepts:
+
+===============
+Concetti su RCU
+===============
+
+.. toctree::
+   :maxdepth: 3
+
+   torture
+
+.. only:: subproject and html
+
+   Indici
+   ======
+
+   * :ref:`genindex`
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/RCU/torture.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/RCU/torture.rst
new file mode 100644
index 000000000000..189f7c6caebc
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/RCU/torture.rst
@@ -0,0 +1,369 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-ita.rst
+
+=============================================
+Le operazioni RCU per le verifiche *torture*
+=============================================
+
+CONFIG_RCU_TORTURE_TEST
+=======================
+
+L'opzione CONFIG_RCU_TORTURE_TEST è disponibile per tutte le implementazione di
+RCU. L'opzione creerà un modulo rcutorture che potrete caricare per avviare le
+verifiche. La verifica userà printk() per riportare lo stato, dunque potrete
+visualizzarlo con dmesg (magari usate grep per filtrare "torture"). Le verifiche
+inizieranno al caricamento, e si fermeranno alla sua rimozione.
+
+I parametri di modulo hanno tutti il prefisso "rcutortute.", vedere
+Documentation/admin-guide/kernel-parameters.txt.
+
+Rapporto
+========
+
+Il rapporto sulle verifiche si presenta nel seguente modo::
+
+	rcu-torture:--- Start of test: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
+	rcu-torture: rtc:           (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767
+	rcu-torture: Reader Pipe:  727860534 34213 0 0 0 0 0 0 0 0 0
+	rcu-torture: Reader Batch:  727877838 17003 0 0 0 0 0 0 0 0 0
+	rcu-torture: Free-Block Circulation:  155440 155440 155440 155440 155440 155440 155440 155440 155440 155440 0
+	rcu-torture:--- End of test: SUCCESS: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
+
+Sulla maggior parte dei sistemi questo rapporto si produce col comando "dmesg |
+grep torture:". Su configurazioni più esoteriche potrebbe essere necessario
+usare altri comandi per visualizzare i messaggi di printk(). La funzione
+printk() usa KERN_ALERT, dunque i messaggi dovrebbero essere ben visibili. ;-)
+
+La prima e l'ultima riga mostrano i parametri di module di rcutorture, e solo
+sull'ultima riga abbiamo il risultato finale delle verifiche effettuate che può
+essere "SUCCESS" (successo) or "FAILURE" (insuccesso).
+
+Le voci sono le seguenti:
+
+* "rtc": L'indirizzo in esadecimale della struttura attualmente visibile dai
+   lettori.
+
+* "ver": Il numero di volte dall'avvio che il processo scrittore di RCU ha
+  cambiato la struttura visible ai lettori.
+
+* "tfle": se non è zero, indica la lista di strutture "torture freelist" da
+  mettere in "rtc" è vuota. Questa condizione è importante perché potrebbe
+  illuderti che RCU stia funzionando mentre invece non è il caso. :-/
+
+* "rta": numero di strutture allocate dalla lista "torture freelist".
+
+* "rtaf": il numero di allocazioni fallite dalla lista "torture freelist" a
+  causa del fatto che fosse vuota. Non è inusuale che sia diverso da zero, ma è
+  un brutto segno se questo numero rappresenta una frazione troppo alta di
+  "rta".
+
+* "rtf": il numero di rilasci nella lista "torture freelist"
+
+* "rtmbe": Un valore diverso da zero indica che rcutorture crede che
+  rcu_assign_pointer() e rcu_dereference() non funzionino correttamente. Il
+  valore dovrebbe essere zero.
+
+* "rtbe": un valore diverso da zero indica che le funzioni della famiglia
+  rcu_barrier() non funzionano correttamente.
+
+* "rtbke": rcutorture è stato capace di creare dei kthread real-time per forzare
+  l'inversione di priorità di RCU. Il valore dovrebbe essere zero.
+
+* "rtbre": sebbene rcutorture sia riuscito a creare dei kthread capaci di
+  forzare l'inversione di priorità, non è riuscito però ad impostarne la
+  priorità real-time al livello 1. Il valore dovrebbe essere zero.
+
+* "rtbf": Il numero di volte che è fallita la promozione della priorità per
+  risolvere un'inversione.
+
+* "rtb": Il numero di volte che rcutorture ha provato a forzare l'inversione di
+  priorità. Il valore dovrebbe essere diverso da zero Se state verificando la
+  promozione della priorità col parametro "test_bootst".
+
+* "nt": il numero di volte che rcutorture ha eseguito codice lato lettura
+  all'interno di un gestore di *timer*. Questo valore dovrebbe essere diverso da
+  zero se avete specificato il parametro "irqreader".
+
+* "Reader Pipe": un istogramma dell'età delle strutture viste dai lettori. RCU
+  non funziona correttamente se una qualunque voce, dalla terza in poi, ha un
+  valore diverso da zero. Se dovesse succedere, rcutorture stampa la stringa
+  "!!!" per renderlo ben visibile. L'età di una struttura appena creata è zero,
+  diventerà uno quando sparisce dalla visibilità di un lettore, e incrementata
+  successivamente per ogni periodo di grazia; infine rilasciata dopo essere
+  passata per (RCU_TORTURE_PIPE_LEN-2) periodi di grazia.
+
+  L'istantanea qui sopra è stata presa da una corretta implementazione di RCU.
+  Se volete vedere come appare quando non funziona, sbizzarritevi nel romperla.
+  ;-)
+
+* "Reader Batch": un istogramma di età di strutture viste dai lettori, ma
+  conteggiata in termini di lotti piuttosto che periodi. Anche qui dalla terza
+  voce in poi devono essere zero. La ragione d'esistere di questo rapporto è che
+  a volte è più facile scatenare un terzo valore diverso da zero qui piuttosto
+  che nella lista "Reader Pipe".
+
+* "Free-Block Circulation": il numero di strutture *torture* che hanno raggiunto
+  un certo punto nella catena. Il primo numero dovrebbe corrispondere
+  strettamente al numero di strutture allocate; il secondo conta quelle rimosse
+  dalla vista dei lettori. Ad eccezione dell'ultimo valore, gli altri
+  corrispondono al numero di passaggi attraverso il periodo di grazia. L'ultimo
+  valore dovrebbe essere zero, perché viene incrementato solo se il contatore
+  della struttura torture viene in un qualche modo incrementato oltre il
+  normale.
+
+Una diversa implementazione di RCU potrebbe fornire informazioni aggiuntive. Per
+esempio, *Tree SRCU* fornisce anche la seguente riga::
+
+	srcud-torture: Tree SRCU per-CPU(idx=0): 0(35,-21) 1(-4,24) 2(1,1) 3(-26,20) 4(28,-47) 5(-9,4) 6(-10,14) 7(-14,11) T(1,6)
+
+Questa riga mostra lo stato dei contatori per processore, in questo caso per
+*Tree SRCU*, usando un'allocazione dinamica di srcu_struct (dunque "srcud-"
+piuttosto che "srcu-"). I numeri fra parentesi sono i valori del "vecchio"
+contatore e di quello "corrente" per ogni processore. Il valore "idx" mappa
+questi due valori nell'array, ed è utile per il *debug*. La "T" finale contiene
+il valore totale dei contatori.
+
+Uso su specifici kernel
+=======================
+
+A volte può essere utile eseguire RCU torture su un kernel già compilato, ad
+esempio quando lo si sta per mettere in proeduzione. In questo caso, il kernel
+dev'essere compilato con CONFIG_RCU_TORTURE_TEST=m, cosicché le verifiche possano
+essere avviate usano modprobe e terminate con rmmod.
+
+Per esempio, potreste usare questo script::
+
+	#!/bin/sh
+
+	modprobe rcutorture
+	sleep 3600
+	rmmod rcutorture
+	dmesg | grep torture:
+
+Potete controllare il rapporto verificando manualmente la presenza del marcatore
+di errore "!!!". Ovviamente, siete liberi di scriverne uno più elaborato che
+identifichi automaticamente gli errori. Il comando "rmmod" forza la stampa di
+"SUCCESS" (successo), "FAILURE" (fallimento), o "RCU_HOTPLUG". I primi due sono
+autoesplicativi; invece, l'ultimo indica che non son stati trovati problemi in
+RCU, tuttavia ci sono stati problemi con CPU-hotplug.
+
+
+Uso sul kernel di riferimento
+=============================
+
+Quando si usa rcutorture per verificare modifiche ad RCU stesso, spesso è
+necessario compilare un certo numero di kernel usando configurazioni diverse e
+con parametri d'avvio diversi. In questi casi, usare modprobe ed rmmod potrebbe
+richiedere molto tempo ed il processo essere suscettibile ad errori.
+
+Dunque, viene messo a disposizione il programma
+tools/testing/selftests/rcutorture/bin/kvm.sh per le architetture x86, arm64 e
+powerpc. Di base, eseguirà la serie di verifiche elencate in
+tools/testing/selftests/rcutorture/configs/rcu/CFLIST. Ognuna di queste verrà
+eseguita per 30 minuti in una macchina virtuale con uno spazio utente minimale
+fornito da un initrd generato automaticamente. Al completamento, gli artefatti
+prodotti e i messaggi vengono analizzati alla ricerca di errori, ed i risultati
+delle esecuzioni riassunti in un rapporto.
+
+Su grandi sistemi, le verifiche di rcutorture posso essere velocizzare passano a
+kvm.sh l'argomento --cpus. Per esempio, su un sistema a 64 processori, "--cpus
+43" userà fino a 43 processori per eseguire contemporaneamente le verifiche. Su
+un kernel v5.4 per eseguire tutti gli scenari in due serie, riduce il tempo
+d'esecuzione da otto ore a un'ora (senza contare il tempo per compilare sedici
+kernel). L'argomento "--dryrun sched" non eseguirà verifiche, piuttosto vi
+informerà su come queste verranno organizzate in serie. Questo può essere utile
+per capire quanti processori riservare per le verifiche in --cpus.
+
+Non serve eseguire tutti gli scenari di verifica per ogni modifica. Per esempio,
+per una modifica a Tree SRCU potete eseguire gli scenari SRCU-N e SRCU-P. Per
+farlo usate l'argomento --configs di kvm.sh in questo modo: "--configs 'SRCU-N
+SRCU-P'". Su grandi sistemi si possono eseguire più copie degli stessi scenari,
+per esempio, un hardware che permette di eseguire 448 thread, può eseguire 5
+istanze complete contemporaneamente. Per farlo::
+
+	kvm.sh --cpus 448 --configs '5*CFLIST'
+
+Oppure, lo stesso sistema, può eseguire contemporaneamente 56 istanze dello
+scenario su otto processori::
+
+	kvm.sh --cpus 448 --configs '56*TREE04'
+
+O ancora 28 istanze per ogni scenario su otto processori::
+
+	kvm.sh --cpus 448 --configs '28*TREE03 28*TREE04'
+
+Ovviamente, ogni esecuzione utilizzerà della memoria. Potete limitarne l'uso con
+l'argomento --memory, che di base assume il valore 512M. Per poter usare valori
+piccoli dovrete disabilitare le verifiche *callback-flooding* usando il
+parametro --bootargs che vedremo in seguito.
+
+A volte è utile avere informazioni aggiuntive di debug, in questo caso potete
+usare il parametro --kconfig, per esempio, ``--kconfig
+'CONFIG_RCU_EQS_DEBUG=y'``. In aggiunta, ci sono i parametri --gdb, --kasan, and
+kcsan. Da notare che --gdb vi limiterà all'uso di un solo scenario per
+esecuzione di kvm.sh e richiede di avere anche un'altra finestra aperta dalla
+quale eseguire ``gdb`` come viene spiegato dal programma.
+
+Potete passare anche i parametri d'avvio del kernel, per esempio, per
+controllare i parametri del modulo rcutorture. Per esempio, per verificare
+modifiche del codice RCU CPU stall-warning, usate ``bootargs
+'rcutorture.stall_cpu=30``. Il programma riporterà un fallimento, ossia il
+risultato della verifica. Come visto in precedenza, ridurre la memoria richiede
+la disabilitazione delle verifiche *callback-flooding*::
+
+	kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
+		--bootargs 'rcutorture.fwd_progress=0'
+
+A volte tutto quello che serve è una serie completa di compilazioni del kernel.
+Questo si ottiene col parametro --buildonly.
+
+Il parametro --duration sovrascrive quello di base di 30 minuti. Per esempio,
+con ``--duration 2d`` l'esecuzione sarà di due giorni, ``--duraction 5min`` di
+cinque minuti, e ``--duration 45s`` di 45 secondi. L'ultimo può essere utile per
+scovare rari errori nella sequenza d'avvio.
+
+Infine, il parametro --trust-make permette ad ogni nuova compilazione del kernel
+di riutilizzare tutto il possibile da quelle precedenti. Da notare che senza il
+parametro --trust-make, i vostri file di *tag* potrebbero essere distrutti.
+
+Ci sono altri parametri più misteriosi che sono documentati nel codice sorgente
+dello programma kvm.sh.
+
+Se un'esecuzione contiene degli errori, il loro numero durante la compilazione e
+all'esecuzione verranno elencati alla fine fra i risultati di kvm.sh (che vi
+consigliamo caldamente di reindirizzare verso un file). I file prodotti dalla
+compilazione ed i risultati stampati vengono salvati, usando un riferimento
+temporale, nelle cartella tools/testing/selftests/rcutorture/res. Una cartella
+di queste cartelle può essere fornita a kvm-find-errors.sh per estrarne gli
+errori. Per esempio::
+
+	tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh \
+		tools/testing/selftests/rcutorture/res/2020.01.20-15.54.23
+
+Tuttavia, molto spesso è più conveniente aprire i file direttamente. I file
+riguardanti tutti gli scenari di un'esecuzione di trovano nella cartella
+principale (2020.01.20-15.54.23 nell'esempio precedente), mentre quelli
+specifici per scenario si trovano in sotto cartelle che prendono il nome dello
+scenario stesso (per esempio, "TREE04"). Se un dato scenario viene eseguito più
+di una volta (come abbiamo visto con "--configs '56*TREE04'"), allora dalla
+seconda esecuzione in poi le sottocartelle includeranno un numero di
+progressione, per esempio "TREE04.2", "TREE04.3", e via dicendo.
+
+Il file solitamente più usato nella cartella principale è testid.txt. Se la
+verifica viene eseguita in un repositorio git, allora questo file conterrà il
+*commit* sul quale si basano le verifiche, mentre tutte le modifiche non
+registrare verranno mostrate in formato diff.
+
+I file solitamente più usati nelle cartelle di scenario sono:
+
+.config
+  Questo file contiene le opzioni di Kconfig
+
+Make.out
+  Questo file contiene il risultato di compilazione per uno specifico scenario
+
+console.log
+  Questo file contiene il risultato d'esecuzione per uno specifico scenario.
+  Questo file può essere esaminato una volta che il kernel è stato avviato,
+  ma potrebbe non esistere se l'avvia non è fallito.
+
+vmlinux
+  Questo file contiene il kernel, e potrebbe essere utile da esaminare con
+  programmi come pbjdump e gdb
+
+Ci sono altri file, ma vengono usati meno. Molti sono utili all'analisi di
+rcutorture stesso o dei suoi programmi.
+
+Nel kernel v5.4, su un sistema a 12 processori, un'esecuzione senza errori
+usando gli scenari di base produce il seguente risultato::
+
+    SRCU-N ------- 804233 GPs (148.932/s) [srcu: g10008272 f0x0 ]
+    SRCU-P ------- 202320 GPs (37.4667/s) [srcud: g1809476 f0x0 ]
+    SRCU-t ------- 1122086 GPs (207.794/s) [srcu: g0 f0x0 ]
+    SRCU-u ------- 1111285 GPs (205.794/s) [srcud: g1 f0x0 ]
+    TASKS01 ------- 19666 GPs (3.64185/s) [tasks: g0 f0x0 ]
+    TASKS02 ------- 20541 GPs (3.80389/s) [tasks: g0 f0x0 ]
+    TASKS03 ------- 19416 GPs (3.59556/s) [tasks: g0 f0x0 ]
+    TINY01 ------- 836134 GPs (154.84/s) [rcu: g0 f0x0 ] n_max_cbs: 34198
+    TINY02 ------- 850371 GPs (157.476/s) [rcu: g0 f0x0 ] n_max_cbs: 2631
+    TREE01 ------- 162625 GPs (30.1157/s) [rcu: g1124169 f0x0 ]
+    TREE02 ------- 333003 GPs (61.6672/s) [rcu: g2647753 f0x0 ] n_max_cbs: 35844
+    TREE03 ------- 306623 GPs (56.782/s) [rcu: g2975325 f0x0 ] n_max_cbs: 1496497
+    CPU count limited from 16 to 12
+    TREE04 ------- 246149 GPs (45.5831/s) [rcu: g1695737 f0x0 ] n_max_cbs: 434961
+    TREE05 ------- 314603 GPs (58.2598/s) [rcu: g2257741 f0x2 ] n_max_cbs: 193997
+    TREE07 ------- 167347 GPs (30.9902/s) [rcu: g1079021 f0x0 ] n_max_cbs: 478732
+    CPU count limited from 16 to 12
+    TREE09 ------- 752238 GPs (139.303/s) [rcu: g13075057 f0x0 ] n_max_cbs: 99011
+
+Ripetizioni
+===========
+
+Immaginate di essere alla caccia di un raro problema che si verifica all'avvio.
+Potreste usare kvm.sh, tuttavia questo ricompilerebbe il kernel ad ogni
+esecuzione. Se avete bisogno di (diciamo) 1000 esecuzioni per essere sicuri di
+aver risolto il problema, allora queste inutili ricompilazioni possono diventare
+estremamente fastidiose.
+
+Per questo motivo esiste kvm-again.sh.
+
+Immaginate che un'esecuzione precedente di kvm.sh abbia lasciato i suoi
+artefatti nella cartella::
+
+	tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
+
+Questa esecuzione può essere rieseguita senza ricompilazioni::
+
+	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
+
+Alcuni dei parametri originali di kvm.sh possono essere sovrascritti, in
+particolare --duration e --bootargs. Per esempio::
+
+	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28 \
+		--duration 45s
+
+rieseguirebbe il test precedente, ma solo per 45 secondi, e quindi aiutando a
+trovare quel raro problema all'avvio sopracitato.
+
+Esecuzioni distribuite
+======================
+
+Sebbene kvm.sh sia utile, le sue verifiche sono limitate ad un singolo sistema.
+Non è poi così difficile usare un qualsiasi ambiente di sviluppo per eseguire
+(diciamo) 5 istanze di kvm.sh su altrettanti sistemi, ma questo avvierebbe
+inutili ricompilazioni del kernel. In aggiunta, il processo di distribuzione
+degli scenari di verifica per rcutorture sui sistemi disponibili richiede
+scrupolo perché soggetto ad errori.
+
+Per questo esiste kvm-remote.sh.
+
+Se il seguente comando funziona::
+
+	ssh system0 date
+
+e funziona anche per system1, system2, system3, system4, e system5, e tutti
+questi sistemi hanno 64 CPU, allora potere eseguire::
+
+	kvm-remote.sh "system0 system1 system2 system3 system4 system5" \
+		--cpus 64 --duration 8h --configs "5*CFLIST"
+
+Questo compilerà lo scenario di base sul sistema locale, poi lo distribuirà agli
+altri cinque sistemi elencati fra i parametri, ed eseguirà ogni scenario per
+otto ore. Alla fine delle esecuzioni, i risultati verranno raccolti, registrati,
+e stampati. La maggior parte dei parametri di kvm.sh possono essere usati con
+kvm-remote.sh, tuttavia la lista dei sistemi deve venire sempre per prima.
+
+L'argomento di kvm.sh ``--dryrun scenarios`` può essere utile per scoprire
+quanti scenari potrebbero essere eseguiti in gruppo di sistemi.
+
+Potete rieseguire anche una precedente esecuzione remota come abbiamo già fatto
+per kvm.sh::
+
+	kvm-remote.sh "system0 system1 system2 system3 system4 system5" \
+		tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28-remote \
+		--duration 24h
+
+In questo caso, la maggior parte dei parametri di kvm-again.sh possono essere
+usati dopo il percorso alla cartella contenente gli artefatti dell'esecuzione da
+ripetere.
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/core-api/index.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/core-api/index.rst
index cc4c4328ad03..dad20402d11b 100644
--- linux-libre-6.8-gnu/Documentation/translations/it_IT/core-api/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/core-api/index.rst
@@ -10,6 +10,18 @@ Utilità di base
 
    symbol-namespaces
 
+Primitive di sincronizzazione
+=============================
+
+Come Linux impedisce che tutto si verifichi contemporaneamente. Consultate
+Documentation/translations/it_IT/locking/index.rst per maggiorni informazioni
+sul tema.
+
+.. toctree::
+   :maxdepth: 1
+
+   ../RCU/index
+
 .. only:: subproject and html
 
    Indices
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/i2c/i2c-protocol.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/i2c/i2c-protocol.rst
new file mode 100644
index 000000000000..ba7c8cd8f560
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/i2c/i2c-protocol.rst
@@ -0,0 +1,99 @@
+=================
+Il protocollo I2C
+=================
+
+Questo documento è una panoramica delle transazioni di base I2C e delle API
+del kernel per eseguirli.
+
+Spiegazione dei simboli
+=======================
+
+=============== ===========================================================
+S               Condizione di avvio
+P               Condizione di stop
+Rd/Wr (1 bit)   Bit di lettura/scrittura. Rd vale 1, Wr vale 0.
+A, NA (1 bit)   Bit di riconoscimento (ACK) e di non riconoscimento (NACK).
+Addr  (7 bit)   Indirizzo I2C a 7 bit. Nota che questo può essere espanso
+                per ottenere un indirizzo I2C a 10 bit.
+Dati  (8 bit)   Un byte di dati.
+
+[..]            Fra parentesi quadre i dati inviati da dispositivi I2C,
+                anziché dal master.
+=============== ===========================================================
+
+
+Transazione semplice di invio
+=============================
+
+Implementato da i2c_master_send()::
+
+  S Addr Wr [A] Dati [A] Dati [A] ... [A] Dati [A] P
+
+
+Transazione semplice di ricezione
+=================================
+
+Implementato da i2c_master_recv()::
+
+  S Addr Rd [A] [Dati] A [Dati] A ... A [Dati] NA P
+
+
+Transazioni combinate
+=====================
+
+Implementato da i2c_transfer().
+
+Sono come le transazioni di cui sopra, ma invece di uno condizione di stop P
+viene inviata una condizione di inizio S e la transazione continua.
+Un esempio di lettura di un byte, seguita da una scrittura di un byte::
+
+  S Addr Rd [A] [Dati] NA S Addr Wr [A] Dati [A] P
+
+
+Transazioni modificate
+======================
+
+Le seguenti modifiche al protocollo I2C possono essere generate
+impostando questi flag per i messaggi I2C. Ad eccezione di I2C_M_NOSTART, sono
+di solito necessari solo per risolvere problemi di un dispositivo:
+
+I2C_M_IGNORE_NAK:
+    Normalmente il messaggio viene interrotto immediatamente se il dispositivo
+    risponde con [NA]. Impostando questo flag, si considera qualsiasi [NA] come
+    [A] e tutto il messaggio viene inviato.
+    Questi messaggi potrebbero comunque non riuscire a raggiungere il timeout
+    SCL basso->alto.
+
+I2C_M_NO_RD_ACK:
+    In un messaggio di lettura, il bit A/NA del master viene saltato.
+
+I2C_M_NOSTART:
+    In una transazione combinata, potrebbe non essere generato alcun
+    "S Addr Wr/Rd [A]".
+    Ad esempio, impostando I2C_M_NOSTART sul secondo messaggio parziale
+    genera qualcosa del tipo::
+
+      S Addr Rd [A] [Dati] NA Dati [A] P
+
+    Se si imposta il flag I2C_M_NOSTART per il primo messaggio parziale,
+    non viene generato Addr, ma si genera la condizione di avvio S.
+    Questo probabilmente confonderà tutti gli altri dispositivi sul bus, quindi
+    meglio non usarlo.
+
+    Questo viene spesso utilizzato per raccogliere le trasmissioni da più
+    buffer di dati presenti nella memoria di sistema in qualcosa che appare
+    come un singolo trasferimento verso il dispositivo I2C. Inoltre, alcuni
+    dispositivi particolari lo utilizzano anche tra i cambi di direzione.
+
+I2C_M_REV_DIR_ADDR:
+    Questo inverte il flag Rd/Wr. Cioè, se si vuole scrivere, ma si ha bisogno
+    di emettere una Rd invece di una Wr, o viceversa, si può impostare questo
+    flag.
+    Per esempio::
+
+      S Addr Rd [A] Dati [A] Dati [A] ... [A] Dati [A] P
+
+I2C_M_STOP:
+    Forza una condizione di stop (P) dopo il messaggio. Alcuni protocolli
+    simili a I2C come SCCB lo richiedono. Normalmente, non si vuole essere
+    interrotti tra i messaggi di un trasferimento.
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/i2c/index.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/i2c/index.rst
new file mode 100644
index 000000000000..14fbe3d78299
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/i2c/index.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+Il sottosistema I2C/SMBus
+=========================
+
+Introduzione
+============
+
+.. toctree::
+   :maxdepth: 1
+
+   summary
+   i2c-protocol
+
+Scrivere un device driver
+=========================
+
+.. toctree::
+   :maxdepth: 1
+
+Debugging
+=========
+
+.. toctree::
+   :maxdepth: 1
+
+Slave I2C
+=========
+
+.. toctree::
+   :maxdepth: 1
+
+
+Argomenti avanzati
+==================
+
+.. toctree::
+   :maxdepth: 1
+
+.. only::  subproject and html
+
+   Indici
+   ======
+
+   * :ref:`genindex`
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/i2c/summary.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/i2c/summary.rst
new file mode 100644
index 000000000000..1535e13a32e2
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/i2c/summary.rst
@@ -0,0 +1,64 @@
+==========================
+Introduzione a I2C e SMBus
+==========================
+
+I²C (letteralmente "I al quadrato C" e scritto I2C nella documentazione del
+kernel) è un protocollo sviluppato da Philips. É un protocollo lento a 2 fili
+(a velocità variabile, al massimo 400KHz), con un'estensione per le velocità
+elevate (3.4 MHz). Questo protocollo offre un bus a basso costo per collegare
+dispositivi di vario genere a cui si accede sporadicamente e utilizzando
+poca banda. Alcuni sistemi usano varianti che non rispettano i requisiti
+originali, per cui non sono indicati come I2C, ma hanno nomi diversi, per
+esempio TWI (Interfaccia a due fili), IIC.
+
+L'ultima specifica ufficiale I2C è la `"Specifica I2C-bus e manuale utente"
+(UM10204) <https://www.nxp.com/webapp/Download?colCode=UM10204>`_
+pubblicata da NXP Semiconductors. Tuttavia, è necessario effettuare il login
+al sito per accedere al PDF. Una versione precedente della specifica
+(revisione 6) è archiviata
+`qui <https://web.archive.org/web/20210813122132/
+https://www.nxp.com/docs/en/user-guide/UM10204.pdf>`_.
+
+SMBus (Bus per la gestione del sistema) si basa sul protocollo I2C ed è
+principalmente un sottoinsieme di protocolli e segnali I2C. Molti dispositivi
+I2C funzioneranno su SMBus, ma alcuni protocolli SMBus aggiungono semantica
+oltre quanto richiesto da I2C. Le moderne schede madri dei PC si affidano a
+SMBus. I più comuni dispositivi collegati tramite SMBus sono moduli RAM
+configurati utilizzando EEPROM I2C, e circuiti integrati di monitoraggio
+hardware.
+
+Poiché SMBus è principalmente un sottoinsieme del bus I2C,
+possiamo farne uso su molti sistemi I2C. Ci sono però sistemi che non
+soddisfano i vincoli elettrici sia di SMBus che di I2C; e altri che non possono
+implementare tutta la semantica o messaggi comuni del protocollo SMBus.
+
+
+Terminologia
+============
+
+Utilizzando la terminologia della documentazione ufficiale, il bus I2C connette
+uno o più circuiti integrati *master* e uno o più circuiti integrati *slave*.
+
+.. kernel-figure::  ../../../i2c/i2c_bus.svg
+   :alt:    Un semplice bus I2C con un master e 3 slave
+
+   Un semplice Bus I2C
+
+Un circuito integrato  **master** è un nodo che inizia le comunicazioni con gli
+slave. Nell'implementazione del kernel Linux è chiamato **adattatore** o bus. I
+driver degli adattatori si trovano nella sottocartella ``drivers/i2c/busses/``.
+
+Un **algoritmo** contiene codice generico che può essere utilizzato per
+implementare una intera classe di adattatori I2C. Ciascun driver dell'
+adattatore specifico dipende da un driver dell'algoritmo nella sottocartella
+``drivers/i2c/algos/`` o include la propria implementazione.
+
+Un circuito integrato **slave** è un nodo che risponde alle comunicazioni
+quando indirizzato dal master. In Linux è chiamato **client** (dispositivo). I
+driver dei dispositivi sono contenuti in una cartella specifica per la
+funzionalità che forniscono, ad esempio ``drivers/media/gpio/`` per espansori
+GPIO e ``drivers/media/i2c/`` per circuiti integrati relativi ai video.
+
+Per la configurazione di esempio in figura, avrai bisogno di un driver per il
+tuo adattatore I2C e driver per i tuoi dispositivi I2C (solitamente un driver
+per ciascuno dispositivo).
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/index.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/index.rst
index b95dfa1ded04..70ccd23b2cde 100644
--- linux-libre-6.8-gnu/Documentation/translations/it_IT/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/index.rst
@@ -91,6 +91,8 @@ interfacciarsi con il resto del kernel.
    :maxdepth: 1
 
    core-api/index
+   Sincronizzazione nel kernel <locking/index>
+   subsystem-apis
 
 Strumenti e processi per lo sviluppo
 ====================================
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/locking/index.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/index.rst
new file mode 100644
index 000000000000..19963d33e84d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/index.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Sincronizzazione
+================
+
+.. toctree::
+    :maxdepth: 1
+
+    locktypes
+    lockdep-design
+    lockstat
+    locktorture
+
+.. only::  subproject and html
+
+   Indici
+   ======
+
+   * :ref:`genindex`
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/locking/lockdep-design.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/lockdep-design.rst
new file mode 100644
index 000000000000..9ed00d8cf280
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/lockdep-design.rst
@@ -0,0 +1,678 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-ita.rst
+
+Validatore di sincronizzazione durante l'esecuzione
+===================================================
+
+Classi di blocchi
+-----------------
+
+L'oggetto su cui il validatore lavora è una "classe" di blocchi.
+
+Una classe di blocchi è un gruppo di blocchi che seguono le stesse regole di
+sincronizzazione, anche quando i blocchi potrebbero avere più istanze (anche
+decine di migliaia). Per esempio un blocco nella struttura inode è una classe,
+mentre ogni inode sarà un'istanza di questa classe di blocco.
+
+Il validatore traccia lo "stato d'uso" di una classe di blocchi e le sue
+dipendenze con altre classi. L'uso di un blocco indica come quel blocco viene
+usato rispetto al suo contesto d'interruzione, mentre le dipendenze di un blocco
+possono essere interpretate come il loro ordine; per esempio L1 -> L2 suggerisce
+che un processo cerca di acquisire L2 mentre già trattiene L1. Dal punto di
+vista di lockdep, i due blocchi (L1 ed L2) non sono per forza correlati: quella
+dipendenza indica solamente l'ordine in cui sono successe le cose. Il validatore
+verifica permanentemente la correttezza dell'uso dei blocchi e delle loro
+dipendenze, altrimenti ritornerà un errore.
+
+Il comportamento di una classe di blocchi viene costruito dall'insieme delle sue
+istanze. Una classe di blocco viene registrata alla creazione della sua prima
+istanza, mentre tutte le successive istanze verranno mappate; dunque, il loro
+uso e le loro dipendenze contribuiranno a costruire quello della classe. Una
+classe di blocco non sparisce quando sparisce una sua istanza, ma può essere
+rimossa quando il suo spazio in memoria viene reclamato. Per esempio, questo
+succede quando si rimuove un modulo, o quando una *workqueue* viene eliminata.
+
+Stato
+-----
+
+Il validatore traccia l'uso cronologico delle classi di blocchi e ne divide
+l'uso in categorie (4 USI * n STATI + 1).
+
+I quattro USI possono essere:
+
+- 'sempre trattenuto nel contesto <STATO>'
+- 'sempre trattenuto come blocco di lettura nel contesto <STATO>'
+- 'sempre trattenuto con <STATO> abilitato'
+- 'sempre trattenuto come blocco di lettura con <STATO> abilitato'
+
+gli `n` STATI sono codificati in kernel/locking/lockdep_states.h, ad oggi
+includono:
+
+- hardirq
+- softirq
+
+infine l'ultima categoria è:
+
+- 'sempre trattenuto'                                  [ == !unused        ]
+
+Quando vengono violate le regole di sincronizzazione, questi bit di utilizzo
+vengono presentati nei messaggi di errore di sincronizzazione, fra parentesi
+graffe, per un totale di `2 * n` (`n`: bit STATO). Un esempio inventato::
+
+   modprobe/2287 is trying to acquire lock:
+    (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
+
+   but task is already holding lock:
+    (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
+
+Per un dato blocco, da sinistra verso destra, la posizione del bit indica l'uso
+del blocco e di un eventuale blocco di lettura, per ognuno degli `n` STATI elencati
+precedentemente. Il carattere mostrato per ogni bit indica:
+
+   ===  ===========================================================================
+   '.'  acquisito con interruzioni disabilitate fuori da un contesto d'interruzione
+   '-'  acquisito in contesto d'interruzione
+   '+'  acquisito con interruzioni abilitate
+   '?'  acquisito in contesto d'interruzione con interruzioni abilitate
+   ===  ===========================================================================
+
+Il seguente esempio mostra i bit::
+
+    (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
+                         ||||
+                         ||| \-> softirq disabilitati e fuori da un contesto di softirq
+                         || \--> acquisito in un contesto di softirq
+                         | \---> hardirq disabilitati e fuori da un contesto di hardirq
+                          \----> acquisito in un contesto di hardirq
+
+Per un dato STATO, che il blocco sia mai stato acquisito in quel contesto di
+STATO, o che lo STATO sia abilitato, ci lascia coi quattro possibili scenari
+mostrati nella seguente tabella. Il carattere associato al bit indica con
+esattezza in quale scenario ci si trova al momento del rapporto.
+
+  +---------------+---------------+------------------+
+  |               | irq abilitati | irq disabilitati |
+  +---------------+---------------+------------------+
+  | sempre in irq |      '?'      |       '-'        |
+  +---------------+---------------+------------------+
+  | mai in irq    |      '+'      |       '.'        |
+  +---------------+---------------+------------------+
+
+Il carattere '-' suggerisce che le interruzioni sono disabilitate perché
+altrimenti verrebbe mostrato il carattere '?'. Una deduzione simile può essere
+fatta anche per '+'
+
+I blocchi inutilizzati (ad esempio i mutex) non possono essere fra le cause di
+un errore.
+
+Regole dello stato per un blocco singolo
+----------------------------------------
+
+Avere un blocco sicuro in interruzioni (*irq-safe*) significa che è sempre stato
+usato in un contesto d'interruzione, mentre un blocco insicuro in interruzioni
+(*irq-unsafe*) significa che è sempre stato acquisito con le interruzioni
+abilitate.
+
+Una classe softirq insicura è automaticamente insicura anche per hardirq. I
+seguenti stati sono mutualmente esclusivi: solo una può essere vero quando viene
+usata una classe di blocco::
+
+ <hardirq-safe> o <hardirq-unsafe>
+ <softirq-safe> o <softirq-unsafe>
+
+Questo perché se un blocco può essere usato in un contesto di interruzioni
+(sicuro in interruzioni), allora non può mai essere acquisito con le
+interruzioni abilitate (insicuro in interruzioni). Altrimenti potrebbe
+verificarsi uno stallo. Per esempio, questo blocco viene acquisito, ma prima di
+essere rilasciato il contesto d'esecuzione viene interrotto nuovamente, e quindi
+si tenterà di acquisirlo nuovamente. Questo porterà ad uno stallo, in
+particolare uno stallo ricorsivo.
+
+Il validatore rileva e riporta gli usi di blocchi che violano queste regole per
+blocchi singoli.
+
+Regole per le dipendenze di blocchi multipli
+--------------------------------------------
+
+La stessa classe di blocco non deve essere acquisita due volte, questo perché
+potrebbe portare ad uno blocco ricorsivo e dunque ad uno stallo.
+
+Inoltre, due blocchi non possono essere trattenuti in ordine inverso::
+
+ <L1> -> <L2>
+ <L2> -> <L1>
+
+perché porterebbe ad uno stallo - chiamato stallo da blocco inverso - in cui si
+cerca di trattenere i due blocchi in un ciclo in cui entrambe i contesti
+aspettano per sempre che l'altro termini. Il validatore è in grado di trovare
+queste dipendenze cicliche di qualsiasi complessità, ovvero nel mezzo ci
+potrebbero essere altre sequenze di blocchi. Il validatore troverà se questi
+blocchi possono essere acquisiti circolarmente.
+
+In aggiunta, le seguenti sequenze di blocco nei contesti indicati non sono
+permesse, indipendentemente da quale che sia la classe di blocco::
+
+   <hardirq-safe>   ->  <hardirq-unsafe>
+   <softirq-safe>   ->  <softirq-unsafe>
+
+La prima regola deriva dal fatto che un blocco sicuro in interruzioni può essere
+trattenuto in un contesto d'interruzione che, per definizione, ha la possibilità
+di interrompere un blocco insicuro in interruzioni; questo porterebbe ad uno
+stallo da blocco inverso. La seconda, analogamente, ci dice che un blocco sicuro
+in interruzioni software potrebbe essere trattenuto in un contesto di
+interruzione software, dunque potrebbe interrompere un blocco insicuro in
+interruzioni software.
+
+Le suddette regole vengono applicate per qualsiasi sequenza di blocchi: quando
+si acquisiscono nuovi blocchi, il validatore verifica se vi è una violazione
+delle regole fra il nuovo blocco e quelli già trattenuti.
+
+Quando una classe di blocco cambia stato, applicheremo le seguenti regole:
+
+- se viene trovato un nuovo blocco sicuro in interruzioni, verificheremo se
+  abbia mai trattenuto dei blocchi insicuri in interruzioni.
+
+- se viene trovato un nuovo blocco sicuro in interruzioni software,
+  verificheremo se abbia trattenuto dei blocchi insicuri in interruzioni
+  software.
+
+- se viene trovato un nuovo blocco insicuro in interruzioni, verificheremo se
+  abbia trattenuto dei blocchi sicuri in interruzioni.
+
+- se viene trovato un nuovo blocco insicuro in interruzioni software,
+  verificheremo se abbia trattenuto dei blocchi sicuri in interruzioni
+  software.
+
+(Di nuovo, questi controlli vengono fatti perché un contesto d'interruzione
+potrebbe interrompere l'esecuzione di qualsiasi blocco insicuro portando ad uno
+stallo; questo anche se lo stallo non si verifica in pratica)
+
+Eccezione: dipendenze annidate sui dati portano a blocchi annidati
+------------------------------------------------------------------
+
+Ci sono alcuni casi in cui il kernel Linux acquisisce più volte la stessa
+istanza di una classe di blocco. Solitamente, questo succede quando esiste una
+gerarchia fra oggetti dello stesso tipo. In questi casi viene ereditato
+implicitamente l'ordine fra i due oggetti (definito dalle proprietà di questa
+gerarchia), ed il kernel tratterrà i blocchi in questo ordine prefissato per
+ognuno degli oggetti.
+
+Un esempio di questa gerarchia di oggetti che producono "blocchi annidati" sono
+i *block-dev* che rappresentano l'intero disco e quelli che rappresentano una
+sua partizione; la partizione è una parte del disco intero, e l'ordine dei
+blocchi sarà corretto fintantoche uno acquisisce il blocco del disco intero e
+poi quello della partizione. Il validatore non rileva automaticamente questo
+ordine implicito, perché queste regole di sincronizzazione non sono statiche.
+
+Per istruire il validatore riguardo a questo uso corretto dei blocchi sono stati
+introdotte nuove primitive per specificare i "livelli di annidamento". Per
+esempio, per i blocchi a mutua esclusione dei *block-dev* si avrebbe una
+chiamata simile a::
+
+  enum bdev_bd_mutex_lock_class
+  {
+       BD_MUTEX_NORMAL,
+       BD_MUTEX_WHOLE,
+       BD_MUTEX_PARTITION
+  };
+
+  mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
+
+In questo caso la sincronizzazione viene fatta su un *block-dev* sapendo che si
+tratta di una partizione.
+
+Ai fini della validazione, il validatore lo considererà con una - sotto - classe
+di blocco separata.
+
+Nota: Prestate estrema attenzione che la vostra gerarchia sia corretta quando si
+vogliono usare le primitive _nested(); altrimenti potreste avere sia falsi
+positivi che falsi negativi.
+
+Annotazioni
+-----------
+
+Si possono utilizzare due costrutti per verificare ed annotare se certi blocchi
+devono essere trattenuti: lockdep_assert_held*(&lock) e
+lockdep_*pin_lock(&lock).
+
+Come suggerito dal nome, la famiglia di macro lockdep_assert_held* asseriscono
+che un dato blocco in un dato momento deve essere trattenuto (altrimenti, verrà
+generato un WARN()). Queste vengono usate abbondantemente nel kernel, per
+esempio in kernel/sched/core.c::
+
+  void update_rq_clock(struct rq *rq)
+  {
+	s64 delta;
+
+	lockdep_assert_held(&rq->lock);
+	[...]
+  }
+
+dove aver trattenuto rq->lock è necessario per aggiornare in sicurezza il clock
+rq.
+
+L'altra famiglia di macro è lockdep_*pin_lock(), che a dire il vero viene usata
+solo per rq->lock ATM. Se per caso un blocco non viene trattenuto, queste
+genereranno un WARN(). Questo si rivela particolarmente utile quando si deve
+verificare la correttezza di codice con *callback*, dove livelli superiori
+potrebbero assumere che un blocco rimanga trattenuto, ma livelli inferiori
+potrebbero invece pensare che il blocco possa essere rilasciato e poi
+riacquisito (involontariamente si apre una sezione critica). lockdep_pin_lock()
+restituisce 'struct pin_cookie' che viene usato da lockdep_unpin_lock() per
+verificare che nessuno abbia manomesso il blocco. Per esempio in
+kernel/sched/sched.h abbiamo::
+
+  static inline void rq_pin_lock(struct rq *rq, struct rq_flags *rf)
+  {
+	rf->cookie = lockdep_pin_lock(&rq->lock);
+	[...]
+  }
+
+  static inline void rq_unpin_lock(struct rq *rq, struct rq_flags *rf)
+  {
+	[...]
+	lockdep_unpin_lock(&rq->lock, rf->cookie);
+  }
+
+I commenti riguardo alla sincronizzazione possano fornire informazioni utili,
+tuttavia sono le verifiche in esecuzione effettuate da queste macro ad essere
+vitali per scovare problemi di sincronizzazione, ed inoltre forniscono lo stesso
+livello di informazioni quando si ispeziona il codice. Nel dubbio, preferite
+queste annotazioni!
+
+Dimostrazione di correttezza al 100%
+------------------------------------
+
+Il validatore verifica la proprietà di chiusura in senso matematico. Ovvero, per
+ogni sequenza di sincronizzazione di un singolo processo che si verifichi almeno
+una volta nel kernel, il validatore dimostrerà con una certezza del 100% che
+nessuna combinazione e tempistica di queste sequenze possa causare uno stallo in
+una qualsiasi classe di blocco. [1]_
+
+In pratica, per dimostrare l'esistenza di uno stallo non servono complessi
+scenari di sincronizzazione multi-processore e multi-processo. Il validatore può
+dimostrare la correttezza basandosi sulla sola sequenza di sincronizzazione
+apparsa almeno una volta (in qualunque momento, in qualunque processo o
+contesto). Uno scenario complesso che avrebbe bisogno di 3 processori e una
+sfortunata presenza di processi, interruzioni, e pessimo tempismo, può essere
+riprodotto su un sistema a singolo processore.
+
+Questo riduce drasticamente la complessità del controllo di qualità della
+sincronizzazione nel kernel: quello che deve essere fatto è di innescare nel
+kernel quante più possibili "semplici" sequenze di sincronizzazione, almeno una
+volta, allo scopo di dimostrarne la correttezza. Questo al posto di innescare
+una verifica per ogni possibile combinazione di sincronizzazione fra processori,
+e differenti scenari con hardirq e softirq e annidamenti vari (nella pratica,
+impossibile da fare)
+
+.. [1]
+
+   assumendo che il validatore sia corretto al 100%, e che nessun altra parte
+   del sistema possa corromperne lo stato. Assumiamo anche che tutti i percorsi
+   MNI/SMM [potrebbero interrompere anche percorsi dove le interruzioni sono
+   disabilitate] sono corretti e non interferiscono con il validatore. Inoltre,
+   assumiamo che un hash a 64-bit sia unico per ogni sequenza di
+   sincronizzazione nel sistema. Infine, la ricorsione dei blocchi non deve
+   essere maggiore di 20.
+
+Prestazione
+-----------
+
+Le regole sopracitate hanno bisogno di una quantità **enorme** di verifiche
+durante l'esecuzione. Il sistema sarebbe diventato praticamente inutilizzabile
+per la sua lentezza se le avessimo fatte davvero per ogni blocco trattenuto e
+per ogni abilitazione delle interruzioni. La complessità della verifica è
+O(N^2), quindi avremmo dovuto fare decine di migliaia di verifiche per ogni
+evento, il tutto per poche centinaia di classi.
+
+Il problema è stato risolto facendo una singola verifica per ogni 'scenario di
+sincronizzazione' (una sequenza unica di blocchi trattenuti uno dopo l'altro).
+Per farlo, viene mantenuta una pila dei blocchi trattenuti, e viene calcolato un
+hash a 64-bit unico per ogni sequenza. Quando la sequenza viene verificata per
+la prima volta, l'hash viene inserito in una tabella hash. La tabella potrà
+essere verificata senza bisogno di blocchi. Se la sequenza dovesse ripetersi, la
+tabella ci dirà che non è necessario verificarla nuovamente.
+
+Risoluzione dei problemi
+------------------------
+
+Il massimo numero di classi di blocco che il validatore può tracciare è:
+MAX_LOCKDEP_KEYS. Oltrepassare questo limite indurrà lokdep a generare il
+seguente avviso::
+
+	(DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS))
+
+Di base questo valore è 8191, e un classico sistema da ufficio ha meno di 1000
+classi, dunque questo avviso è solitamente la conseguenza di un problema di
+perdita delle classi di blocco o d'inizializzazione dei blocchi. Di seguito una
+descrizione dei due problemi:
+
+1. caricare e rimuovere continuamente i moduli mentre il validatore è in
+   esecuzione porterà ad una perdita di classi di blocco. Il problema è che ogni
+   caricamento crea un nuovo insieme di classi di blocco per tutti i blocchi di
+   quel modulo. Tuttavia, la rimozione del modulo non rimuove le vecchie classi
+   (vedi dopo perché non le riusiamo). Dunque, il continuo caricamento e
+   rimozione di un modulo non fa altro che aumentare il contatore di classi fino
+   a raggiungere, eventualmente, il limite.
+
+2. Usare array con un gran numero di blocchi che non vengono esplicitamente
+   inizializzati. Per esempio, una tabella hash con 8192 *bucket* dove ognuno ha
+   il proprio spinlock_t consumerà 8192 classi di blocco a meno che non vengano
+   esplicitamente inizializzati in esecuzione usando spin_lock_init() invece
+   dell'inizializzazione durante la compilazione con __SPIN_LOCK_UNLOCKED().
+   Sbagliare questa inizializzazione garantisce un esaurimento di classi di
+   blocco. Viceversa, un ciclo che invoca spin_lock_init() su tutti i blocchi li
+   mapperebbe tutti alla stessa classe di blocco.
+
+   La morale della favola è che dovete sempre inizializzare esplicitamente i
+   vostri blocchi.
+
+Qualcuno potrebbe argomentare che il validatore debba permettere il riuso di
+classi di blocco. Tuttavia, se siete tentati dall'argomento, prima revisionate
+il codice e pensate alla modifiche necessarie, e tenendo a mente che le classi
+di blocco da rimuovere probabilmente sono legate al grafo delle dipendenze. Più
+facile a dirsi che a farsi.
+
+Ovviamente, se non esaurite le classi di blocco, la prossima cosa da fare è
+quella di trovare le classi non funzionanti. Per prima cosa, il seguente comando
+ritorna il numero di classi attualmente in uso assieme al valore massimo::
+
+	grep "lock-classes" /proc/lockdep_stats
+
+Questo comando produce il seguente messaggio::
+
+	lock-classes:                          748 [max: 8191]
+
+Se il numero di assegnazioni (748 qui sopra) aumenta continuamente nel tempo,
+allora c'è probabilmente un problema da qualche parte. Il seguente comando può
+essere utilizzato per identificare le classi di blocchi problematiche::
+
+	grep "BD" /proc/lockdep
+
+Eseguite il comando e salvatene l'output, quindi confrontatelo con l'output di
+un'esecuzione successiva per identificare eventuali problemi. Questo stesso
+output può anche aiutarti a trovare situazioni in cui l'inizializzazione del
+blocco è stata omessa.
+
+Lettura ricorsiva dei blocchi
+-----------------------------
+
+Il resto di questo documento vuole dimostrare che certi cicli equivalgono ad una
+possibilità di stallo.
+
+Ci sono tre tipi di bloccatori: gli scrittori (bloccatori esclusivi, come
+spin_lock() o write_lock()), lettori non ricorsivi (bloccatori condivisi, come
+down_read()), e lettori ricorsivi (bloccatori condivisi ricorsivi, come
+rcu_read_lock()). D'ora in poi, per questi tipi di bloccatori, useremo la
+seguente notazione:
+
+    W o E: per gli scrittori (bloccatori esclusivi) (W dall'inglese per
+           *Writer*, ed E per *Exclusive*).
+
+    r: per i lettori non ricorsivi (r dall'inglese per *reader*).
+
+    R: per i lettori ricorsivi (R dall'inglese per *Reader*).
+
+    S: per qualsiasi lettore (non ricorsivi + ricorsivi), dato che entrambe
+       sono bloccatori condivisi (S dall'inglese per *Shared*).
+
+    N: per gli scrittori ed i lettori non ricorsivi, dato che entrambe sono
+       non ricorsivi.
+
+Ovviamente, N equivale a "r o W" ed S a "r o R".
+
+Come suggerisce il nome, i lettori ricorsivi sono dei bloccatori a cui è
+permesso di acquisire la stessa istanza di blocco anche all'interno della
+sezione critica di un altro lettore. In altre parole, permette di annidare la
+stessa istanza di blocco nelle sezioni critiche dei lettori.
+
+Dall'altro canto, lo stesso comportamento indurrebbe un lettore non ricorsivo ad
+auto infliggersi uno stallo.
+
+La differenza fra questi due tipi di lettori esiste perché: quelli ricorsivi
+vengono bloccati solo dal trattenimento di un blocco di scrittura, mentre quelli
+non ricorsivi possono essere bloccati dall'attesa di un blocco di scrittura.
+Consideriamo il seguente esempio::
+
+    TASK A:            TASK B:
+
+    read_lock(X);
+                       write_lock(X);
+    read_lock_2(X);
+
+L'attività A acquisisce il blocco di lettura X (non importa se di tipo ricorsivo
+o meno) usando read_lock(). Quando l'attività B tenterà di acquisire il blocco
+X, si fermerà e rimarrà in attesa che venga rilasciato. Ora se read_lock_2() è
+un tipo lettore ricorsivo, l'attività A continuerà perché gli scrittori in
+attesa non possono bloccare lettori ricorsivi, e non avremo alcuno stallo.
+Tuttavia, se read_lock_2() è un lettore non ricorsivo, allora verrà bloccato
+dall'attività B e si causerà uno stallo.
+
+Condizioni bloccanti per lettori/scrittori su uno stesso blocco
+---------------------------------------------------------------
+Essenzialmente ci sono quattro condizioni bloccanti:
+
+1. Uno scrittore blocca un altro scrittore.
+2. Un lettore blocca uno scrittore.
+3. Uno scrittore blocca sia i lettori ricorsivi che non ricorsivi.
+4. Un lettore (ricorsivo o meno) non blocca altri lettori ricorsivi ma potrebbe
+   bloccare quelli non ricorsivi (perché potrebbero esistere degli scrittori in
+   attesa).
+
+Di seguito le tabella delle condizioni bloccanti, Y (*Yes*) significa che il
+tipo in riga blocca quello in colonna, mentre N l'opposto.
+
+    +---+---+---+---+
+    |   | W | r | R |
+    +---+---+---+---+
+    | W | Y | Y | Y |
+    +---+---+---+---+
+    | r | Y | Y | N |
+    +---+---+---+---+
+    | R | Y | Y | N |
+    +---+---+---+---+
+
+    (W: scrittori, r: lettori non ricorsivi, R: lettori ricorsivi)
+
+Al contrario dei blocchi per lettori non ricorsivi, quelli ricorsivi vengono
+trattenuti da chi trattiene il blocco di scrittura piuttosto che da chi ne
+attende il rilascio. Per esempio::
+
+	TASK A:			TASK B:
+
+	read_lock(X);
+
+				write_lock(X);
+
+	read_lock(X);
+
+non produce uno stallo per i lettori ricorsivi, in quanto il processo B rimane
+in attesta del blocco X, mentre il secondo read_lock() non ha bisogno di
+aspettare perché si tratta di un lettore ricorsivo. Tuttavia, se read_lock()
+fosse un lettore non ricorsivo, questo codice produrrebbe uno stallo.
+
+Da notare che in funzione dell'operazione di blocco usate per l'acquisizione (in
+particolare il valore del parametro 'read' in lock_acquire()), un blocco può
+essere di scrittura (blocco esclusivo), di lettura non ricorsivo (blocco
+condiviso e non ricorsivo), o di lettura ricorsivo (blocco condiviso e
+ricorsivo). In altre parole, per un'istanza di blocco esistono tre tipi di
+acquisizione che dipendono dalla funzione di acquisizione usata: esclusiva, di
+lettura non ricorsiva, e di lettura ricorsiva.
+
+In breve, chiamiamo "non ricorsivi" blocchi di scrittura e quelli di lettura non
+ricorsiva, mentre "ricorsivi" i blocchi di lettura ricorsivi.
+
+I blocchi ricorsivi non si bloccano a vicenda, mentre quelli non ricorsivi sì
+(anche in lettura). Un blocco di lettura non ricorsivi può bloccare uno
+ricorsivo, e viceversa.
+
+Il seguente esempio mostra uno stallo con blocchi ricorsivi::
+
+	TASK A:			TASK B:
+
+	read_lock(X);
+				read_lock(Y);
+	write_lock(Y);
+				write_lock(X);
+
+Il processo A attende che il processo B esegua read_unlock() so Y, mentre il
+processo B attende che A esegua read_unlock() su X.
+
+Tipi di dipendenze e percorsi forti
+-----------------------------------
+Le dipendenze fra blocchi tracciano l'ordine con cui una coppia di blocchi viene
+acquisita, e perché vi sono 3 tipi di bloccatori, allora avremo 9 tipi di
+dipendenze. Tuttavia, vi mostreremo che 4 sono sufficienti per individuare gli
+stalli.
+
+Per ogni dipendenza fra blocchi avremo::
+
+  L1 -> L2
+
+Questo significa che lockdep ha visto acquisire L1 prima di L2 nello stesso
+contesto di esecuzione. Per quanto riguarda l'individuazione degli stalli, ci
+interessa sapere se possiamo rimanere bloccati da L2 mentre L1 viene trattenuto.
+In altre parole, vogliamo sapere se esiste un bloccatore L3 che viene bloccato
+da L1 e un L2 che viene bloccato da L3. Dunque, siamo interessati a (1) quello
+che L1 blocca e (2) quello che blocca L2. Di conseguenza, possiamo combinare
+lettori ricorsivi e non per L1 (perché bloccano gli stessi tipi) e possiamo
+combinare scrittori e lettori non ricorsivi per L2 (perché vengono bloccati
+dagli stessi tipi).
+
+Con questa semplificazione, possiamo dedurre che ci sono 4 tipi di rami nel
+grafo delle dipendenze di lockdep:
+
+1) -(ER)->:
+            dipendenza da scrittore esclusivo a lettore ricorsivo. "X -(ER)-> Y"
+            significa X -> Y, dove X è uno scrittore e Y un lettore ricorsivo.
+
+2) -(EN)->:
+            dipendenza da scrittore esclusivo a bloccatore non ricorsivo.
+            "X -(EN)->" significa X-> Y, dove X è uno scrittore e Y può essere
+            o uno scrittore o un lettore non ricorsivo.
+
+3) -(SR)->:
+            dipendenza da lettore condiviso a lettore ricorsivo. "X -(SR)->"
+            significa X -> Y, dove X è un lettore (ricorsivo o meno) e Y è un
+            lettore ricorsivo.
+
+4) -(SN)->:
+            dipendenza da lettore condiviso a bloccatore non ricorsivo.
+            "X -(SN)-> Y" significa X -> Y , dove X è un lettore (ricorsivo
+            o meno) e Y può essere o uno scrittore o un lettore non ricorsivo.
+
+Da notare che presi due blocchi, questi potrebbero avere più dipendenza fra di
+loro. Per esempio::
+
+	TASK A:
+
+	read_lock(X);
+	write_lock(Y);
+	...
+
+	TASK B:
+
+	write_lock(X);
+	write_lock(Y);
+
+Nel grafo delle dipendenze avremo sia X -(SN)-> Y che X -(EN)-> Y.
+
+Usiamo -(xN)-> per rappresentare i rami sia per -(EN)-> che -(SN)->, allo stesso
+modo -(Ex)->, -(xR)-> e -(Sx)->
+
+Un "percorso" in un grafo è una serie di nodi e degli archi che li congiungono.
+Definiamo un percorso "forte", come il percorso che non ha archi (dipendenze) di
+tipo -(xR)-> e -(Sx)->. In altre parole, un percorso "forte" è un percorso da un
+blocco ad un altro attraverso le varie dipendenze, e se sul percorso abbiamo X
+-> Y -> Z (dove X, Y, e Z sono blocchi), e da X a Y si ha una dipendenza -(SR)->
+o -(ER)->, allora fra Y e Z non deve esserci una dipendenza -(SN)-> o -(SR)->.
+
+Nella prossima sezione vedremo perché definiamo questo percorso "forte".
+
+Identificazione di stalli da lettura ricorsiva
+----------------------------------------------
+Ora vogliamo dimostrare altre due cose:
+
+Lemma 1:
+
+Se esiste un percorso chiuso forte (ciclo forte), allora esiste anche una
+combinazione di sequenze di blocchi che causa uno stallo. In altre parole,
+l'esistenza di un ciclo forte è sufficiente alla scoperta di uno stallo.
+
+Lemma 2:
+
+Se non esiste un percorso chiuso forte (ciclo forte), allora non esiste una
+combinazione di sequenze di blocchi che causino uno stallo. In altre parole, i
+cicli forti sono necessari alla rilevazione degli stallo.
+
+Con questi due lemmi possiamo facilmente affermare che un percorso chiuso forte
+è sia sufficiente che necessario per avere gli stalli, dunque averli equivale
+alla possibilità di imbattersi concretamente in uno stallo. Un percorso chiuso
+forte significa che può causare stalli, per questo lo definiamo "forte", ma ci
+sono anche cicli di dipendenze che non causeranno stalli.
+
+Dimostrazione di sufficienza (lemma 1):
+
+Immaginiamo d'avere un ciclo forte::
+
+    L1 -> L2 ... -> Ln -> L1
+
+Questo significa che abbiamo le seguenti dipendenze::
+
+    L1   -> L2
+    L2   -> L3
+    ...
+    Ln-1 -> Ln
+    Ln   -> L1
+
+Ora possiamo costruire una combinazione di sequenze di blocchi che causano lo
+stallo.
+
+Per prima cosa facciamo sì che un processo/processore prenda L1 in L1 -> L2, poi
+un altro prende L2 in L2 -> L3, e così via. Alla fine, tutti i Lx in Lx -> Lx+1
+saranno trattenuti da processi/processori diversi.
+
+Poi visto che abbiamo L1 -> L2, chi trattiene L1 vorrà acquisire L2 in L1 -> L2,
+ma prima dovrà attendere che venga rilasciato da chi lo trattiene. Questo perché
+L2 è già trattenuto da un altro processo/processore, ed in più L1 -> L2 e L2 ->
+L3 non sono -(xR)-> né -(Sx)-> (la definizione di forte). Questo significa che L2
+in L1 -> L2 non è un bloccatore non ricorsivo (bloccabile da chiunque), e L2 in
+L2 -> L3 non è uno scrittore (che blocca chiunque).
+
+In aggiunta, possiamo trarre una simile conclusione per chi sta trattenendo L2:
+deve aspettare che L3 venga rilasciato, e così via. Ora possiamo dimostrare che
+chi trattiene Lx deve aspettare che Lx+1 venga rilasciato. Notiamo che Ln+1 è
+L1, dunque si è creato un ciclo dal quale non possiamo uscire, quindi si ha uno
+stallo.
+
+Dimostrazione della necessità (lemma 2):
+
+Questo lemma equivale a dire che: se siamo in uno scenario di stallo, allora
+deve esiste un ciclo forte nel grafo delle dipendenze.
+
+Secondo Wikipedia[1], se c'è uno stallo, allora deve esserci un ciclo di attese,
+ovvero ci sono N processi/processori dove P1 aspetta un blocco trattenuto da P2,
+e P2 ne aspetta uno trattenuto da P3, ... e Pn attende che il blocco P1 venga
+rilasciato. Chiamiamo Lx il blocco che attende Px, quindi P1 aspetta L1 e
+trattiene Ln. Quindi avremo Ln -> L1 nel grafo delle dipendenze. Similarmente,
+nel grafo delle dipendenze avremo L1 -> L2, L2 -> L3, ..., Ln-1 -> Ln, il che
+significa che abbiamo un ciclo::
+
+	Ln -> L1 -> L2 -> ... -> Ln
+
+, ed ora dimostriamo d'avere un ciclo forte.
+
+Per un blocco Lx, il processo Px contribuisce alla dipendenza Lx-1 -> Lx e Px+1
+contribuisce a quella Lx -> Lx+1. Visto che Px aspetta che Px+1 rilasci Lx, sarà
+impossibile che Lx in Px+1 sia un lettore e che Lx in Px sia un lettore
+ricorsivo. Questo perché i lettori (ricorsivi o meno) non bloccano lettori
+ricorsivi. Dunque, Lx-1 -> Lx e Lx -> Lx+1 non possono essere una coppia di
+-(xR)-> -(Sx)->. Questo è vero per ogni ciclo, dunque, questo è un ciclo forte.
+
+Riferimenti
+-----------
+
+[1]: https://it.wikipedia.org/wiki/Stallo_(informatica)
+
+[2]: Shibu, K. (2009). Intro To Embedded Systems (1st ed.). Tata McGraw-Hill
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/locking/lockstat.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/lockstat.rst
new file mode 100644
index 000000000000..77972d971d7c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/lockstat.rst
@@ -0,0 +1,230 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-ita.rst
+
+=======================
+Statistiche sui blocchi
+=======================
+
+Cosa
+====
+
+Come suggerisce il nome, fornisce statistiche sui blocchi.
+
+
+Perché
+======
+
+Perché, tanto per fare un esempio, le contese sui blocchi possono influenzare
+significativamente le prestazioni.
+
+Come
+====
+
+*Lockdep* ha punti di collegamento nelle funzioni di blocco e inoltre
+mappa le istanze di blocco con le relative classi. Partiamo da questo punto
+(vedere Documentation/translations/it_IT/locking/lockdep-design.rst).
+Il grafico sottostante mostra la relazione che intercorre fra le
+funzioni di blocco e i vari punti di collegamenti che ci sono al loro
+interno::
+
+        __acquire
+            |
+           lock _____
+            |        \
+            |    __contended
+            |         |
+            |       <wait>
+            | _______/
+            |/
+            |
+       __acquired
+            |
+            .
+          <hold>
+            .
+            |
+       __release
+            |
+         unlock
+
+  lock, unlock	- le classiche funzioni di blocco
+  __*		- i punti di collegamento
+  <> 		- stati
+
+Grazie a questi punti di collegamento possiamo fornire le seguenti statistiche:
+
+con-bounces
+  - numero di contese su un blocco che riguarda dati di un processore
+
+contentions
+  - numero di acquisizioni di blocchi che hanno dovuto attendere
+
+wait time
+  min
+    - tempo minimo (diverso da zero) che sia mai stato speso in attesa di
+      un blocco
+
+  max
+    - tempo massimo che sia mai stato speso in attesa di un blocco
+
+  total
+    - tempo totale speso in attesa di un blocco
+
+  avg
+	- tempo medio speso in attesa di un blocco
+
+acq-bounces
+  - numero di acquisizioni di blocco che riguardavano i dati su un processore
+
+acquisitions
+  - numero di volte che un blocco è stato ottenuto
+
+hold time
+  min
+    - tempo minimo (diverso da zero) che sia mai stato speso trattenendo un blocco
+
+  max
+    - tempo massimo che sia mai stato speso trattenendo un blocco
+
+  total
+    - tempo totale di trattenimento di un blocco
+
+  avg
+    - tempo medio di trattenimento di un blocco
+
+Questi numeri vengono raccolti per classe di blocco, e per ogni stato di
+lettura/scrittura (quando applicabile).
+
+Inoltre, questa raccolta di statistiche tiene traccia di 4 punti di contesa
+per classe di blocco. Un punto di contesa è una chiamata che ha dovuto
+aspettare l'acquisizione di un blocco.
+
+Configurazione
+--------------
+
+Le statistiche sui blocchi si abilitano usando l'opzione di configurazione
+CONFIG_LOCK_STAT.
+
+Uso
+---
+
+Abilitare la raccolta di statistiche::
+
+	# echo 1 >/proc/sys/kernel/lock_stat
+
+Disabilitare la raccolta di statistiche::
+
+	# echo 0 >/proc/sys/kernel/lock_stat
+
+Per vedere le statistiche correnti sui blocchi::
+
+  ( i numeri di riga non fanno parte dell'output del comando, ma sono stati
+  aggiunti ai fini di questa spiegazione )
+
+  # less /proc/lock_stat
+
+  01 lock_stat version 0.4
+  02-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  03                              class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg
+  04-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  05
+  06                         &mm->mmap_sem-W:            46             84           0.26         939.10       16371.53         194.90          47291        2922365           0.16     2220301.69 17464026916.32        5975.99
+  07                         &mm->mmap_sem-R:            37            100           1.31      299502.61      325629.52        3256.30         212344       34316685           0.10        7744.91    95016910.20           2.77
+  08                         ---------------
+  09                           &mm->mmap_sem              1          [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280
+  10                           &mm->mmap_sem             96          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+  11                           &mm->mmap_sem             34          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
+  12                           &mm->mmap_sem             17          [<ffffffff81127e71>] vm_munmap+0x41/0x80
+  13                         ---------------
+  14                           &mm->mmap_sem              1          [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0
+  15                           &mm->mmap_sem             60          [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250
+  16                           &mm->mmap_sem             41          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+  17                           &mm->mmap_sem             68          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
+  18
+  19.............................................................................................................................................................................................................................
+  20
+  21                         unix_table_lock:           110            112           0.21          49.24         163.91           1.46          21094          66312           0.12         624.42       31589.81           0.48
+  22                         ---------------
+  23                         unix_table_lock             45          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
+  24                         unix_table_lock             47          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
+  25                         unix_table_lock             15          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
+  26                         unix_table_lock              5          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
+  27                         ---------------
+  28                         unix_table_lock             39          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
+  29                         unix_table_lock             49          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
+  30                         unix_table_lock             20          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
+  31                         unix_table_lock              4          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
+
+Questo estratto mostra le statistiche delle prime due classi di
+blocco. La riga 01 mostra la versione dell'output - la versione
+cambierà ogni volta che cambia il formato. Le righe dalla 02 alla 04
+rappresentano l'intestazione con la descrizione delle colonne. Le
+statistiche sono mostrate nelle righe dalla 05 alla 18 e dalla 20
+alla 31. Queste statistiche sono divise in due parti: le statistiche,
+seguite dai punti di contesa (righe 08 e 13) separati da un divisore.
+
+Le righe dalla 09 alla 12 mostrano i primi quattro punti di contesa
+registrati (il codice che tenta di acquisire un blocco) e le righe
+dalla 14 alla 17 mostrano i primi quattro punti contesi registrati
+(ovvero codice che ha acquisito un blocco). È possibile che nelle
+statistiche manchi il valore *max con-bounces*.
+
+Il primo blocco (righe dalla 05 alla 18) è di tipo lettura/scrittura e quindi
+mostra due righe prima del divisore. I punti di contesa non corrispondono alla
+descrizione delle colonne nell'intestazione; essi hanno due colonne: *punti di
+contesa* e *[<IP>] simboli*. Il secondo gruppo di punti di contesa sono i punti
+con cui si contende il blocco.
+
+La parte interna del tempo è espressa in us (microsecondi).
+
+Quando si ha a che fare con blocchi annidati si potrebbero vedere le
+sottoclassi di blocco::
+
+  32...........................................................................................................................................................................................................................
+  33
+  34                               &rq->lock:       13128          13128           0.43         190.53      103881.26           7.91          97454        3453404           0.00         401.11    13224683.11           3.82
+  35                               ---------
+  36                               &rq->lock          645          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
+  37                               &rq->lock          297          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+  38                               &rq->lock          360          [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a
+  39                               &rq->lock          428          [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb
+  40                               ---------
+  41                               &rq->lock           77          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
+  42                               &rq->lock          174          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+  43                               &rq->lock         4715          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
+  44                               &rq->lock          893          [<ffffffff81340524>] schedule+0x157/0x7b8
+  45
+  46...........................................................................................................................................................................................................................
+  47
+  48                             &rq->lock/1:        1526          11488           0.33         388.73      136294.31          11.86          21461          38404           0.00          37.93      109388.53           2.84
+  49                             -----------
+  50                             &rq->lock/1        11526          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
+  51                             -----------
+  52                             &rq->lock/1         5645          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
+  53                             &rq->lock/1         1224          [<ffffffff81340524>] schedule+0x157/0x7b8
+  54                             &rq->lock/1         4336          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
+  55                             &rq->lock/1          181          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+
+La riga 48 mostra le statistiche per la seconda sottoclasse (/1) della
+classe *&irq->lock* (le sottoclassi partono da 0); in questo caso,
+come suggerito dalla riga 50, ``double_rq_lock`` tenta di acquisire un blocco
+annidato di due spinlock.
+
+Per vedere i blocco più contesi::
+
+  # grep : /proc/lock_stat | head
+			clockevents_lock:       2926159        2947636           0.15       46882.81  1784540466.34         605.41        3381345        3879161           0.00        2260.97    53178395.68          13.71
+		     tick_broadcast_lock:        346460         346717           0.18        2257.43    39364622.71         113.54        3642919        4242696           0.00        2263.79    49173646.60          11.59
+		  &mapping->i_mmap_mutex:        203896         203899           3.36      645530.05 31767507988.39      155800.21        3361776        8893984           0.17        2254.15    14110121.02           1.59
+			       &rq->lock:        135014         136909           0.18         606.09      842160.68           6.15        1540728       10436146           0.00         728.72    17606683.41           1.69
+	       &(&zone->lru_lock)->rlock:         93000          94934           0.16          59.18      188253.78           1.98        1199912        3809894           0.15         391.40     3559518.81           0.93
+			 tasklist_lock-W:         40667          41130           0.23        1189.42      428980.51          10.43         270278         510106           0.16         653.51     3939674.91           7.72
+			 tasklist_lock-R:         21298          21305           0.20        1310.05      215511.12          10.12         186204         241258           0.14        1162.33     1179779.23           4.89
+			      rcu_node_1:         47656          49022           0.16         635.41      193616.41           3.95         844888        1865423           0.00         764.26     1656226.96           0.89
+       &(&dentry->d_lockref.lock)->rlock:         39791          40179           0.15        1302.08       88851.96           2.21        2790851       12527025           0.10        1910.75     3379714.27           0.27
+			      rcu_node_0:         29203          30064           0.16         786.55     1555573.00          51.74          88963         244254           0.00         398.87      428872.51           1.76
+
+Per cancellare le statistiche::
+
+  # echo 0 > /proc/lock_stat
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/locking/locktorture.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/locktorture.rst
new file mode 100644
index 000000000000..87a0dbeaca77
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/locktorture.rst
@@ -0,0 +1,181 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-ita.rst
+
+============================================
+Funzionamento del test *Kernel Lock Torture*
+============================================
+
+CONFIG_LOCK_TORTURE_TEST
+========================
+
+L'opzione di configurazione CONFIG_LOCK_TORTURE_TEST fornisce un
+modulo kernel che esegue delle verifiche che *torturano* le primitive di
+sincronizzazione del kernel. Se dovesse servire, il modulo kernel,
+'locktorture', può essere generato successivamente su un kernel che
+volete verificare. Periodicamente le verifiche stampano messaggi tramite
+``printk()`` e che quindi possono essere letti tramite ``dmesg`` (magari
+filtrate l'output con ``grep "torture"``). La verifica inizia quando
+il modulo viene caricato e termina quando viene rimosso. Questo
+programma si basa sulle modalità di verifica di RCU tramite rcutorture.
+
+Questa verifica consiste nella creazione di un certo numero di thread
+del kernel che acquisiscono un blocco e lo trattengono per una certa
+quantità di tempo così da simulare diversi comportamenti nelle sezioni
+critiche. La quantità di contese su un blocco può essere simulata
+allargando la sezione critica e/o creando più thread.
+
+
+Parametri del modulo
+====================
+
+Questo modulo ha i seguenti parametri:
+
+
+Specifici di locktorture
+------------------------
+
+nwriters_stress
+		  Numero di thread del kernel che stresseranno l'acquisizione
+		  esclusiva dei blocchi (scrittori). Il valore di base è il
+		  doppio del numero di processori attivi presenti.
+
+nreaders_stress
+		  Numero di thread del kernel che stresseranno l'acquisizione
+		  condivisa dei blocchi (lettori). Il valore di base è lo stesso
+		  di nwriters_stress. Se l'utente non ha specificato
+		  nwriters_stress, allora entrambe i valori corrisponderanno
+		  al numero di processori attivi presenti.
+
+torture_type
+		  Tipo di blocco da verificare. Di base, solo gli spinlock
+		  verranno verificati. Questo modulo può verificare anche
+		  i seguenti tipi di blocchi:
+
+		     - "lock_busted":
+				Simula un'incorretta implementazione del
+				blocco.
+
+		     - "spin_lock":
+				coppie di spin_lock() e spin_unlock().
+
+		     - "spin_lock_irq":
+				coppie di spin_lock_irq() e spin_unlock_irq().
+
+		     - "rw_lock":
+				coppie di rwlock read/write lock() e unlock().
+
+		     - "rw_lock_irq":
+				copie di rwlock read/write lock_irq() e
+				unlock_irq().
+
+		     - "mutex_lock":
+				coppie di mutex_lock() e mutex_unlock().
+
+		     - "rtmutex_lock":
+				coppie di rtmutex_lock() e rtmutex_unlock().
+				Il kernel deve avere CONFIG_RT_MUTEXES=y.
+
+		     - "rwsem_lock":
+				coppie di semafori read/write down() e up().
+
+
+Generici dell'ambiente di sviluppo 'torture' (RCU + locking)
+------------------------------------------------------------
+
+shutdown_secs
+		  Numero di secondi prima che la verifica termini e il sistema
+		  venga spento.  Il valore di base è zero, il che disabilita
+		  la possibilità di terminare e spegnere. Questa funzionalità
+		  può essere utile per verifiche automatizzate.
+
+onoff_interval
+		  Numero di secondi fra ogni tentativo di esecuzione di
+		  un'operazione casuale di CPU-hotplug. Di base è zero, il
+		  che disabilita la funzionalità di CPU-hotplug. Nei kernel
+		  con CONFIG_HOTPLUG_CPU=n, locktorture si rifiuterà, senza
+		  dirlo, di effettuare una qualsiasi operazione di
+		  CPU-hotplug indipendentemente dal valore specificato in
+		  onoff_interval.
+
+onoff_holdoff
+		  Numero di secondi da aspettare prima di iniziare le
+		  operazioni di CPU-hotplug.  Normalmente questo verrebbe
+		  usato solamente quando locktorture è compilato come parte
+		  integrante del kernel ed eseguito automaticamente all'avvio,
+		  in questo caso è utile perché permette di non confondere
+		  l'avvio con i processori che vanno e vengono. Questo
+		  parametro è utile sono se CONFIG_HOTPLUG_CPU è abilitato.
+
+stat_interval
+		  Numero di secondi fra una stampa (printk()) delle
+		  statistiche e l'altra. Di base, locktorture riporta le
+		  statistiche ogni 60 secondi. Impostando l'intervallo a 0
+		  ha l'effetto di stampare le statistiche -solo- quando il
+		  modulo viene rimosso.
+
+stutter
+		  Durata della verifica prima di effettuare una pausa di
+		  eguale durata. Di base "stutter=5", quindi si eseguono
+		  verifiche e pause di (circa) cinque secondi.
+		  L'impostazione di "stutter=0" fa si che la verifica
+		  venga eseguita continuamente senza fermarsi.
+
+shuffle_interval
+		  Il numero di secondi per cui un thread debba mantenere
+		  l'affinità con un sottoinsieme di processori, di base è
+		  3 secondi. Viene usato assieme a test_no_idle_hz.
+
+verbose
+		  Abilita le stampe di debug, via printk(). Di base è
+		  abilitato. Queste informazioni aggiuntive sono per la
+		  maggior parte relative ad errori di alto livello e resoconti
+		  da parte dell'struttura 'torture'.
+
+
+Statistiche
+===========
+
+Le statistiche vengono stampate secondo il seguente formato::
+
+  spin_lock-torture: Writes:  Total: 93746064  Max/Min: 0/0   Fail: 0
+     (A)		    (B)		   (C)		  (D)	       (E)
+
+  (A): tipo di lock sotto verifica -- parametro torture_type.
+
+  (B): Numero di acquisizione del blocco in scrittura. Se si ha a che fare
+       con una primitiva di lettura/scrittura apparirà di seguito anche una
+       seconda voce "Reads"
+
+  (C): Numero di volte che il blocco è stato acquisito
+
+  (D): Numero minimo e massimo di volte che un thread ha fallito
+       nell'acquisire il blocco
+
+  (E): valori true/false nel caso di errori durante l'acquisizione del blocco.
+       Questo dovrebbe dare un riscontro positivo -solo- se c'è un baco
+       nell'implementazione delle primitive di sincronizzazione. Altrimenti un
+       blocco non dovrebbe mai fallire (per esempio, spin_lock()).
+       Ovviamente lo stesso si applica per (C). Un semplice esempio è il tipo
+       "lock_busted".
+
+Uso
+===
+
+Il seguente script può essere utilizzato per verificare i blocchi::
+
+	#!/bin/sh
+
+	modprobe locktorture
+	sleep 3600
+	rmmod locktorture
+	dmesg | grep torture:
+
+L'output può essere manualmente ispezionato cercando il marcatore d'errore
+"!!!". Ovviamente potreste voler creare degli script più elaborati che
+verificano automaticamente la presenza di errori. Il comando "rmmod" forza la
+stampa (usando printk()) di "SUCCESS", "FAILURE", oppure "RCU_HOTPLUG". I primi
+due si piegano da soli, mentre l'ultimo indica che non stati trovati problemi di
+sincronizzazione, tuttavia ne sono stati trovati in CPU-hotplug.
+
+Consultate anche: Documentation/translations/it_IT/RCU/torture.rst
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/locking/locktypes.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/locktypes.rst
new file mode 100644
index 000000000000..1c7056283b9d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/locking/locktypes.rst
@@ -0,0 +1,547 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-ita.rst
+
+.. _it_kernel_hacking_locktypes:
+
+========================================
+Tipologie di blocco e le loro istruzioni
+========================================
+
+Introduzione
+============
+
+Il kernel fornisce un certo numero di primitive di blocco che possiamo dividere
+in tre categorie:
+
+  - blocchi ad attesa con sospensione
+  - blocchi locali per CPU
+  - blocchi ad attesa attiva
+
+Questo documento descrive questi tre tipi e fornisce istruzioni su come
+annidarli, ed usarli su kernel PREEMPT_RT.
+
+Categorie di blocchi
+====================
+
+Blocchi ad attesa con sospensione
+---------------------------------
+
+I blocchi ad attesa con sospensione possono essere acquisiti solo in un contesti
+dov'è possibile la prelazione.
+
+Diverse implementazioni permettono di usare try_lock() anche in altri contesti,
+nonostante ciò è bene considerare anche la sicurezza dei corrispondenti
+unlock(). Inoltre, vanno prese in considerazione anche le varianti di *debug*
+di queste primitive. Insomma, non usate i blocchi ad attesa con sospensioni in
+altri contesti a meno che proprio non vi siano alternative.
+
+In questa categoria troviamo:
+
+ - mutex
+ - rt_mutex
+ - semaphore
+ - rw_semaphore
+ - ww_mutex
+ - percpu_rw_semaphore
+
+Nei kernel con PREEMPT_RT, i seguenti blocchi sono convertiti in blocchi ad
+attesa con sospensione:
+
+ - local_lock
+ - spinlock_t
+ - rwlock_t
+
+Blocchi locali per CPU
+----------------------
+
+ - local_lock
+
+Su kernel non-PREEMPT_RT, le funzioni local_lock gestiscono le primitive di
+disabilitazione di prelazione ed interruzioni. Al contrario di altri meccanismi,
+la disabilitazione della prelazione o delle interruzioni sono puri meccanismi
+per il controllo della concorrenza su una CPU e quindi non sono adatti per la
+gestione della concorrenza inter-CPU.
+
+Blocchi ad attesa attiva
+------------------------
+
+ - raw_spinlcok_t
+ - bit spinlocks
+
+ Nei kernel non-PREEMPT_RT, i seguenti blocchi sono ad attesa attiva:
+
+ - spinlock_t
+ - rwlock_t
+
+Implicitamente, i blocchi ad attesa attiva disabilitano la prelazione e le
+funzioni lock/unlock hanno anche dei suffissi per gestire il livello di
+protezione:
+
+ ===================  =========================================================================
+ _bh()                disabilita / abilita  *bottom halves* (interruzioni software)
+ _irq()               disabilita / abilita le interruzioni
+ _irqsave/restore()   salva e disabilita le interruzioni / ripristina ed attiva le interruzioni
+ ===================  =========================================================================
+
+Semantica del proprietario
+==========================
+
+Eccetto i semafori, i sopracitati tipi di blocchi hanno tutti una semantica
+molto stringente riguardo al proprietario di un blocco:
+
+  Il contesto (attività) che ha acquisito il blocco deve rilasciarlo
+
+I semafori rw_semaphores hanno un'interfaccia speciale che permette anche ai non
+proprietari del blocco di rilasciarlo per i lettori.
+
+rtmutex
+=======
+
+I blocchi a mutua esclusione RT (*rtmutex*) sono un sistema a mutua esclusione
+con supporto all'ereditarietà della priorità (PI).
+
+Questo meccanismo ha delle limitazioni sui kernel non-PREEMPT_RT dovuti alla
+prelazione e alle sezioni con interruzioni disabilitate.
+
+Chiaramente, questo meccanismo non può avvalersi della prelazione su una sezione
+dove la prelazione o le interruzioni sono disabilitate; anche sui kernel
+PREEMPT_RT. Tuttavia, i kernel PREEMPT_RT eseguono la maggior parte delle
+sezioni in contesti dov'è possibile la prelazione, specialmente in contesti
+d'interruzione (anche software). Questa conversione permette a spinlock_t e
+rwlock_t di essere implementati usando rtmutex.
+
+semaphore
+=========
+
+La primitiva semaphore implementa un semaforo con contatore.
+
+I semafori vengono spesso utilizzati per la serializzazione e l'attesa, ma per
+nuovi casi d'uso si dovrebbero usare meccanismi diversi, come mutex e
+completion.
+
+semaphore e PREEMPT_RT
+----------------------
+
+I kernel PREEMPT_RT non cambiano l'implementazione di semaphore perché non hanno
+un concetto di proprietario, dunque impediscono a PREEMPT_RT d'avere
+l'ereditarietà della priorità sui semafori. Un proprietario sconosciuto non può
+ottenere una priorità superiore. Di consequenza, bloccarsi sui semafori porta
+all'inversione di priorità.
+
+
+rw_semaphore
+============
+
+Il blocco rw_semaphore è un meccanismo che permette più lettori ma un solo scrittore.
+
+Sui kernel non-PREEMPT_RT l'implementazione è imparziale, quindi previene
+l'inedia dei processi scrittori.
+
+Questi blocchi hanno una semantica molto stringente riguardo il proprietario, ma
+offre anche interfacce speciali che permettono ai processi non proprietari di
+rilasciare un processo lettore. Queste interfacce funzionano indipendentemente
+dalla configurazione del kernel.
+
+rw_semaphore e PREEMPT_RT
+-------------------------
+
+I kernel PREEMPT_RT sostituiscono i rw_semaphore con un'implementazione basata
+su rt_mutex, e questo ne modifica l'imparzialità:
+
+ Dato che uno scrittore rw_semaphore non può assicurare la propria priorità ai
+ suoi lettori, un lettore con priorità più bassa che ha subito la prelazione
+ continuerà a trattenere il blocco, quindi porta all'inedia anche gli scrittori
+ con priorità più alta. Per contro, dato che i lettori possono garantire la
+ propria priorità agli scrittori, uno scrittore a bassa priorità che subisce la
+ prelazione vedrà la propria priorità alzata finché non rilascerà il blocco, e
+ questo preverrà l'inedia dei processi lettori a causa di uno scrittore.
+
+
+local_lock
+==========
+
+I local_lock forniscono nomi agli ambiti di visibilità delle sezioni critiche
+protette tramite la disattivazione della prelazione o delle interruzioni.
+
+Sui kernel non-PREEMPT_RT le operazioni local_lock si traducono
+nell'abilitazione o disabilitazione della prelazione o le interruzioni.
+
+ ===============================  ======================
+ local_lock(&llock)               preempt_disable()
+ local_unlock(&llock)             preempt_enable()
+ local_lock_irq(&llock)           local_irq_disable()
+ local_unlock_irq(&llock)         local_irq_enable()
+ local_lock_irqsave(&llock)       local_irq_save()
+ local_unlock_irqrestore(&llock)  local_irq_restore()
+ ===============================  ======================
+
+Gli ambiti di visibilità con nome hanno due vantaggi rispetto alle primitive di
+base:
+
+  - Il nome del blocco permette di fare un'analisi statica, ed è anche chiaro su
+    cosa si applichi la protezione cosa che invece non si può fare con le
+    classiche primitive in quanto sono opache e senza alcun ambito di
+    visibilità.
+
+  - Se viene abilitato lockdep, allora local_lock ottiene un lockmap che
+    permette di verificare la bontà della protezione. Per esempio, questo può
+    identificare i casi dove una funzione usa preempt_disable() come meccanismo
+    di protezione in un contesto d'interruzione (anche software). A parte
+    questo, lockdep_assert_held(&llock) funziona come tutte le altre primitive
+    di sincronizzazione.
+
+local_lock e PREEMPT_RT
+-------------------------
+
+I kernel PREEMPT_RT sostituiscono local_lock con uno spinlock_t per CPU, quindi
+ne cambia la semantica:
+
+  - Tutte le modifiche a spinlock_t si applicano anche a local_lock
+
+L'uso di local_lock
+-------------------
+
+I local_lock dovrebbero essere usati su kernel non-PREEMPT_RT quando la
+disabilitazione della prelazione o delle interruzioni è il modo più adeguato per
+gestire l'accesso concorrente a strutture dati per CPU.
+
+Questo meccanismo non è adatto alla protezione da prelazione o interruzione su
+kernel PREEMPT_RT dato che verrà convertito in spinlock_t.
+
+
+raw_spinlock_t e spinlock_t
+===========================
+
+raw_spinlock_t
+--------------
+
+I blocco raw_spinlock_t è un blocco ad attesa attiva su tutti i tipi di kernel,
+incluso quello PREEMPT_RT. Usate raw_spinlock_t solo in sezioni critiche nel
+cuore del codice, nella gestione delle interruzioni di basso livello, e in posti
+dove è necessario disabilitare la prelazione o le interruzioni. Per esempio, per
+accedere in modo sicuro lo stato dell'hardware. A volte, i raw_spinlock_t
+possono essere usati quando la sezione critica è minuscola, per evitare gli
+eccessi di un rtmutex.
+
+spinlock_t
+----------
+
+Il significato di spinlock_t cambia in base allo stato di PREEMPT_RT.
+
+Sui kernel non-PREEMPT_RT, spinlock_t si traduce in un raw_spinlock_t ed ha
+esattamente lo stesso significato.
+
+spinlock_t e PREEMPT_RT
+-----------------------
+
+Sui kernel PREEMPT_RT, spinlock_t ha un'implementazione dedicata che si basa
+sull'uso di rt_mutex. Questo ne modifica il significato:
+
+ - La prelazione non viene disabilitata.
+
+ - I suffissi relativi alla interruzioni (_irq, _irqsave / _irqrestore) per le
+   operazioni spin_lock / spin_unlock non hanno alcun effetto sullo stato delle
+   interruzioni della CPU.
+
+ - I suffissi relativi alle interruzioni software (_bh()) disabilitano i
+   relativi gestori d'interruzione.
+
+   I kernel non-PREEMPT_RT disabilitano la prelazione per ottenere lo stesso effetto.
+
+   I kernel PREEMPT_RT usano un blocco per CPU per la serializzazione, il che
+   permette di tenere attiva la prelazione. Il blocco disabilita i gestori
+   d'interruzione software e previene la rientranza vista la prelazione attiva.
+
+A parte quanto appena discusso, i kernel PREEMPT_RT preservano il significato
+di tutti gli altri aspetti di spinlock_t:
+
+ - Le attività che trattengono un blocco spinlock_t non migrano su altri
+   processori. Disabilitando la prelazione, i kernel non-PREEMPT_RT evitano la
+   migrazione. Invece, i kernel PREEMPT_RT disabilitano la migrazione per
+   assicurarsi che i puntatori a variabili per CPU rimangano validi anche
+   quando un'attività subisce la prelazione.
+
+ - Lo stato di un'attività si mantiene durante le acquisizioni del blocco al
+   fine di garantire che le regole basate sullo stato delle attività si possano
+   applicare a tutte le configurazioni del kernel. I kernel non-PREEMPT_RT
+   lasciano lo stato immutato. Tuttavia, la funzionalità PREEMPT_RT deve
+   cambiare lo stato se l'attività si blocca durante l'acquisizione. Dunque,
+   salva lo stato attuale prima di bloccarsi ed il rispettivo risveglio lo
+   ripristinerà come nell'esempio seguente::
+
+    task->state = TASK_INTERRUPTIBLE
+     lock()
+       block()
+         task->saved_state = task->state
+	 task->state = TASK_UNINTERRUPTIBLE
+	 schedule()
+					lock wakeup
+					  task->state = task->saved_state
+
+   Altri tipi di risvegli avrebbero impostato direttamente lo stato a RUNNING,
+   ma in questo caso non avrebbe funzionato perché l'attività deve rimanere
+   bloccata fintanto che il blocco viene trattenuto. Quindi, lo stato salvato
+   viene messo a RUNNING quando il risveglio di un non-blocco cerca di
+   risvegliare un'attività bloccata in attesa del rilascio di uno spinlock. Poi,
+   quando viene completata l'acquisizione del blocco, il suo risveglio
+   ripristinerà lo stato salvato, in questo caso a RUNNING::
+
+    task->state = TASK_INTERRUPTIBLE
+     lock()
+       block()
+         task->saved_state = task->state
+	 task->state = TASK_UNINTERRUPTIBLE
+	 schedule()
+					non lock wakeup
+					  task->saved_state = TASK_RUNNING
+
+					lock wakeup
+					  task->state = task->saved_state
+
+   Questo garantisce che il vero risveglio non venga perso.
+
+rwlock_t
+========
+
+Il blocco rwlock_t è un meccanismo che permette più lettori ma un solo scrittore.
+
+Sui kernel non-PREEMPT_RT questo è un blocco ad attesa e per i suoi suffissi si
+applicano le stesse regole per spinlock_t. La sua implementazione è imparziale,
+quindi previene l'inedia dei processi scrittori.
+
+rwlock_t e PREEMPT_RT
+---------------------
+
+Sui kernel PREEMPT_RT rwlock_t ha un'implementazione dedicata che si basa
+sull'uso di rt_mutex. Questo ne modifica il significato:
+
+ - Tutte le modifiche fatte a spinlock_t si applicano anche a rwlock_t.
+
+ - Dato che uno scrittore rw_semaphore non può assicurare la propria priorità ai
+   suoi lettori, un lettore con priorità più bassa che ha subito la prelazione
+   continuerà a trattenere il blocco, quindi porta all'inedia anche gli
+   scrittori con priorità più alta. Per contro, dato che i lettori possono
+   garantire la propria priorità agli scrittori, uno scrittore a bassa priorità
+   che subisce la prelazione vedrà la propria priorità alzata finché non
+   rilascerà il blocco, e questo preverrà l'inedia dei processi lettori a causa
+   di uno scrittore.
+
+
+Precisazioni su PREEMPT_RT
+==========================
+
+local_lock su RT
+----------------
+
+Sui kernel PREEMPT_RT Ci sono alcune implicazioni dovute alla conversione di
+local_lock in un spinlock_t. Per esempio, su un kernel non-PREEMPT_RT il
+seguente codice funzionerà come ci si aspetta::
+
+  local_lock_irq(&local_lock);
+  raw_spin_lock(&lock);
+
+ed è equivalente a::
+
+   raw_spin_lock_irq(&lock);
+
+Ma su un kernel PREEMPT_RT questo codice non funzionerà perché local_lock_irq()
+si traduce in uno spinlock_t per CPU che non disabilita né le interruzioni né la
+prelazione. Il seguente codice funzionerà su entrambe i kernel con o senza
+PREEMPT_RT::
+
+  local_lock_irq(&local_lock);
+  spin_lock(&lock);
+
+Un altro dettaglio da tenere a mente con local_lock è che ognuno di loro ha un
+ambito di protezione ben preciso. Dunque, la seguente sostituzione è errate::
+
+
+  func1()
+  {
+    local_irq_save(flags);    -> local_lock_irqsave(&local_lock_1, flags);
+    func3();
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags);
+  }
+
+  func2()
+  {
+    local_irq_save(flags);    -> local_lock_irqsave(&local_lock_2, flags);
+    func3();
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags);
+  }
+
+  func3()
+  {
+    lockdep_assert_irqs_disabled();
+    access_protected_data();
+  }
+
+Questo funziona correttamente su un kernel non-PREEMPT_RT, ma su un kernel
+PREEMPT_RT local_lock_1 e local_lock_2 sono distinti e non possono serializzare
+i chiamanti di func3(). L'*assert* di lockdep verrà attivato su un kernel
+PREEMPT_RT perché local_lock_irqsave() non disabilita le interruzione a casa
+della specifica semantica di spinlock_t in PREEMPT_RT. La corretta sostituzione
+è::
+
+  func1()
+  {
+    local_irq_save(flags);    -> local_lock_irqsave(&local_lock, flags);
+    func3();
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
+  }
+
+  func2()
+  {
+    local_irq_save(flags);    -> local_lock_irqsave(&local_lock, flags);
+    func3();
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
+  }
+
+  func3()
+  {
+    lockdep_assert_held(&local_lock);
+    access_protected_data();
+  }
+
+spinlock_t e rwlock_t
+---------------------
+
+Ci sono alcune conseguenze di cui tener conto dal cambiamento di semantica di
+spinlock_t e rwlock_t sui kernel PREEMPT_RT. Per esempio, sui kernel non
+PREEMPT_RT il seguente codice funziona come ci si aspetta::
+
+   local_irq_disable();
+   spin_lock(&lock);
+
+ed è equivalente a::
+
+   spin_lock_irq(&lock);
+
+Lo stesso vale per rwlock_t e le varianti con _irqsave().
+
+Sui kernel PREEMPT_RT questo codice non funzionerà perché gli rtmutex richiedono
+un contesto con la possibilità di prelazione. Al suo posto, usate
+spin_lock_irq() o spin_lock_irqsave() e le loro controparti per il rilascio. I
+kernel PREEMPT_RT offrono un meccanismo local_lock per i casi in cui la
+disabilitazione delle interruzioni ed acquisizione di un blocco devono rimanere
+separati. Acquisire un local_lock àncora un processo ad una CPU permettendo cose
+come un'acquisizione di un blocco con interruzioni disabilitate per singola CPU.
+
+Il tipico scenario è quando si vuole proteggere una variabile di processore nel
+contesto di un thread::
+
+
+  struct foo *p = get_cpu_ptr(&var1);
+
+  spin_lock(&p->lock);
+  p->count += this_cpu_read(var2);
+
+Questo codice è corretto su un kernel non-PREEMPT_RT, ma non lo è su un
+PREEMPT_RT. La modifica della semantica di spinlock_t su PREEMPT_RT non permette
+di acquisire p->lock perché, implicitamente, get_cpu_ptr() disabilita la
+prelazione. La seguente sostituzione funzionerà su entrambe i kernel::
+
+  struct foo *p;
+
+  migrate_disable();
+  p = this_cpu_ptr(&var1);
+  spin_lock(&p->lock);
+  p->count += this_cpu_read(var2);
+
+La funzione migrate_disable() assicura che il processo venga tenuto sulla CPU
+corrente, e di conseguenza garantisce che gli accessi per-CPU alle variabili var1 e
+var2 rimangano sulla stessa CPU fintanto che il processo rimane prelabile.
+
+La sostituzione con migrate_disable() non funzionerà nel seguente scenario::
+
+  func()
+  {
+    struct foo *p;
+
+    migrate_disable();
+    p = this_cpu_ptr(&var1);
+    p->val = func2();
+
+Questo non funziona perché migrate_disable() non protegge dal ritorno da un
+processo che aveva avuto il diritto di prelazione. Una sostituzione più adatta
+per questo caso è::
+
+  func()
+  {
+    struct foo *p;
+
+    local_lock(&foo_lock);
+    p = this_cpu_ptr(&var1);
+    p->val = func2();
+
+Su un kernel non-PREEMPT_RT, questo codice protegge dal rientro disabilitando la
+prelazione. Su un kernel PREEMPT_RT si ottiene lo stesso risultato acquisendo lo
+spinlock di CPU.
+
+raw_spinlock_t su RT
+--------------------
+
+Acquisire un raw_spinlock_t disabilita la prelazione e possibilmente anche le
+interruzioni, quindi la sezione critica deve evitare di acquisire uno spinlock_t
+o rwlock_t. Per esempio, la sezione critica non deve fare allocazioni di
+memoria. Su un kernel non-PREEMPT_RT il seguente codice funziona perfettamente::
+
+  raw_spin_lock(&lock);
+  p = kmalloc(sizeof(*p), GFP_ATOMIC);
+
+Ma lo stesso codice non funziona su un kernel PREEMPT_RT perché l'allocatore di
+memoria può essere oggetto di prelazione e quindi non può essere chiamato in un
+contesto atomico. Tuttavia, si può chiamare l'allocatore di memoria quando si
+trattiene un blocco *non-raw* perché non disabilitano la prelazione sui kernel
+PREEMPT_RT::
+
+  spin_lock(&lock);
+  p = kmalloc(sizeof(*p), GFP_ATOMIC);
+
+
+bit spinlocks
+-------------
+
+I kernel PREEMPT_RT non possono sostituire i bit spinlock perché un singolo bit
+è troppo piccolo per farci stare un rtmutex. Dunque, la semantica dei bit
+spinlock è mantenuta anche sui kernel PREEMPT_RT. Quindi, le precisazioni fatte
+per raw_spinlock_t valgono anche qui.
+
+In PREEMPT_RT, alcuni bit spinlock sono sostituiti con normali spinlock_t usando
+condizioni di preprocessore in base a dove vengono usati. Per contro, questo non
+serve quando si sostituiscono gli spinlock_t. Invece, le condizioni poste sui
+file d'intestazione e sul cuore dell'implementazione della sincronizzazione
+permettono al compilatore di effettuare la sostituzione in modo trasparente.
+
+
+Regole d'annidamento dei tipi di blocchi
+========================================
+
+Le regole principali sono:
+
+  - I tipi di blocco appartenenti alla stessa categoria possono essere annidati
+    liberamente a patto che si rispetti l'ordine di blocco al fine di evitare
+    stalli.
+
+  - I blocchi con sospensione non possono essere annidati in blocchi del tipo
+    CPU locale o ad attesa attiva
+
+  - I blocchi ad attesa attiva e su CPU locale possono essere annidati nei
+    blocchi ad attesa con sospensione.
+
+  - I blocchi ad attesa attiva possono essere annidati in qualsiasi altro tipo.
+
+Queste limitazioni si applicano ad entrambe i kernel con o senza PREEMPT_RT.
+
+Il fatto che un kernel PREEMPT_RT cambi i blocchi spinlock_t e rwlock_t dal tipo
+ad attesa attiva a quello con sospensione, e che sostituisca local_lock con uno
+spinlock_t per CPU, significa che non possono essere acquisiti quando si è in un
+blocco raw_spinlock. Ne consegue il seguente ordine d'annidamento:
+
+  1) blocchi ad attesa con sospensione
+  2) spinlock_t, rwlock_t, local_lock
+  3) raw_spinlock_t e bit spinlocks
+
+Se queste regole verranno violate, allora lockdep se ne accorgerà e questo sia
+con o senza PREEMPT_RT.
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/networking/netdev-FAQ.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/networking/netdev-FAQ.rst
deleted file mode 100644
index 8a1e049585c0..000000000000
--- linux-libre-6.8-gnu/Documentation/translations/it_IT/networking/netdev-FAQ.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. include:: ../disclaimer-ita.rst
-
-:Original: :ref:`Documentation/process/maintainer-netdev.rst <netdev-FAQ>`
-
-.. _it_netdev-FAQ:
-
-==========
-netdev FAQ
-==========
-
-.. warning::
-
-    TODO ancora da tradurre
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/process/coding-style.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/process/coding-style.rst
index 5f244e16f511..284a75ac19f8 100644
--- linux-libre-6.8-gnu/Documentation/translations/it_IT/process/coding-style.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/process/coding-style.rst
@@ -575,9 +575,9 @@ due parti ``err_free_bar:`` e ``err_free_foo:``:
 
 .. code-block:: c
 
-	 err_free_bar:
+	err_free_bar:
 		kfree(foo->bar);
-	 err_free_foo:
+	err_free_foo:
 		kfree(foo);
 		return ret;
 
@@ -671,7 +671,7 @@ segue nel vostro file .emacs:
           (c-offsets-alist . (
                   (arglist-close         . c-lineup-arglist-tabs-only)
                   (arglist-cont-nonempty .
-		      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
+                      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
                   (arglist-intro         . +)
                   (brace-list-intro      . +)
                   (c                     . c-lineup-C-comments)
diff --git linux-libre-6.8-gnu/Documentation/translations/it_IT/subsystem-apis.rst linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/subsystem-apis.rst
new file mode 100644
index 000000000000..d179af60c26d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/it_IT/subsystem-apis.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
+Documentazione dei sottosistemi del kernel
+==========================================
+
+In questa parte della documentazione si entra nel dettaglio di come funzionano
+i sottosistemi specifici del kernel dal punto di vista di uno sviluppatore del
+kernel. Molte delle informazioni qui contenute provengono direttamente dai
+sorgenti del kernel, con aggiunte di materiale dove è necessario (anche se
+talora *non* è stato aggiunto tutto ciò che era necessario).
+
+Sottosistemi principali
+-----------------------
+
+.. toctree::
+   :maxdepth: 1
+
+   core-api/index
+
+Interfacce uomo-macchina
+------------------------
+
+.. toctree::
+   :maxdepth: 1
+
+
+Interfacce di rete
+------------------
+
+.. toctree::
+   :maxdepth: 1
+
+Interfacce per l'archiviazione
+------------------------------
+
+.. toctree::
+   :maxdepth: 1
+
+
+Interfacce varie
+----------------
+
+.. toctree::
+   :maxdepth: 1
+
+   i2c/index
diff --git linux-libre-6.8-gnu/Documentation/translations/ja_JP/index.rst linux-libre-6.9-rc6-gnu/Documentation/translations/ja_JP/index.rst
index 43b9fb7246d3..0b476b429e3b 100644
--- linux-libre-6.8-gnu/Documentation/translations/ja_JP/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/ja_JP/index.rst
@@ -11,7 +11,7 @@
 .. toctree::
    :maxdepth: 1
 
-   howto
+   process/howto
 
 .. raw:: latex
 
diff --git linux-libre-6.8-gnu/Documentation/translations/ja_JP/howto.rst linux-libre-6.9-rc6-gnu/Documentation/translations/ja_JP/process/howto.rst
similarity index 100%
rename from Documentation/translations/ja_JP/howto.rst
rename to Documentation/translations/ja_JP/process/howto.rst
diff --git linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/coding-style.rst linux-libre-6.9-rc6-gnu/Documentation/translations/sp_SP/process/coding-style.rst
index a0261ba5b902..a37274764371 100644
--- linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/coding-style.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/sp_SP/process/coding-style.rst
@@ -604,9 +604,9 @@ Normalmente la solución para esto es dividirlo en dos etiquetas de error
 
 .. code-block:: c
 
-	 err_free_bar:
+	err_free_bar:
 		kfree(foo->bar);
-	 err_free_foo:
+	err_free_foo:
 		kfree(foo);
 		return ret;
 
@@ -698,7 +698,7 @@ sanos. Para hacer esto último, puede pegar lo siguiente en su archivo
           (c-offsets-alist . (
                   (arglist-close         . c-lineup-arglist-tabs-only)
                   (arglist-cont-nonempty .
-		      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
+                      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
                   (arglist-intro         . +)
                   (brace-list-intro      . +)
                   (c                     . c-lineup-C-comments)
diff --git linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/embargoed-hardware-issues.rst linux-libre-6.9-rc6-gnu/Documentation/translations/sp_SP/process/embargoed-hardware-issues.rst
index c261b428b3f0..7d4d694967c7 100644
--- linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/embargoed-hardware-issues.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/sp_SP/process/embargoed-hardware-issues.rst
@@ -273,7 +273,7 @@ revelada involucrada. La lista de embajadores actuales:
   IBM Power	Anton Blanchard <anton@linux.ibm.com>
   IBM Z		Christian Borntraeger <borntraeger@de.ibm.com>
   Intel		Tony Luck <tony.luck@intel.com>
-  Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+  Qualcomm	Trilok Soni <quic_tsoni@quicinc.com>
   Samsung	Javier González <javier.gonz@samsung.com>
 
   Microsoft	James Morris <jamorris@linux.microsoft.com>
diff --git linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/researcher-guidelines.rst linux-libre-6.9-rc6-gnu/Documentation/translations/sp_SP/process/researcher-guidelines.rst
index 462b3290b7b8..deccc908a68d 100644
--- linux-libre-6.8-gnu/Documentation/translations/sp_SP/process/researcher-guidelines.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/sp_SP/process/researcher-guidelines.rst
@@ -147,4 +147,4 @@ Si no se puede encontrar a nadie para revisar internamente los parches y necesit
 ayuda para encontrar a esa persona, o si tiene alguna otra pregunta relacionada
 con este documento y las expectativas de la comunidad de desarrolladores, por
 favor contacte con la lista de correo privada Technical Advisory Board:
-<tech-board@lists.linux-foundation.org>.
+<tech-board@groups.linuxfoundation.org>.
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst
index 17b9949d9b43..da2745464ece 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst
@@ -344,7 +344,7 @@ debugfs接口
   :ref:`sysfs接口<sysfs_interface>`。
 
 DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``,
-``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和
+``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和
 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
 
 
@@ -521,15 +521,15 @@ DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``,
 开关
 ----
 
-除非你明确地启动监测，否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on``
+除非你明确地启动监测，否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on_DEPRECATED``
 文件来启动、停止和检查监测的当前状态。写入 ``on`` 该文件可以启动对有属性的目标的监测。写入
 ``off`` 该文件则停止这些目标。如果每个目标进程被终止，DAMON也会停止。下面的示例命令开启、关
 闭和检查DAMON的状态::
 
     # cd <debugfs>/damon
-    # echo on > monitor_on
-    # echo off > monitor_on
-    # cat monitor_on
+    # echo on > monitor_on_DEPRECATED
+    # echo off > monitor_on_DEPRECATED
+    # cat monitor_on_DEPRECATED
     off
 
 请注意，当监测开启时，你不能写到上述的debugfs文件。如果你在DAMON运行时写到这些文件，将会返
@@ -543,11 +543,11 @@ DAMON通过一个叫做kdamond的内核线程来进行请求监测。你可以
 得该线程的 ``pid`` 。当监测被 ``关闭`` 时，读取该文件不会返回任何信息::
 
     # cd <debugfs>/damon
-    # cat monitor_on
+    # cat monitor_on_DEPRECATED
     off
     # cat kdamond_pid
     none
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # cat kdamond_pid
     18594
 
@@ -574,7 +574,7 @@ DAMON通过一个叫做kdamond的内核线程来进行请求监测。你可以
     # ls foo
     # ls: cannot access 'foo': No such file or directory
 
-注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目录下。
+注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目录下。
 
 
 监测结果的监测点
@@ -583,9 +583,9 @@ DAMON通过一个叫做kdamond的内核线程来进行请求监测。你可以
 DAMON通过一个tracepoint ``damon:damon_aggregated`` 提供监测结果.  当监测开启时，你可
 以记录追踪点事件，并使用追踪点支持工具如perf显示结果。比如说::
 
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # perf record -e damon:damon_aggregated &
     # sleep 5
     # kill 9 $(pidof perf)
-    # echo off > monitor_on
+    # echo off > monitor_on_DEPRECATED
     # perf script
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_CN/dev-tools/kasan.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/dev-tools/kasan.rst
index 8fdb20c9665b..2b1e8f74904b 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_CN/dev-tools/kasan.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/dev-tools/kasan.rst
@@ -137,7 +137,7 @@ KASAN受到通用 ``panic_on_warn`` 命令行参数的影响。当它被启用
 典型的KASAN报告如下所示::
 
     ==================================================================
-    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan]
+    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [kasan_test]
     Write of size 1 at addr ffff8801f44ec37b by task insmod/2760
 
     CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698
@@ -147,8 +147,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行参数的影响。当它被启用
      print_address_description+0x73/0x280
      kasan_report+0x144/0x187
      __asan_report_store1_noabort+0x17/0x20
-     kmalloc_oob_right+0xa8/0xbc [test_kasan]
-     kmalloc_tests_init+0x16/0x700 [test_kasan]
+     kmalloc_oob_right+0xa8/0xbc [kasan_test]
+     kmalloc_tests_init+0x16/0x700 [kasan_test]
      do_one_initcall+0xa5/0x3ae
      do_init_module+0x1b6/0x547
      load_module+0x75df/0x8070
@@ -168,8 +168,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行参数的影响。当它被启用
      save_stack+0x43/0xd0
      kasan_kmalloc+0xa7/0xd0
      kmem_cache_alloc_trace+0xe1/0x1b0
-     kmalloc_oob_right+0x56/0xbc [test_kasan]
-     kmalloc_tests_init+0x16/0x700 [test_kasan]
+     kmalloc_oob_right+0x56/0xbc [kasan_test]
+     kmalloc_tests_init+0x16/0x700 [kasan_test]
      do_one_initcall+0xa5/0x3ae
      do_init_module+0x1b6/0x547
      load_module+0x75df/0x8070
@@ -421,15 +421,15 @@ KASAN连接到vmap基础架构以懒清理未使用的影子内存。
 
 当由于 ``kmalloc`` 失败而导致测试失败时::
 
-        # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
+        # kmalloc_large_oob_right: ASSERTION FAILED at mm/kasan/kasan_test.c:245
         Expected ptr is not null, but is
-        not ok 4 - kmalloc_large_oob_right
+        not ok 5 - kmalloc_large_oob_right
 
 当由于缺少KASAN报告而导致测试失败时::
 
-        # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974
+        # kmalloc_double_kzfree: EXPECTATION FAILED at mm/kasan/kasan_test.c:709
         KASAN failure expected in "kfree_sensitive(ptr)", but none occurred
-        not ok 44 - kmalloc_double_kzfree
+        not ok 28 - kmalloc_double_kzfree
 
 
 最后打印所有KASAN测试的累积状态。成功::
@@ -445,7 +445,7 @@ KASAN连接到vmap基础架构以懒清理未使用的影子内存。
 1. 可加载模块
 
    启用 ``CONFIG_KUNIT`` 后，KASAN-KUnit测试可以构建为可加载模块，并通过使用
-   ``insmod`` 或 ``modprobe`` 加载 ``test_kasan.ko`` 来运行。
+   ``insmod`` 或 ``modprobe`` 加载 ``kasan_test.ko`` 来运行。
 
 2. 内置
 
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_CN/power/opp.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/power/opp.rst
index 8d6e3f6f6202..7470fa2d4c43 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_CN/power/opp.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/power/opp.rst
@@ -274,7 +274,7 @@ dev_pm_opp_get_opp_count
 	 {
 		/* 做一些事情 */
 		num_available = dev_pm_opp_get_opp_count(dev);
-		speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL);
+		speeds = kcalloc(num_available, sizeof(u32), GFP_KERNEL);
 		/* 按升序填充表 */
 		freq = 0;
 		while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) {
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/coding-style.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/process/coding-style.rst
index fa28ef0a7fee..3bc2810b151d 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/coding-style.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/process/coding-style.rst
@@ -523,9 +523,9 @@ Linux 里这是提倡的做法，因为这样可以很简单的给读者提供
 
 .. code-block:: c
 
-	 err_free_bar:
+	err_free_bar:
 		kfree(foo->bar);
-	 err_free_foo:
+	err_free_foo:
 		kfree(foo);
 		return ret;
 
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst
index cf5f1fca3d92..c90ecb557811 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/process/embargoed-hardware-issues.rst
@@ -177,7 +177,7 @@ CVE分配
   AMD		Tom Lendacky <thomas.lendacky@amd.com>
   IBM
   Intel		Tony Luck <tony.luck@intel.com>
-  Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+  Qualcomm	Trilok Soni <quic_tsoni@quicinc.com>
 
   Microsoft	Sasha Levin <sashal@kernel.org>
   VMware
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_CN/userspace-api/accelerators/ocxl.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/userspace-api/accelerators/ocxl.rst
index 845b932bf935..aefad87e9099 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_CN/userspace-api/accelerators/ocxl.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_CN/userspace-api/accelerators/ocxl.rst
@@ -53,7 +53,7 @@ OpenCAPI定义了一个在物理链路层上实现的数据链路层（TL）和
 
   Processor：处理器
   Memory：内存
-  Accelerated Function Unit：加速函数单元
+  Accelerated Function Unit：加速功能单元
 
 
 
@@ -97,7 +97,7 @@ OpenCAPI拥有AFU向主机进程发送中断的可能性。它通过定义在传
 ========
 
 驱动为每个在物理设备上发现的AFU创建一个字符设备。一个物理设备可能拥有多个
-函数，一个函数可以拥有多个AFU。不过编写这篇文档之时，只对导出一个AFU的设备
+功能，一个功能可以拥有多个AFU。不过编写这篇文档之时，只对导出一个AFU的设备
 测试过。
 
 字符设备可以在 /dev/ocxl/ 中被找到，其命名为：
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst
index 6dee719a32ea..7464279f9b7d 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst
@@ -344,7 +344,7 @@ debugfs接口
   :ref:`sysfs接口<sysfs_interface>`。
 
 DAMON導出了八個文件, ``attrs``, ``target_ids``, ``init_regions``,
-``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和
+``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和
 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
 
 
@@ -521,15 +521,15 @@ DAMON導出了八個文件, ``attrs``, ``target_ids``, ``init_regions``,
 開關
 ----
 
-除非你明確地啓動監測，否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on``
+除非你明確地啓動監測，否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on_DEPRECATED``
 文件來啓動、停止和檢查監測的當前狀態。寫入 ``on`` 該文件可以啓動對有屬性的目標的監測。寫入
 ``off`` 該文件則停止這些目標。如果每個目標進程被終止，DAMON也會停止。下面的示例命令開啓、關
 閉和檢查DAMON的狀態::
 
     # cd <debugfs>/damon
-    # echo on > monitor_on
-    # echo off > monitor_on
-    # cat monitor_on
+    # echo on > monitor_on_DEPRECATED
+    # echo off > monitor_on_DEPRECATED
+    # cat monitor_on_DEPRECATED
     off
 
 請注意，當監測開啓時，你不能寫到上述的debugfs文件。如果你在DAMON運行時寫到這些文件，將會返
@@ -543,11 +543,11 @@ DAMON通過一個叫做kdamond的內核線程來進行請求監測。你可以
 得該線程的 ``pid`` 。當監測被 ``關閉`` 時，讀取該文件不會返回任何信息::
 
     # cd <debugfs>/damon
-    # cat monitor_on
+    # cat monitor_on_DEPRECATED
     off
     # cat kdamond_pid
     none
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # cat kdamond_pid
     18594
 
@@ -574,7 +574,7 @@ DAMON通過一個叫做kdamond的內核線程來進行請求監測。你可以
     # ls foo
     # ls: cannot access 'foo': No such file or directory
 
-注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目錄下。
+注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目錄下。
 
 
 監測結果的監測點
@@ -583,10 +583,10 @@ DAMON通過一個叫做kdamond的內核線程來進行請求監測。你可以
 DAMON通過一個tracepoint ``damon:damon_aggregated`` 提供監測結果.  當監測開啓時，你可
 以記錄追蹤點事件，並使用追蹤點支持工具如perf顯示結果。比如說::
 
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # perf record -e damon:damon_aggregated &
     # sleep 5
     # kill 9 $(pidof perf)
-    # echo off > monitor_on
+    # echo off > monitor_on_DEPRECATED
     # perf script
 
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_TW/dev-tools/kasan.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/dev-tools/kasan.rst
index 979eb84bc58f..ed342e67d8ed 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_TW/dev-tools/kasan.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/dev-tools/kasan.rst
@@ -137,7 +137,7 @@ KASAN受到通用 ``panic_on_warn`` 命令行參數的影響。當它被啓用
 典型的KASAN報告如下所示::
 
     ==================================================================
-    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan]
+    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [kasan_test]
     Write of size 1 at addr ffff8801f44ec37b by task insmod/2760
 
     CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698
@@ -147,8 +147,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行參數的影響。當它被啓用
      print_address_description+0x73/0x280
      kasan_report+0x144/0x187
      __asan_report_store1_noabort+0x17/0x20
-     kmalloc_oob_right+0xa8/0xbc [test_kasan]
-     kmalloc_tests_init+0x16/0x700 [test_kasan]
+     kmalloc_oob_right+0xa8/0xbc [kasan_test]
+     kmalloc_tests_init+0x16/0x700 [kasan_test]
      do_one_initcall+0xa5/0x3ae
      do_init_module+0x1b6/0x547
      load_module+0x75df/0x8070
@@ -168,8 +168,8 @@ KASAN受到通用 ``panic_on_warn`` 命令行參數的影響。當它被啓用
      save_stack+0x43/0xd0
      kasan_kmalloc+0xa7/0xd0
      kmem_cache_alloc_trace+0xe1/0x1b0
-     kmalloc_oob_right+0x56/0xbc [test_kasan]
-     kmalloc_tests_init+0x16/0x700 [test_kasan]
+     kmalloc_oob_right+0x56/0xbc [kasan_test]
+     kmalloc_tests_init+0x16/0x700 [kasan_test]
      do_one_initcall+0xa5/0x3ae
      do_init_module+0x1b6/0x547
      load_module+0x75df/0x8070
@@ -421,15 +421,15 @@ KASAN連接到vmap基礎架構以懶清理未使用的影子內存。
 
 當由於 ``kmalloc`` 失敗而導致測試失敗時::
 
-        # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
+        # kmalloc_large_oob_right: ASSERTION FAILED at mm/kasan/kasan_test.c:245
         Expected ptr is not null, but is
-        not ok 4 - kmalloc_large_oob_right
+        not ok 5 - kmalloc_large_oob_right
 
 當由於缺少KASAN報告而導致測試失敗時::
 
-        # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974
+        # kmalloc_double_kzfree: EXPECTATION FAILED at mm/kasan/kasan_test.c:709
         KASAN failure expected in "kfree_sensitive(ptr)", but none occurred
-        not ok 44 - kmalloc_double_kzfree
+        not ok 28 - kmalloc_double_kzfree
 
 
 最後打印所有KASAN測試的累積狀態。成功::
@@ -445,7 +445,7 @@ KASAN連接到vmap基礎架構以懶清理未使用的影子內存。
 1. 可加載模塊
 
    啓用 ``CONFIG_KUNIT`` 後，KASAN-KUnit測試可以構建爲可加載模塊，並通過使用
-   ``insmod`` 或 ``modprobe`` 加載 ``test_kasan.ko`` 來運行。
+   ``insmod`` 或 ``modprobe`` 加載 ``kasan_test.ko`` 來運行。
 
 2. 內置
 
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/coding-style.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/process/coding-style.rst
index f11dbb65ca21..c7ac504f6f40 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/coding-style.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/process/coding-style.rst
@@ -526,9 +526,9 @@ Linux 裏這是提倡的做法，因爲這樣可以很簡單的給讀者提供
 
 .. code-block:: c
 
-	 err_free_bar:
+	err_free_bar:
 		kfree(foo->bar);
-	 err_free_foo:
+	err_free_foo:
 		kfree(foo);
 		return ret;
 
diff --git linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst
index 3cce7db2ab7e..93d21fd88910 100644
--- linux-libre-6.8-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/translations/zh_TW/process/embargoed-hardware-issues.rst
@@ -180,7 +180,7 @@ CVE分配
   AMD		Tom Lendacky <thomas.lendacky@amd.com>
   IBM
   Intel		Tony Luck <tony.luck@intel.com>
-  Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+  Qualcomm	Trilok Soni <quic_tsoni@quicinc.com>
 
   Microsoft	Sasha Levin <sashal@kernel.org>
   VMware
diff --git linux-libre-6.8-gnu/Documentation/usb/functionfs.rst linux-libre-6.9-rc6-gnu/Documentation/usb/functionfs.rst
index a3054bea38f3..d05a775bc45b 100644
--- linux-libre-6.8-gnu/Documentation/usb/functionfs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/usb/functionfs.rst
@@ -2,6 +2,9 @@
 How FunctionFS works
 ====================
 
+Overview
+========
+
 From kernel point of view it is just a composite function with some
 unique behaviour.  It may be added to an USB configuration only after
 the user space driver has registered by writing descriptors and
@@ -66,3 +69,36 @@ have been written to their ep0's.
 
 Conversely, the gadget is unregistered after the first USB function
 closes its endpoints.
+
+DMABUF interface
+================
+
+FunctionFS additionally supports a DMABUF based interface, where the
+userspace can attach DMABUF objects (externally created) to an endpoint,
+and subsequently use them for data transfers.
+
+A userspace application can then use this interface to share DMABUF
+objects between several interfaces, allowing it to transfer data in a
+zero-copy fashion, for instance between IIO and the USB stack.
+
+As part of this interface, three new IOCTLs have been added. These three
+IOCTLs have to be performed on a data endpoint (ie. not ep0). They are:
+
+  ``FUNCTIONFS_DMABUF_ATTACH(int)``
+    Attach the DMABUF object, identified by its file descriptor, to the
+    data endpoint. Returns zero on success, and a negative errno value
+    on error.
+
+  ``FUNCTIONFS_DMABUF_DETACH(int)``
+    Detach the given DMABUF object, identified by its file descriptor,
+    from the data endpoint. Returns zero on success, and a negative
+    errno value on error. Note that closing the endpoint's file
+    descriptor will automatically detach all attached DMABUFs.
+
+  ``FUNCTIONFS_DMABUF_TRANSFER(struct usb_ffs_dmabuf_transfer_req *)``
+    Enqueue the previously attached DMABUF to the transfer queue.
+    The argument is a structure that packs the DMABUF's file descriptor,
+    the size in bytes to transfer (which should generally correspond to
+    the size of the DMABUF), and a 'flags' field which is unused
+    for now. Returns zero on success, and a negative errno value on
+    error.
diff --git linux-libre-6.8-gnu/Documentation/usb/gadget-testing.rst linux-libre-6.9-rc6-gnu/Documentation/usb/gadget-testing.rst
index 077dfac7ed98..b086c7ab72f0 100644
--- linux-libre-6.8-gnu/Documentation/usb/gadget-testing.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/usb/gadget-testing.rst
@@ -206,6 +206,14 @@ the standard procedure for using FunctionFS (mount it, run the userspace
 process which implements the function proper). The gadget should be enabled
 by writing a suitable string to usb_gadget/<gadget>/UDC.
 
+The FFS function provides just one attribute in its function directory:
+
+	ready
+
+The attribute is read-only and signals if the function is ready (1) to be
+used, E.G. if userspace has written descriptors and strings to ep0, so
+the gadget can be enabled.
+
 Testing the FFS function
 ------------------------
 
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/chardev.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/chardev.rst
new file mode 100644
index 000000000000..c58dd9771ac9
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/chardev.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+GPIO Character Device Userspace API
+===================================
+
+This is latest version (v2) of the character device API, as defined in
+``include/uapi/linux/gpio.h.``
+
+First added in 5.10.
+
+.. note::
+   Do NOT abuse userspace APIs to control hardware that has proper kernel
+   drivers. There may already be a driver for your use case, and an existing
+   kernel driver is sure to provide a superior solution to bitbashing
+   from userspace.
+
+   Read Documentation/driver-api/gpio/drivers-on-gpio.rst to avoid reinventing
+   kernel wheels in userspace.
+
+   Similarly, for multi-function lines there may be other subsystems, such as
+   Documentation/spi/index.rst, Documentation/i2c/index.rst,
+   Documentation/driver-api/pwm.rst, Documentation/w1/index.rst etc, that
+   provide suitable drivers and APIs for your hardware.
+
+Basic examples using the character device API can be found in ``tools/gpio/*``.
+
+The API is based around two major objects, the :ref:`gpio-v2-chip` and the
+:ref:`gpio-v2-line-request`.
+
+.. _gpio-v2-chip:
+
+Chip
+====
+
+The Chip represents a single GPIO chip and is exposed to userspace using device
+files of the form ``/dev/gpiochipX``.
+
+Each chip supports a number of GPIO lines,
+:c:type:`chip.lines<gpiochip_info>`. Lines on the chip are identified by an
+``offset`` in the range from 0 to ``chip.lines - 1``, i.e. `[0,chip.lines)`.
+
+Lines are requested from the chip using gpio-v2-get-line-ioctl.rst
+and the resulting line request is used to access the GPIO chip's lines or
+monitor the lines for edge events.
+
+Within this documentation, the file descriptor returned by calling `open()`
+on the GPIO device file is referred to as ``chip_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the chip:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line <gpio-v2-get-line-ioctl>
+   Get Chip Info <gpio-get-chipinfo-ioctl>
+   Get Line Info <gpio-v2-get-lineinfo-ioctl>
+   Watch Line Info <gpio-v2-get-lineinfo-watch-ioctl>
+   Unwatch Line Info <gpio-get-lineinfo-unwatch-ioctl>
+   Read Line Info Changed Events <gpio-v2-lineinfo-changed-read>
+
+.. _gpio-v2-line-request:
+
+Line Request
+============
+
+Line requests are created by gpio-v2-get-line-ioctl.rst and provide
+access to a set of requested lines.  The line request is exposed to userspace
+via the anonymous file descriptor returned in
+:c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+Within this documentation, the line request file descriptor is referred to
+as ``req_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the line request:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line Values <gpio-v2-line-get-values-ioctl>
+   Set Line Values <gpio-v2-line-set-values-ioctl>
+   Read Line Edge Events <gpio-v2-line-event-read>
+   Reconfigure Lines <gpio-v2-line-set-config-ioctl>
+
+Types
+=====
+
+This section contains the structs and enums that are referenced by the API v2,
+as defined in ``include/uapi/linux/gpio.h``.
+
+.. kernel-doc:: include/uapi/linux/gpio.h
+   :identifiers:
+    gpio_v2_line_attr_id
+    gpio_v2_line_attribute
+    gpio_v2_line_changed_type
+    gpio_v2_line_config
+    gpio_v2_line_config_attribute
+    gpio_v2_line_event
+    gpio_v2_line_event_id
+    gpio_v2_line_flag
+    gpio_v2_line_info
+    gpio_v2_line_info_changed
+    gpio_v2_line_request
+    gpio_v2_line_values
+    gpiochip_info
+
+.. toctree::
+   :hidden:
+
+   error-codes
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/chardev_v1.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/chardev_v1.rst
new file mode 100644
index 000000000000..67124b1d0487
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/chardev_v1.rst
@@ -0,0 +1,131 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+GPIO Character Device Userspace API (v1)
+========================================
+
+.. warning::
+   This API is obsoleted by chardev.rst (v2).
+
+   New developments should use the v2 API, and existing developments are
+   encouraged to migrate as soon as possible, as this API will be removed
+   in the future. The v2 API is a functional superset of the v1 API so any
+   v1 call can be directly translated to a v2 equivalent.
+
+   This interface will continue to be maintained for the migration period,
+   but new features will only be added to the new API.
+
+First added in 4.8.
+
+The API is based around three major objects, the :ref:`gpio-v1-chip`, the
+:ref:`gpio-v1-line-handle`, and the :ref:`gpio-v1-line-event`.
+
+Where "line event" is used in this document it refers to the request that can
+monitor a line for edge events, not the edge events themselves.
+
+.. _gpio-v1-chip:
+
+Chip
+====
+
+The Chip represents a single GPIO chip and is exposed to userspace using device
+files of the form ``/dev/gpiochipX``.
+
+Each chip supports a number of GPIO lines,
+:c:type:`chip.lines<gpiochip_info>`. Lines on the chip are identified by an
+``offset`` in the range from 0 to ``chip.lines - 1``, i.e. `[0,chip.lines)`.
+
+Lines are requested from the chip using either gpio-get-linehandle-ioctl.rst
+and the resulting line handle is used to access the GPIO chip's lines, or
+gpio-get-lineevent-ioctl.rst and the resulting line event is used to monitor
+a GPIO line for edge events.
+
+Within this documentation, the file descriptor returned by calling `open()`
+on the GPIO device file is referred to as ``chip_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the chip:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line Handle <gpio-get-linehandle-ioctl>
+   Get Line Event <gpio-get-lineevent-ioctl>
+   Get Chip Info <gpio-get-chipinfo-ioctl>
+   Get Line Info <gpio-get-lineinfo-ioctl>
+   Watch Line Info <gpio-get-lineinfo-watch-ioctl>
+   Unwatch Line Info <gpio-get-lineinfo-unwatch-ioctl>
+   Read Line Info Changed Events <gpio-lineinfo-changed-read>
+
+.. _gpio-v1-line-handle:
+
+Line Handle
+===========
+
+Line handles are created by gpio-get-linehandle-ioctl.rst and provide
+access to a set of requested lines.  The line handle is exposed to userspace
+via the anonymous file descriptor returned  in
+:c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst.
+
+Within this documentation, the line handle file descriptor is referred to
+as ``handle_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the line handle:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line Values <gpio-handle-get-line-values-ioctl>
+   Set Line Values <gpio-handle-set-line-values-ioctl>
+   Reconfigure Lines <gpio-handle-set-config-ioctl>
+
+.. _gpio-v1-line-event:
+
+Line Event
+==========
+
+Line events are created by gpio-get-lineevent-ioctl.rst and provide
+access to a requested line.  The line event is exposed to userspace
+via the anonymous file descriptor returned  in
+:c:type:`request.fd<gpioevent_request>` by gpio-get-lineevent-ioctl.rst.
+
+Within this documentation, the line event file descriptor is referred to
+as ``event_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the line event:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line Value <gpio-handle-get-line-values-ioctl>
+   Read Line Edge Events <gpio-lineevent-data-read>
+
+Types
+=====
+
+This section contains the structs that are referenced by the ABI v1.
+
+The :c:type:`struct gpiochip_info<gpiochip_info>` is common to ABI v1 and v2.
+
+.. kernel-doc:: include/uapi/linux/gpio.h
+   :identifiers:
+    gpioevent_data
+    gpioevent_request
+    gpiohandle_config
+    gpiohandle_data
+    gpiohandle_request
+    gpioline_info
+    gpioline_info_changed
+
+.. toctree::
+   :hidden:
+
+   error-codes
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/error-codes.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/error-codes.rst
new file mode 100644
index 000000000000..6bf2948990cd
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/error-codes.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _gpio_errors:
+
+*******************
+GPIO Error Codes
+*******************
+
+.. _gpio-errors:
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table:: Common GPIO error codes
+    :header-rows:  0
+    :stub-columns: 0
+    :widths: 1 16
+
+    -  -  ``EAGAIN`` (aka ``EWOULDBLOCK``)
+
+       -  The device was opened in non-blocking mode and a read can't
+          be performed as there is no data available.
+
+    -  -  ``EBADF``
+
+       -  The file descriptor is not valid.
+
+    -  -  ``EBUSY``
+
+       -  The ioctl can't be handled because the device is busy. Typically
+          returned when an ioctl attempts something that would require the
+          usage of a resource that was already allocated. The ioctl must not
+          be retried without performing another action to fix the problem
+          first.
+
+    -  -  ``EFAULT``
+
+       -  There was a failure while copying data from/to userspace, probably
+	  caused by an invalid pointer reference.
+
+    -  -  ``EINVAL``
+
+       -  One or more of the ioctl parameters are invalid or out of the
+          allowed range. This is a widely used error code.
+
+    -  -  ``ENODEV``
+
+       -  Device not found or was removed.
+
+    -  -  ``ENOMEM``
+
+       -  There's not enough memory to handle the desired operation.
+
+    -  -  ``EPERM``
+
+       -  Permission denied. Typically returned in response to an attempt
+          to perform an action incompatible with the current line
+          configuration.
+
+    -  -  ``EIO``
+
+       -  I/O error. Typically returned when there are problems communicating
+          with a hardware device or requesting features that hardware does not
+          support. This could indicate broken or flaky hardware.
+          It's a 'Something is wrong, I give up!' type of error.
+
+    -  - ``ENXIO``
+
+       -  Typically returned when a feature requiring interrupt support was
+          requested, but the line does not support interrupts.
+
+.. note::
+
+  #. This list is not exhaustive; ioctls may return other error codes.
+     Since errors may have side effects such as a driver reset,
+     applications should abort on unexpected errors, or otherwise
+     assume that the device is in a bad state.
+
+  #. Request-specific error codes are listed in the individual
+     requests descriptions.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-get-chipinfo-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-chipinfo-ioctl.rst
new file mode 100644
index 000000000000..05f07fdefe2f
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-chipinfo-ioctl.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_GET_CHIPINFO_IOCTL:
+
+***********************
+GPIO_GET_CHIPINFO_IOCTL
+***********************
+
+Name
+====
+
+GPIO_GET_CHIPINFO_IOCTL - Get the publicly available information for a chip.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_GET_CHIPINFO_IOCTL
+
+``int ioctl(int chip_fd, GPIO_GET_CHIPINFO_IOCTL, struct gpiochip_info *info)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``info``
+    The :c:type:`chip_info<gpiochip_info>` to be populated.
+
+Description
+===========
+
+Gets the publicly available information for a particular GPIO chip.
+
+Return Value
+============
+
+On success 0 and ``info`` is populated with the chip info.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-get-lineevent-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineevent-ioctl.rst
new file mode 100644
index 000000000000..09a9254f38cf
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineevent-ioctl.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_GET_LINEEVENT_IOCTL:
+
+************************
+GPIO_GET_LINEEVENT_IOCTL
+************************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-get-line-ioctl.rst.
+
+Name
+====
+
+GPIO_GET_LINEEVENT_IOCTL - Request a line with edge detection from the kernel.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_GET_LINEEVENT_IOCTL
+
+``int ioctl(int chip_fd, GPIO_GET_LINEEVENT_IOCTL, struct gpioevent_request *request)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``request``
+    The :c:type:`event_request<gpioevent_request>` specifying the line
+    to request and its configuration.
+
+Description
+===========
+
+Request a line with edge detection from the kernel.
+
+On success, the requesting process is granted exclusive access to the line
+value and may receive events when edges are detected on the line, as
+described in gpio-lineevent-data-read.rst.
+
+The state of a line is guaranteed to remain as requested until the returned
+file descriptor is closed. Once the file descriptor is closed, the state of
+the line becomes uncontrolled from the userspace perspective, and may revert
+to its default state.
+
+Requesting a line already in use is an error (**EBUSY**).
+
+Requesting edge detection on a line that does not support interrupts is an
+error (**ENXIO**).
+
+As with the :ref:`line handle<gpio-get-linehandle-config-support>`, the
+bias configuration is best effort.
+
+Closing the ``chip_fd`` has no effect on existing line events.
+
+Configuration Rules
+-------------------
+
+The following configuration rules apply:
+
+The line event is requested as an input, so no flags specific to output lines,
+``GPIOHANDLE_REQUEST_OUTPUT``, ``GPIOHANDLE_REQUEST_OPEN_DRAIN``, or
+``GPIOHANDLE_REQUEST_OPEN_SOURCE``, may be set.
+
+Only one bias flag, ``GPIOHANDLE_REQUEST_BIAS_xxx``, may be set.
+If no bias flags are set then the bias configuration is not changed.
+
+The edge flags, ``GPIOEVENT_REQUEST_RISING_EDGE`` and
+``GPIOEVENT_REQUEST_FALLING_EDGE``, may be combined to detect both rising
+and falling edges.
+
+Requesting an invalid configuration is an error (**EINVAL**).
+
+Return Value
+============
+
+On success 0 and the :c:type:`request.fd<gpioevent_request>` contains the file
+descriptor for the request.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-get-linehandle-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-linehandle-ioctl.rst
new file mode 100644
index 000000000000..9112a9d31174
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-linehandle-ioctl.rst
@@ -0,0 +1,125 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_GET_LINEHANDLE_IOCTL:
+
+*************************
+GPIO_GET_LINEHANDLE_IOCTL
+*************************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-get-line-ioctl.rst.
+
+Name
+====
+
+GPIO_GET_LINEHANDLE_IOCTL - Request a line or lines from the kernel.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_GET_LINEHANDLE_IOCTL
+
+``int ioctl(int chip_fd, GPIO_GET_LINEHANDLE_IOCTL, struct gpiohandle_request *request)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``request``
+    The :c:type:`handle_request<gpiohandle_request>` specifying the lines to
+    request and their configuration.
+
+Description
+===========
+
+Request a line or lines from the kernel.
+
+While multiple lines may be requested, the same configuration applies to all
+lines in the request.
+
+On success, the requesting process is granted exclusive access to the line
+value and write access to the line configuration.
+
+The state of a line, including the value of output lines, is guaranteed to
+remain as requested until the returned file descriptor is closed. Once the
+file descriptor is closed, the state of the line becomes uncontrolled from
+the userspace perspective, and may revert to its default state.
+
+Requesting a line already in use is an error (**EBUSY**).
+
+Closing the ``chip_fd`` has no effect on existing line handles.
+
+.. _gpio-get-linehandle-config-rules:
+
+Configuration Rules
+-------------------
+
+The following configuration rules apply:
+
+The direction flags, ``GPIOHANDLE_REQUEST_INPUT`` and
+``GPIOHANDLE_REQUEST_OUTPUT``, cannot be combined. If neither are set then the
+only other flag that may be set is ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` and the
+line is requested "as-is" to allow reading of the line value without altering
+the electrical configuration.
+
+The drive flags, ``GPIOHANDLE_REQUEST_OPEN_xxx``, require the
+``GPIOHANDLE_REQUEST_OUTPUT`` to be set.
+Only one drive flag may be set.
+If none are set then the line is assumed push-pull.
+
+Only one bias flag, ``GPIOHANDLE_REQUEST_BIAS_xxx``, may be set, and
+it requires a direction flag to also be set.
+If no bias flags are set then the bias configuration is not changed.
+
+Requesting an invalid configuration is an error (**EINVAL**).
+
+
+.. _gpio-get-linehandle-config-support:
+
+Configuration Support
+---------------------
+
+Where the requested configuration is not directly supported by the underlying
+hardware and driver, the kernel applies one of these approaches:
+
+ - reject the request
+ - emulate the feature in software
+ - treat the feature as best effort
+
+The approach applied depends on whether the feature can reasonably be emulated
+in software, and the impact on the hardware and userspace if the feature is not
+supported.
+The approach applied for each feature is as follows:
+
+==============   ===========
+Feature          Approach
+==============   ===========
+Bias             best effort
+Direction        reject
+Drive            emulate
+==============   ===========
+
+Bias is treated as best effort to allow userspace to apply the same
+configuration for platforms that support internal bias as those that require
+external bias.
+Worst case the line floats rather than being biased as expected.
+
+Drive is emulated by switching the line to an input when the line should not
+be driven.
+
+In all cases, the configuration reported by gpio-get-lineinfo-ioctl.rst
+is the requested configuration, not the resulting hardware configuration.
+Userspace cannot determine if a feature is supported in hardware, is
+emulated, or is best effort.
+
+Return Value
+============
+
+On success 0 and the :c:type:`request.fd<gpiohandle_request>` contains the
+file descriptor for the request.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-ioctl.rst
new file mode 100644
index 000000000000..c895b8910b25
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-ioctl.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_GET_LINEINFO_IOCTL:
+
+***********************
+GPIO_GET_LINEINFO_IOCTL
+***********************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-get-lineinfo-ioctl.rst.
+
+Name
+====
+
+GPIO_GET_LINEINFO_IOCTL - Get the publicly available information for a line.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_GET_LINEINFO_IOCTL
+
+``int ioctl(int chip_fd, GPIO_GET_LINEINFO_IOCTL, struct gpioline_info *info)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``info``
+    The :c:type:`line_info<gpioline_info>` to be populated, with the
+    ``offset`` field set to indicate the line to be collected.
+
+Description
+===========
+
+Get the publicly available information for a line.
+
+This information is available independent of whether the line is in use.
+
+.. note::
+    The line info does not include the line value.
+
+    The line must be requested using gpio-get-linehandle-ioctl.rst or
+    gpio-get-lineevent-ioctl.rst to access its value.
+
+Return Value
+============
+
+On success 0 and ``info`` is populated with the chip info.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-unwatch-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-unwatch-ioctl.rst
new file mode 100644
index 000000000000..a82d0161daf8
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-unwatch-ioctl.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_GET_LINEINFO_UNWATCH_IOCTL:
+
+*******************************
+GPIO_GET_LINEINFO_UNWATCH_IOCTL
+*******************************
+
+Name
+====
+
+GPIO_GET_LINEINFO_UNWATCH_IOCTL - Disable watching a line for changes to its
+requested state and configuration information.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_GET_LINEINFO_UNWATCH_IOCTL
+
+``int ioctl(int chip_fd, GPIO_GET_LINEINFO_UNWATCH_IOCTL, u32 *offset)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``offset``
+    The offset of the line to no longer watch.
+
+Description
+===========
+
+Remove the line from the list of lines being watched on this ``chip_fd``.
+
+This is the reverse of gpio-v2-get-lineinfo-watch-ioctl.rst (v2) and
+gpio-get-lineinfo-watch-ioctl.rst (v1).
+
+Unwatching a line that is not watched is an error (**EBUSY**).
+
+First added in 5.7.
+
+Return Value
+============
+
+On success 0.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-watch-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-watch-ioctl.rst
new file mode 100644
index 000000000000..f5c92b69a496
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-get-lineinfo-watch-ioctl.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_GET_LINEINFO_WATCH_IOCTL:
+
+*****************************
+GPIO_GET_LINEINFO_WATCH_IOCTL
+*****************************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-get-lineinfo-watch-ioctl.rst.
+
+Name
+====
+
+GPIO_GET_LINEINFO_WATCH_IOCTL - Enable watching a line for changes to its
+request state and configuration information.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_GET_LINEINFO_WATCH_IOCTL
+
+``int ioctl(int chip_fd, GPIO_GET_LINEINFO_WATCH_IOCTL, struct gpioline_info *info)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``info``
+    The :c:type:`line_info<gpioline_info>` struct to be populated, with
+    the ``offset`` set to indicate the line to watch
+
+Description
+===========
+
+Enable watching a line for changes to its request state and configuration
+information. Changes to line info include a line being requested, released
+or reconfigured.
+
+.. note::
+    Watching line info is not generally required, and would typically only be
+    used by a system monitoring component.
+
+    The line info does NOT include the line value.
+
+    The line must be requested using gpio-get-linehandle-ioctl.rst or
+    gpio-get-lineevent-ioctl.rst to access its value, and the line event can
+    monitor a line for events using gpio-lineevent-data-read.rst.
+
+By default all lines are unwatched when the GPIO chip is opened.
+
+Multiple lines may be watched simultaneously by adding a watch for each.
+
+Once a watch is set, any changes to line info will generate events which can be
+read from the ``chip_fd`` as described in
+gpio-lineinfo-changed-read.rst.
+
+Adding a watch to a line that is already watched is an error (**EBUSY**).
+
+Watches are specific to the ``chip_fd`` and are independent of watches
+on the same GPIO chip opened with a separate call to `open()`.
+
+First added in 5.7.
+
+Return Value
+============
+
+On success 0 and ``info`` is populated with the current line info.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst
new file mode 100644
index 000000000000..25263b8f0588
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIOHANDLE_GET_LINE_VALUES_IOCTL:
+
+********************************
+GPIOHANDLE_GET_LINE_VALUES_IOCTL
+********************************
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-line-get-values-ioctl.rst.
+
+Name
+====
+
+GPIOHANDLE_GET_LINE_VALUES_IOCTL - Get the values of all requested lines.
+
+Synopsis
+========
+
+.. c:macro:: GPIOHANDLE_GET_LINE_VALUES_IOCTL
+
+``int ioctl(int handle_fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, struct gpiohandle_data *values)``
+
+Arguments
+=========
+
+``handle_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst.
+
+``values``
+    The :c:type:`line_values<gpiohandle_data>` to be populated.
+
+Description
+===========
+
+Get the values of all requested lines.
+
+The values of both input and output lines may be read.
+
+For output lines, the value returned is driver and configuration dependent and
+may be either the output buffer (the last requested value set) or the input
+buffer (the actual level of the line), and depending on the hardware and
+configuration these may differ.
+
+This ioctl can also be used to read the line value for line events,
+substituting the ``event_fd`` for the ``handle_fd``.  As there is only
+one line requested in that case, only the one value is returned in ``values``.
+
+Return Value
+============
+
+On success 0 and ``values`` populated with the values read.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst
new file mode 100644
index 000000000000..d002a84681ac
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst
@@ -0,0 +1,63 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIOHANDLE_SET_CONFIG_IOCTL:
+
+***************************
+GPIOHANDLE_SET_CONFIG_IOCTL
+***************************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-line-set-config-ioctl.rst.
+
+Name
+====
+
+GPIOHANDLE_SET_CONFIG_IOCTL - Update the configuration of previously requested lines.
+
+Synopsis
+========
+
+.. c:macro:: GPIOHANDLE_SET_CONFIG_IOCTL
+
+``int ioctl(int handle_fd, GPIOHANDLE_SET_CONFIG_IOCTL, struct gpiohandle_config *config)``
+
+Arguments
+=========
+
+``handle_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst.
+
+``config``
+    The new :c:type:`configuration<gpiohandle_config>` to apply to the
+    requested lines.
+
+Description
+===========
+
+Update the configuration of previously requested lines, without releasing the
+line or introducing potential glitches.
+
+The configuration applies to all requested lines.
+
+The same :ref:`gpio-get-linehandle-config-rules` and
+:ref:`gpio-get-linehandle-config-support` that apply when requesting the
+lines also apply when updating the line configuration.
+
+The motivating use case for this command is changing direction of
+bi-directional lines between input and output, but it may be used more
+generally to move lines seamlessly from one configuration state to another.
+
+To only change the value of output lines, use
+gpio-handle-set-line-values-ioctl.rst.
+
+First added in 5.5.
+
+Return Value
+============
+
+On success 0.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst
new file mode 100644
index 000000000000..0aa05e623a6c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst
@@ -0,0 +1,48 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_HANDLE_SET_LINE_VALUES_IOCTL:
+
+*********************************
+GPIO_HANDLE_SET_LINE_VALUES_IOCTL
+*********************************
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-line-set-values-ioctl.rst.
+
+Name
+====
+
+GPIO_HANDLE_SET_LINE_VALUES_IOCTL - Set the values of all requested output lines.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_HANDLE_SET_LINE_VALUES_IOCTL
+
+``int ioctl(int handle_fd, GPIO_HANDLE_SET_LINE_VALUES_IOCTL, struct gpiohandle_data *values)``
+
+Arguments
+=========
+
+``handle_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpiohandle_request>` by gpio-get-linehandle-ioctl.rst.
+
+``values``
+    The :c:type:`line_values<gpiohandle_data>` to set.
+
+Description
+===========
+
+Set the values of all requested output lines.
+
+Only the values of output lines may be set.
+Attempting to set the value of input lines is an error (**EPERM**).
+
+Return Value
+============
+
+On success 0.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst
new file mode 100644
index 000000000000..68b8d4f9f604
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_LINEEVENT_DATA_READ:
+
+************************
+GPIO_LINEEVENT_DATA_READ
+************************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-line-event-read.rst.
+
+Name
+====
+
+GPIO_LINEEVENT_DATA_READ - Read edge detection events from a line event.
+
+Synopsis
+========
+
+``int read(int event_fd, void *buf, size_t count)``
+
+Arguments
+=========
+
+``event_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpioevent_request>` by gpio-get-lineevent-ioctl.rst.
+
+``buf``
+    The buffer to contain the :c:type:`events<gpioevent_data>`.
+
+``count``
+    The number of bytes available in ``buf``, which must be at
+    least the size of a :c:type:`gpioevent_data`.
+
+Description
+===========
+
+Read edge detection events for a line from a line event.
+
+Edge detection must be enabled for the input line using either
+``GPIOEVENT_REQUEST_RISING_EDGE`` or ``GPIOEVENT_REQUEST_FALLING_EDGE``, or
+both. Edge events are then generated whenever edge interrupts are detected on
+the input line.
+
+The kernel captures and timestamps edge events as close as possible to their
+occurrence and stores them in a buffer from where they can be read by
+userspace at its convenience using `read()`.
+
+The source of the clock for :c:type:`event.timestamp<gpioevent_data>` is
+``CLOCK_MONOTONIC``, except for kernels earlier than Linux 5.7 when it was
+``CLOCK_REALTIME``.  There is no indication in the :c:type:`gpioevent_data`
+as to which clock source is used, it must be determined from either the kernel
+version or sanity checks on the timestamp itself.
+
+Events read from the buffer are always in the same order that they were
+detected by the kernel.
+
+The size of the kernel event buffer is fixed at 16 events.
+
+The buffer may overflow if bursts of events occur quicker than they are read
+by userspace. If an overflow occurs then the most recent event is discarded.
+Overflow cannot be detected from userspace.
+
+To minimize the number of calls required to copy events from the kernel to
+userspace, `read()` supports copying multiple events. The number of events
+copied is the lower of the number available in the kernel buffer and the
+number that will fit in the userspace buffer (``buf``).
+
+The `read()` will block if no event is available and the ``event_fd`` has not
+been set **O_NONBLOCK**.
+
+The presence of an event can be tested for by checking that the ``event_fd`` is
+readable using `poll()` or an equivalent.
+
+Return Value
+============
+
+On success the number of bytes read, which will be a multiple of the size of
+a :c:type:`gpio_lineevent_data` event.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-lineinfo-changed-read.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-lineinfo-changed-read.rst
new file mode 100644
index 000000000000..c4f5e1787a9d
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-lineinfo-changed-read.rst
@@ -0,0 +1,87 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_LINEINFO_CHANGED_READ:
+
+**************************
+GPIO_LINEINFO_CHANGED_READ
+**************************
+
+.. warning::
+    This ioctl is part of chardev_v1.rst and is obsoleted by
+    gpio-v2-lineinfo-changed-read.rst.
+
+Name
+====
+
+GPIO_LINEINFO_CHANGED_READ - Read line info change events for watched lines
+from the chip.
+
+Synopsis
+========
+
+``int read(int chip_fd, void *buf, size_t count)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``buf``
+    The buffer to contain the :c:type:`events<gpioline_info_changed>`.
+
+``count``
+    The number of bytes available in ``buf``, which must be at least the size
+    of a :c:type:`gpioline_info_changed` event.
+
+Description
+===========
+
+Read line info change events for watched lines from the chip.
+
+.. note::
+    Monitoring line info changes is not generally required, and would typically
+    only be performed by a system monitoring component.
+
+    These events relate to changes in a line's request state or configuration,
+    not its value. Use gpio-lineevent-data-read.rst to receive events when a
+    line changes value.
+
+A line must be watched using gpio-get-lineinfo-watch-ioctl.rst to generate
+info changed events.  Subsequently, a request, release, or reconfiguration
+of the line will generate an info changed event.
+
+The kernel timestamps events when they occur and stores them in a buffer
+from where they can be read by userspace at its convenience using `read()`.
+
+The size of the kernel event buffer is fixed at 32 events per ``chip_fd``.
+
+The buffer may overflow if bursts of events occur quicker than they are read
+by userspace. If an overflow occurs then the most recent event is discarded.
+Overflow cannot be detected from userspace.
+
+Events read from the buffer are always in the same order that they were
+detected by the kernel, including when multiple lines are being monitored by
+the one ``chip_fd``.
+
+To minimize the number of calls required to copy events from the kernel to
+userspace, `read()` supports copying multiple events. The number of events
+copied is the lower of the number available in the kernel buffer and the
+number that will fit in the userspace buffer (``buf``).
+
+A `read()` will block if no event is available and the ``chip_fd`` has not
+been set **O_NONBLOCK**.
+
+The presence of an event can be tested for by checking that the ``chip_fd`` is
+readable using `poll()` or an equivalent.
+
+First added in 5.7.
+
+Return Value
+============
+
+On success the number of bytes read, which will be a multiple of the size of
+a :c:type:`gpioline_info_changed` event.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
new file mode 100644
index 000000000000..56b975801b6a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-get-line-ioctl.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_GET_LINE_IOCTL:
+
+**********************
+GPIO_V2_GET_LINE_IOCTL
+**********************
+
+Name
+====
+
+GPIO_V2_GET_LINE_IOCTL - Request a line or lines from the kernel.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_GET_LINE_IOCTL
+
+``int ioctl(int chip_fd, GPIO_V2_GET_LINE_IOCTL, struct gpio_v2_line_request *request)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``request``
+    The :c:type:`line_request<gpio_v2_line_request>` specifying the lines
+    to request and their configuration.
+
+Description
+===========
+
+On success, the requesting process is granted exclusive access to the line
+value, write access to the line configuration, and may receive events when
+edges are detected on the line, all of which are described in more detail in
+:ref:`gpio-v2-line-request`.
+
+A number of lines may be requested in the one line request, and request
+operations are performed on the requested lines by the kernel as atomically
+as possible. e.g. gpio-v2-line-get-values-ioctl.rst will read all the
+requested lines at once.
+
+The state of a line, including the value of output lines, is guaranteed to
+remain as requested until the returned file descriptor is closed. Once the
+file descriptor is closed, the state of the line becomes uncontrolled from
+the userspace perspective, and may revert to its default state.
+
+Requesting a line already in use is an error (**EBUSY**).
+
+Closing the ``chip_fd`` has no effect on existing line requests.
+
+.. _gpio-v2-get-line-config-rules:
+
+Configuration Rules
+-------------------
+
+For any given requested line, the following configuration rules apply:
+
+The direction flags, ``GPIO_V2_LINE_FLAG_INPUT`` and
+``GPIO_V2_LINE_FLAG_OUTPUT``, cannot be combined. If neither are set then
+the only other flag that may be set is ``GPIO_V2_LINE_FLAG_ACTIVE_LOW``
+and the line is requested "as-is" to allow reading of the line value
+without altering the electrical configuration.
+
+The drive flags, ``GPIO_V2_LINE_FLAG_OPEN_xxx``, require the
+``GPIO_V2_LINE_FLAG_OUTPUT`` to be set.
+Only one drive flag may be set.
+If none are set then the line is assumed push-pull.
+
+Only one bias flag, ``GPIO_V2_LINE_FLAG_BIAS_xxx``, may be set, and it
+requires a direction flag to also be set.
+If no bias flags are set then the bias configuration is not changed.
+
+The edge flags, ``GPIO_V2_LINE_FLAG_EDGE_xxx``, require
+``GPIO_V2_LINE_FLAG_INPUT`` to be set and may be combined to detect both rising
+and falling edges.  Requesting edge detection from a line that does not support
+it is an error (**ENXIO**).
+
+Only one event clock flag, ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_xxx``, may be set.
+If none are set then the event clock defaults to ``CLOCK_MONOTONIC``.
+The ``GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE`` flag requires supporting hardware
+and a kernel with ``CONFIG_HTE`` set.  Requesting HTE from a device that
+doesn't support it is an error (**EOPNOTSUP**).
+
+The :c:type:`debounce_period_us<gpio_v2_line_attribute>` attribute may only
+be applied to lines with ``GPIO_V2_LINE_FLAG_INPUT`` set. When set, debounce
+applies to both the values returned by gpio-v2-line-get-values-ioctl.rst and
+the edges returned by gpio-v2-line-event-read.rst.  If not
+supported directly by hardware, debouncing is emulated in software by the
+kernel.  Requesting debounce on a line that supports neither debounce in
+hardware nor interrupts, as required for software emulation, is an error
+(**ENXIO**).
+
+Requesting an invalid configuration is an error (**EINVAL**).
+
+.. _gpio-v2-get-line-config-support:
+
+Configuration Support
+---------------------
+
+Where the requested configuration is not directly supported by the underlying
+hardware and driver, the kernel applies one of these approaches:
+
+ - reject the request
+ - emulate the feature in software
+ - treat the feature as best effort
+
+The approach applied depends on whether the feature can reasonably be emulated
+in software, and the impact on the hardware and userspace if the feature is not
+supported.
+The approach applied for each feature is as follows:
+
+==============   ===========
+Feature          Approach
+==============   ===========
+Bias             best effort
+Debounce         emulate
+Direction        reject
+Drive            emulate
+Edge Detection   reject
+==============   ===========
+
+Bias is treated as best effort to allow userspace to apply the same
+configuration for platforms that support internal bias as those that require
+external bias.
+Worst case the line floats rather than being biased as expected.
+
+Debounce is emulated by applying a filter to hardware interrupts on the line.
+An edge event is generated after an edge is detected and the line remains
+stable for the debounce period.
+The event timestamp corresponds to the end of the debounce period.
+
+Drive is emulated by switching the line to an input when the line should not
+be actively driven.
+
+Edge detection requires interrupt support, and is rejected if that is not
+supported. Emulation by polling can still be performed from userspace.
+
+In all cases, the configuration reported by gpio-v2-get-lineinfo-ioctl.rst
+is the requested configuration, not the resulting hardware configuration.
+Userspace cannot determine if a feature is supported in hardware, is
+emulated, or is best effort.
+
+Return Value
+============
+
+On success 0 and the :c:type:`request.fd<gpio_v2_line_request>` contains the
+file descriptor for the request.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-ioctl.rst
new file mode 100644
index 000000000000..bc4d8df887d4
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-ioctl.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_GET_LINEINFO_IOCTL:
+
+**************************
+GPIO_V2_GET_LINEINFO_IOCTL
+**************************
+
+Name
+====
+
+GPIO_V2_GET_LINEINFO_IOCTL - Get the publicly available information for a line.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_GET_LINEINFO_IOCTL
+
+``int ioctl(int chip_fd, GPIO_V2_GET_LINEINFO_IOCTL, struct gpio_v2_line_info *info)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``info``
+    The :c:type:`line_info<gpio_v2_line_info>` to be populated, with the
+    ``offset`` field set to indicate the line to be collected.
+
+Description
+===========
+
+Get the publicly available information for a line.
+
+This information is available independent of whether the line is in use.
+
+.. note::
+    The line info does not include the line value.
+
+    The line must be requested using gpio-v2-get-line-ioctl.rst to access its
+    value.
+
+Return Value
+============
+
+On success 0 and ``info`` is populated with the chip info.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-watch-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-watch-ioctl.rst
new file mode 100644
index 000000000000..938ff85a9322
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-get-lineinfo-watch-ioctl.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_GET_LINEINFO_WATCH_IOCTL:
+
+********************************
+GPIO_V2_GET_LINEINFO_WATCH_IOCTL
+********************************
+
+Name
+====
+
+GPIO_V2_GET_LINEINFO_WATCH_IOCTL - Enable watching a line for changes to its
+request state and configuration information.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_GET_LINEINFO_WATCH_IOCTL
+
+``int ioctl(int chip_fd, GPIO_V2_GET_LINEINFO_WATCH_IOCTL, struct gpio_v2_line_info *info)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``info``
+    The :c:type:`line_info<gpio_v2_line_info>` struct to be populated, with
+    the ``offset`` set to indicate the line to watch
+
+Description
+===========
+
+Enable watching a line for changes to its request state and configuration
+information. Changes to line info include a line being requested, released
+or reconfigured.
+
+.. note::
+    Watching line info is not generally required, and would typically only be
+    used by a system monitoring component.
+
+    The line info does NOT include the line value.
+    The line must be requested using gpio-v2-get-line-ioctl.rst to access
+    its value, and the line request can monitor a line for events using
+    gpio-v2-line-event-read.rst.
+
+By default all lines are unwatched when the GPIO chip is opened.
+
+Multiple lines may be watched simultaneously by adding a watch for each.
+
+Once a watch is set, any changes to line info will generate events which can be
+read from the ``chip_fd`` as described in
+gpio-v2-lineinfo-changed-read.rst.
+
+Adding a watch to a line that is already watched is an error (**EBUSY**).
+
+Watches are specific to the ``chip_fd`` and are independent of watches
+on the same GPIO chip opened with a separate call to `open()`.
+
+Return Value
+============
+
+On success 0 and ``info`` is populated with the current line info.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst
new file mode 100644
index 000000000000..6513c23fb7ca
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst
@@ -0,0 +1,83 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_LINE_EVENT_READ:
+
+***********************
+GPIO_V2_LINE_EVENT_READ
+***********************
+
+Name
+====
+
+GPIO_V2_LINE_EVENT_READ - Read edge detection events for lines from a request.
+
+Synopsis
+========
+
+``int read(int req_fd, void *buf, size_t count)``
+
+Arguments
+=========
+
+``req_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+``buf``
+    The buffer to contain the :c:type:`events<gpio_v2_line_event>`.
+
+``count``
+    The number of bytes available in ``buf``, which must be at
+    least the size of a :c:type:`gpio_v2_line_event`.
+
+Description
+===========
+
+Read edge detection events for lines from a request.
+
+Edge detection must be enabled for the input line using either
+``GPIO_V2_LINE_FLAG_EDGE_RISING`` or ``GPIO_V2_LINE_FLAG_EDGE_FALLING``, or
+both. Edge events are then generated whenever edge interrupts are detected on
+the input line.
+
+The kernel captures and timestamps edge events as close as possible to their
+occurrence and stores them in a buffer from where they can be read by
+userspace at its convenience using `read()`.
+
+Events read from the buffer are always in the same order that they were
+detected by the kernel, including when multiple lines are being monitored by
+the one request.
+
+The size of the kernel event buffer is fixed at the time of line request
+creation, and can be influenced by the
+:c:type:`request.event_buffer_size<gpio_v2_line_request>`.
+The default size is 16 times the number of lines requested.
+
+The buffer may overflow if bursts of events occur quicker than they are read
+by userspace. If an overflow occurs then the oldest buffered event is
+discarded. Overflow can be detected from userspace by monitoring the event
+sequence numbers.
+
+To minimize the number of calls required to copy events from the kernel to
+userspace, `read()` supports copying multiple events. The number of events
+copied is the lower of the number available in the kernel buffer and the
+number that will fit in the userspace buffer (``buf``).
+
+Changing the edge detection flags using gpio-v2-line-set-config-ioctl.rst
+does not remove or modify the events already contained in the kernel event
+buffer.
+
+The `read()` will block if no event is available and the ``req_fd`` has not
+been set **O_NONBLOCK**.
+
+The presence of an event can be tested for by checking that the ``req_fd`` is
+readable using `poll()` or an equivalent.
+
+Return Value
+============
+
+On success the number of bytes read, which will be a multiple of the size of a
+:c:type:`gpio_v2_line_event` event.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst
new file mode 100644
index 000000000000..e4e74a1926d8
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_LINE_GET_VALUES_IOCTL:
+
+*****************************
+GPIO_V2_LINE_GET_VALUES_IOCTL
+*****************************
+
+Name
+====
+
+GPIO_V2_LINE_GET_VALUES_IOCTL - Get the values of requested lines.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_LINE_GET_VALUES_IOCTL
+
+``int ioctl(int req_fd, GPIO_V2_LINE_GET_VALUES_IOCTL, struct gpio_v2_line_values *values)``
+
+Arguments
+=========
+
+``req_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+``values``
+    The :c:type:`line_values<gpio_v2_line_values>` to get with the ``mask`` set
+    to indicate the subset of requested lines to get.
+
+Description
+===========
+
+Get the values of requested lines.
+
+The values of both input and output lines may be read.
+
+For output lines, the value returned is driver and configuration dependent and
+may be either the output buffer (the last requested value set) or the input
+buffer (the actual level of the line), and depending on the hardware and
+configuration these may differ.
+
+Return Value
+============
+
+On success 0 and the corresponding :c:type:`values.bits<gpio_v2_line_values>`
+contain the value read.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst
new file mode 100644
index 000000000000..9b942a8a53ca
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst
@@ -0,0 +1,58 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_LINE_SET_CONFIG_IOCTL:
+
+*****************************
+GPIO_V2_LINE_SET_CONFIG_IOCTL
+*****************************
+
+Name
+====
+
+GPIO_V2_LINE_SET_CONFIG_IOCTL - Update the configuration of previously requested lines.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_LINE_SET_CONFIG_IOCTL
+
+``int ioctl(int req_fd, GPIO_V2_LINE_SET_CONFIG_IOCTL, struct gpio_v2_line_config *config)``
+
+Arguments
+=========
+
+``req_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+``config``
+    The new :c:type:`configuration<gpio_v2_line_config>` to apply to the
+    requested lines.
+
+Description
+===========
+
+Update the configuration of previously requested lines, without releasing the
+line or introducing potential glitches.
+
+The new configuration must specify the configuration of all requested lines.
+
+The same :ref:`gpio-v2-get-line-config-rules` and
+:ref:`gpio-v2-get-line-config-support` that apply when requesting the lines
+also apply when updating the line configuration.
+
+The motivating use case for this command is changing direction of
+bi-directional lines between input and output, but it may also be used to
+dynamically control edge detection, or more generally move lines seamlessly
+from one configuration state to another.
+
+To only change the value of output lines, use
+gpio-v2-line-set-values-ioctl.rst.
+
+Return Value
+============
+
+On success 0.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst
new file mode 100644
index 000000000000..6d2d1886950b
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_LINE_SET_VALUES_IOCTL:
+
+*****************************
+GPIO_V2_LINE_SET_VALUES_IOCTL
+*****************************
+
+Name
+====
+
+GPIO_V2_LINE_SET_VALUES_IOCTL - Set the values of requested output lines.
+
+Synopsis
+========
+
+.. c:macro:: GPIO_V2_LINE_SET_VALUES_IOCTL
+
+``int ioctl(int req_fd, GPIO_V2_LINE_SET_VALUES_IOCTL, struct gpio_v2_line_values *values)``
+
+Arguments
+=========
+
+``req_fd``
+    The file descriptor of the GPIO character device, as returned in the
+    :c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+``values``
+    The :c:type:`line_values<gpio_v2_line_values>` to set with the ``mask`` set
+    to indicate the subset of requested lines to set and ``bits`` set to
+    indicate the new value.
+
+Description
+===========
+
+Set the values of requested output lines.
+
+Only the values of output lines may be set.
+Attempting to set the value of an input line is an error (**EPERM**).
+
+Return Value
+============
+
+On success 0.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/gpio-v2-lineinfo-changed-read.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-lineinfo-changed-read.rst
new file mode 100644
index 000000000000..24ad325e7253
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/gpio-v2-lineinfo-changed-read.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _GPIO_V2_LINEINFO_CHANGED_READ:
+
+*****************************
+GPIO_V2_LINEINFO_CHANGED_READ
+*****************************
+
+Name
+====
+
+GPIO_V2_LINEINFO_CHANGED_READ - Read line info changed events for watched
+lines from the chip.
+
+Synopsis
+========
+
+``int read(int chip_fd, void *buf, size_t count)``
+
+Arguments
+=========
+
+``chip_fd``
+    The file descriptor of the GPIO character device returned by `open()`.
+
+``buf``
+    The buffer to contain the :c:type:`events<gpio_v2_line_info_changed>`.
+
+``count``
+    The number of bytes available in ``buf``, which must be at least the size
+    of a :c:type:`gpio_v2_line_info_changed` event.
+
+Description
+===========
+
+Read line info changed events for watched lines from the chip.
+
+.. note::
+    Monitoring line info changes is not generally required, and would typically
+    only be performed by a system monitoring component.
+
+    These events relate to changes in a line's request state or configuration,
+    not its value. Use gpio-v2-line-event-read.rst to receive events when a
+    line changes value.
+
+A line must be watched using gpio-v2-get-lineinfo-watch-ioctl.rst to generate
+info changed events.  Subsequently, a request, release, or reconfiguration
+of the line will generate an info changed event.
+
+The kernel timestamps events when they occur and stores them in a buffer
+from where they can be read by userspace at its convenience using `read()`.
+
+The size of the kernel event buffer is fixed at 32 events per ``chip_fd``.
+
+The buffer may overflow if bursts of events occur quicker than they are read
+by userspace. If an overflow occurs then the most recent event is discarded.
+Overflow cannot be detected from userspace.
+
+Events read from the buffer are always in the same order that they were
+detected by the kernel, including when multiple lines are being monitored by
+the one ``chip_fd``.
+
+To minimize the number of calls required to copy events from the kernel to
+userspace, `read()` supports copying multiple events. The number of events
+copied is the lower of the number available in the kernel buffer and the
+number that will fit in the userspace buffer (``buf``).
+
+A `read()` will block if no event is available and the ``chip_fd`` has not
+been set **O_NONBLOCK**.
+
+The presence of an event can be tested for by checking that the ``chip_fd`` is
+readable using `poll()` or an equivalent.
+
+Return Value
+============
+
+On success the number of bytes read, which will be a multiple of the size
+of a :c:type:`gpio_v2_line_info_changed` event.
+
+On error -1 and the ``errno`` variable is set appropriately.
+Common error codes are described in error-codes.rst.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/index.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/index.rst
new file mode 100644
index 000000000000..f258de4ef370
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+GPIO
+====
+
+.. toctree::
+    :maxdepth: 1
+
+    Character Device Userspace API <chardev>
+    Obsolete Userspace APIs <obsolete>
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/gpio/obsolete.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/obsolete.rst
new file mode 100644
index 000000000000..c42538b44ec8
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/obsolete.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Obsolete GPIO Userspace APIs
+============================
+
+.. toctree::
+    :maxdepth: 1
+
+    Character Device Userspace API (v1) <chardev_v1>
+    Sysfs Interface <sysfs>
diff --git linux-libre-6.8-gnu/Documentation/admin-guide/gpio/sysfs.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/sysfs.rst
similarity index 87%
rename from Documentation/admin-guide/gpio/sysfs.rst
rename to Documentation/userspace-api/gpio/sysfs.rst
index 35171d15f78d..116921048b18 100644
--- linux-libre-6.8-gnu/Documentation/admin-guide/gpio/sysfs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/gpio/sysfs.rst
@@ -2,18 +2,18 @@ GPIO Sysfs Interface for Userspace
 ==================================
 
 .. warning::
+   This API is obsoleted by the chardev.rst and the ABI documentation has
+   been moved to Documentation/ABI/obsolete/sysfs-gpio.
 
-  THIS ABI IS DEPRECATED, THE ABI DOCUMENTATION HAS BEEN MOVED TO
-  Documentation/ABI/obsolete/sysfs-gpio AND NEW USERSPACE CONSUMERS
-  ARE SUPPOSED TO USE THE CHARACTER DEVICE ABI. THIS OLD SYSFS ABI WILL
-  NOT BE DEVELOPED (NO NEW FEATURES), IT WILL JUST BE MAINTAINED.
+   New developments should use the chardev.rst, and existing developments are
+   encouraged to migrate as soon as possible, as this API will be removed
+   in the future.
 
-Refer to the examples in tools/gpio/* for an introduction to the new
-character device ABI. Also see the userspace header in
-include/uapi/linux/gpio.h
+   This interface will continue to be maintained for the migration period,
+   but new features will only be added to the new API.
 
-The deprecated sysfs ABI
-------------------------
+The obsolete sysfs ABI
+----------------------
 Platforms which use the "gpiolib" implementors framework may choose to
 configure a sysfs user interface to GPIOs. This is different from the
 debugfs interface, since it provides control over GPIO direction and
@@ -33,9 +33,12 @@ userspace GPIO can be used to determine system configuration data that
 standard kernels won't know about. And for some tasks, simple userspace
 GPIO drivers could be all that the system really needs.
 
-DO NOT ABUSE SYSFS TO CONTROL HARDWARE THAT HAS PROPER KERNEL DRIVERS.
-PLEASE READ THE DOCUMENT AT Documentation/driver-api/gpio/drivers-on-gpio.rst
-TO AVOID REINVENTING KERNEL WHEELS IN USERSPACE. I MEAN IT. REALLY.
+.. note::
+   Do NOT abuse sysfs to control hardware that has proper kernel drivers.
+   Please read Documentation/driver-api/gpio/drivers-on-gpio.rst
+   to avoid reinventing kernel wheels in userspace.
+
+   I MEAN IT. REALLY.
 
 Paths in Sysfs
 --------------
@@ -84,9 +87,9 @@ and have the following read/write attributes:
 		allow userspace to reconfigure this GPIO's direction.
 
 	"value" ...
-		reads as either 0 (low) or 1 (high). If the GPIO
+		reads as either 0 (inactive) or 1 (active). If the GPIO
 		is configured as an output, this value may be written;
-		any nonzero value is treated as high.
+		any nonzero value is treated as active.
 
 		If the pin can be configured as interrupt-generating interrupt
 		and if it has been configured to generate interrupts (see the
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/index.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/index.rst
index 09f61bd2ac2e..afecfe3cc4a8 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/index.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/index.rst
@@ -9,31 +9,59 @@ While much of the kernel's user-space API is documented elsewhere
 also be found in the kernel tree itself.  This manual is intended to be the
 place where this information is gathered.
 
+
+System calls
+============
+
+.. toctree::
+   :maxdepth: 1
+
+   unshare
+   futex2
+   ebpf/index
+   ioctl/index
+
+Security-related interfaces
+===========================
+
 .. toctree::
-   :caption: Table of contents
-   :maxdepth: 2
+   :maxdepth: 1
 
    no_new_privs
    seccomp_filter
    landlock
-   unshare
+   lsm
    spec_ctrl
+   tee
+
+Devices and I/O
+===============
+
+.. toctree::
+   :maxdepth: 1
+
    accelerators/ocxl
    dma-buf-alloc-exchange
-   ebpf/index
-   ELF
-   ioctl/index
+   gpio/index
    iommu
    iommufd
    media/index
+   dcdbas
+   vduse
+   isapnp
+
+Everything else
+===============
+
+.. toctree::
+   :maxdepth: 1
+
+   ELF
    netlink/index
    sysfs-platform_profile
    vduse
    futex2
-   lsm
-   tee
-   isapnp
-   dcdbas
+   perf_ring_buffer
 
 .. only::  subproject and html
 
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 457e16f06e04..c472423412bf 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -82,8 +82,9 @@ Code  Seq#    Include File                                           Comments
 0x10  00-0F  drivers/char/s390/vmcp.h
 0x10  10-1F  arch/s390/include/uapi/sclp_ctl.h
 0x10  20-2F  arch/s390/include/uapi/asm/hypfs.h
-0x12  all    linux/fs.h
+0x12  all    linux/fs.h                                              BLK* ioctls
              linux/blkpg.h
+0x15  all    linux/fs.h                                              FS_IOC_* ioctls
 0x1b  all                                                            InfiniBand Subsystem
                                                                      <http://infiniband.sourceforge.net/>
 0x20  all    drivers/cdrom/cm206.h
@@ -309,6 +310,7 @@ Code  Seq#    Include File                                           Comments
 0x89  0B-DF  linux/sockios.h
 0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
 0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
+0x8A  00-1F  linux/eventpoll.h
 0x8B  all    linux/wireless.h
 0x8C  00-3F                                                          WiNRADiO driver
                                                                      <http://www.winradio.com.au/>
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/landlock.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/landlock.rst
index 2e3822677061..9dd636aaa829 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/landlock.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/landlock.rst
@@ -19,11 +19,12 @@ unexpected/malicious behaviors in user space applications.  Landlock empowers
 any process, including unprivileged ones, to securely restrict themselves.
 
 We can quickly make sure that Landlock is enabled in the running system by
-looking for "landlock: Up and running" in kernel logs (as root): ``dmesg | grep
-landlock || journalctl -kg landlock`` .  Developers can also easily check for
-Landlock support with a :ref:`related system call <landlock_abi_versions>`.  If
-Landlock is not currently supported, we need to :ref:`configure the kernel
-appropriately <kernel_support>`.
+looking for "landlock: Up and running" in kernel logs (as root):
+``dmesg | grep landlock || journalctl -kb -g landlock`` .
+Developers can also easily check for Landlock support with a
+:ref:`related system call <landlock_abi_versions>`.
+If Landlock is not currently supported, we need to
+:ref:`configure the kernel appropriately <kernel_support>`.
 
 Landlock rules
 ==============
@@ -499,6 +500,9 @@ access rights.
 Kernel support
 ==============
 
+Build time configuration
+------------------------
+
 Landlock was first introduced in Linux 5.13 but it must be configured at build
 time with ``CONFIG_SECURITY_LANDLOCK=y``.  Landlock must also be enabled at boot
 time as the other security modules.  The list of security modules enabled by
@@ -507,11 +511,52 @@ contains ``CONFIG_LSM=landlock,[...]`` with ``[...]``  as the list of other
 potentially useful security modules for the running system (see the
 ``CONFIG_LSM`` help).
 
+Boot time configuration
+-----------------------
+
 If the running kernel does not have ``landlock`` in ``CONFIG_LSM``, then we can
-still enable it by adding ``lsm=landlock,[...]`` to
-Documentation/admin-guide/kernel-parameters.rst thanks to the bootloader
+enable Landlock by adding ``lsm=landlock,[...]`` to
+Documentation/admin-guide/kernel-parameters.rst in the boot loader
 configuration.
 
+For example, if the current built-in configuration is:
+
+.. code-block:: console
+
+    $ zgrep -h "^CONFIG_LSM=" "/boot/config-$(uname -r)" /proc/config.gz 2>/dev/null
+    CONFIG_LSM="lockdown,yama,integrity,apparmor"
+
+...and if the cmdline doesn't contain ``landlock`` either:
+
+.. code-block:: console
+
+    $ sed -n 's/.*\(\<lsm=\S\+\).*/\1/p' /proc/cmdline
+    lsm=lockdown,yama,integrity,apparmor
+
+...we should configure the boot loader to set a cmdline extending the ``lsm``
+list with the ``landlock,`` prefix::
+
+  lsm=landlock,lockdown,yama,integrity,apparmor
+
+After a reboot, we can check that Landlock is up and running by looking at
+kernel logs:
+
+.. code-block:: console
+
+    # dmesg | grep landlock || journalctl -kb -g landlock
+    [    0.000000] Command line: [...] lsm=landlock,lockdown,yama,integrity,apparmor
+    [    0.000000] Kernel command line: [...] lsm=landlock,lockdown,yama,integrity,apparmor
+    [    0.000000] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor
+    [    0.000000] landlock: Up and running.
+
+The kernel may be configured at build time to always load the ``lockdown`` and
+``capability`` LSMs.  In that case, these LSMs will appear at the beginning of
+the ``LSM: initializing`` log line as well, even if they are not configured in
+the boot loader.
+
+Network support
+---------------
+
 To be able to explicitly allow TCP operations (e.g., adding a network rule with
 ``LANDLOCK_ACCESS_NET_BIND_TCP``), the kernel must support TCP
 (``CONFIG_INET=y``).  Otherwise, sys_landlock_add_rule() returns an
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/drivers/ccs.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/drivers/ccs.rst
index 161cb65f4d98..03015b33d5ab 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/media/drivers/ccs.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/drivers/ccs.rst
@@ -2,6 +2,8 @@
 
 .. include:: <isonum.txt>
 
+.. _media-ccs-uapi:
+
 MIPI CCS camera sensor driver
 =============================
 
@@ -13,6 +15,8 @@ the binner and the scaler.
 As the capabilities of individual devices vary, the driver exposes
 interfaces based on the capabilities that exist in hardware.
 
+Also see :ref:`the CCS driver kernel documentation <media-ccs-driver>`.
+
 Pixel Array sub-device
 ----------------------
 
@@ -30,7 +34,7 @@ that purpose, selection target ``V4L2_SEL_TGT_COMPOSE`` is supported on the
 sink pad (0).
 
 Additionally, if a device has no scaler or digital crop functionality, the
-source pad (1) expses another digital crop selection rectangle that can only
+source pad (1) exposes another digital crop selection rectangle that can only
 crop at the end of the lines and frames.
 
 Scaler
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
index b97d56ee543c..ffe8325749e5 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
@@ -23,3 +23,4 @@ DVB-S2, DVB-T2, ISDB, etc.
     :maxdepth: 1
 
     frontend_legacy_dvbv3_api
+    legacy_dvb_decoder_api
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst
new file mode 100644
index 000000000000..b46fe2becd02
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst
@@ -0,0 +1,1642 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0
+
+.. c:namespace:: dtv.legacy.audio
+
+.. _dvb_audio:
+
+================
+DVB Audio Device
+================
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+The DVB audio device controls the MPEG2 audio decoder of the DVB
+hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
+types and ioctl definitions can be accessed by including
+``linux/dvb/audio.h`` in your application.
+
+Please note that most DVB cards don’t have their own MPEG decoder, which
+results in the omission of the audio and video device.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality. Use :ref:`V4L2 ioctls<audio>` for new drivers!
+
+
+Audio Data Types
+================
+
+This section describes the structures, data types and defines used when
+talking to the audio device.
+
+
+-----
+
+
+audio_stream_source_t
+---------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:enum:: audio_stream_source_t
+
+.. code-block:: c
+
+    typedef enum {
+    AUDIO_SOURCE_DEMUX,
+    AUDIO_SOURCE_MEMORY
+    } audio_stream_source_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``AUDIO_SOURCE_DEMUX``
+
+       -  :cspan:`1` Selects the demultiplexer (fed either by the frontend
+          or the DVR device) as the source of the video stream.
+
+    -  ..
+
+       -  ``AUDIO_SOURCE_MEMORY``
+
+       -  Selects the stream from the application that comes through
+          the `write()`_ system call.
+
+Description
+~~~~~~~~~~~
+
+The audio stream source is set through the `AUDIO_SELECT_SOURCE`_ call
+and can take the following values, depending on whether we are replaying
+from an internal (demux) or external (user write) source.
+
+The data fed to the decoder is also controlled by the PID-filter.
+Output selection: :c:type:`dmx_output` ``DMX_OUT_DECODER``.
+
+
+-----
+
+
+audio_play_state_t
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:enum:: audio_play_state_t
+
+.. code-block:: c
+
+    typedef enum {
+	AUDIO_STOPPED,
+	AUDIO_PLAYING,
+	AUDIO_PAUSED
+    } audio_play_state_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``AUDIO_STOPPED``
+
+       -  Audio is stopped.
+
+    -  ..
+
+       -  ``AUDIO_PLAYING``
+
+       -  Audio is currently playing.
+
+    -  ..
+
+       -  ``AUDIO_PAUSE``
+
+       -  Audio is frozen.
+
+Description
+~~~~~~~~~~~
+
+This values can be returned by the `AUDIO_GET_STATUS`_ call
+representing the state of audio playback.
+
+
+-----
+
+
+audio_channel_select_t
+----------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:enum:: audio_channel_select_t
+
+.. code-block:: c
+
+    typedef enum {
+	AUDIO_STEREO,
+	AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT,
+	AUDIO_MONO,
+	AUDIO_STEREO_SWAPPED
+    } audio_channel_select_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``AUDIO_STEREO``
+
+       -  Stereo.
+
+    -  ..
+
+       -  ``AUDIO_MONO_LEFT``
+
+       -  Mono, select left stereo channel as source.
+
+    -  ..
+
+       -  ``AUDIO_MONO_RIGHT``
+
+       -  Mono, select right stereo channel as source.
+
+    -  ..
+
+       -  ``AUDIO_MONO``
+
+       -  Mono source only.
+
+    -  ..
+
+       -  ``AUDIO_STEREO_SWAPPED``
+
+       -  Stereo, swap L & R.
+
+Description
+~~~~~~~~~~~
+
+The audio channel selected via `AUDIO_CHANNEL_SELECT`_ is determined by
+this values.
+
+
+-----
+
+
+audio_mixer_t
+-------------
+
+Synopsis
+~~~~~~~~
+
+.. c:struct:: audio_mixer
+
+.. code-block:: c
+
+    typedef struct audio_mixer {
+	unsigned int volume_left;
+	unsigned int volume_right;
+    } audio_mixer_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``unsigned int volume_left``
+
+       -  Volume left channel.
+          Valid range: 0 ... 255
+
+    -  ..
+
+       -  ``unsigned int volume_right``
+
+       -  Volume right channel.
+          Valid range: 0 ... 255
+
+Description
+~~~~~~~~~~~
+
+This structure is used by the `AUDIO_SET_MIXER`_ call to set the
+audio volume.
+
+
+-----
+
+
+audio_status
+------------
+
+Synopsis
+~~~~~~~~
+
+.. c:struct:: audio_status
+
+.. code-block:: c
+
+    typedef struct audio_status {
+	int AV_sync_state;
+	int mute_state;
+	audio_play_state_t play_state;
+	audio_stream_source_t stream_source;
+	audio_channel_select_t channel_select;
+	int bypass_mode;
+	audio_mixer_t mixer_state;
+    } audio_status_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  :rspan:`2` ``int AV_sync_state``
+
+       -  :cspan:`1` Shows if A/V synchronization is ON or OFF.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  AV-sync ON.
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  AV-sync OFF.
+
+    -  ..
+
+       -  :rspan:`2` ``int mute_state``
+
+       -  :cspan:`1` Indicates if audio is muted or not.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  mute audio
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  unmute audio
+
+    -  ..
+
+       -  `audio_play_state_t`_ ``play_state``
+
+       -  Current playback state.
+
+    -  ..
+
+       -  `audio_stream_source_t`_ ``stream_source``
+
+       -  Current source of the data.
+
+    -  ..
+
+       -  :rspan:`2` ``int bypass_mode``
+
+       -  :cspan:`1` Is the decoding of the current Audio stream in
+          the DVB subsystem enabled or disabled.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  Bypass disabled.
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  Bypass enabled.
+
+    -  ..
+
+       -  `audio_mixer_t`_ ``mixer_state``
+
+       -  Current volume settings.
+
+Description
+~~~~~~~~~~~
+
+The `AUDIO_GET_STATUS`_ call returns this structure as information
+about various states of the playback operation.
+
+
+-----
+
+
+audio encodings
+---------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+     #define AUDIO_CAP_DTS    1
+     #define AUDIO_CAP_LPCM   2
+     #define AUDIO_CAP_MP1    4
+     #define AUDIO_CAP_MP2    8
+     #define AUDIO_CAP_MP3   16
+     #define AUDIO_CAP_AAC   32
+     #define AUDIO_CAP_OGG   64
+     #define AUDIO_CAP_SDDS 128
+     #define AUDIO_CAP_AC3  256
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``AUDIO_CAP_DTS``
+
+       -  :cspan:`1` The hardware accepts DTS audio tracks.
+
+    -  ..
+
+       -  ``AUDIO_CAP_LPCM``
+
+       -   The hardware accepts uncompressed audio with
+           Linear Pulse-Code Modulation (LPCM)
+
+    -  ..
+
+       -  ``AUDIO_CAP_MP1``
+
+       -  The hardware accepts MPEG-1 Audio Layer 1.
+
+    -  ..
+
+       -  ``AUDIO_CAP_MP2``
+
+       -  The hardware accepts MPEG-1 Audio Layer 2.
+          Also known as MUSICAM.
+
+    -  ..
+
+       -  ``AUDIO_CAP_MP3``
+
+       -  The hardware accepts MPEG-1 Audio Layer III.
+          Commomly known as .mp3.
+
+    -  ..
+
+       -  ``AUDIO_CAP_AAC``
+
+       -  The hardware accepts AAC (Advanced Audio Coding).
+
+    -  ..
+
+       -  ``AUDIO_CAP_OGG``
+
+       -  The hardware accepts Vorbis audio tracks.
+
+    -  ..
+
+       -  ``AUDIO_CAP_SDDS``
+
+       -  The hardware accepts Sony Dynamic Digital Sound (SDDS).
+
+    -  ..
+
+       -  ``AUDIO_CAP_AC3``
+
+       -  The hardware accepts Dolby Digital ATSC A/52 audio.
+          Also known as AC-3.
+
+Description
+~~~~~~~~~~~
+
+A call to `AUDIO_GET_CAPABILITIES`_ returns an unsigned integer with the
+following bits set according to the hardwares capabilities.
+
+
+-----
+
+
+Audio Function Calls
+====================
+
+
+AUDIO_STOP
+----------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_STOP
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_STOP)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  File descriptor returned by a previous call to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``AUDIO_STOP`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to stop playing the current
+stream.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_PLAY
+----------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_PLAY
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_PLAY)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  File descriptor returned by a previous call to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``AUDIO_PLAY`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to start playing an audio stream
+from the selected source.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_PAUSE
+-----------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_PAUSE
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_PAUSE)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_PAUSE`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call suspends the audio stream being played. Decoding and
+playing are paused. It is then possible to restart again decoding and
+playing process of the audio stream using `AUDIO_CONTINUE`_ command.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_CONTINUE
+--------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_CONTINUE
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_CONTINUE)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_CONTINUE`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl restarts the decoding and playing process previously paused
+with `AUDIO_PAUSE`_ command.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SELECT_SOURCE
+-------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SELECT_SOURCE
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_SELECT_SOURCE,
+	 audio_stream_source_t source)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_SELECT_SOURCE`` for this command.
+
+    -  ..
+
+       -  `audio_stream_source_t`_ ``source``
+
+       -  Indicates the source that shall be used for the Audio stream.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call informs the audio device which source shall be used for
+the input data. The possible sources are demux or memory. If
+``AUDIO_SOURCE_MEMORY`` is selected, the data is fed to the Audio Device
+through the write command. If ``AUDIO_SOURCE_DEMUX`` is selected, the data
+is directly transferred from the onboard demux-device to the decoder.
+Note: This only supports DVB-devices with one demux and one decoder so far.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SET_MUTE
+--------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SET_MUTE
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_SET_MUTE, int state)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``AUDIO_SET_MUTE`` for this command.
+
+    -  ..
+
+       -  :rspan:`2` ``int state``
+
+       -  :cspan:`1` Indicates if audio device shall mute or not.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  mute audio
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  unmute audio
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` with the
+``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead.
+
+This ioctl call asks the audio device to mute the stream that is
+currently being played.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SET_AV_SYNC
+-----------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SET_AV_SYNC
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_SET_AV_SYNC, int state)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``AUDIO_AV_SYNC`` for this command.
+
+    -  ..
+
+       -  :rspan:`2` ``int state``
+
+       -  :cspan:`1` Tells the DVB subsystem if A/V synchronization
+          shall be ON or OFF.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  AV-sync ON.
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  AV-sync OFF.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to turn ON or OFF A/V
+synchronization.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SET_BYPASS_MODE
+---------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SET_BYPASS_MODE
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_SET_BYPASS_MODE, int mode)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``AUDIO_SET_BYPASS_MODE`` for this command.
+
+    -  ..
+
+       -  :rspan:`2` ``int mode``
+
+       -  :cspan:`1` Enables or disables the decoding of the current
+          Audio stream in the DVB subsystem.
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  Disable bypass
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  Enable bypass
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to bypass the Audio decoder and
+forward the stream without decoding. This mode shall be used if streams
+that can’t be handled by the DVB system shall be decoded. Dolby
+DigitalTM streams are automatically forwarded by the DVB subsystem if
+the hardware can handle it.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_CHANNEL_SELECT
+--------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_CHANNEL_SELECT
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_CHANNEL_SELECT,
+	 audio_channel_select_t)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_CHANNEL_SELECT`` for this command.
+
+    -  ..
+
+       -  `audio_channel_select_t`_ ``ch``
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead.
+
+This ioctl call asks the Audio Device to select the requested channel if
+possible.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_GET_STATUS
+----------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_GET_STATUS
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_GET_STATUS,
+	 struct audio_status *status)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals AUDIO_GET_STATUS for this command.
+
+    -  ..
+
+       -  ``struct`` `audio_status`_ ``*status``
+
+       -  Returns the current state of Audio Device.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to return the current state of the
+Audio Device.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_GET_CAPABILITIES
+----------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_GET_CAPABILITIES
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_GET_CAPABILITIES,
+	 unsigned int *cap)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_GET_CAPABILITIES`` for this command.
+
+    -  ..
+
+       -  ``unsigned int *cap``
+
+       -  Returns a bit array of supported sound formats.
+          Bits are defined in `audio encodings`_.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to tell us about the decoding
+capabilities of the audio hardware.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_CLEAR_BUFFER
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_CLEAR_BUFFER
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_CLEAR_BUFFER)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_CLEAR_BUFFER`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Audio Device to clear all software and hardware
+buffers of the audio decoder device.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SET_ID
+------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SET_ID
+
+.. code-block:: c
+
+	 int  ioctl(int fd, int request = AUDIO_SET_ID, int id)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_SET_ID`` for this command.
+
+    -  ..
+
+       -  ``int id``
+
+       -  Audio sub-stream id.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl selects which sub-stream is to be decoded if a program or
+system stream is sent to the video device.
+
+If no audio stream type is set the id has to be in range [0xC0,0xDF]
+for MPEG sound, in [0x80,0x87] for AC3 and in [0xA0,0xA7] for LPCM.
+See ITU-T H.222.0 | ISO/IEC 13818-1 for further description.
+
+If the stream type is set with `AUDIO_SET_STREAMTYPE`_, specifies the
+id just the sub-stream id of the audio stream and only the first 5 bits
+(& 0x1F) are recognized.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SET_MIXER
+---------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SET_MIXER
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_SET_MIXER, audio_mixer_t *mix)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_SET_MIXER`` for this command.
+
+    -  ..
+
+       -  ``audio_mixer_t *mix``
+
+       -  Mixer settings.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl lets you adjust the mixer settings of the audio decoder.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+AUDIO_SET_STREAMTYPE
+--------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_SET_STREAMTYPE
+
+.. code-block:: c
+
+	 int  ioctl(fd, int request = AUDIO_SET_STREAMTYPE, int type)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_SET_STREAMTYPE`` for this command.
+
+    -  ..
+
+       -  ``int type``
+
+       -  Stream type.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl tells the driver which kind of audio stream to expect. This
+is useful if the stream offers several audio sub-streams like LPCM and
+AC3.
+
+Stream types defined in ITU-T H.222.0 | ISO/IEC 13818-1 are used.
+
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EINVAL``
+
+       -  Type is not a valid or supported stream type.
+
+
+-----
+
+
+AUDIO_BILINGUAL_CHANNEL_SELECT
+------------------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: AUDIO_BILINGUAL_CHANNEL_SELECT
+
+.. code-block:: c
+
+	 int ioctl(int fd, int request = AUDIO_BILINGUAL_CHANNEL_SELECT,
+	 audio_channel_select_t)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``AUDIO_BILINGUAL_CHANNEL_SELECT`` for this command.
+
+    -  ..
+
+       -  ``audio_channel_select_t ch``
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl has been replaced by the V4L2
+``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control
+for MPEG decoders controlled through V4L2.
+
+This ioctl call asks the Audio Device to select the requested channel
+for bilingual streams if possible.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+open()
+------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+.. c:function:: int  open(const char *deviceName, int flags)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``const char *deviceName``
+
+       -  Name of specific audio device.
+
+    -  ..
+
+       -  :rspan:`3` ``int flags``
+
+       -  :cspan:`1` A bit-wise OR of the following flags:
+
+    -  ..
+
+       -  ``O_RDONLY``
+
+       -  read-only access
+
+    -  ..
+
+       -  ``O_RDWR``
+
+       -  read/write access
+
+    -  ..
+
+       -  ``O_NONBLOCK``
+       -  | Open in non-blocking mode
+          | (blocking mode is the default)
+
+Description
+~~~~~~~~~~~
+
+This system call opens a named audio device (e.g.
+``/dev/dvb/adapter0/audio0``) for subsequent use. When an open() call has
+succeeded, the device will be ready for use. The significance of
+blocking or non-blocking mode is described in the documentation for
+functions where there is a difference. It does not affect the semantics
+of the open() call itself. A device opened in blocking mode can later be
+put into non-blocking mode (and vice versa) using the F_SETFL command
+of the fcntl system call. This is a standard system call, documented in
+the Linux manual page for fcntl. Only one user can open the Audio Device
+in O_RDWR mode. All other attempts to open the device in this mode will
+fail, and an error code will be returned. If the Audio Device is opened
+in O_RDONLY mode, the only ioctl call that can be used is
+`AUDIO_GET_STATUS`_. All other call will return with an error code.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  ..
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  ..
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
+
+
+-----
+
+
+close()
+-------
+
+Synopsis
+~~~~~~~~
+
+.. c:function:: 	int close(int fd)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+Description
+~~~~~~~~~~~
+
+This system call closes a previously opened audio device.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EBADF``
+
+       -  Fd is not a valid open file descriptor.
+
+-----
+
+
+write()
+-------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+	 size_t write(int fd, const void *buf, size_t count)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``void *buf``
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  ..
+
+       -  ``size_t count``
+
+       -  Size of buf.
+
+Description
+~~~~~~~~~~~
+
+This system call can only be used if ``AUDIO_SOURCE_MEMORY`` is selected
+in the ioctl call `AUDIO_SELECT_SOURCE`_. The data provided shall be in
+PES format. If ``O_NONBLOCK`` is not specified the function will block
+until buffer space is available. The amount of data to be transferred is
+implied by count.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EPERM``
+
+       -  :cspan:`1` Mode ``AUDIO_SOURCE_MEMORY`` not selected.
+
+    -  ..
+
+       -  ``ENOMEM``
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  ..
+
+       -  ``EBADF``
+
+       -  Fd is not a valid open file descriptor.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_decoder_api.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_decoder_api.rst
new file mode 100644
index 000000000000..f58985a6e63c
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_decoder_api.rst
@@ -0,0 +1,61 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0
+
+.. _legacy_dvb_decoder_api:
+
+============================
+Legacy DVB MPEG Decoder APIs
+============================
+
+.. _legacy_dvb_decoder_notes:
+
+General Notes
+=============
+
+This API has originally been designed for DVB only and is therefore limited to
+the :ref:`legacy_dvb_decoder_formats` used in such digital TV-broadcastsystems.
+
+To circumvent this limitations the more versatile :ref:`V4L2 <v4l2spec>` API has
+been designed. Which replaces this part of the DVB API.
+
+Nevertheless there have been projects build around this API.
+To ensure compatibility this API is kept as it is.
+
+.. attention:: Do **not** use this API in new drivers!
+
+    For audio and video use the :ref:`V4L2 <v4l2spec>` and ALSA APIs.
+
+    Pipelines should be set up using the :ref:`Media Controller  API<media_controller>`.
+
+Practically the decoders seem to be treated differently. The application typically
+knows which decoder is in use or it is specially written for one decoder type.
+Querying capabilities are rarely used because they are already known.
+
+
+.. _legacy_dvb_decoder_formats:
+
+Data Formats
+============
+
+The API has been designed for DVB and compatible broadcastsystems.
+Because of that fact the only supported data formats are ISO/IEC 13818-1
+compatible MPEG streams. The supported payloads may vary depending on the
+used decoder.
+
+Timestamps are always MPEG PTS as defined in ITU T-REC-H.222.0 /
+ISO/IEC 13818-1, if not otherwise noted.
+
+For storing recordings typically TS streams are used, in lesser extent PES.
+Both variants are commonly accepted for playback, but it may be driver dependent.
+
+
+
+
+Table of Contents
+=================
+
+.. toctree::
+    :maxdepth: 2
+
+    legacy_dvb_video
+    legacy_dvb_audio
+    legacy_dvb_osd
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst
new file mode 100644
index 000000000000..179b66a8016a
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst
@@ -0,0 +1,883 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0
+
+.. c:namespace:: dtv.legacy.osd
+
+.. _dvb_osd:
+
+==============
+DVB OSD Device
+==============
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+The DVB OSD device controls the OnScreen-Display of the AV7110 based
+DVB-cards with hardware MPEG2 decoder. It can be accessed through
+``/dev/dvb/adapter?/osd0``.
+Data types and ioctl definitions can be accessed by including
+``linux/dvb/osd.h`` in your application.
+
+The OSD is not a frame-buffer like on many other cards.
+It is a kind of canvas one can draw on.
+The color-depth is limited depending on the memory size installed.
+An appropriate palette of colors has to be set up.
+The installed memory size can be identified with the `OSD_GET_CAPABILITY`_
+ioctl.
+
+OSD Data Types
+==============
+
+OSD_Command
+-----------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef enum {
+	/* All functions return -2 on "not open" */
+	OSD_Close = 1,
+	OSD_Open,
+	OSD_Show,
+	OSD_Hide,
+	OSD_Clear,
+	OSD_Fill,
+	OSD_SetColor,
+	OSD_SetPalette,
+	OSD_SetTrans,
+	OSD_SetPixel,
+	OSD_GetPixel,
+	OSD_SetRow,
+	OSD_SetBlock,
+	OSD_FillRow,
+	OSD_FillBlock,
+	OSD_Line,
+	OSD_Query,
+	OSD_Test,
+	OSD_Text,
+	OSD_SetWindow,
+	OSD_MoveWindow,
+	OSD_OpenRaw,
+    } OSD_Command;
+
+Commands
+~~~~~~~~
+
+.. note::  All functions return -2 on "not open"
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    -  ..
+
+       -  Command
+
+       -  | Used variables of ``struct`` `osd_cmd_t`_.
+          | Usage{variable} if alternative use.
+
+       -  :cspan:`2` Description
+
+
+
+    -  ..
+
+       -  ``OSD_Close``
+
+       -  -
+
+       -  | Disables OSD and releases the buffers.
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_Open``
+
+       -  | x0,y0,x1,y1,
+          | BitPerPixel[2/4/8]{color&0x0F},
+          | mix[0..15]{color&0xF0}
+
+       -  | Opens OSD with this size and bit depth
+          | Returns 0 on success,
+          | -1 on DRAM allocation error,
+          | -2 on "already open".
+
+    -  ..
+
+       -  ``OSD_Show``
+
+       - -
+
+       -  | Enables OSD mode.
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_Hide``
+
+       - -
+
+       -  | Disables OSD mode.
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_Clear``
+
+       - -
+
+       -  | Sets all pixel to color 0.
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_Fill``
+
+       -  color
+
+       -  | Sets all pixel to color <color>.
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_SetColor``
+
+       -  | color,
+          | R{x0},G{y0},B{x1},
+          | opacity{y1}
+
+       -  | Set palette entry <num> to <r,g,b>, <mix> and <trans> apply
+          | R,G,B: 0..255
+          | R=Red, G=Green, B=Blue
+          | opacity=0:      pixel opacity 0% (only video pixel shows)
+          | opacity=1..254: pixel opacity as specified in header
+          | opacity=255:    pixel opacity 100% (only OSD pixel shows)
+          | Returns 0 on success, -1 on error.
+
+    -  ..
+
+       -  ``OSD_SetPalette``
+
+       -  | firstcolor{color},
+          | lastcolor{x0},data
+
+       -  | Set a number of entries in the palette.
+          | Sets the entries "firstcolor" through "lastcolor" from the
+            array "data".
+          | Data has 4 byte for each color:
+          | R,G,B, and a opacity value: 0->transparent, 1..254->mix,
+            255->pixel
+
+    -  ..
+
+       -  ``OSD_SetTrans``
+
+       -  transparency{color}
+
+       -  | Sets transparency of mixed pixel (0..15).
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_SetPixel``
+
+       -  x0,y0,color
+
+       -  | Sets pixel <x>,<y> to color number <color>.
+          | Returns 0 on success, -1 on error.
+
+    -  ..
+
+       -  ``OSD_GetPixel``
+
+       -  x0,y0
+
+       -  | Returns color number of pixel <x>,<y>,  or -1.
+          | Command currently not supported by the AV7110!
+
+    -  ..
+
+       -  ``OSD_SetRow``
+
+       -  x0,y0,x1,data
+
+       -  | Fills pixels x0,y through  x1,y with the content of data[].
+          | Returns 0 on success, -1 on clipping all pixel (no pixel
+            drawn).
+
+    -  ..
+
+       -  ``OSD_SetBlock``
+
+       -  | x0,y0,x1,y1,
+          | increment{color},
+          | data
+
+       -  | Fills pixels x0,y0 through  x1,y1 with the content of data[].
+          | Inc contains the width of one line in the data block,
+          | inc<=0 uses block width as line width.
+          | Returns 0 on success, -1 on clipping all pixel.
+
+    -  ..
+
+       -  ``OSD_FillRow``
+
+       -  x0,y0,x1,color
+
+       -  | Fills pixels x0,y through  x1,y with the color <color>.
+          | Returns 0 on success, -1 on clipping all pixel.
+
+    -  ..
+
+       -  ``OSD_FillBlock``
+
+       -  x0,y0,x1,y1,color
+
+       -  | Fills pixels x0,y0 through  x1,y1 with the color <color>.
+          | Returns 0 on success, -1 on clipping all pixel.
+
+    -  ..
+
+       -  ``OSD_Line``
+
+       -  x0,y0,x1,y1,color
+
+       -  | Draw a line from x0,y0 to x1,y1 with the color <color>.
+          | Returns 0 on success.
+
+    -  ..
+
+       -  ``OSD_Query``
+
+       -  | x0,y0,x1,y1,
+          | xasp{color}; yasp=11
+
+       -  | Fills parameters with the picture dimensions and the pixel
+            aspect ratio.
+          | Returns 0 on success.
+          | Command currently not supported by the AV7110!
+
+    -  ..
+
+       -  ``OSD_Test``
+
+       -  -
+
+       -  | Draws a test picture.
+          | For debugging purposes only.
+          | Returns 0 on success.
+    -  ..
+
+       -  ``OSD_Text``
+
+       -  x0,y0,size,color,text
+
+       -  Draws a text at position x0,y0 with the color <color>.
+
+    -  ..
+
+       -  ``OSD_SetWindow``
+
+       -  x0
+
+       -  Set window with number 0<x0<8 as current.
+
+    -  ..
+
+       -  ``OSD_MoveWindow``
+
+       -  x0,y0
+
+       -  Move current window to (x0, y0).
+
+    -  ..
+
+       -  ``OSD_OpenRaw``
+
+       -  | x0,y0,x1,y1,
+          | `osd_raw_window_t`_ {color}
+
+       -  Open other types of OSD windows.
+
+Description
+~~~~~~~~~~~
+
+The ``OSD_Command`` data type is used with the `OSD_SEND_CMD`_ ioctl to
+tell the driver which OSD_Command to execute.
+
+
+-----
+
+osd_cmd_t
+---------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef struct osd_cmd_s {
+	OSD_Command cmd;
+	int x0;
+	int y0;
+	int x1;
+	int y1;
+	int color;
+	void __user *data;
+    } osd_cmd_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``OSD_Command cmd``
+
+       -  `OSD_Command`_ to be executed.
+
+    -  ..
+
+       -  ``int x0``
+
+       -  First horizontal position.
+
+    -  ..
+
+       -  ``int y0``
+
+       -  First vertical position.
+
+    -  ..
+
+       -  ``int x1``
+
+       -  Second horizontal position.
+
+    -  ..
+
+       -  ``int y1``
+
+       -  Second vertical position.
+
+    -  ..
+
+       -  ``int color``
+
+       -  Number of the color in the palette.
+
+    -  ..
+
+       -  ``void __user *data``
+
+       -  Command specific Data.
+
+Description
+~~~~~~~~~~~
+
+The ``osd_cmd_t`` data type is used with the `OSD_SEND_CMD`_ ioctl.
+It contains the data for the OSD_Command and the `OSD_Command`_ itself.
+The structure has to be passed to the driver and the components may be
+modified by it.
+
+
+-----
+
+
+osd_raw_window_t
+----------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef enum {
+	OSD_BITMAP1,
+	OSD_BITMAP2,
+	OSD_BITMAP4,
+	OSD_BITMAP8,
+	OSD_BITMAP1HR,
+	OSD_BITMAP2HR,
+	OSD_BITMAP4HR,
+	OSD_BITMAP8HR,
+	OSD_YCRCB422,
+	OSD_YCRCB444,
+	OSD_YCRCB444HR,
+	OSD_VIDEOTSIZE,
+	OSD_VIDEOHSIZE,
+	OSD_VIDEOQSIZE,
+	OSD_VIDEODSIZE,
+	OSD_VIDEOTHSIZE,
+	OSD_VIDEOTQSIZE,
+	OSD_VIDEOTDSIZE,
+	OSD_VIDEONSIZE,
+	OSD_CURSOR
+    } osd_raw_window_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``OSD_BITMAP1``
+
+       -  :cspan:`1` 1 bit bitmap
+
+    -  ..
+
+       -  ``OSD_BITMAP2``
+
+       -  2 bit bitmap
+
+    -  ..
+
+       -  ``OSD_BITMAP4``
+
+       -  4 bit bitmap
+
+    -  ..
+
+       -  ``OSD_BITMAP8``
+
+       -  8 bit bitmap
+
+    -  ..
+
+       -  ``OSD_BITMAP1HR``
+
+       -  1 Bit bitmap half resolution
+
+    -  ..
+
+       -  ``OSD_BITMAP2HR``
+
+       -  2 Bit bitmap half resolution
+
+    -  ..
+
+       -  ``OSD_BITMAP4HR``
+
+       -  4 Bit bitmap half resolution
+
+    -  ..
+
+       -  ``OSD_BITMAP8HR``
+
+       -  8 Bit bitmap half resolution
+
+    -  ..
+
+       -  ``OSD_YCRCB422``
+
+       -  4:2:2 YCRCB Graphic Display
+
+    -  ..
+
+       -  ``OSD_YCRCB444``
+
+       -  4:4:4 YCRCB Graphic Display
+
+    -  ..
+
+       -  ``OSD_YCRCB444HR``
+
+       -  4:4:4 YCRCB graphic half resolution
+
+    -  ..
+
+       -  ``OSD_VIDEOTSIZE``
+
+       -  True Size Normal MPEG Video Display
+
+    -  ..
+
+       -  ``OSD_VIDEOHSIZE``
+
+       -  MPEG Video Display Half Resolution
+
+    -  ..
+
+       -  ``OSD_VIDEOQSIZE``
+
+       -  MPEG Video Display Quarter Resolution
+
+    -  ..
+
+       -  ``OSD_VIDEODSIZE``
+
+       -  MPEG Video Display Double Resolution
+
+    -  ..
+
+       -  ``OSD_VIDEOTHSIZE``
+
+       -  True Size MPEG Video Display Half Resolution
+
+    -  ..
+
+       -  ``OSD_VIDEOTQSIZE``
+
+       -  True Size MPEG Video Display Quarter Resolution
+
+    -  ..
+
+       -  ``OSD_VIDEOTDSIZE``
+
+       -  True Size MPEG Video Display Double Resolution
+
+    -  ..
+
+       -  ``OSD_VIDEONSIZE``
+
+       -  Full Size MPEG Video Display
+
+    -  ..
+
+       -  ``OSD_CURSOR``
+
+       -  Cursor
+
+Description
+~~~~~~~~~~~
+
+The ``osd_raw_window_t`` data type is used with the `OSD_Command`_
+OSD_OpenRaw to tell the driver which type of OSD to open.
+
+
+-----
+
+
+osd_cap_t
+---------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef struct osd_cap_s {
+	int  cmd;
+    #define OSD_CAP_MEMSIZE         1
+	long val;
+    } osd_cap_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int  cmd``
+
+       -  Capability to query.
+
+    -  ..
+
+       -  ``long val``
+
+       -  Used to store the Data.
+
+Supported capabilities
+~~~~~~~~~~~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``OSD_CAP_MEMSIZE``
+
+       -  Memory size installed on the card.
+
+Description
+~~~~~~~~~~~
+
+This structure of data used with the `OSD_GET_CAPABILITY`_ call.
+
+
+-----
+
+
+OSD Function Calls
+==================
+
+OSD_SEND_CMD
+------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: OSD_SEND_CMD
+
+.. code-block:: c
+
+    int ioctl(int fd, int request = OSD_SEND_CMD, enum osd_cmd_t *cmd)
+
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Pointer to the location of the structure `osd_cmd_t`_ for this
+          command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl sends the `OSD_Command`_ to the card.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EINVAL``
+
+       -  Command is out of range.
+
+
+-----
+
+
+OSD_GET_CAPABILITY
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: OSD_GET_CAPABILITY
+
+.. code-block:: c
+
+    int ioctl(int fd, int request = OSD_GET_CAPABILITY,
+    struct osd_cap_t *cap)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``OSD_GET_CAPABILITY`` for this command.
+
+    -  ..
+
+       -  ``unsigned int *cap``
+
+       -  Pointer to the location of the structure `osd_cap_t`_ for this
+          command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is used to get the capabilities of the OSD of the AV7110 based
+DVB-decoder-card in use.
+
+.. note::
+    The structure osd_cap_t has to be setup by the user and passed to the
+    driver.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  ..
+
+       -  ``EINVAL``
+
+       -  Unsupported capability.
+
+
+-----
+
+
+open()
+------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+.. c:function:: int open(const char *deviceName, int flags)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``const char *deviceName``
+
+       -  Name of specific OSD device.
+
+    -  ..
+
+       -  :rspan:`3` ``int flags``
+
+       -  :cspan:`1` A bit-wise OR of the following flags:
+
+    -  ..
+
+       -  ``O_RDONLY``
+
+       -  read-only access
+
+    -  ..
+
+       -  ``O_RDWR``
+
+       -  read/write access
+
+    -  ..
+
+       -  ``O_NONBLOCK``
+       -  | Open in non-blocking mode
+          | (blocking mode is the default)
+
+Description
+~~~~~~~~~~~
+
+This system call opens a named OSD device (e.g.
+``/dev/dvb/adapter?/osd0``) for subsequent use.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  ..
+
+       -  ``EINTERNAL``
+
+       -  Internal error.
+
+    -  ..
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  ..
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
+
+
+-----
+
+
+close()
+-------
+
+Synopsis
+~~~~~~~~
+
+.. c:function:: int close(int fd)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_ .
+
+Description
+~~~~~~~~~~~
+
+This system call closes a previously opened OSD device.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst
new file mode 100644
index 000000000000..b9fd5cadae24
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst
@@ -0,0 +1,2430 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later OR GPL-2.0
+
+.. c:namespace:: dtv.legacy.video
+
+.. _dvb_video:
+
+================
+DVB Video Device
+================
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+The DVB video device controls the MPEG2 video decoder of the DVB
+hardware. It can be accessed through ``/dev/dvb/adapter0/video0``. Data
+types and ioctl definitions can be accessed by including
+``linux/dvb/video.h`` in your application.
+
+Note that the DVB video device only controls decoding of the MPEG video
+stream, not its presentation on the TV or computer screen. On PCs this
+is typically handled by an associated video4linux device, e.g.
+``/dev/video``, which allows scaling and defining output windows.
+
+Most DVB cards don’t have their own MPEG decoder, which results in the
+omission of the audio and video device as well as the video4linux
+device.
+
+These ioctls were also used by V4L2 to control MPEG decoders implemented
+in V4L2. The use of these ioctls for that purpose has been made obsolete
+and proper V4L2 ioctls or controls have been created to replace that
+functionality. Use :ref:`V4L2 ioctls<video>` for new drivers!
+
+
+Video Data Types
+================
+
+
+
+video_format_t
+--------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_FORMAT_4_3,
+	VIDEO_FORMAT_16_9,
+	VIDEO_FORMAT_221_1
+    } video_format_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``VIDEO_FORMAT_4_3``
+
+       -  Select 4:3 format.
+
+    -  ..
+
+       -  ``VIDEO_FORMAT_16_9``
+
+       -  Select 16:9 format.
+
+    -  ..
+
+       -  ``VIDEO_FORMAT_221_1``
+
+       -  Select 2.21:1 format.
+
+Description
+~~~~~~~~~~~
+
+The ``video_format_t`` data type
+is used in the `VIDEO_SET_FORMAT`_ function to tell the driver which
+aspect ratio the output hardware (e.g. TV) has. It is also used in the
+data structures `video_status`_ returned by `VIDEO_GET_STATUS`_
+and `video_event`_ returned by `VIDEO_GET_EVENT`_ which report
+about the display format of the current video stream.
+
+
+-----
+
+
+video_displayformat_t
+---------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_PAN_SCAN,
+	VIDEO_LETTER_BOX,
+	VIDEO_CENTER_CUT_OUT
+    } video_displayformat_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``VIDEO_PAN_SCAN``
+
+       -  Use pan and scan format.
+
+    -  ..
+
+       -  ``VIDEO_LETTER_BOX``
+
+       -  Use letterbox format.
+
+    -  ..
+
+       -  ``VIDEO_CENTER_CUT_OUT``
+
+       -  Use center cut out format.
+
+Description
+~~~~~~~~~~~
+
+In case the display format of the video stream and of the display
+hardware differ the application has to specify how to handle the
+cropping of the picture. This can be done using the
+`VIDEO_SET_DISPLAY_FORMAT`_ call which accepts this enum as argument.
+
+
+-----
+
+
+video_size_t
+------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+    } video_size_t;
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int w``
+
+       -  Video width in pixels.
+
+    -  ..
+
+       -  ``int h``
+
+       -  Video height in pixels.
+
+    -  ..
+
+       -  `video_format_t`_ ``aspect_ratio``
+
+       -  Aspect ratio.
+
+Description
+~~~~~~~~~~~
+
+Used in the struct `video_event`_. It stores the resolution and
+aspect ratio of the video.
+
+
+-----
+
+
+video_stream_source_t
+---------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_SOURCE_DEMUX,
+	VIDEO_SOURCE_MEMORY
+    } video_stream_source_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``VIDEO_SOURCE_DEMUX``
+
+       -  :cspan:`1` Select the demux as the main source.
+
+    -  ..
+
+       -  ``VIDEO_SOURCE_MEMORY``
+
+       -  If this source is selected, the stream
+          comes from the user through the write
+          system call.
+
+Description
+~~~~~~~~~~~
+
+The video stream source is set through the `VIDEO_SELECT_SOURCE`_ call
+and can take the following values, depending on whether we are replaying
+from an internal (demuxer) or external (user write) source.
+VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the
+frontend or the DVR device) as the source of the video stream. If
+VIDEO_SOURCE_MEMORY is selected the stream comes from the application
+through the `write()`_ system call.
+
+
+-----
+
+
+video_play_state_t
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    typedef enum {
+	VIDEO_STOPPED,
+	VIDEO_PLAYING,
+	VIDEO_FREEZED
+    } video_play_state_t;
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``VIDEO_STOPPED``
+
+       -  Video is stopped.
+
+    -  ..
+
+       -  ``VIDEO_PLAYING``
+
+       -  Video is currently playing.
+
+    -  ..
+
+       -  ``VIDEO_FREEZED``
+
+       -  Video is frozen.
+
+Description
+~~~~~~~~~~~
+
+This values can be returned by the `VIDEO_GET_STATUS`_ call
+representing the state of video playback.
+
+
+-----
+
+
+struct video_command
+--------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    struct video_command {
+	__u32 cmd;
+	__u32 flags;
+	union {
+	    struct {
+		__u64 pts;
+	    } stop;
+
+	    struct {
+		__s32 speed;
+		__u32 format;
+	    } play;
+
+	    struct {
+		__u32 data[16];
+	    } raw;
+	};
+    };
+
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``__u32 cmd``
+
+       -  `Decoder command`_
+
+    -  ..
+
+       -  ``__u32 flags``
+
+       -  Flags for the `Decoder command`_.
+
+    -  ..
+
+       -  ``struct stop``
+
+       -  ``__u64 pts``
+
+       -  MPEG PTS
+
+    -  ..
+
+       -  :rspan:`5` ``stuct play``
+
+       -  :rspan:`4` ``__s32 speed``
+
+       -   0 or 1000 specifies normal speed,
+
+    -  ..
+
+       -   1:  specifies forward single stepping,
+
+    -  ..
+
+       -   -1: specifies backward single stepping,
+
+    -  ..
+
+       -   >1: playback at speed / 1000 of the normal speed
+
+    -  ..
+
+       -   <-1: reverse playback at ( -speed / 1000 ) of the normal speed.
+
+    -  ..
+
+       -  ``__u32 format``
+
+       -  `Play input formats`_
+
+    -  ..
+
+       -  ``__u32 data[16]``
+
+       -  Reserved
+
+Description
+~~~~~~~~~~~
+
+The structure must be zeroed before use by the application. This ensures
+it can be extended safely in the future.
+
+
+-----
+
+
+Predefined decoder commands and flags
+-------------------------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    #define VIDEO_CMD_PLAY                      (0)
+    #define VIDEO_CMD_STOP                      (1)
+    #define VIDEO_CMD_FREEZE                    (2)
+    #define VIDEO_CMD_CONTINUE                  (3)
+
+    #define VIDEO_CMD_FREEZE_TO_BLACK      (1 << 0)
+
+    #define VIDEO_CMD_STOP_TO_BLACK        (1 << 0)
+    #define VIDEO_CMD_STOP_IMMEDIATELY     (1 << 1)
+
+    #define VIDEO_PLAY_FMT_NONE                 (0)
+    #define VIDEO_PLAY_FMT_GOP                  (1)
+
+    #define VIDEO_VSYNC_FIELD_UNKNOWN           (0)
+    #define VIDEO_VSYNC_FIELD_ODD               (1)
+    #define VIDEO_VSYNC_FIELD_EVEN              (2)
+    #define VIDEO_VSYNC_FIELD_PROGRESSIVE       (3)
+
+Constants
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  :rspan:`3` _`Decoder command`
+
+       -  ``VIDEO_CMD_PLAY``
+
+       -  Start playback.
+
+    -  ..
+
+       -  ``VIDEO_CMD_STOP``
+
+       -  Stop playback.
+
+    -  ..
+
+       -  ``VIDEO_CMD_FREEZE``
+
+       -  Freeze playback.
+
+    -  ..
+
+       -  ``VIDEO_CMD_CONTINUE``
+
+       -  Continue playback after freeze.
+
+    -  ..
+
+       -  Flags for ``VIDEO_CMD_FREEZE``
+
+       -  ``VIDEO_CMD_FREEZE_TO_BLACK``
+
+       -  Show black picture on freeze.
+
+    -  ..
+
+       -  :rspan:`1` Flags for ``VIDEO_CMD_STOP``
+
+       -  ``VIDEO_CMD_STOP_TO_BLACK``
+
+       -  Show black picture on stop.
+
+    -  ..
+
+       -  ``VIDEO_CMD_STOP_IMMEDIATELY``
+
+       -  Stop immediately, without emptying buffers.
+
+    -  ..
+
+       -  :rspan:`1` _`Play input formats`
+
+       -  ``VIDEO_PLAY_FMT_NONE``
+
+       -  The decoder has no special format requirements
+
+    -  ..
+
+       -  ``VIDEO_PLAY_FMT_GOP``
+
+       -  The decoder requires full GOPs
+
+    -  ..
+
+       -  :rspan:`3` Field order
+
+       -  ``VIDEO_VSYNC_FIELD_UNKNOWN``
+
+       -  FIELD_UNKNOWN can be used if the hardware does not know
+          whether the Vsync is for an odd, even or progressive
+          (i.e. non-interlaced) field.
+
+    -  ..
+
+       -  ``VIDEO_VSYNC_FIELD_ODD``
+
+       -  Vsync is for an odd field.
+
+    -  ..
+
+       -  ``VIDEO_VSYNC_FIELD_EVEN``
+
+       -  Vsync is for an even field.
+
+    -  ..
+
+       -  ``VIDEO_VSYNC_FIELD_PROGRESSIVE``
+
+       -  progressive (i.e. non-interlaced)
+
+
+-----
+
+
+video_event
+-----------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    struct video_event {
+	__s32 type;
+    #define VIDEO_EVENT_SIZE_CHANGED        1
+    #define VIDEO_EVENT_FRAME_RATE_CHANGED  2
+    #define VIDEO_EVENT_DECODER_STOPPED     3
+    #define VIDEO_EVENT_VSYNC               4
+	long timestamp;
+	union {
+	    video_size_t size;
+	    unsigned int frame_rate;
+	    unsigned char vsync_field;
+	} u;
+    };
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  :rspan:`4` ``__s32 type``
+
+       -  :cspan:`1` Event type.
+
+    -  ..
+
+       -  ``VIDEO_EVENT_SIZE_CHANGED``
+
+       -  Size changed.
+
+    -  ..
+
+       -  ``VIDEO_EVENT_FRAME_RATE_CHANGED``
+
+       -  Framerate changed.
+
+    -  ..
+
+       -  ``VIDEO_EVENT_DECODER_STOPPED``
+
+       -  Decoder stopped.
+
+    -  ..
+
+       -  ``VIDEO_EVENT_VSYNC``
+
+       -  Vsync occurred.
+
+    -  ..
+
+       -  ``long timestamp``
+
+       -  :cspan:`1` MPEG PTS at occurrence.
+
+    -  ..
+
+       -  :rspan:`2` ``union u``
+
+       -  `video_size_t`_ size
+
+       -  Resolution and aspect ratio of the video.
+
+    -  ..
+
+       -  ``unsigned int frame_rate``
+
+       -  in frames per 1000sec
+
+    -  ..
+
+       -  ``unsigned char vsync_field``
+
+       -  | unknown / odd / even / progressive
+          | See: `Predefined decoder commands and flags`_
+
+Description
+~~~~~~~~~~~
+
+This is the structure of a video event as it is returned by the
+`VIDEO_GET_EVENT`_ call. See there for more details.
+
+
+-----
+
+
+video_status
+------------
+
+Synopsis
+~~~~~~~~
+
+The `VIDEO_GET_STATUS`_ call returns the following structure informing
+about various states of the playback operation.
+
+.. code-block:: c
+
+    struct video_status {
+	int                    video_blank;
+	video_play_state_t     play_state;
+	video_stream_source_t  stream_source;
+	video_format_t         video_format;
+	video_displayformat_t  display_format;
+    };
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  :rspan:`2` ``int video_blank``
+
+       -  :cspan:`1` Show blank video on freeze?
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  Blank screen when freeze.
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  Show last decoded frame.
+
+    -  ..
+
+       -  `video_play_state_t`_ ``play_state``
+
+       -  Current state of playback.
+
+    -  ..
+
+       -  `video_stream_source_t`_ ``stream_source``
+
+       -  Current source (demux/memory).
+
+    -  ..
+
+       -  `video_format_t`_ ``video_format``
+
+       -  Current aspect ratio of stream.
+
+    -  ..
+
+       -  `video_displayformat_t`_ ``display_format``
+
+       -  Applied cropping mode.
+
+Description
+~~~~~~~~~~~
+
+If ``video_blank`` is set ``TRUE`` video will be blanked out if the
+channel is changed or if playback is stopped. Otherwise, the last picture
+will be displayed. ``play_state`` indicates if the video is currently
+frozen, stopped, or being played back. The ``stream_source`` corresponds
+to the selected source for the video stream. It can come either from the
+demultiplexer or from memory. The ``video_format`` indicates the aspect
+ratio (one of 4:3 or 16:9) of the currently played video stream.
+Finally, ``display_format`` corresponds to the applied cropping mode in
+case the source video format is not the same as the format of the output
+device.
+
+
+-----
+
+
+video_still_picture
+-------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    struct video_still_picture {
+    char *iFrame;
+    int32_t size;
+    };
+
+Variables
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``char *iFrame``
+
+       -  Pointer to a single iframe in memory.
+
+    -  ..
+
+       -  ``int32_t size``
+
+       -  Size of the iframe.
+
+
+Description
+~~~~~~~~~~~
+
+An I-frame displayed via the `VIDEO_STILLPICTURE`_ call is passed on
+within this structure.
+
+
+-----
+
+
+video capabilities
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    #define VIDEO_CAP_MPEG1   1
+    #define VIDEO_CAP_MPEG2   2
+    #define VIDEO_CAP_SYS     4
+    #define VIDEO_CAP_PROG    8
+
+Constants
+~~~~~~~~~
+Bit definitions for capabilities:
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``VIDEO_CAP_MPEG1``
+
+       -  :cspan:`1` The hardware can decode MPEG1.
+
+    -  ..
+
+       -  ``VIDEO_CAP_MPEG2``
+
+       -  The hardware can decode MPEG2.
+
+    -  ..
+
+       -  ``VIDEO_CAP_SYS``
+
+       -  The video device accepts system stream.
+
+          You still have to open the video and the audio device
+          but only send the stream to the video device.
+
+    -  ..
+
+       -  ``VIDEO_CAP_PROG``
+
+       -  The video device accepts program stream.
+
+          You still have to open the video and the audio device
+          but only send the stream to the video device.
+
+Description
+~~~~~~~~~~~
+
+A call to `VIDEO_GET_CAPABILITIES`_ returns an unsigned integer with the
+following bits set according to the hardware's capabilities.
+
+
+-----
+
+
+Video Function Calls
+====================
+
+
+VIDEO_STOP
+----------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_STOP
+
+.. code-block:: c
+
+	int ioctl(fd, VIDEO_STOP, int mode)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``VIDEO_STOP`` for this command.
+
+    -  ..
+
+       -  :rspan:`2` ``int mode``
+
+       -  :cspan:`1` Indicates how the screen shall be handled.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  Blank screen when stop.
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  Show last decoded frame.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use
+the V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call asks the Video Device to stop playing the current
+stream. Depending on the input parameter, the screen can be blanked out
+or displaying the last decoded frame.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_PLAY
+----------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_PLAY
+
+.. code-block:: c
+
+	int ioctl(fd, VIDEO_PLAY)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_PLAY`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use
+the V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call asks the Video Device to start playing a video stream
+from the selected source.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_FREEZE
+------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_FREEZE
+
+.. code-block:: c
+
+	int ioctl(fd, VIDEO_FREEZE)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_FREEZE`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use
+the V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call suspends the live video stream being played, if
+VIDEO_SOURCE_DEMUX is selected. Decoding and playing are frozen.
+It is then possible to restart the decoding and playing process of the
+video stream using the `VIDEO_CONTINUE`_ command.
+If VIDEO_SOURCE_MEMORY is selected in the ioctl call
+`VIDEO_SELECT_SOURCE`_, the Digital TV subsystem will not decode any more
+data until the ioctl call `VIDEO_CONTINUE`_ or `VIDEO_PLAY`_ is performed.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_CONTINUE
+--------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_CONTINUE
+
+.. code-block:: c
+
+	int ioctl(fd, VIDEO_CONTINUE)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_CONTINUE`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for Digital TV devices only. To control a V4L2 decoder use
+the V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
+
+This ioctl call restarts decoding and playing processes of the video
+stream which was played before a call to `VIDEO_FREEZE`_ was made.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_SELECT_SOURCE
+-------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_SELECT_SOURCE
+
+.. code-block:: c
+
+	int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_SELECT_SOURCE`` for this command.
+
+    -  ..
+
+       -  `video_stream_source_t`_ ``source``
+
+       -  Indicates which source shall be used for the Video stream.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for Digital TV devices only. This ioctl was also supported
+by the V4L2 ivtv driver, but that has been replaced by the ivtv-specific
+``IVTV_IOC_PASSTHROUGH_MODE`` ioctl.
+
+This ioctl call informs the video device which source shall be used for
+the input data. The possible sources are demux or memory. If memory is
+selected, the data is fed to the video device through the write command
+using the struct `video_stream_source_t`_. If demux is selected, the data
+is directly transferred from the onboard demux-device to the decoder.
+
+The data fed to the decoder is also controlled by the PID-filter.
+Output selection: :c:type:`dmx_output` ``DMX_OUT_DECODER``.
+
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_SET_BLANK
+---------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_SET_BLANK
+
+.. code-block:: c
+
+	int ioctl(fd, VIDEO_SET_BLANK, int mode)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  :cspan:`1` Equals ``VIDEO_SET_BLANK`` for this command.
+
+    -  ..
+
+       -  :rspan:`2` ``int mode``
+
+       -  :cspan:`1` Indicates if the screen shall be blanked.
+
+    -  ..
+
+       -  TRUE  ( != 0 )
+
+       -  Blank screen when stop.
+
+    -  ..
+
+       -  FALSE ( == 0 )
+
+       -  Show last decoded frame.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Video Device to blank out the picture.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_GET_STATUS
+----------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_GET_STATUS
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_GET_STATUS,
+	struct video_status *status)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_GET_STATUS`` for this command.
+
+    -  ..
+
+       -  ``struct`` `video_status`_ ``*status``
+
+       -  Returns the current status of the Video Device.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Video Device to return the current status of
+the device.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_GET_EVENT
+---------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_GET_EVENT
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_GET_EVENT,
+	struct video_event *ev)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_GET_EVENT`` for this command.
+
+    -  ..
+
+       -  ``struct`` `video_event`_ ``*ev``
+
+       -  Points to the location where the event, if any, is to be stored.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl is for DVB devices only. To get events from a V4L2 decoder
+use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead.
+
+This ioctl call returns an event of type `video_event`_ if available. A
+certain number of the latest events will be cued and returned in order of
+occurrence. Older events may be discarded if not fetched in time. If
+an event is not available, the behavior depends on whether the device is
+in blocking or non-blocking mode. In the latter case, the call fails
+immediately with errno set to ``EWOULDBLOCK``. In the former case, the
+call blocks until an event becomes available. The standard Linux poll()
+and/or select() system calls can be used with the device file descriptor
+to watch for new events. For select(), the file descriptor should be
+included in the exceptfds argument, and for poll(), POLLPRI should be
+specified as the wake-up condition. Read-only permissions are sufficient
+for this ioctl call.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EWOULDBLOCK``
+
+       -  :cspan:`1` There is no event pending, and the device is in
+          non-blocking mode.
+
+    -  ..
+
+       -  ``EOVERFLOW``
+
+       -  Overflow in event queue - one or more events were lost.
+
+
+-----
+
+
+VIDEO_SET_DISPLAY_FORMAT
+------------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_SET_DISPLAY_FORMAT
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_SET_DISPLAY_FORMAT,
+	video_display_format_t format)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_SET_DISPLAY_FORMAT`` for this command.
+
+    -  ..
+
+       -  `video_displayformat_t`_ ``format``
+
+       -  Selects the video format to be used.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Video Device to select the video format to be
+applied by the MPEG chip on the video.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_STILLPICTURE
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_STILLPICTURE
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_STILLPICTURE,
+	struct video_still_picture *sp)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_STILLPICTURE`` for this command.
+
+    -  ..
+
+       -  ``struct`` `video_still_picture`_ ``*sp``
+
+       -  Pointer to the location where the struct with the I-frame
+          and size is stored.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Video Device to display a still picture
+(I-frame). The input data shall be the section of an elementary video
+stream containing an I-frame. Typically this section is extracted from a
+TS or PES recording. Resolution and codec (see `video capabilities`_) must
+be supported by the device. If the pointer is NULL, then the current
+displayed still picture is blanked.
+
+e.g. The AV7110 supports MPEG1 and MPEG2 with the common PAL-SD
+resolutions.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_FAST_FORWARD
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_FAST_FORWARD
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_FAST_FORWARD, int nFrames)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_FAST_FORWARD`` for this command.
+
+    -  ..
+
+       -  ``int nFrames``
+
+       -  The number of frames to skip.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the Video Device to skip decoding of N number of
+I-frames. This call can only be used if ``VIDEO_SOURCE_MEMORY`` is
+selected.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EPERM``
+
+       -  Mode ``VIDEO_SOURCE_MEMORY`` not selected.
+
+
+-----
+
+
+VIDEO_SLOWMOTION
+----------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_SLOWMOTION
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_SLOWMOTION, int nFrames)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_SLOWMOTION`` for this command.
+
+    -  ..
+
+       -  ``int nFrames``
+
+       -  The number of times to repeat each frame.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the video device to repeat decoding frames N number
+of times. This call can only be used if ``VIDEO_SOURCE_MEMORY`` is
+selected.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EPERM``
+
+       -  Mode ``VIDEO_SOURCE_MEMORY`` not selected.
+
+
+-----
+
+
+VIDEO_GET_CAPABILITIES
+----------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_GET_CAPABILITIES
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, unsigned int *cap)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_GET_CAPABILITIES`` for this command.
+
+    -  ..
+
+       -  ``unsigned int *cap``
+
+       -  Pointer to a location where to store the capability information.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call asks the video device about its decoding capabilities.
+On success it returns an integer which has bits set according to the
+defines in `video capabilities`_.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_CLEAR_BUFFER
+------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_CLEAR_BUFFER
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_CLEAR_BUFFER)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_CLEAR_BUFFER`` for this command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl call clears all video buffers in the driver and in the
+decoder hardware.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_SET_STREAMTYPE
+--------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_SET_STREAMTYPE
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, int type)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_SET_STREAMTYPE`` for this command.
+
+    -  ..
+
+       -  ``int type``
+
+       -  Stream type.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl tells the driver which kind of stream to expect being written
+to it.
+Intelligent decoder might also not support or ignore (like the AV7110)
+this call and determine the stream type themselves.
+
+Currently used stream types:
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    -  ..
+
+       -  Codec
+
+       -  Stream type
+
+    -  ..
+
+       -  MPEG2
+
+       -  0
+
+    -  ..
+
+       -  MPEG4 h.264
+
+       -  1
+
+    -  ..
+
+       -  VC1
+
+       -  3
+
+    -  ..
+
+       -  MPEG4 Part2
+
+       -  4
+
+    -  ..
+
+       -  VC1 SM
+
+       -  5
+
+    -  ..
+
+       -  MPEG1
+
+       -  6
+
+    -  ..
+
+       -  HEVC h.265
+
+       -  | 7
+          | DREAMBOX: 22
+
+    -  ..
+
+       -  AVS
+
+       -  16
+
+    -  ..
+
+       -  AVS2
+
+       -  40
+
+Not every decoder supports all stream types.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_SET_FORMAT
+----------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_SET_FORMAT
+
+.. code-block:: c
+
+	int ioctl(fd, int request = VIDEO_SET_FORMAT, video_format_t format)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_SET_FORMAT`` for this command.
+
+    -  ..
+
+       -  `video_format_t`_ ``format``
+
+       -  Video format of TV as defined in section `video_format_t`_.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl sets the screen format (aspect ratio) of the connected output
+device (TV) so that the output of the decoder can be adjusted
+accordingly.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_GET_SIZE
+--------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_GET_SIZE
+
+.. code-block:: c
+
+	int ioctl(int fd, int request = VIDEO_GET_SIZE, video_size_t *size)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call,
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_GET_SIZE`` for this command.
+
+    -  ..
+
+       -  `video_size_t`_ ``*size``
+
+       -  Returns the size and aspect ratio.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+This ioctl returns the size and aspect ratio.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_GET_PTS
+-------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_GET_PTS
+
+.. code-block:: c
+
+	int ioctl(int fd, int request = VIDEO_GET_PTS, __u64 *pts)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_GET_PTS`` for this command.
+
+    -  ..
+
+       -  ``__u64 *pts``
+
+       -  Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
+          ISO/IEC 13818-1.
+
+          The PTS should belong to the currently played frame if possible,
+          but may also be a value close to it like the PTS of the last
+          decoded frame or the last PTS extracted by the PES parser.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+For V4L2 decoders this ioctl has been replaced by the
+``V4L2_CID_MPEG_VIDEO_DEC_PTS`` control.
+
+This ioctl call asks the Video Device to return the current PTS
+timestamp.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_GET_FRAME_COUNT
+---------------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_GET_FRAME_COUNT
+
+.. code-block:: c
+
+	int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_GET_FRAME_COUNT`` for this command.
+
+    -  ..
+
+       -  ``__u64 *pts``
+
+       -  Returns the number of frames displayed since the decoder was
+          started.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+For V4L2 decoders this ioctl has been replaced by the
+``V4L2_CID_MPEG_VIDEO_DEC_FRAME`` control.
+
+This ioctl call asks the Video Device to return the number of displayed
+frames since the decoder was started.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_COMMAND
+-------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_COMMAND
+
+.. code-block:: c
+
+	int ioctl(int fd, int request = VIDEO_COMMAND,
+	struct video_command *cmd)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_COMMAND`` for this command.
+
+    -  ..
+
+       -  `struct video_command`_ ``*cmd``
+
+       -  Commands the decoder.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+For V4L2 decoders this ioctl has been replaced by the
+:ref:`VIDIOC_DECODER_CMD` ioctl.
+
+This ioctl commands the decoder. The `struct video_command`_ is a
+subset of the ``v4l2_decoder_cmd`` struct, so refer to the
+:ref:`VIDIOC_DECODER_CMD` documentation for
+more information.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+VIDEO_TRY_COMMAND
+-----------------
+
+Synopsis
+~~~~~~~~
+
+.. c:macro:: VIDEO_TRY_COMMAND
+
+.. code-block:: c
+
+	int ioctl(int fd, int request = VIDEO_TRY_COMMAND,
+	struct video_command *cmd)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``int request``
+
+       -  Equals ``VIDEO_TRY_COMMAND`` for this command.
+
+    -  ..
+
+       -  `struct video_command`_ ``*cmd``
+
+       -  Try a decoder command.
+
+Description
+~~~~~~~~~~~
+
+.. attention:: Do **not** use in new drivers!
+             See: :ref:`legacy_dvb_decoder_notes`
+
+For V4L2 decoders this ioctl has been replaced by the
+:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` ioctl.
+
+This ioctl tries a decoder command. The `struct video_command`_ is a
+subset of the ``v4l2_decoder_cmd`` struct, so refer to the
+:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation
+for more information.
+
+Return Value
+~~~~~~~~~~~~
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+-----
+
+
+open()
+------
+
+Synopsis
+~~~~~~~~
+
+.. code-block:: c
+
+    #include <fcntl.h>
+
+.. c:function:: 	int open(const char *deviceName, int flags)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``const char *deviceName``
+
+       -  Name of specific video device.
+
+    -  ..
+
+       -  :rspan:`3` ``int flags``
+
+       -  :cspan:`1` A bit-wise OR of the following flags:
+
+    -  ..
+
+       -  ``O_RDONLY``
+
+       -  read-only access
+
+    -  ..
+
+       -  ``O_RDWR``
+
+       -  read/write access
+
+    -  ..
+
+       -  ``O_NONBLOCK``
+       -  | Open in non-blocking mode
+          | (blocking mode is the default)
+
+Description
+~~~~~~~~~~~
+
+This system call opens a named video device (e.g.
+/dev/dvb/adapter?/video?) for subsequent use.
+
+When an open() call has succeeded, the device will be ready for use. The
+significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call. This is a standard
+system call, documented in the Linux manual page for fcntl. Only one
+user can open the Video Device in O_RDWR mode. All other attempts to
+open the device in this mode will fail, and an error-code will be
+returned. If the Video Device is opened in O_RDONLY mode, the only
+ioctl call that can be used is `VIDEO_GET_STATUS`_. All other call will
+return an error code.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``ENODEV``
+
+       -  :cspan:`1` Device driver not loaded/available.
+
+    -  ..
+
+       -  ``EINTERNAL``
+
+       -  Internal error.
+
+    -  ..
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  ..
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
+
+
+-----
+
+
+close()
+-------
+
+Synopsis
+~~~~~~~~
+
+.. c:function:: 	int close(int fd)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+Description
+~~~~~~~~~~~
+
+This system call closes a previously opened video device.
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+
+-----
+
+
+write()
+-------
+
+Synopsis
+~~~~~~~~
+
+.. c:function:: size_t write(int fd, const void *buf, size_t count)
+
+Arguments
+~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``int fd``
+
+       -  :cspan:`1` File descriptor returned by a previous call
+          to `open()`_.
+
+    -  ..
+
+       -  ``void *buf``
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  ..
+
+       -  ``size_t count``
+
+       -  Size of buf.
+
+Description
+~~~~~~~~~~~
+
+This system call can only be used if VIDEO_SOURCE_MEMORY is selected
+in the ioctl call `VIDEO_SELECT_SOURCE`_. The data provided shall be in
+PES format, unless the capability allows other formats. TS is the
+most common format for storing DVB-data, it is usually supported too.
+If O_NONBLOCK is not specified the function will block until buffer space
+is available. The amount of data to be transferred is implied by count.
+
+.. note:: See: :ref:`DVB Data Formats <legacy_dvb_decoder_formats>`
+
+Return Value
+~~~~~~~~~~~~
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    -  ..
+
+       -  ``EPERM``
+
+       -  :cspan:`1` Mode ``VIDEO_SOURCE_MEMORY`` not selected.
+
+    -  ..
+
+       -  ``ENOMEM``
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  ..
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/mediactl/media-types.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
index 0ffeece1e0c8..6332e8395263 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/mediactl/media-types.rst
@@ -375,12 +375,11 @@ Types and flags used to represent the media graph elements
 	  are origins of links.
 
     *  -  ``MEDIA_PAD_FL_MUST_CONNECT``
-       -  If this flag is set and the pad is linked to any other pad, then
-	  at least one of those links must be enabled for the entity to be
-	  able to stream. There could be temporary reasons (e.g. device
-	  configuration dependent) for the pad to need enabled links even
-	  when this flag isn't set; the absence of the flag doesn't imply
-	  there is none.
+       -  If this flag is set, then for this pad to be able to stream, it must
+	  be connected by at least one enabled link. There could be temporary
+	  reasons (e.g. device configuration dependent) for the pad to need
+	  enabled links even when this flag isn't set; the absence of the flag
+	  doesn't imply there is none.
 
 
 One and only one of ``MEDIA_PAD_FL_SINK`` and ``MEDIA_PAD_FL_SOURCE``
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
index 810b6a859dc8..da4a358ce762 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
@@ -61,6 +61,21 @@ been accepted. A common case for the kernel not accepting a capability is that
 the kernel is older than the headers the userspace uses, and thus the capability
 is unknown to the kernel.
 
+.. tabularcolumns:: |p{1.5cm}|p{2.9cm}|p{12.9cm}|
+
+.. c:type:: v4l2_subdev_client_capability
+
+.. flat-table:: struct v4l2_subdev_client_capability
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 4 20
+
+    * - __u64
+      - ``capabilities``
+      - Sub-device client capabilities of the opened device.
+
+.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.1cm}|
+
 .. flat-table:: Client Capabilities
     :header-rows:  1
 
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/netlink/netlink-raw.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
index 1e14f5f22b8e..1990eea772d0 100644
--- linux-libre-6.8-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
@@ -150,3 +150,45 @@ attributes from an ``attribute-set``. For example the following
 
 Note that a selector attribute must appear in a netlink message before any
 sub-message attributes that depend on it.
+
+If an attribute such as ``kind`` is defined at more than one nest level, then a
+sub-message selector will be resolved using the value 'closest' to the selector.
+For example, if the same attribute name is defined in a nested ``attribute-set``
+alongside a sub-message selector and also in a top level ``attribute-set``, then
+the selector will be resolved using the value 'closest' to the selector. If the
+value is not present in the message at the same level as defined in the spec
+then this is an error.
+
+Nested struct definitions
+-------------------------
+
+Many raw netlink families such as :doc:`tc<../../networking/netlink_spec/tc>`
+make use of nested struct definitions. The ``netlink-raw`` schema makes it
+possible to embed a struct within a struct definition using the ``struct``
+property. For example, the following struct definition embeds the
+``tc-ratespec`` struct definition for both the ``rate`` and the ``peakrate``
+members of ``struct tc-tbf-qopt``.
+
+.. code-block:: yaml
+
+  -
+    name: tc-tbf-qopt
+    type: struct
+    members:
+      -
+        name: rate
+        type: binary
+        struct: tc-ratespec
+      -
+        name: peakrate
+        type: binary
+        struct: tc-ratespec
+      -
+        name: limit
+        type: u32
+      -
+        name: buffer
+        type: u32
+      -
+        name: mtu
+        type: u32
diff --git linux-libre-6.8-gnu/Documentation/userspace-api/perf_ring_buffer.rst linux-libre-6.9-rc6-gnu/Documentation/userspace-api/perf_ring_buffer.rst
new file mode 100644
index 000000000000..bde9d8cbc106
--- /dev/null
+++ linux-libre-6.9-rc6-gnu/Documentation/userspace-api/perf_ring_buffer.rst
@@ -0,0 +1,830 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Perf ring buffer
+================
+
+.. CONTENTS
+
+    1. Introduction
+
+    2. Ring buffer implementation
+    2.1  Basic algorithm
+    2.2  Ring buffer for different tracing modes
+    2.2.1       Default mode
+    2.2.2       Per-thread mode
+    2.2.3       Per-CPU mode
+    2.2.4       System wide mode
+    2.3  Accessing buffer
+    2.3.1       Producer-consumer model
+    2.3.2       Properties of the ring buffers
+    2.3.3       Writing samples into buffer
+    2.3.4       Reading samples from buffer
+    2.3.5       Memory synchronization
+
+    3. The mechanism of AUX ring buffer
+    3.1  The relationship between AUX and regular ring buffers
+    3.2  AUX events
+    3.3  Snapshot mode
+
+
+1. Introduction
+===============
+
+The ring buffer is a fundamental mechanism for data transfer.  perf uses
+ring buffers to transfer event data from kernel to user space, another
+kind of ring buffer which is so called auxiliary (AUX) ring buffer also
+plays an important role for hardware tracing with Intel PT, Arm
+CoreSight, etc.
+
+The ring buffer implementation is critical but it's also a very
+challenging work.  On the one hand, the kernel and perf tool in the user
+space use the ring buffer to exchange data and stores data into data
+file, thus the ring buffer needs to transfer data with high throughput;
+on the other hand, the ring buffer management should avoid significant
+overload to distract profiling results.
+
+This documentation dives into the details for perf ring buffer with two
+parts: firstly it explains the perf ring buffer implementation, then the
+second part discusses the AUX ring buffer mechanism.
+
+2. Ring buffer implementation
+=============================
+
+2.1 Basic algorithm
+-------------------
+
+That said, a typical ring buffer is managed by a head pointer and a tail
+pointer; the head pointer is manipulated by a writer and the tail
+pointer is updated by a reader respectively.
+
+::
+
+        +---------------------------+
+        |   |   |***|***|***|   |   |
+        +---------------------------+
+                `-> Tail    `-> Head
+
+        * : the data is filled by the writer.
+
+                Figure 1. Ring buffer
+
+Perf uses the same way to manage its ring buffer.  In the implementation
+there are two key data structures held together in a set of consecutive
+pages, the control structure and then the ring buffer itself.  The page
+with the control structure in is known as the "user page".  Being held
+in continuous virtual addresses simplifies locating the ring buffer
+address, it is in the pages after the page with the user page.
+
+The control structure is named as ``perf_event_mmap_page``, it contains a
+head pointer ``data_head`` and a tail pointer ``data_tail``.  When the
+kernel starts to fill records into the ring buffer, it updates the head
+pointer to reserve the memory so later it can safely store events into
+the buffer.  On the other side, when the user page is a writable mapping,
+the perf tool has the permission to update the tail pointer after consuming
+data from the ring buffer.  Yet another case is for the user page's
+read-only mapping, which is to be addressed in the section
+:ref:`writing_samples_into_buffer`.
+
+::
+
+          user page                          ring buffer
+    +---------+---------+   +---------------------------------------+
+    |data_head|data_tail|...|   |   |***|***|***|***|***|   |   |   |
+    +---------+---------+   +---------------------------------------+
+        `          `----------------^                   ^
+         `----------------------------------------------|
+
+              * : the data is filled by the writer.
+
+                Figure 2. Perf ring buffer
+
+When using the ``perf record`` tool, we can specify the ring buffer size
+with option ``-m`` or ``--mmap-pages=``, the given size will be rounded up
+to a power of two that is a multiple of a page size.  Though the kernel
+allocates at once for all memory pages, it's deferred to map the pages
+to VMA area until the perf tool accesses the buffer from the user space.
+In other words, at the first time accesses the buffer's page from user
+space in the perf tool, a data abort exception for page fault is taken
+and the kernel uses this occasion to map the page into process VMA
+(see ``perf_mmap_fault()``), thus the perf tool can continue to access
+the page after returning from the exception.
+
+2.2 Ring buffer for different tracing modes
+-------------------------------------------
+
+The perf profiles programs with different modes: default mode, per thread
+mode, per cpu mode, and system wide mode.  This section describes these
+modes and how the ring buffer meets requirements for them.  At last we
+will review the race conditions caused by these modes.
+
+2.2.1 Default mode
+^^^^^^^^^^^^^^^^^^
+
+Usually we execute ``perf record`` command followed by a profiling program
+name, like below command::
+
+        perf record test_program
+
+This command doesn't specify any options for CPU and thread modes, the
+perf tool applies the default mode on the perf event.  It maps all the
+CPUs in the system and the profiled program's PID on the perf event, and
+it enables inheritance mode on the event so that child tasks inherits
+the events.  As a result, the perf event is attributed as::
+
+    evsel::cpus::map[]    = { 0 .. _SC_NPROCESSORS_ONLN-1 }
+    evsel::threads::map[] = { pid }
+    evsel::attr::inherit  = 1
+
+These attributions finally will be reflected on the deployment of ring
+buffers.  As shown below, the perf tool allocates individual ring buffer
+for each CPU, but it only enables events for the profiled program rather
+than for all threads in the system.  The *T1* thread represents the
+thread context of the 'test_program', whereas *T2* and *T3* are irrelevant
+threads in the system.   The perf samples are exclusively collected for
+the *T1* thread and stored in the ring buffer associated with the CPU on
+which the *T1* thread is running.
+
+::
+
+              T1                      T2                 T1
+            +----+              +-----------+          +----+
+    CPU0    |xxxx|              |xxxxxxxxxxx|          |xxxx|
+            +----+--------------+-----------+----------+----+-------->
+              |                                          |
+              v                                          v
+            +-----------------------------------------------------+
+            |                  Ring buffer 0                      |
+            +-----------------------------------------------------+
+
+                   T1
+                 +-----+
+    CPU1         |xxxxx|
+            -----+-----+--------------------------------------------->
+                    |
+                    v
+            +-----------------------------------------------------+
+            |                  Ring buffer 1                      |
+            +-----------------------------------------------------+
+
+                                        T1              T3
+                                      +----+        +-------+
+    CPU2                              |xxxx|        |xxxxxxx|
+            --------------------------+----+--------+-------+-------->
+                                        |
+                                        v
+            +-----------------------------------------------------+
+            |                  Ring buffer 2                      |
+            +-----------------------------------------------------+
+
+                              T1
+                       +--------------+
+    CPU3               |xxxxxxxxxxxxxx|
+            -----------+--------------+------------------------------>
+                              |
+                              v
+            +-----------------------------------------------------+
+            |                  Ring buffer 3                      |
+            +-----------------------------------------------------+
+
+	    T1: Thread 1; T2: Thread 2; T3: Thread 3
+	    x: Thread is in running state
+
+                Figure 3. Ring buffer for default mode
+
+2.2.2 Per-thread mode
+^^^^^^^^^^^^^^^^^^^^^
+
+By specifying option ``--per-thread`` in perf command, e.g.
+
+::
+
+        perf record --per-thread test_program
+
+The perf event doesn't map to any CPUs and is only bound to the
+profiled process, thus, the perf event's attributions are::
+
+    evsel::cpus::map[0]   = { -1 }
+    evsel::threads::map[] = { pid }
+    evsel::attr::inherit  = 0
+
+In this mode, a single ring buffer is allocated for the profiled thread;
+if the thread is scheduled on a CPU, the events on that CPU will be
+enabled; and if the thread is scheduled out from the CPU, the events on
+the CPU will be disabled.  When the thread is migrated from one CPU to
+another, the events are to be disabled on the previous CPU and enabled
+on the next CPU correspondingly.
+
+::
+
+              T1                      T2                 T1
+            +----+              +-----------+          +----+
+    CPU0    |xxxx|              |xxxxxxxxxxx|          |xxxx|
+            +----+--------------+-----------+----------+----+-------->
+              |                                           |
+              |    T1                                     |
+              |  +-----+                                  |
+    CPU1      |  |xxxxx|                                  |
+            --|--+-----+----------------------------------|---------->
+              |     |                                     |
+              |     |                   T1            T3  |
+              |     |                 +----+        +---+ |
+    CPU2      |     |                 |xxxx|        |xxx| |
+            --|-----|-----------------+----+--------+---+-|---------->
+              |     |                   |                 |
+              |     |         T1        |                 |
+              |     |  +--------------+ |                 |
+    CPU3      |     |  |xxxxxxxxxxxxxx| |                 |
+            --|-----|--+--------------+-|-----------------|---------->
+              |     |         |         |                 |
+              v     v         v         v                 v
+            +-----------------------------------------------------+
+            |                  Ring buffer                        |
+            +-----------------------------------------------------+
+
+            T1: Thread 1
+            x: Thread is in running state
+
+                Figure 4. Ring buffer for per-thread mode
+
+When perf runs in per-thread mode, a ring buffer is allocated for the
+profiled thread *T1*.  The ring buffer is dedicated for thread *T1*, if the
+thread *T1* is running, the perf events will be recorded into the ring
+buffer; when the thread is sleeping, all associated events will be
+disabled, thus no trace data will be recorded into the ring buffer.
+
+2.2.3 Per-CPU mode
+^^^^^^^^^^^^^^^^^^
+
+The option ``-C`` is used to collect samples on the list of CPUs, for
+example the below perf command receives option ``-C 0,2``::
+
+	perf record -C 0,2 test_program
+
+It maps the perf event to CPUs 0 and 2, and the event is not associated to any
+PID.  Thus the perf event attributions are set as::
+
+    evsel::cpus::map[0]   = { 0, 2 }
+    evsel::threads::map[] = { -1 }
+    evsel::attr::inherit  = 0
+
+This results in the session of ``perf record`` will sample all threads on CPU0
+and CPU2, and be terminated until test_program exits.  Even there have tasks
+running on CPU1 and CPU3, since the ring buffer is absent for them, any
+activities on these two CPUs will be ignored.  A usage case is to combine the
+options for per-thread mode and per-CPU mode, e.g. the options ``–C 0,2`` and
+``––per–thread`` are specified together, the samples are recorded only when
+the profiled thread is scheduled on any of the listed CPUs.
+
+::
+
+              T1                      T2                 T1
+            +----+              +-----------+          +----+
+    CPU0    |xxxx|              |xxxxxxxxxxx|          |xxxx|
+            +----+--------------+-----------+----------+----+-------->
+              |                       |                  |
+              v                       v                  v
+            +-----------------------------------------------------+
+            |                  Ring buffer 0                      |
+            +-----------------------------------------------------+
+
+                   T1
+                 +-----+
+    CPU1         |xxxxx|
+            -----+-----+--------------------------------------------->
+
+                                        T1              T3
+                                      +----+        +-------+
+    CPU2                              |xxxx|        |xxxxxxx|
+            --------------------------+----+--------+-------+-------->
+                                        |               |
+                                        v               v
+            +-----------------------------------------------------+
+            |                  Ring buffer 1                      |
+            +-----------------------------------------------------+
+
+                              T1
+                       +--------------+
+    CPU3               |xxxxxxxxxxxxxx|
+            -----------+--------------+------------------------------>
+
+            T1: Thread 1; T2: Thread 2; T3: Thread 3
+            x: Thread is in running state
+
+                Figure 5. Ring buffer for per-CPU mode
+
+2.2.4 System wide mode
+^^^^^^^^^^^^^^^^^^^^^^
+
+By using option ``–a`` or ``––all–cpus``, perf collects samples on all CPUs
+for all tasks, we call it as the system wide mode, the command is::
+
+        perf record -a test_program
+
+Similar to the per-CPU mode, the perf event doesn't bind to any PID, and
+it maps to all CPUs in the system::
+
+   evsel::cpus::map[]    = { 0 .. _SC_NPROCESSORS_ONLN-1 }
+   evsel::threads::map[] = { -1 }
+   evsel::attr::inherit  = 0
+
+In the system wide mode, every CPU has its own ring buffer, all threads
+are monitored during the running state and the samples are recorded into
+the ring buffer belonging to the CPU which the events occurred on.
+
+::
+
+              T1                      T2                 T1
+            +----+              +-----------+          +----+
+    CPU0    |xxxx|              |xxxxxxxxxxx|          |xxxx|
+            +----+--------------+-----------+----------+----+-------->
+              |                       |                  |
+              v                       v                  v
+            +-----------------------------------------------------+
+            |                  Ring buffer 0                      |
+            +-----------------------------------------------------+
+
+                   T1
+                 +-----+
+    CPU1         |xxxxx|
+            -----+-----+--------------------------------------------->
+                    |
+                    v
+            +-----------------------------------------------------+
+            |                  Ring buffer 1                      |
+            +-----------------------------------------------------+
+
+                                        T1              T3
+                                      +----+        +-------+
+    CPU2                              |xxxx|        |xxxxxxx|
+            --------------------------+----+--------+-------+-------->
+                                        |               |
+                                        v               v
+            +-----------------------------------------------------+
+            |                  Ring buffer 2                      |
+            +-----------------------------------------------------+
+
+                              T1
+                       +--------------+
+    CPU3               |xxxxxxxxxxxxxx|
+            -----------+--------------+------------------------------>
+                              |
+                              v
+            +-----------------------------------------------------+
+            |                  Ring buffer 3                      |
+            +-----------------------------------------------------+
+
+            T1: Thread 1; T2: Thread 2; T3: Thread 3
+            x: Thread is in running state
+
+                Figure 6. Ring buffer for system wide mode
+
+2.3 Accessing buffer
+--------------------
+
+Based on the understanding of how the ring buffer is allocated in
+various modes, this section explains access the ring buffer.
+
+2.3.1 Producer-consumer model
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In the Linux kernel, the PMU events can produce samples which are stored
+into the ring buffer; the perf command in user space consumes the
+samples by reading out data from the ring buffer and finally saves the
+data into the file for post analysis.  It’s a typical producer-consumer
+model for using the ring buffer.
+
+The perf process polls on the PMU events and sleeps when no events are
+incoming.  To prevent frequent exchanges between the kernel and user
+space, the kernel event core layer introduces a watermark, which is
+stored in the ``perf_buffer::watermark``.  When a sample is recorded into
+the ring buffer, and if the used buffer exceeds the watermark, the
+kernel wakes up the perf process to read samples from the ring buffer.
+
+::
+
+                       Perf
+                       / | Read samples
+             Polling  /  `--------------|               Ring buffer
+                     v                  v    ;---------------------v
+    +----------------+     +---------+---------+   +-------------------+
+    |Event wait queue|     |data_head|data_tail|   |***|***|   |   |***|
+    +----------------+     +---------+---------+   +-------------------+
+             ^                  ^ `------------------------^
+             | Wake up tasks    | Store samples
+          +-----------------------------+
+          |  Kernel event core layer    |
+          +-----------------------------+
+
+              * : the data is filled by the writer.
+
+                Figure 7. Writing and reading the ring buffer
+
+When the kernel event core layer notifies the user space, because
+multiple events might share the same ring buffer for recording samples,
+the core layer iterates every event associated with the ring buffer and
+wakes up tasks waiting on the event.  This is fulfilled by the kernel
+function ``ring_buffer_wakeup()``.
+
+After the perf process is woken up, it starts to check the ring buffers
+one by one, if it finds any ring buffer containing samples it will read
+out the samples for statistics or saving into the data file.  Given the
+perf process is able to run on any CPU, this leads to the ring buffer
+potentially being accessed from multiple CPUs simultaneously, which
+causes race conditions.  The race condition handling is described in the
+section :ref:`memory_synchronization`.
+
+2.3.2 Properties of the ring buffers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Linux kernel supports two write directions for the ring buffer: forward and
+backward.  The forward writing saves samples from the beginning of the ring
+buffer, the backward writing stores data from the end of the ring buffer with
+the reversed direction.  The perf tool determines the writing direction.
+
+Additionally, the tool can map buffers in either read-write mode or read-only
+mode to the user space.
+
+The ring buffer in the read-write mode is mapped with the property
+``PROT_READ | PROT_WRITE``.  With the write permission, the perf tool
+updates the ``data_tail`` to indicate the data start position.  Combining
+with the head pointer ``data_head``, which works as the end position of
+the current data, the perf tool can easily know where read out the data
+from.
+
+Alternatively, in the read-only mode, only the kernel keeps to update
+the ``data_head`` while the user space cannot access the ``data_tail`` due
+to the mapping property ``PROT_READ``.
+
+As a result, the matrix below illustrates the various combinations of
+direction and mapping characteristics.  The perf tool employs two of these
+combinations to support buffer types: the non-overwrite buffer and the
+overwritable buffer.
+
+.. list-table::
+   :widths: 1 1 1
+   :header-rows: 1
+
+   * - Mapping mode
+     - Forward
+     - Backward
+   * - read-write
+     - Non-overwrite ring buffer
+     - Not used
+   * - read-only
+     - Not used
+     - Overwritable ring buffer
+
+The non-overwrite ring buffer uses the read-write mapping with forward
+writing.  It starts to save data from the beginning of the ring buffer
+and wrap around when overflow, which is used with the read-write mode in
+the normal ring buffer.  When the consumer doesn't keep up with the
+producer, it would lose some data, the kernel keeps how many records it
+lost and generates the ``PERF_RECORD_LOST`` records in the next time
+when it finds a space in the ring buffer.
+
+The overwritable ring buffer uses the backward writing with the
+read-only mode.  It saves the data from the end of the ring buffer and
+the ``data_head`` keeps the position of current data, the perf always
+knows where it starts to read and until the end of the ring buffer, thus
+it don't need the ``data_tail``.  In this mode, it will not generate the
+``PERF_RECORD_LOST`` records.
+
+.. _writing_samples_into_buffer:
+
+2.3.3 Writing samples into buffer
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When a sample is taken and saved into the ring buffer, the kernel
+prepares sample fields based on the sample type; then it prepares the
+info for writing ring buffer which is stored in the structure
+``perf_output_handle``.  In the end, the kernel outputs the sample into
+the ring buffer and updates the head pointer in the user page so the
+perf tool can see the latest value.
+
+The structure ``perf_output_handle`` serves as a temporary context for
+tracking the information related to the buffer.  The advantages of it is
+that it enables concurrent writing to the buffer by different events.
+For example, a software event and a hardware PMU event both are enabled
+for profiling, two instances of ``perf_output_handle`` serve as separate
+contexts for the software event and the hardware event respectively.
+This allows each event to reserve its own memory space for populating
+the record data.
+
+2.3.4 Reading samples from buffer
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In the user space, the perf tool utilizes the ``perf_event_mmap_page``
+structure to handle the head and tail of the buffer.  It also uses
+``perf_mmap`` structure to keep track of a context for the ring buffer, this
+context includes information about the buffer's starting and ending
+addresses.  Additionally, the mask value can be utilized to compute the
+circular buffer pointer even for an overflow.
+
+Similar to the kernel, the perf tool in the user space first reads out
+the recorded data from the ring buffer, and then updates the buffer's
+tail pointer ``perf_event_mmap_page::data_tail``.
+
+.. _memory_synchronization:
+
+2.3.5 Memory synchronization
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The modern CPUs with relaxed memory model cannot promise the memory
+ordering, this means it’s possible to access the ring buffer and the
+``perf_event_mmap_page`` structure out of order.  To assure the specific
+sequence for memory accessing perf ring buffer, memory barriers are
+used to assure the data dependency.  The rationale for the memory
+synchronization is as below::
+
+  Kernel                          User space
+
+  if (LOAD ->data_tail) {         LOAD ->data_head
+                   (A)            smp_rmb()        (C)
+    STORE $data                   LOAD $data
+    smp_wmb()      (B)            smp_mb()         (D)
+    STORE ->data_head             STORE ->data_tail
+  }
+
+The comments in tools/include/linux/ring_buffer.h gives nice description
+for why and how to use memory barriers, here we will just provide an
+alternative explanation:
+
+(A) is a control dependency so that CPU assures order between checking
+pointer ``perf_event_mmap_page::data_tail`` and filling sample into ring
+buffer;
+
+(D) pairs with (A).  (D) separates the ring buffer data reading from
+writing the pointer ``data_tail``, perf tool first consumes samples and then
+tells the kernel that the data chunk has been released.  Since a reading
+operation is followed by a writing operation, thus (D) is a full memory
+barrier.
+
+(B) is a writing barrier in the middle of two writing operations, which
+makes sure that recording a sample must be prior to updating the head
+pointer.
+
+(C) pairs with (B).  (C) is a read memory barrier to ensure the head
+pointer is fetched before reading samples.
+
+To implement the above algorithm, the ``perf_output_put_handle()`` function
+in the kernel and two helpers ``ring_buffer_read_head()`` and
+``ring_buffer_write_tail()`` in the user space are introduced, they rely
+on memory barriers as described above to ensure the data dependency.
+
+Some architectures support one-way permeable barrier with load-acquire
+and store-release operations, these barriers are more relaxed with less
+performance penalty, so (C) and (D) can be optimized to use barriers
+``smp_load_acquire()`` and ``smp_store_release()`` respectively.
+
+If an architecture doesn’t support load-acquire and store-release in its
+memory model, it will roll back to the old fashion of memory barrier
+operations.  In this case, ``smp_load_acquire()`` encapsulates
+``READ_ONCE()`` + ``smp_mb()``, since ``smp_mb()`` is costly,
+``ring_buffer_read_head()`` doesn't invoke ``smp_load_acquire()`` and it uses
+the barriers ``READ_ONCE()`` + ``smp_rmb()`` instead.
+
+3. The mechanism of AUX ring buffer
+===================================
+
+In this chapter, we will explain the implementation of the AUX ring
+buffer.  In the first part it will discuss the connection between the
+AUX ring buffer and the regular ring buffer, then the second part will
+examine how the AUX ring buffer co-works with the regular ring buffer,
+as well as the additional features introduced by the AUX ring buffer for
+the sampling mechanism.
+
+3.1 The relationship between AUX and regular ring buffers
+---------------------------------------------------------
+
+Generally, the AUX ring buffer is an auxiliary for the regular ring
+buffer.  The regular ring buffer is primarily used to store the event
+samples and every event format complies with the definition in the
+union ``perf_event``; the AUX ring buffer is for recording the hardware
+trace data and the trace data format is hardware IP dependent.
+
+The general use and advantage of the AUX ring buffer is that it is
+written directly by hardware rather than by the kernel.  For example,
+regular profile samples that write to the regular ring buffer cause an
+interrupt.  Tracing execution requires a high number of samples and
+using interrupts would be overwhelming for the regular ring buffer
+mechanism.  Having an AUX buffer allows for a region of memory more
+decoupled from the kernel and written to directly by hardware tracing.
+
+The AUX ring buffer reuses the same algorithm with the regular ring
+buffer for the buffer management.  The control structure
+``perf_event_mmap_page`` extends the new fields ``aux_head`` and ``aux_tail``
+for the head and tail pointers of the AUX ring buffer.
+
+During the initialisation phase, besides the mmap()-ed regular ring
+buffer, the perf tool invokes a second syscall in the
+``auxtrace_mmap__mmap()`` function for the mmap of the AUX buffer with
+non-zero file offset; ``rb_alloc_aux()`` in the kernel allocates pages
+correspondingly, these pages will be deferred to map into VMA when
+handling the page fault, which is the same lazy mechanism with the
+regular ring buffer.
+
+AUX events and AUX trace data are two different things.  Let's see an
+example::
+
+        perf record -a -e cycles -e cs_etm/@tmc_etr0/ -- sleep 2
+
+The above command enables two events: one is the event *cycles* from PMU
+and another is the AUX event *cs_etm* from Arm CoreSight, both are saved
+into the regular ring buffer while the CoreSight's AUX trace data is
+stored in the AUX ring buffer.
+
+As a result, we can see the regular ring buffer and the AUX ring buffer
+are allocated in pairs.  The perf in default mode allocates the regular
+ring buffer and the AUX ring buffer per CPU-wise, which is the same as
+the system wide mode, however, the default mode records samples only for
+the profiled program, whereas the latter mode profiles for all programs
+in the system.  For per-thread mode, the perf tool allocates only one
+regular ring buffer and one AUX ring buffer for the whole session.  For
+the per-CPU mode, the perf allocates two kinds of ring buffers for
+selected CPUs specified by the option ``-C``.
+
+The below figure demonstrates the buffers' layout in the system wide
+mode; if there are any activities on one CPU, the AUX event samples and
+the hardware trace data will be recorded into the dedicated buffers for
+the CPU.
+
+::
+
+              T1                      T2                 T1
+            +----+              +-----------+          +----+
+    CPU0    |xxxx|              |xxxxxxxxxxx|          |xxxx|
+            +----+--------------+-----------+----------+----+-------->
+              |                       |                  |
+              v                       v                  v
+            +-----------------------------------------------------+
+            |                  Ring buffer 0                      |
+            +-----------------------------------------------------+
+              |                       |                  |
+              v                       v                  v
+            +-----------------------------------------------------+
+            |               AUX Ring buffer 0                     |
+            +-----------------------------------------------------+
+
+                   T1
+                 +-----+
+    CPU1         |xxxxx|
+            -----+-----+--------------------------------------------->
+                    |
+                    v
+            +-----------------------------------------------------+
+            |                  Ring buffer 1                      |
+            +-----------------------------------------------------+
+                    |
+                    v
+            +-----------------------------------------------------+
+            |               AUX Ring buffer 1                     |
+            +-----------------------------------------------------+
+
+                                        T1              T3
+                                      +----+        +-------+
+    CPU2                              |xxxx|        |xxxxxxx|
+            --------------------------+----+--------+-------+-------->
+                                        |               |
+                                        v               v
+            +-----------------------------------------------------+
+            |                  Ring buffer 2                      |
+            +-----------------------------------------------------+
+                                        |               |
+                                        v               v
+            +-----------------------------------------------------+
+            |               AUX Ring buffer 2                     |
+            +-----------------------------------------------------+
+
+                              T1
+                       +--------------+
+    CPU3               |xxxxxxxxxxxxxx|
+            -----------+--------------+------------------------------>
+                              |
+                              v
+            +-----------------------------------------------------+
+            |                  Ring buffer 3                      |
+            +-----------------------------------------------------+
+                              |
+                              v
+            +-----------------------------------------------------+
+            |               AUX Ring buffer 3                     |
+            +-----------------------------------------------------+
+
+            T1: Thread 1; T2: Thread 2; T3: Thread 3
+            x: Thread is in running state
+
+                Figure 8. AUX ring buffer for system wide mode
+
+3.2 AUX events
+--------------
+
+Similar to ``perf_output_begin()`` and ``perf_output_end()``'s working for the
+regular ring buffer, ``perf_aux_output_begin()`` and ``perf_aux_output_end()``
+serve for the AUX ring buffer for processing the hardware trace data.
+
+Once the hardware trace data is stored into the AUX ring buffer, the PMU
+driver will stop hardware tracing by calling the ``pmu::stop()`` callback.
+Similar to the regular ring buffer, the AUX ring buffer needs to apply
+the memory synchronization mechanism as discussed in the section
+:ref:`memory_synchronization`.  Since the AUX ring buffer is managed by the
+PMU driver, the barrier (B), which is a writing barrier to ensure the trace
+data is externally visible prior to updating the head pointer, is asked
+to be implemented in the PMU driver.
+
+Then ``pmu::stop()`` can safely call the ``perf_aux_output_end()`` function to
+finish two things:
+
+- It fills an event ``PERF_RECORD_AUX`` into the regular ring buffer, this
+  event delivers the information of the start address and data size for a
+  chunk of hardware trace data has been stored into the AUX ring buffer;
+
+- Since the hardware trace driver has stored new trace data into the AUX
+  ring buffer, the argument *size* indicates how many bytes have been
+  consumed by the hardware tracing, thus ``perf_aux_output_end()`` updates the
+  header pointer ``perf_buffer::aux_head`` to reflect the latest buffer usage.
+
+At the end, the PMU driver will restart hardware tracing.  During this
+temporary suspending period, it will lose hardware trace data, which
+will introduce a discontinuity during decoding phase.
+
+The event ``PERF_RECORD_AUX`` presents an AUX event which is handled in the
+kernel, but it lacks the information for saving the AUX trace data in
+the perf file.  When the perf tool copies the trace data from AUX ring
+buffer to the perf data file, it synthesizes a ``PERF_RECORD_AUXTRACE``
+event which is not a kernel ABI, it's defined by the perf tool to describe
+which portion of data in the AUX ring buffer is saved.  Afterwards, the perf
+tool reads out the AUX trace data from the perf file based on the
+``PERF_RECORD_AUXTRACE`` events, and the ``PERF_RECORD_AUX`` event is used to
+decode a chunk of data by correlating with time order.
+
+3.3 Snapshot mode
+-----------------
+
+Perf supports snapshot mode for AUX ring buffer, in this mode, users
+only record AUX trace data at a specific time point which users are
+interested in.  E.g. below gives an example of how to take snapshots
+with 1 second interval with Arm CoreSight::
+
+  perf record -e cs_etm/@tmc_etr0/u -S -a program &
+  PERFPID=$!
+  while true; do
+      kill -USR2 $PERFPID
+      sleep 1
+  done
+
+The main flow for snapshot mode is:
+
+- Before a snapshot is taken, the AUX ring buffer acts in free run mode.
+  During free run mode the perf doesn't record any of the AUX events and
+  trace data;
+
+- Once the perf tool receives the *USR2* signal, it triggers the callback
+  function ``auxtrace_record::snapshot_start()`` to deactivate hardware
+  tracing.  The kernel driver then populates the AUX ring buffer with the
+  hardware trace data, and the event ``PERF_RECORD_AUX`` is stored in the
+  regular ring buffer;
+
+- Then perf tool takes a snapshot, ``record__read_auxtrace_snapshot()``
+  reads out the hardware trace data from the AUX ring buffer and saves it
+  into perf data file;
+
+- After the snapshot is finished, ``auxtrace_record::snapshot_finish()``
+  restarts the PMU event for AUX tracing.
+
+The perf only accesses the head pointer ``perf_event_mmap_page::aux_head``
+in snapshot mode and doesn’t touch tail pointer ``aux_tail``, this is
+because the AUX ring buffer can overflow in free run mode, the tail
+pointer is useless in this case.  Alternatively, the callback
+``auxtrace_record::find_snapshot()`` is introduced for making the decision
+of whether the AUX ring buffer has been wrapped around or not, at the
+end it fixes up the AUX buffer's head which are used to calculate the
+trace data size.
+
+As we know, the buffers' deployment can be per-thread mode, per-CPU
+mode, or system wide mode, and the snapshot can be applied to any of
+these modes.  Below is an example of taking snapshot with system wide
+mode.
+
+::
+
+                                         Snapshot is taken
+                                                 |
+                                                 v
+                        +------------------------+
+                        |  AUX Ring buffer 0     | <- aux_head
+                        +------------------------+
+                                                 v
+                +--------------------------------+
+                |          AUX Ring buffer 1     | <- aux_head
+                +--------------------------------+
+                                                 v
+    +--------------------------------------------+
+    |                      AUX Ring buffer 2     | <- aux_head
+    +--------------------------------------------+
+                                                 v
+         +---------------------------------------+
+         |                 AUX Ring buffer 3     | <- aux_head
+         +---------------------------------------+
+
+                Figure 9. Snapshot with system wide mode
diff --git linux-libre-6.8-gnu/Documentation/virt/coco/sev-guest.rst linux-libre-6.9-rc6-gnu/Documentation/virt/coco/sev-guest.rst
index 68b0d2363af8..e1eaf6a830ce